Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

14 files changed, 1945 insertions, 0 deletions

diff --git a/arch/mips/ath25/Kconfig b/arch/mips/ath25/Kconfig
new file mode 100644
index 000000000..3014c80cf
--- /dev/null
+++ b/arch/mips/ath25/Kconfig
@@ -0,0 +1,17 @@
+# SPDX-License-Identifier: GPL-2.0
+config SOC_AR5312
+	bool "Atheros AR5312/AR2312+ SoC support"
+	depends on ATH25
+	default y
+
+config SOC_AR2315
+	bool "Atheros AR2315+ SoC support"
+	depends on ATH25
+	default y
+
+config PCI_AR2315
+	bool "Atheros AR2315 PCI controller support"
+	depends on SOC_AR2315
+	select ARCH_HAS_PHYS_TO_DMA
+	select FORCE_PCI
+	default y
diff --git a/arch/mips/ath25/Makefile b/arch/mips/ath25/Makefile
new file mode 100644
index 000000000..eabad7da4
--- /dev/null
+++ b/arch/mips/ath25/Makefile
@@ -0,0 +1,16 @@
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License.  See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2006 FON Technology, SL.
+# Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+# Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
+#
+
+obj-y += board.o prom.o devices.o
+
+obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+
+obj-$(CONFIG_SOC_AR5312) += ar5312.o
+obj-$(CONFIG_SOC_AR2315) += ar2315.o
diff --git a/arch/mips/ath25/Platform b/arch/mips/ath25/Platform
new file mode 100644
index 000000000..aef098b6f
--- /dev/null
+++ b/arch/mips/ath25/Platform
@@ -0,0 +1,5 @@
+#
+# Atheros AR531X/AR231X WiSoC
+#
+cflags-$(CONFIG_ATH25)		+= -I$(srctree)/arch/mips/include/asm/mach-ath25
+load-$(CONFIG_ATH25)		+= 0xffffffff80041000
diff --git a/arch/mips/ath25/ar2315.c b/arch/mips/ath25/ar2315.c
new file mode 100644
index 000000000..8ccf167c1
--- /dev/null
+++ b/arch/mips/ath25/ar2315.c
@@ -0,0 +1,362 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc.,  All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2012 Alexandros C. Couloumbis <alex@ozo.com>
+ */
+
+/*
+ * Platform devices for Atheros AR2315 SoCs
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+#include <linux/irqdomain.h>
+#include <linux/interrupt.h>
+#include <linux/memblock.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <asm/bootinfo.h>
+#include <asm/reboot.h>
+#include <asm/time.h>
+
+#include <ath25_platform.h>
+
+#include "devices.h"
+#include "ar2315.h"
+#include "ar2315_regs.h"
+
+static void __iomem *ar2315_rst_base;
+static struct irq_domain *ar2315_misc_irq_domain;
+
+static inline u32 ar2315_rst_reg_read(u32 reg)
+{
+	return __raw_readl(ar2315_rst_base + reg);
+}
+
+static inline void ar2315_rst_reg_write(u32 reg, u32 val)
+{
+	__raw_writel(val, ar2315_rst_base + reg);
+}
+
+static inline void ar2315_rst_reg_mask(u32 reg, u32 mask, u32 val)
+{
+	u32 ret = ar2315_rst_reg_read(reg);
+
+	ret &= ~mask;
+	ret |= val;
+	ar2315_rst_reg_write(reg, ret);
+}
+
+static irqreturn_t ar2315_ahb_err_handler(int cpl, void *dev_id)
+{
+	ar2315_rst_reg_write(AR2315_AHB_ERR0, AR2315_AHB_ERROR_DET);
+	ar2315_rst_reg_read(AR2315_AHB_ERR1);
+
+	pr_emerg("AHB fatal error\n");
+	machine_restart("AHB error"); /* Catastrophic failure */
+
+	return IRQ_HANDLED;
+}
+
+static void ar2315_misc_irq_handler(struct irq_desc *desc)
+{
+	u32 pending = ar2315_rst_reg_read(AR2315_ISR) &
+		      ar2315_rst_reg_read(AR2315_IMR);
+	unsigned nr;
+	int ret = 0;
+
+	if (pending) {
+		struct irq_domain *domain = irq_desc_get_handler_data(desc);
+
+		nr = __ffs(pending);
+
+		if (nr == AR2315_MISC_IRQ_GPIO)
+			ar2315_rst_reg_write(AR2315_ISR, AR2315_ISR_GPIO);
+		else if (nr == AR2315_MISC_IRQ_WATCHDOG)
+			ar2315_rst_reg_write(AR2315_ISR, AR2315_ISR_WD);
+
+		ret = generic_handle_domain_irq(domain, nr);
+	}
+
+	if (!pending || ret)
+		spurious_interrupt();
+}
+
+static void ar2315_misc_irq_unmask(struct irq_data *d)
+{
+	ar2315_rst_reg_mask(AR2315_IMR, 0, BIT(d->hwirq));
+}
+
+static void ar2315_misc_irq_mask(struct irq_data *d)
+{
+	ar2315_rst_reg_mask(AR2315_IMR, BIT(d->hwirq), 0);
+}
+
+static struct irq_chip ar2315_misc_irq_chip = {
+	.name		= "ar2315-misc",
+	.irq_unmask	= ar2315_misc_irq_unmask,
+	.irq_mask	= ar2315_misc_irq_mask,
+};
+
+static int ar2315_misc_irq_map(struct irq_domain *d, unsigned irq,
+			       irq_hw_number_t hw)
+{
+	irq_set_chip_and_handler(irq, &ar2315_misc_irq_chip, handle_level_irq);
+	return 0;
+}
+
+static const struct irq_domain_ops ar2315_misc_irq_domain_ops = {
+	.map = ar2315_misc_irq_map,
+};
+
+/*
+ * Called when an interrupt is received, this function
+ * determines exactly which interrupt it was, and it
+ * invokes the appropriate handler.
+ *
+ * Implicitly, we also define interrupt priority by
+ * choosing which to dispatch first.
+ */
+static void ar2315_irq_dispatch(void)
+{
+	u32 pending = read_c0_status() & read_c0_cause();
+
+	if (pending & CAUSEF_IP3)
+		do_IRQ(AR2315_IRQ_WLAN0);
+#ifdef CONFIG_PCI_AR2315
+	else if (pending & CAUSEF_IP5)
+		do_IRQ(AR2315_IRQ_LCBUS_PCI);
+#endif
+	else if (pending & CAUSEF_IP2)
+		do_IRQ(AR2315_IRQ_MISC);
+	else if (pending & CAUSEF_IP7)
+		do_IRQ(ATH25_IRQ_CPU_CLOCK);
+	else
+		spurious_interrupt();
+}
+
+void __init ar2315_arch_init_irq(void)
+{
+	struct irq_domain *domain;
+	unsigned irq;
+
+	ath25_irq_dispatch = ar2315_irq_dispatch;
+
+	domain = irq_domain_add_linear(NULL, AR2315_MISC_IRQ_COUNT,
+				       &ar2315_misc_irq_domain_ops, NULL);
+	if (!domain)
+		panic("Failed to add IRQ domain");
+
+	irq = irq_create_mapping(domain, AR2315_MISC_IRQ_AHB);
+	if (request_irq(irq, ar2315_ahb_err_handler, 0, "ar2315-ahb-error",
+			NULL))
+		pr_err("Failed to register ar2315-ahb-error interrupt\n");
+
+	irq_set_chained_handler_and_data(AR2315_IRQ_MISC,
+					 ar2315_misc_irq_handler, domain);
+
+	ar2315_misc_irq_domain = domain;
+}
+
+void __init ar2315_init_devices(void)
+{
+	/* Find board configuration */
+	ath25_find_config(AR2315_SPI_READ_BASE, AR2315_SPI_READ_SIZE);
+
+	ath25_add_wmac(0, AR2315_WLAN0_BASE, AR2315_IRQ_WLAN0);
+}
+
+static void ar2315_restart(char *command)
+{
+	void (*mips_reset_vec)(void) = (void *)0xbfc00000;
+
+	local_irq_disable();
+
+	/* try reset the system via reset control */
+	ar2315_rst_reg_write(AR2315_COLD_RESET, AR2317_RESET_SYSTEM);
+
+	/* Cold reset does not work on the AR2315/6, use the GPIO reset bits
+	 * a workaround. Give it some time to attempt a gpio based hardware
+	 * reset (atheros reference design workaround) */
+
+	/* TODO: implement the GPIO reset workaround */
+
+	/* Some boards (e.g. Senao EOC-2610) don't implement the reset logic
+	 * workaround. Attempt to jump to the mips reset location -
+	 * the boot loader itself might be able to recover the system */
+	mips_reset_vec();
+}
+
+/*
+ * This table is indexed by bits 5..4 of the CLOCKCTL1 register
+ * to determine the predevisor value.
+ */
+static int clockctl1_predivide_table[4] __initdata = { 1, 2, 4, 5 };
+static int pllc_divide_table[5] __initdata = { 2, 3, 4, 6, 3 };
+
+static unsigned __init ar2315_sys_clk(u32 clock_ctl)
+{
+	unsigned int pllc_ctrl, cpu_div;
+	unsigned int pllc_out, refdiv, fdiv, divby2;
+	unsigned int clk_div;
+
+	pllc_ctrl = ar2315_rst_reg_read(AR2315_PLLC_CTL);
+	refdiv = ATH25_REG_MS(pllc_ctrl, AR2315_PLLC_REF_DIV);
+	refdiv = clockctl1_predivide_table[refdiv];
+	fdiv = ATH25_REG_MS(pllc_ctrl, AR2315_PLLC_FDBACK_DIV);
+	divby2 = ATH25_REG_MS(pllc_ctrl, AR2315_PLLC_ADD_FDBACK_DIV) + 1;
+	pllc_out = (40000000 / refdiv) * (2 * divby2) * fdiv;
+
+	/* clkm input selected */
+	switch (clock_ctl & AR2315_CPUCLK_CLK_SEL_M) {
+	case 0:
+	case 1:
+		clk_div = ATH25_REG_MS(pllc_ctrl, AR2315_PLLC_CLKM_DIV);
+		clk_div = pllc_divide_table[clk_div];
+		break;
+	case 2:
+		clk_div = ATH25_REG_MS(pllc_ctrl, AR2315_PLLC_CLKC_DIV);
+		clk_div = pllc_divide_table[clk_div];
+		break;
+	default:
+		pllc_out = 40000000;
+		clk_div = 1;
+		break;
+	}
+
+	cpu_div = ATH25_REG_MS(clock_ctl, AR2315_CPUCLK_CLK_DIV);
+	cpu_div = cpu_div * 2 ?: 1;
+
+	return pllc_out / (clk_div * cpu_div);
+}
+
+static inline unsigned ar2315_cpu_frequency(void)
+{
+	return ar2315_sys_clk(ar2315_rst_reg_read(AR2315_CPUCLK));
+}
+
+static inline unsigned ar2315_apb_frequency(void)
+{
+	return ar2315_sys_clk(ar2315_rst_reg_read(AR2315_AMBACLK));
+}
+
+void __init ar2315_plat_time_init(void)
+{
+	mips_hpt_frequency = ar2315_cpu_frequency() / 2;
+}
+
+void __init ar2315_plat_mem_setup(void)
+{
+	void __iomem *sdram_base;
+	u32 memsize, memcfg;
+	u32 devid;
+	u32 config;
+
+	/* Detect memory size */
+	sdram_base = ioremap(AR2315_SDRAMCTL_BASE,
+				     AR2315_SDRAMCTL_SIZE);
+	memcfg = __raw_readl(sdram_base + AR2315_MEM_CFG);
+	memsize   = 1 + ATH25_REG_MS(memcfg, AR2315_MEM_CFG_DATA_WIDTH);
+	memsize <<= 1 + ATH25_REG_MS(memcfg, AR2315_MEM_CFG_COL_WIDTH);
+	memsize <<= 1 + ATH25_REG_MS(memcfg, AR2315_MEM_CFG_ROW_WIDTH);
+	memsize <<= 3;
+	memblock_add(0, memsize);
+	iounmap(sdram_base);
+
+	ar2315_rst_base = ioremap(AR2315_RST_BASE, AR2315_RST_SIZE);
+
+	/* Detect the hardware based on the device ID */
+	devid = ar2315_rst_reg_read(AR2315_SREV) & AR2315_REV_CHIP;
+	switch (devid) {
+	case 0x91:	/* Need to check */
+		ath25_soc = ATH25_SOC_AR2318;
+		break;
+	case 0x90:
+		ath25_soc = ATH25_SOC_AR2317;
+		break;
+	case 0x87:
+		ath25_soc = ATH25_SOC_AR2316;
+		break;
+	case 0x86:
+	default:
+		ath25_soc = ATH25_SOC_AR2315;
+		break;
+	}
+	ath25_board.devid = devid;
+
+	/* Clear any lingering AHB errors */
+	config = read_c0_config();
+	write_c0_config(config & ~0x3);
+	ar2315_rst_reg_write(AR2315_AHB_ERR0, AR2315_AHB_ERROR_DET);
+	ar2315_rst_reg_read(AR2315_AHB_ERR1);
+	ar2315_rst_reg_write(AR2315_WDT_CTRL, AR2315_WDT_CTRL_IGNORE);
+
+	_machine_restart = ar2315_restart;
+}
+
+#ifdef CONFIG_PCI_AR2315
+static struct resource ar2315_pci_res[] = {
+	{
+		.name = "ar2315-pci-ctrl",
+		.flags = IORESOURCE_MEM,
+		.start = AR2315_PCI_BASE,
+		.end = AR2315_PCI_BASE + AR2315_PCI_SIZE - 1,
+	},
+	{
+		.name = "ar2315-pci-ext",
+		.flags = IORESOURCE_MEM,
+		.start = AR2315_PCI_EXT_BASE,
+		.end = AR2315_PCI_EXT_BASE + AR2315_PCI_EXT_SIZE - 1,
+	},
+	{
+		.name = "ar2315-pci",
+		.flags = IORESOURCE_IRQ,
+		.start = AR2315_IRQ_LCBUS_PCI,
+		.end = AR2315_IRQ_LCBUS_PCI,
+	},
+};
+#endif
+
+void __init ar2315_arch_init(void)
+{
+	unsigned irq = irq_create_mapping(ar2315_misc_irq_domain,
+					  AR2315_MISC_IRQ_UART0);
+
+	ath25_serial_setup(AR2315_UART0_BASE, irq, ar2315_apb_frequency());
+
+#ifdef CONFIG_PCI_AR2315
+	if (ath25_soc == ATH25_SOC_AR2315) {
+		/* Reset PCI DMA logic */
+		ar2315_rst_reg_mask(AR2315_RESET, 0, AR2315_RESET_PCIDMA);
+		msleep(20);
+		ar2315_rst_reg_mask(AR2315_RESET, AR2315_RESET_PCIDMA, 0);
+		msleep(20);
+
+		/* Configure endians */
+		ar2315_rst_reg_mask(AR2315_ENDIAN_CTL, 0, AR2315_CONFIG_PCIAHB |
+				    AR2315_CONFIG_PCIAHB_BRIDGE);
+
+		/* Configure as PCI host with DMA */
+		ar2315_rst_reg_write(AR2315_PCICLK, AR2315_PCICLK_PLLC_CLKM |
+				  (AR2315_PCICLK_IN_FREQ_DIV_6 <<
+				   AR2315_PCICLK_DIV_S));
+		ar2315_rst_reg_mask(AR2315_AHB_ARB_CTL, 0, AR2315_ARB_PCI);
+		ar2315_rst_reg_mask(AR2315_IF_CTL, AR2315_IF_PCI_CLK_MASK |
+				    AR2315_IF_MASK, AR2315_IF_PCI |
+				    AR2315_IF_PCI_HOST | AR2315_IF_PCI_INTR |
+				    (AR2315_IF_PCI_CLK_OUTPUT_CLK <<
+				     AR2315_IF_PCI_CLK_SHIFT));
+
+		platform_device_register_simple("ar2315-pci", -1,
+						ar2315_pci_res,
+						ARRAY_SIZE(ar2315_pci_res));
+	}
+#endif
+}
diff --git a/arch/mips/ath25/ar2315.h b/arch/mips/ath25/ar2315.h
new file mode 100644
index 000000000..fccc64f6d
--- /dev/null
+++ b/arch/mips/ath25/ar2315.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __AR2315_H
+#define __AR2315_H
+
+#ifdef CONFIG_SOC_AR2315
+
+void ar2315_arch_init_irq(void);
+void ar2315_init_devices(void);
+void ar2315_plat_time_init(void);
+void ar2315_plat_mem_setup(void);
+void ar2315_arch_init(void);
+
+#else
+
+static inline void ar2315_arch_init_irq(void) {}
+static inline void ar2315_init_devices(void) {}
+static inline void ar2315_plat_time_init(void) {}
+static inline void ar2315_plat_mem_setup(void) {}
+static inline void ar2315_arch_init(void) {}
+
+#endif
+
+#endif	/* __AR2315_H */
diff --git a/arch/mips/ath25/ar2315_regs.h b/arch/mips/ath25/ar2315_regs.h
new file mode 100644
index 000000000..16e86149c
--- /dev/null
+++ b/arch/mips/ath25/ar2315_regs.h
@@ -0,0 +1,410 @@
+/*
+ * Register definitions for AR2315+
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc.,  All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006-2008 Felix Fietkau <nbd@openwrt.org>
+ */
+
+#ifndef __ASM_MACH_ATH25_AR2315_REGS_H
+#define __ASM_MACH_ATH25_AR2315_REGS_H
+
+/*
+ * IRQs
+ */
+#define AR2315_IRQ_MISC		(MIPS_CPU_IRQ_BASE + 2)	/* C0_CAUSE: 0x0400 */
+#define AR2315_IRQ_WLAN0	(MIPS_CPU_IRQ_BASE + 3)	/* C0_CAUSE: 0x0800 */
+#define AR2315_IRQ_ENET0	(MIPS_CPU_IRQ_BASE + 4)	/* C0_CAUSE: 0x1000 */
+#define AR2315_IRQ_LCBUS_PCI	(MIPS_CPU_IRQ_BASE + 5)	/* C0_CAUSE: 0x2000 */
+#define AR2315_IRQ_WLAN0_POLL	(MIPS_CPU_IRQ_BASE + 6)	/* C0_CAUSE: 0x4000 */
+
+/*
+ * Miscellaneous interrupts, which share IP2.
+ */
+#define AR2315_MISC_IRQ_UART0		0
+#define AR2315_MISC_IRQ_I2C_RSVD	1
+#define AR2315_MISC_IRQ_SPI		2
+#define AR2315_MISC_IRQ_AHB		3
+#define AR2315_MISC_IRQ_APB		4
+#define AR2315_MISC_IRQ_TIMER		5
+#define AR2315_MISC_IRQ_GPIO		6
+#define AR2315_MISC_IRQ_WATCHDOG	7
+#define AR2315_MISC_IRQ_IR_RSVD		8
+#define AR2315_MISC_IRQ_COUNT		9
+
+/*
+ * Address map
+ */
+#define AR2315_SPI_READ_BASE	0x08000000	/* SPI flash */
+#define AR2315_SPI_READ_SIZE	0x01000000
+#define AR2315_WLAN0_BASE	0x10000000	/* Wireless MMR */
+#define AR2315_PCI_BASE		0x10100000	/* PCI MMR */
+#define AR2315_PCI_SIZE		0x00001000
+#define AR2315_SDRAMCTL_BASE	0x10300000	/* SDRAM MMR */
+#define AR2315_SDRAMCTL_SIZE	0x00000020
+#define AR2315_LOCAL_BASE	0x10400000	/* Local bus MMR */
+#define AR2315_ENET0_BASE	0x10500000	/* Ethernet MMR */
+#define AR2315_RST_BASE		0x11000000	/* Reset control MMR */
+#define AR2315_RST_SIZE		0x00000100
+#define AR2315_UART0_BASE	0x11100000	/* UART MMR */
+#define AR2315_SPI_MMR_BASE	0x11300000	/* SPI flash MMR */
+#define AR2315_SPI_MMR_SIZE	0x00000010
+#define AR2315_PCI_EXT_BASE	0x80000000	/* PCI external */
+#define AR2315_PCI_EXT_SIZE	0x40000000
+
+/*
+ * Configuration registers
+ */
+
+/* Cold reset register */
+#define AR2315_COLD_RESET		0x0000
+
+#define AR2315_RESET_COLD_AHB		0x00000001
+#define AR2315_RESET_COLD_APB		0x00000002
+#define AR2315_RESET_COLD_CPU		0x00000004
+#define AR2315_RESET_COLD_CPUWARM	0x00000008
+#define AR2315_RESET_SYSTEM		(RESET_COLD_CPU |\
+					 RESET_COLD_APB |\
+					 RESET_COLD_AHB)  /* full system */
+#define AR2317_RESET_SYSTEM		0x00000010
+
+/* Reset register */
+#define AR2315_RESET			0x0004
+
+#define AR2315_RESET_WARM_WLAN0_MAC	0x00000001  /* warm reset WLAN0 MAC */
+#define AR2315_RESET_WARM_WLAN0_BB	0x00000002  /* warm reset WLAN0 BB */
+#define AR2315_RESET_MPEGTS_RSVD	0x00000004  /* warm reset MPEG-TS */
+#define AR2315_RESET_PCIDMA		0x00000008  /* warm reset PCI ahb/dma */
+#define AR2315_RESET_MEMCTL		0x00000010  /* warm reset mem control */
+#define AR2315_RESET_LOCAL		0x00000020  /* warm reset local bus */
+#define AR2315_RESET_I2C_RSVD		0x00000040  /* warm reset I2C bus */
+#define AR2315_RESET_SPI		0x00000080  /* warm reset SPI iface */
+#define AR2315_RESET_UART0		0x00000100  /* warm reset UART0 */
+#define AR2315_RESET_IR_RSVD		0x00000200  /* warm reset IR iface */
+#define AR2315_RESET_EPHY0		0x00000400  /* cold reset ENET0 phy */
+#define AR2315_RESET_ENET0		0x00000800  /* cold reset ENET0 MAC */
+
+/* AHB master arbitration control */
+#define AR2315_AHB_ARB_CTL		0x0008
+
+#define AR2315_ARB_CPU			0x00000001  /* CPU, default */
+#define AR2315_ARB_WLAN			0x00000002  /* WLAN */
+#define AR2315_ARB_MPEGTS_RSVD		0x00000004  /* MPEG-TS */
+#define AR2315_ARB_LOCAL		0x00000008  /* Local bus */
+#define AR2315_ARB_PCI			0x00000010  /* PCI bus */
+#define AR2315_ARB_ETHERNET		0x00000020  /* Ethernet */
+#define AR2315_ARB_RETRY		0x00000100  /* Retry policy (debug) */
+
+/* Config Register */
+#define AR2315_ENDIAN_CTL		0x000c
+
+#define AR2315_CONFIG_AHB		0x00000001  /* EC-AHB bridge endian */
+#define AR2315_CONFIG_WLAN		0x00000002  /* WLAN byteswap */
+#define AR2315_CONFIG_MPEGTS_RSVD	0x00000004  /* MPEG-TS byteswap */
+#define AR2315_CONFIG_PCI		0x00000008  /* PCI byteswap */
+#define AR2315_CONFIG_MEMCTL		0x00000010  /* Mem controller endian */
+#define AR2315_CONFIG_LOCAL		0x00000020  /* Local bus byteswap */
+#define AR2315_CONFIG_ETHERNET		0x00000040  /* Ethernet byteswap */
+#define AR2315_CONFIG_MERGE		0x00000200  /* CPU write buffer merge */
+#define AR2315_CONFIG_CPU		0x00000400  /* CPU big endian */
+#define AR2315_CONFIG_BIG		0x00000400
+#define AR2315_CONFIG_PCIAHB		0x00000800
+#define AR2315_CONFIG_PCIAHB_BRIDGE	0x00001000
+#define AR2315_CONFIG_SPI		0x00008000  /* SPI byteswap */
+#define AR2315_CONFIG_CPU_DRAM		0x00010000
+#define AR2315_CONFIG_CPU_PCI		0x00020000
+#define AR2315_CONFIG_CPU_MMR		0x00040000
+
+/* NMI control */
+#define AR2315_NMI_CTL			0x0010
+
+#define AR2315_NMI_EN			1
+
+/* Revision Register - Initial value is 0x3010 (WMAC 3.0, AR231X 1.0). */
+#define AR2315_SREV			0x0014
+
+#define AR2315_REV_MAJ			0x000000f0
+#define AR2315_REV_MAJ_S		4
+#define AR2315_REV_MIN			0x0000000f
+#define AR2315_REV_MIN_S		0
+#define AR2315_REV_CHIP			(AR2315_REV_MAJ | AR2315_REV_MIN)
+
+/* Interface Enable */
+#define AR2315_IF_CTL			0x0018
+
+#define AR2315_IF_MASK			0x00000007
+#define AR2315_IF_DISABLED		0		/* Disable all */
+#define AR2315_IF_PCI			1		/* PCI */
+#define AR2315_IF_TS_LOCAL		2		/* Local bus */
+#define AR2315_IF_ALL			3		/* Emulation only */
+#define AR2315_IF_LOCAL_HOST		0x00000008
+#define AR2315_IF_PCI_HOST		0x00000010
+#define AR2315_IF_PCI_INTR		0x00000020
+#define AR2315_IF_PCI_CLK_MASK		0x00030000
+#define AR2315_IF_PCI_CLK_INPUT		0
+#define AR2315_IF_PCI_CLK_OUTPUT_LOW	1
+#define AR2315_IF_PCI_CLK_OUTPUT_CLK	2
+#define AR2315_IF_PCI_CLK_OUTPUT_HIGH	3
+#define AR2315_IF_PCI_CLK_SHIFT		16
+
+/* APB Interrupt control */
+#define AR2315_ISR			0x0020
+#define AR2315_IMR			0x0024
+#define AR2315_GISR			0x0028
+
+#define AR2315_ISR_UART0	0x00000001	/* high speed UART */
+#define AR2315_ISR_I2C_RSVD	0x00000002	/* I2C bus */
+#define AR2315_ISR_SPI		0x00000004	/* SPI bus */
+#define AR2315_ISR_AHB		0x00000008	/* AHB error */
+#define AR2315_ISR_APB		0x00000010	/* APB error */
+#define AR2315_ISR_TIMER	0x00000020	/* Timer */
+#define AR2315_ISR_GPIO		0x00000040	/* GPIO */
+#define AR2315_ISR_WD		0x00000080	/* Watchdog */
+#define AR2315_ISR_IR_RSVD	0x00000100	/* IR */
+
+#define AR2315_GISR_MISC	0x00000001	/* Misc */
+#define AR2315_GISR_WLAN0	0x00000002	/* WLAN0 */
+#define AR2315_GISR_MPEGTS_RSVD	0x00000004	/* MPEG-TS */
+#define AR2315_GISR_LOCALPCI	0x00000008	/* Local/PCI bus */
+#define AR2315_GISR_WMACPOLL	0x00000010
+#define AR2315_GISR_TIMER	0x00000020
+#define AR2315_GISR_ETHERNET	0x00000040	/* Ethernet */
+
+/* Generic timer */
+#define AR2315_TIMER			0x0030
+#define AR2315_RELOAD			0x0034
+
+/* Watchdog timer */
+#define AR2315_WDT_TIMER		0x0038
+#define AR2315_WDT_CTRL			0x003c
+
+#define AR2315_WDT_CTRL_IGNORE	0x00000000	/* ignore expiration */
+#define AR2315_WDT_CTRL_NMI	0x00000001	/* NMI on watchdog */
+#define AR2315_WDT_CTRL_RESET	0x00000002	/* reset on watchdog */
+
+/* CPU Performance Counters */
+#define AR2315_PERFCNT0			0x0048
+#define AR2315_PERFCNT1			0x004c
+
+#define AR2315_PERF0_DATAHIT	0x00000001  /* Count Data Cache Hits */
+#define AR2315_PERF0_DATAMISS	0x00000002  /* Count Data Cache Misses */
+#define AR2315_PERF0_INSTHIT	0x00000004  /* Count Instruction Cache Hits */
+#define AR2315_PERF0_INSTMISS	0x00000008  /* Count Instruction Cache Misses */
+#define AR2315_PERF0_ACTIVE	0x00000010  /* Count Active Processor Cycles */
+#define AR2315_PERF0_WBHIT	0x00000020  /* Count CPU Write Buffer Hits */
+#define AR2315_PERF0_WBMISS	0x00000040  /* Count CPU Write Buffer Misses */
+
+#define AR2315_PERF1_EB_ARDY	0x00000001  /* Count EB_ARdy signal */
+#define AR2315_PERF1_EB_AVALID	0x00000002  /* Count EB_AValid signal */
+#define AR2315_PERF1_EB_WDRDY	0x00000004  /* Count EB_WDRdy signal */
+#define AR2315_PERF1_EB_RDVAL	0x00000008  /* Count EB_RdVal signal */
+#define AR2315_PERF1_VRADDR	0x00000010  /* Count valid read address cycles*/
+#define AR2315_PERF1_VWADDR	0x00000020  /* Count valid write address cycl.*/
+#define AR2315_PERF1_VWDATA	0x00000040  /* Count valid write data cycles */
+
+/* AHB Error Reporting */
+#define AR2315_AHB_ERR0			0x0050  /* error  */
+#define AR2315_AHB_ERR1			0x0054  /* haddr  */
+#define AR2315_AHB_ERR2			0x0058  /* hwdata */
+#define AR2315_AHB_ERR3			0x005c  /* hrdata */
+#define AR2315_AHB_ERR4			0x0060  /* status */
+
+#define AR2315_AHB_ERROR_DET	1 /* AHB Error has been detected,          */
+				  /* write 1 to clear all bits in ERR0     */
+#define AR2315_AHB_ERROR_OVR	2 /* AHB Error overflow has been detected  */
+#define AR2315_AHB_ERROR_WDT	4 /* AHB Error due to wdt instead of hresp */
+
+#define AR2315_PROCERR_HMAST		0x0000000f
+#define AR2315_PROCERR_HMAST_DFLT	0
+#define AR2315_PROCERR_HMAST_WMAC	1
+#define AR2315_PROCERR_HMAST_ENET	2
+#define AR2315_PROCERR_HMAST_PCIENDPT	3
+#define AR2315_PROCERR_HMAST_LOCAL	4
+#define AR2315_PROCERR_HMAST_CPU	5
+#define AR2315_PROCERR_HMAST_PCITGT	6
+#define AR2315_PROCERR_HMAST_S		0
+#define AR2315_PROCERR_HWRITE		0x00000010
+#define AR2315_PROCERR_HSIZE		0x00000060
+#define AR2315_PROCERR_HSIZE_S		5
+#define AR2315_PROCERR_HTRANS		0x00000180
+#define AR2315_PROCERR_HTRANS_S		7
+#define AR2315_PROCERR_HBURST		0x00000e00
+#define AR2315_PROCERR_HBURST_S		9
+
+/* Clock Control */
+#define AR2315_PLLC_CTL			0x0064
+#define AR2315_PLLV_CTL			0x0068
+#define AR2315_CPUCLK			0x006c
+#define AR2315_AMBACLK			0x0070
+#define AR2315_SYNCCLK			0x0074
+#define AR2315_DSL_SLEEP_CTL		0x0080
+#define AR2315_DSL_SLEEP_DUR		0x0084
+
+/* PLLc Control fields */
+#define AR2315_PLLC_REF_DIV_M		0x00000003
+#define AR2315_PLLC_REF_DIV_S		0
+#define AR2315_PLLC_FDBACK_DIV_M	0x0000007c
+#define AR2315_PLLC_FDBACK_DIV_S	2
+#define AR2315_PLLC_ADD_FDBACK_DIV_M	0x00000080
+#define AR2315_PLLC_ADD_FDBACK_DIV_S	7
+#define AR2315_PLLC_CLKC_DIV_M		0x0001c000
+#define AR2315_PLLC_CLKC_DIV_S		14
+#define AR2315_PLLC_CLKM_DIV_M		0x00700000
+#define AR2315_PLLC_CLKM_DIV_S		20
+
+/* CPU CLK Control fields */
+#define AR2315_CPUCLK_CLK_SEL_M		0x00000003
+#define AR2315_CPUCLK_CLK_SEL_S		0
+#define AR2315_CPUCLK_CLK_DIV_M		0x0000000c
+#define AR2315_CPUCLK_CLK_DIV_S		2
+
+/* AMBA CLK Control fields */
+#define AR2315_AMBACLK_CLK_SEL_M	0x00000003
+#define AR2315_AMBACLK_CLK_SEL_S	0
+#define AR2315_AMBACLK_CLK_DIV_M	0x0000000c
+#define AR2315_AMBACLK_CLK_DIV_S	2
+
+/* PCI Clock Control */
+#define AR2315_PCICLK			0x00a4
+
+#define AR2315_PCICLK_INPUT_M		0x00000003
+#define AR2315_PCICLK_INPUT_S		0
+#define AR2315_PCICLK_PLLC_CLKM		0
+#define AR2315_PCICLK_PLLC_CLKM1	1
+#define AR2315_PCICLK_PLLC_CLKC		2
+#define AR2315_PCICLK_REF_CLK		3
+#define AR2315_PCICLK_DIV_M		0x0000000c
+#define AR2315_PCICLK_DIV_S		2
+#define AR2315_PCICLK_IN_FREQ		0
+#define AR2315_PCICLK_IN_FREQ_DIV_6	1
+#define AR2315_PCICLK_IN_FREQ_DIV_8	2
+#define AR2315_PCICLK_IN_FREQ_DIV_10	3
+
+/* Observation Control Register */
+#define AR2315_OCR			0x00b0
+
+#define AR2315_OCR_GPIO0_IRIN		0x00000040
+#define AR2315_OCR_GPIO1_IROUT		0x00000080
+#define AR2315_OCR_GPIO3_RXCLR		0x00000200
+
+/* General Clock Control */
+#define AR2315_MISCCLK			0x00b4
+
+#define AR2315_MISCCLK_PLLBYPASS_EN	0x00000001
+#define AR2315_MISCCLK_PROCREFCLK	0x00000002
+
+/*
+ * SDRAM Controller
+ *   - No read or write buffers are included.
+ */
+#define AR2315_MEM_CFG			0x0000
+#define AR2315_MEM_CTRL			0x000c
+#define AR2315_MEM_REF			0x0010
+
+#define AR2315_MEM_CFG_DATA_WIDTH_M	0x00006000
+#define AR2315_MEM_CFG_DATA_WIDTH_S	13
+#define AR2315_MEM_CFG_COL_WIDTH_M	0x00001e00
+#define AR2315_MEM_CFG_COL_WIDTH_S	9
+#define AR2315_MEM_CFG_ROW_WIDTH_M	0x000001e0
+#define AR2315_MEM_CFG_ROW_WIDTH_S	5
+#define AR2315_MEM_CFG_BANKADDR_BITS_M	0x00000018
+#define AR2315_MEM_CFG_BANKADDR_BITS_S	3
+
+/*
+ * Local Bus Interface Registers
+ */
+#define AR2315_LB_CONFIG		0x0000
+
+#define AR2315_LBCONF_OE	0x00000001	/* =1 OE is low-true */
+#define AR2315_LBCONF_CS0	0x00000002	/* =1 first CS is low-true */
+#define AR2315_LBCONF_CS1	0x00000004	/* =1 2nd CS is low-true */
+#define AR2315_LBCONF_RDY	0x00000008	/* =1 RDY is low-true */
+#define AR2315_LBCONF_WE	0x00000010	/* =1 Write En is low-true */
+#define AR2315_LBCONF_WAIT	0x00000020	/* =1 WAIT is low-true */
+#define AR2315_LBCONF_ADS	0x00000040	/* =1 Adr Strobe is low-true */
+#define AR2315_LBCONF_MOT	0x00000080	/* =0 Intel, =1 Motorola */
+#define AR2315_LBCONF_8CS	0x00000100	/* =1 8 bits CS, 0= 16bits */
+#define AR2315_LBCONF_8DS	0x00000200	/* =1 8 bits Data S, 0=16bits */
+#define AR2315_LBCONF_ADS_EN	0x00000400	/* =1 Enable ADS */
+#define AR2315_LBCONF_ADR_OE	0x00000800	/* =1 Adr cap on OE, WE or DS */
+#define AR2315_LBCONF_ADDT_MUX	0x00001000	/* =1 Adr and Data share bus */
+#define AR2315_LBCONF_DATA_OE	0x00002000	/* =1 Data cap on OE, WE, DS */
+#define AR2315_LBCONF_16DATA	0x00004000	/* =1 Data is 16 bits wide */
+#define AR2315_LBCONF_SWAPDT	0x00008000	/* =1 Byte swap data */
+#define AR2315_LBCONF_SYNC	0x00010000	/* =1 Bus synchronous to clk */
+#define AR2315_LBCONF_INT	0x00020000	/* =1 Intr is low true */
+#define AR2315_LBCONF_INT_CTR0	0x00000000	/* GND high-Z, Vdd is high-Z */
+#define AR2315_LBCONF_INT_CTR1	0x00040000	/* GND drive, Vdd is high-Z */
+#define AR2315_LBCONF_INT_CTR2	0x00080000	/* GND high-Z, Vdd drive */
+#define AR2315_LBCONF_INT_CTR3	0x000c0000	/* GND drive, Vdd drive */
+#define AR2315_LBCONF_RDY_WAIT	0x00100000	/* =1 RDY is negative of WAIT */
+#define AR2315_LBCONF_INT_PULSE	0x00200000	/* =1 Interrupt is a pulse */
+#define AR2315_LBCONF_ENABLE	0x00400000	/* =1 Falcon respond to LB */
+
+#define AR2315_LB_CLKSEL		0x0004
+
+#define AR2315_LBCLK_EXT	0x00000001	/* use external clk for lb */
+
+#define AR2315_LB_1MS			0x0008
+
+#define AR2315_LB1MS_MASK	0x0003ffff	/* # of AHB clk cycles in 1ms */
+
+#define AR2315_LB_MISCCFG		0x000c
+
+#define AR2315_LBM_TXD_EN	0x00000001	/* Enable TXD for fragments */
+#define AR2315_LBM_RX_INTEN	0x00000002	/* Enable LB ints on RX ready */
+#define AR2315_LBM_MBOXWR_INTEN	0x00000004	/* Enable LB ints on mbox wr */
+#define AR2315_LBM_MBOXRD_INTEN	0x00000008	/* Enable LB ints on mbox rd */
+#define AR2315_LMB_DESCSWAP_EN	0x00000010	/* Byte swap desc enable */
+#define AR2315_LBM_TIMEOUT_M	0x00ffff80
+#define AR2315_LBM_TIMEOUT_S	7
+#define AR2315_LBM_PORTMUX	0x07000000
+
+#define AR2315_LB_RXTSOFF		0x0010
+
+#define AR2315_LB_TX_CHAIN_EN		0x0100
+
+#define AR2315_LB_TXEN_0	0x00000001
+#define AR2315_LB_TXEN_1	0x00000002
+#define AR2315_LB_TXEN_2	0x00000004
+#define AR2315_LB_TXEN_3	0x00000008
+
+#define AR2315_LB_TX_CHAIN_DIS		0x0104
+#define AR2315_LB_TX_DESC_PTR		0x0200
+
+#define AR2315_LB_RX_CHAIN_EN		0x0400
+
+#define AR2315_LB_RXEN		0x00000001
+
+#define AR2315_LB_RX_CHAIN_DIS		0x0404
+#define AR2315_LB_RX_DESC_PTR		0x0408
+
+#define AR2315_LB_INT_STATUS		0x0500
+
+#define AR2315_LB_INT_TX_DESC		0x00000001
+#define AR2315_LB_INT_TX_OK		0x00000002
+#define AR2315_LB_INT_TX_ERR		0x00000004
+#define AR2315_LB_INT_TX_EOF		0x00000008
+#define AR2315_LB_INT_RX_DESC		0x00000010
+#define AR2315_LB_INT_RX_OK		0x00000020
+#define AR2315_LB_INT_RX_ERR		0x00000040
+#define AR2315_LB_INT_RX_EOF		0x00000080
+#define AR2315_LB_INT_TX_TRUNC		0x00000100
+#define AR2315_LB_INT_TX_STARVE		0x00000200
+#define AR2315_LB_INT_LB_TIMEOUT	0x00000400
+#define AR2315_LB_INT_LB_ERR		0x00000800
+#define AR2315_LB_INT_MBOX_WR		0x00001000
+#define AR2315_LB_INT_MBOX_RD		0x00002000
+
+/* Bit definitions for INT MASK are the same as INT_STATUS */
+#define AR2315_LB_INT_MASK		0x0504
+
+#define AR2315_LB_INT_EN		0x0508
+#define AR2315_LB_MBOX			0x0600
+
+#endif /* __ASM_MACH_ATH25_AR2315_REGS_H */
diff --git a/arch/mips/ath25/ar5312.c b/arch/mips/ath25/ar5312.c
new file mode 100644
index 000000000..cfa103518
--- /dev/null
+++ b/arch/mips/ath25/ar5312.c
@@ -0,0 +1,390 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc.,  All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2012 Alexandros C. Couloumbis <alex@ozo.com>
+ */
+
+/*
+ * Platform devices for Atheros AR5312 SoCs
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+#include <linux/irqdomain.h>
+#include <linux/interrupt.h>
+#include <linux/memblock.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/reboot.h>
+#include <asm/bootinfo.h>
+#include <asm/reboot.h>
+#include <asm/time.h>
+
+#include <ath25_platform.h>
+
+#include "devices.h"
+#include "ar5312.h"
+#include "ar5312_regs.h"
+
+static void __iomem *ar5312_rst_base;
+static struct irq_domain *ar5312_misc_irq_domain;
+
+static inline u32 ar5312_rst_reg_read(u32 reg)
+{
+	return __raw_readl(ar5312_rst_base + reg);
+}
+
+static inline void ar5312_rst_reg_write(u32 reg, u32 val)
+{
+	__raw_writel(val, ar5312_rst_base + reg);
+}
+
+static inline void ar5312_rst_reg_mask(u32 reg, u32 mask, u32 val)
+{
+	u32 ret = ar5312_rst_reg_read(reg);
+
+	ret &= ~mask;
+	ret |= val;
+	ar5312_rst_reg_write(reg, ret);
+}
+
+static irqreturn_t ar5312_ahb_err_handler(int cpl, void *dev_id)
+{
+	u32 proc1 = ar5312_rst_reg_read(AR5312_PROC1);
+	u32 proc_addr = ar5312_rst_reg_read(AR5312_PROCADDR); /* clears error */
+	u32 dma1 = ar5312_rst_reg_read(AR5312_DMA1);
+	u32 dma_addr = ar5312_rst_reg_read(AR5312_DMAADDR);   /* clears error */
+
+	pr_emerg("AHB interrupt: PROCADDR=0x%8.8x PROC1=0x%8.8x DMAADDR=0x%8.8x DMA1=0x%8.8x\n",
+		 proc_addr, proc1, dma_addr, dma1);
+
+	machine_restart("AHB error"); /* Catastrophic failure */
+	return IRQ_HANDLED;
+}
+
+static void ar5312_misc_irq_handler(struct irq_desc *desc)
+{
+	u32 pending = ar5312_rst_reg_read(AR5312_ISR) &
+		      ar5312_rst_reg_read(AR5312_IMR);
+	unsigned nr;
+	int ret = 0;
+
+	if (pending) {
+		struct irq_domain *domain = irq_desc_get_handler_data(desc);
+
+		nr = __ffs(pending);
+
+		ret = generic_handle_domain_irq(domain, nr);
+		if (nr == AR5312_MISC_IRQ_TIMER)
+			ar5312_rst_reg_read(AR5312_TIMER);
+	}
+
+	if (!pending || ret)
+		spurious_interrupt();
+}
+
+/* Enable the specified AR5312_MISC_IRQ interrupt */
+static void ar5312_misc_irq_unmask(struct irq_data *d)
+{
+	ar5312_rst_reg_mask(AR5312_IMR, 0, BIT(d->hwirq));
+}
+
+/* Disable the specified AR5312_MISC_IRQ interrupt */
+static void ar5312_misc_irq_mask(struct irq_data *d)
+{
+	ar5312_rst_reg_mask(AR5312_IMR, BIT(d->hwirq), 0);
+	ar5312_rst_reg_read(AR5312_IMR); /* flush write buffer */
+}
+
+static struct irq_chip ar5312_misc_irq_chip = {
+	.name		= "ar5312-misc",
+	.irq_unmask	= ar5312_misc_irq_unmask,
+	.irq_mask	= ar5312_misc_irq_mask,
+};
+
+static int ar5312_misc_irq_map(struct irq_domain *d, unsigned irq,
+			       irq_hw_number_t hw)
+{
+	irq_set_chip_and_handler(irq, &ar5312_misc_irq_chip, handle_level_irq);
+	return 0;
+}
+
+static const struct irq_domain_ops ar5312_misc_irq_domain_ops = {
+	.map = ar5312_misc_irq_map,
+};
+
+static void ar5312_irq_dispatch(void)
+{
+	u32 pending = read_c0_status() & read_c0_cause();
+
+	if (pending & CAUSEF_IP2)
+		do_IRQ(AR5312_IRQ_WLAN0);
+	else if (pending & CAUSEF_IP5)
+		do_IRQ(AR5312_IRQ_WLAN1);
+	else if (pending & CAUSEF_IP6)
+		do_IRQ(AR5312_IRQ_MISC);
+	else if (pending & CAUSEF_IP7)
+		do_IRQ(ATH25_IRQ_CPU_CLOCK);
+	else
+		spurious_interrupt();
+}
+
+void __init ar5312_arch_init_irq(void)
+{
+	struct irq_domain *domain;
+	unsigned irq;
+
+	ath25_irq_dispatch = ar5312_irq_dispatch;
+
+	domain = irq_domain_add_linear(NULL, AR5312_MISC_IRQ_COUNT,
+				       &ar5312_misc_irq_domain_ops, NULL);
+	if (!domain)
+		panic("Failed to add IRQ domain");
+
+	irq = irq_create_mapping(domain, AR5312_MISC_IRQ_AHB_PROC);
+	if (request_irq(irq, ar5312_ahb_err_handler, 0, "ar5312-ahb-error",
+			NULL))
+		pr_err("Failed to register ar5312-ahb-error interrupt\n");
+
+	irq_set_chained_handler_and_data(AR5312_IRQ_MISC,
+					 ar5312_misc_irq_handler, domain);
+
+	ar5312_misc_irq_domain = domain;
+}
+
+static struct physmap_flash_data ar5312_flash_data = {
+	.width = 2,
+};
+
+static struct resource ar5312_flash_resource = {
+	.start = AR5312_FLASH_BASE,
+	.end = AR5312_FLASH_BASE + AR5312_FLASH_SIZE - 1,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ar5312_physmap_flash = {
+	.name = "physmap-flash",
+	.id = 0,
+	.dev.platform_data = &ar5312_flash_data,
+	.resource = &ar5312_flash_resource,
+	.num_resources = 1,
+};
+
+static void __init ar5312_flash_init(void)
+{
+	void __iomem *flashctl_base;
+	u32 ctl;
+
+	flashctl_base = ioremap(AR5312_FLASHCTL_BASE,
+					AR5312_FLASHCTL_SIZE);
+
+	ctl = __raw_readl(flashctl_base + AR5312_FLASHCTL0);
+	ctl &= AR5312_FLASHCTL_MW;
+
+	/* fixup flash width */
+	switch (ctl) {
+	case AR5312_FLASHCTL_MW16:
+		ar5312_flash_data.width = 2;
+		break;
+	case AR5312_FLASHCTL_MW8:
+	default:
+		ar5312_flash_data.width = 1;
+		break;
+	}
+
+	/*
+	 * Configure flash bank 0.
+	 * Assume 8M window size. Flash will be aliased if it's smaller
+	 */
+	ctl |= AR5312_FLASHCTL_E | AR5312_FLASHCTL_AC_8M | AR5312_FLASHCTL_RBLE;
+	ctl |= 0x01 << AR5312_FLASHCTL_IDCY_S;
+	ctl |= 0x07 << AR5312_FLASHCTL_WST1_S;
+	ctl |= 0x07 << AR5312_FLASHCTL_WST2_S;
+	__raw_writel(ctl, flashctl_base + AR5312_FLASHCTL0);
+
+	/* Disable other flash banks */
+	ctl = __raw_readl(flashctl_base + AR5312_FLASHCTL1);
+	ctl &= ~(AR5312_FLASHCTL_E | AR5312_FLASHCTL_AC);
+	__raw_writel(ctl, flashctl_base + AR5312_FLASHCTL1);
+	ctl = __raw_readl(flashctl_base + AR5312_FLASHCTL2);
+	ctl &= ~(AR5312_FLASHCTL_E | AR5312_FLASHCTL_AC);
+	__raw_writel(ctl, flashctl_base + AR5312_FLASHCTL2);
+
+	iounmap(flashctl_base);
+}
+
+void __init ar5312_init_devices(void)
+{
+	struct ath25_boarddata *config;
+
+	ar5312_flash_init();
+
+	/* Locate board/radio config data */
+	ath25_find_config(AR5312_FLASH_BASE, AR5312_FLASH_SIZE);
+	config = ath25_board.config;
+
+	/* AR2313 has CPU minor rev. 10 */
+	if ((current_cpu_data.processor_id & 0xff) == 0x0a)
+		ath25_soc = ATH25_SOC_AR2313;
+
+	/* AR2312 shares the same Silicon ID as AR5312 */
+	else if (config->flags & BD_ISCASPER)
+		ath25_soc = ATH25_SOC_AR2312;
+
+	/* Everything else is probably AR5312 or compatible */
+	else
+		ath25_soc = ATH25_SOC_AR5312;
+
+	platform_device_register(&ar5312_physmap_flash);
+
+	switch (ath25_soc) {
+	case ATH25_SOC_AR5312:
+		if (!ath25_board.radio)
+			return;
+
+		if (!(config->flags & BD_WLAN0))
+			break;
+
+		ath25_add_wmac(0, AR5312_WLAN0_BASE, AR5312_IRQ_WLAN0);
+		break;
+	case ATH25_SOC_AR2312:
+	case ATH25_SOC_AR2313:
+		if (!ath25_board.radio)
+			return;
+		break;
+	default:
+		break;
+	}
+
+	if (config->flags & BD_WLAN1)
+		ath25_add_wmac(1, AR5312_WLAN1_BASE, AR5312_IRQ_WLAN1);
+}
+
+static void ar5312_restart(char *command)
+{
+	/* reset the system */
+	local_irq_disable();
+	while (1)
+		ar5312_rst_reg_write(AR5312_RESET, AR5312_RESET_SYSTEM);
+}
+
+/*
+ * This table is indexed by bits 5..4 of the CLOCKCTL1 register
+ * to determine the predevisor value.
+ */
+static unsigned clockctl1_predivide_table[4] __initdata = { 1, 2, 4, 5 };
+
+static unsigned __init ar5312_cpu_frequency(void)
+{
+	u32 scratch, devid, clock_ctl1;
+	u32 predivide_mask, multiplier_mask, doubler_mask;
+	unsigned predivide_shift, multiplier_shift;
+	unsigned predivide_select, predivisor, multiplier;
+
+	/* Trust the bootrom's idea of cpu frequency. */
+	scratch = ar5312_rst_reg_read(AR5312_SCRATCH);
+	if (scratch)
+		return scratch;
+
+	devid = ar5312_rst_reg_read(AR5312_REV);
+	devid = (devid & AR5312_REV_MAJ) >> AR5312_REV_MAJ_S;
+	if (devid == AR5312_REV_MAJ_AR2313) {
+		predivide_mask = AR2313_CLOCKCTL1_PREDIVIDE_MASK;
+		predivide_shift = AR2313_CLOCKCTL1_PREDIVIDE_SHIFT;
+		multiplier_mask = AR2313_CLOCKCTL1_MULTIPLIER_MASK;
+		multiplier_shift = AR2313_CLOCKCTL1_MULTIPLIER_SHIFT;
+		doubler_mask = AR2313_CLOCKCTL1_DOUBLER_MASK;
+	} else { /* AR5312 and AR2312 */
+		predivide_mask = AR5312_CLOCKCTL1_PREDIVIDE_MASK;
+		predivide_shift = AR5312_CLOCKCTL1_PREDIVIDE_SHIFT;
+		multiplier_mask = AR5312_CLOCKCTL1_MULTIPLIER_MASK;
+		multiplier_shift = AR5312_CLOCKCTL1_MULTIPLIER_SHIFT;
+		doubler_mask = AR5312_CLOCKCTL1_DOUBLER_MASK;
+	}
+
+	/*
+	 * Clocking is derived from a fixed 40MHz input clock.
+	 *
+	 *  cpu_freq = input_clock * MULT (where MULT is PLL multiplier)
+	 *  sys_freq = cpu_freq / 4	  (used for APB clock, serial,
+	 *				   flash, Timer, Watchdog Timer)
+	 *
+	 *  cnt_freq = cpu_freq / 2	  (use for CPU count/compare)
+	 *
+	 * So, for example, with a PLL multiplier of 5, we have
+	 *
+	 *  cpu_freq = 200MHz
+	 *  sys_freq = 50MHz
+	 *  cnt_freq = 100MHz
+	 *
+	 * We compute the CPU frequency, based on PLL settings.
+	 */
+
+	clock_ctl1 = ar5312_rst_reg_read(AR5312_CLOCKCTL1);
+	predivide_select = (clock_ctl1 & predivide_mask) >> predivide_shift;
+	predivisor = clockctl1_predivide_table[predivide_select];
+	multiplier = (clock_ctl1 & multiplier_mask) >> multiplier_shift;
+
+	if (clock_ctl1 & doubler_mask)
+		multiplier <<= 1;
+
+	return (40000000 / predivisor) * multiplier;
+}
+
+static inline unsigned ar5312_sys_frequency(void)
+{
+	return ar5312_cpu_frequency() / 4;
+}
+
+void __init ar5312_plat_time_init(void)
+{
+	mips_hpt_frequency = ar5312_cpu_frequency() / 2;
+}
+
+void __init ar5312_plat_mem_setup(void)
+{
+	void __iomem *sdram_base;
+	u32 memsize, memcfg, bank0_ac, bank1_ac;
+	u32 devid;
+
+	/* Detect memory size */
+	sdram_base = ioremap(AR5312_SDRAMCTL_BASE,
+				     AR5312_SDRAMCTL_SIZE);
+	memcfg = __raw_readl(sdram_base + AR5312_MEM_CFG1);
+	bank0_ac = ATH25_REG_MS(memcfg, AR5312_MEM_CFG1_AC0);
+	bank1_ac = ATH25_REG_MS(memcfg, AR5312_MEM_CFG1_AC1);
+	memsize = (bank0_ac ? (1 << (bank0_ac + 1)) : 0) +
+		  (bank1_ac ? (1 << (bank1_ac + 1)) : 0);
+	memsize <<= 20;
+	memblock_add(0, memsize);
+	iounmap(sdram_base);
+
+	ar5312_rst_base = ioremap(AR5312_RST_BASE, AR5312_RST_SIZE);
+
+	devid = ar5312_rst_reg_read(AR5312_REV);
+	devid >>= AR5312_REV_WMAC_MIN_S;
+	devid &= AR5312_REV_CHIP;
+	ath25_board.devid = (u16)devid;
+
+	/* Clear any lingering AHB errors */
+	ar5312_rst_reg_read(AR5312_PROCADDR);
+	ar5312_rst_reg_read(AR5312_DMAADDR);
+	ar5312_rst_reg_write(AR5312_WDT_CTRL, AR5312_WDT_CTRL_IGNORE);
+
+	_machine_restart = ar5312_restart;
+}
+
+void __init ar5312_arch_init(void)
+{
+	unsigned irq = irq_create_mapping(ar5312_misc_irq_domain,
+					  AR5312_MISC_IRQ_UART0);
+
+	ath25_serial_setup(AR5312_UART0_BASE, irq, ar5312_sys_frequency());
+}
diff --git a/arch/mips/ath25/ar5312.h b/arch/mips/ath25/ar5312.h
new file mode 100644
index 000000000..67518a59a
--- /dev/null
+++ b/arch/mips/ath25/ar5312.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __AR5312_H
+#define __AR5312_H
+
+#ifdef CONFIG_SOC_AR5312
+
+void ar5312_arch_init_irq(void);
+void ar5312_init_devices(void);
+void ar5312_plat_time_init(void);
+void ar5312_plat_mem_setup(void);
+void ar5312_arch_init(void);
+
+#else
+
+static inline void ar5312_arch_init_irq(void) {}
+static inline void ar5312_init_devices(void) {}
+static inline void ar5312_plat_time_init(void) {}
+static inline void ar5312_plat_mem_setup(void) {}
+static inline void ar5312_arch_init(void) {}
+
+#endif
+
+#endif	/* __AR5312_H */
diff --git a/arch/mips/ath25/ar5312_regs.h b/arch/mips/ath25/ar5312_regs.h
new file mode 100644
index 000000000..4b947f967
--- /dev/null
+++ b/arch/mips/ath25/ar5312_regs.h
@@ -0,0 +1,224 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc.,  All Rights Reserved.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ */
+
+#ifndef __ASM_MACH_ATH25_AR5312_REGS_H
+#define __ASM_MACH_ATH25_AR5312_REGS_H
+
+/*
+ * IRQs
+ */
+#define AR5312_IRQ_WLAN0	(MIPS_CPU_IRQ_BASE + 2)	/* C0_CAUSE: 0x0400 */
+#define AR5312_IRQ_ENET0	(MIPS_CPU_IRQ_BASE + 3)	/* C0_CAUSE: 0x0800 */
+#define AR5312_IRQ_ENET1	(MIPS_CPU_IRQ_BASE + 4)	/* C0_CAUSE: 0x1000 */
+#define AR5312_IRQ_WLAN1	(MIPS_CPU_IRQ_BASE + 5)	/* C0_CAUSE: 0x2000 */
+#define AR5312_IRQ_MISC		(MIPS_CPU_IRQ_BASE + 6)	/* C0_CAUSE: 0x4000 */
+
+/*
+ * Miscellaneous interrupts, which share IP6.
+ */
+#define AR5312_MISC_IRQ_TIMER		0
+#define AR5312_MISC_IRQ_AHB_PROC	1
+#define AR5312_MISC_IRQ_AHB_DMA		2
+#define AR5312_MISC_IRQ_GPIO		3
+#define AR5312_MISC_IRQ_UART0		4
+#define AR5312_MISC_IRQ_UART0_DMA	5
+#define AR5312_MISC_IRQ_WATCHDOG	6
+#define AR5312_MISC_IRQ_LOCAL		7
+#define AR5312_MISC_IRQ_SPI		8
+#define AR5312_MISC_IRQ_COUNT		9
+
+/*
+ * Address Map
+ *
+ * The AR5312 supports 2 enet MACS, even though many reference boards only
+ * actually use 1 of them (i.e. Only MAC 0 is actually connected to an enet
+ * PHY or PHY switch. The AR2312 supports 1 enet MAC.
+ */
+#define AR5312_WLAN0_BASE		0x18000000
+#define AR5312_ENET0_BASE		0x18100000
+#define AR5312_ENET1_BASE		0x18200000
+#define AR5312_SDRAMCTL_BASE		0x18300000
+#define AR5312_SDRAMCTL_SIZE		0x00000010
+#define AR5312_FLASHCTL_BASE		0x18400000
+#define AR5312_FLASHCTL_SIZE		0x00000010
+#define AR5312_WLAN1_BASE		0x18500000
+#define AR5312_UART0_BASE		0x1c000000	/* UART MMR */
+#define AR5312_GPIO_BASE		0x1c002000
+#define AR5312_GPIO_SIZE		0x00000010
+#define AR5312_RST_BASE			0x1c003000
+#define AR5312_RST_SIZE			0x00000100
+#define AR5312_FLASH_BASE		0x1e000000
+#define AR5312_FLASH_SIZE		0x00800000
+
+/*
+ * Need these defines to determine true number of ethernet MACs
+ */
+#define AR5312_AR5312_REV2	0x0052		/* AR5312 WMAC (AP31) */
+#define AR5312_AR5312_REV7	0x0057		/* AR5312 WMAC (AP30-040) */
+#define AR5312_AR2313_REV8	0x0058		/* AR2313 WMAC (AP43-030) */
+
+/* Reset/Timer Block Address Map */
+#define AR5312_TIMER		0x0000 /* countdown timer */
+#define AR5312_RELOAD		0x0004 /* timer reload value */
+#define AR5312_WDT_CTRL		0x0008 /* watchdog cntrl */
+#define AR5312_WDT_TIMER	0x000c /* watchdog timer */
+#define AR5312_ISR		0x0010 /* Intr Status Reg */
+#define AR5312_IMR		0x0014 /* Intr Mask Reg */
+#define AR5312_RESET		0x0020
+#define AR5312_CLOCKCTL1	0x0064
+#define AR5312_SCRATCH		0x006c
+#define AR5312_PROCADDR		0x0070
+#define AR5312_PROC1		0x0074
+#define AR5312_DMAADDR		0x0078
+#define AR5312_DMA1		0x007c
+#define AR5312_ENABLE		0x0080 /* interface enb */
+#define AR5312_REV		0x0090 /* revision */
+
+/* AR5312_WDT_CTRL register bit field definitions */
+#define AR5312_WDT_CTRL_IGNORE	0x00000000	/* ignore expiration */
+#define AR5312_WDT_CTRL_NMI	0x00000001
+#define AR5312_WDT_CTRL_RESET	0x00000002
+
+/* AR5312_ISR register bit field definitions */
+#define AR5312_ISR_TIMER	0x00000001
+#define AR5312_ISR_AHBPROC	0x00000002
+#define AR5312_ISR_AHBDMA	0x00000004
+#define AR5312_ISR_GPIO		0x00000008
+#define AR5312_ISR_UART0	0x00000010
+#define AR5312_ISR_UART0DMA	0x00000020
+#define AR5312_ISR_WD		0x00000040
+#define AR5312_ISR_LOCAL	0x00000080
+
+/* AR5312_RESET register bit field definitions */
+#define AR5312_RESET_SYSTEM		0x00000001  /* cold reset full system */
+#define AR5312_RESET_PROC		0x00000002  /* cold reset MIPS core */
+#define AR5312_RESET_WLAN0		0x00000004  /* cold reset WLAN MAC/BB */
+#define AR5312_RESET_EPHY0		0x00000008  /* cold reset ENET0 phy */
+#define AR5312_RESET_EPHY1		0x00000010  /* cold reset ENET1 phy */
+#define AR5312_RESET_ENET0		0x00000020  /* cold reset ENET0 MAC */
+#define AR5312_RESET_ENET1		0x00000040  /* cold reset ENET1 MAC */
+#define AR5312_RESET_UART0		0x00000100  /* cold reset UART0 */
+#define AR5312_RESET_WLAN1		0x00000200  /* cold reset WLAN MAC/BB */
+#define AR5312_RESET_APB		0x00000400  /* cold reset APB ar5312 */
+#define AR5312_RESET_WARM_PROC		0x00001000  /* warm reset MIPS core */
+#define AR5312_RESET_WARM_WLAN0_MAC	0x00002000  /* warm reset WLAN0 MAC */
+#define AR5312_RESET_WARM_WLAN0_BB	0x00004000  /* warm reset WLAN0 BB */
+#define AR5312_RESET_NMI		0x00010000  /* send an NMI to the CPU */
+#define AR5312_RESET_WARM_WLAN1_MAC	0x00020000  /* warm reset WLAN1 MAC */
+#define AR5312_RESET_WARM_WLAN1_BB	0x00040000  /* warm reset WLAN1 BB */
+#define AR5312_RESET_LOCAL_BUS		0x00080000  /* reset local bus */
+#define AR5312_RESET_WDOG		0x00100000  /* last reset was a wdt */
+
+#define AR5312_RESET_WMAC0_BITS		(AR5312_RESET_WLAN0 |\
+					 AR5312_RESET_WARM_WLAN0_MAC |\
+					 AR5312_RESET_WARM_WLAN0_BB)
+
+#define AR5312_RESET_WMAC1_BITS		(AR5312_RESET_WLAN1 |\
+					 AR5312_RESET_WARM_WLAN1_MAC |\
+					 AR5312_RESET_WARM_WLAN1_BB)
+
+/* AR5312_CLOCKCTL1 register bit field definitions */
+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK		0x00000030
+#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT	4
+#define AR5312_CLOCKCTL1_MULTIPLIER_MASK	0x00001f00
+#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT	8
+#define AR5312_CLOCKCTL1_DOUBLER_MASK		0x00010000
+
+/* Valid for AR5312 and AR2312 */
+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK		0x00000030
+#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT	4
+#define AR5312_CLOCKCTL1_MULTIPLIER_MASK	0x00001f00
+#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT	8
+#define AR5312_CLOCKCTL1_DOUBLER_MASK		0x00010000
+
+/* Valid for AR2313 */
+#define AR2313_CLOCKCTL1_PREDIVIDE_MASK		0x00003000
+#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT	12
+#define AR2313_CLOCKCTL1_MULTIPLIER_MASK	0x001f0000
+#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT	16
+#define AR2313_CLOCKCTL1_DOUBLER_MASK		0x00000000
+
+/* AR5312_ENABLE register bit field definitions */
+#define AR5312_ENABLE_WLAN0			0x00000001
+#define AR5312_ENABLE_ENET0			0x00000002
+#define AR5312_ENABLE_ENET1			0x00000004
+#define AR5312_ENABLE_UART_AND_WLAN1_PIO	0x00000008/* UART & WLAN1 PIO */
+#define AR5312_ENABLE_WLAN1_DMA			0x00000010/* WLAN1 DMAs */
+#define AR5312_ENABLE_WLAN1		(AR5312_ENABLE_UART_AND_WLAN1_PIO |\
+					 AR5312_ENABLE_WLAN1_DMA)
+
+/* AR5312_REV register bit field definitions */
+#define AR5312_REV_WMAC_MAJ	0x0000f000
+#define AR5312_REV_WMAC_MAJ_S	12
+#define AR5312_REV_WMAC_MIN	0x00000f00
+#define AR5312_REV_WMAC_MIN_S	8
+#define AR5312_REV_MAJ		0x000000f0
+#define AR5312_REV_MAJ_S	4
+#define AR5312_REV_MIN		0x0000000f
+#define AR5312_REV_MIN_S	0
+#define AR5312_REV_CHIP		(AR5312_REV_MAJ|AR5312_REV_MIN)
+
+/* Major revision numbers, bits 7..4 of Revision ID register */
+#define AR5312_REV_MAJ_AR5312		0x4
+#define AR5312_REV_MAJ_AR2313		0x5
+
+/* Minor revision numbers, bits 3..0 of Revision ID register */
+#define AR5312_REV_MIN_DUAL		0x0	/* Dual WLAN version */
+#define AR5312_REV_MIN_SINGLE		0x1	/* Single WLAN version */
+
+/*
+ * ARM Flash Controller -- 3 flash banks with either x8 or x16 devices
+ */
+#define AR5312_FLASHCTL0	0x0000
+#define AR5312_FLASHCTL1	0x0004
+#define AR5312_FLASHCTL2	0x0008
+
+/* AR5312_FLASHCTL register bit field definitions */
+#define AR5312_FLASHCTL_IDCY	0x0000000f	/* Idle cycle turnaround time */
+#define AR5312_FLASHCTL_IDCY_S	0
+#define AR5312_FLASHCTL_WST1	0x000003e0	/* Wait state 1 */
+#define AR5312_FLASHCTL_WST1_S	5
+#define AR5312_FLASHCTL_RBLE	0x00000400	/* Read byte lane enable */
+#define AR5312_FLASHCTL_WST2	0x0000f800	/* Wait state 2 */
+#define AR5312_FLASHCTL_WST2_S	11
+#define AR5312_FLASHCTL_AC	0x00070000	/* Flash addr check (added) */
+#define AR5312_FLASHCTL_AC_S	16
+#define AR5312_FLASHCTL_AC_128K	0x00000000
+#define AR5312_FLASHCTL_AC_256K	0x00010000
+#define AR5312_FLASHCTL_AC_512K	0x00020000
+#define AR5312_FLASHCTL_AC_1M	0x00030000
+#define AR5312_FLASHCTL_AC_2M	0x00040000
+#define AR5312_FLASHCTL_AC_4M	0x00050000
+#define AR5312_FLASHCTL_AC_8M	0x00060000
+#define AR5312_FLASHCTL_AC_RES	0x00070000	/* 16MB is not supported */
+#define AR5312_FLASHCTL_E	0x00080000	/* Flash bank enable (added) */
+#define AR5312_FLASHCTL_BUSERR	0x01000000	/* Bus transfer error flag */
+#define AR5312_FLASHCTL_WPERR	0x02000000	/* Write protect error flag */
+#define AR5312_FLASHCTL_WP	0x04000000	/* Write protect */
+#define AR5312_FLASHCTL_BM	0x08000000	/* Burst mode */
+#define AR5312_FLASHCTL_MW	0x30000000	/* Mem width */
+#define AR5312_FLASHCTL_MW8	0x00000000	/* Mem width x8 */
+#define AR5312_FLASHCTL_MW16	0x10000000	/* Mem width x16 */
+#define AR5312_FLASHCTL_MW32	0x20000000	/* Mem width x32 (not supp) */
+#define AR5312_FLASHCTL_ATNR	0x00000000	/* Access == no retry */
+#define AR5312_FLASHCTL_ATR	0x80000000	/* Access == retry every */
+#define AR5312_FLASHCTL_ATR4	0xc0000000	/* Access == retry every 4 */
+
+/*
+ * ARM SDRAM Controller -- just enough to determine memory size
+ */
+#define AR5312_MEM_CFG1		0x0004
+
+#define AR5312_MEM_CFG1_AC0_M	0x00000700	/* bank 0: SDRAM addr check */
+#define AR5312_MEM_CFG1_AC0_S	8
+#define AR5312_MEM_CFG1_AC1_M	0x00007000	/* bank 1: SDRAM addr check */
+#define AR5312_MEM_CFG1_AC1_S	12
+
+#endif	/* __ASM_MACH_ATH25_AR5312_REGS_H */
diff --git a/arch/mips/ath25/board.c b/arch/mips/ath25/board.c
new file mode 100644
index 000000000..cb99f9739
--- /dev/null
+++ b/arch/mips/ath25/board.c
@@ -0,0 +1,236 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003 Atheros Communications, Inc.,  All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <asm/irq_cpu.h>
+#include <asm/reboot.h>
+#include <asm/bootinfo.h>
+#include <asm/time.h>
+
+#include <ath25_platform.h>
+#include "devices.h"
+#include "ar5312.h"
+#include "ar2315.h"
+
+void (*ath25_irq_dispatch)(void);
+
+static inline bool check_radio_magic(const void __iomem *addr)
+{
+	addr += 0x7a; /* offset for flash magic */
+	return (__raw_readb(addr) == 0x5a) && (__raw_readb(addr + 1) == 0xa5);
+}
+
+static inline bool check_notempty(const void __iomem *addr)
+{
+	return __raw_readl(addr) != 0xffffffff;
+}
+
+static inline bool check_board_data(const void __iomem *addr, bool broken)
+{
+	/* config magic found */
+	if (__raw_readl(addr) == ATH25_BD_MAGIC)
+		return true;
+
+	if (!broken)
+		return false;
+
+	/* broken board data detected, use radio data to find the
+	 * offset, user will fix this */
+
+	if (check_radio_magic(addr + 0x1000))
+		return true;
+	if (check_radio_magic(addr + 0xf8))
+		return true;
+
+	return false;
+}
+
+static const void __iomem * __init find_board_config(const void __iomem *limit,
+						     const bool broken)
+{
+	const void __iomem *addr;
+	const void __iomem *begin = limit - 0x1000;
+	const void __iomem *end = limit - 0x30000;
+
+	for (addr = begin; addr >= end; addr -= 0x1000)
+		if (check_board_data(addr, broken))
+			return addr;
+
+	return NULL;
+}
+
+static const void __iomem * __init find_radio_config(const void __iomem *limit,
+						     const void __iomem *bcfg)
+{
+	const void __iomem *rcfg, *begin, *end;
+
+	/*
+	 * Now find the start of Radio Configuration data, using heuristics:
+	 * Search forward from Board Configuration data by 0x1000 bytes
+	 * at a time until we find non-0xffffffff.
+	 */
+	begin = bcfg + 0x1000;
+	end = limit;
+	for (rcfg = begin; rcfg < end; rcfg += 0x1000)
+		if (check_notempty(rcfg) && check_radio_magic(rcfg))
+			return rcfg;
+
+	/* AR2316 relocates radio config to new location */
+	begin = bcfg + 0xf8;
+	end = limit - 0x1000 + 0xf8;
+	for (rcfg = begin; rcfg < end; rcfg += 0x1000)
+		if (check_notempty(rcfg) && check_radio_magic(rcfg))
+			return rcfg;
+
+	return NULL;
+}
+
+/*
+ * NB: Search region size could be larger than the actual flash size,
+ * but this shouldn't be a problem here, because the flash
+ * will simply be mapped multiple times.
+ */
+int __init ath25_find_config(phys_addr_t base, unsigned long size)
+{
+	const void __iomem *flash_base, *flash_limit;
+	struct ath25_boarddata *config;
+	unsigned int rcfg_size;
+	int broken_boarddata = 0;
+	const void __iomem *bcfg, *rcfg;
+	u8 *board_data;
+	u8 *radio_data;
+	u8 *mac_addr;
+	u32 offset;
+
+	flash_base = ioremap(base, size);
+	flash_limit = flash_base + size;
+
+	ath25_board.config = NULL;
+	ath25_board.radio = NULL;
+
+	/* Copy the board and radio data to RAM, because accessing the mapped
+	 * memory of the flash directly after booting is not safe */
+
+	/* Try to find valid board and radio data */
+	bcfg = find_board_config(flash_limit, false);
+
+	/* If that fails, try to at least find valid radio data */
+	if (!bcfg) {
+		bcfg = find_board_config(flash_limit, true);
+		broken_boarddata = 1;
+	}
+
+	if (!bcfg) {
+		pr_warn("WARNING: No board configuration data found!\n");
+		goto error;
+	}
+
+	board_data = kzalloc(BOARD_CONFIG_BUFSZ, GFP_KERNEL);
+	if (!board_data)
+		goto error;
+	ath25_board.config = (struct ath25_boarddata *)board_data;
+	memcpy_fromio(board_data, bcfg, 0x100);
+	if (broken_boarddata) {
+		pr_warn("WARNING: broken board data detected\n");
+		config = ath25_board.config;
+		if (is_zero_ether_addr(config->enet0_mac)) {
+			pr_info("Fixing up empty mac addresses\n");
+			config->reset_config_gpio = 0xffff;
+			config->sys_led_gpio = 0xffff;
+			eth_random_addr(config->wlan0_mac);
+			config->wlan0_mac[0] &= ~0x06;
+			eth_random_addr(config->enet0_mac);
+			eth_random_addr(config->enet1_mac);
+		}
+	}
+
+	/* Radio config starts 0x100 bytes after board config, regardless
+	 * of what the physical layout on the flash chip looks like */
+
+	rcfg = find_radio_config(flash_limit, bcfg);
+	if (!rcfg) {
+		pr_warn("WARNING: Could not find Radio Configuration data\n");
+		goto error;
+	}
+
+	radio_data = board_data + 0x100 + ((rcfg - bcfg) & 0xfff);
+	ath25_board.radio = radio_data;
+	offset = radio_data - board_data;
+	pr_info("Radio config found at offset 0x%x (0x%x)\n", rcfg - bcfg,
+		offset);
+	rcfg_size = BOARD_CONFIG_BUFSZ - offset;
+	memcpy_fromio(radio_data, rcfg, rcfg_size);
+
+	mac_addr = &radio_data[0x1d * 2];
+	if (is_broadcast_ether_addr(mac_addr)) {
+		pr_info("Radio MAC is blank; using board-data\n");
+		ether_addr_copy(mac_addr, ath25_board.config->wlan0_mac);
+	}
+
+	iounmap(flash_base);
+
+	return 0;
+
+error:
+	iounmap(flash_base);
+	return -ENODEV;
+}
+
+static void ath25_halt(void)
+{
+	local_irq_disable();
+	unreachable();
+}
+
+void __init plat_mem_setup(void)
+{
+	_machine_halt = ath25_halt;
+	pm_power_off = ath25_halt;
+
+	if (is_ar5312())
+		ar5312_plat_mem_setup();
+	else
+		ar2315_plat_mem_setup();
+
+	/* Disable data watchpoints */
+	write_c0_watchlo0(0);
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+	ath25_irq_dispatch();
+}
+
+void __init plat_time_init(void)
+{
+	if (is_ar5312())
+		ar5312_plat_time_init();
+	else
+		ar2315_plat_time_init();
+}
+
+unsigned int get_c0_compare_int(void)
+{
+	return CP0_LEGACY_COMPARE_IRQ;
+}
+
+void __init arch_init_irq(void)
+{
+	clear_c0_status(ST0_IM);
+	mips_cpu_irq_init();
+
+	/* Initialize interrupt controllers */
+	if (is_ar5312())
+		ar5312_arch_init_irq();
+	else
+		ar2315_arch_init_irq();
+}
diff --git a/arch/mips/ath25/devices.c b/arch/mips/ath25/devices.c
new file mode 100644
index 000000000..301a90282
--- /dev/null
+++ b/arch/mips/ath25/devices.c
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/serial_8250.h>
+#include <linux/platform_device.h>
+#include <asm/bootinfo.h>
+
+#include <ath25_platform.h>
+#include "devices.h"
+#include "ar5312.h"
+#include "ar2315.h"
+
+struct ar231x_board_config ath25_board;
+enum ath25_soc_type ath25_soc = ATH25_SOC_UNKNOWN;
+
+static struct resource ath25_wmac0_res[] = {
+	{
+		.name = "wmac0_membase",
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "wmac0_irq",
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct resource ath25_wmac1_res[] = {
+	{
+		.name = "wmac1_membase",
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.name = "wmac1_irq",
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device ath25_wmac[] = {
+	{
+		.id = 0,
+		.name = "ar231x-wmac",
+		.resource = ath25_wmac0_res,
+		.num_resources = ARRAY_SIZE(ath25_wmac0_res),
+		.dev.platform_data = &ath25_board,
+	},
+	{
+		.id = 1,
+		.name = "ar231x-wmac",
+		.resource = ath25_wmac1_res,
+		.num_resources = ARRAY_SIZE(ath25_wmac1_res),
+		.dev.platform_data = &ath25_board,
+	},
+};
+
+static const char * const soc_type_strings[] = {
+	[ATH25_SOC_AR5312] = "Atheros AR5312",
+	[ATH25_SOC_AR2312] = "Atheros AR2312",
+	[ATH25_SOC_AR2313] = "Atheros AR2313",
+	[ATH25_SOC_AR2315] = "Atheros AR2315",
+	[ATH25_SOC_AR2316] = "Atheros AR2316",
+	[ATH25_SOC_AR2317] = "Atheros AR2317",
+	[ATH25_SOC_AR2318] = "Atheros AR2318",
+	[ATH25_SOC_UNKNOWN] = "Atheros (unknown)",
+};
+
+const char *get_system_type(void)
+{
+	if ((ath25_soc >= ARRAY_SIZE(soc_type_strings)) ||
+	    !soc_type_strings[ath25_soc])
+		return soc_type_strings[ATH25_SOC_UNKNOWN];
+	return soc_type_strings[ath25_soc];
+}
+
+void __init ath25_serial_setup(u32 mapbase, int irq, unsigned int uartclk)
+{
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+	struct uart_port s;
+
+	memset(&s, 0, sizeof(s));
+
+	s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP;
+	s.iotype = UPIO_MEM32;
+	s.irq = irq;
+	s.regshift = 2;
+	s.mapbase = mapbase;
+	s.uartclk = uartclk;
+
+	early_serial_setup(&s);
+#endif /* CONFIG_SERIAL_8250_CONSOLE */
+}
+
+int __init ath25_add_wmac(int nr, u32 base, int irq)
+{
+	struct resource *res;
+
+	ath25_wmac[nr].dev.platform_data = &ath25_board;
+	res = &ath25_wmac[nr].resource[0];
+	res->start = base;
+	res->end = base + 0x10000 - 1;
+	res++;
+	res->start = irq;
+	res->end = irq;
+	return platform_device_register(&ath25_wmac[nr]);
+}
+
+static int __init ath25_register_devices(void)
+{
+	if (is_ar5312())
+		ar5312_init_devices();
+	else
+		ar2315_init_devices();
+
+	return 0;
+}
+
+device_initcall(ath25_register_devices);
+
+static int __init ath25_arch_init(void)
+{
+	if (is_ar5312())
+		ar5312_arch_init();
+	else
+		ar2315_arch_init();
+
+	return 0;
+}
+
+arch_initcall(ath25_arch_init);
diff --git a/arch/mips/ath25/devices.h b/arch/mips/ath25/devices.h
new file mode 100644
index 000000000..44cf69063
--- /dev/null
+++ b/arch/mips/ath25/devices.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ATH25_DEVICES_H
+#define __ATH25_DEVICES_H
+
+#include <linux/cpu.h>
+
+#define ATH25_REG_MS(_val, _field)	(((_val) & _field##_M) >> _field##_S)
+
+#define ATH25_IRQ_CPU_CLOCK	(MIPS_CPU_IRQ_BASE + 7)	/* C0_CAUSE: 0x8000 */
+
+enum ath25_soc_type {
+	/* handled by ar5312.c */
+	ATH25_SOC_AR2312,
+	ATH25_SOC_AR2313,
+	ATH25_SOC_AR5312,
+
+	/* handled by ar2315.c */
+	ATH25_SOC_AR2315,
+	ATH25_SOC_AR2316,
+	ATH25_SOC_AR2317,
+	ATH25_SOC_AR2318,
+
+	ATH25_SOC_UNKNOWN
+};
+
+extern enum ath25_soc_type ath25_soc;
+extern struct ar231x_board_config ath25_board;
+extern void (*ath25_irq_dispatch)(void);
+
+int ath25_find_config(phys_addr_t offset, unsigned long size);
+void ath25_serial_setup(u32 mapbase, int irq, unsigned int uartclk);
+int ath25_add_wmac(int nr, u32 base, int irq);
+
+static inline bool is_ar2315(void)
+{
+	return (current_cpu_data.cputype == CPU_4KEC);
+}
+
+static inline bool is_ar5312(void)
+{
+	return !is_ar2315();
+}
+
+#endif
diff --git a/arch/mips/ath25/early_printk.c b/arch/mips/ath25/early_printk.c
new file mode 100644
index 000000000..d534761e9
--- /dev/null
+++ b/arch/mips/ath25/early_printk.c
@@ -0,0 +1,45 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
+ */
+
+#include <linux/mm.h>
+#include <linux/io.h>
+#include <linux/serial_reg.h>
+#include <asm/setup.h>
+
+#include "devices.h"
+#include "ar2315_regs.h"
+#include "ar5312_regs.h"
+
+static inline void prom_uart_wr(void __iomem *base, unsigned reg,
+				unsigned char ch)
+{
+	__raw_writel(ch, base + 4 * reg);
+}
+
+static inline unsigned char prom_uart_rr(void __iomem *base, unsigned reg)
+{
+	return __raw_readl(base + 4 * reg);
+}
+
+void prom_putchar(char ch)
+{
+	static void __iomem *base;
+
+	if (unlikely(base == NULL)) {
+		if (is_ar2315())
+			base = (void __iomem *)(KSEG1ADDR(AR2315_UART0_BASE));
+		else
+			base = (void __iomem *)(KSEG1ADDR(AR5312_UART0_BASE));
+	}
+
+	while ((prom_uart_rr(base, UART_LSR) & UART_LSR_THRE) == 0)
+		;
+	prom_uart_wr(base, UART_TX, (unsigned char)ch);
+	while ((prom_uart_rr(base, UART_LSR) & UART_LSR_THRE) == 0)
+		;
+}
diff --git a/arch/mips/ath25/prom.c b/arch/mips/ath25/prom.c
new file mode 100644
index 000000000..4466e14fe
--- /dev/null
+++ b/arch/mips/ath25/prom.c
@@ -0,0 +1,22 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright MontaVista Software Inc
+ * Copyright (C) 2003 Atheros Communications, Inc.,  All Rights Reserved.
+ * Copyright (C) 2006 FON Technology, SL.
+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ */
+
+/*
+ * Prom setup file for AR5312/AR231x SoCs
+ */
+
+#include <linux/init.h>
+#include <asm/bootinfo.h>
+
+void __init prom_init(void)
+{
+}