diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
commit | 2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch) | |
tree | 848558de17fb3008cdf4d861b01ac7781903ce39 /Documentation/devicetree/bindings/security | |
parent | Initial commit. (diff) | |
download | linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip |
Adding upstream version 6.1.76.upstream/6.1.76upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'Documentation/devicetree/bindings/security')
7 files changed, 200 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/security/tpm/google,cr50.txt b/Documentation/devicetree/bindings/security/tpm/google,cr50.txt new file mode 100644 index 000000000..cd69c2efd --- /dev/null +++ b/Documentation/devicetree/bindings/security/tpm/google,cr50.txt @@ -0,0 +1,19 @@ +* H1 Secure Microcontroller with Cr50 Firmware on SPI Bus. + +H1 Secure Microcontroller running Cr50 firmware provides several +functions, including TPM-like functionality. It communicates over +SPI using the FIFO protocol described in the PTP Spec, section 6. + +Required properties: +- compatible: Should be "google,cr50". +- spi-max-frequency: Maximum SPI frequency. + +Example: + +&spi0 { + tpm@0 { + compatible = "google,cr50"; + reg = <0>; + spi-max-frequency = <800000>; + }; +}; diff --git a/Documentation/devicetree/bindings/security/tpm/ibmvtpm.txt b/Documentation/devicetree/bindings/security/tpm/ibmvtpm.txt new file mode 100644 index 000000000..d89f99971 --- /dev/null +++ b/Documentation/devicetree/bindings/security/tpm/ibmvtpm.txt @@ -0,0 +1,41 @@ +* Device Tree Bindings for IBM Virtual Trusted Platform Module(vtpm) + +Required properties: + +- compatible : property name that conveys the platform architecture + identifiers, as 'IBM,vtpm' +- device_type : specifies type of virtual device +- interrupts : property specifying the interrupt source number and + sense code associated with this virtual I/O Adapters +- ibm,my-drc-index : integer index for the connector between the device + and its parent - present only if Dynamic + Reconfiguration(DR) Connector is enabled +- ibm,#dma-address-cells: specifies the number of cells that are used to + encode the physical address field of dma-window + properties +- ibm,#dma-size-cells : specifies the number of cells that are used to + encode the size field of dma-window properties +- ibm,my-dma-window : specifies DMA window associated with this virtual + IOA +- ibm,loc-code : specifies the unique and persistent location code + associated with this virtual I/O Adapters +- linux,sml-base : 64-bit base address of the reserved memory allocated + for the firmware event log +- linux,sml-size : size of the memory allocated for the firmware event log + +Example (IBM Virtual Trusted Platform Module) +--------------------------------------------- + + vtpm@30000003 { + ibm,#dma-size-cells = <0x2>; + compatible = "IBM,vtpm"; + device_type = "IBM,vtpm"; + ibm,my-drc-index = <0x30000003>; + ibm,#dma-address-cells = <0x2>; + linux,sml-base = <0xc60e 0x0>; + interrupts = <0xa0003 0x0>; + ibm,my-dma-window = <0x10000003 0x0 0x0 0x0 0x10000000>; + ibm,loc-code = "U8286.41A.10082DV-V3-C3"; + reg = <0x30000003>; + linux,sml-size = <0xbce10200>; + }; diff --git a/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt b/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt new file mode 100644 index 000000000..0dc121b6e --- /dev/null +++ b/Documentation/devicetree/bindings/security/tpm/st33zp24-i2c.txt @@ -0,0 +1,34 @@ +* STMicroelectronics SAS. ST33ZP24 TPM SoC + +Required properties: +- compatible: Should be "st,st33zp24-i2c". +- clock-frequency: I²C work frequency. +- reg: address on the bus + +Optional ST33ZP24 Properties: +- interrupts: GPIO interrupt to which the chip is connected +- lpcpd-gpios: Output GPIO pin used for ST33ZP24 power management D1/D2 state. +If set, power must be present when the platform is going into sleep/hibernate mode. + +Optional SoC Specific Properties: +- pinctrl-names: Contains only one value - "default". +- pintctrl-0: Specifies the pin control groups used for this controller. + +Example (for ARM-based BeagleBoard xM with ST33ZP24 on I2C2): + +&i2c2 { + + + st33zp24: st33zp24@13 { + + compatible = "st,st33zp24-i2c"; + + reg = <0x13>; + clock-frequency = <400000>; + + interrupt-parent = <&gpio5>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; + + lpcpd-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>; + }; +}; diff --git a/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt b/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt new file mode 100644 index 000000000..37198971f --- /dev/null +++ b/Documentation/devicetree/bindings/security/tpm/st33zp24-spi.txt @@ -0,0 +1,32 @@ +* STMicroelectronics SAS. ST33ZP24 TPM SoC + +Required properties: +- compatible: Should be "st,st33zp24-spi". +- spi-max-frequency: Maximum SPI frequency (<= 10000000). + +Optional ST33ZP24 Properties: +- interrupts: GPIO interrupt to which the chip is connected +- lpcpd-gpios: Output GPIO pin used for ST33ZP24 power management D1/D2 state. +If set, power must be present when the platform is going into sleep/hibernate mode. + +Optional SoC Specific Properties: +- pinctrl-names: Contains only one value - "default". +- pintctrl-0: Specifies the pin control groups used for this controller. + +Example (for ARM-based BeagleBoard xM with ST33ZP24 on SPI4): + +&mcspi4 { + + + st33zp24@0 { + + compatible = "st,st33zp24-spi"; + + spi-max-frequency = <10000000>; + + interrupt-parent = <&gpio5>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; + + lpcpd-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>; + }; +}; diff --git a/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt b/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt new file mode 100644 index 000000000..a65d7b71e --- /dev/null +++ b/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt @@ -0,0 +1,26 @@ +* Device Tree Bindings for I2C based Trusted Platform Module(TPM) + +Required properties: + +- compatible : 'manufacturer,model', eg. nuvoton,npct650 +- label : human readable string describing the device, eg. "tpm" +- linux,sml-base : 64-bit base address of the reserved memory allocated for + the firmware event log +- linux,sml-size : size of the memory allocated for the firmware event log + +Optional properties: + +- powered-while-suspended: present when the TPM is left powered on between + suspend and resume (makes the suspend/resume + callbacks do nothing). + +Example (for OpenPower Systems with Nuvoton TPM 2.0 on I2C) +---------------------------------------------------------- + +tpm@57 { + reg = <0x57>; + label = "tpm"; + compatible = "nuvoton,npct650", "nuvoton,npct601"; + linux,sml-base = <0x7f 0xfd450000>; + linux,sml-size = <0x10000>; +}; diff --git a/Documentation/devicetree/bindings/security/tpm/tpm_tis_mmio.txt b/Documentation/devicetree/bindings/security/tpm/tpm_tis_mmio.txt new file mode 100644 index 000000000..7c6304426 --- /dev/null +++ b/Documentation/devicetree/bindings/security/tpm/tpm_tis_mmio.txt @@ -0,0 +1,25 @@ +Trusted Computing Group MMIO Trusted Platform Module + +The TCG defines multi vendor standard for accessing a TPM chip, this +is the standard protocol defined to access the TPM via MMIO. Typically +this interface will be implemented over Intel's LPC bus. + +Refer to the 'TCG PC Client Specific TPM Interface Specification (TIS)' TCG +publication for the specification. + +Required properties: + +- compatible: should contain a string below for the chip, followed by + "tcg,tpm-tis-mmio". Valid chip strings are: + * "atmel,at97sc3204" +- reg: The location of the MMIO registers, should be at least 0x5000 bytes +- interrupts: An optional interrupt indicating command completion. + +Example: + + tpm_tis@90000 { + compatible = "atmel,at97sc3204", "tcg,tpm-tis-mmio"; + reg = <0x90000 0x5000>; + interrupt-parent = <&EIC0>; + interrupts = <1 2>; + }; diff --git a/Documentation/devicetree/bindings/security/tpm/tpm_tis_spi.txt b/Documentation/devicetree/bindings/security/tpm/tpm_tis_spi.txt new file mode 100644 index 000000000..b800667da --- /dev/null +++ b/Documentation/devicetree/bindings/security/tpm/tpm_tis_spi.txt @@ -0,0 +1,23 @@ +Required properties: +- compatible: should be one of the following + "st,st33htpm-spi" + "infineon,slb9670" + "tcg,tpm_tis-spi" +- spi-max-frequency: Maximum SPI frequency (depends on TPMs). + +Optional SoC Specific Properties: +- pinctrl-names: Contains only one value - "default". +- pintctrl-0: Specifies the pin control groups used for this controller. + +Example (for ARM-based BeagleBoard xM with TPM_TIS on SPI4): + +&mcspi4 { + + + tpm_tis@0 { + + compatible = "tcg,tpm_tis-spi"; + + spi-max-frequency = <10000000>; + }; +}; |