Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 320 insertions, 0 deletions

diff --git a/Documentation/timers/no_hz.rst b/Documentation/timers/no_hz.rst
new file mode 100644
index 000000000..f8786be15
--- /dev/null
+++ b/Documentation/timers/no_hz.rst
@@ -0,0 +1,320 @@
+======================================
+NO_HZ: Reducing Scheduling-Clock Ticks
+======================================
+
+
+This document describes Kconfig options and boot parameters that can
+reduce the number of scheduling-clock interrupts, thereby improving energy
+efficiency and reducing OS jitter.  Reducing OS jitter is important for
+some types of computationally intensive high-performance computing (HPC)
+applications and for real-time applications.
+
+There are three main ways of managing scheduling-clock interrupts
+(also known as "scheduling-clock ticks" or simply "ticks"):
+
+1.	Never omit scheduling-clock ticks (CONFIG_HZ_PERIODIC=y or
+	CONFIG_NO_HZ=n for older kernels).  You normally will -not-
+	want to choose this option.
+
+2.	Omit scheduling-clock ticks on idle CPUs (CONFIG_NO_HZ_IDLE=y or
+	CONFIG_NO_HZ=y for older kernels).  This is the most common
+	approach, and should be the default.
+
+3.	Omit scheduling-clock ticks on CPUs that are either idle or that
+	have only one runnable task (CONFIG_NO_HZ_FULL=y).  Unless you
+	are running realtime applications or certain types of HPC
+	workloads, you will normally -not- want this option.
+
+These three cases are described in the following three sections, followed
+by a third section on RCU-specific considerations, a fourth section
+discussing testing, and a fifth and final section listing known issues.
+
+
+Never Omit Scheduling-Clock Ticks
+=================================
+
+Very old versions of Linux from the 1990s and the very early 2000s
+are incapable of omitting scheduling-clock ticks.  It turns out that
+there are some situations where this old-school approach is still the
+right approach, for example, in heavy workloads with lots of tasks
+that use short bursts of CPU, where there are very frequent idle
+periods, but where these idle periods are also quite short (tens or
+hundreds of microseconds).  For these types of workloads, scheduling
+clock interrupts will normally be delivered any way because there
+will frequently be multiple runnable tasks per CPU.  In these cases,
+attempting to turn off the scheduling clock interrupt will have no effect
+other than increasing the overhead of switching to and from idle and
+transitioning between user and kernel execution.
+
+This mode of operation can be selected using CONFIG_HZ_PERIODIC=y (or
+CONFIG_NO_HZ=n for older kernels).
+
+However, if you are instead running a light workload with long idle
+periods, failing to omit scheduling-clock interrupts will result in
+excessive power consumption.  This is especially bad on battery-powered
+devices, where it results in extremely short battery lifetimes.  If you
+are running light workloads, you should therefore read the following
+section.
+
+In addition, if you are running either a real-time workload or an HPC
+workload with short iterations, the scheduling-clock interrupts can
+degrade your applications performance.  If this describes your workload,
+you should read the following two sections.
+
+
+Omit Scheduling-Clock Ticks For Idle CPUs
+=========================================
+
+If a CPU is idle, there is little point in sending it a scheduling-clock
+interrupt.  After all, the primary purpose of a scheduling-clock interrupt
+is to force a busy CPU to shift its attention among multiple duties,
+and an idle CPU has no duties to shift its attention among.
+
+An idle CPU that is not receiving scheduling-clock interrupts is said to
+be "dyntick-idle", "in dyntick-idle mode", "in nohz mode", or "running
+tickless".  The remainder of this document will use "dyntick-idle mode".
+
+The CONFIG_NO_HZ_IDLE=y Kconfig option causes the kernel to avoid sending
+scheduling-clock interrupts to idle CPUs, which is critically important
+both to battery-powered devices and to highly virtualized mainframes.
+A battery-powered device running a CONFIG_HZ_PERIODIC=y kernel would
+drain its battery very quickly, easily 2-3 times as fast as would the
+same device running a CONFIG_NO_HZ_IDLE=y kernel.  A mainframe running
+1,500 OS instances might find that half of its CPU time was consumed by
+unnecessary scheduling-clock interrupts.  In these situations, there
+is strong motivation to avoid sending scheduling-clock interrupts to
+idle CPUs.  That said, dyntick-idle mode is not free:
+
+1.	It increases the number of instructions executed on the path
+	to and from the idle loop.
+
+2.	On many architectures, dyntick-idle mode also increases the
+	number of expensive clock-reprogramming operations.
+
+Therefore, systems with aggressive real-time response constraints often
+run CONFIG_HZ_PERIODIC=y kernels (or CONFIG_NO_HZ=n for older kernels)
+in order to avoid degrading from-idle transition latencies.
+
+There is also a boot parameter "nohz=" that can be used to disable
+dyntick-idle mode in CONFIG_NO_HZ_IDLE=y kernels by specifying "nohz=off".
+By default, CONFIG_NO_HZ_IDLE=y kernels boot with "nohz=on", enabling
+dyntick-idle mode.
+
+
+Omit Scheduling-Clock Ticks For CPUs With Only One Runnable Task
+================================================================
+
+If a CPU has only one runnable task, there is little point in sending it
+a scheduling-clock interrupt because there is no other task to switch to.
+Note that omitting scheduling-clock ticks for CPUs with only one runnable
+task implies also omitting them for idle CPUs.
+
+The CONFIG_NO_HZ_FULL=y Kconfig option causes the kernel to avoid
+sending scheduling-clock interrupts to CPUs with a single runnable task,
+and such CPUs are said to be "adaptive-ticks CPUs".  This is important
+for applications with aggressive real-time response constraints because
+it allows them to improve their worst-case response times by the maximum
+duration of a scheduling-clock interrupt.  It is also important for
+computationally intensive short-iteration workloads:  If any CPU is
+delayed during a given iteration, all the other CPUs will be forced to
+wait idle while the delayed CPU finishes.  Thus, the delay is multiplied
+by one less than the number of CPUs.  In these situations, there is
+again strong motivation to avoid sending scheduling-clock interrupts.
+
+By default, no CPU will be an adaptive-ticks CPU.  The "nohz_full="
+boot parameter specifies the adaptive-ticks CPUs.  For example,
+"nohz_full=1,6-8" says that CPUs 1, 6, 7, and 8 are to be adaptive-ticks
+CPUs.  Note that you are prohibited from marking all of the CPUs as
+adaptive-tick CPUs:  At least one non-adaptive-tick CPU must remain
+online to handle timekeeping tasks in order to ensure that system
+calls like gettimeofday() returns accurate values on adaptive-tick CPUs.
+(This is not an issue for CONFIG_NO_HZ_IDLE=y because there are no running
+user processes to observe slight drifts in clock rate.)  Therefore, the
+boot CPU is prohibited from entering adaptive-ticks mode.  Specifying a
+"nohz_full=" mask that includes the boot CPU will result in a boot-time
+error message, and the boot CPU will be removed from the mask.  Note that
+this means that your system must have at least two CPUs in order for
+CONFIG_NO_HZ_FULL=y to do anything for you.
+
+Finally, adaptive-ticks CPUs must have their RCU callbacks offloaded.
+This is covered in the "RCU IMPLICATIONS" section below.
+
+Normally, a CPU remains in adaptive-ticks mode as long as possible.
+In particular, transitioning to kernel mode does not automatically change
+the mode.  Instead, the CPU will exit adaptive-ticks mode only if needed,
+for example, if that CPU enqueues an RCU callback.
+
+Just as with dyntick-idle mode, the benefits of adaptive-tick mode do
+not come for free:
+
+1.	CONFIG_NO_HZ_FULL selects CONFIG_NO_HZ_COMMON, so you cannot run
+	adaptive ticks without also running dyntick idle.  This dependency
+	extends down into the implementation, so that all of the costs
+	of CONFIG_NO_HZ_IDLE are also incurred by CONFIG_NO_HZ_FULL.
+
+2.	The user/kernel transitions are slightly more expensive due
+	to the need to inform kernel subsystems (such as RCU) about
+	the change in mode.
+
+3.	POSIX CPU timers prevent CPUs from entering adaptive-tick mode.
+	Real-time applications needing to take actions based on CPU time
+	consumption need to use other means of doing so.
+
+4.	If there are more perf events pending than the hardware can
+	accommodate, they are normally round-robined so as to collect
+	all of them over time.  Adaptive-tick mode may prevent this
+	round-robining from happening.  This will likely be fixed by
+	preventing CPUs with large numbers of perf events pending from
+	entering adaptive-tick mode.
+
+5.	Scheduler statistics for adaptive-tick CPUs may be computed
+	slightly differently than those for non-adaptive-tick CPUs.
+	This might in turn perturb load-balancing of real-time tasks.
+
+Although improvements are expected over time, adaptive ticks is quite
+useful for many types of real-time and compute-intensive applications.
+However, the drawbacks listed above mean that adaptive ticks should not
+(yet) be enabled by default.
+
+
+RCU Implications
+================
+
+There are situations in which idle CPUs cannot be permitted to
+enter either dyntick-idle mode or adaptive-tick mode, the most
+common being when that CPU has RCU callbacks pending.
+
+Avoid this by offloading RCU callback processing to "rcuo" kthreads
+using the CONFIG_RCU_NOCB_CPU=y Kconfig option.  The specific CPUs to
+offload may be selected using The "rcu_nocbs=" kernel boot parameter,
+which takes a comma-separated list of CPUs and CPU ranges, for example,
+"1,3-5" selects CPUs 1, 3, 4, and 5.  Note that CPUs specified by
+the "nohz_full" kernel boot parameter are also offloaded.
+
+The offloaded CPUs will never queue RCU callbacks, and therefore RCU
+never prevents offloaded CPUs from entering either dyntick-idle mode
+or adaptive-tick mode.  That said, note that it is up to userspace to
+pin the "rcuo" kthreads to specific CPUs if desired.  Otherwise, the
+scheduler will decide where to run them, which might or might not be
+where you want them to run.
+
+
+Testing
+=======
+
+So you enable all the OS-jitter features described in this document,
+but do not see any change in your workload's behavior.  Is this because
+your workload isn't affected that much by OS jitter, or is it because
+something else is in the way?  This section helps answer this question
+by providing a simple OS-jitter test suite, which is available on branch
+master of the following git archive:
+
+git://git.kernel.org/pub/scm/linux/kernel/git/frederic/dynticks-testing.git
+
+Clone this archive and follow the instructions in the README file.
+This test procedure will produce a trace that will allow you to evaluate
+whether or not you have succeeded in removing OS jitter from your system.
+If this trace shows that you have removed OS jitter as much as is
+possible, then you can conclude that your workload is not all that
+sensitive to OS jitter.
+
+Note: this test requires that your system have at least two CPUs.
+We do not currently have a good way to remove OS jitter from single-CPU
+systems.
+
+
+Known Issues
+============
+
+*	Dyntick-idle slows transitions to and from idle slightly.
+	In practice, this has not been a problem except for the most
+	aggressive real-time workloads, which have the option of disabling
+	dyntick-idle mode, an option that most of them take.  However,
+	some workloads will no doubt want to use adaptive ticks to
+	eliminate scheduling-clock interrupt latencies.  Here are some
+	options for these workloads:
+
+	a.	Use PMQOS from userspace to inform the kernel of your
+		latency requirements (preferred).
+
+	b.	On x86 systems, use the "idle=mwait" boot parameter.
+
+	c.	On x86 systems, use the "intel_idle.max_cstate=" to limit
+	`	the maximum C-state depth.
+
+	d.	On x86 systems, use the "idle=poll" boot parameter.
+		However, please note that use of this parameter can cause
+		your CPU to overheat, which may cause thermal throttling
+		to degrade your latencies -- and that this degradation can
+		be even worse than that of dyntick-idle.  Furthermore,
+		this parameter effectively disables Turbo Mode on Intel
+		CPUs, which can significantly reduce maximum performance.
+
+*	Adaptive-ticks slows user/kernel transitions slightly.
+	This is not expected to be a problem for computationally intensive
+	workloads, which have few such transitions.  Careful benchmarking
+	will be required to determine whether or not other workloads
+	are significantly affected by this effect.
+
+*	Adaptive-ticks does not do anything unless there is only one
+	runnable task for a given CPU, even though there are a number
+	of other situations where the scheduling-clock tick is not
+	needed.  To give but one example, consider a CPU that has one
+	runnable high-priority SCHED_FIFO task and an arbitrary number
+	of low-priority SCHED_OTHER tasks.  In this case, the CPU is
+	required to run the SCHED_FIFO task until it either blocks or
+	some other higher-priority task awakens on (or is assigned to)
+	this CPU, so there is no point in sending a scheduling-clock
+	interrupt to this CPU.	However, the current implementation
+	nevertheless sends scheduling-clock interrupts to CPUs having a
+	single runnable SCHED_FIFO task and multiple runnable SCHED_OTHER
+	tasks, even though these interrupts are unnecessary.
+
+	And even when there are multiple runnable tasks on a given CPU,
+	there is little point in interrupting that CPU until the current
+	running task's timeslice expires, which is almost always way
+	longer than the time of the next scheduling-clock interrupt.
+
+	Better handling of these sorts of situations is future work.
+
+*	A reboot is required to reconfigure both adaptive idle and RCU
+	callback offloading.  Runtime reconfiguration could be provided
+	if needed, however, due to the complexity of reconfiguring RCU at
+	runtime, there would need to be an earthshakingly good reason.
+	Especially given that you have the straightforward option of
+	simply offloading RCU callbacks from all CPUs and pinning them
+	where you want them whenever you want them pinned.
+
+*	Additional configuration is required to deal with other sources
+	of OS jitter, including interrupts and system-utility tasks
+	and processes.  This configuration normally involves binding
+	interrupts and tasks to particular CPUs.
+
+*	Some sources of OS jitter can currently be eliminated only by
+	constraining the workload.  For example, the only way to eliminate
+	OS jitter due to global TLB shootdowns is to avoid the unmapping
+	operations (such as kernel module unload operations) that
+	result in these shootdowns.  For another example, page faults
+	and TLB misses can be reduced (and in some cases eliminated) by
+	using huge pages and by constraining the amount of memory used
+	by the application.  Pre-faulting the working set can also be
+	helpful, especially when combined with the mlock() and mlockall()
+	system calls.
+
+*	Unless all CPUs are idle, at least one CPU must keep the
+	scheduling-clock interrupt going in order to support accurate
+	timekeeping.
+
+*	If there might potentially be some adaptive-ticks CPUs, there
+	will be at least one CPU keeping the scheduling-clock interrupt
+	going, even if all CPUs are otherwise idle.
+
+	Better handling of this situation is ongoing work.
+
+*	Some process-handling operations still require the occasional
+	scheduling-clock tick.	These operations include calculating CPU
+	load, maintaining sched average, computing CFS entity vruntime,
+	computing avenrun, and carrying out load balancing.  They are
+	currently accommodated by scheduling-clock tick every second
+	or so.	On-going work will eliminate the need even for these
+	infrequent scheduling-clock ticks.