Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 321 insertions, 0 deletions

diff --git a/drivers/block/drbd/drbd_req.h b/drivers/block/drbd/drbd_req.h
new file mode 100644
index 000000000..6237fa1dc
--- /dev/null
+++ b/drivers/block/drbd/drbd_req.h
@@ -0,0 +1,321 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+   drbd_req.h
+
+   This file is part of DRBD by Philipp Reisner and Lars Ellenberg.
+
+   Copyright (C) 2006-2008, LINBIT Information Technologies GmbH.
+   Copyright (C) 2006-2008, Lars Ellenberg <lars.ellenberg@linbit.com>.
+   Copyright (C) 2006-2008, Philipp Reisner <philipp.reisner@linbit.com>.
+
+ */
+
+#ifndef _DRBD_REQ_H
+#define _DRBD_REQ_H
+
+#include <linux/module.h>
+
+#include <linux/slab.h>
+#include <linux/drbd.h>
+#include "drbd_int.h"
+
+/* The request callbacks will be called in irq context by the IDE drivers,
+   and in Softirqs/Tasklets/BH context by the SCSI drivers,
+   and by the receiver and worker in kernel-thread context.
+   Try to get the locking right :) */
+
+/*
+ * Objects of type struct drbd_request do only exist on a R_PRIMARY node, and are
+ * associated with IO requests originating from the block layer above us.
+ *
+ * There are quite a few things that may happen to a drbd request
+ * during its lifetime.
+ *
+ *  It will be created.
+ *  It will be marked with the intention to be
+ *    submitted to local disk and/or
+ *    send via the network.
+ *
+ *  It has to be placed on the transfer log and other housekeeping lists,
+ *  In case we have a network connection.
+ *
+ *  It may be identified as a concurrent (write) request
+ *    and be handled accordingly.
+ *
+ *  It may me handed over to the local disk subsystem.
+ *  It may be completed by the local disk subsystem,
+ *    either successfully or with io-error.
+ *  In case it is a READ request, and it failed locally,
+ *    it may be retried remotely.
+ *
+ *  It may be queued for sending.
+ *  It may be handed over to the network stack,
+ *    which may fail.
+ *  It may be acknowledged by the "peer" according to the wire_protocol in use.
+ *    this may be a negative ack.
+ *  It may receive a faked ack when the network connection is lost and the
+ *  transfer log is cleaned up.
+ *  Sending may be canceled due to network connection loss.
+ *  When it finally has outlived its time,
+ *    corresponding dirty bits in the resync-bitmap may be cleared or set,
+ *    it will be destroyed,
+ *    and completion will be signalled to the originator,
+ *      with or without "success".
+ */
+
+enum drbd_req_event {
+	CREATED,
+	TO_BE_SENT,
+	TO_BE_SUBMITTED,
+
+	/* XXX yes, now I am inconsistent...
+	 * these are not "events" but "actions"
+	 * oh, well... */
+	QUEUE_FOR_NET_WRITE,
+	QUEUE_FOR_NET_READ,
+	QUEUE_FOR_SEND_OOS,
+
+	/* An empty flush is queued as P_BARRIER,
+	 * which will cause it to complete "successfully",
+	 * even if the local disk flush failed.
+	 *
+	 * Just like "real" requests, empty flushes (blkdev_issue_flush()) will
+	 * only see an error if neither local nor remote data is reachable. */
+	QUEUE_AS_DRBD_BARRIER,
+
+	SEND_CANCELED,
+	SEND_FAILED,
+	HANDED_OVER_TO_NETWORK,
+	OOS_HANDED_TO_NETWORK,
+	CONNECTION_LOST_WHILE_PENDING,
+	READ_RETRY_REMOTE_CANCELED,
+	RECV_ACKED_BY_PEER,
+	WRITE_ACKED_BY_PEER,
+	WRITE_ACKED_BY_PEER_AND_SIS, /* and set_in_sync */
+	CONFLICT_RESOLVED,
+	POSTPONE_WRITE,
+	NEG_ACKED,
+	BARRIER_ACKED, /* in protocol A and B */
+	DATA_RECEIVED, /* (remote read) */
+
+	COMPLETED_OK,
+	READ_COMPLETED_WITH_ERROR,
+	READ_AHEAD_COMPLETED_WITH_ERROR,
+	WRITE_COMPLETED_WITH_ERROR,
+	DISCARD_COMPLETED_NOTSUPP,
+	DISCARD_COMPLETED_WITH_ERROR,
+
+	ABORT_DISK_IO,
+	RESEND,
+	FAIL_FROZEN_DISK_IO,
+	RESTART_FROZEN_DISK_IO,
+	NOTHING,
+};
+
+/* encoding of request states for now.  we don't actually need that many bits.
+ * we don't need to do atomic bit operations either, since most of the time we
+ * need to look at the connection state and/or manipulate some lists at the
+ * same time, so we should hold the request lock anyways.
+ */
+enum drbd_req_state_bits {
+	/* 3210
+	 * 0000: no local possible
+	 * 0001: to be submitted
+	 *    UNUSED, we could map: 011: submitted, completion still pending
+	 * 0110: completed ok
+	 * 0010: completed with error
+	 * 1001: Aborted (before completion)
+	 * 1x10: Aborted and completed -> free
+	 */
+	__RQ_LOCAL_PENDING,
+	__RQ_LOCAL_COMPLETED,
+	__RQ_LOCAL_OK,
+	__RQ_LOCAL_ABORTED,
+
+	/* 87654
+	 * 00000: no network possible
+	 * 00001: to be send
+	 * 00011: to be send, on worker queue
+	 * 00101: sent, expecting recv_ack (B) or write_ack (C)
+	 * 11101: sent,
+	 *        recv_ack (B) or implicit "ack" (A),
+	 *        still waiting for the barrier ack.
+	 *        master_bio may already be completed and invalidated.
+	 * 11100: write acked (C),
+	 *        data received (for remote read, any protocol)
+	 *        or finally the barrier ack has arrived (B,A)...
+	 *        request can be freed
+	 * 01100: neg-acked (write, protocol C)
+	 *        or neg-d-acked (read, any protocol)
+	 *        or killed from the transfer log
+	 *        during cleanup after connection loss
+	 *        request can be freed
+	 * 01000: canceled or send failed...
+	 *        request can be freed
+	 */
+
+	/* if "SENT" is not set, yet, this can still fail or be canceled.
+	 * if "SENT" is set already, we still wait for an Ack packet.
+	 * when cleared, the master_bio may be completed.
+	 * in (B,A) the request object may still linger on the transaction log
+	 * until the corresponding barrier ack comes in */
+	__RQ_NET_PENDING,
+
+	/* If it is QUEUED, and it is a WRITE, it is also registered in the
+	 * transfer log. Currently we need this flag to avoid conflicts between
+	 * worker canceling the request and tl_clear_barrier killing it from
+	 * transfer log.  We should restructure the code so this conflict does
+	 * no longer occur. */
+	__RQ_NET_QUEUED,
+
+	/* well, actually only "handed over to the network stack".
+	 *
+	 * TODO can potentially be dropped because of the similar meaning
+	 * of RQ_NET_SENT and ~RQ_NET_QUEUED.
+	 * however it is not exactly the same. before we drop it
+	 * we must ensure that we can tell a request with network part
+	 * from a request without, regardless of what happens to it. */
+	__RQ_NET_SENT,
+
+	/* when set, the request may be freed (if RQ_NET_QUEUED is clear).
+	 * basically this means the corresponding P_BARRIER_ACK was received */
+	__RQ_NET_DONE,
+
+	/* whether or not we know (C) or pretend (B,A) that the write
+	 * was successfully written on the peer.
+	 */
+	__RQ_NET_OK,
+
+	/* peer called drbd_set_in_sync() for this write */
+	__RQ_NET_SIS,
+
+	/* keep this last, its for the RQ_NET_MASK */
+	__RQ_NET_MAX,
+
+	/* Set when this is a write, clear for a read */
+	__RQ_WRITE,
+	__RQ_WSAME,
+	__RQ_UNMAP,
+	__RQ_ZEROES,
+
+	/* Should call drbd_al_complete_io() for this request... */
+	__RQ_IN_ACT_LOG,
+
+	/* This was the most recent request during some blk_finish_plug()
+	 * or its implicit from-schedule equivalent.
+	 * We may use it as hint to send a P_UNPLUG_REMOTE */
+	__RQ_UNPLUG,
+
+	/* The peer has sent a retry ACK */
+	__RQ_POSTPONED,
+
+	/* would have been completed,
+	 * but was not, because of drbd_suspended() */
+	__RQ_COMPLETION_SUSP,
+
+	/* We expect a receive ACK (wire proto B) */
+	__RQ_EXP_RECEIVE_ACK,
+
+	/* We expect a write ACK (wite proto C) */
+	__RQ_EXP_WRITE_ACK,
+
+	/* waiting for a barrier ack, did an extra kref_get */
+	__RQ_EXP_BARR_ACK,
+};
+
+#define RQ_LOCAL_PENDING   (1UL << __RQ_LOCAL_PENDING)
+#define RQ_LOCAL_COMPLETED (1UL << __RQ_LOCAL_COMPLETED)
+#define RQ_LOCAL_OK        (1UL << __RQ_LOCAL_OK)
+#define RQ_LOCAL_ABORTED   (1UL << __RQ_LOCAL_ABORTED)
+
+#define RQ_LOCAL_MASK      ((RQ_LOCAL_ABORTED << 1)-1)
+
+#define RQ_NET_PENDING     (1UL << __RQ_NET_PENDING)
+#define RQ_NET_QUEUED      (1UL << __RQ_NET_QUEUED)
+#define RQ_NET_SENT        (1UL << __RQ_NET_SENT)
+#define RQ_NET_DONE        (1UL << __RQ_NET_DONE)
+#define RQ_NET_OK          (1UL << __RQ_NET_OK)
+#define RQ_NET_SIS         (1UL << __RQ_NET_SIS)
+
+#define RQ_NET_MASK        (((1UL << __RQ_NET_MAX)-1) & ~RQ_LOCAL_MASK)
+
+#define RQ_WRITE           (1UL << __RQ_WRITE)
+#define RQ_WSAME           (1UL << __RQ_WSAME)
+#define RQ_UNMAP           (1UL << __RQ_UNMAP)
+#define RQ_ZEROES          (1UL << __RQ_ZEROES)
+#define RQ_IN_ACT_LOG      (1UL << __RQ_IN_ACT_LOG)
+#define RQ_UNPLUG          (1UL << __RQ_UNPLUG)
+#define RQ_POSTPONED	   (1UL << __RQ_POSTPONED)
+#define RQ_COMPLETION_SUSP (1UL << __RQ_COMPLETION_SUSP)
+#define RQ_EXP_RECEIVE_ACK (1UL << __RQ_EXP_RECEIVE_ACK)
+#define RQ_EXP_WRITE_ACK   (1UL << __RQ_EXP_WRITE_ACK)
+#define RQ_EXP_BARR_ACK    (1UL << __RQ_EXP_BARR_ACK)
+
+/* For waking up the frozen transfer log mod_req() has to return if the request
+   should be counted in the epoch object*/
+#define MR_WRITE       1
+#define MR_READ        2
+
+/* Short lived temporary struct on the stack.
+ * We could squirrel the error to be returned into
+ * bio->bi_iter.bi_size, or similar. But that would be too ugly. */
+struct bio_and_error {
+	struct bio *bio;
+	int error;
+};
+
+extern void start_new_tl_epoch(struct drbd_connection *connection);
+extern void drbd_req_destroy(struct kref *kref);
+extern int __req_mod(struct drbd_request *req, enum drbd_req_event what,
+		struct bio_and_error *m);
+extern void complete_master_bio(struct drbd_device *device,
+		struct bio_and_error *m);
+extern void request_timer_fn(struct timer_list *t);
+extern void tl_restart(struct drbd_connection *connection, enum drbd_req_event what);
+extern void _tl_restart(struct drbd_connection *connection, enum drbd_req_event what);
+extern void tl_abort_disk_io(struct drbd_device *device);
+
+/* this is in drbd_main.c */
+extern void drbd_restart_request(struct drbd_request *req);
+
+/* use this if you don't want to deal with calling complete_master_bio()
+ * outside the spinlock, e.g. when walking some list on cleanup. */
+static inline int _req_mod(struct drbd_request *req, enum drbd_req_event what)
+{
+	struct drbd_device *device = req->device;
+	struct bio_and_error m;
+	int rv;
+
+	/* __req_mod possibly frees req, do not touch req after that! */
+	rv = __req_mod(req, what, &m);
+	if (m.bio)
+		complete_master_bio(device, &m);
+
+	return rv;
+}
+
+/* completion of master bio is outside of our spinlock.
+ * We still may or may not be inside some irqs disabled section
+ * of the lower level driver completion callback, so we need to
+ * spin_lock_irqsave here. */
+static inline int req_mod(struct drbd_request *req,
+		enum drbd_req_event what)
+{
+	unsigned long flags;
+	struct drbd_device *device = req->device;
+	struct bio_and_error m;
+	int rv;
+
+	spin_lock_irqsave(&device->resource->req_lock, flags);
+	rv = __req_mod(req, what, &m);
+	spin_unlock_irqrestore(&device->resource->req_lock, flags);
+
+	if (m.bio)
+		complete_master_bio(device, &m);
+
+	return rv;
+}
+
+extern bool drbd_should_do_remote(union drbd_dev_state);
+
+#endif