summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/power/supply
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
commit2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch)
tree848558de17fb3008cdf4d861b01ac7781903ce39 /Documentation/devicetree/bindings/power/supply
parentInitial commit. (diff)
downloadlinux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz
linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip
Adding upstream version 6.1.76.upstream/6.1.76upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'Documentation/devicetree/bindings/power/supply')
-rw-r--r--Documentation/devicetree/bindings/power/supply/active-semi,act8945a-charger.yaml76
-rw-r--r--Documentation/devicetree/bindings/power/supply/battery.yaml184
-rw-r--r--Documentation/devicetree/bindings/power/supply/bq2415x.yaml97
-rw-r--r--Documentation/devicetree/bindings/power/supply/bq24190.yaml92
-rw-r--r--Documentation/devicetree/bindings/power/supply/bq24257.yaml124
-rw-r--r--Documentation/devicetree/bindings/power/supply/bq24735.yaml89
-rw-r--r--Documentation/devicetree/bindings/power/supply/bq2515x.yaml91
-rw-r--r--Documentation/devicetree/bindings/power/supply/bq256xx.yaml109
-rw-r--r--Documentation/devicetree/bindings/power/supply/bq25890.yaml123
-rw-r--r--Documentation/devicetree/bindings/power/supply/bq25980.yaml114
-rw-r--r--Documentation/devicetree/bindings/power/supply/bq27xxx.yaml95
-rw-r--r--Documentation/devicetree/bindings/power/supply/charger-manager.yaml217
-rw-r--r--Documentation/devicetree/bindings/power/supply/cpcap-battery.yaml87
-rw-r--r--Documentation/devicetree/bindings/power/supply/cpcap-charger.yaml106
-rw-r--r--Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml80
-rw-r--r--Documentation/devicetree/bindings/power/supply/dlg,da9150-charger.yaml52
-rw-r--r--Documentation/devicetree/bindings/power/supply/dlg,da9150-fuel-gauge.yaml51
-rw-r--r--Documentation/devicetree/bindings/power/supply/gpio-charger.yaml94
-rw-r--r--Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml61
-rw-r--r--Documentation/devicetree/bindings/power/supply/isp1704.yaml42
-rw-r--r--Documentation/devicetree/bindings/power/supply/lego,ev3-battery.yaml55
-rw-r--r--Documentation/devicetree/bindings/power/supply/lltc,lt3651-charger.yaml44
-rw-r--r--Documentation/devicetree/bindings/power/supply/lltc,ltc294x.yaml66
-rw-r--r--Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml67
-rw-r--r--Documentation/devicetree/bindings/power/supply/max77650-charger.yaml37
-rw-r--r--Documentation/devicetree/bindings/power/supply/max8925_battery.txt18
-rw-r--r--Documentation/devicetree/bindings/power/supply/maxim,ds2760.yaml43
-rw-r--r--Documentation/devicetree/bindings/power/supply/maxim,max14577.yaml84
-rw-r--r--Documentation/devicetree/bindings/power/supply/maxim,max14656.yaml45
-rw-r--r--Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml97
-rw-r--r--Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml81
-rw-r--r--Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml70
-rw-r--r--Documentation/devicetree/bindings/power/supply/maxim,max77976.yaml44
-rw-r--r--Documentation/devicetree/bindings/power/supply/maxim,max8903.yaml67
-rw-r--r--Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml96
-rw-r--r--Documentation/devicetree/bindings/power/supply/microchip,ucs1002.yaml51
-rw-r--r--Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml48
-rw-r--r--Documentation/devicetree/bindings/power/supply/nokia,n900-battery.yaml49
-rw-r--r--Documentation/devicetree/bindings/power/supply/olpc-battery.yaml27
-rw-r--r--Documentation/devicetree/bindings/power/supply/power-supply.yaml21
-rw-r--r--Documentation/devicetree/bindings/power/supply/qcom,pm8941-charger.yaml178
-rw-r--r--Documentation/devicetree/bindings/power/supply/qcom,pm8941-coincell.yaml57
-rw-r--r--Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml54
-rw-r--r--Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml90
-rw-r--r--Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml163
-rw-r--r--Documentation/devicetree/bindings/power/supply/samsung,battery.yaml56
-rw-r--r--Documentation/devicetree/bindings/power/supply/sbs,sbs-battery.yaml84
-rw-r--r--Documentation/devicetree/bindings/power/supply/sbs,sbs-charger.yaml55
-rw-r--r--Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml105
-rw-r--r--Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml53
-rw-r--r--Documentation/devicetree/bindings/power/supply/sc27xx-fg.yaml98
-rw-r--r--Documentation/devicetree/bindings/power/supply/stericsson,ab8500-battery.txt34
-rw-r--r--Documentation/devicetree/bindings/power/supply/stericsson,ab8500-btemp.yaml77
-rw-r--r--Documentation/devicetree/bindings/power/supply/stericsson,ab8500-chargalg.yaml41
-rw-r--r--Documentation/devicetree/bindings/power/supply/stericsson,ab8500-charger.yaml127
-rw-r--r--Documentation/devicetree/bindings/power/supply/stericsson,ab8500-fg.yaml81
-rw-r--r--Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml182
-rw-r--r--Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml89
-rw-r--r--Documentation/devicetree/bindings/power/supply/tps65090-charger.yaml36
-rw-r--r--Documentation/devicetree/bindings/power/supply/tps65217-charger.yaml43
-rw-r--r--Documentation/devicetree/bindings/power/supply/twl4030-charger.yaml68
-rw-r--r--Documentation/devicetree/bindings/power/supply/x-powers,axp20x-ac-power-supply.yaml35
-rw-r--r--Documentation/devicetree/bindings/power/supply/x-powers,axp20x-battery-power-supply.yaml34
-rw-r--r--Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml37
64 files changed, 4971 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/power/supply/active-semi,act8945a-charger.yaml b/Documentation/devicetree/bindings/power/supply/active-semi,act8945a-charger.yaml
new file mode 100644
index 000000000..5220d9cb1
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/active-semi,act8945a-charger.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/active-semi,act8945a-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Active-semi ACT8945A Charger Function
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: active-semi,act8945a-charger
+
+ interrupts:
+ maxItems: 1
+
+ active-semi,chglev-gpios:
+ maxItems: 1
+ description: charge current level GPIO
+
+ active-semi,lbo-gpios:
+ maxItems: 1
+ description: low battery voltage detect GPIO
+
+ active-semi,input-voltage-threshold-microvolt:
+ description: |
+ Specifies the charger's input over-voltage threshold value.
+ Despite the name, specified values are in millivolt (mV).
+ Defaults to 6.6 V
+ enum: [ 6600, 7000, 7500, 8000 ]
+
+ active-semi,precondition-timeout:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Specifies the charger's PRECONDITION safety timer setting value in minutes.
+ If 0, it means to disable this timer.
+ Defaults to 40 minutes.
+ enum: [ 0, 40, 60, 80 ]
+
+ active-semi,total-timeout:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Specifies the charger's total safety timer setting value in hours;
+ If 0, it means to disable this timer;
+ Defaults to 3 hours.
+ enum: [ 0, 3, 4, 5 ]
+
+required:
+ - compatible
+ - interrupts
+ - active-semi,chglev-gpios
+ - active-semi,lbo-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ pmic {
+ charger {
+ compatible = "active-semi,act8945a-charger";
+ interrupt-parent = <&pioA>;
+ interrupts = <45 IRQ_TYPE_LEVEL_LOW>;
+ active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
+ active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
+ active-semi,input-voltage-threshold-microvolt = <6600>;
+ active-semi,precondition-timeout = <40>;
+ active-semi,total-timeout = <3>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/battery.yaml b/Documentation/devicetree/bindings/power/supply/battery.yaml
new file mode 100644
index 000000000..491488e7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/battery.yaml
@@ -0,0 +1,184 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Battery Characteristics
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+description: |
+ The devicetree battery node provides static battery characteristics.
+ In smart batteries, these are typically stored in non-volatile memory
+ on a fuel gauge chip. The battery node should be used where there is
+ no appropriate non-volatile memory, or it is unprogrammed/incorrect.
+
+ Upstream dts files should not include battery nodes, unless the battery
+ represented cannot easily be replaced in the system by one of a
+ different type. This prevents unpredictable, potentially harmful,
+ behavior should a replacement that changes the battery type occur
+ without a corresponding update to the dtb.
+
+ Battery properties are named, where possible, for the corresponding elements
+ in enum power_supply_property, defined in include/linux/power_supply.h
+
+ Batteries must be referenced by chargers and/or fuel-gauges using a phandle.
+ The phandle's property should be named "monitored-battery".
+
+properties:
+ compatible:
+ const: simple-battery
+
+ device-chemistry:
+ description: This describes the chemical technology of the battery.
+ oneOf:
+ - const: nickel-cadmium
+ - const: nickel-metal-hydride
+ - const: lithium-ion
+ description: This is a blanket type for all lithium-ion batteries,
+ including those below. If possible, a precise compatible string
+ from below should be used, but sometimes it is unknown which specific
+ lithium ion battery is employed and this wide compatible can be used.
+ - const: lithium-ion-polymer
+ - const: lithium-ion-iron-phosphate
+ - const: lithium-ion-manganese-oxide
+
+ over-voltage-threshold-microvolt:
+ description: battery over-voltage limit
+
+ re-charge-voltage-microvolt:
+ description: limit to automatically start charging again
+
+ voltage-min-design-microvolt:
+ description: drained battery voltage
+
+ voltage-max-design-microvolt:
+ description: fully charged battery voltage
+
+ energy-full-design-microwatt-hours:
+ description: battery design energy
+
+ charge-full-design-microamp-hours:
+ description: battery design capacity
+
+ trickle-charge-current-microamp:
+ description: current for trickle-charge phase
+
+ precharge-current-microamp:
+ description: current for pre-charge phase
+
+ precharge-upper-limit-microvolt:
+ description: limit when to change to constant charging
+
+ charge-term-current-microamp:
+ description: current for charge termination phase
+
+ constant-charge-current-max-microamp:
+ description: maximum constant input current
+
+ constant-charge-voltage-max-microvolt:
+ description: maximum constant input voltage
+
+ factory-internal-resistance-micro-ohms:
+ description: battery factory internal resistance
+
+ resistance-temp-table:
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ items:
+ items:
+ - description: the temperature in degree Celsius
+ - description: battery internal resistance percent
+ description: |
+ A table providing the temperature in degree Celsius
+ and corresponding battery internal resistance percent, which is used to
+ look up the resistance percent according to current temperature to get an
+ accurate batterty internal resistance in different temperatures.
+
+ ocv-capacity-celsius:
+ description: |
+ An array containing the temperature in degree Celsius,
+ for each of the battery capacity lookup table.
+
+ operating-range-celsius:
+ description: operating temperature range of a battery
+ items:
+ - description: minimum temperature at which battery can operate
+ - description: maximum temperature at which battery can operate
+
+ ambient-celsius:
+ description: safe range of ambient temperature
+ items:
+ - description: alert when ambient temperature is lower than this value
+ - description: alert when ambient temperature is higher than this value
+
+ alert-celsius:
+ description: safe range of battery temperature
+ items:
+ - description: alert when battery temperature is lower than this value
+ - description: alert when battery temperature is higher than this value
+
+required:
+ - compatible
+
+patternProperties:
+ '^ocv-capacity-table-[0-9]+$':
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ description: |
+ An array providing the open circuit voltage (OCV)
+ of the battery and corresponding battery capacity percent, which is used
+ to look up battery capacity according to current OCV value. And the open
+ circuit voltage unit is microvolt.
+ maxItems: 100
+ items:
+ items:
+ - description: open circuit voltage (OCV) in microvolts
+ - description: battery capacity percent
+ maximum: 100
+
+additionalProperties: false
+
+examples:
+ - |
+ power {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ battery: battery {
+ compatible = "simple-battery";
+ over-voltage-threshold-microvolt = <4500000>;
+ re-charge-voltage-microvolt = <250000>;
+ voltage-min-design-microvolt = <3200000>;
+ voltage-max-design-microvolt = <4200000>;
+ energy-full-design-microwatt-hours = <5290000>;
+ charge-full-design-microamp-hours = <1430000>;
+ precharge-current-microamp = <256000>;
+ precharge-upper-limit-microvolt = <2500000>;
+ charge-term-current-microamp = <128000>;
+ constant-charge-current-max-microamp = <900000>;
+ constant-charge-voltage-max-microvolt = <4200000>;
+ factory-internal-resistance-micro-ohms = <250000>;
+ ocv-capacity-celsius = <(-10) 0 10>;
+ /* table for -10 degree Celsius */
+ ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>;
+ /* table for 0 degree Celsius */
+ ocv-capacity-table-1 = <4200000 100>, <4185000 95>, <4113000 90>;
+ /* table for 10 degree Celsius */
+ ocv-capacity-table-2 = <4250000 100>, <4200000 95>, <4185000 90>;
+ resistance-temp-table = <20 100>, <10 90>, <0 80>, <(-10) 60>;
+ operating-range-celsius = <(-30) 50>;
+ ambient-celsius = <(-5) 50>;
+ alert-celsius = <0 40>;
+ };
+
+ charger@11 {
+ reg = <0x11>;
+ monitored-battery = <&battery>;
+ };
+
+ fuel-gauge@22 {
+ reg = <0x22>;
+ monitored-battery = <&battery>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/bq2415x.yaml b/Documentation/devicetree/bindings/power/supply/bq2415x.yaml
new file mode 100644
index 000000000..a3c00e078
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq2415x.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq2415x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for TI bq2415x Li-Ion Charger
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ enum:
+ - ti,bq24150
+ - ti,bq24150a
+ - ti,bq24151
+ - ti,bq24151a
+ - ti,bq24152
+ - ti,bq24153
+ - ti,bq24153a
+ - ti,bq24155
+ - ti,bq24156
+ - ti,bq24156a
+ - ti,bq24158
+
+ reg:
+ maxItems: 1
+
+ ti,current-limit:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: initial maximum current charger can pull from power supply in mA.
+
+ ti,weak-battery-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ weak battery voltage threshold in mV.
+ The chip will use slow precharge if battery voltage is below this value.
+
+ ti,battery-regulation-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: maximum charging voltage in mV.
+
+ ti,charge-current:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: maximum charging current in mA.
+
+ ti,termination-current:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ charge will be terminated when current in constant-voltage phase drops
+ below this value (in mA).
+
+ ti,resistor-sense:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: value of sensing resistor in milliohm.
+
+ ti,usb-charger-detection:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to usb charger detection device (required for auto mode)
+
+required:
+ - compatible
+ - reg
+ - ti,current-limit
+ - ti,weak-battery-voltage
+ - ti,battery-regulation-voltage
+ - ti,charge-current
+ - ti,termination-current
+ - ti,resistor-sense
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ charger@6b {
+ compatible = "ti,bq24150a";
+ reg = <0x6b>;
+
+ ti,current-limit = <100>;
+ ti,weak-battery-voltage = <3400>;
+ ti,battery-regulation-voltage = <4200>;
+ ti,charge-current = <650>;
+ ti,termination-current = <100>;
+ ti,resistor-sense = <68>;
+
+ ti,usb-charger-detection = <&isp1704>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/bq24190.yaml b/Documentation/devicetree/bindings/power/supply/bq24190.yaml
new file mode 100644
index 000000000..4884ec90e
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq24190.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq24190.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for TI BQ2419x Li-Ion Battery Charger
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ enum:
+ - ti,bq24190
+ - ti,bq24192
+ - ti,bq24192i
+ - ti,bq24196
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ usb-otg-vbus:
+ $ref: /schemas/regulator/regulator.yaml#
+ description: |
+ Regulator that is used to control the VBUS voltage direction for
+ either USB host mode or for charging on the OTG port
+
+ ti,system-minimum-microvolt:
+ description: |
+ when power is connected and the battery is below minimum system voltage,
+ the system will be regulated above this setting.
+
+ omit-battery-class:
+ type: boolean
+ description: |
+ If this property is set, the operating system does not try to create a
+ battery device.
+
+ monitored-battery:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: |
+ phandle to a "simple-battery" compatible node.
+
+ This property must be a phandle to a node using the format described
+ in battery.yaml, with the following properties being required:
+ - precharge-current-microamp: maximum charge current during precharge phase
+ (typically 20% of battery capacity).
+ - charge-term-current-microamp: a charge cycle terminates when the battery voltage is
+ above recharge threshold, and the current is below this
+ setting (typically 10% of battery capacity).
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ bat: battery {
+ compatible = "simple-battery";
+ precharge-current-microamp = <256000>;
+ charge-term-current-microamp = <128000>;
+ };
+
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ charger@6a {
+ compatible = "ti,bq24190";
+ reg = <0x6a>;
+ interrupt-parent = <&gpiochip>;
+ interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
+ monitored-battery = <&bat>;
+ ti,system-minimum-microvolt = <3200000>;
+
+ usb_otg_vbus: usb-otg-vbus { };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/bq24257.yaml b/Documentation/devicetree/bindings/power/supply/bq24257.yaml
new file mode 100644
index 000000000..c7406bef0
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq24257.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq24257.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for bq24250, bq24251 and bq24257 Li-Ion Charger
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ enum:
+ - ti,bq24250
+ - ti,bq24251
+ - ti,bq24257
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ ti,battery-regulation-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: maximum charging voltage in uV
+
+ ti,charge-current:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: maximum charging current in uA
+
+ ti,termination-current:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ charge will be terminated when current in constant-voltage phase
+ drops below this value (in uA)
+
+ pg-gpios:
+ description: |
+ GPIO used for connecting the bq2425x device PG (Power Good) pin.
+ This pin is not available on all devices however it should be used if
+ possible as this is the recommended way to obtain the charger's input PG
+ state. If this pin is not specified a software-based approach for PG
+ detection is used.
+ maxItems: 1
+
+ ti,current-limit:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ The maximum current to be drawn from the charger's input (in uA).
+ If this property is not specified, the input limit current is set
+ automatically using USB D+/D- signal based charger type detection.
+ If the hardware does not support the D+/D- based detection, a default
+ of 500,000 is used (=500mA) instead.
+
+ ti,ovp-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Configures the over voltage protection voltage (in uV).
+ If not specified a default of 6,5000,000 (=6.5V) is used.
+
+ ti,in-dpm-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Configures the threshold input voltage for the dynamic power path management (in uV).
+ If not specified a default of 4,360,000 (=4.36V) is used.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - ti,battery-regulation-voltage
+ - ti,charge-current
+ - ti,termination-current
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ charger@6a {
+ compatible = "ti,bq24257";
+ reg = <0x6a>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <16 IRQ_TYPE_EDGE_BOTH>;
+
+ pg-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+
+ ti,battery-regulation-voltage = <4200000>;
+ ti,charge-current = <1000000>;
+ ti,termination-current = <50000>;
+ };
+ };
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ charger@6a {
+ compatible = "ti,bq24250";
+ reg = <0x6a>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <16 IRQ_TYPE_EDGE_BOTH>;
+
+ ti,battery-regulation-voltage = <4200000>;
+ ti,charge-current = <500000>;
+ ti,termination-current = <50000>;
+ ti,current-limit = <900000>;
+ ti,ovp-voltage = <9500000>;
+ ti,in-dpm-voltage = <4440000>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/bq24735.yaml b/Documentation/devicetree/bindings/power/supply/bq24735.yaml
new file mode 100644
index 000000000..dd9176ce7
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq24735.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq24735.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for TI BQ24735 Li-Ion Battery Charger
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: ti,bq24735
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: AC adapter plug event interrupt
+ maxItems: 1
+
+ ti,ac-detect-gpios:
+ maxItems: 1
+ description: |
+ This GPIO is optionally used to read the AC adapter status. This is a Host GPIO
+ that is configured as an input and connected to the ACOK pin on the bq24735.
+ Note: for backwards compatibility reasons, the GPIO must be active on AC adapter
+ absence despite ACOK being active (high) on AC adapter presence.
+
+ ti,charge-current:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Used to control and set the charging current.
+ This value must be between 128mA and 8.128A with a 64mA step resolution.
+ The POR value is 0x0000h. This number is in mA (e.g. 8192).
+ See spec for more information about the ChargeCurrent (0x14h) register.
+
+ ti,charge-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Used to control and set the charging voltage.
+ This value must be between 1.024V and 19.2V with a 16mV step resolution.
+ The POR value is 0x0000h. This number is in mV (e.g. 19200).
+ See spec for more information about the ChargeVoltage (0x15h) register.
+
+ ti,input-current:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Used to control and set the charger input current.
+ This value must be between 128mA and 8.064A with a 128mA step resolution.
+ The POR value is 0x1000h. This number is in mA (e.g. 8064).
+ See the spec for more information about the InputCurrent (0x3fh) register.
+
+ ti,external-control:
+ type: boolean
+ description: |
+ Indicates that the charger is configured externally and that the host should not
+ attempt to enable/disable charging or set the charge voltage/current.
+
+ poll-interval:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ If 'interrupts' is not specified, poll AC adapter presence with this interval (milliseconds).
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ charger@9 {
+ compatible = "ti,bq24735";
+ reg = <0x9>;
+ ti,ac-detect-gpios = <&gpio 72 0x1>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/bq2515x.yaml b/Documentation/devicetree/bindings/power/supply/bq2515x.yaml
new file mode 100644
index 000000000..1a1b24003
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq2515x.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq2515x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI bq2515x 500-mA Linear charger family
+
+maintainers:
+ - Andrew Davis <afd@ti.com>
+
+description: |
+ The BQ2515x family is a highly integrated battery charge management IC that
+ integrates the most common functions for wearable devices, namely a charger,
+ an output voltage rail, ADC for battery and system monitoring, and
+ push-button controller.
+
+ Specifications about the charger can be found at:
+ http://www.ti.com/lit/ds/symlink/bq25150.pdf
+ http://www.ti.com/lit/ds/symlink/bq25155.pdf
+
+properties:
+ compatible:
+ enum:
+ - ti,bq25150
+ - ti,bq25155
+
+ reg:
+ maxItems: 1
+ description: I2C address of the charger.
+
+ ac-detect-gpios:
+ description: |
+ GPIO used for connecting the bq2515x device PG (AC Detect)
+ pin.
+ maxItems: 1
+
+ reset-gpios:
+ description: GPIO used for hardware reset.
+ maxItems: 1
+
+ powerdown-gpios:
+ description: GPIO used for low power mode of IC.
+ maxItems: 1
+
+ charge-enable-gpios:
+ description: GPIO used to turn on and off charging.
+ maxItems: 1
+
+ input-current-limit-microamp:
+ description: Maximum input current in micro Amps.
+ minimum: 50000
+ maximum: 500000
+
+ monitored-battery:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to the battery node being monitored
+
+required:
+ - compatible
+ - reg
+ - monitored-battery
+
+additionalProperties: false
+
+examples:
+ - |
+ bat: battery {
+ compatible = "simple-battery";
+ constant-charge-current-max-microamp = <50000>;
+ precharge-current-microamp = <2500>;
+ constant-charge-voltage-max-microvolt = <4000000>;
+ };
+ #include <dt-bindings/gpio/gpio.h>
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bq25150: charger@6b {
+ compatible = "ti,bq25150";
+ reg = <0x6b>;
+ monitored-battery = <&bat>;
+ input-current-limit-microamp = <100000>;
+
+ ac-detect-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ powerdown-gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+ charge-enable-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/bq256xx.yaml b/Documentation/devicetree/bindings/power/supply/bq256xx.yaml
new file mode 100644
index 000000000..82f382a7f
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq256xx.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq256xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI bq256xx Switch Mode Buck Charger
+
+maintainers:
+ - Andrew Davis <afd@ti.com>
+
+description: |
+ The bq256xx devices are a family of highly-integrated battery charge
+ management and system power management ICs for single cell Li-ion and Li-
+ polymer batteries.
+
+ Datasheets:
+ - https://www.ti.com/lit/ds/symlink/bq25600.pdf
+ - https://www.ti.com/lit/ds/symlink/bq25601.pdf
+ - https://www.ti.com/lit/ds/symlink/bq25600d.pdf
+ - https://www.ti.com/lit/ds/symlink/bq25601d.pdf
+ - https://www.ti.com/lit/ds/symlink/bq25611d.pdf
+ - https://www.ti.com/lit/ds/symlink/bq25618.pdf
+ - https://www.ti.com/lit/ds/symlink/bq25619.pdf
+
+properties:
+ compatible:
+ enum:
+ - ti,bq25600
+ - ti,bq25601
+ - ti,bq25600d
+ - ti,bq25601d
+ - ti,bq25611d
+ - ti,bq25618
+ - ti,bq25619
+
+ reg:
+ maxItems: 1
+
+ ti,watchdog-timeout-ms:
+ default: 0
+ description: |
+ Watchdog timer in ms. 0 (default) disables the watchdog
+ minimum: 0
+ maximum: 160000
+ enum: [ 0, 40000, 80000, 160000]
+
+ input-voltage-limit-microvolt:
+ description: |
+ Minimum input voltage limit in µV with a 100000 µV step
+ minimum: 3900000
+ maximum: 5400000
+
+ input-current-limit-microamp:
+ description: |
+ Maximum input current limit in µA with a 100000 µA step
+ minimum: 100000
+ maximum: 3200000
+
+ monitored-battery:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to the battery node being monitored
+
+ interrupts:
+ maxItems: 1
+ description: |
+ Interrupt sends an active low, 256 μs pulse to host to report the charger
+ device status and faults.
+
+required:
+ - compatible
+ - reg
+ - monitored-battery
+
+additionalProperties: false
+
+examples:
+ - |
+ bat: battery {
+ compatible = "simple-battery";
+ constant-charge-current-max-microamp = <2040000>;
+ constant-charge-voltage-max-microvolt = <4352000>;
+ precharge-current-microamp = <180000>;
+ charge-term-current-microamp = <180000>;
+ };
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+
+ clock-frequency = <400000>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ charger@6b {
+ compatible = "ti,bq25601";
+ reg = <0x6b>;
+ monitored-battery = <&bat>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+ ti,watchdog-timeout-ms = <40000>;
+
+ input-voltage-limit-microvolt = <4500000>;
+ input-current-limit-microamp = <2400000>;
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/power/supply/bq25890.yaml b/Documentation/devicetree/bindings/power/supply/bq25890.yaml
new file mode 100644
index 000000000..204c01471
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq25890.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq25890.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for bq25890, bq25892, bq25895 and bq25896 Li-Ion Charger
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ enum:
+ - ti,bq25890
+ - ti,bq25892
+ - ti,bq25895
+ - ti,bq25896
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ ti,battery-regulation-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: maximum charging voltage (in uV)
+
+ ti,charge-current:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: maximum charging current (in uA)
+
+ ti,termination-current:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ charge will be terminated when current in constant-voltage phase
+ drops below this value (in uA)
+
+ ti,precharge-current:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: maximum charge current during precharge phase (in uA)
+
+ ti,minimum-sys-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ when battery is charging and it is below minimum system voltage,
+ the system will be regulated above minimum-sys-voltage setting (in uV)
+
+ ti,boost-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: VBUS voltage level in boost mode (in uV)
+
+ ti,boost-max-current:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: maximum allowed current draw in boost mode (in uA)
+
+ ti,boost-low-freq:
+ description: boost mode frequency will be 500kHz, otherwise 1.5MHz
+ type: boolean
+
+ ti,use-ilim-pin:
+ description: |
+ ILIM resistor will be used and the input current will be the lower
+ between the resistor setting and the IINLIM register setting
+ type: boolean
+
+ ti,thermal-regulation-threshold:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ temperature above which the charge current is lowered, to avoid overheating
+ (in degrees Celsius). If omitted, the default setting will be used (120 degrees)
+
+ ti,ibatcomp-micro-ohms:
+ description: value of a resistor in series with the battery (in Micro Ohms)
+
+ ti,ibatcomp-clamp-microvolt:
+ description: max. charging voltage adjustment due to expected voltage drop on in-series resistor
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - ti,battery-regulation-voltage
+ - ti,charge-current
+ - ti,termination-current
+ - ti,precharge-current
+ - ti,minimum-sys-voltage
+ - ti,boost-voltage
+ - ti,boost-max-current
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ charger@6a {
+ compatible = "ti,bq25890";
+ reg = <0x6a>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+
+ ti,battery-regulation-voltage = <4200000>;
+ ti,charge-current = <1000000>;
+ ti,termination-current = <50000>;
+ ti,precharge-current = <128000>;
+ ti,minimum-sys-voltage = <3600000>;
+ ti,boost-voltage = <5000000>;
+ ti,boost-max-current = <1000000>;
+
+ ti,use-ilim-pin;
+ ti,thermal-regulation-threshold = <120>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/bq25980.yaml b/Documentation/devicetree/bindings/power/supply/bq25980.yaml
new file mode 100644
index 000000000..b687b8bcd
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq25980.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq25980.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI BQ25980 Flash Charger
+
+maintainers:
+ - Andrew Davis <afd@ti.com>
+
+description: |
+ The BQ25980, BQ25975, and BQ25960 are a series of flash chargers intended
+ for use in high-power density portable electronics. These inductorless
+ switching chargers can provide over 97% efficiency by making use of the
+ switched capacitor architecture.
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ enum:
+ - ti,bq25980
+ - ti,bq25975
+ - ti,bq25960
+
+ reg:
+ maxItems: 1
+
+ ti,watchdog-timeout-ms:
+ description: |
+ Watchdog timer in milli seconds. 0 disables the watchdog.
+ default: 0
+ minimum: 0
+ maximum: 300000
+ enum: [ 0, 5000, 10000, 50000, 300000]
+
+ ti,sc-ovp-limit-microvolt:
+ description: |
+ Minimum input voltage limit in micro volts with a when the charger is in
+ switch cap mode. 100000 micro volt step.
+ default: 17800000
+ minimum: 14000000
+ maximum: 22000000
+
+ ti,sc-ocp-limit-microamp:
+ description: |
+ Maximum input current limit in micro amps with a 100000 micro amp step.
+ minimum: 100000
+ maximum: 3300000
+
+ ti,bypass-ovp-limit-microvolt:
+ description: |
+ Minimum input voltage limit in micro volts with a when the charger is in
+ switch cap mode. 50000 micro volt step.
+ minimum: 7000000
+ maximum: 12750000
+
+ ti,bypass-ocp-limit-microamp:
+ description: |
+ Maximum input current limit in micro amps with a 100000 micro amp step.
+ minimum: 100000
+ maximum: 3300000
+
+ ti,bypass-enable:
+ type: boolean
+ description: Enables bypass mode at boot time
+
+ interrupts:
+ maxItems: 1
+ description: |
+ Indicates that the device state has changed.
+
+ monitored-battery:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to the battery node being monitored
+
+required:
+ - compatible
+ - reg
+ - monitored-battery
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ bat: battery {
+ compatible = "simple-battery";
+ constant-charge-current-max-microamp = <4000000>;
+ constant-charge-voltage-max-microvolt = <8400000>;
+ precharge-current-microamp = <160000>;
+ charge-term-current-microamp = <160000>;
+ };
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bq25980: charger@65 {
+ compatible = "ti,bq25980";
+ reg = <0x65>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+ ti,watchdog-timeout-ms = <0>;
+ ti,sc-ocp-limit-microamp = <2000000>;
+ ti,sc-ovp-limit-microvolt = <17800000>;
+ monitored-battery = <&bat>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml b/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml
new file mode 100644
index 000000000..65fc6049e
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq27xxx.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2020 Texas Instruments Incorporated
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/bq27xxx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI BQ27XXX fuel gauge family
+
+maintainers:
+ - Pali Rohár <pali@kernel.org>
+ - Andrew F. Davis <afd@ti.com>
+ - Sebastian Reichel <sre@kernel.org>
+
+description: |
+ Support various Texas Instruments fuel gauge devices that share similar
+ register maps and power supply properties
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ enum:
+ - ti,bq27200
+ - ti,bq27210
+ - ti,bq27500 # deprecated, use revision specific property below
+ - ti,bq27510 # deprecated, use revision specific property below
+ - ti,bq27520 # deprecated, use revision specific property below
+ - ti,bq27500-1
+ - ti,bq27510g1
+ - ti,bq27510g2
+ - ti,bq27510g3
+ - ti,bq27520g1
+ - ti,bq27520g2
+ - ti,bq27520g3
+ - ti,bq27520g4
+ - ti,bq27521
+ - ti,bq27530
+ - ti,bq27531
+ - ti,bq27541
+ - ti,bq27542
+ - ti,bq27546
+ - ti,bq27742
+ - ti,bq27545
+ - ti,bq27411
+ - ti,bq27421
+ - ti,bq27425
+ - ti,bq27426
+ - ti,bq27441
+ - ti,bq27621
+ - ti,bq27z561
+ - ti,bq28z610
+ - ti,bq34z100
+ - ti,bq78z100
+
+ reg:
+ maxItems: 1
+ description: integer, I2C address of the fuel gauge.
+
+ monitored-battery:
+ description: |
+ phandle of battery characteristics node.
+ The fuel gauge uses the following battery properties:
+ - energy-full-design-microwatt-hours
+ - charge-full-design-microamp-hours
+ - voltage-min-design-microvolt
+ Both or neither of the *-full-design-*-hours properties must be set.
+ See Documentation/devicetree/bindings/power/supply/battery.yaml
+
+ power-supplies: true
+
+required:
+ - compatible
+ - reg
+additionalProperties: false
+
+examples:
+ - |
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ bat: battery {
+ compatible = "simple-battery";
+ voltage-min-design-microvolt = <3200000>;
+ energy-full-design-microwatt-hours = <5290000>;
+ charge-full-design-microamp-hours = <1430000>;
+ };
+
+ bq27510g3: fuel-gauge@55 {
+ compatible = "ti,bq27510g3";
+ reg = <0x55>;
+ monitored-battery = <&bat>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/charger-manager.yaml b/Documentation/devicetree/bindings/power/supply/charger-manager.yaml
new file mode 100644
index 000000000..5af1e0bea
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/charger-manager.yaml
@@ -0,0 +1,217 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/charger-manager.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Charger Manager
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+description: |
+ Binding for the legacy charger manager driver.
+ Please do not use for new products.
+
+properties:
+ compatible:
+ const: charger-manager
+
+ cm-chargers:
+ description: name of chargers
+ $ref: /schemas/types.yaml#/definitions/string-array
+
+ cm-num-chargers:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ deprecated: true
+
+ cm-fuel-gauge:
+ description: name of battery fuel gauge
+ $ref: /schemas/types.yaml#/definitions/string
+
+ cm-name:
+ description: name of the charger manager
+ default: battery
+ $ref: /schemas/types.yaml#/definitions/string
+
+ cm-poll-mode:
+ description: polling mode
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 0
+ enum:
+ - 0 # disabled
+ - 1 # always
+ - 2 # when external power is connected
+ - 3 # when charging
+
+ cm-poll-interval:
+ description: polling interval (in ms)
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ cm-battery-stat:
+ description: battery status
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum:
+ - 0 # battery always present
+ - 1 # no battery
+ - 2 # check presence via fuel gauge
+ - 3 # check presence via charger
+
+ cm-fullbatt-vchkdrop-volt:
+ description: voltage drop before restarting charging in uV
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ cm-fullbatt-vchkdrop-ms:
+ deprecated: true
+
+ cm-fullbatt-voltage:
+ description: voltage of full battery in uV
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ cm-fullbatt-soc:
+ description: state of charge to consider as full battery in %
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ cm-fullbatt-capacity:
+ description: capcity to consider as full battery in uAh
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ cm-thermal-zone:
+ description: name of external thermometer's thermal zone
+ $ref: /schemas/types.yaml#/definitions/string
+
+ cm-discharging-max:
+ description: limits of discharging duration in ms
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ cm-charging-max:
+ description: limits of charging duration in ms
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ cm-battery-cold:
+ description: critical cold temperature of battery for charging in deci-degree celsius
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ cm-battery-cold-in-minus:
+ description: if set cm-battery-cold temperature is in minus degrees
+ type: boolean
+
+ cm-battery-hot:
+ description: critical hot temperature of battery for charging in deci-degree celsius
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ cm-battery-temp-diff:
+ description: temperature difference to allow recharging in deci-degree celsius
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+patternProperties:
+ "-supply$":
+ description: regulator consumer, named according to cm-regulator-name
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ "^regulator[@-][0-9]$":
+ type: object
+ properties:
+ cm-regulator-name:
+ description: name of charger regulator
+ $ref: /schemas/types.yaml#/definitions/string
+
+ required:
+ - cm-regulator-name
+
+ additionalProperties: false
+
+ patternProperties:
+ "^cable[@-][0-9]$":
+ type: object
+ properties:
+ cm-cable-name:
+ description: name of charger cable
+ enum:
+ - USB
+ - USB-HOST
+ - SDP
+ - DCP
+ - CDP
+ - ACA
+ - FAST-CHARGER
+ - SLOW-CHARGER
+ - WPT
+ - PD
+ - DOCK
+ - JIG
+ - MECHANICAL
+
+ cm-cable-extcon:
+ description: name of extcon dev
+ $ref: /schemas/types.yaml#/definitions/string
+
+ cm-cable-min:
+ description: minimum current of cable in uA
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ cm-cable-max:
+ description: maximum current of cable in uA
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ required:
+ - cm-cable-name
+ - cm-cable-extcon
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - cm-chargers
+ - cm-fuel-gauge
+
+additionalProperties: false
+
+examples:
+ - |
+ charger-manager {
+ compatible = "charger-manager";
+ chg-reg-supply = <&charger_regulator>;
+
+ cm-name = "battery";
+ /* Always polling ON : 30s */
+ cm-poll-mode = <1>;
+ cm-poll-interval = <30000>;
+
+ cm-fullbatt-vchkdrop-volt = <150000>;
+ cm-fullbatt-soc = <100>;
+
+ cm-battery-stat = <3>;
+
+ cm-chargers = "charger0", "charger1", "charger2";
+
+ cm-fuel-gauge = "fuelgauge0";
+
+ cm-thermal-zone = "thermal_zone.1";
+ /* in deci centigrade */
+ cm-battery-cold = <50>;
+ cm-battery-cold-in-minus;
+ cm-battery-hot = <800>;
+ cm-battery-temp-diff = <100>;
+
+ /* Allow charging for 5hr */
+ cm-charging-max = <18000000>;
+ /* Allow discharging for 2hr */
+ cm-discharging-max = <7200000>;
+
+ regulator-0 {
+ cm-regulator-name = "chg-reg";
+ cable-0 {
+ cm-cable-name = "USB";
+ cm-cable-extcon = "extcon-dev.0";
+ cm-cable-min = <475000>;
+ cm-cable-max = <500000>;
+ };
+ cable-1 {
+ cm-cable-name = "SDP";
+ cm-cable-extcon = "extcon-dev.0";
+ cm-cable-min = <650000>;
+ cm-cable-max = <675000>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/cpcap-battery.yaml b/Documentation/devicetree/bindings/power/supply/cpcap-battery.yaml
new file mode 100644
index 000000000..694bfdb58
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/cpcap-battery.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/cpcap-battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Motorola CPCAP PMIC battery
+
+maintainers:
+ - Tony Lindgren <tony@atomide.com>
+ - Sebastian Reichel <sre@kernel.org>
+
+description: |
+ Motorola CPCAP is a PMIC found in some mobile phones, e.g.
+ the Droid 4. This binding describes its battery fuel gauge
+ sub-function.
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: motorola,cpcap-battery
+
+ interrupts:
+ items:
+ - description: eol interrupt
+ - description: low battery percentage interrupt
+ - description: critical battery percentage interrupt
+ - description: charger detect interrupt
+ - description: battery detect interrupt
+ - description: coulomb counter calibration interrupt
+
+ interrupt-names:
+ items:
+ - const: eol
+ - const: lowbph
+ - const: lowbpl
+ - const: chrgcurr1
+ - const: battdetb
+ - const: cccal
+
+ io-channels:
+ items:
+ - description: battery temperature
+ - description: battery voltage
+ - description: battery charge current
+ - description: battery current
+
+ io-channel-names:
+ items:
+ - const: battdetb
+ - const: battp
+ - const: chg_isense
+ - const: batti
+
+ power-supplies: true
+
+required:
+ - compatible
+ - interrupts
+ - interrupt-names
+ - io-channels
+ - io-channel-names
+ - power-supplies
+
+additionalProperties: false
+
+examples:
+ - |
+ cpcap {
+ battery {
+ compatible = "motorola,cpcap-battery";
+ interrupts-extended =
+ <&cpcap 6 0>, <&cpcap 5 0>, <&cpcap 3 0>,
+ <&cpcap 20 0>, <&cpcap 54 0>, <&cpcap 57 0>;
+ interrupt-names =
+ "eol", "lowbph", "lowbpl",
+ "chrgcurr1", "battdetb", "cccal";
+ io-channels = <&cpcap_adc 0>, <&cpcap_adc 1>,
+ <&cpcap_adc 5>, <&cpcap_adc 6>;
+ io-channel-names = "battdetb", "battp",
+ "chg_isense", "batti";
+ power-supplies = <&cpcap_charger>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/cpcap-charger.yaml b/Documentation/devicetree/bindings/power/supply/cpcap-charger.yaml
new file mode 100644
index 000000000..7e6bf30a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/cpcap-charger.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/cpcap-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Motorola CPCAP PMIC charger
+
+maintainers:
+ - Tony Lindgren <tony@atomide.com>
+ - Sebastian Reichel <sre@kernel.org>
+
+description: |
+ Motorola CPCAP is a PMIC found in some mobile phones, e.g.
+ the Droid 4. This binding describes its battery charger
+ sub-function.
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: motorola,mapphone-cpcap-charger
+
+ interrupts:
+ items:
+ - description: charger detection interrupt
+ - description: reverse charge interrupt
+ - description: SE1 charger detection interrupt
+ - description: SE0 charger detection interrupt
+ - description: reverse mode interrupt
+ - description: charge current 2 interrupt
+ - description: charge current 1 interrupt
+ - description: VBUS valid interrupt
+ - description: battery detect interrupt
+
+ interrupt-names:
+ items:
+ - const: chrg_det
+ - const: rvrs_chrg
+ - const: chrg_se1b
+ - const: se0conn
+ - const: rvrs_mode
+ - const: chrgcurr2
+ - const: chrgcurr1
+ - const: vbusvld
+ - const: battdetb
+
+ io-channels:
+ items:
+ - description: battery temperature
+ - description: battery voltage
+ - description: VBUS voltage
+ - description: battery charge current
+ - description: battery current
+
+ io-channel-names:
+ items:
+ - const: battdetb
+ - const: battp
+ - const: vbus
+ - const: chg_isense
+ - const: batti
+
+ mode-gpios:
+ description: |
+ Optionally CPCAP charger can have a companion wireless
+ charge controller that is controlled with two GPIOs
+ that are active low.
+ minItems: 2
+ maxItems: 2
+
+required:
+ - compatible
+ - interrupts
+ - interrupt-names
+ - io-channels
+ - io-channel-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ cpcap {
+ charger {
+ compatible = "motorola,mapphone-cpcap-charger";
+ interrupts-extended =
+ <&cpcap 13 0>, <&cpcap 12 0>, <&cpcap 29 0>, <&cpcap 28 0>,
+ <&cpcap 22 0>, <&cpcap 21 0>, <&cpcap 20 0>, <&cpcap 19 0>,
+ <&cpcap 54 0>;
+ interrupt-names =
+ "chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn",
+ "rvrs_mode", "chrgcurr2", "chrgcurr1", "vbusvld",
+ "battdetb";
+ mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>,
+ <&gpio3 23 GPIO_ACTIVE_LOW>;
+ io-channels = <&cpcap_adc 0>, <&cpcap_adc 1>,
+ <&cpcap_adc 2>, <&cpcap_adc 5>,
+ <&cpcap_adc 6>;
+ io-channel-names = "battdetb", "battp",
+ "vbus", "chg_isense",
+ "batti";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
new file mode 100644
index 000000000..dc697b614
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/cw2015_battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Battery driver for CW2015 shuntless fuel gauge by CellWise.
+
+maintainers:
+ - Tobias Schramm <t.schramm@manjaro.org>
+
+description: |
+ The driver can utilize information from a simple-battery linked via a
+ phandle in monitored-battery. If specified the driver uses the
+ charge-full-design-microamp-hours property of the battery.
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: cellwise,cw2015
+
+ reg:
+ maxItems: 1
+
+ cellwise,battery-profile:
+ description: |
+ This property specifies characteristics of the battery used. The format
+ of this binary blob is kept secret by CellWise. The only way to obtain
+ it is to mail two batteries to a test facility of CellWise and receive
+ back a test report with the binary blob.
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ minItems: 64
+ maxItems: 64
+
+ cellwise,monitor-interval-ms:
+ description:
+ Specifies the interval in milliseconds gauge values are polled at
+ minimum: 250
+
+ power-supplies:
+ minItems: 1
+ maxItems: 8 # Should be enough
+
+ monitored-battery:
+ description:
+ Specifies the phandle of a simple-battery connected to this gauge
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cw2015@62 {
+ compatible = "cellwise,cw2015";
+ reg = <0x62>;
+ cellwise,battery-profile = /bits/ 8 <
+ 0x17 0x67 0x80 0x73 0x6E 0x6C 0x6B 0x63
+ 0x77 0x51 0x5C 0x58 0x50 0x4C 0x48 0x36
+ 0x15 0x0C 0x0C 0x19 0x5B 0x7D 0x6F 0x69
+ 0x69 0x5B 0x0C 0x29 0x20 0x40 0x52 0x59
+ 0x57 0x56 0x54 0x4F 0x3B 0x1F 0x7F 0x17
+ 0x06 0x1A 0x30 0x5A 0x85 0x93 0x96 0x2D
+ 0x48 0x77 0x9C 0xB3 0x80 0x52 0x94 0xCB
+ 0x2F 0x00 0x64 0xA5 0xB5 0x11 0xF0 0x11
+ >;
+ cellwise,monitor-interval-ms = <5000>;
+ monitored-battery = <&bat>;
+ power-supplies = <&mains_charger>, <&usb_charger>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/dlg,da9150-charger.yaml b/Documentation/devicetree/bindings/power/supply/dlg,da9150-charger.yaml
new file mode 100644
index 000000000..b28938895
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/dlg,da9150-charger.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/dlg,da9150-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog Semiconductor DA9150 Charger Power Supply bindings
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: dlg,da9150-charger
+
+ io-channels:
+ items:
+ - description: ADC channel for current
+ - description: ADC channel for bus voltage
+ - description: ADC channel for junction temperature
+ - description: ADC channel for battery voltage
+
+ io-channel-names:
+ items:
+ - const: CHAN_IBUS
+ - const: CHAN_VBUS
+ - const: CHAN_TJUNC
+ - const: CHAN_VBAT
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ pmic {
+ charger {
+ compatible = "dlg,da9150-charger";
+ io-channels = <&gpadc 0>,
+ <&gpadc 2>,
+ <&gpadc 8>,
+ <&gpadc 5>;
+ io-channel-names = "CHAN_IBUS",
+ "CHAN_VBUS",
+ "CHAN_TJUNC",
+ "CHAN_VBAT";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/dlg,da9150-fuel-gauge.yaml b/Documentation/devicetree/bindings/power/supply/dlg,da9150-fuel-gauge.yaml
new file mode 100644
index 000000000..d47caf59d
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/dlg,da9150-fuel-gauge.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/dlg,da9150-fuel-gauge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog Semiconductor DA9150 Fuel-Gauge Power Supply bindings
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: dlg,da9150-fuel-gauge
+
+ dlg,update-interval:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Interval time (milliseconds) between battery level checks.
+
+ dlg,warn-soc-level:
+ $ref: /schemas/types.yaml#/definitions/uint8
+ minimum: 1
+ maximum: 100
+ description: Battery discharge level (%) where warning event raised.
+
+ dlg,crit-soc-level:
+ $ref: /schemas/types.yaml#/definitions/uint8
+ minimum: 1
+ maximum: 100
+ description: |
+ Battery discharge level (%) where critical event raised.
+ This value should be lower than the warning level.
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ pmic {
+ battery {
+ compatible = "dlg,da9150-fuel-gauge";
+ dlg,update-interval = <10000>;
+ dlg,warn-soc-level = /bits/ 8 <15>;
+ dlg,crit-soc-level = /bits/ 8 <5>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml b/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml
new file mode 100644
index 000000000..89f8e2bcb
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/gpio-charger.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/gpio-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: simple battery chargers only communicating through GPIOs
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+description:
+ This binding is for all chargers, which are working more or less
+ autonomously, only providing some status GPIOs and possibly some
+ GPIOs for limited control over the charging process.
+
+properties:
+ compatible:
+ const: gpio-charger
+
+ charger-type:
+ enum:
+ - unknown
+ - battery
+ - ups
+ - mains
+ - usb-sdp # USB standard downstream port
+ - usb-dcp # USB dedicated charging port
+ - usb-cdp # USB charging downstream port
+ - usb-aca # USB accessory charger adapter
+ description:
+ Type of the charger, e.g. "mains" for a wall charger.
+
+ gpios:
+ maxItems: 1
+ description: GPIO indicating the charger presence
+
+ charge-status-gpios:
+ maxItems: 1
+ description: GPIO indicating the charging status
+
+ charge-current-limit-gpios:
+ minItems: 1
+ maxItems: 32
+ description: GPIOs used for current limiting
+
+ charge-current-limit-mapping:
+ description: List of tuples with current in uA and a GPIO bitmap (in
+ this order). The tuples must be provided in descending order of the
+ current limit.
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ items:
+ items:
+ - description:
+ Current limit in uA
+ - description:
+ Encoded GPIO setting. Bit 0 represents last GPIO from the
+ charge-current-limit-gpios property. Bit 1 second to last
+ GPIO and so on.
+
+required:
+ - compatible
+
+anyOf:
+ - required:
+ - gpios
+ - required:
+ - charge-status-gpios
+ - required:
+ - charge-current-limit-gpios
+
+dependencies:
+ charge-current-limit-gpios: [ charge-current-limit-mapping ]
+ charge-current-limit-mapping: [ charge-current-limit-gpios ]
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ charger {
+ compatible = "gpio-charger";
+ charger-type = "usb-sdp";
+
+ gpios = <&gpd 28 GPIO_ACTIVE_LOW>;
+ charge-status-gpios = <&gpc 27 GPIO_ACTIVE_LOW>;
+
+ charge-current-limit-gpios = <&gpioA 11 GPIO_ACTIVE_HIGH>,
+ <&gpioA 12 GPIO_ACTIVE_HIGH>;
+ charge-current-limit-mapping = <2500000 0x00>, // 2.5 A => both GPIOs low
+ <700000 0x01>, // 700 mA => GPIO A.12 high
+ <0 0x02>; // 0 mA => GPIO A.11 high
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml b/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml
new file mode 100644
index 000000000..46527038b
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/ingenic,battery.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019-2020 Artur Rojek
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/ingenic,battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic JZ47xx battery bindings
+
+maintainers:
+ - Artur Rojek <contact@artur-rojek.eu>
+
+properties:
+ compatible:
+ oneOf:
+ - const: ingenic,jz4740-battery
+ - items:
+ - enum:
+ - ingenic,jz4725b-battery
+ - ingenic,jz4770-battery
+ - const: ingenic,jz4740-battery
+
+ io-channels:
+ maxItems: 1
+
+ io-channel-names:
+ const: battery
+
+ monitored-battery:
+ description: >
+ phandle to a "simple-battery" compatible node.
+
+ This property must be a phandle to a node using the format described
+ in battery.yaml, with the following properties being required:
+ - voltage-min-design-microvolt: drained battery voltage,
+ - voltage-max-design-microvolt: fully charged battery voltage.
+
+required:
+ - compatible
+ - io-channels
+ - io-channel-names
+ - monitored-battery
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/iio/adc/ingenic,adc.h>
+
+ simple_battery: battery {
+ compatible = "simple-battery";
+ voltage-min-design-microvolt = <3600000>;
+ voltage-max-design-microvolt = <4200000>;
+ };
+
+ ingenic-battery {
+ compatible = "ingenic,jz4740-battery";
+ io-channels = <&adc INGENIC_ADC_BATTERY>;
+ io-channel-names = "battery";
+ monitored-battery = <&simple_battery>;
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/isp1704.yaml b/Documentation/devicetree/bindings/power/supply/isp1704.yaml
new file mode 100644
index 000000000..7e3449ed7
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/isp1704.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/isp1704.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for NXP ISP1704 USB Charger Detection
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: nxp,isp1704
+
+ nxp,enable-gpio:
+ maxItems: 1
+ description: GPIO connected to the chip's enable pin
+
+ usb-phy:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: USB PHY the ISP1704 is connected to
+
+required:
+ - compatible
+ - nxp,enable-gpio
+ - usb-phy
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ charger-detect {
+ compatible = "nxp,isp1704";
+ nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_LOW>;
+ usb-phy = <&usb2_phy>;
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/lego,ev3-battery.yaml b/Documentation/devicetree/bindings/power/supply/lego,ev3-battery.yaml
new file mode 100644
index 000000000..a99d989f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/lego,ev3-battery.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/lego,ev3-battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LEGO MINDSTORMS EV3 Battery
+
+maintainers:
+ - David Lechner <david@lechnology.com>
+ - Sebastian Reichel <sre@kernel.org>
+
+description: |
+ LEGO MINDSTORMS EV3 has some built-in capability for monitoring the battery.
+ It uses 6 AA batteries or a special Li-ion rechargeable battery pack that is
+ detected by a key switch in the battery compartment.
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: lego,ev3-battery
+
+ io-channels:
+ items:
+ - description: ADC channel for battery voltage
+ - description: ADC channel for battery current
+
+ io-channel-names:
+ items:
+ - const: voltage
+ - const: current
+
+ rechargeable-gpios:
+ maxItems: 1
+ description: Rechargeable battery indication gpio
+
+required:
+ - compatible
+ - io-channels
+ - io-channel-names
+ - rechargeable-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ battery {
+ compatible = "lego,ev3-battery";
+ io-channels = <&adc 4>, <&adc 3>;
+ io-channel-names = "voltage", "current";
+ rechargeable-gpios = <&gpio 136 GPIO_ACTIVE_LOW>;
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/lltc,lt3651-charger.yaml b/Documentation/devicetree/bindings/power/supply/lltc,lt3651-charger.yaml
new file mode 100644
index 000000000..76cedf95a
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/lltc,lt3651-charger.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/lltc,lt3651-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices LT3651 Charger Power Supply bindings
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ enum:
+ - lltc,lt3651-charger
+ - lltc,ltc3651-charger # deprecated, use lltc,lt3651-charger
+
+ lltc,acpr-gpios:
+ maxItems: 1
+
+ lltc,fault-gpios:
+ maxItems: 1
+
+ lltc,chrg-gpios:
+ maxItems: 1
+
+required:
+ - compatible
+ - lltc,acpr-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ charger {
+ compatible = "lltc,lt3651-charger";
+ lltc,acpr-gpios = <&gpio0 68 GPIO_ACTIVE_LOW>;
+ lltc,fault-gpios = <&gpio0 64 GPIO_ACTIVE_LOW>;
+ lltc,chrg-gpios = <&gpio0 63 GPIO_ACTIVE_LOW>;
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/lltc,ltc294x.yaml b/Documentation/devicetree/bindings/power/supply/lltc,ltc294x.yaml
new file mode 100644
index 000000000..109b41a0d
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/lltc,ltc294x.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/lltc,ltc294x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for LTC2941, LTC2942, LTC2943 and LTC2944 battery fuel gauges
+
+description: |
+ All chips measure battery capacity.
+ The LTC2942 is pin compatible with the LTC2941, it adds voltage and
+ temperature monitoring, and is runtime detected. LTC2943 and LTC2944
+ are software compatible, uses a slightly different conversion formula
+ for the charge counter and adds voltage, current and temperature monitoring.
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ enum:
+ - lltc,ltc2941
+ - lltc,ltc2942
+ - lltc,ltc2943
+ - lltc,ltc2944
+
+ reg:
+ maxItems: 1
+
+ lltc,resistor-sense:
+ $ref: /schemas/types.yaml#/definitions/int32
+ description: |
+ Sense resistor value in milli-ohms.
+ Can be negative value when the battery has been connected to the wrong end of the resistor.
+
+ lltc,prescaler-exponent:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ The prescaler exponent as explained in the datasheet.
+ This determines the range and accuracy of the gauge.
+ The value is programmed into the chip only if it differs from the current setting.
+ The setting is lost when the battery is disconnected.
+
+required:
+ - compatible
+ - reg
+ - lltc,resistor-sense
+ - lltc,prescaler-exponent
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ battery@64 {
+ compatible = "lltc,ltc2943";
+ reg = <0x64>;
+ lltc,resistor-sense = <15>;
+ lltc,prescaler-exponent = <5>; /* 2^(2*5) = 1024 */
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml b/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml
new file mode 100644
index 000000000..cfffaeef8
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/ltc4162-l.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2020 Topic Embedded Products
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/ltc4162-l.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Linear Technology (Analog Devices) LTC4162-L Charger
+
+maintainers:
+ - Mike Looijmans <mike.looijmans@topic.nl>
+
+description: |
+ The LTC ® 4162-L is an advanced monolithic synchronous step-down switching
+ battery charger and PowerPath (TM) manager that seamlessly manages power
+ distribution between input sources such as wall adapters, backplanes, solar
+ panels, etc., and a rechargeable Lithium-Ion/Polymer battery.
+
+ Specifications about the charger can be found at:
+ https://www.analog.com/en/products/ltc4162-s.html
+
+properties:
+ compatible:
+ enum:
+ - lltc,ltc4162-l
+
+ reg:
+ maxItems: 1
+ description: I2C address of the charger.
+
+ lltc,rsnsb-micro-ohms:
+ description: Battery sense resistor in microohm.
+ minimum: 1000
+
+ lltc,rsnsi-micro-ohms:
+ description: Input current sense resistor in microohm.
+ minimum: 1000
+
+ lltc,cell-count:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Number of battery cells. If not provided, will be obtained from the chip
+ once the external power is applied. Omit this when the number of cells
+ is somewhat dynamic. Without it, several measurements will return 0 until
+ the charger is connected to an external supply.
+
+required:
+ - compatible
+ - reg
+ - lltc,rsnsb-micro-ohms
+ - lltc,rsnsi-micro-ohms
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ charger: battery-charger@68 {
+ compatible = "lltc,ltc4162-l";
+ reg = <0x68>;
+ lltc,rsnsb-micro-ohms = <10000>;
+ lltc,rsnsi-micro-ohms = <16000>;
+ lltc,cell-count = <2>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml b/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml
new file mode 100644
index 000000000..62eeddb65
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/max77650-charger.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/max77650-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Battery charger driver for MAX77650 PMIC from Maxim Integrated.
+
+maintainers:
+ - Bartosz Golaszewski <bgolaszewski@baylibre.com>
+
+description: |
+ This module is part of the MAX77650 MFD device. For more details
+ see Documentation/devicetree/bindings/mfd/max77650.yaml.
+
+ The charger is represented as a sub-node of the PMIC node on the device tree.
+
+properties:
+ compatible:
+ const: maxim,max77650-charger
+
+ input-voltage-min-microvolt:
+ description:
+ Minimum CHGIN regulation voltage.
+ enum: [ 4000000, 4100000, 4200000, 4300000,
+ 4400000, 4500000, 4600000, 4700000 ]
+
+ input-current-limit-microamp:
+ description:
+ CHGIN input current limit (in microamps).
+ enum: [ 95000, 190000, 285000, 380000, 475000 ]
+
+required:
+ - compatible
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/power/supply/max8925_battery.txt b/Documentation/devicetree/bindings/power/supply/max8925_battery.txt
new file mode 100644
index 000000000..d7e3e0c0f
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/max8925_battery.txt
@@ -0,0 +1,18 @@
+max8925-battery bindings
+~~~~~~~~~~~~~~~~
+
+Optional properties :
+ - batt-detect: whether support battery detect
+ - topoff-threshold: set charging current in topoff mode
+ - fast-charge: set charging current in fast mode
+ - no-temp-support: whether support temperature protection detect
+ - no-insert-detect: whether support insert detect
+
+Example:
+ charger {
+ batt-detect = <0>;
+ topoff-threshold = <1>;
+ fast-charge = <7>;
+ no-temp-support = <0>;
+ no-insert-detect = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,ds2760.yaml b/Documentation/devicetree/bindings/power/supply/maxim,ds2760.yaml
new file mode 100644
index 000000000..c838efcf7
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/maxim,ds2760.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,ds2760.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim DS2760 DT bindings
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+description: |
+ The ds2760 is a w1 slave device and must hence have its sub-node in
+ DT under a w1 bus master node.
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: maxim,ds2760
+
+ maxim,pmod-enabled:
+ description: |
+ Allow the DS2760 to enter sleep mode when the DQ line goes low for more than 2 seconds
+ and leave sleep Mode when the DQ line goes high.
+ type: boolean
+
+ maxim,cache-time-ms:
+ description: |
+ Time im milliseconds to cache the data for.
+ When this time expires, the values are read again from the hardware.
+ Defaults to 1000.
+
+ rated-capacity-microamp-hours:
+ description: |
+ The rated capacity of the battery, in mAh.
+ If not specified, the value stored in the non-volatile chip memory is used.
+
+required:
+ - compatible
+
+unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max14577.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max14577.yaml
new file mode 100644
index 000000000..4d3a1d090
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max14577.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max14577.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX14577/MAX77836 MicroUSB and Companion Power Management IC Charger
+
+maintainers:
+ - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+ This is a part of device tree bindings for Maxim MAX14577/MAX77836 MicroUSB
+ Integrated Circuit (MUIC).
+
+ See also Documentation/devicetree/bindings/mfd/maxim,max14577.yaml for
+ additional information and example.
+
+properties:
+ compatible:
+ enum:
+ - maxim,max14577-charger
+ - maxim,max77836-charger
+
+ maxim,constant-uvolt:
+ description:
+ Battery Constant Voltage in uV
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 4000000
+ maximum: 4350000
+
+ maxim,eoc-uamp:
+ description: |
+ Current in uA for End-Of-Charge mode.
+ MAX14577: 50000-20000
+ MAX77836: 5000-100000
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ maxim,fast-charge-uamp:
+ description: |
+ Current in uA for Fast Charge
+ MAX14577: 90000-950000
+ MAX77836: 45000-475000
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ maxim,ovp-uvolt:
+ description:
+ OverVoltage Protection Threshold in uV; In an overvoltage condition, INT
+ asserts and charging stops.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [6000000, 6500000, 7000000, 7500000]
+
+required:
+ - compatible
+ - maxim,constant-uvolt
+ - maxim,eoc-uamp
+ - maxim,fast-charge-uamp
+ - maxim,ovp-uvolt
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: maxim,max14577-charger
+ then:
+ properties:
+ maxim,eoc-uamp:
+ minimum: 50000
+ maximum: 200000
+ maxim,fast-charge-uamp:
+ minimum: 90000
+ maximum: 950000
+ else:
+ # max77836
+ properties:
+ maxim,eoc-uamp:
+ minimum: 5000
+ maximum: 100000
+ maxim,fast-charge-uamp:
+ minimum: 45000
+ maximum: 475000
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max14656.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max14656.yaml
new file mode 100644
index 000000000..070ef6f96
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max14656.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max14656.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX14656 DT bindings
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: maxim,max14656
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ charger-detector@35 {
+ compatible = "maxim,max14656";
+ reg = <0x35>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <26 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml
new file mode 100644
index 000000000..3a529326e
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max17040.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max17040.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim 17040 fuel gauge series
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ enum:
+ - maxim,max17040
+ - maxim,max17041
+ - maxim,max17043
+ - maxim,max17044
+ - maxim,max17048
+ - maxim,max17049
+ - maxim,max17058
+ - maxim,max17059
+ - maxim,max77836-battery
+
+ reg:
+ maxItems: 1
+
+ maxim,alert-low-soc-level:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+ maximum: 32
+ description: |
+ The alert threshold that sets the state of charge level (%) where an interrupt is generated.
+ If skipped the power up default value of 4 (%) will be used.
+
+ maxim,double-soc:
+ type: boolean
+ description: |
+ Certain devices return double the capacity.
+ Specify this to divide the reported value in 2 and thus normalize it.
+ SoC == State of Charge == Capacity.
+
+ maxim,rcomp:
+ $ref: /schemas/types.yaml#/definitions/uint8-array
+ minItems: 1
+ maxItems: 2
+ description: |
+ A value to compensate readings for various battery chemistries and operating temperatures.
+ max17040,41 have 2 byte rcomp, default to 0x97 0x00.
+ All other devices have one byte rcomp, default to 0x97.
+
+ interrupts:
+ maxItems: 1
+
+ wakeup-source:
+ type: boolean
+ description: |
+ Use this property to use alert low SoC level interrupt as wake up source.
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ battery@36 {
+ compatible = "maxim,max17048";
+ reg = <0x36>;
+ maxim,rcomp = /bits/ 8 <0x56>;
+ maxim,alert-low-soc-level = <10>;
+ maxim,double-soc;
+ };
+ };
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ battery@36 {
+ compatible = "maxim,max77836-battery";
+ reg = <0x36>;
+ maxim,alert-low-soc-level = <10>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+ wakeup-source;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml
new file mode 100644
index 000000000..aff5d0792
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max17042.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max17042.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim 17042 fuel gauge series
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ enum:
+ - maxim,max17042
+ - maxim,max17047
+ - maxim,max17050
+ - maxim,max17055
+ - maxim,max77849-battery
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+ description: |
+ The ALRT pin, an open-drain interrupt.
+
+ maxim,rsns-microohm:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Resistance of rsns resistor in micro Ohms (datasheet-recommended value is 10000).
+ Defining this property enables current-sense functionality.
+
+ maxim,cold-temp:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Temperature threshold to report battery as cold (in tenths of degree Celsius).
+ Default is not to report cold events.
+
+ maxim,over-heat-temp:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Temperature threshold to report battery as over heated (in tenths of degree Celsius).
+ Default is not to report over heating events.
+
+ maxim,dead-volt:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Voltage threshold to report battery as dead (in mV).
+ Default is not to report dead battery events.
+
+ maxim,over-volt:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Voltage threshold to report battery as over voltage (in mV).
+ Default is not to report over-voltage events.
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ battery@36 {
+ compatible = "maxim,max17042";
+ reg = <0x36>;
+ maxim,rsns-microohm = <10000>;
+ maxim,over-heat-temp = <600>;
+ maxim,over-volt = <4300>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml
new file mode 100644
index 000000000..f5fd53deb
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max77693.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX77693 MicroUSB and Companion Power Management IC Charger
+
+maintainers:
+ - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |
+ This is a part of device tree bindings for Maxim MAX77693 MicroUSB Integrated
+ Circuit (MUIC).
+
+ See also Documentation/devicetree/bindings/mfd/maxim,max77693.yaml for
+ additional information and example.
+
+properties:
+ compatible:
+ const: maxim,max77693-charger
+
+ maxim,constant-microvolt:
+ description: |
+ Battery constant voltage in uV. The charger will operate in fast
+ charge constant current mode till battery voltage reaches this level.
+ Then the charger will switch to fast charge constant voltage mode.
+ Also vsys (system voltage) will be set to this value when DC power is
+ supplied but charger is not enabled.
+ Valid values: 3650000 - 4400000, step by 25000 (rounded down)
+ minimum: 3650000
+ maximum: 4400000
+ default: 4200000
+
+ maxim,min-system-microvolt:
+ description: |
+ Minimal system voltage in uV.
+ enum: [3000000, 3100000, 3200000, 3300000, 3400000, 3500000,
+ 3600000, 3700000]
+ default: 3600000
+
+ maxim,thermal-regulation-celsius:
+ description: |
+ Temperature in Celsius for entering high temperature charging mode.
+ If die temperature exceeds this value the charging current will be
+ reduced by 105 mA/Celsius.
+ enum: [70, 85, 100, 115]
+ default: 100
+
+ maxim,battery-overcurrent-microamp:
+ description: |
+ Overcurrent protection threshold in uA (current from battery to
+ system).
+ Valid values: 2000000 - 3500000, step by 250000 (rounded down)
+ minimum: 2000000
+ maximum: 3500000
+ default: 3500000
+
+ maxim,charge-input-threshold-microvolt:
+ description: |
+ Threshold voltage in uV for triggering input voltage regulation loop.
+ If input voltage decreases below this value, the input current will
+ be reduced to reach the threshold voltage.
+ enum: [4300000, 4700000, 4800000, 4900000]
+ default: 4300000
+
+required:
+ - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max77976.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max77976.yaml
new file mode 100644
index 000000000..f23dcc507
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max77976.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max77976.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX77976 Battery charger
+
+maintainers:
+ - Luca Ceresoli <luca.ceresoli@bootlin.com>
+
+description: |
+ The Maxim MAX77976 is a 19Vin / 5.5A, 1-Cell Li+ battery charger
+ configured via I2C.
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: maxim,max77976
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ charger@6b {
+ compatible = "maxim,max77976";
+ reg = <0x6b>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/power/supply/maxim,max8903.yaml b/Documentation/devicetree/bindings/power/supply/maxim,max8903.yaml
new file mode 100644
index 000000000..a8d625f28
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/maxim,max8903.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max8903.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Semiconductor MAX8903 Battery Charger
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: maxim,max8903
+
+ dok-gpios:
+ maxItems: 1
+ description: Valid DC power has been detected (active low, input)
+
+ uok-gpios:
+ maxItems: 1
+ description: Valid USB power has been detected (active low, input)
+
+ cen-gpios:
+ maxItems: 1
+ description: Charge enable pin (active low, output)
+
+ chg-gpios:
+ maxItems: 1
+ description: Charger status pin (active low, input)
+
+ flt-gpios:
+ maxItems: 1
+ description: Fault pin (active low, output)
+
+ dcm-gpios:
+ maxItems: 1
+ description: Current limit mode setting (DC=1 or USB=0, output)
+
+ usus-gpios:
+ maxItems: 1
+ description: USB suspend pin (active high, output)
+
+required:
+ - compatible
+
+anyOf:
+ - required:
+ - dok-gpios
+ - required:
+ - uok-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ charger {
+ compatible = "maxim,max8903";
+ dok-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+ flt-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+ chg-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
+ cen-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml b/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml
new file mode 100644
index 000000000..fd491c598
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/mediatek,mt6370-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT6370 Battery Charger
+
+maintainers:
+ - ChiaEn Wu <chiaen_wu@richtek.com>
+
+description: |
+ This module is part of the MT6370 MFD device.
+ Provides Battery Charger, Boost for OTG devices and BC1.2 detection.
+
+properties:
+ compatible:
+ const: mediatek,mt6370-charger
+
+ interrupts:
+ description: |
+ Specify what irqs are needed to be handled by MT6370 Charger driver.
+ We need to use the IRQ "MT6370_IRQ_OVPCTRL_UVP_D" to know when USB
+ is plugged in, and then the driver will enable BC1.2 detection.
+ After the hardware of MT6370 completes the BC1.2 detection,
+ IRQ "MT6370_IRQ_ATTACH" will be triggered, and the driver will know
+ the result of BC1.2 detection.
+ When the IRQ "MT6370_IRQ_CHG_MIVR" is triggered, it means that the
+ hardware enters the "Minimum Input Voltage Regulation loop" and
+ a workaround needs to be applied at this time.
+ In summary, "MT6370_IRQ_OVPCTRL_UVP_D", "MT6370_IRQ_ATTACH" and
+ "MT6370_IRQ_CHG_MIVR" are required in this charger driver.
+ items:
+ - description: irq of "USB is plugged in"
+ - description: irq of "BC1.2 is done"
+ - description: irq of "Minimum Input Voltage Regulation loop is active"
+
+ interrupt-names:
+ items:
+ - const: uvp_d_evt
+ - const: attach_i
+ - const: mivr
+
+ io-channels:
+ description: |
+ Use ADC channel to read VBUS, IBUS, IBAT, etc., info.
+ minItems: 1
+ items:
+ - description: |
+ VBUS voltage with lower accuracy (+-75mV) but higher measure
+ range (1~22V)
+ - description: |
+ VBUS voltage with higher accuracy (+-30mV) but lower measure
+ range (1~9.76V)
+ - description: the main system input voltage
+ - description: battery voltage
+ - description: battery temperature-sense input voltage
+ - description: IBUS current (required)
+ - description: battery current
+ - description: |
+ regulated output voltage to supply for the PWM low-side gate driver
+ and the bootstrap capacitor
+ - description: IC junction temperature
+
+ io-channel-names:
+ minItems: 1
+ items:
+ - const: vbusdiv5
+ - const: vbusdiv2
+ - const: vsys
+ - const: vbat
+ - const: ts_bat
+ - const: ibus
+ - const: ibat
+ - const: chg_vddp
+ - const: temp_jc
+
+ usb-otg-vbus-regulator:
+ type: object
+ description: OTG boost regulator.
+ unevaluatedProperties: false
+ $ref: /schemas/regulator/regulator.yaml#
+
+ properties:
+ enable-gpios:
+ maxItems: 1
+
+required:
+ - compatible
+ - interrupts
+ - interrupt-names
+ - io-channels
+
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/power/supply/microchip,ucs1002.yaml b/Documentation/devicetree/bindings/power/supply/microchip,ucs1002.yaml
new file mode 100644
index 000000000..b9bd1591e
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/microchip,ucs1002.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/microchip,ucs1002.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip UCS1002 USB Port Power Controller
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+properties:
+ compatible:
+ const: microchip,ucs1002
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 2
+
+ interrupt-names:
+ oneOf:
+ - items:
+ - const: a_det
+ - const: alert
+ - const: a_det
+ - const: alert
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ charger@32 {
+ compatible = "microchip,ucs1002";
+ reg = <0x32>;
+ interrupts-extended = <&gpio5 2 IRQ_TYPE_EDGE_BOTH>,
+ <&gpio3 21 IRQ_TYPE_EDGE_BOTH>;
+ interrupt-names = "a_det", "alert";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml b/Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml
new file mode 100644
index 000000000..b89b15a5b
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/mt6360_charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Battery charger driver for MT6360 PMIC from MediaTek Integrated.
+
+maintainers:
+ - Gene Chen <gene_chen@richtek.com>
+
+description: |
+ This module is part of the MT6360 MFD device.
+ Provides Battery Charger, Boost for OTG devices and BC1.2 detection.
+
+properties:
+ compatible:
+ const: mediatek,mt6360-chg
+
+ richtek,vinovp-microvolt:
+ description: Maximum CHGIN regulation voltage in uV.
+ enum: [ 5500000, 6500000, 11000000, 14500000 ]
+
+
+ usb-otg-vbus-regulator:
+ type: object
+ description: OTG boost regulator.
+ $ref: /schemas/regulator/regulator.yaml#
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ mt6360_charger: charger {
+ compatible = "mediatek,mt6360-chg";
+ richtek,vinovp-microvolt = <14500000>;
+
+ otg_vbus_regulator: usb-otg-vbus-regulator {
+ regulator-compatible = "usb-otg-vbus";
+ regulator-name = "usb-otg-vbus";
+ regulator-min-microvolt = <4425000>;
+ regulator-max-microvolt = <5825000>;
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/power/supply/nokia,n900-battery.yaml b/Documentation/devicetree/bindings/power/supply/nokia,n900-battery.yaml
new file mode 100644
index 000000000..5178e6207
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/nokia,n900-battery.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/nokia,n900-battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nokia N900 battery
+
+maintainers:
+ - Pali Rohár <pali@kernel.org>
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: nokia,n900-battery
+
+ io-channels:
+ items:
+ - description: ADC channel for temperature reading
+ - description: ADC channel for battery size identification
+ - description: ADC channel to measure the battery voltage
+
+ io-channel-names:
+ items:
+ - const: temp
+ - const: bsi
+ - const: vbat
+
+required:
+ - compatible
+ - io-channels
+ - io-channel-names
+
+additionalProperties: false
+
+examples:
+ - |
+ battery {
+ compatible = "nokia,n900-battery";
+ io-channels = <&twl4030_madc 0>,
+ <&twl4030_madc 4>,
+ <&twl4030_madc 12>;
+ io-channel-names = "temp",
+ "bsi",
+ "vbat";
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/olpc-battery.yaml b/Documentation/devicetree/bindings/power/supply/olpc-battery.yaml
new file mode 100644
index 000000000..dd89e2532
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/olpc-battery.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/olpc-battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OLPC Battery
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: olpc,xo1.5-battery
+ - const: olpc,xo1-battery
+ - items:
+ - const: olpc,xo1-battery
+
+required:
+ - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/power/supply/power-supply.yaml b/Documentation/devicetree/bindings/power/supply/power-supply.yaml
new file mode 100644
index 000000000..2f672e6e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/power-supply.yaml
@@ -0,0 +1,21 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/power-supply.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Power Supply Core Support
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+properties:
+ power-supplies:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ maxItems: 1
+ description:
+ This property is added to a supply in order to list the devices which
+ supply it power, referenced by their phandles.
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/power/supply/qcom,pm8941-charger.yaml b/Documentation/devicetree/bindings/power/supply/qcom,pm8941-charger.yaml
new file mode 100644
index 000000000..cbac55d3c
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/qcom,pm8941-charger.yaml
@@ -0,0 +1,178 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/qcom,pm8941-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Switch-Mode Battery Charger and Boost
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+properties:
+ compatible:
+ enum:
+ - qcom,pm8226-charger
+ - qcom,pm8941-charger
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ items:
+ - description: charge done
+ - description: charge fast mode
+ - description: charge trickle mode
+ - description: battery temperature ok
+ - description: battery present
+ - description: charger disconnected
+ - description: USB-in valid
+ - description: DC-in valid
+
+ interrupt-names:
+ items:
+ - const: chg-done
+ - const: chg-fast
+ - const: chg-trkl
+ - const: bat-temp-ok
+ - const: bat-present
+ - const: chg-gone
+ - const: usb-valid
+ - const: dc-valid
+
+ qcom,fast-charge-current-limit:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 100000
+ maximum: 3000000
+ description: Maximum charge current in uA; May be clamped to safety limits; Defaults to 1A
+
+ qcom,fast-charge-low-threshold-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 2100000
+ maximum: 3600000
+ description: |
+ Battery voltage limit in uV above which fast charging may operate; Defaults to 3.2V
+ Below this value linear or switch-mode auto-trickle-charging will operate.
+
+ qcom,fast-charge-high-threshold-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 3240000
+ maximum: 5000000
+ description: |
+ Battery voltage limit in uV below which fast charging may operate; Defaults to 4.2V
+ The fast charger will attempt to charge the battery to this voltage.
+ May be clamped to safety limits.
+
+ qcom,fast-charge-safe-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 3240000
+ maximum: 5000000
+ description: |
+ Maximum safe battery voltage in uV; May be pre-set by bootloader, in which case,
+ setting this will harmlessly fail. The property 'fast-charge-high-watermark' will
+ be clamped by this value. Defaults to 4.2V.
+
+ qcom,fast-charge-safe-current:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 100000
+ maximum: 3000000
+ description: |
+ Maximum safe battery charge current in uA; May pre-set by bootloader, in which case,
+ setting this will harmlessly fail. The property 'qcom,fast-charge-current-limit'
+ will be clamped by this value. Defaults to 1A.
+
+ qcom,auto-recharge-threshold-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 3240000
+ maximum: 5000000
+ description: |
+ Battery voltage limit in uV below which auto-recharge functionality will restart charging
+ after end-of-charge; The high cutoff limit for auto-recharge is 5% above this value.
+ Defaults to 4.1V.
+
+ qcom,minimum-input-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 4200000
+ maximum: 9600000
+ description: |
+ Input voltage level in uV above which charging may operate. Defaults to 4.3V.
+
+ qcom,dc-current-limit:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 100000
+ maximum: 2500000
+ description: |
+ Default DC charge current limit in uA. Defaults to 100mA.
+
+ qcom,disable-dc:
+ type: boolean
+ description: Disable DC charger
+
+ qcom,jeita-extended-temp-range:
+ type: boolean
+ description: |
+ Enable JEITA extended temperature range; This does *not* adjust the maximum charge
+ voltage or current in the extended temperature range. It only allows charging when
+ the battery is in the extended temperature range. Voltage/current regulation must
+ be done externally to fully comply with the JEITA safety guidelines if this flag
+ is set.
+
+ usb-charge-current-limit:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 100000
+ maximum: 2500000
+ description: |
+ Default USB charge current limit in uA.
+
+ usb-otg-in-supply:
+ description: Reference to the regulator supplying power to the USB_OTG_IN pin.
+
+ otg-vbus:
+ $ref: /schemas/regulator/regulator.yaml#
+ description: |
+ This node defines a regulator used to control the direction of VBUS voltage.
+ Specifically whether to supply voltage to VBUS for host mode operation of the OTG port,
+ or allow input voltage from external VBUS for charging. In the hardware, the supply for
+ this regulator comes from usb_otg_in-supply.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ pmic {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ charger@1000 {
+ compatible = "qcom,pm8941-charger";
+ reg = <0x1000>;
+ interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
+ <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
+ interrupt-names = "chg-done",
+ "chg-fast",
+ "chg-trkl",
+ "bat-temp-ok",
+ "bat-present",
+ "chg-gone",
+ "usb-valid",
+ "dc-valid";
+ qcom,fast-charge-current-limit = <1000000>;
+ qcom,dc-current-limit = <1000000>;
+ usb-otg-in-supply = <&pm8941_5vs1>;
+
+ otg-vbus {};
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/qcom,pm8941-coincell.yaml b/Documentation/devicetree/bindings/power/supply/qcom,pm8941-coincell.yaml
new file mode 100644
index 000000000..0450f4dd4
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/qcom,pm8941-coincell.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/qcom,pm8941-coincell.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Coincell Charger
+
+description: |
+ The hardware block controls charging for a coincell or capacitor that is
+ used to provide power backup for certain features of the power management
+ IC (PMIC)
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+properties:
+ compatible:
+ const: qcom,pm8941-coincell
+
+ reg:
+ maxItems: 1
+
+ qcom,rset-ohms:
+ description: resistance (in ohms) for current-limiting resistor
+ enum: [ 800, 1200, 1700, 2100 ]
+
+ qcom,vset-millivolts:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: voltage (in millivolts) to apply for charging
+ enum: [ 2500, 3000, 3100, 3200 ]
+
+ qcom,charger-disable:
+ type: boolean
+ description: defining this property disables charging
+
+required:
+ - compatible
+ - reg
+ - qcom,rset-ohms
+ - qcom,vset-millivolts
+
+additionalProperties: false
+
+examples:
+ - |
+ pmic {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ charger@2800 {
+ compatible = "qcom,pm8941-coincell";
+ reg = <0x2800>;
+ qcom,rset-ohms = <2100>;
+ qcom,vset-millivolts = <3000>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml
new file mode 100644
index 000000000..756c16d17
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/richtek,rt5033-battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT5033 PMIC Fuel Gauge
+
+maintainers:
+ - Stephan Gerhold <stephan@gerhold.net>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: richtek,rt5033-battery
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ battery@35 {
+ compatible = "richtek,rt5033-battery";
+ reg = <0x35>;
+ };
+ };
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ battery@35 {
+ compatible = "richtek,rt5033-battery";
+ reg = <0x35>;
+ interrupt-parent = <&msmgpio>;
+ interrupts = <121 IRQ_TYPE_EDGE_FALLING>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml
new file mode 100644
index 000000000..bce151013
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/richtek,rt9455.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/richtek,rt9455.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for Richtek rt9455 battery charger
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: richtek,rt9455
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ richtek,output-charge-current:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: output current from the charger to the battery, in uA.
+
+ richtek,end-of-charge-percentage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ percent of the output charge current. When the current in constant-voltage phase drops
+ below output_charge_current x end-of-charge-percentage, charge is terminated.
+
+ richtek,battery-regulation-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: maximum battery voltage in uV.
+
+ richtek,boost-output-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ maximum voltage provided to consumer devices, when the charger is in boost mode, in uV.
+
+ richtek,min-input-voltage-regulation:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ input voltage level in uV, used to decrease voltage level when the over current of the
+ input power source occurs. This prevents input voltage drop due to insufficient
+ current provided by the power source. Defaults to 4500000 uV (4.5V).
+
+ richtek,avg-input-current-regulation:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ input current value in uA drained by the charger from the power source.
+ Defaults to 500000 uA (500mA).
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - richtek,output-charge-current
+ - richtek,end-of-charge-percentage
+ - richtek,battery-regulation-voltage
+ - richtek,boost-output-voltage
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ charger@22 {
+ compatible = "richtek,rt9455";
+ reg = <0x22>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+ richtek,output-charge-current = <500000>;
+ richtek,end-of-charge-percentage = <10>;
+ richtek,battery-regulation-voltage = <4200000>;
+ richtek,boost-output-voltage = <5050000>;
+
+ richtek,min-input-voltage-regulation = <4500000>;
+ richtek,avg-input-current-regulation = <500000>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml b/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml
new file mode 100644
index 000000000..24b06957b
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml
@@ -0,0 +1,163 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/rohm,bd99954.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD99954 Battery charger
+
+maintainers:
+ - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+ - Markus Laine <markus.laine@fi.rohmeurope.com>
+ - Mikko Mutanen <mikko.mutanen@fi.rohmeurope.com>
+
+description: |
+ The ROHM BD99954 is a Battery Management LSI for 1-4 cell Lithium-Ion
+ secondary battery intended to be used in space-constraint equipment such
+ as Low profile Notebook PC, Tablets and other applications. BD99954
+ provides a Dual-source Battery Charger, two port BC1.2 detection and a
+ Battery Monitor.
+
+
+properties:
+ compatible:
+ const: rohm,bd99954
+#
+# The battery charging profile of BD99954.
+#
+# Curve (1) represents charging current.
+# Curve (2) represents battery voltage.
+#
+# The BD99954 data sheet divides charging to three phases.
+# a) Trickle-charge with constant current (8).
+# b) pre-charge with constant current (6)
+# c) fast-charge with:
+# First a constant current (5) phase (CC)
+# Then constant voltage (CV) phase (after the battery voltage has reached
+# target level - until charging current has dropped to termination
+# level (7)
+#
+# V ^ ^ I
+# . .
+# . .
+# (4)- -.- - - - - - - - - - - - - - +++++++++++++++++++++++++++.
+# . / .
+# . ++++++/++ - - - - - - - - - - - - -.- - (5)
+# . + / + .
+# . + - -- .
+# . + - + .
+# . +.- -: .
+# . .+ +` .
+# . .- + | `/ .
+# . .." + .: .
+# . -" + -- .
+# . (2) ..." + | :- .
+# . ..."" + -: .
+# (3)- -.-.""- - - - -+++++++++ - - - - - - -.:- - - - - - - - - .- - (6)
+# . + `:. .
+# . + | -: .
+# . + -: .
+# . + .. .
+# . (1) + | "+++- - - -.- - (7)
+# -++++++++++++++- - - - - - - - - - - - - - - - - + - - - .- - (8)
+# . + -
+# -------------------------------------------------+++++++++-->
+# | | | CC | CV |
+# | --trickle-- | -pre- | ---------fast----------- |
+#
+# The charger uses the following battery properties
+# - trickle-charge-current-microamp:
+# Current used at trickle-charge phase (8 in above chart)
+# minimum: 64000
+# maximum: 1024000
+# multipleOf: 64000
+# - precharge-current-microamp:
+# Current used at pre-charge phase (6 in above chart)
+# minimum: 64000
+# maximum: 1024000
+# multipleOf: 64000
+# - constant-charge-current-max-microamp
+# Current used at fast charge constant current phase (5 in above chart)
+# minimum: 64000
+# maximum: 1024000
+# multipleOf: 64000
+# - constant-charge-voltage-max-microvolt
+# The constant voltage used in fast charging phase (4 in above chart)
+# minimum: 2560000
+# maximum: 19200000
+# multipleOf: 16000
+# - precharge-upper-limit-microvolt
+# charging mode is changed from trickle charging to pre-charging
+# when battery voltage exceeds this limit voltage (3 in above chart)
+# minimum: 2048000
+# maximum: 19200000
+# multipleOf: 64000
+# - re-charge-voltage-microvolt
+# minimum: 2560000
+# maximum: 19200000
+# multipleOf: 16000
+# re-charging is automatically started when battry has been discharging
+# to the point where the battery voltage drops below this limit
+# - over-voltage-threshold-microvolt
+# battery is expected to be faulty if battery voltage exceeds this limit.
+# Charger will then enter to a "battery faulty" -state
+# minimum: 2560000
+# maximum: 19200000
+# multipleOf: 16000
+# - charge-term-current-microamp
+# minimum: 0
+# maximum: 1024000
+# multipleOf: 64000
+# a charge cycle terminates when the battery voltage is above recharge
+# threshold, and the current is below this setting (7 in above chart)
+# See also Documentation/devicetree/bindings/power/supply/battery.yaml
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ monitored-battery:
+ description:
+ phandle of battery characteristics devicetree node
+
+ rohm,vsys-regulation-microvolt:
+ description: system specific lower limit for system voltage.
+ minimum: 2560000
+ maximum: 19200000
+ multipleOf: 64000
+
+ rohm,vbus-input-current-limit-microamp:
+ description: system specific VBUS input current limit (in microamps).
+ minimum: 32000
+ maximum: 16352000
+ multipleOf: 32000
+
+ rohm,vcc-input-current-limit-microamp:
+ description: system specific VCC/VACP input current limit (in microamps).
+ minimum: 32000
+ maximum: 16352000
+ multipleOf: 32000
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ charger@9 {
+ compatible = "rohm,bd99954";
+ monitored-battery = <&battery>;
+ reg = <0x9>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <29 8>;
+ rohm,vsys-regulation-microvolt = <8960000>;
+ rohm,vbus-input-current-limit-microamp = <1472000>;
+ rohm,vcc-input-current-limit-microamp = <1472000>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/samsung,battery.yaml b/Documentation/devicetree/bindings/power/supply/samsung,battery.yaml
new file mode 100644
index 000000000..40292d581
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/samsung,battery.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/samsung,battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SDI Batteries
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+ Samsung SDI (Samsung Digital Interface) batteries are all different versions
+ of lithium ion chemistry devices used for mobile phones, laptops and other
+ portable electronics. The batteries are adapted to a specific product and
+ the physical restrictions make it impossible to use another battery with the
+ product, so product device trees can specify these batteries. Operating
+ systems should determine hardware characteristics of the batteries from the
+ compatible string.
+
+properties:
+ compatible:
+ oneOf:
+ - const: samsung,eb-l1m7flu
+ description: 3.8V 1500 mAh battery used in Samsung GT-I8190
+ - const: samsung,eb425161la
+ description: 3.8V 1500 mAh battery used in Samsung SGH-T599 and SGH-I407
+ - const: samsung,eb425161lu
+ description: 3.8V 1500 mAh battery used in Samsung GT-I8160
+ - const: samsung,eb485159lu
+ description: 3.8V 1700 mAh battery used in Samsung GT-S7710
+ - const: samsung,eb535151vu
+ description: 3.8V 1500 mAh battery used in Samsung GT-I9070
+ - const: samsung,eb585157lu
+ description: 3.8V 2000 mAh battery used in Samsung GT-I8530
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ power {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ battery: battery {
+ compatible = "samsung,eb425161la";
+ };
+
+ charger@11 {
+ reg = <0x11>;
+ monitored-battery = <&battery>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/sbs,sbs-battery.yaml b/Documentation/devicetree/bindings/power/supply/sbs,sbs-battery.yaml
new file mode 100644
index 000000000..90b9d3d88
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/sbs,sbs-battery.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/sbs,sbs-battery.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SBS compliant battery
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+description: |
+ Battery compatible with the smart battery system specifications
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - ti,bq20z45
+ - ti,bq20z65
+ - ti,bq20z75
+ - enum:
+ - sbs,sbs-battery
+ - items:
+ - const: sbs,sbs-battery
+
+ reg:
+ maxItems: 1
+
+ sbs,i2c-retry-count:
+ description:
+ The number of times to retry I2C transactions on I2C IO failure.
+ default: 0
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ sbs,poll-retry-count:
+ description:
+ The number of times to try looking for new status after an external
+ change notification.
+ default: 0
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ sbs,battery-detect-gpios:
+ description:
+ GPIO which signals battery detection. If this is not supplied, the bus
+ needs to be polled to detect the battery.
+ maxItems: 1
+
+ sbs,disable-charger-broadcasts:
+ description:
+ SBS batteries by default send broadcast messages to SBS compliant chargers to
+ configure max. charge current/voltage. If your hardware does not have an SBS
+ compliant charger it should be disabled via this property to avoid blocking
+ the bus. Also some SBS battery fuel gauges are known to have a buggy multi-
+ master implementation.
+ type: boolean
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ battery@b {
+ compatible = "ti,bq20z75", "sbs,sbs-battery";
+ reg = <0xb>;
+ sbs,i2c-retry-count = <2>;
+ sbs,poll-retry-count = <10>;
+ sbs,battery-detect-gpios = <&gpio 122 GPIO_ACTIVE_HIGH>;
+ sbs,disable-charger-broadcasts;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/sbs,sbs-charger.yaml b/Documentation/devicetree/bindings/power/supply/sbs,sbs-charger.yaml
new file mode 100644
index 000000000..cb73ffa47
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/sbs,sbs-charger.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/sbs,sbs-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SBS compliant charger
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+description: |
+ Charger compatible with the smart battery system specifications
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - lltc,ltc4100
+ - enum:
+ - sbs,sbs-charger
+ - items:
+ - const: sbs,sbs-charger
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ charger@9 {
+ compatible = "lltc,ltc4100", "sbs,sbs-charger";
+ reg = <0x9>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml
new file mode 100644
index 000000000..99f506d6b
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/sbs,sbs-manager.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SBS compliant manger
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - lltc,ltc1760
+ - enum:
+ - sbs,sbs-manager
+ - items:
+ - const: sbs,sbs-manager
+
+ reg:
+ const: 0xa
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+patternProperties:
+ "^i2c@[1-4]$":
+ type: object
+ $ref: /schemas/i2c/i2c-controller.yaml#
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ batman: battery-manager@a {
+ compatible = "lltc,ltc1760", "sbs,sbs-manager";
+ reg = <0x0a>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ battery@b {
+ compatible = "ti,bq20z65", "sbs,sbs-battery";
+ reg = <0x0b>;
+ sbs,battery-detect-gpios = <&batman 1 1>;
+ };
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+
+ battery@b {
+ compatible = "ti,bq20z65", "sbs,sbs-battery";
+ reg = <0x0b>;
+ sbs,battery-detect-gpios = <&batman 2 1>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+
+ battery@b {
+ compatible = "ti,bq20z65", "sbs,sbs-battery";
+ reg = <0x0b>;
+ sbs,battery-detect-gpios = <&batman 3 1>;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml b/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml
new file mode 100644
index 000000000..eeb043f9b
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/sc2731-charger.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/sc2731-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum SC2731 PMICs battery charger binding
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: sprd,sc2731-charger
+
+ reg:
+ maxItems: 1
+
+ phys:
+ maxItems: 1
+ description: phandle to the USB phy
+
+ monitored-battery:
+ description: |
+ The charger uses the following battery properties
+ - charge-term-current-microamp: current for charge termination phase.
+ - constant-charge-voltage-max-microvolt: maximum constant input voltage.
+ See Documentation/devicetree/bindings/power/supply/battery.yaml
+
+additionalProperties: false
+
+examples:
+ - |
+ bat: battery {
+ compatible = "simple-battery";
+ charge-term-current-microamp = <120000>;
+ constant-charge-voltage-max-microvolt = <4350000>;
+ };
+
+ pmic {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ battery@a00 {
+ compatible = "sprd,sc2731-charger";
+ reg = <0x0>;
+ phys = <&ssphy>;
+ monitored-battery = <&bat>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/sc27xx-fg.yaml b/Documentation/devicetree/bindings/power/supply/sc27xx-fg.yaml
new file mode 100644
index 000000000..d90a838a1
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/sc27xx-fg.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/sc27xx-fg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Spreadtrum SC27XX PMICs Fuel Gauge Unit Power Supply Bindings
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ enum:
+ - sprd,sc2720-fgu
+ - sprd,sc2721-fgu
+ - sprd,sc2723-fgu
+ - sprd,sc2730-fgu
+ - sprd,sc2731-fgu
+
+ reg:
+ maxItems: 1
+
+ battery-detect-gpios:
+ maxItems: 1
+
+ io-channels:
+ items:
+ - description: Battery Temperature ADC
+ - description: Battery Charge Voltage ADC
+
+ io-channel-names:
+ items:
+ - const: bat-temp
+ - const: charge-vol
+
+ nvmem-cells:
+ maxItems: 1
+ description: Calibration cells provided by eFuse device
+
+ nvmem-cell-names:
+ const: fgu_calib
+
+ sprd,calib-resistance-micro-ohms:
+ description: real resistance of coulomb counter chip in micro Ohms
+
+ monitored-battery: true
+
+required:
+ - compatible
+ - reg
+ - battery-detect-gpios
+ - io-channels
+ - io-channel-names
+ - nvmem-cells
+ - nvmem-cell-names
+ - sprd,calib-resistance-micro-ohms
+ - monitored-battery
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ bat: battery {
+ compatible = "simple-battery";
+ charge-full-design-microamp-hours = <1900000>;
+ constant-charge-voltage-max-microvolt = <4350000>;
+ ocv-capacity-celsius = <20>;
+ ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>,
+ <4022000 85>, <3983000 80>, <3949000 75>,
+ <3917000 70>, <3889000 65>, <3864000 60>,
+ <3835000 55>, <3805000 50>, <3787000 45>,
+ <3777000 40>, <3773000 35>, <3770000 30>,
+ <3765000 25>, <3752000 20>, <3724000 15>,
+ <3680000 10>, <3605000 5>, <3400000 0>;
+ // ...
+ };
+
+ pmic {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ battery@a00 {
+ compatible = "sprd,sc2731-fgu";
+ reg = <0xa00>;
+ battery-detect-gpios = <&pmic_eic 9 GPIO_ACTIVE_HIGH>;
+ io-channels = <&pmic_adc 5>, <&pmic_adc 14>;
+ io-channel-names = "bat-temp", "charge-vol";
+ nvmem-cells = <&fgu_calib>;
+ nvmem-cell-names = "fgu_calib";
+ monitored-battery = <&bat>;
+ sprd,calib-resistance-micro-ohms = <21500>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-battery.txt b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-battery.txt
new file mode 100644
index 000000000..ee125cb0e
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-battery.txt
@@ -0,0 +1,34 @@
+AB85000 PMIC contains a node, which contains shared
+information about the battery connected to the PMIC.
+The node has no compatible property.
+
+Properties of this node are:
+
+thermistor-on-batctrl:
+ A boolean value indicating thermistor interface to battery
+
+ Note:
+ 'btemp' and 'batctrl' are the pins interfaced for battery temperature
+ measurement, 'btemp' signal is used when NTC(negative temperature
+ coefficient) resister is interfaced external to battery whereas
+ 'batctrl' pin is used when NTC resister is internal to battery.
+
+ Example:
+ ab8500_battery: ab8500_battery {
+ thermistor-on-batctrl;
+ };
+ indicates: NTC resister is internal to battery, 'batctrl' is used
+ for thermal measurement.
+
+ The absence of property 'thermal-on-batctrl' indicates
+ NTC resister is external to battery and 'btemp' signal is used
+ for thermal measurement.
+
+battery-type:
+ This shall be the battery manufacturing technology type,
+ allowed types are:
+ "UNKNOWN" "NiMH" "LION" "LIPO" "LiFe" "NiCd" "LiMn"
+ Example:
+ ab8500_battery: ab8500_battery {
+ stericsson,battery-type = "LIPO";
+ }
diff --git a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-btemp.yaml b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-btemp.yaml
new file mode 100644
index 000000000..525abdfb3
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-btemp.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/stericsson,ab8500-btemp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AB8500 Battery Temperature Monitor
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: stericsson,ab8500-btemp
+
+ monitored-battery:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to battery node
+
+ battery:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ deprecated: true
+
+ interrupts:
+ maxItems: 5
+
+ interrupt-names:
+ items:
+ - const: BAT_CTRL_INDB
+ - const: BTEMP_LOW
+ - const: BTEMP_HIGH
+ - const: BTEMP_LOW_MEDIUM
+ - const: BTEMP_MEDIUM_HIGH
+
+ io-channels:
+ maxItems: 2
+
+ io-channel-names:
+ items:
+ - const: btemp_ball
+ - const: bat_ctrl
+
+required:
+ - compatible
+ - monitored-battery
+ - interrupts
+ - interrupt-names
+ - io-channels
+ - io-channel-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ pmic {
+ battery-temperature {
+ compatible = "stericsson,ab8500-btemp";
+ monitored-battery = <&battery>;
+ interrupts = <20 IRQ_TYPE_LEVEL_HIGH>,
+ <80 IRQ_TYPE_LEVEL_HIGH>,
+ <83 IRQ_TYPE_LEVEL_HIGH>,
+ <81 IRQ_TYPE_LEVEL_HIGH>,
+ <82 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "BAT_CTRL_INDB",
+ "BTEMP_LOW",
+ "BTEMP_HIGH",
+ "BTEMP_LOW_MEDIUM",
+ "BTEMP_MEDIUM_HIGH";
+ io-channels = <&gpadc 0x02>, <&gpadc 0x01>;
+ io-channel-names = "btemp_ball", "bat_ctrl";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-chargalg.yaml b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-chargalg.yaml
new file mode 100644
index 000000000..10bbdcfc8
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-chargalg.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/stericsson,ab8500-chargalg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AB8500 Charging Algorithm
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: stericsson,ab8500-chargalg
+
+ monitored-battery:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to battery node
+
+ battery:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ deprecated: true
+
+required:
+ - compatible
+ - monitored-battery
+
+additionalProperties: false
+
+examples:
+ - |
+ pmic {
+ charging-algorithm {
+ compatible = "stericsson,ab8500-chargalg";
+ monitored-battery = <&ab8500_battery>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-charger.yaml b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-charger.yaml
new file mode 100644
index 000000000..e33329b3a
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-charger.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/stericsson,ab8500-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AB8500 Charger
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: stericsson,ab8500-charger
+
+ monitored-battery:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to battery node
+
+ battery:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ deprecated: true
+
+ vddadc-supply:
+ description: Supply for USB and Main charger
+
+ autopower_cfg:
+ type: boolean
+ description: automatic poweron after powerloss
+
+ interrupts:
+ maxItems: 14
+
+ interrupt-names:
+ items:
+ - const: MAIN_CH_UNPLUG_DET
+ - const: MAIN_CHARGE_PLUG_DET
+ - const: MAIN_EXT_CH_NOT_OK
+ - const: MAIN_CH_TH_PROT_R
+ - const: MAIN_CH_TH_PROT_F
+ - const: VBUS_DET_F
+ - const: VBUS_DET_R
+ - const: USB_LINK_STATUS
+ - const: USB_CH_TH_PROT_R
+ - const: USB_CH_TH_PROT_F
+ - const: USB_CHARGER_NOT_OKR
+ - const: VBUS_OVV
+ - const: CH_WD_EXP
+ - const: VBUS_CH_DROP_END
+
+ io-channels:
+ minItems: 2
+ maxItems: 4
+
+ io-channel-names:
+ oneOf:
+ - items:
+ - const: main_charger_v
+ - const: main_charger_c
+ - const: vbus_v
+ - const: usb_charger_c
+ - items:
+ - const: vbus_v
+ - const: usb_charger_c
+
+
+required:
+ - compatible
+ - monitored-battery
+ - vddadc-supply
+ - interrupts
+ - interrupt-names
+ - io-channels
+ - io-channel-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ pmic {
+ charger {
+ compatible = "stericsson,ab8500-charger";
+ monitored-battery = <&battery>;
+ vddadc-supply = <&ab8500_ldo_tvout_reg>;
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>,
+ <11 IRQ_TYPE_LEVEL_HIGH>,
+ <0 IRQ_TYPE_LEVEL_HIGH>,
+ <107 IRQ_TYPE_LEVEL_HIGH>,
+ <106 IRQ_TYPE_LEVEL_HIGH>,
+ <14 IRQ_TYPE_LEVEL_HIGH>,
+ <15 IRQ_TYPE_LEVEL_HIGH>,
+ <79 IRQ_TYPE_LEVEL_HIGH>,
+ <105 IRQ_TYPE_LEVEL_HIGH>,
+ <104 IRQ_TYPE_LEVEL_HIGH>,
+ <89 IRQ_TYPE_LEVEL_HIGH>,
+ <22 IRQ_TYPE_LEVEL_HIGH>,
+ <21 IRQ_TYPE_LEVEL_HIGH>,
+ <16 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "MAIN_CH_UNPLUG_DET",
+ "MAIN_CHARGE_PLUG_DET",
+ "MAIN_EXT_CH_NOT_OK",
+ "MAIN_CH_TH_PROT_R",
+ "MAIN_CH_TH_PROT_F",
+ "VBUS_DET_F",
+ "VBUS_DET_R",
+ "USB_LINK_STATUS",
+ "USB_CH_TH_PROT_R",
+ "USB_CH_TH_PROT_F",
+ "USB_CHARGER_NOT_OKR",
+ "VBUS_OVV",
+ "CH_WD_EXP",
+ "VBUS_CH_DROP_END";
+ io-channels = <&gpadc 0x03>,
+ <&gpadc 0x0a>,
+ <&gpadc 0x09>,
+ <&gpadc 0x0b>;
+ io-channel-names = "main_charger_v",
+ "main_charger_c",
+ "vbus_v",
+ "usb_charger_c";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-fg.yaml b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-fg.yaml
new file mode 100644
index 000000000..6a724ca90
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-fg.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/stericsson,ab8500-fg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AB8500 Fuel Gauge
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: stericsson,ab8500-fg
+
+ monitored-battery:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: phandle to battery node
+
+ battery:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ deprecated: true
+
+ line-impedance-micro-ohms:
+ description: The line impedance between the battery and the
+ AB8500 inputs, to compensate for this when determining internal
+ resistance.
+
+ interrupts:
+ maxItems: 5
+
+ interrupt-names:
+ items:
+ - const: NCONV_ACCU
+ - const: BATT_OVV
+ - const: LOW_BAT_F
+ - const: CC_INT_CALIB
+ - const: CCEOC
+
+ io-channels:
+ maxItems: 1
+
+ io-channel-names:
+ items:
+ - const: main_bat_v
+
+required:
+ - compatible
+ - monitored-battery
+ - interrupts
+ - interrupt-names
+ - io-channels
+ - io-channel-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ pmic {
+ fuel-gauge {
+ compatible = "stericsson,ab8500-fg";
+ monitored-battery = <&battery>;
+ interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
+ <8 IRQ_TYPE_LEVEL_HIGH>,
+ <28 IRQ_TYPE_LEVEL_HIGH>,
+ <27 IRQ_TYPE_LEVEL_HIGH>,
+ <26 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "NCONV_ACCU",
+ "BATT_OVV",
+ "LOW_BAT_F",
+ "CC_INT_CALIB",
+ "CCEOC";
+ io-channels = <&gpadc 0x08>;
+ io-channel-names = "main_bat_v";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml b/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml
new file mode 100644
index 000000000..2d552becb
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/summit,smb347-charger.yaml
@@ -0,0 +1,182 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/summit,smb347-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Battery charger driver for SMB345, SMB347 and SMB358
+
+maintainers:
+ - David Heidelberg <david@ixit.cz>
+ - Dmitry Osipenko <digetx@gmail.com>
+
+properties:
+ compatible:
+ enum:
+ - summit,smb345
+ - summit,smb347
+ - summit,smb358
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ monitored-battery:
+ description: phandle to the battery node
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ summit,enable-usb-charging:
+ type: boolean
+ description: Enable charging through USB.
+
+ summit,enable-otg-charging:
+ type: boolean
+ description: Provide power for USB OTG
+
+ summit,enable-mains-charging:
+ type: boolean
+ description: Enable charging through mains
+
+ summit,enable-charge-control:
+ description: Enable charging control
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum:
+ - 0 # SMB3XX_CHG_ENABLE_SW SW (I2C interface)
+ - 1 # SMB3XX_CHG_ENABLE_PIN_ACTIVE_LOW Pin control (Active Low)
+ - 2 # SMB3XX_CHG_ENABLE_PIN_ACTIVE_HIGH Pin control (Active High)
+
+ summit,fast-voltage-threshold-microvolt:
+ description: Voltage threshold to transit to fast charge mode (in uV)
+ minimum: 2400000
+ maximum: 3000000
+
+ summit,mains-current-limit-microamp:
+ description: Maximum input current from AC/DC input (in uA)
+
+ summit,usb-current-limit-microamp:
+ description: Maximum input current from USB input (in uA)
+
+ summit,charge-current-compensation-microamp:
+ description: Charge current compensation (in uA)
+
+ summit,chip-temperature-threshold-celsius:
+ description: Chip temperature for thermal regulation in °C.
+ enum: [100, 110, 120, 130]
+
+ summit,soft-compensation-method:
+ description: Soft temperature limit compensation method
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum:
+ - 0 # SMB3XX_SOFT_TEMP_COMPENSATE_NONE Compensation none
+ - 1 # SMB3XX_SOFT_TEMP_COMPENSATE_CURRENT Current compensation
+ - 2 # SMB3XX_SOFT_TEMP_COMPENSATE_VOLTAGE Voltage compensation
+
+ summit,inok-polarity:
+ description: |
+ Polarity of INOK signal indicating presence of external power supply.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum:
+ - 0 # SMB3XX_SYSOK_INOK_ACTIVE_LOW
+ - 1 # SMB3XX_SYSOK_INOK_ACTIVE_HIGH
+
+ usb-vbus:
+ $ref: /schemas/regulator/regulator.yaml#
+ type: object
+
+ properties:
+ summit,needs-inok-toggle:
+ type: boolean
+ description: INOK signal is fixed and polarity needs to be toggled
+ in order to enable/disable output mode.
+
+ unevaluatedProperties: false
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ enum:
+ - summit,smb345
+ - summit,smb358
+
+ then:
+ properties:
+ summit,mains-current-limit-microamp:
+ enum: [ 300000, 500000, 700000, 1000000,
+ 1500000, 1800000, 2000000]
+
+ summit,usb-current-limit-microamp:
+ enum: [ 300000, 500000, 700000, 1000000,
+ 1500000, 1800000, 2000000]
+
+ summit,charge-current-compensation-microamp:
+ enum: [200000, 450000, 600000, 900000]
+
+ else:
+ properties:
+ summit,mains-current-limit-microamp:
+ enum: [ 300000, 500000, 700000, 900000, 1200000,
+ 1500000, 1800000, 2000000, 2200000, 2500000]
+
+ summit,usb-current-limit-microamp:
+ enum: [ 300000, 500000, 700000, 900000, 1200000,
+ 1500000, 1800000, 2000000, 2200000, 2500000]
+
+ summit,charge-current-compensation-microamp:
+ enum: [250000, 700000, 900000, 1200000]
+
+required:
+ - compatible
+ - reg
+
+anyOf:
+ - required:
+ - summit,enable-usb-charging
+ - required:
+ - summit,enable-otg-charging
+ - required:
+ - summit,enable-mains-charging
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/power/summit,smb347-charger.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ charger@7f {
+ compatible = "summit,smb347";
+ reg = <0x7f>;
+
+ summit,enable-charge-control = <SMB3XX_CHG_ENABLE_PIN_ACTIVE_HIGH>;
+ summit,inok-polarity = <SMB3XX_SYSOK_INOK_ACTIVE_LOW>;
+ summit,chip-temperature-threshold-celsius = <110>;
+ summit,mains-current-limit-microamp = <2000000>;
+ summit,usb-current-limit-microamp = <500000>;
+ summit,enable-usb-charging;
+ summit,enable-mains-charging;
+
+ monitored-battery = <&battery>;
+
+ usb-vbus {
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-min-microamp = <750000>;
+ regulator-max-microamp = <750000>;
+ summit,needs-inok-toggle;
+ };
+ };
+ };
+
+ battery: battery-cell {
+ compatible = "simple-battery";
+ constant-charge-current-max-microamp = <1800000>;
+ operating-range-celsius = <0 45>;
+ alert-celsius = <3 42>;
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml b/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml
new file mode 100644
index 000000000..93654e732
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/ti,lp8727.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/ti,lp8727.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for TI/National Semiconductor LP8727 Charger
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: ti,lp8727
+
+ reg:
+ const: 0x27
+
+ interrupts:
+ maxItems: 1
+
+ debounce-ms:
+ description: interrupt debounce time in ms
+
+patternProperties:
+ '^(ac|usb)$':
+ type: object
+ description: USB/AC charging parameters
+ properties:
+ charger-type:
+ enum:
+ - ac
+ - usb
+
+ eoc-level:
+ $ref: /schemas/types.yaml#/definitions/uint8
+ minimum: 0
+ maximum: 6
+ description: |
+ End of Charge Percentage with the following mapping:
+ 0 = 5%, 1 = 10%, 2 = 16%, 3 = 20%, 4 = 25%, 5 = 33%, 6 = 50%
+
+ charging-current:
+ $ref: /schemas/types.yaml#/definitions/uint8
+ minimum: 0
+ maximum: 9
+ description: |
+ Charging current with the following mapping:
+ 0 = 90mA, 1 = 100mA, 2 = 400mA, 3 = 450mA, 4 = 500mA, 5 = 600mA,
+ 6 = 700mA, 7 = 800mA, 8 = 900mA, 9 = 1000mA
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ lp8727: charger@27 {
+ compatible = "ti,lp8727";
+ reg = <0x27>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+ debounce-ms = <300>;
+
+ /* AC charger: 5% EOC and 500mA charging current */
+ ac {
+ charger-type = "ac";
+ eoc-level = /bits/ 8 <0>;
+ charging-current = /bits/ 8 <4>;
+ };
+
+ /* USB charger: 10% EOC and 400mA charging current */
+ usb {
+ charger-type = "usb";
+ eoc-level = /bits/ 8 <1>;
+ charging-current = /bits/ 8 <2>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/tps65090-charger.yaml b/Documentation/devicetree/bindings/power/supply/tps65090-charger.yaml
new file mode 100644
index 000000000..586745426
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/tps65090-charger.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/tps65090-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TPS65090 Frontend PMU with Switchmode Charger
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: ti,tps65090-charger
+
+ ti,enable-low-current-chrg:
+ type: boolean
+ description: |
+ Enables charging when a low current is detected while the default logic is to stop charging.
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ pmic {
+ charger {
+ compatible = "ti,tps65090-charger";
+ ti,enable-low-current-chrg;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/tps65217-charger.yaml b/Documentation/devicetree/bindings/power/supply/tps65217-charger.yaml
new file mode 100644
index 000000000..7ccf0cdff
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/tps65217-charger.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/tps65217-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TPS65217 Charger
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: ti,tps65217-charger
+
+ interrupts:
+ minItems: 2
+ maxItems: 2
+
+ interrupt-names:
+ items:
+ - const: USB
+ - const: AC
+
+required:
+ - compatible
+ - interrupts
+ - interrupt-names
+
+additionalProperties: false
+
+examples:
+ - |
+ pmic {
+ charger {
+ compatible = "ti,tps65217-charger";
+ interrupts = <0>, <1>;
+ interrupt-names = "USB", "AC";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/twl4030-charger.yaml b/Documentation/devicetree/bindings/power/supply/twl4030-charger.yaml
new file mode 100644
index 000000000..d8d3154f9
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/twl4030-charger.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/twl4030-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TWL4030 BCI (Battery Charger Interface)
+
+description: |
+ The battery charger needs to interact with the USB phy in order to know when
+ charging is permissible, and when there is a connection or disconnection.
+
+ The choice of phy cannot be configured at a hardware level, so there is no
+ value in explicit configuration in device-tree. Rather if there is a sibling
+ of the BCI node which is compatible with "ti,twl4030-usb", then that is used
+ to determine when and how use USB power for charging.
+
+maintainers:
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: ti,twl4030-bci
+
+ interrupts:
+ minItems: 2
+ maxItems: 2
+
+ ti,bb-uvolt:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: microvolts for charging the backup battery
+
+ ti,bb-uamp:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: microamps for charging the backup battery
+
+ io-channels:
+ items:
+ - description: Accessory Charger Voltage Channel
+
+ io-channel-names:
+ items:
+ - const: vac
+
+ bci3v1-supply:
+ description: 3.1V USB regulator
+
+required:
+ - compatible
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ pmic {
+ charger {
+ compatible = "ti,twl4030-bci";
+ interrupts = <9>, <2>;
+ ti,bb-uvolt = <3200000>;
+ ti,bb-uamp = <150>;
+ io-channels = <&twl_madc 11>;
+ io-channel-names = "vac";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-ac-power-supply.yaml b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-ac-power-supply.yaml
new file mode 100644
index 000000000..5c8369fd3
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-ac-power-supply.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/x-powers,axp20x-ac-power-supply.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AXP20x AC power-supply
+
+description: |
+ The AXP20X can read the current current and voltage supplied by AC by
+ reading ADC channels from the AXP20X ADC. The AXP22X is only able to
+ tell if an AC power supply is present and usable. AXP813/AXP803 are
+ able to limit current and supply voltage
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - const: x-powers,axp202-ac-power-supply
+ - const: x-powers,axp221-ac-power-supply
+ - items:
+ - const: x-powers,axp803-ac-power-supply
+ - const: x-powers,axp813-ac-power-supply
+ - const: x-powers,axp813-ac-power-supply
+
+required:
+ - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-battery-power-supply.yaml b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-battery-power-supply.yaml
new file mode 100644
index 000000000..e0b95ecbb
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-battery-power-supply.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/x-powers,axp20x-battery-power-supply.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AXP20x Battery power-supply
+
+description: |
+ The supported devices can read the battery voltage, charge and discharge
+ currents of the battery by reading ADC channels from the ADC.
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - const: x-powers,axp202-battery-power-supply
+ - const: x-powers,axp209-battery-power-supply
+ - const: x-powers,axp221-battery-power-supply
+ - items:
+ - const: x-powers,axp803-battery-power-supply
+ - const: x-powers,axp813-battery-power-supply
+ - const: x-powers,axp813-battery-power-supply
+
+required:
+ - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml
new file mode 100644
index 000000000..3ce648dd9
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/x-powers,axp20x-usb-power-supply.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/x-powers,axp20x-usb-power-supply.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AXP20x USB power-supply
+
+description: |
+ The AXP223 PMIC shares most of its behaviour with the AXP221 but has slight
+ variations such as the former being able to set the VBUS power supply max
+ current to 100mA, unlike the latter.
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Sebastian Reichel <sre@kernel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - x-powers,axp202-usb-power-supply
+ - x-powers,axp221-usb-power-supply
+ - x-powers,axp223-usb-power-supply
+ - x-powers,axp813-usb-power-supply
+ - items:
+ - const: x-powers,axp803-usb-power-supply
+ - const: x-powers,axp813-usb-power-supply
+
+
+required:
+ - compatible
+
+additionalProperties: false