Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 855 insertions, 0 deletions

diff --git a/drivers/extcon/extcon-sm5502.c b/drivers/extcon/extcon-sm5502.c
new file mode 100644
index 000000000..8401e8b27
--- /dev/null
+++ b/drivers/extcon/extcon-sm5502.c
@@ -0,0 +1,855 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * extcon-sm5502.c - Silicon Mitus SM5502 extcon drvier to support USB switches
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd
+ * Author: Chanwoo Choi <cw00.choi@samsung.com>
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/extcon-provider.h>
+
+#include "extcon-sm5502.h"
+
+#define	DELAY_MS_DEFAULT		17000	/* unit: millisecond */
+
+struct muic_irq {
+	unsigned int irq;
+	const char *name;
+	unsigned int virq;
+};
+
+struct reg_data {
+	u8 reg;
+	unsigned int val;
+	bool invert;
+};
+
+struct sm5502_muic_info {
+	struct device *dev;
+	struct extcon_dev *edev;
+
+	struct i2c_client *i2c;
+	struct regmap *regmap;
+
+	const struct sm5502_type *type;
+	struct regmap_irq_chip_data *irq_data;
+	int irq;
+	bool irq_attach;
+	bool irq_detach;
+	struct work_struct irq_work;
+
+	struct mutex mutex;
+
+	/*
+	 * Use delayed workqueue to detect cable state and then
+	 * notify cable state to notifiee/platform through uevent.
+	 * After completing the booting of platform, the extcon provider
+	 * driver should notify cable state to upper layer.
+	 */
+	struct delayed_work wq_detcable;
+};
+
+struct sm5502_type {
+	struct muic_irq *muic_irqs;
+	unsigned int num_muic_irqs;
+	const struct regmap_irq_chip *irq_chip;
+
+	struct reg_data *reg_data;
+	unsigned int num_reg_data;
+
+	unsigned int otg_dev_type1;
+	int (*parse_irq)(struct sm5502_muic_info *info, int irq_type);
+};
+
+/* Default value of SM5502 register to bring up MUIC device. */
+static struct reg_data sm5502_reg_data[] = {
+	{
+		.reg = SM5502_REG_RESET,
+		.val = SM5502_REG_RESET_MASK,
+		.invert = true,
+	}, {
+		.reg = SM5502_REG_CONTROL,
+		.val = SM5502_REG_CONTROL_MASK_INT_MASK,
+		.invert = false,
+	}, {
+		.reg = SM5502_REG_INTMASK1,
+		.val = SM5502_REG_INTM1_KP_MASK
+			| SM5502_REG_INTM1_LKP_MASK
+			| SM5502_REG_INTM1_LKR_MASK,
+		.invert = true,
+	}, {
+		.reg = SM5502_REG_INTMASK2,
+		.val = SM5502_REG_INTM2_VBUS_DET_MASK
+			| SM5502_REG_INTM2_REV_ACCE_MASK
+			| SM5502_REG_INTM2_ADC_CHG_MASK
+			| SM5502_REG_INTM2_STUCK_KEY_MASK
+			| SM5502_REG_INTM2_STUCK_KEY_RCV_MASK
+			| SM5502_REG_INTM2_MHL_MASK,
+		.invert = true,
+	},
+};
+
+/* Default value of SM5504 register to bring up MUIC device. */
+static struct reg_data sm5504_reg_data[] = {
+	{
+		.reg = SM5502_REG_RESET,
+		.val = SM5502_REG_RESET_MASK,
+		.invert = true,
+	}, {
+		.reg = SM5502_REG_INTMASK1,
+		.val = SM5504_REG_INTM1_ATTACH_MASK
+			| SM5504_REG_INTM1_DETACH_MASK,
+		.invert = false,
+	}, {
+		.reg = SM5502_REG_INTMASK2,
+		.val = SM5504_REG_INTM2_RID_CHG_MASK
+			| SM5504_REG_INTM2_UVLO_MASK
+			| SM5504_REG_INTM2_POR_MASK,
+		.invert = true,
+	}, {
+		.reg = SM5502_REG_CONTROL,
+		.val = SM5502_REG_CONTROL_MANUAL_SW_MASK
+			| SM5504_REG_CONTROL_CHGTYP_MASK
+			| SM5504_REG_CONTROL_USBCHDEN_MASK
+			| SM5504_REG_CONTROL_ADC_EN_MASK,
+		.invert = true,
+	},
+};
+
+/* List of detectable cables */
+static const unsigned int sm5502_extcon_cable[] = {
+	EXTCON_USB,
+	EXTCON_USB_HOST,
+	EXTCON_CHG_USB_SDP,
+	EXTCON_CHG_USB_DCP,
+	EXTCON_NONE,
+};
+
+/* Define supported accessory type */
+enum sm5502_muic_acc_type {
+	SM5502_MUIC_ADC_GROUND = 0x0,
+	SM5502_MUIC_ADC_SEND_END_BUTTON,
+	SM5502_MUIC_ADC_REMOTE_S1_BUTTON,
+	SM5502_MUIC_ADC_REMOTE_S2_BUTTON,
+	SM5502_MUIC_ADC_REMOTE_S3_BUTTON,
+	SM5502_MUIC_ADC_REMOTE_S4_BUTTON,
+	SM5502_MUIC_ADC_REMOTE_S5_BUTTON,
+	SM5502_MUIC_ADC_REMOTE_S6_BUTTON,
+	SM5502_MUIC_ADC_REMOTE_S7_BUTTON,
+	SM5502_MUIC_ADC_REMOTE_S8_BUTTON,
+	SM5502_MUIC_ADC_REMOTE_S9_BUTTON,
+	SM5502_MUIC_ADC_REMOTE_S10_BUTTON,
+	SM5502_MUIC_ADC_REMOTE_S11_BUTTON,
+	SM5502_MUIC_ADC_REMOTE_S12_BUTTON,
+	SM5502_MUIC_ADC_RESERVED_ACC_1,
+	SM5502_MUIC_ADC_RESERVED_ACC_2,
+	SM5502_MUIC_ADC_RESERVED_ACC_3,
+	SM5502_MUIC_ADC_RESERVED_ACC_4,
+	SM5502_MUIC_ADC_RESERVED_ACC_5,
+	SM5502_MUIC_ADC_AUDIO_TYPE2,
+	SM5502_MUIC_ADC_PHONE_POWERED_DEV,
+	SM5502_MUIC_ADC_TTY_CONVERTER,
+	SM5502_MUIC_ADC_UART_CABLE,
+	SM5502_MUIC_ADC_TYPE1_CHARGER,
+	SM5502_MUIC_ADC_FACTORY_MODE_BOOT_OFF_USB,
+	SM5502_MUIC_ADC_FACTORY_MODE_BOOT_ON_USB,
+	SM5502_MUIC_ADC_AUDIO_VIDEO_CABLE,
+	SM5502_MUIC_ADC_TYPE2_CHARGER,
+	SM5502_MUIC_ADC_FACTORY_MODE_BOOT_OFF_UART,
+	SM5502_MUIC_ADC_FACTORY_MODE_BOOT_ON_UART,
+	SM5502_MUIC_ADC_AUDIO_TYPE1,
+	SM5502_MUIC_ADC_OPEN = 0x1f,
+
+	/*
+	 * The below accessories have same ADC value (0x1f or 0x1e).
+	 * So, Device type1 is used to separate specific accessory.
+	 */
+							/* |---------|--ADC| */
+							/* |    [7:5]|[4:0]| */
+	SM5502_MUIC_ADC_AUDIO_TYPE1_FULL_REMOTE = 0x3e,	/* |      001|11110| */
+	SM5502_MUIC_ADC_AUDIO_TYPE1_SEND_END = 0x5e,	/* |      010|11110| */
+							/* |Dev Type1|--ADC| */
+	SM5502_MUIC_ADC_GROUND_USB_OTG = 0x80,		/* |      100|00000| */
+	SM5502_MUIC_ADC_OPEN_USB = 0x5f,		/* |      010|11111| */
+	SM5502_MUIC_ADC_OPEN_TA = 0xdf,			/* |      110|11111| */
+	SM5502_MUIC_ADC_OPEN_USB_OTG = 0xff,		/* |      111|11111| */
+};
+
+/* List of supported interrupt for SM5502 */
+static struct muic_irq sm5502_muic_irqs[] = {
+	{ SM5502_IRQ_INT1_ATTACH,	"muic-attach" },
+	{ SM5502_IRQ_INT1_DETACH,	"muic-detach" },
+	{ SM5502_IRQ_INT1_KP,		"muic-kp" },
+	{ SM5502_IRQ_INT1_LKP,		"muic-lkp" },
+	{ SM5502_IRQ_INT1_LKR,		"muic-lkr" },
+	{ SM5502_IRQ_INT1_OVP_EVENT,	"muic-ovp-event" },
+	{ SM5502_IRQ_INT1_OCP_EVENT,	"muic-ocp-event" },
+	{ SM5502_IRQ_INT1_OVP_OCP_DIS,	"muic-ovp-ocp-dis" },
+	{ SM5502_IRQ_INT2_VBUS_DET,	"muic-vbus-det" },
+	{ SM5502_IRQ_INT2_REV_ACCE,	"muic-rev-acce" },
+	{ SM5502_IRQ_INT2_ADC_CHG,	"muic-adc-chg" },
+	{ SM5502_IRQ_INT2_STUCK_KEY,	"muic-stuck-key" },
+	{ SM5502_IRQ_INT2_STUCK_KEY_RCV, "muic-stuck-key-rcv" },
+	{ SM5502_IRQ_INT2_MHL,		"muic-mhl" },
+};
+
+/* Define interrupt list of SM5502 to register regmap_irq */
+static const struct regmap_irq sm5502_irqs[] = {
+	/* INT1 interrupts */
+	{ .reg_offset = 0, .mask = SM5502_IRQ_INT1_ATTACH_MASK, },
+	{ .reg_offset = 0, .mask = SM5502_IRQ_INT1_DETACH_MASK, },
+	{ .reg_offset = 0, .mask = SM5502_IRQ_INT1_KP_MASK, },
+	{ .reg_offset = 0, .mask = SM5502_IRQ_INT1_LKP_MASK, },
+	{ .reg_offset = 0, .mask = SM5502_IRQ_INT1_LKR_MASK, },
+	{ .reg_offset = 0, .mask = SM5502_IRQ_INT1_OVP_EVENT_MASK, },
+	{ .reg_offset = 0, .mask = SM5502_IRQ_INT1_OCP_EVENT_MASK, },
+	{ .reg_offset = 0, .mask = SM5502_IRQ_INT1_OVP_OCP_DIS_MASK, },
+
+	/* INT2 interrupts */
+	{ .reg_offset = 1, .mask = SM5502_IRQ_INT2_VBUS_DET_MASK,},
+	{ .reg_offset = 1, .mask = SM5502_IRQ_INT2_REV_ACCE_MASK, },
+	{ .reg_offset = 1, .mask = SM5502_IRQ_INT2_ADC_CHG_MASK, },
+	{ .reg_offset = 1, .mask = SM5502_IRQ_INT2_STUCK_KEY_MASK, },
+	{ .reg_offset = 1, .mask = SM5502_IRQ_INT2_STUCK_KEY_RCV_MASK, },
+	{ .reg_offset = 1, .mask = SM5502_IRQ_INT2_MHL_MASK, },
+};
+
+static const struct regmap_irq_chip sm5502_muic_irq_chip = {
+	.name			= "sm5502",
+	.status_base		= SM5502_REG_INT1,
+	.mask_base		= SM5502_REG_INTMASK1,
+	.num_regs		= 2,
+	.irqs			= sm5502_irqs,
+	.num_irqs		= ARRAY_SIZE(sm5502_irqs),
+};
+
+/* List of supported interrupt for SM5504 */
+static struct muic_irq sm5504_muic_irqs[] = {
+	{ SM5504_IRQ_INT1_ATTACH,	"muic-attach" },
+	{ SM5504_IRQ_INT1_DETACH,	"muic-detach" },
+	{ SM5504_IRQ_INT1_CHG_DET,	"muic-chg-det" },
+	{ SM5504_IRQ_INT1_DCD_OUT,	"muic-dcd-out" },
+	{ SM5504_IRQ_INT1_OVP_EVENT,	"muic-ovp-event" },
+	{ SM5504_IRQ_INT1_CONNECT,	"muic-connect" },
+	{ SM5504_IRQ_INT1_ADC_CHG,	"muic-adc-chg" },
+	{ SM5504_IRQ_INT2_RID_CHG,	"muic-rid-chg" },
+	{ SM5504_IRQ_INT2_UVLO,		"muic-uvlo" },
+	{ SM5504_IRQ_INT2_POR,		"muic-por" },
+	{ SM5504_IRQ_INT2_OVP_FET,	"muic-ovp-fet" },
+	{ SM5504_IRQ_INT2_OCP_LATCH,	"muic-ocp-latch" },
+	{ SM5504_IRQ_INT2_OCP_EVENT,	"muic-ocp-event" },
+	{ SM5504_IRQ_INT2_OVP_OCP_EVENT, "muic-ovp-ocp-event" },
+};
+
+/* Define interrupt list of SM5504 to register regmap_irq */
+static const struct regmap_irq sm5504_irqs[] = {
+	/* INT1 interrupts */
+	{ .reg_offset = 0, .mask = SM5504_IRQ_INT1_ATTACH_MASK, },
+	{ .reg_offset = 0, .mask = SM5504_IRQ_INT1_DETACH_MASK, },
+	{ .reg_offset = 0, .mask = SM5504_IRQ_INT1_CHG_DET_MASK, },
+	{ .reg_offset = 0, .mask = SM5504_IRQ_INT1_DCD_OUT_MASK, },
+	{ .reg_offset = 0, .mask = SM5504_IRQ_INT1_OVP_MASK, },
+	{ .reg_offset = 0, .mask = SM5504_IRQ_INT1_CONNECT_MASK, },
+	{ .reg_offset = 0, .mask = SM5504_IRQ_INT1_ADC_CHG_MASK, },
+
+	/* INT2 interrupts */
+	{ .reg_offset = 1, .mask = SM5504_IRQ_INT2_RID_CHG_MASK,},
+	{ .reg_offset = 1, .mask = SM5504_IRQ_INT2_UVLO_MASK, },
+	{ .reg_offset = 1, .mask = SM5504_IRQ_INT2_POR_MASK, },
+	{ .reg_offset = 1, .mask = SM5504_IRQ_INT2_OVP_FET_MASK, },
+	{ .reg_offset = 1, .mask = SM5504_IRQ_INT2_OCP_LATCH_MASK, },
+	{ .reg_offset = 1, .mask = SM5504_IRQ_INT2_OCP_EVENT_MASK, },
+	{ .reg_offset = 1, .mask = SM5504_IRQ_INT2_OVP_OCP_EVENT_MASK, },
+};
+
+static const struct regmap_irq_chip sm5504_muic_irq_chip = {
+	.name			= "sm5504",
+	.status_base		= SM5502_REG_INT1,
+	.mask_base		= SM5502_REG_INTMASK1,
+	.num_regs		= 2,
+	.irqs			= sm5504_irqs,
+	.num_irqs		= ARRAY_SIZE(sm5504_irqs),
+};
+
+/* Define regmap configuration of SM5502 for I2C communication  */
+static bool sm5502_muic_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case SM5502_REG_INTMASK1:
+	case SM5502_REG_INTMASK2:
+		return true;
+	default:
+		break;
+	}
+	return false;
+}
+
+static const struct regmap_config sm5502_muic_regmap_config = {
+	.reg_bits	= 8,
+	.val_bits	= 8,
+	.volatile_reg	= sm5502_muic_volatile_reg,
+	.max_register	= SM5502_REG_END,
+};
+
+/* Change DM_CON/DP_CON/VBUSIN switch according to cable type */
+static int sm5502_muic_set_path(struct sm5502_muic_info *info,
+				unsigned int con_sw, unsigned int vbus_sw,
+				bool attached)
+{
+	int ret;
+
+	if (!attached) {
+		con_sw	= DM_DP_SWITCH_OPEN;
+		vbus_sw	= VBUSIN_SWITCH_OPEN;
+	}
+
+	switch (con_sw) {
+	case DM_DP_SWITCH_OPEN:
+	case DM_DP_SWITCH_USB:
+	case DM_DP_SWITCH_AUDIO:
+	case DM_DP_SWITCH_UART:
+		ret = regmap_update_bits(info->regmap, SM5502_REG_MANUAL_SW1,
+					 SM5502_REG_MANUAL_SW1_DP_MASK |
+					 SM5502_REG_MANUAL_SW1_DM_MASK,
+					 con_sw);
+		if (ret < 0) {
+			dev_err(info->dev,
+				"cannot update DM_CON/DP_CON switch\n");
+			return ret;
+		}
+		break;
+	default:
+		dev_err(info->dev, "Unknown DM_CON/DP_CON switch type (%d)\n",
+				con_sw);
+		return -EINVAL;
+	}
+
+	switch (vbus_sw) {
+	case VBUSIN_SWITCH_OPEN:
+	case VBUSIN_SWITCH_VBUSOUT:
+	case VBUSIN_SWITCH_MIC:
+	case VBUSIN_SWITCH_VBUSOUT_WITH_USB:
+		ret = regmap_update_bits(info->regmap, SM5502_REG_MANUAL_SW1,
+					 SM5502_REG_MANUAL_SW1_VBUSIN_MASK,
+					 vbus_sw);
+		if (ret < 0) {
+			dev_err(info->dev,
+				"cannot update VBUSIN switch\n");
+			return ret;
+		}
+		break;
+	default:
+		dev_err(info->dev, "Unknown VBUS switch type (%d)\n", vbus_sw);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* Return cable type of attached or detached accessories */
+static unsigned int sm5502_muic_get_cable_type(struct sm5502_muic_info *info)
+{
+	unsigned int cable_type, adc, dev_type1;
+	int ret;
+
+	/* Read ADC value according to external cable or button */
+	ret = regmap_read(info->regmap, SM5502_REG_ADC, &adc);
+	if (ret) {
+		dev_err(info->dev, "failed to read ADC register\n");
+		return ret;
+	}
+
+	/*
+	 * If ADC is SM5502_MUIC_ADC_GROUND(0x0), external cable hasn't
+	 * connected with to MUIC device.
+	 */
+	cable_type = adc & SM5502_REG_ADC_MASK;
+
+	switch (cable_type) {
+	case SM5502_MUIC_ADC_GROUND:
+		ret = regmap_read(info->regmap, SM5502_REG_DEV_TYPE1,
+				  &dev_type1);
+		if (ret) {
+			dev_err(info->dev, "failed to read DEV_TYPE1 reg\n");
+			return ret;
+		}
+
+		if (dev_type1 == info->type->otg_dev_type1) {
+			cable_type = SM5502_MUIC_ADC_GROUND_USB_OTG;
+		} else {
+			dev_dbg(info->dev,
+				"cannot identify the cable type: adc(0x%x), dev_type1(0x%x)\n",
+				adc, dev_type1);
+			return -EINVAL;
+		}
+		break;
+	case SM5502_MUIC_ADC_SEND_END_BUTTON:
+	case SM5502_MUIC_ADC_REMOTE_S1_BUTTON:
+	case SM5502_MUIC_ADC_REMOTE_S2_BUTTON:
+	case SM5502_MUIC_ADC_REMOTE_S3_BUTTON:
+	case SM5502_MUIC_ADC_REMOTE_S4_BUTTON:
+	case SM5502_MUIC_ADC_REMOTE_S5_BUTTON:
+	case SM5502_MUIC_ADC_REMOTE_S6_BUTTON:
+	case SM5502_MUIC_ADC_REMOTE_S7_BUTTON:
+	case SM5502_MUIC_ADC_REMOTE_S8_BUTTON:
+	case SM5502_MUIC_ADC_REMOTE_S9_BUTTON:
+	case SM5502_MUIC_ADC_REMOTE_S10_BUTTON:
+	case SM5502_MUIC_ADC_REMOTE_S11_BUTTON:
+	case SM5502_MUIC_ADC_REMOTE_S12_BUTTON:
+	case SM5502_MUIC_ADC_RESERVED_ACC_1:
+	case SM5502_MUIC_ADC_RESERVED_ACC_2:
+	case SM5502_MUIC_ADC_RESERVED_ACC_3:
+	case SM5502_MUIC_ADC_RESERVED_ACC_4:
+	case SM5502_MUIC_ADC_RESERVED_ACC_5:
+	case SM5502_MUIC_ADC_AUDIO_TYPE2:
+	case SM5502_MUIC_ADC_PHONE_POWERED_DEV:
+	case SM5502_MUIC_ADC_TTY_CONVERTER:
+	case SM5502_MUIC_ADC_UART_CABLE:
+	case SM5502_MUIC_ADC_TYPE1_CHARGER:
+	case SM5502_MUIC_ADC_FACTORY_MODE_BOOT_OFF_USB:
+	case SM5502_MUIC_ADC_FACTORY_MODE_BOOT_ON_USB:
+	case SM5502_MUIC_ADC_AUDIO_VIDEO_CABLE:
+	case SM5502_MUIC_ADC_TYPE2_CHARGER:
+	case SM5502_MUIC_ADC_FACTORY_MODE_BOOT_OFF_UART:
+	case SM5502_MUIC_ADC_FACTORY_MODE_BOOT_ON_UART:
+		break;
+	case SM5502_MUIC_ADC_AUDIO_TYPE1:
+		/*
+		 * Check whether cable type is
+		 * SM5502_MUIC_ADC_AUDIO_TYPE1_FULL_REMOTE
+		 * or SM5502_MUIC_ADC_AUDIO_TYPE1_SEND_END
+		 * by using Button event.
+		 */
+		break;
+	case SM5502_MUIC_ADC_OPEN:
+		ret = regmap_read(info->regmap, SM5502_REG_DEV_TYPE1,
+				  &dev_type1);
+		if (ret) {
+			dev_err(info->dev, "failed to read DEV_TYPE1 reg\n");
+			return ret;
+		}
+
+		if (dev_type1 == info->type->otg_dev_type1) {
+			cable_type = SM5502_MUIC_ADC_OPEN_USB_OTG;
+			break;
+		}
+
+		switch (dev_type1) {
+		case SM5502_REG_DEV_TYPE1_USB_SDP_MASK:
+			cable_type = SM5502_MUIC_ADC_OPEN_USB;
+			break;
+		case SM5502_REG_DEV_TYPE1_DEDICATED_CHG_MASK:
+			cable_type = SM5502_MUIC_ADC_OPEN_TA;
+			break;
+		default:
+			dev_dbg(info->dev,
+				"cannot identify the cable type: adc(0x%x)\n",
+				adc);
+			return -EINVAL;
+		}
+		break;
+	default:
+		dev_err(info->dev,
+			"failed to identify the cable type: adc(0x%x)\n", adc);
+		return -EINVAL;
+	}
+
+	return cable_type;
+}
+
+static int sm5502_muic_cable_handler(struct sm5502_muic_info *info,
+				     bool attached)
+{
+	static unsigned int prev_cable_type = SM5502_MUIC_ADC_GROUND;
+	unsigned int cable_type = SM5502_MUIC_ADC_GROUND;
+	unsigned int con_sw = DM_DP_SWITCH_OPEN;
+	unsigned int vbus_sw = VBUSIN_SWITCH_OPEN;
+	unsigned int id;
+	int ret;
+
+	/* Get the type of attached or detached cable */
+	if (attached)
+		cable_type = sm5502_muic_get_cable_type(info);
+	else
+		cable_type = prev_cable_type;
+	prev_cable_type = cable_type;
+
+	switch (cable_type) {
+	case SM5502_MUIC_ADC_OPEN_USB:
+		id	= EXTCON_USB;
+		con_sw	= DM_DP_SWITCH_USB;
+		vbus_sw	= VBUSIN_SWITCH_VBUSOUT_WITH_USB;
+		break;
+	case SM5502_MUIC_ADC_OPEN_TA:
+		id	= EXTCON_CHG_USB_DCP;
+		con_sw	= DM_DP_SWITCH_OPEN;
+		vbus_sw	= VBUSIN_SWITCH_VBUSOUT;
+		break;
+	case SM5502_MUIC_ADC_GROUND_USB_OTG:
+	case SM5502_MUIC_ADC_OPEN_USB_OTG:
+		id	= EXTCON_USB_HOST;
+		con_sw	= DM_DP_SWITCH_USB;
+		vbus_sw	= VBUSIN_SWITCH_OPEN;
+		break;
+	default:
+		dev_dbg(info->dev,
+			"cannot handle this cable_type (0x%x)\n", cable_type);
+		return 0;
+	}
+
+	/* Change internal hardware path(DM_CON/DP_CON, VBUSIN) */
+	ret = sm5502_muic_set_path(info, con_sw, vbus_sw, attached);
+	if (ret < 0)
+		return ret;
+
+	/* Change the state of external accessory */
+	extcon_set_state_sync(info->edev, id, attached);
+	if (id == EXTCON_USB)
+		extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP,
+					attached);
+
+	return 0;
+}
+
+static void sm5502_muic_irq_work(struct work_struct *work)
+{
+	struct sm5502_muic_info *info = container_of(work,
+			struct sm5502_muic_info, irq_work);
+	int ret = 0;
+
+	if (!info->edev)
+		return;
+
+	mutex_lock(&info->mutex);
+
+	/* Detect attached or detached cables */
+	if (info->irq_attach) {
+		ret = sm5502_muic_cable_handler(info, true);
+		info->irq_attach = false;
+	}
+	if (info->irq_detach) {
+		ret = sm5502_muic_cable_handler(info, false);
+		info->irq_detach = false;
+	}
+
+	if (ret < 0)
+		dev_err(info->dev, "failed to handle MUIC interrupt\n");
+
+	mutex_unlock(&info->mutex);
+}
+
+/*
+ * Sets irq_attach or irq_detach in sm5502_muic_info and returns 0.
+ * Returns -ESRCH if irq_type does not match registered IRQ for this dev type.
+ */
+static int sm5502_parse_irq(struct sm5502_muic_info *info, int irq_type)
+{
+	switch (irq_type) {
+	case SM5502_IRQ_INT1_ATTACH:
+		info->irq_attach = true;
+		break;
+	case SM5502_IRQ_INT1_DETACH:
+		info->irq_detach = true;
+		break;
+	case SM5502_IRQ_INT1_KP:
+	case SM5502_IRQ_INT1_LKP:
+	case SM5502_IRQ_INT1_LKR:
+	case SM5502_IRQ_INT1_OVP_EVENT:
+	case SM5502_IRQ_INT1_OCP_EVENT:
+	case SM5502_IRQ_INT1_OVP_OCP_DIS:
+	case SM5502_IRQ_INT2_VBUS_DET:
+	case SM5502_IRQ_INT2_REV_ACCE:
+	case SM5502_IRQ_INT2_ADC_CHG:
+	case SM5502_IRQ_INT2_STUCK_KEY:
+	case SM5502_IRQ_INT2_STUCK_KEY_RCV:
+	case SM5502_IRQ_INT2_MHL:
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static int sm5504_parse_irq(struct sm5502_muic_info *info, int irq_type)
+{
+	switch (irq_type) {
+	case SM5504_IRQ_INT1_ATTACH:
+		info->irq_attach = true;
+		break;
+	case SM5504_IRQ_INT1_DETACH:
+		info->irq_detach = true;
+		break;
+	case SM5504_IRQ_INT1_CHG_DET:
+	case SM5504_IRQ_INT1_DCD_OUT:
+	case SM5504_IRQ_INT1_OVP_EVENT:
+	case SM5504_IRQ_INT1_CONNECT:
+	case SM5504_IRQ_INT1_ADC_CHG:
+	case SM5504_IRQ_INT2_RID_CHG:
+	case SM5504_IRQ_INT2_UVLO:
+	case SM5504_IRQ_INT2_POR:
+	case SM5504_IRQ_INT2_OVP_FET:
+	case SM5504_IRQ_INT2_OCP_LATCH:
+	case SM5504_IRQ_INT2_OCP_EVENT:
+	case SM5504_IRQ_INT2_OVP_OCP_EVENT:
+	default:
+		break;
+	}
+
+	return 0;
+}
+
+static irqreturn_t sm5502_muic_irq_handler(int irq, void *data)
+{
+	struct sm5502_muic_info *info = data;
+	int i, irq_type = -1, ret;
+
+	for (i = 0; i < info->type->num_muic_irqs; i++)
+		if (irq == info->type->muic_irqs[i].virq)
+			irq_type = info->type->muic_irqs[i].irq;
+
+	ret = info->type->parse_irq(info, irq_type);
+	if (ret < 0) {
+		dev_warn(info->dev, "cannot handle is interrupt:%d\n",
+				    irq_type);
+		return IRQ_HANDLED;
+	}
+	schedule_work(&info->irq_work);
+
+	return IRQ_HANDLED;
+}
+
+static void sm5502_muic_detect_cable_wq(struct work_struct *work)
+{
+	struct sm5502_muic_info *info = container_of(to_delayed_work(work),
+				struct sm5502_muic_info, wq_detcable);
+	int ret;
+
+	/* Notify the state of connector cable or not  */
+	ret = sm5502_muic_cable_handler(info, true);
+	if (ret < 0)
+		dev_warn(info->dev, "failed to detect cable state\n");
+}
+
+static void sm5502_init_dev_type(struct sm5502_muic_info *info)
+{
+	unsigned int reg_data, vendor_id, version_id;
+	int i, ret;
+
+	/* To test I2C, Print version_id and vendor_id of SM5502 */
+	ret = regmap_read(info->regmap, SM5502_REG_DEVICE_ID, &reg_data);
+	if (ret) {
+		dev_err(info->dev,
+			"failed to read DEVICE_ID register: %d\n", ret);
+		return;
+	}
+
+	vendor_id = ((reg_data & SM5502_REG_DEVICE_ID_VENDOR_MASK) >>
+				SM5502_REG_DEVICE_ID_VENDOR_SHIFT);
+	version_id = ((reg_data & SM5502_REG_DEVICE_ID_VERSION_MASK) >>
+				SM5502_REG_DEVICE_ID_VERSION_SHIFT);
+
+	dev_info(info->dev, "Device type: version: 0x%x, vendor: 0x%x\n",
+			    version_id, vendor_id);
+
+	/* Initiazle the register of SM5502 device to bring-up */
+	for (i = 0; i < info->type->num_reg_data; i++) {
+		unsigned int val = 0;
+
+		if (!info->type->reg_data[i].invert)
+			val |= ~info->type->reg_data[i].val;
+		else
+			val = info->type->reg_data[i].val;
+		regmap_write(info->regmap, info->type->reg_data[i].reg, val);
+	}
+}
+
+static int sm5022_muic_i2c_probe(struct i2c_client *i2c)
+{
+	struct device_node *np = i2c->dev.of_node;
+	struct sm5502_muic_info *info;
+	int i, ret, irq_flags;
+
+	if (!np)
+		return -EINVAL;
+
+	info = devm_kzalloc(&i2c->dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+	i2c_set_clientdata(i2c, info);
+
+	info->dev = &i2c->dev;
+	info->i2c = i2c;
+	info->irq = i2c->irq;
+	info->type = device_get_match_data(info->dev);
+	if (!info->type)
+		return -EINVAL;
+	if (!info->type->parse_irq) {
+		dev_err(info->dev, "parse_irq missing in struct sm5502_type\n");
+		return -EINVAL;
+	}
+
+	mutex_init(&info->mutex);
+
+	INIT_WORK(&info->irq_work, sm5502_muic_irq_work);
+
+	info->regmap = devm_regmap_init_i2c(i2c, &sm5502_muic_regmap_config);
+	if (IS_ERR(info->regmap)) {
+		ret = PTR_ERR(info->regmap);
+		dev_err(info->dev, "failed to allocate register map: %d\n",
+				   ret);
+		return ret;
+	}
+
+	/* Support irq domain for SM5502 MUIC device */
+	irq_flags = IRQF_TRIGGER_FALLING | IRQF_ONESHOT | IRQF_SHARED;
+	ret = devm_regmap_add_irq_chip(info->dev, info->regmap, info->irq,
+				       irq_flags, 0, info->type->irq_chip,
+				       &info->irq_data);
+	if (ret != 0) {
+		dev_err(info->dev, "failed to request IRQ %d: %d\n",
+				    info->irq, ret);
+		return ret;
+	}
+
+	for (i = 0; i < info->type->num_muic_irqs; i++) {
+		struct muic_irq *muic_irq = &info->type->muic_irqs[i];
+		int virq = 0;
+
+		virq = regmap_irq_get_virq(info->irq_data, muic_irq->irq);
+		if (virq <= 0)
+			return -EINVAL;
+		muic_irq->virq = virq;
+
+		ret = devm_request_threaded_irq(info->dev, virq, NULL,
+						sm5502_muic_irq_handler,
+						IRQF_NO_SUSPEND | IRQF_ONESHOT,
+						muic_irq->name, info);
+		if (ret) {
+			dev_err(info->dev,
+				"failed: irq request (IRQ: %d, error :%d)\n",
+				muic_irq->irq, ret);
+			return ret;
+		}
+	}
+
+	/* Allocate extcon device */
+	info->edev = devm_extcon_dev_allocate(info->dev, sm5502_extcon_cable);
+	if (IS_ERR(info->edev)) {
+		dev_err(info->dev, "failed to allocate memory for extcon\n");
+		return -ENOMEM;
+	}
+
+	/* Register extcon device */
+	ret = devm_extcon_dev_register(info->dev, info->edev);
+	if (ret) {
+		dev_err(info->dev, "failed to register extcon device\n");
+		return ret;
+	}
+
+	/*
+	 * Detect accessory after completing the initialization of platform
+	 *
+	 * - Use delayed workqueue to detect cable state and then
+	 * notify cable state to notifiee/platform through uevent.
+	 * After completing the booting of platform, the extcon provider
+	 * driver should notify cable state to upper layer.
+	 */
+	INIT_DELAYED_WORK(&info->wq_detcable, sm5502_muic_detect_cable_wq);
+	queue_delayed_work(system_power_efficient_wq, &info->wq_detcable,
+			msecs_to_jiffies(DELAY_MS_DEFAULT));
+
+	/* Initialize SM5502 device and print vendor id and version id */
+	sm5502_init_dev_type(info);
+
+	return 0;
+}
+
+static const struct sm5502_type sm5502_data = {
+	.muic_irqs = sm5502_muic_irqs,
+	.num_muic_irqs = ARRAY_SIZE(sm5502_muic_irqs),
+	.irq_chip = &sm5502_muic_irq_chip,
+	.reg_data = sm5502_reg_data,
+	.num_reg_data = ARRAY_SIZE(sm5502_reg_data),
+	.otg_dev_type1 = SM5502_REG_DEV_TYPE1_USB_OTG_MASK,
+	.parse_irq = sm5502_parse_irq,
+};
+
+static const struct sm5502_type sm5504_data = {
+	.muic_irqs = sm5504_muic_irqs,
+	.num_muic_irqs = ARRAY_SIZE(sm5504_muic_irqs),
+	.irq_chip = &sm5504_muic_irq_chip,
+	.reg_data = sm5504_reg_data,
+	.num_reg_data = ARRAY_SIZE(sm5504_reg_data),
+	.otg_dev_type1 = SM5504_REG_DEV_TYPE1_USB_OTG_MASK,
+	.parse_irq = sm5504_parse_irq,
+};
+
+static const struct of_device_id sm5502_dt_match[] = {
+	{ .compatible = "siliconmitus,sm5502-muic", .data = &sm5502_data },
+	{ .compatible = "siliconmitus,sm5504-muic", .data = &sm5504_data },
+	{ .compatible = "siliconmitus,sm5703-muic", .data = &sm5502_data },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, sm5502_dt_match);
+
+#ifdef CONFIG_PM_SLEEP
+static int sm5502_muic_suspend(struct device *dev)
+{
+	struct i2c_client *i2c = to_i2c_client(dev);
+	struct sm5502_muic_info *info = i2c_get_clientdata(i2c);
+
+	enable_irq_wake(info->irq);
+
+	return 0;
+}
+
+static int sm5502_muic_resume(struct device *dev)
+{
+	struct i2c_client *i2c = to_i2c_client(dev);
+	struct sm5502_muic_info *info = i2c_get_clientdata(i2c);
+
+	disable_irq_wake(info->irq);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(sm5502_muic_pm_ops,
+			 sm5502_muic_suspend, sm5502_muic_resume);
+
+static const struct i2c_device_id sm5502_i2c_id[] = {
+	{ "sm5502", (kernel_ulong_t)&sm5502_data },
+	{ "sm5504", (kernel_ulong_t)&sm5504_data },
+	{ "sm5703-muic", (kernel_ulong_t)&sm5502_data },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, sm5502_i2c_id);
+
+static struct i2c_driver sm5502_muic_i2c_driver = {
+	.driver		= {
+		.name	= "sm5502",
+		.pm	= &sm5502_muic_pm_ops,
+		.of_match_table = sm5502_dt_match,
+	},
+	.probe_new = sm5022_muic_i2c_probe,
+	.id_table = sm5502_i2c_id,
+};
+
+static int __init sm5502_muic_i2c_init(void)
+{
+	return i2c_add_driver(&sm5502_muic_i2c_driver);
+}
+subsys_initcall(sm5502_muic_i2c_init);
+
+MODULE_DESCRIPTION("Silicon Mitus SM5502 Extcon driver");
+MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>");
+MODULE_LICENSE("GPL");