diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
commit | 2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch) | |
tree | 848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/crypto/gemini/sl3516-ce.h | |
parent | Initial commit. (diff) | |
download | linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip |
Adding upstream version 6.1.76.upstream/6.1.76upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/crypto/gemini/sl3516-ce.h')
-rw-r--r-- | drivers/crypto/gemini/sl3516-ce.h | 347 |
1 files changed, 347 insertions, 0 deletions
diff --git a/drivers/crypto/gemini/sl3516-ce.h b/drivers/crypto/gemini/sl3516-ce.h new file mode 100644 index 000000000..4c0ec6c92 --- /dev/null +++ b/drivers/crypto/gemini/sl3516-ce.h @@ -0,0 +1,347 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * sl3516-ce.h - hardware cryptographic offloader for cortina/gemini SoC + * + * Copyright (C) 2021 Corentin LABBE <clabbe@baylibre.com> + * + * General notes on this driver: + * Called either Crypto Acceleration Engine Module, Security Acceleration Engine + * or IPSEC module in the datasheet, it will be called Crypto Engine for short + * in this driver. + * The CE was designed to handle IPSEC and wifi(TKIP WEP) protocol. + * It can handle AES, DES, 3DES, MD5, WEP, TKIP, SHA1, HMAC(MD5), HMAC(SHA1), + * Michael cipher/digest suites. + * It acts the same as a network hw, with both RX and TX chained descriptors. + */ +#include <crypto/aes.h> +#include <crypto/engine.h> +#include <crypto/scatterwalk.h> +#include <crypto/skcipher.h> +#include <linux/crypto.h> +#include <linux/debugfs.h> +#include <linux/hw_random.h> + +#define TQ0_TYPE_DATA 0 +#define TQ0_TYPE_CTRL BIT(0) +#define TQ1_CIPHER BIT(1) +#define TQ2_AUTH BIT(2) +#define TQ3_IV BIT(3) +#define TQ4_KEY0 BIT(4) +#define TQ5_KEY4 BIT(5) +#define TQ6_KEY6 BIT(6) +#define TQ7_AKEY0 BIT(7) +#define TQ8_AKEY2 BIT(8) +#define TQ9_AKEY2 BIT(9) + +#define ECB_AES 0x2 + +#define DESC_LAST 0x01 +#define DESC_FIRST 0x02 + +#define IPSEC_ID 0x0000 +#define IPSEC_STATUS_REG 0x00a8 +#define IPSEC_RAND_NUM_REG 0x00ac +#define IPSEC_DMA_DEVICE_ID 0xff00 +#define IPSEC_DMA_STATUS 0xff04 +#define IPSEC_TXDMA_CTRL 0xff08 +#define IPSEC_TXDMA_FIRST_DESC 0xff0c +#define IPSEC_TXDMA_CURR_DESC 0xff10 +#define IPSEC_RXDMA_CTRL 0xff14 +#define IPSEC_RXDMA_FIRST_DESC 0xff18 +#define IPSEC_RXDMA_CURR_DESC 0xff1c +#define IPSEC_TXDMA_BUF_ADDR 0xff28 +#define IPSEC_RXDMA_BUF_ADDR 0xff38 +#define IPSEC_RXDMA_BUF_SIZE 0xff30 + +#define CE_ENCRYPTION 0x01 +#define CE_DECRYPTION 0x03 + +#define MAXDESC 6 + +#define DMA_STATUS_RS_EOFI BIT(22) +#define DMA_STATUS_RS_PERR BIT(24) +#define DMA_STATUS_RS_DERR BIT(25) +#define DMA_STATUS_TS_EOFI BIT(27) +#define DMA_STATUS_TS_PERR BIT(29) +#define DMA_STATUS_TS_DERR BIT(30) + +#define TXDMA_CTRL_START BIT(31) +#define TXDMA_CTRL_CONTINUE BIT(30) +#define TXDMA_CTRL_CHAIN_MODE BIT(29) +/* the burst value is not documented in the datasheet */ +#define TXDMA_CTRL_BURST_UNK BIT(22) +#define TXDMA_CTRL_INT_FAIL BIT(17) +#define TXDMA_CTRL_INT_PERR BIT(16) + +#define RXDMA_CTRL_START BIT(31) +#define RXDMA_CTRL_CONTINUE BIT(30) +#define RXDMA_CTRL_CHAIN_MODE BIT(29) +/* the burst value is not documented in the datasheet */ +#define RXDMA_CTRL_BURST_UNK BIT(22) +#define RXDMA_CTRL_INT_FINISH BIT(18) +#define RXDMA_CTRL_INT_FAIL BIT(17) +#define RXDMA_CTRL_INT_PERR BIT(16) +#define RXDMA_CTRL_INT_EOD BIT(15) +#define RXDMA_CTRL_INT_EOF BIT(14) + +#define CE_CPU 0 +#define CE_DMA 1 + +/* + * struct sl3516_ce_descriptor - descriptor for CE operations + * @frame_ctrl: Information for the current descriptor + * @flag_status: For send packet, describe flag of operations. + * @buf_adr: pointer to a send/recv buffer for data packet + * @next_desc: control linking to other descriptors + */ +struct descriptor { + union { + u32 raw; + /* + * struct desc_frame_ctrl - Information for the current descriptor + * @buffer_size: the size of buffer at buf_adr + * @desc_count: Upon completion of a DMA operation, DMA + * write the number of descriptors used + * for the current frame + * @checksum: unknown + * @authcomp: unknown + * @perr: Protocol error during processing this descriptor + * @derr: Data error during processing this descriptor + * @own: 0 if owned by CPU, 1 for DMA + */ + struct desc_frame_ctrl { + u32 buffer_size :16; + u32 desc_count :6; + u32 checksum :6; + u32 authcomp :1; + u32 perr :1; + u32 derr :1; + u32 own :1; + } bits; + } frame_ctrl; + + union { + u32 raw; + /* + * struct desc_flag_status - flag for this descriptor + * @tqflag: list of flag describing the type of operation + * to be performed. + */ + struct desc_tx_flag_status { + u32 tqflag :10; + u32 unused :22; + } tx_flag; + } flag_status; + + u32 buf_adr; + + union { + u32 next_descriptor; + /* + * struct desc_next - describe chaining of descriptors + * @sof_eof: does the descriptor is first (0x11), + * the last (0x01), middle of a chan (0x00) + * or the only one (0x11) + * @dec: AHB bus address increase (0), decrease (1) + * @eofie: End of frame interrupt enable + * @ndar: Next descriptor address + */ + struct desc_next { + u32 sof_eof :2; + u32 dec :1; + u32 eofie :1; + u32 ndar :28; + } bits; + } next_desc; +}; + +/* + * struct control - The value of this register is used to set the + * operation mode of the IPSec Module. + * @process_id: Used to identify the process. The number will be copied + * to the descriptor status of the received packet. + * @auth_check_len: Number of 32-bit words to be checked or appended by the + * authentication module + * @auth_algorithm: + * @auth_mode: 0:append 1:Check Authentication Result + * @fcs_stream_copy: 0:enable 1:disable authentication stream copy + * @mix_key_sel: 0:use rCipherKey0-3 1:use Key Mixer + * @aesnk: AES Key Size + * @cipher_algorithm: choice of CBC/ECE and AES/DES/3DES + * @op_mode: Operation Mode for the IPSec Module + */ +struct pkt_control_header { + u32 process_id :8; + u32 auth_check_len :3; + u32 un1 :1; + u32 auth_algorithm :3; + u32 auth_mode :1; + u32 fcs_stream_copy :1; + u32 un2 :2; + u32 mix_key_sel :1; + u32 aesnk :4; + u32 cipher_algorithm :3; + u32 un3 :1; + u32 op_mode :4; +}; + +struct pkt_control_cipher { + u32 algorithm_len :16; + u32 header_len :16; +}; + +/* + * struct pkt_control_ecb - control packet for ECB + */ +struct pkt_control_ecb { + struct pkt_control_header control; + struct pkt_control_cipher cipher; + unsigned char key[AES_MAX_KEY_SIZE]; +}; + +/* + * struct sl3516_ce_dev - main container for all this driver information + * @base: base address + * @clks: clocks used + * @reset: pointer to reset controller + * @dev: the platform device + * @engine: ptr to the crypto/crypto_engine + * @complete: completion for the current task on this flow + * @status: set to 1 by interrupt if task is done + * @dtx: base DMA address for TX descriptors + * @tx base address of TX descriptors + * @drx: base DMA address for RX descriptors + * @rx base address of RX descriptors + * @ctx current used TX descriptor + * @crx current used RX descriptor + * @trng hw_random structure for RNG + * @hwrng_stat_req number of HWRNG requests + * @hwrng_stat_bytes total number of bytes generated by RNG + * @stat_irq number of IRQ handled by CE + * @stat_irq_tx number of TX IRQ handled by CE + * @stat_irq_rx number of RX IRQ handled by CE + * @stat_req number of requests handled by CE + * @fallbak_sg_count_tx number of fallback due to destination SG count + * @fallbak_sg_count_rx number of fallback due to source SG count + * @fallbak_not_same_len number of fallback due to difference in SG length + * @dbgfs_dir: Debugfs dentry for statistic directory + * @dbgfs_stats: Debugfs dentry for statistic counters + */ +struct sl3516_ce_dev { + void __iomem *base; + struct clk *clks; + struct reset_control *reset; + struct device *dev; + struct crypto_engine *engine; + struct completion complete; + int status; + dma_addr_t dtx; + struct descriptor *tx; + dma_addr_t drx; + struct descriptor *rx; + int ctx; + int crx; + struct hwrng trng; + unsigned long hwrng_stat_req; + unsigned long hwrng_stat_bytes; + unsigned long stat_irq; + unsigned long stat_irq_tx; + unsigned long stat_irq_rx; + unsigned long stat_req; + unsigned long fallback_sg_count_tx; + unsigned long fallback_sg_count_rx; + unsigned long fallback_not_same_len; + unsigned long fallback_mod16; + unsigned long fallback_align16; +#ifdef CONFIG_CRYPTO_DEV_SL3516_DEBUG + struct dentry *dbgfs_dir; + struct dentry *dbgfs_stats; +#endif + void *pctrl; + dma_addr_t dctrl; +}; + +struct sginfo { + u32 addr; + u32 len; +}; + +/* + * struct sl3516_ce_cipher_req_ctx - context for a skcipher request + * @t_src: list of mapped SGs with their size + * @t_dst: list of mapped SGs with their size + * @op_dir: direction (encrypt vs decrypt) for this request + * @pctrllen: the length of the ctrl packet + * @tqflag: the TQflag to set in data packet + * @h pointer to the pkt_control_cipher header + * @nr_sgs: number of source SG + * @nr_sgd: number of destination SG + * @fallback_req: request struct for invoking the fallback skcipher TFM + */ +struct sl3516_ce_cipher_req_ctx { + struct sginfo t_src[MAXDESC]; + struct sginfo t_dst[MAXDESC]; + u32 op_dir; + unsigned int pctrllen; + u32 tqflag; + struct pkt_control_cipher *h; + int nr_sgs; + int nr_sgd; + struct skcipher_request fallback_req; // keep at the end +}; + +/* + * struct sl3516_ce_cipher_tfm_ctx - context for a skcipher TFM + * @enginectx: crypto_engine used by this TFM + * @key: pointer to key data + * @keylen: len of the key + * @ce: pointer to the private data of driver handling this TFM + * @fallback_tfm: pointer to the fallback TFM + * + * enginectx must be the first element + */ +struct sl3516_ce_cipher_tfm_ctx { + struct crypto_engine_ctx enginectx; + u32 *key; + u32 keylen; + struct sl3516_ce_dev *ce; + struct crypto_skcipher *fallback_tfm; +}; + +/* + * struct sl3516_ce_alg_template - crypto_alg template + * @type: the CRYPTO_ALG_TYPE for this template + * @mode: value to be used in control packet for this algorithm + * @ce: pointer to the sl3516_ce_dev structure associated with + * this template + * @alg: one of sub struct must be used + * @stat_req: number of request done on this template + * @stat_fb: number of request which has fallbacked + * @stat_bytes: total data size done by this template + */ +struct sl3516_ce_alg_template { + u32 type; + u32 mode; + struct sl3516_ce_dev *ce; + union { + struct skcipher_alg skcipher; + } alg; + unsigned long stat_req; + unsigned long stat_fb; + unsigned long stat_bytes; +}; + +int sl3516_ce_enqueue(struct crypto_async_request *areq, u32 type); + +int sl3516_ce_aes_setkey(struct crypto_skcipher *tfm, const u8 *key, + unsigned int keylen); +int sl3516_ce_cipher_init(struct crypto_tfm *tfm); +void sl3516_ce_cipher_exit(struct crypto_tfm *tfm); +int sl3516_ce_skdecrypt(struct skcipher_request *areq); +int sl3516_ce_skencrypt(struct skcipher_request *areq); + +int sl3516_ce_run_task(struct sl3516_ce_dev *ce, + struct sl3516_ce_cipher_req_ctx *rctx, const char *name); + +int sl3516_ce_rng_register(struct sl3516_ce_dev *ce); +void sl3516_ce_rng_unregister(struct sl3516_ce_dev *ce); |