Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 178 insertions, 0 deletions

diff --git a/Documentation/maintainer/pull-requests.rst b/Documentation/maintainer/pull-requests.rst
new file mode 100644
index 000000000..e072de60c
--- /dev/null
+++ b/Documentation/maintainer/pull-requests.rst
@@ -0,0 +1,178 @@
+.. _pullrequests:
+
+Creating Pull Requests
+======================
+
+This chapter describes how maintainers can create and submit pull requests
+to other maintainers. This is useful for transferring changes from one
+maintainers tree to another maintainers tree.
+
+This document was written by Tobin C. Harding (who at that time, was not an
+experienced maintainer) primarily from comments made by Greg Kroah-Hartman
+and Linus Torvalds on LKML. Suggestions and fixes by Jonathan Corbet and
+Mauro Carvalho Chehab.  Misrepresentation was unintentional but inevitable,
+please direct abuse to Tobin C. Harding <me@tobin.cc>.
+
+Original email thread::
+
+	https://lore.kernel.org/r/20171114110500.GA21175@kroah.com
+
+
+Create Branch
+-------------
+
+To start with you will need to have all the changes you wish to include in
+the pull request on a separate branch. Typically you will base this branch
+off of a branch in the developers tree whom you intend to send the pull
+request to.
+
+In order to create the pull request you must first tag the branch that you
+have just created. It is recommended that you choose a meaningful tag name,
+in a way that you and others can understand, even after some time.  A good
+practice is to include in the name an indicator of the subsystem of origin
+and the target kernel version.
+
+Greg offers the following. A pull request with miscellaneous stuff for
+drivers/char, to be applied at the Kernel version 4.15-rc1 could be named
+as ``char-misc-4.15-rc1``. If such tag would be produced from a branch
+named ``char-misc-next``, you would be using the following command::
+
+        git tag -s char-misc-4.15-rc1 char-misc-next
+
+that will create a signed tag called ``char-misc-4.15-rc1`` based on the
+last commit in the ``char-misc-next`` branch, and sign it with your gpg key
+(see :ref:`Documentation/maintainer/configure-git.rst <configuregit>`).
+
+Linus will only accept pull requests based on a signed tag. Other
+maintainers may differ.
+
+When you run the above command ``git`` will drop you into an editor and ask
+you to describe the tag.  In this case, you are describing a pull request,
+so outline what is contained here, why it should be merged, and what, if
+any, testing has been done.  All of this information will end up in the tag
+itself, and then in the merge commit that the maintainer makes if/when they
+merge the pull request. So write it up well, as it will be in the kernel
+tree for forever.
+
+As said by Linus::
+
+	Anyway, at least to me, the important part is the *message*. I want
+	to understand what I'm pulling, and why I should pull it. I also
+	want to use that message as the message for the merge, so it should
+	not just make sense to me, but make sense as a historical record
+	too.
+
+	Note that if there is something odd about the pull request, that
+	should very much be in the explanation. If you're touching files
+	that you don't maintain, explain _why_. I will see it in the
+	diffstat anyway, and if you didn't mention it, I'll just be extra
+	suspicious.  And when you send me new stuff after the merge window
+	(or even bug-fixes, but ones that look scary), explain not just
+	what they do and why they do it, but explain the _timing_. What
+	happened that this didn't go through the merge window..
+
+	I will take both what you write in the email pull request _and_ in
+	the signed tag, so depending on your workflow, you can either
+	describe your work in the signed tag (which will also automatically
+	make it into the pull request email), or you can make the signed
+	tag just a placeholder with nothing interesting in it, and describe
+	the work later when you actually send me the pull request.
+
+	And yes, I will edit the message. Partly because I tend to do just
+	trivial formatting (the whole indentation and quoting etc), but
+	partly because part of the message may make sense for me at pull
+	time (describing the conflicts and your personal issues for sending
+	it right now), but may not make sense in the context of a merge
+	commit message, so I will try to make it all make sense. I will
+	also fix any speeling mistaeks and bad grammar I notice,
+	particularly for non-native speakers (but also for native ones
+	;^). But I may miss some, or even add some.
+
+			Linus
+
+Greg gives, as an example pull request::
+
+	Char/Misc patches for 4.15-rc1
+
+	Here is the big char/misc patch set for the 4.15-rc1 merge window.
+	Contained in here is the normal set of new functions added to all
+	of these crazy drivers, as well as the following brand new
+	subsystems:
+		- time_travel_controller: Finally a set of drivers for the
+		  latest time travel bus architecture that provides i/o to
+		  the CPU before it asked for it, allowing uninterrupted
+		  processing
+		- relativity_shifters: due to the affect that the
+		  time_travel_controllers have on the overall system, there
+		  was a need for a new set of relativity shifter drivers to
+		  accommodate the newly formed black holes that would
+		  threaten to suck CPUs into them.  This subsystem handles
+		  this in a way to successfully neutralize the problems.
+		  There is a Kconfig option to force these to be enabled
+		  when needed, so problems should not occur.
+
+	All of these patches have been successfully tested in the latest
+	linux-next releases, and the original problems that it found have
+	all been resolved (apologies to anyone living near Canberra for the
+	lack of the Kconfig options in the earlier versions of the
+	linux-next tree creations.)
+
+	Signed-off-by: Your-name-here <your_email@domain>
+
+
+The tag message format is just like a git commit id.  One line at the top
+for a "summary subject" and be sure to sign-off at the bottom.
+
+Now that you have a local signed tag, you need to push it up to where it
+can be retrieved::
+
+	git push origin char-misc-4.15-rc1
+
+
+Create Pull Request
+-------------------
+
+The last thing to do is create the pull request message.  ``git`` handily
+will do this for you with the ``git request-pull`` command, but it needs a
+bit of help determining what you want to pull, and on what to base the pull
+against (to show the correct changes to be pulled and the diffstat). The
+following command(s) will generate a pull request::
+
+	git request-pull master git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git/ char-misc-4.15-rc1
+
+Quoting Greg::
+
+	This is asking git to compare the difference from the
+	'char-misc-4.15-rc1' tag location, to the head of the 'master'
+	branch (which in my case points to the last location in Linus's
+	tree that I diverged from, usually a -rc release) and to use the
+	git:// protocol to pull from.  If you wish to use https://, that
+	can be used here instead as well (but note that some people behind
+	firewalls will have problems with https git pulls).
+
+	If the char-misc-4.15-rc1 tag is not present in the repo that I am
+	asking to be pulled from, git will complain saying it is not there,
+	a handy way to remember to actually push it to a public location.
+
+	The output of 'git request-pull' will contain the location of the
+	git tree and specific tag to pull from, and the full text
+	description of that tag (which is why you need to provide good
+	information in that tag).  It will also create a diffstat of the
+	pull request, and a shortlog of the individual commits that the
+	pull request will provide.
+
+Linus responded that he tends to prefer the ``git://`` protocol. Other
+maintainers may have different preferences. Also, note that if you are
+creating pull requests without a signed tag then ``https://`` may be a
+better choice. Please see the original thread for the full discussion.
+
+
+Submit Pull Request
+-------------------
+
+A pull request is submitted in the same way as an ordinary patch. Send as
+inline email to the maintainer and CC LKML and any sub-system specific
+lists if required. Pull requests to Linus typically have a subject line
+something like::
+
+	[GIT PULL] <subsystem> changes for v4.15-rc1