Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 497 insertions, 0 deletions

diff --git a/drivers/gpio/gpio-max3191x.c b/drivers/gpio/gpio-max3191x.c
new file mode 100644
index 000000000..161c4751c
--- /dev/null
+++ b/drivers/gpio/gpio-max3191x.c
@@ -0,0 +1,497 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * gpio-max3191x.c - GPIO driver for Maxim MAX3191x industrial serializer
+ *
+ * Copyright (C) 2017 KUNBUS GmbH
+ *
+ * The MAX3191x makes 8 digital 24V inputs available via SPI.
+ * Multiple chips can be daisy-chained, the spec does not impose
+ * a limit on the number of chips and neither does this driver.
+ *
+ * Either of two modes is selectable: In 8-bit mode, only the state
+ * of the inputs is clocked out to achieve high readout speeds;
+ * In 16-bit mode, an additional status byte is clocked out with
+ * a CRC and indicator bits for undervoltage and overtemperature.
+ * The driver returns an error instead of potentially bogus data
+ * if any of these fault conditions occur.  However it does allow
+ * readout of non-faulting chips in the same daisy-chain.
+ *
+ * MAX3191x supports four debounce settings and the driver is
+ * capable of configuring these differently for each chip in the
+ * daisy-chain.
+ *
+ * If the chips are hardwired to 8-bit mode ("modesel" pulled high),
+ * gpio-pisosr.c can be used alternatively to this driver.
+ *
+ * https://datasheets.maximintegrated.com/en/ds/MAX31910.pdf
+ * https://datasheets.maximintegrated.com/en/ds/MAX31911.pdf
+ * https://datasheets.maximintegrated.com/en/ds/MAX31912.pdf
+ * https://datasheets.maximintegrated.com/en/ds/MAX31913.pdf
+ * https://datasheets.maximintegrated.com/en/ds/MAX31953-MAX31963.pdf
+ */
+
+#include <linux/bitmap.h>
+#include <linux/bitops.h>
+#include <linux/crc8.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/driver.h>
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+
+enum max3191x_mode {
+	STATUS_BYTE_ENABLED,
+	STATUS_BYTE_DISABLED,
+};
+
+/**
+ * struct max3191x_chip - max3191x daisy-chain
+ * @gpio: GPIO controller struct
+ * @lock: protects read sequences
+ * @nchips: number of chips in the daisy-chain
+ * @mode: current mode, 0 for 16-bit, 1 for 8-bit;
+ *	for simplicity, all chips in the daisy-chain are assumed
+ *	to use the same mode
+ * @modesel_pins: GPIO pins to configure modesel of each chip
+ * @fault_pins: GPIO pins to detect fault of each chip
+ * @db0_pins: GPIO pins to configure debounce of each chip
+ * @db1_pins: GPIO pins to configure debounce of each chip
+ * @mesg: SPI message to perform a readout
+ * @xfer: SPI transfer used by @mesg
+ * @crc_error: bitmap signaling CRC error for each chip
+ * @overtemp: bitmap signaling overtemperature alarm for each chip
+ * @undervolt1: bitmap signaling undervoltage alarm for each chip
+ * @undervolt2: bitmap signaling undervoltage warning for each chip
+ * @fault: bitmap signaling assertion of @fault_pins for each chip
+ * @ignore_uv: whether to ignore undervoltage alarms;
+ *	set by a device property if the chips are powered through
+ *	5VOUT instead of VCC24V, in which case they will constantly
+ *	signal undervoltage;
+ *	for simplicity, all chips in the daisy-chain are assumed
+ *	to be powered the same way
+ */
+struct max3191x_chip {
+	struct gpio_chip gpio;
+	struct mutex lock;
+	u32 nchips;
+	enum max3191x_mode mode;
+	struct gpio_descs *modesel_pins;
+	struct gpio_descs *fault_pins;
+	struct gpio_descs *db0_pins;
+	struct gpio_descs *db1_pins;
+	struct spi_message mesg;
+	struct spi_transfer xfer;
+	unsigned long *crc_error;
+	unsigned long *overtemp;
+	unsigned long *undervolt1;
+	unsigned long *undervolt2;
+	unsigned long *fault;
+	bool ignore_uv;
+};
+
+#define MAX3191X_NGPIO 8
+#define MAX3191X_CRC8_POLYNOMIAL 0xa8 /* (x^5) + x^4 + x^2 + x^0 */
+
+DECLARE_CRC8_TABLE(max3191x_crc8);
+
+static int max3191x_get_direction(struct gpio_chip *gpio, unsigned int offset)
+{
+	return GPIO_LINE_DIRECTION_IN; /* always in */
+}
+
+static int max3191x_direction_input(struct gpio_chip *gpio, unsigned int offset)
+{
+	return 0;
+}
+
+static int max3191x_direction_output(struct gpio_chip *gpio,
+				     unsigned int offset, int value)
+{
+	return -EINVAL;
+}
+
+static void max3191x_set(struct gpio_chip *gpio, unsigned int offset, int value)
+{ }
+
+static void max3191x_set_multiple(struct gpio_chip *gpio, unsigned long *mask,
+				  unsigned long *bits)
+{ }
+
+static unsigned int max3191x_wordlen(struct max3191x_chip *max3191x)
+{
+	return max3191x->mode == STATUS_BYTE_ENABLED ? 2 : 1;
+}
+
+static int max3191x_readout_locked(struct max3191x_chip *max3191x)
+{
+	struct device *dev = max3191x->gpio.parent;
+	struct spi_device *spi = to_spi_device(dev);
+	int val, i, ot = 0, uv1 = 0;
+
+	val = spi_sync(spi, &max3191x->mesg);
+	if (val) {
+		dev_err_ratelimited(dev, "SPI receive error %d\n", val);
+		return val;
+	}
+
+	for (i = 0; i < max3191x->nchips; i++) {
+		if (max3191x->mode == STATUS_BYTE_ENABLED) {
+			u8 in	  = ((u8 *)max3191x->xfer.rx_buf)[i * 2];
+			u8 status = ((u8 *)max3191x->xfer.rx_buf)[i * 2 + 1];
+
+			val = (status & 0xf8) != crc8(max3191x_crc8, &in, 1, 0);
+			__assign_bit(i, max3191x->crc_error, val);
+			if (val)
+				dev_err_ratelimited(dev,
+					"chip %d: CRC error\n", i);
+
+			ot  = (status >> 1) & 1;
+			__assign_bit(i, max3191x->overtemp, ot);
+			if (ot)
+				dev_err_ratelimited(dev,
+					"chip %d: overtemperature\n", i);
+
+			if (!max3191x->ignore_uv) {
+				uv1 = !((status >> 2) & 1);
+				__assign_bit(i, max3191x->undervolt1, uv1);
+				if (uv1)
+					dev_err_ratelimited(dev,
+						"chip %d: undervoltage\n", i);
+
+				val = !(status & 1);
+				__assign_bit(i, max3191x->undervolt2, val);
+				if (val && !uv1)
+					dev_warn_ratelimited(dev,
+						"chip %d: voltage warn\n", i);
+			}
+		}
+
+		if (max3191x->fault_pins && !max3191x->ignore_uv) {
+			/* fault pin shared by all chips or per chip */
+			struct gpio_desc *fault_pin =
+				(max3191x->fault_pins->ndescs == 1)
+					? max3191x->fault_pins->desc[0]
+					: max3191x->fault_pins->desc[i];
+
+			val = gpiod_get_value_cansleep(fault_pin);
+			if (val < 0) {
+				dev_err_ratelimited(dev,
+					"GPIO read error %d\n", val);
+				return val;
+			}
+			__assign_bit(i, max3191x->fault, val);
+			if (val && !uv1 && !ot)
+				dev_err_ratelimited(dev,
+					"chip %d: fault\n", i);
+		}
+	}
+
+	return 0;
+}
+
+static bool max3191x_chip_is_faulting(struct max3191x_chip *max3191x,
+				      unsigned int chipnum)
+{
+	/* without status byte the only diagnostic is the fault pin */
+	if (!max3191x->ignore_uv && test_bit(chipnum, max3191x->fault))
+		return true;
+
+	if (max3191x->mode == STATUS_BYTE_DISABLED)
+		return false;
+
+	return test_bit(chipnum, max3191x->crc_error) ||
+	       test_bit(chipnum, max3191x->overtemp)  ||
+	       (!max3191x->ignore_uv &&
+		test_bit(chipnum, max3191x->undervolt1));
+}
+
+static int max3191x_get(struct gpio_chip *gpio, unsigned int offset)
+{
+	struct max3191x_chip *max3191x = gpiochip_get_data(gpio);
+	int ret, chipnum, wordlen = max3191x_wordlen(max3191x);
+	u8 in;
+
+	mutex_lock(&max3191x->lock);
+	ret = max3191x_readout_locked(max3191x);
+	if (ret)
+		goto out_unlock;
+
+	chipnum = offset / MAX3191X_NGPIO;
+	if (max3191x_chip_is_faulting(max3191x, chipnum)) {
+		ret = -EIO;
+		goto out_unlock;
+	}
+
+	in = ((u8 *)max3191x->xfer.rx_buf)[chipnum * wordlen];
+	ret = (in >> (offset % MAX3191X_NGPIO)) & 1;
+
+out_unlock:
+	mutex_unlock(&max3191x->lock);
+	return ret;
+}
+
+static int max3191x_get_multiple(struct gpio_chip *gpio, unsigned long *mask,
+				 unsigned long *bits)
+{
+	struct max3191x_chip *max3191x = gpiochip_get_data(gpio);
+	const unsigned int wordlen = max3191x_wordlen(max3191x);
+	int ret;
+	unsigned long bit;
+	unsigned long gpio_mask;
+	unsigned long in;
+
+	mutex_lock(&max3191x->lock);
+	ret = max3191x_readout_locked(max3191x);
+	if (ret)
+		goto out_unlock;
+
+	bitmap_zero(bits, gpio->ngpio);
+	for_each_set_clump8(bit, gpio_mask, mask, gpio->ngpio) {
+		unsigned int chipnum = bit / MAX3191X_NGPIO;
+
+		if (max3191x_chip_is_faulting(max3191x, chipnum)) {
+			ret = -EIO;
+			goto out_unlock;
+		}
+
+		in = ((u8 *)max3191x->xfer.rx_buf)[chipnum * wordlen];
+		in &= gpio_mask;
+		bitmap_set_value8(bits, in, bit);
+	}
+
+out_unlock:
+	mutex_unlock(&max3191x->lock);
+	return ret;
+}
+
+static int max3191x_set_config(struct gpio_chip *gpio, unsigned int offset,
+			       unsigned long config)
+{
+	struct max3191x_chip *max3191x = gpiochip_get_data(gpio);
+	u32 debounce, chipnum, db0_val, db1_val;
+
+	if (pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE)
+		return -ENOTSUPP;
+
+	if (!max3191x->db0_pins || !max3191x->db1_pins)
+		return -EINVAL;
+
+	debounce = pinconf_to_config_argument(config);
+	switch (debounce) {
+	case 0:
+		db0_val = 0;
+		db1_val = 0;
+		break;
+	case 1 ... 25:
+		db0_val = 0;
+		db1_val = 1;
+		break;
+	case 26 ... 750:
+		db0_val = 1;
+		db1_val = 0;
+		break;
+	case 751 ... 3000:
+		db0_val = 1;
+		db1_val = 1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (max3191x->db0_pins->ndescs == 1)
+		chipnum = 0; /* all chips use the same pair of debounce pins */
+	else
+		chipnum = offset / MAX3191X_NGPIO; /* per chip debounce pins */
+
+	mutex_lock(&max3191x->lock);
+	gpiod_set_value_cansleep(max3191x->db0_pins->desc[chipnum], db0_val);
+	gpiod_set_value_cansleep(max3191x->db1_pins->desc[chipnum], db1_val);
+	mutex_unlock(&max3191x->lock);
+	return 0;
+}
+
+static void gpiod_set_array_single_value_cansleep(unsigned int ndescs,
+						  struct gpio_desc **desc,
+						  struct gpio_array *info,
+						  int value)
+{
+	unsigned long *values;
+
+	values = bitmap_alloc(ndescs, GFP_KERNEL);
+	if (!values)
+		return;
+
+	if (value)
+		bitmap_fill(values, ndescs);
+	else
+		bitmap_zero(values, ndescs);
+
+	gpiod_set_array_value_cansleep(ndescs, desc, info, values);
+	bitmap_free(values);
+}
+
+static struct gpio_descs *devm_gpiod_get_array_optional_count(
+				struct device *dev, const char *con_id,
+				enum gpiod_flags flags, unsigned int expected)
+{
+	struct gpio_descs *descs;
+	int found = gpiod_count(dev, con_id);
+
+	if (found == -ENOENT)
+		return NULL;
+
+	if (found != expected && found != 1) {
+		dev_err(dev, "ignoring %s-gpios: found %d, expected %u or 1\n",
+			con_id, found, expected);
+		return NULL;
+	}
+
+	descs = devm_gpiod_get_array_optional(dev, con_id, flags);
+
+	if (IS_ERR(descs)) {
+		dev_err(dev, "failed to get %s-gpios: %ld\n",
+			con_id, PTR_ERR(descs));
+		return NULL;
+	}
+
+	return descs;
+}
+
+static int max3191x_probe(struct spi_device *spi)
+{
+	struct device *dev = &spi->dev;
+	struct max3191x_chip *max3191x;
+	int n, ret;
+
+	max3191x = devm_kzalloc(dev, sizeof(*max3191x), GFP_KERNEL);
+	if (!max3191x)
+		return -ENOMEM;
+	spi_set_drvdata(spi, max3191x);
+
+	max3191x->nchips = 1;
+	device_property_read_u32(dev, "#daisy-chained-devices",
+				 &max3191x->nchips);
+
+	n = BITS_TO_LONGS(max3191x->nchips);
+	max3191x->crc_error   = devm_kcalloc(dev, n, sizeof(long), GFP_KERNEL);
+	max3191x->undervolt1  = devm_kcalloc(dev, n, sizeof(long), GFP_KERNEL);
+	max3191x->undervolt2  = devm_kcalloc(dev, n, sizeof(long), GFP_KERNEL);
+	max3191x->overtemp    = devm_kcalloc(dev, n, sizeof(long), GFP_KERNEL);
+	max3191x->fault       = devm_kcalloc(dev, n, sizeof(long), GFP_KERNEL);
+	max3191x->xfer.rx_buf = devm_kcalloc(dev, max3191x->nchips,
+								2, GFP_KERNEL);
+	if (!max3191x->crc_error || !max3191x->undervolt1 ||
+	    !max3191x->overtemp  || !max3191x->undervolt2 ||
+	    !max3191x->fault     || !max3191x->xfer.rx_buf)
+		return -ENOMEM;
+
+	max3191x->modesel_pins = devm_gpiod_get_array_optional_count(dev,
+				 "maxim,modesel", GPIOD_ASIS, max3191x->nchips);
+	max3191x->fault_pins   = devm_gpiod_get_array_optional_count(dev,
+				 "maxim,fault", GPIOD_IN, max3191x->nchips);
+	max3191x->db0_pins     = devm_gpiod_get_array_optional_count(dev,
+				 "maxim,db0", GPIOD_OUT_LOW, max3191x->nchips);
+	max3191x->db1_pins     = devm_gpiod_get_array_optional_count(dev,
+				 "maxim,db1", GPIOD_OUT_LOW, max3191x->nchips);
+
+	max3191x->mode = device_property_read_bool(dev, "maxim,modesel-8bit")
+				 ? STATUS_BYTE_DISABLED : STATUS_BYTE_ENABLED;
+	if (max3191x->modesel_pins)
+		gpiod_set_array_single_value_cansleep(
+				 max3191x->modesel_pins->ndescs,
+				 max3191x->modesel_pins->desc,
+				 max3191x->modesel_pins->info, max3191x->mode);
+
+	max3191x->ignore_uv = device_property_read_bool(dev,
+						  "maxim,ignore-undervoltage");
+
+	if (max3191x->db0_pins && max3191x->db1_pins &&
+	    max3191x->db0_pins->ndescs != max3191x->db1_pins->ndescs) {
+		dev_err(dev, "ignoring maxim,db*-gpios: array len mismatch\n");
+		devm_gpiod_put_array(dev, max3191x->db0_pins);
+		devm_gpiod_put_array(dev, max3191x->db1_pins);
+		max3191x->db0_pins = NULL;
+		max3191x->db1_pins = NULL;
+	}
+
+	max3191x->xfer.len = max3191x->nchips * max3191x_wordlen(max3191x);
+	spi_message_init_with_transfers(&max3191x->mesg, &max3191x->xfer, 1);
+
+	max3191x->gpio.label = spi->modalias;
+	max3191x->gpio.owner = THIS_MODULE;
+	max3191x->gpio.parent = dev;
+	max3191x->gpio.base = -1;
+	max3191x->gpio.ngpio = max3191x->nchips * MAX3191X_NGPIO;
+	max3191x->gpio.can_sleep = true;
+
+	max3191x->gpio.get_direction = max3191x_get_direction;
+	max3191x->gpio.direction_input = max3191x_direction_input;
+	max3191x->gpio.direction_output = max3191x_direction_output;
+	max3191x->gpio.set = max3191x_set;
+	max3191x->gpio.set_multiple = max3191x_set_multiple;
+	max3191x->gpio.get = max3191x_get;
+	max3191x->gpio.get_multiple = max3191x_get_multiple;
+	max3191x->gpio.set_config = max3191x_set_config;
+
+	mutex_init(&max3191x->lock);
+
+	ret = gpiochip_add_data(&max3191x->gpio, max3191x);
+	if (ret) {
+		mutex_destroy(&max3191x->lock);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void max3191x_remove(struct spi_device *spi)
+{
+	struct max3191x_chip *max3191x = spi_get_drvdata(spi);
+
+	gpiochip_remove(&max3191x->gpio);
+	mutex_destroy(&max3191x->lock);
+}
+
+static int __init max3191x_register_driver(struct spi_driver *sdrv)
+{
+	crc8_populate_msb(max3191x_crc8, MAX3191X_CRC8_POLYNOMIAL);
+	return spi_register_driver(sdrv);
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id max3191x_of_id[] = {
+	{ .compatible = "maxim,max31910" },
+	{ .compatible = "maxim,max31911" },
+	{ .compatible = "maxim,max31912" },
+	{ .compatible = "maxim,max31913" },
+	{ .compatible = "maxim,max31953" },
+	{ .compatible = "maxim,max31963" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, max3191x_of_id);
+#endif
+
+static const struct spi_device_id max3191x_spi_id[] = {
+	{ "max31910" },
+	{ "max31911" },
+	{ "max31912" },
+	{ "max31913" },
+	{ "max31953" },
+	{ "max31963" },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, max3191x_spi_id);
+
+static struct spi_driver max3191x_driver = {
+	.driver = {
+		.name		= "max3191x",
+		.of_match_table	= of_match_ptr(max3191x_of_id),
+	},
+	.probe	  = max3191x_probe,
+	.remove	  = max3191x_remove,
+	.id_table = max3191x_spi_id,
+};
+module_driver(max3191x_driver, max3191x_register_driver, spi_unregister_driver);
+
+MODULE_AUTHOR("Lukas Wunner <lukas@wunner.de>");
+MODULE_DESCRIPTION("GPIO driver for Maxim MAX3191x industrial serializer");
+MODULE_LICENSE("GPL v2");