diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
commit | 2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch) | |
tree | 848558de17fb3008cdf4d861b01ac7781903ce39 /arch/x86/math-emu/fpu_entry.c | |
parent | Initial commit. (diff) | |
download | linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip |
Adding upstream version 6.1.76.upstream/6.1.76upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'arch/x86/math-emu/fpu_entry.c')
-rw-r--r-- | arch/x86/math-emu/fpu_entry.c | 717 |
1 files changed, 717 insertions, 0 deletions
diff --git a/arch/x86/math-emu/fpu_entry.c b/arch/x86/math-emu/fpu_entry.c new file mode 100644 index 000000000..7fe56c594 --- /dev/null +++ b/arch/x86/math-emu/fpu_entry.c @@ -0,0 +1,717 @@ +// SPDX-License-Identifier: GPL-2.0 +/*---------------------------------------------------------------------------+ + | fpu_entry.c | + | | + | The entry functions for wm-FPU-emu | + | | + | Copyright (C) 1992,1993,1994,1996,1997 | + | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, Australia | + | E-mail billm@suburbia.net | + | | + | See the files "README" and "COPYING" for further copyright and warranty | + | information. | + | | + +---------------------------------------------------------------------------*/ + +/*---------------------------------------------------------------------------+ + | Note: | + | The file contains code which accesses user memory. | + | Emulator static data may change when user memory is accessed, due to | + | other processes using the emulator while swapping is in progress. | + +---------------------------------------------------------------------------*/ + +/*---------------------------------------------------------------------------+ + | math_emulate(), restore_i387_soft() and save_i387_soft() are the only | + | entry points for wm-FPU-emu. | + +---------------------------------------------------------------------------*/ + +#include <linux/signal.h> +#include <linux/regset.h> + +#include <linux/uaccess.h> +#include <asm/traps.h> +#include <asm/user.h> +#include <asm/fpu/api.h> + +#include "fpu_system.h" +#include "fpu_emu.h" +#include "exception.h" +#include "control_w.h" +#include "status_w.h" + +#define __BAD__ FPU_illegal /* Illegal on an 80486, causes SIGILL */ + +/* fcmovCC and f(u)comi(p) are enabled if CPUID(1).EDX(15) "cmov" is set */ + +/* WARNING: "u" entries are not documented by Intel in their 80486 manual + and may not work on FPU clones or later Intel FPUs. + Changes to support them provided by Linus Torvalds. */ + +static FUNC const st_instr_table[64] = { +/* Opcode: d8 d9 da db */ +/* dc dd de df */ +/* c0..7 */ fadd__, fld_i_, fcmovb, fcmovnb, +/* c0..7 */ fadd_i, ffree_, faddp_, ffreep,/*u*/ +/* c8..f */ fmul__, fxch_i, fcmove, fcmovne, +/* c8..f */ fmul_i, fxch_i,/*u*/ fmulp_, fxch_i,/*u*/ +/* d0..7 */ fcom_st, fp_nop, fcmovbe, fcmovnbe, +/* d0..7 */ fcom_st,/*u*/ fst_i_, fcompst,/*u*/ fstp_i,/*u*/ +/* d8..f */ fcompst, fstp_i,/*u*/ fcmovu, fcmovnu, +/* d8..f */ fcompst,/*u*/ fstp_i, fcompp, fstp_i,/*u*/ +/* e0..7 */ fsub__, FPU_etc, __BAD__, finit_, +/* e0..7 */ fsubri, fucom_, fsubrp, fstsw_, +/* e8..f */ fsubr_, fconst, fucompp, fucomi_, +/* e8..f */ fsub_i, fucomp, fsubp_, fucomip, +/* f0..7 */ fdiv__, FPU_triga, __BAD__, fcomi_, +/* f0..7 */ fdivri, __BAD__, fdivrp, fcomip, +/* f8..f */ fdivr_, FPU_trigb, __BAD__, __BAD__, +/* f8..f */ fdiv_i, __BAD__, fdivp_, __BAD__, +}; + +#define _NONE_ 0 /* Take no special action */ +#define _REG0_ 1 /* Need to check for not empty st(0) */ +#define _REGI_ 2 /* Need to check for not empty st(0) and st(rm) */ +#define _REGi_ 0 /* Uses st(rm) */ +#define _PUSH_ 3 /* Need to check for space to push onto stack */ +#define _null_ 4 /* Function illegal or not implemented */ +#define _REGIi 5 /* Uses st(0) and st(rm), result to st(rm) */ +#define _REGIp 6 /* Uses st(0) and st(rm), result to st(rm) then pop */ +#define _REGIc 0 /* Compare st(0) and st(rm) */ +#define _REGIn 0 /* Uses st(0) and st(rm), but handle checks later */ + +static u_char const type_table[64] = { +/* Opcode: d8 d9 da db dc dd de df */ +/* c0..7 */ _REGI_, _NONE_, _REGIn, _REGIn, _REGIi, _REGi_, _REGIp, _REGi_, +/* c8..f */ _REGI_, _REGIn, _REGIn, _REGIn, _REGIi, _REGI_, _REGIp, _REGI_, +/* d0..7 */ _REGIc, _NONE_, _REGIn, _REGIn, _REGIc, _REG0_, _REGIc, _REG0_, +/* d8..f */ _REGIc, _REG0_, _REGIn, _REGIn, _REGIc, _REG0_, _REGIc, _REG0_, +/* e0..7 */ _REGI_, _NONE_, _null_, _NONE_, _REGIi, _REGIc, _REGIp, _NONE_, +/* e8..f */ _REGI_, _NONE_, _REGIc, _REGIc, _REGIi, _REGIc, _REGIp, _REGIc, +/* f0..7 */ _REGI_, _NONE_, _null_, _REGIc, _REGIi, _null_, _REGIp, _REGIc, +/* f8..f */ _REGI_, _NONE_, _null_, _null_, _REGIi, _null_, _REGIp, _null_, +}; + +#ifdef RE_ENTRANT_CHECKING +u_char emulating = 0; +#endif /* RE_ENTRANT_CHECKING */ + +static int valid_prefix(u_char *Byte, u_char __user ** fpu_eip, + overrides * override); + +void math_emulate(struct math_emu_info *info) +{ + u_char FPU_modrm, byte1; + unsigned short code; + fpu_addr_modes addr_modes; + int unmasked; + FPU_REG loaded_data; + FPU_REG *st0_ptr; + u_char loaded_tag, st0_tag; + void __user *data_address; + struct address data_sel_off; + struct address entry_sel_off; + unsigned long code_base = 0; + unsigned long code_limit = 0; /* Initialized to stop compiler warnings */ + struct desc_struct code_descriptor; + +#ifdef RE_ENTRANT_CHECKING + if (emulating) { + printk("ERROR: wm-FPU-emu is not RE-ENTRANT!\n"); + } + RE_ENTRANT_CHECK_ON; +#endif /* RE_ENTRANT_CHECKING */ + + FPU_info = info; + + FPU_ORIG_EIP = FPU_EIP; + + if ((FPU_EFLAGS & 0x00020000) != 0) { + /* Virtual 8086 mode */ + addr_modes.default_mode = VM86; + FPU_EIP += code_base = FPU_CS << 4; + code_limit = code_base + 0xffff; /* Assumes code_base <= 0xffff0000 */ + } else if (FPU_CS == __USER_CS && FPU_DS == __USER_DS) { + addr_modes.default_mode = 0; + } else if (FPU_CS == __KERNEL_CS) { + printk("math_emulate: %04x:%08lx\n", FPU_CS, FPU_EIP); + panic("Math emulation needed in kernel"); + } else { + + if ((FPU_CS & 4) != 4) { /* Must be in the LDT */ + /* Can only handle segmented addressing via the LDT + for now, and it must be 16 bit */ + printk("FPU emulator: Unsupported addressing mode\n"); + math_abort(FPU_info, SIGILL); + } + + code_descriptor = FPU_get_ldt_descriptor(FPU_CS); + if (code_descriptor.d) { + /* The above test may be wrong, the book is not clear */ + /* Segmented 32 bit protected mode */ + addr_modes.default_mode = SEG32; + } else { + /* 16 bit protected mode */ + addr_modes.default_mode = PM16; + } + FPU_EIP += code_base = seg_get_base(&code_descriptor); + code_limit = seg_get_limit(&code_descriptor) + 1; + code_limit *= seg_get_granularity(&code_descriptor); + code_limit += code_base - 1; + if (code_limit < code_base) + code_limit = 0xffffffff; + } + + FPU_lookahead = !(FPU_EFLAGS & X86_EFLAGS_TF); + + if (!valid_prefix(&byte1, (u_char __user **) & FPU_EIP, + &addr_modes.override)) { + RE_ENTRANT_CHECK_OFF; + printk + ("FPU emulator: Unknown prefix byte 0x%02x, probably due to\n" + "FPU emulator: self-modifying code! (emulation impossible)\n", + byte1); + RE_ENTRANT_CHECK_ON; + EXCEPTION(EX_INTERNAL | 0x126); + math_abort(FPU_info, SIGILL); + } + + do_another_FPU_instruction: + + no_ip_update = 0; + + FPU_EIP++; /* We have fetched the prefix and first code bytes. */ + + if (addr_modes.default_mode) { + /* This checks for the minimum instruction bytes. + We also need to check any extra (address mode) code access. */ + if (FPU_EIP > code_limit) + math_abort(FPU_info, SIGSEGV); + } + + if ((byte1 & 0xf8) != 0xd8) { + if (byte1 == FWAIT_OPCODE) { + if (partial_status & SW_Summary) + goto do_the_FPU_interrupt; + else + goto FPU_fwait_done; + } +#ifdef PARANOID + EXCEPTION(EX_INTERNAL | 0x128); + math_abort(FPU_info, SIGILL); +#endif /* PARANOID */ + } + + RE_ENTRANT_CHECK_OFF; + FPU_code_access_ok(1); + FPU_get_user(FPU_modrm, (u_char __user *) FPU_EIP); + RE_ENTRANT_CHECK_ON; + FPU_EIP++; + + if (partial_status & SW_Summary) { + /* Ignore the error for now if the current instruction is a no-wait + control instruction */ + /* The 80486 manual contradicts itself on this topic, + but a real 80486 uses the following instructions: + fninit, fnstenv, fnsave, fnstsw, fnstenv, fnclex. + */ + code = (FPU_modrm << 8) | byte1; + if (!((((code & 0xf803) == 0xe003) || /* fnclex, fninit, fnstsw */ + (((code & 0x3003) == 0x3001) && /* fnsave, fnstcw, fnstenv, + fnstsw */ + ((code & 0xc000) != 0xc000))))) { + /* + * We need to simulate the action of the kernel to FPU + * interrupts here. + */ + do_the_FPU_interrupt: + + FPU_EIP = FPU_ORIG_EIP; /* Point to current FPU instruction. */ + + RE_ENTRANT_CHECK_OFF; + current->thread.trap_nr = X86_TRAP_MF; + current->thread.error_code = 0; + send_sig(SIGFPE, current, 1); + return; + } + } + + entry_sel_off.offset = FPU_ORIG_EIP; + entry_sel_off.selector = FPU_CS; + entry_sel_off.opcode = (byte1 << 8) | FPU_modrm; + entry_sel_off.empty = 0; + + FPU_rm = FPU_modrm & 7; + + if (FPU_modrm < 0300) { + /* All of these instructions use the mod/rm byte to get a data address */ + + if ((addr_modes.default_mode & SIXTEEN) + ^ (addr_modes.override.address_size == ADDR_SIZE_PREFIX)) + data_address = + FPU_get_address_16(FPU_modrm, &FPU_EIP, + &data_sel_off, addr_modes); + else + data_address = + FPU_get_address(FPU_modrm, &FPU_EIP, &data_sel_off, + addr_modes); + + if (addr_modes.default_mode) { + if (FPU_EIP - 1 > code_limit) + math_abort(FPU_info, SIGSEGV); + } + + if (!(byte1 & 1)) { + unsigned short status1 = partial_status; + + st0_ptr = &st(0); + st0_tag = FPU_gettag0(); + + /* Stack underflow has priority */ + if (NOT_EMPTY_ST0) { + if (addr_modes.default_mode & PROTECTED) { + /* This table works for 16 and 32 bit protected mode */ + if (access_limit < + data_sizes_16[(byte1 >> 1) & 3]) + math_abort(FPU_info, SIGSEGV); + } + + unmasked = 0; /* Do this here to stop compiler warnings. */ + switch ((byte1 >> 1) & 3) { + case 0: + unmasked = + FPU_load_single((float __user *) + data_address, + &loaded_data); + loaded_tag = unmasked & 0xff; + unmasked &= ~0xff; + break; + case 1: + loaded_tag = + FPU_load_int32((long __user *) + data_address, + &loaded_data); + break; + case 2: + unmasked = + FPU_load_double((double __user *) + data_address, + &loaded_data); + loaded_tag = unmasked & 0xff; + unmasked &= ~0xff; + break; + case 3: + default: /* Used here to suppress gcc warnings. */ + loaded_tag = + FPU_load_int16((short __user *) + data_address, + &loaded_data); + break; + } + + /* No more access to user memory, it is safe + to use static data now */ + + /* NaN operands have the next priority. */ + /* We have to delay looking at st(0) until after + loading the data, because that data might contain an SNaN */ + if (((st0_tag == TAG_Special) && isNaN(st0_ptr)) + || ((loaded_tag == TAG_Special) + && isNaN(&loaded_data))) { + /* Restore the status word; we might have loaded a + denormal. */ + partial_status = status1; + if ((FPU_modrm & 0x30) == 0x10) { + /* fcom or fcomp */ + EXCEPTION(EX_Invalid); + setcc(SW_C3 | SW_C2 | SW_C0); + if ((FPU_modrm & 0x08) + && (control_word & + CW_Invalid)) + FPU_pop(); /* fcomp, masked, so we pop. */ + } else { + if (loaded_tag == TAG_Special) + loaded_tag = + FPU_Special + (&loaded_data); +#ifdef PECULIAR_486 + /* This is not really needed, but gives behaviour + identical to an 80486 */ + if ((FPU_modrm & 0x28) == 0x20) + /* fdiv or fsub */ + real_2op_NaN + (&loaded_data, + loaded_tag, 0, + &loaded_data); + else +#endif /* PECULIAR_486 */ + /* fadd, fdivr, fmul, or fsubr */ + real_2op_NaN + (&loaded_data, + loaded_tag, 0, + st0_ptr); + } + goto reg_mem_instr_done; + } + + if (unmasked && !((FPU_modrm & 0x30) == 0x10)) { + /* Is not a comparison instruction. */ + if ((FPU_modrm & 0x38) == 0x38) { + /* fdivr */ + if ((st0_tag == TAG_Zero) && + ((loaded_tag == TAG_Valid) + || (loaded_tag == + TAG_Special + && + isdenormal + (&loaded_data)))) { + if (FPU_divide_by_zero + (0, + getsign + (&loaded_data)) + < 0) { + /* We use the fact here that the unmasked + exception in the loaded data was for a + denormal operand */ + /* Restore the state of the denormal op bit */ + partial_status + &= + ~SW_Denorm_Op; + partial_status + |= + status1 & + SW_Denorm_Op; + } else + setsign(st0_ptr, + getsign + (&loaded_data)); + } + } + goto reg_mem_instr_done; + } + + switch ((FPU_modrm >> 3) & 7) { + case 0: /* fadd */ + clear_C1(); + FPU_add(&loaded_data, loaded_tag, 0, + control_word); + break; + case 1: /* fmul */ + clear_C1(); + FPU_mul(&loaded_data, loaded_tag, 0, + control_word); + break; + case 2: /* fcom */ + FPU_compare_st_data(&loaded_data, + loaded_tag); + break; + case 3: /* fcomp */ + if (!FPU_compare_st_data + (&loaded_data, loaded_tag) + && !unmasked) + FPU_pop(); + break; + case 4: /* fsub */ + clear_C1(); + FPU_sub(LOADED | loaded_tag, + (int)&loaded_data, + control_word); + break; + case 5: /* fsubr */ + clear_C1(); + FPU_sub(REV | LOADED | loaded_tag, + (int)&loaded_data, + control_word); + break; + case 6: /* fdiv */ + clear_C1(); + FPU_div(LOADED | loaded_tag, + (int)&loaded_data, + control_word); + break; + case 7: /* fdivr */ + clear_C1(); + if (st0_tag == TAG_Zero) + partial_status = status1; /* Undo any denorm tag, + zero-divide has priority. */ + FPU_div(REV | LOADED | loaded_tag, + (int)&loaded_data, + control_word); + break; + } + } else { + if ((FPU_modrm & 0x30) == 0x10) { + /* The instruction is fcom or fcomp */ + EXCEPTION(EX_StackUnder); + setcc(SW_C3 | SW_C2 | SW_C0); + if ((FPU_modrm & 0x08) + && (control_word & CW_Invalid)) + FPU_pop(); /* fcomp */ + } else + FPU_stack_underflow(); + } + reg_mem_instr_done: + operand_address = data_sel_off; + } else { + if (!(no_ip_update = + FPU_load_store(((FPU_modrm & 0x38) | (byte1 & 6)) + >> 1, addr_modes, data_address))) { + operand_address = data_sel_off; + } + } + + } else { + /* None of these instructions access user memory */ + u_char instr_index = (FPU_modrm & 0x38) | (byte1 & 7); + +#ifdef PECULIAR_486 + /* This is supposed to be undefined, but a real 80486 seems + to do this: */ + operand_address.offset = 0; + operand_address.selector = FPU_DS; +#endif /* PECULIAR_486 */ + + st0_ptr = &st(0); + st0_tag = FPU_gettag0(); + switch (type_table[(int)instr_index]) { + case _NONE_: /* also _REGIc: _REGIn */ + break; + case _REG0_: + if (!NOT_EMPTY_ST0) { + FPU_stack_underflow(); + goto FPU_instruction_done; + } + break; + case _REGIi: + if (!NOT_EMPTY_ST0 || !NOT_EMPTY(FPU_rm)) { + FPU_stack_underflow_i(FPU_rm); + goto FPU_instruction_done; + } + break; + case _REGIp: + if (!NOT_EMPTY_ST0 || !NOT_EMPTY(FPU_rm)) { + FPU_stack_underflow_pop(FPU_rm); + goto FPU_instruction_done; + } + break; + case _REGI_: + if (!NOT_EMPTY_ST0 || !NOT_EMPTY(FPU_rm)) { + FPU_stack_underflow(); + goto FPU_instruction_done; + } + break; + case _PUSH_: /* Only used by the fld st(i) instruction */ + break; + case _null_: + FPU_illegal(); + goto FPU_instruction_done; + default: + EXCEPTION(EX_INTERNAL | 0x111); + goto FPU_instruction_done; + } + (*st_instr_table[(int)instr_index]) (); + + FPU_instruction_done: + ; + } + + if (!no_ip_update) + instruction_address = entry_sel_off; + + FPU_fwait_done: + +#ifdef DEBUG + RE_ENTRANT_CHECK_OFF; + FPU_printall(); + RE_ENTRANT_CHECK_ON; +#endif /* DEBUG */ + + if (FPU_lookahead && !need_resched()) { + FPU_ORIG_EIP = FPU_EIP - code_base; + if (valid_prefix(&byte1, (u_char __user **) & FPU_EIP, + &addr_modes.override)) + goto do_another_FPU_instruction; + } + + if (addr_modes.default_mode) + FPU_EIP -= code_base; + + RE_ENTRANT_CHECK_OFF; +} + +/* Support for prefix bytes is not yet complete. To properly handle + all prefix bytes, further changes are needed in the emulator code + which accesses user address space. Access to separate segments is + important for msdos emulation. */ +static int valid_prefix(u_char *Byte, u_char __user **fpu_eip, + overrides * override) +{ + u_char byte; + u_char __user *ip = *fpu_eip; + + *override = (overrides) { + 0, 0, PREFIX_DEFAULT}; /* defaults */ + + RE_ENTRANT_CHECK_OFF; + FPU_code_access_ok(1); + FPU_get_user(byte, ip); + RE_ENTRANT_CHECK_ON; + + while (1) { + switch (byte) { + case ADDR_SIZE_PREFIX: + override->address_size = ADDR_SIZE_PREFIX; + goto do_next_byte; + + case OP_SIZE_PREFIX: + override->operand_size = OP_SIZE_PREFIX; + goto do_next_byte; + + case PREFIX_CS: + override->segment = PREFIX_CS_; + goto do_next_byte; + case PREFIX_ES: + override->segment = PREFIX_ES_; + goto do_next_byte; + case PREFIX_SS: + override->segment = PREFIX_SS_; + goto do_next_byte; + case PREFIX_FS: + override->segment = PREFIX_FS_; + goto do_next_byte; + case PREFIX_GS: + override->segment = PREFIX_GS_; + goto do_next_byte; + case PREFIX_DS: + override->segment = PREFIX_DS_; + goto do_next_byte; + +/* lock is not a valid prefix for FPU instructions, + let the cpu handle it to generate a SIGILL. */ +/* case PREFIX_LOCK: */ + + /* rep.. prefixes have no meaning for FPU instructions */ + case PREFIX_REPE: + case PREFIX_REPNE: + + do_next_byte: + ip++; + RE_ENTRANT_CHECK_OFF; + FPU_code_access_ok(1); + FPU_get_user(byte, ip); + RE_ENTRANT_CHECK_ON; + break; + case FWAIT_OPCODE: + *Byte = byte; + return 1; + default: + if ((byte & 0xf8) == 0xd8) { + *Byte = byte; + *fpu_eip = ip; + return 1; + } else { + /* Not a valid sequence of prefix bytes followed by + an FPU instruction. */ + *Byte = byte; /* Needed for error message. */ + return 0; + } + } + } +} + +void math_abort(struct math_emu_info *info, unsigned int signal) +{ + FPU_EIP = FPU_ORIG_EIP; + current->thread.trap_nr = X86_TRAP_MF; + current->thread.error_code = 0; + send_sig(signal, current, 1); + RE_ENTRANT_CHECK_OFF; + __asm__("movl %0,%%esp ; ret": :"g"(((long)info) - 4)); +#ifdef PARANOID + printk("ERROR: wm-FPU-emu math_abort failed!\n"); +#endif /* PARANOID */ +} + +#define S387 ((struct swregs_state *)s387) +#define sstatus_word() \ + ((S387->swd & ~SW_Top & 0xffff) | ((S387->ftop << SW_Top_Shift) & SW_Top)) + +int fpregs_soft_set(struct task_struct *target, + const struct user_regset *regset, + unsigned int pos, unsigned int count, + const void *kbuf, const void __user *ubuf) +{ + struct swregs_state *s387 = &target->thread.fpu.fpstate->regs.soft; + void *space = s387->st_space; + int ret; + int offset, other, i, tags, regnr, tag, newtop; + + RE_ENTRANT_CHECK_OFF; + ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, s387, 0, + offsetof(struct swregs_state, st_space)); + RE_ENTRANT_CHECK_ON; + + if (ret) + return ret; + + S387->ftop = (S387->swd >> SW_Top_Shift) & 7; + offset = (S387->ftop & 7) * 10; + other = 80 - offset; + + RE_ENTRANT_CHECK_OFF; + + /* Copy all registers in stack order. */ + ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, + space + offset, 0, other); + if (!ret && offset) + ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, + space, 0, offset); + + RE_ENTRANT_CHECK_ON; + + /* The tags may need to be corrected now. */ + tags = S387->twd; + newtop = S387->ftop; + for (i = 0; i < 8; i++) { + regnr = (i + newtop) & 7; + if (((tags >> ((regnr & 7) * 2)) & 3) != TAG_Empty) { + /* The loaded data over-rides all other cases. */ + tag = + FPU_tagof((FPU_REG *) ((u_char *) S387->st_space + + 10 * regnr)); + tags &= ~(3 << (regnr * 2)); + tags |= (tag & 3) << (regnr * 2); + } + } + S387->twd = tags; + + return ret; +} + +int fpregs_soft_get(struct task_struct *target, + const struct user_regset *regset, + struct membuf to) +{ + struct swregs_state *s387 = &target->thread.fpu.fpstate->regs.soft; + const void *space = s387->st_space; + int offset = (S387->ftop & 7) * 10, other = 80 - offset; + + RE_ENTRANT_CHECK_OFF; + +#ifdef PECULIAR_486 + S387->cwd &= ~0xe080; + /* An 80486 sets nearly all of the reserved bits to 1. */ + S387->cwd |= 0xffff0040; + S387->swd = sstatus_word() | 0xffff0000; + S387->twd |= 0xffff0000; + S387->fcs &= ~0xf8000000; + S387->fos |= 0xffff0000; +#endif /* PECULIAR_486 */ + + membuf_write(&to, s387, offsetof(struct swregs_state, st_space)); + membuf_write(&to, space + offset, other); + membuf_write(&to, space, offset); + + RE_ENTRANT_CHECK_ON; + + return 0; +} |