Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 419 insertions, 0 deletions

diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
new file mode 100644
index 000000000..a41145d52
--- /dev/null
+++ b/drivers/block/Kconfig
@@ -0,0 +1,419 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Block device driver configuration
+#
+
+menuconfig BLK_DEV
+	bool "Block devices"
+	depends on BLOCK
+	default y
+	help
+	  Say Y here to get to see options for various different block device
+	  drivers. This option alone does not add any kernel code.
+
+	  If you say N, all options in this submenu will be skipped and disabled;
+	  only do this if you know what you are doing.
+
+if BLK_DEV
+
+source "drivers/block/null_blk/Kconfig"
+
+config BLK_DEV_FD
+	tristate "Normal floppy disk support"
+	depends on ARCH_MAY_HAVE_PC_FDC
+	help
+	  If you want to use the floppy disk drive(s) of your PC under Linux,
+	  say Y. Information about this driver, especially important for IBM
+	  Thinkpad users, is contained in
+	  <file:Documentation/admin-guide/blockdev/floppy.rst>.
+	  That file also contains the location of the Floppy driver FAQ as
+	  well as location of the fdutils package used to configure additional
+	  parameters of the driver at run time.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called floppy.
+
+config BLK_DEV_FD_RAWCMD
+	bool "Support for raw floppy disk commands (DEPRECATED)"
+	depends on BLK_DEV_FD
+	help
+	  If you want to use actual physical floppies and expect to do
+	  special low-level hardware accesses to them (access and use
+	  non-standard formats, for example), then enable this.
+
+	  Note that the code enabled by this option is rarely used and
+	  might be unstable or insecure, and distros should not enable it.
+
+	  Note: FDRAWCMD is deprecated and will be removed from the kernel
+	  in the near future.
+
+	  If unsure, say N.
+
+config AMIGA_FLOPPY
+	tristate "Amiga floppy support"
+	depends on AMIGA
+
+config ATARI_FLOPPY
+	tristate "Atari floppy support"
+	depends on ATARI
+
+config MAC_FLOPPY
+	tristate "Support for PowerMac floppy"
+	depends on PPC_PMAC && !PPC_PMAC64
+	help
+	  If you have a SWIM-3 (Super Woz Integrated Machine 3; from Apple)
+	  floppy controller, say Y here. Most commonly found in PowerMacs.
+
+config BLK_DEV_SWIM
+	tristate "Support for SWIM Macintosh floppy"
+	depends on M68K && MAC && !HIGHMEM
+	help
+	  You should select this option if you want floppy support
+	  and you don't have a II, IIfx, Q900, Q950 or AV series.
+
+config AMIGA_Z2RAM
+	tristate "Amiga Zorro II ramdisk support"
+	depends on ZORRO
+	help
+	  This enables support for using Chip RAM and Zorro II RAM as a
+	  ramdisk or as a swap partition. Say Y if you want to include this
+	  driver in the kernel.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called z2ram.
+
+config N64CART
+	bool "N64 cart support"
+	depends on MACH_NINTENDO64
+	help
+	  Support for the N64 cart.
+
+config CDROM
+	tristate
+
+config GDROM
+	tristate "SEGA Dreamcast GD-ROM drive"
+	depends on SH_DREAMCAST
+	select CDROM
+	help
+	  A standard SEGA Dreamcast comes with a modified CD ROM drive called a
+	  "GD-ROM" by SEGA to signify it is capable of reading special disks
+	  with up to 1 GB of data. This drive will also read standard CD ROM
+	  disks. Select this option to access any disks in your GD ROM drive.
+	  Most users will want to say "Y" here.
+	  You can also build this as a module which will be called gdrom.
+
+config PARIDE
+	tristate "Parallel port IDE device support"
+	depends on PARPORT_PC
+	help
+	  There are many external CD-ROM and disk devices that connect through
+	  your computer's parallel port. Most of them are actually IDE devices
+	  using a parallel port IDE adapter. This option enables the PARIDE
+	  subsystem which contains drivers for many of these external drives.
+	  Read <file:Documentation/admin-guide/blockdev/paride.rst> for more information.
+
+	  If you have said Y to the "Parallel-port support" configuration
+	  option, you may share a single port between your printer and other
+	  parallel port devices. Answer Y to build PARIDE support into your
+	  kernel, or M if you would like to build it as a loadable module. If
+	  your parallel port support is in a loadable module, you must build
+	  PARIDE as a module. If you built PARIDE support into your kernel,
+	  you may still build the individual protocol modules and high-level
+	  drivers as loadable modules. If you build this support as a module,
+	  it will be called paride.
+
+	  To use the PARIDE support, you must say Y or M here and also to at
+	  least one high-level driver (e.g. "Parallel port IDE disks",
+	  "Parallel port ATAPI CD-ROMs", "Parallel port ATAPI disks" etc.) and
+	  to at least one protocol driver (e.g. "ATEN EH-100 protocol",
+	  "MicroSolutions backpack protocol", "DataStor Commuter protocol"
+	  etc.).
+
+source "drivers/block/paride/Kconfig"
+
+source "drivers/block/mtip32xx/Kconfig"
+
+source "drivers/block/zram/Kconfig"
+
+config BLK_DEV_UBD
+	bool "Virtual block device"
+	depends on UML
+	help
+          The User-Mode Linux port includes a driver called UBD which will let
+          you access arbitrary files on the host computer as block devices.
+          Unless you know that you do not need such virtual block devices say
+          Y here.
+
+config BLK_DEV_UBD_SYNC
+	bool "Always do synchronous disk IO for UBD"
+	depends on BLK_DEV_UBD
+	help
+	  Writes to the virtual block device are not immediately written to the
+	  host's disk; this may cause problems if, for example, the User-Mode
+	  Linux 'Virtual Machine' uses a journalling filesystem and the host
+	  computer crashes.
+
+          Synchronous operation (i.e. always writing data to the host's disk
+          immediately) is configurable on a per-UBD basis by using a special
+          kernel command line option.  Alternatively, you can say Y here to
+          turn on synchronous operation by default for all block devices.
+
+          If you're running a journalling file system (like reiserfs, for
+          example) in your virtual machine, you will want to say Y here.  If
+          you care for the safety of the data in your virtual machine, Y is a
+          wise choice too.  In all other cases (for example, if you're just
+          playing around with User-Mode Linux) you can choose N.
+
+config BLK_DEV_COW_COMMON
+	bool
+	default BLK_DEV_UBD
+
+config BLK_DEV_LOOP
+	tristate "Loopback device support"
+	help
+	  Saying Y here will allow you to use a regular file as a block
+	  device; you can then create a file system on that block device and
+	  mount it just as you would mount other block devices such as hard
+	  drive partitions, CD-ROM drives or floppy drives. The loop devices
+	  are block special device files with major number 7 and typically
+	  called /dev/loop0, /dev/loop1 etc.
+
+	  This is useful if you want to check an ISO 9660 file system before
+	  burning the CD, or if you want to use floppy images without first
+	  writing them to floppy. Furthermore, some Linux distributions avoid
+	  the need for a dedicated Linux partition by keeping their complete
+	  root file system inside a DOS FAT file using this loop device
+	  driver.
+
+	  To use the loop device, you need the losetup utility, found in the
+	  util-linux package, see
+	  <https://www.kernel.org/pub/linux/utils/util-linux/>.
+
+	  The loop device driver can also be used to "hide" a file system in
+	  a disk partition, floppy, or regular file, either using encryption
+	  (scrambling the data) or steganography (hiding the data in the low
+	  bits of, say, a sound file). This is also safe if the file resides
+	  on a remote file server.
+
+	  Note that this loop device has nothing to do with the loopback
+	  device used for network connections from the machine to itself.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called loop.
+
+	  Most users will answer N here.
+
+config BLK_DEV_LOOP_MIN_COUNT
+	int "Number of loop devices to pre-create at init time"
+	depends on BLK_DEV_LOOP
+	default 8
+	help
+	  Static number of loop devices to be unconditionally pre-created
+	  at init time.
+
+	  This default value can be overwritten on the kernel command
+	  line or with module-parameter loop.max_loop.
+
+	  The historic default is 8. If a late 2011 version of losetup(8)
+	  is used, it can be set to 0, since needed loop devices can be
+	  dynamically allocated with the /dev/loop-control interface.
+
+source "drivers/block/drbd/Kconfig"
+
+config BLK_DEV_NBD
+	tristate "Network block device support"
+	depends on NET
+	help
+	  Saying Y here will allow your computer to be a client for network
+	  block devices, i.e. it will be able to use block devices exported by
+	  servers (mount file systems on them etc.). Communication between
+	  client and server works over TCP/IP networking, but to the client
+	  program this is hidden: it looks like a regular local file access to
+	  a block device special file such as /dev/nd0.
+
+	  Network block devices also allows you to run a block-device in
+	  userland (making server and client physically the same computer,
+	  communicating using the loopback network device).
+
+	  Read <file:Documentation/admin-guide/blockdev/nbd.rst> for more information,
+	  especially about where to find the server code, which runs in user
+	  space and does not need special kernel support.
+
+	  Note that this has nothing to do with the network file systems NFS
+	  or Coda; you can say N here even if you intend to use NFS or Coda.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called nbd.
+
+	  If unsure, say N.
+
+config BLK_DEV_RAM
+	tristate "RAM block device support"
+	help
+	  Saying Y here will allow you to use a portion of your RAM memory as
+	  a block device, so that you can make file systems on it, read and
+	  write to it and do all the other things that you can do with normal
+	  block devices (such as hard drives). It is usually used to load and
+	  store a copy of a minimal root file system off of a floppy into RAM
+	  during the initial install of Linux.
+
+	  Note that the kernel command line option "ramdisk=XX" is now obsolete.
+	  For details, read <file:Documentation/admin-guide/blockdev/ramdisk.rst>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called brd. An alias "rd" has been defined
+	  for historical reasons.
+
+	  Most normal users won't need the RAM disk functionality, and can
+	  thus say N here.
+
+config BLK_DEV_RAM_COUNT
+	int "Default number of RAM disks"
+	default "16"
+	depends on BLK_DEV_RAM
+	help
+	  The default value is 16 RAM disks. Change this if you know what you
+	  are doing. If you boot from a filesystem that needs to be extracted
+	  in memory, you will need at least one RAM disk (e.g. root on cramfs).
+
+config BLK_DEV_RAM_SIZE
+	int "Default RAM disk size (kbytes)"
+	depends on BLK_DEV_RAM
+	default "4096"
+	help
+	  The default value is 4096 kilobytes. Only change this if you know
+	  what you are doing.
+
+config CDROM_PKTCDVD
+	tristate "Packet writing on CD/DVD media (DEPRECATED)"
+	depends on !UML
+	depends on SCSI
+	select CDROM
+	help
+	  Note: This driver is deprecated and will be removed from the
+	  kernel in the near future!
+
+	  If you have a CDROM/DVD drive that supports packet writing, say
+	  Y to include support. It should work with any MMC/Mt Fuji
+	  compliant ATAPI or SCSI drive, which is just about any newer
+	  DVD/CD writer.
+
+	  Currently only writing to CD-RW, DVD-RW, DVD+RW and DVDRAM discs
+	  is possible.
+	  DVD-RW disks must be in restricted overwrite mode.
+
+	  See the file <file:Documentation/cdrom/packet-writing.rst>
+	  for further information on the use of this driver.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pktcdvd.
+
+config CDROM_PKTCDVD_BUFFERS
+	int "Free buffers for data gathering"
+	depends on CDROM_PKTCDVD
+	default "8"
+	help
+	  This controls the maximum number of active concurrent packets. More
+	  concurrent packets can increase write performance, but also require
+	  more memory. Each concurrent packet will require approximately 64Kb
+	  of non-swappable kernel memory, memory which will be allocated when
+	  a disc is opened for writing.
+
+config CDROM_PKTCDVD_WCACHE
+	bool "Enable write caching"
+	depends on CDROM_PKTCDVD
+	help
+	  If enabled, write caching will be set for the CD-R/W device. For now
+	  this option is dangerous unless the CD-RW media is known good, as we
+	  don't do deferred write error handling yet.
+
+config ATA_OVER_ETH
+	tristate "ATA over Ethernet support"
+	depends on NET
+	help
+	This driver provides Support for ATA over Ethernet block
+	devices like the Coraid EtherDrive (R) Storage Blade.
+
+config SUNVDC
+	tristate "Sun Virtual Disk Client support"
+	depends on SUN_LDOMS
+	help
+	  Support for virtual disk devices as a client under Sun
+	  Logical Domains.
+
+source "drivers/s390/block/Kconfig"
+
+config XEN_BLKDEV_FRONTEND
+	tristate "Xen virtual block device support"
+	depends on XEN
+	default y
+	select XEN_XENBUS_FRONTEND
+	help
+	  This driver implements the front-end of the Xen virtual
+	  block device driver.  It communicates with a back-end driver
+	  in another domain which drives the actual block device.
+
+config XEN_BLKDEV_BACKEND
+	tristate "Xen block-device backend driver"
+	depends on XEN_BACKEND
+	help
+	  The block-device backend driver allows the kernel to export its
+	  block devices to other guests via a high-performance shared-memory
+	  interface.
+
+	  The corresponding Linux frontend driver is enabled by the
+	  CONFIG_XEN_BLKDEV_FRONTEND configuration option.
+
+	  The backend driver attaches itself to a any block device specified
+	  in the XenBus configuration. There are no limits to what the block
+	  device as long as it has a major and minor.
+
+	  If you are compiling a kernel to run in a Xen block backend driver
+	  domain (often this is domain 0) you should say Y here. To
+	  compile this driver as a module, chose M here: the module
+	  will be called xen-blkback.
+
+
+config VIRTIO_BLK
+	tristate "Virtio block driver"
+	depends on VIRTIO
+	select SG_POOL
+	help
+	  This is the virtual block driver for virtio.  It can be used with
+          QEMU based VMMs (like KVM or Xen).  Say Y or M.
+
+config BLK_DEV_RBD
+	tristate "Rados block device (RBD)"
+	depends on INET && BLOCK
+	select CEPH_LIB
+	select LIBCRC32C
+	select CRYPTO_AES
+	select CRYPTO
+	help
+	  Say Y here if you want include the Rados block device, which stripes
+	  a block device over objects stored in the Ceph distributed object
+	  store.
+
+	  More information at http://ceph.newdream.net/.
+
+	  If unsure, say N.
+
+config BLK_DEV_UBLK
+	tristate "Userspace block driver (Experimental)"
+	select IO_URING
+	help
+	  io_uring based userspace block driver. Together with ublk server, ublk
+	  has been working well, but interface with userspace or command data
+	  definition isn't finalized yet, and might change according to future
+	  requirement, so mark is as experimental now.
+
+	  Say Y if you want to get better performance because task_work_add()
+	  can be used in IO path for replacing io_uring cmd, which will become
+	  shared between IO tasks and ubq daemon, meantime task_work_add() can
+	  can handle batch more effectively, but task_work_add() isn't exported
+	  for module, so ublk has to be built to kernel.
+
+source "drivers/block/rnbd/Kconfig"
+
+endif # BLK_DEV