Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 211 insertions, 0 deletions

diff --git a/drivers/hwmon/pmbus/ltc3815.c b/drivers/hwmon/pmbus/ltc3815.c
new file mode 100644
index 000000000..8e13a7ddc
--- /dev/null
+++ b/drivers/hwmon/pmbus/ltc3815.c
@@ -0,0 +1,211 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Hardware monitoring driver for LTC3815
+ *
+ * Copyright (c) 2015 Linear Technology
+ * Copyright (c) 2015 Guenter Roeck
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include "pmbus.h"
+
+#define LTC3815_MFR_IOUT_PEAK	0xd7
+#define LTC3815_MFR_VOUT_PEAK	0xdd
+#define LTC3815_MFR_VIN_PEAK	0xde
+#define LTC3815_MFR_TEMP_PEAK	0xdf
+#define LTC3815_MFR_IIN_PEAK	0xe1
+#define LTC3815_MFR_SPECIAL_ID	0xe7
+
+#define LTC3815_ID		0x8000
+#define LTC3815_ID_MASK		0xff00
+
+static int ltc3815_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+	int ret;
+
+	switch (reg) {
+	case PMBUS_VOUT_MODE:
+		/*
+		 * The chip returns 0x3e, suggesting VID mode with manufacturer
+		 * specific VID codes. Since the output voltage is reported
+		 * with a LSB of 0.5mV, override and report direct mode with
+		 * appropriate coefficients.
+		 */
+		ret = 0x40;
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
+static int ltc3815_write_byte(struct i2c_client *client, int page, u8 reg)
+{
+	int ret;
+
+	switch (reg) {
+	case PMBUS_CLEAR_FAULTS:
+		/*
+		 * LTC3815 does not support the CLEAR_FAULTS command.
+		 * Emulate it by clearing the status register.
+		 */
+		ret = pmbus_read_word_data(client, 0, 0xff, PMBUS_STATUS_WORD);
+		if (ret > 0) {
+			pmbus_write_word_data(client, 0, PMBUS_STATUS_WORD,
+					      ret);
+			ret = 0;
+		}
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
+static int ltc3815_read_word_data(struct i2c_client *client, int page,
+				  int phase, int reg)
+{
+	int ret;
+
+	switch (reg) {
+	case PMBUS_VIRT_READ_VIN_MAX:
+		ret = pmbus_read_word_data(client, page, phase,
+					   LTC3815_MFR_VIN_PEAK);
+		break;
+	case PMBUS_VIRT_READ_VOUT_MAX:
+		ret = pmbus_read_word_data(client, page, phase,
+					   LTC3815_MFR_VOUT_PEAK);
+		break;
+	case PMBUS_VIRT_READ_TEMP_MAX:
+		ret = pmbus_read_word_data(client, page, phase,
+					   LTC3815_MFR_TEMP_PEAK);
+		break;
+	case PMBUS_VIRT_READ_IOUT_MAX:
+		ret = pmbus_read_word_data(client, page, phase,
+					   LTC3815_MFR_IOUT_PEAK);
+		break;
+	case PMBUS_VIRT_READ_IIN_MAX:
+		ret = pmbus_read_word_data(client, page, phase,
+					   LTC3815_MFR_IIN_PEAK);
+		break;
+	case PMBUS_VIRT_RESET_VOUT_HISTORY:
+	case PMBUS_VIRT_RESET_VIN_HISTORY:
+	case PMBUS_VIRT_RESET_TEMP_HISTORY:
+	case PMBUS_VIRT_RESET_IOUT_HISTORY:
+	case PMBUS_VIRT_RESET_IIN_HISTORY:
+		ret = 0;
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
+static int ltc3815_write_word_data(struct i2c_client *client, int page,
+				   int reg, u16 word)
+{
+	int ret;
+
+	switch (reg) {
+	case PMBUS_VIRT_RESET_IIN_HISTORY:
+		ret = pmbus_write_word_data(client, page,
+					    LTC3815_MFR_IIN_PEAK, 0);
+		break;
+	case PMBUS_VIRT_RESET_IOUT_HISTORY:
+		ret = pmbus_write_word_data(client, page,
+					    LTC3815_MFR_IOUT_PEAK, 0);
+		break;
+	case PMBUS_VIRT_RESET_VOUT_HISTORY:
+		ret = pmbus_write_word_data(client, page,
+					    LTC3815_MFR_VOUT_PEAK, 0);
+		break;
+	case PMBUS_VIRT_RESET_VIN_HISTORY:
+		ret = pmbus_write_word_data(client, page,
+					    LTC3815_MFR_VIN_PEAK, 0);
+		break;
+	case PMBUS_VIRT_RESET_TEMP_HISTORY:
+		ret = pmbus_write_word_data(client, page,
+					    LTC3815_MFR_TEMP_PEAK, 0);
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
+static const struct i2c_device_id ltc3815_id[] = {
+	{"ltc3815", 0},
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ltc3815_id);
+
+static struct pmbus_driver_info ltc3815_info = {
+	.pages = 1,
+	.format[PSC_VOLTAGE_IN] = direct,
+	.format[PSC_VOLTAGE_OUT] = direct,
+	.format[PSC_CURRENT_IN] = direct,
+	.format[PSC_CURRENT_OUT] = direct,
+	.format[PSC_TEMPERATURE] = direct,
+	.m[PSC_VOLTAGE_IN] = 250,
+	.b[PSC_VOLTAGE_IN] = 0,
+	.R[PSC_VOLTAGE_IN] = 0,
+	.m[PSC_VOLTAGE_OUT] = 2,
+	.b[PSC_VOLTAGE_OUT] = 0,
+	.R[PSC_VOLTAGE_OUT] = 3,
+	.m[PSC_CURRENT_IN] = 1,
+	.b[PSC_CURRENT_IN] = 0,
+	.R[PSC_CURRENT_IN] = 2,
+	.m[PSC_CURRENT_OUT] = 1,
+	.b[PSC_CURRENT_OUT] = 0,
+	.R[PSC_CURRENT_OUT] = 2,
+	.m[PSC_TEMPERATURE] = 1,
+	.b[PSC_TEMPERATURE] = 0,
+	.R[PSC_TEMPERATURE] = 0,
+	.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN | PMBUS_HAVE_VOUT |
+		PMBUS_HAVE_IOUT | PMBUS_HAVE_TEMP,
+	.read_byte_data = ltc3815_read_byte_data,
+	.read_word_data = ltc3815_read_word_data,
+	.write_byte = ltc3815_write_byte,
+	.write_word_data = ltc3815_write_word_data,
+};
+
+static int ltc3815_probe(struct i2c_client *client)
+{
+	int chip_id;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_READ_WORD_DATA))
+		return -ENODEV;
+
+	chip_id = i2c_smbus_read_word_data(client, LTC3815_MFR_SPECIAL_ID);
+	if (chip_id < 0)
+		return chip_id;
+	if ((chip_id & LTC3815_ID_MASK) != LTC3815_ID)
+		return -ENODEV;
+
+	return pmbus_do_probe(client, &ltc3815_info);
+}
+
+static struct i2c_driver ltc3815_driver = {
+	.driver = {
+		   .name = "ltc3815",
+		   },
+	.probe_new = ltc3815_probe,
+	.id_table = ltc3815_id,
+};
+
+module_i2c_driver(ltc3815_driver);
+
+MODULE_AUTHOR("Guenter Roeck");
+MODULE_DESCRIPTION("PMBus driver for LTC3815");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);