Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 199 insertions, 0 deletions

diff --git a/arch/m68k/coldfire/intc-simr.c b/arch/m68k/coldfire/intc-simr.c
new file mode 100644
index 000000000..f7c2c41b3
--- /dev/null
+++ b/arch/m68k/coldfire/intc-simr.c
@@ -0,0 +1,199 @@
+/*
+ * intc-simr.c
+ *
+ * Interrupt controller code for the ColdFire 5208, 5207 & 532x parts.
+ *
+ * (C) Copyright 2009-2011, Greg Ungerer <gerg@snapgear.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/traps.h>
+
+/*
+ *	The EDGE Port interrupts are the fixed 7 external interrupts.
+ *	They need some special treatment, for example they need to be acked.
+ */
+#ifdef CONFIG_M520x
+/*
+ *	The 520x parts only support a limited range of these external
+ *	interrupts, only 1, 4 and 7 (as interrupts 65, 66 and 67).
+ */
+#define	EINT0	64	/* Is not actually used, but spot reserved for it */
+#define	EINT1	65	/* EDGE Port interrupt 1 */
+#define	EINT4	66	/* EDGE Port interrupt 4 */
+#define	EINT7	67	/* EDGE Port interrupt 7 */
+
+static unsigned int irqebitmap[] = { 0, 1, 4, 7 };
+static inline unsigned int irq2ebit(unsigned int irq)
+{
+	return irqebitmap[irq - EINT0];
+}
+
+#else
+
+/*
+ *	Most of the ColdFire parts with the EDGE Port module just have
+ *	a strait direct mapping of the 7 external interrupts. Although
+ *	there is a bit reserved for 0, it is not used.
+ */
+#define	EINT0	64	/* Is not actually used, but spot reserved for it */
+#define	EINT1	65	/* EDGE Port interrupt 1 */
+#define	EINT7	71	/* EDGE Port interrupt 7 */
+
+static inline unsigned int irq2ebit(unsigned int irq)
+{
+	return irq - EINT0;
+}
+
+#endif
+
+/*
+ *	There maybe one, two or three interrupt control units, each has 64
+ *	interrupts. If there is no second or third unit then MCFINTC1_* or
+ *	MCFINTC2_* defines will be 0 (and code for them optimized away).
+ */
+
+static void intc_irq_mask(struct irq_data *d)
+{
+	unsigned int irq = d->irq - MCFINT_VECBASE;
+
+	if (MCFINTC2_SIMR && (irq > 127))
+		__raw_writeb(irq - 128, MCFINTC2_SIMR);
+	else if (MCFINTC1_SIMR && (irq > 63))
+		__raw_writeb(irq - 64, MCFINTC1_SIMR);
+	else
+		__raw_writeb(irq, MCFINTC0_SIMR);
+}
+
+static void intc_irq_unmask(struct irq_data *d)
+{
+	unsigned int irq = d->irq - MCFINT_VECBASE;
+
+	if (MCFINTC2_CIMR && (irq > 127))
+		__raw_writeb(irq - 128, MCFINTC2_CIMR);
+	else if (MCFINTC1_CIMR && (irq > 63))
+		__raw_writeb(irq - 64, MCFINTC1_CIMR);
+	else
+		__raw_writeb(irq, MCFINTC0_CIMR);
+}
+
+static void intc_irq_ack(struct irq_data *d)
+{
+	unsigned int ebit = irq2ebit(d->irq);
+
+	__raw_writeb(0x1 << ebit, MCFEPORT_EPFR);
+}
+
+static unsigned int intc_irq_startup(struct irq_data *d)
+{
+	unsigned int irq = d->irq;
+
+	if ((irq >= EINT1) && (irq <= EINT7)) {
+		unsigned int ebit = irq2ebit(irq);
+		u8 v;
+
+#if defined(MCFEPORT_EPDDR)
+		/* Set EPORT line as input */
+		v = __raw_readb(MCFEPORT_EPDDR);
+		__raw_writeb(v & ~(0x1 << ebit), MCFEPORT_EPDDR);
+#endif
+
+		/* Set EPORT line as interrupt source */
+		v = __raw_readb(MCFEPORT_EPIER);
+		__raw_writeb(v | (0x1 << ebit), MCFEPORT_EPIER);
+	}
+
+	irq -= MCFINT_VECBASE;
+	if (MCFINTC2_ICR0 && (irq > 127))
+		__raw_writeb(5, MCFINTC2_ICR0 + irq - 128);
+	else if (MCFINTC1_ICR0 && (irq > 63))
+		__raw_writeb(5, MCFINTC1_ICR0 + irq - 64);
+	else
+		__raw_writeb(5, MCFINTC0_ICR0 + irq);
+
+	intc_irq_unmask(d);
+	return 0;
+}
+
+static int intc_irq_set_type(struct irq_data *d, unsigned int type)
+{
+	unsigned int ebit, irq = d->irq;
+	u16 pa, tb;
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		tb = 0x1;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		tb = 0x2;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		tb = 0x3;
+		break;
+	default:
+		/* Level triggered */
+		tb = 0;
+		break;
+	}
+
+	if (tb)
+		irq_set_handler(irq, handle_edge_irq);
+
+	ebit = irq2ebit(irq) * 2;
+	pa = __raw_readw(MCFEPORT_EPPAR);
+	pa = (pa & ~(0x3 << ebit)) | (tb << ebit);
+	__raw_writew(pa, MCFEPORT_EPPAR);
+	
+	return 0;
+}
+
+static struct irq_chip intc_irq_chip = {
+	.name		= "CF-INTC",
+	.irq_startup	= intc_irq_startup,
+	.irq_mask	= intc_irq_mask,
+	.irq_unmask	= intc_irq_unmask,
+};
+
+static struct irq_chip intc_irq_chip_edge_port = {
+	.name		= "CF-INTC-EP",
+	.irq_startup	= intc_irq_startup,
+	.irq_mask	= intc_irq_mask,
+	.irq_unmask	= intc_irq_unmask,
+	.irq_ack	= intc_irq_ack,
+	.irq_set_type	= intc_irq_set_type,
+};
+
+void __init init_IRQ(void)
+{
+	int irq, eirq;
+
+	/* Mask all interrupt sources */
+	__raw_writeb(0xff, MCFINTC0_SIMR);
+	if (MCFINTC1_SIMR)
+		__raw_writeb(0xff, MCFINTC1_SIMR);
+	if (MCFINTC2_SIMR)
+		__raw_writeb(0xff, MCFINTC2_SIMR);
+
+	eirq = MCFINT_VECBASE + 64 + (MCFINTC1_ICR0 ? 64 : 0) +
+						(MCFINTC2_ICR0 ? 64 : 0);
+	for (irq = MCFINT_VECBASE; (irq < eirq); irq++) {
+		if ((irq >= EINT1) && (irq <= EINT7))
+			irq_set_chip(irq, &intc_irq_chip_edge_port);
+		else
+			irq_set_chip(irq, &intc_irq_chip);
+		irq_set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH);
+		irq_set_handler(irq, handle_level_irq);
+	}
+}
+