Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 177 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt
new file mode 100644
index 000000000..ac423f4c3
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt
@@ -0,0 +1,177 @@
+Qualcomm WCNSS Peripheral Image Loader
+
+This document defines the binding for a component that loads and boots firmware
+on the Qualcomm WCNSS core.
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be one of:
+		    "qcom,riva-pil",
+		    "qcom,pronto-v1-pil",
+		    "qcom,pronto-v2-pil"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: must specify the base address and size of the CCU, DXE and
+		    PMU register blocks
+
+- reg-names:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be "ccu", "dxe", "pmu"
+
+- interrupts-extended:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: must list the watchdog and fatal IRQs and may specify the
+		    ready, handover and stop-ack IRQs
+
+- interrupt-names:
+	Usage: required
+	Value type: <stringlist>
+	Definition: should be "wdog", "fatal", optionally followed by "ready",
+		    "handover", "stop-ack"
+
+- firmware-name:
+	Usage: optional
+	Value type: <string>
+	Definition: must list the relative firmware image path for the
+		    WCNSS core. Defaults to "wcnss.mdt".
+
+- vddmx-supply: (deprecated for qcom,pronto-v1/2-pil)
+- vddcx-supply: (deprecated for qcom,pronto-v1/2-pil)
+- vddpx-supply:
+	Usage: required
+	Value type: <phandle>
+	Definition: reference to the regulators to be held on behalf of the
+		    booting of the WCNSS core
+
+- power-domains:
+	Usage: required (for qcom,pronto-v1/2-pil)
+	Value type: <phandle>
+	Definition: reference to the power domains to be held on behalf of the
+		    booting of the WCNSS core
+
+- power-domain-names:
+	Usage: required (for qcom,pronto-v1/2-pil)
+	Value type: <stringlist>
+	Definition: must be "cx", "mx"
+
+- qcom,smem-states:
+	Usage: optional
+	Value type: <prop-encoded-array>
+	Definition: reference to the SMEM state used to indicate to WCNSS that
+		    it should shut down
+
+- qcom,smem-state-names:
+	Usage: optional
+	Value type: <stringlist>
+	Definition: should be "stop"
+
+- memory-region:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: reference to reserved-memory node for the remote processor
+		    see ../reserved-memory/reserved-memory.txt
+
+= SUBNODES
+A required subnode of the WCNSS PIL is used to describe the attached rf module
+and its resource dependencies. It is described by the following properties:
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be one of:
+		    "qcom,wcn3620",
+		    "qcom,wcn3660",
+		    "qcom,wcn3660b",
+		    "qcom,wcn3680"
+
+- clocks:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: should specify the xo clock and optionally the rf clock
+
+- clock-names:
+	Usage: required
+	Value type: <stringlist>
+	Definition: should be "xo", optionally followed by "rf"
+
+- vddxo-supply:
+- vddrfa-supply:
+- vddpa-supply:
+- vdddig-supply:
+	Usage: required
+	Value type: <phandle>
+	Definition: reference to the regulators to be held on behalf of the
+		    booting of the WCNSS core
+
+
+The wcnss node can also have an subnode named "smd-edge" that describes the SMD
+edge, channels and devices related to the WCNSS.
+See ../soc/qcom/qcom,smd.yaml for details on how to describe the SMD edge.
+
+= EXAMPLE
+The following example describes the resources needed to boot control the WCNSS,
+with attached WCN3680, as it is commonly found on MSM8974 boards.
+
+pronto@fb204000 {
+	compatible = "qcom,pronto-v2-pil";
+	reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>;
+	reg-names = "ccu", "dxe", "pmu";
+
+	interrupts-extended = <&intc 0 149 1>,
+			      <&wcnss_smp2p_slave 0 0>,
+			      <&wcnss_smp2p_slave 1 0>,
+			      <&wcnss_smp2p_slave 2 0>,
+			      <&wcnss_smp2p_slave 3 0>;
+	interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+	power-domains = <&rpmpd MSM8974_VDDCX>, <&rpmpd MSM8974_VDDMX>;
+	power-domain-names = "cx", "mx";
+
+	vddpx-supply = <&pm8941_s3>;
+
+	qcom,smem-states = <&wcnss_smp2p_out 0>;
+	qcom,smem-state-names = "stop";
+
+	memory-region = <&wcnss_region>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&wcnss_pin_a>;
+
+	iris {
+		compatible = "qcom,wcn3680";
+
+		clocks = <&rpmcc RPM_CXO_CLK_SRC>, <&rpmcc RPM_CXO_A2>;
+		clock-names = "xo", "rf";
+
+		vddxo-supply = <&pm8941_l6>;
+		vddrfa-supply = <&pm8941_l11>;
+		vddpa-supply = <&pm8941_l19>;
+		vdddig-supply = <&pm8941_s3>;
+	};
+
+	smd-edge {
+		interrupts = <0 142 1>;
+
+		qcom,ipc = <&apcs 8 17>;
+		qcom,smd-edge = <6>;
+		qcom,remote-pid = <4>;
+
+		label = "pronto";
+
+		wcnss {
+			compatible = "qcom,wcnss";
+			qcom,smd-channels = "WCNSS_CTRL";
+
+			qcom,mmio = <&pronto>;
+
+			bt {
+				compatible = "qcom,wcnss-bt";
+			};
+		};
+	};
+};