Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

17 files changed, 2555 insertions, 0 deletions

diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
new file mode 100644
index 000000000..c54786f84
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: GPL-2.0
+config EMBEDDED6xx
+	bool "Embedded 6xx/7xx/7xxx-based boards"
+	depends on PPC_BOOK3S_32 && BROKEN_ON_SMP
+
+config LINKSTATION
+	bool "Linkstation / Kurobox(HG) from Buffalo"
+	depends on EMBEDDED6xx
+	select MPIC
+	select FSL_SOC
+	select PPC_UDBG_16550 if SERIAL_8250
+	select DEFAULT_UIMAGE
+	select MPC10X_BRIDGE
+	help
+	  Select LINKSTATION if configuring for one of PPC- (MPC8241)
+	  based NAS systems from Buffalo Technology. So far only
+	  KuroboxHG has been tested. In the future classical Kurobox,
+	  Linkstation-I HD-HLAN and HD-HGLAN versions, and PPC-based
+	  Terastation systems should be supported too.
+
+config STORCENTER
+	bool "IOMEGA StorCenter"
+	depends on EMBEDDED6xx
+	select MPIC
+	select FSL_SOC
+	select PPC_UDBG_16550 if SERIAL_8250
+	select MPC10X_BRIDGE
+	help
+	  Select STORCENTER if configuring for the iomega StorCenter
+	  with an 8241 CPU in it.
+
+config MPC7448HPC2
+	bool "Freescale MPC7448HPC2(Taiga)"
+	depends on EMBEDDED6xx
+	select TSI108_BRIDGE
+	select DEFAULT_UIMAGE
+	select PPC_UDBG_16550
+	help
+	  Select MPC7448HPC2 if configuring for Freescale MPC7448HPC2 (Taiga)
+	  platform
+
+config PPC_HOLLY
+	bool "PPC750GX/CL with TSI10x bridge (Hickory/Holly)"
+	depends on EMBEDDED6xx
+	select TSI108_BRIDGE
+	select PPC_UDBG_16550
+	help
+	  Select PPC_HOLLY if configuring for an IBM 750GX/CL Eval
+	  Board with TSI108/9 bridge (Hickory/Holly)
+
+config MVME5100
+	bool "Motorola/Emerson MVME5100"
+	depends on EMBEDDED6xx
+	select MPIC
+	select FORCE_PCI
+	select PPC_INDIRECT_PCI
+	select PPC_I8259
+	select PPC_HASH_MMU_NATIVE
+	select PPC_UDBG_16550
+	help
+	  This option enables support for the Motorola (now Emerson) MVME5100
+	  board.
+
+config TSI108_BRIDGE
+	bool
+	select FORCE_PCI
+	select MPIC
+	select MPIC_WEIRD
+
+config MPC10X_BRIDGE
+	bool
+	select PPC_INDIRECT_PCI
+
+config GAMECUBE_COMMON
+	bool
+
+config USBGECKO_UDBG
+	bool "USB Gecko udbg console for the Nintendo GameCube/Wii"
+	depends on GAMECUBE_COMMON
+	help
+	  If you say yes to this option, support will be included for the
+	  USB Gecko adapter as an udbg console.
+	  The USB Gecko is a EXI to USB Serial converter that can be plugged
+	  into a memcard slot in the Nintendo GameCube/Wii.
+
+	  This driver bypasses the EXI layer completely.
+
+	  If in doubt, say N here.
+
+config GAMECUBE
+	bool "Nintendo-GameCube"
+	depends on EMBEDDED6xx
+	select GAMECUBE_COMMON
+	help
+	  Select GAMECUBE if configuring for the Nintendo GameCube.
+	  More information at: <http://gc-linux.sourceforge.net/>
+
+config WII
+	bool "Nintendo-Wii"
+	depends on EMBEDDED6xx
+	select GAMECUBE_COMMON
+	help
+	  Select WII if configuring for the Nintendo Wii.
+	  More information at: <http://gc-linux.sourceforge.net/>
diff --git a/arch/powerpc/platforms/embedded6xx/Makefile b/arch/powerpc/platforms/embedded6xx/Makefile
new file mode 100644
index 000000000..e656ae9f2
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/Makefile
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the 6xx/7xx/7xxxx linux kernel.
+#
+obj-$(CONFIG_MPC7448HPC2)	+= mpc7448_hpc2.o
+obj-$(CONFIG_LINKSTATION)	+= linkstation.o ls_uart.o
+obj-$(CONFIG_STORCENTER)	+= storcenter.o
+obj-$(CONFIG_PPC_HOLLY)		+= holly.o
+obj-$(CONFIG_USBGECKO_UDBG)	+= usbgecko_udbg.o
+obj-$(CONFIG_GAMECUBE_COMMON)	+= flipper-pic.o
+obj-$(CONFIG_GAMECUBE)		+= gamecube.o
+obj-$(CONFIG_WII)		+= wii.o hlwd-pic.o
+obj-$(CONFIG_MVME5100)		+= mvme5100.o
diff --git a/arch/powerpc/platforms/embedded6xx/flipper-pic.c b/arch/powerpc/platforms/embedded6xx/flipper-pic.c
new file mode 100644
index 000000000..4d9200bdb
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/flipper-pic.c
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * arch/powerpc/platforms/embedded6xx/flipper-pic.c
+ *
+ * Nintendo GameCube/Wii "Flipper" interrupt controller support.
+ * Copyright (C) 2004-2009 The GameCube Linux Team
+ * Copyright (C) 2007,2008,2009 Albert Herranz
+ */
+#define DRV_MODULE_NAME "flipper-pic"
+#define pr_fmt(fmt) DRV_MODULE_NAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <asm/io.h>
+
+#include "flipper-pic.h"
+
+#define FLIPPER_NR_IRQS		32
+
+/*
+ * Each interrupt has a corresponding bit in both
+ * the Interrupt Cause (ICR) and Interrupt Mask (IMR) registers.
+ *
+ * Enabling/disabling an interrupt line involves setting/clearing
+ * the corresponding bit in IMR.
+ * Except for the RSW interrupt, all interrupts get deasserted automatically
+ * when the source deasserts the interrupt.
+ */
+#define FLIPPER_ICR		0x00
+#define FLIPPER_ICR_RSS		(1<<16) /* reset switch state */
+
+#define FLIPPER_IMR		0x04
+
+#define FLIPPER_RESET		0x24
+
+
+/*
+ * IRQ chip hooks.
+ *
+ */
+
+static void flipper_pic_mask_and_ack(struct irq_data *d)
+{
+	int irq = irqd_to_hwirq(d);
+	void __iomem *io_base = irq_data_get_irq_chip_data(d);
+	u32 mask = 1 << irq;
+
+	clrbits32(io_base + FLIPPER_IMR, mask);
+	/* this is at least needed for RSW */
+	out_be32(io_base + FLIPPER_ICR, mask);
+}
+
+static void flipper_pic_ack(struct irq_data *d)
+{
+	int irq = irqd_to_hwirq(d);
+	void __iomem *io_base = irq_data_get_irq_chip_data(d);
+
+	/* this is at least needed for RSW */
+	out_be32(io_base + FLIPPER_ICR, 1 << irq);
+}
+
+static void flipper_pic_mask(struct irq_data *d)
+{
+	int irq = irqd_to_hwirq(d);
+	void __iomem *io_base = irq_data_get_irq_chip_data(d);
+
+	clrbits32(io_base + FLIPPER_IMR, 1 << irq);
+}
+
+static void flipper_pic_unmask(struct irq_data *d)
+{
+	int irq = irqd_to_hwirq(d);
+	void __iomem *io_base = irq_data_get_irq_chip_data(d);
+
+	setbits32(io_base + FLIPPER_IMR, 1 << irq);
+}
+
+
+static struct irq_chip flipper_pic = {
+	.name		= "flipper-pic",
+	.irq_ack	= flipper_pic_ack,
+	.irq_mask_ack	= flipper_pic_mask_and_ack,
+	.irq_mask	= flipper_pic_mask,
+	.irq_unmask	= flipper_pic_unmask,
+};
+
+/*
+ * IRQ host hooks.
+ *
+ */
+
+static struct irq_domain *flipper_irq_host;
+
+static int flipper_pic_map(struct irq_domain *h, unsigned int virq,
+			   irq_hw_number_t hwirq)
+{
+	irq_set_chip_data(virq, h->host_data);
+	irq_set_status_flags(virq, IRQ_LEVEL);
+	irq_set_chip_and_handler(virq, &flipper_pic, handle_level_irq);
+	return 0;
+}
+
+static const struct irq_domain_ops flipper_irq_domain_ops = {
+	.map = flipper_pic_map,
+};
+
+/*
+ * Platform hooks.
+ *
+ */
+
+static void __flipper_quiesce(void __iomem *io_base)
+{
+	/* mask and ack all IRQs */
+	out_be32(io_base + FLIPPER_IMR, 0x00000000);
+	out_be32(io_base + FLIPPER_ICR, 0xffffffff);
+}
+
+static struct irq_domain * __init flipper_pic_init(struct device_node *np)
+{
+	struct device_node *pi;
+	struct irq_domain *irq_domain = NULL;
+	struct resource res;
+	void __iomem *io_base;
+	int retval;
+
+	pi = of_get_parent(np);
+	if (!pi) {
+		pr_err("no parent found\n");
+		goto out;
+	}
+	if (!of_device_is_compatible(pi, "nintendo,flipper-pi")) {
+		pr_err("unexpected parent compatible\n");
+		goto out;
+	}
+
+	retval = of_address_to_resource(pi, 0, &res);
+	if (retval) {
+		pr_err("no io memory range found\n");
+		goto out;
+	}
+	io_base = ioremap(res.start, resource_size(&res));
+
+	pr_info("controller at 0x%pa mapped to 0x%p\n", &res.start, io_base);
+
+	__flipper_quiesce(io_base);
+
+	irq_domain = irq_domain_add_linear(np, FLIPPER_NR_IRQS,
+				  &flipper_irq_domain_ops, io_base);
+	if (!irq_domain) {
+		pr_err("failed to allocate irq_domain\n");
+		return NULL;
+	}
+
+out:
+	return irq_domain;
+}
+
+unsigned int flipper_pic_get_irq(void)
+{
+	void __iomem *io_base = flipper_irq_host->host_data;
+	int irq;
+	u32 irq_status;
+
+	irq_status = in_be32(io_base + FLIPPER_ICR) &
+		     in_be32(io_base + FLIPPER_IMR);
+	if (irq_status == 0)
+		return 0;	/* no more IRQs pending */
+
+	irq = __ffs(irq_status);
+	return irq_linear_revmap(flipper_irq_host, irq);
+}
+
+/*
+ * Probe function.
+ *
+ */
+
+void __init flipper_pic_probe(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "nintendo,flipper-pic");
+	BUG_ON(!np);
+
+	flipper_irq_host = flipper_pic_init(np);
+	BUG_ON(!flipper_irq_host);
+
+	irq_set_default_host(flipper_irq_host);
+
+	of_node_put(np);
+}
+
+/*
+ * Misc functions related to the flipper chipset.
+ *
+ */
+
+/**
+ * flipper_quiesce() - quiesce flipper irq controller
+ *
+ * Mask and ack all interrupt sources.
+ *
+ */
+void flipper_quiesce(void)
+{
+	void __iomem *io_base = flipper_irq_host->host_data;
+
+	__flipper_quiesce(io_base);
+}
+
+/*
+ * Resets the platform.
+ */
+void flipper_platform_reset(void)
+{
+	void __iomem *io_base;
+
+	if (flipper_irq_host && flipper_irq_host->host_data) {
+		io_base = flipper_irq_host->host_data;
+		out_8(io_base + FLIPPER_RESET, 0x00);
+	}
+}
+
+/*
+ * Returns non-zero if the reset button is pressed.
+ */
+int flipper_is_reset_button_pressed(void)
+{
+	void __iomem *io_base;
+	u32 icr;
+
+	if (flipper_irq_host && flipper_irq_host->host_data) {
+		io_base = flipper_irq_host->host_data;
+		icr = in_be32(io_base + FLIPPER_ICR);
+		return !(icr & FLIPPER_ICR_RSS);
+	}
+	return 0;
+}
+
diff --git a/arch/powerpc/platforms/embedded6xx/flipper-pic.h b/arch/powerpc/platforms/embedded6xx/flipper-pic.h
new file mode 100644
index 000000000..024ae70ba
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/flipper-pic.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * arch/powerpc/platforms/embedded6xx/flipper-pic.h
+ *
+ * Nintendo GameCube/Wii "Flipper" interrupt controller support.
+ * Copyright (C) 2004-2009 The GameCube Linux Team
+ * Copyright (C) 2007,2008,2009 Albert Herranz
+ */
+
+#ifndef __FLIPPER_PIC_H
+#define __FLIPPER_PIC_H
+
+unsigned int flipper_pic_get_irq(void);
+void __init flipper_pic_probe(void);
+
+void flipper_quiesce(void);
+void flipper_platform_reset(void);
+int flipper_is_reset_button_pressed(void);
+
+#endif
diff --git a/arch/powerpc/platforms/embedded6xx/gamecube.c b/arch/powerpc/platforms/embedded6xx/gamecube.c
new file mode 100644
index 000000000..5c2575adc
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/gamecube.c
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * arch/powerpc/platforms/embedded6xx/gamecube.c
+ *
+ * Nintendo GameCube board-specific support
+ * Copyright (C) 2004-2009 The GameCube Linux Team
+ * Copyright (C) 2007,2008,2009 Albert Herranz
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/kexec.h>
+#include <linux/seq_file.h>
+#include <linux/of_platform.h>
+
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/time.h>
+#include <asm/udbg.h>
+
+#include "flipper-pic.h"
+#include "usbgecko_udbg.h"
+
+
+static void __noreturn gamecube_spin(void)
+{
+	/* spin until power button pressed */
+	for (;;)
+		cpu_relax();
+}
+
+static void __noreturn gamecube_restart(char *cmd)
+{
+	local_irq_disable();
+	flipper_platform_reset();
+	gamecube_spin();
+}
+
+static void gamecube_power_off(void)
+{
+	local_irq_disable();
+	gamecube_spin();
+}
+
+static void __noreturn gamecube_halt(void)
+{
+	gamecube_restart(NULL);
+}
+
+static int __init gamecube_probe(void)
+{
+	if (!of_machine_is_compatible("nintendo,gamecube"))
+		return 0;
+
+	pm_power_off = gamecube_power_off;
+
+	ug_udbg_init();
+
+	return 1;
+}
+
+static void gamecube_shutdown(void)
+{
+	flipper_quiesce();
+}
+
+define_machine(gamecube) {
+	.name			= "gamecube",
+	.probe			= gamecube_probe,
+	.restart		= gamecube_restart,
+	.halt			= gamecube_halt,
+	.init_IRQ		= flipper_pic_probe,
+	.get_irq		= flipper_pic_get_irq,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+	.machine_shutdown	= gamecube_shutdown,
+};
+
+
+static const struct of_device_id gamecube_of_bus[] = {
+	{ .compatible = "nintendo,flipper", },
+	{ },
+};
+
+static int __init gamecube_device_probe(void)
+{
+	if (!machine_is(gamecube))
+		return 0;
+
+	of_platform_bus_probe(NULL, gamecube_of_bus, NULL);
+	return 0;
+}
+device_initcall(gamecube_device_probe);
+
diff --git a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c
new file mode 100644
index 000000000..4d2d92de3
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c
@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * arch/powerpc/platforms/embedded6xx/hlwd-pic.c
+ *
+ * Nintendo Wii "Hollywood" interrupt controller support.
+ * Copyright (C) 2009 The GameCube Linux Team
+ * Copyright (C) 2009 Albert Herranz
+ */
+#define DRV_MODULE_NAME "hlwd-pic"
+#define pr_fmt(fmt) DRV_MODULE_NAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <asm/io.h>
+
+#include "hlwd-pic.h"
+
+#define HLWD_NR_IRQS	32
+
+/*
+ * Each interrupt has a corresponding bit in both
+ * the Interrupt Cause (ICR) and Interrupt Mask (IMR) registers.
+ *
+ * Enabling/disabling an interrupt line involves asserting/clearing
+ * the corresponding bit in IMR. ACK'ing a request simply involves
+ * asserting the corresponding bit in ICR.
+ */
+#define HW_BROADWAY_ICR		0x00
+#define HW_BROADWAY_IMR		0x04
+#define HW_STARLET_ICR		0x08
+#define HW_STARLET_IMR		0x0c
+
+
+/*
+ * IRQ chip hooks.
+ *
+ */
+
+static void hlwd_pic_mask_and_ack(struct irq_data *d)
+{
+	int irq = irqd_to_hwirq(d);
+	void __iomem *io_base = irq_data_get_irq_chip_data(d);
+	u32 mask = 1 << irq;
+
+	clrbits32(io_base + HW_BROADWAY_IMR, mask);
+	out_be32(io_base + HW_BROADWAY_ICR, mask);
+}
+
+static void hlwd_pic_ack(struct irq_data *d)
+{
+	int irq = irqd_to_hwirq(d);
+	void __iomem *io_base = irq_data_get_irq_chip_data(d);
+
+	out_be32(io_base + HW_BROADWAY_ICR, 1 << irq);
+}
+
+static void hlwd_pic_mask(struct irq_data *d)
+{
+	int irq = irqd_to_hwirq(d);
+	void __iomem *io_base = irq_data_get_irq_chip_data(d);
+
+	clrbits32(io_base + HW_BROADWAY_IMR, 1 << irq);
+}
+
+static void hlwd_pic_unmask(struct irq_data *d)
+{
+	int irq = irqd_to_hwirq(d);
+	void __iomem *io_base = irq_data_get_irq_chip_data(d);
+
+	setbits32(io_base + HW_BROADWAY_IMR, 1 << irq);
+
+	/* Make sure the ARM (aka. Starlet) doesn't handle this interrupt. */
+	clrbits32(io_base + HW_STARLET_IMR, 1 << irq);
+}
+
+
+static struct irq_chip hlwd_pic = {
+	.name		= "hlwd-pic",
+	.irq_ack	= hlwd_pic_ack,
+	.irq_mask_ack	= hlwd_pic_mask_and_ack,
+	.irq_mask	= hlwd_pic_mask,
+	.irq_unmask	= hlwd_pic_unmask,
+};
+
+/*
+ * IRQ host hooks.
+ *
+ */
+
+static struct irq_domain *hlwd_irq_host;
+
+static int hlwd_pic_map(struct irq_domain *h, unsigned int virq,
+			   irq_hw_number_t hwirq)
+{
+	irq_set_chip_data(virq, h->host_data);
+	irq_set_status_flags(virq, IRQ_LEVEL);
+	irq_set_chip_and_handler(virq, &hlwd_pic, handle_level_irq);
+	return 0;
+}
+
+static const struct irq_domain_ops hlwd_irq_domain_ops = {
+	.map = hlwd_pic_map,
+};
+
+static unsigned int __hlwd_pic_get_irq(struct irq_domain *h)
+{
+	void __iomem *io_base = h->host_data;
+	u32 irq_status;
+
+	irq_status = in_be32(io_base + HW_BROADWAY_ICR) &
+		     in_be32(io_base + HW_BROADWAY_IMR);
+	if (irq_status == 0)
+		return 0;	/* no more IRQs pending */
+
+	return __ffs(irq_status);
+}
+
+static void hlwd_pic_irq_cascade(struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	struct irq_domain *irq_domain = irq_desc_get_handler_data(desc);
+	unsigned int hwirq;
+
+	raw_spin_lock(&desc->lock);
+	chip->irq_mask(&desc->irq_data); /* IRQ_LEVEL */
+	raw_spin_unlock(&desc->lock);
+
+	hwirq = __hlwd_pic_get_irq(irq_domain);
+	if (hwirq)
+		generic_handle_domain_irq(irq_domain, hwirq);
+	else
+		pr_err("spurious interrupt!\n");
+
+	raw_spin_lock(&desc->lock);
+	chip->irq_ack(&desc->irq_data); /* IRQ_LEVEL */
+	if (!irqd_irq_disabled(&desc->irq_data) && chip->irq_unmask)
+		chip->irq_unmask(&desc->irq_data);
+	raw_spin_unlock(&desc->lock);
+}
+
+/*
+ * Platform hooks.
+ *
+ */
+
+static void __hlwd_quiesce(void __iomem *io_base)
+{
+	/* mask and ack all IRQs */
+	out_be32(io_base + HW_BROADWAY_IMR, 0);
+	out_be32(io_base + HW_BROADWAY_ICR, 0xffffffff);
+}
+
+static struct irq_domain *__init hlwd_pic_init(struct device_node *np)
+{
+	struct irq_domain *irq_domain;
+	struct resource res;
+	void __iomem *io_base;
+	int retval;
+
+	retval = of_address_to_resource(np, 0, &res);
+	if (retval) {
+		pr_err("no io memory range found\n");
+		return NULL;
+	}
+	io_base = ioremap(res.start, resource_size(&res));
+	if (!io_base) {
+		pr_err("ioremap failed\n");
+		return NULL;
+	}
+
+	pr_info("controller at 0x%pa mapped to 0x%p\n", &res.start, io_base);
+
+	__hlwd_quiesce(io_base);
+
+	irq_domain = irq_domain_add_linear(np, HLWD_NR_IRQS,
+					   &hlwd_irq_domain_ops, io_base);
+	if (!irq_domain) {
+		pr_err("failed to allocate irq_domain\n");
+		iounmap(io_base);
+		return NULL;
+	}
+
+	return irq_domain;
+}
+
+unsigned int hlwd_pic_get_irq(void)
+{
+	unsigned int hwirq = __hlwd_pic_get_irq(hlwd_irq_host);
+	return hwirq ? irq_linear_revmap(hlwd_irq_host, hwirq) : 0;
+}
+
+/*
+ * Probe function.
+ *
+ */
+
+void __init hlwd_pic_probe(void)
+{
+	struct irq_domain *host;
+	struct device_node *np;
+	const u32 *interrupts;
+	int cascade_virq;
+
+	for_each_compatible_node(np, NULL, "nintendo,hollywood-pic") {
+		interrupts = of_get_property(np, "interrupts", NULL);
+		if (interrupts) {
+			host = hlwd_pic_init(np);
+			BUG_ON(!host);
+			cascade_virq = irq_of_parse_and_map(np, 0);
+			irq_set_handler_data(cascade_virq, host);
+			irq_set_chained_handler(cascade_virq,
+						hlwd_pic_irq_cascade);
+			hlwd_irq_host = host;
+			of_node_put(np);
+			break;
+		}
+	}
+}
+
+/**
+ * hlwd_quiesce() - quiesce hollywood irq controller
+ *
+ * Mask and ack all interrupt sources.
+ *
+ */
+void hlwd_quiesce(void)
+{
+	void __iomem *io_base = hlwd_irq_host->host_data;
+
+	__hlwd_quiesce(io_base);
+}
+
diff --git a/arch/powerpc/platforms/embedded6xx/hlwd-pic.h b/arch/powerpc/platforms/embedded6xx/hlwd-pic.h
new file mode 100644
index 000000000..c2fa42e19
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/hlwd-pic.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * arch/powerpc/platforms/embedded6xx/hlwd-pic.h
+ *
+ * Nintendo Wii "Hollywood" interrupt controller support.
+ * Copyright (C) 2009 The GameCube Linux Team
+ * Copyright (C) 2009 Albert Herranz
+ */
+
+#ifndef __HLWD_PIC_H
+#define __HLWD_PIC_H
+
+extern unsigned int hlwd_pic_get_irq(void);
+void __init hlwd_pic_probe(void);
+extern void hlwd_quiesce(void);
+
+#endif
diff --git a/arch/powerpc/platforms/embedded6xx/holly.c b/arch/powerpc/platforms/embedded6xx/holly.c
new file mode 100644
index 000000000..bebc5a972
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/holly.c
@@ -0,0 +1,280 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Board setup routines for the IBM 750GX/CL platform w/ TSI10x bridge
+ *
+ * Copyright 2007 IBM Corporation
+ *
+ * Stephen Winiecki <stevewin@us.ibm.com>
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * Based on code from mpc7448_hpc2.c
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_core.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/extable.h>
+
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/udbg.h>
+#include <asm/tsi108.h>
+#include <asm/pci-bridge.h>
+#include <asm/reg.h>
+#include <mm/mmu_decl.h>
+#include <asm/tsi108_irq.h>
+#include <asm/tsi108_pci.h>
+#include <asm/mpic.h>
+
+#undef DEBUG
+
+#define HOLLY_PCI_CFG_PHYS 0x7c000000
+
+static int holly_exclude_device(struct pci_controller *hose, u_char bus,
+				u_char devfn)
+{
+	if (bus == 0 && PCI_SLOT(devfn) == 0)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	else
+		return PCIBIOS_SUCCESSFUL;
+}
+
+static void __init holly_remap_bridge(void)
+{
+	u32 lut_val, lut_addr;
+	int i;
+
+	printk(KERN_INFO "Remapping PCI bridge\n");
+
+	/* Re-init the PCI bridge and LUT registers to have mappings that don't
+	 * rely on PIBS
+	 */
+	lut_addr = 0x900;
+	for (i = 0; i < 31; i++) {
+		tsi108_write_reg(TSI108_PB_OFFSET + lut_addr, 0x00000201);
+		lut_addr += 4;
+		tsi108_write_reg(TSI108_PB_OFFSET + lut_addr, 0x0);
+		lut_addr += 4;
+	}
+
+	/* Reserve the last LUT entry for PCI I/O space */
+	tsi108_write_reg(TSI108_PB_OFFSET + lut_addr, 0x00000241);
+	lut_addr += 4;
+	tsi108_write_reg(TSI108_PB_OFFSET + lut_addr, 0x0);
+
+	/* Map PCI I/O space */
+	tsi108_write_reg(TSI108_PCI_PFAB_IO_UPPER, 0x0);
+	tsi108_write_reg(TSI108_PCI_PFAB_IO, 0x1);
+
+	/* Map PCI CFG space */
+	tsi108_write_reg(TSI108_PCI_PFAB_BAR0_UPPER, 0x0);
+	tsi108_write_reg(TSI108_PCI_PFAB_BAR0, 0x7c000000 | 0x01);
+
+	/* We don't need MEM32 and PRM remapping so disable them */
+	tsi108_write_reg(TSI108_PCI_PFAB_MEM32, 0x0);
+	tsi108_write_reg(TSI108_PCI_PFAB_PFM3, 0x0);
+	tsi108_write_reg(TSI108_PCI_PFAB_PFM4, 0x0);
+
+	/* Set P2O_BAR0 */
+	tsi108_write_reg(TSI108_PCI_P2O_BAR0_UPPER, 0x0);
+	tsi108_write_reg(TSI108_PCI_P2O_BAR0, 0xc0000000);
+
+	/* Init the PCI LUTs to do no remapping */
+	lut_addr = 0x500;
+	lut_val = 0x00000002;
+
+	for (i = 0; i < 32; i++) {
+		tsi108_write_reg(TSI108_PCI_OFFSET + lut_addr, lut_val);
+		lut_addr += 4;
+		tsi108_write_reg(TSI108_PCI_OFFSET + lut_addr, 0x40000000);
+		lut_addr += 4;
+		lut_val += 0x02000000;
+	}
+	tsi108_write_reg(TSI108_PCI_P2O_PAGE_SIZES, 0x00007900);
+
+	/* Set 64-bit PCI bus address for system memory */
+	tsi108_write_reg(TSI108_PCI_P2O_BAR2_UPPER, 0x0);
+	tsi108_write_reg(TSI108_PCI_P2O_BAR2, 0x0);
+}
+
+static void __init holly_init_pci(void)
+{
+	struct device_node *np;
+
+	if (ppc_md.progress)
+		ppc_md.progress("holly_setup_arch():set_bridge", 0);
+
+	/* setup PCI host bridge */
+	holly_remap_bridge();
+
+	np = of_find_node_by_type(NULL, "pci");
+	if (np)
+		tsi108_setup_pci(np, HOLLY_PCI_CFG_PHYS, 1);
+
+	of_node_put(np);
+
+	ppc_md.pci_exclude_device = holly_exclude_device;
+	if (ppc_md.progress)
+		ppc_md.progress("tsi108: resources set", 0x100);
+}
+
+static void __init holly_setup_arch(void)
+{
+	tsi108_csr_vir_base = get_vir_csrbase();
+
+	printk(KERN_INFO "PPC750GX/CL Platform\n");
+}
+
+/*
+ * Interrupt setup and service.  Interrupts on the holly come
+ * from the four external INT pins, PCI interrupts are routed via
+ * PCI interrupt control registers, it generates internal IRQ23
+ *
+ * Interrupt routing on the Holly Board:
+ * TSI108:PB_INT[0] -> CPU0:INT#
+ * TSI108:PB_INT[1] -> CPU0:MCP#
+ * TSI108:PB_INT[2] -> N/C
+ * TSI108:PB_INT[3] -> N/C
+ */
+static void __init holly_init_IRQ(void)
+{
+	struct mpic *mpic;
+#ifdef CONFIG_PCI
+	unsigned int cascade_pci_irq;
+	struct device_node *tsi_pci;
+	struct device_node *cascade_node = NULL;
+#endif
+
+	mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
+			MPIC_SPV_EOI | MPIC_NO_PTHROU_DIS | MPIC_REGSET_TSI108,
+			24, 0,
+			"Tsi108_PIC");
+
+	BUG_ON(mpic == NULL);
+
+	mpic_assign_isu(mpic, 0, mpic->paddr + 0x100);
+
+	mpic_init(mpic);
+
+#ifdef CONFIG_PCI
+	tsi_pci = of_find_node_by_type(NULL, "pci");
+	if (tsi_pci == NULL) {
+		printk(KERN_ERR "%s: No tsi108 pci node found !\n", __func__);
+		return;
+	}
+
+	cascade_node = of_find_node_by_type(NULL, "pic-router");
+	if (cascade_node == NULL) {
+		printk(KERN_ERR "%s: No tsi108 pci cascade node found !\n", __func__);
+		return;
+	}
+
+	cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0);
+	pr_debug("%s: tsi108 cascade_pci_irq = 0x%x\n", __func__, (u32) cascade_pci_irq);
+	tsi108_pci_int_init(cascade_node);
+	irq_set_handler_data(cascade_pci_irq, mpic);
+	irq_set_chained_handler(cascade_pci_irq, tsi108_irq_cascade);
+
+	of_node_put(tsi_pci);
+	of_node_put(cascade_node);
+#endif
+	/* Configure MPIC outputs to CPU0 */
+	tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0);
+}
+
+static void holly_show_cpuinfo(struct seq_file *m)
+{
+	seq_printf(m, "vendor\t\t: IBM\n");
+	seq_printf(m, "machine\t\t: PPC750 GX/CL\n");
+}
+
+static void __noreturn holly_restart(char *cmd)
+{
+	__be32 __iomem *ocn_bar1 = NULL;
+	unsigned long bar;
+	struct device_node *bridge = NULL;
+	const void *prop;
+	int size;
+	phys_addr_t addr = 0xc0000000;
+
+	local_irq_disable();
+
+	bridge = of_find_node_by_type(NULL, "tsi-bridge");
+	if (bridge) {
+		prop = of_get_property(bridge, "reg", &size);
+		addr = of_translate_address(bridge, prop);
+		of_node_put(bridge);
+	}
+	addr += (TSI108_PB_OFFSET + 0x414);
+
+	ocn_bar1 = ioremap(addr, 0x4);
+
+	/* Turn on the BOOT bit so the addresses are correctly
+	 * routed to the HLP interface */
+	bar = ioread32be(ocn_bar1);
+	bar |= 2;
+	iowrite32be(bar, ocn_bar1);
+	iosync();
+
+	/* Set SRR0 to the reset vector and turn on MSR_IP */
+	mtspr(SPRN_SRR0, 0xfff00100);
+	mtspr(SPRN_SRR1, MSR_IP);
+
+	/* Do an rfi to jump back to firmware.  Somewhat evil,
+	 * but it works
+	 */
+	__asm__ __volatile__("rfi" : : : "memory");
+
+	/* Spin until reset happens.  Shouldn't really get here */
+	for (;;) ;
+}
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init holly_probe(void)
+{
+	if (!of_machine_is_compatible("ibm,holly"))
+		return 0;
+	return 1;
+}
+
+static int ppc750_machine_check_exception(struct pt_regs *regs)
+{
+	const struct exception_table_entry *entry;
+
+	/* Are we prepared to handle this fault */
+	if ((entry = search_exception_tables(regs->nip)) != NULL) {
+		tsi108_clear_pci_cfg_error();
+		regs_set_recoverable(regs);
+		regs_set_return_ip(regs, extable_fixup(entry));
+		return 1;
+	}
+	return 0;
+}
+
+define_machine(holly){
+	.name                   	= "PPC750 GX/CL TSI",
+	.probe                  	= holly_probe,
+	.setup_arch             	= holly_setup_arch,
+	.discover_phbs			= holly_init_pci,
+	.init_IRQ               	= holly_init_IRQ,
+	.show_cpuinfo           	= holly_show_cpuinfo,
+	.get_irq                	= mpic_get_irq,
+	.restart                	= holly_restart,
+	.calibrate_decr         	= generic_calibrate_decr,
+	.machine_check_exception	= ppc750_machine_check_exception,
+	.progress               	= udbg_progress,
+};
diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c
new file mode 100644
index 000000000..1830e1ac1
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/linkstation.c
@@ -0,0 +1,165 @@
+/*
+ * Board setup routines for the Buffalo Linkstation / Kurobox Platform.
+ *
+ * Copyright (C) 2006 G. Liakhovetski (g.liakhovetski@gmx.de)
+ *
+ * Based on sandpoint.c by Mark A. Greer
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of
+ * any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/initrd.h>
+#include <linux/of_platform.h>
+
+#include <asm/time.h>
+#include <asm/mpic.h>
+#include <asm/pci-bridge.h>
+
+#include "mpc10x.h"
+
+static const struct of_device_id of_bus_ids[] __initconst = {
+	{ .type = "soc", },
+	{ .compatible = "simple-bus", },
+	{},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+	of_platform_bus_probe(NULL, of_bus_ids, NULL);
+	return 0;
+}
+machine_device_initcall(linkstation, declare_of_platform_devices);
+
+static int __init linkstation_add_bridge(struct device_node *dev)
+{
+#ifdef CONFIG_PCI
+	int len;
+	struct pci_controller *hose;
+	const int *bus_range;
+
+	printk("Adding PCI host bridge %pOF\n", dev);
+
+	bus_range = of_get_property(dev, "bus-range", &len);
+	if (bus_range == NULL || len < 2 * sizeof(int))
+		printk(KERN_WARNING "Can't get bus-range for %pOF, assume"
+				" bus 0\n", dev);
+
+	hose = pcibios_alloc_controller(dev);
+	if (hose == NULL)
+		return -ENOMEM;
+	hose->first_busno = bus_range ? bus_range[0] : 0;
+	hose->last_busno = bus_range ? bus_range[1] : 0xff;
+	setup_indirect_pci(hose, 0xfec00000, 0xfee00000, 0);
+
+	/* Interpret the "ranges" property */
+	/* This also maps the I/O region and sets isa_io/mem_base */
+	pci_process_bridge_OF_ranges(hose, dev, 1);
+#endif
+	return 0;
+}
+
+static void __init linkstation_setup_arch(void)
+{
+	printk(KERN_INFO "BUFFALO Network Attached Storage Series\n");
+	printk(KERN_INFO "(C) 2002-2005 BUFFALO INC.\n");
+}
+
+static void __init linkstation_setup_pci(void)
+{
+	struct device_node *np;
+
+	/* Lookup PCI host bridges */
+	for_each_compatible_node(np, "pci", "mpc10x-pci")
+		linkstation_add_bridge(np);
+}
+
+/*
+ * Interrupt setup and service.  Interrupts on the linkstation come
+ * from the four PCI slots plus onboard 8241 devices: I2C, DUART.
+ */
+static void __init linkstation_init_IRQ(void)
+{
+	struct mpic *mpic;
+
+	mpic = mpic_alloc(NULL, 0, 0, 4, 0, " EPIC     ");
+	BUG_ON(mpic == NULL);
+
+	/* PCI IRQs */
+	mpic_assign_isu(mpic, 0, mpic->paddr + 0x10200);
+
+	/* I2C */
+	mpic_assign_isu(mpic, 1, mpic->paddr + 0x11000);
+
+	/* ttyS0, ttyS1 */
+	mpic_assign_isu(mpic, 2, mpic->paddr + 0x11100);
+
+	mpic_init(mpic);
+}
+
+extern void avr_uart_configure(void);
+extern void avr_uart_send(const char);
+
+static void __noreturn linkstation_restart(char *cmd)
+{
+	local_irq_disable();
+
+	/* Reset system via AVR */
+	avr_uart_configure();
+	/* Send reboot command */
+	avr_uart_send('C');
+
+	for(;;)  /* Spin until reset happens */
+		avr_uart_send('G');	/* "kick" */
+}
+
+static void __noreturn linkstation_power_off(void)
+{
+	local_irq_disable();
+
+	/* Power down system via AVR */
+	avr_uart_configure();
+	/* send shutdown command */
+	avr_uart_send('E');
+
+	for(;;)  /* Spin until power-off happens */
+		avr_uart_send('G');	/* "kick" */
+	/* NOTREACHED */
+}
+
+static void __noreturn linkstation_halt(void)
+{
+	linkstation_power_off();
+	/* NOTREACHED */
+}
+
+static void linkstation_show_cpuinfo(struct seq_file *m)
+{
+	seq_printf(m, "vendor\t\t: Buffalo Technology\n");
+	seq_printf(m, "machine\t\t: Linkstation I/Kurobox(HG)\n");
+}
+
+static int __init linkstation_probe(void)
+{
+	if (!of_machine_is_compatible("linkstation"))
+		return 0;
+
+	pm_power_off = linkstation_power_off;
+
+	return 1;
+}
+
+define_machine(linkstation){
+	.name 			= "Buffalo Linkstation",
+	.probe 			= linkstation_probe,
+	.setup_arch 		= linkstation_setup_arch,
+	.discover_phbs		= linkstation_setup_pci,
+	.init_IRQ 		= linkstation_init_IRQ,
+	.show_cpuinfo 		= linkstation_show_cpuinfo,
+	.get_irq 		= mpic_get_irq,
+	.restart 		= linkstation_restart,
+	.halt	 		= linkstation_halt,
+	.calibrate_decr 	= generic_calibrate_decr,
+};
diff --git a/arch/powerpc/platforms/embedded6xx/ls_uart.c b/arch/powerpc/platforms/embedded6xx/ls_uart.c
new file mode 100644
index 000000000..4ecbc55b3
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/ls_uart.c
@@ -0,0 +1,144 @@
+/*
+ * AVR power-management chip interface for the Buffalo Linkstation /
+ * Kurobox Platform.
+ *
+ * Author: 2006 (c) G. Liakhovetski
+ *	 g.liakhovetski@gmx.de
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of
+ * any kind, whether express or implied.
+ */
+#include <linux/workqueue.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/serial_reg.h>
+#include <linux/serial_8250.h>
+#include <linux/of.h>
+#include <asm/io.h>
+#include <asm/termbits.h>
+
+#include "mpc10x.h"
+
+static void __iomem *avr_addr;
+static unsigned long avr_clock;
+
+static struct work_struct wd_work;
+
+static void wd_stop(struct work_struct *unused)
+{
+	const char string[] = "AAAAFFFFJJJJ>>>>VVVV>>>>ZZZZVVVVKKKK";
+	int i = 0, rescue = 8;
+	int len = strlen(string);
+
+	while (rescue--) {
+		int j;
+		char lsr = in_8(avr_addr + UART_LSR);
+
+		if (lsr & (UART_LSR_THRE | UART_LSR_TEMT)) {
+			for (j = 0; j < 16 && i < len; j++, i++)
+				out_8(avr_addr + UART_TX, string[i]);
+			if (i == len) {
+				/* Read "OK" back: 4ms for the last "KKKK"
+				   plus a couple bytes back */
+				msleep(7);
+				printk("linkstation: disarming the AVR watchdog: ");
+				while (in_8(avr_addr + UART_LSR) & UART_LSR_DR)
+					printk("%c", in_8(avr_addr + UART_RX));
+				break;
+			}
+		}
+		msleep(17);
+	}
+	printk("\n");
+}
+
+#define AVR_QUOT(clock) ((clock) + 8 * 9600) / (16 * 9600)
+
+void avr_uart_configure(void)
+{
+	unsigned char cval = UART_LCR_WLEN8;
+	unsigned int quot = AVR_QUOT(avr_clock);
+
+	if (!avr_addr || !avr_clock)
+		return;
+
+	out_8(avr_addr + UART_LCR, cval);			/* initialise UART */
+	out_8(avr_addr + UART_MCR, 0);
+	out_8(avr_addr + UART_IER, 0);
+
+	cval |= UART_LCR_STOP | UART_LCR_PARITY | UART_LCR_EPAR;
+
+	out_8(avr_addr + UART_LCR, cval);			/* Set character format */
+
+	out_8(avr_addr + UART_LCR, cval | UART_LCR_DLAB);	/* set DLAB */
+	out_8(avr_addr + UART_DLL, quot & 0xff);		/* LS of divisor */
+	out_8(avr_addr + UART_DLM, quot >> 8);			/* MS of divisor */
+	out_8(avr_addr + UART_LCR, cval);			/* reset DLAB */
+	out_8(avr_addr + UART_FCR, UART_FCR_ENABLE_FIFO);	/* enable FIFO */
+}
+
+void avr_uart_send(const char c)
+{
+	if (!avr_addr || !avr_clock)
+		return;
+
+	out_8(avr_addr + UART_TX, c);
+	out_8(avr_addr + UART_TX, c);
+	out_8(avr_addr + UART_TX, c);
+	out_8(avr_addr + UART_TX, c);
+}
+
+static void __init ls_uart_init(void)
+{
+	local_irq_disable();
+
+#ifndef CONFIG_SERIAL_8250
+	out_8(avr_addr + UART_FCR, UART_FCR_ENABLE_FIFO);	/* enable FIFO */
+	out_8(avr_addr + UART_FCR, UART_FCR_ENABLE_FIFO |
+	      UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);	/* clear FIFOs */
+	out_8(avr_addr + UART_FCR, 0);
+	out_8(avr_addr + UART_IER, 0);
+
+	/* Clear up interrupts */
+	(void) in_8(avr_addr + UART_LSR);
+	(void) in_8(avr_addr + UART_RX);
+	(void) in_8(avr_addr + UART_IIR);
+	(void) in_8(avr_addr + UART_MSR);
+#endif
+	avr_uart_configure();
+
+	local_irq_enable();
+}
+
+static int __init ls_uarts_init(void)
+{
+	struct device_node *avr;
+	phys_addr_t phys_addr;
+	int len;
+
+	avr = of_find_node_by_path("/soc10x/serial@80004500");
+	if (!avr)
+		return -EINVAL;
+
+	avr_clock = *(u32*)of_get_property(avr, "clock-frequency", &len);
+	phys_addr = ((u32*)of_get_property(avr, "reg", &len))[0];
+
+	of_node_put(avr);
+
+	if (!avr_clock || !phys_addr)
+		return -EINVAL;
+
+	avr_addr = ioremap(phys_addr, 32);
+	if (!avr_addr)
+		return -EFAULT;
+
+	ls_uart_init();
+
+	INIT_WORK(&wd_work, wd_stop);
+	schedule_work(&wd_work);
+
+	return 0;
+}
+
+machine_late_initcall(linkstation, ls_uarts_init);
diff --git a/arch/powerpc/platforms/embedded6xx/mpc10x.h b/arch/powerpc/platforms/embedded6xx/mpc10x.h
new file mode 100644
index 000000000..5ad12023e
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/mpc10x.h
@@ -0,0 +1,159 @@
+/*
+ * Common routines for the Motorola SPS MPC106/8240/107 Host bridge/Mem
+ * ctlr/EPIC/etc.
+ *
+ * Author: Mark A. Greer
+ *         mgreer@mvista.com
+ *
+ * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __PPC_KERNEL_MPC10X_H
+#define __PPC_KERNEL_MPC10X_H
+
+#include <linux/pci_ids.h>
+#include <asm/pci-bridge.h>
+
+/*
+ * The values here don't completely map everything but should work in most
+ * cases.
+ *
+ * MAP A (PReP Map)
+ *   Processor: 0x80000000 - 0x807fffff -> PCI I/O: 0x00000000 - 0x007fffff
+ *   Processor: 0xc0000000 - 0xdfffffff -> PCI MEM: 0x00000000 - 0x1fffffff
+ *   PCI MEM:   0x80000000 -> Processor System Memory: 0x00000000
+ *
+ * MAP B (CHRP Map)
+ *   Processor: 0xfe000000 - 0xfebfffff -> PCI I/O: 0x00000000 - 0x00bfffff
+ *   Processor: 0x80000000 - 0xbfffffff -> PCI MEM: 0x80000000 - 0xbfffffff
+ *   PCI MEM:   0x00000000 -> Processor System Memory: 0x00000000
+ */
+
+/*
+ * Define the vendor/device IDs for the various bridges--should be added to
+ * <linux/pci_ids.h>
+ */
+#define	MPC10X_BRIDGE_106	((PCI_DEVICE_ID_MOTOROLA_MPC106 << 16) |  \
+				  PCI_VENDOR_ID_MOTOROLA)
+#define	MPC10X_BRIDGE_8240	((0x0003 << 16) | PCI_VENDOR_ID_MOTOROLA)
+#define	MPC10X_BRIDGE_107	((0x0004 << 16) | PCI_VENDOR_ID_MOTOROLA)
+#define	MPC10X_BRIDGE_8245	((0x0006 << 16) | PCI_VENDOR_ID_MOTOROLA)
+
+/* Define the type of map to use */
+#define	MPC10X_MEM_MAP_A		1
+#define	MPC10X_MEM_MAP_B		2
+
+/* Map A (PReP Map) Defines */
+#define	MPC10X_MAPA_CNFG_ADDR		0x80000cf8
+#define	MPC10X_MAPA_CNFG_DATA		0x80000cfc
+
+#define MPC10X_MAPA_ISA_IO_BASE		0x80000000
+#define MPC10X_MAPA_ISA_MEM_BASE	0xc0000000
+#define	MPC10X_MAPA_DRAM_OFFSET		0x80000000
+
+#define	MPC10X_MAPA_PCI_INTACK_ADDR	0xbffffff0
+#define	MPC10X_MAPA_PCI_IO_START	0x00000000
+#define	MPC10X_MAPA_PCI_IO_END	       (0x00800000 - 1)
+#define	MPC10X_MAPA_PCI_MEM_START	0x00000000
+#define	MPC10X_MAPA_PCI_MEM_END	       (0x20000000 - 1)
+
+#define	MPC10X_MAPA_PCI_MEM_OFFSET	(MPC10X_MAPA_ISA_MEM_BASE -	\
+					 MPC10X_MAPA_PCI_MEM_START)
+
+/* Map B (CHRP Map) Defines */
+#define	MPC10X_MAPB_CNFG_ADDR		0xfec00000
+#define	MPC10X_MAPB_CNFG_DATA		0xfee00000
+
+#define MPC10X_MAPB_ISA_IO_BASE		0xfe000000
+#define MPC10X_MAPB_ISA_MEM_BASE	0x80000000
+#define	MPC10X_MAPB_DRAM_OFFSET		0x00000000
+
+#define	MPC10X_MAPB_PCI_INTACK_ADDR	0xfef00000
+#define	MPC10X_MAPB_PCI_IO_START	0x00000000
+#define	MPC10X_MAPB_PCI_IO_END	       (0x00c00000 - 1)
+#define	MPC10X_MAPB_PCI_MEM_START	0x80000000
+#define	MPC10X_MAPB_PCI_MEM_END	       (0xc0000000 - 1)
+
+#define	MPC10X_MAPB_PCI_MEM_OFFSET	(MPC10X_MAPB_ISA_MEM_BASE -	\
+					 MPC10X_MAPB_PCI_MEM_START)
+
+/* Miscellaneous Configuration register offsets */
+#define	MPC10X_CFG_PIR_REG		0x09
+#define	MPC10X_CFG_PIR_HOST_BRIDGE	0x00
+#define	MPC10X_CFG_PIR_AGENT		0x01
+
+#define	MPC10X_CFG_EUMBBAR		0x78
+
+#define	MPC10X_CFG_PICR1_REG		0xa8
+#define	MPC10X_CFG_PICR1_ADDR_MAP_MASK	0x00010000
+#define	MPC10X_CFG_PICR1_ADDR_MAP_A	0x00010000
+#define	MPC10X_CFG_PICR1_ADDR_MAP_B	0x00000000
+#define	MPC10X_CFG_PICR1_SPEC_PCI_RD	0x00000004
+#define	MPC10X_CFG_PICR1_ST_GATH_EN	0x00000040
+
+#define	MPC10X_CFG_PICR2_REG		0xac
+#define	MPC10X_CFG_PICR2_COPYBACK_OPT	0x00000001
+
+#define	MPC10X_CFG_MAPB_OPTIONS_REG	0xe0
+#define	MPC10X_CFG_MAPB_OPTIONS_CFAE	0x80	/* CPU_FD_ALIAS_EN */
+#define	MPC10X_CFG_MAPB_OPTIONS_PFAE	0x40	/* PCI_FD_ALIAS_EN */
+#define	MPC10X_CFG_MAPB_OPTIONS_DR	0x20	/* DLL_RESET */
+#define	MPC10X_CFG_MAPB_OPTIONS_PCICH	0x08	/* PCI_COMPATIBILITY_HOLE */
+#define	MPC10X_CFG_MAPB_OPTIONS_PROCCH	0x04	/* PROC_COMPATIBILITY_HOLE */
+
+/* Define offsets for the memory controller registers in the config space */
+#define MPC10X_MCTLR_MEM_START_1	0x80	/* Banks 0-3 */
+#define MPC10X_MCTLR_MEM_START_2	0x84	/* Banks 4-7 */
+#define MPC10X_MCTLR_EXT_MEM_START_1	0x88	/* Banks 0-3 */
+#define MPC10X_MCTLR_EXT_MEM_START_2	0x8c	/* Banks 4-7 */
+
+#define MPC10X_MCTLR_MEM_END_1		0x90	/* Banks 0-3 */
+#define MPC10X_MCTLR_MEM_END_2		0x94	/* Banks 4-7 */
+#define MPC10X_MCTLR_EXT_MEM_END_1	0x98	/* Banks 0-3 */
+#define MPC10X_MCTLR_EXT_MEM_END_2	0x9c	/* Banks 4-7 */
+
+#define MPC10X_MCTLR_MEM_BANK_ENABLES	0xa0
+
+/* Define some offset in the EUMB */
+#define	MPC10X_EUMB_SIZE		0x00100000 /* Total EUMB size (1MB) */
+
+#define MPC10X_EUMB_MU_OFFSET		0x00000000 /* Msg Unit reg offset */
+#define MPC10X_EUMB_MU_SIZE		0x00001000 /* Msg Unit reg size */
+#define MPC10X_EUMB_DMA_OFFSET		0x00001000 /* DMA Unit reg offset */
+#define MPC10X_EUMB_DMA_SIZE		0x00001000 /* DMA Unit reg size  */
+#define MPC10X_EUMB_ATU_OFFSET		0x00002000 /* Addr xlate reg offset */
+#define MPC10X_EUMB_ATU_SIZE		0x00001000 /* Addr xlate reg size  */
+#define MPC10X_EUMB_I2C_OFFSET		0x00003000 /* I2C Unit reg offset */
+#define MPC10X_EUMB_I2C_SIZE		0x00001000 /* I2C Unit reg size  */
+#define MPC10X_EUMB_DUART_OFFSET	0x00004000 /* DUART Unit reg offset (8245) */
+#define MPC10X_EUMB_DUART_SIZE		0x00001000 /* DUART Unit reg size (8245) */
+#define	MPC10X_EUMB_EPIC_OFFSET		0x00040000 /* EPIC offset in EUMB */
+#define	MPC10X_EUMB_EPIC_SIZE		0x00030000 /* EPIC size */
+#define MPC10X_EUMB_PM_OFFSET		0x000fe000 /* Performance Monitor reg offset (8245) */
+#define MPC10X_EUMB_PM_SIZE		0x00001000 /* Performance Monitor reg size (8245) */
+#define MPC10X_EUMB_WP_OFFSET		0x000ff000 /* Data path diagnostic, watchpoint reg offset */
+#define MPC10X_EUMB_WP_SIZE		0x00001000 /* Data path diagnostic, watchpoint reg size */
+
+enum ppc_sys_devices {
+	MPC10X_IIC1,
+	MPC10X_DMA0,
+	MPC10X_DMA1,
+	MPC10X_UART0,
+	MPC10X_UART1,
+	NUM_PPC_SYS_DEVS,
+};
+
+int mpc10x_bridge_init(struct pci_controller *hose,
+		       uint current_map,
+		       uint new_map,
+		       uint phys_eumb_base);
+unsigned long mpc10x_get_mem_size(uint mem_map);
+int mpc10x_enable_store_gathering(struct pci_controller *hose);
+int mpc10x_disable_store_gathering(struct pci_controller *hose);
+
+/* For MPC107 boards that use the built-in openpic */
+void mpc10x_set_openpic(void);
+
+#endif	/* __PPC_KERNEL_MPC10X_H */
diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
new file mode 100644
index 000000000..ddf0c652a
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * mpc7448_hpc2.c
+ *
+ * Board setup routines for the Freescale mpc7448hpc2(taiga) platform
+ *
+ * Author: Jacob Pan
+ *	 jacob.pan@freescale.com
+ * Author: Xianghua Xiao
+ *       x.xiao@freescale.com
+ * Maintainer: Roy Zang <tie-fei.zang@freescale.com>
+ * 	Add Flat Device Tree support fot mpc7448hpc2 board
+ *
+ * Copyright 2004-2006 Freescale Semiconductor, Inc.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/console.h>
+#include <linux/extable.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/serial.h>
+#include <linux/tty.h>
+#include <linux/serial_core.h>
+#include <linux/of_irq.h>
+
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/udbg.h>
+#include <asm/tsi108.h>
+#include <asm/pci-bridge.h>
+#include <asm/reg.h>
+#include <mm/mmu_decl.h>
+#include <asm/tsi108_pci.h>
+#include <asm/tsi108_irq.h>
+#include <asm/mpic.h>
+
+#undef DEBUG
+#ifdef DEBUG
+#define DBG(fmt...) do { printk(fmt); } while(0)
+#else
+#define DBG(fmt...) do { } while(0)
+#endif
+
+#define MPC7448HPC2_PCI_CFG_PHYS 0xfb000000
+
+int mpc7448_hpc2_exclude_device(struct pci_controller *hose,
+				u_char bus, u_char devfn)
+{
+	if (bus == 0 && PCI_SLOT(devfn) == 0)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	else
+		return PCIBIOS_SUCCESSFUL;
+}
+
+static void __init mpc7448_hpc2_setup_pci(void)
+{
+#ifdef CONFIG_PCI
+	struct device_node *np;
+	if (ppc_md.progress)
+		ppc_md.progress("mpc7448_hpc2_setup_pci():set_bridge", 0);
+
+	/* setup PCI host bridge */
+	for_each_compatible_node(np, "pci", "tsi108-pci")
+		tsi108_setup_pci(np, MPC7448HPC2_PCI_CFG_PHYS, 0);
+
+	ppc_md.pci_exclude_device = mpc7448_hpc2_exclude_device;
+	if (ppc_md.progress)
+		ppc_md.progress("tsi108: resources set", 0x100);
+#endif
+}
+
+static void __init mpc7448_hpc2_setup_arch(void)
+{
+	tsi108_csr_vir_base = get_vir_csrbase();
+
+	printk(KERN_INFO "MPC7448HPC2 (TAIGA) Platform\n");
+	printk(KERN_INFO
+	       "Jointly ported by Freescale and Tundra Semiconductor\n");
+	printk(KERN_INFO
+	       "Enabling L2 cache then enabling the HID0 prefetch engine.\n");
+}
+
+/*
+ * Interrupt setup and service.  Interrupts on the mpc7448_hpc2 come
+ * from the four external INT pins, PCI interrupts are routed via
+ * PCI interrupt control registers, it generates internal IRQ23
+ *
+ * Interrupt routing on the Taiga Board:
+ * TSI108:PB_INT[0] -> CPU0:INT#
+ * TSI108:PB_INT[1] -> CPU0:MCP#
+ * TSI108:PB_INT[2] -> N/C
+ * TSI108:PB_INT[3] -> N/C
+ */
+static void __init mpc7448_hpc2_init_IRQ(void)
+{
+	struct mpic *mpic;
+#ifdef CONFIG_PCI
+	unsigned int cascade_pci_irq;
+	struct device_node *tsi_pci;
+	struct device_node *cascade_node = NULL;
+#endif
+
+	mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
+			MPIC_SPV_EOI | MPIC_NO_PTHROU_DIS | MPIC_REGSET_TSI108,
+			24, 0,
+			"Tsi108_PIC");
+
+	BUG_ON(mpic == NULL);
+
+	mpic_assign_isu(mpic, 0, mpic->paddr + 0x100);
+
+	mpic_init(mpic);
+
+#ifdef CONFIG_PCI
+	tsi_pci = of_find_node_by_type(NULL, "pci");
+	if (tsi_pci == NULL) {
+		printk("%s: No tsi108 pci node found !\n", __func__);
+		return;
+	}
+	cascade_node = of_find_node_by_type(NULL, "pic-router");
+	if (cascade_node == NULL) {
+		printk("%s: No tsi108 pci cascade node found !\n", __func__);
+		return;
+	}
+
+	cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0);
+	DBG("%s: tsi108 cascade_pci_irq = 0x%x\n", __func__,
+	    (u32) cascade_pci_irq);
+	tsi108_pci_int_init(cascade_node);
+	irq_set_handler_data(cascade_pci_irq, mpic);
+	irq_set_chained_handler(cascade_pci_irq, tsi108_irq_cascade);
+
+	of_node_put(tsi_pci);
+	of_node_put(cascade_node);
+#endif
+	/* Configure MPIC outputs to CPU0 */
+	tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0);
+}
+
+void mpc7448_hpc2_show_cpuinfo(struct seq_file *m)
+{
+	seq_printf(m, "vendor\t\t: Freescale Semiconductor\n");
+}
+
+static void __noreturn mpc7448_hpc2_restart(char *cmd)
+{
+	local_irq_disable();
+
+	/* Set exception prefix high - to the firmware */
+	mtmsr(mfmsr() | MSR_IP);
+	isync();
+
+	for (;;) ;		/* Spin until reset happens */
+}
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init mpc7448_hpc2_probe(void)
+{
+	if (!of_machine_is_compatible("mpc74xx"))
+		return 0;
+	return 1;
+}
+
+static int mpc7448_machine_check_exception(struct pt_regs *regs)
+{
+	const struct exception_table_entry *entry;
+
+	/* Are we prepared to handle this fault */
+	if ((entry = search_exception_tables(regs->nip)) != NULL) {
+		tsi108_clear_pci_cfg_error();
+		regs_set_recoverable(regs);
+		regs_set_return_ip(regs, extable_fixup(entry));
+		return 1;
+	}
+	return 0;
+}
+
+define_machine(mpc7448_hpc2){
+	.name 			= "MPC7448 HPC2",
+	.probe 			= mpc7448_hpc2_probe,
+	.setup_arch 		= mpc7448_hpc2_setup_arch,
+	.discover_phbs		= mpc7448_hpc2_setup_pci,
+	.init_IRQ 		= mpc7448_hpc2_init_IRQ,
+	.show_cpuinfo 		= mpc7448_hpc2_show_cpuinfo,
+	.get_irq 		= mpic_get_irq,
+	.restart 		= mpc7448_hpc2_restart,
+	.calibrate_decr 	= generic_calibrate_decr,
+	.machine_check_exception= mpc7448_machine_check_exception,
+	.progress 		= udbg_progress,
+};
diff --git a/arch/powerpc/platforms/embedded6xx/mvme5100.c b/arch/powerpc/platforms/embedded6xx/mvme5100.c
new file mode 100644
index 000000000..4854cc592
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/mvme5100.c
@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Board setup routines for the Motorola/Emerson MVME5100.
+ *
+ * Copyright 2013 CSC Australia Pty. Ltd.
+ *
+ * Based on earlier code by:
+ *
+ *    Matt Porter, MontaVista Software Inc.
+ *    Copyright 2001 MontaVista Software Inc.
+ *
+ * Author: Stephen Chivers <schivers@csc.com>
+ */
+
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+
+#include <asm/i8259.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpic.h>
+#include <mm/mmu_decl.h>
+#include <asm/udbg.h>
+
+#define HAWK_MPIC_SIZE		0x00040000U
+#define MVME5100_PCI_MEM_OFFSET 0x00000000
+
+/* Board register addresses. */
+#define BOARD_STATUS_REG	0xfef88080
+#define BOARD_MODFAIL_REG	0xfef88090
+#define BOARD_MODRST_REG	0xfef880a0
+#define BOARD_TBEN_REG		0xfef880c0
+#define BOARD_SW_READ_REG	0xfef880e0
+#define BOARD_GEO_ADDR_REG	0xfef880e8
+#define BOARD_EXT_FEATURE1_REG	0xfef880f0
+#define BOARD_EXT_FEATURE2_REG	0xfef88100
+
+static phys_addr_t pci_membase;
+static u_char *restart;
+
+static void mvme5100_8259_cascade(struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	unsigned int cascade_irq = i8259_irq();
+
+	if (cascade_irq)
+		generic_handle_irq(cascade_irq);
+
+	chip->irq_eoi(&desc->irq_data);
+}
+
+static void __init mvme5100_pic_init(void)
+{
+	struct mpic *mpic;
+	struct device_node *np;
+	struct device_node *cp = NULL;
+	unsigned int cirq;
+	unsigned long intack = 0;
+	const u32 *prop = NULL;
+
+	np = of_find_node_by_type(NULL, "open-pic");
+	if (!np) {
+		pr_err("Could not find open-pic node\n");
+		return;
+	}
+
+	mpic = mpic_alloc(np, pci_membase, 0, 16, 256, " OpenPIC  ");
+
+	BUG_ON(mpic == NULL);
+	of_node_put(np);
+
+	mpic_assign_isu(mpic, 0, pci_membase + 0x10000);
+
+	mpic_init(mpic);
+
+	cp = of_find_compatible_node(NULL, NULL, "chrp,iic");
+	if (cp == NULL) {
+		pr_warn("mvme5100_pic_init: couldn't find i8259\n");
+		return;
+	}
+
+	cirq = irq_of_parse_and_map(cp, 0);
+	if (!cirq) {
+		pr_warn("mvme5100_pic_init: no cascade interrupt?\n");
+		return;
+	}
+
+	np = of_find_compatible_node(NULL, "pci", "mpc10x-pci");
+	if (np) {
+		prop = of_get_property(np, "8259-interrupt-acknowledge", NULL);
+
+		if (prop)
+			intack = prop[0];
+
+		of_node_put(np);
+	}
+
+	if (intack)
+		pr_debug("mvme5100_pic_init: PCI 8259 intack at 0x%016lx\n",
+		   intack);
+
+	i8259_init(cp, intack);
+	of_node_put(cp);
+	irq_set_chained_handler(cirq, mvme5100_8259_cascade);
+}
+
+static int __init mvme5100_add_bridge(struct device_node *dev)
+{
+	const int		*bus_range;
+	int			len;
+	struct pci_controller	*hose;
+	unsigned short		devid;
+
+	pr_info("Adding PCI host bridge %pOF\n", dev);
+
+	bus_range = of_get_property(dev, "bus-range", &len);
+
+	hose = pcibios_alloc_controller(dev);
+	if (hose == NULL)
+		return -ENOMEM;
+
+	hose->first_busno = bus_range ? bus_range[0] : 0;
+	hose->last_busno = bus_range ? bus_range[1] : 0xff;
+
+	setup_indirect_pci(hose, 0xfe000cf8, 0xfe000cfc, 0);
+
+	pci_process_bridge_OF_ranges(hose, dev, 1);
+
+	early_read_config_word(hose, 0, 0, PCI_DEVICE_ID, &devid);
+
+	if (devid != PCI_DEVICE_ID_MOTOROLA_HAWK) {
+		pr_err("HAWK PHB not present?\n");
+		return 0;
+	}
+
+	early_read_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_1, &pci_membase);
+
+	if (pci_membase == 0) {
+		pr_err("HAWK PHB mibar not correctly set?\n");
+		return 0;
+	}
+
+	pr_info("mvme5100_pic_init: pci_membase: %x\n", pci_membase);
+
+	return 0;
+}
+
+static const struct of_device_id mvme5100_of_bus_ids[] __initconst = {
+	{ .compatible = "hawk-bridge", },
+	{},
+};
+
+/*
+ * Setup the architecture
+ */
+static void __init mvme5100_setup_arch(void)
+{
+	if (ppc_md.progress)
+		ppc_md.progress("mvme5100_setup_arch()", 0);
+
+	restart = ioremap(BOARD_MODRST_REG, 4);
+}
+
+static void __init mvme5100_setup_pci(void)
+{
+	struct device_node *np;
+
+	for_each_compatible_node(np, "pci", "hawk-pci")
+		mvme5100_add_bridge(np);
+}
+
+static void mvme5100_show_cpuinfo(struct seq_file *m)
+{
+	seq_puts(m, "Vendor\t\t: Motorola/Emerson\n");
+	seq_puts(m, "Machine\t\t: MVME5100\n");
+}
+
+static void __noreturn mvme5100_restart(char *cmd)
+{
+
+	local_irq_disable();
+	mtmsr(mfmsr() | MSR_IP);
+
+	out_8((u_char *) restart, 0x01);
+
+	while (1)
+		;
+}
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init mvme5100_probe(void)
+{
+	return of_machine_is_compatible("MVME5100");
+}
+
+static int __init probe_of_platform_devices(void)
+{
+
+	of_platform_bus_probe(NULL, mvme5100_of_bus_ids, NULL);
+	return 0;
+}
+
+machine_device_initcall(mvme5100, probe_of_platform_devices);
+
+define_machine(mvme5100) {
+	.name			= "MVME5100",
+	.probe			= mvme5100_probe,
+	.setup_arch		= mvme5100_setup_arch,
+	.discover_phbs		= mvme5100_setup_pci,
+	.init_IRQ		= mvme5100_pic_init,
+	.show_cpuinfo		= mvme5100_show_cpuinfo,
+	.get_irq		= mpic_get_irq,
+	.restart		= mvme5100_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
diff --git a/arch/powerpc/platforms/embedded6xx/storcenter.c b/arch/powerpc/platforms/embedded6xx/storcenter.c
new file mode 100644
index 000000000..5f16e80b6
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/storcenter.c
@@ -0,0 +1,127 @@
+/*
+ * Board setup routines for the storcenter
+ *
+ * Copyright 2007 (C) Oyvind Repvik (nail@nslu2-linux.org)
+ * Copyright 2007 Andy Wilcox, Jon Loeliger
+ *
+ * Based on linkstation.c by G. Liakhovetski
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of
+ * any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/initrd.h>
+#include <linux/of_platform.h>
+
+#include <asm/time.h>
+#include <asm/mpic.h>
+#include <asm/pci-bridge.h>
+
+#include "mpc10x.h"
+
+
+static const struct of_device_id storcenter_of_bus[] __initconst = {
+	{ .name = "soc", },
+	{},
+};
+
+static int __init storcenter_device_probe(void)
+{
+	of_platform_bus_probe(NULL, storcenter_of_bus, NULL);
+	return 0;
+}
+machine_device_initcall(storcenter, storcenter_device_probe);
+
+
+static int __init storcenter_add_bridge(struct device_node *dev)
+{
+#ifdef CONFIG_PCI
+	int len;
+	struct pci_controller *hose;
+	const int *bus_range;
+
+	printk("Adding PCI host bridge %pOF\n", dev);
+
+	hose = pcibios_alloc_controller(dev);
+	if (hose == NULL)
+		return -ENOMEM;
+
+	bus_range = of_get_property(dev, "bus-range", &len);
+	hose->first_busno = bus_range ? bus_range[0] : 0;
+	hose->last_busno = bus_range ? bus_range[1] : 0xff;
+
+	setup_indirect_pci(hose, MPC10X_MAPB_CNFG_ADDR, MPC10X_MAPB_CNFG_DATA, 0);
+
+	/* Interpret the "ranges" property */
+	/* This also maps the I/O region and sets isa_io/mem_base */
+	pci_process_bridge_OF_ranges(hose, dev, 1);
+#endif
+
+	return 0;
+}
+
+static void __init storcenter_setup_arch(void)
+{
+	printk(KERN_INFO "IOMEGA StorCenter\n");
+}
+
+static void __init storcenter_setup_pci(void)
+{
+	struct device_node *np;
+
+	/* Lookup PCI host bridges */
+	for_each_compatible_node(np, "pci", "mpc10x-pci")
+		storcenter_add_bridge(np);
+}
+
+/*
+ * Interrupt setup and service.  Interrupts on the turbostation come
+ * from the four PCI slots plus onboard 8241 devices: I2C, DUART.
+ */
+static void __init storcenter_init_IRQ(void)
+{
+	struct mpic *mpic;
+
+	mpic = mpic_alloc(NULL, 0, 0, 16, 0, " OpenPIC  ");
+	BUG_ON(mpic == NULL);
+
+	/*
+	 * 16 Serial Interrupts followed by 16 Internal Interrupts.
+	 * I2C is the second internal, so it is at 17, 0x11020.
+	 */
+	mpic_assign_isu(mpic, 0, mpic->paddr + 0x10200);
+	mpic_assign_isu(mpic, 1, mpic->paddr + 0x11000);
+
+	mpic_init(mpic);
+}
+
+static void __noreturn storcenter_restart(char *cmd)
+{
+	local_irq_disable();
+
+	/* Set exception prefix high - to the firmware */
+	mtmsr(mfmsr() | MSR_IP);
+	isync();
+
+	/* Wait for reset to happen */
+	for (;;) ;
+}
+
+static int __init storcenter_probe(void)
+{
+	return of_machine_is_compatible("iomega,storcenter");
+}
+
+define_machine(storcenter){
+	.name 			= "IOMEGA StorCenter",
+	.probe 			= storcenter_probe,
+	.setup_arch 		= storcenter_setup_arch,
+	.discover_phbs 		= storcenter_setup_pci,
+	.init_IRQ 		= storcenter_init_IRQ,
+	.get_irq 		= mpic_get_irq,
+	.restart 		= storcenter_restart,
+	.calibrate_decr 	= generic_calibrate_decr,
+};
diff --git a/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c b/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c
new file mode 100644
index 000000000..e02bdabf3
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c
@@ -0,0 +1,324 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * arch/powerpc/platforms/embedded6xx/usbgecko_udbg.c
+ *
+ * udbg serial input/output routines for the USB Gecko adapter.
+ * Copyright (C) 2008-2009 The GameCube Linux Team
+ * Copyright (C) 2008,2009 Albert Herranz
+ */
+
+#include <linux/of_address.h>
+
+#include <mm/mmu_decl.h>
+
+#include <asm/io.h>
+#include <asm/udbg.h>
+#include <asm/fixmap.h>
+
+#include "usbgecko_udbg.h"
+
+
+#define EXI_CLK_32MHZ           5
+
+#define EXI_CSR                 0x00
+#define   EXI_CSR_CLKMASK       (0x7<<4)
+#define     EXI_CSR_CLK_32MHZ   (EXI_CLK_32MHZ<<4)
+#define   EXI_CSR_CSMASK        (0x7<<7)
+#define     EXI_CSR_CS_0        (0x1<<7)  /* Chip Select 001 */
+
+#define EXI_CR                  0x0c
+#define   EXI_CR_TSTART         (1<<0)
+#define   EXI_CR_WRITE		(1<<2)
+#define   EXI_CR_READ_WRITE     (2<<2)
+#define   EXI_CR_TLEN(len)      (((len)-1)<<4)
+
+#define EXI_DATA                0x10
+
+#define UG_READ_ATTEMPTS	100
+#define UG_WRITE_ATTEMPTS	100
+
+
+static void __iomem *ug_io_base;
+
+/*
+ * Performs one input/output transaction between the exi host and the usbgecko.
+ */
+static u32 ug_io_transaction(u32 in)
+{
+	u32 __iomem *csr_reg = ug_io_base + EXI_CSR;
+	u32 __iomem *data_reg = ug_io_base + EXI_DATA;
+	u32 __iomem *cr_reg = ug_io_base + EXI_CR;
+	u32 csr, data, cr;
+
+	/* select */
+	csr = EXI_CSR_CLK_32MHZ | EXI_CSR_CS_0;
+	out_be32(csr_reg, csr);
+
+	/* read/write */
+	data = in;
+	out_be32(data_reg, data);
+	cr = EXI_CR_TLEN(2) | EXI_CR_READ_WRITE | EXI_CR_TSTART;
+	out_be32(cr_reg, cr);
+
+	while (in_be32(cr_reg) & EXI_CR_TSTART)
+		barrier();
+
+	/* deselect */
+	out_be32(csr_reg, 0);
+
+	/* result */
+	data = in_be32(data_reg);
+
+	return data;
+}
+
+/*
+ * Returns true if an usbgecko adapter is found.
+ */
+static int ug_is_adapter_present(void)
+{
+	if (!ug_io_base)
+		return 0;
+
+	return ug_io_transaction(0x90000000) == 0x04700000;
+}
+
+/*
+ * Returns true if the TX fifo is ready for transmission.
+ */
+static int ug_is_txfifo_ready(void)
+{
+	return ug_io_transaction(0xc0000000) & 0x04000000;
+}
+
+/*
+ * Tries to transmit a character.
+ * If the TX fifo is not ready the result is undefined.
+ */
+static void ug_raw_putc(char ch)
+{
+	ug_io_transaction(0xb0000000 | (ch << 20));
+}
+
+/*
+ * Transmits a character.
+ * It silently fails if the TX fifo is not ready after a number of retries.
+ */
+static void ug_putc(char ch)
+{
+	int count = UG_WRITE_ATTEMPTS;
+
+	if (!ug_io_base)
+		return;
+
+	if (ch == '\n')
+		ug_putc('\r');
+
+	while (!ug_is_txfifo_ready() && count--)
+		barrier();
+	if (count >= 0)
+		ug_raw_putc(ch);
+}
+
+/*
+ * Returns true if the RX fifo is ready for transmission.
+ */
+static int ug_is_rxfifo_ready(void)
+{
+	return ug_io_transaction(0xd0000000) & 0x04000000;
+}
+
+/*
+ * Tries to receive a character.
+ * If a character is unavailable the function returns -1.
+ */
+static int ug_raw_getc(void)
+{
+	u32 data = ug_io_transaction(0xa0000000);
+	if (data & 0x08000000)
+		return (data >> 16) & 0xff;
+	else
+		return -1;
+}
+
+/*
+ * Receives a character.
+ * It fails if the RX fifo is not ready after a number of retries.
+ */
+static int ug_getc(void)
+{
+	int count = UG_READ_ATTEMPTS;
+
+	if (!ug_io_base)
+		return -1;
+
+	while (!ug_is_rxfifo_ready() && count--)
+		barrier();
+	return ug_raw_getc();
+}
+
+/*
+ * udbg functions.
+ *
+ */
+
+/*
+ * Transmits a character.
+ */
+static void ug_udbg_putc(char ch)
+{
+	ug_putc(ch);
+}
+
+/*
+ * Receives a character. Waits until a character is available.
+ */
+static int ug_udbg_getc(void)
+{
+	int ch;
+
+	while ((ch = ug_getc()) == -1)
+		barrier();
+	return ch;
+}
+
+/*
+ * Receives a character. If a character is not available, returns -1.
+ */
+static int ug_udbg_getc_poll(void)
+{
+	if (!ug_is_rxfifo_ready())
+		return -1;
+	return ug_getc();
+}
+
+/*
+ * Retrieves and prepares the virtual address needed to access the hardware.
+ */
+static void __iomem *__init ug_udbg_setup_exi_io_base(struct device_node *np)
+{
+	void __iomem *exi_io_base = NULL;
+	phys_addr_t paddr;
+	const unsigned int *reg;
+
+	reg = of_get_property(np, "reg", NULL);
+	if (reg) {
+		paddr = of_translate_address(np, reg);
+		if (paddr)
+			exi_io_base = ioremap(paddr, reg[1]);
+	}
+	return exi_io_base;
+}
+
+/*
+ * Checks if a USB Gecko adapter is inserted in any memory card slot.
+ */
+static void __iomem *__init ug_udbg_probe(void __iomem *exi_io_base)
+{
+	int i;
+
+	/* look for a usbgecko on memcard slots A and B */
+	for (i = 0; i < 2; i++) {
+		ug_io_base = exi_io_base + 0x14 * i;
+		if (ug_is_adapter_present())
+			break;
+	}
+	if (i == 2)
+		ug_io_base = NULL;
+	return ug_io_base;
+
+}
+
+/*
+ * USB Gecko udbg support initialization.
+ */
+void __init ug_udbg_init(void)
+{
+	struct device_node *np;
+	void __iomem *exi_io_base;
+
+	if (ug_io_base)
+		udbg_printf("%s: early -> final\n", __func__);
+
+	np = of_find_compatible_node(NULL, NULL, "nintendo,flipper-exi");
+	if (!np) {
+		udbg_printf("%s: EXI node not found\n", __func__);
+		goto out;
+	}
+
+	exi_io_base = ug_udbg_setup_exi_io_base(np);
+	if (!exi_io_base) {
+		udbg_printf("%s: failed to setup EXI io base\n", __func__);
+		goto done;
+	}
+
+	if (!ug_udbg_probe(exi_io_base)) {
+		udbg_printf("usbgecko_udbg: not found\n");
+		iounmap(exi_io_base);
+	} else {
+		udbg_putc = ug_udbg_putc;
+		udbg_getc = ug_udbg_getc;
+		udbg_getc_poll = ug_udbg_getc_poll;
+		udbg_printf("usbgecko_udbg: ready\n");
+	}
+
+done:
+	of_node_put(np);
+out:
+	return;
+}
+
+#ifdef CONFIG_PPC_EARLY_DEBUG_USBGECKO
+
+static phys_addr_t __init ug_early_grab_io_addr(void)
+{
+#if defined(CONFIG_GAMECUBE)
+	return 0x0c000000;
+#elif defined(CONFIG_WII)
+	return 0x0d000000;
+#else
+#error Invalid platform for USB Gecko based early debugging.
+#endif
+}
+
+/*
+ * USB Gecko early debug support initialization for udbg.
+ */
+void __init udbg_init_usbgecko(void)
+{
+	void __iomem *early_debug_area;
+	void __iomem *exi_io_base;
+
+	/*
+	 * At this point we have a BAT already setup that enables I/O
+	 * to the EXI hardware.
+	 *
+	 * The BAT uses a virtual address range reserved at the fixmap.
+	 * This must match the virtual address configured in
+	 * head_32.S:setup_usbgecko_bat().
+	 */
+	early_debug_area = (void __iomem *)__fix_to_virt(FIX_EARLY_DEBUG_BASE);
+	exi_io_base = early_debug_area + 0x00006800;
+
+	/* try to detect a USB Gecko */
+	if (!ug_udbg_probe(exi_io_base))
+		return;
+
+	/* we found a USB Gecko, load udbg hooks */
+	udbg_putc = ug_udbg_putc;
+	udbg_getc = ug_udbg_getc;
+	udbg_getc_poll = ug_udbg_getc_poll;
+
+	/*
+	 * Prepare again the same BAT for MMU_init.
+	 * This allows udbg I/O to continue working after the MMU is
+	 * turned on for real.
+	 * It is safe to continue using the same virtual address as it is
+	 * a reserved fixmap area.
+	 */
+	setbat(1, (unsigned long)early_debug_area,
+	       ug_early_grab_io_addr(), 128*1024, PAGE_KERNEL_NCG);
+}
+
+#endif /* CONFIG_PPC_EARLY_DEBUG_USBGECKO */
+
diff --git a/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.h b/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.h
new file mode 100644
index 000000000..bceb11911
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/usbgecko_udbg.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * arch/powerpc/platforms/embedded6xx/usbgecko_udbg.h
+ *
+ * udbg serial input/output routines for the USB Gecko adapter.
+ * Copyright (C) 2008-2009 The GameCube Linux Team
+ * Copyright (C) 2008,2009 Albert Herranz
+ */
+
+#ifndef __USBGECKO_UDBG_H
+#define __USBGECKO_UDBG_H
+
+#ifdef CONFIG_USBGECKO_UDBG
+
+extern void __init ug_udbg_init(void);
+
+#else
+
+static inline void __init ug_udbg_init(void)
+{
+}
+
+#endif /* CONFIG_USBGECKO_UDBG */
+
+void __init udbg_init_usbgecko(void);
+
+#endif /* __USBGECKO_UDBG_H */
diff --git a/arch/powerpc/platforms/embedded6xx/wii.c b/arch/powerpc/platforms/embedded6xx/wii.c
new file mode 100644
index 000000000..219659f2e
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/wii.c
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * arch/powerpc/platforms/embedded6xx/wii.c
+ *
+ * Nintendo Wii board-specific support
+ * Copyright (C) 2008-2009 The GameCube Linux Team
+ * Copyright (C) 2008,2009 Albert Herranz
+ */
+#define DRV_MODULE_NAME "wii"
+#define pr_fmt(fmt) DRV_MODULE_NAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/seq_file.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/time.h>
+#include <asm/udbg.h>
+
+#include "flipper-pic.h"
+#include "hlwd-pic.h"
+#include "usbgecko_udbg.h"
+
+/* control block */
+#define HW_CTRL_COMPATIBLE	"nintendo,hollywood-control"
+
+#define HW_CTRL_RESETS		0x94
+#define HW_CTRL_RESETS_SYS	(1<<0)
+
+/* gpio */
+#define HW_GPIO_COMPATIBLE	"nintendo,hollywood-gpio"
+
+#define HW_GPIO_BASE(idx)	(idx * 0x20)
+#define HW_GPIO_OUT(idx)	(HW_GPIO_BASE(idx) + 0)
+#define HW_GPIO_DIR(idx)	(HW_GPIO_BASE(idx) + 4)
+#define HW_GPIO_OWNER		(HW_GPIO_BASE(1) + 0x1c)
+
+#define HW_GPIO_SHUTDOWN	(1<<1)
+#define HW_GPIO_SLOT_LED	(1<<5)
+#define HW_GPIO_SENSOR_BAR	(1<<8)
+
+
+static void __iomem *hw_ctrl;
+static void __iomem *hw_gpio;
+
+static void __noreturn wii_spin(void)
+{
+	local_irq_disable();
+	for (;;)
+		cpu_relax();
+}
+
+static void __iomem *__init wii_ioremap_hw_regs(char *name, char *compatible)
+{
+	void __iomem *hw_regs = NULL;
+	struct device_node *np;
+	struct resource res;
+	int error = -ENODEV;
+
+	np = of_find_compatible_node(NULL, NULL, compatible);
+	if (!np) {
+		pr_err("no compatible node found for %s\n", compatible);
+		goto out;
+	}
+	error = of_address_to_resource(np, 0, &res);
+	if (error) {
+		pr_err("no valid reg found for %pOFn\n", np);
+		goto out_put;
+	}
+
+	hw_regs = ioremap(res.start, resource_size(&res));
+	if (hw_regs) {
+		pr_info("%s at 0x%pa mapped to 0x%p\n", name,
+			&res.start, hw_regs);
+	}
+
+out_put:
+	of_node_put(np);
+out:
+	return hw_regs;
+}
+
+static void __init wii_setup_arch(void)
+{
+	hw_ctrl = wii_ioremap_hw_regs("hw_ctrl", HW_CTRL_COMPATIBLE);
+	hw_gpio = wii_ioremap_hw_regs("hw_gpio", HW_GPIO_COMPATIBLE);
+	if (hw_gpio) {
+		/* turn off the front blue led and IR light */
+		clrbits32(hw_gpio + HW_GPIO_OUT(0),
+			  HW_GPIO_SLOT_LED | HW_GPIO_SENSOR_BAR);
+	}
+}
+
+static void __noreturn wii_restart(char *cmd)
+{
+	local_irq_disable();
+
+	if (hw_ctrl) {
+		/* clear the system reset pin to cause a reset */
+		clrbits32(hw_ctrl + HW_CTRL_RESETS, HW_CTRL_RESETS_SYS);
+	}
+	wii_spin();
+}
+
+static void wii_power_off(void)
+{
+	local_irq_disable();
+
+	if (hw_gpio) {
+		/*
+		 * set the owner of the shutdown pin to ARM, because it is
+		 * accessed through the registers for the ARM, below
+		 */
+		clrbits32(hw_gpio + HW_GPIO_OWNER, HW_GPIO_SHUTDOWN);
+
+		/* make sure that the poweroff GPIO is configured as output */
+		setbits32(hw_gpio + HW_GPIO_DIR(1), HW_GPIO_SHUTDOWN);
+
+		/* drive the poweroff GPIO high */
+		setbits32(hw_gpio + HW_GPIO_OUT(1), HW_GPIO_SHUTDOWN);
+	}
+	wii_spin();
+}
+
+static void __noreturn wii_halt(void)
+{
+	if (ppc_md.restart)
+		ppc_md.restart(NULL);
+	wii_spin();
+}
+
+static void __init wii_pic_probe(void)
+{
+	flipper_pic_probe();
+	hlwd_pic_probe();
+}
+
+static int __init wii_probe(void)
+{
+	if (!of_machine_is_compatible("nintendo,wii"))
+		return 0;
+
+	pm_power_off = wii_power_off;
+
+	ug_udbg_init();
+
+	return 1;
+}
+
+static void wii_shutdown(void)
+{
+	hlwd_quiesce();
+	flipper_quiesce();
+}
+
+static const struct of_device_id wii_of_bus[] = {
+	{ .compatible = "nintendo,hollywood", },
+	{ },
+};
+
+static int __init wii_device_probe(void)
+{
+	if (!machine_is(wii))
+		return 0;
+
+	of_platform_populate(NULL, wii_of_bus, NULL, NULL);
+	return 0;
+}
+device_initcall(wii_device_probe);
+
+define_machine(wii) {
+	.name			= "wii",
+	.probe			= wii_probe,
+	.setup_arch		= wii_setup_arch,
+	.restart		= wii_restart,
+	.halt			= wii_halt,
+	.init_IRQ		= wii_pic_probe,
+	.get_irq		= flipper_pic_get_irq,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+	.machine_shutdown	= wii_shutdown,
+};