Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 133 insertions, 0 deletions

diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S
new file mode 100644
index 000000000..1762f9199
--- /dev/null
+++ b/arch/arm/mach-omap2/omap-headsmp.S
@@ -0,0 +1,133 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Secondary CPU startup routine source file.
+ *
+ * Copyright (C) 2009-2014 Texas Instruments, Inc.
+ *
+ * Author:
+ *      Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Interface functions needed for the SMP. This file is based on arm
+ * realview smp platform.
+ * Copyright (c) 2003 ARM Limited.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+#include <asm/assembler.h>
+
+#include "omap44xx.h"
+
+/* Physical address needed since MMU not enabled yet on secondary core */
+#define AUX_CORE_BOOT0_PA			0x48281800
+#define API_HYP_ENTRY				0x102
+
+ENTRY(omap_secondary_startup)
+#ifdef CONFIG_SMP
+	b	secondary_startup
+#else
+/* Should never get here */
+again:	wfi
+	b	again
+#endif
+#ENDPROC(omap_secondary_startup)
+
+/*
+ * OMAP5 specific entry point for secondary CPU to jump from ROM
+ * code.  This routine also provides a holding flag into which
+ * secondary core is held until we're ready for it to initialise.
+ * The primary core will update this flag using a hardware
+ * register AuxCoreBoot0.
+ */
+ENTRY(omap5_secondary_startup)
+wait:	ldr	r2, =AUX_CORE_BOOT0_PA	@ read from AuxCoreBoot0
+	ldr	r0, [r2]
+	mov	r0, r0, lsr #5
+	mrc	p15, 0, r4, c0, c0, 5
+	and	r4, r4, #0x0f
+	cmp	r0, r4
+	bne	wait
+	b	omap_secondary_startup
+ENDPROC(omap5_secondary_startup)
+/*
+ * Same as omap5_secondary_startup except we call into the ROM to
+ * enable HYP mode first.  This is called instead of
+ * omap5_secondary_startup if the primary CPU was put into HYP mode by
+ * the boot loader.
+ */
+	.arch armv7-a
+	.arch_extension sec
+ENTRY(omap5_secondary_hyp_startup)
+wait_2:	ldr	r2, =AUX_CORE_BOOT0_PA	@ read from AuxCoreBoot0
+	ldr	r0, [r2]
+	mov	r0, r0, lsr #5
+	mrc	p15, 0, r4, c0, c0, 5
+	and	r4, r4, #0x0f
+	cmp	r0, r4
+	bne	wait_2
+	ldr	r12, =API_HYP_ENTRY
+	badr	r0, hyp_boot
+	smc	#0
+hyp_boot:
+	b	omap_secondary_startup
+ENDPROC(omap5_secondary_hyp_startup)
+/*
+ * OMAP4 specific entry point for secondary CPU to jump from ROM
+ * code.  This routine also provides a holding flag into which
+ * secondary core is held until we're ready for it to initialise.
+ * The primary core will update this flag using a hardware
+ * register AuxCoreBoot0.
+ */
+ENTRY(omap4_secondary_startup)
+hold:	ldr	r12,=0x103
+	dsb
+	smc	#0			@ read from AuxCoreBoot0
+	mov	r0, r0, lsr #9
+	mrc	p15, 0, r4, c0, c0, 5
+	and	r4, r4, #0x0f
+	cmp	r0, r4
+	bne	hold
+
+	/*
+	 * we've been released from the wait loop,secondary_stack
+	 * should now contain the SVC stack for this core
+	 */
+	b	omap_secondary_startup
+ENDPROC(omap4_secondary_startup)
+
+ENTRY(omap4460_secondary_startup)
+hold_2:	ldr	r12,=0x103
+	dsb
+	smc	#0			@ read from AuxCoreBoot0
+	mov	r0, r0, lsr #9
+	mrc	p15, 0, r4, c0, c0, 5
+	and	r4, r4, #0x0f
+	cmp	r0, r4
+	bne	hold_2
+
+	/*
+	 * GIC distributor control register has changed between
+	 * CortexA9 r1pX and r2pX. The Control Register secure
+	 * banked version is now composed of 2 bits:
+	 * bit 0 == Secure Enable
+	 * bit 1 == Non-Secure Enable
+	 * The Non-Secure banked register has not changed
+	 * Because the ROM Code is based on the r1pX GIC, the CPU1
+	 * GIC restoration will cause a problem to CPU0 Non-Secure SW.
+	 * The workaround must be:
+	 * 1) Before doing the CPU1 wakeup, CPU0 must disable
+	 * the GIC distributor
+	 * 2) CPU1 must re-enable the GIC distributor on
+	 * it's wakeup path.
+	 */
+	ldr	r1, =OMAP44XX_GIC_DIST_BASE
+	ldr	r0, [r1]
+	orr	r0, #1
+	str	r0, [r1]
+
+	/*
+	 * we've been released from the wait loop,secondary_stack
+	 * should now contain the SVC stack for this core
+	 */
+	b	omap_secondary_startup
+ENDPROC(omap4460_secondary_startup)