Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

21 files changed, 2281 insertions, 0 deletions

diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
new file mode 100644
index 000000000..f9fe15630
--- /dev/null
+++ b/arch/mips/ralink/Kconfig
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: GPL-2.0
+if RALINK
+
+config CLKEVT_RT3352
+	bool
+	depends on SOC_RT305X || SOC_MT7620
+	default y
+	select TIMER_OF
+	select CLKSRC_MMIO
+
+config RALINK_ILL_ACC
+	bool
+	depends on SOC_RT305X
+	default y
+
+config IRQ_INTC
+	bool
+	default y
+	depends on !SOC_MT7621
+
+choice
+	prompt "Ralink SoC selection"
+	default SOC_RT305X
+	help
+	  Select Ralink MIPS SoC type.
+
+	config SOC_RT288X
+		bool "RT288x"
+		select MIPS_AUTO_PFN_OFFSET
+		select MIPS_L1_CACHE_SHIFT_4
+		select HAVE_PCI
+
+	config SOC_RT305X
+		bool "RT305x"
+
+	config SOC_RT3883
+		bool "RT3883"
+		select HAVE_PCI
+
+	config SOC_MT7620
+		bool "MT7620/8"
+		select CPU_MIPSR2_IRQ_VI
+		select HAVE_PCI
+
+	config SOC_MT7621
+		bool "MT7621"
+		select MIPS_CPU_SCACHE
+		select SYS_SUPPORTS_MULTITHREADING
+		select SYS_SUPPORTS_SMP
+		select SYS_SUPPORTS_MIPS_CPS
+		select SYS_SUPPORTS_HIGHMEM
+		select MIPS_GIC
+		select CLKSRC_MIPS_GIC
+		select HAVE_PCI
+		select PCI_DRIVERS_GENERIC
+		select SOC_BUS
+
+		help
+		  The MT7621 system-on-a-chip includes an 880 MHz MIPS1004Kc dual-core CPU,
+		  a 5-port 10/100/1000 switch/PHY and one RGMII.
+endchoice
+
+choice
+	prompt "Devicetree selection"
+	depends on !SOC_MT7621
+	default DTB_RT_NONE
+	help
+	  Select the devicetree.
+
+	config DTB_RT_NONE
+		bool "None"
+
+	config DTB_RT2880_EVAL
+		bool "RT2880 eval kit"
+		depends on SOC_RT288X
+		select BUILTIN_DTB
+
+	config DTB_RT305X_EVAL
+		bool "RT305x eval kit"
+		depends on SOC_RT305X
+		select BUILTIN_DTB
+
+	config DTB_RT3883_EVAL
+		bool "RT3883 eval kit"
+		depends on SOC_RT3883
+		select BUILTIN_DTB
+
+	config DTB_MT7620A_EVAL
+		bool "MT7620A eval kit"
+		depends on SOC_MT7620
+		select BUILTIN_DTB
+
+	config DTB_OMEGA2P
+		bool "Onion Omega2+"
+		depends on SOC_MT7620
+		select BUILTIN_DTB
+
+	config DTB_VOCORE2
+		bool "VoCore2"
+		depends on SOC_MT7620
+		select BUILTIN_DTB
+
+endchoice
+
+endif
diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
new file mode 100644
index 000000000..26fabbdea
--- /dev/null
+++ b/arch/mips/ralink/Makefile
@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# Makefile for the Ralink common stuff
+#
+# Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org>
+# Copyright (C) 2013 John Crispin <john@phrozen.org>
+
+obj-y := prom.o of.o reset.o
+
+ifndef CONFIG_MIPS_GIC
+	obj-y += clk.o timer.o
+endif
+
+obj-$(CONFIG_CLKEVT_RT3352) += cevt-rt3352.o
+
+obj-$(CONFIG_RALINK_ILL_ACC) += ill_acc.o
+
+obj-$(CONFIG_IRQ_INTC) += irq.o
+obj-$(CONFIG_MIPS_GIC) += irq-gic.o timer-gic.o
+
+obj-$(CONFIG_SOC_RT288X) += rt288x.o
+obj-$(CONFIG_SOC_RT305X) += rt305x.o
+obj-$(CONFIG_SOC_RT3883) += rt3883.o
+obj-$(CONFIG_SOC_MT7620) += mt7620.o
+obj-$(CONFIG_SOC_MT7621) += mt7621.o
+
+obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+
+obj-$(CONFIG_DEBUG_FS) += bootrom.o
diff --git a/arch/mips/ralink/Platform b/arch/mips/ralink/Platform
new file mode 100644
index 000000000..02ee07914
--- /dev/null
+++ b/arch/mips/ralink/Platform
@@ -0,0 +1,33 @@
+#
+# Ralink SoC common stuff
+#
+cflags-$(CONFIG_RALINK)		+= -I$(srctree)/arch/mips/include/asm/mach-ralink
+
+#
+# Ralink RT288x
+#
+load-$(CONFIG_SOC_RT288X)	+= 0xffffffff88000000
+cflags-$(CONFIG_SOC_RT288X)	+= -I$(srctree)/arch/mips/include/asm/mach-ralink/rt288x
+
+#
+# Ralink RT305x
+#
+load-$(CONFIG_SOC_RT305X)	+= 0xffffffff80000000
+cflags-$(CONFIG_SOC_RT305X)	+= -I$(srctree)/arch/mips/include/asm/mach-ralink/rt305x
+
+#
+# Ralink RT3883
+#
+load-$(CONFIG_SOC_RT3883)	+= 0xffffffff80000000
+cflags-$(CONFIG_SOC_RT3883)	+= -I$(srctree)/arch/mips/include/asm/mach-ralink/rt3883
+
+#
+# Ralink MT7620
+#
+load-$(CONFIG_SOC_MT7620)	+= 0xffffffff80000000
+cflags-$(CONFIG_SOC_MT7620)	+= -I$(srctree)/arch/mips/include/asm/mach-ralink/mt7620
+
+# Ralink MT7621
+#
+load-$(CONFIG_SOC_MT7621)	+= 0xffffffff80001000
+cflags-$(CONFIG_SOC_MT7621)	+= -I$(srctree)/arch/mips/include/asm/mach-ralink/mt7621
diff --git a/arch/mips/ralink/bootrom.c b/arch/mips/ralink/bootrom.c
new file mode 100644
index 000000000..8c8cc0a81
--- /dev/null
+++ b/arch/mips/ralink/bootrom.c
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *
+ * Copyright (C) 2013 John Crispin <john@phrozen.org>
+ */
+
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+#define BOOTROM_OFFSET	0x10118000
+#define BOOTROM_SIZE	0x8000
+
+static void __iomem *membase = (void __iomem *) KSEG1ADDR(BOOTROM_OFFSET);
+
+static int bootrom_show(struct seq_file *s, void *unused)
+{
+	seq_write(s, membase, BOOTROM_SIZE);
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(bootrom);
+
+static int __init bootrom_setup(void)
+{
+	debugfs_create_file("bootrom", 0444, NULL, NULL, &bootrom_fops);
+	return 0;
+}
+
+postcore_initcall(bootrom_setup);
diff --git a/arch/mips/ralink/cevt-rt3352.c b/arch/mips/ralink/cevt-rt3352.c
new file mode 100644
index 000000000..269d4877d
--- /dev/null
+++ b/arch/mips/ralink/cevt-rt3352.c
@@ -0,0 +1,153 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2013 by John Crispin <john@phrozen.org>
+ */
+
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/interrupt.h>
+#include <linux/reset.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+
+#include <asm/mach-ralink/ralink_regs.h>
+
+#define SYSTICK_FREQ		(50 * 1000)
+
+#define SYSTICK_CONFIG		0x00
+#define SYSTICK_COMPARE		0x04
+#define SYSTICK_COUNT		0x08
+
+/* route systick irq to mips irq 7 instead of the r4k-timer */
+#define CFG_EXT_STK_EN		0x2
+/* enable the counter */
+#define CFG_CNT_EN		0x1
+
+struct systick_device {
+	void __iomem *membase;
+	struct clock_event_device dev;
+	int irq_requested;
+	int freq_scale;
+};
+
+static int systick_set_oneshot(struct clock_event_device *evt);
+static int systick_shutdown(struct clock_event_device *evt);
+
+static int systick_next_event(unsigned long delta,
+				struct clock_event_device *evt)
+{
+	struct systick_device *sdev;
+	u32 count;
+
+	sdev = container_of(evt, struct systick_device, dev);
+	count = ioread32(sdev->membase + SYSTICK_COUNT);
+	count = (count + delta) % SYSTICK_FREQ;
+	iowrite32(count, sdev->membase + SYSTICK_COMPARE);
+
+	return 0;
+}
+
+static void systick_event_handler(struct clock_event_device *dev)
+{
+	/* noting to do here */
+}
+
+static irqreturn_t systick_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *dev = (struct clock_event_device *) dev_id;
+
+	dev->event_handler(dev);
+
+	return IRQ_HANDLED;
+}
+
+static struct systick_device systick = {
+	.dev = {
+		/*
+		 * cevt-r4k uses 300, make sure systick
+		 * gets used if available
+		 */
+		.rating			= 310,
+		.features		= CLOCK_EVT_FEAT_ONESHOT,
+		.set_next_event		= systick_next_event,
+		.set_state_shutdown	= systick_shutdown,
+		.set_state_oneshot	= systick_set_oneshot,
+		.event_handler		= systick_event_handler,
+	},
+};
+
+static int systick_shutdown(struct clock_event_device *evt)
+{
+	struct systick_device *sdev;
+
+	sdev = container_of(evt, struct systick_device, dev);
+
+	if (sdev->irq_requested)
+		free_irq(systick.dev.irq, &systick.dev);
+	sdev->irq_requested = 0;
+	iowrite32(0, systick.membase + SYSTICK_CONFIG);
+
+	return 0;
+}
+
+static int systick_set_oneshot(struct clock_event_device *evt)
+{
+	const char *name = systick.dev.name;
+	struct systick_device *sdev;
+	int irq = systick.dev.irq;
+
+	sdev = container_of(evt, struct systick_device, dev);
+
+	if (!sdev->irq_requested) {
+		if (request_irq(irq, systick_interrupt,
+				IRQF_PERCPU | IRQF_TIMER, name, &systick.dev))
+			pr_err("Failed to request irq %d (%s)\n", irq, name);
+	}
+	sdev->irq_requested = 1;
+	iowrite32(CFG_EXT_STK_EN | CFG_CNT_EN,
+		  systick.membase + SYSTICK_CONFIG);
+
+	return 0;
+}
+
+static int __init ralink_systick_init(struct device_node *np)
+{
+	int ret;
+
+	systick.membase = of_iomap(np, 0);
+	if (!systick.membase)
+		return -ENXIO;
+
+	systick.dev.name = np->name;
+	clockevents_calc_mult_shift(&systick.dev, SYSTICK_FREQ, 60);
+	systick.dev.max_delta_ns = clockevent_delta2ns(0x7fff, &systick.dev);
+	systick.dev.max_delta_ticks = 0x7fff;
+	systick.dev.min_delta_ns = clockevent_delta2ns(0x3, &systick.dev);
+	systick.dev.min_delta_ticks = 0x3;
+	systick.dev.irq = irq_of_parse_and_map(np, 0);
+	if (!systick.dev.irq) {
+		pr_err("%pOFn: request_irq failed", np);
+		return -EINVAL;
+	}
+
+	ret = clocksource_mmio_init(systick.membase + SYSTICK_COUNT, np->name,
+				    SYSTICK_FREQ, 301, 16,
+				    clocksource_mmio_readl_up);
+	if (ret)
+		return ret;
+
+	clockevents_register_device(&systick.dev);
+
+	pr_info("%pOFn: running - mult: %d, shift: %d\n",
+			np, systick.dev.mult, systick.dev.shift);
+
+	return 0;
+}
+
+TIMER_OF_DECLARE(systick, "ralink,cevt-systick", ralink_systick_init);
diff --git a/arch/mips/ralink/clk.c b/arch/mips/ralink/clk.c
new file mode 100644
index 000000000..5b02bb7e0
--- /dev/null
+++ b/arch/mips/ralink/clk.c
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *
+ *  Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2013 John Crispin <john@phrozen.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/export.h>
+#include <linux/clkdev.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+
+#include <asm/time.h>
+
+#include "common.h"
+
+void ralink_clk_add(const char *dev, unsigned long rate)
+{
+	struct clk *clk = clk_register_fixed_rate(NULL, dev, NULL, 0, rate);
+
+	if (!clk)
+		panic("failed to add clock");
+
+	clkdev_create(clk, NULL, "%s", dev);
+}
+
+void __init plat_time_init(void)
+{
+	struct clk *clk;
+
+	ralink_of_remap();
+
+	ralink_clk_init();
+	clk = clk_get_sys("cpu", NULL);
+	if (IS_ERR(clk))
+		panic("unable to get CPU clock, err=%ld", PTR_ERR(clk));
+	pr_info("CPU Clock: %ldMHz\n", clk_get_rate(clk) / 1000000);
+	mips_hpt_frequency = clk_get_rate(clk) / 2;
+	clk_put(clk);
+	timer_probe();
+}
diff --git a/arch/mips/ralink/common.h b/arch/mips/ralink/common.h
new file mode 100644
index 000000000..87fc16751
--- /dev/null
+++ b/arch/mips/ralink/common.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ *
+ * Copyright (C) 2013 John Crispin <john@phrozen.org>
+ */
+
+#ifndef _RALINK_COMMON_H__
+#define _RALINK_COMMON_H__
+
+#define RAMIPS_SYS_TYPE_LEN	32
+
+struct ralink_soc_info {
+	unsigned char sys_type[RAMIPS_SYS_TYPE_LEN];
+	unsigned char *compatible;
+
+	unsigned long mem_base;
+	unsigned long mem_size;
+	unsigned long mem_size_min;
+	unsigned long mem_size_max;
+	void (*mem_detect)(void);
+};
+extern struct ralink_soc_info soc_info;
+
+extern void ralink_of_remap(void);
+
+extern void ralink_clk_init(void);
+extern void ralink_clk_add(const char *dev, unsigned long rate);
+
+extern void ralink_rst_init(void);
+
+extern void __init prom_soc_init(struct ralink_soc_info *soc_info);
+
+__iomem void *plat_of_remap_node(const char *node);
+
+#endif /* _RALINK_COMMON_H__ */
diff --git a/arch/mips/ralink/early_printk.c b/arch/mips/ralink/early_printk.c
new file mode 100644
index 000000000..eb4fac25e
--- /dev/null
+++ b/arch/mips/ralink/early_printk.c
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *
+ *  Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ */
+
+#include <linux/io.h>
+#include <linux/serial_reg.h>
+
+#include <asm/addrspace.h>
+#include <asm/setup.h>
+
+#ifdef CONFIG_SOC_RT288X
+#define EARLY_UART_BASE		0x300c00
+#define CHIPID_BASE		0x300004
+#elif defined(CONFIG_SOC_MT7621)
+#define EARLY_UART_BASE		0x1E000c00
+#define CHIPID_BASE		0x1E000004
+#else
+#define EARLY_UART_BASE		0x10000c00
+#define CHIPID_BASE		0x10000004
+#endif
+
+#define MT7628_CHIP_NAME1	0x20203832
+
+#define UART_REG_TX		0x04
+#define UART_REG_LCR		0x0c
+#define UART_REG_LSR		0x14
+#define UART_REG_LSR_RT2880	0x1c
+
+static __iomem void *uart_membase = (__iomem void *) KSEG1ADDR(EARLY_UART_BASE);
+static __iomem void *chipid_membase = (__iomem void *) KSEG1ADDR(CHIPID_BASE);
+static int init_complete;
+
+static inline void uart_w32(u32 val, unsigned reg)
+{
+	__raw_writel(val, uart_membase + reg);
+}
+
+static inline u32 uart_r32(unsigned reg)
+{
+	return __raw_readl(uart_membase + reg);
+}
+
+static inline int soc_is_mt7628(void)
+{
+	return IS_ENABLED(CONFIG_SOC_MT7620) &&
+		(__raw_readl(chipid_membase) == MT7628_CHIP_NAME1);
+}
+
+static void find_uart_base(void)
+{
+	int i;
+
+	if (!soc_is_mt7628())
+		return;
+
+	for (i = 0; i < 3; i++) {
+		u32 reg = uart_r32(UART_REG_LCR + (0x100 * i));
+
+		if (!reg)
+			continue;
+
+		uart_membase = (__iomem void *) KSEG1ADDR(EARLY_UART_BASE +
+							  (0x100 * i));
+		break;
+	}
+}
+
+void prom_putchar(char ch)
+{
+	if (!init_complete) {
+		find_uart_base();
+		init_complete = 1;
+	}
+
+	if (IS_ENABLED(CONFIG_SOC_MT7621) || soc_is_mt7628()) {
+		uart_w32((unsigned char)ch, UART_TX);
+		while ((uart_r32(UART_REG_LSR) & UART_LSR_THRE) == 0)
+			;
+	} else {
+		while ((uart_r32(UART_REG_LSR_RT2880) & UART_LSR_THRE) == 0)
+			;
+		uart_w32((unsigned char)ch, UART_REG_TX);
+		while ((uart_r32(UART_REG_LSR_RT2880) & UART_LSR_THRE) == 0)
+			;
+	}
+}
diff --git a/arch/mips/ralink/ill_acc.c b/arch/mips/ralink/ill_acc.c
new file mode 100644
index 000000000..f395ae218
--- /dev/null
+++ b/arch/mips/ralink/ill_acc.c
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *
+ * Copyright (C) 2013 John Crispin <john@phrozen.org>
+ */
+
+#include <linux/interrupt.h>
+#include <linux/of_platform.h>
+#include <linux/of_irq.h>
+
+#include <asm/mach-ralink/ralink_regs.h>
+
+#define REG_ILL_ACC_ADDR	0x10
+#define REG_ILL_ACC_TYPE	0x14
+
+#define ILL_INT_STATUS		BIT(31)
+#define ILL_ACC_WRITE		BIT(30)
+#define ILL_ACC_LEN_M		0xff
+#define ILL_ACC_OFF_M		0xf
+#define ILL_ACC_OFF_S		16
+#define ILL_ACC_ID_M		0x7
+#define ILL_ACC_ID_S		8
+
+#define	DRV_NAME		"ill_acc"
+
+static const char * const ill_acc_ids[] = {
+	"cpu", "dma", "ppe", "pdma rx", "pdma tx", "pci/e", "wmac", "usb",
+};
+
+static irqreturn_t ill_acc_irq_handler(int irq, void *_priv)
+{
+	struct device *dev = (struct device *) _priv;
+	u32 addr = rt_memc_r32(REG_ILL_ACC_ADDR);
+	u32 type = rt_memc_r32(REG_ILL_ACC_TYPE);
+
+	dev_err(dev, "illegal %s access from %s - addr:0x%08x offset:%d len:%d\n",
+		(type & ILL_ACC_WRITE) ? ("write") : ("read"),
+		ill_acc_ids[(type >> ILL_ACC_ID_S) & ILL_ACC_ID_M],
+		addr, (type >> ILL_ACC_OFF_S) & ILL_ACC_OFF_M,
+		type & ILL_ACC_LEN_M);
+
+	rt_memc_w32(ILL_INT_STATUS, REG_ILL_ACC_TYPE);
+
+	return IRQ_HANDLED;
+}
+
+static int __init ill_acc_of_setup(void)
+{
+	struct platform_device *pdev;
+	struct device_node *np;
+	int irq;
+
+	/* somehow this driver breaks on RT5350 */
+	if (of_machine_is_compatible("ralink,rt5350-soc"))
+		return -EINVAL;
+
+	np = of_find_compatible_node(NULL, NULL, "ralink,rt3050-memc");
+	if (!np)
+		return -EINVAL;
+
+	pdev = of_find_device_by_node(np);
+	if (!pdev) {
+		pr_err("%pOFn: failed to lookup pdev\n", np);
+		of_node_put(np);
+		return -EINVAL;
+	}
+
+	irq = irq_of_parse_and_map(np, 0);
+	of_node_put(np);
+	if (!irq) {
+		dev_err(&pdev->dev, "failed to get irq\n");
+		put_device(&pdev->dev);
+		return -EINVAL;
+	}
+
+	if (request_irq(irq, ill_acc_irq_handler, 0, "ill_acc", &pdev->dev)) {
+		dev_err(&pdev->dev, "failed to request irq\n");
+		put_device(&pdev->dev);
+		return -EINVAL;
+	}
+
+	rt_memc_w32(ILL_INT_STATUS, REG_ILL_ACC_TYPE);
+
+	dev_info(&pdev->dev, "irq registered\n");
+
+	return 0;
+}
+
+arch_initcall(ill_acc_of_setup);
diff --git a/arch/mips/ralink/irq-gic.c b/arch/mips/ralink/irq-gic.c
new file mode 100644
index 000000000..3bab51a5f
--- /dev/null
+++ b/arch/mips/ralink/irq-gic.c
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *
+ * Copyright (C) 2015 Nikolay Martynov <mar.kolya@gmail.com>
+ * Copyright (C) 2015 John Crispin <john@phrozen.org>
+ */
+
+#include <linux/init.h>
+
+#include <linux/of.h>
+#include <linux/irqchip.h>
+#include <asm/mips-cps.h>
+
+int get_c0_perfcount_int(void)
+{
+	return gic_get_c0_perfcount_int();
+}
+EXPORT_SYMBOL_GPL(get_c0_perfcount_int);
+
+void __init arch_init_irq(void)
+{
+	irqchip_init();
+}
diff --git a/arch/mips/ralink/irq.c b/arch/mips/ralink/irq.c
new file mode 100644
index 000000000..fa353bc13
--- /dev/null
+++ b/arch/mips/ralink/irq.c
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *
+ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2013 John Crispin <john@phrozen.org>
+ */
+
+#include <linux/io.h>
+#include <linux/bitops.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/interrupt.h>
+
+#include <asm/irq_cpu.h>
+#include <asm/mipsregs.h>
+
+#include "common.h"
+
+#define INTC_INT_GLOBAL		BIT(31)
+
+#define RALINK_CPU_IRQ_INTC	(MIPS_CPU_IRQ_BASE + 2)
+#define RALINK_CPU_IRQ_PCI	(MIPS_CPU_IRQ_BASE + 4)
+#define RALINK_CPU_IRQ_FE	(MIPS_CPU_IRQ_BASE + 5)
+#define RALINK_CPU_IRQ_WIFI	(MIPS_CPU_IRQ_BASE + 6)
+#define RALINK_CPU_IRQ_COUNTER	(MIPS_CPU_IRQ_BASE + 7)
+
+/* we have a cascade of 8 irqs */
+#define RALINK_INTC_IRQ_BASE	8
+
+/* we have 32 SoC irqs */
+#define RALINK_INTC_IRQ_COUNT	32
+
+#define RALINK_INTC_IRQ_PERFC   (RALINK_INTC_IRQ_BASE + 9)
+
+enum rt_intc_regs_enum {
+	INTC_REG_STATUS0 = 0,
+	INTC_REG_STATUS1,
+	INTC_REG_TYPE,
+	INTC_REG_RAW_STATUS,
+	INTC_REG_ENABLE,
+	INTC_REG_DISABLE,
+};
+
+static u32 rt_intc_regs[] = {
+	[INTC_REG_STATUS0] = 0x00,
+	[INTC_REG_STATUS1] = 0x04,
+	[INTC_REG_TYPE] = 0x20,
+	[INTC_REG_RAW_STATUS] = 0x30,
+	[INTC_REG_ENABLE] = 0x34,
+	[INTC_REG_DISABLE] = 0x38,
+};
+
+static void __iomem *rt_intc_membase;
+
+static int rt_perfcount_irq;
+
+static inline void rt_intc_w32(u32 val, unsigned reg)
+{
+	__raw_writel(val, rt_intc_membase + rt_intc_regs[reg]);
+}
+
+static inline u32 rt_intc_r32(unsigned reg)
+{
+	return __raw_readl(rt_intc_membase + rt_intc_regs[reg]);
+}
+
+static void ralink_intc_irq_unmask(struct irq_data *d)
+{
+	rt_intc_w32(BIT(d->hwirq), INTC_REG_ENABLE);
+}
+
+static void ralink_intc_irq_mask(struct irq_data *d)
+{
+	rt_intc_w32(BIT(d->hwirq), INTC_REG_DISABLE);
+}
+
+static struct irq_chip ralink_intc_irq_chip = {
+	.name		= "INTC",
+	.irq_unmask	= ralink_intc_irq_unmask,
+	.irq_mask	= ralink_intc_irq_mask,
+	.irq_mask_ack	= ralink_intc_irq_mask,
+};
+
+int get_c0_perfcount_int(void)
+{
+	return rt_perfcount_irq;
+}
+EXPORT_SYMBOL_GPL(get_c0_perfcount_int);
+
+unsigned int get_c0_compare_int(void)
+{
+	return CP0_LEGACY_COMPARE_IRQ;
+}
+
+static void ralink_intc_irq_handler(struct irq_desc *desc)
+{
+	u32 pending = rt_intc_r32(INTC_REG_STATUS0);
+
+	if (pending) {
+		struct irq_domain *domain = irq_desc_get_handler_data(desc);
+		generic_handle_domain_irq(domain, __ffs(pending));
+	} else {
+		spurious_interrupt();
+	}
+}
+
+asmlinkage void plat_irq_dispatch(void)
+{
+	unsigned long pending;
+
+	pending = read_c0_status() & read_c0_cause() & ST0_IM;
+
+	if (pending & STATUSF_IP7)
+		do_IRQ(RALINK_CPU_IRQ_COUNTER);
+
+	else if (pending & STATUSF_IP5)
+		do_IRQ(RALINK_CPU_IRQ_FE);
+
+	else if (pending & STATUSF_IP6)
+		do_IRQ(RALINK_CPU_IRQ_WIFI);
+
+	else if (pending & STATUSF_IP4)
+		do_IRQ(RALINK_CPU_IRQ_PCI);
+
+	else if (pending & STATUSF_IP2)
+		do_IRQ(RALINK_CPU_IRQ_INTC);
+
+	else
+		spurious_interrupt();
+}
+
+static int intc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
+{
+	irq_set_chip_and_handler(irq, &ralink_intc_irq_chip, handle_level_irq);
+
+	return 0;
+}
+
+static const struct irq_domain_ops irq_domain_ops = {
+	.xlate = irq_domain_xlate_onecell,
+	.map = intc_map,
+};
+
+static int __init intc_of_init(struct device_node *node,
+			       struct device_node *parent)
+{
+	struct resource res;
+	struct irq_domain *domain;
+	int irq;
+
+	if (!of_property_read_u32_array(node, "ralink,intc-registers",
+					rt_intc_regs, 6))
+		pr_info("intc: using register map from devicetree\n");
+
+	irq = irq_of_parse_and_map(node, 0);
+	if (!irq)
+		panic("Failed to get INTC IRQ");
+
+	if (of_address_to_resource(node, 0, &res))
+		panic("Failed to get intc memory range");
+
+	if (!request_mem_region(res.start, resource_size(&res),
+				res.name))
+		pr_err("Failed to request intc memory");
+
+	rt_intc_membase = ioremap(res.start,
+					resource_size(&res));
+	if (!rt_intc_membase)
+		panic("Failed to remap intc memory");
+
+	/* disable all interrupts */
+	rt_intc_w32(~0, INTC_REG_DISABLE);
+
+	/* route all INTC interrupts to MIPS HW0 interrupt */
+	rt_intc_w32(0, INTC_REG_TYPE);
+
+	domain = irq_domain_add_legacy(node, RALINK_INTC_IRQ_COUNT,
+			RALINK_INTC_IRQ_BASE, 0, &irq_domain_ops, NULL);
+	if (!domain)
+		panic("Failed to add irqdomain");
+
+	rt_intc_w32(INTC_INT_GLOBAL, INTC_REG_ENABLE);
+
+	irq_set_chained_handler_and_data(irq, ralink_intc_irq_handler, domain);
+
+	/* tell the kernel which irq is used for performance monitoring */
+	rt_perfcount_irq = irq_create_mapping(domain, 9);
+
+	return 0;
+}
+
+static struct of_device_id __initdata of_irq_ids[] = {
+	{ .compatible = "mti,cpu-interrupt-controller", .data = mips_cpu_irq_of_init },
+	{ .compatible = "ralink,rt2880-intc", .data = intc_of_init },
+	{},
+};
+
+void __init arch_init_irq(void)
+{
+	of_irq_init(of_irq_ids);
+}
+
diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
new file mode 100644
index 000000000..ae1fa0391
--- /dev/null
+++ b/arch/mips/ralink/mt7620.c
@@ -0,0 +1,398 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *
+ * Parts of this file are based on Ralink's 2.6.21 BSP
+ *
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2013 John Crispin <john@phrozen.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/bug.h>
+
+#include <asm/mipsregs.h>
+#include <asm/mach-ralink/ralink_regs.h>
+#include <asm/mach-ralink/mt7620.h>
+
+#include "common.h"
+
+/* analog */
+#define PMU0_CFG		0x88
+#define PMU_SW_SET		BIT(28)
+#define A_DCDC_EN		BIT(24)
+#define A_SSC_PERI		BIT(19)
+#define A_SSC_GEN		BIT(18)
+#define A_SSC_M			0x3
+#define A_SSC_S			16
+#define A_DLY_M			0x7
+#define A_DLY_S			8
+#define A_VTUNE_M		0xff
+
+/* digital */
+#define PMU1_CFG		0x8C
+#define DIG_SW_SEL		BIT(25)
+
+/* clock scaling */
+#define CLKCFG_FDIV_MASK	0x1f00
+#define CLKCFG_FDIV_USB_VAL	0x0300
+#define CLKCFG_FFRAC_MASK	0x001f
+#define CLKCFG_FFRAC_USB_VAL	0x0003
+
+/* EFUSE bits */
+#define EFUSE_MT7688		0x100000
+
+/* DRAM type bit */
+#define DRAM_TYPE_MT7628_MASK	0x1
+
+/* does the board have sdram or ddram */
+static int dram_type;
+
+static __init u32
+mt7620_calc_rate(u32 ref_rate, u32 mul, u32 div)
+{
+	u64 t;
+
+	t = ref_rate;
+	t *= mul;
+	do_div(t, div);
+
+	return t;
+}
+
+#define MHZ(x)		((x) * 1000 * 1000)
+
+static __init unsigned long
+mt7620_get_xtal_rate(void)
+{
+	u32 reg;
+
+	reg = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0);
+	if (reg & SYSCFG0_XTAL_FREQ_SEL)
+		return MHZ(40);
+
+	return MHZ(20);
+}
+
+static __init unsigned long
+mt7620_get_periph_rate(unsigned long xtal_rate)
+{
+	u32 reg;
+
+	reg = rt_sysc_r32(SYSC_REG_CLKCFG0);
+	if (reg & CLKCFG0_PERI_CLK_SEL)
+		return xtal_rate;
+
+	return MHZ(40);
+}
+
+static const u32 mt7620_clk_divider[] __initconst = { 2, 3, 4, 8 };
+
+static __init unsigned long
+mt7620_get_cpu_pll_rate(unsigned long xtal_rate)
+{
+	u32 reg;
+	u32 mul;
+	u32 div;
+
+	reg = rt_sysc_r32(SYSC_REG_CPLL_CONFIG0);
+	if (reg & CPLL_CFG0_BYPASS_REF_CLK)
+		return xtal_rate;
+
+	if ((reg & CPLL_CFG0_SW_CFG) == 0)
+		return MHZ(600);
+
+	mul = (reg >> CPLL_CFG0_PLL_MULT_RATIO_SHIFT) &
+	      CPLL_CFG0_PLL_MULT_RATIO_MASK;
+	mul += 24;
+	if (reg & CPLL_CFG0_LC_CURFCK)
+		mul *= 2;
+
+	div = (reg >> CPLL_CFG0_PLL_DIV_RATIO_SHIFT) &
+	      CPLL_CFG0_PLL_DIV_RATIO_MASK;
+
+	WARN_ON(div >= ARRAY_SIZE(mt7620_clk_divider));
+
+	return mt7620_calc_rate(xtal_rate, mul, mt7620_clk_divider[div]);
+}
+
+static __init unsigned long
+mt7620_get_pll_rate(unsigned long xtal_rate, unsigned long cpu_pll_rate)
+{
+	u32 reg;
+
+	reg = rt_sysc_r32(SYSC_REG_CPLL_CONFIG1);
+	if (reg & CPLL_CFG1_CPU_AUX1)
+		return xtal_rate;
+
+	if (reg & CPLL_CFG1_CPU_AUX0)
+		return MHZ(480);
+
+	return cpu_pll_rate;
+}
+
+static __init unsigned long
+mt7620_get_cpu_rate(unsigned long pll_rate)
+{
+	u32 reg;
+	u32 mul;
+	u32 div;
+
+	reg = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG);
+
+	mul = reg & CPU_SYS_CLKCFG_CPU_FFRAC_MASK;
+	div = (reg >> CPU_SYS_CLKCFG_CPU_FDIV_SHIFT) &
+	      CPU_SYS_CLKCFG_CPU_FDIV_MASK;
+
+	return mt7620_calc_rate(pll_rate, mul, div);
+}
+
+static const u32 mt7620_ocp_dividers[16] __initconst = {
+	[CPU_SYS_CLKCFG_OCP_RATIO_2] = 2,
+	[CPU_SYS_CLKCFG_OCP_RATIO_3] = 3,
+	[CPU_SYS_CLKCFG_OCP_RATIO_4] = 4,
+	[CPU_SYS_CLKCFG_OCP_RATIO_5] = 5,
+	[CPU_SYS_CLKCFG_OCP_RATIO_10] = 10,
+};
+
+static __init unsigned long
+mt7620_get_dram_rate(unsigned long pll_rate)
+{
+	if (dram_type == SYSCFG0_DRAM_TYPE_SDRAM)
+		return pll_rate / 4;
+
+	return pll_rate / 3;
+}
+
+static __init unsigned long
+mt7620_get_sys_rate(unsigned long cpu_rate)
+{
+	u32 reg;
+	u32 ocp_ratio;
+	u32 div;
+
+	reg = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG);
+
+	ocp_ratio = (reg >> CPU_SYS_CLKCFG_OCP_RATIO_SHIFT) &
+		    CPU_SYS_CLKCFG_OCP_RATIO_MASK;
+
+	if (WARN_ON(ocp_ratio >= ARRAY_SIZE(mt7620_ocp_dividers)))
+		return cpu_rate;
+
+	div = mt7620_ocp_dividers[ocp_ratio];
+	if (WARN(!div, "invalid divider for OCP ratio %u", ocp_ratio))
+		return cpu_rate;
+
+	return cpu_rate / div;
+}
+
+void __init ralink_clk_init(void)
+{
+	unsigned long xtal_rate;
+	unsigned long cpu_pll_rate;
+	unsigned long pll_rate;
+	unsigned long cpu_rate;
+	unsigned long sys_rate;
+	unsigned long dram_rate;
+	unsigned long periph_rate;
+	unsigned long pcmi2s_rate;
+
+	xtal_rate = mt7620_get_xtal_rate();
+
+#define RFMT(label)	label ":%lu.%03luMHz "
+#define RINT(x)		((x) / 1000000)
+#define RFRAC(x)	(((x) / 1000) % 1000)
+
+	if (is_mt76x8()) {
+		if (xtal_rate == MHZ(40))
+			cpu_rate = MHZ(580);
+		else
+			cpu_rate = MHZ(575);
+		dram_rate = sys_rate = cpu_rate / 3;
+		periph_rate = MHZ(40);
+		pcmi2s_rate = MHZ(480);
+
+		ralink_clk_add("10000d00.uartlite", periph_rate);
+		ralink_clk_add("10000e00.uartlite", periph_rate);
+	} else {
+		cpu_pll_rate = mt7620_get_cpu_pll_rate(xtal_rate);
+		pll_rate = mt7620_get_pll_rate(xtal_rate, cpu_pll_rate);
+
+		cpu_rate = mt7620_get_cpu_rate(pll_rate);
+		dram_rate = mt7620_get_dram_rate(pll_rate);
+		sys_rate = mt7620_get_sys_rate(cpu_rate);
+		periph_rate = mt7620_get_periph_rate(xtal_rate);
+		pcmi2s_rate = periph_rate;
+
+		pr_debug(RFMT("XTAL") RFMT("CPU_PLL") RFMT("PLL"),
+			 RINT(xtal_rate), RFRAC(xtal_rate),
+			 RINT(cpu_pll_rate), RFRAC(cpu_pll_rate),
+			 RINT(pll_rate), RFRAC(pll_rate));
+
+		ralink_clk_add("10000500.uart", periph_rate);
+	}
+
+	pr_debug(RFMT("CPU") RFMT("DRAM") RFMT("SYS") RFMT("PERIPH"),
+		 RINT(cpu_rate), RFRAC(cpu_rate),
+		 RINT(dram_rate), RFRAC(dram_rate),
+		 RINT(sys_rate), RFRAC(sys_rate),
+		 RINT(periph_rate), RFRAC(periph_rate));
+#undef RFRAC
+#undef RINT
+#undef RFMT
+
+	ralink_clk_add("cpu", cpu_rate);
+	ralink_clk_add("10000100.timer", periph_rate);
+	ralink_clk_add("10000120.watchdog", periph_rate);
+	ralink_clk_add("10000900.i2c", periph_rate);
+	ralink_clk_add("10000a00.i2s", pcmi2s_rate);
+	ralink_clk_add("10000b00.spi", sys_rate);
+	ralink_clk_add("10000b40.spi", sys_rate);
+	ralink_clk_add("10000c00.uartlite", periph_rate);
+	ralink_clk_add("10000d00.uart1", periph_rate);
+	ralink_clk_add("10000e00.uart2", periph_rate);
+	ralink_clk_add("10180000.wmac", xtal_rate);
+
+	if (IS_ENABLED(CONFIG_USB) && !is_mt76x8()) {
+		/*
+		 * When the CPU goes into sleep mode, the BUS clock will be
+		 * too low for USB to function properly. Adjust the busses
+		 * fractional divider to fix this
+		 */
+		u32 val = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG);
+
+		val &= ~(CLKCFG_FDIV_MASK | CLKCFG_FFRAC_MASK);
+		val |= CLKCFG_FDIV_USB_VAL | CLKCFG_FFRAC_USB_VAL;
+
+		rt_sysc_w32(val, SYSC_REG_CPU_SYS_CLKCFG);
+	}
+}
+
+void __init ralink_of_remap(void)
+{
+	rt_sysc_membase = plat_of_remap_node("ralink,mt7620a-sysc");
+	rt_memc_membase = plat_of_remap_node("ralink,mt7620a-memc");
+
+	if (!rt_sysc_membase || !rt_memc_membase)
+		panic("Failed to remap core resources");
+}
+
+static __init void
+mt7620_dram_init(struct ralink_soc_info *soc_info)
+{
+	switch (dram_type) {
+	case SYSCFG0_DRAM_TYPE_SDRAM:
+		pr_info("Board has SDRAM\n");
+		soc_info->mem_size_min = MT7620_SDRAM_SIZE_MIN;
+		soc_info->mem_size_max = MT7620_SDRAM_SIZE_MAX;
+		break;
+
+	case SYSCFG0_DRAM_TYPE_DDR1:
+		pr_info("Board has DDR1\n");
+		soc_info->mem_size_min = MT7620_DDR1_SIZE_MIN;
+		soc_info->mem_size_max = MT7620_DDR1_SIZE_MAX;
+		break;
+
+	case SYSCFG0_DRAM_TYPE_DDR2:
+		pr_info("Board has DDR2\n");
+		soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN;
+		soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX;
+		break;
+	default:
+		BUG();
+	}
+}
+
+static __init void
+mt7628_dram_init(struct ralink_soc_info *soc_info)
+{
+	switch (dram_type) {
+	case SYSCFG0_DRAM_TYPE_DDR1_MT7628:
+		pr_info("Board has DDR1\n");
+		soc_info->mem_size_min = MT7620_DDR1_SIZE_MIN;
+		soc_info->mem_size_max = MT7620_DDR1_SIZE_MAX;
+		break;
+
+	case SYSCFG0_DRAM_TYPE_DDR2_MT7628:
+		pr_info("Board has DDR2\n");
+		soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN;
+		soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX;
+		break;
+	default:
+		BUG();
+	}
+}
+
+void __init prom_soc_init(struct ralink_soc_info *soc_info)
+{
+	void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7620_SYSC_BASE);
+	unsigned char *name = NULL;
+	u32 n0;
+	u32 n1;
+	u32 rev;
+	u32 cfg0;
+	u32 pmu0;
+	u32 pmu1;
+	u32 bga;
+
+	n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
+	n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
+	rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
+	bga = (rev >> CHIP_REV_PKG_SHIFT) & CHIP_REV_PKG_MASK;
+
+	if (n0 == MT7620_CHIP_NAME0 && n1 == MT7620_CHIP_NAME1) {
+		if (bga) {
+			ralink_soc = MT762X_SOC_MT7620A;
+			name = "MT7620A";
+			soc_info->compatible = "ralink,mt7620a-soc";
+		} else {
+			ralink_soc = MT762X_SOC_MT7620N;
+			name = "MT7620N";
+			soc_info->compatible = "ralink,mt7620n-soc";
+		}
+	} else if (n0 == MT7620_CHIP_NAME0 && n1 == MT7628_CHIP_NAME1) {
+		u32 efuse = __raw_readl(sysc + SYSC_REG_EFUSE_CFG);
+
+		if (efuse & EFUSE_MT7688) {
+			ralink_soc = MT762X_SOC_MT7688;
+			name = "MT7688";
+		} else {
+			ralink_soc = MT762X_SOC_MT7628AN;
+			name = "MT7628AN";
+		}
+		soc_info->compatible = "ralink,mt7628an-soc";
+	} else {
+		panic("mt762x: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
+	}
+
+	snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
+		"MediaTek %s ver:%u eco:%u",
+		name,
+		(rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK,
+		(rev & CHIP_REV_ECO_MASK));
+
+	cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0);
+	if (is_mt76x8()) {
+		dram_type = cfg0 & DRAM_TYPE_MT7628_MASK;
+	} else {
+		dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) &
+			    SYSCFG0_DRAM_TYPE_MASK;
+		if (dram_type == SYSCFG0_DRAM_TYPE_UNKNOWN)
+			dram_type = SYSCFG0_DRAM_TYPE_SDRAM;
+	}
+
+	soc_info->mem_base = MT7620_DRAM_BASE;
+	if (is_mt76x8())
+		mt7628_dram_init(soc_info);
+	else
+		mt7620_dram_init(soc_info);
+
+	pmu0 = __raw_readl(sysc + PMU0_CFG);
+	pmu1 = __raw_readl(sysc + PMU1_CFG);
+
+	pr_info("Analog PMU set to %s control\n",
+		(pmu0 & PMU_SW_SET) ? ("sw") : ("hw"));
+	pr_info("Digital PMU set to %s control\n",
+		(pmu1 & DIG_SW_SEL) ? ("sw") : ("hw"));
+}
diff --git a/arch/mips/ralink/mt7621.c b/arch/mips/ralink/mt7621.c
new file mode 100644
index 000000000..bbf5811af
--- /dev/null
+++ b/arch/mips/ralink/mt7621.c
@@ -0,0 +1,224 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *
+ * Copyright (C) 2015 Nikolay Martynov <mar.kolya@gmail.com>
+ * Copyright (C) 2015 John Crispin <john@phrozen.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
+#include <linux/memblock.h>
+#include <linux/pci.h>
+#include <linux/bug.h>
+
+#include <asm/bootinfo.h>
+#include <asm/mipsregs.h>
+#include <asm/smp-ops.h>
+#include <asm/mips-cps.h>
+#include <asm/mach-ralink/ralink_regs.h>
+#include <asm/mach-ralink/mt7621.h>
+
+#include "common.h"
+
+#define MT7621_MEM_TEST_PATTERN         0xaa5555aa
+
+static u32 detect_magic __initdata;
+static struct ralink_soc_info *soc_info_ptr;
+
+int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
+{
+	struct resource_entry *entry;
+	resource_size_t mask;
+
+	entry = resource_list_first_type(&bridge->windows, IORESOURCE_MEM);
+	if (!entry) {
+		pr_err("Cannot get memory resource\n");
+		return -EINVAL;
+	}
+
+	if (mips_cps_numiocu(0)) {
+		/*
+		 * Hardware doesn't accept mask values with 1s after
+		 * 0s (e.g. 0xffef), so warn if that's happen
+		 */
+		mask = ~(entry->res->end - entry->res->start) & CM_GCR_REGn_MASK_ADDRMASK;
+		WARN_ON(mask && BIT(ffz(~mask)) - 1 != ~mask);
+
+		write_gcr_reg1_base(entry->res->start);
+		write_gcr_reg1_mask(mask | CM_GCR_REGn_MASK_CMTGT_IOCU0);
+		pr_info("PCI coherence region base: 0x%08llx, mask/settings: 0x%08llx\n",
+			(unsigned long long)read_gcr_reg1_base(),
+			(unsigned long long)read_gcr_reg1_mask());
+	}
+
+	return 0;
+}
+
+phys_addr_t mips_cpc_default_phys_base(void)
+{
+	panic("Cannot detect cpc address");
+}
+
+static bool __init mt7621_addr_wraparound_test(phys_addr_t size)
+{
+	void *dm = (void *)KSEG1ADDR(&detect_magic);
+
+	if (CPHYSADDR(dm + size) >= MT7621_LOWMEM_MAX_SIZE)
+		return true;
+	__raw_writel(MT7621_MEM_TEST_PATTERN, dm);
+	if (__raw_readl(dm) != __raw_readl(dm + size))
+		return false;
+	__raw_writel(~MT7621_MEM_TEST_PATTERN, dm);
+	return __raw_readl(dm) == __raw_readl(dm + size);
+}
+
+static void __init mt7621_memory_detect(void)
+{
+	phys_addr_t size;
+
+	for (size = 32 * SZ_1M; size <= 256 * SZ_1M; size <<= 1) {
+		if (mt7621_addr_wraparound_test(size)) {
+			memblock_add(MT7621_LOWMEM_BASE, size);
+			return;
+		}
+	}
+
+	memblock_add(MT7621_LOWMEM_BASE, MT7621_LOWMEM_MAX_SIZE);
+	memblock_add(MT7621_HIGHMEM_BASE, MT7621_HIGHMEM_SIZE);
+}
+
+void __init ralink_of_remap(void)
+{
+	rt_sysc_membase = plat_of_remap_node("mediatek,mt7621-sysc");
+	rt_memc_membase = plat_of_remap_node("mediatek,mt7621-memc");
+
+	if (!rt_sysc_membase || !rt_memc_membase)
+		panic("Failed to remap core resources");
+}
+
+static unsigned int __init mt7621_get_soc_name0(void)
+{
+	return __raw_readl(MT7621_SYSC_BASE + SYSC_REG_CHIP_NAME0);
+}
+
+static unsigned int __init mt7621_get_soc_name1(void)
+{
+	return __raw_readl(MT7621_SYSC_BASE + SYSC_REG_CHIP_NAME1);
+}
+
+static bool __init mt7621_soc_valid(void)
+{
+	if (mt7621_get_soc_name0() == MT7621_CHIP_NAME0 &&
+			mt7621_get_soc_name1() == MT7621_CHIP_NAME1)
+		return true;
+	else
+		return false;
+}
+
+static const char __init *mt7621_get_soc_id(void)
+{
+	if (mt7621_soc_valid())
+		return "MT7621";
+	else
+		return "invalid";
+}
+
+static unsigned int __init mt7621_get_soc_rev(void)
+{
+	return __raw_readl(MT7621_SYSC_BASE + SYSC_REG_CHIP_REV);
+}
+
+static unsigned int __init mt7621_get_soc_ver(void)
+{
+	return (mt7621_get_soc_rev() >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK;
+}
+
+static unsigned int __init mt7621_get_soc_eco(void)
+{
+	return (mt7621_get_soc_rev() & CHIP_REV_ECO_MASK);
+}
+
+static const char __init *mt7621_get_soc_revision(void)
+{
+	if (mt7621_get_soc_rev() == 1 && mt7621_get_soc_eco() == 1)
+		return "E2";
+	else
+		return "E1";
+}
+
+static int __init mt7621_soc_dev_init(void)
+{
+	struct soc_device *soc_dev;
+	struct soc_device_attribute *soc_dev_attr;
+
+	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+	if (!soc_dev_attr)
+		return -ENOMEM;
+
+	soc_dev_attr->soc_id = "mt7621";
+	soc_dev_attr->family = "Ralink";
+	soc_dev_attr->revision = mt7621_get_soc_revision();
+
+	soc_dev_attr->data = soc_info_ptr;
+
+	soc_dev = soc_device_register(soc_dev_attr);
+	if (IS_ERR(soc_dev)) {
+		kfree(soc_dev_attr);
+		return PTR_ERR(soc_dev);
+	}
+
+	return 0;
+}
+device_initcall(mt7621_soc_dev_init);
+
+void __init prom_soc_init(struct ralink_soc_info *soc_info)
+{
+	/* Early detection of CMP support */
+	mips_cm_probe();
+	mips_cpc_probe();
+
+	if (mips_cps_numiocu(0)) {
+		/*
+		 * mips_cm_probe() wipes out bootloader
+		 * config for CM regions and we have to configure them
+		 * again. This SoC cannot talk to pamlbus devices
+		 * witout proper iocu region set up.
+		 *
+		 * FIXME: it would be better to do this with values
+		 * from DT, but we need this very early because
+		 * without this we cannot talk to pretty much anything
+		 * including serial.
+		 */
+		write_gcr_reg0_base(MT7621_PALMBUS_BASE);
+		write_gcr_reg0_mask(~MT7621_PALMBUS_SIZE |
+				    CM_GCR_REGn_MASK_CMTGT_IOCU0);
+		__sync();
+	}
+
+	if (mt7621_soc_valid())
+		soc_info->compatible = "mediatek,mt7621-soc";
+	else
+		panic("mt7621: unknown SoC, n0:%08x n1:%08x\n",
+				mt7621_get_soc_name0(),
+				mt7621_get_soc_name1());
+	ralink_soc = MT762X_SOC_MT7621AT;
+
+	snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
+		"MediaTek %s ver:%u eco:%u",
+		mt7621_get_soc_id(),
+		mt7621_get_soc_ver(),
+		mt7621_get_soc_eco());
+
+	soc_info->mem_detect = mt7621_memory_detect;
+
+	soc_info_ptr = soc_info;
+
+	if (!register_cps_smp_ops())
+		return;
+	if (!register_cmp_smp_ops())
+		return;
+	if (!register_vsmp_smp_ops())
+		return;
+}
diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
new file mode 100644
index 000000000..4d06de77d
--- /dev/null
+++ b/arch/mips/ralink/of.c
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2013 John Crispin <john@phrozen.org>
+ */
+
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/sizes.h>
+#include <linux/of_fdt.h>
+#include <linux/kernel.h>
+#include <linux/memblock.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+
+#include <asm/reboot.h>
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+#include <asm/prom.h>
+#include <asm/mach-ralink/ralink_regs.h>
+
+#include "common.h"
+
+__iomem void *rt_sysc_membase;
+__iomem void *rt_memc_membase;
+EXPORT_SYMBOL_GPL(rt_sysc_membase);
+
+__iomem void *plat_of_remap_node(const char *node)
+{
+	struct resource res;
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, node);
+	if (!np)
+		panic("Failed to find %s node", node);
+
+	if (of_address_to_resource(np, 0, &res))
+		panic("Failed to get resource for %s", node);
+
+	of_node_put(np);
+
+	if (!request_mem_region(res.start,
+				resource_size(&res),
+				res.name))
+		panic("Failed to request resources for %s", node);
+
+	return ioremap(res.start, resource_size(&res));
+}
+
+void __init plat_mem_setup(void)
+{
+	void *dtb;
+
+	set_io_port_base(KSEG1);
+
+	/*
+	 * Load the builtin devicetree. This causes the chosen node to be
+	 * parsed resulting in our memory appearing.
+	 */
+	dtb = get_fdt();
+	__dt_setup_arch(dtb);
+
+	if (early_init_dt_scan_memory())
+		return;
+
+	if (soc_info.mem_detect)
+		soc_info.mem_detect();
+	else if (soc_info.mem_size)
+		memblock_add(soc_info.mem_base, soc_info.mem_size * SZ_1M);
+	else
+		detect_memory_region(soc_info.mem_base,
+				     soc_info.mem_size_min * SZ_1M,
+				     soc_info.mem_size_max * SZ_1M);
+}
+
+static int __init plat_of_setup(void)
+{
+	__dt_register_buses(soc_info.compatible, "palmbus");
+
+	/* make sure that the reset controller is setup early */
+	if (ralink_soc != MT762X_SOC_MT7621AT)
+		ralink_rst_init();
+
+	return 0;
+}
+
+arch_initcall(plat_of_setup);
diff --git a/arch/mips/ralink/prom.c b/arch/mips/ralink/prom.c
new file mode 100644
index 000000000..aaac1e6ec
--- /dev/null
+++ b/arch/mips/ralink/prom.c
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *
+ *  Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2010 Joonas Lahtinen <joonas.lahtinen@gmail.com>
+ *  Copyright (C) 2013 John Crispin <john@phrozen.org>
+ */
+
+#include <linux/string.h>
+#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
+
+#include <asm/bootinfo.h>
+#include <asm/addrspace.h>
+
+#include <asm/mach-ralink/ralink_regs.h>
+
+#include "common.h"
+
+struct ralink_soc_info soc_info;
+
+enum ralink_soc_type ralink_soc;
+EXPORT_SYMBOL_GPL(ralink_soc);
+
+const char *get_system_type(void)
+{
+	return soc_info.sys_type;
+}
+
+static __init void prom_init_cmdline(void)
+{
+	int argc;
+	char **argv;
+	int i;
+
+	pr_debug("prom: fw_arg0=%08x fw_arg1=%08x fw_arg2=%08x fw_arg3=%08x\n",
+	       (unsigned int)fw_arg0, (unsigned int)fw_arg1,
+	       (unsigned int)fw_arg2, (unsigned int)fw_arg3);
+
+	argc = fw_arg0;
+	argv = (char **) KSEG1ADDR(fw_arg1);
+
+	if (!argv) {
+		pr_debug("argv=%p is invalid, skipping\n",
+		       argv);
+		return;
+	}
+
+	for (i = 0; i < argc; i++) {
+		char *p = (char *) KSEG1ADDR(argv[i]);
+
+		if (CPHYSADDR(p) && *p) {
+			pr_debug("argv[%d]: %s\n", i, p);
+			strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline));
+			strlcat(arcs_cmdline, p, sizeof(arcs_cmdline));
+		}
+	}
+}
+
+void __init prom_init(void)
+{
+	prom_soc_init(&soc_info);
+
+	pr_info("SoC Type: %s\n", get_system_type());
+
+	prom_init_cmdline();
+}
diff --git a/arch/mips/ralink/reset.c b/arch/mips/ralink/reset.c
new file mode 100644
index 000000000..274d33078
--- /dev/null
+++ b/arch/mips/ralink/reset.c
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *
+ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2013 John Crispin <john@phrozen.org>
+ */
+
+#include <linux/pm.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/delay.h>
+#include <linux/reset-controller.h>
+
+#include <asm/reboot.h>
+
+#include <asm/mach-ralink/ralink_regs.h>
+
+/* Reset Control */
+#define SYSC_REG_RESET_CTRL	0x034
+
+#define RSTCTL_RESET_PCI	BIT(26)
+#define RSTCTL_RESET_SYSTEM	BIT(0)
+
+static int ralink_assert_device(struct reset_controller_dev *rcdev,
+				unsigned long id)
+{
+	u32 val;
+
+	if (id == 0)
+		return -1;
+
+	val = rt_sysc_r32(SYSC_REG_RESET_CTRL);
+	val |= BIT(id);
+	rt_sysc_w32(val, SYSC_REG_RESET_CTRL);
+
+	return 0;
+}
+
+static int ralink_deassert_device(struct reset_controller_dev *rcdev,
+				  unsigned long id)
+{
+	u32 val;
+
+	if (id == 0)
+		return -1;
+
+	val = rt_sysc_r32(SYSC_REG_RESET_CTRL);
+	val &= ~BIT(id);
+	rt_sysc_w32(val, SYSC_REG_RESET_CTRL);
+
+	return 0;
+}
+
+static int ralink_reset_device(struct reset_controller_dev *rcdev,
+			       unsigned long id)
+{
+	ralink_assert_device(rcdev, id);
+	return ralink_deassert_device(rcdev, id);
+}
+
+static const struct reset_control_ops reset_ops = {
+	.reset = ralink_reset_device,
+	.assert = ralink_assert_device,
+	.deassert = ralink_deassert_device,
+};
+
+static struct reset_controller_dev reset_dev = {
+	.ops			= &reset_ops,
+	.owner			= THIS_MODULE,
+	.nr_resets		= 32,
+	.of_reset_n_cells	= 1,
+};
+
+void ralink_rst_init(void)
+{
+	reset_dev.of_node = of_find_compatible_node(NULL, NULL,
+						"ralink,rt2880-reset");
+	if (!reset_dev.of_node)
+		pr_err("Failed to find reset controller node");
+	else
+		reset_controller_register(&reset_dev);
+}
+
+static void ralink_restart(char *command)
+{
+	if (IS_ENABLED(CONFIG_PCI)) {
+		rt_sysc_m32(0, RSTCTL_RESET_PCI, SYSC_REG_RESET_CTRL);
+		mdelay(50);
+	}
+
+	local_irq_disable();
+	rt_sysc_w32(RSTCTL_RESET_SYSTEM, SYSC_REG_RESET_CTRL);
+	unreachable();
+}
+
+static int __init mips_reboot_setup(void)
+{
+	_machine_restart = ralink_restart;
+
+	return 0;
+}
+
+arch_initcall(mips_reboot_setup);
diff --git a/arch/mips/ralink/rt288x.c b/arch/mips/ralink/rt288x.c
new file mode 100644
index 000000000..493335db2
--- /dev/null
+++ b/arch/mips/ralink/rt288x.c
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *
+ * Parts of this file are based on Ralink's 2.6.21 BSP
+ *
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2013 John Crispin <john@phrozen.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/mipsregs.h>
+#include <asm/mach-ralink/ralink_regs.h>
+#include <asm/mach-ralink/rt288x.h>
+
+#include "common.h"
+
+void __init ralink_clk_init(void)
+{
+	unsigned long cpu_rate, wmac_rate = 40000000;
+	u32 t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG);
+	t = ((t >> SYSTEM_CONFIG_CPUCLK_SHIFT) & SYSTEM_CONFIG_CPUCLK_MASK);
+
+	switch (t) {
+	case SYSTEM_CONFIG_CPUCLK_250:
+		cpu_rate = 250000000;
+		break;
+	case SYSTEM_CONFIG_CPUCLK_266:
+		cpu_rate = 266666667;
+		break;
+	case SYSTEM_CONFIG_CPUCLK_280:
+		cpu_rate = 280000000;
+		break;
+	case SYSTEM_CONFIG_CPUCLK_300:
+		cpu_rate = 300000000;
+		break;
+	}
+
+	ralink_clk_add("cpu", cpu_rate);
+	ralink_clk_add("300100.timer", cpu_rate / 2);
+	ralink_clk_add("300120.watchdog", cpu_rate / 2);
+	ralink_clk_add("300500.uart", cpu_rate / 2);
+	ralink_clk_add("300900.i2c", cpu_rate / 2);
+	ralink_clk_add("300c00.uartlite", cpu_rate / 2);
+	ralink_clk_add("400000.ethernet", cpu_rate / 2);
+	ralink_clk_add("480000.wmac", wmac_rate);
+}
+
+void __init ralink_of_remap(void)
+{
+	rt_sysc_membase = plat_of_remap_node("ralink,rt2880-sysc");
+	rt_memc_membase = plat_of_remap_node("ralink,rt2880-memc");
+
+	if (!rt_sysc_membase || !rt_memc_membase)
+		panic("Failed to remap core resources");
+}
+
+void __init prom_soc_init(struct ralink_soc_info *soc_info)
+{
+	void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT2880_SYSC_BASE);
+	const char *name;
+	u32 n0;
+	u32 n1;
+	u32 id;
+
+	n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
+	n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
+	id = __raw_readl(sysc + SYSC_REG_CHIP_ID);
+
+	if (n0 == RT2880_CHIP_NAME0 && n1 == RT2880_CHIP_NAME1) {
+		soc_info->compatible = "ralink,r2880-soc";
+		name = "RT2880";
+	} else {
+		panic("rt288x: unknown SoC, n0:%08x n1:%08x", n0, n1);
+	}
+
+	snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
+		"Ralink %s id:%u rev:%u",
+		name,
+		(id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK,
+		(id & CHIP_ID_REV_MASK));
+
+	soc_info->mem_base = RT2880_SDRAM_BASE;
+	soc_info->mem_size_min = RT2880_MEM_SIZE_MIN;
+	soc_info->mem_size_max = RT2880_MEM_SIZE_MAX;
+
+	ralink_soc = RT2880_SOC;
+}
diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
new file mode 100644
index 000000000..8b095a9dc
--- /dev/null
+++ b/arch/mips/ralink/rt305x.c
@@ -0,0 +1,201 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *
+ * Parts of this file are based on Ralink's 2.6.21 BSP
+ *
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2013 John Crispin <john@phrozen.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/bug.h>
+
+#include <asm/io.h>
+#include <asm/mipsregs.h>
+#include <asm/mach-ralink/ralink_regs.h>
+#include <asm/mach-ralink/rt305x.h>
+
+#include "common.h"
+
+static unsigned long rt5350_get_mem_size(void)
+{
+	void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE);
+	unsigned long ret;
+	u32 t;
+
+	t = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG);
+	t = (t >> RT5350_SYSCFG0_DRAM_SIZE_SHIFT) &
+		RT5350_SYSCFG0_DRAM_SIZE_MASK;
+
+	switch (t) {
+	case RT5350_SYSCFG0_DRAM_SIZE_2M:
+		ret = 2;
+		break;
+	case RT5350_SYSCFG0_DRAM_SIZE_8M:
+		ret = 8;
+		break;
+	case RT5350_SYSCFG0_DRAM_SIZE_16M:
+		ret = 16;
+		break;
+	case RT5350_SYSCFG0_DRAM_SIZE_32M:
+		ret = 32;
+		break;
+	case RT5350_SYSCFG0_DRAM_SIZE_64M:
+		ret = 64;
+		break;
+	default:
+		panic("rt5350: invalid DRAM size: %u", t);
+		break;
+	}
+
+	return ret;
+}
+
+void __init ralink_clk_init(void)
+{
+	unsigned long cpu_rate, sys_rate, wdt_rate, uart_rate;
+	unsigned long wmac_rate = 40000000;
+
+	u32 t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG);
+
+	if (soc_is_rt305x() || soc_is_rt3350()) {
+		t = (t >> RT305X_SYSCFG_CPUCLK_SHIFT) &
+		     RT305X_SYSCFG_CPUCLK_MASK;
+		switch (t) {
+		case RT305X_SYSCFG_CPUCLK_LOW:
+			cpu_rate = 320000000;
+			break;
+		case RT305X_SYSCFG_CPUCLK_HIGH:
+			cpu_rate = 384000000;
+			break;
+		}
+		sys_rate = uart_rate = wdt_rate = cpu_rate / 3;
+	} else if (soc_is_rt3352()) {
+		t = (t >> RT3352_SYSCFG0_CPUCLK_SHIFT) &
+		     RT3352_SYSCFG0_CPUCLK_MASK;
+		switch (t) {
+		case RT3352_SYSCFG0_CPUCLK_LOW:
+			cpu_rate = 384000000;
+			break;
+		case RT3352_SYSCFG0_CPUCLK_HIGH:
+			cpu_rate = 400000000;
+			break;
+		}
+		sys_rate = wdt_rate = cpu_rate / 3;
+		uart_rate = 40000000;
+	} else if (soc_is_rt5350()) {
+		t = (t >> RT5350_SYSCFG0_CPUCLK_SHIFT) &
+		     RT5350_SYSCFG0_CPUCLK_MASK;
+		switch (t) {
+		case RT5350_SYSCFG0_CPUCLK_360:
+			cpu_rate = 360000000;
+			sys_rate = cpu_rate / 3;
+			break;
+		case RT5350_SYSCFG0_CPUCLK_320:
+			cpu_rate = 320000000;
+			sys_rate = cpu_rate / 4;
+			break;
+		case RT5350_SYSCFG0_CPUCLK_300:
+			cpu_rate = 300000000;
+			sys_rate = cpu_rate / 3;
+			break;
+		default:
+			BUG();
+		}
+		uart_rate = 40000000;
+		wdt_rate = sys_rate;
+	} else {
+		BUG();
+	}
+
+	if (soc_is_rt3352() || soc_is_rt5350()) {
+		u32 val = rt_sysc_r32(RT3352_SYSC_REG_SYSCFG0);
+
+		if (!(val & RT3352_CLKCFG0_XTAL_SEL))
+			wmac_rate = 20000000;
+	}
+
+	ralink_clk_add("cpu", cpu_rate);
+	ralink_clk_add("sys", sys_rate);
+	ralink_clk_add("10000900.i2c", uart_rate);
+	ralink_clk_add("10000a00.i2s", uart_rate);
+	ralink_clk_add("10000b00.spi", sys_rate);
+	ralink_clk_add("10000b40.spi", sys_rate);
+	ralink_clk_add("10000100.timer", wdt_rate);
+	ralink_clk_add("10000120.watchdog", wdt_rate);
+	ralink_clk_add("10000500.uart", uart_rate);
+	ralink_clk_add("10000c00.uartlite", uart_rate);
+	ralink_clk_add("10100000.ethernet", sys_rate);
+	ralink_clk_add("10180000.wmac", wmac_rate);
+}
+
+void __init ralink_of_remap(void)
+{
+	rt_sysc_membase = plat_of_remap_node("ralink,rt3050-sysc");
+	rt_memc_membase = plat_of_remap_node("ralink,rt3050-memc");
+
+	if (!rt_sysc_membase || !rt_memc_membase)
+		panic("Failed to remap core resources");
+}
+
+void __init prom_soc_init(struct ralink_soc_info *soc_info)
+{
+	void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE);
+	unsigned char *name;
+	u32 n0;
+	u32 n1;
+	u32 id;
+
+	n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
+	n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
+
+	if (n0 == RT3052_CHIP_NAME0 && n1 == RT3052_CHIP_NAME1) {
+		unsigned long icache_sets;
+
+		icache_sets = (read_c0_config1() >> 22) & 7;
+		if (icache_sets == 1) {
+			ralink_soc = RT305X_SOC_RT3050;
+			name = "RT3050";
+			soc_info->compatible = "ralink,rt3050-soc";
+		} else {
+			ralink_soc = RT305X_SOC_RT3052;
+			name = "RT3052";
+			soc_info->compatible = "ralink,rt3052-soc";
+		}
+	} else if (n0 == RT3350_CHIP_NAME0 && n1 == RT3350_CHIP_NAME1) {
+		ralink_soc = RT305X_SOC_RT3350;
+		name = "RT3350";
+		soc_info->compatible = "ralink,rt3350-soc";
+	} else if (n0 == RT3352_CHIP_NAME0 && n1 == RT3352_CHIP_NAME1) {
+		ralink_soc = RT305X_SOC_RT3352;
+		name = "RT3352";
+		soc_info->compatible = "ralink,rt3352-soc";
+	} else if (n0 == RT5350_CHIP_NAME0 && n1 == RT5350_CHIP_NAME1) {
+		ralink_soc = RT305X_SOC_RT5350;
+		name = "RT5350";
+		soc_info->compatible = "ralink,rt5350-soc";
+	} else {
+		panic("rt305x: unknown SoC, n0:%08x n1:%08x", n0, n1);
+	}
+
+	id = __raw_readl(sysc + SYSC_REG_CHIP_ID);
+
+	snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
+		"Ralink %s id:%u rev:%u",
+		name,
+		(id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK,
+		(id & CHIP_ID_REV_MASK));
+
+	soc_info->mem_base = RT305X_SDRAM_BASE;
+	if (soc_is_rt5350()) {
+		soc_info->mem_size = rt5350_get_mem_size();
+	} else if (soc_is_rt305x() || soc_is_rt3350()) {
+		soc_info->mem_size_min = RT305X_MEM_SIZE_MIN;
+		soc_info->mem_size_max = RT305X_MEM_SIZE_MAX;
+	} else if (soc_is_rt3352()) {
+		soc_info->mem_size_min = RT3352_MEM_SIZE_MIN;
+		soc_info->mem_size_max = RT3352_MEM_SIZE_MAX;
+	}
+}
diff --git a/arch/mips/ralink/rt3883.c b/arch/mips/ralink/rt3883.c
new file mode 100644
index 000000000..d9875f146
--- /dev/null
+++ b/arch/mips/ralink/rt3883.c
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *
+ * Parts of this file are based on Ralink's 2.6.21 BSP
+ *
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2013 John Crispin <john@phrozen.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/mipsregs.h>
+#include <asm/mach-ralink/ralink_regs.h>
+#include <asm/mach-ralink/rt3883.h>
+
+#include "common.h"
+
+void __init ralink_clk_init(void)
+{
+	unsigned long cpu_rate, sys_rate;
+	u32 syscfg0;
+	u32 clksel;
+	u32 ddr2;
+
+	syscfg0 = rt_sysc_r32(RT3883_SYSC_REG_SYSCFG0);
+	clksel = ((syscfg0 >> RT3883_SYSCFG0_CPUCLK_SHIFT) &
+		RT3883_SYSCFG0_CPUCLK_MASK);
+	ddr2 = syscfg0 & RT3883_SYSCFG0_DRAM_TYPE_DDR2;
+
+	switch (clksel) {
+	case RT3883_SYSCFG0_CPUCLK_250:
+		cpu_rate = 250000000;
+		sys_rate = (ddr2) ? 125000000 : 83000000;
+		break;
+	case RT3883_SYSCFG0_CPUCLK_384:
+		cpu_rate = 384000000;
+		sys_rate = (ddr2) ? 128000000 : 96000000;
+		break;
+	case RT3883_SYSCFG0_CPUCLK_480:
+		cpu_rate = 480000000;
+		sys_rate = (ddr2) ? 160000000 : 120000000;
+		break;
+	case RT3883_SYSCFG0_CPUCLK_500:
+		cpu_rate = 500000000;
+		sys_rate = (ddr2) ? 166000000 : 125000000;
+		break;
+	}
+
+	ralink_clk_add("cpu", cpu_rate);
+	ralink_clk_add("10000100.timer", sys_rate);
+	ralink_clk_add("10000120.watchdog", sys_rate);
+	ralink_clk_add("10000500.uart", 40000000);
+	ralink_clk_add("10000900.i2c", 40000000);
+	ralink_clk_add("10000a00.i2s", 40000000);
+	ralink_clk_add("10000b00.spi", sys_rate);
+	ralink_clk_add("10000b40.spi", sys_rate);
+	ralink_clk_add("10000c00.uartlite", 40000000);
+	ralink_clk_add("10100000.ethernet", sys_rate);
+	ralink_clk_add("10180000.wmac", 40000000);
+}
+
+void __init ralink_of_remap(void)
+{
+	rt_sysc_membase = plat_of_remap_node("ralink,rt3883-sysc");
+	rt_memc_membase = plat_of_remap_node("ralink,rt3883-memc");
+
+	if (!rt_sysc_membase || !rt_memc_membase)
+		panic("Failed to remap core resources");
+}
+
+void __init prom_soc_init(struct ralink_soc_info *soc_info)
+{
+	void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT3883_SYSC_BASE);
+	const char *name;
+	u32 n0;
+	u32 n1;
+	u32 id;
+
+	n0 = __raw_readl(sysc + RT3883_SYSC_REG_CHIPID0_3);
+	n1 = __raw_readl(sysc + RT3883_SYSC_REG_CHIPID4_7);
+	id = __raw_readl(sysc + RT3883_SYSC_REG_REVID);
+
+	if (n0 == RT3883_CHIP_NAME0 && n1 == RT3883_CHIP_NAME1) {
+		soc_info->compatible = "ralink,rt3883-soc";
+		name = "RT3883";
+	} else {
+		panic("rt3883: unknown SoC, n0:%08x n1:%08x", n0, n1);
+	}
+
+	snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
+		"Ralink %s ver:%u eco:%u",
+		name,
+		(id >> RT3883_REVID_VER_ID_SHIFT) & RT3883_REVID_VER_ID_MASK,
+		(id & RT3883_REVID_ECO_ID_MASK));
+
+	soc_info->mem_base = RT3883_SDRAM_BASE;
+	soc_info->mem_size_min = RT3883_MEM_SIZE_MIN;
+	soc_info->mem_size_max = RT3883_MEM_SIZE_MAX;
+
+	ralink_soc = RT3883_SOC;
+}
diff --git a/arch/mips/ralink/timer-gic.c b/arch/mips/ralink/timer-gic.c
new file mode 100644
index 000000000..dcf2a44ac
--- /dev/null
+++ b/arch/mips/ralink/timer-gic.c
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *
+ * Copyright (C) 2015 Nikolay Martynov <mar.kolya@gmail.com>
+ * Copyright (C) 2015 John Crispin <john@phrozen.org>
+ */
+
+#include <linux/init.h>
+
+#include <linux/of.h>
+#include <linux/of_clk.h>
+#include <linux/clocksource.h>
+
+#include "common.h"
+
+void __init plat_time_init(void)
+{
+	ralink_of_remap();
+
+	of_clk_init(NULL);
+	timer_probe();
+}
diff --git a/arch/mips/ralink/timer.c b/arch/mips/ralink/timer.c
new file mode 100644
index 000000000..652424d8e
--- /dev/null
+++ b/arch/mips/ralink/timer.c
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Ralink RT2880 timer
+ * Author: John Crispin
+ *
+ * Copyright (C) 2013 John Crispin <john@phrozen.org>
+*/
+
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/timer.h>
+#include <linux/of_gpio.h>
+#include <linux/clk.h>
+
+#include <asm/mach-ralink/ralink_regs.h>
+
+#define TIMER_REG_TMRSTAT		0x00
+#define TIMER_REG_TMR0LOAD		0x10
+#define TIMER_REG_TMR0CTL		0x18
+
+#define TMRSTAT_TMR0INT			BIT(0)
+
+#define TMR0CTL_ENABLE			BIT(7)
+#define TMR0CTL_MODE_PERIODIC		BIT(4)
+#define TMR0CTL_PRESCALER		1
+#define TMR0CTL_PRESCALE_VAL		(0xf - TMR0CTL_PRESCALER)
+#define TMR0CTL_PRESCALE_DIV		(65536 / BIT(TMR0CTL_PRESCALER))
+
+struct rt_timer {
+	struct device	*dev;
+	void __iomem	*membase;
+	int		irq;
+	unsigned long	timer_freq;
+	unsigned long	timer_div;
+};
+
+static inline void rt_timer_w32(struct rt_timer *rt, u8 reg, u32 val)
+{
+	__raw_writel(val, rt->membase + reg);
+}
+
+static inline u32 rt_timer_r32(struct rt_timer *rt, u8 reg)
+{
+	return __raw_readl(rt->membase + reg);
+}
+
+static irqreturn_t rt_timer_irq(int irq, void *_rt)
+{
+	struct rt_timer *rt =  (struct rt_timer *) _rt;
+
+	rt_timer_w32(rt, TIMER_REG_TMR0LOAD, rt->timer_freq / rt->timer_div);
+	rt_timer_w32(rt, TIMER_REG_TMRSTAT, TMRSTAT_TMR0INT);
+
+	return IRQ_HANDLED;
+}
+
+
+static int rt_timer_request(struct rt_timer *rt)
+{
+	int err = request_irq(rt->irq, rt_timer_irq, 0,
+						dev_name(rt->dev), rt);
+	if (err) {
+		dev_err(rt->dev, "failed to request irq\n");
+	} else {
+		u32 t = TMR0CTL_MODE_PERIODIC | TMR0CTL_PRESCALE_VAL;
+		rt_timer_w32(rt, TIMER_REG_TMR0CTL, t);
+	}
+	return err;
+}
+
+static int rt_timer_config(struct rt_timer *rt, unsigned long divisor)
+{
+	if (rt->timer_freq < divisor)
+		rt->timer_div = rt->timer_freq;
+	else
+		rt->timer_div = divisor;
+
+	rt_timer_w32(rt, TIMER_REG_TMR0LOAD, rt->timer_freq / rt->timer_div);
+
+	return 0;
+}
+
+static int rt_timer_enable(struct rt_timer *rt)
+{
+	u32 t;
+
+	rt_timer_w32(rt, TIMER_REG_TMR0LOAD, rt->timer_freq / rt->timer_div);
+
+	t = rt_timer_r32(rt, TIMER_REG_TMR0CTL);
+	t |= TMR0CTL_ENABLE;
+	rt_timer_w32(rt, TIMER_REG_TMR0CTL, t);
+
+	return 0;
+}
+
+static int rt_timer_probe(struct platform_device *pdev)
+{
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	struct rt_timer *rt;
+	struct clk *clk;
+
+	rt = devm_kzalloc(&pdev->dev, sizeof(*rt), GFP_KERNEL);
+	if (!rt) {
+		dev_err(&pdev->dev, "failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	rt->irq = platform_get_irq(pdev, 0);
+	if (rt->irq < 0)
+		return rt->irq;
+
+	rt->membase = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(rt->membase))
+		return PTR_ERR(rt->membase);
+
+	clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "failed get clock rate\n");
+		return PTR_ERR(clk);
+	}
+
+	rt->timer_freq = clk_get_rate(clk) / TMR0CTL_PRESCALE_DIV;
+	if (!rt->timer_freq)
+		return -EINVAL;
+
+	rt->dev = &pdev->dev;
+	platform_set_drvdata(pdev, rt);
+
+	rt_timer_request(rt);
+	rt_timer_config(rt, 2);
+	rt_timer_enable(rt);
+
+	dev_info(&pdev->dev, "maximum frequency is %luHz\n", rt->timer_freq);
+
+	return 0;
+}
+
+static const struct of_device_id rt_timer_match[] = {
+	{ .compatible = "ralink,rt2880-timer" },
+	{},
+};
+
+static struct platform_driver rt_timer_driver = {
+	.probe = rt_timer_probe,
+	.driver = {
+		.name			= "rt-timer",
+		.of_match_table		= rt_timer_match,
+		.suppress_bind_attrs	= true,
+	},
+};
+builtin_platform_driver(rt_timer_driver);