Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

31 files changed, 1786 insertions, 0 deletions

diff --git a/arch/arm/include/debug/8250.S b/arch/arm/include/debug/8250.S
new file mode 100644
index 000000000..e3692a37c
--- /dev/null
+++ b/arch/arm/include/debug/8250.S
@@ -0,0 +1,55 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * arch/arm/include/debug/8250.S
+ *
+ *  Copyright (C) 1994-2013 Russell King
+ */
+#include <linux/serial_reg.h>
+
+		.macro	addruart, rp, rv, tmp
+		ldr	\rp, =CONFIG_DEBUG_UART_PHYS
+		ldr	\rv, =CONFIG_DEBUG_UART_VIRT
+		.endm
+
+#ifdef CONFIG_DEBUG_UART_8250_WORD
+		.macro	store, rd, rx:vararg
+	 ARM_BE8(rev \rd, \rd)
+		str	\rd, \rx
+	 ARM_BE8(rev \rd, \rd)
+		.endm
+
+		.macro	load, rd, rx:vararg
+		ldr	\rd, \rx
+	ARM_BE8(rev \rd, \rd)
+		.endm
+#else
+		.macro	store, rd, rx:vararg
+		strb	\rd, \rx
+		.endm
+
+		.macro	load, rd, rx:vararg
+		ldrb	\rd, \rx
+		.endm
+#endif
+
+#define UART_SHIFT CONFIG_DEBUG_UART_8250_SHIFT
+
+		.macro	senduart,rd,rx
+		store	\rd, [\rx, #UART_TX << UART_SHIFT]
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		load	\rd, [\rx, #UART_LSR << UART_SHIFT]
+		and	\rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
+		teq	\rd, #UART_LSR_TEMT | UART_LSR_THRE
+		bne	1002b
+		.endm
+
+		.macro	waituarttxrdy,rd,rx
+		.endm
+
+		.macro	waituartcts,rd,rx
+1001:		load	\rd, [\rx, #UART_MSR << UART_SHIFT]
+		tst	\rd, #UART_MSR_CTS
+		beq	1001b
+		.endm
diff --git a/arch/arm/include/debug/asm9260.S b/arch/arm/include/debug/asm9260.S
new file mode 100644
index 000000000..5a0ce145c
--- /dev/null
+++ b/arch/arm/include/debug/asm9260.S
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *  Modified for ASM9260 by Oleksij Remepl <linux@rempel-privat.de>
+ */
+
+		.macro	addruart, rp, rv, tmp
+		ldr	\rp, = CONFIG_DEBUG_UART_PHYS
+		ldr	\rv, = CONFIG_DEBUG_UART_VIRT
+		.endm
+
+		.macro	waituarttxrdy,rd,rx
+		.endm
+
+		.macro	waituartcts,rd,rx
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #0x50]	@ TXDATA
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		ldr	\rd, [\rx, #0x60]	@ STAT
+		tst	\rd, #1 << 27		@ TXEMPTY
+		beq	1002b			@ wait until transmit done
+		.endm
diff --git a/arch/arm/include/debug/at91.S b/arch/arm/include/debug/at91.S
new file mode 100644
index 000000000..17722824e
--- /dev/null
+++ b/arch/arm/include/debug/at91.S
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ *  Copyright (C) 2003-2005 SAN People
+ *
+ * Debugging macro include header
+*/
+
+#define AT91_DBGU_SR		(0x14)	/* Status Register */
+#define AT91_DBGU_THR		(0x1c)	/* Transmitter Holding Register */
+#define AT91_DBGU_TXRDY		(1 << 1)	/* Transmitter Ready */
+#define AT91_DBGU_TXEMPTY	(1 << 9)	/* Transmitter Empty */
+
+	.macro	addruart, rp, rv, tmp
+	ldr	\rp, =CONFIG_DEBUG_UART_PHYS		@ System peripherals (phys address)
+	ldr	\rv, =CONFIG_DEBUG_UART_VIRT		@ System peripherals (virt address)
+	.endm
+
+	.macro	senduart,rd,rx
+	strb	\rd, [\rx, #(AT91_DBGU_THR)]		@ Write to Transmitter Holding Register
+	.endm
+
+	.macro	waituarttxrdy,rd,rx
+1001:	ldr	\rd, [\rx, #(AT91_DBGU_SR)]		@ Read Status Register
+	tst	\rd, #AT91_DBGU_TXRDY			@ DBGU_TXRDY = 1 when ready to transmit
+	beq	1001b
+	.endm
+
+	.macro	waituartcts,rd,rx
+	.endm
+
+	.macro	busyuart,rd,rx
+1001:	ldr	\rd, [\rx, #(AT91_DBGU_SR)]		@ Read Status Register
+	tst	\rd, #AT91_DBGU_TXEMPTY			@ DBGU_TXEMPTY = 1 when transmission complete
+	beq	1001b
+	.endm
+
diff --git a/arch/arm/include/debug/bcm63xx.S b/arch/arm/include/debug/bcm63xx.S
new file mode 100644
index 000000000..da65abb67
--- /dev/null
+++ b/arch/arm/include/debug/bcm63xx.S
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Broadcom BCM63xx low-level UART debug
+ *
+ * Copyright (C) 2014 Broadcom Corporation
+ */
+
+#include <linux/serial_bcm63xx.h>
+
+	.macro	addruart, rp, rv, tmp
+	ldr	\rp, =CONFIG_DEBUG_UART_PHYS
+	ldr	\rv, =CONFIG_DEBUG_UART_VIRT
+	.endm
+
+	.macro	senduart, rd, rx
+	/* word access do not work */
+	strb	\rd, [\rx, #UART_FIFO_REG]
+	.endm
+
+	.macro	waituarttxrdy, rd, rx
+1001:	ldr	\rd, [\rx, #UART_IR_REG]
+	tst	\rd, #(1 << UART_IR_TXEMPTY)
+	beq	1001b
+	.endm
+
+	.macro	waituartcts, rd, rx
+	.endm
+
+	.macro	busyuart, rd, rx
+1002:	ldr	\rd, [\rx, #UART_IR_REG]
+	tst	\rd, #(1 << UART_IR_TXTRESH)
+	beq	1002b
+	.endm
diff --git a/arch/arm/include/debug/brcmstb.S b/arch/arm/include/debug/brcmstb.S
new file mode 100644
index 000000000..f6175e6e2
--- /dev/null
+++ b/arch/arm/include/debug/brcmstb.S
@@ -0,0 +1,172 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright (C) 2016 Broadcom */
+#include <linux/serial_reg.h>
+#include <asm/cputype.h>
+
+/* Physical register offset and virtual register offset */
+#define REG_PHYS_BASE		0xf0000000
+#define REG_PHYS_BASE_V7	0x08000000
+#define REG_VIRT_BASE		0xfc000000
+#define REG_PHYS_ADDR(x)	((x) + REG_PHYS_BASE)
+#define REG_PHYS_ADDR_V7(x)	((x) + REG_PHYS_BASE_V7)
+
+/* Product id can be read from here */
+#define SUN_TOP_CTRL_BASE	REG_PHYS_ADDR(0x404000)
+#define SUN_TOP_CTRL_BASE_V7	REG_PHYS_ADDR_V7(0x404000)
+
+#define UARTA_3390		REG_PHYS_ADDR(0x40a900)
+#define UARTA_72116		UARTA_7255
+#define UARTA_7250		REG_PHYS_ADDR(0x40b400)
+#define UARTA_7255		REG_PHYS_ADDR(0x40c000)
+#define UARTA_7260		UARTA_7255
+#define UARTA_7268		UARTA_7255
+#define UARTA_7271		UARTA_7268
+#define UARTA_7278		REG_PHYS_ADDR_V7(0x40c000)
+#define UARTA_7216		UARTA_7278
+#define UARTA_72164		UARTA_7278
+#define UARTA_72165		UARTA_7278
+#define UARTA_7364		REG_PHYS_ADDR(0x40b000)
+#define UARTA_7366		UARTA_7364
+#define UARTA_74371		REG_PHYS_ADDR(0x406b00)
+#define UARTA_7439		REG_PHYS_ADDR(0x40a900)
+#define UARTA_7445		REG_PHYS_ADDR(0x40ab00)
+
+#define UART_SHIFT		2
+
+#define checkuart(rp, rv, family_id, family) \
+		/* Load family id */ \
+		ldr	rp, =family_id ; \
+		/* Compare SUN_TOP_CTRL value against it */ \
+		cmp	rp, rv ; \
+		/* Passed test, load address */ \
+		ldreq	rp, =UARTA_##family ; \
+		/* Jump to save UART address */ \
+		beq	91f
+
+		.macro  addruart, rp, rv, tmp
+		adr	\rp, 99f		@ actual addr of 99f
+		ldr	\rv, [\rp]		@ linked addr is stored there
+		sub	\rv, \rv, \rp		@ offset between the two
+		ldr	\rp, [\rp, #4]		@ linked brcmstb_uart_config
+		sub	\tmp, \rp, \rv		@ actual brcmstb_uart_config
+		ldr	\rp, [\tmp]		@ Load brcmstb_uart_config
+		cmp	\rp, #1			@ needs initialization?
+		bne	100f			@ no; go load the addresses
+		mov	\rv, #0			@ yes; record init is done
+		str	\rv, [\tmp]
+
+		/* Check for V7 memory map if B53 */
+		mrc	p15, 0, \rv, c0, c0, 0	@ get Main ID register
+		ldr	\rp, =ARM_CPU_PART_MASK
+		and	\rv, \rv, \rp
+		ldr	\rp, =ARM_CPU_PART_BRAHMA_B53	@ check for B53 CPU
+		cmp	\rv, \rp
+		bne	10f
+
+		/* if PERIPHBASE doesn't overlap REG_PHYS_BASE use V7 map */
+		mrc	p15, 1, \rv, c15, c3, 0	@ get PERIPHBASE from CBAR
+		ands	\rv, \rv, #REG_PHYS_BASE
+		ldreq	\rp, =SUN_TOP_CTRL_BASE_V7
+
+		/* Check SUN_TOP_CTRL base */
+10:		ldrne	\rp, =SUN_TOP_CTRL_BASE	@ load SUN_TOP_CTRL PA
+		ldr	\rv, [\rp, #0]		@ get register contents
+ARM_BE8(	rev	\rv, \rv )
+		and	\rv, \rv, #0xffffff00	@ strip revision bits [7:0]
+
+		/* Chip specific detection starts here */
+20:		checkuart(\rp, \rv, 0x33900000, 3390)
+21:		checkuart(\rp, \rv, 0x07211600, 72116)
+22:		checkuart(\rp, \rv, 0x72160000, 7216)
+23:		checkuart(\rp, \rv, 0x07216400, 72164)
+24:		checkuart(\rp, \rv, 0x07216500, 72165)
+25:		checkuart(\rp, \rv, 0x72500000, 7250)
+26:		checkuart(\rp, \rv, 0x72550000, 7255)
+27:		checkuart(\rp, \rv, 0x72600000, 7260)
+28:		checkuart(\rp, \rv, 0x72680000, 7268)
+29:		checkuart(\rp, \rv, 0x72710000, 7271)
+30:		checkuart(\rp, \rv, 0x72780000, 7278)
+31:		checkuart(\rp, \rv, 0x73640000, 7364)
+32:		checkuart(\rp, \rv, 0x73660000, 7366)
+33:		checkuart(\rp, \rv, 0x07437100, 74371)
+34:		checkuart(\rp, \rv, 0x74390000, 7439)
+35:		checkuart(\rp, \rv, 0x74450000, 7445)
+
+		/* No valid UART found */
+90:		mov	\rp, #0
+		/* fall through */
+
+		/* Record whichever UART we chose */
+91:		str	\rp, [\tmp, #4]		@ Store in brcmstb_uart_phys
+		cmp	\rp, #0			@ Valid UART address?
+		bne	92f			@ Yes, go process it
+		str	\rp, [\tmp, #8]		@ Store 0 in brcmstb_uart_virt
+		b	100f			@ Done
+92:		and     \rv, \rp, #0xffffff	@ offset within 16MB section
+		add	\rv, \rv, #REG_VIRT_BASE
+		str	\rv, [\tmp, #8]		@ Store in brcmstb_uart_virt
+		b	100f
+
+		.align
+99:		.word	.
+		.word	brcmstb_uart_config
+		.ltorg
+
+		/* Load previously selected UART address */
+100:		ldr	\rp, [\tmp, #4]		@ Load brcmstb_uart_phys
+		ldr	\rv, [\tmp, #8]		@ Load brcmstb_uart_virt
+		.endm
+
+		.macro	store, rd, rx:vararg
+ARM_BE8(	rev	\rd, \rd )
+		str	\rd, \rx
+		.endm
+
+		.macro	load, rd, rx:vararg
+		ldr	\rd, \rx
+ARM_BE8(	rev	\rd, \rd )
+		.endm
+
+		.macro	senduart,rd,rx
+		store	\rd, [\rx, #UART_TX << UART_SHIFT]
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		load	\rd, [\rx, #UART_LSR << UART_SHIFT]
+		and	\rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
+		teq	\rd, #UART_LSR_TEMT | UART_LSR_THRE
+		bne	1002b
+		.endm
+
+		.macro	waituarttxrdy,rd,rx
+		.endm
+
+		.macro	waituartcts,rd,rx
+		.endm
+
+/*
+ * Storage for the state maintained by the macros above.
+ *
+ * In the kernel proper, this data is located in arch/arm/mach-bcm/brcmstb.c.
+ * That's because this header is included from multiple files, and we only
+ * want a single copy of the data. In particular, the UART probing code above
+ * assumes it's running using physical addresses. This is true when this file
+ * is included from head.o, but not when included from debug.o. So we need
+ * to share the probe results between the two copies, rather than having
+ * to re-run the probing again later.
+ *
+ * In the decompressor, we put the symbol/storage right here, since common.c
+ * isn't included in the decompressor build. This symbol gets put in .text
+ * even though it's really data, since .data is discarded from the
+ * decompressor. Luckily, .text is writeable in the decompressor, unless
+ * CONFIG_ZBOOT_ROM. That dependency is handled in arch/arm/Kconfig.debug.
+ */
+#if defined(ZIMAGE)
+brcmstb_uart_config:
+	/* Debug UART initialization required */
+	.word 1
+	/* Debug UART physical address */
+	.word 0
+	/* Debug UART virtual address */
+	.word 0
+#endif
diff --git a/arch/arm/include/debug/clps711x.S b/arch/arm/include/debug/clps711x.S
new file mode 100644
index 000000000..a983d12a6
--- /dev/null
+++ b/arch/arm/include/debug/clps711x.S
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ */
+
+#ifndef CONFIG_DEBUG_CLPS711X_UART2
+#define CLPS711X_UART_PADDR	(0x80000000 + 0x0000)
+#define CLPS711X_UART_VADDR	(0xfeff4000 + 0x0000)
+#else
+#define CLPS711X_UART_PADDR	(0x80000000 + 0x1000)
+#define CLPS711X_UART_VADDR	(0xfeff4000 + 0x1000)
+#endif
+
+#define SYSFLG		(0x0140)
+#define SYSFLG_UBUSY	(1 << 11)
+#define UARTDR		(0x0480)
+
+	.macro	addruart, rp, rv, tmp
+	ldr	\rv, =CLPS711X_UART_VADDR
+	ldr	\rp, =CLPS711X_UART_PADDR
+	.endm
+
+	.macro	waituartcts,rd,rx
+	.endm
+
+	.macro	waituarttxrdy,rd,rx
+	.endm
+
+	.macro	senduart,rd,rx
+	str	\rd, [\rx, #UARTDR]
+	.endm
+
+	.macro	busyuart,rd,rx
+1001:	ldr	\rd, [\rx, #SYSFLG]
+	tst	\rd, #SYSFLG_UBUSY
+	bne	1001b
+	.endm
diff --git a/arch/arm/include/debug/dc21285.S b/arch/arm/include/debug/dc21285.S
new file mode 100644
index 000000000..4ec0e5e31
--- /dev/null
+++ b/arch/arm/include/debug/dc21285.S
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* arch/arm/mach-footbridge/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+*/
+
+#include <asm/hardware/dec21285.h>
+
+#include <mach/hardware.h>
+	/* For EBSA285 debugging */
+		.equ	dc21285_high, ARMCSR_BASE & 0xff000000
+		.equ	dc21285_low,  ARMCSR_BASE & 0x00ffffff
+
+		.macro	addruart, rp, rv, tmp
+		.if	dc21285_low
+		mov	\rp, #dc21285_low
+		.else
+		mov	\rp, #0
+		.endif
+		orr	\rv, \rp, #dc21285_high
+		orr	\rp, \rp, #0x42000000
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #0x160]	@ UARTDR
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldr	\rd, [\rx, #0x178]	@ UARTFLG
+		tst	\rd, #1 << 3
+		bne	1001b
+		.endm
+
+		.macro	waituartcts,rd,rx
+		.endm
+
+		.macro	waituarttxrdy,rd,rx
+		.endm
diff --git a/arch/arm/include/debug/digicolor.S b/arch/arm/include/debug/digicolor.S
new file mode 100644
index 000000000..443674cad
--- /dev/null
+++ b/arch/arm/include/debug/digicolor.S
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Debugging macro include header for Conexant Digicolor USART
+ *
+ * Copyright (C) 2014 Paradox Innovation Ltd.
+*/
+
+#define UA0_STATUS	0x0742
+#define UA0_EMI_REC	0x0744
+
+#define UA0_STATUS_TX_READY	0x40
+
+#ifdef CONFIG_DEBUG_UART_PHYS
+		.macro	addruart, rp, rv, tmp
+		ldr	\rp, =CONFIG_DEBUG_UART_PHYS
+		ldr	\rv, =CONFIG_DEBUG_UART_VIRT
+		.endm
+#endif
+
+		.macro	senduart,rd,rx
+		strb	\rd, [\rx, #UA0_EMI_REC]
+		.endm
+
+		.macro	waituartcts,rd,rx
+		.endm
+
+		.macro	waituarttxrdy,rd,rx
+		.endm
+
+	.macro	busyuart,rd,rx
+1001:		ldrb	\rd, [\rx, #UA0_STATUS]
+		tst	\rd, #UA0_STATUS_TX_READY
+		beq	1001b
+		.endm
diff --git a/arch/arm/include/debug/exynos.S b/arch/arm/include/debug/exynos.S
new file mode 100644
index 000000000..74b56769f
--- /dev/null
+++ b/arch/arm/include/debug/exynos.S
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/* pull in the relevant register and map files. */
+
+#define S3C_ADDR_BASE   0xF6000000
+#define S3C_VA_UART	S3C_ADDR_BASE + 0x01000000
+#define EXYNOS4_PA_UART	0x13800000
+#define EXYNOS5_PA_UART	0x12C00000
+
+	/* note, for the boot process to work we have to keep the UART
+	 * virtual address aligned to an 1MiB boundary for the L1
+	 * mapping the head code makes. We keep the UART virtual address
+	 * aligned and add in the offset when we load the value here.
+	 */
+
+	.macro addruart, rp, rv, tmp
+		mrc	p15, 0, \tmp, c0, c0, 0
+		and	\tmp, \tmp, #0xf0
+		teq	\tmp, #0xf0		@@ A15
+		beq	100f
+		mrc	p15, 0, \tmp, c0, c0, 5
+		and	\tmp, \tmp, #0xf00
+		teq	\tmp, #0x100		@@ A15 + A7 but boot to A7
+100:		ldreq	\rp, =EXYNOS5_PA_UART
+		movne	\rp, #EXYNOS4_PA_UART	@@ EXYNOS4
+		ldr	\rv, =S3C_VA_UART
+#if CONFIG_DEBUG_S3C_UART != 0
+		add	\rp, \rp, #(0x10000 * CONFIG_DEBUG_S3C_UART)
+		add	\rv, \rv, #(0x10000 * CONFIG_DEBUG_S3C_UART)
+#endif
+	.endm
+
+#define fifo_full fifo_full_s5pv210
+#define fifo_level fifo_level_s5pv210
+
+#include <debug/samsung.S>
diff --git a/arch/arm/include/debug/icedcc.S b/arch/arm/include/debug/icedcc.S
new file mode 100644
index 000000000..d5e65da8a
--- /dev/null
+++ b/arch/arm/include/debug/icedcc.S
@@ -0,0 +1,95 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ *  arch/arm/include/debug/icedcc.S
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ */
+
+		@@ debug using ARM EmbeddedICE DCC channel
+
+		.macro	addruart, rp, rv, tmp
+		.endm
+
+#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
+
+		.macro	senduart, rd, rx
+		mcr	p14, 0, \rd, c0, c5, 0
+		.endm
+
+		.macro	busyuart, rd, rx
+1001:
+		mrc	p14, 0, \rx, c0, c1, 0
+		tst	\rx, #0x20000000
+		beq	1001b
+		.endm
+
+		.macro	waituartcts, rd, rx
+		.endm
+
+		.macro	waituarttxrdy, rd, rx
+		mov	\rd, #0x2000000
+1001:
+		subs	\rd, \rd, #1
+		bmi	1002f
+		mrc	p14, 0, \rx, c0, c1, 0
+		tst	\rx, #0x20000000
+		bne	1001b
+1002:
+		.endm
+
+#elif defined(CONFIG_CPU_XSCALE)
+
+		.macro	senduart, rd, rx
+		mcr	p14, 0, \rd, c8, c0, 0
+		.endm
+
+		.macro	busyuart, rd, rx
+1001:
+		mrc	p14, 0, \rx, c14, c0, 0
+		tst	\rx, #0x10000000
+		beq	1001b
+		.endm
+
+		.macro	waituartcts, rd, rx
+		.endm
+
+		.macro	waituarttxrdy, rd, rx
+		mov	\rd, #0x10000000
+1001:
+		subs	\rd, \rd, #1
+		bmi	1002f
+		mrc	p14, 0, \rx, c14, c0, 0
+		tst	\rx, #0x10000000
+		bne	1001b
+1002:
+		.endm
+
+#else
+
+		.macro	senduart, rd, rx
+		mcr	p14, 0, \rd, c1, c0, 0
+		.endm
+
+		.macro	busyuart, rd, rx
+1001:
+		mrc	p14, 0, \rx, c0, c0, 0
+		tst	\rx, #2
+		beq	1001b
+
+		.endm
+
+		.macro	waituartcts, rd, rx
+		.endm
+
+		.macro	waituarttxrdy, rd, rx
+		mov	\rd, #0x2000000
+1001:
+		subs	\rd, \rd, #1
+		bmi	1002f
+		mrc	p14, 0, \rx, c0, c0, 0
+		tst	\rx, #2
+		bne	1001b
+1002:
+		.endm
+
+#endif	/* CONFIG_CPU_V6 */
diff --git a/arch/arm/include/debug/imx-uart.h b/arch/arm/include/debug/imx-uart.h
new file mode 100644
index 000000000..3edbb3c5b
--- /dev/null
+++ b/arch/arm/include/debug/imx-uart.h
@@ -0,0 +1,142 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012-2015 Freescale Semiconductor, Inc.
+ */
+
+#ifndef __DEBUG_IMX_UART_H
+#define __DEBUG_IMX_UART_H
+
+#define IMX1_UART1_BASE_ADDR	0x00206000
+#define IMX1_UART2_BASE_ADDR	0x00207000
+#define IMX1_UART_BASE_ADDR(n)	IMX1_UART##n##_BASE_ADDR
+#define IMX1_UART_BASE(n)	IMX1_UART_BASE_ADDR(n)
+
+#define IMX25_UART1_BASE_ADDR	0x43f90000
+#define IMX25_UART2_BASE_ADDR	0x43f94000
+#define IMX25_UART3_BASE_ADDR	0x5000c000
+#define IMX25_UART4_BASE_ADDR	0x50008000
+#define IMX25_UART5_BASE_ADDR	0x5002c000
+#define IMX25_UART_BASE_ADDR(n)	IMX25_UART##n##_BASE_ADDR
+#define IMX25_UART_BASE(n)	IMX25_UART_BASE_ADDR(n)
+
+#define IMX27_UART1_BASE_ADDR	0x1000a000
+#define IMX27_UART2_BASE_ADDR	0x1000b000
+#define IMX27_UART3_BASE_ADDR	0x1000c000
+#define IMX27_UART4_BASE_ADDR	0x1000d000
+#define IMX27_UART_BASE_ADDR(n)	IMX27_UART##n##_BASE_ADDR
+#define IMX27_UART_BASE(n)	IMX27_UART_BASE_ADDR(n)
+
+#define IMX31_UART1_BASE_ADDR	0x43f90000
+#define IMX31_UART2_BASE_ADDR	0x43f94000
+#define IMX31_UART3_BASE_ADDR	0x5000c000
+#define IMX31_UART4_BASE_ADDR	0x43fb0000
+#define IMX31_UART5_BASE_ADDR	0x43fb4000
+#define IMX31_UART_BASE_ADDR(n)	IMX31_UART##n##_BASE_ADDR
+#define IMX31_UART_BASE(n)	IMX31_UART_BASE_ADDR(n)
+
+#define IMX35_UART1_BASE_ADDR	0x43f90000
+#define IMX35_UART2_BASE_ADDR	0x43f94000
+#define IMX35_UART3_BASE_ADDR	0x5000c000
+#define IMX35_UART_BASE_ADDR(n)	IMX35_UART##n##_BASE_ADDR
+#define IMX35_UART_BASE(n)	IMX35_UART_BASE_ADDR(n)
+
+#define IMX50_UART1_BASE_ADDR	0x53fbc000
+#define IMX50_UART2_BASE_ADDR	0x53fc0000
+#define IMX50_UART3_BASE_ADDR	0x5000c000
+#define IMX50_UART4_BASE_ADDR	0x53ff0000
+#define IMX50_UART5_BASE_ADDR	0x63f90000
+#define IMX50_UART_BASE_ADDR(n)	IMX50_UART##n##_BASE_ADDR
+#define IMX50_UART_BASE(n)	IMX50_UART_BASE_ADDR(n)
+
+#define IMX51_UART1_BASE_ADDR	0x73fbc000
+#define IMX51_UART2_BASE_ADDR	0x73fc0000
+#define IMX51_UART3_BASE_ADDR	0x7000c000
+#define IMX51_UART_BASE_ADDR(n)	IMX51_UART##n##_BASE_ADDR
+#define IMX51_UART_BASE(n)	IMX51_UART_BASE_ADDR(n)
+
+#define IMX53_UART1_BASE_ADDR	0x53fbc000
+#define IMX53_UART2_BASE_ADDR	0x53fc0000
+#define IMX53_UART3_BASE_ADDR	0x5000c000
+#define IMX53_UART4_BASE_ADDR	0x53ff0000
+#define IMX53_UART5_BASE_ADDR	0x63f90000
+#define IMX53_UART_BASE_ADDR(n)	IMX53_UART##n##_BASE_ADDR
+#define IMX53_UART_BASE(n)	IMX53_UART_BASE_ADDR(n)
+
+#define IMX6Q_UART1_BASE_ADDR	0x02020000
+#define IMX6Q_UART2_BASE_ADDR	0x021e8000
+#define IMX6Q_UART3_BASE_ADDR	0x021ec000
+#define IMX6Q_UART4_BASE_ADDR	0x021f0000
+#define IMX6Q_UART5_BASE_ADDR	0x021f4000
+#define IMX6Q_UART_BASE_ADDR(n)	IMX6Q_UART##n##_BASE_ADDR
+#define IMX6Q_UART_BASE(n)	IMX6Q_UART_BASE_ADDR(n)
+
+#define IMX6SL_UART1_BASE_ADDR	0x02020000
+#define IMX6SL_UART2_BASE_ADDR	0x02024000
+#define IMX6SL_UART3_BASE_ADDR	0x02034000
+#define IMX6SL_UART4_BASE_ADDR	0x02038000
+#define IMX6SL_UART5_BASE_ADDR	0x02018000
+#define IMX6SL_UART_BASE_ADDR(n) IMX6SL_UART##n##_BASE_ADDR
+#define IMX6SL_UART_BASE(n)	IMX6SL_UART_BASE_ADDR(n)
+
+#define IMX6SX_UART1_BASE_ADDR	0x02020000
+#define IMX6SX_UART2_BASE_ADDR	0x021e8000
+#define IMX6SX_UART3_BASE_ADDR	0x021ec000
+#define IMX6SX_UART4_BASE_ADDR	0x021f0000
+#define IMX6SX_UART5_BASE_ADDR	0x021f4000
+#define IMX6SX_UART6_BASE_ADDR	0x022a0000
+#define IMX6SX_UART_BASE_ADDR(n) IMX6SX_UART##n##_BASE_ADDR
+#define IMX6SX_UART_BASE(n)	IMX6SX_UART_BASE_ADDR(n)
+
+#define IMX6UL_UART1_BASE_ADDR	0x02020000
+#define IMX6UL_UART2_BASE_ADDR	0x021e8000
+#define IMX6UL_UART3_BASE_ADDR	0x021ec000
+#define IMX6UL_UART4_BASE_ADDR	0x021f0000
+#define IMX6UL_UART5_BASE_ADDR	0x021f4000
+#define IMX6UL_UART6_BASE_ADDR	0x021fc000
+#define IMX6UL_UART7_BASE_ADDR	0x02018000
+#define IMX6UL_UART8_BASE_ADDR	0x02024000
+#define IMX6UL_UART_BASE_ADDR(n) IMX6UL_UART##n##_BASE_ADDR
+#define IMX6UL_UART_BASE(n)	IMX6UL_UART_BASE_ADDR(n)
+
+#define IMX7D_UART1_BASE_ADDR	0x30860000
+#define IMX7D_UART2_BASE_ADDR	0x30890000
+#define IMX7D_UART3_BASE_ADDR	0x30880000
+#define IMX7D_UART4_BASE_ADDR	0x30a60000
+#define IMX7D_UART5_BASE_ADDR	0x30a70000
+#define IMX7D_UART6_BASE_ADDR	0x30a80000
+#define IMX7D_UART7_BASE_ADDR	0x30a90000
+#define IMX7D_UART_BASE_ADDR(n) IMX7D_UART##n##_BASE_ADDR
+#define IMX7D_UART_BASE(n)	IMX7D_UART_BASE_ADDR(n)
+
+#define IMX_DEBUG_UART_BASE(soc) soc##_UART_BASE(CONFIG_DEBUG_IMX_UART_PORT)
+
+#ifdef CONFIG_DEBUG_IMX1_UART
+#define UART_PADDR	IMX_DEBUG_UART_BASE(IMX1)
+#elif defined(CONFIG_DEBUG_IMX25_UART)
+#define UART_PADDR	IMX_DEBUG_UART_BASE(IMX25)
+#elif defined(CONFIG_DEBUG_IMX27_UART)
+#define UART_PADDR	IMX_DEBUG_UART_BASE(IMX27)
+#elif defined(CONFIG_DEBUG_IMX31_UART)
+#define UART_PADDR	IMX_DEBUG_UART_BASE(IMX31)
+#elif defined(CONFIG_DEBUG_IMX35_UART)
+#define UART_PADDR	IMX_DEBUG_UART_BASE(IMX35)
+#elif defined(CONFIG_DEBUG_IMX50_UART)
+#define UART_PADDR	IMX_DEBUG_UART_BASE(IMX50)
+#elif defined(CONFIG_DEBUG_IMX51_UART)
+#define UART_PADDR	IMX_DEBUG_UART_BASE(IMX51)
+#elif defined(CONFIG_DEBUG_IMX53_UART)
+#define UART_PADDR	IMX_DEBUG_UART_BASE(IMX53)
+#elif defined(CONFIG_DEBUG_IMX6Q_UART)
+#define UART_PADDR	IMX_DEBUG_UART_BASE(IMX6Q)
+#elif defined(CONFIG_DEBUG_IMX6SL_UART)
+#define UART_PADDR	IMX_DEBUG_UART_BASE(IMX6SL)
+#elif defined(CONFIG_DEBUG_IMX6SX_UART)
+#define UART_PADDR	IMX_DEBUG_UART_BASE(IMX6SX)
+#elif defined(CONFIG_DEBUG_IMX6UL_UART)
+#define UART_PADDR	IMX_DEBUG_UART_BASE(IMX6UL)
+#elif defined(CONFIG_DEBUG_IMX7D_UART)
+#define UART_PADDR	IMX_DEBUG_UART_BASE(IMX7D)
+
+#endif
+
+#endif /* __DEBUG_IMX_UART_H */
diff --git a/arch/arm/include/debug/imx.S b/arch/arm/include/debug/imx.S
new file mode 100644
index 000000000..bb7b95505
--- /dev/null
+++ b/arch/arm/include/debug/imx.S
@@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* arch/arm/mach-imx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ */
+
+#include <asm/assembler.h>
+#include "imx-uart.h"
+
+/*
+ * FIXME: This is a copy of IMX_IO_P2V in hardware.h, and needs to
+ * stay sync with that.  It's hard to maintain, and should be fixed
+ * globally for multi-platform build to use a fixed virtual address
+ * for low-level debug uart port across platforms.
+ */
+#define IMX_IO_P2V(x)	(						\
+			(((x) & 0x80000000) >> 7) |			\
+			(0xf4000000 +					\
+			(((x) & 0x50000000) >> 6) +			\
+			(((x) & 0x0b000000) >> 4) +			\
+			(((x) & 0x000fffff))))
+
+#define UART_VADDR	IMX_IO_P2V(UART_PADDR)
+
+		.macro	addruart, rp, rv, tmp
+		ldr	\rp, =UART_PADDR	@ physical
+		ldr	\rv, =UART_VADDR	@ virtual
+		.endm
+
+		.macro	senduart,rd,rx
+		ARM_BE8(rev \rd, \rd)
+		str	\rd, [\rx, #0x40]	@ TXDATA
+		.endm
+
+		.macro	waituartcts,rd,rx
+		.endm
+
+		.macro	waituarttxrdy,rd,rx
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		ldr	\rd, [\rx, #0x98]	@ SR2
+		ARM_BE8(rev \rd, \rd)
+		tst	\rd, #1 << 3		@ TXDC
+		beq	1002b			@ wait until transmit done
+		.endm
diff --git a/arch/arm/include/debug/meson.S b/arch/arm/include/debug/meson.S
new file mode 100644
index 000000000..7b60e4401
--- /dev/null
+++ b/arch/arm/include/debug/meson.S
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2014 Carlo Caione
+ * Carlo Caione <carlo@caione.org>
+ */
+
+#define MESON_AO_UART_WFIFO		0x0
+#define MESON_AO_UART_STATUS		0xc
+
+#define MESON_AO_UART_TX_FIFO_EMPTY	(1 << 22)
+#define MESON_AO_UART_TX_FIFO_FULL	(1 << 21)
+
+	.macro	addruart, rp, rv, tmp
+	ldr	\rp, =(CONFIG_DEBUG_UART_PHYS)		@ physical
+	ldr	\rv, =(CONFIG_DEBUG_UART_VIRT)		@ virtual
+	.endm
+
+	.macro	senduart,rd,rx
+	str	\rd, [\rx, #MESON_AO_UART_WFIFO]
+	.endm
+
+	.macro	busyuart,rd,rx
+1002:	ldr	\rd, [\rx, #MESON_AO_UART_STATUS]
+	tst	\rd, #MESON_AO_UART_TX_FIFO_EMPTY
+	beq	1002b
+	.endm
+
+	.macro	waituartcts,rd,rx
+	.endm
+
+	.macro	waituarttxrdy,rd,rx
+1001:	ldr	\rd, [\rx, #MESON_AO_UART_STATUS]
+	tst	\rd, #MESON_AO_UART_TX_FIFO_FULL
+	bne	1001b
+	.endm
diff --git a/arch/arm/include/debug/msm.S b/arch/arm/include/debug/msm.S
new file mode 100644
index 000000000..530edc74f
--- /dev/null
+++ b/arch/arm/include/debug/msm.S
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
+ * Author: Brian Swetland <swetland@google.com>
+ */
+
+	.macro	addruart, rp, rv, tmp
+	ldr	\rp, =CONFIG_DEBUG_UART_PHYS
+	ldr	\rv, =CONFIG_DEBUG_UART_VIRT
+	.endm
+
+	.macro	senduart, rd, rx
+ARM_BE8(rev	\rd, \rd )
+	@ Write the 1 character to UARTDM_TF
+	str	\rd, [\rx, #0x70]
+	.endm
+
+	.macro	waituartcts,rd,rx
+	.endm
+
+	.macro	waituarttxrdy, rd, rx
+	@ check for TX_EMT in UARTDM_SR
+	ldr	\rd, [\rx, #0x08]
+ARM_BE8(rev     \rd, \rd )
+	tst	\rd, #0x08
+	bne	1002f
+	@ wait for TXREADY in UARTDM_ISR
+1001:	ldr	\rd, [\rx, #0x14]
+ARM_BE8(rev     \rd, \rd )
+	tst	\rd, #0x80
+	beq 	1001b
+1002:
+	@ Clear TX_READY by writing to the UARTDM_CR register
+	mov	\rd, #0x300
+ARM_BE8(rev     \rd, \rd )
+	str	\rd, [\rx, #0x10]
+	@ Write 0x1 to NCF register
+	mov 	\rd, #0x1
+ARM_BE8(rev     \rd, \rd )
+	str	\rd, [\rx, #0x40]
+	@ UARTDM reg. Read to induce delay
+	ldr	\rd, [\rx, #0x08]
+	.endm
+
+	.macro	busyuart, rd, rx
+	.endm
diff --git a/arch/arm/include/debug/omap2plus.S b/arch/arm/include/debug/omap2plus.S
new file mode 100644
index 000000000..0680be6c7
--- /dev/null
+++ b/arch/arm/include/debug/omap2plus.S
@@ -0,0 +1,82 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+*/
+
+#include <linux/serial_reg.h>
+
+/* External port on Zoom2/3 */
+#define ZOOM_UART_BASE		0x10000000
+#define ZOOM_UART_VIRT		0xfa400000
+
+#define OMAP_PORT_SHIFT		2
+#define ZOOM_PORT_SHIFT		1
+
+#define UART_OFFSET(addr)	((addr) & 0x00ffffff)
+
+		.pushsection .data
+		.align	2
+omap_uart_phys:	.word	0
+omap_uart_virt:	.word	0
+omap_uart_lsr:	.word	0
+		.popsection
+
+		.macro	addruart, rp, rv, tmp
+
+		/* Use omap_uart_phys/virt if already configured */
+10:		adr	\rp, 99f		@ get effective addr of 99f
+		ldr	\rv, [\rp]		@ get absolute addr of 99f
+		sub	\rv, \rv, \rp		@ offset between the two
+		ldr	\rp, [\rp, #4]		@ abs addr of omap_uart_phys
+		sub	\tmp, \rp, \rv		@ make it effective
+		ldr	\rp, [\tmp, #0]		@ omap_uart_phys
+		ldr	\rv, [\tmp, #4]		@ omap_uart_virt
+		cmp	\rp, #0			@ is port configured?
+		cmpne	\rv, #0
+		bne	100f			@ already configured
+
+		/* Configure the UART offset from the phys/virt base */
+#ifdef CONFIG_DEBUG_ZOOM_UART
+		ldr	\rp, =ZOOM_UART_BASE
+		str	\rp, [\tmp, #0]		@ omap_uart_phys
+		ldr	\rp, =ZOOM_UART_VIRT
+		str	\rp, [\tmp, #4]		@ omap_uart_virt
+		mov	\rp, #(UART_LSR << ZOOM_PORT_SHIFT)
+		str	\rp, [\tmp, #8]		@ omap_uart_lsr
+#endif
+		b	10b
+
+		.align
+99:		.word	.
+		.word	omap_uart_phys
+		.ltorg
+
+100:		/* Pass the UART_LSR reg address */
+		ldr	\tmp, [\tmp, #8]	@ omap_uart_lsr
+		add	\rp, \rp, \tmp
+		add	\rv, \rv, \tmp
+		.endm
+
+		.macro	senduart,rd,rx
+		orr	\rd, \rd, \rx, lsl #24	@ preserve LSR reg offset
+		bic	\rx, \rx, #0xff		@ get base (THR) reg address
+		strb	\rd, [\rx]		@ send lower byte of rd
+		orr	\rx, \rx, \rd, lsr #24	@ restore original rx (LSR)
+		bic	\rd, \rd, #(0xff << 24)	@ restore original rd
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldrb	\rd, [\rx]		@ rx contains UART_LSR address
+		and	\rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
+		teq	\rd, #(UART_LSR_TEMT | UART_LSR_THRE)
+		bne	1001b
+		.endm
+
+		.macro	waituartcts,rd,rx
+		.endm
+
+		.macro	waituarttxrdy,rd,rx
+		.endm
diff --git a/arch/arm/include/debug/palmchip.S b/arch/arm/include/debug/palmchip.S
new file mode 100644
index 000000000..aed59332e
--- /dev/null
+++ b/arch/arm/include/debug/palmchip.S
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <linux/serial_reg.h>
+
+#undef UART_TX
+#undef UART_LSR
+#undef UART_MSR
+
+#define UART_TX 1
+#define UART_LSR 7
+#define UART_MSR 8
+
+#include <debug/8250.S>
diff --git a/arch/arm/include/debug/pl01x.S b/arch/arm/include/debug/pl01x.S
new file mode 100644
index 000000000..c7e02d062
--- /dev/null
+++ b/arch/arm/include/debug/pl01x.S
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* arch/arm/include/debug/pl01x.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+*/
+#include <linux/amba/serial.h>
+
+#ifdef CONFIG_DEBUG_UART_PHYS
+		.macro	addruart, rp, rv, tmp
+		ldr	\rp, =CONFIG_DEBUG_UART_PHYS
+		ldr	\rv, =CONFIG_DEBUG_UART_VIRT
+		.endm
+#endif
+
+		.macro	senduart,rd,rx
+		strb	\rd, [\rx, #UART01x_DR]
+		.endm
+
+		.macro	waituartcts,rd,rx
+		.endm
+
+		.macro	waituarttxrdy,rd,rx
+1001:		ldr	\rd, [\rx, #UART01x_FR]
+ ARM_BE8(	rev	\rd, \rd )
+		tst	\rd, #UART01x_FR_TXFF
+		bne	1001b
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldr	\rd, [\rx, #UART01x_FR]
+ ARM_BE8(	rev	\rd, \rd )
+		tst	\rd, #UART01x_FR_BUSY
+		bne	1001b
+		.endm
diff --git a/arch/arm/include/debug/renesas-scif.S b/arch/arm/include/debug/renesas-scif.S
new file mode 100644
index 000000000..8e433e981
--- /dev/null
+++ b/arch/arm/include/debug/renesas-scif.S
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Renesas SCIF(A) debugging macro include header
+ *
+ * Based on r8a7790.S
+ *
+ * Copyright (C) 2012-2013 Renesas Electronics Corporation
+ * Copyright (C) 1994-1999 Russell King
+ */
+
+#define SCIF_PHYS	CONFIG_DEBUG_UART_PHYS
+#define SCIF_VIRT	((SCIF_PHYS & 0x00ffffff) | 0xfd000000)
+
+#if defined(CONFIG_DEBUG_R7S9210_SCIF2) || defined(CONFIG_DEBUG_R7S9210_SCIF4)
+/* RZ/A2 SCIFA */
+#define FTDR		0x06
+#define FSR		0x08
+#elif CONFIG_DEBUG_UART_PHYS < 0xe6e00000
+/* SCIFA */
+#define FTDR		0x20
+#define FSR		0x14
+#else
+/* SCIF */
+#define FTDR		0x0c
+#define FSR		0x10
+#endif
+
+#define TDFE	(1 << 5)
+#define TEND	(1 << 6)
+
+	.macro	addruart, rp, rv, tmp
+	ldr	\rp, =SCIF_PHYS
+	ldr	\rv, =SCIF_VIRT
+	.endm
+
+	.macro	waituartcts,rd,rx
+	.endm
+
+	.macro	waituarttxrdy, rd, rx
+1001:	ldrh	\rd, [\rx, #FSR]
+	tst	\rd, #TDFE
+	beq	1001b
+	.endm
+
+	.macro	senduart, rd, rx
+	strb	\rd, [\rx, #FTDR]
+	ldrh	\rd, [\rx, #FSR]
+	bic	\rd, \rd, #TEND
+	strh	\rd, [\rx, #FSR]
+	.endm
+
+	.macro	busyuart, rd, rx
+1001:	ldrh	\rd, [\rx, #FSR]
+	tst	\rd, #TEND
+	beq	1001b
+	.endm
diff --git a/arch/arm/include/debug/s3c24xx.S b/arch/arm/include/debug/s3c24xx.S
new file mode 100644
index 000000000..af873b526
--- /dev/null
+++ b/arch/arm/include/debug/s3c24xx.S
@@ -0,0 +1,43 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* arch/arm/mach-s3c2410/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Copyright (C) 2005 Simtec Electronics
+ *
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+*/
+
+#include <linux/serial_s3c.h>
+
+#define S3C2410_UART1_OFF (0x4000)
+
+	.macro addruart, rp, rv, tmp
+		ldr	\rp, = CONFIG_DEBUG_UART_PHYS
+		ldr	\rv, = CONFIG_DEBUG_UART_VIRT
+	.endm
+
+	.macro  fifo_full_s3c2410 rd, rx
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
+		tst	\rd, #S3C2410_UFSTAT_TXFULL
+	.endm
+
+	.macro fifo_level_s3c2410 rd, rx
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
+		and	\rd, \rd, #S3C2410_UFSTAT_TXMASK
+	.endm
+
+/* Select the correct implementation depending on the configuration. The
+ * S3C2440 will get selected by default, as these are the most widely
+ * used variants of these
+*/
+
+#if defined(CONFIG_DEBUG_S3C2410_UART)
+#define fifo_full  fifo_full_s3c2410
+#define fifo_level fifo_level_s3c2410
+#endif
+
+/* include the reset of the code which will do the work */
+
+#include <debug/samsung.S>
diff --git a/arch/arm/include/debug/s5pv210.S b/arch/arm/include/debug/s5pv210.S
new file mode 100644
index 000000000..820a1cfb0
--- /dev/null
+++ b/arch/arm/include/debug/s5pv210.S
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+*/
+
+/* pull in the relevant register and map files. */
+
+#define S3C_ADDR_BASE   0xF6000000
+#define S3C_VA_UART	S3C_ADDR_BASE + 0x01000000
+#define S5PV210_PA_UART	0xe2900000
+
+	/* note, for the boot process to work we have to keep the UART
+	 * virtual address aligned to an 1MiB boundary for the L1
+	 * mapping the head code makes. We keep the UART virtual address
+	 * aligned and add in the offset when we load the value here.
+	 */
+
+	.macro addruart, rp, rv, tmp
+		ldr	\rp, =S5PV210_PA_UART
+		ldr	\rv, =S3C_VA_UART
+#if CONFIG_DEBUG_S3C_UART != 0
+		add	\rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART)
+		add	\rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART)
+#endif
+	.endm
+
+#define fifo_full fifo_full_s5pv210
+#define fifo_level fifo_level_s5pv210
+
+#include <debug/samsung.S>
diff --git a/arch/arm/include/debug/sa1100.S b/arch/arm/include/debug/sa1100.S
new file mode 100644
index 000000000..7968ea52d
--- /dev/null
+++ b/arch/arm/include/debug/sa1100.S
@@ -0,0 +1,67 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* arch/arm/include/debug/sa1100.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+*/
+
+#define UTCR3		0x0c
+#define UTDR		0x14
+#define UTSR1		0x20
+#define UTCR3_TXE	0x00000002	/* Transmit Enable                 */
+#define UTSR1_TBY	0x00000001	/* Transmitter BusY (read)         */
+#define UTSR1_TNF	0x00000004	/* Transmit FIFO Not Full (read)   */
+
+		.macro	addruart, rp, rv, tmp
+		mrc	p15, 0, \rp, c1, c0
+		tst	\rp, #1			@ MMU enabled?
+		moveq	\rp, #0x80000000	@ physical base address
+		movne	\rp, #0xf8000000	@ virtual address
+
+		@ We probe for the active serial port here, coherently with
+		@ the comment in arch/arm/mach-sa1100/include/mach/uncompress.h.
+		@ We assume r1 can be clobbered.
+
+		@ see if Ser3 is active
+		add	\rp, \rp, #0x00050000
+		ldr	\rv, [\rp, #UTCR3]
+		tst	\rv, #UTCR3_TXE
+
+		@ if Ser3 is inactive, then try Ser1
+		addeq	\rp, \rp, #(0x00010000 - 0x00050000)
+		ldreq	\rv, [\rp, #UTCR3]
+		tsteq	\rv, #UTCR3_TXE
+
+		@ if Ser1 is inactive, then try Ser2
+		addeq	\rp, \rp, #(0x00030000 - 0x00010000)
+		ldreq	\rv, [\rp, #UTCR3]
+		tsteq	\rv, #UTCR3_TXE
+
+		@ clear top bits, and generate both phys and virt addresses
+		lsl	\rp, \rp, #8
+		lsr	\rp, \rp, #8
+		orr	\rv, \rp, #0xf8000000	@ virtual
+		orr	\rp, \rp, #0x80000000	@ physical
+
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #UTDR]
+		.endm
+
+		.macro	waituartcts,rd,rx
+		.endm
+
+		.macro	waituarttxrdy,rd,rx
+1001:		ldr	\rd, [\rx, #UTSR1]
+		tst	\rd, #UTSR1_TNF
+		beq	1001b
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldr	\rd, [\rx, #UTSR1]
+		tst	\rd, #UTSR1_TBY
+		bne	1001b
+		.endm
diff --git a/arch/arm/include/debug/samsung.S b/arch/arm/include/debug/samsung.S
new file mode 100644
index 000000000..ab474d564
--- /dev/null
+++ b/arch/arm/include/debug/samsung.S
@@ -0,0 +1,94 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2005, 2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ */
+
+#include <linux/serial_s3c.h>
+
+/* The S5PV210/S5PC110 implementations are as belows. */
+
+	.macro fifo_level_s5pv210 rd, rx
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
+ARM_BE8(rev \rd, \rd)
+		and	\rd, \rd, #S5PV210_UFSTAT_TXMASK
+	.endm
+
+	.macro  fifo_full_s5pv210 rd, rx
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
+ARM_BE8(rev \rd, \rd)
+		tst	\rd, #S5PV210_UFSTAT_TXFULL
+	.endm
+
+/* The S3C2440 implementations are used by default as they are the
+ * most widely re-used */
+
+	.macro fifo_level_s3c2440 rd, rx
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
+ARM_BE8(rev \rd, \rd)
+		and	\rd, \rd, #S3C2440_UFSTAT_TXMASK
+	.endm
+
+#ifndef fifo_level
+#define fifo_level fifo_level_s3c2440
+#endif
+
+	.macro  fifo_full_s3c2440 rd, rx
+		ldr	\rd, [\rx, # S3C2410_UFSTAT]
+ARM_BE8(rev \rd, \rd)
+		tst	\rd, #S3C2440_UFSTAT_TXFULL
+	.endm
+
+#ifndef fifo_full
+#define fifo_full fifo_full_s3c2440
+#endif
+
+	.macro	senduart,rd,rx
+		strb 	\rd, [\rx, # S3C2410_UTXH]
+	.endm
+
+	.macro	busyuart, rd, rx
+		ldr	\rd, [\rx, # S3C2410_UFCON]
+ARM_BE8(rev \rd, \rd)
+		tst	\rd, #S3C2410_UFCON_FIFOMODE	@ fifo enabled?
+		beq	1001f				@
+		@ FIFO enabled...
+1003:
+		fifo_full \rd, \rx
+		bne	1003b
+		b	1002f
+
+1001:
+		@ busy waiting for non fifo
+		ldr	\rd, [\rx, # S3C2410_UTRSTAT]
+ARM_BE8(rev \rd, \rd)
+		tst	\rd, #S3C2410_UTRSTAT_TXFE
+		beq	1001b
+
+1002:		@ exit busyuart
+	.endm
+
+	.macro	waituartcts,rd,rx
+	.endm
+
+	.macro	waituarttxrdy,rd,rx
+		ldr	\rd, [\rx, # S3C2410_UFCON]
+ARM_BE8(rev \rd, \rd)
+		tst	\rd, #S3C2410_UFCON_FIFOMODE	@ fifo enabled?
+		beq	1001f				@
+		@ FIFO enabled...
+1003:
+		fifo_level \rd, \rx
+		teq	\rd, #0
+		bne	1003b
+		b	1002f
+1001:
+		@ idle waiting for non fifo
+		ldr	\rd, [\rx, # S3C2410_UTRSTAT]
+ARM_BE8(rev \rd, \rd)
+		tst	\rd, #S3C2410_UTRSTAT_TXFE
+		beq	1001b
+
+1002:		@ exit busyuart
+	.endm
diff --git a/arch/arm/include/debug/sti.S b/arch/arm/include/debug/sti.S
new file mode 100644
index 000000000..dc796ac2a
--- /dev/null
+++ b/arch/arm/include/debug/sti.S
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * arch/arm/include/debug/sti.S
+ *
+ * Debugging macro include header
+ * Copyright (C) 2013 STMicroelectronics (R&D) Limited.
+ */
+
+#define ASC_TX_BUF_OFF  0x04
+#define ASC_CTRL_OFF    0x0c
+#define ASC_STA_OFF     0x14
+
+#define ASC_STA_TX_FULL         (1<<9)
+#define ASC_STA_TX_EMPTY        (1<<1)
+
+
+		.macro	addruart, rp, rv, tmp
+		ldr	\rp,      =CONFIG_DEBUG_UART_PHYS	@ physical base
+		ldr	\rv,      =CONFIG_DEBUG_UART_VIRT	@ virt base
+		.endm
+
+                .macro  senduart,rd,rx
+                strb    \rd, [\rx, #ASC_TX_BUF_OFF]
+                .endm
+
+		.macro	waituartcts,rd,rx
+		.endm
+
+                .macro  waituarttxrdy,rd,rx
+1001:           ldr     \rd, [\rx, #ASC_STA_OFF]
+                tst     \rd, #ASC_STA_TX_FULL
+                bne     1001b
+                .endm
+
+                .macro  busyuart,rd,rx
+1001:           ldr     \rd, [\rx, #ASC_STA_OFF]
+                tst     \rd, #ASC_STA_TX_EMPTY
+                beq     1001b
+                .endm
diff --git a/arch/arm/include/debug/stm32.S b/arch/arm/include/debug/stm32.S
new file mode 100644
index 000000000..b6d9df30e
--- /dev/null
+++ b/arch/arm/include/debug/stm32.S
@@ -0,0 +1,43 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) STMicroelectronics SA 2017 - All Rights Reserved
+ * Author:   Gerald Baeza <gerald.baeza@st.com> for STMicroelectronics.
+ */
+
+#ifdef CONFIG_STM32F4_DEBUG_UART
+#define STM32_USART_SR_OFF		0x00
+#define STM32_USART_TDR_OFF		0x04
+#endif
+
+#if defined(CONFIG_STM32F7_DEBUG_UART) || defined(CONFIG_STM32H7_DEBUG_UART) || \
+	defined(CONFIG_STM32MP1_DEBUG_UART)
+#define STM32_USART_SR_OFF		0x1C
+#define STM32_USART_TDR_OFF		0x28
+#endif
+
+#define STM32_USART_TC			(1 << 6)	/* Tx complete       */
+#define STM32_USART_TXE			(1 << 7)	/* Tx data reg empty */
+
+.macro	addruart, rp, rv, tmp
+	ldr	\rp, =CONFIG_DEBUG_UART_PHYS @ physical base
+	ldr	\rv, =CONFIG_DEBUG_UART_VIRT @ virt base
+.endm
+
+.macro  senduart,rd,rx
+	strb    \rd, [\rx, #STM32_USART_TDR_OFF]
+.endm
+
+.macro	waituartcts,rd,rx
+.endm
+
+.macro  waituarttxrdy,rd,rx
+1001:	ldr	\rd, [\rx, #(STM32_USART_SR_OFF)]	@ Read Status Register
+	tst	\rd, #STM32_USART_TXE			@ TXE = 1 = tx empty
+	beq	1001b
+.endm
+
+.macro  busyuart,rd,rx
+1001:	ldr	\rd, [\rx, #(STM32_USART_SR_OFF)]	@ Read Status Register
+	tst	\rd, #STM32_USART_TC			@ TC = 1 = tx complete
+	beq	1001b
+.endm
diff --git a/arch/arm/include/debug/tegra.S b/arch/arm/include/debug/tegra.S
new file mode 100644
index 000000000..7454480d0
--- /dev/null
+++ b/arch/arm/include/debug/tegra.S
@@ -0,0 +1,218 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2010,2011 Google, Inc.
+ * Copyright (C) 2011-2012 NVIDIA CORPORATION. All Rights Reserved.
+ *
+ * Author:
+ *	Colin Cross <ccross@google.com>
+ *	Erik Gilling <konkers@google.com>
+ *	Doug Anderson <dianders@chromium.org>
+ *	Stephen Warren <swarren@nvidia.com>
+ *
+ * Portions based on mach-omap2's debug-macro.S
+ * Copyright (C) 1994-1999 Russell King
+ */
+
+#include <linux/serial_reg.h>
+
+#define UART_SHIFT 2
+
+/* Physical addresses */
+#define TEGRA_CLK_RESET_BASE		0x60006000
+#define TEGRA_APB_MISC_BASE		0x70000000
+#define TEGRA_UARTA_BASE		0x70006000
+#define TEGRA_UARTB_BASE		0x70006040
+#define TEGRA_UARTC_BASE		0x70006200
+#define TEGRA_UARTD_BASE		0x70006300
+#define TEGRA_UARTE_BASE		0x70006400
+#define TEGRA_PMC_BASE			0x7000e400
+
+#define TEGRA_CLK_RST_DEVICES_L		(TEGRA_CLK_RESET_BASE + 0x04)
+#define TEGRA_CLK_RST_DEVICES_H		(TEGRA_CLK_RESET_BASE + 0x08)
+#define TEGRA_CLK_RST_DEVICES_U		(TEGRA_CLK_RESET_BASE + 0x0c)
+#define TEGRA_CLK_OUT_ENB_L		(TEGRA_CLK_RESET_BASE + 0x10)
+#define TEGRA_CLK_OUT_ENB_H		(TEGRA_CLK_RESET_BASE + 0x14)
+#define TEGRA_CLK_OUT_ENB_U		(TEGRA_CLK_RESET_BASE + 0x18)
+#define TEGRA_PMC_SCRATCH20		(TEGRA_PMC_BASE + 0xa0)
+#define TEGRA_APB_MISC_GP_HIDREV	(TEGRA_APB_MISC_BASE + 0x804)
+
+/*
+ * Must be section-aligned since a section mapping is used early on.
+ * Must not overlap with regions in mach-tegra/io.c:tegra_io_desc[].
+ */
+#define UART_VIRTUAL_BASE		0xfe800000
+
+#define checkuart(rp, rv, lhu, bit, uart) \
+		/* Load address of CLK_RST register */ \
+		ldr	rp, =TEGRA_CLK_RST_DEVICES_##lhu ; \
+		/* Load value from CLK_RST register */ \
+		ldr	rp, [rp, #0] ; \
+		/* Test UART's reset bit */ \
+		tst	rp, #(1 << bit) ; \
+		/* If set, can't use UART; jump to save no UART */ \
+		bne	90f ; \
+		/* Load address of CLK_OUT_ENB register */ \
+		ldr	rp, =TEGRA_CLK_OUT_ENB_##lhu ; \
+		/* Load value from CLK_OUT_ENB register */ \
+		ldr	rp, [rp, #0] ; \
+		/* Test UART's clock enable bit */ \
+		tst	rp, #(1 << bit) ; \
+		/* If clear, can't use UART; jump to save no UART */ \
+		beq	90f ; \
+		/* Passed all tests, load address of UART registers */ \
+		ldr	rp, =TEGRA_UART##uart##_BASE ; \
+		/* Jump to save UART address */ \
+		b 91f
+
+		.macro  addruart, rp, rv, tmp
+		adr	\rp, 99f		@ actual addr of 99f
+		ldr	\rv, [\rp]		@ linked addr is stored there
+		sub	\rv, \rv, \rp		@ offset between the two
+		ldr	\rp, [\rp, #4]		@ linked tegra_uart_config
+		sub	\tmp, \rp, \rv		@ actual tegra_uart_config
+		ldr	\rp, [\tmp]		@ Load tegra_uart_config
+		cmp	\rp, #1			@ needs initialization?
+		bne	100f			@ no; go load the addresses
+		mov	\rv, #0			@ yes; record init is done
+		str	\rv, [\tmp]
+
+#ifdef CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA
+		/* Check ODMDATA */
+10:		ldr	\rp, =TEGRA_PMC_SCRATCH20
+		ldr	\rp, [\rp, #0]		@ Load PMC_SCRATCH20
+		lsr	\rv, \rp, #18		@ 19:18 are console type
+		and	\rv, \rv, #3
+		cmp	\rv, #2			@ 2 and 3 mean DCC, UART
+		beq	11f			@ some boards swap the meaning
+		cmp	\rv, #3			@ so accept either
+		bne	90f
+11:		lsr	\rv, \rp, #15		@ 17:15 are UART ID
+		and	\rv, #7	
+		cmp	\rv, #0			@ UART 0?
+		beq	20f
+		cmp	\rv, #1			@ UART 1?
+		beq	21f
+		cmp	\rv, #2			@ UART 2?
+		beq	22f
+		cmp	\rv, #3			@ UART 3?
+		beq	23f
+		cmp	\rv, #4			@ UART 4?
+		beq	24f
+		b	90f			@ invalid
+#endif
+
+#if defined(CONFIG_TEGRA_DEBUG_UARTA) || \
+    defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA)
+		/* Check UART A validity */
+20:		checkuart(\rp, \rv, L, 6, A)
+#endif
+
+#if defined(CONFIG_TEGRA_DEBUG_UARTB) || \
+    defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA)
+		/* Check UART B validity */
+21:		checkuart(\rp, \rv, L, 7, B)
+#endif
+
+#if defined(CONFIG_TEGRA_DEBUG_UARTC) || \
+    defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA)
+		/* Check UART C validity */
+22:		checkuart(\rp, \rv, H, 23, C)
+#endif
+
+#if defined(CONFIG_TEGRA_DEBUG_UARTD) || \
+    defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA)
+		/* Check UART D validity */
+23:		checkuart(\rp, \rv, U, 1, D)
+#endif
+
+#if defined(CONFIG_TEGRA_DEBUG_UARTE) || \
+    defined(CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA)
+		/* Check UART E validity */
+24:
+		checkuart(\rp, \rv, U, 2, E)
+#endif
+
+		/* No valid UART found */
+90:		mov	\rp, #0
+		/* fall through */
+
+		/* Record whichever UART we chose */
+91:		str	\rp, [\tmp, #4]		@ Store in tegra_uart_phys
+		cmp	\rp, #0			@ Valid UART address?
+		bne	92f			@ Yes, go process it
+		str	\rp, [\tmp, #8]		@ Store 0 in tegra_uart_virt
+		b	100f			@ Done
+92:		and	\rv, \rp, #0xffffff	@ offset within 1MB section
+		add	\rv, \rv, #UART_VIRTUAL_BASE
+		str	\rv, [\tmp, #8]		@ Store in tegra_uart_virt
+		b	100f
+
+		.align
+99:		.word	.
+#if defined(ZIMAGE)
+		.word	. + 4
+/*
+ * Storage for the state maintained by the macro.
+ *
+ * In the kernel proper, this data is located in arch/arm/mach-tegra/tegra.c.
+ * That's because this header is included from multiple files, and we only
+ * want a single copy of the data. In particular, the UART probing code above
+ * assumes it's running using physical addresses. This is true when this file
+ * is included from head.o, but not when included from debug.o. So we need
+ * to share the probe results between the two copies, rather than having
+ * to re-run the probing again later.
+ *
+ * In the decompressor, we put the storage right here, since common.c
+ * isn't included in the decompressor build. This storage data gets put in
+ * .text even though it's really data, since .data is discarded from the
+ * decompressor. Luckily, .text is writeable in the decompressor, unless
+ * CONFIG_ZBOOT_ROM. That dependency is handled in arch/arm/Kconfig.debug.
+ */
+		/* Debug UART initialization required */
+		.word	1
+		/* Debug UART physical address */
+		.word	0
+		/* Debug UART virtual address */
+		.word	0
+#else
+		.word	tegra_uart_config
+#endif
+		.ltorg
+
+		/* Load previously selected UART address */
+100:		ldr	\rp, [\tmp, #4]		@ Load tegra_uart_phys
+		ldr	\rv, [\tmp, #8]		@ Load tegra_uart_virt
+		.endm
+
+/*
+ * Code below is swiped from <asm/hardware/debug-8250.S>, but add an extra
+ * check to make sure that the UART address is actually valid.
+ */
+
+		.macro	senduart, rd, rx
+		cmp	\rx, #0
+		strbne	\rd, [\rx, #UART_TX << UART_SHIFT]
+1001:
+		.endm
+
+		.macro	busyuart, rd, rx
+		cmp	\rx, #0
+		beq	1002f
+1001:		ldrb	\rd, [\rx, #UART_LSR << UART_SHIFT]
+		and	\rd, \rd, #UART_LSR_THRE
+		teq	\rd, #UART_LSR_THRE
+		bne	1001b
+1002:
+		.endm
+
+		.macro	waituartcts, rd, rx
+		cmp	\rx, #0
+		beq	1002f
+1001:		ldrb	\rd, [\rx, #UART_MSR << UART_SHIFT]
+		tst	\rd, #UART_MSR_CTS
+		beq	1001b
+1002:
+		.endm
+
+		.macro	waituarttxrdy,rd,rx
+		.endm
diff --git a/arch/arm/include/debug/uncompress.h b/arch/arm/include/debug/uncompress.h
new file mode 100644
index 000000000..ff0b22729
--- /dev/null
+++ b/arch/arm/include/debug/uncompress.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifdef CONFIG_DEBUG_UNCOMPRESS
+extern void putc(int c);
+#else
+static inline void putc(int c) {}
+#endif
+static inline void flush(void) {}
+static inline void arch_decomp_setup(void) {}
diff --git a/arch/arm/include/debug/ux500.S b/arch/arm/include/debug/ux500.S
new file mode 100644
index 000000000..c51690094
--- /dev/null
+++ b/arch/arm/include/debug/ux500.S
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Debugging macro include header
+ *
+ *  Copyright (C) 2009 ST-Ericsson
+ */
+
+
+#if CONFIG_UX500_DEBUG_UART > 2
+#error Invalid Ux500 debug UART
+#endif
+
+/*
+ * DEBUG_LL only works if only one SOC is built in.  We don't use #else below
+ * in order to get "__UX500_UART redefined" warnings if more than one SOC is
+ * built, so that there's some hint during the build that something is wrong.
+ */
+
+#ifdef CONFIG_UX500_SOC_DB8500
+#define U8500_UART0_PHYS_BASE	(0x80120000)
+#define U8500_UART1_PHYS_BASE	(0x80121000)
+#define U8500_UART2_PHYS_BASE	(0x80007000)
+#define __UX500_PHYS_UART(n)	U8500_UART##n##_PHYS_BASE
+#endif
+
+#if !defined(__UX500_PHYS_UART)
+#error Unknown SOC
+#endif
+
+#define UX500_PHYS_UART(n)	__UX500_PHYS_UART(n)
+#define UART_PHYS_BASE	UX500_PHYS_UART(CONFIG_UX500_DEBUG_UART)
+#define UART_VIRT_BASE	(0xfff07000)
+
+	.macro	addruart, rp, rv, tmp
+	ldr	\rp, =UART_PHYS_BASE		@ no, physical address
+	ldr	\rv, =UART_VIRT_BASE		@ yes, virtual address
+	.endm
+
+#include <debug/pl01x.S>
diff --git a/arch/arm/include/debug/vexpress.S b/arch/arm/include/debug/vexpress.S
new file mode 100644
index 000000000..ccb22e9a8
--- /dev/null
+++ b/arch/arm/include/debug/vexpress.S
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* arch/arm/mach-realview/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ */
+
+#define DEBUG_LL_PHYS_BASE		0x10000000
+#define DEBUG_LL_UART_OFFSET		0x00009000
+
+#define DEBUG_LL_PHYS_BASE_RS1		0x1c000000
+#define DEBUG_LL_UART_OFFSET_RS1	0x00090000
+
+#define DEBUG_LL_UART_PHYS_CRX		0xb0090000
+
+#define DEBUG_LL_VIRT_BASE		0xf8000000
+
+#if defined(CONFIG_DEBUG_VEXPRESS_UART0_DETECT)
+
+		.macro	addruart,rp,rv,tmp
+		.arch   armv7-a
+
+		@ Make an educated guess regarding the memory map:
+		@ - the original A9 core tile (based on ARM Cortex-A9 r0p1)
+		@   should use UART at 0x10009000
+		@ - all other (RS1 complaint) tiles use UART mapped
+		@   at 0x1c090000
+		mrc	p15, 0, \rp, c0, c0, 0
+		movw	\rv, #0xc091
+		movt	\rv, #0x410f
+		cmp	\rp, \rv
+
+		@ Original memory map
+		moveq	\rp, #DEBUG_LL_UART_OFFSET
+		orreq	\rv, \rp, #DEBUG_LL_VIRT_BASE
+		orreq	\rp, \rp, #DEBUG_LL_PHYS_BASE
+
+		@ RS1 memory map
+		movne	\rp, #DEBUG_LL_UART_OFFSET_RS1
+		orrne	\rv, \rp, #DEBUG_LL_VIRT_BASE
+		orrne	\rp, \rp, #DEBUG_LL_PHYS_BASE_RS1
+
+		.endm
+
+#include <debug/pl01x.S>
+#endif
diff --git a/arch/arm/include/debug/vf.S b/arch/arm/include/debug/vf.S
new file mode 100644
index 000000000..035bcbf11
--- /dev/null
+++ b/arch/arm/include/debug/vf.S
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ */
+
+#define VF_UART0_BASE_ADDR	0x40027000
+#define VF_UART1_BASE_ADDR	0x40028000
+#define VF_UART2_BASE_ADDR	0x40029000
+#define VF_UART3_BASE_ADDR	0x4002a000
+#define VF_UART_BASE_ADDR(n)	VF_UART##n##_BASE_ADDR
+#define VF_UART_BASE(n)		VF_UART_BASE_ADDR(n)
+#define VF_UART_PHYSICAL_BASE	VF_UART_BASE(CONFIG_DEBUG_VF_UART_PORT)
+
+#define VF_UART_VIRTUAL_BASE	0xfe000000
+
+	.macro	addruart, rp, rv, tmp
+	ldr	\rp, =VF_UART_PHYSICAL_BASE 	@ physical
+	and	\rv, \rp, #0xffffff		@ offset within 16MB section
+	add	\rv, \rv, #VF_UART_VIRTUAL_BASE
+	.endm
+
+	.macro	senduart, rd, rx
+	strb	\rd, [\rx, #0x7]	@ Data Register
+	.endm
+
+	.macro	busyuart, rd, rx
+1001:	ldrb	\rd, [\rx, #0x4]	@ Status Register 1
+	tst	\rd, #1 << 6		@ TC
+	beq	1001b			@ wait until transmit done
+	.endm
+
+	.macro	waituartcts,rd,rx
+	.endm
+
+	.macro	waituarttxrdy,rd,rx
+	.endm
diff --git a/arch/arm/include/debug/vt8500.S b/arch/arm/include/debug/vt8500.S
new file mode 100644
index 000000000..d01094fdb
--- /dev/null
+++ b/arch/arm/include/debug/vt8500.S
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* 
+ * Debugging macro include header
+ *
+ *  Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *    Moved from arch/arm/mach-vt8500/include/mach/debug-macro.S
+ *    Minor changes for readability.
+ */
+
+#define DEBUG_LL_PHYS_BASE		0xD8000000
+#define DEBUG_LL_VIRT_BASE		0xF8000000
+#define DEBUG_LL_UART_OFFSET		0x00200000
+
+#if defined(CONFIG_DEBUG_VT8500_UART0)
+	.macro	addruart, rp, rv, tmp
+	mov	\rp,      #DEBUG_LL_UART_OFFSET
+	orr	\rv, \rp, #DEBUG_LL_VIRT_BASE
+	orr	\rp, \rp, #DEBUG_LL_PHYS_BASE
+	.endm
+
+	.macro	senduart,rd,rx
+	strb	\rd, [\rx, #0]
+	.endm
+
+	.macro	busyuart,rd,rx
+1001:	ldr	\rd, [\rx, #0x1c]
+	ands	\rd, \rd, #0x2
+	bne	1001b
+	.endm
+
+	.macro	waituartcts,rd,rx
+	.endm
+
+	.macro	waituarttxrdy,rd,rx
+	.endm
+
+#endif
diff --git a/arch/arm/include/debug/zynq.S b/arch/arm/include/debug/zynq.S
new file mode 100644
index 000000000..5d42cc35e
--- /dev/null
+++ b/arch/arm/include/debug/zynq.S
@@ -0,0 +1,51 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Debugging macro include header
+ *
+ *  Copyright (C) 2011 Xilinx
+ */
+#define UART_CR_OFFSET		0x00  /* Control Register [8:0] */
+#define UART_SR_OFFSET		0x2C  /* Channel Status [11:0] */
+#define UART_FIFO_OFFSET	0x30  /* FIFO [15:0] or [7:0] */
+
+#define UART_SR_TXFULL		0x00000010	/* TX FIFO full */
+#define UART_SR_TXEMPTY		0x00000008	/* TX FIFO empty */
+
+#define UART0_PHYS		0xE0000000
+#define UART0_VIRT		0xF0800000
+#define UART1_PHYS		0xE0001000
+#define UART1_VIRT		0xF0801000
+
+#if IS_ENABLED(CONFIG_DEBUG_ZYNQ_UART1)
+# define LL_UART_PADDR		UART1_PHYS
+# define LL_UART_VADDR		UART1_VIRT
+#else
+# define LL_UART_PADDR		UART0_PHYS
+# define LL_UART_VADDR		UART0_VIRT
+#endif
+
+		.macro	addruart, rp, rv, tmp
+		ldr	\rp, =LL_UART_PADDR	@ physical
+		ldr	\rv, =LL_UART_VADDR	@ virtual
+		.endm
+
+		.macro	senduart,rd,rx
+		strb	\rd, [\rx, #UART_FIFO_OFFSET]	@ TXDATA
+		.endm
+
+		.macro	waituartcts,rd,rx
+		.endm
+
+		.macro	waituarttxrdy,rd,rx
+1001:		ldr	\rd, [\rx, #UART_SR_OFFSET]
+ARM_BE8(	rev	\rd, \rd )
+		tst	\rd, #UART_SR_TXEMPTY
+		beq	1001b
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		ldr	\rd, [\rx, #UART_SR_OFFSET]	@ get status register
+ARM_BE8(	rev	\rd, \rd )
+		tst	\rd, #UART_SR_TXFULL		@
+		bne	1002b			@ wait if FIFO is full
+		.endm