Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 446 insertions, 0 deletions

diff --git a/Documentation/virt/kvm/x86/amd-memory-encryption.rst b/Documentation/virt/kvm/x86/amd-memory-encryption.rst
new file mode 100644
index 000000000..935aaeb97
--- /dev/null
+++ b/Documentation/virt/kvm/x86/amd-memory-encryption.rst
@@ -0,0 +1,446 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======================================
+Secure Encrypted Virtualization (SEV)
+======================================
+
+Overview
+========
+
+Secure Encrypted Virtualization (SEV) is a feature found on AMD processors.
+
+SEV is an extension to the AMD-V architecture which supports running
+virtual machines (VMs) under the control of a hypervisor. When enabled,
+the memory contents of a VM will be transparently encrypted with a key
+unique to that VM.
+
+The hypervisor can determine the SEV support through the CPUID
+instruction. The CPUID function 0x8000001f reports information related
+to SEV::
+
+	0x8000001f[eax]:
+			Bit[1] 	indicates support for SEV
+	    ...
+		  [ecx]:
+			Bits[31:0]  Number of encrypted guests supported simultaneously
+
+If support for SEV is present, MSR 0xc001_0010 (MSR_AMD64_SYSCFG) and MSR 0xc001_0015
+(MSR_K7_HWCR) can be used to determine if it can be enabled::
+
+	0xc001_0010:
+		Bit[23]	   1 = memory encryption can be enabled
+			   0 = memory encryption can not be enabled
+
+	0xc001_0015:
+		Bit[0]	   1 = memory encryption can be enabled
+			   0 = memory encryption can not be enabled
+
+When SEV support is available, it can be enabled in a specific VM by
+setting the SEV bit before executing VMRUN.::
+
+	VMCB[0x90]:
+		Bit[1]	    1 = SEV is enabled
+			    0 = SEV is disabled
+
+SEV hardware uses ASIDs to associate a memory encryption key with a VM.
+Hence, the ASID for the SEV-enabled guests must be from 1 to a maximum value
+defined in the CPUID 0x8000001f[ecx] field.
+
+SEV Key Management
+==================
+
+The SEV guest key management is handled by a separate processor called the AMD
+Secure Processor (AMD-SP). Firmware running inside the AMD-SP provides a secure
+key management interface to perform common hypervisor activities such as
+encrypting bootstrap code, snapshot, migrating and debugging the guest. For more
+information, see the SEV Key Management spec [api-spec]_
+
+The main ioctl to access SEV is KVM_MEMORY_ENCRYPT_OP.  If the argument
+to KVM_MEMORY_ENCRYPT_OP is NULL, the ioctl returns 0 if SEV is enabled
+and ``ENOTTY` if it is disabled (on some older versions of Linux,
+the ioctl runs normally even with a NULL argument, and therefore will
+likely return ``EFAULT``).  If non-NULL, the argument to KVM_MEMORY_ENCRYPT_OP
+must be a struct kvm_sev_cmd::
+
+       struct kvm_sev_cmd {
+               __u32 id;
+               __u64 data;
+               __u32 error;
+               __u32 sev_fd;
+       };
+
+
+The ``id`` field contains the subcommand, and the ``data`` field points to
+another struct containing arguments specific to command.  The ``sev_fd``
+should point to a file descriptor that is opened on the ``/dev/sev``
+device, if needed (see individual commands).
+
+On output, ``error`` is zero on success, or an error code.  Error codes
+are defined in ``<linux/psp-dev.h>``.
+
+KVM implements the following commands to support common lifecycle events of SEV
+guests, such as launching, running, snapshotting, migrating and decommissioning.
+
+1. KVM_SEV_INIT
+---------------
+
+The KVM_SEV_INIT command is used by the hypervisor to initialize the SEV platform
+context. In a typical workflow, this command should be the first command issued.
+
+The firmware can be initialized either by using its own non-volatile storage or
+the OS can manage the NV storage for the firmware using the module parameter
+``init_ex_path``. If the file specified by ``init_ex_path`` does not exist or
+is invalid, the OS will create or override the file with output from PSP.
+
+Returns: 0 on success, -negative on error
+
+2. KVM_SEV_LAUNCH_START
+-----------------------
+
+The KVM_SEV_LAUNCH_START command is used for creating the memory encryption
+context. To create the encryption context, user must provide a guest policy,
+the owner's public Diffie-Hellman (PDH) key and session information.
+
+Parameters: struct  kvm_sev_launch_start (in/out)
+
+Returns: 0 on success, -negative on error
+
+::
+
+        struct kvm_sev_launch_start {
+                __u32 handle;           /* if zero then firmware creates a new handle */
+                __u32 policy;           /* guest's policy */
+
+                __u64 dh_uaddr;         /* userspace address pointing to the guest owner's PDH key */
+                __u32 dh_len;
+
+                __u64 session_addr;     /* userspace address which points to the guest session information */
+                __u32 session_len;
+        };
+
+On success, the 'handle' field contains a new handle and on error, a negative value.
+
+KVM_SEV_LAUNCH_START requires the ``sev_fd`` field to be valid.
+
+For more details, see SEV spec Section 6.2.
+
+3. KVM_SEV_LAUNCH_UPDATE_DATA
+-----------------------------
+
+The KVM_SEV_LAUNCH_UPDATE_DATA is used for encrypting a memory region. It also
+calculates a measurement of the memory contents. The measurement is a signature
+of the memory contents that can be sent to the guest owner as an attestation
+that the memory was encrypted correctly by the firmware.
+
+Parameters (in): struct  kvm_sev_launch_update_data
+
+Returns: 0 on success, -negative on error
+
+::
+
+        struct kvm_sev_launch_update {
+                __u64 uaddr;    /* userspace address to be encrypted (must be 16-byte aligned) */
+                __u32 len;      /* length of the data to be encrypted (must be 16-byte aligned) */
+        };
+
+For more details, see SEV spec Section 6.3.
+
+4. KVM_SEV_LAUNCH_MEASURE
+-------------------------
+
+The KVM_SEV_LAUNCH_MEASURE command is used to retrieve the measurement of the
+data encrypted by the KVM_SEV_LAUNCH_UPDATE_DATA command. The guest owner may
+wait to provide the guest with confidential information until it can verify the
+measurement. Since the guest owner knows the initial contents of the guest at
+boot, the measurement can be verified by comparing it to what the guest owner
+expects.
+
+If len is zero on entry, the measurement blob length is written to len and
+uaddr is unused.
+
+Parameters (in): struct  kvm_sev_launch_measure
+
+Returns: 0 on success, -negative on error
+
+::
+
+        struct kvm_sev_launch_measure {
+                __u64 uaddr;    /* where to copy the measurement */
+                __u32 len;      /* length of measurement blob */
+        };
+
+For more details on the measurement verification flow, see SEV spec Section 6.4.
+
+5. KVM_SEV_LAUNCH_FINISH
+------------------------
+
+After completion of the launch flow, the KVM_SEV_LAUNCH_FINISH command can be
+issued to make the guest ready for the execution.
+
+Returns: 0 on success, -negative on error
+
+6. KVM_SEV_GUEST_STATUS
+-----------------------
+
+The KVM_SEV_GUEST_STATUS command is used to retrieve status information about a
+SEV-enabled guest.
+
+Parameters (out): struct kvm_sev_guest_status
+
+Returns: 0 on success, -negative on error
+
+::
+
+        struct kvm_sev_guest_status {
+                __u32 handle;   /* guest handle */
+                __u32 policy;   /* guest policy */
+                __u8 state;     /* guest state (see enum below) */
+        };
+
+SEV guest state:
+
+::
+
+        enum {
+        SEV_STATE_INVALID = 0;
+        SEV_STATE_LAUNCHING,    /* guest is currently being launched */
+        SEV_STATE_SECRET,       /* guest is being launched and ready to accept the ciphertext data */
+        SEV_STATE_RUNNING,      /* guest is fully launched and running */
+        SEV_STATE_RECEIVING,    /* guest is being migrated in from another SEV machine */
+        SEV_STATE_SENDING       /* guest is getting migrated out to another SEV machine */
+        };
+
+7. KVM_SEV_DBG_DECRYPT
+----------------------
+
+The KVM_SEV_DEBUG_DECRYPT command can be used by the hypervisor to request the
+firmware to decrypt the data at the given memory region.
+
+Parameters (in): struct kvm_sev_dbg
+
+Returns: 0 on success, -negative on error
+
+::
+
+        struct kvm_sev_dbg {
+                __u64 src_uaddr;        /* userspace address of data to decrypt */
+                __u64 dst_uaddr;        /* userspace address of destination */
+                __u32 len;              /* length of memory region to decrypt */
+        };
+
+The command returns an error if the guest policy does not allow debugging.
+
+8. KVM_SEV_DBG_ENCRYPT
+----------------------
+
+The KVM_SEV_DEBUG_ENCRYPT command can be used by the hypervisor to request the
+firmware to encrypt the data at the given memory region.
+
+Parameters (in): struct kvm_sev_dbg
+
+Returns: 0 on success, -negative on error
+
+::
+
+        struct kvm_sev_dbg {
+                __u64 src_uaddr;        /* userspace address of data to encrypt */
+                __u64 dst_uaddr;        /* userspace address of destination */
+                __u32 len;              /* length of memory region to encrypt */
+        };
+
+The command returns an error if the guest policy does not allow debugging.
+
+9. KVM_SEV_LAUNCH_SECRET
+------------------------
+
+The KVM_SEV_LAUNCH_SECRET command can be used by the hypervisor to inject secret
+data after the measurement has been validated by the guest owner.
+
+Parameters (in): struct kvm_sev_launch_secret
+
+Returns: 0 on success, -negative on error
+
+::
+
+        struct kvm_sev_launch_secret {
+                __u64 hdr_uaddr;        /* userspace address containing the packet header */
+                __u32 hdr_len;
+
+                __u64 guest_uaddr;      /* the guest memory region where the secret should be injected */
+                __u32 guest_len;
+
+                __u64 trans_uaddr;      /* the hypervisor memory region which contains the secret */
+                __u32 trans_len;
+        };
+
+10. KVM_SEV_GET_ATTESTATION_REPORT
+----------------------------------
+
+The KVM_SEV_GET_ATTESTATION_REPORT command can be used by the hypervisor to query the attestation
+report containing the SHA-256 digest of the guest memory and VMSA passed through the KVM_SEV_LAUNCH
+commands and signed with the PEK. The digest returned by the command should match the digest
+used by the guest owner with the KVM_SEV_LAUNCH_MEASURE.
+
+If len is zero on entry, the measurement blob length is written to len and
+uaddr is unused.
+
+Parameters (in): struct kvm_sev_attestation
+
+Returns: 0 on success, -negative on error
+
+::
+
+        struct kvm_sev_attestation_report {
+                __u8 mnonce[16];        /* A random mnonce that will be placed in the report */
+
+                __u64 uaddr;            /* userspace address where the report should be copied */
+                __u32 len;
+        };
+
+11. KVM_SEV_SEND_START
+----------------------
+
+The KVM_SEV_SEND_START command can be used by the hypervisor to create an
+outgoing guest encryption context.
+
+If session_len is zero on entry, the length of the guest session information is
+written to session_len and all other fields are not used.
+
+Parameters (in): struct kvm_sev_send_start
+
+Returns: 0 on success, -negative on error
+
+::
+
+        struct kvm_sev_send_start {
+                __u32 policy;                 /* guest policy */
+
+                __u64 pdh_cert_uaddr;         /* platform Diffie-Hellman certificate */
+                __u32 pdh_cert_len;
+
+                __u64 plat_certs_uaddr;        /* platform certificate chain */
+                __u32 plat_certs_len;
+
+                __u64 amd_certs_uaddr;        /* AMD certificate */
+                __u32 amd_certs_len;
+
+                __u64 session_uaddr;          /* Guest session information */
+                __u32 session_len;
+        };
+
+12. KVM_SEV_SEND_UPDATE_DATA
+----------------------------
+
+The KVM_SEV_SEND_UPDATE_DATA command can be used by the hypervisor to encrypt the
+outgoing guest memory region with the encryption context creating using
+KVM_SEV_SEND_START.
+
+If hdr_len or trans_len are zero on entry, the length of the packet header and
+transport region are written to hdr_len and trans_len respectively, and all
+other fields are not used.
+
+Parameters (in): struct kvm_sev_send_update_data
+
+Returns: 0 on success, -negative on error
+
+::
+
+        struct kvm_sev_launch_send_update_data {
+                __u64 hdr_uaddr;        /* userspace address containing the packet header */
+                __u32 hdr_len;
+
+                __u64 guest_uaddr;      /* the source memory region to be encrypted */
+                __u32 guest_len;
+
+                __u64 trans_uaddr;      /* the destination memory region  */
+                __u32 trans_len;
+        };
+
+13. KVM_SEV_SEND_FINISH
+------------------------
+
+After completion of the migration flow, the KVM_SEV_SEND_FINISH command can be
+issued by the hypervisor to delete the encryption context.
+
+Returns: 0 on success, -negative on error
+
+14. KVM_SEV_SEND_CANCEL
+------------------------
+
+After completion of SEND_START, but before SEND_FINISH, the source VMM can issue the
+SEND_CANCEL command to stop a migration. This is necessary so that a cancelled
+migration can restart with a new target later.
+
+Returns: 0 on success, -negative on error
+
+15. KVM_SEV_RECEIVE_START
+-------------------------
+
+The KVM_SEV_RECEIVE_START command is used for creating the memory encryption
+context for an incoming SEV guest. To create the encryption context, the user must
+provide a guest policy, the platform public Diffie-Hellman (PDH) key and session
+information.
+
+Parameters: struct  kvm_sev_receive_start (in/out)
+
+Returns: 0 on success, -negative on error
+
+::
+
+        struct kvm_sev_receive_start {
+                __u32 handle;           /* if zero then firmware creates a new handle */
+                __u32 policy;           /* guest's policy */
+
+                __u64 pdh_uaddr;        /* userspace address pointing to the PDH key */
+                __u32 pdh_len;
+
+                __u64 session_uaddr;    /* userspace address which points to the guest session information */
+                __u32 session_len;
+        };
+
+On success, the 'handle' field contains a new handle and on error, a negative value.
+
+For more details, see SEV spec Section 6.12.
+
+16. KVM_SEV_RECEIVE_UPDATE_DATA
+-------------------------------
+
+The KVM_SEV_RECEIVE_UPDATE_DATA command can be used by the hypervisor to copy
+the incoming buffers into the guest memory region with encryption context
+created during the KVM_SEV_RECEIVE_START.
+
+Parameters (in): struct kvm_sev_receive_update_data
+
+Returns: 0 on success, -negative on error
+
+::
+
+        struct kvm_sev_launch_receive_update_data {
+                __u64 hdr_uaddr;        /* userspace address containing the packet header */
+                __u32 hdr_len;
+
+                __u64 guest_uaddr;      /* the destination guest memory region */
+                __u32 guest_len;
+
+                __u64 trans_uaddr;      /* the incoming buffer memory region  */
+                __u32 trans_len;
+        };
+
+17. KVM_SEV_RECEIVE_FINISH
+--------------------------
+
+After completion of the migration flow, the KVM_SEV_RECEIVE_FINISH command can be
+issued by the hypervisor to make the guest ready for execution.
+
+Returns: 0 on success, -negative on error
+
+References
+==========
+
+
+See [white-paper]_, [api-spec]_, [amd-apm]_ and [kvm-forum]_ for more info.
+
+.. [white-paper] http://amd-dev.wpengine.netdna-cdn.com/wordpress/media/2013/12/AMD_Memory_Encryption_Whitepaper_v7-Public.pdf
+.. [api-spec] https://support.amd.com/TechDocs/55766_SEV-KM_API_Specification.pdf
+.. [amd-apm] https://support.amd.com/TechDocs/24593.pdf (section 15.34)
+.. [kvm-forum]  https://www.linux-kvm.org/images/7/74/02x08A-Thomas_Lendacky-AMDs_Virtualizatoin_Memory_Encryption_Technology.pdf