summaryrefslogtreecommitdiffstats
path: root/Documentation/driver-api/usb/usb3-debug-port.rst
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
commit2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch)
tree848558de17fb3008cdf4d861b01ac7781903ce39 /Documentation/driver-api/usb/usb3-debug-port.rst
parentInitial commit. (diff)
downloadlinux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz
linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip
Adding upstream version 6.1.76.upstream/6.1.76upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'Documentation/driver-api/usb/usb3-debug-port.rst')
-rw-r--r--Documentation/driver-api/usb/usb3-debug-port.rst152
1 files changed, 152 insertions, 0 deletions
diff --git a/Documentation/driver-api/usb/usb3-debug-port.rst b/Documentation/driver-api/usb/usb3-debug-port.rst
new file mode 100644
index 000000000..b9fd131f4
--- /dev/null
+++ b/Documentation/driver-api/usb/usb3-debug-port.rst
@@ -0,0 +1,152 @@
+===============
+USB3 debug port
+===============
+
+:Author: Lu Baolu <baolu.lu@linux.intel.com>
+:Date: March 2017
+
+GENERAL
+=======
+
+This is a HOWTO for using the USB3 debug port on x86 systems.
+
+Before using any kernel debugging functionality based on USB3
+debug port, you need to::
+
+ 1) check whether any USB3 debug port is available in
+ your system;
+ 2) check which port is used for debugging purposes;
+ 3) have a USB 3.0 super-speed A-to-A debugging cable.
+
+INTRODUCTION
+============
+
+The xHCI debug capability (DbC) is an optional but standalone
+functionality provided by the xHCI host controller. The xHCI
+specification describes DbC in the section 7.6.
+
+When DbC is initialized and enabled, it will present a debug
+device through the debug port (normally the first USB3
+super-speed port). The debug device is fully compliant with
+the USB framework and provides the equivalent of a very high
+performance full-duplex serial link between the debug target
+(the system under debugging) and a debug host.
+
+EARLY PRINTK
+============
+
+DbC has been designed to log early printk messages. One use for
+this feature is kernel debugging. For example, when your machine
+crashes very early before the regular console code is initialized.
+Other uses include simpler, lockless logging instead of a full-
+blown printk console driver and klogd.
+
+On the debug target system, you need to customize a debugging
+kernel with CONFIG_EARLY_PRINTK_USB_XDBC enabled. And, add below
+kernel boot parameter::
+
+ "earlyprintk=xdbc"
+
+If there are multiple xHCI controllers in your system, you can
+append a host contoller index to this kernel parameter. This
+index starts from 0.
+
+Current design doesn't support DbC runtime suspend/resume. As
+the result, you'd better disable runtime power management for
+USB subsystem by adding below kernel boot parameter::
+
+ "usbcore.autosuspend=-1"
+
+Before starting the debug target, you should connect the debug
+port to a USB port (root port or port of any external hub) on
+the debug host. The cable used to connect these two ports
+should be a USB 3.0 super-speed A-to-A debugging cable.
+
+During early boot of the debug target, DbC will be detected and
+initialized. After initialization, the debug host should be able
+to enumerate the debug device in debug target. The debug host
+will then bind the debug device with the usb_debug driver module
+and create the /dev/ttyUSB device.
+
+If the debug device enumeration goes smoothly, you should be able
+to see below kernel messages on the debug host::
+
+ # tail -f /var/log/kern.log
+ [ 1815.983374] usb 4-3: new SuperSpeed USB device number 4 using xhci_hcd
+ [ 1815.999595] usb 4-3: LPM exit latency is zeroed, disabling LPM.
+ [ 1815.999899] usb 4-3: New USB device found, idVendor=1d6b, idProduct=0004
+ [ 1815.999902] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
+ [ 1815.999903] usb 4-3: Product: Remote GDB
+ [ 1815.999904] usb 4-3: Manufacturer: Linux
+ [ 1815.999905] usb 4-3: SerialNumber: 0001
+ [ 1816.000240] usb_debug 4-3:1.0: xhci_dbc converter detected
+ [ 1816.000360] usb 4-3: xhci_dbc converter now attached to ttyUSB0
+
+You can use any communication program, for example minicom, to
+read and view the messages. Below simple bash scripts can help
+you to check the sanity of the setup.
+
+.. code-block:: sh
+
+ ===== start of bash scripts =============
+ #!/bin/bash
+
+ while true ; do
+ while [ ! -d /sys/class/tty/ttyUSB0 ] ; do
+ :
+ done
+ cat /dev/ttyUSB0
+ done
+ ===== end of bash scripts ===============
+
+Serial TTY
+==========
+
+The DbC support has been added to the xHCI driver. You can get a
+debug device provided by the DbC at runtime.
+
+In order to use this, you need to make sure your kernel has been
+configured to support USB_XHCI_DBGCAP. A sysfs attribute under
+the xHCI device node is used to enable or disable DbC. By default,
+DbC is disabled::
+
+ root@target:/sys/bus/pci/devices/0000:00:14.0# cat dbc
+ disabled
+
+Enable DbC with the following command::
+
+ root@target:/sys/bus/pci/devices/0000:00:14.0# echo enable > dbc
+
+You can check the DbC state at anytime::
+
+ root@target:/sys/bus/pci/devices/0000:00:14.0# cat dbc
+ enabled
+
+Connect the debug target to the debug host with a USB 3.0 super-
+speed A-to-A debugging cable. You can see /dev/ttyDBC0 created
+on the debug target. You will see below kernel message lines::
+
+ root@target: tail -f /var/log/kern.log
+ [ 182.730103] xhci_hcd 0000:00:14.0: DbC connected
+ [ 191.169420] xhci_hcd 0000:00:14.0: DbC configured
+ [ 191.169597] xhci_hcd 0000:00:14.0: DbC now attached to /dev/ttyDBC0
+
+Accordingly, the DbC state has been brought up to::
+
+ root@target:/sys/bus/pci/devices/0000:00:14.0# cat dbc
+ configured
+
+On the debug host, you will see the debug device has been enumerated.
+You will see below kernel message lines::
+
+ root@host: tail -f /var/log/kern.log
+ [ 79.454780] usb 2-2.1: new SuperSpeed USB device number 3 using xhci_hcd
+ [ 79.475003] usb 2-2.1: LPM exit latency is zeroed, disabling LPM.
+ [ 79.475389] usb 2-2.1: New USB device found, idVendor=1d6b, idProduct=0010
+ [ 79.475390] usb 2-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
+ [ 79.475391] usb 2-2.1: Product: Linux USB Debug Target
+ [ 79.475392] usb 2-2.1: Manufacturer: Linux Foundation
+ [ 79.475393] usb 2-2.1: SerialNumber: 0001
+
+The debug device works now. You can use any communication or debugging
+program to talk between the host and the target.