diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
commit | 2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch) | |
tree | 848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/ata/ahci_xgene.c | |
parent | Initial commit. (diff) | |
download | linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip |
Adding upstream version 6.1.76.upstream/6.1.76upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to '')
-rw-r--r-- | drivers/ata/ahci_xgene.c | 884 |
1 files changed, 884 insertions, 0 deletions
diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c new file mode 100644 index 000000000..1e08704d5 --- /dev/null +++ b/drivers/ata/ahci_xgene.c @@ -0,0 +1,884 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * AppliedMicro X-Gene SoC SATA Host Controller Driver + * + * Copyright (c) 2014, Applied Micro Circuits Corporation + * Author: Loc Ho <lho@apm.com> + * Tuan Phan <tphan@apm.com> + * Suman Tripathi <stripathi@apm.com> + * + * NOTE: PM support is not currently available. + */ +#include <linux/acpi.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/ahci_platform.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/of_irq.h> +#include <linux/phy/phy.h> +#include "ahci.h" + +#define DRV_NAME "xgene-ahci" + +/* Max # of disk per a controller */ +#define MAX_AHCI_CHN_PERCTR 2 + +/* MUX CSR */ +#define SATA_ENET_CONFIG_REG 0x00000000 +#define CFG_SATA_ENET_SELECT_MASK 0x00000001 + +/* SATA core host controller CSR */ +#define SLVRDERRATTRIBUTES 0x00000000 +#define SLVWRERRATTRIBUTES 0x00000004 +#define MSTRDERRATTRIBUTES 0x00000008 +#define MSTWRERRATTRIBUTES 0x0000000c +#define BUSCTLREG 0x00000014 +#define IOFMSTRWAUX 0x00000018 +#define INTSTATUSMASK 0x0000002c +#define ERRINTSTATUS 0x00000030 +#define ERRINTSTATUSMASK 0x00000034 + +/* SATA host AHCI CSR */ +#define PORTCFG 0x000000a4 +#define PORTADDR_SET(dst, src) \ + (((dst) & ~0x0000003f) | (((u32)(src)) & 0x0000003f)) +#define PORTPHY1CFG 0x000000a8 +#define PORTPHY1CFG_FRCPHYRDY_SET(dst, src) \ + (((dst) & ~0x00100000) | (((u32)(src) << 0x14) & 0x00100000)) +#define PORTPHY2CFG 0x000000ac +#define PORTPHY3CFG 0x000000b0 +#define PORTPHY4CFG 0x000000b4 +#define PORTPHY5CFG 0x000000b8 +#define SCTL0 0x0000012C +#define PORTPHY5CFG_RTCHG_SET(dst, src) \ + (((dst) & ~0xfff00000) | (((u32)(src) << 0x14) & 0xfff00000)) +#define PORTAXICFG_EN_CONTEXT_SET(dst, src) \ + (((dst) & ~0x01000000) | (((u32)(src) << 0x18) & 0x01000000)) +#define PORTAXICFG 0x000000bc +#define PORTAXICFG_OUTTRANS_SET(dst, src) \ + (((dst) & ~0x00f00000) | (((u32)(src) << 0x14) & 0x00f00000)) +#define PORTRANSCFG 0x000000c8 +#define PORTRANSCFG_RXWM_SET(dst, src) \ + (((dst) & ~0x0000007f) | (((u32)(src)) & 0x0000007f)) + +/* SATA host controller AXI CSR */ +#define INT_SLV_TMOMASK 0x00000010 + +/* SATA diagnostic CSR */ +#define CFG_MEM_RAM_SHUTDOWN 0x00000070 +#define BLOCK_MEM_RDY 0x00000074 + +/* Max retry for link down */ +#define MAX_LINK_DOWN_RETRY 3 + +enum xgene_ahci_version { + XGENE_AHCI_V1 = 1, + XGENE_AHCI_V2, +}; + +struct xgene_ahci_context { + struct ahci_host_priv *hpriv; + struct device *dev; + u8 last_cmd[MAX_AHCI_CHN_PERCTR]; /* tracking the last command issued*/ + u32 class[MAX_AHCI_CHN_PERCTR]; /* tracking the class of device */ + void __iomem *csr_core; /* Core CSR address of IP */ + void __iomem *csr_diag; /* Diag CSR address of IP */ + void __iomem *csr_axi; /* AXI CSR address of IP */ + void __iomem *csr_mux; /* MUX CSR address of IP */ +}; + +static int xgene_ahci_init_memram(struct xgene_ahci_context *ctx) +{ + dev_dbg(ctx->dev, "Release memory from shutdown\n"); + writel(0x0, ctx->csr_diag + CFG_MEM_RAM_SHUTDOWN); + readl(ctx->csr_diag + CFG_MEM_RAM_SHUTDOWN); /* Force a barrier */ + msleep(1); /* reset may take up to 1ms */ + if (readl(ctx->csr_diag + BLOCK_MEM_RDY) != 0xFFFFFFFF) { + dev_err(ctx->dev, "failed to release memory from shutdown\n"); + return -ENODEV; + } + return 0; +} + +/** + * xgene_ahci_poll_reg_val- Poll a register on a specific value. + * @ap : ATA port of interest. + * @reg : Register of interest. + * @val : Value to be attained. + * @interval : waiting interval for polling. + * @timeout : timeout for achieving the value. + */ +static int xgene_ahci_poll_reg_val(struct ata_port *ap, + void __iomem *reg, unsigned + int val, unsigned long interval, + unsigned long timeout) +{ + unsigned long deadline; + unsigned int tmp; + + tmp = ioread32(reg); + deadline = ata_deadline(jiffies, timeout); + + while (tmp != val && time_before(jiffies, deadline)) { + ata_msleep(ap, interval); + tmp = ioread32(reg); + } + + return tmp; +} + +/** + * xgene_ahci_restart_engine - Restart the dma engine. + * @ap : ATA port of interest + * + * Waits for completion of multiple commands and restarts + * the DMA engine inside the controller. + */ +static int xgene_ahci_restart_engine(struct ata_port *ap) +{ + struct ahci_host_priv *hpriv = ap->host->private_data; + struct ahci_port_priv *pp = ap->private_data; + void __iomem *port_mmio = ahci_port_base(ap); + u32 fbs; + + /* + * In case of PMP multiple IDENTIFY DEVICE commands can be + * issued inside PxCI. So need to poll PxCI for the + * completion of outstanding IDENTIFY DEVICE commands before + * we restart the DMA engine. + */ + if (xgene_ahci_poll_reg_val(ap, port_mmio + + PORT_CMD_ISSUE, 0x0, 1, 100)) + return -EBUSY; + + hpriv->stop_engine(ap); + ahci_start_fis_rx(ap); + + /* + * Enable the PxFBS.FBS_EN bit as it + * gets cleared due to stopping the engine. + */ + if (pp->fbs_supported) { + fbs = readl(port_mmio + PORT_FBS); + writel(fbs | PORT_FBS_EN, port_mmio + PORT_FBS); + fbs = readl(port_mmio + PORT_FBS); + } + + hpriv->start_engine(ap); + + return 0; +} + +/** + * xgene_ahci_qc_issue - Issue commands to the device + * @qc: Command to issue + * + * Due to Hardware errata for IDENTIFY DEVICE command, the controller cannot + * clear the BSY bit after receiving the PIO setup FIS. This results in the dma + * state machine goes into the CMFatalErrorUpdate state and locks up. By + * restarting the dma engine, it removes the controller out of lock up state. + * + * Due to H/W errata, the controller is unable to save the PMP + * field fetched from command header before sending the H2D FIS. + * When the device returns the PMP port field in the D2H FIS, there is + * a mismatch and results in command completion failure. The + * workaround is to write the pmp value to PxFBS.DEV field before issuing + * any command to PMP. + */ +static unsigned int xgene_ahci_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ahci_host_priv *hpriv = ap->host->private_data; + struct xgene_ahci_context *ctx = hpriv->plat_data; + int rc = 0; + u32 port_fbs; + void __iomem *port_mmio = ahci_port_base(ap); + + /* + * Write the pmp value to PxFBS.DEV + * for case of Port Mulitplier. + */ + if (ctx->class[ap->port_no] == ATA_DEV_PMP) { + port_fbs = readl(port_mmio + PORT_FBS); + port_fbs &= ~PORT_FBS_DEV_MASK; + port_fbs |= qc->dev->link->pmp << PORT_FBS_DEV_OFFSET; + writel(port_fbs, port_mmio + PORT_FBS); + } + + if (unlikely((ctx->last_cmd[ap->port_no] == ATA_CMD_ID_ATA) || + (ctx->last_cmd[ap->port_no] == ATA_CMD_PACKET) || + (ctx->last_cmd[ap->port_no] == ATA_CMD_SMART))) + xgene_ahci_restart_engine(ap); + + rc = ahci_qc_issue(qc); + + /* Save the last command issued */ + ctx->last_cmd[ap->port_no] = qc->tf.command; + + return rc; +} + +static bool xgene_ahci_is_memram_inited(struct xgene_ahci_context *ctx) +{ + void __iomem *diagcsr = ctx->csr_diag; + + return (readl(diagcsr + CFG_MEM_RAM_SHUTDOWN) == 0 && + readl(diagcsr + BLOCK_MEM_RDY) == 0xFFFFFFFF); +} + +/** + * xgene_ahci_read_id - Read ID data from the specified device + * @dev: device + * @tf: proposed taskfile + * @id: data buffer + * + * This custom read ID function is required due to the fact that the HW + * does not support DEVSLP. + */ +static unsigned int xgene_ahci_read_id(struct ata_device *dev, + struct ata_taskfile *tf, __le16 *id) +{ + u32 err_mask; + + err_mask = ata_do_dev_read_id(dev, tf, id); + if (err_mask) + return err_mask; + + /* + * Mask reserved area. Word78 spec of Link Power Management + * bit15-8: reserved + * bit7: NCQ autosence + * bit6: Software settings preservation supported + * bit5: reserved + * bit4: In-order sata delivery supported + * bit3: DIPM requests supported + * bit2: DMA Setup FIS Auto-Activate optimization supported + * bit1: DMA Setup FIX non-Zero buffer offsets supported + * bit0: Reserved + * + * Clear reserved bit 8 (DEVSLP bit) as we don't support DEVSLP + */ + id[ATA_ID_FEATURE_SUPP] &= cpu_to_le16(~(1 << 8)); + + return 0; +} + +static void xgene_ahci_set_phy_cfg(struct xgene_ahci_context *ctx, int channel) +{ + void __iomem *mmio = ctx->hpriv->mmio; + u32 val; + + dev_dbg(ctx->dev, "port configure mmio 0x%p channel %d\n", + mmio, channel); + val = readl(mmio + PORTCFG); + val = PORTADDR_SET(val, channel == 0 ? 2 : 3); + writel(val, mmio + PORTCFG); + readl(mmio + PORTCFG); /* Force a barrier */ + /* Disable fix rate */ + writel(0x0001fffe, mmio + PORTPHY1CFG); + readl(mmio + PORTPHY1CFG); /* Force a barrier */ + writel(0x28183219, mmio + PORTPHY2CFG); + readl(mmio + PORTPHY2CFG); /* Force a barrier */ + writel(0x13081008, mmio + PORTPHY3CFG); + readl(mmio + PORTPHY3CFG); /* Force a barrier */ + writel(0x00480815, mmio + PORTPHY4CFG); + readl(mmio + PORTPHY4CFG); /* Force a barrier */ + /* Set window negotiation */ + val = readl(mmio + PORTPHY5CFG); + val = PORTPHY5CFG_RTCHG_SET(val, 0x300); + writel(val, mmio + PORTPHY5CFG); + readl(mmio + PORTPHY5CFG); /* Force a barrier */ + val = readl(mmio + PORTAXICFG); + val = PORTAXICFG_EN_CONTEXT_SET(val, 0x1); /* Enable context mgmt */ + val = PORTAXICFG_OUTTRANS_SET(val, 0xe); /* Set outstanding */ + writel(val, mmio + PORTAXICFG); + readl(mmio + PORTAXICFG); /* Force a barrier */ + /* Set the watermark threshold of the receive FIFO */ + val = readl(mmio + PORTRANSCFG); + val = PORTRANSCFG_RXWM_SET(val, 0x30); + writel(val, mmio + PORTRANSCFG); +} + +/** + * xgene_ahci_do_hardreset - Issue the actual COMRESET + * @link: link to reset + * @deadline: deadline jiffies for the operation + * @online: Return value to indicate if device online + * + * Due to the limitation of the hardware PHY, a difference set of setting is + * required for each supported disk speed - Gen3 (6.0Gbps), Gen2 (3.0Gbps), + * and Gen1 (1.5Gbps). Otherwise during long IO stress test, the PHY will + * report disparity error and etc. In addition, during COMRESET, there can + * be error reported in the register PORT_SCR_ERR. For SERR_DISPARITY and + * SERR_10B_8B_ERR, the PHY receiver line must be reseted. Also during long + * reboot cycle regression, sometimes the PHY reports link down even if the + * device is present because of speed negotiation failure. so need to retry + * the COMRESET to get the link up. The following algorithm is followed to + * proper configure the hardware PHY during COMRESET: + * + * Alg Part 1: + * 1. Start the PHY at Gen3 speed (default setting) + * 2. Issue the COMRESET + * 3. If no link, go to Alg Part 3 + * 4. If link up, determine if the negotiated speed matches the PHY + * configured speed + * 5. If they matched, go to Alg Part 2 + * 6. If they do not matched and first time, configure the PHY for the linked + * up disk speed and repeat step 2 + * 7. Go to Alg Part 2 + * + * Alg Part 2: + * 1. On link up, if there are any SERR_DISPARITY and SERR_10B_8B_ERR error + * reported in the register PORT_SCR_ERR, then reset the PHY receiver line + * 2. Go to Alg Part 4 + * + * Alg Part 3: + * 1. Check the PORT_SCR_STAT to see whether device presence detected but PHY + * communication establishment failed and maximum link down attempts are + * less than Max attempts 3 then goto Alg Part 1. + * 2. Go to Alg Part 4. + * + * Alg Part 4: + * 1. Clear any pending from register PORT_SCR_ERR. + * + * NOTE: For the initial version, we will NOT support Gen1/Gen2. In addition + * and until the underlying PHY supports an method to reset the receiver + * line, on detection of SERR_DISPARITY or SERR_10B_8B_ERR errors, + * an warning message will be printed. + */ +static int xgene_ahci_do_hardreset(struct ata_link *link, + unsigned long deadline, bool *online) +{ + const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); + struct ata_port *ap = link->ap; + struct ahci_host_priv *hpriv = ap->host->private_data; + struct xgene_ahci_context *ctx = hpriv->plat_data; + struct ahci_port_priv *pp = ap->private_data; + u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; + void __iomem *port_mmio = ahci_port_base(ap); + struct ata_taskfile tf; + int link_down_retry = 0; + int rc; + u32 val, sstatus; + + do { + /* clear D2H reception area to properly wait for D2H FIS */ + ata_tf_init(link->device, &tf); + tf.status = ATA_BUSY; + ata_tf_to_fis(&tf, 0, 0, d2h_fis); + rc = sata_link_hardreset(link, timing, deadline, online, + ahci_check_ready); + if (*online) { + val = readl(port_mmio + PORT_SCR_ERR); + if (val & (SERR_DISPARITY | SERR_10B_8B_ERR)) + dev_warn(ctx->dev, "link has error\n"); + break; + } + + sata_scr_read(link, SCR_STATUS, &sstatus); + } while (link_down_retry++ < MAX_LINK_DOWN_RETRY && + (sstatus & 0xff) == 0x1); + + /* clear all errors if any pending */ + val = readl(port_mmio + PORT_SCR_ERR); + writel(val, port_mmio + PORT_SCR_ERR); + + return rc; +} + +static int xgene_ahci_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + struct ata_port *ap = link->ap; + struct ahci_host_priv *hpriv = ap->host->private_data; + void __iomem *port_mmio = ahci_port_base(ap); + bool online; + int rc; + u32 portcmd_saved; + u32 portclb_saved; + u32 portclbhi_saved; + u32 portrxfis_saved; + u32 portrxfishi_saved; + + /* As hardreset resets these CSR, save it to restore later */ + portcmd_saved = readl(port_mmio + PORT_CMD); + portclb_saved = readl(port_mmio + PORT_LST_ADDR); + portclbhi_saved = readl(port_mmio + PORT_LST_ADDR_HI); + portrxfis_saved = readl(port_mmio + PORT_FIS_ADDR); + portrxfishi_saved = readl(port_mmio + PORT_FIS_ADDR_HI); + + hpriv->stop_engine(ap); + + rc = xgene_ahci_do_hardreset(link, deadline, &online); + + /* As controller hardreset clears them, restore them */ + writel(portcmd_saved, port_mmio + PORT_CMD); + writel(portclb_saved, port_mmio + PORT_LST_ADDR); + writel(portclbhi_saved, port_mmio + PORT_LST_ADDR_HI); + writel(portrxfis_saved, port_mmio + PORT_FIS_ADDR); + writel(portrxfishi_saved, port_mmio + PORT_FIS_ADDR_HI); + + hpriv->start_engine(ap); + + if (online) + *class = ahci_dev_classify(ap); + + return rc; +} + +static void xgene_ahci_host_stop(struct ata_host *host) +{ + struct ahci_host_priv *hpriv = host->private_data; + + ahci_platform_disable_resources(hpriv); +} + +/** + * xgene_ahci_pmp_softreset - Issue the softreset to the drives connected + * to Port Multiplier. + * @link: link to reset + * @class: Return value to indicate class of device + * @deadline: deadline jiffies for the operation + * + * Due to H/W errata, the controller is unable to save the PMP + * field fetched from command header before sending the H2D FIS. + * When the device returns the PMP port field in the D2H FIS, there is + * a mismatch and results in command completion failure. The workaround + * is to write the pmp value to PxFBS.DEV field before issuing any command + * to PMP. + */ +static int xgene_ahci_pmp_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + int pmp = sata_srst_pmp(link); + struct ata_port *ap = link->ap; + u32 rc; + void __iomem *port_mmio = ahci_port_base(ap); + u32 port_fbs; + + /* + * Set PxFBS.DEV field with pmp + * value. + */ + port_fbs = readl(port_mmio + PORT_FBS); + port_fbs &= ~PORT_FBS_DEV_MASK; + port_fbs |= pmp << PORT_FBS_DEV_OFFSET; + writel(port_fbs, port_mmio + PORT_FBS); + + rc = ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready); + + return rc; +} + +/** + * xgene_ahci_softreset - Issue the softreset to the drive. + * @link: link to reset + * @class: Return value to indicate class of device + * @deadline: deadline jiffies for the operation + * + * Due to H/W errata, the controller is unable to save the PMP + * field fetched from command header before sending the H2D FIS. + * When the device returns the PMP port field in the D2H FIS, there is + * a mismatch and results in command completion failure. The workaround + * is to write the pmp value to PxFBS.DEV field before issuing any command + * to PMP. Here is the algorithm to detect PMP : + * + * 1. Save the PxFBS value + * 2. Program PxFBS.DEV with pmp value send by framework. Framework sends + * 0xF for both PMP/NON-PMP initially + * 3. Issue softreset + * 4. If signature class is PMP goto 6 + * 5. restore the original PxFBS and goto 3 + * 6. return + */ +static int xgene_ahci_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + int pmp = sata_srst_pmp(link); + struct ata_port *ap = link->ap; + struct ahci_host_priv *hpriv = ap->host->private_data; + struct xgene_ahci_context *ctx = hpriv->plat_data; + void __iomem *port_mmio = ahci_port_base(ap); + u32 port_fbs; + u32 port_fbs_save; + u32 retry = 1; + u32 rc; + + port_fbs_save = readl(port_mmio + PORT_FBS); + + /* + * Set PxFBS.DEV field with pmp + * value. + */ + port_fbs = readl(port_mmio + PORT_FBS); + port_fbs &= ~PORT_FBS_DEV_MASK; + port_fbs |= pmp << PORT_FBS_DEV_OFFSET; + writel(port_fbs, port_mmio + PORT_FBS); + +softreset_retry: + rc = ahci_do_softreset(link, class, pmp, + deadline, ahci_check_ready); + + ctx->class[ap->port_no] = *class; + if (*class != ATA_DEV_PMP) { + /* + * Retry for normal drives without + * setting PxFBS.DEV field with pmp value. + */ + if (retry--) { + writel(port_fbs_save, port_mmio + PORT_FBS); + goto softreset_retry; + } + } + + return rc; +} + +/** + * xgene_ahci_handle_broken_edge_irq - Handle the broken irq. + * @host: Host that recieved the irq + * @irq_masked: HOST_IRQ_STAT value + * + * For hardware with broken edge trigger latch + * the HOST_IRQ_STAT register misses the edge interrupt + * when clearing of HOST_IRQ_STAT register and hardware + * reporting the PORT_IRQ_STAT register at the + * same clock cycle. + * As such, the algorithm below outlines the workaround. + * + * 1. Read HOST_IRQ_STAT register and save the state. + * 2. Clear the HOST_IRQ_STAT register. + * 3. Read back the HOST_IRQ_STAT register. + * 4. If HOST_IRQ_STAT register equals to zero, then + * traverse the rest of port's PORT_IRQ_STAT register + * to check if an interrupt is triggered at that point else + * go to step 6. + * 5. If PORT_IRQ_STAT register of rest ports is not equal to zero + * then update the state of HOST_IRQ_STAT saved in step 1. + * 6. Handle port interrupts. + * 7. Exit + */ +static int xgene_ahci_handle_broken_edge_irq(struct ata_host *host, + u32 irq_masked) +{ + struct ahci_host_priv *hpriv = host->private_data; + void __iomem *port_mmio; + int i; + + if (!readl(hpriv->mmio + HOST_IRQ_STAT)) { + for (i = 0; i < host->n_ports; i++) { + if (irq_masked & (1 << i)) + continue; + + port_mmio = ahci_port_base(host->ports[i]); + if (readl(port_mmio + PORT_IRQ_STAT)) + irq_masked |= (1 << i); + } + } + + return ahci_handle_port_intr(host, irq_masked); +} + +static irqreturn_t xgene_ahci_irq_intr(int irq, void *dev_instance) +{ + struct ata_host *host = dev_instance; + struct ahci_host_priv *hpriv; + unsigned int rc = 0; + void __iomem *mmio; + u32 irq_stat, irq_masked; + + hpriv = host->private_data; + mmio = hpriv->mmio; + + /* sigh. 0xffffffff is a valid return from h/w */ + irq_stat = readl(mmio + HOST_IRQ_STAT); + if (!irq_stat) + return IRQ_NONE; + + irq_masked = irq_stat & hpriv->port_map; + + spin_lock(&host->lock); + + /* + * HOST_IRQ_STAT behaves as edge triggered latch meaning that + * it should be cleared before all the port events are cleared. + */ + writel(irq_stat, mmio + HOST_IRQ_STAT); + + rc = xgene_ahci_handle_broken_edge_irq(host, irq_masked); + + spin_unlock(&host->lock); + + return IRQ_RETVAL(rc); +} + +static struct ata_port_operations xgene_ahci_v1_ops = { + .inherits = &ahci_ops, + .host_stop = xgene_ahci_host_stop, + .hardreset = xgene_ahci_hardreset, + .read_id = xgene_ahci_read_id, + .qc_issue = xgene_ahci_qc_issue, + .softreset = xgene_ahci_softreset, + .pmp_softreset = xgene_ahci_pmp_softreset +}; + +static const struct ata_port_info xgene_ahci_v1_port_info = { + .flags = AHCI_FLAG_COMMON | ATA_FLAG_PMP, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &xgene_ahci_v1_ops, +}; + +static struct ata_port_operations xgene_ahci_v2_ops = { + .inherits = &ahci_ops, + .host_stop = xgene_ahci_host_stop, + .hardreset = xgene_ahci_hardreset, + .read_id = xgene_ahci_read_id, +}; + +static const struct ata_port_info xgene_ahci_v2_port_info = { + .flags = AHCI_FLAG_COMMON | ATA_FLAG_PMP, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &xgene_ahci_v2_ops, +}; + +static int xgene_ahci_hw_init(struct ahci_host_priv *hpriv) +{ + struct xgene_ahci_context *ctx = hpriv->plat_data; + int i; + int rc; + u32 val; + + /* Remove IP RAM out of shutdown */ + rc = xgene_ahci_init_memram(ctx); + if (rc) + return rc; + + for (i = 0; i < MAX_AHCI_CHN_PERCTR; i++) + xgene_ahci_set_phy_cfg(ctx, i); + + /* AXI disable Mask */ + writel(0xffffffff, hpriv->mmio + HOST_IRQ_STAT); + readl(hpriv->mmio + HOST_IRQ_STAT); /* Force a barrier */ + writel(0, ctx->csr_core + INTSTATUSMASK); + val = readl(ctx->csr_core + INTSTATUSMASK); /* Force a barrier */ + dev_dbg(ctx->dev, "top level interrupt mask 0x%X value 0x%08X\n", + INTSTATUSMASK, val); + + writel(0x0, ctx->csr_core + ERRINTSTATUSMASK); + readl(ctx->csr_core + ERRINTSTATUSMASK); /* Force a barrier */ + writel(0x0, ctx->csr_axi + INT_SLV_TMOMASK); + readl(ctx->csr_axi + INT_SLV_TMOMASK); + + /* Enable AXI Interrupt */ + writel(0xffffffff, ctx->csr_core + SLVRDERRATTRIBUTES); + writel(0xffffffff, ctx->csr_core + SLVWRERRATTRIBUTES); + writel(0xffffffff, ctx->csr_core + MSTRDERRATTRIBUTES); + writel(0xffffffff, ctx->csr_core + MSTWRERRATTRIBUTES); + + /* Enable coherency */ + val = readl(ctx->csr_core + BUSCTLREG); + val &= ~0x00000002; /* Enable write coherency */ + val &= ~0x00000001; /* Enable read coherency */ + writel(val, ctx->csr_core + BUSCTLREG); + + val = readl(ctx->csr_core + IOFMSTRWAUX); + val |= (1 << 3); /* Enable read coherency */ + val |= (1 << 9); /* Enable write coherency */ + writel(val, ctx->csr_core + IOFMSTRWAUX); + val = readl(ctx->csr_core + IOFMSTRWAUX); + dev_dbg(ctx->dev, "coherency 0x%X value 0x%08X\n", + IOFMSTRWAUX, val); + + return rc; +} + +static int xgene_ahci_mux_select(struct xgene_ahci_context *ctx) +{ + u32 val; + + /* Check for optional MUX resource */ + if (!ctx->csr_mux) + return 0; + + val = readl(ctx->csr_mux + SATA_ENET_CONFIG_REG); + val &= ~CFG_SATA_ENET_SELECT_MASK; + writel(val, ctx->csr_mux + SATA_ENET_CONFIG_REG); + val = readl(ctx->csr_mux + SATA_ENET_CONFIG_REG); + return val & CFG_SATA_ENET_SELECT_MASK ? -1 : 0; +} + +static struct scsi_host_template ahci_platform_sht = { + AHCI_SHT(DRV_NAME), +}; + +#ifdef CONFIG_ACPI +static const struct acpi_device_id xgene_ahci_acpi_match[] = { + { "APMC0D0D", XGENE_AHCI_V1}, + { "APMC0D32", XGENE_AHCI_V2}, + {}, +}; +MODULE_DEVICE_TABLE(acpi, xgene_ahci_acpi_match); +#endif + +static const struct of_device_id xgene_ahci_of_match[] = { + {.compatible = "apm,xgene-ahci", .data = (void *) XGENE_AHCI_V1}, + {.compatible = "apm,xgene-ahci-v2", .data = (void *) XGENE_AHCI_V2}, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, xgene_ahci_of_match); + +static int xgene_ahci_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct ahci_host_priv *hpriv; + struct xgene_ahci_context *ctx; + struct resource *res; + const struct of_device_id *of_devid; + enum xgene_ahci_version version = XGENE_AHCI_V1; + const struct ata_port_info *ppi[] = { &xgene_ahci_v1_port_info, + &xgene_ahci_v2_port_info }; + int rc; + + hpriv = ahci_platform_get_resources(pdev, 0); + if (IS_ERR(hpriv)) + return PTR_ERR(hpriv); + + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + hpriv->plat_data = ctx; + ctx->hpriv = hpriv; + ctx->dev = dev; + + /* Retrieve the IP core resource */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + ctx->csr_core = devm_ioremap_resource(dev, res); + if (IS_ERR(ctx->csr_core)) + return PTR_ERR(ctx->csr_core); + + /* Retrieve the IP diagnostic resource */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 2); + ctx->csr_diag = devm_ioremap_resource(dev, res); + if (IS_ERR(ctx->csr_diag)) + return PTR_ERR(ctx->csr_diag); + + /* Retrieve the IP AXI resource */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 3); + ctx->csr_axi = devm_ioremap_resource(dev, res); + if (IS_ERR(ctx->csr_axi)) + return PTR_ERR(ctx->csr_axi); + + /* Retrieve the optional IP mux resource */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 4); + if (res) { + void __iomem *csr = devm_ioremap_resource(dev, res); + if (IS_ERR(csr)) + return PTR_ERR(csr); + + ctx->csr_mux = csr; + } + + of_devid = of_match_device(xgene_ahci_of_match, dev); + if (of_devid) { + if (of_devid->data) + version = (unsigned long) of_devid->data; + } +#ifdef CONFIG_ACPI + else { + const struct acpi_device_id *acpi_id; + struct acpi_device_info *info; + acpi_status status; + + acpi_id = acpi_match_device(xgene_ahci_acpi_match, &pdev->dev); + if (!acpi_id) { + dev_warn(&pdev->dev, "No node entry in ACPI table. Assume version1\n"); + version = XGENE_AHCI_V1; + } else if (acpi_id->driver_data) { + version = (enum xgene_ahci_version) acpi_id->driver_data; + status = acpi_get_object_info(ACPI_HANDLE(&pdev->dev), &info); + if (ACPI_FAILURE(status)) { + dev_warn(&pdev->dev, "%s: Error reading device info. Assume version1\n", + __func__); + version = XGENE_AHCI_V1; + } else { + if (info->valid & ACPI_VALID_CID) + version = XGENE_AHCI_V2; + kfree(info); + } + } + } +#endif + + dev_dbg(dev, "VAddr 0x%p Mmio VAddr 0x%p\n", ctx->csr_core, + hpriv->mmio); + + /* Select ATA */ + if ((rc = xgene_ahci_mux_select(ctx))) { + dev_err(dev, "SATA mux selection failed error %d\n", rc); + return -ENODEV; + } + + if (xgene_ahci_is_memram_inited(ctx)) { + dev_info(dev, "skip clock and PHY initialization\n"); + goto skip_clk_phy; + } + + /* Due to errata, HW requires full toggle transition */ + rc = ahci_platform_enable_clks(hpriv); + if (rc) + goto disable_resources; + ahci_platform_disable_clks(hpriv); + + rc = ahci_platform_enable_resources(hpriv); + if (rc) + goto disable_resources; + + /* Configure the host controller */ + xgene_ahci_hw_init(hpriv); +skip_clk_phy: + + switch (version) { + case XGENE_AHCI_V1: + hpriv->flags = AHCI_HFLAG_NO_NCQ; + break; + case XGENE_AHCI_V2: + hpriv->flags |= AHCI_HFLAG_YES_FBS; + hpriv->irq_handler = xgene_ahci_irq_intr; + break; + default: + break; + } + + rc = ahci_platform_init_host(pdev, hpriv, ppi[version - 1], + &ahci_platform_sht); + if (rc) + goto disable_resources; + + dev_dbg(dev, "X-Gene SATA host controller initialized\n"); + return 0; + +disable_resources: + ahci_platform_disable_resources(hpriv); + return rc; +} + +static struct platform_driver xgene_ahci_driver = { + .probe = xgene_ahci_probe, + .remove = ata_platform_remove_one, + .driver = { + .name = DRV_NAME, + .of_match_table = xgene_ahci_of_match, + .acpi_match_table = ACPI_PTR(xgene_ahci_acpi_match), + }, +}; + +module_platform_driver(xgene_ahci_driver); + +MODULE_DESCRIPTION("APM X-Gene AHCI SATA driver"); +MODULE_AUTHOR("Loc Ho <lho@apm.com>"); +MODULE_LICENSE("GPL"); +MODULE_VERSION("0.4"); |