Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

9 files changed, 1089 insertions, 0 deletions

diff --git a/arch/mips/boot/dts/qca/Makefile b/arch/mips/boot/dts/qca/Makefile
new file mode 100644
index 000000000..6749f7706
--- /dev/null
+++ b/arch/mips/boot/dts/qca/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+# All DTBs
+dtb-$(CONFIG_ATH79)			+= ar9132_tl_wr1043nd_v1.dtb
+dtb-$(CONFIG_ATH79)			+= ar9331_dpt_module.dtb
+dtb-$(CONFIG_ATH79)			+= ar9331_dragino_ms14.dtb
+dtb-$(CONFIG_ATH79)			+= ar9331_omega.dtb
+dtb-$(CONFIG_ATH79)			+= ar9331_openembed_som9331_board.dtb
+dtb-$(CONFIG_ATH79)			+= ar9331_tl_mr3020.dtb
diff --git a/arch/mips/boot/dts/qca/ar9132.dtsi b/arch/mips/boot/dts/qca/ar9132.dtsi
new file mode 100644
index 000000000..61dcfa5b6
--- /dev/null
+++ b/arch/mips/boot/dts/qca/ar9132.dtsi
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/ath79-clk.h>
+
+/ {
+	compatible = "qca,ar9132";
+
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "mips,mips24Kc";
+			clocks = <&pll ATH79_CLK_CPU>;
+			reg = <0>;
+		};
+	};
+
+	cpuintc: interrupt-controller {
+		compatible = "qca,ar9132-cpu-intc", "qca,ar7100-cpu-intc";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
+		qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
+					<&ddr_ctrl 0>, <&ddr_ctrl 1>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		ranges;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		interrupt-parent = <&cpuintc>;
+
+		apb {
+			compatible = "simple-bus";
+			ranges;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			interrupt-parent = <&miscintc>;
+
+			ddr_ctrl: memory-controller@18000000 {
+				compatible = "qca,ar9132-ddr-controller",
+						"qca,ar7240-ddr-controller";
+				reg = <0x18000000 0x100>;
+
+				#qca,ddr-wb-channel-cells = <1>;
+			};
+
+			uart: uart@18020000 {
+				compatible = "ns8250";
+				reg = <0x18020000 0x20>;
+				interrupts = <3>;
+
+				clocks = <&pll ATH79_CLK_AHB>;
+				clock-names = "uart";
+
+				reg-io-width = <4>;
+				reg-shift = <2>;
+				no-loopback-test;
+
+				status = "disabled";
+			};
+
+			gpio: gpio@18040000 {
+				compatible = "qca,ar9132-gpio",
+						"qca,ar7100-gpio";
+				reg = <0x18040000 0x30>;
+				interrupts = <2>;
+
+				ngpios = <22>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			pll: pll-controller@18050000 {
+				compatible = "qca,ar9132-pll",
+						"qca,ar9130-pll";
+				reg = <0x18050000 0x20>;
+
+				clock-names = "ref";
+				/* The board must provides the ref clock */
+
+				#clock-cells = <1>;
+				clock-output-names = "cpu", "ddr", "ahb";
+			};
+
+			wdt: wdt@18060008 {
+				compatible = "qca,ar7130-wdt";
+				reg = <0x18060008 0x8>;
+
+				interrupts = <4>;
+
+				clocks = <&pll ATH79_CLK_AHB>;
+				clock-names = "wdt";
+			};
+
+			miscintc: interrupt-controller@18060010 {
+				compatible = "qca,ar9132-misc-intc",
+					   "qca,ar7100-misc-intc";
+				reg = <0x18060010 0x8>;
+
+				interrupt-parent = <&cpuintc>;
+				interrupts = <6>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+
+			rst: reset-controller@1806001c {
+				compatible = "qca,ar9132-reset",
+						"qca,ar7100-reset";
+				reg = <0x1806001c 0x4>;
+
+				#reset-cells = <1>;
+			};
+		};
+
+		usb: usb@1b000100 {
+			compatible = "qca,ar7100-ehci", "generic-ehci";
+			reg = <0x1b000100 0x100>;
+
+			interrupts = <3>;
+			resets = <&rst 5>;
+
+			has-transaction-translator;
+
+			phy-names = "usb";
+			phys = <&usb_phy>;
+
+			status = "disabled";
+		};
+
+		spi: spi@1f000000 {
+			compatible = "qca,ar9132-spi", "qca,ar7100-spi";
+			reg = <0x1f000000 0x10>;
+
+			clocks = <&pll ATH79_CLK_AHB>;
+			clock-names = "ahb";
+
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	usb_phy: usb-phy {
+		compatible = "qca,ar7100-usb-phy";
+
+		reset-names = "phy", "suspend-override";
+		resets = <&rst 4>, <&rst 3>;
+
+		#phy-cells = <0>;
+
+		status = "disabled";
+	};
+};
diff --git a/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
new file mode 100644
index 000000000..f3dff4009
--- /dev/null
+++ b/arch/mips/boot/dts/qca/ar9132_tl_wr1043nd_v1.dts
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9132.dtsi"
+
+/ {
+	compatible = "tplink,tl-wr1043nd-v1", "qca,ar9132";
+	model = "TP-Link TL-WR1043ND Version 1";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x2000000>;
+	};
+
+	extosc: ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <40000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-0 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+
+		button-1 {
+			label = "qss";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+			debounce-interval = <60>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led@0 {
+			label = "tp-link:green:usb";
+			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led@1 {
+			label = "tp-link:green:system";
+			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led@2 {
+			label = "tp-link:green:qss";
+			gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led@3 {
+			label = "tp-link:green:wlan";
+			gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&uart {
+	status = "okay";
+};
+
+&pll {
+	clocks = <&extosc>;
+};
+
+&usb {
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&spi {
+	status = "okay";
+	num-cs = <1>;
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "s25sl064a";
+		reg = <0>;
+		spi-max-frequency = <25000000>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x000000 0x020000>;
+		};
+
+		partition@1 {
+			label = "firmware";
+			reg = <0x020000 0x7D0000>;
+		};
+
+		partition@2 {
+			label = "art";
+			reg = <0x7F0000 0x010000>;
+			read-only;
+		};
+	};
+};
diff --git a/arch/mips/boot/dts/qca/ar9331.dtsi b/arch/mips/boot/dts/qca/ar9331.dtsi
new file mode 100644
index 000000000..c4102b280
--- /dev/null
+++ b/arch/mips/boot/dts/qca/ar9331.dtsi
@@ -0,0 +1,301 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/clock/ath79-clk.h>
+
+/ {
+	compatible = "qca,ar9331";
+
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "mips,mips24Kc";
+			clocks = <&pll ATH79_CLK_CPU>;
+			reg = <0>;
+		};
+	};
+
+	cpuintc: interrupt-controller {
+		compatible = "qca,ar7100-cpu-intc";
+
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		qca,ddr-wb-channel-interrupts = <2>, <3>;
+		qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>;
+	};
+
+	ref: ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		ranges;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		interrupt-parent = <&cpuintc>;
+
+		apb {
+			compatible = "simple-bus";
+			ranges;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			interrupt-parent = <&miscintc>;
+
+			ddr_ctrl: memory-controller@18000000 {
+				compatible = "qca,ar7240-ddr-controller";
+				reg = <0x18000000 0x100>;
+
+				#qca,ddr-wb-channel-cells = <1>;
+			};
+
+			uart: serial@18020000 {
+				compatible = "qca,ar9330-uart";
+				reg = <0x18020000 0x14>;
+
+				interrupts = <3>;
+
+				clocks = <&ref>;
+				clock-names = "uart";
+
+				status = "disabled";
+			};
+
+			gpio: gpio@18040000 {
+				compatible = "qca,ar7100-gpio";
+				reg = <0x18040000 0x34>;
+				interrupts = <2>;
+
+				ngpios = <30>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+
+				status = "disabled";
+			};
+
+			pll: pll-controller@18050000 {
+				compatible = "qca,ar9330-pll";
+				reg = <0x18050000 0x100>;
+
+				clocks = <&ref>;
+				clock-names = "ref";
+
+				#clock-cells = <1>;
+			};
+
+			miscintc: interrupt-controller@18060010 {
+				compatible = "qca,ar7240-misc-intc";
+				reg = <0x18060010 0x8>;
+
+				interrupt-parent = <&cpuintc>;
+				interrupts = <6>;
+
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+
+			rst: reset-controller@1806001c {
+				compatible = "qca,ar7100-reset";
+				reg = <0x1806001c 0x4>;
+
+				#reset-cells = <1>;
+			};
+		};
+
+		eth0: ethernet@19000000 {
+			compatible = "qca,ar9330-eth";
+			reg = <0x19000000 0x200>;
+			interrupts = <4>;
+
+			resets = <&rst 9>, <&rst 22>;
+			reset-names = "mac", "mdio";
+			clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>;
+			clock-names = "eth", "mdio";
+
+			phy-mode = "mii";
+			phy-handle = <&phy_port4>;
+
+			status = "disabled";
+		};
+
+		eth1: ethernet@1a000000 {
+			compatible = "qca,ar9330-eth";
+			reg = <0x1a000000 0x200>;
+			interrupts = <5>;
+			resets = <&rst 13>, <&rst 23>;
+			reset-names = "mac", "mdio";
+			clocks = <&pll ATH79_CLK_AHB>, <&pll ATH79_CLK_AHB>;
+			clock-names = "eth", "mdio";
+
+			phy-mode = "gmii";
+
+			status = "disabled";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+				pause;
+			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				switch10: switch@10 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compatible = "qca,ar9331-switch";
+					reg = <0x10>;
+					resets = <&rst 8>;
+					reset-names = "switch";
+
+					interrupt-parent = <&miscintc>;
+					interrupts = <12>;
+
+					interrupt-controller;
+					#interrupt-cells = <1>;
+
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						switch_port0: port@0 {
+							reg = <0x0>;
+							label = "cpu";
+							ethernet = <&eth1>;
+
+							phy-mode = "gmii";
+
+							fixed-link {
+								speed = <1000>;
+								full-duplex;
+								pause;
+							};
+						};
+
+						switch_port1: port@1 {
+							reg = <0x1>;
+							phy-handle = <&phy_port0>;
+							phy-mode = "internal";
+
+							status = "disabled";
+						};
+
+						switch_port2: port@2 {
+							reg = <0x2>;
+							phy-handle = <&phy_port1>;
+							phy-mode = "internal";
+
+							status = "disabled";
+						};
+
+						switch_port3: port@3 {
+							reg = <0x3>;
+							phy-handle = <&phy_port2>;
+							phy-mode = "internal";
+
+							status = "disabled";
+						};
+
+						switch_port4: port@4 {
+							reg = <0x4>;
+							phy-handle = <&phy_port3>;
+							phy-mode = "internal";
+
+							status = "disabled";
+						};
+					};
+
+					mdio {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						interrupt-parent = <&switch10>;
+
+						phy_port0: phy@0 {
+							reg = <0x0>;
+							interrupts = <0>;
+							status = "disabled";
+						};
+
+						phy_port1: phy@1 {
+							reg = <0x1>;
+							interrupts = <0>;
+							status = "disabled";
+						};
+
+						phy_port2: phy@2 {
+							reg = <0x2>;
+							interrupts = <0>;
+							status = "disabled";
+						};
+
+						phy_port3: phy@3 {
+							reg = <0x3>;
+							interrupts = <0>;
+							status = "disabled";
+						};
+
+						phy_port4: phy@4 {
+							reg = <0x4>;
+							interrupts = <0>;
+							status = "disabled";
+						};
+					};
+				};
+			};
+		};
+
+		usb: usb@1b000100 {
+			compatible = "chipidea,usb2";
+			reg = <0x1b000000 0x200>;
+
+			interrupts = <3>;
+			resets = <&rst 5>;
+
+			phy-names = "usb-phy";
+			phys = <&usb_phy>;
+
+			status = "disabled";
+		};
+
+		spi: spi@1f000000 {
+			compatible = "qca,ar7100-spi";
+			reg = <0x1f000000 0x10>;
+
+			clocks = <&pll ATH79_CLK_AHB>;
+			clock-names = "ahb";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+	};
+
+	usb_phy: usb-phy {
+		compatible = "qca,ar7100-usb-phy";
+
+		reset-names = "phy", "suspend-override";
+		resets = <&rst 4>, <&rst 3>;
+
+		#phy-cells = <0>;
+
+		status = "disabled";
+	};
+};
diff --git a/arch/mips/boot/dts/qca/ar9331_dpt_module.dts b/arch/mips/boot/dts/qca/ar9331_dpt_module.dts
new file mode 100644
index 000000000..c857cd22f
--- /dev/null
+++ b/arch/mips/boot/dts/qca/ar9331_dpt_module.dts
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "ar9331.dtsi"
+
+/ {
+	model = "DPTechnics DPT-Module";
+	compatible = "dptechnics,dpt-module";
+
+	aliases {
+		serial0 = &uart;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x4000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-0 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ref {
+	clock-frequency = <25000000>;
+};
+
+&uart {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+};
+
+&usb {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&spi {
+	num-chipselects = <1>;
+	status = "okay";
+
+	/* Winbond 25Q128FVSG SPI flash */
+	spiflash: w25q128@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q128", "jedec,spi-nor";
+		spi-max-frequency = <104000000>;
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&switch_port1 {
+	label = "lan0";
+	status = "okay";
+};
+
+&phy_port0 {
+	status = "okay";
+};
+
+&phy_port4 {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts b/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts
new file mode 100644
index 000000000..40e4c5da0
--- /dev/null
+++ b/arch/mips/boot/dts/qca/ar9331_dragino_ms14.dts
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9331.dtsi"
+
+/ {
+	model = "Dragino MS14 (Dragino 2)";
+	compatible = "dragino,ms14";
+
+	aliases {
+		serial0 = &uart;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x4000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		wlan {
+			label = "dragino2:red:wlan";
+			gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		lan {
+			label = "dragino2:red:lan";
+			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		wan {
+			label = "dragino2:red:wan";
+			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		system {
+			label = "dragino2:red:system";
+			gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-0 {
+			label = "jumpstart";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+		};
+
+		button-1 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ref {
+	clock-frequency = <25000000>;
+};
+
+&uart {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+};
+
+&usb {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&spi {
+	num-chipselects = <1>;
+	status = "okay";
+
+	/* Winbond 25Q128BVFG SPI flash */
+	spiflash: w25q128@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q128", "jedec,spi-nor";
+		spi-max-frequency = <104000000>;
+		reg = <0>;
+	};
+};
diff --git a/arch/mips/boot/dts/qca/ar9331_omega.dts b/arch/mips/boot/dts/qca/ar9331_omega.dts
new file mode 100644
index 000000000..ed184d861
--- /dev/null
+++ b/arch/mips/boot/dts/qca/ar9331_omega.dts
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9331.dtsi"
+
+/ {
+	model = "Onion Omega";
+	compatible = "onion,omega";
+
+	aliases {
+		serial0 = &uart;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x4000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		system {
+			label = "onion:amber:system";
+			gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-0 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&ref {
+	clock-frequency = <25000000>;
+};
+
+&uart {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+};
+
+&usb {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&spi {
+	num-chipselects = <1>;
+	status = "okay";
+
+	/* Winbond 25Q128FVSG SPI flash */
+	spiflash: w25q128@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q128", "jedec,spi-nor";
+		spi-max-frequency = <104000000>;
+		reg = <0>;
+	};
+};
diff --git a/arch/mips/boot/dts/qca/ar9331_openembed_som9331_board.dts b/arch/mips/boot/dts/qca/ar9331_openembed_som9331_board.dts
new file mode 100644
index 000000000..dc65ebd60
--- /dev/null
+++ b/arch/mips/boot/dts/qca/ar9331_openembed_som9331_board.dts
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "ar9331.dtsi"
+
+/ {
+	model = "OpenEmbed SOM9331 Board";
+	compatible = "openembed,som9331";
+
+	aliases {
+		serial0 = &uart;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x4000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-0 {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&ref {
+	clock-frequency = <25000000>;
+};
+
+&uart {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+};
+
+&usb {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&spi {
+	num-chipselects = <1>;
+	status = "okay";
+
+	/* Winbond 25Q64FVSIG SPI flash */
+	spiflash: w25q64@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q64", "jedec,spi-nor";
+		spi-max-frequency = <104000000>;
+		reg = <0>;
+	};
+};
+
+&eth0 {
+	status = "okay";
+};
+
+&eth1 {
+	status = "okay";
+};
+
+&switch_port1 {
+	label = "lan0";
+	status = "okay";
+};
+
+&switch_port3 {
+	label = "lan1";
+	status = "okay";
+};
+
+&phy_port0 {
+	status = "okay";
+};
+
+&phy_port2 {
+	status = "okay";
+};
+
+&phy_port4 {
+	status = "okay";
+};
diff --git a/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts b/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts
new file mode 100644
index 000000000..5f424c2cd
--- /dev/null
+++ b/arch/mips/boot/dts/qca/ar9331_tl_mr3020.dts
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9331.dtsi"
+
+/ {
+	model = "TP-Link TL-MR3020";
+	compatible = "tplink,tl-mr3020";
+
+	aliases {
+		serial0 = &uart;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x2000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		wlan {
+			label = "tp-link:green:wlan";
+			gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		lan {
+			label = "tp-link:green:lan";
+			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		wps {
+			label = "tp-link:green:wps";
+			gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led3g {
+			label = "tp-link:green:3g";
+			gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-0 {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		button-1 {
+			label = "sw1";
+			linux,code = <BTN_0>;
+			gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
+		};
+
+		button-2 {
+			label = "sw2";
+			linux,code = <BTN_1>;
+			gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_usb_vbus: reg_usb_vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&ref {
+	clock-frequency = <25000000>;
+};
+
+&uart {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+};
+
+&usb {
+	dr_mode = "host";
+	vbus-supply = <&reg_usb_vbus>;
+	status = "okay";
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&spi {
+	num-chipselects = <1>;
+	status = "okay";
+
+	/* Spansion S25FL032PIF SPI flash */
+	spiflash: s25sl032p@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spansion,s25sl032p", "jedec,spi-nor";
+		spi-max-frequency = <104000000>;
+		reg = <0>;
+	};
+};