Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 158 insertions, 0 deletions

diff --git a/drivers/crypto/caam/caampkc.h b/drivers/crypto/caam/caampkc.h
new file mode 100644
index 000000000..cc889a525
--- /dev/null
+++ b/drivers/crypto/caam/caampkc.h
@@ -0,0 +1,158 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * caam - Freescale FSL CAAM support for Public Key Cryptography descriptors
+ *
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ *
+ * There is no Shared Descriptor for PKC so that the Job Descriptor must carry
+ * all the desired key parameters, input and output pointers.
+ */
+
+#ifndef _PKC_DESC_H_
+#define _PKC_DESC_H_
+#include "compat.h"
+#include "pdb.h"
+#include <crypto/engine.h>
+
+/**
+ * caam_priv_key_form - CAAM RSA private key representation
+ * CAAM RSA private key may have either of three forms.
+ *
+ * 1. The first representation consists of the pair (n, d), where the
+ *    components have the following meanings:
+ *        n      the RSA modulus
+ *        d      the RSA private exponent
+ *
+ * 2. The second representation consists of the triplet (p, q, d), where the
+ *    components have the following meanings:
+ *        p      the first prime factor of the RSA modulus n
+ *        q      the second prime factor of the RSA modulus n
+ *        d      the RSA private exponent
+ *
+ * 3. The third representation consists of the quintuple (p, q, dP, dQ, qInv),
+ *    where the components have the following meanings:
+ *        p      the first prime factor of the RSA modulus n
+ *        q      the second prime factor of the RSA modulus n
+ *        dP     the first factors's CRT exponent
+ *        dQ     the second factors's CRT exponent
+ *        qInv   the (first) CRT coefficient
+ *
+ * The benefit of using the third or the second key form is lower computational
+ * cost for the decryption and signature operations.
+ */
+enum caam_priv_key_form {
+	FORM1,
+	FORM2,
+	FORM3
+};
+
+/**
+ * caam_rsa_key - CAAM RSA key structure. Keys are allocated in DMA zone.
+ * @n           : RSA modulus raw byte stream
+ * @e           : RSA public exponent raw byte stream
+ * @d           : RSA private exponent raw byte stream
+ * @p           : RSA prime factor p of RSA modulus n
+ * @q           : RSA prime factor q of RSA modulus n
+ * @dp          : RSA CRT exponent of p
+ * @dp          : RSA CRT exponent of q
+ * @qinv        : RSA CRT coefficient
+ * @tmp1        : CAAM uses this temporary buffer as internal state buffer.
+ *                It is assumed to be as long as p.
+ * @tmp2        : CAAM uses this temporary buffer as internal state buffer.
+ *                It is assumed to be as long as q.
+ * @n_sz        : length in bytes of RSA modulus n
+ * @e_sz        : length in bytes of RSA public exponent
+ * @d_sz        : length in bytes of RSA private exponent
+ * @p_sz        : length in bytes of RSA prime factor p of RSA modulus n
+ * @q_sz        : length in bytes of RSA prime factor q of RSA modulus n
+ * @priv_form   : CAAM RSA private key representation
+ */
+struct caam_rsa_key {
+	u8 *n;
+	u8 *e;
+	u8 *d;
+	u8 *p;
+	u8 *q;
+	u8 *dp;
+	u8 *dq;
+	u8 *qinv;
+	u8 *tmp1;
+	u8 *tmp2;
+	size_t n_sz;
+	size_t e_sz;
+	size_t d_sz;
+	size_t p_sz;
+	size_t q_sz;
+	enum caam_priv_key_form priv_form;
+};
+
+/**
+ * caam_rsa_ctx - per session context.
+ * @enginectx   : crypto engine context
+ * @key         : RSA key in DMA zone
+ * @dev         : device structure
+ * @padding_dma : dma address of padding, for adding it to the input
+ */
+struct caam_rsa_ctx {
+	struct crypto_engine_ctx enginectx;
+	struct caam_rsa_key key;
+	struct device *dev;
+	dma_addr_t padding_dma;
+
+};
+
+/**
+ * caam_rsa_req_ctx - per request context.
+ * @src           : input scatterlist (stripped of leading zeros)
+ * @fixup_src     : input scatterlist (that might be stripped of leading zeros)
+ * @fixup_src_len : length of the fixup_src input scatterlist
+ * @edesc         : s/w-extended rsa descriptor
+ * @akcipher_op_done : callback used when operation is done
+ */
+struct caam_rsa_req_ctx {
+	struct scatterlist src[2];
+	struct scatterlist *fixup_src;
+	unsigned int fixup_src_len;
+	struct rsa_edesc *edesc;
+	void (*akcipher_op_done)(struct device *jrdev, u32 *desc, u32 err,
+				 void *context);
+};
+
+/**
+ * rsa_edesc - s/w-extended rsa descriptor
+ * @src_nents     : number of segments in input s/w scatterlist
+ * @dst_nents     : number of segments in output s/w scatterlist
+ * @mapped_src_nents: number of segments in input h/w link table
+ * @mapped_dst_nents: number of segments in output h/w link table
+ * @sec4_sg_bytes : length of h/w link table
+ * @bklog         : stored to determine if the request needs backlog
+ * @sec4_sg_dma   : dma address of h/w link table
+ * @sec4_sg       : pointer to h/w link table
+ * @pdb           : specific RSA Protocol Data Block (PDB)
+ * @hw_desc       : descriptor followed by link tables if any
+ */
+struct rsa_edesc {
+	int src_nents;
+	int dst_nents;
+	int mapped_src_nents;
+	int mapped_dst_nents;
+	int sec4_sg_bytes;
+	bool bklog;
+	dma_addr_t sec4_sg_dma;
+	struct sec4_sg_entry *sec4_sg;
+	union {
+		struct rsa_pub_pdb pub;
+		struct rsa_priv_f1_pdb priv_f1;
+		struct rsa_priv_f2_pdb priv_f2;
+		struct rsa_priv_f3_pdb priv_f3;
+	} pdb;
+	u32 hw_desc[];
+};
+
+/* Descriptor construction primitives. */
+void init_rsa_pub_desc(u32 *desc, struct rsa_pub_pdb *pdb);
+void init_rsa_priv_f1_desc(u32 *desc, struct rsa_priv_f1_pdb *pdb);
+void init_rsa_priv_f2_desc(u32 *desc, struct rsa_priv_f2_pdb *pdb);
+void init_rsa_priv_f3_desc(u32 *desc, struct rsa_priv_f3_pdb *pdb);
+
+#endif