Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 219 insertions, 0 deletions

diff --git a/drivers/hid/hid-holtekff.c b/drivers/hid/hid-holtekff.c
new file mode 100644
index 000000000..8619b80c8
--- /dev/null
+++ b/drivers/hid/hid-holtekff.c
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Force feedback support for Holtek On Line Grip based gamepads
+ *
+ *  These include at least a Brazilian "Clone Joypad Super Power Fire"
+ *  which uses vendor ID 0x1241 and identifies as "HOLTEK On Line Grip".
+ *
+ *  Copyright (c) 2011 Anssi Hannula <anssi.hannula@iki.fi>
+ */
+
+/*
+ */
+
+#include <linux/hid.h>
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include "hid-ids.h"
+
+#ifdef CONFIG_HOLTEK_FF
+
+/*
+ * These commands and parameters are currently known:
+ *
+ * byte 0: command id:
+ * 	01  set effect parameters
+ * 	02  play specified effect
+ * 	03  stop specified effect
+ * 	04  stop all effects
+ * 	06  stop all effects
+ * 	(the difference between 04 and 06 isn't known; win driver
+ * 	 sends 06,04 on application init, and 06 otherwise)
+ * 
+ * Commands 01 and 02 need to be sent as pairs, i.e. you need to send 01
+ * before each 02.
+ *
+ * The rest of the bytes are parameters. Command 01 takes all of them, and
+ * commands 02,03 take only the effect id.
+ *
+ * byte 1:
+ *	bits 0-3: effect id:
+ * 		1: very strong rumble
+ * 		2: periodic rumble, short intervals
+ * 		3: very strong rumble
+ * 		4: periodic rumble, long intervals
+ * 		5: weak periodic rumble, long intervals
+ * 		6: weak periodic rumble, short intervals
+ * 		7: periodic rumble, short intervals
+ * 		8: strong periodic rumble, short intervals
+ * 		9: very strong rumble
+ * 		a: causes an error
+ * 		b: very strong periodic rumble, very short intervals
+ * 		c-f: nothing
+ *	bit 6: right (weak) motor enabled
+ *	bit 7: left (strong) motor enabled
+ *
+ * bytes 2-3:  time in milliseconds, big-endian
+ * bytes 5-6:  unknown (win driver seems to use at least 10e0 with effect 1
+ * 		       and 0014 with effect 6)
+ * byte 7:
+ *	bits 0-3: effect magnitude
+ */
+
+#define HOLTEKFF_MSG_LENGTH     7
+
+static const u8 start_effect_1[] = { 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00 };
+static const u8 stop_all4[] =	   { 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
+static const u8 stop_all6[] =	   { 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
+
+struct holtekff_device {
+	struct hid_field *field;
+};
+
+static void holtekff_send(struct holtekff_device *holtekff,
+			  struct hid_device *hid,
+			  const u8 data[HOLTEKFF_MSG_LENGTH])
+{
+	int i;
+
+	for (i = 0; i < HOLTEKFF_MSG_LENGTH; i++) {
+		holtekff->field->value[i] = data[i];
+	}
+
+	dbg_hid("sending %7ph\n", data);
+
+	hid_hw_request(hid, holtekff->field->report, HID_REQ_SET_REPORT);
+}
+
+static int holtekff_play(struct input_dev *dev, void *data,
+			 struct ff_effect *effect)
+{
+	struct hid_device *hid = input_get_drvdata(dev);
+	struct holtekff_device *holtekff = data;
+	int left, right;
+	/* effect type 1, length 65535 msec */
+	u8 buf[HOLTEKFF_MSG_LENGTH] =
+		{ 0x01, 0x01, 0xff, 0xff, 0x10, 0xe0, 0x00 };
+
+	left = effect->u.rumble.strong_magnitude;
+	right = effect->u.rumble.weak_magnitude;
+	dbg_hid("called with 0x%04x 0x%04x\n", left, right);
+
+	if (!left && !right) {
+		holtekff_send(holtekff, hid, stop_all6);
+		return 0;
+	}
+
+	if (left)
+		buf[1] |= 0x80;
+	if (right)
+		buf[1] |= 0x40;
+
+	/* The device takes a single magnitude, so we just sum them up. */
+	buf[6] = min(0xf, (left >> 12) + (right >> 12));
+
+	holtekff_send(holtekff, hid, buf);
+	holtekff_send(holtekff, hid, start_effect_1);
+
+	return 0;
+}
+
+static int holtekff_init(struct hid_device *hid)
+{
+	struct holtekff_device *holtekff;
+	struct hid_report *report;
+	struct hid_input *hidinput;
+	struct list_head *report_list =
+			&hid->report_enum[HID_OUTPUT_REPORT].report_list;
+	struct input_dev *dev;
+	int error;
+
+	if (list_empty(&hid->inputs)) {
+		hid_err(hid, "no inputs found\n");
+		return -ENODEV;
+	}
+	hidinput = list_entry(hid->inputs.next, struct hid_input, list);
+	dev = hidinput->input;
+
+	if (list_empty(report_list)) {
+		hid_err(hid, "no output report found\n");
+		return -ENODEV;
+	}
+
+	report = list_entry(report_list->next, struct hid_report, list);
+
+	if (report->maxfield < 1 || report->field[0]->report_count != 7) {
+		hid_err(hid, "unexpected output report layout\n");
+		return -ENODEV;
+	}
+
+	holtekff = kzalloc(sizeof(*holtekff), GFP_KERNEL);
+	if (!holtekff)
+		return -ENOMEM;
+
+	set_bit(FF_RUMBLE, dev->ffbit);
+
+	holtekff->field = report->field[0];
+
+	/* initialize the same way as win driver does */
+	holtekff_send(holtekff, hid, stop_all4);
+	holtekff_send(holtekff, hid, stop_all6);
+
+	error = input_ff_create_memless(dev, holtekff, holtekff_play);
+	if (error) {
+		kfree(holtekff);
+		return error;
+	}
+
+	hid_info(hid, "Force feedback for Holtek On Line Grip based devices by Anssi Hannula <anssi.hannula@iki.fi>\n");
+
+	return 0;
+}
+#else
+static inline int holtekff_init(struct hid_device *hid)
+{
+	return 0;
+}
+#endif
+
+static int holtek_probe(struct hid_device *hdev, const struct hid_device_id *id)
+{
+	int ret;
+
+	ret = hid_parse(hdev);
+	if (ret) {
+		hid_err(hdev, "parse failed\n");
+		goto err;
+	}
+
+	ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT & ~HID_CONNECT_FF);
+	if (ret) {
+		hid_err(hdev, "hw start failed\n");
+		goto err;
+	}
+
+	holtekff_init(hdev);
+
+	return 0;
+err:
+	return ret;
+}
+
+static const struct hid_device_id holtek_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK, USB_DEVICE_ID_HOLTEK_ON_LINE_GRIP) },
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, holtek_devices);
+
+static struct hid_driver holtek_driver = {
+	.name = "holtek",
+	.id_table = holtek_devices,
+	.probe = holtek_probe,
+};
+module_hid_driver(holtek_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Anssi Hannula <anssi.hannula@iki.fi>");
+MODULE_DESCRIPTION("Force feedback support for Holtek On Line Grip based devices");