diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
commit | 2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch) | |
tree | 848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/clk/qcom/gdsc.c | |
parent | Initial commit. (diff) | |
download | linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip |
Adding upstream version 6.1.76.upstream/6.1.76upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/clk/qcom/gdsc.c')
-rw-r--r-- | drivers/clk/qcom/gdsc.c | 561 |
1 files changed, 561 insertions, 0 deletions
diff --git a/drivers/clk/qcom/gdsc.c b/drivers/clk/qcom/gdsc.c new file mode 100644 index 000000000..0f21a8a76 --- /dev/null +++ b/drivers/clk/qcom/gdsc.c @@ -0,0 +1,561 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2015, 2017-2018, 2022, The Linux Foundation. All rights reserved. + */ + +#include <linux/bitops.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/export.h> +#include <linux/jiffies.h> +#include <linux/kernel.h> +#include <linux/ktime.h> +#include <linux/pm_domain.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/reset-controller.h> +#include <linux/slab.h> +#include "gdsc.h" + +#define PWR_ON_MASK BIT(31) +#define EN_REST_WAIT_MASK GENMASK_ULL(23, 20) +#define EN_FEW_WAIT_MASK GENMASK_ULL(19, 16) +#define CLK_DIS_WAIT_MASK GENMASK_ULL(15, 12) +#define SW_OVERRIDE_MASK BIT(2) +#define HW_CONTROL_MASK BIT(1) +#define SW_COLLAPSE_MASK BIT(0) +#define GMEM_CLAMP_IO_MASK BIT(0) +#define GMEM_RESET_MASK BIT(4) + +/* CFG_GDSCR */ +#define GDSC_POWER_UP_COMPLETE BIT(16) +#define GDSC_POWER_DOWN_COMPLETE BIT(15) +#define GDSC_RETAIN_FF_ENABLE BIT(11) +#define CFG_GDSCR_OFFSET 0x4 + +/* Wait 2^n CXO cycles between all states. Here, n=2 (4 cycles). */ +#define EN_REST_WAIT_VAL 0x2 +#define EN_FEW_WAIT_VAL 0x8 +#define CLK_DIS_WAIT_VAL 0x2 + +/* Transition delay shifts */ +#define EN_REST_WAIT_SHIFT 20 +#define EN_FEW_WAIT_SHIFT 16 +#define CLK_DIS_WAIT_SHIFT 12 + +#define RETAIN_MEM BIT(14) +#define RETAIN_PERIPH BIT(13) + +#define TIMEOUT_US 500 + +#define domain_to_gdsc(domain) container_of(domain, struct gdsc, pd) + +enum gdsc_status { + GDSC_OFF, + GDSC_ON +}; + +/* Returns 1 if GDSC status is status, 0 if not, and < 0 on error */ +static int gdsc_check_status(struct gdsc *sc, enum gdsc_status status) +{ + unsigned int reg; + u32 val; + int ret; + + if (sc->flags & POLL_CFG_GDSCR) + reg = sc->gdscr + CFG_GDSCR_OFFSET; + else if (sc->gds_hw_ctrl) + reg = sc->gds_hw_ctrl; + else + reg = sc->gdscr; + + ret = regmap_read(sc->regmap, reg, &val); + if (ret) + return ret; + + if (sc->flags & POLL_CFG_GDSCR) { + switch (status) { + case GDSC_ON: + return !!(val & GDSC_POWER_UP_COMPLETE); + case GDSC_OFF: + return !!(val & GDSC_POWER_DOWN_COMPLETE); + } + } + + switch (status) { + case GDSC_ON: + return !!(val & PWR_ON_MASK); + case GDSC_OFF: + return !(val & PWR_ON_MASK); + } + + return -EINVAL; +} + +static int gdsc_hwctrl(struct gdsc *sc, bool en) +{ + u32 val = en ? HW_CONTROL_MASK : 0; + + return regmap_update_bits(sc->regmap, sc->gdscr, HW_CONTROL_MASK, val); +} + +static int gdsc_poll_status(struct gdsc *sc, enum gdsc_status status) +{ + ktime_t start; + + start = ktime_get(); + do { + if (gdsc_check_status(sc, status)) + return 0; + } while (ktime_us_delta(ktime_get(), start) < TIMEOUT_US); + + if (gdsc_check_status(sc, status)) + return 0; + + return -ETIMEDOUT; +} + +static int gdsc_update_collapse_bit(struct gdsc *sc, bool val) +{ + u32 reg, mask; + int ret; + + if (sc->collapse_mask) { + reg = sc->collapse_ctrl; + mask = sc->collapse_mask; + } else { + reg = sc->gdscr; + mask = SW_COLLAPSE_MASK; + } + + ret = regmap_update_bits(sc->regmap, reg, mask, val ? mask : 0); + if (ret) + return ret; + + return 0; +} + +static int gdsc_toggle_logic(struct gdsc *sc, enum gdsc_status status) +{ + int ret; + + if (status == GDSC_ON && sc->rsupply) { + ret = regulator_enable(sc->rsupply); + if (ret < 0) + return ret; + } + + ret = gdsc_update_collapse_bit(sc, status == GDSC_OFF); + + /* If disabling votable gdscs, don't poll on status */ + if ((sc->flags & VOTABLE) && status == GDSC_OFF) { + /* + * Add a short delay here to ensure that an enable + * right after it was disabled does not put it in an + * unknown state + */ + udelay(TIMEOUT_US); + return 0; + } + + if (sc->gds_hw_ctrl) { + /* + * The gds hw controller asserts/de-asserts the status bit soon + * after it receives a power on/off request from a master. + * The controller then takes around 8 xo cycles to start its + * internal state machine and update the status bit. During + * this time, the status bit does not reflect the true status + * of the core. + * Add a delay of 1 us between writing to the SW_COLLAPSE bit + * and polling the status bit. + */ + udelay(1); + } + + ret = gdsc_poll_status(sc, status); + WARN(ret, "%s status stuck at 'o%s'", sc->pd.name, status ? "ff" : "n"); + + if (!ret && status == GDSC_OFF && sc->rsupply) { + ret = regulator_disable(sc->rsupply); + if (ret < 0) + return ret; + } + + return ret; +} + +static inline int gdsc_deassert_reset(struct gdsc *sc) +{ + int i; + + for (i = 0; i < sc->reset_count; i++) + sc->rcdev->ops->deassert(sc->rcdev, sc->resets[i]); + return 0; +} + +static inline int gdsc_assert_reset(struct gdsc *sc) +{ + int i; + + for (i = 0; i < sc->reset_count; i++) + sc->rcdev->ops->assert(sc->rcdev, sc->resets[i]); + return 0; +} + +static inline void gdsc_force_mem_on(struct gdsc *sc) +{ + int i; + u32 mask = RETAIN_MEM; + + if (!(sc->flags & NO_RET_PERIPH)) + mask |= RETAIN_PERIPH; + + for (i = 0; i < sc->cxc_count; i++) + regmap_update_bits(sc->regmap, sc->cxcs[i], mask, mask); +} + +static inline void gdsc_clear_mem_on(struct gdsc *sc) +{ + int i; + u32 mask = RETAIN_MEM; + + if (!(sc->flags & NO_RET_PERIPH)) + mask |= RETAIN_PERIPH; + + for (i = 0; i < sc->cxc_count; i++) + regmap_update_bits(sc->regmap, sc->cxcs[i], mask, 0); +} + +static inline void gdsc_deassert_clamp_io(struct gdsc *sc) +{ + regmap_update_bits(sc->regmap, sc->clamp_io_ctrl, + GMEM_CLAMP_IO_MASK, 0); +} + +static inline void gdsc_assert_clamp_io(struct gdsc *sc) +{ + regmap_update_bits(sc->regmap, sc->clamp_io_ctrl, + GMEM_CLAMP_IO_MASK, 1); +} + +static inline void gdsc_assert_reset_aon(struct gdsc *sc) +{ + regmap_update_bits(sc->regmap, sc->clamp_io_ctrl, + GMEM_RESET_MASK, 1); + udelay(1); + regmap_update_bits(sc->regmap, sc->clamp_io_ctrl, + GMEM_RESET_MASK, 0); +} + +static void gdsc_retain_ff_on(struct gdsc *sc) +{ + u32 mask = GDSC_RETAIN_FF_ENABLE; + + regmap_update_bits(sc->regmap, sc->gdscr, mask, mask); +} + +static int gdsc_enable(struct generic_pm_domain *domain) +{ + struct gdsc *sc = domain_to_gdsc(domain); + int ret; + + if (sc->pwrsts == PWRSTS_ON) + return gdsc_deassert_reset(sc); + + if (sc->flags & SW_RESET) { + gdsc_assert_reset(sc); + udelay(1); + gdsc_deassert_reset(sc); + } + + if (sc->flags & CLAMP_IO) { + if (sc->flags & AON_RESET) + gdsc_assert_reset_aon(sc); + gdsc_deassert_clamp_io(sc); + } + + ret = gdsc_toggle_logic(sc, GDSC_ON); + if (ret) + return ret; + + if (sc->pwrsts & PWRSTS_OFF) + gdsc_force_mem_on(sc); + + /* + * If clocks to this power domain were already on, they will take an + * additional 4 clock cycles to re-enable after the power domain is + * enabled. Delay to account for this. A delay is also needed to ensure + * clocks are not enabled within 400ns of enabling power to the + * memories. + */ + udelay(1); + + /* Turn on HW trigger mode if supported */ + if (sc->flags & HW_CTRL) { + ret = gdsc_hwctrl(sc, true); + if (ret) + return ret; + /* + * Wait for the GDSC to go through a power down and + * up cycle. In case a firmware ends up polling status + * bits for the gdsc, it might read an 'on' status before + * the GDSC can finish the power cycle. + * We wait 1us before returning to ensure the firmware + * can't immediately poll the status bits. + */ + udelay(1); + } + + if (sc->flags & RETAIN_FF_ENABLE) + gdsc_retain_ff_on(sc); + + return 0; +} + +static int gdsc_disable(struct generic_pm_domain *domain) +{ + struct gdsc *sc = domain_to_gdsc(domain); + int ret; + + if (sc->pwrsts == PWRSTS_ON) + return gdsc_assert_reset(sc); + + /* Turn off HW trigger mode if supported */ + if (sc->flags & HW_CTRL) { + ret = gdsc_hwctrl(sc, false); + if (ret < 0) + return ret; + /* + * Wait for the GDSC to go through a power down and + * up cycle. In case we end up polling status + * bits for the gdsc before the power cycle is completed + * it might read an 'on' status wrongly. + */ + udelay(1); + + ret = gdsc_poll_status(sc, GDSC_ON); + if (ret) + return ret; + } + + if (sc->pwrsts & PWRSTS_OFF) + gdsc_clear_mem_on(sc); + + /* + * If the GDSC supports only a Retention state, apart from ON, + * leave it in ON state. + * There is no SW control to transition the GDSC into + * Retention state. This happens in HW when the parent + * domain goes down to a Low power state + */ + if (sc->pwrsts == PWRSTS_RET_ON) + return 0; + + ret = gdsc_toggle_logic(sc, GDSC_OFF); + if (ret) + return ret; + + if (sc->flags & CLAMP_IO) + gdsc_assert_clamp_io(sc); + + return 0; +} + +static int gdsc_init(struct gdsc *sc) +{ + u32 mask, val; + int on, ret; + + /* + * Disable HW trigger: collapse/restore occur based on registers writes. + * Disable SW override: Use hardware state-machine for sequencing. + * Configure wait time between states. + */ + mask = HW_CONTROL_MASK | SW_OVERRIDE_MASK | + EN_REST_WAIT_MASK | EN_FEW_WAIT_MASK | CLK_DIS_WAIT_MASK; + + if (!sc->en_rest_wait_val) + sc->en_rest_wait_val = EN_REST_WAIT_VAL; + if (!sc->en_few_wait_val) + sc->en_few_wait_val = EN_FEW_WAIT_VAL; + if (!sc->clk_dis_wait_val) + sc->clk_dis_wait_val = CLK_DIS_WAIT_VAL; + + val = sc->en_rest_wait_val << EN_REST_WAIT_SHIFT | + sc->en_few_wait_val << EN_FEW_WAIT_SHIFT | + sc->clk_dis_wait_val << CLK_DIS_WAIT_SHIFT; + + ret = regmap_update_bits(sc->regmap, sc->gdscr, mask, val); + if (ret) + return ret; + + /* Force gdsc ON if only ON state is supported */ + if (sc->pwrsts == PWRSTS_ON) { + ret = gdsc_toggle_logic(sc, GDSC_ON); + if (ret) + return ret; + } + + on = gdsc_check_status(sc, GDSC_ON); + if (on < 0) + return on; + + if (on) { + /* The regulator must be on, sync the kernel state */ + if (sc->rsupply) { + ret = regulator_enable(sc->rsupply); + if (ret < 0) + return ret; + } + + /* + * Votable GDSCs can be ON due to Vote from other masters. + * If a Votable GDSC is ON, make sure we have a Vote. + */ + if (sc->flags & VOTABLE) { + ret = gdsc_update_collapse_bit(sc, false); + if (ret) + goto err_disable_supply; + } + + /* Turn on HW trigger mode if supported */ + if (sc->flags & HW_CTRL) { + ret = gdsc_hwctrl(sc, true); + if (ret < 0) + goto err_disable_supply; + } + + /* + * Make sure the retain bit is set if the GDSC is already on, + * otherwise we end up turning off the GDSC and destroying all + * the register contents that we thought we were saving. + */ + if (sc->flags & RETAIN_FF_ENABLE) + gdsc_retain_ff_on(sc); + } else if (sc->flags & ALWAYS_ON) { + /* If ALWAYS_ON GDSCs are not ON, turn them ON */ + gdsc_enable(&sc->pd); + on = true; + } + + if (on || (sc->pwrsts & PWRSTS_RET)) + gdsc_force_mem_on(sc); + else + gdsc_clear_mem_on(sc); + + if (sc->flags & ALWAYS_ON) + sc->pd.flags |= GENPD_FLAG_ALWAYS_ON; + if (!sc->pd.power_off) + sc->pd.power_off = gdsc_disable; + if (!sc->pd.power_on) + sc->pd.power_on = gdsc_enable; + + ret = pm_genpd_init(&sc->pd, NULL, !on); + if (ret) + goto err_disable_supply; + + return 0; + +err_disable_supply: + if (on && sc->rsupply) + regulator_disable(sc->rsupply); + + return ret; +} + +int gdsc_register(struct gdsc_desc *desc, + struct reset_controller_dev *rcdev, struct regmap *regmap) +{ + int i, ret; + struct genpd_onecell_data *data; + struct device *dev = desc->dev; + struct gdsc **scs = desc->scs; + size_t num = desc->num; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->domains = devm_kcalloc(dev, num, sizeof(*data->domains), + GFP_KERNEL); + if (!data->domains) + return -ENOMEM; + + for (i = 0; i < num; i++) { + if (!scs[i] || !scs[i]->supply) + continue; + + scs[i]->rsupply = devm_regulator_get(dev, scs[i]->supply); + if (IS_ERR(scs[i]->rsupply)) + return PTR_ERR(scs[i]->rsupply); + } + + data->num_domains = num; + for (i = 0; i < num; i++) { + if (!scs[i]) + continue; + scs[i]->regmap = regmap; + scs[i]->rcdev = rcdev; + ret = gdsc_init(scs[i]); + if (ret) + return ret; + data->domains[i] = &scs[i]->pd; + } + + /* Add subdomains */ + for (i = 0; i < num; i++) { + if (!scs[i]) + continue; + if (scs[i]->parent) + pm_genpd_add_subdomain(scs[i]->parent, &scs[i]->pd); + else if (!IS_ERR_OR_NULL(dev->pm_domain)) + pm_genpd_add_subdomain(pd_to_genpd(dev->pm_domain), &scs[i]->pd); + } + + return of_genpd_add_provider_onecell(dev->of_node, data); +} + +void gdsc_unregister(struct gdsc_desc *desc) +{ + int i; + struct device *dev = desc->dev; + struct gdsc **scs = desc->scs; + size_t num = desc->num; + + /* Remove subdomains */ + for (i = 0; i < num; i++) { + if (!scs[i]) + continue; + if (scs[i]->parent) + pm_genpd_remove_subdomain(scs[i]->parent, &scs[i]->pd); + else if (!IS_ERR_OR_NULL(dev->pm_domain)) + pm_genpd_remove_subdomain(pd_to_genpd(dev->pm_domain), &scs[i]->pd); + } + of_genpd_del_provider(dev->of_node); +} + +/* + * On SDM845+ the GPU GX domain is *almost* entirely controlled by the GMU + * running in the CX domain so the CPU doesn't need to know anything about the + * GX domain EXCEPT.... + * + * Hardware constraints dictate that the GX be powered down before the CX. If + * the GMU crashes it could leave the GX on. In order to successfully bring back + * the device the CPU needs to disable the GX headswitch. There being no sane + * way to reach in and touch that register from deep inside the GPU driver we + * need to set up the infrastructure to be able to ensure that the GPU can + * ensure that the GX is off during this super special case. We do this by + * defining a GX gdsc with a dummy enable function and a "default" disable + * function. + * + * This allows us to attach with genpd_dev_pm_attach_by_name() in the GPU + * driver. During power up, nothing will happen from the CPU (and the GMU will + * power up normally but during power down this will ensure that the GX domain + * is *really* off - this gives us a semi standard way of doing what we need. + */ +int gdsc_gx_do_nothing_enable(struct generic_pm_domain *domain) +{ + /* Do nothing but give genpd the impression that we were successful */ + return 0; +} +EXPORT_SYMBOL_GPL(gdsc_gx_do_nothing_enable); |