Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 327 insertions, 0 deletions

diff --git a/arch/powerpc/boot/dts/fsl/p2020ds.dtsi b/arch/powerpc/boot/dts/fsl/p2020ds.dtsi
new file mode 100644
index 000000000..e699cf95b
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/p2020ds.dtsi
@@ -0,0 +1,327 @@
+/*
+ * P2020DS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x8000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		ramdisk@0 {
+			reg = <0x0 0x03000000>;
+			read-only;
+		};
+
+		diagnostic@3000000 {
+			reg = <0x03000000 0x00e00000>;
+			read-only;
+		};
+
+		dink@3e00000 {
+			reg = <0x03e00000 0x00200000>;
+			read-only;
+		};
+
+		kernel@4000000 {
+			reg = <0x04000000 0x00400000>;
+			read-only;
+		};
+
+		jffs2@4400000 {
+			reg = <0x04400000 0x03b00000>;
+		};
+
+		dtb@7f00000 {
+			reg = <0x07f00000 0x00080000>;
+			read-only;
+		};
+
+		u-boot@7f80000 {
+			reg = <0x07f80000 0x00080000>;
+			read-only;
+		};
+	};
+
+	nand@2,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,elbc-fcm-nand";
+		reg = <0x2 0x0 0x40000>;
+
+		u-boot@0 {
+			reg = <0x0 0x02000000>;
+			read-only;
+		};
+
+		jffs2@2000000 {
+			reg = <0x02000000 0x10000000>;
+		};
+
+		ramdisk@12000000 {
+			reg = <0x12000000 0x08000000>;
+			read-only;
+		};
+
+		kernel@1a000000 {
+			reg = <0x1a000000 0x04000000>;
+		};
+
+		dtb@1e000000 {
+			reg = <0x1e000000 0x01000000>;
+			read-only;
+		};
+
+		empty@1f000000 {
+			reg = <0x1f000000 0x21000000>;
+		};
+	};
+
+	board-control@3,0 {
+		compatible = "fsl,p2020ds-fpga", "fsl,fpga-ngpixis";
+		reg = <0x3 0x0 0x30>;
+	};
+
+	nand@4,0 {
+		compatible = "fsl,elbc-fcm-nand";
+		reg = <0x4 0x0 0x40000>;
+	};
+
+	nand@5,0 {
+		compatible = "fsl,elbc-fcm-nand";
+		reg = <0x5 0x0 0x40000>;
+	};
+
+	nand@6,0 {
+		compatible = "fsl,elbc-fcm-nand";
+		reg = <0x6 0x0 0x40000>;
+	};
+};
+
+&board_soc {
+	usb@22000 {
+		phy_type = "ulpi";
+		dr_mode = "host";
+	};
+
+	mdio@24520 {
+		phy0: ethernet-phy@0 {
+			interrupts = <3 1 0 0>;
+			reg = <0x0>;
+		};
+		phy1: ethernet-phy@1 {
+			interrupts = <3 1 0 0>;
+			reg = <0x1>;
+		};
+		phy2: ethernet-phy@2 {
+			interrupts = <3 1 0 0>;
+			reg = <0x2>;
+		};
+
+		sgmii_phy1: sgmii-phy@1 {
+			interrupts = <5 1 0 0>;
+			reg = <0x1c>;
+		};
+		sgmii_phy2: sgmii-phy@2 {
+			interrupts = <5 1 0 0>;
+			reg = <0x1d>;
+		};
+
+		tbi0: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+
+	};
+
+	mdio@25520 {
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	mdio@26520 {
+		tbi2: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+
+	};
+
+	ptp_clock@24e00 {
+		fsl,tclk-period = <5>;
+		fsl,tmr-prsc = <200>;
+		fsl,tmr-add = <0xCCCCCCCD>;
+		fsl,tmr-fiper1 = <0x3B9AC9FB>;
+		fsl,tmr-fiper2 = <0x0001869B>;
+		fsl,max-adj = <249999999>;
+	};
+
+	enet0: ethernet@24000 {
+		tbi-handle = <&tbi0>;
+		phy-handle = <&phy0>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	enet1: ethernet@25000 {
+		tbi-handle = <&tbi1>;
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+
+	};
+
+	enet2: ethernet@26000 {
+		tbi-handle = <&tbi2>;
+		phy-handle = <&phy2>;
+		phy-connection-type = "rgmii-id";
+	};
+};
+
+&board_pci1 {
+	pcie@0 {
+		interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			// IDSEL 0x11 func 0 - PCI slot 1
+			0x8800 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8800 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 1 - PCI slot 1
+			0x8900 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8900 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 2 - PCI slot 1
+			0x8a00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8a00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 3 - PCI slot 1
+			0x8b00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8b00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 4 - PCI slot 1
+			0x8c00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8c00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 5 - PCI slot 1
+			0x8d00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8d00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 6 - PCI slot 1
+			0x8e00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8e00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 7 - PCI slot 1
+			0x8f00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8f00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x1d  Audio
+			0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
+
+			// IDSEL 0x1e Legacy
+			0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
+			0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
+
+			// IDSEL 0x1f IDE/SATA
+			0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
+			0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
+			>;
+
+		uli1575@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+			isa@1e {
+				device_type = "isa";
+				#interrupt-cells = <2>;
+				#size-cells = <1>;
+				#address-cells = <2>;
+				reg = <0xf000 0x0 0x0 0x0 0x0>;
+				ranges = <0x1 0x0 0x1000000 0x0 0x0
+					  0x1000>;
+				interrupt-parent = <&i8259>;
+
+				i8259: interrupt-controller@20 {
+					reg = <0x1 0x20 0x2
+					       0x1 0xa0 0x2
+					       0x1 0x4d0 0x2>;
+					interrupt-controller;
+					device_type = "interrupt-controller";
+					#address-cells = <0>;
+					#interrupt-cells = <2>;
+					compatible = "chrp,iic";
+					interrupts = <4 1 0 0>;
+					interrupt-parent = <&mpic>;
+				};
+
+				i8042@60 {
+					#size-cells = <0>;
+					#address-cells = <1>;
+					reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
+					interrupts = <1 3 12 3>;
+					interrupt-parent =
+						<&i8259>;
+
+					keyboard@0 {
+						reg = <0x0>;
+						compatible = "pnpPNP,303";
+					};
+
+					mouse@1 {
+						reg = <0x1>;
+						compatible = "pnpPNP,f03";
+					};
+				};
+
+				rtc@70 {
+					compatible = "pnpPNP,b00";
+					reg = <0x1 0x70 0x2>;
+				};
+
+				gpio@400 {
+					reg = <0x1 0x400 0x80>;
+				};
+			};
+		};
+	};
+};