Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 2787 insertions, 0 deletions

diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c
new file mode 100644
index 000000000..66c48f70f
--- /dev/null
+++ b/drivers/hwmon/dme1737.c
@@ -0,0 +1,2787 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * dme1737.c - Driver for the SMSC DME1737, Asus A8000, SMSC SCH311x, SCH5027,
+ *             and SCH5127 Super-I/O chips integrated hardware monitoring
+ *             features.
+ * Copyright (c) 2007, 2008, 2009, 2010 Juerg Haefliger <juergh@gmail.com>
+ *
+ * This driver is an I2C/ISA hybrid, meaning that it uses the I2C bus to access
+ * the chip registers if a DME1737, A8000, or SCH5027 is found and the ISA bus
+ * if a SCH311x or SCH5127 chip is found. Both types of chips have very
+ * similar hardware monitoring capabilities but differ in the way they can be
+ * accessed.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/hwmon-vid.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+
+/* ISA device, if found */
+static struct platform_device *pdev;
+
+/* Module load parameters */
+static bool force_start;
+module_param(force_start, bool, 0);
+MODULE_PARM_DESC(force_start, "Force the chip to start monitoring inputs");
+
+static unsigned short force_id;
+module_param(force_id, ushort, 0);
+MODULE_PARM_DESC(force_id, "Override the detected device ID");
+
+static bool probe_all_addr;
+module_param(probe_all_addr, bool, 0);
+MODULE_PARM_DESC(probe_all_addr,
+		 "Include probing of non-standard LPC addresses");
+
+/* Addresses to scan */
+static const unsigned short normal_i2c[] = {0x2c, 0x2d, 0x2e, I2C_CLIENT_END};
+
+enum chips { dme1737, sch5027, sch311x, sch5127 };
+
+#define	DO_REPORT "Please report to the driver maintainer."
+
+/* ---------------------------------------------------------------------
+ * Registers
+ *
+ * The sensors are defined as follows:
+ *
+ * Voltages                          Temperatures
+ * --------                          ------------
+ * in0   +5VTR (+5V stdby)           temp1   Remote diode 1
+ * in1   Vccp  (proc core)           temp2   Internal temp
+ * in2   VCC   (internal +3.3V)      temp3   Remote diode 2
+ * in3   +5V
+ * in4   +12V
+ * in5   VTR   (+3.3V stby)
+ * in6   Vbat
+ * in7   Vtrip (sch5127 only)
+ *
+ * --------------------------------------------------------------------- */
+
+/* Voltages (in) numbered 0-7 (ix) */
+#define DME1737_REG_IN(ix)		((ix) < 5 ? 0x20 + (ix) : \
+					 (ix) < 7 ? 0x94 + (ix) : \
+						    0x1f)
+#define DME1737_REG_IN_MIN(ix)		((ix) < 5 ? 0x44 + (ix) * 2 \
+						  : 0x91 + (ix) * 2)
+#define DME1737_REG_IN_MAX(ix)		((ix) < 5 ? 0x45 + (ix) * 2 \
+						  : 0x92 + (ix) * 2)
+
+/* Temperatures (temp) numbered 0-2 (ix) */
+#define DME1737_REG_TEMP(ix)		(0x25 + (ix))
+#define DME1737_REG_TEMP_MIN(ix)	(0x4e + (ix) * 2)
+#define DME1737_REG_TEMP_MAX(ix)	(0x4f + (ix) * 2)
+#define DME1737_REG_TEMP_OFFSET(ix)	((ix) == 0 ? 0x1f \
+						   : 0x1c + (ix))
+
+/*
+ * Voltage and temperature LSBs
+ * The LSBs (4 bits each) are stored in 5 registers with the following layouts:
+ *    IN_TEMP_LSB(0) = [in5, in6]
+ *    IN_TEMP_LSB(1) = [temp3, temp1]
+ *    IN_TEMP_LSB(2) = [in4, temp2]
+ *    IN_TEMP_LSB(3) = [in3, in0]
+ *    IN_TEMP_LSB(4) = [in2, in1]
+ *    IN_TEMP_LSB(5) = [res, in7]
+ */
+#define DME1737_REG_IN_TEMP_LSB(ix)	(0x84 + (ix))
+static const u8 DME1737_REG_IN_LSB[] = {3, 4, 4, 3, 2, 0, 0, 5};
+static const u8 DME1737_REG_IN_LSB_SHL[] = {4, 4, 0, 0, 0, 0, 4, 4};
+static const u8 DME1737_REG_TEMP_LSB[] = {1, 2, 1};
+static const u8 DME1737_REG_TEMP_LSB_SHL[] = {4, 4, 0};
+
+/* Fans numbered 0-5 (ix) */
+#define DME1737_REG_FAN(ix)		((ix) < 4 ? 0x28 + (ix) * 2 \
+						  : 0xa1 + (ix) * 2)
+#define DME1737_REG_FAN_MIN(ix)		((ix) < 4 ? 0x54 + (ix) * 2 \
+						  : 0xa5 + (ix) * 2)
+#define DME1737_REG_FAN_OPT(ix)		((ix) < 4 ? 0x90 + (ix) \
+						  : 0xb2 + (ix))
+#define DME1737_REG_FAN_MAX(ix)		(0xb4 + (ix)) /* only for fan[4-5] */
+
+/* PWMs numbered 0-2, 4-5 (ix) */
+#define DME1737_REG_PWM(ix)		((ix) < 3 ? 0x30 + (ix) \
+						  : 0xa1 + (ix))
+#define DME1737_REG_PWM_CONFIG(ix)	(0x5c + (ix)) /* only for pwm[0-2] */
+#define DME1737_REG_PWM_MIN(ix)		(0x64 + (ix)) /* only for pwm[0-2] */
+#define DME1737_REG_PWM_FREQ(ix)	((ix) < 3 ? 0x5f + (ix) \
+						  : 0xa3 + (ix))
+/*
+ * The layout of the ramp rate registers is different from the other pwm
+ * registers. The bits for the 3 PWMs are stored in 2 registers:
+ *    PWM_RR(0) = [OFF3, OFF2,  OFF1,  RES,   RR1E, RR1-2, RR1-1, RR1-0]
+ *    PWM_RR(1) = [RR2E, RR2-2, RR2-1, RR2-0, RR3E, RR3-2, RR3-1, RR3-0]
+ */
+#define DME1737_REG_PWM_RR(ix)		(0x62 + (ix)) /* only for pwm[0-2] */
+
+/* Thermal zones 0-2 */
+#define DME1737_REG_ZONE_LOW(ix)	(0x67 + (ix))
+#define DME1737_REG_ZONE_ABS(ix)	(0x6a + (ix))
+/*
+ * The layout of the hysteresis registers is different from the other zone
+ * registers. The bits for the 3 zones are stored in 2 registers:
+ *    ZONE_HYST(0) = [H1-3,  H1-2,  H1-1, H1-0, H2-3, H2-2, H2-1, H2-0]
+ *    ZONE_HYST(1) = [H3-3,  H3-2,  H3-1, H3-0, RES,  RES,  RES,  RES]
+ */
+#define DME1737_REG_ZONE_HYST(ix)	(0x6d + (ix))
+
+/*
+ * Alarm registers and bit mapping
+ * The 3 8-bit alarm registers will be concatenated to a single 32-bit
+ * alarm value [0, ALARM3, ALARM2, ALARM1].
+ */
+#define DME1737_REG_ALARM1		0x41
+#define DME1737_REG_ALARM2		0x42
+#define DME1737_REG_ALARM3		0x83
+static const u8 DME1737_BIT_ALARM_IN[] = {0, 1, 2, 3, 8, 16, 17, 18};
+static const u8 DME1737_BIT_ALARM_TEMP[] = {4, 5, 6};
+static const u8 DME1737_BIT_ALARM_FAN[] = {10, 11, 12, 13, 22, 23};
+
+/* Miscellaneous registers */
+#define DME1737_REG_DEVICE		0x3d
+#define DME1737_REG_COMPANY		0x3e
+#define DME1737_REG_VERSTEP		0x3f
+#define DME1737_REG_CONFIG		0x40
+#define DME1737_REG_CONFIG2		0x7f
+#define DME1737_REG_VID			0x43
+#define DME1737_REG_TACH_PWM		0x81
+
+/* ---------------------------------------------------------------------
+ * Misc defines
+ * --------------------------------------------------------------------- */
+
+/* Chip identification */
+#define DME1737_COMPANY_SMSC	0x5c
+#define DME1737_VERSTEP		0x88
+#define DME1737_VERSTEP_MASK	0xf8
+#define SCH311X_DEVICE		0x8c
+#define SCH5027_VERSTEP		0x69
+#define SCH5127_DEVICE		0x8e
+
+/* Device ID values (global configuration register index 0x20) */
+#define DME1737_ID_1	0x77
+#define DME1737_ID_2	0x78
+#define SCH3112_ID	0x7c
+#define SCH3114_ID	0x7d
+#define SCH3116_ID	0x7f
+#define SCH5027_ID	0x89
+#define SCH5127_ID	0x86
+
+/* Length of ISA address segment */
+#define DME1737_EXTENT	2
+
+/* chip-dependent features */
+#define HAS_TEMP_OFFSET		(1 << 0)		/* bit 0 */
+#define HAS_VID			(1 << 1)		/* bit 1 */
+#define HAS_ZONE3		(1 << 2)		/* bit 2 */
+#define HAS_ZONE_HYST		(1 << 3)		/* bit 3 */
+#define HAS_PWM_MIN		(1 << 4)		/* bit 4 */
+#define HAS_FAN(ix)		(1 << ((ix) + 5))	/* bits 5-10 */
+#define HAS_PWM(ix)		(1 << ((ix) + 11))	/* bits 11-16 */
+#define HAS_IN7			(1 << 17)		/* bit 17 */
+
+/* ---------------------------------------------------------------------
+ * Data structures and manipulation thereof
+ * --------------------------------------------------------------------- */
+
+struct dme1737_data {
+	struct i2c_client *client;	/* for I2C devices only */
+	struct device *hwmon_dev;
+	const char *name;
+	unsigned int addr;		/* for ISA devices only */
+
+	struct mutex update_lock;
+	bool valid;			/* true if following fields are valid */
+	unsigned long last_update;	/* in jiffies */
+	unsigned long last_vbat;	/* in jiffies */
+	enum chips type;
+	const int *in_nominal;		/* pointer to IN_NOMINAL array */
+
+	u8 vid;
+	u8 pwm_rr_en;
+	u32 has_features;
+
+	/* Register values */
+	u16 in[8];
+	u8  in_min[8];
+	u8  in_max[8];
+	s16 temp[3];
+	s8  temp_min[3];
+	s8  temp_max[3];
+	s8  temp_offset[3];
+	u8  config;
+	u8  config2;
+	u8  vrm;
+	u16 fan[6];
+	u16 fan_min[6];
+	u8  fan_max[2];
+	u8  fan_opt[6];
+	u8  pwm[6];
+	u8  pwm_min[3];
+	u8  pwm_config[3];
+	u8  pwm_acz[3];
+	u8  pwm_freq[6];
+	u8  pwm_rr[2];
+	s8  zone_low[3];
+	s8  zone_abs[3];
+	u8  zone_hyst[2];
+	u32 alarms;
+};
+
+/* Nominal voltage values */
+static const int IN_NOMINAL_DME1737[] = {5000, 2250, 3300, 5000, 12000, 3300,
+					 3300};
+static const int IN_NOMINAL_SCH311x[] = {2500, 1500, 3300, 5000, 12000, 3300,
+					 3300};
+static const int IN_NOMINAL_SCH5027[] = {5000, 2250, 3300, 1125, 1125, 3300,
+					 3300};
+static const int IN_NOMINAL_SCH5127[] = {2500, 2250, 3300, 1125, 1125, 3300,
+					 3300, 1500};
+#define IN_NOMINAL(type)	((type) == sch311x ? IN_NOMINAL_SCH311x : \
+				 (type) == sch5027 ? IN_NOMINAL_SCH5027 : \
+				 (type) == sch5127 ? IN_NOMINAL_SCH5127 : \
+				 IN_NOMINAL_DME1737)
+
+/*
+ * Voltage input
+ * Voltage inputs have 16 bits resolution, limit values have 8 bits
+ * resolution.
+ */
+static inline int IN_FROM_REG(int reg, int nominal, int res)
+{
+	return (reg * nominal + (3 << (res - 3))) / (3 << (res - 2));
+}
+
+static inline int IN_TO_REG(long val, int nominal)
+{
+	val = clamp_val(val, 0, 255 * nominal / 192);
+	return DIV_ROUND_CLOSEST(val * 192, nominal);
+}
+
+/*
+ * Temperature input
+ * The register values represent temperatures in 2's complement notation from
+ * -127 degrees C to +127 degrees C. Temp inputs have 16 bits resolution, limit
+ * values have 8 bits resolution.
+ */
+static inline int TEMP_FROM_REG(int reg, int res)
+{
+	return (reg * 1000) >> (res - 8);
+}
+
+static inline int TEMP_TO_REG(long val)
+{
+	val = clamp_val(val, -128000, 127000);
+	return DIV_ROUND_CLOSEST(val, 1000);
+}
+
+/* Temperature range */
+static const int TEMP_RANGE[] = {2000, 2500, 3333, 4000, 5000, 6666, 8000,
+				 10000, 13333, 16000, 20000, 26666, 32000,
+				 40000, 53333, 80000};
+
+static inline int TEMP_RANGE_FROM_REG(int reg)
+{
+	return TEMP_RANGE[(reg >> 4) & 0x0f];
+}
+
+static int TEMP_RANGE_TO_REG(long val, int reg)
+{
+	int i;
+
+	for (i = 15; i > 0; i--) {
+		if (val > (TEMP_RANGE[i] + TEMP_RANGE[i - 1] + 1) / 2)
+			break;
+	}
+
+	return (reg & 0x0f) | (i << 4);
+}
+
+/*
+ * Temperature hysteresis
+ * Register layout:
+ *    reg[0] = [H1-3, H1-2, H1-1, H1-0, H2-3, H2-2, H2-1, H2-0]
+ *    reg[1] = [H3-3, H3-2, H3-1, H3-0, xxxx, xxxx, xxxx, xxxx]
+ */
+static inline int TEMP_HYST_FROM_REG(int reg, int ix)
+{
+	return (((ix == 1) ? reg : reg >> 4) & 0x0f) * 1000;
+}
+
+static inline int TEMP_HYST_TO_REG(int temp, long hyst, int ix, int reg)
+{
+	hyst = clamp_val(hyst, temp - 15000, temp);
+	hyst = DIV_ROUND_CLOSEST(temp - hyst, 1000);
+
+	return (ix == 1) ? (reg & 0xf0) | hyst : (reg & 0x0f) | (hyst << 4);
+}
+
+/* Fan input RPM */
+static inline int FAN_FROM_REG(int reg, int tpc)
+{
+	if (tpc)
+		return tpc * reg;
+	else
+		return (reg == 0 || reg == 0xffff) ? 0 : 90000 * 60 / reg;
+}
+
+static inline int FAN_TO_REG(long val, int tpc)
+{
+	if (tpc) {
+		return clamp_val(val / tpc, 0, 0xffff);
+	} else {
+		return (val <= 0) ? 0xffff :
+			clamp_val(90000 * 60 / val, 0, 0xfffe);
+	}
+}
+
+/*
+ * Fan TPC (tach pulse count)
+ * Converts a register value to a TPC multiplier or returns 0 if the tachometer
+ * is configured in legacy (non-tpc) mode
+ */
+static inline int FAN_TPC_FROM_REG(int reg)
+{
+	return (reg & 0x20) ? 0 : 60 >> (reg & 0x03);
+}
+
+/*
+ * Fan type
+ * The type of a fan is expressed in number of pulses-per-revolution that it
+ * emits
+ */
+static inline int FAN_TYPE_FROM_REG(int reg)
+{
+	int edge = (reg >> 1) & 0x03;
+
+	return (edge > 0) ? 1 << (edge - 1) : 0;
+}
+
+static inline int FAN_TYPE_TO_REG(long val, int reg)
+{
+	int edge = (val == 4) ? 3 : val;
+
+	return (reg & 0xf9) | (edge << 1);
+}
+
+/* Fan max RPM */
+static const int FAN_MAX[] = {0x54, 0x38, 0x2a, 0x21, 0x1c, 0x18, 0x15, 0x12,
+			      0x11, 0x0f, 0x0e};
+
+static int FAN_MAX_FROM_REG(int reg)
+{
+	int i;
+
+	for (i = 10; i > 0; i--) {
+		if (reg == FAN_MAX[i])
+			break;
+	}
+
+	return 1000 + i * 500;
+}
+
+static int FAN_MAX_TO_REG(long val)
+{
+	int i;
+
+	for (i = 10; i > 0; i--) {
+		if (val > (1000 + (i - 1) * 500))
+			break;
+	}
+
+	return FAN_MAX[i];
+}
+
+/*
+ * PWM enable
+ * Register to enable mapping:
+ * 000:  2  fan on zone 1 auto
+ * 001:  2  fan on zone 2 auto
+ * 010:  2  fan on zone 3 auto
+ * 011:  0  fan full on
+ * 100: -1  fan disabled
+ * 101:  2  fan on hottest of zones 2,3 auto
+ * 110:  2  fan on hottest of zones 1,2,3 auto
+ * 111:  1  fan in manual mode
+ */
+static inline int PWM_EN_FROM_REG(int reg)
+{
+	static const int en[] = {2, 2, 2, 0, -1, 2, 2, 1};
+
+	return en[(reg >> 5) & 0x07];
+}
+
+static inline int PWM_EN_TO_REG(int val, int reg)
+{
+	int en = (val == 1) ? 7 : 3;
+
+	return (reg & 0x1f) | ((en & 0x07) << 5);
+}
+
+/*
+ * PWM auto channels zone
+ * Register to auto channels zone mapping (ACZ is a bitfield with bit x
+ * corresponding to zone x+1):
+ * 000: 001  fan on zone 1 auto
+ * 001: 010  fan on zone 2 auto
+ * 010: 100  fan on zone 3 auto
+ * 011: 000  fan full on
+ * 100: 000  fan disabled
+ * 101: 110  fan on hottest of zones 2,3 auto
+ * 110: 111  fan on hottest of zones 1,2,3 auto
+ * 111: 000  fan in manual mode
+ */
+static inline int PWM_ACZ_FROM_REG(int reg)
+{
+	static const int acz[] = {1, 2, 4, 0, 0, 6, 7, 0};
+
+	return acz[(reg >> 5) & 0x07];
+}
+
+static inline int PWM_ACZ_TO_REG(long val, int reg)
+{
+	int acz = (val == 4) ? 2 : val - 1;
+
+	return (reg & 0x1f) | ((acz & 0x07) << 5);
+}
+
+/* PWM frequency */
+static const int PWM_FREQ[] = {11, 15, 22, 29, 35, 44, 59, 88,
+			       15000, 20000, 30000, 25000, 0, 0, 0, 0};
+
+static inline int PWM_FREQ_FROM_REG(int reg)
+{
+	return PWM_FREQ[reg & 0x0f];
+}
+
+static int PWM_FREQ_TO_REG(long val, int reg)
+{
+	int i;
+
+	/* the first two cases are special - stupid chip design! */
+	if (val > 27500) {
+		i = 10;
+	} else if (val > 22500) {
+		i = 11;
+	} else {
+		for (i = 9; i > 0; i--) {
+			if (val > (PWM_FREQ[i] + PWM_FREQ[i - 1] + 1) / 2)
+				break;
+		}
+	}
+
+	return (reg & 0xf0) | i;
+}
+
+/*
+ * PWM ramp rate
+ * Register layout:
+ *    reg[0] = [OFF3,  OFF2,  OFF1,  RES,   RR1-E, RR1-2, RR1-1, RR1-0]
+ *    reg[1] = [RR2-E, RR2-2, RR2-1, RR2-0, RR3-E, RR3-2, RR3-1, RR3-0]
+ */
+static const u8 PWM_RR[] = {206, 104, 69, 41, 26, 18, 10, 5};
+
+static inline int PWM_RR_FROM_REG(int reg, int ix)
+{
+	int rr = (ix == 1) ? reg >> 4 : reg;
+
+	return (rr & 0x08) ? PWM_RR[rr & 0x07] : 0;
+}
+
+static int PWM_RR_TO_REG(long val, int ix, int reg)
+{
+	int i;
+
+	for (i = 0; i < 7; i++) {
+		if (val > (PWM_RR[i] + PWM_RR[i + 1] + 1) / 2)
+			break;
+	}
+
+	return (ix == 1) ? (reg & 0x8f) | (i << 4) : (reg & 0xf8) | i;
+}
+
+/* PWM ramp rate enable */
+static inline int PWM_RR_EN_FROM_REG(int reg, int ix)
+{
+	return PWM_RR_FROM_REG(reg, ix) ? 1 : 0;
+}
+
+static inline int PWM_RR_EN_TO_REG(long val, int ix, int reg)
+{
+	int en = (ix == 1) ? 0x80 : 0x08;
+
+	return val ? reg | en : reg & ~en;
+}
+
+/*
+ * PWM min/off
+ * The PWM min/off bits are part of the PMW ramp rate register 0 (see above for
+ * the register layout).
+ */
+static inline int PWM_OFF_FROM_REG(int reg, int ix)
+{
+	return (reg >> (ix + 5)) & 0x01;
+}
+
+static inline int PWM_OFF_TO_REG(int val, int ix, int reg)
+{
+	return (reg & ~(1 << (ix + 5))) | ((val & 0x01) << (ix + 5));
+}
+
+/* ---------------------------------------------------------------------
+ * Device I/O access
+ *
+ * ISA access is performed through an index/data register pair and needs to
+ * be protected by a mutex during runtime (not required for initialization).
+ * We use data->update_lock for this and need to ensure that we acquire it
+ * before calling dme1737_read or dme1737_write.
+ * --------------------------------------------------------------------- */
+
+static u8 dme1737_read(const struct dme1737_data *data, u8 reg)
+{
+	struct i2c_client *client = data->client;
+	s32 val;
+
+	if (client) { /* I2C device */
+		val = i2c_smbus_read_byte_data(client, reg);
+
+		if (val < 0) {
+			dev_warn(&client->dev,
+				 "Read from register 0x%02x failed! %s\n",
+				 reg, DO_REPORT);
+		}
+	} else { /* ISA device */
+		outb(reg, data->addr);
+		val = inb(data->addr + 1);
+	}
+
+	return val;
+}
+
+static s32 dme1737_write(const struct dme1737_data *data, u8 reg, u8 val)
+{
+	struct i2c_client *client = data->client;
+	s32 res = 0;
+
+	if (client) { /* I2C device */
+		res = i2c_smbus_write_byte_data(client, reg, val);
+
+		if (res < 0) {
+			dev_warn(&client->dev,
+				 "Write to register 0x%02x failed! %s\n",
+				 reg, DO_REPORT);
+		}
+	} else { /* ISA device */
+		outb(reg, data->addr);
+		outb(val, data->addr + 1);
+	}
+
+	return res;
+}
+
+static struct dme1737_data *dme1737_update_device(struct device *dev)
+{
+	struct dme1737_data *data = dev_get_drvdata(dev);
+	int ix;
+	u8 lsb[6];
+
+	mutex_lock(&data->update_lock);
+
+	/* Enable a Vbat monitoring cycle every 10 mins */
+	if (time_after(jiffies, data->last_vbat + 600 * HZ) || !data->valid) {
+		dme1737_write(data, DME1737_REG_CONFIG, dme1737_read(data,
+						DME1737_REG_CONFIG) | 0x10);
+		data->last_vbat = jiffies;
+	}
+
+	/* Sample register contents every 1 sec */
+	if (time_after(jiffies, data->last_update + HZ) || !data->valid) {
+		if (data->has_features & HAS_VID) {
+			data->vid = dme1737_read(data, DME1737_REG_VID) &
+				0x3f;
+		}
+
+		/* In (voltage) registers */
+		for (ix = 0; ix < ARRAY_SIZE(data->in); ix++) {
+			/*
+			 * Voltage inputs are stored as 16 bit values even
+			 * though they have only 12 bits resolution. This is
+			 * to make it consistent with the temp inputs.
+			 */
+			if (ix == 7 && !(data->has_features & HAS_IN7))
+				continue;
+			data->in[ix] = dme1737_read(data,
+					DME1737_REG_IN(ix)) << 8;
+			data->in_min[ix] = dme1737_read(data,
+					DME1737_REG_IN_MIN(ix));
+			data->in_max[ix] = dme1737_read(data,
+					DME1737_REG_IN_MAX(ix));
+		}
+
+		/* Temp registers */
+		for (ix = 0; ix < ARRAY_SIZE(data->temp); ix++) {
+			/*
+			 * Temp inputs are stored as 16 bit values even
+			 * though they have only 12 bits resolution. This is
+			 * to take advantage of implicit conversions between
+			 * register values (2's complement) and temp values
+			 * (signed decimal).
+			 */
+			data->temp[ix] = dme1737_read(data,
+					DME1737_REG_TEMP(ix)) << 8;
+			data->temp_min[ix] = dme1737_read(data,
+					DME1737_REG_TEMP_MIN(ix));
+			data->temp_max[ix] = dme1737_read(data,
+					DME1737_REG_TEMP_MAX(ix));
+			if (data->has_features & HAS_TEMP_OFFSET) {
+				data->temp_offset[ix] = dme1737_read(data,
+						DME1737_REG_TEMP_OFFSET(ix));
+			}
+		}
+
+		/*
+		 * In and temp LSB registers
+		 * The LSBs are latched when the MSBs are read, so the order in
+		 * which the registers are read (MSB first, then LSB) is
+		 * important!
+		 */
+		for (ix = 0; ix < ARRAY_SIZE(lsb); ix++) {
+			if (ix == 5 && !(data->has_features & HAS_IN7))
+				continue;
+			lsb[ix] = dme1737_read(data,
+					DME1737_REG_IN_TEMP_LSB(ix));
+		}
+		for (ix = 0; ix < ARRAY_SIZE(data->in); ix++) {
+			if (ix == 7 && !(data->has_features & HAS_IN7))
+				continue;
+			data->in[ix] |= (lsb[DME1737_REG_IN_LSB[ix]] <<
+					DME1737_REG_IN_LSB_SHL[ix]) & 0xf0;
+		}
+		for (ix = 0; ix < ARRAY_SIZE(data->temp); ix++) {
+			data->temp[ix] |= (lsb[DME1737_REG_TEMP_LSB[ix]] <<
+					DME1737_REG_TEMP_LSB_SHL[ix]) & 0xf0;
+		}
+
+		/* Fan registers */
+		for (ix = 0; ix < ARRAY_SIZE(data->fan); ix++) {
+			/*
+			 * Skip reading registers if optional fans are not
+			 * present
+			 */
+			if (!(data->has_features & HAS_FAN(ix)))
+				continue;
+			data->fan[ix] = dme1737_read(data,
+					DME1737_REG_FAN(ix));
+			data->fan[ix] |= dme1737_read(data,
+					DME1737_REG_FAN(ix) + 1) << 8;
+			data->fan_min[ix] = dme1737_read(data,
+					DME1737_REG_FAN_MIN(ix));
+			data->fan_min[ix] |= dme1737_read(data,
+					DME1737_REG_FAN_MIN(ix) + 1) << 8;
+			data->fan_opt[ix] = dme1737_read(data,
+					DME1737_REG_FAN_OPT(ix));
+			/* fan_max exists only for fan[5-6] */
+			if (ix > 3) {
+				data->fan_max[ix - 4] = dme1737_read(data,
+					DME1737_REG_FAN_MAX(ix));
+			}
+		}
+
+		/* PWM registers */
+		for (ix = 0; ix < ARRAY_SIZE(data->pwm); ix++) {
+			/*
+			 * Skip reading registers if optional PWMs are not
+			 * present
+			 */
+			if (!(data->has_features & HAS_PWM(ix)))
+				continue;
+			data->pwm[ix] = dme1737_read(data,
+					DME1737_REG_PWM(ix));
+			data->pwm_freq[ix] = dme1737_read(data,
+					DME1737_REG_PWM_FREQ(ix));
+			/* pwm_config and pwm_min exist only for pwm[1-3] */
+			if (ix < 3) {
+				data->pwm_config[ix] = dme1737_read(data,
+						DME1737_REG_PWM_CONFIG(ix));
+				data->pwm_min[ix] = dme1737_read(data,
+						DME1737_REG_PWM_MIN(ix));
+			}
+		}
+		for (ix = 0; ix < ARRAY_SIZE(data->pwm_rr); ix++) {
+			data->pwm_rr[ix] = dme1737_read(data,
+						DME1737_REG_PWM_RR(ix));
+		}
+
+		/* Thermal zone registers */
+		for (ix = 0; ix < ARRAY_SIZE(data->zone_low); ix++) {
+			/* Skip reading registers if zone3 is not present */
+			if ((ix == 2) && !(data->has_features & HAS_ZONE3))
+				continue;
+			/* sch5127 zone2 registers are special */
+			if ((ix == 1) && (data->type == sch5127)) {
+				data->zone_low[1] = dme1737_read(data,
+						DME1737_REG_ZONE_LOW(2));
+				data->zone_abs[1] = dme1737_read(data,
+						DME1737_REG_ZONE_ABS(2));
+			} else {
+				data->zone_low[ix] = dme1737_read(data,
+						DME1737_REG_ZONE_LOW(ix));
+				data->zone_abs[ix] = dme1737_read(data,
+						DME1737_REG_ZONE_ABS(ix));
+			}
+		}
+		if (data->has_features & HAS_ZONE_HYST) {
+			for (ix = 0; ix < ARRAY_SIZE(data->zone_hyst); ix++) {
+				data->zone_hyst[ix] = dme1737_read(data,
+						DME1737_REG_ZONE_HYST(ix));
+			}
+		}
+
+		/* Alarm registers */
+		data->alarms = dme1737_read(data,
+						DME1737_REG_ALARM1);
+		/*
+		 * Bit 7 tells us if the other alarm registers are non-zero and
+		 * therefore also need to be read
+		 */
+		if (data->alarms & 0x80) {
+			data->alarms |= dme1737_read(data,
+						DME1737_REG_ALARM2) << 8;
+			data->alarms |= dme1737_read(data,
+						DME1737_REG_ALARM3) << 16;
+		}
+
+		/*
+		 * The ISA chips require explicit clearing of alarm bits.
+		 * Don't worry, an alarm will come back if the condition
+		 * that causes it still exists
+		 */
+		if (!data->client) {
+			if (data->alarms & 0xff0000)
+				dme1737_write(data, DME1737_REG_ALARM3, 0xff);
+			if (data->alarms & 0xff00)
+				dme1737_write(data, DME1737_REG_ALARM2, 0xff);
+			if (data->alarms & 0xff)
+				dme1737_write(data, DME1737_REG_ALARM1, 0xff);
+		}
+
+		data->last_update = jiffies;
+		data->valid = true;
+	}
+
+	mutex_unlock(&data->update_lock);
+
+	return data;
+}
+
+/* ---------------------------------------------------------------------
+ * Voltage sysfs attributes
+ * ix = [0-7]
+ * --------------------------------------------------------------------- */
+
+#define SYS_IN_INPUT	0
+#define SYS_IN_MIN	1
+#define SYS_IN_MAX	2
+#define SYS_IN_ALARM	3
+
+static ssize_t show_in(struct device *dev, struct device_attribute *attr,
+		       char *buf)
+{
+	struct dme1737_data *data = dme1737_update_device(dev);
+	struct sensor_device_attribute_2
+		*sensor_attr_2 = to_sensor_dev_attr_2(attr);
+	int ix = sensor_attr_2->index;
+	int fn = sensor_attr_2->nr;
+	int res;
+
+	switch (fn) {
+	case SYS_IN_INPUT:
+		res = IN_FROM_REG(data->in[ix], data->in_nominal[ix], 16);
+		break;
+	case SYS_IN_MIN:
+		res = IN_FROM_REG(data->in_min[ix], data->in_nominal[ix], 8);
+		break;
+	case SYS_IN_MAX:
+		res = IN_FROM_REG(data->in_max[ix], data->in_nominal[ix], 8);
+		break;
+	case SYS_IN_ALARM:
+		res = (data->alarms >> DME1737_BIT_ALARM_IN[ix]) & 0x01;
+		break;
+	default:
+		res = 0;
+		dev_dbg(dev, "Unknown function %d.\n", fn);
+	}
+
+	return sprintf(buf, "%d\n", res);
+}
+
+static ssize_t set_in(struct device *dev, struct device_attribute *attr,
+		      const char *buf, size_t count)
+{
+	struct dme1737_data *data = dev_get_drvdata(dev);
+	struct sensor_device_attribute_2
+		*sensor_attr_2 = to_sensor_dev_attr_2(attr);
+	int ix = sensor_attr_2->index;
+	int fn = sensor_attr_2->nr;
+	long val;
+	int err;
+
+	err = kstrtol(buf, 10, &val);
+	if (err)
+		return err;
+
+	mutex_lock(&data->update_lock);
+	switch (fn) {
+	case SYS_IN_MIN:
+		data->in_min[ix] = IN_TO_REG(val, data->in_nominal[ix]);
+		dme1737_write(data, DME1737_REG_IN_MIN(ix),
+			      data->in_min[ix]);
+		break;
+	case SYS_IN_MAX:
+		data->in_max[ix] = IN_TO_REG(val, data->in_nominal[ix]);
+		dme1737_write(data, DME1737_REG_IN_MAX(ix),
+			      data->in_max[ix]);
+		break;
+	default:
+		dev_dbg(dev, "Unknown function %d.\n", fn);
+	}
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+/* ---------------------------------------------------------------------
+ * Temperature sysfs attributes
+ * ix = [0-2]
+ * --------------------------------------------------------------------- */
+
+#define SYS_TEMP_INPUT			0
+#define SYS_TEMP_MIN			1
+#define SYS_TEMP_MAX			2
+#define SYS_TEMP_OFFSET			3
+#define SYS_TEMP_ALARM			4
+#define SYS_TEMP_FAULT			5
+
+static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct dme1737_data *data = dme1737_update_device(dev);
+	struct sensor_device_attribute_2
+		*sensor_attr_2 = to_sensor_dev_attr_2(attr);
+	int ix = sensor_attr_2->index;
+	int fn = sensor_attr_2->nr;
+	int res;
+
+	switch (fn) {
+	case SYS_TEMP_INPUT:
+		res = TEMP_FROM_REG(data->temp[ix], 16);
+		break;
+	case SYS_TEMP_MIN:
+		res = TEMP_FROM_REG(data->temp_min[ix], 8);
+		break;
+	case SYS_TEMP_MAX:
+		res = TEMP_FROM_REG(data->temp_max[ix], 8);
+		break;
+	case SYS_TEMP_OFFSET:
+		res = TEMP_FROM_REG(data->temp_offset[ix], 8);
+		break;
+	case SYS_TEMP_ALARM:
+		res = (data->alarms >> DME1737_BIT_ALARM_TEMP[ix]) & 0x01;
+		break;
+	case SYS_TEMP_FAULT:
+		res = (((u16)data->temp[ix] & 0xff00) == 0x8000);
+		break;
+	default:
+		res = 0;
+		dev_dbg(dev, "Unknown function %d.\n", fn);
+	}
+
+	return sprintf(buf, "%d\n", res);
+}
+
+static ssize_t set_temp(struct device *dev, struct device_attribute *attr,
+			const char *buf, size_t count)
+{
+	struct dme1737_data *data = dev_get_drvdata(dev);
+	struct sensor_device_attribute_2
+		*sensor_attr_2 = to_sensor_dev_attr_2(attr);
+	int ix = sensor_attr_2->index;
+	int fn = sensor_attr_2->nr;
+	long val;
+	int err;
+
+	err = kstrtol(buf, 10, &val);
+	if (err)
+		return err;
+
+	mutex_lock(&data->update_lock);
+	switch (fn) {
+	case SYS_TEMP_MIN:
+		data->temp_min[ix] = TEMP_TO_REG(val);
+		dme1737_write(data, DME1737_REG_TEMP_MIN(ix),
+			      data->temp_min[ix]);
+		break;
+	case SYS_TEMP_MAX:
+		data->temp_max[ix] = TEMP_TO_REG(val);
+		dme1737_write(data, DME1737_REG_TEMP_MAX(ix),
+			      data->temp_max[ix]);
+		break;
+	case SYS_TEMP_OFFSET:
+		data->temp_offset[ix] = TEMP_TO_REG(val);
+		dme1737_write(data, DME1737_REG_TEMP_OFFSET(ix),
+			      data->temp_offset[ix]);
+		break;
+	default:
+		dev_dbg(dev, "Unknown function %d.\n", fn);
+	}
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+/* ---------------------------------------------------------------------
+ * Zone sysfs attributes
+ * ix = [0-2]
+ * --------------------------------------------------------------------- */
+
+#define SYS_ZONE_AUTO_CHANNELS_TEMP	0
+#define SYS_ZONE_AUTO_POINT1_TEMP_HYST	1
+#define SYS_ZONE_AUTO_POINT1_TEMP	2
+#define SYS_ZONE_AUTO_POINT2_TEMP	3
+#define SYS_ZONE_AUTO_POINT3_TEMP	4
+
+static ssize_t show_zone(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct dme1737_data *data = dme1737_update_device(dev);
+	struct sensor_device_attribute_2
+		*sensor_attr_2 = to_sensor_dev_attr_2(attr);
+	int ix = sensor_attr_2->index;
+	int fn = sensor_attr_2->nr;
+	int res;
+
+	switch (fn) {
+	case SYS_ZONE_AUTO_CHANNELS_TEMP:
+		/* check config2 for non-standard temp-to-zone mapping */
+		if ((ix == 1) && (data->config2 & 0x02))
+			res = 4;
+		else
+			res = 1 << ix;
+		break;
+	case SYS_ZONE_AUTO_POINT1_TEMP_HYST:
+		res = TEMP_FROM_REG(data->zone_low[ix], 8) -
+		      TEMP_HYST_FROM_REG(data->zone_hyst[ix == 2], ix);
+		break;
+	case SYS_ZONE_AUTO_POINT1_TEMP:
+		res = TEMP_FROM_REG(data->zone_low[ix], 8);
+		break;
+	case SYS_ZONE_AUTO_POINT2_TEMP:
+		/* pwm_freq holds the temp range bits in the upper nibble */
+		res = TEMP_FROM_REG(data->zone_low[ix], 8) +
+		      TEMP_RANGE_FROM_REG(data->pwm_freq[ix]);
+		break;
+	case SYS_ZONE_AUTO_POINT3_TEMP:
+		res = TEMP_FROM_REG(data->zone_abs[ix], 8);
+		break;
+	default:
+		res = 0;
+		dev_dbg(dev, "Unknown function %d.\n", fn);
+	}
+
+	return sprintf(buf, "%d\n", res);
+}
+
+static ssize_t set_zone(struct device *dev, struct device_attribute *attr,
+			const char *buf, size_t count)
+{
+	struct dme1737_data *data = dev_get_drvdata(dev);
+	struct sensor_device_attribute_2
+		*sensor_attr_2 = to_sensor_dev_attr_2(attr);
+	int ix = sensor_attr_2->index;
+	int fn = sensor_attr_2->nr;
+	long val;
+	int temp;
+	int err;
+	u8 reg;
+
+	err = kstrtol(buf, 10, &val);
+	if (err)
+		return err;
+
+	mutex_lock(&data->update_lock);
+	switch (fn) {
+	case SYS_ZONE_AUTO_POINT1_TEMP_HYST:
+		/* Refresh the cache */
+		data->zone_low[ix] = dme1737_read(data,
+						  DME1737_REG_ZONE_LOW(ix));
+		/* Modify the temp hyst value */
+		temp = TEMP_FROM_REG(data->zone_low[ix], 8);
+		reg = dme1737_read(data, DME1737_REG_ZONE_HYST(ix == 2));
+		data->zone_hyst[ix == 2] = TEMP_HYST_TO_REG(temp, val, ix, reg);
+		dme1737_write(data, DME1737_REG_ZONE_HYST(ix == 2),
+			      data->zone_hyst[ix == 2]);
+		break;
+	case SYS_ZONE_AUTO_POINT1_TEMP:
+		data->zone_low[ix] = TEMP_TO_REG(val);
+		dme1737_write(data, DME1737_REG_ZONE_LOW(ix),
+			      data->zone_low[ix]);
+		break;
+	case SYS_ZONE_AUTO_POINT2_TEMP:
+		/* Refresh the cache */
+		data->zone_low[ix] = dme1737_read(data,
+						  DME1737_REG_ZONE_LOW(ix));
+		/*
+		 * Modify the temp range value (which is stored in the upper
+		 * nibble of the pwm_freq register)
+		 */
+		temp = TEMP_FROM_REG(data->zone_low[ix], 8);
+		val = clamp_val(val, temp, temp + 80000);
+		reg = dme1737_read(data, DME1737_REG_PWM_FREQ(ix));
+		data->pwm_freq[ix] = TEMP_RANGE_TO_REG(val - temp, reg);
+		dme1737_write(data, DME1737_REG_PWM_FREQ(ix),
+			      data->pwm_freq[ix]);
+		break;
+	case SYS_ZONE_AUTO_POINT3_TEMP:
+		data->zone_abs[ix] = TEMP_TO_REG(val);
+		dme1737_write(data, DME1737_REG_ZONE_ABS(ix),
+			      data->zone_abs[ix]);
+		break;
+	default:
+		dev_dbg(dev, "Unknown function %d.\n", fn);
+	}
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+/* ---------------------------------------------------------------------
+ * Fan sysfs attributes
+ * ix = [0-5]
+ * --------------------------------------------------------------------- */
+
+#define SYS_FAN_INPUT	0
+#define SYS_FAN_MIN	1
+#define SYS_FAN_MAX	2
+#define SYS_FAN_ALARM	3
+#define SYS_FAN_TYPE	4
+
+static ssize_t show_fan(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	struct dme1737_data *data = dme1737_update_device(dev);
+	struct sensor_device_attribute_2
+		*sensor_attr_2 = to_sensor_dev_attr_2(attr);
+	int ix = sensor_attr_2->index;
+	int fn = sensor_attr_2->nr;
+	int res;
+
+	switch (fn) {
+	case SYS_FAN_INPUT:
+		res = FAN_FROM_REG(data->fan[ix],
+				   ix < 4 ? 0 :
+				   FAN_TPC_FROM_REG(data->fan_opt[ix]));
+		break;
+	case SYS_FAN_MIN:
+		res = FAN_FROM_REG(data->fan_min[ix],
+				   ix < 4 ? 0 :
+				   FAN_TPC_FROM_REG(data->fan_opt[ix]));
+		break;
+	case SYS_FAN_MAX:
+		/* only valid for fan[5-6] */
+		res = FAN_MAX_FROM_REG(data->fan_max[ix - 4]);
+		break;
+	case SYS_FAN_ALARM:
+		res = (data->alarms >> DME1737_BIT_ALARM_FAN[ix]) & 0x01;
+		break;
+	case SYS_FAN_TYPE:
+		/* only valid for fan[1-4] */
+		res = FAN_TYPE_FROM_REG(data->fan_opt[ix]);
+		break;
+	default:
+		res = 0;
+		dev_dbg(dev, "Unknown function %d.\n", fn);
+	}
+
+	return sprintf(buf, "%d\n", res);
+}
+
+static ssize_t set_fan(struct device *dev, struct device_attribute *attr,
+		       const char *buf, size_t count)
+{
+	struct dme1737_data *data = dev_get_drvdata(dev);
+	struct sensor_device_attribute_2
+		*sensor_attr_2 = to_sensor_dev_attr_2(attr);
+	int ix = sensor_attr_2->index;
+	int fn = sensor_attr_2->nr;
+	long val;
+	int err;
+
+	err = kstrtol(buf, 10, &val);
+	if (err)
+		return err;
+
+	mutex_lock(&data->update_lock);
+	switch (fn) {
+	case SYS_FAN_MIN:
+		if (ix < 4) {
+			data->fan_min[ix] = FAN_TO_REG(val, 0);
+		} else {
+			/* Refresh the cache */
+			data->fan_opt[ix] = dme1737_read(data,
+						DME1737_REG_FAN_OPT(ix));
+			/* Modify the fan min value */
+			data->fan_min[ix] = FAN_TO_REG(val,
+					FAN_TPC_FROM_REG(data->fan_opt[ix]));
+		}
+		dme1737_write(data, DME1737_REG_FAN_MIN(ix),
+			      data->fan_min[ix] & 0xff);
+		dme1737_write(data, DME1737_REG_FAN_MIN(ix) + 1,
+			      data->fan_min[ix] >> 8);
+		break;
+	case SYS_FAN_MAX:
+		/* Only valid for fan[5-6] */
+		data->fan_max[ix - 4] = FAN_MAX_TO_REG(val);
+		dme1737_write(data, DME1737_REG_FAN_MAX(ix),
+			      data->fan_max[ix - 4]);
+		break;
+	case SYS_FAN_TYPE:
+		/* Only valid for fan[1-4] */
+		if (!(val == 1 || val == 2 || val == 4)) {
+			count = -EINVAL;
+			dev_warn(dev,
+				 "Fan type value %ld not supported. Choose one of 1, 2, or 4.\n",
+				 val);
+			goto exit;
+		}
+		data->fan_opt[ix] = FAN_TYPE_TO_REG(val, dme1737_read(data,
+					DME1737_REG_FAN_OPT(ix)));
+		dme1737_write(data, DME1737_REG_FAN_OPT(ix),
+			      data->fan_opt[ix]);
+		break;
+	default:
+		dev_dbg(dev, "Unknown function %d.\n", fn);
+	}
+exit:
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+/* ---------------------------------------------------------------------
+ * PWM sysfs attributes
+ * ix = [0-4]
+ * --------------------------------------------------------------------- */
+
+#define SYS_PWM				0
+#define SYS_PWM_FREQ			1
+#define SYS_PWM_ENABLE			2
+#define SYS_PWM_RAMP_RATE		3
+#define SYS_PWM_AUTO_CHANNELS_ZONE	4
+#define SYS_PWM_AUTO_PWM_MIN		5
+#define SYS_PWM_AUTO_POINT1_PWM		6
+#define SYS_PWM_AUTO_POINT2_PWM		7
+
+static ssize_t show_pwm(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	struct dme1737_data *data = dme1737_update_device(dev);
+	struct sensor_device_attribute_2
+		*sensor_attr_2 = to_sensor_dev_attr_2(attr);
+	int ix = sensor_attr_2->index;
+	int fn = sensor_attr_2->nr;
+	int res;
+
+	switch (fn) {
+	case SYS_PWM:
+		if (PWM_EN_FROM_REG(data->pwm_config[ix]) == 0)
+			res = 255;
+		else
+			res = data->pwm[ix];
+		break;
+	case SYS_PWM_FREQ:
+		res = PWM_FREQ_FROM_REG(data->pwm_freq[ix]);
+		break;
+	case SYS_PWM_ENABLE:
+		if (ix >= 3)
+			res = 1; /* pwm[5-6] hard-wired to manual mode */
+		else
+			res = PWM_EN_FROM_REG(data->pwm_config[ix]);
+		break;
+	case SYS_PWM_RAMP_RATE:
+		/* Only valid for pwm[1-3] */
+		res = PWM_RR_FROM_REG(data->pwm_rr[ix > 0], ix);
+		break;
+	case SYS_PWM_AUTO_CHANNELS_ZONE:
+		/* Only valid for pwm[1-3] */
+		if (PWM_EN_FROM_REG(data->pwm_config[ix]) == 2)
+			res = PWM_ACZ_FROM_REG(data->pwm_config[ix]);
+		else
+			res = data->pwm_acz[ix];
+		break;
+	case SYS_PWM_AUTO_PWM_MIN:
+		/* Only valid for pwm[1-3] */
+		if (PWM_OFF_FROM_REG(data->pwm_rr[0], ix))
+			res = data->pwm_min[ix];
+		else
+			res = 0;
+		break;
+	case SYS_PWM_AUTO_POINT1_PWM:
+		/* Only valid for pwm[1-3] */
+		res = data->pwm_min[ix];
+		break;
+	case SYS_PWM_AUTO_POINT2_PWM:
+		/* Only valid for pwm[1-3] */
+		res = 255; /* hard-wired */
+		break;
+	default:
+		res = 0;
+		dev_dbg(dev, "Unknown function %d.\n", fn);
+	}
+
+	return sprintf(buf, "%d\n", res);
+}
+
+static struct attribute *dme1737_pwm_chmod_attr[];
+static void dme1737_chmod_file(struct device*, struct attribute*, umode_t);
+
+static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
+		       const char *buf, size_t count)
+{
+	struct dme1737_data *data = dev_get_drvdata(dev);
+	struct sensor_device_attribute_2
+		*sensor_attr_2 = to_sensor_dev_attr_2(attr);
+	int ix = sensor_attr_2->index;
+	int fn = sensor_attr_2->nr;
+	long val;
+	int err;
+
+	err = kstrtol(buf, 10, &val);
+	if (err)
+		return err;
+
+	mutex_lock(&data->update_lock);
+	switch (fn) {
+	case SYS_PWM:
+		data->pwm[ix] = clamp_val(val, 0, 255);
+		dme1737_write(data, DME1737_REG_PWM(ix), data->pwm[ix]);
+		break;
+	case SYS_PWM_FREQ:
+		data->pwm_freq[ix] = PWM_FREQ_TO_REG(val, dme1737_read(data,
+						DME1737_REG_PWM_FREQ(ix)));
+		dme1737_write(data, DME1737_REG_PWM_FREQ(ix),
+			      data->pwm_freq[ix]);
+		break;
+	case SYS_PWM_ENABLE:
+		/* Only valid for pwm[1-3] */
+		if (val < 0 || val > 2) {
+			count = -EINVAL;
+			dev_warn(dev,
+				 "PWM enable %ld not supported. Choose one of 0, 1, or 2.\n",
+				 val);
+			goto exit;
+		}
+		/* Refresh the cache */
+		data->pwm_config[ix] = dme1737_read(data,
+						DME1737_REG_PWM_CONFIG(ix));
+		if (val == PWM_EN_FROM_REG(data->pwm_config[ix])) {
+			/* Bail out if no change */
+			goto exit;
+		}
+		/* Do some housekeeping if we are currently in auto mode */
+		if (PWM_EN_FROM_REG(data->pwm_config[ix]) == 2) {
+			/* Save the current zone channel assignment */
+			data->pwm_acz[ix] = PWM_ACZ_FROM_REG(
+							data->pwm_config[ix]);
+			/* Save the current ramp rate state and disable it */
+			data->pwm_rr[ix > 0] = dme1737_read(data,
+						DME1737_REG_PWM_RR(ix > 0));
+			data->pwm_rr_en &= ~(1 << ix);
+			if (PWM_RR_EN_FROM_REG(data->pwm_rr[ix > 0], ix)) {
+				data->pwm_rr_en |= (1 << ix);
+				data->pwm_rr[ix > 0] = PWM_RR_EN_TO_REG(0, ix,
+							data->pwm_rr[ix > 0]);
+				dme1737_write(data,
+					      DME1737_REG_PWM_RR(ix > 0),
+					      data->pwm_rr[ix > 0]);
+			}
+		}
+		/* Set the new PWM mode */
+		switch (val) {
+		case 0:
+			/* Change permissions of pwm[ix] to read-only */
+			dme1737_chmod_file(dev, dme1737_pwm_chmod_attr[ix],
+					   S_IRUGO);
+			/* Turn fan fully on */
+			data->pwm_config[ix] = PWM_EN_TO_REG(0,
+							data->pwm_config[ix]);
+			dme1737_write(data, DME1737_REG_PWM_CONFIG(ix),
+				      data->pwm_config[ix]);
+			break;
+		case 1:
+			/* Turn on manual mode */
+			data->pwm_config[ix] = PWM_EN_TO_REG(1,
+							data->pwm_config[ix]);
+			dme1737_write(data, DME1737_REG_PWM_CONFIG(ix),
+				      data->pwm_config[ix]);
+			/* Change permissions of pwm[ix] to read-writeable */
+			dme1737_chmod_file(dev, dme1737_pwm_chmod_attr[ix],
+					   S_IRUGO | S_IWUSR);
+			break;
+		case 2:
+			/* Change permissions of pwm[ix] to read-only */
+			dme1737_chmod_file(dev, dme1737_pwm_chmod_attr[ix],
+					   S_IRUGO);
+			/*
+			 * Turn on auto mode using the saved zone channel
+			 * assignment
+			 */
+			data->pwm_config[ix] = PWM_ACZ_TO_REG(
+							data->pwm_acz[ix],
+							data->pwm_config[ix]);
+			dme1737_write(data, DME1737_REG_PWM_CONFIG(ix),
+				      data->pwm_config[ix]);
+			/* Enable PWM ramp rate if previously enabled */
+			if (data->pwm_rr_en & (1 << ix)) {
+				data->pwm_rr[ix > 0] = PWM_RR_EN_TO_REG(1, ix,
+						dme1737_read(data,
+						DME1737_REG_PWM_RR(ix > 0)));
+				dme1737_write(data,
+					      DME1737_REG_PWM_RR(ix > 0),
+					      data->pwm_rr[ix > 0]);
+			}
+			break;
+		}
+		break;
+	case SYS_PWM_RAMP_RATE:
+		/* Only valid for pwm[1-3] */
+		/* Refresh the cache */
+		data->pwm_config[ix] = dme1737_read(data,
+						DME1737_REG_PWM_CONFIG(ix));
+		data->pwm_rr[ix > 0] = dme1737_read(data,
+						DME1737_REG_PWM_RR(ix > 0));
+		/* Set the ramp rate value */
+		if (val > 0) {
+			data->pwm_rr[ix > 0] = PWM_RR_TO_REG(val, ix,
+							data->pwm_rr[ix > 0]);
+		}
+		/*
+		 * Enable/disable the feature only if the associated PWM
+		 * output is in automatic mode.
+		 */
+		if (PWM_EN_FROM_REG(data->pwm_config[ix]) == 2) {
+			data->pwm_rr[ix > 0] = PWM_RR_EN_TO_REG(val > 0, ix,
+							data->pwm_rr[ix > 0]);
+		}
+		dme1737_write(data, DME1737_REG_PWM_RR(ix > 0),
+			      data->pwm_rr[ix > 0]);
+		break;
+	case SYS_PWM_AUTO_CHANNELS_ZONE:
+		/* Only valid for pwm[1-3] */
+		if (!(val == 1 || val == 2 || val == 4 ||
+		      val == 6 || val == 7)) {
+			count = -EINVAL;
+			dev_warn(dev,
+				 "PWM auto channels zone %ld not supported. Choose one of 1, 2, 4, 6, "
+				 "or 7.\n", val);
+			goto exit;
+		}
+		/* Refresh the cache */
+		data->pwm_config[ix] = dme1737_read(data,
+						DME1737_REG_PWM_CONFIG(ix));
+		if (PWM_EN_FROM_REG(data->pwm_config[ix]) == 2) {
+			/*
+			 * PWM is already in auto mode so update the temp
+			 * channel assignment
+			 */
+			data->pwm_config[ix] = PWM_ACZ_TO_REG(val,
+						data->pwm_config[ix]);
+			dme1737_write(data, DME1737_REG_PWM_CONFIG(ix),
+				      data->pwm_config[ix]);
+		} else {
+			/*
+			 * PWM is not in auto mode so we save the temp
+			 * channel assignment for later use
+			 */
+			data->pwm_acz[ix] = val;
+		}
+		break;
+	case SYS_PWM_AUTO_PWM_MIN:
+		/* Only valid for pwm[1-3] */
+		/* Refresh the cache */
+		data->pwm_min[ix] = dme1737_read(data,
+						DME1737_REG_PWM_MIN(ix));
+		/*
+		 * There are only 2 values supported for the auto_pwm_min
+		 * value: 0 or auto_point1_pwm. So if the temperature drops
+		 * below the auto_point1_temp_hyst value, the fan either turns
+		 * off or runs at auto_point1_pwm duty-cycle.
+		 */
+		if (val > ((data->pwm_min[ix] + 1) / 2)) {
+			data->pwm_rr[0] = PWM_OFF_TO_REG(1, ix,
+						dme1737_read(data,
+						DME1737_REG_PWM_RR(0)));
+		} else {
+			data->pwm_rr[0] = PWM_OFF_TO_REG(0, ix,
+						dme1737_read(data,
+						DME1737_REG_PWM_RR(0)));
+		}
+		dme1737_write(data, DME1737_REG_PWM_RR(0),
+			      data->pwm_rr[0]);
+		break;
+	case SYS_PWM_AUTO_POINT1_PWM:
+		/* Only valid for pwm[1-3] */
+		data->pwm_min[ix] = clamp_val(val, 0, 255);
+		dme1737_write(data, DME1737_REG_PWM_MIN(ix),
+			      data->pwm_min[ix]);
+		break;
+	default:
+		dev_dbg(dev, "Unknown function %d.\n", fn);
+	}
+exit:
+	mutex_unlock(&data->update_lock);
+
+	return count;
+}
+
+/* ---------------------------------------------------------------------
+ * Miscellaneous sysfs attributes
+ * --------------------------------------------------------------------- */
+
+static ssize_t vrm_show(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct dme1737_data *data = i2c_get_clientdata(client);
+
+	return sprintf(buf, "%d\n", data->vrm);
+}
+
+static ssize_t vrm_store(struct device *dev, struct device_attribute *attr,
+			 const char *buf, size_t count)
+{
+	struct dme1737_data *data = dev_get_drvdata(dev);
+	unsigned long val;
+	int err;
+
+	err = kstrtoul(buf, 10, &val);
+	if (err)
+		return err;
+
+	if (val > 255)
+		return -EINVAL;
+
+	data->vrm = val;
+	return count;
+}
+
+static ssize_t cpu0_vid_show(struct device *dev,
+			     struct device_attribute *attr, char *buf)
+{
+	struct dme1737_data *data = dme1737_update_device(dev);
+
+	return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm));
+}
+
+static ssize_t name_show(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	struct dme1737_data *data = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%s\n", data->name);
+}
+
+/* ---------------------------------------------------------------------
+ * Sysfs device attribute defines and structs
+ * --------------------------------------------------------------------- */
+
+/* Voltages 0-7 */
+
+#define SENSOR_DEVICE_ATTR_IN(ix) \
+static SENSOR_DEVICE_ATTR_2(in##ix##_input, S_IRUGO, \
+	show_in, NULL, SYS_IN_INPUT, ix); \
+static SENSOR_DEVICE_ATTR_2(in##ix##_min, S_IRUGO | S_IWUSR, \
+	show_in, set_in, SYS_IN_MIN, ix); \
+static SENSOR_DEVICE_ATTR_2(in##ix##_max, S_IRUGO | S_IWUSR, \
+	show_in, set_in, SYS_IN_MAX, ix); \
+static SENSOR_DEVICE_ATTR_2(in##ix##_alarm, S_IRUGO, \
+	show_in, NULL, SYS_IN_ALARM, ix)
+
+SENSOR_DEVICE_ATTR_IN(0);
+SENSOR_DEVICE_ATTR_IN(1);
+SENSOR_DEVICE_ATTR_IN(2);
+SENSOR_DEVICE_ATTR_IN(3);
+SENSOR_DEVICE_ATTR_IN(4);
+SENSOR_DEVICE_ATTR_IN(5);
+SENSOR_DEVICE_ATTR_IN(6);
+SENSOR_DEVICE_ATTR_IN(7);
+
+/* Temperatures 1-3 */
+
+#define SENSOR_DEVICE_ATTR_TEMP(ix) \
+static SENSOR_DEVICE_ATTR_2(temp##ix##_input, S_IRUGO, \
+	show_temp, NULL, SYS_TEMP_INPUT, ix-1); \
+static SENSOR_DEVICE_ATTR_2(temp##ix##_min, S_IRUGO | S_IWUSR, \
+	show_temp, set_temp, SYS_TEMP_MIN, ix-1); \
+static SENSOR_DEVICE_ATTR_2(temp##ix##_max, S_IRUGO | S_IWUSR, \
+	show_temp, set_temp, SYS_TEMP_MAX, ix-1); \
+static SENSOR_DEVICE_ATTR_2(temp##ix##_offset, S_IRUGO, \
+	show_temp, set_temp, SYS_TEMP_OFFSET, ix-1); \
+static SENSOR_DEVICE_ATTR_2(temp##ix##_alarm, S_IRUGO, \
+	show_temp, NULL, SYS_TEMP_ALARM, ix-1); \
+static SENSOR_DEVICE_ATTR_2(temp##ix##_fault, S_IRUGO, \
+	show_temp, NULL, SYS_TEMP_FAULT, ix-1)
+
+SENSOR_DEVICE_ATTR_TEMP(1);
+SENSOR_DEVICE_ATTR_TEMP(2);
+SENSOR_DEVICE_ATTR_TEMP(3);
+
+/* Zones 1-3 */
+
+#define SENSOR_DEVICE_ATTR_ZONE(ix) \
+static SENSOR_DEVICE_ATTR_2(zone##ix##_auto_channels_temp, S_IRUGO, \
+	show_zone, NULL, SYS_ZONE_AUTO_CHANNELS_TEMP, ix-1); \
+static SENSOR_DEVICE_ATTR_2(zone##ix##_auto_point1_temp_hyst, S_IRUGO, \
+	show_zone, set_zone, SYS_ZONE_AUTO_POINT1_TEMP_HYST, ix-1); \
+static SENSOR_DEVICE_ATTR_2(zone##ix##_auto_point1_temp, S_IRUGO, \
+	show_zone, set_zone, SYS_ZONE_AUTO_POINT1_TEMP, ix-1); \
+static SENSOR_DEVICE_ATTR_2(zone##ix##_auto_point2_temp, S_IRUGO, \
+	show_zone, set_zone, SYS_ZONE_AUTO_POINT2_TEMP, ix-1); \
+static SENSOR_DEVICE_ATTR_2(zone##ix##_auto_point3_temp, S_IRUGO, \
+	show_zone, set_zone, SYS_ZONE_AUTO_POINT3_TEMP, ix-1)
+
+SENSOR_DEVICE_ATTR_ZONE(1);
+SENSOR_DEVICE_ATTR_ZONE(2);
+SENSOR_DEVICE_ATTR_ZONE(3);
+
+/* Fans 1-4 */
+
+#define SENSOR_DEVICE_ATTR_FAN_1TO4(ix) \
+static SENSOR_DEVICE_ATTR_2(fan##ix##_input, S_IRUGO, \
+	show_fan, NULL, SYS_FAN_INPUT, ix-1); \
+static SENSOR_DEVICE_ATTR_2(fan##ix##_min, S_IRUGO | S_IWUSR, \
+	show_fan, set_fan, SYS_FAN_MIN, ix-1); \
+static SENSOR_DEVICE_ATTR_2(fan##ix##_alarm, S_IRUGO, \
+	show_fan, NULL, SYS_FAN_ALARM, ix-1); \
+static SENSOR_DEVICE_ATTR_2(fan##ix##_type, S_IRUGO | S_IWUSR, \
+	show_fan, set_fan, SYS_FAN_TYPE, ix-1)
+
+SENSOR_DEVICE_ATTR_FAN_1TO4(1);
+SENSOR_DEVICE_ATTR_FAN_1TO4(2);
+SENSOR_DEVICE_ATTR_FAN_1TO4(3);
+SENSOR_DEVICE_ATTR_FAN_1TO4(4);
+
+/* Fans 5-6 */
+
+#define SENSOR_DEVICE_ATTR_FAN_5TO6(ix) \
+static SENSOR_DEVICE_ATTR_2(fan##ix##_input, S_IRUGO, \
+	show_fan, NULL, SYS_FAN_INPUT, ix-1); \
+static SENSOR_DEVICE_ATTR_2(fan##ix##_min, S_IRUGO | S_IWUSR, \
+	show_fan, set_fan, SYS_FAN_MIN, ix-1); \
+static SENSOR_DEVICE_ATTR_2(fan##ix##_alarm, S_IRUGO, \
+	show_fan, NULL, SYS_FAN_ALARM, ix-1); \
+static SENSOR_DEVICE_ATTR_2(fan##ix##_max, S_IRUGO | S_IWUSR, \
+	show_fan, set_fan, SYS_FAN_MAX, ix-1)
+
+SENSOR_DEVICE_ATTR_FAN_5TO6(5);
+SENSOR_DEVICE_ATTR_FAN_5TO6(6);
+
+/* PWMs 1-3 */
+
+#define SENSOR_DEVICE_ATTR_PWM_1TO3(ix) \
+static SENSOR_DEVICE_ATTR_2(pwm##ix, S_IRUGO, \
+	show_pwm, set_pwm, SYS_PWM, ix-1); \
+static SENSOR_DEVICE_ATTR_2(pwm##ix##_freq, S_IRUGO, \
+	show_pwm, set_pwm, SYS_PWM_FREQ, ix-1); \
+static SENSOR_DEVICE_ATTR_2(pwm##ix##_enable, S_IRUGO, \
+	show_pwm, set_pwm, SYS_PWM_ENABLE, ix-1); \
+static SENSOR_DEVICE_ATTR_2(pwm##ix##_ramp_rate, S_IRUGO, \
+	show_pwm, set_pwm, SYS_PWM_RAMP_RATE, ix-1); \
+static SENSOR_DEVICE_ATTR_2(pwm##ix##_auto_channels_zone, S_IRUGO, \
+	show_pwm, set_pwm, SYS_PWM_AUTO_CHANNELS_ZONE, ix-1); \
+static SENSOR_DEVICE_ATTR_2(pwm##ix##_auto_pwm_min, S_IRUGO, \
+	show_pwm, set_pwm, SYS_PWM_AUTO_PWM_MIN, ix-1); \
+static SENSOR_DEVICE_ATTR_2(pwm##ix##_auto_point1_pwm, S_IRUGO, \
+	show_pwm, set_pwm, SYS_PWM_AUTO_POINT1_PWM, ix-1); \
+static SENSOR_DEVICE_ATTR_2(pwm##ix##_auto_point2_pwm, S_IRUGO, \
+	show_pwm, NULL, SYS_PWM_AUTO_POINT2_PWM, ix-1)
+
+SENSOR_DEVICE_ATTR_PWM_1TO3(1);
+SENSOR_DEVICE_ATTR_PWM_1TO3(2);
+SENSOR_DEVICE_ATTR_PWM_1TO3(3);
+
+/* PWMs 5-6 */
+
+#define SENSOR_DEVICE_ATTR_PWM_5TO6(ix) \
+static SENSOR_DEVICE_ATTR_2(pwm##ix, S_IRUGO, \
+	show_pwm, set_pwm, SYS_PWM, ix-1); \
+static SENSOR_DEVICE_ATTR_2(pwm##ix##_freq, S_IRUGO, \
+	show_pwm, set_pwm, SYS_PWM_FREQ, ix-1); \
+static SENSOR_DEVICE_ATTR_2(pwm##ix##_enable, S_IRUGO, \
+	show_pwm, NULL, SYS_PWM_ENABLE, ix-1)
+
+SENSOR_DEVICE_ATTR_PWM_5TO6(5);
+SENSOR_DEVICE_ATTR_PWM_5TO6(6);
+
+/* Misc */
+
+static DEVICE_ATTR_RW(vrm);
+static DEVICE_ATTR_RO(cpu0_vid);
+static DEVICE_ATTR_RO(name);   /* for ISA devices */
+
+/*
+ * This struct holds all the attributes that are always present and need to be
+ * created unconditionally. The attributes that need modification of their
+ * permissions are created read-only and write permissions are added or removed
+ * on the fly when required
+ */
+static struct attribute *dme1737_attr[] = {
+	/* Voltages */
+	&sensor_dev_attr_in0_input.dev_attr.attr,
+	&sensor_dev_attr_in0_min.dev_attr.attr,
+	&sensor_dev_attr_in0_max.dev_attr.attr,
+	&sensor_dev_attr_in0_alarm.dev_attr.attr,
+	&sensor_dev_attr_in1_input.dev_attr.attr,
+	&sensor_dev_attr_in1_min.dev_attr.attr,
+	&sensor_dev_attr_in1_max.dev_attr.attr,
+	&sensor_dev_attr_in1_alarm.dev_attr.attr,
+	&sensor_dev_attr_in2_input.dev_attr.attr,
+	&sensor_dev_attr_in2_min.dev_attr.attr,
+	&sensor_dev_attr_in2_max.dev_attr.attr,
+	&sensor_dev_attr_in2_alarm.dev_attr.attr,
+	&sensor_dev_attr_in3_input.dev_attr.attr,
+	&sensor_dev_attr_in3_min.dev_attr.attr,
+	&sensor_dev_attr_in3_max.dev_attr.attr,
+	&sensor_dev_attr_in3_alarm.dev_attr.attr,
+	&sensor_dev_attr_in4_input.dev_attr.attr,
+	&sensor_dev_attr_in4_min.dev_attr.attr,
+	&sensor_dev_attr_in4_max.dev_attr.attr,
+	&sensor_dev_attr_in4_alarm.dev_attr.attr,
+	&sensor_dev_attr_in5_input.dev_attr.attr,
+	&sensor_dev_attr_in5_min.dev_attr.attr,
+	&sensor_dev_attr_in5_max.dev_attr.attr,
+	&sensor_dev_attr_in5_alarm.dev_attr.attr,
+	&sensor_dev_attr_in6_input.dev_attr.attr,
+	&sensor_dev_attr_in6_min.dev_attr.attr,
+	&sensor_dev_attr_in6_max.dev_attr.attr,
+	&sensor_dev_attr_in6_alarm.dev_attr.attr,
+	/* Temperatures */
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_min.dev_attr.attr,
+	&sensor_dev_attr_temp1_max.dev_attr.attr,
+	&sensor_dev_attr_temp1_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp1_fault.dev_attr.attr,
+	&sensor_dev_attr_temp2_input.dev_attr.attr,
+	&sensor_dev_attr_temp2_min.dev_attr.attr,
+	&sensor_dev_attr_temp2_max.dev_attr.attr,
+	&sensor_dev_attr_temp2_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp2_fault.dev_attr.attr,
+	&sensor_dev_attr_temp3_input.dev_attr.attr,
+	&sensor_dev_attr_temp3_min.dev_attr.attr,
+	&sensor_dev_attr_temp3_max.dev_attr.attr,
+	&sensor_dev_attr_temp3_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp3_fault.dev_attr.attr,
+	/* Zones */
+	&sensor_dev_attr_zone1_auto_point1_temp.dev_attr.attr,
+	&sensor_dev_attr_zone1_auto_point2_temp.dev_attr.attr,
+	&sensor_dev_attr_zone1_auto_point3_temp.dev_attr.attr,
+	&sensor_dev_attr_zone1_auto_channels_temp.dev_attr.attr,
+	&sensor_dev_attr_zone2_auto_point1_temp.dev_attr.attr,
+	&sensor_dev_attr_zone2_auto_point2_temp.dev_attr.attr,
+	&sensor_dev_attr_zone2_auto_point3_temp.dev_attr.attr,
+	&sensor_dev_attr_zone2_auto_channels_temp.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group dme1737_group = {
+	.attrs = dme1737_attr,
+};
+
+/*
+ * The following struct holds temp offset attributes, which are not available
+ * in all chips. The following chips support them:
+ * DME1737, SCH311x
+ */
+static struct attribute *dme1737_temp_offset_attr[] = {
+	&sensor_dev_attr_temp1_offset.dev_attr.attr,
+	&sensor_dev_attr_temp2_offset.dev_attr.attr,
+	&sensor_dev_attr_temp3_offset.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group dme1737_temp_offset_group = {
+	.attrs = dme1737_temp_offset_attr,
+};
+
+/*
+ * The following struct holds VID related attributes, which are not available
+ * in all chips. The following chips support them:
+ * DME1737
+ */
+static struct attribute *dme1737_vid_attr[] = {
+	&dev_attr_vrm.attr,
+	&dev_attr_cpu0_vid.attr,
+	NULL
+};
+
+static const struct attribute_group dme1737_vid_group = {
+	.attrs = dme1737_vid_attr,
+};
+
+/*
+ * The following struct holds temp zone 3 related attributes, which are not
+ * available in all chips. The following chips support them:
+ * DME1737, SCH311x, SCH5027
+ */
+static struct attribute *dme1737_zone3_attr[] = {
+	&sensor_dev_attr_zone3_auto_point1_temp.dev_attr.attr,
+	&sensor_dev_attr_zone3_auto_point2_temp.dev_attr.attr,
+	&sensor_dev_attr_zone3_auto_point3_temp.dev_attr.attr,
+	&sensor_dev_attr_zone3_auto_channels_temp.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group dme1737_zone3_group = {
+	.attrs = dme1737_zone3_attr,
+};
+
+
+/*
+ * The following struct holds temp zone hysteresis related attributes, which
+ * are not available in all chips. The following chips support them:
+ * DME1737, SCH311x
+ */
+static struct attribute *dme1737_zone_hyst_attr[] = {
+	&sensor_dev_attr_zone1_auto_point1_temp_hyst.dev_attr.attr,
+	&sensor_dev_attr_zone2_auto_point1_temp_hyst.dev_attr.attr,
+	&sensor_dev_attr_zone3_auto_point1_temp_hyst.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group dme1737_zone_hyst_group = {
+	.attrs = dme1737_zone_hyst_attr,
+};
+
+/*
+ * The following struct holds voltage in7 related attributes, which
+ * are not available in all chips. The following chips support them:
+ * SCH5127
+ */
+static struct attribute *dme1737_in7_attr[] = {
+	&sensor_dev_attr_in7_input.dev_attr.attr,
+	&sensor_dev_attr_in7_min.dev_attr.attr,
+	&sensor_dev_attr_in7_max.dev_attr.attr,
+	&sensor_dev_attr_in7_alarm.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group dme1737_in7_group = {
+	.attrs = dme1737_in7_attr,
+};
+
+/*
+ * The following structs hold the PWM attributes, some of which are optional.
+ * Their creation depends on the chip configuration which is determined during
+ * module load.
+ */
+static struct attribute *dme1737_pwm1_attr[] = {
+	&sensor_dev_attr_pwm1.dev_attr.attr,
+	&sensor_dev_attr_pwm1_freq.dev_attr.attr,
+	&sensor_dev_attr_pwm1_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm1_ramp_rate.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_channels_zone.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
+	NULL
+};
+static struct attribute *dme1737_pwm2_attr[] = {
+	&sensor_dev_attr_pwm2.dev_attr.attr,
+	&sensor_dev_attr_pwm2_freq.dev_attr.attr,
+	&sensor_dev_attr_pwm2_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm2_ramp_rate.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_channels_zone.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
+	NULL
+};
+static struct attribute *dme1737_pwm3_attr[] = {
+	&sensor_dev_attr_pwm3.dev_attr.attr,
+	&sensor_dev_attr_pwm3_freq.dev_attr.attr,
+	&sensor_dev_attr_pwm3_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm3_ramp_rate.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_channels_zone.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr,
+	NULL
+};
+static struct attribute *dme1737_pwm5_attr[] = {
+	&sensor_dev_attr_pwm5.dev_attr.attr,
+	&sensor_dev_attr_pwm5_freq.dev_attr.attr,
+	&sensor_dev_attr_pwm5_enable.dev_attr.attr,
+	NULL
+};
+static struct attribute *dme1737_pwm6_attr[] = {
+	&sensor_dev_attr_pwm6.dev_attr.attr,
+	&sensor_dev_attr_pwm6_freq.dev_attr.attr,
+	&sensor_dev_attr_pwm6_enable.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group dme1737_pwm_group[] = {
+	{ .attrs = dme1737_pwm1_attr },
+	{ .attrs = dme1737_pwm2_attr },
+	{ .attrs = dme1737_pwm3_attr },
+	{ .attrs = NULL },
+	{ .attrs = dme1737_pwm5_attr },
+	{ .attrs = dme1737_pwm6_attr },
+};
+
+/*
+ * The following struct holds auto PWM min attributes, which are not available
+ * in all chips. Their creation depends on the chip type which is determined
+ * during module load.
+ */
+static struct attribute *dme1737_auto_pwm_min_attr[] = {
+	&sensor_dev_attr_pwm1_auto_pwm_min.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_pwm_min.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_pwm_min.dev_attr.attr,
+};
+
+/*
+ * The following structs hold the fan attributes, some of which are optional.
+ * Their creation depends on the chip configuration which is determined during
+ * module load.
+ */
+static struct attribute *dme1737_fan1_attr[] = {
+	&sensor_dev_attr_fan1_input.dev_attr.attr,
+	&sensor_dev_attr_fan1_min.dev_attr.attr,
+	&sensor_dev_attr_fan1_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan1_type.dev_attr.attr,
+	NULL
+};
+static struct attribute *dme1737_fan2_attr[] = {
+	&sensor_dev_attr_fan2_input.dev_attr.attr,
+	&sensor_dev_attr_fan2_min.dev_attr.attr,
+	&sensor_dev_attr_fan2_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan2_type.dev_attr.attr,
+	NULL
+};
+static struct attribute *dme1737_fan3_attr[] = {
+	&sensor_dev_attr_fan3_input.dev_attr.attr,
+	&sensor_dev_attr_fan3_min.dev_attr.attr,
+	&sensor_dev_attr_fan3_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan3_type.dev_attr.attr,
+	NULL
+};
+static struct attribute *dme1737_fan4_attr[] = {
+	&sensor_dev_attr_fan4_input.dev_attr.attr,
+	&sensor_dev_attr_fan4_min.dev_attr.attr,
+	&sensor_dev_attr_fan4_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan4_type.dev_attr.attr,
+	NULL
+};
+static struct attribute *dme1737_fan5_attr[] = {
+	&sensor_dev_attr_fan5_input.dev_attr.attr,
+	&sensor_dev_attr_fan5_min.dev_attr.attr,
+	&sensor_dev_attr_fan5_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan5_max.dev_attr.attr,
+	NULL
+};
+static struct attribute *dme1737_fan6_attr[] = {
+	&sensor_dev_attr_fan6_input.dev_attr.attr,
+	&sensor_dev_attr_fan6_min.dev_attr.attr,
+	&sensor_dev_attr_fan6_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan6_max.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group dme1737_fan_group[] = {
+	{ .attrs = dme1737_fan1_attr },
+	{ .attrs = dme1737_fan2_attr },
+	{ .attrs = dme1737_fan3_attr },
+	{ .attrs = dme1737_fan4_attr },
+	{ .attrs = dme1737_fan5_attr },
+	{ .attrs = dme1737_fan6_attr },
+};
+
+/*
+ * The permissions of the following zone attributes are changed to read-
+ * writeable if the chip is *not* locked. Otherwise they stay read-only.
+ */
+static struct attribute *dme1737_zone_chmod_attr[] = {
+	&sensor_dev_attr_zone1_auto_point1_temp.dev_attr.attr,
+	&sensor_dev_attr_zone1_auto_point2_temp.dev_attr.attr,
+	&sensor_dev_attr_zone1_auto_point3_temp.dev_attr.attr,
+	&sensor_dev_attr_zone2_auto_point1_temp.dev_attr.attr,
+	&sensor_dev_attr_zone2_auto_point2_temp.dev_attr.attr,
+	&sensor_dev_attr_zone2_auto_point3_temp.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group dme1737_zone_chmod_group = {
+	.attrs = dme1737_zone_chmod_attr,
+};
+
+
+/*
+ * The permissions of the following zone 3 attributes are changed to read-
+ * writeable if the chip is *not* locked. Otherwise they stay read-only.
+ */
+static struct attribute *dme1737_zone3_chmod_attr[] = {
+	&sensor_dev_attr_zone3_auto_point1_temp.dev_attr.attr,
+	&sensor_dev_attr_zone3_auto_point2_temp.dev_attr.attr,
+	&sensor_dev_attr_zone3_auto_point3_temp.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group dme1737_zone3_chmod_group = {
+	.attrs = dme1737_zone3_chmod_attr,
+};
+
+/*
+ * The permissions of the following PWM attributes are changed to read-
+ * writeable if the chip is *not* locked and the respective PWM is available.
+ * Otherwise they stay read-only.
+ */
+static struct attribute *dme1737_pwm1_chmod_attr[] = {
+	&sensor_dev_attr_pwm1_freq.dev_attr.attr,
+	&sensor_dev_attr_pwm1_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm1_ramp_rate.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_channels_zone.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
+	NULL
+};
+static struct attribute *dme1737_pwm2_chmod_attr[] = {
+	&sensor_dev_attr_pwm2_freq.dev_attr.attr,
+	&sensor_dev_attr_pwm2_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm2_ramp_rate.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_channels_zone.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
+	NULL
+};
+static struct attribute *dme1737_pwm3_chmod_attr[] = {
+	&sensor_dev_attr_pwm3_freq.dev_attr.attr,
+	&sensor_dev_attr_pwm3_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm3_ramp_rate.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_channels_zone.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
+	NULL
+};
+static struct attribute *dme1737_pwm5_chmod_attr[] = {
+	&sensor_dev_attr_pwm5.dev_attr.attr,
+	&sensor_dev_attr_pwm5_freq.dev_attr.attr,
+	NULL
+};
+static struct attribute *dme1737_pwm6_chmod_attr[] = {
+	&sensor_dev_attr_pwm6.dev_attr.attr,
+	&sensor_dev_attr_pwm6_freq.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group dme1737_pwm_chmod_group[] = {
+	{ .attrs = dme1737_pwm1_chmod_attr },
+	{ .attrs = dme1737_pwm2_chmod_attr },
+	{ .attrs = dme1737_pwm3_chmod_attr },
+	{ .attrs = NULL },
+	{ .attrs = dme1737_pwm5_chmod_attr },
+	{ .attrs = dme1737_pwm6_chmod_attr },
+};
+
+/*
+ * Pwm[1-3] are read-writeable if the associated pwm is in manual mode and the
+ * chip is not locked. Otherwise they are read-only.
+ */
+static struct attribute *dme1737_pwm_chmod_attr[] = {
+	&sensor_dev_attr_pwm1.dev_attr.attr,
+	&sensor_dev_attr_pwm2.dev_attr.attr,
+	&sensor_dev_attr_pwm3.dev_attr.attr,
+};
+
+/* ---------------------------------------------------------------------
+ * Super-IO functions
+ * --------------------------------------------------------------------- */
+
+static inline void dme1737_sio_enter(int sio_cip)
+{
+	outb(0x55, sio_cip);
+}
+
+static inline void dme1737_sio_exit(int sio_cip)
+{
+	outb(0xaa, sio_cip);
+}
+
+static inline int dme1737_sio_inb(int sio_cip, int reg)
+{
+	outb(reg, sio_cip);
+	return inb(sio_cip + 1);
+}
+
+static inline void dme1737_sio_outb(int sio_cip, int reg, int val)
+{
+	outb(reg, sio_cip);
+	outb(val, sio_cip + 1);
+}
+
+/* ---------------------------------------------------------------------
+ * Device initialization
+ * --------------------------------------------------------------------- */
+
+static int dme1737_i2c_get_features(int, struct dme1737_data*);
+
+static void dme1737_chmod_file(struct device *dev,
+			       struct attribute *attr, umode_t mode)
+{
+	if (sysfs_chmod_file(&dev->kobj, attr, mode)) {
+		dev_warn(dev, "Failed to change permissions of %s.\n",
+			 attr->name);
+	}
+}
+
+static void dme1737_chmod_group(struct device *dev,
+				const struct attribute_group *group,
+				umode_t mode)
+{
+	struct attribute **attr;
+
+	for (attr = group->attrs; *attr; attr++)
+		dme1737_chmod_file(dev, *attr, mode);
+}
+
+static void dme1737_remove_files(struct device *dev)
+{
+	struct dme1737_data *data = dev_get_drvdata(dev);
+	int ix;
+
+	for (ix = 0; ix < ARRAY_SIZE(dme1737_fan_group); ix++) {
+		if (data->has_features & HAS_FAN(ix)) {
+			sysfs_remove_group(&dev->kobj,
+					   &dme1737_fan_group[ix]);
+		}
+	}
+
+	for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_group); ix++) {
+		if (data->has_features & HAS_PWM(ix)) {
+			sysfs_remove_group(&dev->kobj,
+					   &dme1737_pwm_group[ix]);
+			if ((data->has_features & HAS_PWM_MIN) && ix < 3) {
+				sysfs_remove_file(&dev->kobj,
+						dme1737_auto_pwm_min_attr[ix]);
+			}
+		}
+	}
+
+	if (data->has_features & HAS_TEMP_OFFSET)
+		sysfs_remove_group(&dev->kobj, &dme1737_temp_offset_group);
+	if (data->has_features & HAS_VID)
+		sysfs_remove_group(&dev->kobj, &dme1737_vid_group);
+	if (data->has_features & HAS_ZONE3)
+		sysfs_remove_group(&dev->kobj, &dme1737_zone3_group);
+	if (data->has_features & HAS_ZONE_HYST)
+		sysfs_remove_group(&dev->kobj, &dme1737_zone_hyst_group);
+	if (data->has_features & HAS_IN7)
+		sysfs_remove_group(&dev->kobj, &dme1737_in7_group);
+	sysfs_remove_group(&dev->kobj, &dme1737_group);
+
+	if (!data->client)
+		sysfs_remove_file(&dev->kobj, &dev_attr_name.attr);
+}
+
+static int dme1737_create_files(struct device *dev)
+{
+	struct dme1737_data *data = dev_get_drvdata(dev);
+	int err, ix;
+
+	/* Create a name attribute for ISA devices */
+	if (!data->client) {
+		err = sysfs_create_file(&dev->kobj, &dev_attr_name.attr);
+		if (err)
+			goto exit;
+	}
+
+	/* Create standard sysfs attributes */
+	err = sysfs_create_group(&dev->kobj, &dme1737_group);
+	if (err)
+		goto exit_remove;
+
+	/* Create chip-dependent sysfs attributes */
+	if (data->has_features & HAS_TEMP_OFFSET) {
+		err = sysfs_create_group(&dev->kobj,
+					 &dme1737_temp_offset_group);
+		if (err)
+			goto exit_remove;
+	}
+	if (data->has_features & HAS_VID) {
+		err = sysfs_create_group(&dev->kobj, &dme1737_vid_group);
+		if (err)
+			goto exit_remove;
+	}
+	if (data->has_features & HAS_ZONE3) {
+		err = sysfs_create_group(&dev->kobj, &dme1737_zone3_group);
+		if (err)
+			goto exit_remove;
+	}
+	if (data->has_features & HAS_ZONE_HYST) {
+		err = sysfs_create_group(&dev->kobj, &dme1737_zone_hyst_group);
+		if (err)
+			goto exit_remove;
+	}
+	if (data->has_features & HAS_IN7) {
+		err = sysfs_create_group(&dev->kobj, &dme1737_in7_group);
+		if (err)
+			goto exit_remove;
+	}
+
+	/* Create fan sysfs attributes */
+	for (ix = 0; ix < ARRAY_SIZE(dme1737_fan_group); ix++) {
+		if (data->has_features & HAS_FAN(ix)) {
+			err = sysfs_create_group(&dev->kobj,
+						 &dme1737_fan_group[ix]);
+			if (err)
+				goto exit_remove;
+		}
+	}
+
+	/* Create PWM sysfs attributes */
+	for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_group); ix++) {
+		if (data->has_features & HAS_PWM(ix)) {
+			err = sysfs_create_group(&dev->kobj,
+						 &dme1737_pwm_group[ix]);
+			if (err)
+				goto exit_remove;
+			if ((data->has_features & HAS_PWM_MIN) && (ix < 3)) {
+				err = sysfs_create_file(&dev->kobj,
+						dme1737_auto_pwm_min_attr[ix]);
+				if (err)
+					goto exit_remove;
+			}
+		}
+	}
+
+	/*
+	 * Inform if the device is locked. Otherwise change the permissions of
+	 * selected attributes from read-only to read-writeable.
+	 */
+	if (data->config & 0x02) {
+		dev_info(dev,
+			 "Device is locked. Some attributes will be read-only.\n");
+	} else {
+		/* Change permissions of zone sysfs attributes */
+		dme1737_chmod_group(dev, &dme1737_zone_chmod_group,
+				    S_IRUGO | S_IWUSR);
+
+		/* Change permissions of chip-dependent sysfs attributes */
+		if (data->has_features & HAS_TEMP_OFFSET) {
+			dme1737_chmod_group(dev, &dme1737_temp_offset_group,
+					    S_IRUGO | S_IWUSR);
+		}
+		if (data->has_features & HAS_ZONE3) {
+			dme1737_chmod_group(dev, &dme1737_zone3_chmod_group,
+					    S_IRUGO | S_IWUSR);
+		}
+		if (data->has_features & HAS_ZONE_HYST) {
+			dme1737_chmod_group(dev, &dme1737_zone_hyst_group,
+					    S_IRUGO | S_IWUSR);
+		}
+
+		/* Change permissions of PWM sysfs attributes */
+		for (ix = 0; ix < ARRAY_SIZE(dme1737_pwm_chmod_group); ix++) {
+			if (data->has_features & HAS_PWM(ix)) {
+				dme1737_chmod_group(dev,
+						&dme1737_pwm_chmod_group[ix],
+						S_IRUGO | S_IWUSR);
+				if ((data->has_features & HAS_PWM_MIN) &&
+				    ix < 3) {
+					dme1737_chmod_file(dev,
+						dme1737_auto_pwm_min_attr[ix],
+						S_IRUGO | S_IWUSR);
+				}
+			}
+		}
+
+		/* Change permissions of pwm[1-3] if in manual mode */
+		for (ix = 0; ix < 3; ix++) {
+			if ((data->has_features & HAS_PWM(ix)) &&
+			    (PWM_EN_FROM_REG(data->pwm_config[ix]) == 1)) {
+				dme1737_chmod_file(dev,
+						dme1737_pwm_chmod_attr[ix],
+						S_IRUGO | S_IWUSR);
+			}
+		}
+	}
+
+	return 0;
+
+exit_remove:
+	dme1737_remove_files(dev);
+exit:
+	return err;
+}
+
+static int dme1737_init_device(struct device *dev)
+{
+	struct dme1737_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+	int ix;
+	u8 reg;
+
+	/* Point to the right nominal voltages array */
+	data->in_nominal = IN_NOMINAL(data->type);
+
+	data->config = dme1737_read(data, DME1737_REG_CONFIG);
+	/* Inform if part is not monitoring/started */
+	if (!(data->config & 0x01)) {
+		if (!force_start) {
+			dev_err(dev,
+				"Device is not monitoring. Use the force_start load parameter to override.\n");
+			return -EFAULT;
+		}
+
+		/* Force monitoring */
+		data->config |= 0x01;
+		dme1737_write(data, DME1737_REG_CONFIG, data->config);
+	}
+	/* Inform if part is not ready */
+	if (!(data->config & 0x04)) {
+		dev_err(dev, "Device is not ready.\n");
+		return -EFAULT;
+	}
+
+	/*
+	 * Determine which optional fan and pwm features are enabled (only
+	 * valid for I2C devices)
+	 */
+	if (client) {   /* I2C chip */
+		data->config2 = dme1737_read(data, DME1737_REG_CONFIG2);
+		/* Check if optional fan3 input is enabled */
+		if (data->config2 & 0x04)
+			data->has_features |= HAS_FAN(2);
+
+		/*
+		 * Fan4 and pwm3 are only available if the client's I2C address
+		 * is the default 0x2e. Otherwise the I/Os associated with
+		 * these functions are used for addr enable/select.
+		 */
+		if (client->addr == 0x2e)
+			data->has_features |= HAS_FAN(3) | HAS_PWM(2);
+
+		/*
+		 * Determine which of the optional fan[5-6] and pwm[5-6]
+		 * features are enabled. For this, we need to query the runtime
+		 * registers through the Super-IO LPC interface. Try both
+		 * config ports 0x2e and 0x4e.
+		 */
+		if (dme1737_i2c_get_features(0x2e, data) &&
+		    dme1737_i2c_get_features(0x4e, data)) {
+			dev_warn(dev,
+				 "Failed to query Super-IO for optional features.\n");
+		}
+	}
+
+	/* Fan[1-2] and pwm[1-2] are present in all chips */
+	data->has_features |= HAS_FAN(0) | HAS_FAN(1) | HAS_PWM(0) | HAS_PWM(1);
+
+	/* Chip-dependent features */
+	switch (data->type) {
+	case dme1737:
+		data->has_features |= HAS_TEMP_OFFSET | HAS_VID | HAS_ZONE3 |
+			HAS_ZONE_HYST | HAS_PWM_MIN;
+		break;
+	case sch311x:
+		data->has_features |= HAS_TEMP_OFFSET | HAS_ZONE3 |
+			HAS_ZONE_HYST | HAS_PWM_MIN | HAS_FAN(2) | HAS_PWM(2);
+		break;
+	case sch5027:
+		data->has_features |= HAS_ZONE3;
+		break;
+	case sch5127:
+		data->has_features |= HAS_FAN(2) | HAS_PWM(2) | HAS_IN7;
+		break;
+	default:
+		break;
+	}
+
+	dev_info(dev,
+		 "Optional features: pwm3=%s, pwm5=%s, pwm6=%s, fan3=%s, fan4=%s, fan5=%s, fan6=%s.\n",
+		 (data->has_features & HAS_PWM(2)) ? "yes" : "no",
+		 (data->has_features & HAS_PWM(4)) ? "yes" : "no",
+		 (data->has_features & HAS_PWM(5)) ? "yes" : "no",
+		 (data->has_features & HAS_FAN(2)) ? "yes" : "no",
+		 (data->has_features & HAS_FAN(3)) ? "yes" : "no",
+		 (data->has_features & HAS_FAN(4)) ? "yes" : "no",
+		 (data->has_features & HAS_FAN(5)) ? "yes" : "no");
+
+	reg = dme1737_read(data, DME1737_REG_TACH_PWM);
+	/* Inform if fan-to-pwm mapping differs from the default */
+	if (client && reg != 0xa4) {   /* I2C chip */
+		dev_warn(dev,
+			 "Non-standard fan to pwm mapping: fan1->pwm%d, fan2->pwm%d, fan3->pwm%d, fan4->pwm%d. %s\n",
+			 (reg & 0x03) + 1, ((reg >> 2) & 0x03) + 1,
+			 ((reg >> 4) & 0x03) + 1, ((reg >> 6) & 0x03) + 1,
+			 DO_REPORT);
+	} else if (!client && reg != 0x24) {   /* ISA chip */
+		dev_warn(dev,
+			 "Non-standard fan to pwm mapping: fan1->pwm%d, fan2->pwm%d, fan3->pwm%d. %s\n",
+			 (reg & 0x03) + 1, ((reg >> 2) & 0x03) + 1,
+			 ((reg >> 4) & 0x03) + 1, DO_REPORT);
+	}
+
+	/*
+	 * Switch pwm[1-3] to manual mode if they are currently disabled and
+	 * set the duty-cycles to 0% (which is identical to the PWMs being
+	 * disabled).
+	 */
+	if (!(data->config & 0x02)) {
+		for (ix = 0; ix < 3; ix++) {
+			data->pwm_config[ix] = dme1737_read(data,
+						DME1737_REG_PWM_CONFIG(ix));
+			if ((data->has_features & HAS_PWM(ix)) &&
+			    (PWM_EN_FROM_REG(data->pwm_config[ix]) == -1)) {
+				dev_info(dev,
+					 "Switching pwm%d to manual mode.\n",
+					 ix + 1);
+				data->pwm_config[ix] = PWM_EN_TO_REG(1,
+							data->pwm_config[ix]);
+				dme1737_write(data, DME1737_REG_PWM(ix), 0);
+				dme1737_write(data,
+					      DME1737_REG_PWM_CONFIG(ix),
+					      data->pwm_config[ix]);
+			}
+		}
+	}
+
+	/* Initialize the default PWM auto channels zone (acz) assignments */
+	data->pwm_acz[0] = 1;	/* pwm1 -> zone1 */
+	data->pwm_acz[1] = 2;	/* pwm2 -> zone2 */
+	data->pwm_acz[2] = 4;	/* pwm3 -> zone3 */
+
+	/* Set VRM */
+	if (data->has_features & HAS_VID)
+		data->vrm = vid_which_vrm();
+
+	return 0;
+}
+
+/* ---------------------------------------------------------------------
+ * I2C device detection and registration
+ * --------------------------------------------------------------------- */
+
+static struct i2c_driver dme1737_i2c_driver;
+
+static int dme1737_i2c_get_features(int sio_cip, struct dme1737_data *data)
+{
+	int err = 0, reg;
+	u16 addr;
+
+	dme1737_sio_enter(sio_cip);
+
+	/*
+	 * Check device ID
+	 * We currently know about two kinds of DME1737 and SCH5027.
+	 */
+	reg = force_id ? force_id : dme1737_sio_inb(sio_cip, 0x20);
+	if (!(reg == DME1737_ID_1 || reg == DME1737_ID_2 ||
+	      reg == SCH5027_ID)) {
+		err = -ENODEV;
+		goto exit;
+	}
+
+	/* Select logical device A (runtime registers) */
+	dme1737_sio_outb(sio_cip, 0x07, 0x0a);
+
+	/* Get the base address of the runtime registers */
+	addr = (dme1737_sio_inb(sio_cip, 0x60) << 8) |
+		dme1737_sio_inb(sio_cip, 0x61);
+	if (!addr) {
+		err = -ENODEV;
+		goto exit;
+	}
+
+	/*
+	 * Read the runtime registers to determine which optional features
+	 * are enabled and available. Bits [3:2] of registers 0x43-0x46 are set
+	 * to '10' if the respective feature is enabled.
+	 */
+	if ((inb(addr + 0x43) & 0x0c) == 0x08) /* fan6 */
+		data->has_features |= HAS_FAN(5);
+	if ((inb(addr + 0x44) & 0x0c) == 0x08) /* pwm6 */
+		data->has_features |= HAS_PWM(5);
+	if ((inb(addr + 0x45) & 0x0c) == 0x08) /* fan5 */
+		data->has_features |= HAS_FAN(4);
+	if ((inb(addr + 0x46) & 0x0c) == 0x08) /* pwm5 */
+		data->has_features |= HAS_PWM(4);
+
+exit:
+	dme1737_sio_exit(sio_cip);
+
+	return err;
+}
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int dme1737_i2c_detect(struct i2c_client *client,
+			      struct i2c_board_info *info)
+{
+	struct i2c_adapter *adapter = client->adapter;
+	struct device *dev = &adapter->dev;
+	u8 company, verstep = 0;
+	const char *name;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -ENODEV;
+
+	company = i2c_smbus_read_byte_data(client, DME1737_REG_COMPANY);
+	verstep = i2c_smbus_read_byte_data(client, DME1737_REG_VERSTEP);
+
+	if (company == DME1737_COMPANY_SMSC &&
+	    verstep == SCH5027_VERSTEP) {
+		name = "sch5027";
+	} else if (company == DME1737_COMPANY_SMSC &&
+		   (verstep & DME1737_VERSTEP_MASK) == DME1737_VERSTEP) {
+		name = "dme1737";
+	} else {
+		return -ENODEV;
+	}
+
+	dev_info(dev, "Found a %s chip at 0x%02x (rev 0x%02x).\n",
+		 verstep == SCH5027_VERSTEP ? "SCH5027" : "DME1737",
+		 client->addr, verstep);
+	strscpy(info->type, name, I2C_NAME_SIZE);
+
+	return 0;
+}
+
+static const struct i2c_device_id dme1737_id[];
+
+static int dme1737_i2c_probe(struct i2c_client *client)
+{
+	struct dme1737_data *data;
+	struct device *dev = &client->dev;
+	int err;
+
+	data = devm_kzalloc(dev, sizeof(struct dme1737_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, data);
+	data->type = i2c_match_id(dme1737_id, client)->driver_data;
+	data->client = client;
+	data->name = client->name;
+	mutex_init(&data->update_lock);
+
+	/* Initialize the DME1737 chip */
+	err = dme1737_init_device(dev);
+	if (err) {
+		dev_err(dev, "Failed to initialize device.\n");
+		return err;
+	}
+
+	/* Create sysfs files */
+	err = dme1737_create_files(dev);
+	if (err) {
+		dev_err(dev, "Failed to create sysfs files.\n");
+		return err;
+	}
+
+	/* Register device */
+	data->hwmon_dev = hwmon_device_register(dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		dev_err(dev, "Failed to register device.\n");
+		err = PTR_ERR(data->hwmon_dev);
+		goto exit_remove;
+	}
+
+	return 0;
+
+exit_remove:
+	dme1737_remove_files(dev);
+	return err;
+}
+
+static void dme1737_i2c_remove(struct i2c_client *client)
+{
+	struct dme1737_data *data = i2c_get_clientdata(client);
+
+	hwmon_device_unregister(data->hwmon_dev);
+	dme1737_remove_files(&client->dev);
+}
+
+static const struct i2c_device_id dme1737_id[] = {
+	{ "dme1737", dme1737 },
+	{ "sch5027", sch5027 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, dme1737_id);
+
+static struct i2c_driver dme1737_i2c_driver = {
+	.class = I2C_CLASS_HWMON,
+	.driver = {
+		.name = "dme1737",
+	},
+	.probe_new = dme1737_i2c_probe,
+	.remove = dme1737_i2c_remove,
+	.id_table = dme1737_id,
+	.detect = dme1737_i2c_detect,
+	.address_list = normal_i2c,
+};
+
+/* ---------------------------------------------------------------------
+ * ISA device detection and registration
+ * --------------------------------------------------------------------- */
+
+static int __init dme1737_isa_detect(int sio_cip, unsigned short *addr)
+{
+	int err = 0, reg;
+	unsigned short base_addr;
+
+	dme1737_sio_enter(sio_cip);
+
+	/*
+	 * Check device ID
+	 * We currently know about SCH3112, SCH3114, SCH3116, and SCH5127
+	 */
+	reg = force_id ? force_id : dme1737_sio_inb(sio_cip, 0x20);
+	if (!(reg == SCH3112_ID || reg == SCH3114_ID || reg == SCH3116_ID ||
+	      reg == SCH5127_ID)) {
+		err = -ENODEV;
+		goto exit;
+	}
+
+	/* Select logical device A (runtime registers) */
+	dme1737_sio_outb(sio_cip, 0x07, 0x0a);
+
+	/* Get the base address of the runtime registers */
+	base_addr = (dme1737_sio_inb(sio_cip, 0x60) << 8) |
+		     dme1737_sio_inb(sio_cip, 0x61);
+	if (!base_addr) {
+		pr_err("Base address not set\n");
+		err = -ENODEV;
+		goto exit;
+	}
+
+	/*
+	 * Access to the hwmon registers is through an index/data register
+	 * pair located at offset 0x70/0x71.
+	 */
+	*addr = base_addr + 0x70;
+
+exit:
+	dme1737_sio_exit(sio_cip);
+	return err;
+}
+
+static int __init dme1737_isa_device_add(unsigned short addr)
+{
+	struct resource res = {
+		.start	= addr,
+		.end	= addr + DME1737_EXTENT - 1,
+		.name	= "dme1737",
+		.flags	= IORESOURCE_IO,
+	};
+	int err;
+
+	err = acpi_check_resource_conflict(&res);
+	if (err)
+		goto exit;
+
+	pdev = platform_device_alloc("dme1737", addr);
+	if (!pdev) {
+		pr_err("Failed to allocate device\n");
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	err = platform_device_add_resources(pdev, &res, 1);
+	if (err) {
+		pr_err("Failed to add device resource (err = %d)\n", err);
+		goto exit_device_put;
+	}
+
+	err = platform_device_add(pdev);
+	if (err) {
+		pr_err("Failed to add device (err = %d)\n", err);
+		goto exit_device_put;
+	}
+
+	return 0;
+
+exit_device_put:
+	platform_device_put(pdev);
+	pdev = NULL;
+exit:
+	return err;
+}
+
+static int dme1737_isa_probe(struct platform_device *pdev)
+{
+	u8 company, device;
+	struct resource *res;
+	struct dme1737_data *data;
+	struct device *dev = &pdev->dev;
+	int err;
+
+	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (!devm_request_region(dev, res->start, DME1737_EXTENT, "dme1737")) {
+		dev_err(dev, "Failed to request region 0x%04x-0x%04x.\n",
+			(unsigned short)res->start,
+			(unsigned short)res->start + DME1737_EXTENT - 1);
+		return -EBUSY;
+	}
+
+	data = devm_kzalloc(dev, sizeof(struct dme1737_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->addr = res->start;
+	platform_set_drvdata(pdev, data);
+
+	/* Skip chip detection if module is loaded with force_id parameter */
+	switch (force_id) {
+	case SCH3112_ID:
+	case SCH3114_ID:
+	case SCH3116_ID:
+		data->type = sch311x;
+		break;
+	case SCH5127_ID:
+		data->type = sch5127;
+		break;
+	default:
+		company = dme1737_read(data, DME1737_REG_COMPANY);
+		device = dme1737_read(data, DME1737_REG_DEVICE);
+
+		if ((company == DME1737_COMPANY_SMSC) &&
+		    (device == SCH311X_DEVICE)) {
+			data->type = sch311x;
+		} else if ((company == DME1737_COMPANY_SMSC) &&
+			   (device == SCH5127_DEVICE)) {
+			data->type = sch5127;
+		} else {
+			return -ENODEV;
+		}
+	}
+
+	if (data->type == sch5127)
+		data->name = "sch5127";
+	else
+		data->name = "sch311x";
+
+	/* Initialize the mutex */
+	mutex_init(&data->update_lock);
+
+	dev_info(dev, "Found a %s chip at 0x%04x\n",
+		 data->type == sch5127 ? "SCH5127" : "SCH311x", data->addr);
+
+	/* Initialize the chip */
+	err = dme1737_init_device(dev);
+	if (err) {
+		dev_err(dev, "Failed to initialize device.\n");
+		return err;
+	}
+
+	/* Create sysfs files */
+	err = dme1737_create_files(dev);
+	if (err) {
+		dev_err(dev, "Failed to create sysfs files.\n");
+		return err;
+	}
+
+	/* Register device */
+	data->hwmon_dev = hwmon_device_register(dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		dev_err(dev, "Failed to register device.\n");
+		err = PTR_ERR(data->hwmon_dev);
+		goto exit_remove_files;
+	}
+
+	return 0;
+
+exit_remove_files:
+	dme1737_remove_files(dev);
+	return err;
+}
+
+static int dme1737_isa_remove(struct platform_device *pdev)
+{
+	struct dme1737_data *data = platform_get_drvdata(pdev);
+
+	hwmon_device_unregister(data->hwmon_dev);
+	dme1737_remove_files(&pdev->dev);
+
+	return 0;
+}
+
+static struct platform_driver dme1737_isa_driver = {
+	.driver = {
+		.name = "dme1737",
+	},
+	.probe = dme1737_isa_probe,
+	.remove = dme1737_isa_remove,
+};
+
+/* ---------------------------------------------------------------------
+ * Module initialization and cleanup
+ * --------------------------------------------------------------------- */
+
+static int __init dme1737_init(void)
+{
+	int err;
+	unsigned short addr;
+
+	err = i2c_add_driver(&dme1737_i2c_driver);
+	if (err)
+		goto exit;
+
+	if (dme1737_isa_detect(0x2e, &addr) &&
+	    dme1737_isa_detect(0x4e, &addr) &&
+	    (!probe_all_addr ||
+	     (dme1737_isa_detect(0x162e, &addr) &&
+	      dme1737_isa_detect(0x164e, &addr)))) {
+		/* Return 0 if we didn't find an ISA device */
+		return 0;
+	}
+
+	err = platform_driver_register(&dme1737_isa_driver);
+	if (err)
+		goto exit_del_i2c_driver;
+
+	/* Sets global pdev as a side effect */
+	err = dme1737_isa_device_add(addr);
+	if (err)
+		goto exit_del_isa_driver;
+
+	return 0;
+
+exit_del_isa_driver:
+	platform_driver_unregister(&dme1737_isa_driver);
+exit_del_i2c_driver:
+	i2c_del_driver(&dme1737_i2c_driver);
+exit:
+	return err;
+}
+
+static void __exit dme1737_exit(void)
+{
+	if (pdev) {
+		platform_device_unregister(pdev);
+		platform_driver_unregister(&dme1737_isa_driver);
+	}
+
+	i2c_del_driver(&dme1737_i2c_driver);
+}
+
+MODULE_AUTHOR("Juerg Haefliger <juergh@gmail.com>");
+MODULE_DESCRIPTION("DME1737 sensors");
+MODULE_LICENSE("GPL");
+
+module_init(dme1737_init);
+module_exit(dme1737_exit);