Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 269 insertions, 0 deletions

diff --git a/Documentation/userspace-api/media/v4l/vidioc-g-parm.rst b/Documentation/userspace-api/media/v4l/vidioc-g-parm.rst
new file mode 100644
index 000000000..8b5600fbf
--- /dev/null
+++ b/Documentation/userspace-api/media/v4l/vidioc-g-parm.rst
@@ -0,0 +1,269 @@
+.. SPDX-License-Identifier: GFDL-1.1-no-invariants-or-later
+.. c:namespace:: V4L
+
+.. _VIDIOC_G_PARM:
+
+**********************************
+ioctl VIDIOC_G_PARM, VIDIOC_S_PARM
+**********************************
+
+Name
+====
+
+VIDIOC_G_PARM - VIDIOC_S_PARM - Get or set streaming parameters
+
+Synopsis
+========
+
+.. c:macro:: VIDIOC_G_PARM
+
+``int ioctl(int fd, VIDIOC_G_PARM, v4l2_streamparm *argp)``
+
+.. c:macro:: VIDIOC_S_PARM
+
+``int ioctl(int fd, VIDIOC_S_PARM, v4l2_streamparm *argp)``
+
+Arguments
+=========
+
+``fd``
+    File descriptor returned by :c:func:`open()`.
+
+``argp``
+    Pointer to struct :c:type:`v4l2_streamparm`.
+
+Description
+===========
+
+Applications can request a different frame interval. The capture or
+output device will be reconfigured to support the requested frame
+interval if possible. Optionally drivers may choose to skip or
+repeat frames to achieve the requested frame interval.
+
+For stateful encoders (see :ref:`encoder`) this represents the
+frame interval that is typically embedded in the encoded video stream.
+
+Changing the frame interval shall never change the format. Changing the
+format, on the other hand, may change the frame interval.
+
+Further these ioctls can be used to determine the number of buffers used
+internally by a driver in read/write mode. For implications see the
+section discussing the :c:func:`read()` function.
+
+To get and set the streaming parameters applications call the
+:ref:`VIDIOC_G_PARM <VIDIOC_G_PARM>` and
+:ref:`VIDIOC_S_PARM <VIDIOC_G_PARM>` ioctl, respectively. They take a
+pointer to a struct :c:type:`v4l2_streamparm` which contains a
+union holding separate parameters for input and output devices.
+
+.. tabularcolumns:: |p{3.7cm}|p{3.5cm}|p{10.1cm}|
+
+.. c:type:: v4l2_streamparm
+
+.. flat-table:: struct v4l2_streamparm
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``type``
+      - The buffer (stream) type, same as struct
+	:c:type:`v4l2_format` ``type``, set by the
+	application. See :c:type:`v4l2_buf_type`.
+    * - union {
+      - ``parm``
+    * - struct :c:type:`v4l2_captureparm`
+      - ``capture``
+      - Parameters for capture devices, used when ``type`` is
+	``V4L2_BUF_TYPE_VIDEO_CAPTURE`` or
+	``V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE``.
+    * - struct :c:type:`v4l2_outputparm`
+      - ``output``
+      - Parameters for output devices, used when ``type`` is
+	``V4L2_BUF_TYPE_VIDEO_OUTPUT`` or ``V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE``.
+    * - __u8
+      - ``raw_data``\ [200]
+      - A place holder for future extensions.
+    * - }
+
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
+
+.. c:type:: v4l2_captureparm
+
+.. flat-table:: struct v4l2_captureparm
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``capability``
+      - See :ref:`parm-caps`.
+    * - __u32
+      - ``capturemode``
+      - Set by drivers and applications, see :ref:`parm-flags`.
+    * - struct :c:type:`v4l2_fract`
+      - ``timeperframe``
+      - This is the desired period between successive frames captured by
+	the driver, in seconds.
+    * - :cspan:`2`
+
+	This will configure the speed at which the video source (e.g. a sensor)
+	generates video frames. If the speed is fixed, then the driver may
+	choose to skip or repeat frames in order to achieve the requested
+	frame rate.
+
+	For stateful encoders (see :ref:`encoder`) this represents the
+	frame interval that is typically embedded in the encoded video stream.
+
+	Applications store here the desired frame period, drivers return
+	the actual frame period.
+
+	Changing the video standard (also implicitly by switching
+	the video input) may reset this parameter to the nominal frame
+	period. To reset manually applications can just set this field to
+	zero.
+
+	Drivers support this function only when they set the
+	``V4L2_CAP_TIMEPERFRAME`` flag in the ``capability`` field.
+    * - __u32
+      - ``extendedmode``
+      - Custom (driver specific) streaming parameters. When unused,
+	applications and drivers must set this field to zero. Applications
+	using this field should check the driver name and version, see
+	:ref:`querycap`.
+    * - __u32
+      - ``readbuffers``
+      - Applications set this field to the desired number of buffers used
+	internally by the driver in :c:func:`read()` mode.
+	Drivers return the actual number of buffers. When an application
+	requests zero buffers, drivers should just return the current
+	setting rather than the minimum or an error code. For details see
+	:ref:`rw`.
+    * - __u32
+      - ``reserved``\ [4]
+      - Reserved for future extensions. Drivers and applications must set
+	the array to zero.
+
+
+.. tabularcolumns:: |p{4.4cm}|p{4.4cm}|p{8.5cm}|
+
+.. c:type:: v4l2_outputparm
+
+.. flat-table:: struct v4l2_outputparm
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       1 1 2
+
+    * - __u32
+      - ``capability``
+      - See :ref:`parm-caps`.
+    * - __u32
+      - ``outputmode``
+      - Set by drivers and applications, see :ref:`parm-flags`.
+    * - struct :c:type:`v4l2_fract`
+      - ``timeperframe``
+      - This is the desired period between successive frames output by the
+	driver, in seconds.
+    * - :cspan:`2`
+
+	The field is intended to repeat frames on the driver side in
+	:c:func:`write()` mode (in streaming mode timestamps
+	can be used to throttle the output), saving I/O bandwidth.
+
+	For stateful encoders (see :ref:`encoder`) this represents the
+	frame interval that is typically embedded in the encoded video stream
+	and it provides a hint to the encoder of the speed at which raw
+	frames are queued up to the encoder.
+
+	Applications store here the desired frame period, drivers return
+	the actual frame period.
+
+	Changing the video standard (also implicitly by switching
+	the video output) may reset this parameter to the nominal frame
+	period. To reset manually applications can just set this field to
+	zero.
+
+	Drivers support this function only when they set the
+	``V4L2_CAP_TIMEPERFRAME`` flag in the ``capability`` field.
+    * - __u32
+      - ``extendedmode``
+      - Custom (driver specific) streaming parameters. When unused,
+	applications and drivers must set this field to zero. Applications
+	using this field should check the driver name and version, see
+	:ref:`querycap`.
+    * - __u32
+      - ``writebuffers``
+      - Applications set this field to the desired number of buffers used
+	internally by the driver in :c:func:`write()` mode. Drivers
+	return the actual number of buffers. When an application requests
+	zero buffers, drivers should just return the current setting
+	rather than the minimum or an error code. For details see
+	:ref:`rw`.
+    * - __u32
+      - ``reserved``\ [4]
+      - Reserved for future extensions. Drivers and applications must set
+	the array to zero.
+
+
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
+
+.. _parm-caps:
+
+.. flat-table:: Streaming Parameters Capabilities
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - ``V4L2_CAP_TIMEPERFRAME``
+      - 0x1000
+      - The frame period can be modified by setting the ``timeperframe``
+	field.
+
+
+.. tabularcolumns:: |p{6.6cm}|p{2.2cm}|p{8.5cm}|
+
+.. _parm-flags:
+
+.. flat-table:: Capture Parameters Flags
+    :header-rows:  0
+    :stub-columns: 0
+    :widths:       3 1 4
+
+    * - ``V4L2_MODE_HIGHQUALITY``
+      - 0x0001
+      - High quality imaging mode. High quality mode is intended for still
+	imaging applications. The idea is to get the best possible image
+	quality that the hardware can deliver. It is not defined how the
+	driver writer may achieve that; it will depend on the hardware and
+	the ingenuity of the driver writer. High quality mode is a
+	different mode from the regular motion video capture modes. In
+	high quality mode:
+
+	-  The driver may be able to capture higher resolutions than for
+	   motion capture.
+
+	-  The driver may support fewer pixel formats than motion capture
+	   (eg; true color).
+
+	-  The driver may capture and arithmetically combine multiple
+	   successive fields or frames to remove color edge artifacts and
+	   reduce the noise in the video data.
+
+	-  The driver may capture images in slices like a scanner in order
+	   to handle larger format images than would otherwise be
+	   possible.
+
+	-  An image capture operation may be significantly slower than
+	   motion capture.
+
+	-  Moving objects in the image might have excessive motion blur.
+
+	-  Capture might only work through the :c:func:`read()` call.
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.