Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

48 files changed, 17831 insertions, 0 deletions

diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
new file mode 100644
index 000000000..89668af67
--- /dev/null
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -0,0 +1,464 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# PMBus chip drivers configuration
+#
+
+menuconfig PMBUS
+	tristate "PMBus support"
+	depends on I2C
+	help
+	  Say yes here if you want to enable PMBus support.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called pmbus_core.
+
+if PMBUS
+
+config SENSORS_PMBUS
+	tristate "Generic PMBus devices"
+	default y
+	help
+	  If you say yes here you get hardware monitoring support for generic
+	  PMBus devices, including but not limited to ADP4000, BMR310, BMR453,
+	  BMR454, BMR456, BMR457, BMR458, BMR480, BMR490, BMR491, BMR492,
+	  MAX20796, MDT040, NCP4200, NCP4208, PDT003, PDT006, PDT012,
+	  TPS40400, TPS544B20, TPS544B25, TPS544C20, TPS544C25, and UDT020.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called pmbus.
+
+config SENSORS_ADM1266
+	tristate "Analog Devices ADM1266 Sequencer"
+	select CRC8
+	depends on GPIOLIB
+	help
+	  If you say yes here you get hardware monitoring support for Analog
+	  Devices ADM1266 Cascadable Super Sequencer.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called adm1266.
+
+config SENSORS_ADM1275
+	tristate "Analog Devices ADM1275 and compatibles"
+	help
+	  If you say yes here you get hardware monitoring support for Analog
+	  Devices ADM1075, ADM1272, ADM1275, ADM1276, ADM1278, ADM1293,
+	  and ADM1294 Hot-Swap Controller and Digital Power Monitors.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called adm1275.
+
+config SENSORS_BEL_PFE
+	tristate "Bel PFE Compatible Power Supplies"
+	help
+	  If you say yes here you get hardware monitoring support for BEL
+	  PFE1100 and PFE3000 Power Supplies.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called bel-pfe.
+
+config SENSORS_BPA_RS600
+	tristate "BluTek BPA-RS600 Power Supplies"
+	help
+	  If you say yes here you get hardware monitoring support for BluTek
+	  BPA-RS600 Power Supplies.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called bpa-rs600.
+
+config SENSORS_DELTA_AHE50DC_FAN
+	tristate "Delta AHE-50DC fan control module"
+	help
+	  If you say yes here you get hardware monitoring support for
+	  the integrated fan control module of the Delta AHE-50DC
+	  Open19 power shelf.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called delta-ahe50dc-fan.
+
+config SENSORS_FSP_3Y
+	tristate "FSP/3Y-Power power supplies"
+	help
+	  If you say yes here you get hardware monitoring support for
+	  FSP/3Y-Power hot-swap power supplies.
+	  Supported models: YH-5151E, YM-2151E
+
+	  This driver can also be built as a module. If so, the module will
+	  be called fsp-3y.
+
+config SENSORS_IBM_CFFPS
+	tristate "IBM Common Form Factor Power Supply"
+	depends on LEDS_CLASS
+	help
+	  If you say yes here you get hardware monitoring support for the IBM
+	  Common Form Factor power supply.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called ibm-cffps.
+
+config SENSORS_DPS920AB
+	tristate "Delta DPS920AB Power Supply"
+	help
+	  If you say yes here you get hardware monitoring support for Delta
+	  DPS920AB Power Supplies.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called dps920ab.
+
+config SENSORS_INSPUR_IPSPS
+	tristate "INSPUR Power System Power Supply"
+	help
+	  If you say yes here you get hardware monitoring support for the INSPUR
+	  Power System power supply.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called inspur-ipsps.
+
+config SENSORS_IR35221
+	tristate "Infineon IR35221"
+	help
+	  If you say yes here you get hardware monitoring support for the
+	  Infineon IR35221 controller.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called ir35221.
+
+config SENSORS_IR36021
+	tristate "Infineon IR36021"
+	help
+	  If you say yes here you get hardware monitoring support for Infineon
+	  IR36021.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called ir36021.
+
+config SENSORS_IR38064
+	tristate "Infineon IR38064 and compatibles"
+	help
+	  If you say yes here you get hardware monitoring support for Infineon
+	  IR38060, IR38064, IR38164 and IR38263.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called ir38064.
+
+config SENSORS_IR38064_REGULATOR
+	bool "Regulator support for IR38064 and compatibles"
+	depends on SENSORS_IR38064 && REGULATOR
+	help
+	  Uses the IR38064 or compatible as regulator.
+
+config SENSORS_IRPS5401
+	tristate "Infineon IRPS5401"
+	help
+	  If you say yes here you get hardware monitoring support for the
+	  Infineon IRPS5401 controller.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called irps5401.
+
+config SENSORS_ISL68137
+	tristate "Renesas Digital Multiphase Voltage Regulators"
+	help
+	  If you say yes here you get hardware monitoring support for Renesas
+	  digital multiphase voltage regulators.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called isl68137.
+
+config SENSORS_LM25066
+	tristate "National Semiconductor LM25066 and compatibles"
+	help
+	  If you say yes here you get hardware monitoring support for National
+	  Semiconductor LM25056, LM25066, LM5064, and LM5066.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called lm25066.
+
+config SENSORS_LM25066_REGULATOR
+	bool "Regulator support for LM25066 and compatibles"
+	depends on SENSORS_LM25066 && REGULATOR
+	help
+	  If you say yes here you get regulator support for National
+	  Semiconductor LM25066, LM5064, and LM5066.
+
+config SENSORS_LT7182S
+	tristate "Analog Devices LT7182S"
+	help
+	  If you say yes here you get hardware monitoring support for Analog
+	  Devices LT7182S.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called lt7182s.
+
+config SENSORS_LTC2978
+	tristate "Linear Technologies LTC2978 and compatibles"
+	help
+	  If you say yes here you get hardware monitoring support for Linear
+	  Technology LTC2972, LTC2974, LTC2975, LTC2977, LTC2978, LTC2979,
+	  LTC2980, and LTM2987.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called ltc2978.
+
+config SENSORS_LTC2978_REGULATOR
+	bool "Regulator support for LTC2978 and compatibles"
+	depends on SENSORS_LTC2978 && REGULATOR
+	help
+	  If you say yes here you get regulator support for Linear Technology
+	  LTC3880, LTC3883, LTC3884, LTC3886, LTC3887, LTC3889, LTC7880,
+	  LTM4644, LTM4675, LTM4676, LTM4677, LTM4678, LTM4680, LTM4686,
+	  and LTM4700.
+
+config SENSORS_LTC3815
+	tristate "Linear Technologies LTC3815"
+	help
+	  If you say yes here you get hardware monitoring support for Linear
+	  Technology LTC3815.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called ltc3815.
+
+config SENSORS_MAX15301
+	tristate "Maxim MAX15301"
+	help
+	  If you say yes here you get hardware monitoring support for Maxim
+	  MAX15301, as well as for Flex BMR461.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called max15301.
+
+config SENSORS_MAX16064
+	tristate "Maxim MAX16064"
+	help
+	  If you say yes here you get hardware monitoring support for Maxim
+	  MAX16064.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called max16064.
+
+config SENSORS_MAX16601
+	tristate "Maxim MAX16508, MAX16601, MAX16602"
+	help
+	  If you say yes here you get hardware monitoring support for Maxim
+	  MAX16508, MAX16601 and MAX16602.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called max16601.
+
+config SENSORS_MAX20730
+	tristate "Maxim MAX20710, MAX20730, MAX20734, MAX20743"
+	help
+	  If you say yes here you get hardware monitoring support for Maxim
+	  MAX20710, MAX20730, MAX20734, and MAX20743.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called max20730.
+
+config SENSORS_MAX20751
+	tristate "Maxim MAX20751"
+	help
+	  If you say yes here you get hardware monitoring support for Maxim
+	  MAX20751.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called max20751.
+
+config SENSORS_MAX31785
+	tristate "Maxim MAX31785 and compatibles"
+	help
+	  If you say yes here you get hardware monitoring support for Maxim
+	  MAX31785.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called max31785.
+
+config SENSORS_MAX34440
+	tristate "Maxim MAX34440 and compatibles"
+	help
+	  If you say yes here you get hardware monitoring support for Maxim
+	  MAX34440, MAX34441, MAX34446, MAX34451, MAX34460, and MAX34461.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called max34440.
+
+config SENSORS_MAX8688
+	tristate "Maxim MAX8688"
+	help
+	  If you say yes here you get hardware monitoring support for Maxim
+	  MAX8688.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called max8688.
+
+config SENSORS_MP2888
+	tristate "MPS MP2888"
+	help
+	  If you say yes here you get hardware monitoring support for MPS
+	  MP2888 Digital, Multi-Phase, Pulse-Width Modulation Controller.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called mp2888.
+
+config SENSORS_MP2975
+	tristate "MPS MP2975"
+	help
+	  If you say yes here you get hardware monitoring support for MPS
+	  MP2975 Dual Loop Digital Multi-Phase Controller.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called mp2975.
+
+config SENSORS_MP5023
+	tristate "MPS MP5023"
+	help
+	  If you say yes here you get hardware monitoring support for MPS
+	  MP5023.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called mp5023.
+
+config SENSORS_PIM4328
+	tristate "Flex PIM4328 and compatibles"
+	help
+	  If you say yes here you get hardware monitoring support for Flex
+	  PIM4328, PIM4820 and PIM4006 Power Interface Modules.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called pim4328.
+
+config SENSORS_PLI1209BC
+	tristate "Vicor PLI1209BC"
+	help
+	  If you say yes here you get hardware monitoring support for Vicor
+	  PLI1209BC Digital Supervisor.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called pli1209bc.
+
+config SENSORS_PLI1209BC_REGULATOR
+	bool "Regulator support for PLI1209BC"
+	depends on SENSORS_PLI1209BC && REGULATOR
+	help
+	  If you say yes here you get regulator support for Vicor PLI1209BC
+	  Digital Supervisor.
+
+config SENSORS_PM6764TR
+	tristate "ST PM6764TR"
+	help
+	  If you say yes here you get hardware monitoring support for ST
+	  PM6764TR.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called pm6764tr.
+
+config SENSORS_PXE1610
+	tristate "Infineon PXE1610"
+	help
+	  If you say yes here you get hardware monitoring support for Infineon
+	  PXE1610.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called pxe1610.
+
+config SENSORS_Q54SJ108A2
+	tristate "Delta Power Supplies Q54SJ108A2"
+	help
+	  If you say yes here you get hardware monitoring support for Delta
+	  Q54SJ108A2 series Power Supplies.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called q54sj108a2.
+
+config SENSORS_STPDDC60
+	tristate "ST STPDDC60"
+	help
+	  If you say yes here you get hardware monitoring support for ST
+	  STPDDC60 Universal Digital Multicell Controller, as well as for
+	  Flex BMR481.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called stpddc60.
+
+config SENSORS_TPS40422
+	tristate "TI TPS40422"
+	help
+	  If you say yes here you get hardware monitoring support for TI
+	  TPS40422.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called tps40422.
+
+config SENSORS_TPS53679
+	tristate "TI TPS53647, TPS53667, TPS53676, TPS53679, TPS53681, TPS53688"
+	help
+	  If you say yes here you get hardware monitoring support for TI
+	  TPS53647, TPS53667, TPS53676, TPS53679, TPS53681, and TPS53688.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called tps53679.
+
+config SENSORS_TPS546D24
+	tristate "TPS546D24"
+	help
+	  If you say yes here you get hardware monitoring support for TEXAS
+	  TPS546D24.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called tps546d24
+
+config SENSORS_UCD9000
+	tristate "TI UCD90120, UCD90124, UCD90160, UCD90320, UCD9090, UCD90910"
+	help
+	  If you say yes here you get hardware monitoring support for TI
+	  UCD90120, UCD90124, UCD90160, UCD90320, UCD9090, UCD90910, Sequencer
+	  and System Health Controllers.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called ucd9000.
+
+config SENSORS_UCD9200
+	tristate "TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, UCD9248"
+	help
+	  If you say yes here you get hardware monitoring support for TI
+	  UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248
+	  Digital PWM System Controllers.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called ucd9200.
+
+config SENSORS_XDPE152
+	tristate "Infineon XDPE152 family"
+	help
+	  If you say yes here you get hardware monitoring support for Infineon
+	  XDPE15284, XDPE152C4, device.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called xdpe152c4.
+
+config SENSORS_XDPE122
+	tristate "Infineon XDPE122 family"
+	help
+	  If you say yes here you get hardware monitoring support for Infineon
+	  XDPE12254, XDPE12284, device.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called xdpe12284.
+
+config SENSORS_XDPE122_REGULATOR
+	bool "Regulator support for XDPE122 and compatibles"
+	depends on SENSORS_XDPE122 && REGULATOR
+	help
+	  Uses the xdpe12284 or compatible as regulator.
+
+config SENSORS_ZL6100
+	tristate "Intersil ZL6100 and compatibles"
+	help
+	  If you say yes here you get hardware monitoring support for Intersil
+	  ZL2004, ZL2005, ZL2006, ZL2008, ZL2105, ZL2106, ZL6100, ZL6105,
+	  ZL9101M, and ZL9117M Digital DC/DC Controllers, as well as for
+	  Ericsson BMR450, BMR451, BMR462, BMR463, and BMR464.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called zl6100.
+
+endif # PMBUS
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
new file mode 100644
index 000000000..0002dbe22
--- /dev/null
+++ b/drivers/hwmon/pmbus/Makefile
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for PMBus chip drivers.
+#
+
+obj-$(CONFIG_PMBUS)		+= pmbus_core.o
+obj-$(CONFIG_SENSORS_PMBUS)	+= pmbus.o
+obj-$(CONFIG_SENSORS_ADM1266)	+= adm1266.o
+obj-$(CONFIG_SENSORS_ADM1275)	+= adm1275.o
+obj-$(CONFIG_SENSORS_BEL_PFE)	+= bel-pfe.o
+obj-$(CONFIG_SENSORS_BPA_RS600)	+= bpa-rs600.o
+obj-$(CONFIG_SENSORS_DELTA_AHE50DC_FAN) += delta-ahe50dc-fan.o
+obj-$(CONFIG_SENSORS_FSP_3Y)	+= fsp-3y.o
+obj-$(CONFIG_SENSORS_IBM_CFFPS)	+= ibm-cffps.o
+obj-$(CONFIG_SENSORS_DPS920AB)	+= dps920ab.o
+obj-$(CONFIG_SENSORS_INSPUR_IPSPS) += inspur-ipsps.o
+obj-$(CONFIG_SENSORS_IR35221)	+= ir35221.o
+obj-$(CONFIG_SENSORS_IR36021)	+= ir36021.o
+obj-$(CONFIG_SENSORS_IR38064)	+= ir38064.o
+obj-$(CONFIG_SENSORS_IRPS5401)	+= irps5401.o
+obj-$(CONFIG_SENSORS_ISL68137)	+= isl68137.o
+obj-$(CONFIG_SENSORS_LM25066)	+= lm25066.o
+obj-$(CONFIG_SENSORS_LT7182S)	+= lt7182s.o
+obj-$(CONFIG_SENSORS_LTC2978)	+= ltc2978.o
+obj-$(CONFIG_SENSORS_LTC3815)	+= ltc3815.o
+obj-$(CONFIG_SENSORS_MAX15301)	+= max15301.o
+obj-$(CONFIG_SENSORS_MAX16064)	+= max16064.o
+obj-$(CONFIG_SENSORS_MAX16601)	+= max16601.o
+obj-$(CONFIG_SENSORS_MAX20730)	+= max20730.o
+obj-$(CONFIG_SENSORS_MAX20751)	+= max20751.o
+obj-$(CONFIG_SENSORS_MAX31785)	+= max31785.o
+obj-$(CONFIG_SENSORS_MAX34440)	+= max34440.o
+obj-$(CONFIG_SENSORS_MAX8688)	+= max8688.o
+obj-$(CONFIG_SENSORS_MP2888)	+= mp2888.o
+obj-$(CONFIG_SENSORS_MP2975)	+= mp2975.o
+obj-$(CONFIG_SENSORS_MP5023)	+= mp5023.o
+obj-$(CONFIG_SENSORS_PLI1209BC)	+= pli1209bc.o
+obj-$(CONFIG_SENSORS_PM6764TR)	+= pm6764tr.o
+obj-$(CONFIG_SENSORS_PXE1610)	+= pxe1610.o
+obj-$(CONFIG_SENSORS_Q54SJ108A2)	+= q54sj108a2.o
+obj-$(CONFIG_SENSORS_STPDDC60)	+= stpddc60.o
+obj-$(CONFIG_SENSORS_TPS40422)	+= tps40422.o
+obj-$(CONFIG_SENSORS_TPS53679)	+= tps53679.o
+obj-$(CONFIG_SENSORS_TPS546D24)	+= tps546d24.o
+obj-$(CONFIG_SENSORS_UCD9000)	+= ucd9000.o
+obj-$(CONFIG_SENSORS_UCD9200)	+= ucd9200.o
+obj-$(CONFIG_SENSORS_XDPE122)	+= xdpe12284.o
+obj-$(CONFIG_SENSORS_XDPE152)	+= xdpe152c4.o
+obj-$(CONFIG_SENSORS_ZL6100)	+= zl6100.o
+obj-$(CONFIG_SENSORS_PIM4328)	+= pim4328.o
diff --git a/drivers/hwmon/pmbus/adm1266.c b/drivers/hwmon/pmbus/adm1266.c
new file mode 100644
index 000000000..1ac2b2f4c
--- /dev/null
+++ b/drivers/hwmon/pmbus/adm1266.c
@@ -0,0 +1,514 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ADM1266 - Cascadable Super Sequencer with Margin
+ * Control and Fault Recording
+ *
+ * Copyright 2020 Analog Devices Inc.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/crc8.h>
+#include <linux/debugfs.h>
+#include <linux/gpio/driver.h>
+#include <linux/i2c.h>
+#include <linux/i2c-smbus.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/nvmem-provider.h>
+#include "pmbus.h"
+#include <linux/slab.h>
+#include <linux/timekeeping.h>
+
+#define ADM1266_BLACKBOX_CONFIG	0xD3
+#define ADM1266_PDIO_CONFIG	0xD4
+#define ADM1266_READ_STATE	0xD9
+#define ADM1266_READ_BLACKBOX	0xDE
+#define ADM1266_SET_RTC		0xDF
+#define ADM1266_GPIO_CONFIG	0xE1
+#define ADM1266_BLACKBOX_INFO	0xE6
+#define ADM1266_PDIO_STATUS	0xE9
+#define ADM1266_GPIO_STATUS	0xEA
+
+/* ADM1266 GPIO defines */
+#define ADM1266_GPIO_NR			9
+#define ADM1266_GPIO_FUNCTIONS(x)	FIELD_GET(BIT(0), x)
+#define ADM1266_GPIO_INPUT_EN(x)	FIELD_GET(BIT(2), x)
+#define ADM1266_GPIO_OUTPUT_EN(x)	FIELD_GET(BIT(3), x)
+#define ADM1266_GPIO_OPEN_DRAIN(x)	FIELD_GET(BIT(4), x)
+
+/* ADM1266 PDIO defines */
+#define ADM1266_PDIO_NR			16
+#define ADM1266_PDIO_PIN_CFG(x)		FIELD_GET(GENMASK(15, 13), x)
+#define ADM1266_PDIO_GLITCH_FILT(x)	FIELD_GET(GENMASK(12, 9), x)
+#define ADM1266_PDIO_OUT_CFG(x)		FIELD_GET(GENMASK(2, 0), x)
+
+#define ADM1266_BLACKBOX_OFFSET		0
+#define ADM1266_BLACKBOX_SIZE		64
+
+#define ADM1266_PMBUS_BLOCK_MAX		255
+
+struct adm1266_data {
+	struct pmbus_driver_info info;
+	struct gpio_chip gc;
+	const char *gpio_names[ADM1266_GPIO_NR + ADM1266_PDIO_NR];
+	struct i2c_client *client;
+	struct dentry *debugfs_dir;
+	struct nvmem_config nvmem_config;
+	struct nvmem_device *nvmem;
+	u8 *dev_mem;
+	struct mutex buf_mutex;
+	u8 write_buf[ADM1266_PMBUS_BLOCK_MAX + 1] ____cacheline_aligned;
+	u8 read_buf[ADM1266_PMBUS_BLOCK_MAX + 1] ____cacheline_aligned;
+};
+
+static const struct nvmem_cell_info adm1266_nvmem_cells[] = {
+	{
+		.name           = "blackbox",
+		.offset         = ADM1266_BLACKBOX_OFFSET,
+		.bytes          = 2048,
+	},
+};
+
+DECLARE_CRC8_TABLE(pmbus_crc_table);
+
+/*
+ * Different from Block Read as it sends data and waits for the slave to
+ * return a value dependent on that data. The protocol is simply a Write Block
+ * followed by a Read Block without the Read-Block command field and the
+ * Write-Block STOP bit.
+ */
+static int adm1266_pmbus_block_xfer(struct adm1266_data *data, u8 cmd, u8 w_len, u8 *data_w,
+				    u8 *data_r)
+{
+	struct i2c_client *client = data->client;
+	struct i2c_msg msgs[2] = {
+		{
+			.addr = client->addr,
+			.flags = I2C_M_DMA_SAFE,
+			.buf = data->write_buf,
+			.len = w_len + 2,
+		},
+		{
+			.addr = client->addr,
+			.flags = I2C_M_RD | I2C_M_DMA_SAFE,
+			.buf = data->read_buf,
+			.len = ADM1266_PMBUS_BLOCK_MAX + 2,
+		}
+	};
+	u8 addr;
+	u8 crc;
+	int ret;
+
+	mutex_lock(&data->buf_mutex);
+
+	msgs[0].buf[0] = cmd;
+	msgs[0].buf[1] = w_len;
+	memcpy(&msgs[0].buf[2], data_w, w_len);
+
+	ret = i2c_transfer(client->adapter, msgs, 2);
+	if (ret != 2) {
+		if (ret >= 0)
+			ret = -EPROTO;
+
+		mutex_unlock(&data->buf_mutex);
+
+		return ret;
+	}
+
+	if (client->flags & I2C_CLIENT_PEC) {
+		addr = i2c_8bit_addr_from_msg(&msgs[0]);
+		crc = crc8(pmbus_crc_table, &addr, 1, 0);
+		crc = crc8(pmbus_crc_table, msgs[0].buf,  msgs[0].len, crc);
+
+		addr = i2c_8bit_addr_from_msg(&msgs[1]);
+		crc = crc8(pmbus_crc_table, &addr, 1, crc);
+		crc = crc8(pmbus_crc_table, msgs[1].buf,  msgs[1].buf[0] + 1, crc);
+
+		if (crc != msgs[1].buf[msgs[1].buf[0] + 1]) {
+			mutex_unlock(&data->buf_mutex);
+			return -EBADMSG;
+		}
+	}
+
+	memcpy(data_r, &msgs[1].buf[1], msgs[1].buf[0]);
+
+	ret = msgs[1].buf[0];
+	mutex_unlock(&data->buf_mutex);
+
+	return ret;
+}
+
+static const unsigned int adm1266_gpio_mapping[ADM1266_GPIO_NR][2] = {
+	{1, 0},
+	{2, 1},
+	{3, 2},
+	{4, 8},
+	{5, 9},
+	{6, 10},
+	{7, 11},
+	{8, 6},
+	{9, 7},
+};
+
+static const char *adm1266_names[ADM1266_GPIO_NR + ADM1266_PDIO_NR] = {
+	"GPIO1", "GPIO2", "GPIO3", "GPIO4", "GPIO5", "GPIO6", "GPIO7", "GPIO8",
+	"GPIO9", "PDIO1", "PDIO2", "PDIO3", "PDIO4", "PDIO5", "PDIO6",
+	"PDIO7", "PDIO8", "PDIO9", "PDIO10", "PDIO11", "PDIO12", "PDIO13",
+	"PDIO14", "PDIO15", "PDIO16",
+};
+
+static int adm1266_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct adm1266_data *data = gpiochip_get_data(chip);
+	u8 read_buf[I2C_SMBUS_BLOCK_MAX + 1];
+	unsigned long pins_status;
+	unsigned int pmbus_cmd;
+	int ret;
+
+	if (offset < ADM1266_GPIO_NR)
+		pmbus_cmd = ADM1266_GPIO_STATUS;
+	else
+		pmbus_cmd = ADM1266_PDIO_STATUS;
+
+	ret = i2c_smbus_read_block_data(data->client, pmbus_cmd, read_buf);
+	if (ret < 0)
+		return ret;
+
+	pins_status = read_buf[0] + (read_buf[1] << 8);
+	if (offset < ADM1266_GPIO_NR)
+		return test_bit(adm1266_gpio_mapping[offset][1], &pins_status);
+
+	return test_bit(offset - ADM1266_GPIO_NR, &pins_status);
+}
+
+static int adm1266_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
+				     unsigned long *bits)
+{
+	struct adm1266_data *data = gpiochip_get_data(chip);
+	u8 read_buf[ADM1266_PMBUS_BLOCK_MAX + 1];
+	unsigned long status;
+	unsigned int gpio_nr;
+	int ret;
+
+	ret = i2c_smbus_read_block_data(data->client, ADM1266_GPIO_STATUS, read_buf);
+	if (ret < 0)
+		return ret;
+
+	status = read_buf[0] + (read_buf[1] << 8);
+
+	*bits = 0;
+	for_each_set_bit(gpio_nr, mask, ADM1266_GPIO_NR) {
+		if (test_bit(adm1266_gpio_mapping[gpio_nr][1], &status))
+			set_bit(gpio_nr, bits);
+	}
+
+	ret = i2c_smbus_read_block_data(data->client, ADM1266_PDIO_STATUS, read_buf);
+	if (ret < 0)
+		return ret;
+
+	status = read_buf[0] + (read_buf[1] << 8);
+
+	*bits = 0;
+	for_each_set_bit_from(gpio_nr, mask, ADM1266_GPIO_NR + ADM1266_PDIO_STATUS) {
+		if (test_bit(gpio_nr - ADM1266_GPIO_NR, &status))
+			set_bit(gpio_nr, bits);
+	}
+
+	return 0;
+}
+
+static void adm1266_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
+{
+	struct adm1266_data *data = gpiochip_get_data(chip);
+	u8 read_buf[ADM1266_PMBUS_BLOCK_MAX + 1];
+	unsigned long gpio_config;
+	unsigned long pdio_config;
+	unsigned long pin_cfg;
+	u8 write_cmd;
+	int ret;
+	int i;
+
+	for (i = 0; i < ADM1266_GPIO_NR; i++) {
+		write_cmd = adm1266_gpio_mapping[i][1];
+		ret = adm1266_pmbus_block_xfer(data, ADM1266_GPIO_CONFIG, 1, &write_cmd, read_buf);
+		if (ret != 2)
+			return;
+
+		gpio_config = read_buf[0];
+		seq_puts(s, adm1266_names[i]);
+
+		seq_puts(s, " ( ");
+		if (!ADM1266_GPIO_FUNCTIONS(gpio_config)) {
+			seq_puts(s, "high-Z )\n");
+			continue;
+		}
+		if (ADM1266_GPIO_INPUT_EN(gpio_config))
+			seq_puts(s, "input ");
+		if (ADM1266_GPIO_OUTPUT_EN(gpio_config))
+			seq_puts(s, "output ");
+		if (ADM1266_GPIO_OPEN_DRAIN(gpio_config))
+			seq_puts(s, "open-drain )\n");
+		else
+			seq_puts(s, "push-pull )\n");
+	}
+
+	write_cmd = 0xFF;
+	ret = adm1266_pmbus_block_xfer(data, ADM1266_PDIO_CONFIG, 1, &write_cmd, read_buf);
+	if (ret != 32)
+		return;
+
+	for (i = 0; i < ADM1266_PDIO_NR; i++) {
+		seq_puts(s, adm1266_names[ADM1266_GPIO_NR + i]);
+
+		pdio_config = read_buf[2 * i];
+		pdio_config += (read_buf[2 * i + 1] << 8);
+		pin_cfg = ADM1266_PDIO_PIN_CFG(pdio_config);
+
+		seq_puts(s, " ( ");
+		if (!pin_cfg || pin_cfg > 5) {
+			seq_puts(s, "high-Z )\n");
+			continue;
+		}
+
+		if (pin_cfg & BIT(0))
+			seq_puts(s, "output ");
+
+		if (pin_cfg & BIT(1))
+			seq_puts(s, "input ");
+
+		seq_puts(s, ")\n");
+	}
+}
+
+static int adm1266_config_gpio(struct adm1266_data *data)
+{
+	const char *name = dev_name(&data->client->dev);
+	char *gpio_name;
+	int ret;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(data->gpio_names); i++) {
+		gpio_name = devm_kasprintf(&data->client->dev, GFP_KERNEL, "adm1266-%x-%s",
+					   data->client->addr, adm1266_names[i]);
+		if (!gpio_name)
+			return -ENOMEM;
+
+		data->gpio_names[i] = gpio_name;
+	}
+
+	data->gc.label = name;
+	data->gc.parent = &data->client->dev;
+	data->gc.owner = THIS_MODULE;
+	data->gc.can_sleep = true;
+	data->gc.base = -1;
+	data->gc.names = data->gpio_names;
+	data->gc.ngpio = ARRAY_SIZE(data->gpio_names);
+	data->gc.get = adm1266_gpio_get;
+	data->gc.get_multiple = adm1266_gpio_get_multiple;
+	data->gc.dbg_show = adm1266_gpio_dbg_show;
+
+	ret = devm_gpiochip_add_data(&data->client->dev, &data->gc, data);
+	if (ret)
+		dev_err(&data->client->dev, "GPIO registering failed (%d)\n", ret);
+
+	return ret;
+}
+
+static int adm1266_state_read(struct seq_file *s, void *pdata)
+{
+	struct device *dev = s->private;
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret;
+
+	ret = i2c_smbus_read_word_data(client, ADM1266_READ_STATE);
+	if (ret < 0)
+		return ret;
+
+	seq_printf(s, "%d\n", ret);
+
+	return 0;
+}
+
+static void adm1266_init_debugfs(struct adm1266_data *data)
+{
+	struct dentry *root;
+
+	root = pmbus_get_debugfs_dir(data->client);
+	if (!root)
+		return;
+
+	data->debugfs_dir = debugfs_create_dir(data->client->name, root);
+	if (!data->debugfs_dir)
+		return;
+
+	debugfs_create_devm_seqfile(&data->client->dev, "sequencer_state", data->debugfs_dir,
+				    adm1266_state_read);
+}
+
+static int adm1266_nvmem_read_blackbox(struct adm1266_data *data, u8 *read_buff)
+{
+	int record_count;
+	char index;
+	u8 buf[5];
+	int ret;
+
+	ret = i2c_smbus_read_block_data(data->client, ADM1266_BLACKBOX_INFO, buf);
+	if (ret < 0)
+		return ret;
+
+	if (ret != 4)
+		return -EIO;
+
+	record_count = buf[3];
+
+	for (index = 0; index < record_count; index++) {
+		ret = adm1266_pmbus_block_xfer(data, ADM1266_READ_BLACKBOX, 1, &index, read_buff);
+		if (ret < 0)
+			return ret;
+
+		if (ret != ADM1266_BLACKBOX_SIZE)
+			return -EIO;
+
+		read_buff += ADM1266_BLACKBOX_SIZE;
+	}
+
+	return 0;
+}
+
+static int adm1266_nvmem_read(void *priv, unsigned int offset, void *val, size_t bytes)
+{
+	struct adm1266_data *data = priv;
+	int ret;
+
+	if (offset + bytes > data->nvmem_config.size)
+		return -EINVAL;
+
+	if (offset == 0) {
+		memset(data->dev_mem, 0, data->nvmem_config.size);
+
+		ret = adm1266_nvmem_read_blackbox(data, data->dev_mem);
+		if (ret) {
+			dev_err(&data->client->dev, "Could not read blackbox!");
+			return ret;
+		}
+	}
+
+	memcpy(val, data->dev_mem + offset, bytes);
+
+	return 0;
+}
+
+static int adm1266_config_nvmem(struct adm1266_data *data)
+{
+	data->nvmem_config.name = dev_name(&data->client->dev);
+	data->nvmem_config.dev = &data->client->dev;
+	data->nvmem_config.root_only = true;
+	data->nvmem_config.read_only = true;
+	data->nvmem_config.owner = THIS_MODULE;
+	data->nvmem_config.reg_read = adm1266_nvmem_read;
+	data->nvmem_config.cells = adm1266_nvmem_cells;
+	data->nvmem_config.ncells = ARRAY_SIZE(adm1266_nvmem_cells);
+	data->nvmem_config.priv = data;
+	data->nvmem_config.stride = 1;
+	data->nvmem_config.word_size = 1;
+	data->nvmem_config.size = adm1266_nvmem_cells[0].bytes;
+
+	data->dev_mem = devm_kzalloc(&data->client->dev, data->nvmem_config.size, GFP_KERNEL);
+	if (!data->dev_mem)
+		return -ENOMEM;
+
+	data->nvmem = devm_nvmem_register(&data->client->dev, &data->nvmem_config);
+	if (IS_ERR(data->nvmem)) {
+		dev_err(&data->client->dev, "Could not register nvmem!");
+		return PTR_ERR(data->nvmem);
+	}
+
+	return 0;
+}
+
+static int adm1266_set_rtc(struct adm1266_data *data)
+{
+	time64_t kt;
+	char write_buf[6];
+	int i;
+
+	kt = ktime_get_seconds();
+
+	memset(write_buf, 0, sizeof(write_buf));
+
+	for (i = 0; i < 4; i++)
+		write_buf[2 + i] = (kt >> (i * 8)) & 0xFF;
+
+	return i2c_smbus_write_block_data(data->client, ADM1266_SET_RTC, sizeof(write_buf),
+					  write_buf);
+}
+
+static int adm1266_probe(struct i2c_client *client)
+{
+	struct adm1266_data *data;
+	int ret;
+	int i;
+
+	data = devm_kzalloc(&client->dev, sizeof(struct adm1266_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->client = client;
+	data->info.pages = 17;
+	data->info.format[PSC_VOLTAGE_OUT] = linear;
+	for (i = 0; i < data->info.pages; i++)
+		data->info.func[i] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
+
+	crc8_populate_msb(pmbus_crc_table, 0x7);
+	mutex_init(&data->buf_mutex);
+
+	ret = adm1266_config_gpio(data);
+	if (ret < 0)
+		return ret;
+
+	ret = adm1266_set_rtc(data);
+	if (ret < 0)
+		return ret;
+
+	ret = adm1266_config_nvmem(data);
+	if (ret < 0)
+		return ret;
+
+	ret = pmbus_do_probe(client, &data->info);
+	if (ret)
+		return ret;
+
+	adm1266_init_debugfs(data);
+
+	return 0;
+}
+
+static const struct of_device_id adm1266_of_match[] = {
+	{ .compatible = "adi,adm1266" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, adm1266_of_match);
+
+static const struct i2c_device_id adm1266_id[] = {
+	{ "adm1266", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, adm1266_id);
+
+static struct i2c_driver adm1266_driver = {
+	.driver = {
+		   .name = "adm1266",
+		   .of_match_table = adm1266_of_match,
+		  },
+	.probe_new = adm1266_probe,
+	.id_table = adm1266_id,
+};
+
+module_i2c_driver(adm1266_driver);
+
+MODULE_AUTHOR("Alexandru Tachici <alexandru.tachici@analog.com>");
+MODULE_DESCRIPTION("PMBus driver for Analog Devices ADM1266");
+MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c
new file mode 100644
index 000000000..b8543c06d
--- /dev/null
+++ b/drivers/hwmon/pmbus/adm1275.c
@@ -0,0 +1,844 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Hardware monitoring driver for Analog Devices ADM1275 Hot-Swap Controller
+ * and Digital Power Monitor
+ *
+ * Copyright (c) 2011 Ericsson AB.
+ * Copyright (c) 2018 Guenter Roeck
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/bitops.h>
+#include <linux/bitfield.h>
+#include <linux/log2.h>
+#include "pmbus.h"
+
+enum chips { adm1075, adm1272, adm1275, adm1276, adm1278, adm1293, adm1294 };
+
+#define ADM1275_MFR_STATUS_IOUT_WARN2	BIT(0)
+#define ADM1293_MFR_STATUS_VAUX_UV_WARN	BIT(5)
+#define ADM1293_MFR_STATUS_VAUX_OV_WARN	BIT(6)
+
+#define ADM1275_PEAK_IOUT		0xd0
+#define ADM1275_PEAK_VIN		0xd1
+#define ADM1275_PEAK_VOUT		0xd2
+#define ADM1275_PMON_CONFIG		0xd4
+
+#define ADM1275_VIN_VOUT_SELECT		BIT(6)
+#define ADM1275_VRANGE			BIT(5)
+#define ADM1075_IRANGE_50		BIT(4)
+#define ADM1075_IRANGE_25		BIT(3)
+#define ADM1075_IRANGE_MASK		(BIT(3) | BIT(4))
+
+#define ADM1272_IRANGE			BIT(0)
+
+#define ADM1278_TSFILT			BIT(15)
+#define ADM1278_TEMP1_EN		BIT(3)
+#define ADM1278_VIN_EN			BIT(2)
+#define ADM1278_VOUT_EN			BIT(1)
+
+#define ADM1278_PMON_DEFCONFIG		(ADM1278_VOUT_EN | ADM1278_TEMP1_EN | ADM1278_TSFILT)
+
+#define ADM1293_IRANGE_25		0
+#define ADM1293_IRANGE_50		BIT(6)
+#define ADM1293_IRANGE_100		BIT(7)
+#define ADM1293_IRANGE_200		(BIT(6) | BIT(7))
+#define ADM1293_IRANGE_MASK		(BIT(6) | BIT(7))
+
+#define ADM1293_VIN_SEL_012		BIT(2)
+#define ADM1293_VIN_SEL_074		BIT(3)
+#define ADM1293_VIN_SEL_210		(BIT(2) | BIT(3))
+#define ADM1293_VIN_SEL_MASK		(BIT(2) | BIT(3))
+
+#define ADM1293_VAUX_EN			BIT(1)
+
+#define ADM1278_PEAK_TEMP		0xd7
+#define ADM1275_IOUT_WARN2_LIMIT	0xd7
+#define ADM1275_DEVICE_CONFIG		0xd8
+
+#define ADM1275_IOUT_WARN2_SELECT	BIT(4)
+
+#define ADM1276_PEAK_PIN		0xda
+#define ADM1075_READ_VAUX		0xdd
+#define ADM1075_VAUX_OV_WARN_LIMIT	0xde
+#define ADM1075_VAUX_UV_WARN_LIMIT	0xdf
+#define ADM1293_IOUT_MIN		0xe3
+#define ADM1293_PIN_MIN			0xe4
+#define ADM1075_VAUX_STATUS		0xf6
+
+#define ADM1075_VAUX_OV_WARN		BIT(7)
+#define ADM1075_VAUX_UV_WARN		BIT(6)
+
+#define ADM1275_VI_AVG_SHIFT		0
+#define ADM1275_VI_AVG_MASK		GENMASK(ADM1275_VI_AVG_SHIFT + 2, \
+						ADM1275_VI_AVG_SHIFT)
+#define ADM1275_SAMPLES_AVG_MAX		128
+
+#define ADM1278_PWR_AVG_SHIFT		11
+#define ADM1278_PWR_AVG_MASK		GENMASK(ADM1278_PWR_AVG_SHIFT + 2, \
+						ADM1278_PWR_AVG_SHIFT)
+#define ADM1278_VI_AVG_SHIFT		8
+#define ADM1278_VI_AVG_MASK		GENMASK(ADM1278_VI_AVG_SHIFT + 2, \
+						ADM1278_VI_AVG_SHIFT)
+
+struct adm1275_data {
+	int id;
+	bool have_oc_fault;
+	bool have_uc_fault;
+	bool have_vout;
+	bool have_vaux_status;
+	bool have_mfr_vaux_status;
+	bool have_iout_min;
+	bool have_pin_min;
+	bool have_pin_max;
+	bool have_temp_max;
+	bool have_power_sampling;
+	struct pmbus_driver_info info;
+};
+
+#define to_adm1275_data(x)  container_of(x, struct adm1275_data, info)
+
+struct coefficients {
+	s16 m;
+	s16 b;
+	s16 R;
+};
+
+static const struct coefficients adm1075_coefficients[] = {
+	[0] = { 27169, 0, -1 },		/* voltage */
+	[1] = { 806, 20475, -1 },	/* current, irange25 */
+	[2] = { 404, 20475, -1 },	/* current, irange50 */
+	[3] = { 8549, 0, -1 },		/* power, irange25 */
+	[4] = { 4279, 0, -1 },		/* power, irange50 */
+};
+
+static const struct coefficients adm1272_coefficients[] = {
+	[0] = { 6770, 0, -2 },		/* voltage, vrange 60V */
+	[1] = { 4062, 0, -2 },		/* voltage, vrange 100V */
+	[2] = { 1326, 20480, -1 },	/* current, vsense range 15mV */
+	[3] = { 663, 20480, -1 },	/* current, vsense range 30mV */
+	[4] = { 3512, 0, -2 },		/* power, vrange 60V, irange 15mV */
+	[5] = { 21071, 0, -3 },		/* power, vrange 100V, irange 15mV */
+	[6] = { 17561, 0, -3 },		/* power, vrange 60V, irange 30mV */
+	[7] = { 10535, 0, -3 },		/* power, vrange 100V, irange 30mV */
+	[8] = { 42, 31871, -1 },	/* temperature */
+
+};
+
+static const struct coefficients adm1275_coefficients[] = {
+	[0] = { 19199, 0, -2 },		/* voltage, vrange set */
+	[1] = { 6720, 0, -1 },		/* voltage, vrange not set */
+	[2] = { 807, 20475, -1 },	/* current */
+};
+
+static const struct coefficients adm1276_coefficients[] = {
+	[0] = { 19199, 0, -2 },		/* voltage, vrange set */
+	[1] = { 6720, 0, -1 },		/* voltage, vrange not set */
+	[2] = { 807, 20475, -1 },	/* current */
+	[3] = { 6043, 0, -2 },		/* power, vrange set */
+	[4] = { 2115, 0, -1 },		/* power, vrange not set */
+};
+
+static const struct coefficients adm1278_coefficients[] = {
+	[0] = { 19599, 0, -2 },		/* voltage */
+	[1] = { 800, 20475, -1 },	/* current */
+	[2] = { 6123, 0, -2 },		/* power */
+	[3] = { 42, 31880, -1 },	/* temperature */
+};
+
+static const struct coefficients adm1293_coefficients[] = {
+	[0] = { 3333, -1, 0 },		/* voltage, vrange 1.2V */
+	[1] = { 5552, -5, -1 },		/* voltage, vrange 7.4V */
+	[2] = { 19604, -50, -2 },	/* voltage, vrange 21V */
+	[3] = { 8000, -100, -2 },	/* current, irange25 */
+	[4] = { 4000, -100, -2 },	/* current, irange50 */
+	[5] = { 20000, -1000, -3 },	/* current, irange100 */
+	[6] = { 10000, -1000, -3 },	/* current, irange200 */
+	[7] = { 10417, 0, -1 },		/* power, 1.2V, irange25 */
+	[8] = { 5208, 0, -1 },		/* power, 1.2V, irange50 */
+	[9] = { 26042, 0, -2 },		/* power, 1.2V, irange100 */
+	[10] = { 13021, 0, -2 },	/* power, 1.2V, irange200 */
+	[11] = { 17351, 0, -2 },	/* power, 7.4V, irange25 */
+	[12] = { 8676, 0, -2 },		/* power, 7.4V, irange50 */
+	[13] = { 4338, 0, -2 },		/* power, 7.4V, irange100 */
+	[14] = { 21689, 0, -3 },	/* power, 7.4V, irange200 */
+	[15] = { 6126, 0, -2 },		/* power, 21V, irange25 */
+	[16] = { 30631, 0, -3 },	/* power, 21V, irange50 */
+	[17] = { 15316, 0, -3 },	/* power, 21V, irange100 */
+	[18] = { 7658, 0, -3 },		/* power, 21V, irange200 */
+};
+
+static int adm1275_read_pmon_config(const struct adm1275_data *data,
+				    struct i2c_client *client, bool is_power)
+{
+	int shift, ret;
+	u16 mask;
+
+	/*
+	 * The PMON configuration register is a 16-bit register only on chips
+	 * supporting power average sampling. On other chips it is an 8-bit
+	 * register.
+	 */
+	if (data->have_power_sampling) {
+		ret = i2c_smbus_read_word_data(client, ADM1275_PMON_CONFIG);
+		mask = is_power ? ADM1278_PWR_AVG_MASK : ADM1278_VI_AVG_MASK;
+		shift = is_power ? ADM1278_PWR_AVG_SHIFT : ADM1278_VI_AVG_SHIFT;
+	} else {
+		ret = i2c_smbus_read_byte_data(client, ADM1275_PMON_CONFIG);
+		mask = ADM1275_VI_AVG_MASK;
+		shift = ADM1275_VI_AVG_SHIFT;
+	}
+	if (ret < 0)
+		return ret;
+
+	return (ret & mask) >> shift;
+}
+
+static int adm1275_write_pmon_config(const struct adm1275_data *data,
+				     struct i2c_client *client,
+				     bool is_power, u16 word)
+{
+	int shift, ret;
+	u16 mask;
+
+	if (data->have_power_sampling) {
+		ret = i2c_smbus_read_word_data(client, ADM1275_PMON_CONFIG);
+		mask = is_power ? ADM1278_PWR_AVG_MASK : ADM1278_VI_AVG_MASK;
+		shift = is_power ? ADM1278_PWR_AVG_SHIFT : ADM1278_VI_AVG_SHIFT;
+	} else {
+		ret = i2c_smbus_read_byte_data(client, ADM1275_PMON_CONFIG);
+		mask = ADM1275_VI_AVG_MASK;
+		shift = ADM1275_VI_AVG_SHIFT;
+	}
+	if (ret < 0)
+		return ret;
+
+	word = (ret & ~mask) | ((word << shift) & mask);
+	if (data->have_power_sampling)
+		ret = i2c_smbus_write_word_data(client, ADM1275_PMON_CONFIG,
+						word);
+	else
+		ret = i2c_smbus_write_byte_data(client, ADM1275_PMON_CONFIG,
+						word);
+
+	return ret;
+}
+
+static int adm1275_read_word_data(struct i2c_client *client, int page,
+				  int phase, int reg)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	const struct adm1275_data *data = to_adm1275_data(info);
+	int ret = 0;
+
+	if (page > 0)
+		return -ENXIO;
+
+	switch (reg) {
+	case PMBUS_IOUT_UC_FAULT_LIMIT:
+		if (!data->have_uc_fault)
+			return -ENXIO;
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   ADM1275_IOUT_WARN2_LIMIT);
+		break;
+	case PMBUS_IOUT_OC_FAULT_LIMIT:
+		if (!data->have_oc_fault)
+			return -ENXIO;
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   ADM1275_IOUT_WARN2_LIMIT);
+		break;
+	case PMBUS_VOUT_OV_WARN_LIMIT:
+		if (data->have_vout)
+			return -ENODATA;
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   ADM1075_VAUX_OV_WARN_LIMIT);
+		break;
+	case PMBUS_VOUT_UV_WARN_LIMIT:
+		if (data->have_vout)
+			return -ENODATA;
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   ADM1075_VAUX_UV_WARN_LIMIT);
+		break;
+	case PMBUS_READ_VOUT:
+		if (data->have_vout)
+			return -ENODATA;
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   ADM1075_READ_VAUX);
+		break;
+	case PMBUS_VIRT_READ_IOUT_MIN:
+		if (!data->have_iout_min)
+			return -ENXIO;
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   ADM1293_IOUT_MIN);
+		break;
+	case PMBUS_VIRT_READ_IOUT_MAX:
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   ADM1275_PEAK_IOUT);
+		break;
+	case PMBUS_VIRT_READ_VOUT_MAX:
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   ADM1275_PEAK_VOUT);
+		break;
+	case PMBUS_VIRT_READ_VIN_MAX:
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   ADM1275_PEAK_VIN);
+		break;
+	case PMBUS_VIRT_READ_PIN_MIN:
+		if (!data->have_pin_min)
+			return -ENXIO;
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   ADM1293_PIN_MIN);
+		break;
+	case PMBUS_VIRT_READ_PIN_MAX:
+		if (!data->have_pin_max)
+			return -ENXIO;
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   ADM1276_PEAK_PIN);
+		break;
+	case PMBUS_VIRT_READ_TEMP_MAX:
+		if (!data->have_temp_max)
+			return -ENXIO;
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   ADM1278_PEAK_TEMP);
+		break;
+	case PMBUS_VIRT_RESET_IOUT_HISTORY:
+	case PMBUS_VIRT_RESET_VOUT_HISTORY:
+	case PMBUS_VIRT_RESET_VIN_HISTORY:
+		break;
+	case PMBUS_VIRT_RESET_PIN_HISTORY:
+		if (!data->have_pin_max)
+			return -ENXIO;
+		break;
+	case PMBUS_VIRT_RESET_TEMP_HISTORY:
+		if (!data->have_temp_max)
+			return -ENXIO;
+		break;
+	case PMBUS_VIRT_POWER_SAMPLES:
+		if (!data->have_power_sampling)
+			return -ENXIO;
+		ret = adm1275_read_pmon_config(data, client, true);
+		if (ret < 0)
+			break;
+		ret = BIT(ret);
+		break;
+	case PMBUS_VIRT_IN_SAMPLES:
+	case PMBUS_VIRT_CURR_SAMPLES:
+		ret = adm1275_read_pmon_config(data, client, false);
+		if (ret < 0)
+			break;
+		ret = BIT(ret);
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
+static int adm1275_write_word_data(struct i2c_client *client, int page, int reg,
+				   u16 word)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	const struct adm1275_data *data = to_adm1275_data(info);
+	int ret;
+
+	if (page > 0)
+		return -ENXIO;
+
+	switch (reg) {
+	case PMBUS_IOUT_UC_FAULT_LIMIT:
+	case PMBUS_IOUT_OC_FAULT_LIMIT:
+		ret = pmbus_write_word_data(client, 0, ADM1275_IOUT_WARN2_LIMIT,
+					    word);
+		break;
+	case PMBUS_VIRT_RESET_IOUT_HISTORY:
+		ret = pmbus_write_word_data(client, 0, ADM1275_PEAK_IOUT, 0);
+		if (!ret && data->have_iout_min)
+			ret = pmbus_write_word_data(client, 0,
+						    ADM1293_IOUT_MIN, 0);
+		break;
+	case PMBUS_VIRT_RESET_VOUT_HISTORY:
+		ret = pmbus_write_word_data(client, 0, ADM1275_PEAK_VOUT, 0);
+		break;
+	case PMBUS_VIRT_RESET_VIN_HISTORY:
+		ret = pmbus_write_word_data(client, 0, ADM1275_PEAK_VIN, 0);
+		break;
+	case PMBUS_VIRT_RESET_PIN_HISTORY:
+		ret = pmbus_write_word_data(client, 0, ADM1276_PEAK_PIN, 0);
+		if (!ret && data->have_pin_min)
+			ret = pmbus_write_word_data(client, 0,
+						    ADM1293_PIN_MIN, 0);
+		break;
+	case PMBUS_VIRT_RESET_TEMP_HISTORY:
+		ret = pmbus_write_word_data(client, 0, ADM1278_PEAK_TEMP, 0);
+		break;
+	case PMBUS_VIRT_POWER_SAMPLES:
+		if (!data->have_power_sampling)
+			return -ENXIO;
+		word = clamp_val(word, 1, ADM1275_SAMPLES_AVG_MAX);
+		ret = adm1275_write_pmon_config(data, client, true,
+						ilog2(word));
+		break;
+	case PMBUS_VIRT_IN_SAMPLES:
+	case PMBUS_VIRT_CURR_SAMPLES:
+		word = clamp_val(word, 1, ADM1275_SAMPLES_AVG_MAX);
+		ret = adm1275_write_pmon_config(data, client, false,
+						ilog2(word));
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
+static int adm1275_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	const struct adm1275_data *data = to_adm1275_data(info);
+	int mfr_status, ret;
+
+	if (page > 0)
+		return -ENXIO;
+
+	switch (reg) {
+	case PMBUS_STATUS_IOUT:
+		ret = pmbus_read_byte_data(client, page, PMBUS_STATUS_IOUT);
+		if (ret < 0)
+			break;
+		if (!data->have_oc_fault && !data->have_uc_fault)
+			break;
+		mfr_status = pmbus_read_byte_data(client, page,
+						  PMBUS_STATUS_MFR_SPECIFIC);
+		if (mfr_status < 0)
+			return mfr_status;
+		if (mfr_status & ADM1275_MFR_STATUS_IOUT_WARN2) {
+			ret |= data->have_oc_fault ?
+			  PB_IOUT_OC_FAULT : PB_IOUT_UC_FAULT;
+		}
+		break;
+	case PMBUS_STATUS_VOUT:
+		if (data->have_vout)
+			return -ENODATA;
+		ret = 0;
+		if (data->have_vaux_status) {
+			mfr_status = pmbus_read_byte_data(client, 0,
+							  ADM1075_VAUX_STATUS);
+			if (mfr_status < 0)
+				return mfr_status;
+			if (mfr_status & ADM1075_VAUX_OV_WARN)
+				ret |= PB_VOLTAGE_OV_WARNING;
+			if (mfr_status & ADM1075_VAUX_UV_WARN)
+				ret |= PB_VOLTAGE_UV_WARNING;
+		} else if (data->have_mfr_vaux_status) {
+			mfr_status = pmbus_read_byte_data(client, page,
+						PMBUS_STATUS_MFR_SPECIFIC);
+			if (mfr_status < 0)
+				return mfr_status;
+			if (mfr_status & ADM1293_MFR_STATUS_VAUX_OV_WARN)
+				ret |= PB_VOLTAGE_OV_WARNING;
+			if (mfr_status & ADM1293_MFR_STATUS_VAUX_UV_WARN)
+				ret |= PB_VOLTAGE_UV_WARNING;
+		}
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
+static const struct i2c_device_id adm1275_id[] = {
+	{ "adm1075", adm1075 },
+	{ "adm1272", adm1272 },
+	{ "adm1275", adm1275 },
+	{ "adm1276", adm1276 },
+	{ "adm1278", adm1278 },
+	{ "adm1293", adm1293 },
+	{ "adm1294", adm1294 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, adm1275_id);
+
+/* Enable VOUT & TEMP1 if not enabled (disabled by default) */
+static int adm1275_enable_vout_temp(struct i2c_client *client, int config)
+{
+	int ret;
+
+	if ((config & ADM1278_PMON_DEFCONFIG) != ADM1278_PMON_DEFCONFIG) {
+		config |= ADM1278_PMON_DEFCONFIG;
+		ret = i2c_smbus_write_word_data(client, ADM1275_PMON_CONFIG, config);
+		if (ret < 0) {
+			dev_err(&client->dev, "Failed to enable VOUT/TEMP1 monitoring\n");
+			return ret;
+		}
+	}
+	return 0;
+}
+
+static int adm1275_probe(struct i2c_client *client)
+{
+	s32 (*config_read_fn)(const struct i2c_client *client, u8 reg);
+	u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1];
+	int config, device_config;
+	int ret;
+	struct pmbus_driver_info *info;
+	struct adm1275_data *data;
+	const struct i2c_device_id *mid;
+	const struct coefficients *coefficients;
+	int vindex = -1, voindex = -1, cindex = -1, pindex = -1;
+	int tindex = -1;
+	u32 shunt;
+	u32 avg;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_READ_BYTE_DATA
+				     | I2C_FUNC_SMBUS_BLOCK_DATA))
+		return -ENODEV;
+
+	ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, block_buffer);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to read Manufacturer ID\n");
+		return ret;
+	}
+	if (ret != 3 || strncmp(block_buffer, "ADI", 3)) {
+		dev_err(&client->dev, "Unsupported Manufacturer ID\n");
+		return -ENODEV;
+	}
+
+	ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, block_buffer);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to read Manufacturer Model\n");
+		return ret;
+	}
+	for (mid = adm1275_id; mid->name[0]; mid++) {
+		if (!strncasecmp(mid->name, block_buffer, strlen(mid->name)))
+			break;
+	}
+	if (!mid->name[0]) {
+		dev_err(&client->dev, "Unsupported device\n");
+		return -ENODEV;
+	}
+
+	if (strcmp(client->name, mid->name) != 0)
+		dev_notice(&client->dev,
+			   "Device mismatch: Configured %s, detected %s\n",
+			   client->name, mid->name);
+
+	if (mid->driver_data == adm1272 || mid->driver_data == adm1278 ||
+	    mid->driver_data == adm1293 || mid->driver_data == adm1294)
+		config_read_fn = i2c_smbus_read_word_data;
+	else
+		config_read_fn = i2c_smbus_read_byte_data;
+	config = config_read_fn(client, ADM1275_PMON_CONFIG);
+	if (config < 0)
+		return config;
+
+	device_config = config_read_fn(client, ADM1275_DEVICE_CONFIG);
+	if (device_config < 0)
+		return device_config;
+
+	data = devm_kzalloc(&client->dev, sizeof(struct adm1275_data),
+			    GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	if (of_property_read_u32(client->dev.of_node,
+				 "shunt-resistor-micro-ohms", &shunt))
+		shunt = 1000; /* 1 mOhm if not set via DT */
+
+	if (shunt == 0)
+		return -EINVAL;
+
+	data->id = mid->driver_data;
+
+	info = &data->info;
+
+	info->pages = 1;
+	info->format[PSC_VOLTAGE_IN] = direct;
+	info->format[PSC_VOLTAGE_OUT] = direct;
+	info->format[PSC_CURRENT_OUT] = direct;
+	info->format[PSC_POWER] = direct;
+	info->format[PSC_TEMPERATURE] = direct;
+	info->func[0] = PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+			PMBUS_HAVE_SAMPLES;
+
+	info->read_word_data = adm1275_read_word_data;
+	info->read_byte_data = adm1275_read_byte_data;
+	info->write_word_data = adm1275_write_word_data;
+
+	switch (data->id) {
+	case adm1075:
+		if (device_config & ADM1275_IOUT_WARN2_SELECT)
+			data->have_oc_fault = true;
+		else
+			data->have_uc_fault = true;
+		data->have_pin_max = true;
+		data->have_vaux_status = true;
+
+		coefficients = adm1075_coefficients;
+		vindex = 0;
+		switch (config & ADM1075_IRANGE_MASK) {
+		case ADM1075_IRANGE_25:
+			cindex = 1;
+			pindex = 3;
+			break;
+		case ADM1075_IRANGE_50:
+			cindex = 2;
+			pindex = 4;
+			break;
+		default:
+			dev_err(&client->dev, "Invalid input current range");
+			break;
+		}
+
+		info->func[0] |= PMBUS_HAVE_VIN | PMBUS_HAVE_PIN
+		  | PMBUS_HAVE_STATUS_INPUT;
+		if (config & ADM1275_VIN_VOUT_SELECT)
+			info->func[0] |=
+			  PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
+		break;
+	case adm1272:
+		data->have_vout = true;
+		data->have_pin_max = true;
+		data->have_temp_max = true;
+		data->have_power_sampling = true;
+
+		coefficients = adm1272_coefficients;
+		vindex = (config & ADM1275_VRANGE) ? 1 : 0;
+		cindex = (config & ADM1272_IRANGE) ? 3 : 2;
+		/* pindex depends on the combination of the above */
+		switch (config & (ADM1275_VRANGE | ADM1272_IRANGE)) {
+		case 0:
+		default:
+			pindex = 4;
+			break;
+		case ADM1275_VRANGE:
+			pindex = 5;
+			break;
+		case ADM1272_IRANGE:
+			pindex = 6;
+			break;
+		case ADM1275_VRANGE | ADM1272_IRANGE:
+			pindex = 7;
+			break;
+		}
+		tindex = 8;
+
+		info->func[0] |= PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT |
+			PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+			PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
+
+		ret = adm1275_enable_vout_temp(client, config);
+		if (ret)
+			return ret;
+
+		if (config & ADM1278_VIN_EN)
+			info->func[0] |= PMBUS_HAVE_VIN;
+		break;
+	case adm1275:
+		if (device_config & ADM1275_IOUT_WARN2_SELECT)
+			data->have_oc_fault = true;
+		else
+			data->have_uc_fault = true;
+		data->have_vout = true;
+
+		coefficients = adm1275_coefficients;
+		vindex = (config & ADM1275_VRANGE) ? 0 : 1;
+		cindex = 2;
+
+		if (config & ADM1275_VIN_VOUT_SELECT)
+			info->func[0] |=
+			  PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
+		else
+			info->func[0] |=
+			  PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT;
+		break;
+	case adm1276:
+		if (device_config & ADM1275_IOUT_WARN2_SELECT)
+			data->have_oc_fault = true;
+		else
+			data->have_uc_fault = true;
+		data->have_vout = true;
+		data->have_pin_max = true;
+
+		coefficients = adm1276_coefficients;
+		vindex = (config & ADM1275_VRANGE) ? 0 : 1;
+		cindex = 2;
+		pindex = (config & ADM1275_VRANGE) ? 3 : 4;
+
+		info->func[0] |= PMBUS_HAVE_VIN | PMBUS_HAVE_PIN
+		  | PMBUS_HAVE_STATUS_INPUT;
+		if (config & ADM1275_VIN_VOUT_SELECT)
+			info->func[0] |=
+			  PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
+		break;
+	case adm1278:
+		data->have_vout = true;
+		data->have_pin_max = true;
+		data->have_temp_max = true;
+		data->have_power_sampling = true;
+
+		coefficients = adm1278_coefficients;
+		vindex = 0;
+		cindex = 1;
+		pindex = 2;
+		tindex = 3;
+
+		info->func[0] |= PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT |
+			PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+			PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
+
+		ret = adm1275_enable_vout_temp(client, config);
+		if (ret)
+			return ret;
+
+		if (config & ADM1278_VIN_EN)
+			info->func[0] |= PMBUS_HAVE_VIN;
+		break;
+	case adm1293:
+	case adm1294:
+		data->have_iout_min = true;
+		data->have_pin_min = true;
+		data->have_pin_max = true;
+		data->have_mfr_vaux_status = true;
+		data->have_power_sampling = true;
+
+		coefficients = adm1293_coefficients;
+
+		voindex = 0;
+		switch (config & ADM1293_VIN_SEL_MASK) {
+		case ADM1293_VIN_SEL_012:	/* 1.2V */
+			vindex = 0;
+			break;
+		case ADM1293_VIN_SEL_074:	/* 7.4V */
+			vindex = 1;
+			break;
+		case ADM1293_VIN_SEL_210:	/* 21V */
+			vindex = 2;
+			break;
+		default:			/* disabled */
+			break;
+		}
+
+		switch (config & ADM1293_IRANGE_MASK) {
+		case ADM1293_IRANGE_25:
+			cindex = 3;
+			break;
+		case ADM1293_IRANGE_50:
+			cindex = 4;
+			break;
+		case ADM1293_IRANGE_100:
+			cindex = 5;
+			break;
+		case ADM1293_IRANGE_200:
+			cindex = 6;
+			break;
+		}
+
+		if (vindex >= 0)
+			pindex = 7 + vindex * 4 + (cindex - 3);
+
+		if (config & ADM1293_VAUX_EN)
+			info->func[0] |=
+				PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
+
+		info->func[0] |= PMBUS_HAVE_PIN |
+			PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT;
+
+		break;
+	default:
+		dev_err(&client->dev, "Unsupported device\n");
+		return -ENODEV;
+	}
+
+	if (data->have_power_sampling &&
+	    of_property_read_u32(client->dev.of_node,
+				 "adi,power-sample-average", &avg) == 0) {
+		if (!avg || avg > ADM1275_SAMPLES_AVG_MAX ||
+		    BIT(__fls(avg)) != avg) {
+			dev_err(&client->dev,
+				"Invalid number of power samples");
+			return -EINVAL;
+		}
+		ret = adm1275_write_pmon_config(data, client, true,
+						ilog2(avg));
+		if (ret < 0) {
+			dev_err(&client->dev,
+				"Setting power sample averaging failed with error %d",
+				ret);
+			return ret;
+		}
+	}
+
+	if (of_property_read_u32(client->dev.of_node,
+				"adi,volt-curr-sample-average", &avg) == 0) {
+		if (!avg || avg > ADM1275_SAMPLES_AVG_MAX ||
+		    BIT(__fls(avg)) != avg) {
+			dev_err(&client->dev,
+				"Invalid number of voltage/current samples");
+			return -EINVAL;
+		}
+		ret = adm1275_write_pmon_config(data, client, false,
+						ilog2(avg));
+		if (ret < 0) {
+			dev_err(&client->dev,
+				"Setting voltage and current sample averaging failed with error %d",
+				ret);
+			return ret;
+		}
+	}
+
+	if (voindex < 0)
+		voindex = vindex;
+	if (vindex >= 0) {
+		info->m[PSC_VOLTAGE_IN] = coefficients[vindex].m;
+		info->b[PSC_VOLTAGE_IN] = coefficients[vindex].b;
+		info->R[PSC_VOLTAGE_IN] = coefficients[vindex].R;
+	}
+	if (voindex >= 0) {
+		info->m[PSC_VOLTAGE_OUT] = coefficients[voindex].m;
+		info->b[PSC_VOLTAGE_OUT] = coefficients[voindex].b;
+		info->R[PSC_VOLTAGE_OUT] = coefficients[voindex].R;
+	}
+	if (cindex >= 0) {
+		/* Scale current with sense resistor value */
+		info->m[PSC_CURRENT_OUT] =
+			coefficients[cindex].m * shunt / 1000;
+		info->b[PSC_CURRENT_OUT] = coefficients[cindex].b;
+		info->R[PSC_CURRENT_OUT] = coefficients[cindex].R;
+	}
+	if (pindex >= 0) {
+		info->m[PSC_POWER] =
+			coefficients[pindex].m * shunt / 1000;
+		info->b[PSC_POWER] = coefficients[pindex].b;
+		info->R[PSC_POWER] = coefficients[pindex].R;
+	}
+	if (tindex >= 0) {
+		info->m[PSC_TEMPERATURE] = coefficients[tindex].m;
+		info->b[PSC_TEMPERATURE] = coefficients[tindex].b;
+		info->R[PSC_TEMPERATURE] = coefficients[tindex].R;
+	}
+
+	return pmbus_do_probe(client, info);
+}
+
+static struct i2c_driver adm1275_driver = {
+	.driver = {
+		   .name = "adm1275",
+		   },
+	.probe_new = adm1275_probe,
+	.id_table = adm1275_id,
+};
+
+module_i2c_driver(adm1275_driver);
+
+MODULE_AUTHOR("Guenter Roeck");
+MODULE_DESCRIPTION("PMBus driver for Analog Devices ADM1275 and compatibles");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/bel-pfe.c b/drivers/hwmon/pmbus/bel-pfe.c
new file mode 100644
index 000000000..61c195f8f
--- /dev/null
+++ b/drivers/hwmon/pmbus/bel-pfe.c
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Hardware monitoring driver for BEL PFE family power supplies.
+ *
+ * Copyright (c) 2019 Facebook Inc.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pmbus.h>
+
+#include "pmbus.h"
+
+enum chips {pfe1100, pfe3000};
+
+/*
+ * Disable status check because some devices report communication error
+ * (invalid command) for VOUT_MODE command (0x20) although the correct
+ * VOUT_MODE (0x16) is returned: it leads to incorrect exponent in linear
+ * mode.
+ * This affects both pfe3000 and pfe1100.
+ */
+static struct pmbus_platform_data pfe_plat_data = {
+	.flags = PMBUS_SKIP_STATUS_CHECK,
+};
+
+static struct pmbus_driver_info pfe_driver_info[] = {
+	[pfe1100] = {
+		.pages = 1,
+		.format[PSC_VOLTAGE_IN] = linear,
+		.format[PSC_VOLTAGE_OUT] = linear,
+		.format[PSC_CURRENT_IN] = linear,
+		.format[PSC_CURRENT_OUT] = linear,
+		.format[PSC_POWER] = linear,
+		.format[PSC_TEMPERATURE] = linear,
+		.format[PSC_FAN] = linear,
+
+		.func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+			   PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+			   PMBUS_HAVE_POUT |
+			   PMBUS_HAVE_VIN | PMBUS_HAVE_IIN |
+			   PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT |
+			   PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 |
+			   PMBUS_HAVE_STATUS_TEMP |
+			   PMBUS_HAVE_FAN12,
+	},
+
+	[pfe3000] = {
+		.pages = 7,
+		.format[PSC_VOLTAGE_IN] = linear,
+		.format[PSC_VOLTAGE_OUT] = linear,
+		.format[PSC_CURRENT_IN] = linear,
+		.format[PSC_CURRENT_OUT] = linear,
+		.format[PSC_POWER] = linear,
+		.format[PSC_TEMPERATURE] = linear,
+		.format[PSC_FAN] = linear,
+
+		/* Page 0: V1. */
+		.func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+			   PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+			   PMBUS_HAVE_POUT | PMBUS_HAVE_FAN12 |
+			   PMBUS_HAVE_VIN | PMBUS_HAVE_IIN |
+			   PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT |
+			   PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 |
+			   PMBUS_HAVE_TEMP3 | PMBUS_HAVE_STATUS_TEMP |
+			   PMBUS_HAVE_VCAP,
+
+		/* Page 1: Vsb. */
+		.func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+			   PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+			   PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT |
+			   PMBUS_HAVE_POUT,
+
+		/*
+		 * Page 2: V1 Ishare.
+		 * Page 3: Reserved.
+		 * Page 4: V1 Cathode.
+		 * Page 5: Vsb Cathode.
+		 * Page 6: V1 Sense.
+		 */
+		.func[2] = PMBUS_HAVE_VOUT,
+		.func[4] = PMBUS_HAVE_VOUT,
+		.func[5] = PMBUS_HAVE_VOUT,
+		.func[6] = PMBUS_HAVE_VOUT,
+	},
+};
+
+static const struct i2c_device_id pfe_device_id[];
+
+static int pfe_pmbus_probe(struct i2c_client *client)
+{
+	int model;
+
+	model = (int)i2c_match_id(pfe_device_id, client)->driver_data;
+	client->dev.platform_data = &pfe_plat_data;
+
+	/*
+	 * PFE3000-12-069RA devices may not stay in page 0 during device
+	 * probe which leads to probe failure (read status word failed).
+	 * So let's set the device to page 0 at the beginning.
+	 */
+	if (model == pfe3000)
+		i2c_smbus_write_byte_data(client, PMBUS_PAGE, 0);
+
+	return pmbus_do_probe(client, &pfe_driver_info[model]);
+}
+
+static const struct i2c_device_id pfe_device_id[] = {
+	{"pfe1100", pfe1100},
+	{"pfe3000", pfe3000},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, pfe_device_id);
+
+static struct i2c_driver pfe_pmbus_driver = {
+	.driver = {
+		   .name = "bel-pfe",
+	},
+	.probe_new = pfe_pmbus_probe,
+	.id_table = pfe_device_id,
+};
+
+module_i2c_driver(pfe_pmbus_driver);
+
+MODULE_AUTHOR("Tao Ren <rentao.bupt@gmail.com>");
+MODULE_DESCRIPTION("PMBus driver for BEL PFE Family Power Supplies");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/bpa-rs600.c b/drivers/hwmon/pmbus/bpa-rs600.c
new file mode 100644
index 000000000..f2d4e378a
--- /dev/null
+++ b/drivers/hwmon/pmbus/bpa-rs600.c
@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Hardware monitoring driver for BluTek BPA-RS600 Power Supplies
+ *
+ * Copyright 2021 Allied Telesis Labs
+ */
+
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pmbus.h>
+#include "pmbus.h"
+
+enum chips { bpa_rs600, bpd_rs600 };
+
+static int bpa_rs600_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+	int ret;
+
+	if (page > 0)
+		return -ENXIO;
+
+	switch (reg) {
+	case PMBUS_FAN_CONFIG_12:
+		/*
+		 * Two fans are reported in PMBUS_FAN_CONFIG_12 but there is
+		 * only one fan in the module. Mask out the FAN2 bits.
+		 */
+		ret = pmbus_read_byte_data(client, 0, PMBUS_FAN_CONFIG_12);
+		if (ret >= 0)
+			ret &= ~(PB_FAN_2_INSTALLED | PB_FAN_2_PULSE_MASK);
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+
+	return ret;
+}
+
+/*
+ * The BPA-RS600 violates the PMBus spec. Specifically it treats the
+ * mantissa as unsigned. Deal with this here to allow the PMBus core
+ * to work with correctly encoded data.
+ */
+static int bpa_rs600_read_vin(struct i2c_client *client)
+{
+	int ret, exponent, mantissa;
+
+	ret = pmbus_read_word_data(client, 0, 0xff, PMBUS_READ_VIN);
+	if (ret < 0)
+		return ret;
+
+	if (ret & BIT(10)) {
+		exponent = ret >> 11;
+		mantissa = ret & 0x7ff;
+
+		exponent++;
+		mantissa >>= 1;
+
+		ret = (exponent << 11) | mantissa;
+	}
+
+	return ret;
+}
+
+/*
+ * Firmware V5.70 incorrectly reports 1640W for MFR_PIN_MAX.
+ * Deal with this by returning a sensible value.
+ */
+static int bpa_rs600_read_pin_max(struct i2c_client *client)
+{
+	int ret;
+
+	ret = pmbus_read_word_data(client, 0, 0xff, PMBUS_MFR_PIN_MAX);
+	if (ret < 0)
+		return ret;
+
+	/* Detect invalid 1640W (linear encoding) */
+	if (ret == 0x0b34)
+		/* Report 700W (linear encoding) */
+		return 0x095e;
+
+	return ret;
+}
+
+static int bpa_rs600_read_word_data(struct i2c_client *client, int page, int phase, int reg)
+{
+	int ret;
+
+	if (page > 0)
+		return -ENXIO;
+
+	switch (reg) {
+	case PMBUS_VIN_UV_WARN_LIMIT:
+	case PMBUS_VIN_OV_WARN_LIMIT:
+	case PMBUS_VOUT_UV_WARN_LIMIT:
+	case PMBUS_VOUT_OV_WARN_LIMIT:
+	case PMBUS_IIN_OC_WARN_LIMIT:
+	case PMBUS_IOUT_OC_WARN_LIMIT:
+	case PMBUS_PIN_OP_WARN_LIMIT:
+	case PMBUS_POUT_OP_WARN_LIMIT:
+	case PMBUS_VIN_UV_FAULT_LIMIT:
+	case PMBUS_VIN_OV_FAULT_LIMIT:
+	case PMBUS_VOUT_UV_FAULT_LIMIT:
+	case PMBUS_VOUT_OV_FAULT_LIMIT:
+		/* These commands return data but it is invalid/un-documented */
+		ret = -ENXIO;
+		break;
+	case PMBUS_READ_VIN:
+		ret = bpa_rs600_read_vin(client);
+		break;
+	case PMBUS_MFR_PIN_MAX:
+		ret = bpa_rs600_read_pin_max(client);
+		break;
+	default:
+		if (reg >= PMBUS_VIRT_BASE)
+			ret = -ENXIO;
+		else
+			ret = -ENODATA;
+		break;
+	}
+
+	return ret;
+}
+
+static struct pmbus_driver_info bpa_rs600_info = {
+	.pages = 1,
+	.format[PSC_VOLTAGE_IN] = linear,
+	.format[PSC_VOLTAGE_OUT] = linear,
+	.format[PSC_CURRENT_IN] = linear,
+	.format[PSC_CURRENT_OUT] = linear,
+	.format[PSC_POWER] = linear,
+	.format[PSC_TEMPERATURE] = linear,
+	.format[PSC_FAN] = linear,
+	.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT |
+		PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT |
+		PMBUS_HAVE_PIN | PMBUS_HAVE_POUT |
+		PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 |
+		PMBUS_HAVE_FAN12 |
+		PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT |
+		PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP |
+		PMBUS_HAVE_STATUS_FAN12,
+	.read_byte_data = bpa_rs600_read_byte_data,
+	.read_word_data = bpa_rs600_read_word_data,
+};
+
+static const struct i2c_device_id bpa_rs600_id[] = {
+	{ "bpa-rs600", bpa_rs600 },
+	{ "bpd-rs600", bpd_rs600 },
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, bpa_rs600_id);
+
+static int bpa_rs600_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	u8 buf[I2C_SMBUS_BLOCK_MAX + 1];
+	int ret;
+	const struct i2c_device_id *mid;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_READ_BYTE_DATA
+				     | I2C_FUNC_SMBUS_READ_WORD_DATA
+				     | I2C_FUNC_SMBUS_READ_BLOCK_DATA))
+		return -ENODEV;
+
+	ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, buf);
+	if (ret < 0) {
+		dev_err(dev, "Failed to read Manufacturer Model\n");
+		return ret;
+	}
+
+	for (mid = bpa_rs600_id; mid->name[0]; mid++) {
+		if (!strncasecmp(buf, mid->name, strlen(mid->name)))
+			break;
+	}
+	if (!mid->name[0]) {
+		buf[ret] = '\0';
+		dev_err(dev, "Unsupported Manufacturer Model '%s'\n", buf);
+		return -ENODEV;
+	}
+
+	return pmbus_do_probe(client, &bpa_rs600_info);
+}
+
+static const struct of_device_id __maybe_unused bpa_rs600_of_match[] = {
+	{ .compatible = "blutek,bpa-rs600" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, bpa_rs600_of_match);
+
+static struct i2c_driver bpa_rs600_driver = {
+	.driver = {
+		.name = "bpa-rs600",
+		.of_match_table = of_match_ptr(bpa_rs600_of_match),
+	},
+	.probe_new = bpa_rs600_probe,
+	.id_table = bpa_rs600_id,
+};
+
+module_i2c_driver(bpa_rs600_driver);
+
+MODULE_AUTHOR("Chris Packham");
+MODULE_DESCRIPTION("PMBus driver for BluTek BPA-RS600");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/delta-ahe50dc-fan.c b/drivers/hwmon/pmbus/delta-ahe50dc-fan.c
new file mode 100644
index 000000000..f546f0c12
--- /dev/null
+++ b/drivers/hwmon/pmbus/delta-ahe50dc-fan.c
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Delta AHE-50DC power shelf fan control module driver
+ *
+ * Copyright 2021 Zev Weiss <zev@bewilderbeest.net>
+ */
+
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pmbus.h>
+
+#include "pmbus.h"
+
+#define AHE50DC_PMBUS_READ_TEMP4 0xd0
+
+static int ahe50dc_fan_write_byte(struct i2c_client *client, int page, u8 value)
+{
+	/*
+	 * The CLEAR_FAULTS operation seems to sometimes (unpredictably, perhaps
+	 * 5% of the time or so) trigger a problematic phenomenon in which the
+	 * fan speeds surge momentarily and at least some (perhaps all?) of the
+	 * system's power outputs experience a glitch.
+	 *
+	 * However, according to Delta it should be OK to simply not send any
+	 * CLEAR_FAULTS commands (the device doesn't seem to be capable of
+	 * reporting any faults anyway), so just blackhole them unconditionally.
+	 */
+	return value == PMBUS_CLEAR_FAULTS ? -EOPNOTSUPP : -ENODATA;
+}
+
+static int ahe50dc_fan_read_word_data(struct i2c_client *client, int page, int phase, int reg)
+{
+	/* temp1 in (virtual) page 1 is remapped to mfr-specific temp4 */
+	if (page == 1) {
+		if (reg == PMBUS_READ_TEMPERATURE_1)
+			return i2c_smbus_read_word_data(client, AHE50DC_PMBUS_READ_TEMP4);
+		return -EOPNOTSUPP;
+	}
+
+	/*
+	 * There's a fairly limited set of commands this device actually
+	 * supports, so here we block attempts to read anything else (which
+	 * return 0xffff and would cause confusion elsewhere).
+	 */
+	switch (reg) {
+	case PMBUS_STATUS_WORD:
+	case PMBUS_FAN_COMMAND_1:
+	case PMBUS_FAN_COMMAND_2:
+	case PMBUS_FAN_COMMAND_3:
+	case PMBUS_FAN_COMMAND_4:
+	case PMBUS_STATUS_FAN_12:
+	case PMBUS_STATUS_FAN_34:
+	case PMBUS_READ_VIN:
+	case PMBUS_READ_TEMPERATURE_1:
+	case PMBUS_READ_TEMPERATURE_2:
+	case PMBUS_READ_TEMPERATURE_3:
+	case PMBUS_READ_FAN_SPEED_1:
+	case PMBUS_READ_FAN_SPEED_2:
+	case PMBUS_READ_FAN_SPEED_3:
+	case PMBUS_READ_FAN_SPEED_4:
+		return -ENODATA;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static struct pmbus_driver_info ahe50dc_fan_info = {
+	.pages = 2,
+	.format[PSC_FAN] = direct,
+	.format[PSC_TEMPERATURE] = direct,
+	.format[PSC_VOLTAGE_IN] = direct,
+	.m[PSC_FAN] = 1,
+	.b[PSC_FAN] = 0,
+	.R[PSC_FAN] = 0,
+	.m[PSC_TEMPERATURE] = 1,
+	.b[PSC_TEMPERATURE] = 0,
+	.R[PSC_TEMPERATURE] = 1,
+	.m[PSC_VOLTAGE_IN] = 1,
+	.b[PSC_VOLTAGE_IN] = 0,
+	.R[PSC_VOLTAGE_IN] = 3,
+	.func[0] = PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_TEMP3 |
+		PMBUS_HAVE_VIN | PMBUS_HAVE_FAN12 | PMBUS_HAVE_FAN34 |
+		PMBUS_HAVE_STATUS_FAN12 | PMBUS_HAVE_STATUS_FAN34 | PMBUS_PAGE_VIRTUAL,
+	.func[1] = PMBUS_HAVE_TEMP | PMBUS_PAGE_VIRTUAL,
+	.write_byte = ahe50dc_fan_write_byte,
+	.read_word_data = ahe50dc_fan_read_word_data,
+};
+
+/*
+ * CAPABILITY returns 0xff, which appears to be this device's way indicating
+ * it doesn't support something (and if we enable I2C_CLIENT_PEC on seeing bit
+ * 7 being set it generates bad PECs, so let's not go there).
+ */
+static struct pmbus_platform_data ahe50dc_fan_data = {
+	.flags = PMBUS_NO_CAPABILITY,
+};
+
+static int ahe50dc_fan_probe(struct i2c_client *client)
+{
+	client->dev.platform_data = &ahe50dc_fan_data;
+	return pmbus_do_probe(client, &ahe50dc_fan_info);
+}
+
+static const struct i2c_device_id ahe50dc_fan_id[] = {
+	{ "ahe50dc_fan" },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ahe50dc_fan_id);
+
+static const struct of_device_id __maybe_unused ahe50dc_fan_of_match[] = {
+	{ .compatible = "delta,ahe50dc-fan" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ahe50dc_fan_of_match);
+
+static struct i2c_driver ahe50dc_fan_driver = {
+	.driver = {
+		   .name = "ahe50dc_fan",
+		   .of_match_table = of_match_ptr(ahe50dc_fan_of_match),
+	},
+	.probe_new = ahe50dc_fan_probe,
+	.id_table = ahe50dc_fan_id,
+};
+module_i2c_driver(ahe50dc_fan_driver);
+
+MODULE_AUTHOR("Zev Weiss <zev@bewilderbeest.net>");
+MODULE_DESCRIPTION("Driver for Delta AHE-50DC power shelf fan control module");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/dps920ab.c b/drivers/hwmon/pmbus/dps920ab.c
new file mode 100644
index 000000000..d3941f6eb
--- /dev/null
+++ b/drivers/hwmon/pmbus/dps920ab.c
@@ -0,0 +1,206 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Driver for Delta DPS920AB PSU
+ *
+ * Copyright (C) 2021 Delta Networks, Inc.
+ * Copyright (C) 2021 Sartura Ltd.
+ */
+
+#include <linux/debugfs.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include "pmbus.h"
+
+struct dps920ab_data {
+	char *mfr_model;
+	char *mfr_id;
+};
+
+static int dps920ab_read_word_data(struct i2c_client *client, int page, int phase, int reg)
+{
+	/*
+	 * This masks commands which are not supported.
+	 * PSU advertises that all features are supported,
+	 * in reality that unfortunately is not true.
+	 * So enable only those that the datasheet confirms.
+	 */
+	switch (reg) {
+	case PMBUS_FAN_COMMAND_1:
+	case PMBUS_IOUT_OC_WARN_LIMIT:
+	case PMBUS_STATUS_WORD:
+	case PMBUS_READ_VIN:
+	case PMBUS_READ_IIN:
+	case PMBUS_READ_VOUT:
+	case PMBUS_READ_IOUT:
+	case PMBUS_READ_TEMPERATURE_1:
+	case PMBUS_READ_TEMPERATURE_2:
+	case PMBUS_READ_TEMPERATURE_3:
+	case PMBUS_READ_FAN_SPEED_1:
+	case PMBUS_READ_POUT:
+	case PMBUS_READ_PIN:
+	case PMBUS_MFR_VOUT_MIN:
+	case PMBUS_MFR_VOUT_MAX:
+	case PMBUS_MFR_IOUT_MAX:
+	case PMBUS_MFR_POUT_MAX:
+		return pmbus_read_word_data(client, page, phase, reg);
+	default:
+		return -ENXIO;
+	}
+}
+
+static int dps920ab_write_word_data(struct i2c_client *client, int page, int reg,
+				    u16 word)
+{
+	/*
+	 * This masks commands which are not supported.
+	 * PSU only has one R/W register and that is
+	 * for the fan.
+	 */
+	switch (reg) {
+	case PMBUS_FAN_COMMAND_1:
+		return pmbus_write_word_data(client, page, reg, word);
+	default:
+		return -EACCES;
+	}
+}
+
+static struct pmbus_driver_info dps920ab_info = {
+	.pages = 1,
+
+	.format[PSC_VOLTAGE_IN] = linear,
+	.format[PSC_VOLTAGE_OUT] = linear,
+	.format[PSC_CURRENT_IN] = linear,
+	.format[PSC_CURRENT_OUT] = linear,
+	.format[PSC_POWER] = linear,
+	.format[PSC_FAN] = linear,
+	.format[PSC_TEMPERATURE] = linear,
+
+	.func[0] =
+		PMBUS_HAVE_VIN | PMBUS_HAVE_IIN | PMBUS_HAVE_PIN |
+		PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT | PMBUS_HAVE_POUT |
+		PMBUS_HAVE_TEMP  | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_TEMP3 |
+		PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12 |
+		PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT |
+		PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP,
+	.read_word_data = dps920ab_read_word_data,
+	.write_word_data = dps920ab_write_word_data,
+};
+
+static int dps920ab_mfr_id_show(struct seq_file *s, void *data)
+{
+	struct dps920ab_data *priv = s->private;
+
+	seq_printf(s, "%s\n", priv->mfr_id);
+
+	return 0;
+}
+
+DEFINE_SHOW_ATTRIBUTE(dps920ab_mfr_id);
+
+static int dps920ab_mfr_model_show(struct seq_file *s, void *data)
+{
+	struct dps920ab_data *priv = s->private;
+
+	seq_printf(s, "%s\n", priv->mfr_model);
+
+	return 0;
+}
+
+DEFINE_SHOW_ATTRIBUTE(dps920ab_mfr_model);
+
+static void dps920ab_init_debugfs(struct dps920ab_data *data, struct i2c_client *client)
+{
+	struct dentry *debugfs_dir;
+	struct dentry *root;
+
+	root = pmbus_get_debugfs_dir(client);
+	if (!root)
+		return;
+
+	debugfs_dir = debugfs_create_dir(client->name, root);
+
+	debugfs_create_file("mfr_id",
+			    0400,
+			    debugfs_dir,
+			    data,
+			    &dps920ab_mfr_id_fops);
+
+	debugfs_create_file("mfr_model",
+			    0400,
+			    debugfs_dir,
+			    data,
+			    &dps920ab_mfr_model_fops);
+}
+
+static int dps920ab_probe(struct i2c_client *client)
+{
+	u8 buf[I2C_SMBUS_BLOCK_MAX + 1];
+	struct dps920ab_data *data;
+	int ret;
+
+	data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, buf);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to read Manufacturer ID\n");
+		return ret;
+	}
+
+	buf[ret] = '\0';
+	if (ret != 5 || strncmp(buf, "DELTA", 5)) {
+		buf[ret] = '\0';
+		dev_err(&client->dev, "Unsupported Manufacturer ID '%s'\n", buf);
+		return -ENODEV;
+	}
+	data->mfr_id = devm_kstrdup(&client->dev, buf, GFP_KERNEL);
+	if (!data->mfr_id)
+		return -ENOMEM;
+
+	ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, buf);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to read Manufacturer Model\n");
+		return ret;
+	}
+
+	buf[ret] = '\0';
+	if (ret != 11 || strncmp(buf, "DPS-920AB", 9)) {
+		dev_err(&client->dev, "Unsupported Manufacturer Model '%s'\n", buf);
+		return -ENODEV;
+	}
+	data->mfr_model = devm_kstrdup(&client->dev, buf, GFP_KERNEL);
+	if (!data->mfr_model)
+		return -ENOMEM;
+
+	ret = pmbus_do_probe(client, &dps920ab_info);
+	if (ret)
+		return ret;
+
+	dps920ab_init_debugfs(data, client);
+
+	return 0;
+}
+
+static const struct of_device_id __maybe_unused dps920ab_of_match[] = {
+	{ .compatible = "delta,dps920ab", },
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, dps920ab_of_match);
+
+static struct i2c_driver dps920ab_driver = {
+	.driver = {
+		   .name = "dps920ab",
+		   .of_match_table = of_match_ptr(dps920ab_of_match),
+	},
+	.probe_new = dps920ab_probe,
+};
+
+module_i2c_driver(dps920ab_driver);
+
+MODULE_AUTHOR("Robert Marko <robert.marko@sartura.hr>");
+MODULE_DESCRIPTION("PMBus driver for Delta DPS920AB PSU");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/fsp-3y.c b/drivers/hwmon/pmbus/fsp-3y.c
new file mode 100644
index 000000000..c7469d2cd
--- /dev/null
+++ b/drivers/hwmon/pmbus/fsp-3y.c
@@ -0,0 +1,294 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Hardware monitoring driver for FSP 3Y-Power PSUs
+ *
+ * Copyright (c) 2021 Václav Kubernát, CESNET
+ *
+ * This driver is mostly reverse engineered with the help of a tool called pmbus_peek written by
+ * David Brownell (and later adopted by Jan Kundrát). The device has some sort of a timing issue
+ * when switching pages, details are explained in the code. The driver support is limited. It
+ * exposes only the values, that have been tested to work correctly. Unsupported values either
+ * aren't supported by the devices or their encondings are unknown.
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include "pmbus.h"
+
+#define YM2151_PAGE_12V_LOG	0x00
+#define YM2151_PAGE_12V_REAL	0x00
+#define YM2151_PAGE_5VSB_LOG	0x01
+#define YM2151_PAGE_5VSB_REAL	0x20
+#define YH5151E_PAGE_12V_LOG	0x00
+#define YH5151E_PAGE_12V_REAL	0x00
+#define YH5151E_PAGE_5V_LOG	0x01
+#define YH5151E_PAGE_5V_REAL	0x10
+#define YH5151E_PAGE_3V3_LOG	0x02
+#define YH5151E_PAGE_3V3_REAL	0x11
+
+enum chips {
+	ym2151e,
+	yh5151e
+};
+
+struct fsp3y_data {
+	struct pmbus_driver_info info;
+	int chip;
+	int page;
+
+	bool vout_linear_11;
+};
+
+#define to_fsp3y_data(x) container_of(x, struct fsp3y_data, info)
+
+static int page_log_to_page_real(int page_log, enum chips chip)
+{
+	switch (chip) {
+	case ym2151e:
+		switch (page_log) {
+		case YM2151_PAGE_12V_LOG:
+			return YM2151_PAGE_12V_REAL;
+		case YM2151_PAGE_5VSB_LOG:
+			return YM2151_PAGE_5VSB_REAL;
+		}
+		return -EINVAL;
+	case yh5151e:
+		switch (page_log) {
+		case YH5151E_PAGE_12V_LOG:
+			return YH5151E_PAGE_12V_REAL;
+		case YH5151E_PAGE_5V_LOG:
+			return YH5151E_PAGE_5V_REAL;
+		case YH5151E_PAGE_3V3_LOG:
+			return YH5151E_PAGE_3V3_REAL;
+		}
+		return -EINVAL;
+	}
+
+	return -EINVAL;
+}
+
+static int set_page(struct i2c_client *client, int page_log)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	struct fsp3y_data *data = to_fsp3y_data(info);
+	int rv;
+	int page_real;
+
+	if (page_log < 0)
+		return 0;
+
+	page_real = page_log_to_page_real(page_log, data->chip);
+	if (page_real < 0)
+		return page_real;
+
+	if (data->page != page_real) {
+		rv = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page_real);
+		if (rv < 0)
+			return rv;
+
+		data->page = page_real;
+
+		/*
+		 * Testing showed that the device has a timing issue. After
+		 * setting a page, it takes a while, before the device actually
+		 * gives the correct values from the correct page. 20 ms was
+		 * tested to be enough to not give wrong values (15 ms wasn't
+		 * enough).
+		 */
+		usleep_range(20000, 30000);
+	}
+
+	return 0;
+}
+
+static int fsp3y_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	struct fsp3y_data *data = to_fsp3y_data(info);
+	int rv;
+
+	/*
+	 * Inject an exponent for non-compliant YH5151-E.
+	 */
+	if (data->vout_linear_11 && reg == PMBUS_VOUT_MODE)
+		return 0x1A;
+
+	rv = set_page(client, page);
+	if (rv < 0)
+		return rv;
+
+	return i2c_smbus_read_byte_data(client, reg);
+}
+
+static int fsp3y_read_word_data(struct i2c_client *client, int page, int phase, int reg)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	struct fsp3y_data *data = to_fsp3y_data(info);
+	int rv;
+
+	/*
+	 * This masks commands which weren't tested to work correctly. Some of
+	 * the masked commands return 0xFFFF. These would probably get tagged as
+	 * invalid by pmbus_core. Other ones do return values which might be
+	 * useful (that is, they are not 0xFFFF), but their encoding is unknown,
+	 * and so they are unsupported.
+	 */
+	switch (reg) {
+	case PMBUS_READ_FAN_SPEED_1:
+	case PMBUS_READ_IIN:
+	case PMBUS_READ_IOUT:
+	case PMBUS_READ_PIN:
+	case PMBUS_READ_POUT:
+	case PMBUS_READ_TEMPERATURE_1:
+	case PMBUS_READ_TEMPERATURE_2:
+	case PMBUS_READ_TEMPERATURE_3:
+	case PMBUS_READ_VIN:
+	case PMBUS_READ_VOUT:
+	case PMBUS_STATUS_WORD:
+		break;
+	default:
+		return -ENXIO;
+	}
+
+	rv = set_page(client, page);
+	if (rv < 0)
+		return rv;
+
+	rv = i2c_smbus_read_word_data(client, reg);
+	if (rv < 0)
+		return rv;
+
+	/*
+	 * Handle YH-5151E non-compliant linear11 vout voltage.
+	 */
+	if (data->vout_linear_11 && reg == PMBUS_READ_VOUT)
+		rv = sign_extend32(rv, 10) & 0xffff;
+
+	return rv;
+}
+
+static struct pmbus_driver_info fsp3y_info[] = {
+	[ym2151e] = {
+		.pages = 2,
+		.func[YM2151_PAGE_12V_LOG] =
+			PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT |
+			PMBUS_HAVE_PIN | PMBUS_HAVE_POUT  |
+			PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 |
+			PMBUS_HAVE_VIN | PMBUS_HAVE_IIN |
+			PMBUS_HAVE_FAN12,
+		.func[YM2151_PAGE_5VSB_LOG] =
+			PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT,
+		.read_word_data = fsp3y_read_word_data,
+		.read_byte_data = fsp3y_read_byte_data,
+	},
+	[yh5151e] = {
+		.pages = 3,
+		.func[YH5151E_PAGE_12V_LOG] =
+			PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT |
+			PMBUS_HAVE_POUT  |
+			PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_TEMP3,
+		.func[YH5151E_PAGE_5V_LOG] =
+			PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT |
+			PMBUS_HAVE_POUT,
+		.func[YH5151E_PAGE_3V3_LOG] =
+			PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT |
+			PMBUS_HAVE_POUT,
+		.read_word_data = fsp3y_read_word_data,
+		.read_byte_data = fsp3y_read_byte_data,
+	}
+};
+
+static int fsp3y_detect(struct i2c_client *client)
+{
+	int rv;
+	u8 buf[I2C_SMBUS_BLOCK_MAX + 1];
+
+	rv = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, buf);
+	if (rv < 0)
+		return rv;
+
+	buf[rv] = '\0';
+
+	if (rv == 8) {
+		if (!strcmp(buf, "YM-2151E"))
+			return ym2151e;
+		else if (!strcmp(buf, "YH-5151E"))
+			return yh5151e;
+	}
+
+	dev_err(&client->dev, "Unsupported model %.*s\n", rv, buf);
+	return -ENODEV;
+}
+
+static const struct i2c_device_id fsp3y_id[] = {
+	{"ym2151e", ym2151e},
+	{"yh5151e", yh5151e},
+	{ }
+};
+
+static int fsp3y_probe(struct i2c_client *client)
+{
+	struct fsp3y_data *data;
+	const struct i2c_device_id *id;
+	int rv;
+
+	data = devm_kzalloc(&client->dev, sizeof(struct fsp3y_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->chip = fsp3y_detect(client);
+	if (data->chip < 0)
+		return data->chip;
+
+	id = i2c_match_id(fsp3y_id, client);
+	if (data->chip != id->driver_data)
+		dev_warn(&client->dev, "Device mismatch: Configured %s (%d), detected %d\n",
+			 id->name, (int)id->driver_data, data->chip);
+
+	rv = i2c_smbus_read_byte_data(client, PMBUS_PAGE);
+	if (rv < 0)
+		return rv;
+	data->page = rv;
+
+	data->info = fsp3y_info[data->chip];
+
+	/*
+	 * YH-5151E sometimes reports vout in linear11 and sometimes in
+	 * linear16. This depends on the exact individual piece of hardware. One
+	 * YH-5151E can use linear16 and another might use linear11 instead.
+	 *
+	 * The format can be recognized by reading VOUT_MODE - if it doesn't
+	 * report a valid exponent, then vout uses linear11. Otherwise, the
+	 * device is compliant and uses linear16.
+	 */
+	data->vout_linear_11 = false;
+	if (data->chip == yh5151e) {
+		rv = i2c_smbus_read_byte_data(client, PMBUS_VOUT_MODE);
+		if (rv < 0)
+			return rv;
+
+		if (rv == 0xFF)
+			data->vout_linear_11 = true;
+	}
+
+	return pmbus_do_probe(client, &data->info);
+}
+
+MODULE_DEVICE_TABLE(i2c, fsp3y_id);
+
+static struct i2c_driver fsp3y_driver = {
+	.driver = {
+		   .name = "fsp3y",
+		   },
+	.probe_new = fsp3y_probe,
+	.id_table = fsp3y_id
+};
+
+module_i2c_driver(fsp3y_driver);
+
+MODULE_AUTHOR("Václav Kubernát");
+MODULE_DESCRIPTION("PMBus driver for FSP/3Y-Power power supplies");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/ibm-cffps.c b/drivers/hwmon/pmbus/ibm-cffps.c
new file mode 100644
index 000000000..e3294a1a5
--- /dev/null
+++ b/drivers/hwmon/pmbus/ibm-cffps.c
@@ -0,0 +1,653 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2017 IBM Corp.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/i2c.h>
+#include <linux/jiffies.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_device.h>
+#include <linux/pmbus.h>
+
+#include "pmbus.h"
+
+#define CFFPS_MFG_ID_CMD                        0x99
+#define CFFPS_FRU_CMD				0x9A
+#define CFFPS_PN_CMD				0x9B
+#define CFFPS_HEADER_CMD			0x9C
+#define CFFPS_SN_CMD				0x9E
+#define CFFPS_MAX_POWER_OUT_CMD			0xA7
+#define CFFPS_CCIN_CMD				0xBD
+#define CFFPS_FW_CMD				0xFA
+#define CFFPS1_FW_NUM_BYTES			4
+#define CFFPS2_FW_NUM_WORDS			3
+#define CFFPS_SYS_CONFIG_CMD			0xDA
+#define CFFPS_12VCS_VOUT_CMD			0xDE
+
+#define CFFPS_INPUT_HISTORY_CMD			0xD6
+#define CFFPS_INPUT_HISTORY_SIZE		100
+
+#define CFFPS_CCIN_REVISION			GENMASK(7, 0)
+#define CFFPS_CCIN_REVISION_LEGACY		 0xde
+#define CFFPS_CCIN_VERSION			GENMASK(15, 8)
+#define CFFPS_CCIN_VERSION_1			 0x2b
+#define CFFPS_CCIN_VERSION_2			 0x2e
+#define CFFPS_CCIN_VERSION_3			 0x51
+
+/* STATUS_MFR_SPECIFIC bits */
+#define CFFPS_MFR_FAN_FAULT			BIT(0)
+#define CFFPS_MFR_THERMAL_FAULT			BIT(1)
+#define CFFPS_MFR_OV_FAULT			BIT(2)
+#define CFFPS_MFR_UV_FAULT			BIT(3)
+#define CFFPS_MFR_PS_KILL			BIT(4)
+#define CFFPS_MFR_OC_FAULT			BIT(5)
+#define CFFPS_MFR_VAUX_FAULT			BIT(6)
+#define CFFPS_MFR_CURRENT_SHARE_WARNING		BIT(7)
+
+#define CFFPS_LED_BLINK				(BIT(0) | BIT(6))
+#define CFFPS_LED_ON				(BIT(1) | BIT(6))
+#define CFFPS_LED_OFF				(BIT(2) | BIT(6))
+#define CFFPS_BLINK_RATE_MS			250
+
+enum {
+	CFFPS_DEBUGFS_INPUT_HISTORY = 0,
+	CFFPS_DEBUGFS_MFG_ID,
+	CFFPS_DEBUGFS_FRU,
+	CFFPS_DEBUGFS_PN,
+	CFFPS_DEBUGFS_HEADER,
+	CFFPS_DEBUGFS_SN,
+	CFFPS_DEBUGFS_MAX_POWER_OUT,
+	CFFPS_DEBUGFS_CCIN,
+	CFFPS_DEBUGFS_FW,
+	CFFPS_DEBUGFS_ON_OFF_CONFIG,
+	CFFPS_DEBUGFS_NUM_ENTRIES
+};
+
+enum versions { cffps1, cffps2, cffps_unknown };
+
+struct ibm_cffps_input_history {
+	struct mutex update_lock;
+	unsigned long last_update;
+
+	u8 byte_count;
+	u8 data[CFFPS_INPUT_HISTORY_SIZE];
+};
+
+struct ibm_cffps {
+	enum versions version;
+	struct i2c_client *client;
+
+	struct ibm_cffps_input_history input_history;
+
+	int debugfs_entries[CFFPS_DEBUGFS_NUM_ENTRIES];
+
+	char led_name[32];
+	u8 led_state;
+	struct led_classdev led;
+};
+
+static const struct i2c_device_id ibm_cffps_id[];
+
+#define to_psu(x, y) container_of((x), struct ibm_cffps, debugfs_entries[(y)])
+
+static ssize_t ibm_cffps_read_input_history(struct ibm_cffps *psu,
+					    char __user *buf, size_t count,
+					    loff_t *ppos)
+{
+	int rc;
+	u8 msgbuf0[1] = { CFFPS_INPUT_HISTORY_CMD };
+	u8 msgbuf1[CFFPS_INPUT_HISTORY_SIZE + 1] = { 0 };
+	struct i2c_msg msg[2] = {
+		{
+			.addr = psu->client->addr,
+			.flags = psu->client->flags,
+			.len = 1,
+			.buf = msgbuf0,
+		}, {
+			.addr = psu->client->addr,
+			.flags = psu->client->flags | I2C_M_RD,
+			.len = CFFPS_INPUT_HISTORY_SIZE + 1,
+			.buf = msgbuf1,
+		},
+	};
+
+	if (!*ppos) {
+		mutex_lock(&psu->input_history.update_lock);
+		if (time_after(jiffies, psu->input_history.last_update + HZ)) {
+			/*
+			 * Use a raw i2c transfer, since we need more bytes
+			 * than Linux I2C supports through smbus xfr (only 32).
+			 */
+			rc = i2c_transfer(psu->client->adapter, msg, 2);
+			if (rc < 0) {
+				mutex_unlock(&psu->input_history.update_lock);
+				return rc;
+			}
+
+			psu->input_history.byte_count = msgbuf1[0];
+			memcpy(psu->input_history.data, &msgbuf1[1],
+			       CFFPS_INPUT_HISTORY_SIZE);
+			psu->input_history.last_update = jiffies;
+		}
+
+		mutex_unlock(&psu->input_history.update_lock);
+	}
+
+	return simple_read_from_buffer(buf, count, ppos,
+				       psu->input_history.data,
+				       psu->input_history.byte_count);
+}
+
+static ssize_t ibm_cffps_debugfs_read(struct file *file, char __user *buf,
+				      size_t count, loff_t *ppos)
+{
+	u8 cmd;
+	int i, rc;
+	int *idxp = file->private_data;
+	int idx = *idxp;
+	struct ibm_cffps *psu = to_psu(idxp, idx);
+	char data[I2C_SMBUS_BLOCK_MAX + 2] = { 0 };
+
+	pmbus_set_page(psu->client, 0, 0xff);
+
+	switch (idx) {
+	case CFFPS_DEBUGFS_INPUT_HISTORY:
+		return ibm_cffps_read_input_history(psu, buf, count, ppos);
+	case CFFPS_DEBUGFS_MFG_ID:
+		cmd = CFFPS_MFG_ID_CMD;
+		break;
+	case CFFPS_DEBUGFS_FRU:
+		cmd = CFFPS_FRU_CMD;
+		break;
+	case CFFPS_DEBUGFS_PN:
+		cmd = CFFPS_PN_CMD;
+		break;
+	case CFFPS_DEBUGFS_HEADER:
+		cmd = CFFPS_HEADER_CMD;
+		break;
+	case CFFPS_DEBUGFS_SN:
+		cmd = CFFPS_SN_CMD;
+		break;
+	case CFFPS_DEBUGFS_MAX_POWER_OUT:
+		if (psu->version == cffps1) {
+			rc = i2c_smbus_read_word_swapped(psu->client,
+					CFFPS_MAX_POWER_OUT_CMD);
+		} else {
+			rc = i2c_smbus_read_word_data(psu->client,
+					CFFPS_MAX_POWER_OUT_CMD);
+		}
+
+		if (rc < 0)
+			return rc;
+
+		rc = snprintf(data, I2C_SMBUS_BLOCK_MAX, "%d", rc);
+		goto done;
+	case CFFPS_DEBUGFS_CCIN:
+		rc = i2c_smbus_read_word_swapped(psu->client, CFFPS_CCIN_CMD);
+		if (rc < 0)
+			return rc;
+
+		rc = snprintf(data, 5, "%04X", rc);
+		goto done;
+	case CFFPS_DEBUGFS_FW:
+		switch (psu->version) {
+		case cffps1:
+			for (i = 0; i < CFFPS1_FW_NUM_BYTES; ++i) {
+				rc = i2c_smbus_read_byte_data(psu->client,
+							      CFFPS_FW_CMD +
+								i);
+				if (rc < 0)
+					return rc;
+
+				snprintf(&data[i * 2], 3, "%02X", rc);
+			}
+
+			rc = i * 2;
+			break;
+		case cffps2:
+			for (i = 0; i < CFFPS2_FW_NUM_WORDS; ++i) {
+				rc = i2c_smbus_read_word_data(psu->client,
+							      CFFPS_FW_CMD +
+								i);
+				if (rc < 0)
+					return rc;
+
+				snprintf(&data[i * 4], 5, "%04X", rc);
+			}
+
+			rc = i * 4;
+			break;
+		default:
+			return -EOPNOTSUPP;
+		}
+		goto done;
+	case CFFPS_DEBUGFS_ON_OFF_CONFIG:
+		rc = i2c_smbus_read_byte_data(psu->client,
+					      PMBUS_ON_OFF_CONFIG);
+		if (rc < 0)
+			return rc;
+
+		rc = snprintf(data, 3, "%02x", rc);
+		goto done;
+	default:
+		return -EINVAL;
+	}
+
+	rc = i2c_smbus_read_block_data(psu->client, cmd, data);
+	if (rc < 0)
+		return rc;
+
+done:
+	data[rc] = '\n';
+	rc += 2;
+
+	return simple_read_from_buffer(buf, count, ppos, data, rc);
+}
+
+static ssize_t ibm_cffps_debugfs_write(struct file *file,
+				       const char __user *buf, size_t count,
+				       loff_t *ppos)
+{
+	u8 data;
+	ssize_t rc;
+	int *idxp = file->private_data;
+	int idx = *idxp;
+	struct ibm_cffps *psu = to_psu(idxp, idx);
+
+	switch (idx) {
+	case CFFPS_DEBUGFS_ON_OFF_CONFIG:
+		pmbus_set_page(psu->client, 0, 0xff);
+
+		rc = simple_write_to_buffer(&data, 1, ppos, buf, count);
+		if (rc <= 0)
+			return rc;
+
+		rc = i2c_smbus_write_byte_data(psu->client,
+					       PMBUS_ON_OFF_CONFIG, data);
+		if (rc)
+			return rc;
+
+		rc = 1;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return rc;
+}
+
+static const struct file_operations ibm_cffps_fops = {
+	.llseek = noop_llseek,
+	.read = ibm_cffps_debugfs_read,
+	.write = ibm_cffps_debugfs_write,
+	.open = simple_open,
+};
+
+static int ibm_cffps_read_byte_data(struct i2c_client *client, int page,
+				    int reg)
+{
+	int rc, mfr;
+
+	switch (reg) {
+	case PMBUS_STATUS_VOUT:
+	case PMBUS_STATUS_IOUT:
+	case PMBUS_STATUS_TEMPERATURE:
+	case PMBUS_STATUS_FAN_12:
+		rc = pmbus_read_byte_data(client, page, reg);
+		if (rc < 0)
+			return rc;
+
+		mfr = pmbus_read_byte_data(client, page,
+					   PMBUS_STATUS_MFR_SPECIFIC);
+		if (mfr < 0)
+			/*
+			 * Return the status register instead of an error,
+			 * since we successfully read status.
+			 */
+			return rc;
+
+		/* Add MFR_SPECIFIC bits to the standard pmbus status regs. */
+		if (reg == PMBUS_STATUS_FAN_12) {
+			if (mfr & CFFPS_MFR_FAN_FAULT)
+				rc |= PB_FAN_FAN1_FAULT;
+		} else if (reg == PMBUS_STATUS_TEMPERATURE) {
+			if (mfr & CFFPS_MFR_THERMAL_FAULT)
+				rc |= PB_TEMP_OT_FAULT;
+		} else if (reg == PMBUS_STATUS_VOUT) {
+			if (mfr & (CFFPS_MFR_OV_FAULT | CFFPS_MFR_VAUX_FAULT))
+				rc |= PB_VOLTAGE_OV_FAULT;
+			if (mfr & CFFPS_MFR_UV_FAULT)
+				rc |= PB_VOLTAGE_UV_FAULT;
+		} else if (reg == PMBUS_STATUS_IOUT) {
+			if (mfr & CFFPS_MFR_OC_FAULT)
+				rc |= PB_IOUT_OC_FAULT;
+			if (mfr & CFFPS_MFR_CURRENT_SHARE_WARNING)
+				rc |= PB_CURRENT_SHARE_FAULT;
+		}
+		break;
+	default:
+		rc = -ENODATA;
+		break;
+	}
+
+	return rc;
+}
+
+static int ibm_cffps_read_word_data(struct i2c_client *client, int page,
+				    int phase, int reg)
+{
+	int rc, mfr;
+
+	switch (reg) {
+	case PMBUS_STATUS_WORD:
+		rc = pmbus_read_word_data(client, page, phase, reg);
+		if (rc < 0)
+			return rc;
+
+		mfr = pmbus_read_byte_data(client, page,
+					   PMBUS_STATUS_MFR_SPECIFIC);
+		if (mfr < 0)
+			/*
+			 * Return the status register instead of an error,
+			 * since we successfully read status.
+			 */
+			return rc;
+
+		if (mfr & CFFPS_MFR_PS_KILL)
+			rc |= PB_STATUS_OFF;
+		break;
+	case PMBUS_VIRT_READ_VMON:
+		rc = pmbus_read_word_data(client, page, phase,
+					  CFFPS_12VCS_VOUT_CMD);
+		break;
+	default:
+		rc = -ENODATA;
+		break;
+	}
+
+	return rc;
+}
+
+static int ibm_cffps_led_brightness_set(struct led_classdev *led_cdev,
+					enum led_brightness brightness)
+{
+	int rc;
+	u8 next_led_state;
+	struct ibm_cffps *psu = container_of(led_cdev, struct ibm_cffps, led);
+
+	if (brightness == LED_OFF) {
+		next_led_state = CFFPS_LED_OFF;
+	} else {
+		brightness = LED_FULL;
+
+		if (psu->led_state != CFFPS_LED_BLINK)
+			next_led_state = CFFPS_LED_ON;
+		else
+			next_led_state = CFFPS_LED_BLINK;
+	}
+
+	dev_dbg(&psu->client->dev, "LED brightness set: %d. Command: %d.\n",
+		brightness, next_led_state);
+
+	pmbus_set_page(psu->client, 0, 0xff);
+
+	rc = i2c_smbus_write_byte_data(psu->client, CFFPS_SYS_CONFIG_CMD,
+				       next_led_state);
+	if (rc < 0)
+		return rc;
+
+	psu->led_state = next_led_state;
+	led_cdev->brightness = brightness;
+
+	return 0;
+}
+
+static int ibm_cffps_led_blink_set(struct led_classdev *led_cdev,
+				   unsigned long *delay_on,
+				   unsigned long *delay_off)
+{
+	int rc;
+	struct ibm_cffps *psu = container_of(led_cdev, struct ibm_cffps, led);
+
+	dev_dbg(&psu->client->dev, "LED blink set.\n");
+
+	pmbus_set_page(psu->client, 0, 0xff);
+
+	rc = i2c_smbus_write_byte_data(psu->client, CFFPS_SYS_CONFIG_CMD,
+				       CFFPS_LED_BLINK);
+	if (rc < 0)
+		return rc;
+
+	psu->led_state = CFFPS_LED_BLINK;
+	led_cdev->brightness = LED_FULL;
+	*delay_on = CFFPS_BLINK_RATE_MS;
+	*delay_off = CFFPS_BLINK_RATE_MS;
+
+	return 0;
+}
+
+static void ibm_cffps_create_led_class(struct ibm_cffps *psu)
+{
+	int rc;
+	struct i2c_client *client = psu->client;
+	struct device *dev = &client->dev;
+
+	snprintf(psu->led_name, sizeof(psu->led_name), "%s-%02x", client->name,
+		 client->addr);
+	psu->led.name = psu->led_name;
+	psu->led.max_brightness = LED_FULL;
+	psu->led.brightness_set_blocking = ibm_cffps_led_brightness_set;
+	psu->led.blink_set = ibm_cffps_led_blink_set;
+
+	rc = devm_led_classdev_register(dev, &psu->led);
+	if (rc)
+		dev_warn(dev, "failed to register led class: %d\n", rc);
+	else
+		i2c_smbus_write_byte_data(client, CFFPS_SYS_CONFIG_CMD,
+					  CFFPS_LED_OFF);
+}
+
+static struct pmbus_driver_info ibm_cffps_info[] = {
+	[cffps1] = {
+		.pages = 1,
+		.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT |
+			PMBUS_HAVE_PIN | PMBUS_HAVE_FAN12 | PMBUS_HAVE_TEMP |
+			PMBUS_HAVE_TEMP2 | PMBUS_HAVE_TEMP3 |
+			PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT |
+			PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP |
+			PMBUS_HAVE_STATUS_FAN12,
+		.read_byte_data = ibm_cffps_read_byte_data,
+		.read_word_data = ibm_cffps_read_word_data,
+	},
+	[cffps2] = {
+		.pages = 2,
+		.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT |
+			PMBUS_HAVE_PIN | PMBUS_HAVE_FAN12 | PMBUS_HAVE_TEMP |
+			PMBUS_HAVE_TEMP2 | PMBUS_HAVE_TEMP3 |
+			PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT |
+			PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP |
+			PMBUS_HAVE_STATUS_FAN12 | PMBUS_HAVE_VMON,
+		.func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT |
+			PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_TEMP3 |
+			PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT,
+		.read_byte_data = ibm_cffps_read_byte_data,
+		.read_word_data = ibm_cffps_read_word_data,
+	},
+};
+
+static struct pmbus_platform_data ibm_cffps_pdata = {
+	.flags = PMBUS_SKIP_STATUS_CHECK | PMBUS_NO_CAPABILITY,
+};
+
+static int ibm_cffps_probe(struct i2c_client *client)
+{
+	int i, rc;
+	enum versions vs = cffps_unknown;
+	struct dentry *debugfs;
+	struct dentry *ibm_cffps_dir;
+	struct ibm_cffps *psu;
+	const void *md = of_device_get_match_data(&client->dev);
+	const struct i2c_device_id *id;
+
+	if (md) {
+		vs = (enum versions)md;
+	} else {
+		id = i2c_match_id(ibm_cffps_id, client);
+		if (id)
+			vs = (enum versions)id->driver_data;
+	}
+
+	if (vs == cffps_unknown) {
+		u16 ccin_revision = 0;
+		u16 ccin_version = CFFPS_CCIN_VERSION_1;
+		int ccin = i2c_smbus_read_word_swapped(client, CFFPS_CCIN_CMD);
+		char mfg_id[I2C_SMBUS_BLOCK_MAX + 2] = { 0 };
+
+		if (ccin > 0) {
+			ccin_revision = FIELD_GET(CFFPS_CCIN_REVISION, ccin);
+			ccin_version = FIELD_GET(CFFPS_CCIN_VERSION, ccin);
+		}
+
+		rc = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, mfg_id);
+		if (rc < 0) {
+			dev_err(&client->dev, "Failed to read Manufacturer ID\n");
+			return rc;
+		}
+
+		switch (ccin_version) {
+		default:
+		case CFFPS_CCIN_VERSION_1:
+			if ((strncmp(mfg_id, "ACBE", 4) == 0) ||
+				     (strncmp(mfg_id, "ARTE", 4) == 0))
+				vs = cffps1;
+			else
+				vs = cffps2;
+			break;
+		case CFFPS_CCIN_VERSION_2:
+			vs = cffps2;
+			break;
+		case CFFPS_CCIN_VERSION_3:
+			if (ccin_revision == CFFPS_CCIN_REVISION_LEGACY)
+				vs = cffps1;
+			else
+				vs = cffps2;
+			break;
+		}
+
+		/* Set the client name to include the version number. */
+		snprintf(client->name, I2C_NAME_SIZE, "cffps%d", vs + 1);
+	}
+
+	client->dev.platform_data = &ibm_cffps_pdata;
+	rc = pmbus_do_probe(client, &ibm_cffps_info[vs]);
+	if (rc)
+		return rc;
+
+	/*
+	 * Don't fail the probe if there isn't enough memory for leds and
+	 * debugfs.
+	 */
+	psu = devm_kzalloc(&client->dev, sizeof(*psu), GFP_KERNEL);
+	if (!psu)
+		return 0;
+
+	psu->version = vs;
+	psu->client = client;
+	mutex_init(&psu->input_history.update_lock);
+	psu->input_history.last_update = jiffies - HZ;
+
+	ibm_cffps_create_led_class(psu);
+
+	/* Don't fail the probe if we can't create debugfs */
+	debugfs = pmbus_get_debugfs_dir(client);
+	if (!debugfs)
+		return 0;
+
+	ibm_cffps_dir = debugfs_create_dir(client->name, debugfs);
+	if (!ibm_cffps_dir)
+		return 0;
+
+	for (i = 0; i < CFFPS_DEBUGFS_NUM_ENTRIES; ++i)
+		psu->debugfs_entries[i] = i;
+
+	debugfs_create_file("input_history", 0444, ibm_cffps_dir,
+			    &psu->debugfs_entries[CFFPS_DEBUGFS_INPUT_HISTORY],
+			    &ibm_cffps_fops);
+	debugfs_create_file("mfg_id", 0444, ibm_cffps_dir,
+			    &psu->debugfs_entries[CFFPS_DEBUGFS_MFG_ID],
+			    &ibm_cffps_fops);
+	debugfs_create_file("fru", 0444, ibm_cffps_dir,
+			    &psu->debugfs_entries[CFFPS_DEBUGFS_FRU],
+			    &ibm_cffps_fops);
+	debugfs_create_file("part_number", 0444, ibm_cffps_dir,
+			    &psu->debugfs_entries[CFFPS_DEBUGFS_PN],
+			    &ibm_cffps_fops);
+	debugfs_create_file("header", 0444, ibm_cffps_dir,
+			    &psu->debugfs_entries[CFFPS_DEBUGFS_HEADER],
+			    &ibm_cffps_fops);
+	debugfs_create_file("serial_number", 0444, ibm_cffps_dir,
+			    &psu->debugfs_entries[CFFPS_DEBUGFS_SN],
+			    &ibm_cffps_fops);
+	debugfs_create_file("max_power_out", 0444, ibm_cffps_dir,
+			    &psu->debugfs_entries[CFFPS_DEBUGFS_MAX_POWER_OUT],
+			    &ibm_cffps_fops);
+	debugfs_create_file("ccin", 0444, ibm_cffps_dir,
+			    &psu->debugfs_entries[CFFPS_DEBUGFS_CCIN],
+			    &ibm_cffps_fops);
+	debugfs_create_file("fw_version", 0444, ibm_cffps_dir,
+			    &psu->debugfs_entries[CFFPS_DEBUGFS_FW],
+			    &ibm_cffps_fops);
+	debugfs_create_file("on_off_config", 0644, ibm_cffps_dir,
+			    &psu->debugfs_entries[CFFPS_DEBUGFS_ON_OFF_CONFIG],
+			    &ibm_cffps_fops);
+
+	return 0;
+}
+
+static const struct i2c_device_id ibm_cffps_id[] = {
+	{ "ibm_cffps1", cffps1 },
+	{ "ibm_cffps2", cffps2 },
+	{ "ibm_cffps", cffps_unknown },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, ibm_cffps_id);
+
+static const struct of_device_id ibm_cffps_of_match[] = {
+	{
+		.compatible = "ibm,cffps1",
+		.data = (void *)cffps1
+	},
+	{
+		.compatible = "ibm,cffps2",
+		.data = (void *)cffps2
+	},
+	{
+		.compatible = "ibm,cffps",
+		.data = (void *)cffps_unknown
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(of, ibm_cffps_of_match);
+
+static struct i2c_driver ibm_cffps_driver = {
+	.driver = {
+		.name = "ibm-cffps",
+		.of_match_table = ibm_cffps_of_match,
+	},
+	.probe_new = ibm_cffps_probe,
+	.id_table = ibm_cffps_id,
+};
+
+module_i2c_driver(ibm_cffps_driver);
+
+MODULE_AUTHOR("Eddie James");
+MODULE_DESCRIPTION("PMBus driver for IBM Common Form Factor power supplies");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/inspur-ipsps.c b/drivers/hwmon/pmbus/inspur-ipsps.c
new file mode 100644
index 000000000..0f614e8d9
--- /dev/null
+++ b/drivers/hwmon/pmbus/inspur-ipsps.c
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2019 Inspur Corp.
+ */
+
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/pmbus.h>
+#include <linux/hwmon-sysfs.h>
+
+#include "pmbus.h"
+
+#define IPSPS_REG_VENDOR_ID	0x99
+#define IPSPS_REG_MODEL		0x9A
+#define IPSPS_REG_FW_VERSION	0x9B
+#define IPSPS_REG_PN		0x9C
+#define IPSPS_REG_SN		0x9E
+#define IPSPS_REG_HW_VERSION	0xB0
+#define IPSPS_REG_MODE		0xFC
+
+#define MODE_ACTIVE		0x55
+#define MODE_STANDBY		0x0E
+#define MODE_REDUNDANCY		0x00
+
+#define MODE_ACTIVE_STRING		"active"
+#define MODE_STANDBY_STRING		"standby"
+#define MODE_REDUNDANCY_STRING		"redundancy"
+
+enum ipsps_index {
+	vendor,
+	model,
+	fw_version,
+	part_number,
+	serial_number,
+	hw_version,
+	mode,
+	num_regs,
+};
+
+static const u8 ipsps_regs[num_regs] = {
+	[vendor] = IPSPS_REG_VENDOR_ID,
+	[model] = IPSPS_REG_MODEL,
+	[fw_version] = IPSPS_REG_FW_VERSION,
+	[part_number] = IPSPS_REG_PN,
+	[serial_number] = IPSPS_REG_SN,
+	[hw_version] = IPSPS_REG_HW_VERSION,
+	[mode] = IPSPS_REG_MODE,
+};
+
+static ssize_t ipsps_string_show(struct device *dev,
+				 struct device_attribute *devattr,
+				 char *buf)
+{
+	u8 reg;
+	int rc;
+	char *p;
+	char data[I2C_SMBUS_BLOCK_MAX + 1];
+	struct i2c_client *client = to_i2c_client(dev->parent);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+
+	reg = ipsps_regs[attr->index];
+	rc = i2c_smbus_read_block_data(client, reg, data);
+	if (rc < 0)
+		return rc;
+
+	/* filled with printable characters, ending with # */
+	p = memscan(data, '#', rc);
+	*p = '\0';
+
+	return sysfs_emit(buf, "%s\n", data);
+}
+
+static ssize_t ipsps_fw_version_show(struct device *dev,
+				     struct device_attribute *devattr,
+				     char *buf)
+{
+	u8 reg;
+	int rc;
+	u8 data[I2C_SMBUS_BLOCK_MAX] = { 0 };
+	struct i2c_client *client = to_i2c_client(dev->parent);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+
+	reg = ipsps_regs[attr->index];
+	rc = i2c_smbus_read_block_data(client, reg, data);
+	if (rc < 0)
+		return rc;
+
+	if (rc != 6)
+		return -EPROTO;
+
+	return sysfs_emit(buf, "%u.%02u%u-%u.%02u\n",
+			  data[1], data[2]/* < 100 */, data[3]/*< 10*/,
+			  data[4], data[5]/* < 100 */);
+}
+
+static ssize_t ipsps_mode_show(struct device *dev,
+			       struct device_attribute *devattr, char *buf)
+{
+	u8 reg;
+	int rc;
+	struct i2c_client *client = to_i2c_client(dev->parent);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+
+	reg = ipsps_regs[attr->index];
+	rc = i2c_smbus_read_byte_data(client, reg);
+	if (rc < 0)
+		return rc;
+
+	switch (rc) {
+	case MODE_ACTIVE:
+		return sysfs_emit(buf, "[%s] %s %s\n",
+				  MODE_ACTIVE_STRING,
+				  MODE_STANDBY_STRING, MODE_REDUNDANCY_STRING);
+	case MODE_STANDBY:
+		return sysfs_emit(buf, "%s [%s] %s\n",
+				  MODE_ACTIVE_STRING,
+				  MODE_STANDBY_STRING, MODE_REDUNDANCY_STRING);
+	case MODE_REDUNDANCY:
+		return sysfs_emit(buf, "%s %s [%s]\n",
+				  MODE_ACTIVE_STRING,
+				  MODE_STANDBY_STRING, MODE_REDUNDANCY_STRING);
+	default:
+		return sysfs_emit(buf, "unspecified\n");
+	}
+}
+
+static ssize_t ipsps_mode_store(struct device *dev,
+				struct device_attribute *devattr,
+				const char *buf, size_t count)
+{
+	u8 reg;
+	int rc;
+	struct i2c_client *client = to_i2c_client(dev->parent);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+
+	reg = ipsps_regs[attr->index];
+	if (sysfs_streq(MODE_STANDBY_STRING, buf)) {
+		rc = i2c_smbus_write_byte_data(client, reg,
+					       MODE_STANDBY);
+		if (rc < 0)
+			return rc;
+		return count;
+	} else if (sysfs_streq(MODE_ACTIVE_STRING, buf)) {
+		rc = i2c_smbus_write_byte_data(client, reg,
+					       MODE_ACTIVE);
+		if (rc < 0)
+			return rc;
+		return count;
+	}
+
+	return -EINVAL;
+}
+
+static SENSOR_DEVICE_ATTR_RO(vendor, ipsps_string, vendor);
+static SENSOR_DEVICE_ATTR_RO(model, ipsps_string, model);
+static SENSOR_DEVICE_ATTR_RO(part_number, ipsps_string, part_number);
+static SENSOR_DEVICE_ATTR_RO(serial_number, ipsps_string, serial_number);
+static SENSOR_DEVICE_ATTR_RO(hw_version, ipsps_string, hw_version);
+static SENSOR_DEVICE_ATTR_RO(fw_version, ipsps_fw_version, fw_version);
+static SENSOR_DEVICE_ATTR_RW(mode, ipsps_mode, mode);
+
+static struct attribute *ipsps_attrs[] = {
+	&sensor_dev_attr_vendor.dev_attr.attr,
+	&sensor_dev_attr_model.dev_attr.attr,
+	&sensor_dev_attr_part_number.dev_attr.attr,
+	&sensor_dev_attr_serial_number.dev_attr.attr,
+	&sensor_dev_attr_hw_version.dev_attr.attr,
+	&sensor_dev_attr_fw_version.dev_attr.attr,
+	&sensor_dev_attr_mode.dev_attr.attr,
+	NULL,
+};
+
+ATTRIBUTE_GROUPS(ipsps);
+
+static struct pmbus_driver_info ipsps_info = {
+	.pages = 1,
+	.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT |
+		PMBUS_HAVE_IIN | PMBUS_HAVE_POUT | PMBUS_HAVE_PIN |
+		PMBUS_HAVE_FAN12 | PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 |
+		PMBUS_HAVE_TEMP3 | PMBUS_HAVE_STATUS_VOUT |
+		PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_INPUT |
+		PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_STATUS_FAN12,
+	.groups = ipsps_groups,
+};
+
+static struct pmbus_platform_data ipsps_pdata = {
+	.flags = PMBUS_SKIP_STATUS_CHECK,
+};
+
+static int ipsps_probe(struct i2c_client *client)
+{
+	client->dev.platform_data = &ipsps_pdata;
+	return pmbus_do_probe(client, &ipsps_info);
+}
+
+static const struct i2c_device_id ipsps_id[] = {
+	{ "ipsps1", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, ipsps_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id ipsps_of_match[] = {
+	{ .compatible = "inspur,ipsps1" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, ipsps_of_match);
+#endif
+
+static struct i2c_driver ipsps_driver = {
+	.driver = {
+		.name = "inspur-ipsps",
+		.of_match_table = of_match_ptr(ipsps_of_match),
+	},
+	.probe_new = ipsps_probe,
+	.id_table = ipsps_id,
+};
+
+module_i2c_driver(ipsps_driver);
+
+MODULE_AUTHOR("John Wang");
+MODULE_DESCRIPTION("PMBus driver for Inspur Power System power supplies");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/ir35221.c b/drivers/hwmon/pmbus/ir35221.c
new file mode 100644
index 000000000..a6cf98e49
--- /dev/null
+++ b/drivers/hwmon/pmbus/ir35221.c
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Hardware monitoring driver for IR35221
+ *
+ * Copyright (C) IBM Corporation 2017.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include "pmbus.h"
+
+#define IR35221_MFR_VIN_PEAK		0xc5
+#define IR35221_MFR_VOUT_PEAK		0xc6
+#define IR35221_MFR_IOUT_PEAK		0xc7
+#define IR35221_MFR_TEMP_PEAK		0xc8
+#define IR35221_MFR_VIN_VALLEY		0xc9
+#define IR35221_MFR_VOUT_VALLEY		0xca
+#define IR35221_MFR_IOUT_VALLEY		0xcb
+#define IR35221_MFR_TEMP_VALLEY		0xcc
+
+static int ir35221_read_word_data(struct i2c_client *client, int page,
+				  int phase, int reg)
+{
+	int ret;
+
+	switch (reg) {
+	case PMBUS_VIRT_READ_VIN_MAX:
+		ret = pmbus_read_word_data(client, page, phase,
+					   IR35221_MFR_VIN_PEAK);
+		break;
+	case PMBUS_VIRT_READ_VOUT_MAX:
+		ret = pmbus_read_word_data(client, page, phase,
+					   IR35221_MFR_VOUT_PEAK);
+		break;
+	case PMBUS_VIRT_READ_IOUT_MAX:
+		ret = pmbus_read_word_data(client, page, phase,
+					   IR35221_MFR_IOUT_PEAK);
+		break;
+	case PMBUS_VIRT_READ_TEMP_MAX:
+		ret = pmbus_read_word_data(client, page, phase,
+					   IR35221_MFR_TEMP_PEAK);
+		break;
+	case PMBUS_VIRT_READ_VIN_MIN:
+		ret = pmbus_read_word_data(client, page, phase,
+					   IR35221_MFR_VIN_VALLEY);
+		break;
+	case PMBUS_VIRT_READ_VOUT_MIN:
+		ret = pmbus_read_word_data(client, page, phase,
+					   IR35221_MFR_VOUT_VALLEY);
+		break;
+	case PMBUS_VIRT_READ_IOUT_MIN:
+		ret = pmbus_read_word_data(client, page, phase,
+					   IR35221_MFR_IOUT_VALLEY);
+		break;
+	case PMBUS_VIRT_READ_TEMP_MIN:
+		ret = pmbus_read_word_data(client, page, phase,
+					   IR35221_MFR_TEMP_VALLEY);
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+
+	return ret;
+}
+
+static int ir35221_probe(struct i2c_client *client)
+{
+	struct pmbus_driver_info *info;
+	u8 buf[I2C_SMBUS_BLOCK_MAX];
+	int ret;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_READ_BYTE_DATA
+				| I2C_FUNC_SMBUS_READ_WORD_DATA
+				| I2C_FUNC_SMBUS_READ_BLOCK_DATA))
+		return -ENODEV;
+
+	ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, buf);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to read PMBUS_MFR_ID\n");
+		return ret;
+	}
+	if (ret != 2 || strncmp(buf, "RI", strlen("RI"))) {
+		dev_err(&client->dev, "MFR_ID unrecognised\n");
+		return -ENODEV;
+	}
+
+	ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, buf);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to read PMBUS_MFR_MODEL\n");
+		return ret;
+	}
+	if (ret != 2 || !(buf[0] == 0x6c && buf[1] == 0x00)) {
+		dev_err(&client->dev, "MFR_MODEL unrecognised\n");
+		return -ENODEV;
+	}
+
+	info = devm_kzalloc(&client->dev, sizeof(struct pmbus_driver_info),
+			    GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->read_word_data = ir35221_read_word_data;
+
+	info->pages = 2;
+	info->format[PSC_VOLTAGE_IN] = linear;
+	info->format[PSC_VOLTAGE_OUT] = linear;
+	info->format[PSC_CURRENT_IN] = linear;
+	info->format[PSC_CURRENT_OUT] = linear;
+	info->format[PSC_POWER] = linear;
+	info->format[PSC_TEMPERATURE] = linear;
+
+	info->func[0] = PMBUS_HAVE_VIN
+		| PMBUS_HAVE_VOUT | PMBUS_HAVE_IIN
+		| PMBUS_HAVE_IOUT | PMBUS_HAVE_PIN
+		| PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
+		| PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT
+		| PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP;
+	info->func[1] = info->func[0];
+
+	return pmbus_do_probe(client, info);
+}
+
+static const struct i2c_device_id ir35221_id[] = {
+	{"ir35221", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, ir35221_id);
+
+static struct i2c_driver ir35221_driver = {
+	.driver = {
+		.name	= "ir35221",
+	},
+	.probe_new	= ir35221_probe,
+	.id_table	= ir35221_id,
+};
+
+module_i2c_driver(ir35221_driver);
+
+MODULE_AUTHOR("Samuel Mendoza-Jonas <sam@mendozajonas.com");
+MODULE_DESCRIPTION("PMBus driver for IR35221");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/ir36021.c b/drivers/hwmon/pmbus/ir36021.c
new file mode 100644
index 000000000..4dca4767f
--- /dev/null
+++ b/drivers/hwmon/pmbus/ir36021.c
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Hardware monitoring driver for Infineon IR36021
+ *
+ * Copyright (c) 2021 Allied Telesis
+ */
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include "pmbus.h"
+
+static struct pmbus_driver_info ir36021_info = {
+	.pages = 1,
+	.format[PSC_VOLTAGE_IN] = linear,
+	.format[PSC_VOLTAGE_OUT] = linear,
+	.format[PSC_CURRENT_IN] = linear,
+	.format[PSC_CURRENT_OUT] = linear,
+	.format[PSC_POWER] = linear,
+	.format[PSC_TEMPERATURE] = linear,
+	.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT
+		| PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT
+		| PMBUS_HAVE_PIN | PMBUS_HAVE_POUT
+		| PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2
+		| PMBUS_HAVE_STATUS_TEMP,
+};
+
+static int ir36021_probe(struct i2c_client *client)
+{
+	u8 buf[I2C_SMBUS_BLOCK_MAX];
+	int ret;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_READ_BYTE_DATA
+				     | I2C_FUNC_SMBUS_READ_WORD_DATA
+				     | I2C_FUNC_SMBUS_READ_BLOCK_DATA))
+		return -ENODEV;
+
+	ret = i2c_smbus_read_i2c_block_data(client, PMBUS_MFR_MODEL, 2, buf);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to read PMBUS_MFR_MODEL\n");
+		return ret;
+	}
+	if (ret != 2 || buf[0] != 0x01 || buf[1] != 0x2d) {
+		dev_err(&client->dev, "MFR_MODEL unrecognised\n");
+		return -ENODEV;
+	}
+
+	return pmbus_do_probe(client, &ir36021_info);
+}
+
+static const struct i2c_device_id ir36021_id[] = {
+	{ "ir36021", 0 },
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, ir36021_id);
+
+static const struct of_device_id __maybe_unused ir36021_of_id[] = {
+	{ .compatible = "infineon,ir36021" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, ir36021_of_id);
+
+static struct i2c_driver ir36021_driver = {
+	.class = I2C_CLASS_HWMON,
+	.driver = {
+		.name = "ir36021",
+		.of_match_table = of_match_ptr(ir36021_of_id),
+	},
+	.probe_new = ir36021_probe,
+	.id_table = ir36021_id,
+};
+
+module_i2c_driver(ir36021_driver);
+
+MODULE_AUTHOR("Chris Packham <chris.packham@alliedtelesis.co.nz>");
+MODULE_DESCRIPTION("PMBus driver for Infineon IR36021");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/ir38064.c b/drivers/hwmon/pmbus/ir38064.c
new file mode 100644
index 000000000..09276e397
--- /dev/null
+++ b/drivers/hwmon/pmbus/ir38064.c
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Hardware monitoring driver for Infineon IR38064
+ *
+ * Copyright (c) 2017 Google Inc
+ *
+ * VOUT_MODE is not supported by the device. The driver fakes VOUT linear16
+ * mode with exponent value -8 as direct mode with m=256/b=0/R=0.
+ *          
+ * The device supports VOUT_PEAK, IOUT_PEAK, and TEMPERATURE_PEAK, however
+ * this driver does not currently support them.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regulator/driver.h>
+#include "pmbus.h"
+
+#if IS_ENABLED(CONFIG_SENSORS_IR38064_REGULATOR)
+static const struct regulator_desc ir38064_reg_desc[] = {
+	PMBUS_REGULATOR("vout", 0),
+};
+#endif /* CONFIG_SENSORS_IR38064_REGULATOR */
+
+static struct pmbus_driver_info ir38064_info = {
+	.pages = 1,
+	.format[PSC_VOLTAGE_IN] = linear,
+	.format[PSC_VOLTAGE_OUT] = direct,
+	.format[PSC_CURRENT_OUT] = linear,
+	.format[PSC_POWER] = linear,
+	.format[PSC_TEMPERATURE] = linear,
+	.m[PSC_VOLTAGE_OUT] = 256,
+	.b[PSC_VOLTAGE_OUT] = 0,
+	.R[PSC_VOLTAGE_OUT] = 0,
+	.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
+	    | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP
+	    | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+	    | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
+	    | PMBUS_HAVE_POUT,
+#if IS_ENABLED(CONFIG_SENSORS_IR38064_REGULATOR)
+	.num_regulators = 1,
+	.reg_desc = ir38064_reg_desc,
+#endif
+};
+
+static int ir38064_probe(struct i2c_client *client)
+{
+	return pmbus_do_probe(client, &ir38064_info);
+}
+
+static const struct i2c_device_id ir38064_id[] = {
+	{"ir38060", 0},
+	{"ir38064", 0},
+	{"ir38164", 0},
+	{"ir38263", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, ir38064_id);
+
+static const struct of_device_id __maybe_unused ir38064_of_match[] = {
+	{ .compatible = "infineon,ir38060" },
+	{ .compatible = "infineon,ir38064" },
+	{ .compatible = "infineon,ir38164" },
+	{ .compatible = "infineon,ir38263" },
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, ir38064_of_match);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver ir38064_driver = {
+	.driver = {
+		   .name = "ir38064",
+		   .of_match_table = of_match_ptr(ir38064_of_match),
+		   },
+	.probe_new = ir38064_probe,
+	.id_table = ir38064_id,
+};
+
+module_i2c_driver(ir38064_driver);
+
+MODULE_AUTHOR("Maxim Sloyko <maxims@google.com>");
+MODULE_DESCRIPTION("PMBus driver for Infineon IR38064 and compatible chips");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/irps5401.c b/drivers/hwmon/pmbus/irps5401.c
new file mode 100644
index 000000000..de3449e4d
--- /dev/null
+++ b/drivers/hwmon/pmbus/irps5401.c
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Hardware monitoring driver for the Infineon IRPS5401M PMIC.
+ *
+ * Copyright (c) 2019 SED Systems, a division of Calian Ltd.
+ *
+ * The device supports VOUT_PEAK, IOUT_PEAK, and TEMPERATURE_PEAK, however
+ * this driver does not currently support them.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include "pmbus.h"
+
+#define IRPS5401_SW_FUNC (PMBUS_HAVE_VIN | PMBUS_HAVE_IIN | \
+			  PMBUS_HAVE_STATUS_INPUT | \
+			  PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | \
+			  PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | \
+			  PMBUS_HAVE_PIN | PMBUS_HAVE_POUT | \
+			  PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP)
+
+#define IRPS5401_LDO_FUNC (PMBUS_HAVE_VIN | \
+			   PMBUS_HAVE_STATUS_INPUT | \
+			   PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | \
+			   PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | \
+			   PMBUS_HAVE_PIN | PMBUS_HAVE_POUT | \
+			   PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP)
+
+static struct pmbus_driver_info irps5401_info = {
+	.pages = 5,
+	.func[0] = IRPS5401_SW_FUNC,
+	.func[1] = IRPS5401_SW_FUNC,
+	.func[2] = IRPS5401_SW_FUNC,
+	.func[3] = IRPS5401_SW_FUNC,
+	.func[4] = IRPS5401_LDO_FUNC,
+};
+
+static int irps5401_probe(struct i2c_client *client)
+{
+	return pmbus_do_probe(client, &irps5401_info);
+}
+
+static const struct i2c_device_id irps5401_id[] = {
+	{"irps5401", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, irps5401_id);
+
+static struct i2c_driver irps5401_driver = {
+	.driver = {
+		   .name = "irps5401",
+		   },
+	.probe_new = irps5401_probe,
+	.id_table = irps5401_id,
+};
+
+module_i2c_driver(irps5401_driver);
+
+MODULE_AUTHOR("Robert Hancock");
+MODULE_DESCRIPTION("PMBus driver for Infineon IRPS5401");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/isl68137.c b/drivers/hwmon/pmbus/isl68137.c
new file mode 100644
index 000000000..1a8caff1a
--- /dev/null
+++ b/drivers/hwmon/pmbus/isl68137.c
@@ -0,0 +1,335 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Hardware monitoring driver for Renesas Digital Multiphase Voltage Regulators
+ *
+ * Copyright (c) 2017 Google Inc
+ * Copyright (c) 2020 Renesas Electronics America
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/sysfs.h>
+
+#include "pmbus.h"
+
+#define ISL68137_VOUT_AVS	0x30
+#define RAA_DMPVR2_READ_VMON	0xc8
+
+enum chips {
+	isl68137,
+	isl68220,
+	isl68221,
+	isl68222,
+	isl68223,
+	isl68224,
+	isl68225,
+	isl68226,
+	isl68227,
+	isl68229,
+	isl68233,
+	isl68239,
+	isl69222,
+	isl69223,
+	isl69224,
+	isl69225,
+	isl69227,
+	isl69228,
+	isl69234,
+	isl69236,
+	isl69239,
+	isl69242,
+	isl69243,
+	isl69247,
+	isl69248,
+	isl69254,
+	isl69255,
+	isl69256,
+	isl69259,
+	isl69260,
+	isl69268,
+	isl69269,
+	isl69298,
+	raa228000,
+	raa228004,
+	raa228006,
+	raa228228,
+	raa229001,
+	raa229004,
+};
+
+enum variants {
+	raa_dmpvr1_2rail,
+	raa_dmpvr2_1rail,
+	raa_dmpvr2_2rail,
+	raa_dmpvr2_2rail_nontc,
+	raa_dmpvr2_3rail,
+	raa_dmpvr2_hv,
+};
+
+static const struct i2c_device_id raa_dmpvr_id[];
+
+static ssize_t isl68137_avs_enable_show_page(struct i2c_client *client,
+					     int page,
+					     char *buf)
+{
+	int val = pmbus_read_byte_data(client, page, PMBUS_OPERATION);
+
+	return sprintf(buf, "%d\n",
+		       (val & ISL68137_VOUT_AVS) == ISL68137_VOUT_AVS ? 1 : 0);
+}
+
+static ssize_t isl68137_avs_enable_store_page(struct i2c_client *client,
+					      int page,
+					      const char *buf, size_t count)
+{
+	int rc, op_val;
+	bool result;
+
+	rc = kstrtobool(buf, &result);
+	if (rc)
+		return rc;
+
+	op_val = result ? ISL68137_VOUT_AVS : 0;
+
+	/*
+	 * Writes to VOUT setpoint over AVSBus will persist after the VRM is
+	 * switched to PMBus control. Switching back to AVSBus control
+	 * restores this persisted setpoint rather than re-initializing to
+	 * PMBus VOUT_COMMAND. Writing VOUT_COMMAND first over PMBus before
+	 * enabling AVS control is the workaround.
+	 */
+	if (op_val == ISL68137_VOUT_AVS) {
+		rc = pmbus_read_word_data(client, page, 0xff,
+					  PMBUS_VOUT_COMMAND);
+		if (rc < 0)
+			return rc;
+
+		rc = pmbus_write_word_data(client, page, PMBUS_VOUT_COMMAND,
+					   rc);
+		if (rc < 0)
+			return rc;
+	}
+
+	rc = pmbus_update_byte_data(client, page, PMBUS_OPERATION,
+				    ISL68137_VOUT_AVS, op_val);
+
+	return (rc < 0) ? rc : count;
+}
+
+static ssize_t isl68137_avs_enable_show(struct device *dev,
+					struct device_attribute *devattr,
+					char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev->parent);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+
+	return isl68137_avs_enable_show_page(client, attr->index, buf);
+}
+
+static ssize_t isl68137_avs_enable_store(struct device *dev,
+				struct device_attribute *devattr,
+				const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev->parent);
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+
+	return isl68137_avs_enable_store_page(client, attr->index, buf, count);
+}
+
+static SENSOR_DEVICE_ATTR_RW(avs0_enable, isl68137_avs_enable, 0);
+static SENSOR_DEVICE_ATTR_RW(avs1_enable, isl68137_avs_enable, 1);
+
+static struct attribute *enable_attrs[] = {
+	&sensor_dev_attr_avs0_enable.dev_attr.attr,
+	&sensor_dev_attr_avs1_enable.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group enable_group = {
+	.attrs = enable_attrs,
+};
+
+static const struct attribute_group *isl68137_attribute_groups[] = {
+	&enable_group,
+	NULL,
+};
+
+static int raa_dmpvr2_read_word_data(struct i2c_client *client, int page,
+				     int phase, int reg)
+{
+	int ret;
+
+	switch (reg) {
+	case PMBUS_VIRT_READ_VMON:
+		ret = pmbus_read_word_data(client, page, phase,
+					   RAA_DMPVR2_READ_VMON);
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+
+	return ret;
+}
+
+static struct pmbus_driver_info raa_dmpvr_info = {
+	.pages = 3,
+	.format[PSC_VOLTAGE_IN] = direct,
+	.format[PSC_VOLTAGE_OUT] = direct,
+	.format[PSC_CURRENT_IN] = direct,
+	.format[PSC_CURRENT_OUT] = direct,
+	.format[PSC_POWER] = direct,
+	.format[PSC_TEMPERATURE] = direct,
+	.m[PSC_VOLTAGE_IN] = 1,
+	.b[PSC_VOLTAGE_IN] = 0,
+	.R[PSC_VOLTAGE_IN] = 2,
+	.m[PSC_VOLTAGE_OUT] = 1,
+	.b[PSC_VOLTAGE_OUT] = 0,
+	.R[PSC_VOLTAGE_OUT] = 3,
+	.m[PSC_CURRENT_IN] = 1,
+	.b[PSC_CURRENT_IN] = 0,
+	.R[PSC_CURRENT_IN] = 2,
+	.m[PSC_CURRENT_OUT] = 1,
+	.b[PSC_CURRENT_OUT] = 0,
+	.R[PSC_CURRENT_OUT] = 1,
+	.m[PSC_POWER] = 1,
+	.b[PSC_POWER] = 0,
+	.R[PSC_POWER] = 0,
+	.m[PSC_TEMPERATURE] = 1,
+	.b[PSC_TEMPERATURE] = 0,
+	.R[PSC_TEMPERATURE] = 0,
+	.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN | PMBUS_HAVE_PIN
+	    | PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2
+	    | PMBUS_HAVE_TEMP3 | PMBUS_HAVE_STATUS_TEMP
+	    | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+	    | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_POUT
+		| PMBUS_HAVE_VMON,
+	.func[1] = PMBUS_HAVE_IIN | PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT
+	    | PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP3 | PMBUS_HAVE_STATUS_TEMP
+	    | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_IOUT
+	    | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_POUT,
+	.func[2] = PMBUS_HAVE_IIN | PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT
+	    | PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP3 | PMBUS_HAVE_STATUS_TEMP
+	    | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_IOUT
+	    | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_POUT,
+};
+
+static int isl68137_probe(struct i2c_client *client)
+{
+	struct pmbus_driver_info *info;
+
+	info = devm_kzalloc(&client->dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+	memcpy(info, &raa_dmpvr_info, sizeof(*info));
+
+	switch (i2c_match_id(raa_dmpvr_id, client)->driver_data) {
+	case raa_dmpvr1_2rail:
+		info->pages = 2;
+		info->R[PSC_VOLTAGE_IN] = 3;
+		info->func[0] &= ~PMBUS_HAVE_VMON;
+		info->func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		    | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
+		    | PMBUS_HAVE_POUT;
+		info->groups = isl68137_attribute_groups;
+		break;
+	case raa_dmpvr2_1rail:
+		info->pages = 1;
+		info->read_word_data = raa_dmpvr2_read_word_data;
+		break;
+	case raa_dmpvr2_2rail_nontc:
+		info->func[0] &= ~PMBUS_HAVE_TEMP3;
+		info->func[1] &= ~PMBUS_HAVE_TEMP3;
+		fallthrough;
+	case raa_dmpvr2_2rail:
+		info->pages = 2;
+		info->read_word_data = raa_dmpvr2_read_word_data;
+		break;
+	case raa_dmpvr2_3rail:
+		info->read_word_data = raa_dmpvr2_read_word_data;
+		break;
+	case raa_dmpvr2_hv:
+		info->pages = 1;
+		info->R[PSC_VOLTAGE_IN] = 1;
+		info->m[PSC_VOLTAGE_OUT] = 2;
+		info->R[PSC_VOLTAGE_OUT] = 2;
+		info->m[PSC_CURRENT_IN] = 2;
+		info->m[PSC_POWER] = 2;
+		info->R[PSC_POWER] = -1;
+		info->read_word_data = raa_dmpvr2_read_word_data;
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	return pmbus_do_probe(client, info);
+}
+
+static const struct i2c_device_id raa_dmpvr_id[] = {
+	{"isl68137", raa_dmpvr1_2rail},
+	{"isl68220", raa_dmpvr2_2rail},
+	{"isl68221", raa_dmpvr2_3rail},
+	{"isl68222", raa_dmpvr2_2rail},
+	{"isl68223", raa_dmpvr2_2rail},
+	{"isl68224", raa_dmpvr2_3rail},
+	{"isl68225", raa_dmpvr2_2rail},
+	{"isl68226", raa_dmpvr2_3rail},
+	{"isl68227", raa_dmpvr2_1rail},
+	{"isl68229", raa_dmpvr2_3rail},
+	{"isl68233", raa_dmpvr2_2rail},
+	{"isl68239", raa_dmpvr2_3rail},
+
+	{"isl69222", raa_dmpvr2_2rail},
+	{"isl69223", raa_dmpvr2_3rail},
+	{"isl69224", raa_dmpvr2_2rail},
+	{"isl69225", raa_dmpvr2_2rail},
+	{"isl69227", raa_dmpvr2_3rail},
+	{"isl69228", raa_dmpvr2_3rail},
+	{"isl69234", raa_dmpvr2_2rail},
+	{"isl69236", raa_dmpvr2_2rail},
+	{"isl69239", raa_dmpvr2_3rail},
+	{"isl69242", raa_dmpvr2_2rail},
+	{"isl69243", raa_dmpvr2_1rail},
+	{"isl69247", raa_dmpvr2_2rail},
+	{"isl69248", raa_dmpvr2_2rail},
+	{"isl69254", raa_dmpvr2_2rail},
+	{"isl69255", raa_dmpvr2_2rail},
+	{"isl69256", raa_dmpvr2_2rail},
+	{"isl69259", raa_dmpvr2_2rail},
+	{"isl69260", raa_dmpvr2_2rail},
+	{"isl69268", raa_dmpvr2_2rail},
+	{"isl69269", raa_dmpvr2_3rail},
+	{"isl69298", raa_dmpvr2_2rail},
+
+	{"raa228000", raa_dmpvr2_hv},
+	{"raa228004", raa_dmpvr2_hv},
+	{"raa228006", raa_dmpvr2_hv},
+	{"raa228228", raa_dmpvr2_2rail_nontc},
+	{"raa229001", raa_dmpvr2_2rail},
+	{"raa229004", raa_dmpvr2_2rail},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, raa_dmpvr_id);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver isl68137_driver = {
+	.driver = {
+		   .name = "isl68137",
+		   },
+	.probe_new = isl68137_probe,
+	.id_table = raa_dmpvr_id,
+};
+
+module_i2c_driver(isl68137_driver);
+
+MODULE_AUTHOR("Maxim Sloyko <maxims@google.com>");
+MODULE_DESCRIPTION("PMBus driver for Renesas digital multiphase voltage regulators");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/lm25066.c b/drivers/hwmon/pmbus/lm25066.c
new file mode 100644
index 000000000..09792cd03
--- /dev/null
+++ b/drivers/hwmon/pmbus/lm25066.c
@@ -0,0 +1,580 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Hardware monitoring driver for LM25056 / LM25066 / LM5064 / LM5066
+ *
+ * Copyright (c) 2011 Ericsson AB.
+ * Copyright (c) 2013 Guenter Roeck
+ */
+
+#include <linux/bitops.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/log2.h>
+#include <linux/of_device.h>
+#include "pmbus.h"
+
+enum chips { lm25056, lm25066, lm5064, lm5066, lm5066i };
+
+#define LM25066_READ_VAUX		0xd0
+#define LM25066_MFR_READ_IIN		0xd1
+#define LM25066_MFR_READ_PIN		0xd2
+#define LM25066_MFR_IIN_OC_WARN_LIMIT	0xd3
+#define LM25066_MFR_PIN_OP_WARN_LIMIT	0xd4
+#define LM25066_READ_PIN_PEAK		0xd5
+#define LM25066_CLEAR_PIN_PEAK		0xd6
+#define LM25066_DEVICE_SETUP		0xd9
+#define LM25066_READ_AVG_VIN		0xdc
+#define LM25066_SAMPLES_FOR_AVG		0xdb
+#define LM25066_READ_AVG_VOUT		0xdd
+#define LM25066_READ_AVG_IIN		0xde
+#define LM25066_READ_AVG_PIN		0xdf
+
+#define LM25066_DEV_SETUP_CL		BIT(4)	/* Current limit */
+
+#define LM25066_SAMPLES_FOR_AVG_MAX	4096
+
+/* LM25056 only */
+
+#define LM25056_VAUX_OV_WARN_LIMIT	0xe3
+#define LM25056_VAUX_UV_WARN_LIMIT	0xe4
+
+#define LM25056_MFR_STS_VAUX_OV_WARN	BIT(1)
+#define LM25056_MFR_STS_VAUX_UV_WARN	BIT(0)
+
+struct __coeff {
+	short m, b, R;
+};
+
+#define PSC_CURRENT_IN_L	(PSC_NUM_CLASSES)
+#define PSC_POWER_L		(PSC_NUM_CLASSES + 1)
+
+static const struct __coeff lm25066_coeff[][PSC_NUM_CLASSES + 2] = {
+	[lm25056] = {
+		[PSC_VOLTAGE_IN] = {
+			.m = 16296,
+			.b = 1343,
+			.R = -2,
+		},
+		[PSC_CURRENT_IN] = {
+			.m = 13797,
+			.b = -1833,
+			.R = -2,
+		},
+		[PSC_CURRENT_IN_L] = {
+			.m = 6726,
+			.b = -537,
+			.R = -2,
+		},
+		[PSC_POWER] = {
+			.m = 5501,
+			.b = -2908,
+			.R = -3,
+		},
+		[PSC_POWER_L] = {
+			.m = 26882,
+			.b = -5646,
+			.R = -4,
+		},
+		[PSC_TEMPERATURE] = {
+			.m = 1580,
+			.b = -14500,
+			.R = -2,
+		},
+	},
+	[lm25066] = {
+		[PSC_VOLTAGE_IN] = {
+			.m = 22070,
+			.b = -1800,
+			.R = -2,
+		},
+		[PSC_VOLTAGE_OUT] = {
+			.m = 22070,
+			.b = -1800,
+			.R = -2,
+		},
+		[PSC_CURRENT_IN] = {
+			.m = 13661,
+			.b = -5200,
+			.R = -2,
+		},
+		[PSC_CURRENT_IN_L] = {
+			.m = 6854,
+			.b = -3100,
+			.R = -2,
+		},
+		[PSC_POWER] = {
+			.m = 736,
+			.b = -3300,
+			.R = -2,
+		},
+		[PSC_POWER_L] = {
+			.m = 369,
+			.b = -1900,
+			.R = -2,
+		},
+		[PSC_TEMPERATURE] = {
+			.m = 16,
+		},
+	},
+	[lm5064] = {
+		[PSC_VOLTAGE_IN] = {
+			.m = 4611,
+			.b = -642,
+			.R = -2,
+		},
+		[PSC_VOLTAGE_OUT] = {
+			.m = 4621,
+			.b = 423,
+			.R = -2,
+		},
+		[PSC_CURRENT_IN] = {
+			.m = 10742,
+			.b = 1552,
+			.R = -2,
+		},
+		[PSC_CURRENT_IN_L] = {
+			.m = 5456,
+			.b = 2118,
+			.R = -2,
+		},
+		[PSC_POWER] = {
+			.m = 1204,
+			.b = 8524,
+			.R = -3,
+		},
+		[PSC_POWER_L] = {
+			.m = 612,
+			.b = 11202,
+			.R = -3,
+		},
+		[PSC_TEMPERATURE] = {
+			.m = 16,
+		},
+	},
+	[lm5066] = {
+		[PSC_VOLTAGE_IN] = {
+			.m = 4587,
+			.b = -1200,
+			.R = -2,
+		},
+		[PSC_VOLTAGE_OUT] = {
+			.m = 4587,
+			.b = -2400,
+			.R = -2,
+		},
+		[PSC_CURRENT_IN] = {
+			.m = 10753,
+			.b = -1200,
+			.R = -2,
+		},
+		[PSC_CURRENT_IN_L] = {
+			.m = 5405,
+			.b = -600,
+			.R = -2,
+		},
+		[PSC_POWER] = {
+			.m = 1204,
+			.b = -6000,
+			.R = -3,
+		},
+		[PSC_POWER_L] = {
+			.m = 605,
+			.b = -8000,
+			.R = -3,
+		},
+		[PSC_TEMPERATURE] = {
+			.m = 16,
+		},
+	},
+	[lm5066i] = {
+		[PSC_VOLTAGE_IN] = {
+			.m = 4617,
+			.b = -140,
+			.R = -2,
+		},
+		[PSC_VOLTAGE_OUT] = {
+			.m = 4602,
+			.b = 500,
+			.R = -2,
+		},
+		[PSC_CURRENT_IN] = {
+			.m = 15076,
+			.b = -504,
+			.R = -2,
+		},
+		[PSC_CURRENT_IN_L] = {
+			.m = 7645,
+			.b = 100,
+			.R = -2,
+		},
+		[PSC_POWER] = {
+			.m = 1701,
+			.b = -4000,
+			.R = -3,
+		},
+		[PSC_POWER_L] = {
+			.m = 861,
+			.b = -965,
+			.R = -3,
+		},
+		[PSC_TEMPERATURE] = {
+			.m = 16,
+		},
+	},
+};
+
+struct lm25066_data {
+	int id;
+	u16 rlimit;			/* Maximum register value */
+	struct pmbus_driver_info info;
+};
+
+#define to_lm25066_data(x)  container_of(x, struct lm25066_data, info)
+
+static int lm25066_read_word_data(struct i2c_client *client, int page,
+				  int phase, int reg)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	const struct lm25066_data *data = to_lm25066_data(info);
+	int ret;
+
+	switch (reg) {
+	case PMBUS_VIRT_READ_VMON:
+		ret = pmbus_read_word_data(client, 0, 0xff, LM25066_READ_VAUX);
+		if (ret < 0)
+			break;
+		/* Adjust returned value to match VIN coefficients */
+		switch (data->id) {
+		case lm25056:
+			/* VIN: 6.14 mV VAUX: 293 uV LSB */
+			ret = DIV_ROUND_CLOSEST(ret * 293, 6140);
+			break;
+		case lm25066:
+			/* VIN: 4.54 mV VAUX: 283.2 uV LSB */
+			ret = DIV_ROUND_CLOSEST(ret * 2832, 45400);
+			break;
+		case lm5064:
+			/* VIN: 4.53 mV VAUX: 700 uV LSB */
+			ret = DIV_ROUND_CLOSEST(ret * 70, 453);
+			break;
+		case lm5066:
+		case lm5066i:
+			/* VIN: 2.18 mV VAUX: 725 uV LSB */
+			ret = DIV_ROUND_CLOSEST(ret * 725, 2180);
+			break;
+		}
+		break;
+	case PMBUS_READ_IIN:
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   LM25066_MFR_READ_IIN);
+		break;
+	case PMBUS_READ_PIN:
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   LM25066_MFR_READ_PIN);
+		break;
+	case PMBUS_IIN_OC_WARN_LIMIT:
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   LM25066_MFR_IIN_OC_WARN_LIMIT);
+		break;
+	case PMBUS_PIN_OP_WARN_LIMIT:
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   LM25066_MFR_PIN_OP_WARN_LIMIT);
+		break;
+	case PMBUS_VIRT_READ_VIN_AVG:
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   LM25066_READ_AVG_VIN);
+		break;
+	case PMBUS_VIRT_READ_VOUT_AVG:
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   LM25066_READ_AVG_VOUT);
+		break;
+	case PMBUS_VIRT_READ_IIN_AVG:
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   LM25066_READ_AVG_IIN);
+		break;
+	case PMBUS_VIRT_READ_PIN_AVG:
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   LM25066_READ_AVG_PIN);
+		break;
+	case PMBUS_VIRT_READ_PIN_MAX:
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   LM25066_READ_PIN_PEAK);
+		break;
+	case PMBUS_VIRT_RESET_PIN_HISTORY:
+		ret = 0;
+		break;
+	case PMBUS_VIRT_SAMPLES:
+		ret = pmbus_read_byte_data(client, 0, LM25066_SAMPLES_FOR_AVG);
+		if (ret < 0)
+			break;
+		ret = 1 << ret;
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
+static int lm25056_read_word_data(struct i2c_client *client, int page,
+				  int phase, int reg)
+{
+	int ret;
+
+	switch (reg) {
+	case PMBUS_VIRT_VMON_UV_WARN_LIMIT:
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   LM25056_VAUX_UV_WARN_LIMIT);
+		if (ret < 0)
+			break;
+		/* Adjust returned value to match VIN coefficients */
+		ret = DIV_ROUND_CLOSEST(ret * 293, 6140);
+		break;
+	case PMBUS_VIRT_VMON_OV_WARN_LIMIT:
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   LM25056_VAUX_OV_WARN_LIMIT);
+		if (ret < 0)
+			break;
+		/* Adjust returned value to match VIN coefficients */
+		ret = DIV_ROUND_CLOSEST(ret * 293, 6140);
+		break;
+	default:
+		ret = lm25066_read_word_data(client, page, phase, reg);
+		break;
+	}
+	return ret;
+}
+
+static int lm25056_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+	int ret, s;
+
+	switch (reg) {
+	case PMBUS_VIRT_STATUS_VMON:
+		ret = pmbus_read_byte_data(client, 0,
+					   PMBUS_STATUS_MFR_SPECIFIC);
+		if (ret < 0)
+			break;
+		s = 0;
+		if (ret & LM25056_MFR_STS_VAUX_UV_WARN)
+			s |= PB_VOLTAGE_UV_WARNING;
+		if (ret & LM25056_MFR_STS_VAUX_OV_WARN)
+			s |= PB_VOLTAGE_OV_WARNING;
+		ret = s;
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
+static int lm25066_write_word_data(struct i2c_client *client, int page, int reg,
+				   u16 word)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	const struct lm25066_data *data = to_lm25066_data(info);
+	int ret;
+
+	switch (reg) {
+	case PMBUS_POUT_OP_FAULT_LIMIT:
+	case PMBUS_POUT_OP_WARN_LIMIT:
+	case PMBUS_VOUT_UV_WARN_LIMIT:
+	case PMBUS_OT_FAULT_LIMIT:
+	case PMBUS_OT_WARN_LIMIT:
+	case PMBUS_IIN_OC_FAULT_LIMIT:
+	case PMBUS_VIN_UV_WARN_LIMIT:
+	case PMBUS_VIN_UV_FAULT_LIMIT:
+	case PMBUS_VIN_OV_FAULT_LIMIT:
+	case PMBUS_VIN_OV_WARN_LIMIT:
+		word = ((s16)word < 0) ? 0 : clamp_val(word, 0, data->rlimit);
+		ret = pmbus_write_word_data(client, 0, reg, word);
+		break;
+	case PMBUS_IIN_OC_WARN_LIMIT:
+		word = ((s16)word < 0) ? 0 : clamp_val(word, 0, data->rlimit);
+		ret = pmbus_write_word_data(client, 0,
+					    LM25066_MFR_IIN_OC_WARN_LIMIT,
+					    word);
+		break;
+	case PMBUS_PIN_OP_WARN_LIMIT:
+		word = ((s16)word < 0) ? 0 : clamp_val(word, 0, data->rlimit);
+		ret = pmbus_write_word_data(client, 0,
+					    LM25066_MFR_PIN_OP_WARN_LIMIT,
+					    word);
+		break;
+	case PMBUS_VIRT_VMON_UV_WARN_LIMIT:
+		/* Adjust from VIN coefficients (for LM25056) */
+		word = DIV_ROUND_CLOSEST((int)word * 6140, 293);
+		word = ((s16)word < 0) ? 0 : clamp_val(word, 0, data->rlimit);
+		ret = pmbus_write_word_data(client, 0,
+					    LM25056_VAUX_UV_WARN_LIMIT, word);
+		break;
+	case PMBUS_VIRT_VMON_OV_WARN_LIMIT:
+		/* Adjust from VIN coefficients (for LM25056) */
+		word = DIV_ROUND_CLOSEST((int)word * 6140, 293);
+		word = ((s16)word < 0) ? 0 : clamp_val(word, 0, data->rlimit);
+		ret = pmbus_write_word_data(client, 0,
+					    LM25056_VAUX_OV_WARN_LIMIT, word);
+		break;
+	case PMBUS_VIRT_RESET_PIN_HISTORY:
+		ret = pmbus_write_byte(client, 0, LM25066_CLEAR_PIN_PEAK);
+		break;
+	case PMBUS_VIRT_SAMPLES:
+		word = clamp_val(word, 1, LM25066_SAMPLES_FOR_AVG_MAX);
+		ret = pmbus_write_byte_data(client, 0, LM25066_SAMPLES_FOR_AVG,
+					    ilog2(word));
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
+#if IS_ENABLED(CONFIG_SENSORS_LM25066_REGULATOR)
+static const struct regulator_desc lm25066_reg_desc[] = {
+	PMBUS_REGULATOR("vout", 0),
+};
+#endif
+
+static const struct i2c_device_id lm25066_id[] = {
+	{"lm25056", lm25056},
+	{"lm25066", lm25066},
+	{"lm5064", lm5064},
+	{"lm5066", lm5066},
+	{"lm5066i", lm5066i},
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, lm25066_id);
+
+static const struct of_device_id __maybe_unused lm25066_of_match[] = {
+	{ .compatible = "ti,lm25056", .data = (void *)lm25056, },
+	{ .compatible = "ti,lm25066", .data = (void *)lm25066, },
+	{ .compatible = "ti,lm5064",  .data = (void *)lm5064,  },
+	{ .compatible = "ti,lm5066",  .data = (void *)lm5066,  },
+	{ .compatible = "ti,lm5066i", .data = (void *)lm5066i, },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, lm25066_of_match);
+
+static int lm25066_probe(struct i2c_client *client)
+{
+	int config;
+	u32 shunt;
+	struct lm25066_data *data;
+	struct pmbus_driver_info *info;
+	const struct __coeff *coeff;
+	const struct of_device_id *of_id;
+	const struct i2c_device_id *i2c_id;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_READ_BYTE_DATA))
+		return -ENODEV;
+
+	data = devm_kzalloc(&client->dev, sizeof(struct lm25066_data),
+			    GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	config = i2c_smbus_read_byte_data(client, LM25066_DEVICE_SETUP);
+	if (config < 0)
+		return config;
+
+	i2c_id = i2c_match_id(lm25066_id, client);
+
+	of_id = of_match_device(lm25066_of_match, &client->dev);
+	if (of_id && (unsigned long)of_id->data != i2c_id->driver_data)
+		dev_notice(&client->dev, "Device mismatch: %s in device tree, %s detected\n",
+			   of_id->name, i2c_id->name);
+
+	data->id = i2c_id->driver_data;
+	info = &data->info;
+
+	info->pages = 1;
+	info->format[PSC_VOLTAGE_IN] = direct;
+	info->format[PSC_VOLTAGE_OUT] = direct;
+	info->format[PSC_CURRENT_IN] = direct;
+	info->format[PSC_TEMPERATURE] = direct;
+	info->format[PSC_POWER] = direct;
+
+	info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VMON
+	  | PMBUS_HAVE_PIN | PMBUS_HAVE_IIN | PMBUS_HAVE_STATUS_INPUT
+	  | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_SAMPLES;
+
+	if (data->id == lm25056) {
+		info->func[0] |= PMBUS_HAVE_STATUS_VMON;
+		info->read_word_data = lm25056_read_word_data;
+		info->read_byte_data = lm25056_read_byte_data;
+		data->rlimit = 0x0fff;
+	} else {
+		info->func[0] |= PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
+		info->read_word_data = lm25066_read_word_data;
+		data->rlimit = 0x0fff;
+	}
+	info->write_word_data = lm25066_write_word_data;
+
+	coeff = &lm25066_coeff[data->id][0];
+	info->m[PSC_TEMPERATURE] = coeff[PSC_TEMPERATURE].m;
+	info->b[PSC_TEMPERATURE] = coeff[PSC_TEMPERATURE].b;
+	info->R[PSC_TEMPERATURE] = coeff[PSC_TEMPERATURE].R;
+	info->m[PSC_VOLTAGE_IN] = coeff[PSC_VOLTAGE_IN].m;
+	info->b[PSC_VOLTAGE_IN] = coeff[PSC_VOLTAGE_IN].b;
+	info->R[PSC_VOLTAGE_IN] = coeff[PSC_VOLTAGE_IN].R;
+	info->m[PSC_VOLTAGE_OUT] = coeff[PSC_VOLTAGE_OUT].m;
+	info->b[PSC_VOLTAGE_OUT] = coeff[PSC_VOLTAGE_OUT].b;
+	info->R[PSC_VOLTAGE_OUT] = coeff[PSC_VOLTAGE_OUT].R;
+	info->R[PSC_CURRENT_IN] = coeff[PSC_CURRENT_IN].R;
+	info->R[PSC_POWER] = coeff[PSC_POWER].R;
+	if (config & LM25066_DEV_SETUP_CL) {
+		info->m[PSC_CURRENT_IN] = coeff[PSC_CURRENT_IN_L].m;
+		info->b[PSC_CURRENT_IN] = coeff[PSC_CURRENT_IN_L].b;
+		info->m[PSC_POWER] = coeff[PSC_POWER_L].m;
+		info->b[PSC_POWER] = coeff[PSC_POWER_L].b;
+	} else {
+		info->m[PSC_CURRENT_IN] = coeff[PSC_CURRENT_IN].m;
+		info->b[PSC_CURRENT_IN] = coeff[PSC_CURRENT_IN].b;
+		info->m[PSC_POWER] = coeff[PSC_POWER].m;
+		info->b[PSC_POWER] = coeff[PSC_POWER].b;
+	}
+
+	/*
+	 * Values in the TI datasheets are normalized for a 1mOhm sense
+	 * resistor; assume that unless DT specifies a value explicitly.
+	 */
+	if (of_property_read_u32(client->dev.of_node, "shunt-resistor-micro-ohms", &shunt))
+		shunt = 1000;
+
+	info->m[PSC_CURRENT_IN] = info->m[PSC_CURRENT_IN] * shunt / 1000;
+	info->m[PSC_POWER] = info->m[PSC_POWER] * shunt / 1000;
+
+#if IS_ENABLED(CONFIG_SENSORS_LM25066_REGULATOR)
+	/* LM25056 doesn't support OPERATION */
+	if (data->id != lm25056) {
+		info->num_regulators = ARRAY_SIZE(lm25066_reg_desc);
+		info->reg_desc = lm25066_reg_desc;
+	}
+#endif
+
+	return pmbus_do_probe(client, info);
+}
+
+/* This is the driver that will be inserted */
+static struct i2c_driver lm25066_driver = {
+	.driver = {
+		   .name = "lm25066",
+		   .of_match_table = of_match_ptr(lm25066_of_match),
+	},
+	.probe_new = lm25066_probe,
+	.id_table = lm25066_id,
+};
+
+module_i2c_driver(lm25066_driver);
+
+MODULE_AUTHOR("Guenter Roeck");
+MODULE_DESCRIPTION("PMBus driver for LM25066 and compatible chips");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/lt7182s.c b/drivers/hwmon/pmbus/lt7182s.c
new file mode 100644
index 000000000..4cfe476fc
--- /dev/null
+++ b/drivers/hwmon/pmbus/lt7182s.c
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Hardware monitoring driver for Analog Devices LT7182S
+ *
+ * Copyright (c) 2022 Guenter Roeck
+ *
+ */
+
+#include <linux/bits.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include "pmbus.h"
+
+#define LT7182S_NUM_PAGES	2
+
+#define MFR_READ_EXTVCC		0xcd
+#define MFR_READ_ITH		0xce
+#define MFR_CONFIG_ALL_LT7182S	0xd1
+#define MFR_IOUT_PEAK		0xd7
+#define MFR_ADC_CONTROL_LT7182S 0xd8
+
+#define MFR_DEBUG_TELEMETRY	BIT(0)
+
+#define MFR_VOUT_PEAK		0xdd
+#define MFR_VIN_PEAK		0xde
+#define MFR_TEMPERATURE_1_PEAK	0xdf
+#define MFR_CLEAR_PEAKS		0xe3
+
+#define MFR_CONFIG_IEEE		BIT(8)
+
+static int lt7182s_read_word_data(struct i2c_client *client, int page, int phase, int reg)
+{
+	int ret;
+
+	switch (reg) {
+	case PMBUS_VIRT_READ_VMON:
+		if (page == 0 || page == 1)
+			ret = pmbus_read_word_data(client, page, phase, MFR_READ_ITH);
+		else
+			ret = pmbus_read_word_data(client, 0, phase, MFR_READ_EXTVCC);
+		break;
+	case PMBUS_VIRT_READ_IOUT_MAX:
+		ret = pmbus_read_word_data(client, page, phase, MFR_IOUT_PEAK);
+		break;
+	case PMBUS_VIRT_READ_VOUT_MAX:
+		ret = pmbus_read_word_data(client, page, phase, MFR_VOUT_PEAK);
+		break;
+	case PMBUS_VIRT_READ_VIN_MAX:
+		ret = pmbus_read_word_data(client, page, phase, MFR_VIN_PEAK);
+		break;
+	case PMBUS_VIRT_READ_TEMP_MAX:
+		ret = pmbus_read_word_data(client, page, phase, MFR_TEMPERATURE_1_PEAK);
+		break;
+	case PMBUS_VIRT_RESET_VIN_HISTORY:
+		ret = (page == 0) ? 0 : -ENODATA;
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
+static int lt7182s_write_word_data(struct i2c_client *client, int page, int reg, u16 word)
+{
+	int ret;
+
+	switch (reg) {
+	case PMBUS_VIRT_RESET_VIN_HISTORY:
+		ret = pmbus_write_byte(client, 0, MFR_CLEAR_PEAKS);
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
+static struct pmbus_driver_info lt7182s_info = {
+	.pages = LT7182S_NUM_PAGES,
+	.format[PSC_VOLTAGE_IN] = linear,
+	.format[PSC_VOLTAGE_OUT] = linear,
+	.format[PSC_CURRENT_IN] = linear,
+	.format[PSC_CURRENT_OUT] = linear,
+	.format[PSC_TEMPERATURE] = linear,
+	.format[PSC_POWER] = linear,
+	.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT |
+	  PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_POUT |
+	  PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT |
+	  PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP,
+	.func[1] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT |
+	  PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_POUT |
+	  PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT |
+	  PMBUS_HAVE_STATUS_INPUT,
+	.read_word_data = lt7182s_read_word_data,
+	.write_word_data = lt7182s_write_word_data,
+};
+
+static int lt7182s_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct pmbus_driver_info *info;
+	u8 buf[I2C_SMBUS_BLOCK_MAX + 1];
+	int ret;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_READ_BYTE_DATA |
+				     I2C_FUNC_SMBUS_READ_WORD_DATA |
+				     I2C_FUNC_SMBUS_READ_BLOCK_DATA))
+		return -ENODEV;
+
+	ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, buf);
+	if (ret < 0) {
+		dev_err(dev, "Failed to read PMBUS_MFR_ID\n");
+		return ret;
+	}
+	if (ret != 3 || strncmp(buf, "ADI", 3)) {
+		buf[ret] = '\0';
+		dev_err(dev, "Manufacturer '%s' not supported\n", buf);
+		return -ENODEV;
+	}
+
+	ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, buf);
+	if (ret < 0) {
+		dev_err(dev, "Failed to read PMBUS_MFR_MODEL\n");
+		return ret;
+	}
+	if (ret != 7 || strncmp(buf, "LT7182S", 7)) {
+		buf[ret] = '\0';
+		dev_err(dev, "Model '%s' not supported\n", buf);
+		return -ENODEV;
+	}
+
+	info = devm_kmemdup(dev, &lt7182s_info,
+			    sizeof(struct pmbus_driver_info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	/* Set data format to IEEE754 if configured */
+	ret = i2c_smbus_read_word_data(client, MFR_CONFIG_ALL_LT7182S);
+	if (ret < 0)
+		return ret;
+	if (ret & MFR_CONFIG_IEEE) {
+		info->format[PSC_VOLTAGE_IN] = ieee754;
+		info->format[PSC_VOLTAGE_OUT] = ieee754;
+		info->format[PSC_CURRENT_IN] = ieee754;
+		info->format[PSC_CURRENT_OUT] = ieee754;
+		info->format[PSC_TEMPERATURE] = ieee754;
+		info->format[PSC_POWER] = ieee754;
+	}
+
+	/* Enable VMON output if configured */
+	ret = i2c_smbus_read_byte_data(client, MFR_ADC_CONTROL_LT7182S);
+	if (ret < 0)
+		return ret;
+	if (ret & MFR_DEBUG_TELEMETRY) {
+		info->pages = 3;
+		info->func[0] |= PMBUS_HAVE_VMON;
+		info->func[1] |= PMBUS_HAVE_VMON;
+		info->func[2] = PMBUS_HAVE_VMON;
+	}
+
+	return pmbus_do_probe(client, info);
+}
+
+static const struct i2c_device_id lt7182s_id[] = {
+	{ "lt7182s", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, lt7182s_id);
+
+static const struct of_device_id __maybe_unused lt7182s_of_match[] = {
+	{ .compatible = "adi,lt7182s" },
+	{}
+};
+
+static struct i2c_driver lt7182s_driver = {
+	.driver = {
+		.name = "lt7182s",
+		.of_match_table = of_match_ptr(lt7182s_of_match),
+	},
+	.probe_new = lt7182s_probe,
+	.id_table = lt7182s_id,
+};
+
+module_i2c_driver(lt7182s_driver);
+
+MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
+MODULE_DESCRIPTION("PMBus driver for Analog Devices LT7182S");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/ltc2978.c b/drivers/hwmon/pmbus/ltc2978.c
new file mode 100644
index 000000000..6d2592731
--- /dev/null
+++ b/drivers/hwmon/pmbus/ltc2978.c
@@ -0,0 +1,934 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Hardware monitoring driver for LTC2978 and compatible chips.
+ *
+ * Copyright (c) 2011 Ericsson AB.
+ * Copyright (c) 2013, 2014, 2015 Guenter Roeck
+ * Copyright (c) 2015 Linear Technology
+ * Copyright (c) 2018 Analog Devices Inc.
+ */
+
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/regulator/driver.h>
+#include "pmbus.h"
+
+enum chips {
+	/* Managers */
+	ltc2972, ltc2974, ltc2975, ltc2977, ltc2978, ltc2979, ltc2980,
+	/* Controllers */
+	ltc3880, ltc3882, ltc3883, ltc3884, ltc3886, ltc3887, ltc3889, ltc7880,
+	/* Modules */
+	ltm2987, ltm4664, ltm4675, ltm4676, ltm4677, ltm4678, ltm4680, ltm4686,
+	ltm4700,
+};
+
+/* Common for all chips */
+#define LTC2978_MFR_VOUT_PEAK		0xdd
+#define LTC2978_MFR_VIN_PEAK		0xde
+#define LTC2978_MFR_TEMPERATURE_PEAK	0xdf
+#define LTC2978_MFR_SPECIAL_ID		0xe7	/* Undocumented on LTC3882 */
+#define LTC2978_MFR_COMMON		0xef
+
+/* LTC2974, LTC2975, LCT2977, LTC2980, LTC2978, and LTM2987 */
+#define LTC2978_MFR_VOUT_MIN		0xfb
+#define LTC2978_MFR_VIN_MIN		0xfc
+#define LTC2978_MFR_TEMPERATURE_MIN	0xfd
+
+/* LTC2974, LTC2975 */
+#define LTC2974_MFR_IOUT_PEAK		0xd7
+#define LTC2974_MFR_IOUT_MIN		0xd8
+
+/* LTC3880, LTC3882, LTC3883, LTC3887, LTM4675, and LTM4676 */
+#define LTC3880_MFR_IOUT_PEAK		0xd7
+#define LTC3880_MFR_CLEAR_PEAKS		0xe3
+#define LTC3880_MFR_TEMPERATURE2_PEAK	0xf4
+
+/* LTC3883, LTC3884, LTC3886, LTC3889 and LTC7880 only */
+#define LTC3883_MFR_IIN_PEAK		0xe1
+
+
+/* LTC2975 only */
+#define LTC2975_MFR_IIN_PEAK		0xc4
+#define LTC2975_MFR_IIN_MIN		0xc5
+#define LTC2975_MFR_PIN_PEAK		0xc6
+#define LTC2975_MFR_PIN_MIN		0xc7
+
+#define LTC2978_ID_MASK			0xfff0
+
+#define LTC2972_ID			0x0310
+#define LTC2974_ID			0x0210
+#define LTC2975_ID			0x0220
+#define LTC2977_ID			0x0130
+#define LTC2978_ID_REV1			0x0110	/* Early revision */
+#define LTC2978_ID_REV2			0x0120
+#define LTC2979_ID_A			0x8060
+#define LTC2979_ID_B			0x8070
+#define LTC2980_ID_A			0x8030	/* A/B for two die IDs */
+#define LTC2980_ID_B			0x8040
+#define LTC3880_ID			0x4020
+#define LTC3882_ID			0x4200
+#define LTC3882_ID_D1			0x4240	/* Dash 1 */
+#define LTC3883_ID			0x4300
+#define LTC3884_ID			0x4C00
+#define LTC3886_ID			0x4600
+#define LTC3887_ID			0x4700
+#define LTM2987_ID_A			0x8010	/* A/B for two die IDs */
+#define LTM2987_ID_B			0x8020
+#define LTC3889_ID			0x4900
+#define LTC7880_ID			0x49E0
+#define LTM4664_ID			0x4120
+#define LTM4675_ID			0x47a0
+#define LTM4676_ID_REV1			0x4400
+#define LTM4676_ID_REV2			0x4480
+#define LTM4676A_ID			0x47e0
+#define LTM4677_ID_REV1			0x47B0
+#define LTM4677_ID_REV2			0x47D0
+#define LTM4678_ID_REV1			0x4100
+#define LTM4678_ID_REV2			0x4110
+#define LTM4680_ID			0x4140
+#define LTM4686_ID			0x4770
+#define LTM4700_ID			0x4130
+
+#define LTC2972_NUM_PAGES		2
+#define LTC2974_NUM_PAGES		4
+#define LTC2978_NUM_PAGES		8
+#define LTC3880_NUM_PAGES		2
+#define LTC3883_NUM_PAGES		1
+
+#define LTC_POLL_TIMEOUT		100	/* in milli-seconds */
+
+#define LTC_NOT_BUSY			BIT(6)
+#define LTC_NOT_PENDING			BIT(5)
+
+/*
+ * LTC2978 clears peak data whenever the CLEAR_FAULTS command is executed, which
+ * happens pretty much each time chip data is updated. Raw peak data therefore
+ * does not provide much value. To be able to provide useful peak data, keep an
+ * internal cache of measured peak data, which is only cleared if an explicit
+ * "clear peak" command is executed for the sensor in question.
+ */
+
+struct ltc2978_data {
+	enum chips id;
+	u16 vin_min, vin_max;
+	u16 temp_min[LTC2974_NUM_PAGES], temp_max[LTC2974_NUM_PAGES];
+	u16 vout_min[LTC2978_NUM_PAGES], vout_max[LTC2978_NUM_PAGES];
+	u16 iout_min[LTC2974_NUM_PAGES], iout_max[LTC2974_NUM_PAGES];
+	u16 iin_min, iin_max;
+	u16 pin_min, pin_max;
+	u16 temp2_max;
+	struct pmbus_driver_info info;
+	u32 features;
+};
+#define to_ltc2978_data(x)  container_of(x, struct ltc2978_data, info)
+
+#define FEAT_CLEAR_PEAKS	BIT(0)
+#define FEAT_NEEDS_POLLING	BIT(1)
+
+#define has_clear_peaks(d)	((d)->features & FEAT_CLEAR_PEAKS)
+#define needs_polling(d)	((d)->features & FEAT_NEEDS_POLLING)
+
+static int ltc_wait_ready(struct i2c_client *client)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(LTC_POLL_TIMEOUT);
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	struct ltc2978_data *data = to_ltc2978_data(info);
+	int status;
+	u8 mask;
+
+	if (!needs_polling(data))
+		return 0;
+
+	/*
+	 * LTC3883 does not support LTC_NOT_PENDING, even though
+	 * the datasheet claims that it does.
+	 */
+	mask = LTC_NOT_BUSY;
+	if (data->id != ltc3883)
+		mask |= LTC_NOT_PENDING;
+
+	do {
+		status = pmbus_read_byte_data(client, 0, LTC2978_MFR_COMMON);
+		if (status == -EBADMSG || status == -ENXIO) {
+			/* PEC error or NACK: chip may be busy, try again */
+			usleep_range(50, 100);
+			continue;
+		}
+		if (status < 0)
+			return status;
+
+		if ((status & mask) == mask)
+			return 0;
+
+		usleep_range(50, 100);
+	} while (time_before(jiffies, timeout));
+
+	return -ETIMEDOUT;
+}
+
+static int ltc_read_word_data(struct i2c_client *client, int page, int phase,
+			      int reg)
+{
+	int ret;
+
+	ret = ltc_wait_ready(client);
+	if (ret < 0)
+		return ret;
+
+	return pmbus_read_word_data(client, page, 0xff, reg);
+}
+
+static int ltc_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+	int ret;
+
+	ret = ltc_wait_ready(client);
+	if (ret < 0)
+		return ret;
+
+	return pmbus_read_byte_data(client, page, reg);
+}
+
+static int ltc_write_byte_data(struct i2c_client *client, int page, int reg, u8 value)
+{
+	int ret;
+
+	ret = ltc_wait_ready(client);
+	if (ret < 0)
+		return ret;
+
+	return pmbus_write_byte_data(client, page, reg, value);
+}
+
+static int ltc_write_byte(struct i2c_client *client, int page, u8 byte)
+{
+	int ret;
+
+	ret = ltc_wait_ready(client);
+	if (ret < 0)
+		return ret;
+
+	return pmbus_write_byte(client, page, byte);
+}
+
+static inline int lin11_to_val(int data)
+{
+	s16 e = ((s16)data) >> 11;
+	s32 m = (((s16)(data << 5)) >> 5);
+
+	/*
+	 * mantissa is 10 bit + sign, exponent adds up to 15 bit.
+	 * Add 6 bit to exponent for maximum accuracy (10 + 15 + 6 = 31).
+	 */
+	e += 6;
+	return (e < 0 ? m >> -e : m << e);
+}
+
+static int ltc_get_max(struct ltc2978_data *data, struct i2c_client *client,
+		       int page, int reg, u16 *pmax)
+{
+	int ret;
+
+	ret = ltc_read_word_data(client, page, 0xff, reg);
+	if (ret >= 0) {
+		if (lin11_to_val(ret) > lin11_to_val(*pmax))
+			*pmax = ret;
+		ret = *pmax;
+	}
+	return ret;
+}
+
+static int ltc_get_min(struct ltc2978_data *data, struct i2c_client *client,
+		       int page, int reg, u16 *pmin)
+{
+	int ret;
+
+	ret = ltc_read_word_data(client, page, 0xff, reg);
+	if (ret >= 0) {
+		if (lin11_to_val(ret) < lin11_to_val(*pmin))
+			*pmin = ret;
+		ret = *pmin;
+	}
+	return ret;
+}
+
+static int ltc2978_read_word_data_common(struct i2c_client *client, int page,
+					 int reg)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	struct ltc2978_data *data = to_ltc2978_data(info);
+	int ret;
+
+	switch (reg) {
+	case PMBUS_VIRT_READ_VIN_MAX:
+		ret = ltc_get_max(data, client, page, LTC2978_MFR_VIN_PEAK,
+				  &data->vin_max);
+		break;
+	case PMBUS_VIRT_READ_VOUT_MAX:
+		ret = ltc_read_word_data(client, page, 0xff,
+					 LTC2978_MFR_VOUT_PEAK);
+		if (ret >= 0) {
+			/*
+			 * VOUT is 16 bit unsigned with fixed exponent,
+			 * so we can compare it directly
+			 */
+			if (ret > data->vout_max[page])
+				data->vout_max[page] = ret;
+			ret = data->vout_max[page];
+		}
+		break;
+	case PMBUS_VIRT_READ_TEMP_MAX:
+		ret = ltc_get_max(data, client, page,
+				  LTC2978_MFR_TEMPERATURE_PEAK,
+				  &data->temp_max[page]);
+		break;
+	case PMBUS_VIRT_RESET_VOUT_HISTORY:
+	case PMBUS_VIRT_RESET_VIN_HISTORY:
+	case PMBUS_VIRT_RESET_TEMP_HISTORY:
+		ret = 0;
+		break;
+	default:
+		ret = ltc_wait_ready(client);
+		if (ret < 0)
+			return ret;
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
+static int ltc2978_read_word_data(struct i2c_client *client, int page,
+				  int phase, int reg)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	struct ltc2978_data *data = to_ltc2978_data(info);
+	int ret;
+
+	switch (reg) {
+	case PMBUS_VIRT_READ_VIN_MIN:
+		ret = ltc_get_min(data, client, page, LTC2978_MFR_VIN_MIN,
+				  &data->vin_min);
+		break;
+	case PMBUS_VIRT_READ_VOUT_MIN:
+		ret = ltc_read_word_data(client, page, phase,
+					 LTC2978_MFR_VOUT_MIN);
+		if (ret >= 0) {
+			/*
+			 * VOUT_MIN is known to not be supported on some lots
+			 * of LTC2978 revision 1, and will return the maximum
+			 * possible voltage if read. If VOUT_MAX is valid and
+			 * lower than the reading of VOUT_MIN, use it instead.
+			 */
+			if (data->vout_max[page] && ret > data->vout_max[page])
+				ret = data->vout_max[page];
+			if (ret < data->vout_min[page])
+				data->vout_min[page] = ret;
+			ret = data->vout_min[page];
+		}
+		break;
+	case PMBUS_VIRT_READ_TEMP_MIN:
+		ret = ltc_get_min(data, client, page,
+				  LTC2978_MFR_TEMPERATURE_MIN,
+				  &data->temp_min[page]);
+		break;
+	case PMBUS_VIRT_READ_IOUT_MAX:
+	case PMBUS_VIRT_RESET_IOUT_HISTORY:
+	case PMBUS_VIRT_READ_TEMP2_MAX:
+	case PMBUS_VIRT_RESET_TEMP2_HISTORY:
+		ret = -ENXIO;
+		break;
+	default:
+		ret = ltc2978_read_word_data_common(client, page, reg);
+		break;
+	}
+	return ret;
+}
+
+static int ltc2974_read_word_data(struct i2c_client *client, int page,
+				  int phase, int reg)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	struct ltc2978_data *data = to_ltc2978_data(info);
+	int ret;
+
+	switch (reg) {
+	case PMBUS_VIRT_READ_IOUT_MAX:
+		ret = ltc_get_max(data, client, page, LTC2974_MFR_IOUT_PEAK,
+				  &data->iout_max[page]);
+		break;
+	case PMBUS_VIRT_READ_IOUT_MIN:
+		ret = ltc_get_min(data, client, page, LTC2974_MFR_IOUT_MIN,
+				  &data->iout_min[page]);
+		break;
+	case PMBUS_VIRT_RESET_IOUT_HISTORY:
+		ret = 0;
+		break;
+	default:
+		ret = ltc2978_read_word_data(client, page, phase, reg);
+		break;
+	}
+	return ret;
+}
+
+static int ltc2975_read_word_data(struct i2c_client *client, int page,
+				  int phase, int reg)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	struct ltc2978_data *data = to_ltc2978_data(info);
+	int ret;
+
+	switch (reg) {
+	case PMBUS_VIRT_READ_IIN_MAX:
+		ret = ltc_get_max(data, client, page, LTC2975_MFR_IIN_PEAK,
+				  &data->iin_max);
+		break;
+	case PMBUS_VIRT_READ_IIN_MIN:
+		ret = ltc_get_min(data, client, page, LTC2975_MFR_IIN_MIN,
+				  &data->iin_min);
+		break;
+	case PMBUS_VIRT_READ_PIN_MAX:
+		ret = ltc_get_max(data, client, page, LTC2975_MFR_PIN_PEAK,
+				  &data->pin_max);
+		break;
+	case PMBUS_VIRT_READ_PIN_MIN:
+		ret = ltc_get_min(data, client, page, LTC2975_MFR_PIN_MIN,
+				  &data->pin_min);
+		break;
+	case PMBUS_VIRT_RESET_IIN_HISTORY:
+	case PMBUS_VIRT_RESET_PIN_HISTORY:
+		ret = 0;
+		break;
+	default:
+		ret = ltc2978_read_word_data(client, page, phase, reg);
+		break;
+	}
+	return ret;
+}
+
+static int ltc3880_read_word_data(struct i2c_client *client, int page,
+				  int phase, int reg)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	struct ltc2978_data *data = to_ltc2978_data(info);
+	int ret;
+
+	switch (reg) {
+	case PMBUS_VIRT_READ_IOUT_MAX:
+		ret = ltc_get_max(data, client, page, LTC3880_MFR_IOUT_PEAK,
+				  &data->iout_max[page]);
+		break;
+	case PMBUS_VIRT_READ_TEMP2_MAX:
+		ret = ltc_get_max(data, client, page,
+				  LTC3880_MFR_TEMPERATURE2_PEAK,
+				  &data->temp2_max);
+		break;
+	case PMBUS_VIRT_READ_VIN_MIN:
+	case PMBUS_VIRT_READ_VOUT_MIN:
+	case PMBUS_VIRT_READ_TEMP_MIN:
+		ret = -ENXIO;
+		break;
+	case PMBUS_VIRT_RESET_IOUT_HISTORY:
+	case PMBUS_VIRT_RESET_TEMP2_HISTORY:
+		ret = 0;
+		break;
+	default:
+		ret = ltc2978_read_word_data_common(client, page, reg);
+		break;
+	}
+	return ret;
+}
+
+static int ltc3883_read_word_data(struct i2c_client *client, int page,
+				  int phase, int reg)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	struct ltc2978_data *data = to_ltc2978_data(info);
+	int ret;
+
+	switch (reg) {
+	case PMBUS_VIRT_READ_IIN_MAX:
+		ret = ltc_get_max(data, client, page, LTC3883_MFR_IIN_PEAK,
+				  &data->iin_max);
+		break;
+	case PMBUS_VIRT_RESET_IIN_HISTORY:
+		ret = 0;
+		break;
+	default:
+		ret = ltc3880_read_word_data(client, page, phase, reg);
+		break;
+	}
+	return ret;
+}
+
+static int ltc2978_clear_peaks(struct ltc2978_data *data,
+			       struct i2c_client *client, int page)
+{
+	int ret;
+
+	if (has_clear_peaks(data))
+		ret = ltc_write_byte(client, 0, LTC3880_MFR_CLEAR_PEAKS);
+	else
+		ret = ltc_write_byte(client, page, PMBUS_CLEAR_FAULTS);
+
+	return ret;
+}
+
+static int ltc2978_write_word_data(struct i2c_client *client, int page,
+				    int reg, u16 word)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	struct ltc2978_data *data = to_ltc2978_data(info);
+	int ret;
+
+	switch (reg) {
+	case PMBUS_VIRT_RESET_IIN_HISTORY:
+		data->iin_max = 0x7c00;
+		data->iin_min = 0x7bff;
+		ret = ltc2978_clear_peaks(data, client, 0);
+		break;
+	case PMBUS_VIRT_RESET_PIN_HISTORY:
+		data->pin_max = 0x7c00;
+		data->pin_min = 0x7bff;
+		ret = ltc2978_clear_peaks(data, client, 0);
+		break;
+	case PMBUS_VIRT_RESET_IOUT_HISTORY:
+		data->iout_max[page] = 0x7c00;
+		data->iout_min[page] = 0xfbff;
+		ret = ltc2978_clear_peaks(data, client, page);
+		break;
+	case PMBUS_VIRT_RESET_TEMP2_HISTORY:
+		data->temp2_max = 0x7c00;
+		ret = ltc2978_clear_peaks(data, client, page);
+		break;
+	case PMBUS_VIRT_RESET_VOUT_HISTORY:
+		data->vout_min[page] = 0xffff;
+		data->vout_max[page] = 0;
+		ret = ltc2978_clear_peaks(data, client, page);
+		break;
+	case PMBUS_VIRT_RESET_VIN_HISTORY:
+		data->vin_min = 0x7bff;
+		data->vin_max = 0x7c00;
+		ret = ltc2978_clear_peaks(data, client, page);
+		break;
+	case PMBUS_VIRT_RESET_TEMP_HISTORY:
+		data->temp_min[page] = 0x7bff;
+		data->temp_max[page] = 0x7c00;
+		ret = ltc2978_clear_peaks(data, client, page);
+		break;
+	default:
+		ret = ltc_wait_ready(client);
+		if (ret < 0)
+			return ret;
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
+static const struct i2c_device_id ltc2978_id[] = {
+	{"ltc2972", ltc2972},
+	{"ltc2974", ltc2974},
+	{"ltc2975", ltc2975},
+	{"ltc2977", ltc2977},
+	{"ltc2978", ltc2978},
+	{"ltc2979", ltc2979},
+	{"ltc2980", ltc2980},
+	{"ltc3880", ltc3880},
+	{"ltc3882", ltc3882},
+	{"ltc3883", ltc3883},
+	{"ltc3884", ltc3884},
+	{"ltc3886", ltc3886},
+	{"ltc3887", ltc3887},
+	{"ltc3889", ltc3889},
+	{"ltc7880", ltc7880},
+	{"ltm2987", ltm2987},
+	{"ltm4664", ltm4664},
+	{"ltm4675", ltm4675},
+	{"ltm4676", ltm4676},
+	{"ltm4677", ltm4677},
+	{"ltm4678", ltm4678},
+	{"ltm4680", ltm4680},
+	{"ltm4686", ltm4686},
+	{"ltm4700", ltm4700},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, ltc2978_id);
+
+#if IS_ENABLED(CONFIG_SENSORS_LTC2978_REGULATOR)
+#define LTC2978_ADC_RES	0xFFFF
+#define LTC2978_N_ADC	122
+#define LTC2978_MAX_UV	(LTC2978_ADC_RES * LTC2978_N_ADC)
+#define LTC2978_UV_STEP	1000
+#define LTC2978_N_VOLTAGES	((LTC2978_MAX_UV / LTC2978_UV_STEP) + 1)
+
+static const struct regulator_desc ltc2978_reg_desc[] = {
+	PMBUS_REGULATOR_STEP("vout", 0, LTC2978_N_VOLTAGES, LTC2978_UV_STEP),
+	PMBUS_REGULATOR_STEP("vout", 1, LTC2978_N_VOLTAGES, LTC2978_UV_STEP),
+	PMBUS_REGULATOR_STEP("vout", 2, LTC2978_N_VOLTAGES, LTC2978_UV_STEP),
+	PMBUS_REGULATOR_STEP("vout", 3, LTC2978_N_VOLTAGES, LTC2978_UV_STEP),
+	PMBUS_REGULATOR_STEP("vout", 4, LTC2978_N_VOLTAGES, LTC2978_UV_STEP),
+	PMBUS_REGULATOR_STEP("vout", 5, LTC2978_N_VOLTAGES, LTC2978_UV_STEP),
+	PMBUS_REGULATOR_STEP("vout", 6, LTC2978_N_VOLTAGES, LTC2978_UV_STEP),
+	PMBUS_REGULATOR_STEP("vout", 7, LTC2978_N_VOLTAGES, LTC2978_UV_STEP),
+};
+
+static const struct regulator_desc ltc2978_reg_desc_default[] = {
+	PMBUS_REGULATOR("vout", 0),
+	PMBUS_REGULATOR("vout", 1),
+	PMBUS_REGULATOR("vout", 2),
+	PMBUS_REGULATOR("vout", 3),
+	PMBUS_REGULATOR("vout", 4),
+	PMBUS_REGULATOR("vout", 5),
+	PMBUS_REGULATOR("vout", 6),
+	PMBUS_REGULATOR("vout", 7),
+};
+#endif /* CONFIG_SENSORS_LTC2978_REGULATOR */
+
+static int ltc2978_get_id(struct i2c_client *client)
+{
+	int chip_id;
+
+	chip_id = i2c_smbus_read_word_data(client, LTC2978_MFR_SPECIAL_ID);
+	if (chip_id < 0) {
+		const struct i2c_device_id *id;
+		u8 buf[I2C_SMBUS_BLOCK_MAX];
+		int ret;
+
+		if (!i2c_check_functionality(client->adapter,
+					     I2C_FUNC_SMBUS_READ_BLOCK_DATA))
+			return -ENODEV;
+
+		ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, buf);
+		if (ret < 0)
+			return ret;
+		if (ret < 3 || strncmp(buf, "LTC", 3))
+			return -ENODEV;
+
+		ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, buf);
+		if (ret < 0)
+			return ret;
+		for (id = &ltc2978_id[0]; strlen(id->name); id++) {
+			if (!strncasecmp(id->name, buf, strlen(id->name)))
+				return (int)id->driver_data;
+		}
+		return -ENODEV;
+	}
+
+	chip_id &= LTC2978_ID_MASK;
+
+	if (chip_id == LTC2972_ID)
+		return ltc2972;
+	else if (chip_id == LTC2974_ID)
+		return ltc2974;
+	else if (chip_id == LTC2975_ID)
+		return ltc2975;
+	else if (chip_id == LTC2977_ID)
+		return ltc2977;
+	else if (chip_id == LTC2978_ID_REV1 || chip_id == LTC2978_ID_REV2)
+		return ltc2978;
+	else if (chip_id == LTC2979_ID_A || chip_id == LTC2979_ID_B)
+		return ltc2979;
+	else if (chip_id == LTC2980_ID_A || chip_id == LTC2980_ID_B)
+		return ltc2980;
+	else if (chip_id == LTC3880_ID)
+		return ltc3880;
+	else if (chip_id == LTC3882_ID || chip_id == LTC3882_ID_D1)
+		return ltc3882;
+	else if (chip_id == LTC3883_ID)
+		return ltc3883;
+	else if (chip_id == LTC3884_ID)
+		return ltc3884;
+	else if (chip_id == LTC3886_ID)
+		return ltc3886;
+	else if (chip_id == LTC3887_ID)
+		return ltc3887;
+	else if (chip_id == LTC3889_ID)
+		return ltc3889;
+	else if (chip_id == LTC7880_ID)
+		return ltc7880;
+	else if (chip_id == LTM2987_ID_A || chip_id == LTM2987_ID_B)
+		return ltm2987;
+	else if (chip_id == LTM4664_ID)
+		return ltm4664;
+	else if (chip_id == LTM4675_ID)
+		return ltm4675;
+	else if (chip_id == LTM4676_ID_REV1 || chip_id == LTM4676_ID_REV2 ||
+		 chip_id == LTM4676A_ID)
+		return ltm4676;
+	else if (chip_id == LTM4677_ID_REV1 || chip_id == LTM4677_ID_REV2)
+		return ltm4677;
+	else if (chip_id == LTM4678_ID_REV1 || chip_id == LTM4678_ID_REV2)
+		return ltm4678;
+	else if (chip_id == LTM4680_ID)
+		return ltm4680;
+	else if (chip_id == LTM4686_ID)
+		return ltm4686;
+	else if (chip_id == LTM4700_ID)
+		return ltm4700;
+
+	dev_err(&client->dev, "Unsupported chip ID 0x%x\n", chip_id);
+	return -ENODEV;
+}
+
+static int ltc2978_probe(struct i2c_client *client)
+{
+	int i, chip_id;
+	struct ltc2978_data *data;
+	struct pmbus_driver_info *info;
+	const struct i2c_device_id *id;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_READ_WORD_DATA))
+		return -ENODEV;
+
+	data = devm_kzalloc(&client->dev, sizeof(struct ltc2978_data),
+			    GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	chip_id = ltc2978_get_id(client);
+	if (chip_id < 0)
+		return chip_id;
+
+	data->id = chip_id;
+	id = i2c_match_id(ltc2978_id, client);
+	if (data->id != id->driver_data)
+		dev_warn(&client->dev,
+			 "Device mismatch: Configured %s (%d), detected %d\n",
+			 id->name,
+			 (int) id->driver_data,
+			 chip_id);
+
+	info = &data->info;
+	info->write_word_data = ltc2978_write_word_data;
+	info->write_byte = ltc_write_byte;
+	info->write_byte_data = ltc_write_byte_data;
+	info->read_word_data = ltc_read_word_data;
+	info->read_byte_data = ltc_read_byte_data;
+
+	data->vin_min = 0x7bff;
+	data->vin_max = 0x7c00;
+	for (i = 0; i < ARRAY_SIZE(data->vout_min); i++)
+		data->vout_min[i] = 0xffff;
+	for (i = 0; i < ARRAY_SIZE(data->iout_min); i++)
+		data->iout_min[i] = 0xfbff;
+	for (i = 0; i < ARRAY_SIZE(data->iout_max); i++)
+		data->iout_max[i] = 0x7c00;
+	for (i = 0; i < ARRAY_SIZE(data->temp_min); i++)
+		data->temp_min[i] = 0x7bff;
+	for (i = 0; i < ARRAY_SIZE(data->temp_max); i++)
+		data->temp_max[i] = 0x7c00;
+	data->temp2_max = 0x7c00;
+
+	switch (data->id) {
+	case ltc2972:
+		info->read_word_data = ltc2975_read_word_data;
+		info->pages = LTC2972_NUM_PAGES;
+		info->func[0] = PMBUS_HAVE_IIN | PMBUS_HAVE_PIN
+		  | PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
+		  | PMBUS_HAVE_TEMP2;
+		for (i = 0; i < info->pages; i++) {
+			info->func[i] |= PMBUS_HAVE_VOUT
+			  | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_POUT
+			  | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP
+			  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT;
+		}
+		break;
+	case ltc2974:
+		info->read_word_data = ltc2974_read_word_data;
+		info->pages = LTC2974_NUM_PAGES;
+		info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
+		  | PMBUS_HAVE_TEMP2;
+		for (i = 0; i < info->pages; i++) {
+			info->func[i] |= PMBUS_HAVE_VOUT
+			  | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_POUT
+			  | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP
+			  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT;
+		}
+		break;
+	case ltc2975:
+		info->read_word_data = ltc2975_read_word_data;
+		info->pages = LTC2974_NUM_PAGES;
+		info->func[0] = PMBUS_HAVE_IIN | PMBUS_HAVE_PIN
+		  | PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
+		  | PMBUS_HAVE_TEMP2;
+		for (i = 0; i < info->pages; i++) {
+			info->func[i] |= PMBUS_HAVE_VOUT
+			  | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_POUT
+			  | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP
+			  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT;
+		}
+		break;
+
+	case ltc2977:
+	case ltc2978:
+	case ltc2979:
+	case ltc2980:
+	case ltm2987:
+		info->read_word_data = ltc2978_read_word_data;
+		info->pages = LTC2978_NUM_PAGES;
+		info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
+		  | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
+		for (i = 1; i < LTC2978_NUM_PAGES; i++) {
+			info->func[i] = PMBUS_HAVE_VOUT
+			  | PMBUS_HAVE_STATUS_VOUT;
+		}
+		break;
+	case ltc3880:
+	case ltc3887:
+	case ltm4675:
+	case ltm4676:
+	case ltm4677:
+	case ltm4686:
+		data->features |= FEAT_CLEAR_PEAKS | FEAT_NEEDS_POLLING;
+		info->read_word_data = ltc3880_read_word_data;
+		info->pages = LTC3880_NUM_PAGES;
+		info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN
+		  | PMBUS_HAVE_STATUS_INPUT
+		  | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
+		  | PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
+		  | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP;
+		info->func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
+		  | PMBUS_HAVE_POUT
+		  | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
+		break;
+	case ltc3882:
+		data->features |= FEAT_CLEAR_PEAKS | FEAT_NEEDS_POLLING;
+		info->read_word_data = ltc3880_read_word_data;
+		info->pages = LTC3880_NUM_PAGES;
+		info->func[0] = PMBUS_HAVE_VIN
+		  | PMBUS_HAVE_STATUS_INPUT
+		  | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
+		  | PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
+		  | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP;
+		info->func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
+		  | PMBUS_HAVE_POUT
+		  | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
+		break;
+	case ltc3883:
+		data->features |= FEAT_CLEAR_PEAKS | FEAT_NEEDS_POLLING;
+		info->read_word_data = ltc3883_read_word_data;
+		info->pages = LTC3883_NUM_PAGES;
+		info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN
+		  | PMBUS_HAVE_STATUS_INPUT
+		  | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
+		  | PMBUS_HAVE_PIN | PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
+		  | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP;
+		break;
+	case ltc3884:
+	case ltc3886:
+	case ltc3889:
+	case ltc7880:
+	case ltm4664:
+	case ltm4678:
+	case ltm4680:
+	case ltm4700:
+		data->features |= FEAT_CLEAR_PEAKS | FEAT_NEEDS_POLLING;
+		info->read_word_data = ltc3883_read_word_data;
+		info->pages = LTC3880_NUM_PAGES;
+		info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN
+		  | PMBUS_HAVE_STATUS_INPUT
+		  | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
+		  | PMBUS_HAVE_PIN | PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
+		  | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP;
+		info->func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
+		  | PMBUS_HAVE_POUT
+		  | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
+		break;
+	default:
+		return -ENODEV;
+	}
+
+#if IS_ENABLED(CONFIG_SENSORS_LTC2978_REGULATOR)
+	info->num_regulators = info->pages;
+	switch (data->id) {
+	case ltc2972:
+	case ltc2974:
+	case ltc2975:
+	case ltc2977:
+	case ltc2978:
+	case ltc2979:
+	case ltc2980:
+	case ltm2987:
+		info->reg_desc = ltc2978_reg_desc;
+		if (info->num_regulators > ARRAY_SIZE(ltc2978_reg_desc)) {
+			dev_warn(&client->dev, "num_regulators too large!");
+			info->num_regulators = ARRAY_SIZE(ltc2978_reg_desc);
+		}
+		break;
+	default:
+		info->reg_desc = ltc2978_reg_desc_default;
+		if (info->num_regulators > ARRAY_SIZE(ltc2978_reg_desc_default)) {
+			dev_warn(&client->dev, "num_regulators too large!");
+			info->num_regulators =
+			    ARRAY_SIZE(ltc2978_reg_desc_default);
+		}
+		break;
+	}
+#endif
+
+	return pmbus_do_probe(client, info);
+}
+
+
+#ifdef CONFIG_OF
+static const struct of_device_id ltc2978_of_match[] = {
+	{ .compatible = "lltc,ltc2972" },
+	{ .compatible = "lltc,ltc2974" },
+	{ .compatible = "lltc,ltc2975" },
+	{ .compatible = "lltc,ltc2977" },
+	{ .compatible = "lltc,ltc2978" },
+	{ .compatible = "lltc,ltc2979" },
+	{ .compatible = "lltc,ltc2980" },
+	{ .compatible = "lltc,ltc3880" },
+	{ .compatible = "lltc,ltc3882" },
+	{ .compatible = "lltc,ltc3883" },
+	{ .compatible = "lltc,ltc3884" },
+	{ .compatible = "lltc,ltc3886" },
+	{ .compatible = "lltc,ltc3887" },
+	{ .compatible = "lltc,ltc3889" },
+	{ .compatible = "lltc,ltc7880" },
+	{ .compatible = "lltc,ltm2987" },
+	{ .compatible = "lltc,ltm4664" },
+	{ .compatible = "lltc,ltm4675" },
+	{ .compatible = "lltc,ltm4676" },
+	{ .compatible = "lltc,ltm4677" },
+	{ .compatible = "lltc,ltm4678" },
+	{ .compatible = "lltc,ltm4680" },
+	{ .compatible = "lltc,ltm4686" },
+	{ .compatible = "lltc,ltm4700" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ltc2978_of_match);
+#endif
+
+static struct i2c_driver ltc2978_driver = {
+	.driver = {
+		   .name = "ltc2978",
+		   .of_match_table = of_match_ptr(ltc2978_of_match),
+		   },
+	.probe_new = ltc2978_probe,
+	.id_table = ltc2978_id,
+};
+
+module_i2c_driver(ltc2978_driver);
+
+MODULE_AUTHOR("Guenter Roeck");
+MODULE_DESCRIPTION("PMBus driver for LTC2978 and compatible chips");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/ltc3815.c b/drivers/hwmon/pmbus/ltc3815.c
new file mode 100644
index 000000000..8e13a7ddc
--- /dev/null
+++ b/drivers/hwmon/pmbus/ltc3815.c
@@ -0,0 +1,211 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Hardware monitoring driver for LTC3815
+ *
+ * Copyright (c) 2015 Linear Technology
+ * Copyright (c) 2015 Guenter Roeck
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include "pmbus.h"
+
+#define LTC3815_MFR_IOUT_PEAK	0xd7
+#define LTC3815_MFR_VOUT_PEAK	0xdd
+#define LTC3815_MFR_VIN_PEAK	0xde
+#define LTC3815_MFR_TEMP_PEAK	0xdf
+#define LTC3815_MFR_IIN_PEAK	0xe1
+#define LTC3815_MFR_SPECIAL_ID	0xe7
+
+#define LTC3815_ID		0x8000
+#define LTC3815_ID_MASK		0xff00
+
+static int ltc3815_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+	int ret;
+
+	switch (reg) {
+	case PMBUS_VOUT_MODE:
+		/*
+		 * The chip returns 0x3e, suggesting VID mode with manufacturer
+		 * specific VID codes. Since the output voltage is reported
+		 * with a LSB of 0.5mV, override and report direct mode with
+		 * appropriate coefficients.
+		 */
+		ret = 0x40;
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
+static int ltc3815_write_byte(struct i2c_client *client, int page, u8 reg)
+{
+	int ret;
+
+	switch (reg) {
+	case PMBUS_CLEAR_FAULTS:
+		/*
+		 * LTC3815 does not support the CLEAR_FAULTS command.
+		 * Emulate it by clearing the status register.
+		 */
+		ret = pmbus_read_word_data(client, 0, 0xff, PMBUS_STATUS_WORD);
+		if (ret > 0) {
+			pmbus_write_word_data(client, 0, PMBUS_STATUS_WORD,
+					      ret);
+			ret = 0;
+		}
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
+static int ltc3815_read_word_data(struct i2c_client *client, int page,
+				  int phase, int reg)
+{
+	int ret;
+
+	switch (reg) {
+	case PMBUS_VIRT_READ_VIN_MAX:
+		ret = pmbus_read_word_data(client, page, phase,
+					   LTC3815_MFR_VIN_PEAK);
+		break;
+	case PMBUS_VIRT_READ_VOUT_MAX:
+		ret = pmbus_read_word_data(client, page, phase,
+					   LTC3815_MFR_VOUT_PEAK);
+		break;
+	case PMBUS_VIRT_READ_TEMP_MAX:
+		ret = pmbus_read_word_data(client, page, phase,
+					   LTC3815_MFR_TEMP_PEAK);
+		break;
+	case PMBUS_VIRT_READ_IOUT_MAX:
+		ret = pmbus_read_word_data(client, page, phase,
+					   LTC3815_MFR_IOUT_PEAK);
+		break;
+	case PMBUS_VIRT_READ_IIN_MAX:
+		ret = pmbus_read_word_data(client, page, phase,
+					   LTC3815_MFR_IIN_PEAK);
+		break;
+	case PMBUS_VIRT_RESET_VOUT_HISTORY:
+	case PMBUS_VIRT_RESET_VIN_HISTORY:
+	case PMBUS_VIRT_RESET_TEMP_HISTORY:
+	case PMBUS_VIRT_RESET_IOUT_HISTORY:
+	case PMBUS_VIRT_RESET_IIN_HISTORY:
+		ret = 0;
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
+static int ltc3815_write_word_data(struct i2c_client *client, int page,
+				   int reg, u16 word)
+{
+	int ret;
+
+	switch (reg) {
+	case PMBUS_VIRT_RESET_IIN_HISTORY:
+		ret = pmbus_write_word_data(client, page,
+					    LTC3815_MFR_IIN_PEAK, 0);
+		break;
+	case PMBUS_VIRT_RESET_IOUT_HISTORY:
+		ret = pmbus_write_word_data(client, page,
+					    LTC3815_MFR_IOUT_PEAK, 0);
+		break;
+	case PMBUS_VIRT_RESET_VOUT_HISTORY:
+		ret = pmbus_write_word_data(client, page,
+					    LTC3815_MFR_VOUT_PEAK, 0);
+		break;
+	case PMBUS_VIRT_RESET_VIN_HISTORY:
+		ret = pmbus_write_word_data(client, page,
+					    LTC3815_MFR_VIN_PEAK, 0);
+		break;
+	case PMBUS_VIRT_RESET_TEMP_HISTORY:
+		ret = pmbus_write_word_data(client, page,
+					    LTC3815_MFR_TEMP_PEAK, 0);
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
+static const struct i2c_device_id ltc3815_id[] = {
+	{"ltc3815", 0},
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ltc3815_id);
+
+static struct pmbus_driver_info ltc3815_info = {
+	.pages = 1,
+	.format[PSC_VOLTAGE_IN] = direct,
+	.format[PSC_VOLTAGE_OUT] = direct,
+	.format[PSC_CURRENT_IN] = direct,
+	.format[PSC_CURRENT_OUT] = direct,
+	.format[PSC_TEMPERATURE] = direct,
+	.m[PSC_VOLTAGE_IN] = 250,
+	.b[PSC_VOLTAGE_IN] = 0,
+	.R[PSC_VOLTAGE_IN] = 0,
+	.m[PSC_VOLTAGE_OUT] = 2,
+	.b[PSC_VOLTAGE_OUT] = 0,
+	.R[PSC_VOLTAGE_OUT] = 3,
+	.m[PSC_CURRENT_IN] = 1,
+	.b[PSC_CURRENT_IN] = 0,
+	.R[PSC_CURRENT_IN] = 2,
+	.m[PSC_CURRENT_OUT] = 1,
+	.b[PSC_CURRENT_OUT] = 0,
+	.R[PSC_CURRENT_OUT] = 2,
+	.m[PSC_TEMPERATURE] = 1,
+	.b[PSC_TEMPERATURE] = 0,
+	.R[PSC_TEMPERATURE] = 0,
+	.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN | PMBUS_HAVE_VOUT |
+		PMBUS_HAVE_IOUT | PMBUS_HAVE_TEMP,
+	.read_byte_data = ltc3815_read_byte_data,
+	.read_word_data = ltc3815_read_word_data,
+	.write_byte = ltc3815_write_byte,
+	.write_word_data = ltc3815_write_word_data,
+};
+
+static int ltc3815_probe(struct i2c_client *client)
+{
+	int chip_id;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_READ_WORD_DATA))
+		return -ENODEV;
+
+	chip_id = i2c_smbus_read_word_data(client, LTC3815_MFR_SPECIAL_ID);
+	if (chip_id < 0)
+		return chip_id;
+	if ((chip_id & LTC3815_ID_MASK) != LTC3815_ID)
+		return -ENODEV;
+
+	return pmbus_do_probe(client, &ltc3815_info);
+}
+
+static struct i2c_driver ltc3815_driver = {
+	.driver = {
+		   .name = "ltc3815",
+		   },
+	.probe_new = ltc3815_probe,
+	.id_table = ltc3815_id,
+};
+
+module_i2c_driver(ltc3815_driver);
+
+MODULE_AUTHOR("Guenter Roeck");
+MODULE_DESCRIPTION("PMBus driver for LTC3815");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/max15301.c b/drivers/hwmon/pmbus/max15301.c
new file mode 100644
index 000000000..0b6f88428
--- /dev/null
+++ b/drivers/hwmon/pmbus/max15301.c
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Hardware monitoring driver for Maxim MAX15301
+ *
+ * Copyright (c) 2021 Flextronics International Sweden AB
+ *
+ * Even though the specification does not specifically mention it,
+ * extensive empirical testing has revealed that auto-detection of
+ * limit-registers will fail in a random fashion unless the delay
+ * parameter is set to above about 80us. The default delay is set
+ * to 100us to include some safety margin.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/ktime.h>
+#include <linux/delay.h>
+#include <linux/pmbus.h>
+#include "pmbus.h"
+
+static const struct i2c_device_id max15301_id[] = {
+	{"bmr461", 0},
+	{"max15301", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, max15301_id);
+
+struct max15301_data {
+	int id;
+	ktime_t access;		/* Chip access time */
+	int delay;		/* Delay between chip accesses in us */
+	struct pmbus_driver_info info;
+};
+
+#define to_max15301_data(x)  container_of(x, struct max15301_data, info)
+
+#define MAX15301_WAIT_TIME		100	/* us	*/
+
+static ushort delay = MAX15301_WAIT_TIME;
+module_param(delay, ushort, 0644);
+MODULE_PARM_DESC(delay, "Delay between chip accesses in us");
+
+static struct max15301_data max15301_data = {
+	.info = {
+		.pages = 1,
+		.func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+			| PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
+			| PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2
+			| PMBUS_HAVE_STATUS_TEMP
+			| PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+	}
+};
+
+/* This chip needs a delay between accesses */
+static inline void max15301_wait(const struct max15301_data *data)
+{
+	if (data->delay) {
+		s64 delta = ktime_us_delta(ktime_get(), data->access);
+
+		if (delta < data->delay)
+			udelay(data->delay - delta);
+	}
+}
+
+static int max15301_read_word_data(struct i2c_client *client, int page,
+				   int phase, int reg)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	struct max15301_data *data = to_max15301_data(info);
+	int ret;
+
+	if (page > 0)
+		return -ENXIO;
+
+	if (reg >= PMBUS_VIRT_BASE)
+		return -ENXIO;
+
+	max15301_wait(data);
+	ret = pmbus_read_word_data(client, page, phase, reg);
+	data->access = ktime_get();
+
+	return ret;
+}
+
+static int max15301_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	struct max15301_data *data = to_max15301_data(info);
+	int ret;
+
+	if (page > 0)
+		return -ENXIO;
+
+	max15301_wait(data);
+	ret = pmbus_read_byte_data(client, page, reg);
+	data->access = ktime_get();
+
+	return ret;
+}
+
+static int max15301_write_word_data(struct i2c_client *client, int page, int reg,
+				    u16 word)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	struct max15301_data *data = to_max15301_data(info);
+	int ret;
+
+	if (page > 0)
+		return -ENXIO;
+
+	if (reg >= PMBUS_VIRT_BASE)
+		return -ENXIO;
+
+	max15301_wait(data);
+	ret = pmbus_write_word_data(client, page, reg, word);
+	data->access = ktime_get();
+
+	return ret;
+}
+
+static int max15301_write_byte(struct i2c_client *client, int page, u8 value)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	struct max15301_data *data = to_max15301_data(info);
+	int ret;
+
+	if (page > 0)
+		return -ENXIO;
+
+	max15301_wait(data);
+	ret = pmbus_write_byte(client, page, value);
+	data->access = ktime_get();
+
+	return ret;
+}
+
+static int max15301_probe(struct i2c_client *client)
+{
+	int status;
+	u8 device_id[I2C_SMBUS_BLOCK_MAX + 1];
+	const struct i2c_device_id *mid;
+	struct pmbus_driver_info *info = &max15301_data.info;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_READ_BYTE_DATA
+				     | I2C_FUNC_SMBUS_BLOCK_DATA))
+		return -ENODEV;
+
+	status = i2c_smbus_read_block_data(client, PMBUS_IC_DEVICE_ID, device_id);
+	if (status < 0) {
+		dev_err(&client->dev, "Failed to read Device Id\n");
+		return status;
+	}
+	for (mid = max15301_id; mid->name[0]; mid++) {
+		if (!strncasecmp(mid->name, device_id, strlen(mid->name)))
+			break;
+	}
+	if (!mid->name[0]) {
+		dev_err(&client->dev, "Unsupported device\n");
+		return -ENODEV;
+	}
+
+	max15301_data.delay = delay;
+
+	info->read_byte_data = max15301_read_byte_data;
+	info->read_word_data = max15301_read_word_data;
+	info->write_byte = max15301_write_byte;
+	info->write_word_data = max15301_write_word_data;
+
+	return pmbus_do_probe(client, info);
+}
+
+static struct i2c_driver max15301_driver = {
+	.driver = {
+		   .name = "max15301",
+		   },
+	.probe_new = max15301_probe,
+	.id_table = max15301_id,
+};
+
+module_i2c_driver(max15301_driver);
+
+MODULE_AUTHOR("Erik Rosen <erik.rosen@metormote.com>");
+MODULE_DESCRIPTION("PMBus driver for Maxim MAX15301");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/max16064.c b/drivers/hwmon/pmbus/max16064.c
new file mode 100644
index 000000000..94f869039
--- /dev/null
+++ b/drivers/hwmon/pmbus/max16064.c
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Hardware monitoring driver for Maxim MAX16064
+ *
+ * Copyright (c) 2011 Ericsson AB.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include "pmbus.h"
+
+#define MAX16064_MFR_VOUT_PEAK		0xd4
+#define MAX16064_MFR_TEMPERATURE_PEAK	0xd6
+
+static int max16064_read_word_data(struct i2c_client *client, int page,
+				   int phase, int reg)
+{
+	int ret;
+
+	switch (reg) {
+	case PMBUS_VIRT_READ_VOUT_MAX:
+		ret = pmbus_read_word_data(client, page, phase,
+					   MAX16064_MFR_VOUT_PEAK);
+		break;
+	case PMBUS_VIRT_READ_TEMP_MAX:
+		ret = pmbus_read_word_data(client, page, phase,
+					   MAX16064_MFR_TEMPERATURE_PEAK);
+		break;
+	case PMBUS_VIRT_RESET_VOUT_HISTORY:
+	case PMBUS_VIRT_RESET_TEMP_HISTORY:
+		ret = 0;
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
+static int max16064_write_word_data(struct i2c_client *client, int page,
+				    int reg, u16 word)
+{
+	int ret;
+
+	switch (reg) {
+	case PMBUS_VIRT_RESET_VOUT_HISTORY:
+		ret = pmbus_write_word_data(client, page,
+					    MAX16064_MFR_VOUT_PEAK, 0);
+		break;
+	case PMBUS_VIRT_RESET_TEMP_HISTORY:
+		ret = pmbus_write_word_data(client, page,
+					    MAX16064_MFR_TEMPERATURE_PEAK,
+					    0xffff);
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
+static struct pmbus_driver_info max16064_info = {
+	.pages = 4,
+	.format[PSC_VOLTAGE_IN] = direct,
+	.format[PSC_VOLTAGE_OUT] = direct,
+	.format[PSC_TEMPERATURE] = direct,
+	.m[PSC_VOLTAGE_IN] = 19995,
+	.b[PSC_VOLTAGE_IN] = 0,
+	.R[PSC_VOLTAGE_IN] = -1,
+	.m[PSC_VOLTAGE_OUT] = 19995,
+	.b[PSC_VOLTAGE_OUT] = 0,
+	.R[PSC_VOLTAGE_OUT] = -1,
+	.m[PSC_TEMPERATURE] = -7612,
+	.b[PSC_TEMPERATURE] = 335,
+	.R[PSC_TEMPERATURE] = -3,
+	.func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_TEMP
+		| PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_TEMP,
+	.func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+	.func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+	.func[3] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+	.read_word_data = max16064_read_word_data,
+	.write_word_data = max16064_write_word_data,
+};
+
+static int max16064_probe(struct i2c_client *client)
+{
+	return pmbus_do_probe(client, &max16064_info);
+}
+
+static const struct i2c_device_id max16064_id[] = {
+	{"max16064", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, max16064_id);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver max16064_driver = {
+	.driver = {
+		   .name = "max16064",
+		   },
+	.probe_new = max16064_probe,
+	.id_table = max16064_id,
+};
+
+module_i2c_driver(max16064_driver);
+
+MODULE_AUTHOR("Guenter Roeck");
+MODULE_DESCRIPTION("PMBus driver for Maxim MAX16064");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/max16601.c b/drivers/hwmon/pmbus/max16601.c
new file mode 100644
index 000000000..b628405e6
--- /dev/null
+++ b/drivers/hwmon/pmbus/max16601.c
@@ -0,0 +1,365 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Hardware monitoring driver for Maxim MAX16508, MAX16601 and MAX16602.
+ *
+ * Implementation notes:
+ *
+ * This chip series supports two rails, VCORE and VSA. Telemetry information
+ * for the two rails is reported in two subsequent I2C addresses. The driver
+ * instantiates a dummy I2C client at the second I2C address to report
+ * information for the VSA rail in a single instance of the driver.
+ * Telemetry for the VSA rail is reported to the PMBus core in PMBus page 2.
+ *
+ * The chip reports input current using two separate methods. The input current
+ * reported with the standard READ_IIN command is derived from the output
+ * current. The first method is reported to the PMBus core with PMBus page 0,
+ * the second method is reported with PMBus page 1.
+ *
+ * The chip supports reading per-phase temperatures and per-phase input/output
+ * currents for VCORE. Telemetry is reported in vendor specific registers.
+ * The driver translates the vendor specific register values to PMBus standard
+ * register values and reports per-phase information in PMBus page 0.
+ *
+ * Copyright 2019, 2020 Google LLC.
+ */
+
+#include <linux/bits.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "pmbus.h"
+
+enum chips { max16508, max16601, max16602 };
+
+#define REG_DEFAULT_NUM_POP	0xc4
+#define REG_SETPT_DVID		0xd1
+#define  DAC_10MV_MODE		BIT(4)
+#define REG_IOUT_AVG_PK		0xee
+#define REG_IIN_SENSOR		0xf1
+#define REG_TOTAL_INPUT_POWER	0xf2
+#define REG_PHASE_ID		0xf3
+#define  CORE_RAIL_INDICATOR	BIT(7)
+#define REG_PHASE_REPORTING	0xf4
+
+#define MAX16601_NUM_PHASES	8
+
+struct max16601_data {
+	enum chips id;
+	struct pmbus_driver_info info;
+	struct i2c_client *vsa;
+	int iout_avg_pkg;
+};
+
+#define to_max16601_data(x) container_of(x, struct max16601_data, info)
+
+static int max16601_read_byte(struct i2c_client *client, int page, int reg)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	struct max16601_data *data = to_max16601_data(info);
+
+	if (page > 0) {
+		if (page == 2)	/* VSA */
+			return i2c_smbus_read_byte_data(data->vsa, reg);
+		return -EOPNOTSUPP;
+	}
+	return -ENODATA;
+}
+
+static int max16601_read_word(struct i2c_client *client, int page, int phase,
+			      int reg)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	struct max16601_data *data = to_max16601_data(info);
+	u8 buf[I2C_SMBUS_BLOCK_MAX + 1];
+	int ret;
+
+	switch (page) {
+	case 0:		/* VCORE */
+		if (phase == 0xff)
+			return -ENODATA;
+		switch (reg) {
+		case PMBUS_READ_IIN:
+		case PMBUS_READ_IOUT:
+		case PMBUS_READ_TEMPERATURE_1:
+			ret = i2c_smbus_write_byte_data(client, REG_PHASE_ID,
+							phase);
+			if (ret)
+				return ret;
+			ret = i2c_smbus_read_block_data(client,
+							REG_PHASE_REPORTING,
+							buf);
+			if (ret < 0)
+				return ret;
+			if (ret < 6)
+				return -EIO;
+			switch (reg) {
+			case PMBUS_READ_TEMPERATURE_1:
+				return buf[1] << 8 | buf[0];
+			case PMBUS_READ_IOUT:
+				return buf[3] << 8 | buf[2];
+			case PMBUS_READ_IIN:
+				return buf[5] << 8 | buf[4];
+			default:
+				break;
+			}
+		}
+		return -EOPNOTSUPP;
+	case 1:		/* VCORE, read IIN/PIN from sensor element */
+		switch (reg) {
+		case PMBUS_READ_IIN:
+			return i2c_smbus_read_word_data(client, REG_IIN_SENSOR);
+		case PMBUS_READ_PIN:
+			return i2c_smbus_read_word_data(client,
+							REG_TOTAL_INPUT_POWER);
+		default:
+			break;
+		}
+		return -EOPNOTSUPP;
+	case 2:		/* VSA */
+		switch (reg) {
+		case PMBUS_VIRT_READ_IOUT_MAX:
+			ret = i2c_smbus_read_word_data(data->vsa,
+						       REG_IOUT_AVG_PK);
+			if (ret < 0)
+				return ret;
+			if (sign_extend32(ret, 10) >
+			    sign_extend32(data->iout_avg_pkg, 10))
+				data->iout_avg_pkg = ret;
+			return data->iout_avg_pkg;
+		case PMBUS_VIRT_RESET_IOUT_HISTORY:
+			return 0;
+		case PMBUS_IOUT_OC_FAULT_LIMIT:
+		case PMBUS_IOUT_OC_WARN_LIMIT:
+		case PMBUS_OT_FAULT_LIMIT:
+		case PMBUS_OT_WARN_LIMIT:
+		case PMBUS_READ_IIN:
+		case PMBUS_READ_IOUT:
+		case PMBUS_READ_TEMPERATURE_1:
+		case PMBUS_STATUS_WORD:
+			return i2c_smbus_read_word_data(data->vsa, reg);
+		default:
+			return -EOPNOTSUPP;
+		}
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int max16601_write_byte(struct i2c_client *client, int page, u8 reg)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	struct max16601_data *data = to_max16601_data(info);
+
+	if (page == 2) {
+		if (reg == PMBUS_CLEAR_FAULTS)
+			return i2c_smbus_write_byte(data->vsa, reg);
+		return -EOPNOTSUPP;
+	}
+	return -ENODATA;
+}
+
+static int max16601_write_word(struct i2c_client *client, int page, int reg,
+			       u16 value)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	struct max16601_data *data = to_max16601_data(info);
+
+	switch (page) {
+	case 0:		/* VCORE */
+		return -ENODATA;
+	case 1:		/* VCORE IIN/PIN from sensor element */
+	default:
+		return -EOPNOTSUPP;
+	case 2:		/* VSA */
+		switch (reg) {
+		case PMBUS_VIRT_RESET_IOUT_HISTORY:
+			data->iout_avg_pkg = 0xfc00;
+			return 0;
+		case PMBUS_IOUT_OC_FAULT_LIMIT:
+		case PMBUS_IOUT_OC_WARN_LIMIT:
+		case PMBUS_OT_FAULT_LIMIT:
+		case PMBUS_OT_WARN_LIMIT:
+			return i2c_smbus_write_word_data(data->vsa, reg, value);
+		default:
+			return -EOPNOTSUPP;
+		}
+	}
+}
+
+static int max16601_identify(struct i2c_client *client,
+			     struct pmbus_driver_info *info)
+{
+	struct max16601_data *data = to_max16601_data(info);
+	int reg;
+
+	reg = i2c_smbus_read_byte_data(client, REG_SETPT_DVID);
+	if (reg < 0)
+		return reg;
+	if (reg & DAC_10MV_MODE)
+		info->vrm_version[0] = vr13;
+	else
+		info->vrm_version[0] = vr12;
+
+	if (data->id != max16601 && data->id != max16602)
+		return 0;
+
+	reg = i2c_smbus_read_byte_data(client, REG_DEFAULT_NUM_POP);
+	if (reg < 0)
+		return reg;
+
+	/*
+	 * If REG_DEFAULT_NUM_POP returns 0, we don't know how many phases
+	 * are populated. Stick with the default in that case.
+	 */
+	reg &= 0x0f;
+	if (reg && reg <= MAX16601_NUM_PHASES)
+		info->phases[0] = reg;
+
+	return 0;
+}
+
+static struct pmbus_driver_info max16601_info = {
+	.pages = 3,
+	.format[PSC_VOLTAGE_IN] = linear,
+	.format[PSC_VOLTAGE_OUT] = vid,
+	.format[PSC_CURRENT_IN] = linear,
+	.format[PSC_CURRENT_OUT] = linear,
+	.format[PSC_TEMPERATURE] = linear,
+	.format[PSC_POWER] = linear,
+	.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN | PMBUS_HAVE_PIN |
+		PMBUS_HAVE_STATUS_INPUT |
+		PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+		PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+		PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP |
+		PMBUS_HAVE_POUT | PMBUS_PAGE_VIRTUAL | PMBUS_PHASE_VIRTUAL,
+	.func[1] = PMBUS_HAVE_IIN | PMBUS_HAVE_PIN | PMBUS_PAGE_VIRTUAL,
+	.func[2] = PMBUS_HAVE_IIN | PMBUS_HAVE_STATUS_INPUT |
+		PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+		PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | PMBUS_PAGE_VIRTUAL,
+	.phases[0] = MAX16601_NUM_PHASES,
+	.pfunc[0] = PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_TEMP,
+	.pfunc[1] = PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT,
+	.pfunc[2] = PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_TEMP,
+	.pfunc[3] = PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT,
+	.pfunc[4] = PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_TEMP,
+	.pfunc[5] = PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT,
+	.pfunc[6] = PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_TEMP,
+	.pfunc[7] = PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT,
+	.identify = max16601_identify,
+	.read_byte_data = max16601_read_byte,
+	.read_word_data = max16601_read_word,
+	.write_byte = max16601_write_byte,
+	.write_word_data = max16601_write_word,
+};
+
+static void max16601_remove(void *_data)
+{
+	struct max16601_data *data = _data;
+
+	i2c_unregister_device(data->vsa);
+}
+
+static const struct i2c_device_id max16601_id[] = {
+	{"max16508", max16508},
+	{"max16601", max16601},
+	{"max16602", max16602},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, max16601_id);
+
+static int max16601_get_id(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	u8 buf[I2C_SMBUS_BLOCK_MAX + 1];
+	enum chips id;
+	int ret;
+
+	ret = i2c_smbus_read_block_data(client, PMBUS_IC_DEVICE_ID, buf);
+	if (ret < 0 || ret < 11)
+		return -ENODEV;
+
+	/*
+	 * PMBUS_IC_DEVICE_ID is expected to return "MAX16601y.xx" or
+	 * MAX16602y.xx or "MAX16500y.xx".cdxxcccccccccc
+	 */
+	if (!strncmp(buf, "MAX16500", 8)) {
+		id = max16508;
+	} else if (!strncmp(buf, "MAX16601", 8)) {
+		id = max16601;
+	} else if (!strncmp(buf, "MAX16602", 8)) {
+		id = max16602;
+	} else {
+		buf[ret] = '\0';
+		dev_err(dev, "Unsupported chip '%s'\n", buf);
+		return -ENODEV;
+	}
+	return id;
+}
+
+static int max16601_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	const struct i2c_device_id *id;
+	struct max16601_data *data;
+	int ret, chip_id;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_READ_BYTE_DATA |
+				     I2C_FUNC_SMBUS_READ_BLOCK_DATA))
+		return -ENODEV;
+
+	chip_id = max16601_get_id(client);
+	if (chip_id < 0)
+		return chip_id;
+
+	id = i2c_match_id(max16601_id, client);
+	if (chip_id != id->driver_data)
+		dev_warn(&client->dev,
+			 "Device mismatch: Configured %s (%d), detected %d\n",
+			 id->name, (int) id->driver_data, chip_id);
+
+	ret = i2c_smbus_read_byte_data(client, REG_PHASE_ID);
+	if (ret < 0)
+		return ret;
+	if (!(ret & CORE_RAIL_INDICATOR)) {
+		dev_err(dev,
+			"Driver must be instantiated on CORE rail I2C address\n");
+		return -ENODEV;
+	}
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->id = chip_id;
+	data->iout_avg_pkg = 0xfc00;
+	data->vsa = i2c_new_dummy_device(client->adapter, client->addr + 1);
+	if (IS_ERR(data->vsa)) {
+		dev_err(dev, "Failed to register VSA client\n");
+		return PTR_ERR(data->vsa);
+	}
+	ret = devm_add_action_or_reset(dev, max16601_remove, data);
+	if (ret)
+		return ret;
+
+	data->info = max16601_info;
+
+	return pmbus_do_probe(client, &data->info);
+}
+
+static struct i2c_driver max16601_driver = {
+	.driver = {
+		   .name = "max16601",
+		   },
+	.probe_new = max16601_probe,
+	.id_table = max16601_id,
+};
+
+module_i2c_driver(max16601_driver);
+
+MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
+MODULE_DESCRIPTION("PMBus driver for Maxim MAX16601");
+MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/max20730.c b/drivers/hwmon/pmbus/max20730.c
new file mode 100644
index 000000000..ba39f03c6
--- /dev/null
+++ b/drivers/hwmon/pmbus/max20730.c
@@ -0,0 +1,788 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Driver for MAX20710, MAX20730, MAX20734, and MAX20743 Integrated,
+ * Step-Down Switching Regulators
+ *
+ * Copyright 2019 Google LLC.
+ * Copyright 2020 Maxim Integrated
+ */
+
+#include <linux/bits.h>
+#include <linux/debugfs.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_device.h>
+#include <linux/pmbus.h>
+#include <linux/util_macros.h>
+#include "pmbus.h"
+
+enum chips {
+	max20710,
+	max20730,
+	max20734,
+	max20743
+};
+
+enum {
+	MAX20730_DEBUGFS_VOUT_MIN = 0,
+	MAX20730_DEBUGFS_FREQUENCY,
+	MAX20730_DEBUGFS_PG_DELAY,
+	MAX20730_DEBUGFS_INTERNAL_GAIN,
+	MAX20730_DEBUGFS_BOOT_VOLTAGE,
+	MAX20730_DEBUGFS_OUT_V_RAMP_RATE,
+	MAX20730_DEBUGFS_OC_PROTECT_MODE,
+	MAX20730_DEBUGFS_SS_TIMING,
+	MAX20730_DEBUGFS_IMAX,
+	MAX20730_DEBUGFS_OPERATION,
+	MAX20730_DEBUGFS_ON_OFF_CONFIG,
+	MAX20730_DEBUGFS_SMBALERT_MASK,
+	MAX20730_DEBUGFS_VOUT_MODE,
+	MAX20730_DEBUGFS_VOUT_COMMAND,
+	MAX20730_DEBUGFS_VOUT_MAX,
+	MAX20730_DEBUGFS_NUM_ENTRIES
+};
+
+struct max20730_data {
+	enum chips id;
+	struct pmbus_driver_info info;
+	struct mutex lock;	/* Used to protect against parallel writes */
+	u16 mfr_devset1;
+	u16 mfr_devset2;
+	u16 mfr_voutmin;
+	u32 vout_voltage_divider[2];
+};
+
+#define to_max20730_data(x)  container_of(x, struct max20730_data, info)
+
+#define VOLT_FROM_REG(val)	DIV_ROUND_CLOSEST((val), 1 << 9)
+
+#define PMBUS_SMB_ALERT_MASK	0x1B
+
+#define MAX20730_MFR_VOUT_MIN	0xd1
+#define MAX20730_MFR_DEVSET1	0xd2
+#define MAX20730_MFR_DEVSET2	0xd3
+
+#define MAX20730_MFR_VOUT_MIN_MASK		GENMASK(9, 0)
+#define MAX20730_MFR_VOUT_MIN_BIT_POS		0
+
+#define MAX20730_MFR_DEVSET1_RGAIN_MASK		(BIT(13) | BIT(14))
+#define MAX20730_MFR_DEVSET1_OTP_MASK		(BIT(11) | BIT(12))
+#define MAX20730_MFR_DEVSET1_VBOOT_MASK		(BIT(8) | BIT(9))
+#define MAX20730_MFR_DEVSET1_OCP_MASK		(BIT(5) | BIT(6))
+#define MAX20730_MFR_DEVSET1_FSW_MASK		GENMASK(4, 2)
+#define MAX20730_MFR_DEVSET1_TSTAT_MASK		(BIT(0) | BIT(1))
+
+#define MAX20730_MFR_DEVSET1_RGAIN_BIT_POS	13
+#define MAX20730_MFR_DEVSET1_OTP_BIT_POS	11
+#define MAX20730_MFR_DEVSET1_VBOOT_BIT_POS	8
+#define MAX20730_MFR_DEVSET1_OCP_BIT_POS	5
+#define MAX20730_MFR_DEVSET1_FSW_BIT_POS	2
+#define MAX20730_MFR_DEVSET1_TSTAT_BIT_POS	0
+
+#define MAX20730_MFR_DEVSET2_IMAX_MASK		GENMASK(10, 8)
+#define MAX20730_MFR_DEVSET2_VRATE		(BIT(6) | BIT(7))
+#define MAX20730_MFR_DEVSET2_OCPM_MASK		BIT(5)
+#define MAX20730_MFR_DEVSET2_SS_MASK		(BIT(0) | BIT(1))
+
+#define MAX20730_MFR_DEVSET2_IMAX_BIT_POS	8
+#define MAX20730_MFR_DEVSET2_VRATE_BIT_POS	6
+#define MAX20730_MFR_DEVSET2_OCPM_BIT_POS	5
+#define MAX20730_MFR_DEVSET2_SS_BIT_POS		0
+
+#define DEBUG_FS_DATA_MAX			16
+
+struct max20730_debugfs_data {
+	struct i2c_client *client;
+	int debugfs_entries[MAX20730_DEBUGFS_NUM_ENTRIES];
+};
+
+#define to_psu(x, y) container_of((x), \
+			struct max20730_debugfs_data, debugfs_entries[(y)])
+
+#ifdef CONFIG_DEBUG_FS
+static ssize_t max20730_debugfs_read(struct file *file, char __user *buf,
+				     size_t count, loff_t *ppos)
+{
+	int ret, len;
+	int *idxp = file->private_data;
+	int idx = *idxp;
+	struct max20730_debugfs_data *psu = to_psu(idxp, idx);
+	const struct pmbus_driver_info *info;
+	const struct max20730_data *data;
+	char tbuf[DEBUG_FS_DATA_MAX] = { 0 };
+	u16 val;
+
+	info = pmbus_get_driver_info(psu->client);
+	data = to_max20730_data(info);
+
+	switch (idx) {
+	case MAX20730_DEBUGFS_VOUT_MIN:
+		ret = VOLT_FROM_REG(data->mfr_voutmin * 10000);
+		len = scnprintf(tbuf, DEBUG_FS_DATA_MAX, "%d.%d\n",
+				ret / 10000, ret % 10000);
+		break;
+	case MAX20730_DEBUGFS_FREQUENCY:
+		val = (data->mfr_devset1 & MAX20730_MFR_DEVSET1_FSW_MASK)
+			>> MAX20730_MFR_DEVSET1_FSW_BIT_POS;
+
+		if (val == 0)
+			ret = 400;
+		else if (val == 1)
+			ret = 500;
+		else if (val == 2 || val == 3)
+			ret = 600;
+		else if (val == 4)
+			ret = 700;
+		else if (val == 5)
+			ret = 800;
+		else
+			ret = 900;
+		len = scnprintf(tbuf, DEBUG_FS_DATA_MAX, "%d\n", ret);
+		break;
+	case MAX20730_DEBUGFS_PG_DELAY:
+		val = (data->mfr_devset1 & MAX20730_MFR_DEVSET1_TSTAT_MASK)
+			>> MAX20730_MFR_DEVSET1_TSTAT_BIT_POS;
+
+		if (val == 0)
+			len = strlcpy(tbuf, "2000\n", DEBUG_FS_DATA_MAX);
+		else if (val == 1)
+			len = strlcpy(tbuf, "125\n", DEBUG_FS_DATA_MAX);
+		else if (val == 2)
+			len = strlcpy(tbuf, "62.5\n", DEBUG_FS_DATA_MAX);
+		else
+			len = strlcpy(tbuf, "32\n", DEBUG_FS_DATA_MAX);
+		break;
+	case MAX20730_DEBUGFS_INTERNAL_GAIN:
+		val = (data->mfr_devset1 & MAX20730_MFR_DEVSET1_RGAIN_MASK)
+			>> MAX20730_MFR_DEVSET1_RGAIN_BIT_POS;
+
+		if (data->id == max20734) {
+			/* AN6209 */
+			if (val == 0)
+				len = strlcpy(tbuf, "0.8\n", DEBUG_FS_DATA_MAX);
+			else if (val == 1)
+				len = strlcpy(tbuf, "3.2\n", DEBUG_FS_DATA_MAX);
+			else if (val == 2)
+				len = strlcpy(tbuf, "1.6\n", DEBUG_FS_DATA_MAX);
+			else
+				len = strlcpy(tbuf, "6.4\n", DEBUG_FS_DATA_MAX);
+		} else if (data->id == max20730 || data->id == max20710) {
+			/* AN6042 or AN6140 */
+			if (val == 0)
+				len = strlcpy(tbuf, "0.9\n", DEBUG_FS_DATA_MAX);
+			else if (val == 1)
+				len = strlcpy(tbuf, "3.6\n", DEBUG_FS_DATA_MAX);
+			else if (val == 2)
+				len = strlcpy(tbuf, "1.8\n", DEBUG_FS_DATA_MAX);
+			else
+				len = strlcpy(tbuf, "7.2\n", DEBUG_FS_DATA_MAX);
+		} else if (data->id == max20743) {
+			/* AN6042 */
+			if (val == 0)
+				len = strlcpy(tbuf, "0.45\n", DEBUG_FS_DATA_MAX);
+			else if (val == 1)
+				len = strlcpy(tbuf, "1.8\n", DEBUG_FS_DATA_MAX);
+			else if (val == 2)
+				len = strlcpy(tbuf, "0.9\n", DEBUG_FS_DATA_MAX);
+			else
+				len = strlcpy(tbuf, "3.6\n", DEBUG_FS_DATA_MAX);
+		} else {
+			len = strlcpy(tbuf, "Not supported\n", DEBUG_FS_DATA_MAX);
+		}
+		break;
+	case MAX20730_DEBUGFS_BOOT_VOLTAGE:
+		val = (data->mfr_devset1 & MAX20730_MFR_DEVSET1_VBOOT_MASK)
+			>> MAX20730_MFR_DEVSET1_VBOOT_BIT_POS;
+
+		if (val == 0)
+			len = strlcpy(tbuf, "0.6484\n", DEBUG_FS_DATA_MAX);
+		else if (val == 1)
+			len = strlcpy(tbuf, "0.8984\n", DEBUG_FS_DATA_MAX);
+		else if (val == 2)
+			len = strlcpy(tbuf, "1.0\n", DEBUG_FS_DATA_MAX);
+		else
+			len = strlcpy(tbuf, "Invalid\n", DEBUG_FS_DATA_MAX);
+		break;
+	case MAX20730_DEBUGFS_OUT_V_RAMP_RATE:
+		val = (data->mfr_devset2 & MAX20730_MFR_DEVSET2_VRATE)
+			>> MAX20730_MFR_DEVSET2_VRATE_BIT_POS;
+
+		if (val == 0)
+			len = strlcpy(tbuf, "4\n", DEBUG_FS_DATA_MAX);
+		else if (val == 1)
+			len = strlcpy(tbuf, "2\n", DEBUG_FS_DATA_MAX);
+		else if (val == 2)
+			len = strlcpy(tbuf, "1\n", DEBUG_FS_DATA_MAX);
+		else
+			len = strlcpy(tbuf, "Invalid\n", DEBUG_FS_DATA_MAX);
+		break;
+	case MAX20730_DEBUGFS_OC_PROTECT_MODE:
+		ret = (data->mfr_devset2 & MAX20730_MFR_DEVSET2_OCPM_MASK)
+			>> MAX20730_MFR_DEVSET2_OCPM_BIT_POS;
+		len = scnprintf(tbuf, DEBUG_FS_DATA_MAX, "%d\n", ret);
+		break;
+	case MAX20730_DEBUGFS_SS_TIMING:
+		val = (data->mfr_devset2 & MAX20730_MFR_DEVSET2_SS_MASK)
+			>> MAX20730_MFR_DEVSET2_SS_BIT_POS;
+
+		if (val == 0)
+			len = strlcpy(tbuf, "0.75\n", DEBUG_FS_DATA_MAX);
+		else if (val == 1)
+			len = strlcpy(tbuf, "1.5\n", DEBUG_FS_DATA_MAX);
+		else if (val == 2)
+			len = strlcpy(tbuf, "3\n", DEBUG_FS_DATA_MAX);
+		else
+			len = strlcpy(tbuf, "6\n", DEBUG_FS_DATA_MAX);
+		break;
+	case MAX20730_DEBUGFS_IMAX:
+		ret = (data->mfr_devset2 & MAX20730_MFR_DEVSET2_IMAX_MASK)
+			>> MAX20730_MFR_DEVSET2_IMAX_BIT_POS;
+		len = scnprintf(tbuf, DEBUG_FS_DATA_MAX, "%d\n", ret);
+		break;
+	case MAX20730_DEBUGFS_OPERATION:
+		ret = i2c_smbus_read_byte_data(psu->client, PMBUS_OPERATION);
+		if (ret < 0)
+			return ret;
+		len = scnprintf(tbuf, DEBUG_FS_DATA_MAX, "%d\n", ret);
+		break;
+	case MAX20730_DEBUGFS_ON_OFF_CONFIG:
+		ret = i2c_smbus_read_byte_data(psu->client, PMBUS_ON_OFF_CONFIG);
+		if (ret < 0)
+			return ret;
+		len = scnprintf(tbuf, DEBUG_FS_DATA_MAX, "%d\n", ret);
+		break;
+	case MAX20730_DEBUGFS_SMBALERT_MASK:
+		ret = i2c_smbus_read_word_data(psu->client,
+					       PMBUS_SMB_ALERT_MASK);
+		if (ret < 0)
+			return ret;
+		len = scnprintf(tbuf, DEBUG_FS_DATA_MAX, "%d\n", ret);
+		break;
+	case MAX20730_DEBUGFS_VOUT_MODE:
+		ret = i2c_smbus_read_byte_data(psu->client, PMBUS_VOUT_MODE);
+		if (ret < 0)
+			return ret;
+		len = scnprintf(tbuf, DEBUG_FS_DATA_MAX, "%d\n", ret);
+		break;
+	case MAX20730_DEBUGFS_VOUT_COMMAND:
+		ret = i2c_smbus_read_word_data(psu->client, PMBUS_VOUT_COMMAND);
+		if (ret < 0)
+			return ret;
+
+		ret = VOLT_FROM_REG(ret * 10000);
+		len = scnprintf(tbuf, DEBUG_FS_DATA_MAX,
+				"%d.%d\n", ret / 10000, ret % 10000);
+		break;
+	case MAX20730_DEBUGFS_VOUT_MAX:
+		ret = i2c_smbus_read_word_data(psu->client, PMBUS_VOUT_MAX);
+		if (ret < 0)
+			return ret;
+
+		ret = VOLT_FROM_REG(ret * 10000);
+		len = scnprintf(tbuf, DEBUG_FS_DATA_MAX,
+				"%d.%d\n", ret / 10000, ret % 10000);
+		break;
+	default:
+		len = strlcpy(tbuf, "Invalid\n", DEBUG_FS_DATA_MAX);
+	}
+
+	return simple_read_from_buffer(buf, count, ppos, tbuf, len);
+}
+
+static const struct file_operations max20730_fops = {
+	.llseek = noop_llseek,
+	.read = max20730_debugfs_read,
+	.write = NULL,
+	.open = simple_open,
+};
+
+static int max20730_init_debugfs(struct i2c_client *client,
+				 struct max20730_data *data)
+{
+	int ret, i;
+	struct dentry *debugfs;
+	struct dentry *max20730_dir;
+	struct max20730_debugfs_data *psu;
+
+	ret = i2c_smbus_read_word_data(client, MAX20730_MFR_DEVSET2);
+	if (ret < 0)
+		return ret;
+	data->mfr_devset2 = ret;
+
+	ret = i2c_smbus_read_word_data(client, MAX20730_MFR_VOUT_MIN);
+	if (ret < 0)
+		return ret;
+	data->mfr_voutmin = ret;
+
+	psu = devm_kzalloc(&client->dev, sizeof(*psu), GFP_KERNEL);
+	if (!psu)
+		return -ENOMEM;
+	psu->client = client;
+
+	debugfs = pmbus_get_debugfs_dir(client);
+	if (!debugfs)
+		return -ENOENT;
+
+	max20730_dir = debugfs_create_dir(client->name, debugfs);
+
+	for (i = 0; i < MAX20730_DEBUGFS_NUM_ENTRIES; ++i)
+		psu->debugfs_entries[i] = i;
+
+	debugfs_create_file("vout_min", 0444, max20730_dir,
+			    &psu->debugfs_entries[MAX20730_DEBUGFS_VOUT_MIN],
+			    &max20730_fops);
+	debugfs_create_file("frequency", 0444, max20730_dir,
+			    &psu->debugfs_entries[MAX20730_DEBUGFS_FREQUENCY],
+			    &max20730_fops);
+	debugfs_create_file("power_good_delay", 0444, max20730_dir,
+			    &psu->debugfs_entries[MAX20730_DEBUGFS_PG_DELAY],
+			    &max20730_fops);
+	debugfs_create_file("internal_gain", 0444, max20730_dir,
+			    &psu->debugfs_entries[MAX20730_DEBUGFS_INTERNAL_GAIN],
+			    &max20730_fops);
+	debugfs_create_file("boot_voltage", 0444, max20730_dir,
+			    &psu->debugfs_entries[MAX20730_DEBUGFS_BOOT_VOLTAGE],
+			    &max20730_fops);
+	debugfs_create_file("out_voltage_ramp_rate", 0444, max20730_dir,
+			    &psu->debugfs_entries[MAX20730_DEBUGFS_OUT_V_RAMP_RATE],
+			    &max20730_fops);
+	debugfs_create_file("oc_protection_mode", 0444, max20730_dir,
+			    &psu->debugfs_entries[MAX20730_DEBUGFS_OC_PROTECT_MODE],
+			    &max20730_fops);
+	debugfs_create_file("soft_start_timing", 0444, max20730_dir,
+			    &psu->debugfs_entries[MAX20730_DEBUGFS_SS_TIMING],
+			    &max20730_fops);
+	debugfs_create_file("imax", 0444, max20730_dir,
+			    &psu->debugfs_entries[MAX20730_DEBUGFS_IMAX],
+			    &max20730_fops);
+	debugfs_create_file("operation", 0444, max20730_dir,
+			    &psu->debugfs_entries[MAX20730_DEBUGFS_OPERATION],
+			    &max20730_fops);
+	debugfs_create_file("on_off_config", 0444, max20730_dir,
+			    &psu->debugfs_entries[MAX20730_DEBUGFS_ON_OFF_CONFIG],
+			    &max20730_fops);
+	debugfs_create_file("smbalert_mask", 0444, max20730_dir,
+			    &psu->debugfs_entries[MAX20730_DEBUGFS_SMBALERT_MASK],
+			    &max20730_fops);
+	debugfs_create_file("vout_mode", 0444, max20730_dir,
+			    &psu->debugfs_entries[MAX20730_DEBUGFS_VOUT_MODE],
+			    &max20730_fops);
+	debugfs_create_file("vout_command", 0444, max20730_dir,
+			    &psu->debugfs_entries[MAX20730_DEBUGFS_VOUT_COMMAND],
+			    &max20730_fops);
+	debugfs_create_file("vout_max", 0444, max20730_dir,
+			    &psu->debugfs_entries[MAX20730_DEBUGFS_VOUT_MAX],
+			    &max20730_fops);
+
+	return 0;
+}
+#else
+static int max20730_init_debugfs(struct i2c_client *client,
+				 struct max20730_data *data)
+{
+	return 0;
+}
+#endif /* CONFIG_DEBUG_FS */
+
+static const struct i2c_device_id max20730_id[];
+
+/*
+ * Convert discreet value to direct data format. Strictly speaking, all passed
+ * values are constants, so we could do that calculation manually. On the
+ * downside, that would make the driver more difficult to maintain, so lets
+ * use this approach.
+ */
+static u16 val_to_direct(int v, enum pmbus_sensor_classes class,
+			 const struct pmbus_driver_info *info)
+{
+	int R = info->R[class] - 3;	/* take milli-units into account */
+	int b = info->b[class] * 1000;
+	long d;
+
+	d = v * info->m[class] + b;
+	/*
+	 * R < 0 is true for all callers, so we don't need to bother
+	 * about the R > 0 case.
+	 */
+	while (R < 0) {
+		d = DIV_ROUND_CLOSEST(d, 10);
+		R++;
+	}
+	return (u16)d;
+}
+
+static long direct_to_val(u16 w, enum pmbus_sensor_classes class,
+			  const struct pmbus_driver_info *info)
+{
+	int R = info->R[class] - 3;
+	int b = info->b[class] * 1000;
+	int m = info->m[class];
+	long d = (s16)w;
+
+	if (m == 0)
+		return 0;
+
+	while (R < 0) {
+		d *= 10;
+		R++;
+	}
+	d = (d - b) / m;
+	return d;
+}
+
+static u32 max_current[][5] = {
+	[max20710] = { 6200, 8000, 9700, 11600 },
+	[max20730] = { 13000, 16600, 20100, 23600 },
+	[max20734] = { 21000, 27000, 32000, 38000 },
+	[max20743] = { 18900, 24100, 29200, 34100 },
+};
+
+static int max20730_read_word_data(struct i2c_client *client, int page,
+				   int phase, int reg)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	const struct max20730_data *data = to_max20730_data(info);
+	int ret = 0;
+	u32 max_c;
+
+	switch (reg) {
+	case PMBUS_OT_FAULT_LIMIT:
+		switch ((data->mfr_devset1 >> 11) & 0x3) {
+		case 0x0:
+			ret = val_to_direct(150000, PSC_TEMPERATURE, info);
+			break;
+		case 0x1:
+			ret = val_to_direct(130000, PSC_TEMPERATURE, info);
+			break;
+		default:
+			ret = -ENODATA;
+			break;
+		}
+		break;
+	case PMBUS_IOUT_OC_FAULT_LIMIT:
+		max_c = max_current[data->id][(data->mfr_devset1 >> 5) & 0x3];
+		ret = val_to_direct(max_c, PSC_CURRENT_OUT, info);
+		break;
+	case PMBUS_READ_VOUT:
+		ret = pmbus_read_word_data(client, page, phase, reg);
+		if (ret > 0 && data->vout_voltage_divider[0] && data->vout_voltage_divider[1]) {
+			u64 temp = DIV_ROUND_CLOSEST_ULL((u64)ret * data->vout_voltage_divider[1],
+							 data->vout_voltage_divider[0]);
+			ret = clamp_val(temp, 0, 0xffff);
+		}
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
+static int max20730_write_word_data(struct i2c_client *client, int page,
+				    int reg, u16 word)
+{
+	struct pmbus_driver_info *info;
+	struct max20730_data *data;
+	u16 devset1;
+	int ret = 0;
+	int idx;
+
+	info = (struct pmbus_driver_info *)pmbus_get_driver_info(client);
+	data = to_max20730_data(info);
+
+	mutex_lock(&data->lock);
+	devset1 = data->mfr_devset1;
+
+	switch (reg) {
+	case PMBUS_OT_FAULT_LIMIT:
+		devset1 &= ~(BIT(11) | BIT(12));
+		if (direct_to_val(word, PSC_TEMPERATURE, info) < 140000)
+			devset1 |= BIT(11);
+		break;
+	case PMBUS_IOUT_OC_FAULT_LIMIT:
+		devset1 &= ~(BIT(5) | BIT(6));
+
+		idx = find_closest(direct_to_val(word, PSC_CURRENT_OUT, info),
+				   max_current[data->id], 4);
+		devset1 |= (idx << 5);
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+
+	if (!ret && devset1 != data->mfr_devset1) {
+		ret = i2c_smbus_write_word_data(client, MAX20730_MFR_DEVSET1,
+						devset1);
+		if (!ret) {
+			data->mfr_devset1 = devset1;
+			pmbus_clear_cache(client);
+		}
+	}
+	mutex_unlock(&data->lock);
+	return ret;
+}
+
+static const struct pmbus_driver_info max20730_info[] = {
+	[max20710] = {
+		.pages = 1,
+		.read_word_data = max20730_read_word_data,
+		.write_word_data = max20730_write_word_data,
+
+		/* Source : Maxim AN6140 and AN6042 */
+		.format[PSC_TEMPERATURE] = direct,
+		.m[PSC_TEMPERATURE] = 21,
+		.b[PSC_TEMPERATURE] = 5887,
+		.R[PSC_TEMPERATURE] = -1,
+
+		.format[PSC_VOLTAGE_IN] = direct,
+		.m[PSC_VOLTAGE_IN] = 3609,
+		.b[PSC_VOLTAGE_IN] = 0,
+		.R[PSC_VOLTAGE_IN] = -2,
+
+		.format[PSC_CURRENT_OUT] = direct,
+		.m[PSC_CURRENT_OUT] = 153,
+		.b[PSC_CURRENT_OUT] = 4976,
+		.R[PSC_CURRENT_OUT] = -1,
+
+		.format[PSC_VOLTAGE_OUT] = linear,
+
+		.func[0] = PMBUS_HAVE_VIN |
+			PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+			PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+			PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP |
+			PMBUS_HAVE_STATUS_INPUT,
+	},
+	[max20730] = {
+		.pages = 1,
+		.read_word_data = max20730_read_word_data,
+		.write_word_data = max20730_write_word_data,
+
+		/* Source : Maxim AN6042 */
+		.format[PSC_TEMPERATURE] = direct,
+		.m[PSC_TEMPERATURE] = 21,
+		.b[PSC_TEMPERATURE] = 5887,
+		.R[PSC_TEMPERATURE] = -1,
+
+		.format[PSC_VOLTAGE_IN] = direct,
+		.m[PSC_VOLTAGE_IN] = 3609,
+		.b[PSC_VOLTAGE_IN] = 0,
+		.R[PSC_VOLTAGE_IN] = -2,
+
+		/*
+		 * Values in the datasheet are adjusted for temperature and
+		 * for the relationship between Vin and Vout.
+		 * Unfortunately, the data sheet suggests that Vout measurement
+		 * may be scaled with a resistor array. This is indeed the case
+		 * at least on the evaulation boards. As a result, any in-driver
+		 * adjustments would either be wrong or require elaborate means
+		 * to configure the scaling. Instead of doing that, just report
+		 * raw values and let userspace handle adjustments.
+		 */
+		.format[PSC_CURRENT_OUT] = direct,
+		.m[PSC_CURRENT_OUT] = 153,
+		.b[PSC_CURRENT_OUT] = 4976,
+		.R[PSC_CURRENT_OUT] = -1,
+
+		.format[PSC_VOLTAGE_OUT] = linear,
+
+		.func[0] = PMBUS_HAVE_VIN |
+			PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+			PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+			PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP |
+			PMBUS_HAVE_STATUS_INPUT,
+	},
+	[max20734] = {
+		.pages = 1,
+		.read_word_data = max20730_read_word_data,
+		.write_word_data = max20730_write_word_data,
+
+		/* Source : Maxim AN6209 */
+		.format[PSC_TEMPERATURE] = direct,
+		.m[PSC_TEMPERATURE] = 21,
+		.b[PSC_TEMPERATURE] = 5887,
+		.R[PSC_TEMPERATURE] = -1,
+
+		.format[PSC_VOLTAGE_IN] = direct,
+		.m[PSC_VOLTAGE_IN] = 3592,
+		.b[PSC_VOLTAGE_IN] = 0,
+		.R[PSC_VOLTAGE_IN] = -2,
+
+		.format[PSC_CURRENT_OUT] = direct,
+		.m[PSC_CURRENT_OUT] = 111,
+		.b[PSC_CURRENT_OUT] = 3461,
+		.R[PSC_CURRENT_OUT] = -1,
+
+		.format[PSC_VOLTAGE_OUT] = linear,
+
+		.func[0] = PMBUS_HAVE_VIN |
+			PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+			PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+			PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP |
+			PMBUS_HAVE_STATUS_INPUT,
+	},
+	[max20743] = {
+		.pages = 1,
+		.read_word_data = max20730_read_word_data,
+		.write_word_data = max20730_write_word_data,
+
+		/* Source : Maxim AN6042 */
+		.format[PSC_TEMPERATURE] = direct,
+		.m[PSC_TEMPERATURE] = 21,
+		.b[PSC_TEMPERATURE] = 5887,
+		.R[PSC_TEMPERATURE] = -1,
+
+		.format[PSC_VOLTAGE_IN] = direct,
+		.m[PSC_VOLTAGE_IN] = 3597,
+		.b[PSC_VOLTAGE_IN] = 0,
+		.R[PSC_VOLTAGE_IN] = -2,
+
+		.format[PSC_CURRENT_OUT] = direct,
+		.m[PSC_CURRENT_OUT] = 95,
+		.b[PSC_CURRENT_OUT] = 5014,
+		.R[PSC_CURRENT_OUT] = -1,
+
+		.format[PSC_VOLTAGE_OUT] = linear,
+
+		.func[0] = PMBUS_HAVE_VIN |
+			PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+			PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+			PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP |
+			PMBUS_HAVE_STATUS_INPUT,
+	},
+};
+
+static int max20730_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	u8 buf[I2C_SMBUS_BLOCK_MAX + 1];
+	struct max20730_data *data;
+	enum chips chip_id;
+	int ret;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_READ_BYTE_DATA |
+				     I2C_FUNC_SMBUS_READ_WORD_DATA |
+				     I2C_FUNC_SMBUS_BLOCK_DATA))
+		return -ENODEV;
+
+	ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, buf);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to read Manufacturer ID\n");
+		return ret;
+	}
+	if (ret != 5 || strncmp(buf, "MAXIM", 5)) {
+		buf[ret] = '\0';
+		dev_err(dev, "Unsupported Manufacturer ID '%s'\n", buf);
+		return -ENODEV;
+	}
+
+	/*
+	 * The chips support reading PMBUS_MFR_MODEL. On both MAX20730
+	 * and MAX20734, reading it returns M20743. Presumably that is
+	 * the reason why the command is not documented. Unfortunately,
+	 * that means that there is no reliable means to detect the chip.
+	 * However, we can at least detect the chip series. Compare
+	 * the returned value against 'M20743' and bail out if there is
+	 * a mismatch. If that doesn't work for all chips, we may have
+	 * to remove this check.
+	 */
+	ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, buf);
+	if (ret < 0) {
+		dev_err(dev, "Failed to read Manufacturer Model\n");
+		return ret;
+	}
+	if (ret != 6 || strncmp(buf, "M20743", 6)) {
+		buf[ret] = '\0';
+		dev_err(dev, "Unsupported Manufacturer Model '%s'\n", buf);
+		return -ENODEV;
+	}
+
+	ret = i2c_smbus_read_block_data(client, PMBUS_MFR_REVISION, buf);
+	if (ret < 0) {
+		dev_err(dev, "Failed to read Manufacturer Revision\n");
+		return ret;
+	}
+	if (ret != 1 || buf[0] != 'F') {
+		buf[ret] = '\0';
+		dev_err(dev, "Unsupported Manufacturer Revision '%s'\n", buf);
+		return -ENODEV;
+	}
+
+	if (client->dev.of_node)
+		chip_id = (enum chips)of_device_get_match_data(dev);
+	else
+		chip_id = i2c_match_id(max20730_id, client)->driver_data;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+	data->id = chip_id;
+	mutex_init(&data->lock);
+	memcpy(&data->info, &max20730_info[chip_id], sizeof(data->info));
+	if (of_property_read_u32_array(client->dev.of_node, "vout-voltage-divider",
+				       data->vout_voltage_divider,
+				       ARRAY_SIZE(data->vout_voltage_divider)) != 0)
+		memset(data->vout_voltage_divider, 0, sizeof(data->vout_voltage_divider));
+	if (data->vout_voltage_divider[1] < data->vout_voltage_divider[0]) {
+		dev_err(dev,
+			"The total resistance of voltage divider is less than output resistance\n");
+		return -EINVAL;
+	}
+
+	ret = i2c_smbus_read_word_data(client, MAX20730_MFR_DEVSET1);
+	if (ret < 0)
+		return ret;
+	data->mfr_devset1 = ret;
+
+	ret = pmbus_do_probe(client, &data->info);
+	if (ret < 0)
+		return ret;
+
+	ret = max20730_init_debugfs(client, data);
+	if (ret)
+		dev_warn(dev, "Failed to register debugfs: %d\n",
+			 ret);
+
+	return 0;
+}
+
+static const struct i2c_device_id max20730_id[] = {
+	{ "max20710", max20710 },
+	{ "max20730", max20730 },
+	{ "max20734", max20734 },
+	{ "max20743", max20743 },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(i2c, max20730_id);
+
+static const struct of_device_id max20730_of_match[] = {
+	{ .compatible = "maxim,max20710", .data = (void *)max20710 },
+	{ .compatible = "maxim,max20730", .data = (void *)max20730 },
+	{ .compatible = "maxim,max20734", .data = (void *)max20734 },
+	{ .compatible = "maxim,max20743", .data = (void *)max20743 },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(of, max20730_of_match);
+
+static struct i2c_driver max20730_driver = {
+	.driver = {
+		.name = "max20730",
+		.of_match_table = max20730_of_match,
+	},
+	.probe_new = max20730_probe,
+	.id_table = max20730_id,
+};
+
+module_i2c_driver(max20730_driver);
+
+MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
+MODULE_DESCRIPTION("PMBus driver for Maxim MAX20710 / MAX20730 / MAX20734 / MAX20743");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/max20751.c b/drivers/hwmon/pmbus/max20751.c
new file mode 100644
index 000000000..2272dc8c2
--- /dev/null
+++ b/drivers/hwmon/pmbus/max20751.c
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Hardware monitoring driver for Maxim MAX20751
+ *
+ * Copyright (c) 2015 Guenter Roeck
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include "pmbus.h"
+
+static struct pmbus_driver_info max20751_info = {
+	.pages = 1,
+	.format[PSC_VOLTAGE_IN] = linear,
+	.format[PSC_VOLTAGE_OUT] = vid,
+	.vrm_version[0] = vr12,
+	.format[PSC_TEMPERATURE] = linear,
+	.format[PSC_CURRENT_OUT] = linear,
+	.format[PSC_POWER] = linear,
+	.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+		PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+		PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP |
+		PMBUS_HAVE_POUT,
+};
+
+static int max20751_probe(struct i2c_client *client)
+{
+	return pmbus_do_probe(client, &max20751_info);
+}
+
+static const struct i2c_device_id max20751_id[] = {
+	{"max20751", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, max20751_id);
+
+static struct i2c_driver max20751_driver = {
+	.driver = {
+		   .name = "max20751",
+		   },
+	.probe_new = max20751_probe,
+	.id_table = max20751_id,
+};
+
+module_i2c_driver(max20751_driver);
+
+MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
+MODULE_DESCRIPTION("PMBus driver for Maxim MAX20751");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/max31785.c b/drivers/hwmon/pmbus/max31785.c
new file mode 100644
index 000000000..95d79a64b
--- /dev/null
+++ b/drivers/hwmon/pmbus/max31785.c
@@ -0,0 +1,406 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2017 IBM Corp.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include "pmbus.h"
+
+enum max31785_regs {
+	MFR_REVISION		= 0x9b,
+	MFR_FAN_CONFIG		= 0xf1,
+};
+
+#define MAX31785			0x3030
+#define MAX31785A			0x3040
+#define MAX31785B			0x3061
+
+#define MFR_FAN_CONFIG_DUAL_TACH	BIT(12)
+
+#define MAX31785_NR_PAGES		23
+#define MAX31785_NR_FAN_PAGES		6
+
+static int max31785_read_byte_data(struct i2c_client *client, int page,
+				   int reg)
+{
+	if (page < MAX31785_NR_PAGES)
+		return -ENODATA;
+
+	switch (reg) {
+	case PMBUS_VOUT_MODE:
+		return -ENOTSUPP;
+	case PMBUS_FAN_CONFIG_12:
+		return pmbus_read_byte_data(client, page - MAX31785_NR_PAGES,
+					    reg);
+	}
+
+	return -ENODATA;
+}
+
+static int max31785_write_byte(struct i2c_client *client, int page, u8 value)
+{
+	if (page < MAX31785_NR_PAGES)
+		return -ENODATA;
+
+	return -ENOTSUPP;
+}
+
+static int max31785_read_long_data(struct i2c_client *client, int page,
+				   int reg, u32 *data)
+{
+	unsigned char cmdbuf[1];
+	unsigned char rspbuf[4];
+	int rc;
+
+	struct i2c_msg msg[2] = {
+		{
+			.addr = client->addr,
+			.flags = 0,
+			.len = sizeof(cmdbuf),
+			.buf = cmdbuf,
+		},
+		{
+			.addr = client->addr,
+			.flags = I2C_M_RD,
+			.len = sizeof(rspbuf),
+			.buf = rspbuf,
+		},
+	};
+
+	cmdbuf[0] = reg;
+
+	rc = pmbus_set_page(client, page, 0xff);
+	if (rc < 0)
+		return rc;
+
+	rc = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
+	if (rc < 0)
+		return rc;
+
+	*data = (rspbuf[0] << (0 * 8)) | (rspbuf[1] << (1 * 8)) |
+		(rspbuf[2] << (2 * 8)) | (rspbuf[3] << (3 * 8));
+
+	return rc;
+}
+
+static int max31785_get_pwm(struct i2c_client *client, int page)
+{
+	int rv;
+
+	rv = pmbus_get_fan_rate_device(client, page, 0, percent);
+	if (rv < 0)
+		return rv;
+	else if (rv >= 0x8000)
+		return 0;
+	else if (rv >= 0x2711)
+		return 0x2710;
+
+	return rv;
+}
+
+static int max31785_get_pwm_mode(struct i2c_client *client, int page)
+{
+	int config;
+	int command;
+
+	config = pmbus_read_byte_data(client, page, PMBUS_FAN_CONFIG_12);
+	if (config < 0)
+		return config;
+
+	command = pmbus_read_word_data(client, page, 0xff, PMBUS_FAN_COMMAND_1);
+	if (command < 0)
+		return command;
+
+	if (config & PB_FAN_1_RPM)
+		return (command >= 0x8000) ? 3 : 2;
+
+	if (command >= 0x8000)
+		return 3;
+	else if (command >= 0x2711)
+		return 0;
+
+	return 1;
+}
+
+static int max31785_read_word_data(struct i2c_client *client, int page,
+				   int phase, int reg)
+{
+	u32 val;
+	int rv;
+
+	switch (reg) {
+	case PMBUS_READ_FAN_SPEED_1:
+		if (page < MAX31785_NR_PAGES)
+			return -ENODATA;
+
+		rv = max31785_read_long_data(client, page - MAX31785_NR_PAGES,
+					     reg, &val);
+		if (rv < 0)
+			return rv;
+
+		rv = (val >> 16) & 0xffff;
+		break;
+	case PMBUS_FAN_COMMAND_1:
+		/*
+		 * PMBUS_FAN_COMMAND_x is probed to judge whether or not to
+		 * expose fan control registers.
+		 *
+		 * Don't expose fan_target attribute for virtual pages.
+		 */
+		rv = (page >= MAX31785_NR_PAGES) ? -ENOTSUPP : -ENODATA;
+		break;
+	case PMBUS_VIRT_PWM_1:
+		rv = max31785_get_pwm(client, page);
+		break;
+	case PMBUS_VIRT_PWM_ENABLE_1:
+		rv = max31785_get_pwm_mode(client, page);
+		break;
+	default:
+		rv = -ENODATA;
+		break;
+	}
+
+	return rv;
+}
+
+static inline u32 max31785_scale_pwm(u32 sensor_val)
+{
+	/*
+	 * The datasheet describes the accepted value range for manual PWM as
+	 * [0, 0x2710], while the hwmon pwmX sysfs interface accepts values in
+	 * [0, 255]. The MAX31785 uses DIRECT mode to scale the FAN_COMMAND
+	 * registers and in PWM mode the coefficients are m=1, b=0, R=2. The
+	 * important observation here is that 0x2710 == 10000 == 100 * 100.
+	 *
+	 * R=2 (== 10^2 == 100) accounts for scaling the value provided at the
+	 * sysfs interface into the required hardware resolution, but it does
+	 * not yet yield a value that we can write to the device (this initial
+	 * scaling is handled by pmbus_data2reg()). Multiplying by 100 below
+	 * translates the parameter value into the percentage units required by
+	 * PMBus, and then we scale back by 255 as required by the hwmon pwmX
+	 * interface to yield the percentage value at the appropriate
+	 * resolution for hardware.
+	 */
+	return (sensor_val * 100) / 255;
+}
+
+static int max31785_pwm_enable(struct i2c_client *client, int page,
+				    u16 word)
+{
+	int config = 0;
+	int rate;
+
+	switch (word) {
+	case 0:
+		rate = 0x7fff;
+		break;
+	case 1:
+		rate = pmbus_get_fan_rate_cached(client, page, 0, percent);
+		if (rate < 0)
+			return rate;
+		rate = max31785_scale_pwm(rate);
+		break;
+	case 2:
+		config = PB_FAN_1_RPM;
+		rate = pmbus_get_fan_rate_cached(client, page, 0, rpm);
+		if (rate < 0)
+			return rate;
+		break;
+	case 3:
+		rate = 0xffff;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return pmbus_update_fan(client, page, 0, config, PB_FAN_1_RPM, rate);
+}
+
+static int max31785_write_word_data(struct i2c_client *client, int page,
+				    int reg, u16 word)
+{
+	switch (reg) {
+	case PMBUS_VIRT_PWM_1:
+		return pmbus_update_fan(client, page, 0, 0, PB_FAN_1_RPM,
+					max31785_scale_pwm(word));
+	case PMBUS_VIRT_PWM_ENABLE_1:
+		return max31785_pwm_enable(client, page, word);
+	default:
+		break;
+	}
+
+	return -ENODATA;
+}
+
+#define MAX31785_FAN_FUNCS \
+	(PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12 | PMBUS_HAVE_PWM12)
+
+#define MAX31785_TEMP_FUNCS \
+	(PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP)
+
+#define MAX31785_VOUT_FUNCS \
+	(PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT)
+
+static const struct pmbus_driver_info max31785_info = {
+	.pages = MAX31785_NR_PAGES,
+
+	.write_word_data = max31785_write_word_data,
+	.read_byte_data = max31785_read_byte_data,
+	.read_word_data = max31785_read_word_data,
+	.write_byte = max31785_write_byte,
+
+	/* RPM */
+	.format[PSC_FAN] = direct,
+	.m[PSC_FAN] = 1,
+	.b[PSC_FAN] = 0,
+	.R[PSC_FAN] = 0,
+	/* PWM */
+	.format[PSC_PWM] = direct,
+	.m[PSC_PWM] = 1,
+	.b[PSC_PWM] = 0,
+	.R[PSC_PWM] = 2,
+	.func[0] = MAX31785_FAN_FUNCS,
+	.func[1] = MAX31785_FAN_FUNCS,
+	.func[2] = MAX31785_FAN_FUNCS,
+	.func[3] = MAX31785_FAN_FUNCS,
+	.func[4] = MAX31785_FAN_FUNCS,
+	.func[5] = MAX31785_FAN_FUNCS,
+
+	.format[PSC_TEMPERATURE] = direct,
+	.m[PSC_TEMPERATURE] = 1,
+	.b[PSC_TEMPERATURE] = 0,
+	.R[PSC_TEMPERATURE] = 2,
+	.func[6]  = MAX31785_TEMP_FUNCS,
+	.func[7]  = MAX31785_TEMP_FUNCS,
+	.func[8]  = MAX31785_TEMP_FUNCS,
+	.func[9]  = MAX31785_TEMP_FUNCS,
+	.func[10] = MAX31785_TEMP_FUNCS,
+	.func[11] = MAX31785_TEMP_FUNCS,
+	.func[12] = MAX31785_TEMP_FUNCS,
+	.func[13] = MAX31785_TEMP_FUNCS,
+	.func[14] = MAX31785_TEMP_FUNCS,
+	.func[15] = MAX31785_TEMP_FUNCS,
+	.func[16] = MAX31785_TEMP_FUNCS,
+
+	.format[PSC_VOLTAGE_OUT] = direct,
+	.m[PSC_VOLTAGE_OUT] = 1,
+	.b[PSC_VOLTAGE_OUT] = 0,
+	.R[PSC_VOLTAGE_OUT] = 0,
+	.func[17] = MAX31785_VOUT_FUNCS,
+	.func[18] = MAX31785_VOUT_FUNCS,
+	.func[19] = MAX31785_VOUT_FUNCS,
+	.func[20] = MAX31785_VOUT_FUNCS,
+	.func[21] = MAX31785_VOUT_FUNCS,
+	.func[22] = MAX31785_VOUT_FUNCS,
+};
+
+static int max31785_configure_dual_tach(struct i2c_client *client,
+					struct pmbus_driver_info *info)
+{
+	int ret;
+	int i;
+
+	for (i = 0; i < MAX31785_NR_FAN_PAGES; i++) {
+		ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, i);
+		if (ret < 0)
+			return ret;
+
+		ret = i2c_smbus_read_word_data(client, MFR_FAN_CONFIG);
+		if (ret < 0)
+			return ret;
+
+		if (ret & MFR_FAN_CONFIG_DUAL_TACH) {
+			int virtual = MAX31785_NR_PAGES + i;
+
+			info->pages = virtual + 1;
+			info->func[virtual] |= PMBUS_HAVE_FAN12;
+			info->func[virtual] |= PMBUS_PAGE_VIRTUAL;
+		}
+	}
+
+	return 0;
+}
+
+static int max31785_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct pmbus_driver_info *info;
+	bool dual_tach = false;
+	int ret;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_BYTE_DATA |
+				     I2C_FUNC_SMBUS_WORD_DATA))
+		return -ENODEV;
+
+	info = devm_kzalloc(dev, sizeof(struct pmbus_driver_info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	*info = max31785_info;
+
+	ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, 255);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_read_word_data(client, MFR_REVISION);
+	if (ret < 0)
+		return ret;
+
+	if (ret == MAX31785A || ret == MAX31785B) {
+		dual_tach = true;
+	} else if (ret == MAX31785) {
+		if (!strcmp("max31785a", client->name) ||
+		    !strcmp("max31785b", client->name))
+			dev_warn(dev, "Expected max31785a/b, found max31785: cannot provide secondary tachometer readings\n");
+	} else {
+		dev_err(dev, "Unrecognized MAX31785 revision: %x\n", ret);
+		return -ENODEV;
+	}
+
+	if (dual_tach) {
+		ret = max31785_configure_dual_tach(client, info);
+		if (ret < 0)
+			return ret;
+	}
+
+	return pmbus_do_probe(client, info);
+}
+
+static const struct i2c_device_id max31785_id[] = {
+	{ "max31785", 0 },
+	{ "max31785a", 0 },
+	{ "max31785b", 0 },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(i2c, max31785_id);
+
+static const struct of_device_id max31785_of_match[] = {
+	{ .compatible = "maxim,max31785" },
+	{ .compatible = "maxim,max31785a" },
+	{ .compatible = "maxim,max31785b" },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(of, max31785_of_match);
+
+static struct i2c_driver max31785_driver = {
+	.driver = {
+		.name = "max31785",
+		.of_match_table = max31785_of_match,
+	},
+	.probe_new = max31785_probe,
+	.id_table = max31785_id,
+};
+
+module_i2c_driver(max31785_driver);
+
+MODULE_AUTHOR("Andrew Jeffery <andrew@aj.id.au>");
+MODULE_DESCRIPTION("PMBus driver for the Maxim MAX31785");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/max34440.c b/drivers/hwmon/pmbus/max34440.c
new file mode 100644
index 000000000..ea7609058
--- /dev/null
+++ b/drivers/hwmon/pmbus/max34440.c
@@ -0,0 +1,532 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Hardware monitoring driver for Maxim MAX34440/MAX34441
+ *
+ * Copyright (c) 2011 Ericsson AB.
+ * Copyright (c) 2012 Guenter Roeck
+ */
+
+#include <linux/bitops.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include "pmbus.h"
+
+enum chips { max34440, max34441, max34446, max34451, max34460, max34461 };
+
+#define MAX34440_MFR_VOUT_PEAK		0xd4
+#define MAX34440_MFR_IOUT_PEAK		0xd5
+#define MAX34440_MFR_TEMPERATURE_PEAK	0xd6
+#define MAX34440_MFR_VOUT_MIN		0xd7
+
+#define MAX34446_MFR_POUT_PEAK		0xe0
+#define MAX34446_MFR_POUT_AVG		0xe1
+#define MAX34446_MFR_IOUT_AVG		0xe2
+#define MAX34446_MFR_TEMPERATURE_AVG	0xe3
+
+#define MAX34440_STATUS_OC_WARN		BIT(0)
+#define MAX34440_STATUS_OC_FAULT	BIT(1)
+#define MAX34440_STATUS_OT_FAULT	BIT(5)
+#define MAX34440_STATUS_OT_WARN		BIT(6)
+
+/*
+ * The whole max344* family have IOUT_OC_WARN_LIMIT and IOUT_OC_FAULT_LIMIT
+ * swapped from the standard pmbus spec addresses.
+ */
+#define MAX34440_IOUT_OC_WARN_LIMIT	0x46
+#define MAX34440_IOUT_OC_FAULT_LIMIT	0x4A
+
+#define MAX34451_MFR_CHANNEL_CONFIG	0xe4
+#define MAX34451_MFR_CHANNEL_CONFIG_SEL_MASK	0x3f
+
+struct max34440_data {
+	int id;
+	struct pmbus_driver_info info;
+};
+
+#define to_max34440_data(x)  container_of(x, struct max34440_data, info)
+
+static const struct i2c_device_id max34440_id[];
+
+static int max34440_read_word_data(struct i2c_client *client, int page,
+				   int phase, int reg)
+{
+	int ret;
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	const struct max34440_data *data = to_max34440_data(info);
+
+	switch (reg) {
+	case PMBUS_IOUT_OC_FAULT_LIMIT:
+		ret = pmbus_read_word_data(client, page, phase,
+					   MAX34440_IOUT_OC_FAULT_LIMIT);
+		break;
+	case PMBUS_IOUT_OC_WARN_LIMIT:
+		ret = pmbus_read_word_data(client, page, phase,
+					   MAX34440_IOUT_OC_WARN_LIMIT);
+		break;
+	case PMBUS_VIRT_READ_VOUT_MIN:
+		ret = pmbus_read_word_data(client, page, phase,
+					   MAX34440_MFR_VOUT_MIN);
+		break;
+	case PMBUS_VIRT_READ_VOUT_MAX:
+		ret = pmbus_read_word_data(client, page, phase,
+					   MAX34440_MFR_VOUT_PEAK);
+		break;
+	case PMBUS_VIRT_READ_IOUT_AVG:
+		if (data->id != max34446 && data->id != max34451)
+			return -ENXIO;
+		ret = pmbus_read_word_data(client, page, phase,
+					   MAX34446_MFR_IOUT_AVG);
+		break;
+	case PMBUS_VIRT_READ_IOUT_MAX:
+		ret = pmbus_read_word_data(client, page, phase,
+					   MAX34440_MFR_IOUT_PEAK);
+		break;
+	case PMBUS_VIRT_READ_POUT_AVG:
+		if (data->id != max34446)
+			return -ENXIO;
+		ret = pmbus_read_word_data(client, page, phase,
+					   MAX34446_MFR_POUT_AVG);
+		break;
+	case PMBUS_VIRT_READ_POUT_MAX:
+		if (data->id != max34446)
+			return -ENXIO;
+		ret = pmbus_read_word_data(client, page, phase,
+					   MAX34446_MFR_POUT_PEAK);
+		break;
+	case PMBUS_VIRT_READ_TEMP_AVG:
+		if (data->id != max34446 && data->id != max34460 &&
+		    data->id != max34461)
+			return -ENXIO;
+		ret = pmbus_read_word_data(client, page, phase,
+					   MAX34446_MFR_TEMPERATURE_AVG);
+		break;
+	case PMBUS_VIRT_READ_TEMP_MAX:
+		ret = pmbus_read_word_data(client, page, phase,
+					   MAX34440_MFR_TEMPERATURE_PEAK);
+		break;
+	case PMBUS_VIRT_RESET_POUT_HISTORY:
+		if (data->id != max34446)
+			return -ENXIO;
+		ret = 0;
+		break;
+	case PMBUS_VIRT_RESET_VOUT_HISTORY:
+	case PMBUS_VIRT_RESET_IOUT_HISTORY:
+	case PMBUS_VIRT_RESET_TEMP_HISTORY:
+		ret = 0;
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
+static int max34440_write_word_data(struct i2c_client *client, int page,
+				    int reg, u16 word)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	const struct max34440_data *data = to_max34440_data(info);
+	int ret;
+
+	switch (reg) {
+	case PMBUS_IOUT_OC_FAULT_LIMIT:
+		ret = pmbus_write_word_data(client, page, MAX34440_IOUT_OC_FAULT_LIMIT,
+					    word);
+		break;
+	case PMBUS_IOUT_OC_WARN_LIMIT:
+		ret = pmbus_write_word_data(client, page, MAX34440_IOUT_OC_WARN_LIMIT,
+					    word);
+		break;
+	case PMBUS_VIRT_RESET_POUT_HISTORY:
+		ret = pmbus_write_word_data(client, page,
+					    MAX34446_MFR_POUT_PEAK, 0);
+		if (ret)
+			break;
+		ret = pmbus_write_word_data(client, page,
+					    MAX34446_MFR_POUT_AVG, 0);
+		break;
+	case PMBUS_VIRT_RESET_VOUT_HISTORY:
+		ret = pmbus_write_word_data(client, page,
+					    MAX34440_MFR_VOUT_MIN, 0x7fff);
+		if (ret)
+			break;
+		ret = pmbus_write_word_data(client, page,
+					    MAX34440_MFR_VOUT_PEAK, 0);
+		break;
+	case PMBUS_VIRT_RESET_IOUT_HISTORY:
+		ret = pmbus_write_word_data(client, page,
+					    MAX34440_MFR_IOUT_PEAK, 0);
+		if (!ret && (data->id == max34446 || data->id == max34451))
+			ret = pmbus_write_word_data(client, page,
+					MAX34446_MFR_IOUT_AVG, 0);
+
+		break;
+	case PMBUS_VIRT_RESET_TEMP_HISTORY:
+		ret = pmbus_write_word_data(client, page,
+					    MAX34440_MFR_TEMPERATURE_PEAK,
+					    0x8000);
+		if (!ret && data->id == max34446)
+			ret = pmbus_write_word_data(client, page,
+					MAX34446_MFR_TEMPERATURE_AVG, 0);
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
+static int max34440_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+	int ret = 0;
+	int mfg_status;
+
+	if (page >= 0) {
+		ret = pmbus_set_page(client, page, 0xff);
+		if (ret < 0)
+			return ret;
+	}
+
+	switch (reg) {
+	case PMBUS_STATUS_IOUT:
+		mfg_status = pmbus_read_word_data(client, 0, 0xff,
+						  PMBUS_STATUS_MFR_SPECIFIC);
+		if (mfg_status < 0)
+			return mfg_status;
+		if (mfg_status & MAX34440_STATUS_OC_WARN)
+			ret |= PB_IOUT_OC_WARNING;
+		if (mfg_status & MAX34440_STATUS_OC_FAULT)
+			ret |= PB_IOUT_OC_FAULT;
+		break;
+	case PMBUS_STATUS_TEMPERATURE:
+		mfg_status = pmbus_read_word_data(client, 0, 0xff,
+						  PMBUS_STATUS_MFR_SPECIFIC);
+		if (mfg_status < 0)
+			return mfg_status;
+		if (mfg_status & MAX34440_STATUS_OT_WARN)
+			ret |= PB_TEMP_OT_WARNING;
+		if (mfg_status & MAX34440_STATUS_OT_FAULT)
+			ret |= PB_TEMP_OT_FAULT;
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
+static int max34451_set_supported_funcs(struct i2c_client *client,
+					 struct max34440_data *data)
+{
+	/*
+	 * Each of the channel 0-15 can be configured to monitor the following
+	 * functions based on MFR_CHANNEL_CONFIG[5:0]
+	 * 0x10: Sequencing + voltage monitoring (only valid for PAGES 0–11)
+	 * 0x20: Voltage monitoring (no sequencing)
+	 * 0x21: Voltage read only
+	 * 0x22: Current monitoring
+	 * 0x23: Current read only
+	 * 0x30: General-purpose input active low
+	 * 0x34: General-purpose input active high
+	 * 0x00:  Disabled
+	 */
+
+	int page, rv;
+
+	for (page = 0; page < 16; page++) {
+		rv = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page);
+		if (rv < 0)
+			return rv;
+
+		rv = i2c_smbus_read_word_data(client,
+					      MAX34451_MFR_CHANNEL_CONFIG);
+		if (rv < 0)
+			return rv;
+
+		switch (rv & MAX34451_MFR_CHANNEL_CONFIG_SEL_MASK) {
+		case 0x10:
+		case 0x20:
+			data->info.func[page] = PMBUS_HAVE_VOUT |
+				PMBUS_HAVE_STATUS_VOUT;
+			break;
+		case 0x21:
+			data->info.func[page] = PMBUS_HAVE_VOUT;
+			break;
+		case 0x22:
+			data->info.func[page] = PMBUS_HAVE_IOUT |
+				PMBUS_HAVE_STATUS_IOUT;
+			break;
+		case 0x23:
+			data->info.func[page] = PMBUS_HAVE_IOUT;
+			break;
+		default:
+			break;
+		}
+	}
+
+	return 0;
+}
+
+static struct pmbus_driver_info max34440_info[] = {
+	[max34440] = {
+		.pages = 14,
+		.format[PSC_VOLTAGE_IN] = direct,
+		.format[PSC_VOLTAGE_OUT] = direct,
+		.format[PSC_TEMPERATURE] = direct,
+		.format[PSC_CURRENT_OUT] = direct,
+		.m[PSC_VOLTAGE_IN] = 1,
+		.b[PSC_VOLTAGE_IN] = 0,
+		.R[PSC_VOLTAGE_IN] = 3,	    /* R = 0 in datasheet reflects mV */
+		.m[PSC_VOLTAGE_OUT] = 1,
+		.b[PSC_VOLTAGE_OUT] = 0,
+		.R[PSC_VOLTAGE_OUT] = 3,    /* R = 0 in datasheet reflects mV */
+		.m[PSC_CURRENT_OUT] = 1,
+		.b[PSC_CURRENT_OUT] = 0,
+		.R[PSC_CURRENT_OUT] = 3,    /* R = 0 in datasheet reflects mA */
+		.m[PSC_TEMPERATURE] = 1,
+		.b[PSC_TEMPERATURE] = 0,
+		.R[PSC_TEMPERATURE] = 2,
+		.func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[3] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[4] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[5] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[6] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[7] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[8] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[9] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[10] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[11] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[12] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[13] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.read_byte_data = max34440_read_byte_data,
+		.read_word_data = max34440_read_word_data,
+		.write_word_data = max34440_write_word_data,
+	},
+	[max34441] = {
+		.pages = 12,
+		.format[PSC_VOLTAGE_IN] = direct,
+		.format[PSC_VOLTAGE_OUT] = direct,
+		.format[PSC_TEMPERATURE] = direct,
+		.format[PSC_CURRENT_OUT] = direct,
+		.format[PSC_FAN] = direct,
+		.m[PSC_VOLTAGE_IN] = 1,
+		.b[PSC_VOLTAGE_IN] = 0,
+		.R[PSC_VOLTAGE_IN] = 3,
+		.m[PSC_VOLTAGE_OUT] = 1,
+		.b[PSC_VOLTAGE_OUT] = 0,
+		.R[PSC_VOLTAGE_OUT] = 3,
+		.m[PSC_CURRENT_OUT] = 1,
+		.b[PSC_CURRENT_OUT] = 0,
+		.R[PSC_CURRENT_OUT] = 3,
+		.m[PSC_TEMPERATURE] = 1,
+		.b[PSC_TEMPERATURE] = 0,
+		.R[PSC_TEMPERATURE] = 2,
+		.m[PSC_FAN] = 1,
+		.b[PSC_FAN] = 0,
+		.R[PSC_FAN] = 0,
+		.func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[3] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[4] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[5] = PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12,
+		.func[6] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[7] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[8] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[9] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[10] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[11] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.read_byte_data = max34440_read_byte_data,
+		.read_word_data = max34440_read_word_data,
+		.write_word_data = max34440_write_word_data,
+	},
+	[max34446] = {
+		.pages = 7,
+		.format[PSC_VOLTAGE_IN] = direct,
+		.format[PSC_VOLTAGE_OUT] = direct,
+		.format[PSC_TEMPERATURE] = direct,
+		.format[PSC_CURRENT_OUT] = direct,
+		.format[PSC_POWER] = direct,
+		.m[PSC_VOLTAGE_IN] = 1,
+		.b[PSC_VOLTAGE_IN] = 0,
+		.R[PSC_VOLTAGE_IN] = 3,
+		.m[PSC_VOLTAGE_OUT] = 1,
+		.b[PSC_VOLTAGE_OUT] = 0,
+		.R[PSC_VOLTAGE_OUT] = 3,
+		.m[PSC_CURRENT_OUT] = 1,
+		.b[PSC_CURRENT_OUT] = 0,
+		.R[PSC_CURRENT_OUT] = 3,
+		.m[PSC_POWER] = 1,
+		.b[PSC_POWER] = 0,
+		.R[PSC_POWER] = 3,
+		.m[PSC_TEMPERATURE] = 1,
+		.b[PSC_TEMPERATURE] = 0,
+		.R[PSC_TEMPERATURE] = 2,
+		.func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_POUT,
+		.func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_POUT,
+		.func[3] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+		.func[4] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[5] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[6] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.read_byte_data = max34440_read_byte_data,
+		.read_word_data = max34440_read_word_data,
+		.write_word_data = max34440_write_word_data,
+	},
+	[max34451] = {
+		.pages = 21,
+		.format[PSC_VOLTAGE_OUT] = direct,
+		.format[PSC_TEMPERATURE] = direct,
+		.format[PSC_CURRENT_OUT] = direct,
+		.m[PSC_VOLTAGE_OUT] = 1,
+		.b[PSC_VOLTAGE_OUT] = 0,
+		.R[PSC_VOLTAGE_OUT] = 3,
+		.m[PSC_CURRENT_OUT] = 1,
+		.b[PSC_CURRENT_OUT] = 0,
+		.R[PSC_CURRENT_OUT] = 2,
+		.m[PSC_TEMPERATURE] = 1,
+		.b[PSC_TEMPERATURE] = 0,
+		.R[PSC_TEMPERATURE] = 2,
+		/* func 0-15 is set dynamically before probing */
+		.func[16] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[17] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[18] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[19] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[20] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.read_word_data = max34440_read_word_data,
+		.write_word_data = max34440_write_word_data,
+	},
+	[max34460] = {
+		.pages = 18,
+		.format[PSC_VOLTAGE_OUT] = direct,
+		.format[PSC_TEMPERATURE] = direct,
+		.m[PSC_VOLTAGE_OUT] = 1,
+		.b[PSC_VOLTAGE_OUT] = 0,
+		.R[PSC_VOLTAGE_OUT] = 3,
+		.m[PSC_TEMPERATURE] = 1,
+		.b[PSC_TEMPERATURE] = 0,
+		.R[PSC_TEMPERATURE] = 2,
+		.func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[3] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[4] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[5] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[6] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[7] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[8] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[9] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[10] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[11] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[13] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[14] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[15] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[16] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[17] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.read_word_data = max34440_read_word_data,
+		.write_word_data = max34440_write_word_data,
+	},
+	[max34461] = {
+		.pages = 23,
+		.format[PSC_VOLTAGE_OUT] = direct,
+		.format[PSC_TEMPERATURE] = direct,
+		.m[PSC_VOLTAGE_OUT] = 1,
+		.b[PSC_VOLTAGE_OUT] = 0,
+		.R[PSC_VOLTAGE_OUT] = 3,
+		.m[PSC_TEMPERATURE] = 1,
+		.b[PSC_TEMPERATURE] = 0,
+		.R[PSC_TEMPERATURE] = 2,
+		.func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[2] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[3] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[4] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[5] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[6] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[7] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[8] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[9] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[10] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[11] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[12] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[13] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[14] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		.func[15] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT,
+		/* page 16 is reserved */
+		.func[17] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[18] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[19] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[20] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.func[21] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+		.read_word_data = max34440_read_word_data,
+		.write_word_data = max34440_write_word_data,
+	},
+};
+
+static int max34440_probe(struct i2c_client *client)
+{
+	struct max34440_data *data;
+	int rv;
+
+	data = devm_kzalloc(&client->dev, sizeof(struct max34440_data),
+			    GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+	data->id = i2c_match_id(max34440_id, client)->driver_data;
+	data->info = max34440_info[data->id];
+
+	if (data->id == max34451) {
+		rv = max34451_set_supported_funcs(client, data);
+		if (rv)
+			return rv;
+	}
+
+	return pmbus_do_probe(client, &data->info);
+}
+
+static const struct i2c_device_id max34440_id[] = {
+	{"max34440", max34440},
+	{"max34441", max34441},
+	{"max34446", max34446},
+	{"max34451", max34451},
+	{"max34460", max34460},
+	{"max34461", max34461},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, max34440_id);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver max34440_driver = {
+	.driver = {
+		   .name = "max34440",
+		   },
+	.probe_new = max34440_probe,
+	.id_table = max34440_id,
+};
+
+module_i2c_driver(max34440_driver);
+
+MODULE_AUTHOR("Guenter Roeck");
+MODULE_DESCRIPTION("PMBus driver for Maxim MAX34440/MAX34441");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/max8688.c b/drivers/hwmon/pmbus/max8688.c
new file mode 100644
index 000000000..5e66c28c0
--- /dev/null
+++ b/drivers/hwmon/pmbus/max8688.c
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Hardware monitoring driver for Maxim MAX8688
+ *
+ * Copyright (c) 2011 Ericsson AB.
+ */
+
+#include <linux/bitops.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include "pmbus.h"
+
+#define MAX8688_MFR_VOUT_PEAK		0xd4
+#define MAX8688_MFR_IOUT_PEAK		0xd5
+#define MAX8688_MFR_TEMPERATURE_PEAK	0xd6
+#define MAX8688_MFG_STATUS		0xd8
+
+#define MAX8688_STATUS_OC_FAULT		BIT(4)
+#define MAX8688_STATUS_OV_FAULT		BIT(5)
+#define MAX8688_STATUS_OV_WARNING	BIT(8)
+#define MAX8688_STATUS_UV_FAULT		BIT(9)
+#define MAX8688_STATUS_UV_WARNING	BIT(10)
+#define MAX8688_STATUS_UC_FAULT		BIT(11)
+#define MAX8688_STATUS_OC_WARNING	BIT(12)
+#define MAX8688_STATUS_OT_FAULT		BIT(13)
+#define MAX8688_STATUS_OT_WARNING	BIT(14)
+
+static int max8688_read_word_data(struct i2c_client *client, int page,
+				  int phase, int reg)
+{
+	int ret;
+
+	if (page > 0)
+		return -ENXIO;
+
+	switch (reg) {
+	case PMBUS_VIRT_READ_VOUT_MAX:
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   MAX8688_MFR_VOUT_PEAK);
+		break;
+	case PMBUS_VIRT_READ_IOUT_MAX:
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   MAX8688_MFR_IOUT_PEAK);
+		break;
+	case PMBUS_VIRT_READ_TEMP_MAX:
+		ret = pmbus_read_word_data(client, 0, 0xff,
+					   MAX8688_MFR_TEMPERATURE_PEAK);
+		break;
+	case PMBUS_VIRT_RESET_VOUT_HISTORY:
+	case PMBUS_VIRT_RESET_IOUT_HISTORY:
+	case PMBUS_VIRT_RESET_TEMP_HISTORY:
+		ret = 0;
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
+static int max8688_write_word_data(struct i2c_client *client, int page, int reg,
+				   u16 word)
+{
+	int ret;
+
+	switch (reg) {
+	case PMBUS_VIRT_RESET_VOUT_HISTORY:
+		ret = pmbus_write_word_data(client, 0, MAX8688_MFR_VOUT_PEAK,
+					    0);
+		break;
+	case PMBUS_VIRT_RESET_IOUT_HISTORY:
+		ret = pmbus_write_word_data(client, 0, MAX8688_MFR_IOUT_PEAK,
+					    0);
+		break;
+	case PMBUS_VIRT_RESET_TEMP_HISTORY:
+		ret = pmbus_write_word_data(client, 0,
+					    MAX8688_MFR_TEMPERATURE_PEAK,
+					    0xffff);
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
+static int max8688_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+	int ret = 0;
+	int mfg_status;
+
+	if (page > 0)
+		return -ENXIO;
+
+	switch (reg) {
+	case PMBUS_STATUS_VOUT:
+		mfg_status = pmbus_read_word_data(client, 0, 0xff,
+						  MAX8688_MFG_STATUS);
+		if (mfg_status < 0)
+			return mfg_status;
+		if (mfg_status & MAX8688_STATUS_UV_WARNING)
+			ret |= PB_VOLTAGE_UV_WARNING;
+		if (mfg_status & MAX8688_STATUS_UV_FAULT)
+			ret |= PB_VOLTAGE_UV_FAULT;
+		if (mfg_status & MAX8688_STATUS_OV_WARNING)
+			ret |= PB_VOLTAGE_OV_WARNING;
+		if (mfg_status & MAX8688_STATUS_OV_FAULT)
+			ret |= PB_VOLTAGE_OV_FAULT;
+		break;
+	case PMBUS_STATUS_IOUT:
+		mfg_status = pmbus_read_word_data(client, 0, 0xff,
+						  MAX8688_MFG_STATUS);
+		if (mfg_status < 0)
+			return mfg_status;
+		if (mfg_status & MAX8688_STATUS_UC_FAULT)
+			ret |= PB_IOUT_UC_FAULT;
+		if (mfg_status & MAX8688_STATUS_OC_WARNING)
+			ret |= PB_IOUT_OC_WARNING;
+		if (mfg_status & MAX8688_STATUS_OC_FAULT)
+			ret |= PB_IOUT_OC_FAULT;
+		break;
+	case PMBUS_STATUS_TEMPERATURE:
+		mfg_status = pmbus_read_word_data(client, 0, 0xff,
+						  MAX8688_MFG_STATUS);
+		if (mfg_status < 0)
+			return mfg_status;
+		if (mfg_status & MAX8688_STATUS_OT_WARNING)
+			ret |= PB_TEMP_OT_WARNING;
+		if (mfg_status & MAX8688_STATUS_OT_FAULT)
+			ret |= PB_TEMP_OT_FAULT;
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
+static struct pmbus_driver_info max8688_info = {
+	.pages = 1,
+	.format[PSC_VOLTAGE_IN] = direct,
+	.format[PSC_VOLTAGE_OUT] = direct,
+	.format[PSC_TEMPERATURE] = direct,
+	.format[PSC_CURRENT_OUT] = direct,
+	.m[PSC_VOLTAGE_IN] = 19995,
+	.b[PSC_VOLTAGE_IN] = 0,
+	.R[PSC_VOLTAGE_IN] = -1,
+	.m[PSC_VOLTAGE_OUT] = 19995,
+	.b[PSC_VOLTAGE_OUT] = 0,
+	.R[PSC_VOLTAGE_OUT] = -1,
+	.m[PSC_CURRENT_OUT] = 23109,
+	.b[PSC_CURRENT_OUT] = 0,
+	.R[PSC_CURRENT_OUT] = -2,
+	.m[PSC_TEMPERATURE] = -7612,
+	.b[PSC_TEMPERATURE] = 335,
+	.R[PSC_TEMPERATURE] = -3,
+	.func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT | PMBUS_HAVE_TEMP
+		| PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT
+		| PMBUS_HAVE_STATUS_TEMP,
+	.read_byte_data = max8688_read_byte_data,
+	.read_word_data = max8688_read_word_data,
+	.write_word_data = max8688_write_word_data,
+};
+
+static int max8688_probe(struct i2c_client *client)
+{
+	return pmbus_do_probe(client, &max8688_info);
+}
+
+static const struct i2c_device_id max8688_id[] = {
+	{"max8688", 0},
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, max8688_id);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver max8688_driver = {
+	.driver = {
+		   .name = "max8688",
+		   },
+	.probe_new = max8688_probe,
+	.id_table = max8688_id,
+};
+
+module_i2c_driver(max8688_driver);
+
+MODULE_AUTHOR("Guenter Roeck");
+MODULE_DESCRIPTION("PMBus driver for Maxim MAX8688");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/mp2888.c b/drivers/hwmon/pmbus/mp2888.c
new file mode 100644
index 000000000..24e519470
--- /dev/null
+++ b/drivers/hwmon/pmbus/mp2888.c
@@ -0,0 +1,407 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Hardware monitoring driver for MPS Multi-phase Digital VR Controllers
+ *
+ * Copyright (C) 2020 Nvidia Technologies Ltd.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include "pmbus.h"
+
+/* Vendor specific registers. */
+#define MP2888_MFR_SYS_CONFIG	0x44
+#define MP2888_MFR_READ_CS1_2	0x73
+#define MP2888_MFR_READ_CS3_4	0x74
+#define MP2888_MFR_READ_CS5_6	0x75
+#define MP2888_MFR_READ_CS7_8	0x76
+#define MP2888_MFR_READ_CS9_10	0x77
+#define MP2888_MFR_VR_CONFIG1	0xe1
+
+#define MP2888_TOTAL_CURRENT_RESOLUTION	BIT(3)
+#define MP2888_PHASE_CURRENT_RESOLUTION	BIT(4)
+#define MP2888_DRMOS_KCS		GENMASK(2, 0)
+#define MP2888_TEMP_UNIT		10
+#define MP2888_MAX_PHASE		10
+
+struct mp2888_data {
+	struct pmbus_driver_info info;
+	int total_curr_resolution;
+	int phase_curr_resolution;
+	int curr_sense_gain;
+};
+
+#define to_mp2888_data(x)	container_of(x, struct mp2888_data, info)
+
+static int mp2888_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+	switch (reg) {
+	case PMBUS_VOUT_MODE:
+		/* Enforce VOUT direct format. */
+		return PB_VOUT_MODE_DIRECT;
+	default:
+		return -ENODATA;
+	}
+}
+
+static int
+mp2888_current_sense_gain_and_resolution_get(struct i2c_client *client, struct mp2888_data *data)
+{
+	int ret;
+
+	/*
+	 * Obtain DrMOS current sense gain of power stage from the register
+	 * , bits 0-2. The value is selected as below:
+	 * 00b - 5µA/A, 01b - 8.5µA/A, 10b - 9.7µA/A, 11b - 10µA/A. Other
+	 * values are reserved.
+	 */
+	ret = i2c_smbus_read_word_data(client, MP2888_MFR_SYS_CONFIG);
+	if (ret < 0)
+		return ret;
+
+	switch (ret & MP2888_DRMOS_KCS) {
+	case 0:
+		data->curr_sense_gain = 85;
+		break;
+	case 1:
+		data->curr_sense_gain = 97;
+		break;
+	case 2:
+		data->curr_sense_gain = 100;
+		break;
+	case 3:
+		data->curr_sense_gain = 50;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/*
+	 * Obtain resolution selector for total and phase current report and protection.
+	 * 0: original resolution; 1: half resolution (in such case phase current value should
+	 * be doubled.
+	 */
+	data->total_curr_resolution = (ret & MP2888_TOTAL_CURRENT_RESOLUTION) >> 3;
+	data->phase_curr_resolution = (ret & MP2888_PHASE_CURRENT_RESOLUTION) >> 4;
+
+	return 0;
+}
+
+static int
+mp2888_read_phase(struct i2c_client *client, struct mp2888_data *data, int page, int phase, u8 reg)
+{
+	int ret;
+
+	ret = pmbus_read_word_data(client, page, phase, reg);
+	if (ret < 0)
+		return ret;
+
+	if (!((phase + 1) % 2))
+		ret >>= 8;
+	ret &= 0xff;
+
+	/*
+	 * Output value is calculated as: (READ_CSx / 80 – 1.23) / (Kcs * Rcs)
+	 * where:
+	 * - Kcs is the DrMOS current sense gain of power stage, which is obtained from the
+	 *   register MP2888_MFR_VR_CONFIG1, bits 13-12 with the following selection of DrMOS
+	 *   (data->curr_sense_gain):
+	 *   00b - 8.5µA/A, 01b - 9.7µA/A, 1b - 10µA/A, 11b - 5µA/A.
+	 * - Rcs is the internal phase current sense resistor. This parameter depends on hardware
+	 *   assembly. By default it is set to 1kΩ. In case of different assembly, user should
+	 *   scale this parameter by dividing it by Rcs.
+	 * If phase current resolution bit is set to 1, READ_CSx value should be doubled.
+	 * Note, that current phase sensing, providing by the device is not accurate. This is
+	 * because sampling of current occurrence of bit weight has a big deviation, especially for
+	 * light load.
+	 */
+	ret = DIV_ROUND_CLOSEST(ret * 200 - 19600, data->curr_sense_gain);
+	/* Scale according to total current resolution. */
+	ret = (data->total_curr_resolution) ? ret * 2 : ret;
+	return ret;
+}
+
+static int
+mp2888_read_phases(struct i2c_client *client, struct mp2888_data *data, int page, int phase)
+{
+	int ret;
+
+	switch (phase) {
+	case 0 ... 1:
+		ret = mp2888_read_phase(client, data, page, phase, MP2888_MFR_READ_CS1_2);
+		break;
+	case 2 ... 3:
+		ret = mp2888_read_phase(client, data, page, phase, MP2888_MFR_READ_CS3_4);
+		break;
+	case 4 ... 5:
+		ret = mp2888_read_phase(client, data, page, phase, MP2888_MFR_READ_CS5_6);
+		break;
+	case 6 ... 7:
+		ret = mp2888_read_phase(client, data, page, phase, MP2888_MFR_READ_CS7_8);
+		break;
+	case 8 ... 9:
+		ret = mp2888_read_phase(client, data, page, phase, MP2888_MFR_READ_CS9_10);
+		break;
+	default:
+		return -ENODATA;
+	}
+	return ret;
+}
+
+static int mp2888_read_word_data(struct i2c_client *client, int page, int phase, int reg)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	struct mp2888_data *data = to_mp2888_data(info);
+	int ret;
+
+	switch (reg) {
+	case PMBUS_READ_VIN:
+		ret = pmbus_read_word_data(client, page, phase, reg);
+		if (ret <= 0)
+			return ret;
+
+		/*
+		 * READ_VIN requires fixup to scale it to linear11 format. Register data format
+		 * provides 10 bits for mantissa and 6 bits for exponent. Bits 15:10 are set with
+		 * the fixed value 111011b.
+		 */
+		ret = (ret & GENMASK(9, 0)) | ((ret & GENMASK(31, 10)) << 1);
+		break;
+	case PMBUS_OT_WARN_LIMIT:
+		ret = pmbus_read_word_data(client, page, phase, reg);
+		if (ret < 0)
+			return ret;
+		/*
+		 * Chip reports limits in degrees C, but the actual temperature in 10th of
+		 * degrees C - scaling is needed to match both.
+		 */
+		ret *= MP2888_TEMP_UNIT;
+		break;
+	case PMBUS_READ_IOUT:
+		if (phase != 0xff)
+			return mp2888_read_phases(client, data, page, phase);
+
+		ret = pmbus_read_word_data(client, page, phase, reg);
+		if (ret < 0)
+			return ret;
+		/*
+		 * READ_IOUT register has unused bits 15:12 with fixed value 1110b. Clear these
+		 * bits and scale with total current resolution. Data is provided in direct format.
+		 */
+		ret &= GENMASK(11, 0);
+		ret = data->total_curr_resolution ? ret * 2 : ret;
+		break;
+	case PMBUS_IOUT_OC_WARN_LIMIT:
+		ret = pmbus_read_word_data(client, page, phase, reg);
+		if (ret < 0)
+			return ret;
+		ret &= GENMASK(9, 0);
+		/*
+		 * Chip reports limits with resolution 1A or 2A, if total current resolution bit is
+		 * set 1. Actual current is reported with 0.25A or respectively 0.5A resolution.
+		 * Scaling is needed to match both.
+		 */
+		ret = data->total_curr_resolution ? ret * 8 : ret * 4;
+		break;
+	case PMBUS_READ_POUT:
+	case PMBUS_READ_PIN:
+		ret = pmbus_read_word_data(client, page, phase, reg);
+		if (ret < 0)
+			return ret;
+		ret = data->total_curr_resolution ? ret : DIV_ROUND_CLOSEST(ret, 2);
+		break;
+	case PMBUS_POUT_OP_WARN_LIMIT:
+		ret = pmbus_read_word_data(client, page, phase, reg);
+		if (ret < 0)
+			return ret;
+		/*
+		 * Chip reports limits with resolution 1W or 2W, if total current resolution bit is
+		 * set 1. Actual power is reported with 0.5W or 1W respectively resolution. Scaling
+		 * is needed to match both.
+		 */
+		ret = data->total_curr_resolution ? ret * 2 : ret;
+		break;
+	/*
+	 * The below registers are not implemented by device or implemented not according to the
+	 * spec. Skip all of them to avoid exposing non-relevant inputs to sysfs.
+	 */
+	case PMBUS_OT_FAULT_LIMIT:
+	case PMBUS_UT_WARN_LIMIT:
+	case PMBUS_UT_FAULT_LIMIT:
+	case PMBUS_VIN_UV_FAULT_LIMIT:
+	case PMBUS_VOUT_UV_WARN_LIMIT:
+	case PMBUS_VOUT_OV_WARN_LIMIT:
+	case PMBUS_VOUT_UV_FAULT_LIMIT:
+	case PMBUS_VOUT_OV_FAULT_LIMIT:
+	case PMBUS_VIN_OV_WARN_LIMIT:
+	case PMBUS_IOUT_OC_LV_FAULT_LIMIT:
+	case PMBUS_IOUT_OC_FAULT_LIMIT:
+	case PMBUS_POUT_MAX:
+	case PMBUS_IOUT_UC_FAULT_LIMIT:
+	case PMBUS_POUT_OP_FAULT_LIMIT:
+	case PMBUS_PIN_OP_WARN_LIMIT:
+	case PMBUS_MFR_VIN_MIN:
+	case PMBUS_MFR_VOUT_MIN:
+	case PMBUS_MFR_VIN_MAX:
+	case PMBUS_MFR_VOUT_MAX:
+	case PMBUS_MFR_IIN_MAX:
+	case PMBUS_MFR_IOUT_MAX:
+	case PMBUS_MFR_PIN_MAX:
+	case PMBUS_MFR_POUT_MAX:
+	case PMBUS_MFR_MAX_TEMP_1:
+		return -ENXIO;
+	default:
+		return -ENODATA;
+	}
+
+	return ret;
+}
+
+static int mp2888_write_word_data(struct i2c_client *client, int page, int reg, u16 word)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	struct mp2888_data *data = to_mp2888_data(info);
+
+	switch (reg) {
+	case PMBUS_OT_WARN_LIMIT:
+		word = DIV_ROUND_CLOSEST(word, MP2888_TEMP_UNIT);
+		/* Drop unused bits 15:8. */
+		word = clamp_val(word, 0, GENMASK(7, 0));
+		break;
+	case PMBUS_IOUT_OC_WARN_LIMIT:
+		/* Fix limit according to total curent resolution. */
+		word = data->total_curr_resolution ? DIV_ROUND_CLOSEST(word, 8) :
+		       DIV_ROUND_CLOSEST(word, 4);
+		/* Drop unused bits 15:10. */
+		word = clamp_val(word, 0, GENMASK(9, 0));
+		break;
+	case PMBUS_POUT_OP_WARN_LIMIT:
+		/* Fix limit according to total curent resolution. */
+		word = data->total_curr_resolution ? DIV_ROUND_CLOSEST(word, 4) :
+		       DIV_ROUND_CLOSEST(word, 2);
+		/* Drop unused bits 15:10. */
+		word = clamp_val(word, 0, GENMASK(9, 0));
+		break;
+	default:
+		return -ENODATA;
+	}
+	return pmbus_write_word_data(client, page, reg, word);
+}
+
+static int
+mp2888_identify_multiphase(struct i2c_client *client, struct mp2888_data *data,
+			   struct pmbus_driver_info *info)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, 0);
+	if (ret < 0)
+		return ret;
+
+	/* Identify multiphase number - could be from 1 to 10. */
+	ret = i2c_smbus_read_word_data(client, MP2888_MFR_VR_CONFIG1);
+	if (ret <= 0)
+		return ret;
+
+	info->phases[0] = ret & GENMASK(3, 0);
+
+	/*
+	 * The device provides a total of 10 PWM pins, and can be configured to different phase
+	 * count applications for rail.
+	 */
+	if (info->phases[0] > MP2888_MAX_PHASE)
+		return -EINVAL;
+
+	return 0;
+}
+
+static struct pmbus_driver_info mp2888_info = {
+	.pages = 1,
+	.format[PSC_VOLTAGE_IN] = linear,
+	.format[PSC_VOLTAGE_OUT] = direct,
+	.format[PSC_TEMPERATURE] = direct,
+	.format[PSC_CURRENT_IN] = linear,
+	.format[PSC_CURRENT_OUT] = direct,
+	.format[PSC_POWER] = direct,
+	.m[PSC_TEMPERATURE] = 1,
+	.R[PSC_TEMPERATURE] = 1,
+	.m[PSC_VOLTAGE_OUT] = 1,
+	.R[PSC_VOLTAGE_OUT] = 3,
+	.m[PSC_CURRENT_OUT] = 4,
+	.m[PSC_POWER] = 1,
+	.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_IOUT |
+		   PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP |
+		   PMBUS_HAVE_POUT | PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT |
+		   PMBUS_PHASE_VIRTUAL,
+	.pfunc[0] = PMBUS_HAVE_IOUT,
+	.pfunc[1] = PMBUS_HAVE_IOUT,
+	.pfunc[2] = PMBUS_HAVE_IOUT,
+	.pfunc[3] = PMBUS_HAVE_IOUT,
+	.pfunc[4] = PMBUS_HAVE_IOUT,
+	.pfunc[5] = PMBUS_HAVE_IOUT,
+	.pfunc[6] = PMBUS_HAVE_IOUT,
+	.pfunc[7] = PMBUS_HAVE_IOUT,
+	.pfunc[8] = PMBUS_HAVE_IOUT,
+	.pfunc[9] = PMBUS_HAVE_IOUT,
+	.read_byte_data = mp2888_read_byte_data,
+	.read_word_data = mp2888_read_word_data,
+	.write_word_data = mp2888_write_word_data,
+};
+
+static int mp2888_probe(struct i2c_client *client)
+{
+	struct pmbus_driver_info *info;
+	struct mp2888_data *data;
+	int ret;
+
+	data = devm_kzalloc(&client->dev, sizeof(struct mp2888_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	memcpy(&data->info, &mp2888_info, sizeof(*info));
+	info = &data->info;
+
+	/* Identify multiphase configuration. */
+	ret = mp2888_identify_multiphase(client, data, info);
+	if (ret)
+		return ret;
+
+	/* Obtain current sense gain of power stage and current resolution. */
+	ret = mp2888_current_sense_gain_and_resolution_get(client, data);
+	if (ret)
+		return ret;
+
+	return pmbus_do_probe(client, info);
+}
+
+static const struct i2c_device_id mp2888_id[] = {
+	{"mp2888", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, mp2888_id);
+
+static const struct of_device_id __maybe_unused mp2888_of_match[] = {
+	{.compatible = "mps,mp2888"},
+	{}
+};
+MODULE_DEVICE_TABLE(of, mp2888_of_match);
+
+static struct i2c_driver mp2888_driver = {
+	.driver = {
+		.name = "mp2888",
+		.of_match_table = of_match_ptr(mp2888_of_match),
+	},
+	.probe_new = mp2888_probe,
+	.id_table = mp2888_id,
+};
+
+module_i2c_driver(mp2888_driver);
+
+MODULE_AUTHOR("Vadim Pasternak <vadimp@nvidia.com>");
+MODULE_DESCRIPTION("PMBus driver for MPS MP2888 device");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/mp2975.c b/drivers/hwmon/pmbus/mp2975.c
new file mode 100644
index 000000000..51986adfb
--- /dev/null
+++ b/drivers/hwmon/pmbus/mp2975.c
@@ -0,0 +1,769 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Hardware monitoring driver for MPS Multi-phase Digital VR Controllers
+ *
+ * Copyright (C) 2020 Nvidia Technologies Ltd.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include "pmbus.h"
+
+/* Vendor specific registers. */
+#define MP2975_MFR_APS_HYS_R2		0x0d
+#define MP2975_MFR_SLOPE_TRIM3		0x1d
+#define MP2975_MFR_VR_MULTI_CONFIG_R1	0x0d
+#define MP2975_MFR_VR_MULTI_CONFIG_R2	0x1d
+#define MP2975_MFR_APS_DECAY_ADV	0x56
+#define MP2975_MFR_DC_LOOP_CTRL		0x59
+#define MP2975_MFR_OCP_UCP_PHASE_SET	0x65
+#define MP2975_MFR_VR_CONFIG1		0x68
+#define MP2975_MFR_READ_CS1_2		0x82
+#define MP2975_MFR_READ_CS3_4		0x83
+#define MP2975_MFR_READ_CS5_6		0x84
+#define MP2975_MFR_READ_CS7_8		0x85
+#define MP2975_MFR_READ_CS9_10		0x86
+#define MP2975_MFR_READ_CS11_12		0x87
+#define MP2975_MFR_READ_IOUT_PK		0x90
+#define MP2975_MFR_READ_POUT_PK		0x91
+#define MP2975_MFR_READ_VREF_R1		0xa1
+#define MP2975_MFR_READ_VREF_R2		0xa3
+#define MP2975_MFR_OVP_TH_SET		0xe5
+#define MP2975_MFR_UVP_SET		0xe6
+
+#define MP2975_VOUT_FORMAT		BIT(15)
+#define MP2975_VID_STEP_SEL_R1		BIT(4)
+#define MP2975_IMVP9_EN_R1		BIT(13)
+#define MP2975_VID_STEP_SEL_R2		BIT(3)
+#define MP2975_IMVP9_EN_R2		BIT(12)
+#define MP2975_PRT_THRES_DIV_OV_EN	BIT(14)
+#define MP2975_DRMOS_KCS		GENMASK(13, 12)
+#define MP2975_PROT_DEV_OV_OFF		10
+#define MP2975_PROT_DEV_OV_ON		5
+#define MP2975_SENSE_AMPL		BIT(11)
+#define MP2975_SENSE_AMPL_UNIT		1
+#define MP2975_SENSE_AMPL_HALF		2
+#define MP2975_VIN_UV_LIMIT_UNIT	8
+
+#define MP2975_MAX_PHASE_RAIL1	8
+#define MP2975_MAX_PHASE_RAIL2	4
+#define MP2975_PAGE_NUM		2
+
+#define MP2975_RAIL2_FUNC	(PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | \
+				 PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | \
+				 PMBUS_HAVE_POUT | PMBUS_PHASE_VIRTUAL)
+
+struct mp2975_data {
+	struct pmbus_driver_info info;
+	int vout_scale;
+	int vid_step[MP2975_PAGE_NUM];
+	int vref[MP2975_PAGE_NUM];
+	int vref_off[MP2975_PAGE_NUM];
+	int vout_max[MP2975_PAGE_NUM];
+	int vout_ov_fixed[MP2975_PAGE_NUM];
+	int vout_format[MP2975_PAGE_NUM];
+	int curr_sense_gain[MP2975_PAGE_NUM];
+};
+
+#define to_mp2975_data(x)  container_of(x, struct mp2975_data, info)
+
+static int mp2975_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+	switch (reg) {
+	case PMBUS_VOUT_MODE:
+		/*
+		 * Enforce VOUT direct format, since device allows to set the
+		 * different formats for the different rails. Conversion from
+		 * VID to direct provided by driver internally, in case it is
+		 * necessary.
+		 */
+		return PB_VOUT_MODE_DIRECT;
+	default:
+		return -ENODATA;
+	}
+}
+
+static int
+mp2975_read_word_helper(struct i2c_client *client, int page, int phase, u8 reg,
+			u16 mask)
+{
+	int ret = pmbus_read_word_data(client, page, phase, reg);
+
+	return (ret > 0) ? ret & mask : ret;
+}
+
+static int
+mp2975_vid2direct(int vrf, int val)
+{
+	switch (vrf) {
+	case vr12:
+		if (val >= 0x01)
+			return 250 + (val - 1) * 5;
+		break;
+	case vr13:
+		if (val >= 0x01)
+			return 500 + (val - 1) * 10;
+		break;
+	case imvp9:
+		if (val >= 0x01)
+			return 200 + (val - 1) * 10;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int
+mp2975_read_phase(struct i2c_client *client, struct mp2975_data *data,
+		  int page, int phase, u8 reg)
+{
+	int ph_curr, ret;
+
+	ret = pmbus_read_word_data(client, page, phase, reg);
+	if (ret < 0)
+		return ret;
+
+	if (!((phase + 1) % MP2975_PAGE_NUM))
+		ret >>= 8;
+	ret &= 0xff;
+
+	/*
+	 * Output value is calculated as: (READ_CSx / 80 – 1.23) / (Kcs * Rcs)
+	 * where:
+	 * - Kcs is the DrMOS current sense gain of power stage, which is
+	 *   obtained from the register MP2975_MFR_VR_CONFIG1, bits 13-12 with
+	 *   the following selection of DrMOS (data->curr_sense_gain[page]):
+	 *   00b - 5µA/A, 01b - 8.5µA/A, 10b - 9.7µA/A, 11b - 10µA/A.
+	 * - Rcs is the internal phase current sense resistor which is constant
+	 *   value 1kΩ.
+	 */
+	ph_curr = ret * 100 - 9800;
+
+	/*
+	 * Current phase sensing, providing by the device is not accurate
+	 * for the light load. This because sampling of current occurrence of
+	 * bit weight has a big deviation for light load. For handling such
+	 * case phase current is represented as the maximum between the value
+	 * calculated  above and total rail current divided by number phases.
+	 */
+	ret = pmbus_read_word_data(client, page, phase, PMBUS_READ_IOUT);
+	if (ret < 0)
+		return ret;
+
+	return max_t(int, DIV_ROUND_CLOSEST(ret, data->info.phases[page]),
+		     DIV_ROUND_CLOSEST(ph_curr, data->curr_sense_gain[page]));
+}
+
+static int
+mp2975_read_phases(struct i2c_client *client, struct mp2975_data *data,
+		   int page, int phase)
+{
+	int ret;
+
+	if (page) {
+		switch (phase) {
+		case 0 ... 1:
+			ret = mp2975_read_phase(client, data, page, phase,
+						MP2975_MFR_READ_CS7_8);
+			break;
+		case 2 ... 3:
+			ret = mp2975_read_phase(client, data, page, phase,
+						MP2975_MFR_READ_CS9_10);
+			break;
+		case 4 ... 5:
+			ret = mp2975_read_phase(client, data, page, phase,
+						MP2975_MFR_READ_CS11_12);
+			break;
+		default:
+			return -ENODATA;
+		}
+	} else {
+		switch (phase) {
+		case 0 ... 1:
+			ret = mp2975_read_phase(client, data, page, phase,
+						MP2975_MFR_READ_CS1_2);
+			break;
+		case 2 ... 3:
+			ret = mp2975_read_phase(client, data, page, phase,
+						MP2975_MFR_READ_CS3_4);
+			break;
+		case 4 ... 5:
+			ret = mp2975_read_phase(client, data, page, phase,
+						MP2975_MFR_READ_CS5_6);
+			break;
+		case 6 ... 7:
+			ret = mp2975_read_phase(client, data, page, phase,
+						MP2975_MFR_READ_CS7_8);
+			break;
+		case 8 ... 9:
+			ret = mp2975_read_phase(client, data, page, phase,
+						MP2975_MFR_READ_CS9_10);
+			break;
+		case 10 ... 11:
+			ret = mp2975_read_phase(client, data, page, phase,
+						MP2975_MFR_READ_CS11_12);
+			break;
+		default:
+			return -ENODATA;
+		}
+	}
+	return ret;
+}
+
+static int mp2975_read_word_data(struct i2c_client *client, int page,
+				 int phase, int reg)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	struct mp2975_data *data = to_mp2975_data(info);
+	int ret;
+
+	switch (reg) {
+	case PMBUS_OT_FAULT_LIMIT:
+		ret = mp2975_read_word_helper(client, page, phase, reg,
+					      GENMASK(7, 0));
+		break;
+	case PMBUS_VIN_OV_FAULT_LIMIT:
+		ret = mp2975_read_word_helper(client, page, phase, reg,
+					      GENMASK(7, 0));
+		if (ret < 0)
+			return ret;
+
+		ret = DIV_ROUND_CLOSEST(ret, MP2975_VIN_UV_LIMIT_UNIT);
+		break;
+	case PMBUS_VOUT_OV_FAULT_LIMIT:
+		/*
+		 * Register provides two values for over-voltage protection
+		 * threshold for fixed (ovp2) and tracking (ovp1) modes. The
+		 * minimum of these two values is provided as over-voltage
+		 * fault alarm.
+		 */
+		ret = mp2975_read_word_helper(client, page, phase,
+					      MP2975_MFR_OVP_TH_SET,
+					      GENMASK(2, 0));
+		if (ret < 0)
+			return ret;
+
+		ret = min_t(int, data->vout_max[page] + 50 * (ret + 1),
+			    data->vout_ov_fixed[page]);
+		break;
+	case PMBUS_VOUT_UV_FAULT_LIMIT:
+		ret = mp2975_read_word_helper(client, page, phase,
+					      MP2975_MFR_UVP_SET,
+					      GENMASK(2, 0));
+		if (ret < 0)
+			return ret;
+
+		ret = DIV_ROUND_CLOSEST(data->vref[page] * 10 - 50 *
+					(ret + 1) * data->vout_scale, 10);
+		break;
+	case PMBUS_READ_VOUT:
+		ret = mp2975_read_word_helper(client, page, phase, reg,
+					      GENMASK(11, 0));
+		if (ret < 0)
+			return ret;
+
+		/*
+		 * READ_VOUT can be provided in VID or direct format. The
+		 * format type is specified by bit 15 of the register
+		 * MP2975_MFR_DC_LOOP_CTRL. The driver enforces VOUT direct
+		 * format, since device allows to set the different formats for
+		 * the different rails and also all VOUT limits registers are
+		 * provided in a direct format. In case format is VID - convert
+		 * to direct.
+		 */
+		if (data->vout_format[page] == vid)
+			ret = mp2975_vid2direct(info->vrm_version[page], ret);
+		break;
+	case PMBUS_VIRT_READ_POUT_MAX:
+		ret = mp2975_read_word_helper(client, page, phase,
+					      MP2975_MFR_READ_POUT_PK,
+					      GENMASK(12, 0));
+		if (ret < 0)
+			return ret;
+
+		ret = DIV_ROUND_CLOSEST(ret, 4);
+		break;
+	case PMBUS_VIRT_READ_IOUT_MAX:
+		ret = mp2975_read_word_helper(client, page, phase,
+					      MP2975_MFR_READ_IOUT_PK,
+					      GENMASK(12, 0));
+		if (ret < 0)
+			return ret;
+
+		ret = DIV_ROUND_CLOSEST(ret, 4);
+		break;
+	case PMBUS_READ_IOUT:
+		ret = mp2975_read_phases(client, data, page, phase);
+		if (ret < 0)
+			return ret;
+
+		break;
+	case PMBUS_UT_WARN_LIMIT:
+	case PMBUS_UT_FAULT_LIMIT:
+	case PMBUS_VIN_UV_WARN_LIMIT:
+	case PMBUS_VIN_UV_FAULT_LIMIT:
+	case PMBUS_VOUT_UV_WARN_LIMIT:
+	case PMBUS_VOUT_OV_WARN_LIMIT:
+	case PMBUS_VIN_OV_WARN_LIMIT:
+	case PMBUS_IIN_OC_FAULT_LIMIT:
+	case PMBUS_IOUT_OC_LV_FAULT_LIMIT:
+	case PMBUS_IIN_OC_WARN_LIMIT:
+	case PMBUS_IOUT_OC_WARN_LIMIT:
+	case PMBUS_IOUT_OC_FAULT_LIMIT:
+	case PMBUS_IOUT_UC_FAULT_LIMIT:
+	case PMBUS_POUT_OP_FAULT_LIMIT:
+	case PMBUS_POUT_OP_WARN_LIMIT:
+	case PMBUS_PIN_OP_WARN_LIMIT:
+		return -ENXIO;
+	default:
+		return -ENODATA;
+	}
+
+	return ret;
+}
+
+static int mp2975_identify_multiphase_rail2(struct i2c_client *client)
+{
+	int ret;
+
+	/*
+	 * Identify multiphase for rail 2 - could be from 0 to 4.
+	 * In case phase number is zero – only page zero is supported
+	 */
+	ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, 2);
+	if (ret < 0)
+		return ret;
+
+	/* Identify multiphase for rail 2 - could be from 0 to 4. */
+	ret = i2c_smbus_read_word_data(client, MP2975_MFR_VR_MULTI_CONFIG_R2);
+	if (ret < 0)
+		return ret;
+
+	ret &= GENMASK(2, 0);
+	return (ret >= 4) ? 4 : ret;
+}
+
+static void mp2975_set_phase_rail1(struct pmbus_driver_info *info)
+{
+	int i;
+
+	for (i = 0 ; i < info->phases[0]; i++)
+		info->pfunc[i] = PMBUS_HAVE_IOUT;
+}
+
+static void
+mp2975_set_phase_rail2(struct pmbus_driver_info *info, int num_phases)
+{
+	int i;
+
+	/* Set phases for rail 2 from upper to lower. */
+	for (i = 1; i <= num_phases; i++)
+		info->pfunc[MP2975_MAX_PHASE_RAIL1 - i] = PMBUS_HAVE_IOUT;
+}
+
+static int
+mp2975_identify_multiphase(struct i2c_client *client, struct mp2975_data *data,
+			   struct pmbus_driver_info *info)
+{
+	int num_phases2, ret;
+
+	ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, 2);
+	if (ret < 0)
+		return ret;
+
+	/* Identify multiphase for rail 1 - could be from 1 to 8. */
+	ret = i2c_smbus_read_word_data(client, MP2975_MFR_VR_MULTI_CONFIG_R1);
+	if (ret <= 0)
+		return ret;
+
+	info->phases[0] = ret & GENMASK(3, 0);
+
+	/*
+	 * The device provides a total of 8 PWM pins, and can be configured
+	 * to different phase count applications for rail 1 and rail 2.
+	 * Rail 1 can be set to 8 phases, while rail 2 can only be set to 4
+	 * phases at most. When rail 1’s phase count is configured as 0, rail
+	 * 1 operates with 1-phase DCM. When rail 2 phase count is configured
+	 * as 0, rail 2 is disabled.
+	 */
+	if (info->phases[0] > MP2975_MAX_PHASE_RAIL1)
+		return -EINVAL;
+
+	mp2975_set_phase_rail1(info);
+	num_phases2 = min(MP2975_MAX_PHASE_RAIL1 - info->phases[0],
+			  MP2975_MAX_PHASE_RAIL2);
+	if (info->phases[1] && info->phases[1] <= num_phases2)
+		mp2975_set_phase_rail2(info, num_phases2);
+
+	return 0;
+}
+
+static int
+mp2975_identify_vid(struct i2c_client *client, struct mp2975_data *data,
+		    struct pmbus_driver_info *info, u32 reg, int page,
+		    u32 imvp_bit, u32 vr_bit)
+{
+	int ret;
+
+	/* Identify VID mode and step selection. */
+	ret = i2c_smbus_read_word_data(client, reg);
+	if (ret < 0)
+		return ret;
+
+	if (ret & imvp_bit) {
+		info->vrm_version[page] = imvp9;
+		data->vid_step[page] = MP2975_PROT_DEV_OV_OFF;
+	} else if (ret & vr_bit) {
+		info->vrm_version[page] = vr12;
+		data->vid_step[page] = MP2975_PROT_DEV_OV_ON;
+	} else {
+		info->vrm_version[page] = vr13;
+		data->vid_step[page] = MP2975_PROT_DEV_OV_OFF;
+	}
+
+	return 0;
+}
+
+static int
+mp2975_identify_rails_vid(struct i2c_client *client, struct mp2975_data *data,
+			  struct pmbus_driver_info *info)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, 2);
+	if (ret < 0)
+		return ret;
+
+	/* Identify VID mode for rail 1. */
+	ret = mp2975_identify_vid(client, data, info,
+				  MP2975_MFR_VR_MULTI_CONFIG_R1, 0,
+				  MP2975_IMVP9_EN_R1, MP2975_VID_STEP_SEL_R1);
+	if (ret < 0)
+		return ret;
+
+	/* Identify VID mode for rail 2, if connected. */
+	if (info->phases[1])
+		ret = mp2975_identify_vid(client, data, info,
+					  MP2975_MFR_VR_MULTI_CONFIG_R2, 1,
+					  MP2975_IMVP9_EN_R2,
+					  MP2975_VID_STEP_SEL_R2);
+	return ret;
+}
+
+static int
+mp2975_current_sense_gain_get(struct i2c_client *client,
+			      struct mp2975_data *data)
+{
+	int i, ret;
+
+	/*
+	 * Obtain DrMOS current sense gain of power stage from the register
+	 * MP2975_MFR_VR_CONFIG1, bits 13-12. The value is selected as below:
+	 * 00b - 5µA/A, 01b - 8.5µA/A, 10b - 9.7µA/A, 11b - 10µA/A. Other
+	 * values are invalid.
+	 */
+	for (i = 0 ; i < data->info.pages; i++) {
+		ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, i);
+		if (ret < 0)
+			return ret;
+		ret = i2c_smbus_read_word_data(client,
+					       MP2975_MFR_VR_CONFIG1);
+		if (ret < 0)
+			return ret;
+
+		switch ((ret & MP2975_DRMOS_KCS) >> 12) {
+		case 0:
+			data->curr_sense_gain[i] = 50;
+			break;
+		case 1:
+			data->curr_sense_gain[i] = 85;
+			break;
+		case 2:
+			data->curr_sense_gain[i] = 97;
+			break;
+		default:
+			data->curr_sense_gain[i] = 100;
+			break;
+		}
+	}
+
+	return 0;
+}
+
+static int
+mp2975_vref_get(struct i2c_client *client, struct mp2975_data *data,
+		struct pmbus_driver_info *info)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, 3);
+	if (ret < 0)
+		return ret;
+
+	/* Get voltage reference value for rail 1. */
+	ret = i2c_smbus_read_word_data(client, MP2975_MFR_READ_VREF_R1);
+	if (ret < 0)
+		return ret;
+
+	data->vref[0] = ret * data->vid_step[0];
+
+	/* Get voltage reference value for rail 2, if connected. */
+	if (data->info.pages == MP2975_PAGE_NUM) {
+		ret = i2c_smbus_read_word_data(client, MP2975_MFR_READ_VREF_R2);
+		if (ret < 0)
+			return ret;
+
+		data->vref[1] = ret * data->vid_step[1];
+	}
+	return 0;
+}
+
+static int
+mp2975_vref_offset_get(struct i2c_client *client, struct mp2975_data *data,
+		       int page)
+{
+	int ret;
+
+	ret = i2c_smbus_read_word_data(client, MP2975_MFR_OVP_TH_SET);
+	if (ret < 0)
+		return ret;
+
+	switch ((ret & GENMASK(5, 3)) >> 3) {
+	case 1:
+		data->vref_off[page] = 140;
+		break;
+	case 2:
+		data->vref_off[page] = 220;
+		break;
+	case 4:
+		data->vref_off[page] = 400;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static int
+mp2975_vout_max_get(struct i2c_client *client, struct mp2975_data *data,
+		    struct pmbus_driver_info *info, int page)
+{
+	int ret;
+
+	/* Get maximum reference voltage of VID-DAC in VID format. */
+	ret = i2c_smbus_read_word_data(client, PMBUS_VOUT_MAX);
+	if (ret < 0)
+		return ret;
+
+	data->vout_max[page] = mp2975_vid2direct(info->vrm_version[page], ret &
+						 GENMASK(8, 0));
+	return 0;
+}
+
+static int
+mp2975_identify_vout_format(struct i2c_client *client,
+			    struct mp2975_data *data, int page)
+{
+	int ret;
+
+	ret = i2c_smbus_read_word_data(client, MP2975_MFR_DC_LOOP_CTRL);
+	if (ret < 0)
+		return ret;
+
+	if (ret & MP2975_VOUT_FORMAT)
+		data->vout_format[page] = vid;
+	else
+		data->vout_format[page] = direct;
+	return 0;
+}
+
+static int
+mp2975_vout_ov_scale_get(struct i2c_client *client, struct mp2975_data *data,
+			 struct pmbus_driver_info *info)
+{
+	int thres_dev, sense_ampl, ret;
+
+	ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, 0);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Get divider for over- and under-voltage protection thresholds
+	 * configuration from the Advanced Options of Auto Phase Shedding and
+	 * decay register.
+	 */
+	ret = i2c_smbus_read_word_data(client, MP2975_MFR_APS_DECAY_ADV);
+	if (ret < 0)
+		return ret;
+	thres_dev = ret & MP2975_PRT_THRES_DIV_OV_EN ? MP2975_PROT_DEV_OV_ON :
+	                                               MP2975_PROT_DEV_OV_OFF;
+
+	/* Select the gain of remote sense amplifier. */
+	ret = i2c_smbus_read_word_data(client, PMBUS_VOUT_SCALE_LOOP);
+	if (ret < 0)
+		return ret;
+	sense_ampl = ret & MP2975_SENSE_AMPL ? MP2975_SENSE_AMPL_HALF :
+					       MP2975_SENSE_AMPL_UNIT;
+
+	data->vout_scale = sense_ampl * thres_dev;
+
+	return 0;
+}
+
+static int
+mp2975_vout_per_rail_config_get(struct i2c_client *client,
+				struct mp2975_data *data,
+				struct pmbus_driver_info *info)
+{
+	int i, ret;
+
+	for (i = 0; i < data->info.pages; i++) {
+		ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, i);
+		if (ret < 0)
+			return ret;
+
+		/* Obtain voltage reference offsets. */
+		ret = mp2975_vref_offset_get(client, data, i);
+		if (ret < 0)
+			return ret;
+
+		/* Obtain maximum voltage values. */
+		ret = mp2975_vout_max_get(client, data, info, i);
+		if (ret < 0)
+			return ret;
+
+		/*
+		 * Get VOUT format for READ_VOUT command : VID or direct.
+		 * Pages on same device can be configured with different
+		 * formats.
+		 */
+		ret = mp2975_identify_vout_format(client, data, i);
+		if (ret < 0)
+			return ret;
+
+		/*
+		 * Set over-voltage fixed value. Thresholds are provided as
+		 * fixed value, and tracking value. The minimum of them are
+		 * exposed as over-voltage critical threshold.
+		 */
+		data->vout_ov_fixed[i] = data->vref[i] +
+					 DIV_ROUND_CLOSEST(data->vref_off[i] *
+							   data->vout_scale,
+							   10);
+	}
+
+	return 0;
+}
+
+static struct pmbus_driver_info mp2975_info = {
+	.pages = 1,
+	.format[PSC_VOLTAGE_IN] = linear,
+	.format[PSC_VOLTAGE_OUT] = direct,
+	.format[PSC_TEMPERATURE] = direct,
+	.format[PSC_CURRENT_IN] = linear,
+	.format[PSC_CURRENT_OUT] = direct,
+	.format[PSC_POWER] = direct,
+	.m[PSC_TEMPERATURE] = 1,
+	.m[PSC_VOLTAGE_OUT] = 1,
+	.R[PSC_VOLTAGE_OUT] = 3,
+	.m[PSC_CURRENT_OUT] = 1,
+	.m[PSC_POWER] = 1,
+	.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+		PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+		PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_POUT |
+		PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT | PMBUS_PHASE_VIRTUAL,
+	.read_byte_data = mp2975_read_byte_data,
+	.read_word_data = mp2975_read_word_data,
+};
+
+static int mp2975_probe(struct i2c_client *client)
+{
+	struct pmbus_driver_info *info;
+	struct mp2975_data *data;
+	int ret;
+
+	data = devm_kzalloc(&client->dev, sizeof(struct mp2975_data),
+			    GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	memcpy(&data->info, &mp2975_info, sizeof(*info));
+	info = &data->info;
+
+	/* Identify multiphase configuration for rail 2. */
+	ret = mp2975_identify_multiphase_rail2(client);
+	if (ret < 0)
+		return ret;
+
+	if (ret) {
+		/* Two rails are connected. */
+		data->info.pages = MP2975_PAGE_NUM;
+		data->info.phases[1] = ret;
+		data->info.func[1] = MP2975_RAIL2_FUNC;
+	}
+
+	/* Identify multiphase configuration. */
+	ret = mp2975_identify_multiphase(client, data, info);
+	if (ret)
+		return ret;
+
+	/* Identify VID setting per rail. */
+	ret = mp2975_identify_rails_vid(client, data, info);
+	if (ret < 0)
+		return ret;
+
+	/* Obtain current sense gain of power stage. */
+	ret = mp2975_current_sense_gain_get(client, data);
+	if (ret)
+		return ret;
+
+	/* Obtain voltage reference values. */
+	ret = mp2975_vref_get(client, data, info);
+	if (ret)
+		return ret;
+
+	/* Obtain vout over-voltage scales. */
+	ret = mp2975_vout_ov_scale_get(client, data, info);
+	if (ret < 0)
+		return ret;
+
+	/* Obtain offsets, maximum and format for vout. */
+	ret = mp2975_vout_per_rail_config_get(client, data, info);
+	if (ret)
+		return ret;
+
+	return pmbus_do_probe(client, info);
+}
+
+static const struct i2c_device_id mp2975_id[] = {
+	{"mp2975", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, mp2975_id);
+
+static const struct of_device_id __maybe_unused mp2975_of_match[] = {
+	{.compatible = "mps,mp2975"},
+	{}
+};
+MODULE_DEVICE_TABLE(of, mp2975_of_match);
+
+static struct i2c_driver mp2975_driver = {
+	.driver = {
+		.name = "mp2975",
+		.of_match_table = of_match_ptr(mp2975_of_match),
+	},
+	.probe_new = mp2975_probe,
+	.id_table = mp2975_id,
+};
+
+module_i2c_driver(mp2975_driver);
+
+MODULE_AUTHOR("Vadim Pasternak <vadimp@nvidia.com>");
+MODULE_DESCRIPTION("PMBus driver for MPS MP2975 device");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/mp5023.c b/drivers/hwmon/pmbus/mp5023.c
new file mode 100644
index 000000000..791a06c3c
--- /dev/null
+++ b/drivers/hwmon/pmbus/mp5023.c
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Driver for MPS MP5023 Hot-Swap Controller
+ */
+
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include "pmbus.h"
+
+static struct pmbus_driver_info mp5023_info = {
+	.pages = 1,
+
+	.format[PSC_VOLTAGE_IN] = direct,
+	.format[PSC_VOLTAGE_OUT] = direct,
+	.format[PSC_CURRENT_OUT] = direct,
+	.format[PSC_POWER] = direct,
+	.format[PSC_TEMPERATURE] = direct,
+
+	.m[PSC_VOLTAGE_IN] = 32,
+	.b[PSC_VOLTAGE_IN] = 0,
+	.R[PSC_VOLTAGE_IN] = 0,
+	.m[PSC_VOLTAGE_OUT] = 32,
+	.b[PSC_VOLTAGE_OUT] = 0,
+	.R[PSC_VOLTAGE_OUT] = 0,
+	.m[PSC_CURRENT_OUT] = 16,
+	.b[PSC_CURRENT_OUT] = 0,
+	.R[PSC_CURRENT_OUT] = 0,
+	.m[PSC_POWER] = 1,
+	.b[PSC_POWER] = 0,
+	.R[PSC_POWER] = 0,
+	.m[PSC_TEMPERATURE] = 2,
+	.b[PSC_TEMPERATURE] = 0,
+	.R[PSC_TEMPERATURE] = 0,
+
+	.func[0] =
+		PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_PIN |
+		PMBUS_HAVE_TEMP | PMBUS_HAVE_IOUT |
+		PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP,
+};
+
+static int mp5023_probe(struct i2c_client *client)
+{
+	return pmbus_do_probe(client, &mp5023_info);
+}
+
+static const struct of_device_id __maybe_unused mp5023_of_match[] = {
+	{ .compatible = "mps,mp5023", },
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, mp5023_of_match);
+
+static struct i2c_driver mp5023_driver = {
+	.driver = {
+		   .name = "mp5023",
+		   .of_match_table = of_match_ptr(mp5023_of_match),
+	},
+	.probe_new = mp5023_probe,
+};
+
+module_i2c_driver(mp5023_driver);
+
+MODULE_AUTHOR("Howard Chiu <howard.chiu@quantatw.com>");
+MODULE_DESCRIPTION("PMBus driver for MPS MP5023 HSC");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/pim4328.c b/drivers/hwmon/pmbus/pim4328.c
new file mode 100644
index 000000000..273ff6e57
--- /dev/null
+++ b/drivers/hwmon/pmbus/pim4328.c
@@ -0,0 +1,233 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Hardware monitoring driver for PIM4006, PIM4328 and PIM4820
+ *
+ * Copyright (c) 2021 Flextronics International Sweden AB
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pmbus.h>
+#include <linux/slab.h>
+#include "pmbus.h"
+
+enum chips { pim4006, pim4328, pim4820 };
+
+struct pim4328_data {
+	enum chips id;
+	struct pmbus_driver_info info;
+};
+
+#define to_pim4328_data(x)  container_of(x, struct pim4328_data, info)
+
+/* PIM4006 and PIM4328 */
+#define PIM4328_MFR_READ_VINA		0xd3
+#define PIM4328_MFR_READ_VINB		0xd4
+
+/* PIM4006 */
+#define PIM4328_MFR_READ_IINA		0xd6
+#define PIM4328_MFR_READ_IINB		0xd7
+#define PIM4328_MFR_FET_CHECKSTATUS	0xd9
+
+/* PIM4328 */
+#define PIM4328_MFR_STATUS_BITS		0xd5
+
+/* PIM4820 */
+#define PIM4328_MFR_READ_STATUS		0xd0
+
+static const struct i2c_device_id pim4328_id[] = {
+	{"bmr455", pim4328},
+	{"pim4006", pim4006},
+	{"pim4106", pim4006},
+	{"pim4206", pim4006},
+	{"pim4306", pim4006},
+	{"pim4328", pim4328},
+	{"pim4406", pim4006},
+	{"pim4820", pim4820},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, pim4328_id);
+
+static int pim4328_read_word_data(struct i2c_client *client, int page,
+				  int phase, int reg)
+{
+	int ret;
+
+	if (page > 0)
+		return -ENXIO;
+
+	if (phase == 0xff)
+		return -ENODATA;
+
+	switch (reg) {
+	case PMBUS_READ_VIN:
+		ret = pmbus_read_word_data(client, page, phase,
+					   phase == 0 ? PIM4328_MFR_READ_VINA
+						      : PIM4328_MFR_READ_VINB);
+		break;
+	case PMBUS_READ_IIN:
+		ret = pmbus_read_word_data(client, page, phase,
+					   phase == 0 ? PIM4328_MFR_READ_IINA
+						      : PIM4328_MFR_READ_IINB);
+		break;
+	default:
+		ret = -ENODATA;
+	}
+
+	return ret;
+}
+
+static int pim4328_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	struct pim4328_data *data = to_pim4328_data(info);
+	int ret, status;
+
+	if (page > 0)
+		return -ENXIO;
+
+	switch (reg) {
+	case PMBUS_STATUS_BYTE:
+		ret = pmbus_read_byte_data(client, page, PMBUS_STATUS_BYTE);
+		if (ret < 0)
+			return ret;
+		if (data->id == pim4006) {
+			status = pmbus_read_word_data(client, page, 0xff,
+						      PIM4328_MFR_FET_CHECKSTATUS);
+			if (status < 0)
+				return status;
+			if (status & 0x0630) /* Input UV */
+				ret |= PB_STATUS_VIN_UV;
+		} else if (data->id == pim4328) {
+			status = pmbus_read_byte_data(client, page,
+						      PIM4328_MFR_STATUS_BITS);
+			if (status < 0)
+				return status;
+			if (status & 0x04) /* Input UV */
+				ret |= PB_STATUS_VIN_UV;
+			if (status & 0x40) /* Output UV */
+				ret |= PB_STATUS_NONE_ABOVE;
+		} else if (data->id == pim4820) {
+			status = pmbus_read_byte_data(client, page,
+						      PIM4328_MFR_READ_STATUS);
+			if (status < 0)
+				return status;
+			if (status & 0x05) /* Input OV or OC */
+				ret |= PB_STATUS_NONE_ABOVE;
+			if (status & 0x1a) /* Input UV */
+				ret |= PB_STATUS_VIN_UV;
+			if (status & 0x40) /* OT */
+				ret |= PB_STATUS_TEMPERATURE;
+		}
+		break;
+	default:
+		ret = -ENODATA;
+	}
+
+	return ret;
+}
+
+static int pim4328_probe(struct i2c_client *client)
+{
+	int status;
+	u8 device_id[I2C_SMBUS_BLOCK_MAX + 1];
+	const struct i2c_device_id *mid;
+	struct pim4328_data *data;
+	struct pmbus_driver_info *info;
+	struct pmbus_platform_data *pdata;
+	struct device *dev = &client->dev;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_READ_BYTE_DATA
+				     | I2C_FUNC_SMBUS_BLOCK_DATA))
+		return -ENODEV;
+
+	data = devm_kzalloc(&client->dev, sizeof(struct pim4328_data),
+			    GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	status = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, device_id);
+	if (status < 0) {
+		dev_err(&client->dev, "Failed to read Manufacturer Model\n");
+		return status;
+	}
+	for (mid = pim4328_id; mid->name[0]; mid++) {
+		if (!strncasecmp(mid->name, device_id, strlen(mid->name)))
+			break;
+	}
+	if (!mid->name[0]) {
+		dev_err(&client->dev, "Unsupported device\n");
+		return -ENODEV;
+	}
+
+	if (strcmp(client->name, mid->name))
+		dev_notice(&client->dev,
+			   "Device mismatch: Configured %s, detected %s\n",
+			   client->name, mid->name);
+
+	data->id = mid->driver_data;
+	info = &data->info;
+	info->pages = 1;
+	info->read_byte_data = pim4328_read_byte_data;
+	info->read_word_data = pim4328_read_word_data;
+
+	pdata = devm_kzalloc(dev, sizeof(struct pmbus_platform_data),
+			     GFP_KERNEL);
+	if (!pdata)
+		return -ENOMEM;
+	dev->platform_data = pdata;
+	pdata->flags = PMBUS_NO_CAPABILITY | PMBUS_NO_WRITE_PROTECT;
+
+	switch (data->id) {
+	case pim4006:
+		info->phases[0] = 2;
+		info->func[0] = PMBUS_PHASE_VIRTUAL | PMBUS_HAVE_VIN
+			| PMBUS_HAVE_TEMP | PMBUS_HAVE_IOUT;
+		info->pfunc[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN;
+		info->pfunc[1] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN;
+		break;
+	case pim4328:
+		info->phases[0] = 2;
+		info->func[0] = PMBUS_PHASE_VIRTUAL
+			| PMBUS_HAVE_VCAP | PMBUS_HAVE_VIN
+			| PMBUS_HAVE_TEMP | PMBUS_HAVE_IOUT;
+		info->pfunc[0] = PMBUS_HAVE_VIN;
+		info->pfunc[1] = PMBUS_HAVE_VIN;
+		info->format[PSC_VOLTAGE_IN] = direct;
+		info->format[PSC_TEMPERATURE] = direct;
+		info->format[PSC_CURRENT_OUT] = direct;
+		pdata->flags |= PMBUS_USE_COEFFICIENTS_CMD;
+		break;
+	case pim4820:
+		info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_TEMP
+			| PMBUS_HAVE_IIN;
+		info->format[PSC_VOLTAGE_IN] = direct;
+		info->format[PSC_TEMPERATURE] = direct;
+		info->format[PSC_CURRENT_IN] = direct;
+		pdata->flags |= PMBUS_USE_COEFFICIENTS_CMD;
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	return pmbus_do_probe(client, info);
+}
+
+static struct i2c_driver pim4328_driver = {
+	.driver = {
+		   .name = "pim4328",
+		   },
+	.probe_new = pim4328_probe,
+	.id_table = pim4328_id,
+};
+
+module_i2c_driver(pim4328_driver);
+
+MODULE_AUTHOR("Erik Rosen <erik.rosen@metormote.com>");
+MODULE_DESCRIPTION("PMBus driver for PIM4006, PIM4328, PIM4820 power interface modules");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/pli1209bc.c b/drivers/hwmon/pmbus/pli1209bc.c
new file mode 100644
index 000000000..05b4ee35b
--- /dev/null
+++ b/drivers/hwmon/pmbus/pli1209bc.c
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Hardware monitoring driver for Vicor PLI1209BC Digital Supervisor
+ *
+ * Copyright (c) 2022 9elements GmbH
+ */
+
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/pmbus.h>
+#include <linux/regulator/driver.h>
+#include "pmbus.h"
+
+/*
+ * The capability command is only supported at page 0. Probing the device while
+ * the page register is set to 1 will falsely enable PEC support. Disable
+ * capability probing accordingly, since the PLI1209BC does not have any
+ * additional capabilities.
+ */
+static struct pmbus_platform_data pli1209bc_plat_data = {
+	.flags = PMBUS_NO_CAPABILITY,
+};
+
+static int pli1209bc_read_word_data(struct i2c_client *client, int page,
+				    int phase, int reg)
+{
+	int data;
+
+	switch (reg) {
+	/* PMBUS_READ_POUT uses a direct format with R=0 */
+	case PMBUS_READ_POUT:
+		data = pmbus_read_word_data(client, page, phase, reg);
+		if (data < 0)
+			return data;
+		data = sign_extend32(data, 15) * 10;
+		return clamp_val(data, -32768, 32767) & 0xffff;
+	/*
+	 * PMBUS_READ_VOUT and PMBUS_READ_TEMPERATURE_1 return invalid data
+	 * when the BCM is turned off. Since it is not possible to return
+	 * ENODATA error, return zero instead.
+	 */
+	case PMBUS_READ_VOUT:
+	case PMBUS_READ_TEMPERATURE_1:
+		data = pmbus_read_word_data(client, page, phase,
+					    PMBUS_STATUS_WORD);
+		if (data < 0)
+			return data;
+		if (data & PB_STATUS_POWER_GOOD_N)
+			return 0;
+		return pmbus_read_word_data(client, page, phase, reg);
+	default:
+		return -ENODATA;
+	}
+}
+
+#if IS_ENABLED(CONFIG_SENSORS_PLI1209BC_REGULATOR)
+static const struct regulator_desc pli1209bc_reg_desc = {
+	.name = "vout2",
+	.id = 1,
+	.of_match = of_match_ptr("vout2"),
+	.regulators_node = of_match_ptr("regulators"),
+	.ops = &pmbus_regulator_ops,
+	.type = REGULATOR_VOLTAGE,
+	.owner = THIS_MODULE,
+};
+#endif
+
+static struct pmbus_driver_info pli1209bc_info = {
+	.pages = 2,
+	.format[PSC_VOLTAGE_IN] = direct,
+	.format[PSC_VOLTAGE_OUT] = direct,
+	.format[PSC_CURRENT_IN] = direct,
+	.format[PSC_CURRENT_OUT] = direct,
+	.format[PSC_POWER] = direct,
+	.format[PSC_TEMPERATURE] = direct,
+	.m[PSC_VOLTAGE_IN] = 1,
+	.b[PSC_VOLTAGE_IN] = 0,
+	.R[PSC_VOLTAGE_IN] = 1,
+	.m[PSC_VOLTAGE_OUT] = 1,
+	.b[PSC_VOLTAGE_OUT] = 0,
+	.R[PSC_VOLTAGE_OUT] = 1,
+	.m[PSC_CURRENT_IN] = 1,
+	.b[PSC_CURRENT_IN] = 0,
+	.R[PSC_CURRENT_IN] = 3,
+	.m[PSC_CURRENT_OUT] = 1,
+	.b[PSC_CURRENT_OUT] = 0,
+	.R[PSC_CURRENT_OUT] = 2,
+	.m[PSC_POWER] = 1,
+	.b[PSC_POWER] = 0,
+	.R[PSC_POWER] = 1,
+	.m[PSC_TEMPERATURE] = 1,
+	.b[PSC_TEMPERATURE] = 0,
+	.R[PSC_TEMPERATURE] = 0,
+	/*
+	 * Page 0 sums up all attributes except voltage readings.
+	 * The pli1209 digital supervisor only contains a single BCM, making
+	 * page 0 redundant.
+	 */
+	.func[1] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT
+	    | PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT
+	    | PMBUS_HAVE_PIN | PMBUS_HAVE_POUT
+	    | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP
+	    | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_INPUT,
+	.read_word_data = pli1209bc_read_word_data,
+#if IS_ENABLED(CONFIG_SENSORS_PLI1209BC_REGULATOR)
+	.num_regulators = 1,
+	.reg_desc = &pli1209bc_reg_desc,
+#endif
+};
+
+static int pli1209bc_probe(struct i2c_client *client)
+{
+	client->dev.platform_data = &pli1209bc_plat_data;
+	return pmbus_do_probe(client, &pli1209bc_info);
+}
+
+static const struct i2c_device_id pli1209bc_id[] = {
+	{"pli1209bc", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, pli1209bc_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id pli1209bc_of_match[] = {
+	{ .compatible = "vicor,pli1209bc" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, pli1209bc_of_match);
+#endif
+
+static struct i2c_driver pli1209bc_driver = {
+	.driver = {
+		   .name = "pli1209bc",
+		   .of_match_table = of_match_ptr(pli1209bc_of_match),
+		   },
+	.probe_new = pli1209bc_probe,
+	.id_table = pli1209bc_id,
+};
+
+module_i2c_driver(pli1209bc_driver);
+
+MODULE_AUTHOR("Marcello Sylvester Bauer <sylv@sylv.io>");
+MODULE_DESCRIPTION("PMBus driver for Vicor PLI1209BC");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/pm6764tr.c b/drivers/hwmon/pmbus/pm6764tr.c
new file mode 100644
index 000000000..e0bbc8a30
--- /dev/null
+++ b/drivers/hwmon/pmbus/pm6764tr.c
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Hardware monitoring driver for STMicroelectronics digital controller PM6764TR
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pmbus.h>
+#include "pmbus.h"
+
+#define PM6764TR_PMBUS_READ_VOUT	0xD4
+
+static int pm6764tr_read_word_data(struct i2c_client *client, int page, int phase, int reg)
+{
+	int ret;
+
+	switch (reg) {
+	case PMBUS_VIRT_READ_VMON:
+		ret = pmbus_read_word_data(client, page, phase, PM6764TR_PMBUS_READ_VOUT);
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
+static struct pmbus_driver_info pm6764tr_info = {
+	.pages = 1,
+	.format[PSC_VOLTAGE_IN] = linear,
+	.format[PSC_VOLTAGE_OUT] = vid,
+	.format[PSC_TEMPERATURE] = linear,
+	.format[PSC_CURRENT_OUT] = linear,
+	.format[PSC_POWER] = linear,
+	.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN |  PMBUS_HAVE_PIN |
+	    PMBUS_HAVE_IOUT | PMBUS_HAVE_POUT | PMBUS_HAVE_VMON |
+		PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_VOUT |
+		PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+	.read_word_data = pm6764tr_read_word_data,
+};
+
+static int pm6764tr_probe(struct i2c_client *client)
+{
+	return pmbus_do_probe(client, &pm6764tr_info);
+}
+
+static const struct i2c_device_id pm6764tr_id[] = {
+	{"pm6764tr", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, pm6764tr_id);
+
+static const struct of_device_id __maybe_unused pm6764tr_of_match[] = {
+	{.compatible = "st,pm6764tr"},
+	{}
+};
+
+/* This is the driver that will be inserted */
+static struct i2c_driver pm6764tr_driver = {
+	.driver = {
+		   .name = "pm6764tr",
+		   .of_match_table = of_match_ptr(pm6764tr_of_match),
+		   },
+	.probe_new = pm6764tr_probe,
+	.id_table = pm6764tr_id,
+};
+
+module_i2c_driver(pm6764tr_driver);
+
+MODULE_AUTHOR("Charles Hsu");
+MODULE_DESCRIPTION("PMBus driver for  ST PM6764TR");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/pmbus.c b/drivers/hwmon/pmbus/pmbus.c
new file mode 100644
index 000000000..d0d386990
--- /dev/null
+++ b/drivers/hwmon/pmbus/pmbus.c
@@ -0,0 +1,264 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Hardware monitoring driver for PMBus devices
+ *
+ * Copyright (c) 2010, 2011 Ericsson AB.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/mutex.h>
+#include <linux/i2c.h>
+#include <linux/pmbus.h>
+#include "pmbus.h"
+
+struct pmbus_device_info {
+	int pages;
+	u32 flags;
+};
+
+static const struct i2c_device_id pmbus_id[];
+
+/*
+ * Find sensor groups and status registers on each page.
+ */
+static void pmbus_find_sensor_groups(struct i2c_client *client,
+				     struct pmbus_driver_info *info)
+{
+	int page;
+
+	/* Sensors detected on page 0 only */
+	if (pmbus_check_word_register(client, 0, PMBUS_READ_VIN))
+		info->func[0] |= PMBUS_HAVE_VIN;
+	if (pmbus_check_word_register(client, 0, PMBUS_READ_VCAP))
+		info->func[0] |= PMBUS_HAVE_VCAP;
+	if (pmbus_check_word_register(client, 0, PMBUS_READ_IIN))
+		info->func[0] |= PMBUS_HAVE_IIN;
+	if (pmbus_check_word_register(client, 0, PMBUS_READ_PIN))
+		info->func[0] |= PMBUS_HAVE_PIN;
+	if (info->func[0]
+	    && pmbus_check_byte_register(client, 0, PMBUS_STATUS_INPUT))
+		info->func[0] |= PMBUS_HAVE_STATUS_INPUT;
+	if (pmbus_check_byte_register(client, 0, PMBUS_FAN_CONFIG_12) &&
+	    pmbus_check_word_register(client, 0, PMBUS_READ_FAN_SPEED_1)) {
+		info->func[0] |= PMBUS_HAVE_FAN12;
+		if (pmbus_check_byte_register(client, 0, PMBUS_STATUS_FAN_12))
+			info->func[0] |= PMBUS_HAVE_STATUS_FAN12;
+	}
+	if (pmbus_check_byte_register(client, 0, PMBUS_FAN_CONFIG_34) &&
+	    pmbus_check_word_register(client, 0, PMBUS_READ_FAN_SPEED_3)) {
+		info->func[0] |= PMBUS_HAVE_FAN34;
+		if (pmbus_check_byte_register(client, 0, PMBUS_STATUS_FAN_34))
+			info->func[0] |= PMBUS_HAVE_STATUS_FAN34;
+	}
+	if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_1))
+		info->func[0] |= PMBUS_HAVE_TEMP;
+	if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_2))
+		info->func[0] |= PMBUS_HAVE_TEMP2;
+	if (pmbus_check_word_register(client, 0, PMBUS_READ_TEMPERATURE_3))
+		info->func[0] |= PMBUS_HAVE_TEMP3;
+	if (info->func[0] & (PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2
+			     | PMBUS_HAVE_TEMP3)
+	    && pmbus_check_byte_register(client, 0,
+					 PMBUS_STATUS_TEMPERATURE))
+			info->func[0] |= PMBUS_HAVE_STATUS_TEMP;
+
+	/* Sensors detected on all pages */
+	for (page = 0; page < info->pages; page++) {
+		if (pmbus_check_word_register(client, page, PMBUS_READ_VOUT)) {
+			info->func[page] |= PMBUS_HAVE_VOUT;
+			if (pmbus_check_byte_register(client, page,
+						      PMBUS_STATUS_VOUT))
+				info->func[page] |= PMBUS_HAVE_STATUS_VOUT;
+		}
+		if (pmbus_check_word_register(client, page, PMBUS_READ_IOUT)) {
+			info->func[page] |= PMBUS_HAVE_IOUT;
+			if (pmbus_check_byte_register(client, 0,
+						      PMBUS_STATUS_IOUT))
+				info->func[page] |= PMBUS_HAVE_STATUS_IOUT;
+		}
+		if (pmbus_check_word_register(client, page, PMBUS_READ_POUT))
+			info->func[page] |= PMBUS_HAVE_POUT;
+	}
+}
+
+/*
+ * Identify chip parameters.
+ */
+static int pmbus_identify(struct i2c_client *client,
+			  struct pmbus_driver_info *info)
+{
+	int ret = 0;
+
+	if (!info->pages) {
+		/*
+		 * Check if the PAGE command is supported. If it is,
+		 * keep setting the page number until it fails or until the
+		 * maximum number of pages has been reached. Assume that
+		 * this is the number of pages supported by the chip.
+		 */
+		if (pmbus_check_byte_register(client, 0, PMBUS_PAGE)) {
+			int page;
+
+			for (page = 1; page < PMBUS_PAGES; page++) {
+				if (pmbus_set_page(client, page, 0xff) < 0)
+					break;
+			}
+			pmbus_set_page(client, 0, 0xff);
+			info->pages = page;
+		} else {
+			info->pages = 1;
+		}
+
+		pmbus_clear_faults(client);
+	}
+
+	if (pmbus_check_byte_register(client, 0, PMBUS_VOUT_MODE)) {
+		int vout_mode, i;
+
+		vout_mode = pmbus_read_byte_data(client, 0, PMBUS_VOUT_MODE);
+		if (vout_mode >= 0 && vout_mode != 0xff) {
+			switch (vout_mode >> 5) {
+			case 0:
+				break;
+			case 1:
+				info->format[PSC_VOLTAGE_OUT] = vid;
+				for (i = 0; i < info->pages; i++)
+					info->vrm_version[i] = vr11;
+				break;
+			case 2:
+				info->format[PSC_VOLTAGE_OUT] = direct;
+				break;
+			default:
+				ret = -ENODEV;
+				goto abort;
+			}
+		}
+	}
+
+	/*
+	 * We should check if the COEFFICIENTS register is supported.
+	 * If it is, and the chip is configured for direct mode, we can read
+	 * the coefficients from the chip, one set per group of sensor
+	 * registers.
+	 *
+	 * To do this, we will need access to a chip which actually supports the
+	 * COEFFICIENTS command, since the command is too complex to implement
+	 * without testing it. Until then, abort if a chip configured for direct
+	 * mode was detected.
+	 */
+	if (info->format[PSC_VOLTAGE_OUT] == direct) {
+		ret = -ENODEV;
+		goto abort;
+	}
+
+	/* Try to find sensor groups  */
+	pmbus_find_sensor_groups(client, info);
+abort:
+	return ret;
+}
+
+static int pmbus_probe(struct i2c_client *client)
+{
+	struct pmbus_driver_info *info;
+	struct pmbus_platform_data *pdata = NULL;
+	struct device *dev = &client->dev;
+	struct pmbus_device_info *device_info;
+
+	info = devm_kzalloc(dev, sizeof(struct pmbus_driver_info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	device_info = (struct pmbus_device_info *)i2c_match_id(pmbus_id, client)->driver_data;
+	if (device_info->flags) {
+		pdata = devm_kzalloc(dev, sizeof(struct pmbus_platform_data),
+				     GFP_KERNEL);
+		if (!pdata)
+			return -ENOMEM;
+
+		pdata->flags = device_info->flags;
+	}
+
+	info->pages = device_info->pages;
+	info->identify = pmbus_identify;
+	dev->platform_data = pdata;
+
+	return pmbus_do_probe(client, info);
+}
+
+static const struct pmbus_device_info pmbus_info_one = {
+	.pages = 1,
+	.flags = 0
+};
+
+static const struct pmbus_device_info pmbus_info_zero = {
+	.pages = 0,
+	.flags = 0
+};
+
+static const struct pmbus_device_info pmbus_info_one_skip = {
+	.pages = 1,
+	.flags = PMBUS_SKIP_STATUS_CHECK
+};
+
+static const struct pmbus_device_info pmbus_info_one_status = {
+	.pages = 1,
+	.flags = PMBUS_READ_STATUS_AFTER_FAILED_CHECK
+};
+
+/*
+ * Use driver_data to set the number of pages supported by the chip.
+ */
+static const struct i2c_device_id pmbus_id[] = {
+	{"adp4000", (kernel_ulong_t)&pmbus_info_one},
+	{"bmr310", (kernel_ulong_t)&pmbus_info_one_status},
+	{"bmr453", (kernel_ulong_t)&pmbus_info_one},
+	{"bmr454", (kernel_ulong_t)&pmbus_info_one},
+	{"bmr456", (kernel_ulong_t)&pmbus_info_one},
+	{"bmr457", (kernel_ulong_t)&pmbus_info_one},
+	{"bmr458", (kernel_ulong_t)&pmbus_info_one_status},
+	{"bmr480", (kernel_ulong_t)&pmbus_info_one_status},
+	{"bmr490", (kernel_ulong_t)&pmbus_info_one_status},
+	{"bmr491", (kernel_ulong_t)&pmbus_info_one_status},
+	{"bmr492", (kernel_ulong_t)&pmbus_info_one},
+	{"dps460", (kernel_ulong_t)&pmbus_info_one_skip},
+	{"dps650ab", (kernel_ulong_t)&pmbus_info_one_skip},
+	{"dps800", (kernel_ulong_t)&pmbus_info_one_skip},
+	{"max20796", (kernel_ulong_t)&pmbus_info_one},
+	{"mdt040", (kernel_ulong_t)&pmbus_info_one},
+	{"ncp4200", (kernel_ulong_t)&pmbus_info_one},
+	{"ncp4208", (kernel_ulong_t)&pmbus_info_one},
+	{"pdt003", (kernel_ulong_t)&pmbus_info_one},
+	{"pdt006", (kernel_ulong_t)&pmbus_info_one},
+	{"pdt012", (kernel_ulong_t)&pmbus_info_one},
+	{"pmbus", (kernel_ulong_t)&pmbus_info_zero},
+	{"sgd009", (kernel_ulong_t)&pmbus_info_one_skip},
+	{"tps40400", (kernel_ulong_t)&pmbus_info_one},
+	{"tps544b20", (kernel_ulong_t)&pmbus_info_one},
+	{"tps544b25", (kernel_ulong_t)&pmbus_info_one},
+	{"tps544c20", (kernel_ulong_t)&pmbus_info_one},
+	{"tps544c25", (kernel_ulong_t)&pmbus_info_one},
+	{"udt020", (kernel_ulong_t)&pmbus_info_one},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, pmbus_id);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver pmbus_driver = {
+	.driver = {
+		   .name = "pmbus",
+		   },
+	.probe_new = pmbus_probe,
+	.id_table = pmbus_id,
+};
+
+module_i2c_driver(pmbus_driver);
+
+MODULE_AUTHOR("Guenter Roeck");
+MODULE_DESCRIPTION("Generic PMBus driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/pmbus.h b/drivers/hwmon/pmbus/pmbus.h
new file mode 100644
index 000000000..10fb17879
--- /dev/null
+++ b/drivers/hwmon/pmbus/pmbus.h
@@ -0,0 +1,511 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * pmbus.h - Common defines and structures for PMBus devices
+ *
+ * Copyright (c) 2010, 2011 Ericsson AB.
+ * Copyright (c) 2012 Guenter Roeck
+ */
+
+#ifndef PMBUS_H
+#define PMBUS_H
+
+#include <linux/bitops.h>
+#include <linux/regulator/driver.h>
+
+/*
+ * Registers
+ */
+enum pmbus_regs {
+	PMBUS_PAGE			= 0x00,
+	PMBUS_OPERATION			= 0x01,
+	PMBUS_ON_OFF_CONFIG		= 0x02,
+	PMBUS_CLEAR_FAULTS		= 0x03,
+	PMBUS_PHASE			= 0x04,
+
+	PMBUS_WRITE_PROTECT		= 0x10,
+
+	PMBUS_CAPABILITY		= 0x19,
+	PMBUS_QUERY			= 0x1A,
+
+	PMBUS_VOUT_MODE			= 0x20,
+	PMBUS_VOUT_COMMAND		= 0x21,
+	PMBUS_VOUT_TRIM			= 0x22,
+	PMBUS_VOUT_CAL_OFFSET		= 0x23,
+	PMBUS_VOUT_MAX			= 0x24,
+	PMBUS_VOUT_MARGIN_HIGH		= 0x25,
+	PMBUS_VOUT_MARGIN_LOW		= 0x26,
+	PMBUS_VOUT_TRANSITION_RATE	= 0x27,
+	PMBUS_VOUT_DROOP		= 0x28,
+	PMBUS_VOUT_SCALE_LOOP		= 0x29,
+	PMBUS_VOUT_SCALE_MONITOR	= 0x2A,
+
+	PMBUS_COEFFICIENTS		= 0x30,
+	PMBUS_POUT_MAX			= 0x31,
+
+	PMBUS_FAN_CONFIG_12		= 0x3A,
+	PMBUS_FAN_COMMAND_1		= 0x3B,
+	PMBUS_FAN_COMMAND_2		= 0x3C,
+	PMBUS_FAN_CONFIG_34		= 0x3D,
+	PMBUS_FAN_COMMAND_3		= 0x3E,
+	PMBUS_FAN_COMMAND_4		= 0x3F,
+
+	PMBUS_VOUT_OV_FAULT_LIMIT	= 0x40,
+	PMBUS_VOUT_OV_FAULT_RESPONSE	= 0x41,
+	PMBUS_VOUT_OV_WARN_LIMIT	= 0x42,
+	PMBUS_VOUT_UV_WARN_LIMIT	= 0x43,
+	PMBUS_VOUT_UV_FAULT_LIMIT	= 0x44,
+	PMBUS_VOUT_UV_FAULT_RESPONSE	= 0x45,
+	PMBUS_IOUT_OC_FAULT_LIMIT	= 0x46,
+	PMBUS_IOUT_OC_FAULT_RESPONSE	= 0x47,
+	PMBUS_IOUT_OC_LV_FAULT_LIMIT	= 0x48,
+	PMBUS_IOUT_OC_LV_FAULT_RESPONSE	= 0x49,
+	PMBUS_IOUT_OC_WARN_LIMIT	= 0x4A,
+	PMBUS_IOUT_UC_FAULT_LIMIT	= 0x4B,
+	PMBUS_IOUT_UC_FAULT_RESPONSE	= 0x4C,
+
+	PMBUS_OT_FAULT_LIMIT		= 0x4F,
+	PMBUS_OT_FAULT_RESPONSE		= 0x50,
+	PMBUS_OT_WARN_LIMIT		= 0x51,
+	PMBUS_UT_WARN_LIMIT		= 0x52,
+	PMBUS_UT_FAULT_LIMIT		= 0x53,
+	PMBUS_UT_FAULT_RESPONSE		= 0x54,
+	PMBUS_VIN_OV_FAULT_LIMIT	= 0x55,
+	PMBUS_VIN_OV_FAULT_RESPONSE	= 0x56,
+	PMBUS_VIN_OV_WARN_LIMIT		= 0x57,
+	PMBUS_VIN_UV_WARN_LIMIT		= 0x58,
+	PMBUS_VIN_UV_FAULT_LIMIT	= 0x59,
+
+	PMBUS_IIN_OC_FAULT_LIMIT	= 0x5B,
+	PMBUS_IIN_OC_WARN_LIMIT		= 0x5D,
+
+	PMBUS_POUT_OP_FAULT_LIMIT	= 0x68,
+	PMBUS_POUT_OP_WARN_LIMIT	= 0x6A,
+	PMBUS_PIN_OP_WARN_LIMIT		= 0x6B,
+
+	PMBUS_STATUS_BYTE		= 0x78,
+	PMBUS_STATUS_WORD		= 0x79,
+	PMBUS_STATUS_VOUT		= 0x7A,
+	PMBUS_STATUS_IOUT		= 0x7B,
+	PMBUS_STATUS_INPUT		= 0x7C,
+	PMBUS_STATUS_TEMPERATURE	= 0x7D,
+	PMBUS_STATUS_CML		= 0x7E,
+	PMBUS_STATUS_OTHER		= 0x7F,
+	PMBUS_STATUS_MFR_SPECIFIC	= 0x80,
+	PMBUS_STATUS_FAN_12		= 0x81,
+	PMBUS_STATUS_FAN_34		= 0x82,
+
+	PMBUS_READ_VIN			= 0x88,
+	PMBUS_READ_IIN			= 0x89,
+	PMBUS_READ_VCAP			= 0x8A,
+	PMBUS_READ_VOUT			= 0x8B,
+	PMBUS_READ_IOUT			= 0x8C,
+	PMBUS_READ_TEMPERATURE_1	= 0x8D,
+	PMBUS_READ_TEMPERATURE_2	= 0x8E,
+	PMBUS_READ_TEMPERATURE_3	= 0x8F,
+	PMBUS_READ_FAN_SPEED_1		= 0x90,
+	PMBUS_READ_FAN_SPEED_2		= 0x91,
+	PMBUS_READ_FAN_SPEED_3		= 0x92,
+	PMBUS_READ_FAN_SPEED_4		= 0x93,
+	PMBUS_READ_DUTY_CYCLE		= 0x94,
+	PMBUS_READ_FREQUENCY		= 0x95,
+	PMBUS_READ_POUT			= 0x96,
+	PMBUS_READ_PIN			= 0x97,
+
+	PMBUS_REVISION			= 0x98,
+	PMBUS_MFR_ID			= 0x99,
+	PMBUS_MFR_MODEL			= 0x9A,
+	PMBUS_MFR_REVISION		= 0x9B,
+	PMBUS_MFR_LOCATION		= 0x9C,
+	PMBUS_MFR_DATE			= 0x9D,
+	PMBUS_MFR_SERIAL		= 0x9E,
+
+	PMBUS_MFR_VIN_MIN		= 0xA0,
+	PMBUS_MFR_VIN_MAX		= 0xA1,
+	PMBUS_MFR_IIN_MAX		= 0xA2,
+	PMBUS_MFR_PIN_MAX		= 0xA3,
+	PMBUS_MFR_VOUT_MIN		= 0xA4,
+	PMBUS_MFR_VOUT_MAX		= 0xA5,
+	PMBUS_MFR_IOUT_MAX		= 0xA6,
+	PMBUS_MFR_POUT_MAX		= 0xA7,
+
+	PMBUS_IC_DEVICE_ID		= 0xAD,
+	PMBUS_IC_DEVICE_REV		= 0xAE,
+
+	PMBUS_MFR_MAX_TEMP_1		= 0xC0,
+	PMBUS_MFR_MAX_TEMP_2		= 0xC1,
+	PMBUS_MFR_MAX_TEMP_3		= 0xC2,
+
+/*
+ * Virtual registers.
+ * Useful to support attributes which are not supported by standard PMBus
+ * registers but exist as manufacturer specific registers on individual chips.
+ * Must be mapped to real registers in device specific code.
+ *
+ * Semantics:
+ * Virtual registers are all word size.
+ * READ registers are read-only; writes are either ignored or return an error.
+ * RESET registers are read/write. Reading reset registers returns zero
+ * (used for detection), writing any value causes the associated history to be
+ * reset.
+ * Virtual registers have to be handled in device specific driver code. Chip
+ * driver code returns non-negative register values if a virtual register is
+ * supported, or a negative error code if not. The chip driver may return
+ * -ENODATA or any other error code in this case, though an error code other
+ * than -ENODATA is handled more efficiently and thus preferred. Either case,
+ * the calling PMBus core code will abort if the chip driver returns an error
+ * code when reading or writing virtual registers.
+ */
+	PMBUS_VIRT_BASE			= 0x100,
+	PMBUS_VIRT_READ_TEMP_AVG,
+	PMBUS_VIRT_READ_TEMP_MIN,
+	PMBUS_VIRT_READ_TEMP_MAX,
+	PMBUS_VIRT_RESET_TEMP_HISTORY,
+	PMBUS_VIRT_READ_VIN_AVG,
+	PMBUS_VIRT_READ_VIN_MIN,
+	PMBUS_VIRT_READ_VIN_MAX,
+	PMBUS_VIRT_RESET_VIN_HISTORY,
+	PMBUS_VIRT_READ_IIN_AVG,
+	PMBUS_VIRT_READ_IIN_MIN,
+	PMBUS_VIRT_READ_IIN_MAX,
+	PMBUS_VIRT_RESET_IIN_HISTORY,
+	PMBUS_VIRT_READ_PIN_AVG,
+	PMBUS_VIRT_READ_PIN_MIN,
+	PMBUS_VIRT_READ_PIN_MAX,
+	PMBUS_VIRT_RESET_PIN_HISTORY,
+	PMBUS_VIRT_READ_POUT_AVG,
+	PMBUS_VIRT_READ_POUT_MIN,
+	PMBUS_VIRT_READ_POUT_MAX,
+	PMBUS_VIRT_RESET_POUT_HISTORY,
+	PMBUS_VIRT_READ_VOUT_AVG,
+	PMBUS_VIRT_READ_VOUT_MIN,
+	PMBUS_VIRT_READ_VOUT_MAX,
+	PMBUS_VIRT_RESET_VOUT_HISTORY,
+	PMBUS_VIRT_READ_IOUT_AVG,
+	PMBUS_VIRT_READ_IOUT_MIN,
+	PMBUS_VIRT_READ_IOUT_MAX,
+	PMBUS_VIRT_RESET_IOUT_HISTORY,
+	PMBUS_VIRT_READ_TEMP2_AVG,
+	PMBUS_VIRT_READ_TEMP2_MIN,
+	PMBUS_VIRT_READ_TEMP2_MAX,
+	PMBUS_VIRT_RESET_TEMP2_HISTORY,
+
+	PMBUS_VIRT_READ_VMON,
+	PMBUS_VIRT_VMON_UV_WARN_LIMIT,
+	PMBUS_VIRT_VMON_OV_WARN_LIMIT,
+	PMBUS_VIRT_VMON_UV_FAULT_LIMIT,
+	PMBUS_VIRT_VMON_OV_FAULT_LIMIT,
+	PMBUS_VIRT_STATUS_VMON,
+
+	/*
+	 * RPM and PWM Fan control
+	 *
+	 * Drivers wanting to expose PWM control must define the behaviour of
+	 * PMBUS_VIRT_PWM_[1-4] and PMBUS_VIRT_PWM_ENABLE_[1-4] in the
+	 * {read,write}_word_data callback.
+	 *
+	 * pmbus core provides a default implementation for
+	 * PMBUS_VIRT_FAN_TARGET_[1-4].
+	 *
+	 * TARGET, PWM and PWM_ENABLE members must be defined sequentially;
+	 * pmbus core uses the difference between the provided register and
+	 * it's _1 counterpart to calculate the FAN/PWM ID.
+	 */
+	PMBUS_VIRT_FAN_TARGET_1,
+	PMBUS_VIRT_FAN_TARGET_2,
+	PMBUS_VIRT_FAN_TARGET_3,
+	PMBUS_VIRT_FAN_TARGET_4,
+	PMBUS_VIRT_PWM_1,
+	PMBUS_VIRT_PWM_2,
+	PMBUS_VIRT_PWM_3,
+	PMBUS_VIRT_PWM_4,
+	PMBUS_VIRT_PWM_ENABLE_1,
+	PMBUS_VIRT_PWM_ENABLE_2,
+	PMBUS_VIRT_PWM_ENABLE_3,
+	PMBUS_VIRT_PWM_ENABLE_4,
+
+	/* Samples for average
+	 *
+	 * Drivers wanting to expose functionality for changing the number of
+	 * samples used for average values should implement support in
+	 * {read,write}_word_data callback for either PMBUS_VIRT_SAMPLES if it
+	 * applies to all types of measurements, or any number of specific
+	 * PMBUS_VIRT_*_SAMPLES registers to allow for individual control.
+	 */
+	PMBUS_VIRT_SAMPLES,
+	PMBUS_VIRT_IN_SAMPLES,
+	PMBUS_VIRT_CURR_SAMPLES,
+	PMBUS_VIRT_POWER_SAMPLES,
+	PMBUS_VIRT_TEMP_SAMPLES,
+};
+
+/*
+ * OPERATION
+ */
+#define PB_OPERATION_CONTROL_ON		BIT(7)
+
+/*
+ * WRITE_PROTECT
+ */
+#define PB_WP_ALL	BIT(7)	/* all but WRITE_PROTECT */
+#define PB_WP_OP	BIT(6)	/* all but WP, OPERATION, PAGE */
+#define PB_WP_VOUT	BIT(5)	/* all but WP, OPERATION, PAGE, VOUT, ON_OFF */
+
+#define PB_WP_ANY	(PB_WP_ALL | PB_WP_OP | PB_WP_VOUT)
+
+/*
+ * CAPABILITY
+ */
+#define PB_CAPABILITY_SMBALERT		BIT(4)
+#define PB_CAPABILITY_ERROR_CHECK	BIT(7)
+
+/*
+ * VOUT_MODE
+ */
+#define PB_VOUT_MODE_MODE_MASK		0xe0
+#define PB_VOUT_MODE_PARAM_MASK		0x1f
+
+#define PB_VOUT_MODE_LINEAR		0x00
+#define PB_VOUT_MODE_VID		0x20
+#define PB_VOUT_MODE_DIRECT		0x40
+
+/*
+ * Fan configuration
+ */
+#define PB_FAN_2_PULSE_MASK		(BIT(0) | BIT(1))
+#define PB_FAN_2_RPM			BIT(2)
+#define PB_FAN_2_INSTALLED		BIT(3)
+#define PB_FAN_1_PULSE_MASK		(BIT(4) | BIT(5))
+#define PB_FAN_1_RPM			BIT(6)
+#define PB_FAN_1_INSTALLED		BIT(7)
+
+enum pmbus_fan_mode { percent = 0, rpm };
+
+/*
+ * STATUS_BYTE, STATUS_WORD (lower)
+ */
+#define PB_STATUS_NONE_ABOVE		BIT(0)
+#define PB_STATUS_CML			BIT(1)
+#define PB_STATUS_TEMPERATURE		BIT(2)
+#define PB_STATUS_VIN_UV		BIT(3)
+#define PB_STATUS_IOUT_OC		BIT(4)
+#define PB_STATUS_VOUT_OV		BIT(5)
+#define PB_STATUS_OFF			BIT(6)
+#define PB_STATUS_BUSY			BIT(7)
+
+/*
+ * STATUS_WORD (upper)
+ */
+#define PB_STATUS_UNKNOWN		BIT(8)
+#define PB_STATUS_OTHER			BIT(9)
+#define PB_STATUS_FANS			BIT(10)
+#define PB_STATUS_POWER_GOOD_N		BIT(11)
+#define PB_STATUS_WORD_MFR		BIT(12)
+#define PB_STATUS_INPUT			BIT(13)
+#define PB_STATUS_IOUT_POUT		BIT(14)
+#define PB_STATUS_VOUT			BIT(15)
+
+/*
+ * STATUS_IOUT
+ */
+#define PB_POUT_OP_WARNING		BIT(0)
+#define PB_POUT_OP_FAULT		BIT(1)
+#define PB_POWER_LIMITING		BIT(2)
+#define PB_CURRENT_SHARE_FAULT		BIT(3)
+#define PB_IOUT_UC_FAULT		BIT(4)
+#define PB_IOUT_OC_WARNING		BIT(5)
+#define PB_IOUT_OC_LV_FAULT		BIT(6)
+#define PB_IOUT_OC_FAULT		BIT(7)
+
+/*
+ * STATUS_VOUT, STATUS_INPUT
+ */
+#define PB_VOLTAGE_VIN_OFF		BIT(3)
+#define PB_VOLTAGE_UV_FAULT		BIT(4)
+#define PB_VOLTAGE_UV_WARNING		BIT(5)
+#define PB_VOLTAGE_OV_WARNING		BIT(6)
+#define PB_VOLTAGE_OV_FAULT		BIT(7)
+
+/*
+ * STATUS_INPUT
+ */
+#define PB_PIN_OP_WARNING		BIT(0)
+#define PB_IIN_OC_WARNING		BIT(1)
+#define PB_IIN_OC_FAULT			BIT(2)
+
+/*
+ * STATUS_TEMPERATURE
+ */
+#define PB_TEMP_UT_FAULT		BIT(4)
+#define PB_TEMP_UT_WARNING		BIT(5)
+#define PB_TEMP_OT_WARNING		BIT(6)
+#define PB_TEMP_OT_FAULT		BIT(7)
+
+/*
+ * STATUS_FAN
+ */
+#define PB_FAN_AIRFLOW_WARNING		BIT(0)
+#define PB_FAN_AIRFLOW_FAULT		BIT(1)
+#define PB_FAN_FAN2_SPEED_OVERRIDE	BIT(2)
+#define PB_FAN_FAN1_SPEED_OVERRIDE	BIT(3)
+#define PB_FAN_FAN2_WARNING		BIT(4)
+#define PB_FAN_FAN1_WARNING		BIT(5)
+#define PB_FAN_FAN2_FAULT		BIT(6)
+#define PB_FAN_FAN1_FAULT		BIT(7)
+
+/*
+ * CML_FAULT_STATUS
+ */
+#define PB_CML_FAULT_OTHER_MEM_LOGIC	BIT(0)
+#define PB_CML_FAULT_OTHER_COMM		BIT(1)
+#define PB_CML_FAULT_PROCESSOR		BIT(3)
+#define PB_CML_FAULT_MEMORY		BIT(4)
+#define PB_CML_FAULT_PACKET_ERROR	BIT(5)
+#define PB_CML_FAULT_INVALID_DATA	BIT(6)
+#define PB_CML_FAULT_INVALID_COMMAND	BIT(7)
+
+enum pmbus_sensor_classes {
+	PSC_VOLTAGE_IN = 0,
+	PSC_VOLTAGE_OUT,
+	PSC_CURRENT_IN,
+	PSC_CURRENT_OUT,
+	PSC_POWER,
+	PSC_TEMPERATURE,
+	PSC_FAN,
+	PSC_PWM,
+	PSC_NUM_CLASSES		/* Number of power sensor classes */
+};
+
+#define PMBUS_PAGES	32	/* Per PMBus specification */
+#define PMBUS_PHASES	10	/* Maximum number of phases per page */
+
+/* Functionality bit mask */
+#define PMBUS_HAVE_VIN		BIT(0)
+#define PMBUS_HAVE_VCAP		BIT(1)
+#define PMBUS_HAVE_VOUT		BIT(2)
+#define PMBUS_HAVE_IIN		BIT(3)
+#define PMBUS_HAVE_IOUT		BIT(4)
+#define PMBUS_HAVE_PIN		BIT(5)
+#define PMBUS_HAVE_POUT		BIT(6)
+#define PMBUS_HAVE_FAN12	BIT(7)
+#define PMBUS_HAVE_FAN34	BIT(8)
+#define PMBUS_HAVE_TEMP		BIT(9)
+#define PMBUS_HAVE_TEMP2	BIT(10)
+#define PMBUS_HAVE_TEMP3	BIT(11)
+#define PMBUS_HAVE_STATUS_VOUT	BIT(12)
+#define PMBUS_HAVE_STATUS_IOUT	BIT(13)
+#define PMBUS_HAVE_STATUS_INPUT	BIT(14)
+#define PMBUS_HAVE_STATUS_TEMP	BIT(15)
+#define PMBUS_HAVE_STATUS_FAN12	BIT(16)
+#define PMBUS_HAVE_STATUS_FAN34	BIT(17)
+#define PMBUS_HAVE_VMON		BIT(18)
+#define PMBUS_HAVE_STATUS_VMON	BIT(19)
+#define PMBUS_HAVE_PWM12	BIT(20)
+#define PMBUS_HAVE_PWM34	BIT(21)
+#define PMBUS_HAVE_SAMPLES	BIT(22)
+
+#define PMBUS_PHASE_VIRTUAL	BIT(30)	/* Phases on this page are virtual */
+#define PMBUS_PAGE_VIRTUAL	BIT(31)	/* Page is virtual */
+
+enum pmbus_data_format { linear = 0, ieee754, direct, vid };
+enum vrm_version { vr11 = 0, vr12, vr13, imvp9, amd625mv };
+
+struct pmbus_driver_info {
+	int pages;		/* Total number of pages */
+	u8 phases[PMBUS_PAGES];	/* Number of phases per page */
+	enum pmbus_data_format format[PSC_NUM_CLASSES];
+	enum vrm_version vrm_version[PMBUS_PAGES]; /* vrm version per page */
+	/*
+	 * Support one set of coefficients for each sensor type
+	 * Used for chips providing data in direct mode.
+	 */
+	int m[PSC_NUM_CLASSES];	/* mantissa for direct data format */
+	int b[PSC_NUM_CLASSES];	/* offset */
+	int R[PSC_NUM_CLASSES];	/* exponent */
+
+	u32 func[PMBUS_PAGES];	/* Functionality, per page */
+	u32 pfunc[PMBUS_PHASES];/* Functionality, per phase */
+	/*
+	 * The following functions map manufacturing specific register values
+	 * to PMBus standard register values. Specify only if mapping is
+	 * necessary.
+	 * Functions return the register value (read) or zero (write) if
+	 * successful. A return value of -ENODATA indicates that there is no
+	 * manufacturer specific register, but that a standard PMBus register
+	 * may exist. Any other negative return value indicates that the
+	 * register does not exist, and that no attempt should be made to read
+	 * the standard register.
+	 */
+	int (*read_byte_data)(struct i2c_client *client, int page, int reg);
+	int (*read_word_data)(struct i2c_client *client, int page, int phase,
+			      int reg);
+	int (*write_byte_data)(struct i2c_client *client, int page, int reg,
+			      u8 byte);
+	int (*write_word_data)(struct i2c_client *client, int page, int reg,
+			       u16 word);
+	int (*write_byte)(struct i2c_client *client, int page, u8 value);
+	/*
+	 * The identify function determines supported PMBus functionality.
+	 * This function is only necessary if a chip driver supports multiple
+	 * chips, and the chip functionality is not pre-determined.
+	 */
+	int (*identify)(struct i2c_client *client,
+			struct pmbus_driver_info *info);
+
+	/* Regulator functionality, if supported by this chip driver. */
+	int num_regulators;
+	const struct regulator_desc *reg_desc;
+
+	/* custom attributes */
+	const struct attribute_group **groups;
+};
+
+/* Regulator ops */
+
+extern const struct regulator_ops pmbus_regulator_ops;
+
+/* Macros for filling in array of struct regulator_desc */
+#define PMBUS_REGULATOR_STEP(_name, _id, _voltages, _step)  \
+	[_id] = {						\
+		.name = (_name # _id),				\
+		.id = (_id),					\
+		.of_match = of_match_ptr(_name # _id),		\
+		.regulators_node = of_match_ptr("regulators"),	\
+		.ops = &pmbus_regulator_ops,			\
+		.type = REGULATOR_VOLTAGE,			\
+		.owner = THIS_MODULE,				\
+		.n_voltages = _voltages,			\
+		.uV_step = _step,				\
+	}
+
+#define PMBUS_REGULATOR(_name, _id)	PMBUS_REGULATOR_STEP(_name, _id, 0, 0)
+
+/* Function declarations */
+
+void pmbus_clear_cache(struct i2c_client *client);
+void pmbus_set_update(struct i2c_client *client, u8 reg, bool update);
+int pmbus_set_page(struct i2c_client *client, int page, int phase);
+int pmbus_read_word_data(struct i2c_client *client, int page, int phase,
+			 u8 reg);
+int pmbus_write_word_data(struct i2c_client *client, int page, u8 reg,
+			  u16 word);
+int pmbus_read_byte_data(struct i2c_client *client, int page, u8 reg);
+int pmbus_write_byte(struct i2c_client *client, int page, u8 value);
+int pmbus_write_byte_data(struct i2c_client *client, int page, u8 reg,
+			  u8 value);
+int pmbus_update_byte_data(struct i2c_client *client, int page, u8 reg,
+			   u8 mask, u8 value);
+void pmbus_clear_faults(struct i2c_client *client);
+bool pmbus_check_byte_register(struct i2c_client *client, int page, int reg);
+bool pmbus_check_word_register(struct i2c_client *client, int page, int reg);
+int pmbus_do_probe(struct i2c_client *client, struct pmbus_driver_info *info);
+const struct pmbus_driver_info *pmbus_get_driver_info(struct i2c_client
+						      *client);
+int pmbus_get_fan_rate_device(struct i2c_client *client, int page, int id,
+			      enum pmbus_fan_mode mode);
+int pmbus_get_fan_rate_cached(struct i2c_client *client, int page, int id,
+			      enum pmbus_fan_mode mode);
+int pmbus_update_fan(struct i2c_client *client, int page, int id,
+		     u8 config, u8 mask, u16 command);
+struct dentry *pmbus_get_debugfs_dir(struct i2c_client *client);
+
+#endif /* PMBUS_H */
diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
new file mode 100644
index 000000000..7ec049347
--- /dev/null
+++ b/drivers/hwmon/pmbus/pmbus_core.c
@@ -0,0 +1,3431 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Hardware monitoring driver for PMBus devices
+ *
+ * Copyright (c) 2010, 2011 Ericsson AB.
+ * Copyright (c) 2012 Guenter Roeck
+ */
+
+#include <linux/debugfs.h>
+#include <linux/kernel.h>
+#include <linux/math64.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/pmbus.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/of.h>
+#include <linux/thermal.h>
+#include "pmbus.h"
+
+/*
+ * Number of additional attribute pointers to allocate
+ * with each call to krealloc
+ */
+#define PMBUS_ATTR_ALLOC_SIZE	32
+#define PMBUS_NAME_SIZE		24
+
+struct pmbus_sensor {
+	struct pmbus_sensor *next;
+	char name[PMBUS_NAME_SIZE];	/* sysfs sensor name */
+	struct device_attribute attribute;
+	u8 page;		/* page number */
+	u8 phase;		/* phase number, 0xff for all phases */
+	u16 reg;		/* register */
+	enum pmbus_sensor_classes class;	/* sensor class */
+	bool update;		/* runtime sensor update needed */
+	bool convert;		/* Whether or not to apply linear/vid/direct */
+	int data;		/* Sensor data.
+				   Negative if there was a read error */
+};
+#define to_pmbus_sensor(_attr) \
+	container_of(_attr, struct pmbus_sensor, attribute)
+
+struct pmbus_boolean {
+	char name[PMBUS_NAME_SIZE];	/* sysfs boolean name */
+	struct sensor_device_attribute attribute;
+	struct pmbus_sensor *s1;
+	struct pmbus_sensor *s2;
+};
+#define to_pmbus_boolean(_attr) \
+	container_of(_attr, struct pmbus_boolean, attribute)
+
+struct pmbus_label {
+	char name[PMBUS_NAME_SIZE];	/* sysfs label name */
+	struct device_attribute attribute;
+	char label[PMBUS_NAME_SIZE];	/* label */
+};
+#define to_pmbus_label(_attr) \
+	container_of(_attr, struct pmbus_label, attribute)
+
+/* Macros for converting between sensor index and register/page/status mask */
+
+#define PB_STATUS_MASK	0xffff
+#define PB_REG_SHIFT	16
+#define PB_REG_MASK	0x3ff
+#define PB_PAGE_SHIFT	26
+#define PB_PAGE_MASK	0x3f
+
+#define pb_reg_to_index(page, reg, mask)	(((page) << PB_PAGE_SHIFT) | \
+						 ((reg) << PB_REG_SHIFT) | (mask))
+
+#define pb_index_to_page(index)			(((index) >> PB_PAGE_SHIFT) & PB_PAGE_MASK)
+#define pb_index_to_reg(index)			(((index) >> PB_REG_SHIFT) & PB_REG_MASK)
+#define pb_index_to_mask(index)			((index) & PB_STATUS_MASK)
+
+struct pmbus_data {
+	struct device *dev;
+	struct device *hwmon_dev;
+
+	u32 flags;		/* from platform data */
+
+	int exponent[PMBUS_PAGES];
+				/* linear mode: exponent for output voltages */
+
+	const struct pmbus_driver_info *info;
+
+	int max_attributes;
+	int num_attributes;
+	struct attribute_group group;
+	const struct attribute_group **groups;
+	struct dentry *debugfs;		/* debugfs device directory */
+
+	struct pmbus_sensor *sensors;
+
+	struct mutex update_lock;
+
+	bool has_status_word;		/* device uses STATUS_WORD register */
+	int (*read_status)(struct i2c_client *client, int page);
+
+	s16 currpage;	/* current page, -1 for unknown/unset */
+	s16 currphase;	/* current phase, 0xff for all, -1 for unknown/unset */
+
+	int vout_low[PMBUS_PAGES];	/* voltage low margin */
+	int vout_high[PMBUS_PAGES];	/* voltage high margin */
+};
+
+struct pmbus_debugfs_entry {
+	struct i2c_client *client;
+	u8 page;
+	u8 reg;
+};
+
+static const int pmbus_fan_rpm_mask[] = {
+	PB_FAN_1_RPM,
+	PB_FAN_2_RPM,
+	PB_FAN_1_RPM,
+	PB_FAN_2_RPM,
+};
+
+static const int pmbus_fan_config_registers[] = {
+	PMBUS_FAN_CONFIG_12,
+	PMBUS_FAN_CONFIG_12,
+	PMBUS_FAN_CONFIG_34,
+	PMBUS_FAN_CONFIG_34
+};
+
+static const int pmbus_fan_command_registers[] = {
+	PMBUS_FAN_COMMAND_1,
+	PMBUS_FAN_COMMAND_2,
+	PMBUS_FAN_COMMAND_3,
+	PMBUS_FAN_COMMAND_4,
+};
+
+void pmbus_clear_cache(struct i2c_client *client)
+{
+	struct pmbus_data *data = i2c_get_clientdata(client);
+	struct pmbus_sensor *sensor;
+
+	for (sensor = data->sensors; sensor; sensor = sensor->next)
+		sensor->data = -ENODATA;
+}
+EXPORT_SYMBOL_NS_GPL(pmbus_clear_cache, PMBUS);
+
+void pmbus_set_update(struct i2c_client *client, u8 reg, bool update)
+{
+	struct pmbus_data *data = i2c_get_clientdata(client);
+	struct pmbus_sensor *sensor;
+
+	for (sensor = data->sensors; sensor; sensor = sensor->next)
+		if (sensor->reg == reg)
+			sensor->update = update;
+}
+EXPORT_SYMBOL_NS_GPL(pmbus_set_update, PMBUS);
+
+int pmbus_set_page(struct i2c_client *client, int page, int phase)
+{
+	struct pmbus_data *data = i2c_get_clientdata(client);
+	int rv;
+
+	if (page < 0)
+		return 0;
+
+	if (!(data->info->func[page] & PMBUS_PAGE_VIRTUAL) &&
+	    data->info->pages > 1 && page != data->currpage) {
+		rv = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page);
+		if (rv < 0)
+			return rv;
+
+		rv = i2c_smbus_read_byte_data(client, PMBUS_PAGE);
+		if (rv < 0)
+			return rv;
+
+		if (rv != page)
+			return -EIO;
+	}
+	data->currpage = page;
+
+	if (data->info->phases[page] && data->currphase != phase &&
+	    !(data->info->func[page] & PMBUS_PHASE_VIRTUAL)) {
+		rv = i2c_smbus_write_byte_data(client, PMBUS_PHASE,
+					       phase);
+		if (rv)
+			return rv;
+	}
+	data->currphase = phase;
+
+	return 0;
+}
+EXPORT_SYMBOL_NS_GPL(pmbus_set_page, PMBUS);
+
+int pmbus_write_byte(struct i2c_client *client, int page, u8 value)
+{
+	int rv;
+
+	rv = pmbus_set_page(client, page, 0xff);
+	if (rv < 0)
+		return rv;
+
+	return i2c_smbus_write_byte(client, value);
+}
+EXPORT_SYMBOL_NS_GPL(pmbus_write_byte, PMBUS);
+
+/*
+ * _pmbus_write_byte() is similar to pmbus_write_byte(), but checks if
+ * a device specific mapping function exists and calls it if necessary.
+ */
+static int _pmbus_write_byte(struct i2c_client *client, int page, u8 value)
+{
+	struct pmbus_data *data = i2c_get_clientdata(client);
+	const struct pmbus_driver_info *info = data->info;
+	int status;
+
+	if (info->write_byte) {
+		status = info->write_byte(client, page, value);
+		if (status != -ENODATA)
+			return status;
+	}
+	return pmbus_write_byte(client, page, value);
+}
+
+int pmbus_write_word_data(struct i2c_client *client, int page, u8 reg,
+			  u16 word)
+{
+	int rv;
+
+	rv = pmbus_set_page(client, page, 0xff);
+	if (rv < 0)
+		return rv;
+
+	return i2c_smbus_write_word_data(client, reg, word);
+}
+EXPORT_SYMBOL_NS_GPL(pmbus_write_word_data, PMBUS);
+
+
+static int pmbus_write_virt_reg(struct i2c_client *client, int page, int reg,
+				u16 word)
+{
+	int bit;
+	int id;
+	int rv;
+
+	switch (reg) {
+	case PMBUS_VIRT_FAN_TARGET_1 ... PMBUS_VIRT_FAN_TARGET_4:
+		id = reg - PMBUS_VIRT_FAN_TARGET_1;
+		bit = pmbus_fan_rpm_mask[id];
+		rv = pmbus_update_fan(client, page, id, bit, bit, word);
+		break;
+	default:
+		rv = -ENXIO;
+		break;
+	}
+
+	return rv;
+}
+
+/*
+ * _pmbus_write_word_data() is similar to pmbus_write_word_data(), but checks if
+ * a device specific mapping function exists and calls it if necessary.
+ */
+static int _pmbus_write_word_data(struct i2c_client *client, int page, int reg,
+				  u16 word)
+{
+	struct pmbus_data *data = i2c_get_clientdata(client);
+	const struct pmbus_driver_info *info = data->info;
+	int status;
+
+	if (info->write_word_data) {
+		status = info->write_word_data(client, page, reg, word);
+		if (status != -ENODATA)
+			return status;
+	}
+
+	if (reg >= PMBUS_VIRT_BASE)
+		return pmbus_write_virt_reg(client, page, reg, word);
+
+	return pmbus_write_word_data(client, page, reg, word);
+}
+
+/*
+ * _pmbus_write_byte_data() is similar to pmbus_write_byte_data(), but checks if
+ * a device specific mapping function exists and calls it if necessary.
+ */
+static int _pmbus_write_byte_data(struct i2c_client *client, int page, int reg, u8 value)
+{
+	struct pmbus_data *data = i2c_get_clientdata(client);
+	const struct pmbus_driver_info *info = data->info;
+	int status;
+
+	if (info->write_byte_data) {
+		status = info->write_byte_data(client, page, reg, value);
+		if (status != -ENODATA)
+			return status;
+	}
+	return pmbus_write_byte_data(client, page, reg, value);
+}
+
+/*
+ * _pmbus_read_byte_data() is similar to pmbus_read_byte_data(), but checks if
+ * a device specific mapping function exists and calls it if necessary.
+ */
+static int _pmbus_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+	struct pmbus_data *data = i2c_get_clientdata(client);
+	const struct pmbus_driver_info *info = data->info;
+	int status;
+
+	if (info->read_byte_data) {
+		status = info->read_byte_data(client, page, reg);
+		if (status != -ENODATA)
+			return status;
+	}
+	return pmbus_read_byte_data(client, page, reg);
+}
+
+int pmbus_update_fan(struct i2c_client *client, int page, int id,
+		     u8 config, u8 mask, u16 command)
+{
+	int from;
+	int rv;
+	u8 to;
+
+	from = _pmbus_read_byte_data(client, page,
+				    pmbus_fan_config_registers[id]);
+	if (from < 0)
+		return from;
+
+	to = (from & ~mask) | (config & mask);
+	if (to != from) {
+		rv = _pmbus_write_byte_data(client, page,
+					   pmbus_fan_config_registers[id], to);
+		if (rv < 0)
+			return rv;
+	}
+
+	return _pmbus_write_word_data(client, page,
+				      pmbus_fan_command_registers[id], command);
+}
+EXPORT_SYMBOL_NS_GPL(pmbus_update_fan, PMBUS);
+
+int pmbus_read_word_data(struct i2c_client *client, int page, int phase, u8 reg)
+{
+	int rv;
+
+	rv = pmbus_set_page(client, page, phase);
+	if (rv < 0)
+		return rv;
+
+	return i2c_smbus_read_word_data(client, reg);
+}
+EXPORT_SYMBOL_NS_GPL(pmbus_read_word_data, PMBUS);
+
+static int pmbus_read_virt_reg(struct i2c_client *client, int page, int reg)
+{
+	int rv;
+	int id;
+
+	switch (reg) {
+	case PMBUS_VIRT_FAN_TARGET_1 ... PMBUS_VIRT_FAN_TARGET_4:
+		id = reg - PMBUS_VIRT_FAN_TARGET_1;
+		rv = pmbus_get_fan_rate_device(client, page, id, rpm);
+		break;
+	default:
+		rv = -ENXIO;
+		break;
+	}
+
+	return rv;
+}
+
+/*
+ * _pmbus_read_word_data() is similar to pmbus_read_word_data(), but checks if
+ * a device specific mapping function exists and calls it if necessary.
+ */
+static int _pmbus_read_word_data(struct i2c_client *client, int page,
+				 int phase, int reg)
+{
+	struct pmbus_data *data = i2c_get_clientdata(client);
+	const struct pmbus_driver_info *info = data->info;
+	int status;
+
+	if (info->read_word_data) {
+		status = info->read_word_data(client, page, phase, reg);
+		if (status != -ENODATA)
+			return status;
+	}
+
+	if (reg >= PMBUS_VIRT_BASE)
+		return pmbus_read_virt_reg(client, page, reg);
+
+	return pmbus_read_word_data(client, page, phase, reg);
+}
+
+/* Same as above, but without phase parameter, for use in check functions */
+static int __pmbus_read_word_data(struct i2c_client *client, int page, int reg)
+{
+	return _pmbus_read_word_data(client, page, 0xff, reg);
+}
+
+int pmbus_read_byte_data(struct i2c_client *client, int page, u8 reg)
+{
+	int rv;
+
+	rv = pmbus_set_page(client, page, 0xff);
+	if (rv < 0)
+		return rv;
+
+	return i2c_smbus_read_byte_data(client, reg);
+}
+EXPORT_SYMBOL_NS_GPL(pmbus_read_byte_data, PMBUS);
+
+int pmbus_write_byte_data(struct i2c_client *client, int page, u8 reg, u8 value)
+{
+	int rv;
+
+	rv = pmbus_set_page(client, page, 0xff);
+	if (rv < 0)
+		return rv;
+
+	return i2c_smbus_write_byte_data(client, reg, value);
+}
+EXPORT_SYMBOL_NS_GPL(pmbus_write_byte_data, PMBUS);
+
+int pmbus_update_byte_data(struct i2c_client *client, int page, u8 reg,
+			   u8 mask, u8 value)
+{
+	unsigned int tmp;
+	int rv;
+
+	rv = _pmbus_read_byte_data(client, page, reg);
+	if (rv < 0)
+		return rv;
+
+	tmp = (rv & ~mask) | (value & mask);
+
+	if (tmp != rv)
+		rv = _pmbus_write_byte_data(client, page, reg, tmp);
+
+	return rv;
+}
+EXPORT_SYMBOL_NS_GPL(pmbus_update_byte_data, PMBUS);
+
+static int pmbus_read_block_data(struct i2c_client *client, int page, u8 reg,
+				 char *data_buf)
+{
+	int rv;
+
+	rv = pmbus_set_page(client, page, 0xff);
+	if (rv < 0)
+		return rv;
+
+	return i2c_smbus_read_block_data(client, reg, data_buf);
+}
+
+static struct pmbus_sensor *pmbus_find_sensor(struct pmbus_data *data, int page,
+					      int reg)
+{
+	struct pmbus_sensor *sensor;
+
+	for (sensor = data->sensors; sensor; sensor = sensor->next) {
+		if (sensor->page == page && sensor->reg == reg)
+			return sensor;
+	}
+
+	return ERR_PTR(-EINVAL);
+}
+
+static int pmbus_get_fan_rate(struct i2c_client *client, int page, int id,
+			      enum pmbus_fan_mode mode,
+			      bool from_cache)
+{
+	struct pmbus_data *data = i2c_get_clientdata(client);
+	bool want_rpm, have_rpm;
+	struct pmbus_sensor *s;
+	int config;
+	int reg;
+
+	want_rpm = (mode == rpm);
+
+	if (from_cache) {
+		reg = want_rpm ? PMBUS_VIRT_FAN_TARGET_1 : PMBUS_VIRT_PWM_1;
+		s = pmbus_find_sensor(data, page, reg + id);
+		if (IS_ERR(s))
+			return PTR_ERR(s);
+
+		return s->data;
+	}
+
+	config = _pmbus_read_byte_data(client, page,
+				      pmbus_fan_config_registers[id]);
+	if (config < 0)
+		return config;
+
+	have_rpm = !!(config & pmbus_fan_rpm_mask[id]);
+	if (want_rpm == have_rpm)
+		return pmbus_read_word_data(client, page, 0xff,
+					    pmbus_fan_command_registers[id]);
+
+	/* Can't sensibly map between RPM and PWM, just return zero */
+	return 0;
+}
+
+int pmbus_get_fan_rate_device(struct i2c_client *client, int page, int id,
+			      enum pmbus_fan_mode mode)
+{
+	return pmbus_get_fan_rate(client, page, id, mode, false);
+}
+EXPORT_SYMBOL_NS_GPL(pmbus_get_fan_rate_device, PMBUS);
+
+int pmbus_get_fan_rate_cached(struct i2c_client *client, int page, int id,
+			      enum pmbus_fan_mode mode)
+{
+	return pmbus_get_fan_rate(client, page, id, mode, true);
+}
+EXPORT_SYMBOL_NS_GPL(pmbus_get_fan_rate_cached, PMBUS);
+
+static void pmbus_clear_fault_page(struct i2c_client *client, int page)
+{
+	_pmbus_write_byte(client, page, PMBUS_CLEAR_FAULTS);
+}
+
+void pmbus_clear_faults(struct i2c_client *client)
+{
+	struct pmbus_data *data = i2c_get_clientdata(client);
+	int i;
+
+	for (i = 0; i < data->info->pages; i++)
+		pmbus_clear_fault_page(client, i);
+}
+EXPORT_SYMBOL_NS_GPL(pmbus_clear_faults, PMBUS);
+
+static int pmbus_check_status_cml(struct i2c_client *client)
+{
+	struct pmbus_data *data = i2c_get_clientdata(client);
+	int status, status2;
+
+	status = data->read_status(client, -1);
+	if (status < 0 || (status & PB_STATUS_CML)) {
+		status2 = _pmbus_read_byte_data(client, -1, PMBUS_STATUS_CML);
+		if (status2 < 0 || (status2 & PB_CML_FAULT_INVALID_COMMAND))
+			return -EIO;
+	}
+	return 0;
+}
+
+static bool pmbus_check_register(struct i2c_client *client,
+				 int (*func)(struct i2c_client *client,
+					     int page, int reg),
+				 int page, int reg)
+{
+	int rv;
+	struct pmbus_data *data = i2c_get_clientdata(client);
+
+	rv = func(client, page, reg);
+	if (rv >= 0 && !(data->flags & PMBUS_SKIP_STATUS_CHECK))
+		rv = pmbus_check_status_cml(client);
+	if (rv < 0 && (data->flags & PMBUS_READ_STATUS_AFTER_FAILED_CHECK))
+		data->read_status(client, -1);
+	pmbus_clear_fault_page(client, -1);
+	return rv >= 0;
+}
+
+static bool pmbus_check_status_register(struct i2c_client *client, int page)
+{
+	int status;
+	struct pmbus_data *data = i2c_get_clientdata(client);
+
+	status = data->read_status(client, page);
+	if (status >= 0 && !(data->flags & PMBUS_SKIP_STATUS_CHECK) &&
+	    (status & PB_STATUS_CML)) {
+		status = _pmbus_read_byte_data(client, -1, PMBUS_STATUS_CML);
+		if (status < 0 || (status & PB_CML_FAULT_INVALID_COMMAND))
+			status = -EIO;
+	}
+
+	pmbus_clear_fault_page(client, -1);
+	return status >= 0;
+}
+
+bool pmbus_check_byte_register(struct i2c_client *client, int page, int reg)
+{
+	return pmbus_check_register(client, _pmbus_read_byte_data, page, reg);
+}
+EXPORT_SYMBOL_NS_GPL(pmbus_check_byte_register, PMBUS);
+
+bool pmbus_check_word_register(struct i2c_client *client, int page, int reg)
+{
+	return pmbus_check_register(client, __pmbus_read_word_data, page, reg);
+}
+EXPORT_SYMBOL_NS_GPL(pmbus_check_word_register, PMBUS);
+
+static bool __maybe_unused pmbus_check_block_register(struct i2c_client *client,
+						      int page, int reg)
+{
+	int rv;
+	struct pmbus_data *data = i2c_get_clientdata(client);
+	char data_buf[I2C_SMBUS_BLOCK_MAX + 2];
+
+	rv = pmbus_read_block_data(client, page, reg, data_buf);
+	if (rv >= 0 && !(data->flags & PMBUS_SKIP_STATUS_CHECK))
+		rv = pmbus_check_status_cml(client);
+	if (rv < 0 && (data->flags & PMBUS_READ_STATUS_AFTER_FAILED_CHECK))
+		data->read_status(client, -1);
+	pmbus_clear_fault_page(client, -1);
+	return rv >= 0;
+}
+
+const struct pmbus_driver_info *pmbus_get_driver_info(struct i2c_client *client)
+{
+	struct pmbus_data *data = i2c_get_clientdata(client);
+
+	return data->info;
+}
+EXPORT_SYMBOL_NS_GPL(pmbus_get_driver_info, PMBUS);
+
+static int pmbus_get_status(struct i2c_client *client, int page, int reg)
+{
+	struct pmbus_data *data = i2c_get_clientdata(client);
+	int status;
+
+	switch (reg) {
+	case PMBUS_STATUS_WORD:
+		status = data->read_status(client, page);
+		break;
+	default:
+		status = _pmbus_read_byte_data(client, page, reg);
+		break;
+	}
+	if (status < 0)
+		pmbus_clear_faults(client);
+	return status;
+}
+
+static void pmbus_update_sensor_data(struct i2c_client *client, struct pmbus_sensor *sensor)
+{
+	if (sensor->data < 0 || sensor->update)
+		sensor->data = _pmbus_read_word_data(client, sensor->page,
+						     sensor->phase, sensor->reg);
+}
+
+/*
+ * Convert ieee754 sensor values to milli- or micro-units
+ * depending on sensor type.
+ *
+ * ieee754 data format:
+ *	bit 15:		sign
+ *	bit 10..14:	exponent
+ *	bit 0..9:	mantissa
+ * exponent=0:
+ *	v=(−1)^signbit * 2^(−14) * 0.significantbits
+ * exponent=1..30:
+ *	v=(−1)^signbit * 2^(exponent - 15) * 1.significantbits
+ * exponent=31:
+ *	v=NaN
+ *
+ * Add the number mantissa bits into the calculations for simplicity.
+ * To do that, add '10' to the exponent. By doing that, we can just add
+ * 0x400 to normal values and get the expected result.
+ */
+static long pmbus_reg2data_ieee754(struct pmbus_data *data,
+				   struct pmbus_sensor *sensor)
+{
+	int exponent;
+	bool sign;
+	long val;
+
+	/* only support half precision for now */
+	sign = sensor->data & 0x8000;
+	exponent = (sensor->data >> 10) & 0x1f;
+	val = sensor->data & 0x3ff;
+
+	if (exponent == 0) {			/* subnormal */
+		exponent = -(14 + 10);
+	} else if (exponent ==  0x1f) {		/* NaN, convert to min/max */
+		exponent = 0;
+		val = 65504;
+	} else {
+		exponent -= (15 + 10);		/* normal */
+		val |= 0x400;
+	}
+
+	/* scale result to milli-units for all sensors except fans */
+	if (sensor->class != PSC_FAN)
+		val = val * 1000L;
+
+	/* scale result to micro-units for power sensors */
+	if (sensor->class == PSC_POWER)
+		val = val * 1000L;
+
+	if (exponent >= 0)
+		val <<= exponent;
+	else
+		val >>= -exponent;
+
+	if (sign)
+		val = -val;
+
+	return val;
+}
+
+/*
+ * Convert linear sensor values to milli- or micro-units
+ * depending on sensor type.
+ */
+static s64 pmbus_reg2data_linear(struct pmbus_data *data,
+				 struct pmbus_sensor *sensor)
+{
+	s16 exponent;
+	s32 mantissa;
+	s64 val;
+
+	if (sensor->class == PSC_VOLTAGE_OUT) {	/* LINEAR16 */
+		exponent = data->exponent[sensor->page];
+		mantissa = (u16) sensor->data;
+	} else {				/* LINEAR11 */
+		exponent = ((s16)sensor->data) >> 11;
+		mantissa = ((s16)((sensor->data & 0x7ff) << 5)) >> 5;
+	}
+
+	val = mantissa;
+
+	/* scale result to milli-units for all sensors except fans */
+	if (sensor->class != PSC_FAN)
+		val = val * 1000LL;
+
+	/* scale result to micro-units for power sensors */
+	if (sensor->class == PSC_POWER)
+		val = val * 1000LL;
+
+	if (exponent >= 0)
+		val <<= exponent;
+	else
+		val >>= -exponent;
+
+	return val;
+}
+
+/*
+ * Convert direct sensor values to milli- or micro-units
+ * depending on sensor type.
+ */
+static s64 pmbus_reg2data_direct(struct pmbus_data *data,
+				 struct pmbus_sensor *sensor)
+{
+	s64 b, val = (s16)sensor->data;
+	s32 m, R;
+
+	m = data->info->m[sensor->class];
+	b = data->info->b[sensor->class];
+	R = data->info->R[sensor->class];
+
+	if (m == 0)
+		return 0;
+
+	/* X = 1/m * (Y * 10^-R - b) */
+	R = -R;
+	/* scale result to milli-units for everything but fans */
+	if (!(sensor->class == PSC_FAN || sensor->class == PSC_PWM)) {
+		R += 3;
+		b *= 1000;
+	}
+
+	/* scale result to micro-units for power sensors */
+	if (sensor->class == PSC_POWER) {
+		R += 3;
+		b *= 1000;
+	}
+
+	while (R > 0) {
+		val *= 10;
+		R--;
+	}
+	while (R < 0) {
+		val = div_s64(val + 5LL, 10L);  /* round closest */
+		R++;
+	}
+
+	val = div_s64(val - b, m);
+	return val;
+}
+
+/*
+ * Convert VID sensor values to milli- or micro-units
+ * depending on sensor type.
+ */
+static s64 pmbus_reg2data_vid(struct pmbus_data *data,
+			      struct pmbus_sensor *sensor)
+{
+	long val = sensor->data;
+	long rv = 0;
+
+	switch (data->info->vrm_version[sensor->page]) {
+	case vr11:
+		if (val >= 0x02 && val <= 0xb2)
+			rv = DIV_ROUND_CLOSEST(160000 - (val - 2) * 625, 100);
+		break;
+	case vr12:
+		if (val >= 0x01)
+			rv = 250 + (val - 1) * 5;
+		break;
+	case vr13:
+		if (val >= 0x01)
+			rv = 500 + (val - 1) * 10;
+		break;
+	case imvp9:
+		if (val >= 0x01)
+			rv = 200 + (val - 1) * 10;
+		break;
+	case amd625mv:
+		if (val >= 0x0 && val <= 0xd8)
+			rv = DIV_ROUND_CLOSEST(155000 - val * 625, 100);
+		break;
+	}
+	return rv;
+}
+
+static s64 pmbus_reg2data(struct pmbus_data *data, struct pmbus_sensor *sensor)
+{
+	s64 val;
+
+	if (!sensor->convert)
+		return sensor->data;
+
+	switch (data->info->format[sensor->class]) {
+	case direct:
+		val = pmbus_reg2data_direct(data, sensor);
+		break;
+	case vid:
+		val = pmbus_reg2data_vid(data, sensor);
+		break;
+	case ieee754:
+		val = pmbus_reg2data_ieee754(data, sensor);
+		break;
+	case linear:
+	default:
+		val = pmbus_reg2data_linear(data, sensor);
+		break;
+	}
+	return val;
+}
+
+#define MAX_IEEE_MANTISSA	(0x7ff * 1000)
+#define MIN_IEEE_MANTISSA	(0x400 * 1000)
+
+static u16 pmbus_data2reg_ieee754(struct pmbus_data *data,
+				  struct pmbus_sensor *sensor, long val)
+{
+	u16 exponent = (15 + 10);
+	long mantissa;
+	u16 sign = 0;
+
+	/* simple case */
+	if (val == 0)
+		return 0;
+
+	if (val < 0) {
+		sign = 0x8000;
+		val = -val;
+	}
+
+	/* Power is in uW. Convert to mW before converting. */
+	if (sensor->class == PSC_POWER)
+		val = DIV_ROUND_CLOSEST(val, 1000L);
+
+	/*
+	 * For simplicity, convert fan data to milli-units
+	 * before calculating the exponent.
+	 */
+	if (sensor->class == PSC_FAN)
+		val = val * 1000;
+
+	/* Reduce large mantissa until it fits into 10 bit */
+	while (val > MAX_IEEE_MANTISSA && exponent < 30) {
+		exponent++;
+		val >>= 1;
+	}
+	/*
+	 * Increase small mantissa to generate valid 'normal'
+	 * number
+	 */
+	while (val < MIN_IEEE_MANTISSA && exponent > 1) {
+		exponent--;
+		val <<= 1;
+	}
+
+	/* Convert mantissa from milli-units to units */
+	mantissa = DIV_ROUND_CLOSEST(val, 1000);
+
+	/*
+	 * Ensure that the resulting number is within range.
+	 * Valid range is 0x400..0x7ff, where bit 10 reflects
+	 * the implied high bit in normalized ieee754 numbers.
+	 * Set the range to 0x400..0x7ff to reflect this.
+	 * The upper bit is then removed by the mask against
+	 * 0x3ff in the final assignment.
+	 */
+	if (mantissa > 0x7ff)
+		mantissa = 0x7ff;
+	else if (mantissa < 0x400)
+		mantissa = 0x400;
+
+	/* Convert to sign, 5 bit exponent, 10 bit mantissa */
+	return sign | (mantissa & 0x3ff) | ((exponent << 10) & 0x7c00);
+}
+
+#define MAX_LIN_MANTISSA	(1023 * 1000)
+#define MIN_LIN_MANTISSA	(511 * 1000)
+
+static u16 pmbus_data2reg_linear(struct pmbus_data *data,
+				 struct pmbus_sensor *sensor, s64 val)
+{
+	s16 exponent = 0, mantissa;
+	bool negative = false;
+
+	/* simple case */
+	if (val == 0)
+		return 0;
+
+	if (sensor->class == PSC_VOLTAGE_OUT) {
+		/* LINEAR16 does not support negative voltages */
+		if (val < 0)
+			return 0;
+
+		/*
+		 * For a static exponents, we don't have a choice
+		 * but to adjust the value to it.
+		 */
+		if (data->exponent[sensor->page] < 0)
+			val <<= -data->exponent[sensor->page];
+		else
+			val >>= data->exponent[sensor->page];
+		val = DIV_ROUND_CLOSEST_ULL(val, 1000);
+		return clamp_val(val, 0, 0xffff);
+	}
+
+	if (val < 0) {
+		negative = true;
+		val = -val;
+	}
+
+	/* Power is in uW. Convert to mW before converting. */
+	if (sensor->class == PSC_POWER)
+		val = DIV_ROUND_CLOSEST_ULL(val, 1000);
+
+	/*
+	 * For simplicity, convert fan data to milli-units
+	 * before calculating the exponent.
+	 */
+	if (sensor->class == PSC_FAN)
+		val = val * 1000LL;
+
+	/* Reduce large mantissa until it fits into 10 bit */
+	while (val >= MAX_LIN_MANTISSA && exponent < 15) {
+		exponent++;
+		val >>= 1;
+	}
+	/* Increase small mantissa to improve precision */
+	while (val < MIN_LIN_MANTISSA && exponent > -15) {
+		exponent--;
+		val <<= 1;
+	}
+
+	/* Convert mantissa from milli-units to units */
+	mantissa = clamp_val(DIV_ROUND_CLOSEST_ULL(val, 1000), 0, 0x3ff);
+
+	/* restore sign */
+	if (negative)
+		mantissa = -mantissa;
+
+	/* Convert to 5 bit exponent, 11 bit mantissa */
+	return (mantissa & 0x7ff) | ((exponent << 11) & 0xf800);
+}
+
+static u16 pmbus_data2reg_direct(struct pmbus_data *data,
+				 struct pmbus_sensor *sensor, s64 val)
+{
+	s64 b;
+	s32 m, R;
+
+	m = data->info->m[sensor->class];
+	b = data->info->b[sensor->class];
+	R = data->info->R[sensor->class];
+
+	/* Power is in uW. Adjust R and b. */
+	if (sensor->class == PSC_POWER) {
+		R -= 3;
+		b *= 1000;
+	}
+
+	/* Calculate Y = (m * X + b) * 10^R */
+	if (!(sensor->class == PSC_FAN || sensor->class == PSC_PWM)) {
+		R -= 3;		/* Adjust R and b for data in milli-units */
+		b *= 1000;
+	}
+	val = val * m + b;
+
+	while (R > 0) {
+		val *= 10;
+		R--;
+	}
+	while (R < 0) {
+		val = div_s64(val + 5LL, 10L);  /* round closest */
+		R++;
+	}
+
+	return (u16)clamp_val(val, S16_MIN, S16_MAX);
+}
+
+static u16 pmbus_data2reg_vid(struct pmbus_data *data,
+			      struct pmbus_sensor *sensor, s64 val)
+{
+	val = clamp_val(val, 500, 1600);
+
+	return 2 + DIV_ROUND_CLOSEST_ULL((1600LL - val) * 100LL, 625);
+}
+
+static u16 pmbus_data2reg(struct pmbus_data *data,
+			  struct pmbus_sensor *sensor, s64 val)
+{
+	u16 regval;
+
+	if (!sensor->convert)
+		return val;
+
+	switch (data->info->format[sensor->class]) {
+	case direct:
+		regval = pmbus_data2reg_direct(data, sensor, val);
+		break;
+	case vid:
+		regval = pmbus_data2reg_vid(data, sensor, val);
+		break;
+	case ieee754:
+		regval = pmbus_data2reg_ieee754(data, sensor, val);
+		break;
+	case linear:
+	default:
+		regval = pmbus_data2reg_linear(data, sensor, val);
+		break;
+	}
+	return regval;
+}
+
+/*
+ * Return boolean calculated from converted data.
+ * <index> defines a status register index and mask.
+ * The mask is in the lower 8 bits, the register index is in bits 8..23.
+ *
+ * The associated pmbus_boolean structure contains optional pointers to two
+ * sensor attributes. If specified, those attributes are compared against each
+ * other to determine if a limit has been exceeded.
+ *
+ * If the sensor attribute pointers are NULL, the function returns true if
+ * (status[reg] & mask) is true.
+ *
+ * If sensor attribute pointers are provided, a comparison against a specified
+ * limit has to be performed to determine the boolean result.
+ * In this case, the function returns true if v1 >= v2 (where v1 and v2 are
+ * sensor values referenced by sensor attribute pointers s1 and s2).
+ *
+ * To determine if an object exceeds upper limits, specify <s1,s2> = <v,limit>.
+ * To determine if an object exceeds lower limits, specify <s1,s2> = <limit,v>.
+ *
+ * If a negative value is stored in any of the referenced registers, this value
+ * reflects an error code which will be returned.
+ */
+static int pmbus_get_boolean(struct i2c_client *client, struct pmbus_boolean *b,
+			     int index)
+{
+	struct pmbus_data *data = i2c_get_clientdata(client);
+	struct pmbus_sensor *s1 = b->s1;
+	struct pmbus_sensor *s2 = b->s2;
+	u16 mask = pb_index_to_mask(index);
+	u8 page = pb_index_to_page(index);
+	u16 reg = pb_index_to_reg(index);
+	int ret, status;
+	u16 regval;
+
+	mutex_lock(&data->update_lock);
+	status = pmbus_get_status(client, page, reg);
+	if (status < 0) {
+		ret = status;
+		goto unlock;
+	}
+
+	if (s1)
+		pmbus_update_sensor_data(client, s1);
+	if (s2)
+		pmbus_update_sensor_data(client, s2);
+
+	regval = status & mask;
+	if (regval) {
+		ret = _pmbus_write_byte_data(client, page, reg, regval);
+		if (ret)
+			goto unlock;
+	}
+	if (s1 && s2) {
+		s64 v1, v2;
+
+		if (s1->data < 0) {
+			ret = s1->data;
+			goto unlock;
+		}
+		if (s2->data < 0) {
+			ret = s2->data;
+			goto unlock;
+		}
+
+		v1 = pmbus_reg2data(data, s1);
+		v2 = pmbus_reg2data(data, s2);
+		ret = !!(regval && v1 >= v2);
+	} else {
+		ret = !!regval;
+	}
+unlock:
+	mutex_unlock(&data->update_lock);
+	return ret;
+}
+
+static ssize_t pmbus_show_boolean(struct device *dev,
+				  struct device_attribute *da, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+	struct pmbus_boolean *boolean = to_pmbus_boolean(attr);
+	struct i2c_client *client = to_i2c_client(dev->parent);
+	int val;
+
+	val = pmbus_get_boolean(client, boolean, attr->index);
+	if (val < 0)
+		return val;
+	return sysfs_emit(buf, "%d\n", val);
+}
+
+static ssize_t pmbus_show_sensor(struct device *dev,
+				 struct device_attribute *devattr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev->parent);
+	struct pmbus_sensor *sensor = to_pmbus_sensor(devattr);
+	struct pmbus_data *data = i2c_get_clientdata(client);
+	ssize_t ret;
+
+	mutex_lock(&data->update_lock);
+	pmbus_update_sensor_data(client, sensor);
+	if (sensor->data < 0)
+		ret = sensor->data;
+	else
+		ret = sysfs_emit(buf, "%lld\n", pmbus_reg2data(data, sensor));
+	mutex_unlock(&data->update_lock);
+	return ret;
+}
+
+static ssize_t pmbus_set_sensor(struct device *dev,
+				struct device_attribute *devattr,
+				const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev->parent);
+	struct pmbus_data *data = i2c_get_clientdata(client);
+	struct pmbus_sensor *sensor = to_pmbus_sensor(devattr);
+	ssize_t rv = count;
+	s64 val;
+	int ret;
+	u16 regval;
+
+	if (kstrtos64(buf, 10, &val) < 0)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	regval = pmbus_data2reg(data, sensor, val);
+	ret = _pmbus_write_word_data(client, sensor->page, sensor->reg, regval);
+	if (ret < 0)
+		rv = ret;
+	else
+		sensor->data = -ENODATA;
+	mutex_unlock(&data->update_lock);
+	return rv;
+}
+
+static ssize_t pmbus_show_label(struct device *dev,
+				struct device_attribute *da, char *buf)
+{
+	struct pmbus_label *label = to_pmbus_label(da);
+
+	return sysfs_emit(buf, "%s\n", label->label);
+}
+
+static int pmbus_add_attribute(struct pmbus_data *data, struct attribute *attr)
+{
+	if (data->num_attributes >= data->max_attributes - 1) {
+		int new_max_attrs = data->max_attributes + PMBUS_ATTR_ALLOC_SIZE;
+		void *new_attrs = devm_krealloc(data->dev, data->group.attrs,
+						new_max_attrs * sizeof(void *),
+						GFP_KERNEL);
+		if (!new_attrs)
+			return -ENOMEM;
+		data->group.attrs = new_attrs;
+		data->max_attributes = new_max_attrs;
+	}
+
+	data->group.attrs[data->num_attributes++] = attr;
+	data->group.attrs[data->num_attributes] = NULL;
+	return 0;
+}
+
+static void pmbus_dev_attr_init(struct device_attribute *dev_attr,
+				const char *name,
+				umode_t mode,
+				ssize_t (*show)(struct device *dev,
+						struct device_attribute *attr,
+						char *buf),
+				ssize_t (*store)(struct device *dev,
+						 struct device_attribute *attr,
+						 const char *buf, size_t count))
+{
+	sysfs_attr_init(&dev_attr->attr);
+	dev_attr->attr.name = name;
+	dev_attr->attr.mode = mode;
+	dev_attr->show = show;
+	dev_attr->store = store;
+}
+
+static void pmbus_attr_init(struct sensor_device_attribute *a,
+			    const char *name,
+			    umode_t mode,
+			    ssize_t (*show)(struct device *dev,
+					    struct device_attribute *attr,
+					    char *buf),
+			    ssize_t (*store)(struct device *dev,
+					     struct device_attribute *attr,
+					     const char *buf, size_t count),
+			    int idx)
+{
+	pmbus_dev_attr_init(&a->dev_attr, name, mode, show, store);
+	a->index = idx;
+}
+
+static int pmbus_add_boolean(struct pmbus_data *data,
+			     const char *name, const char *type, int seq,
+			     struct pmbus_sensor *s1,
+			     struct pmbus_sensor *s2,
+			     u8 page, u16 reg, u16 mask)
+{
+	struct pmbus_boolean *boolean;
+	struct sensor_device_attribute *a;
+
+	if (WARN((s1 && !s2) || (!s1 && s2), "Bad s1/s2 parameters\n"))
+		return -EINVAL;
+
+	boolean = devm_kzalloc(data->dev, sizeof(*boolean), GFP_KERNEL);
+	if (!boolean)
+		return -ENOMEM;
+
+	a = &boolean->attribute;
+
+	snprintf(boolean->name, sizeof(boolean->name), "%s%d_%s",
+		 name, seq, type);
+	boolean->s1 = s1;
+	boolean->s2 = s2;
+	pmbus_attr_init(a, boolean->name, 0444, pmbus_show_boolean, NULL,
+			pb_reg_to_index(page, reg, mask));
+
+	return pmbus_add_attribute(data, &a->dev_attr.attr);
+}
+
+/* of thermal for pmbus temperature sensors */
+struct pmbus_thermal_data {
+	struct pmbus_data *pmbus_data;
+	struct pmbus_sensor *sensor;
+};
+
+static int pmbus_thermal_get_temp(struct thermal_zone_device *tz, int *temp)
+{
+	struct pmbus_thermal_data *tdata = tz->devdata;
+	struct pmbus_sensor *sensor = tdata->sensor;
+	struct pmbus_data *pmbus_data = tdata->pmbus_data;
+	struct i2c_client *client = to_i2c_client(pmbus_data->dev);
+	struct device *dev = pmbus_data->hwmon_dev;
+	int ret = 0;
+
+	if (!dev) {
+		/* May not even get to hwmon yet */
+		*temp = 0;
+		return 0;
+	}
+
+	mutex_lock(&pmbus_data->update_lock);
+	pmbus_update_sensor_data(client, sensor);
+	if (sensor->data < 0)
+		ret = sensor->data;
+	else
+		*temp = (int)pmbus_reg2data(pmbus_data, sensor);
+	mutex_unlock(&pmbus_data->update_lock);
+
+	return ret;
+}
+
+static const struct thermal_zone_device_ops pmbus_thermal_ops = {
+	.get_temp = pmbus_thermal_get_temp,
+};
+
+static int pmbus_thermal_add_sensor(struct pmbus_data *pmbus_data,
+				    struct pmbus_sensor *sensor, int index)
+{
+	struct device *dev = pmbus_data->dev;
+	struct pmbus_thermal_data *tdata;
+	struct thermal_zone_device *tzd;
+
+	tdata = devm_kzalloc(dev, sizeof(*tdata), GFP_KERNEL);
+	if (!tdata)
+		return -ENOMEM;
+
+	tdata->sensor = sensor;
+	tdata->pmbus_data = pmbus_data;
+
+	tzd = devm_thermal_of_zone_register(dev, index, tdata,
+					    &pmbus_thermal_ops);
+	/*
+	 * If CONFIG_THERMAL_OF is disabled, this returns -ENODEV,
+	 * so ignore that error but forward any other error.
+	 */
+	if (IS_ERR(tzd) && (PTR_ERR(tzd) != -ENODEV))
+		return PTR_ERR(tzd);
+
+	return 0;
+}
+
+static struct pmbus_sensor *pmbus_add_sensor(struct pmbus_data *data,
+					     const char *name, const char *type,
+					     int seq, int page, int phase,
+					     int reg,
+					     enum pmbus_sensor_classes class,
+					     bool update, bool readonly,
+					     bool convert)
+{
+	struct pmbus_sensor *sensor;
+	struct device_attribute *a;
+
+	sensor = devm_kzalloc(data->dev, sizeof(*sensor), GFP_KERNEL);
+	if (!sensor)
+		return NULL;
+	a = &sensor->attribute;
+
+	if (type)
+		snprintf(sensor->name, sizeof(sensor->name), "%s%d_%s",
+			 name, seq, type);
+	else
+		snprintf(sensor->name, sizeof(sensor->name), "%s%d",
+			 name, seq);
+
+	if (data->flags & PMBUS_WRITE_PROTECTED)
+		readonly = true;
+
+	sensor->page = page;
+	sensor->phase = phase;
+	sensor->reg = reg;
+	sensor->class = class;
+	sensor->update = update;
+	sensor->convert = convert;
+	sensor->data = -ENODATA;
+	pmbus_dev_attr_init(a, sensor->name,
+			    readonly ? 0444 : 0644,
+			    pmbus_show_sensor, pmbus_set_sensor);
+
+	if (pmbus_add_attribute(data, &a->attr))
+		return NULL;
+
+	sensor->next = data->sensors;
+	data->sensors = sensor;
+
+	/* temperature sensors with _input values are registered with thermal */
+	if (class == PSC_TEMPERATURE && strcmp(type, "input") == 0)
+		pmbus_thermal_add_sensor(data, sensor, seq);
+
+	return sensor;
+}
+
+static int pmbus_add_label(struct pmbus_data *data,
+			   const char *name, int seq,
+			   const char *lstring, int index, int phase)
+{
+	struct pmbus_label *label;
+	struct device_attribute *a;
+
+	label = devm_kzalloc(data->dev, sizeof(*label), GFP_KERNEL);
+	if (!label)
+		return -ENOMEM;
+
+	a = &label->attribute;
+
+	snprintf(label->name, sizeof(label->name), "%s%d_label", name, seq);
+	if (!index) {
+		if (phase == 0xff)
+			strncpy(label->label, lstring,
+				sizeof(label->label) - 1);
+		else
+			snprintf(label->label, sizeof(label->label), "%s.%d",
+				 lstring, phase);
+	} else {
+		if (phase == 0xff)
+			snprintf(label->label, sizeof(label->label), "%s%d",
+				 lstring, index);
+		else
+			snprintf(label->label, sizeof(label->label), "%s%d.%d",
+				 lstring, index, phase);
+	}
+
+	pmbus_dev_attr_init(a, label->name, 0444, pmbus_show_label, NULL);
+	return pmbus_add_attribute(data, &a->attr);
+}
+
+/*
+ * Search for attributes. Allocate sensors, booleans, and labels as needed.
+ */
+
+/*
+ * The pmbus_limit_attr structure describes a single limit attribute
+ * and its associated alarm attribute.
+ */
+struct pmbus_limit_attr {
+	u16 reg;		/* Limit register */
+	u16 sbit;		/* Alarm attribute status bit */
+	bool update;		/* True if register needs updates */
+	bool low;		/* True if low limit; for limits with compare
+				   functions only */
+	const char *attr;	/* Attribute name */
+	const char *alarm;	/* Alarm attribute name */
+};
+
+/*
+ * The pmbus_sensor_attr structure describes one sensor attribute. This
+ * description includes a reference to the associated limit attributes.
+ */
+struct pmbus_sensor_attr {
+	u16 reg;			/* sensor register */
+	u16 gbit;			/* generic status bit */
+	u8 nlimit;			/* # of limit registers */
+	enum pmbus_sensor_classes class;/* sensor class */
+	const char *label;		/* sensor label */
+	bool paged;			/* true if paged sensor */
+	bool update;			/* true if update needed */
+	bool compare;			/* true if compare function needed */
+	u32 func;			/* sensor mask */
+	u32 sfunc;			/* sensor status mask */
+	int sreg;			/* status register */
+	const struct pmbus_limit_attr *limit;/* limit registers */
+};
+
+/*
+ * Add a set of limit attributes and, if supported, the associated
+ * alarm attributes.
+ * returns 0 if no alarm register found, 1 if an alarm register was found,
+ * < 0 on errors.
+ */
+static int pmbus_add_limit_attrs(struct i2c_client *client,
+				 struct pmbus_data *data,
+				 const struct pmbus_driver_info *info,
+				 const char *name, int index, int page,
+				 struct pmbus_sensor *base,
+				 const struct pmbus_sensor_attr *attr)
+{
+	const struct pmbus_limit_attr *l = attr->limit;
+	int nlimit = attr->nlimit;
+	int have_alarm = 0;
+	int i, ret;
+	struct pmbus_sensor *curr;
+
+	for (i = 0; i < nlimit; i++) {
+		if (pmbus_check_word_register(client, page, l->reg)) {
+			curr = pmbus_add_sensor(data, name, l->attr, index,
+						page, 0xff, l->reg, attr->class,
+						attr->update || l->update,
+						false, true);
+			if (!curr)
+				return -ENOMEM;
+			if (l->sbit && (info->func[page] & attr->sfunc)) {
+				ret = pmbus_add_boolean(data, name,
+					l->alarm, index,
+					attr->compare ?  l->low ? curr : base
+						      : NULL,
+					attr->compare ? l->low ? base : curr
+						      : NULL,
+					page, attr->sreg, l->sbit);
+				if (ret)
+					return ret;
+				have_alarm = 1;
+			}
+		}
+		l++;
+	}
+	return have_alarm;
+}
+
+static int pmbus_add_sensor_attrs_one(struct i2c_client *client,
+				      struct pmbus_data *data,
+				      const struct pmbus_driver_info *info,
+				      const char *name,
+				      int index, int page, int phase,
+				      const struct pmbus_sensor_attr *attr,
+				      bool paged)
+{
+	struct pmbus_sensor *base;
+	bool upper = !!(attr->gbit & 0xff00);	/* need to check STATUS_WORD */
+	int ret;
+
+	if (attr->label) {
+		ret = pmbus_add_label(data, name, index, attr->label,
+				      paged ? page + 1 : 0, phase);
+		if (ret)
+			return ret;
+	}
+	base = pmbus_add_sensor(data, name, "input", index, page, phase,
+				attr->reg, attr->class, true, true, true);
+	if (!base)
+		return -ENOMEM;
+	/* No limit and alarm attributes for phase specific sensors */
+	if (attr->sfunc && phase == 0xff) {
+		ret = pmbus_add_limit_attrs(client, data, info, name,
+					    index, page, base, attr);
+		if (ret < 0)
+			return ret;
+		/*
+		 * Add generic alarm attribute only if there are no individual
+		 * alarm attributes, if there is a global alarm bit, and if
+		 * the generic status register (word or byte, depending on
+		 * which global bit is set) for this page is accessible.
+		 */
+		if (!ret && attr->gbit &&
+		    (!upper || data->has_status_word) &&
+		    pmbus_check_status_register(client, page)) {
+			ret = pmbus_add_boolean(data, name, "alarm", index,
+						NULL, NULL,
+						page, PMBUS_STATUS_WORD,
+						attr->gbit);
+			if (ret)
+				return ret;
+		}
+	}
+	return 0;
+}
+
+static bool pmbus_sensor_is_paged(const struct pmbus_driver_info *info,
+				  const struct pmbus_sensor_attr *attr)
+{
+	int p;
+
+	if (attr->paged)
+		return true;
+
+	/*
+	 * Some attributes may be present on more than one page despite
+	 * not being marked with the paged attribute. If that is the case,
+	 * then treat the sensor as being paged and add the page suffix to the
+	 * attribute name.
+	 * We don't just add the paged attribute to all such attributes, in
+	 * order to maintain the un-suffixed labels in the case where the
+	 * attribute is only on page 0.
+	 */
+	for (p = 1; p < info->pages; p++) {
+		if (info->func[p] & attr->func)
+			return true;
+	}
+	return false;
+}
+
+static int pmbus_add_sensor_attrs(struct i2c_client *client,
+				  struct pmbus_data *data,
+				  const char *name,
+				  const struct pmbus_sensor_attr *attrs,
+				  int nattrs)
+{
+	const struct pmbus_driver_info *info = data->info;
+	int index, i;
+	int ret;
+
+	index = 1;
+	for (i = 0; i < nattrs; i++) {
+		int page, pages;
+		bool paged = pmbus_sensor_is_paged(info, attrs);
+
+		pages = paged ? info->pages : 1;
+		for (page = 0; page < pages; page++) {
+			if (info->func[page] & attrs->func) {
+				ret = pmbus_add_sensor_attrs_one(client, data, info,
+								 name, index, page,
+								 0xff, attrs, paged);
+				if (ret)
+					return ret;
+				index++;
+			}
+			if (info->phases[page]) {
+				int phase;
+
+				for (phase = 0; phase < info->phases[page];
+				     phase++) {
+					if (!(info->pfunc[phase] & attrs->func))
+						continue;
+					ret = pmbus_add_sensor_attrs_one(client,
+						data, info, name, index, page,
+						phase, attrs, paged);
+					if (ret)
+						return ret;
+					index++;
+				}
+			}
+		}
+		attrs++;
+	}
+	return 0;
+}
+
+static const struct pmbus_limit_attr vin_limit_attrs[] = {
+	{
+		.reg = PMBUS_VIN_UV_WARN_LIMIT,
+		.attr = "min",
+		.alarm = "min_alarm",
+		.sbit = PB_VOLTAGE_UV_WARNING,
+	}, {
+		.reg = PMBUS_VIN_UV_FAULT_LIMIT,
+		.attr = "lcrit",
+		.alarm = "lcrit_alarm",
+		.sbit = PB_VOLTAGE_UV_FAULT | PB_VOLTAGE_VIN_OFF,
+	}, {
+		.reg = PMBUS_VIN_OV_WARN_LIMIT,
+		.attr = "max",
+		.alarm = "max_alarm",
+		.sbit = PB_VOLTAGE_OV_WARNING,
+	}, {
+		.reg = PMBUS_VIN_OV_FAULT_LIMIT,
+		.attr = "crit",
+		.alarm = "crit_alarm",
+		.sbit = PB_VOLTAGE_OV_FAULT,
+	}, {
+		.reg = PMBUS_VIRT_READ_VIN_AVG,
+		.update = true,
+		.attr = "average",
+	}, {
+		.reg = PMBUS_VIRT_READ_VIN_MIN,
+		.update = true,
+		.attr = "lowest",
+	}, {
+		.reg = PMBUS_VIRT_READ_VIN_MAX,
+		.update = true,
+		.attr = "highest",
+	}, {
+		.reg = PMBUS_VIRT_RESET_VIN_HISTORY,
+		.attr = "reset_history",
+	}, {
+		.reg = PMBUS_MFR_VIN_MIN,
+		.attr = "rated_min",
+	}, {
+		.reg = PMBUS_MFR_VIN_MAX,
+		.attr = "rated_max",
+	},
+};
+
+static const struct pmbus_limit_attr vmon_limit_attrs[] = {
+	{
+		.reg = PMBUS_VIRT_VMON_UV_WARN_LIMIT,
+		.attr = "min",
+		.alarm = "min_alarm",
+		.sbit = PB_VOLTAGE_UV_WARNING,
+	}, {
+		.reg = PMBUS_VIRT_VMON_UV_FAULT_LIMIT,
+		.attr = "lcrit",
+		.alarm = "lcrit_alarm",
+		.sbit = PB_VOLTAGE_UV_FAULT,
+	}, {
+		.reg = PMBUS_VIRT_VMON_OV_WARN_LIMIT,
+		.attr = "max",
+		.alarm = "max_alarm",
+		.sbit = PB_VOLTAGE_OV_WARNING,
+	}, {
+		.reg = PMBUS_VIRT_VMON_OV_FAULT_LIMIT,
+		.attr = "crit",
+		.alarm = "crit_alarm",
+		.sbit = PB_VOLTAGE_OV_FAULT,
+	}
+};
+
+static const struct pmbus_limit_attr vout_limit_attrs[] = {
+	{
+		.reg = PMBUS_VOUT_UV_WARN_LIMIT,
+		.attr = "min",
+		.alarm = "min_alarm",
+		.sbit = PB_VOLTAGE_UV_WARNING,
+	}, {
+		.reg = PMBUS_VOUT_UV_FAULT_LIMIT,
+		.attr = "lcrit",
+		.alarm = "lcrit_alarm",
+		.sbit = PB_VOLTAGE_UV_FAULT,
+	}, {
+		.reg = PMBUS_VOUT_OV_WARN_LIMIT,
+		.attr = "max",
+		.alarm = "max_alarm",
+		.sbit = PB_VOLTAGE_OV_WARNING,
+	}, {
+		.reg = PMBUS_VOUT_OV_FAULT_LIMIT,
+		.attr = "crit",
+		.alarm = "crit_alarm",
+		.sbit = PB_VOLTAGE_OV_FAULT,
+	}, {
+		.reg = PMBUS_VIRT_READ_VOUT_AVG,
+		.update = true,
+		.attr = "average",
+	}, {
+		.reg = PMBUS_VIRT_READ_VOUT_MIN,
+		.update = true,
+		.attr = "lowest",
+	}, {
+		.reg = PMBUS_VIRT_READ_VOUT_MAX,
+		.update = true,
+		.attr = "highest",
+	}, {
+		.reg = PMBUS_VIRT_RESET_VOUT_HISTORY,
+		.attr = "reset_history",
+	}, {
+		.reg = PMBUS_MFR_VOUT_MIN,
+		.attr = "rated_min",
+	}, {
+		.reg = PMBUS_MFR_VOUT_MAX,
+		.attr = "rated_max",
+	},
+};
+
+static const struct pmbus_sensor_attr voltage_attributes[] = {
+	{
+		.reg = PMBUS_READ_VIN,
+		.class = PSC_VOLTAGE_IN,
+		.label = "vin",
+		.func = PMBUS_HAVE_VIN,
+		.sfunc = PMBUS_HAVE_STATUS_INPUT,
+		.sreg = PMBUS_STATUS_INPUT,
+		.gbit = PB_STATUS_VIN_UV,
+		.limit = vin_limit_attrs,
+		.nlimit = ARRAY_SIZE(vin_limit_attrs),
+	}, {
+		.reg = PMBUS_VIRT_READ_VMON,
+		.class = PSC_VOLTAGE_IN,
+		.label = "vmon",
+		.func = PMBUS_HAVE_VMON,
+		.sfunc = PMBUS_HAVE_STATUS_VMON,
+		.sreg = PMBUS_VIRT_STATUS_VMON,
+		.limit = vmon_limit_attrs,
+		.nlimit = ARRAY_SIZE(vmon_limit_attrs),
+	}, {
+		.reg = PMBUS_READ_VCAP,
+		.class = PSC_VOLTAGE_IN,
+		.label = "vcap",
+		.func = PMBUS_HAVE_VCAP,
+	}, {
+		.reg = PMBUS_READ_VOUT,
+		.class = PSC_VOLTAGE_OUT,
+		.label = "vout",
+		.paged = true,
+		.func = PMBUS_HAVE_VOUT,
+		.sfunc = PMBUS_HAVE_STATUS_VOUT,
+		.sreg = PMBUS_STATUS_VOUT,
+		.gbit = PB_STATUS_VOUT_OV,
+		.limit = vout_limit_attrs,
+		.nlimit = ARRAY_SIZE(vout_limit_attrs),
+	}
+};
+
+/* Current attributes */
+
+static const struct pmbus_limit_attr iin_limit_attrs[] = {
+	{
+		.reg = PMBUS_IIN_OC_WARN_LIMIT,
+		.attr = "max",
+		.alarm = "max_alarm",
+		.sbit = PB_IIN_OC_WARNING,
+	}, {
+		.reg = PMBUS_IIN_OC_FAULT_LIMIT,
+		.attr = "crit",
+		.alarm = "crit_alarm",
+		.sbit = PB_IIN_OC_FAULT,
+	}, {
+		.reg = PMBUS_VIRT_READ_IIN_AVG,
+		.update = true,
+		.attr = "average",
+	}, {
+		.reg = PMBUS_VIRT_READ_IIN_MIN,
+		.update = true,
+		.attr = "lowest",
+	}, {
+		.reg = PMBUS_VIRT_READ_IIN_MAX,
+		.update = true,
+		.attr = "highest",
+	}, {
+		.reg = PMBUS_VIRT_RESET_IIN_HISTORY,
+		.attr = "reset_history",
+	}, {
+		.reg = PMBUS_MFR_IIN_MAX,
+		.attr = "rated_max",
+	},
+};
+
+static const struct pmbus_limit_attr iout_limit_attrs[] = {
+	{
+		.reg = PMBUS_IOUT_OC_WARN_LIMIT,
+		.attr = "max",
+		.alarm = "max_alarm",
+		.sbit = PB_IOUT_OC_WARNING,
+	}, {
+		.reg = PMBUS_IOUT_UC_FAULT_LIMIT,
+		.attr = "lcrit",
+		.alarm = "lcrit_alarm",
+		.sbit = PB_IOUT_UC_FAULT,
+	}, {
+		.reg = PMBUS_IOUT_OC_FAULT_LIMIT,
+		.attr = "crit",
+		.alarm = "crit_alarm",
+		.sbit = PB_IOUT_OC_FAULT,
+	}, {
+		.reg = PMBUS_VIRT_READ_IOUT_AVG,
+		.update = true,
+		.attr = "average",
+	}, {
+		.reg = PMBUS_VIRT_READ_IOUT_MIN,
+		.update = true,
+		.attr = "lowest",
+	}, {
+		.reg = PMBUS_VIRT_READ_IOUT_MAX,
+		.update = true,
+		.attr = "highest",
+	}, {
+		.reg = PMBUS_VIRT_RESET_IOUT_HISTORY,
+		.attr = "reset_history",
+	}, {
+		.reg = PMBUS_MFR_IOUT_MAX,
+		.attr = "rated_max",
+	},
+};
+
+static const struct pmbus_sensor_attr current_attributes[] = {
+	{
+		.reg = PMBUS_READ_IIN,
+		.class = PSC_CURRENT_IN,
+		.label = "iin",
+		.func = PMBUS_HAVE_IIN,
+		.sfunc = PMBUS_HAVE_STATUS_INPUT,
+		.sreg = PMBUS_STATUS_INPUT,
+		.gbit = PB_STATUS_INPUT,
+		.limit = iin_limit_attrs,
+		.nlimit = ARRAY_SIZE(iin_limit_attrs),
+	}, {
+		.reg = PMBUS_READ_IOUT,
+		.class = PSC_CURRENT_OUT,
+		.label = "iout",
+		.paged = true,
+		.func = PMBUS_HAVE_IOUT,
+		.sfunc = PMBUS_HAVE_STATUS_IOUT,
+		.sreg = PMBUS_STATUS_IOUT,
+		.gbit = PB_STATUS_IOUT_OC,
+		.limit = iout_limit_attrs,
+		.nlimit = ARRAY_SIZE(iout_limit_attrs),
+	}
+};
+
+/* Power attributes */
+
+static const struct pmbus_limit_attr pin_limit_attrs[] = {
+	{
+		.reg = PMBUS_PIN_OP_WARN_LIMIT,
+		.attr = "max",
+		.alarm = "alarm",
+		.sbit = PB_PIN_OP_WARNING,
+	}, {
+		.reg = PMBUS_VIRT_READ_PIN_AVG,
+		.update = true,
+		.attr = "average",
+	}, {
+		.reg = PMBUS_VIRT_READ_PIN_MIN,
+		.update = true,
+		.attr = "input_lowest",
+	}, {
+		.reg = PMBUS_VIRT_READ_PIN_MAX,
+		.update = true,
+		.attr = "input_highest",
+	}, {
+		.reg = PMBUS_VIRT_RESET_PIN_HISTORY,
+		.attr = "reset_history",
+	}, {
+		.reg = PMBUS_MFR_PIN_MAX,
+		.attr = "rated_max",
+	},
+};
+
+static const struct pmbus_limit_attr pout_limit_attrs[] = {
+	{
+		.reg = PMBUS_POUT_MAX,
+		.attr = "cap",
+		.alarm = "cap_alarm",
+		.sbit = PB_POWER_LIMITING,
+	}, {
+		.reg = PMBUS_POUT_OP_WARN_LIMIT,
+		.attr = "max",
+		.alarm = "max_alarm",
+		.sbit = PB_POUT_OP_WARNING,
+	}, {
+		.reg = PMBUS_POUT_OP_FAULT_LIMIT,
+		.attr = "crit",
+		.alarm = "crit_alarm",
+		.sbit = PB_POUT_OP_FAULT,
+	}, {
+		.reg = PMBUS_VIRT_READ_POUT_AVG,
+		.update = true,
+		.attr = "average",
+	}, {
+		.reg = PMBUS_VIRT_READ_POUT_MIN,
+		.update = true,
+		.attr = "input_lowest",
+	}, {
+		.reg = PMBUS_VIRT_READ_POUT_MAX,
+		.update = true,
+		.attr = "input_highest",
+	}, {
+		.reg = PMBUS_VIRT_RESET_POUT_HISTORY,
+		.attr = "reset_history",
+	}, {
+		.reg = PMBUS_MFR_POUT_MAX,
+		.attr = "rated_max",
+	},
+};
+
+static const struct pmbus_sensor_attr power_attributes[] = {
+	{
+		.reg = PMBUS_READ_PIN,
+		.class = PSC_POWER,
+		.label = "pin",
+		.func = PMBUS_HAVE_PIN,
+		.sfunc = PMBUS_HAVE_STATUS_INPUT,
+		.sreg = PMBUS_STATUS_INPUT,
+		.gbit = PB_STATUS_INPUT,
+		.limit = pin_limit_attrs,
+		.nlimit = ARRAY_SIZE(pin_limit_attrs),
+	}, {
+		.reg = PMBUS_READ_POUT,
+		.class = PSC_POWER,
+		.label = "pout",
+		.paged = true,
+		.func = PMBUS_HAVE_POUT,
+		.sfunc = PMBUS_HAVE_STATUS_IOUT,
+		.sreg = PMBUS_STATUS_IOUT,
+		.limit = pout_limit_attrs,
+		.nlimit = ARRAY_SIZE(pout_limit_attrs),
+	}
+};
+
+/* Temperature atributes */
+
+static const struct pmbus_limit_attr temp_limit_attrs[] = {
+	{
+		.reg = PMBUS_UT_WARN_LIMIT,
+		.low = true,
+		.attr = "min",
+		.alarm = "min_alarm",
+		.sbit = PB_TEMP_UT_WARNING,
+	}, {
+		.reg = PMBUS_UT_FAULT_LIMIT,
+		.low = true,
+		.attr = "lcrit",
+		.alarm = "lcrit_alarm",
+		.sbit = PB_TEMP_UT_FAULT,
+	}, {
+		.reg = PMBUS_OT_WARN_LIMIT,
+		.attr = "max",
+		.alarm = "max_alarm",
+		.sbit = PB_TEMP_OT_WARNING,
+	}, {
+		.reg = PMBUS_OT_FAULT_LIMIT,
+		.attr = "crit",
+		.alarm = "crit_alarm",
+		.sbit = PB_TEMP_OT_FAULT,
+	}, {
+		.reg = PMBUS_VIRT_READ_TEMP_MIN,
+		.attr = "lowest",
+	}, {
+		.reg = PMBUS_VIRT_READ_TEMP_AVG,
+		.attr = "average",
+	}, {
+		.reg = PMBUS_VIRT_READ_TEMP_MAX,
+		.attr = "highest",
+	}, {
+		.reg = PMBUS_VIRT_RESET_TEMP_HISTORY,
+		.attr = "reset_history",
+	}, {
+		.reg = PMBUS_MFR_MAX_TEMP_1,
+		.attr = "rated_max",
+	},
+};
+
+static const struct pmbus_limit_attr temp_limit_attrs2[] = {
+	{
+		.reg = PMBUS_UT_WARN_LIMIT,
+		.low = true,
+		.attr = "min",
+		.alarm = "min_alarm",
+		.sbit = PB_TEMP_UT_WARNING,
+	}, {
+		.reg = PMBUS_UT_FAULT_LIMIT,
+		.low = true,
+		.attr = "lcrit",
+		.alarm = "lcrit_alarm",
+		.sbit = PB_TEMP_UT_FAULT,
+	}, {
+		.reg = PMBUS_OT_WARN_LIMIT,
+		.attr = "max",
+		.alarm = "max_alarm",
+		.sbit = PB_TEMP_OT_WARNING,
+	}, {
+		.reg = PMBUS_OT_FAULT_LIMIT,
+		.attr = "crit",
+		.alarm = "crit_alarm",
+		.sbit = PB_TEMP_OT_FAULT,
+	}, {
+		.reg = PMBUS_VIRT_READ_TEMP2_MIN,
+		.attr = "lowest",
+	}, {
+		.reg = PMBUS_VIRT_READ_TEMP2_AVG,
+		.attr = "average",
+	}, {
+		.reg = PMBUS_VIRT_READ_TEMP2_MAX,
+		.attr = "highest",
+	}, {
+		.reg = PMBUS_VIRT_RESET_TEMP2_HISTORY,
+		.attr = "reset_history",
+	}, {
+		.reg = PMBUS_MFR_MAX_TEMP_2,
+		.attr = "rated_max",
+	},
+};
+
+static const struct pmbus_limit_attr temp_limit_attrs3[] = {
+	{
+		.reg = PMBUS_UT_WARN_LIMIT,
+		.low = true,
+		.attr = "min",
+		.alarm = "min_alarm",
+		.sbit = PB_TEMP_UT_WARNING,
+	}, {
+		.reg = PMBUS_UT_FAULT_LIMIT,
+		.low = true,
+		.attr = "lcrit",
+		.alarm = "lcrit_alarm",
+		.sbit = PB_TEMP_UT_FAULT,
+	}, {
+		.reg = PMBUS_OT_WARN_LIMIT,
+		.attr = "max",
+		.alarm = "max_alarm",
+		.sbit = PB_TEMP_OT_WARNING,
+	}, {
+		.reg = PMBUS_OT_FAULT_LIMIT,
+		.attr = "crit",
+		.alarm = "crit_alarm",
+		.sbit = PB_TEMP_OT_FAULT,
+	}, {
+		.reg = PMBUS_MFR_MAX_TEMP_3,
+		.attr = "rated_max",
+	},
+};
+
+static const struct pmbus_sensor_attr temp_attributes[] = {
+	{
+		.reg = PMBUS_READ_TEMPERATURE_1,
+		.class = PSC_TEMPERATURE,
+		.paged = true,
+		.update = true,
+		.compare = true,
+		.func = PMBUS_HAVE_TEMP,
+		.sfunc = PMBUS_HAVE_STATUS_TEMP,
+		.sreg = PMBUS_STATUS_TEMPERATURE,
+		.gbit = PB_STATUS_TEMPERATURE,
+		.limit = temp_limit_attrs,
+		.nlimit = ARRAY_SIZE(temp_limit_attrs),
+	}, {
+		.reg = PMBUS_READ_TEMPERATURE_2,
+		.class = PSC_TEMPERATURE,
+		.paged = true,
+		.update = true,
+		.compare = true,
+		.func = PMBUS_HAVE_TEMP2,
+		.sfunc = PMBUS_HAVE_STATUS_TEMP,
+		.sreg = PMBUS_STATUS_TEMPERATURE,
+		.gbit = PB_STATUS_TEMPERATURE,
+		.limit = temp_limit_attrs2,
+		.nlimit = ARRAY_SIZE(temp_limit_attrs2),
+	}, {
+		.reg = PMBUS_READ_TEMPERATURE_3,
+		.class = PSC_TEMPERATURE,
+		.paged = true,
+		.update = true,
+		.compare = true,
+		.func = PMBUS_HAVE_TEMP3,
+		.sfunc = PMBUS_HAVE_STATUS_TEMP,
+		.sreg = PMBUS_STATUS_TEMPERATURE,
+		.gbit = PB_STATUS_TEMPERATURE,
+		.limit = temp_limit_attrs3,
+		.nlimit = ARRAY_SIZE(temp_limit_attrs3),
+	}
+};
+
+static const int pmbus_fan_registers[] = {
+	PMBUS_READ_FAN_SPEED_1,
+	PMBUS_READ_FAN_SPEED_2,
+	PMBUS_READ_FAN_SPEED_3,
+	PMBUS_READ_FAN_SPEED_4
+};
+
+static const int pmbus_fan_status_registers[] = {
+	PMBUS_STATUS_FAN_12,
+	PMBUS_STATUS_FAN_12,
+	PMBUS_STATUS_FAN_34,
+	PMBUS_STATUS_FAN_34
+};
+
+static const u32 pmbus_fan_flags[] = {
+	PMBUS_HAVE_FAN12,
+	PMBUS_HAVE_FAN12,
+	PMBUS_HAVE_FAN34,
+	PMBUS_HAVE_FAN34
+};
+
+static const u32 pmbus_fan_status_flags[] = {
+	PMBUS_HAVE_STATUS_FAN12,
+	PMBUS_HAVE_STATUS_FAN12,
+	PMBUS_HAVE_STATUS_FAN34,
+	PMBUS_HAVE_STATUS_FAN34
+};
+
+/* Fans */
+
+/* Precondition: FAN_CONFIG_x_y and FAN_COMMAND_x must exist for the fan ID */
+static int pmbus_add_fan_ctrl(struct i2c_client *client,
+		struct pmbus_data *data, int index, int page, int id,
+		u8 config)
+{
+	struct pmbus_sensor *sensor;
+
+	sensor = pmbus_add_sensor(data, "fan", "target", index, page,
+				  0xff, PMBUS_VIRT_FAN_TARGET_1 + id, PSC_FAN,
+				  false, false, true);
+
+	if (!sensor)
+		return -ENOMEM;
+
+	if (!((data->info->func[page] & PMBUS_HAVE_PWM12) ||
+			(data->info->func[page] & PMBUS_HAVE_PWM34)))
+		return 0;
+
+	sensor = pmbus_add_sensor(data, "pwm", NULL, index, page,
+				  0xff, PMBUS_VIRT_PWM_1 + id, PSC_PWM,
+				  false, false, true);
+
+	if (!sensor)
+		return -ENOMEM;
+
+	sensor = pmbus_add_sensor(data, "pwm", "enable", index, page,
+				  0xff, PMBUS_VIRT_PWM_ENABLE_1 + id, PSC_PWM,
+				  true, false, false);
+
+	if (!sensor)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static int pmbus_add_fan_attributes(struct i2c_client *client,
+				    struct pmbus_data *data)
+{
+	const struct pmbus_driver_info *info = data->info;
+	int index = 1;
+	int page;
+	int ret;
+
+	for (page = 0; page < info->pages; page++) {
+		int f;
+
+		for (f = 0; f < ARRAY_SIZE(pmbus_fan_registers); f++) {
+			int regval;
+
+			if (!(info->func[page] & pmbus_fan_flags[f]))
+				break;
+
+			if (!pmbus_check_word_register(client, page,
+						       pmbus_fan_registers[f]))
+				break;
+
+			/*
+			 * Skip fan if not installed.
+			 * Each fan configuration register covers multiple fans,
+			 * so we have to do some magic.
+			 */
+			regval = _pmbus_read_byte_data(client, page,
+				pmbus_fan_config_registers[f]);
+			if (regval < 0 ||
+			    (!(regval & (PB_FAN_1_INSTALLED >> ((f & 1) * 4)))))
+				continue;
+
+			if (pmbus_add_sensor(data, "fan", "input", index,
+					     page, 0xff, pmbus_fan_registers[f],
+					     PSC_FAN, true, true, true) == NULL)
+				return -ENOMEM;
+
+			/* Fan control */
+			if (pmbus_check_word_register(client, page,
+					pmbus_fan_command_registers[f])) {
+				ret = pmbus_add_fan_ctrl(client, data, index,
+							 page, f, regval);
+				if (ret < 0)
+					return ret;
+			}
+
+			/*
+			 * Each fan status register covers multiple fans,
+			 * so we have to do some magic.
+			 */
+			if ((info->func[page] & pmbus_fan_status_flags[f]) &&
+			    pmbus_check_byte_register(client,
+					page, pmbus_fan_status_registers[f])) {
+				int reg;
+
+				if (f > 1)	/* fan 3, 4 */
+					reg = PMBUS_STATUS_FAN_34;
+				else
+					reg = PMBUS_STATUS_FAN_12;
+				ret = pmbus_add_boolean(data, "fan",
+					"alarm", index, NULL, NULL, page, reg,
+					PB_FAN_FAN1_WARNING >> (f & 1));
+				if (ret)
+					return ret;
+				ret = pmbus_add_boolean(data, "fan",
+					"fault", index, NULL, NULL, page, reg,
+					PB_FAN_FAN1_FAULT >> (f & 1));
+				if (ret)
+					return ret;
+			}
+			index++;
+		}
+	}
+	return 0;
+}
+
+struct pmbus_samples_attr {
+	int reg;
+	char *name;
+};
+
+struct pmbus_samples_reg {
+	int page;
+	struct pmbus_samples_attr *attr;
+	struct device_attribute dev_attr;
+};
+
+static struct pmbus_samples_attr pmbus_samples_registers[] = {
+	{
+		.reg = PMBUS_VIRT_SAMPLES,
+		.name = "samples",
+	}, {
+		.reg = PMBUS_VIRT_IN_SAMPLES,
+		.name = "in_samples",
+	}, {
+		.reg = PMBUS_VIRT_CURR_SAMPLES,
+		.name = "curr_samples",
+	}, {
+		.reg = PMBUS_VIRT_POWER_SAMPLES,
+		.name = "power_samples",
+	}, {
+		.reg = PMBUS_VIRT_TEMP_SAMPLES,
+		.name = "temp_samples",
+	}
+};
+
+#define to_samples_reg(x) container_of(x, struct pmbus_samples_reg, dev_attr)
+
+static ssize_t pmbus_show_samples(struct device *dev,
+				  struct device_attribute *devattr, char *buf)
+{
+	int val;
+	struct i2c_client *client = to_i2c_client(dev->parent);
+	struct pmbus_samples_reg *reg = to_samples_reg(devattr);
+	struct pmbus_data *data = i2c_get_clientdata(client);
+
+	mutex_lock(&data->update_lock);
+	val = _pmbus_read_word_data(client, reg->page, 0xff, reg->attr->reg);
+	mutex_unlock(&data->update_lock);
+	if (val < 0)
+		return val;
+
+	return sysfs_emit(buf, "%d\n", val);
+}
+
+static ssize_t pmbus_set_samples(struct device *dev,
+				 struct device_attribute *devattr,
+				 const char *buf, size_t count)
+{
+	int ret;
+	long val;
+	struct i2c_client *client = to_i2c_client(dev->parent);
+	struct pmbus_samples_reg *reg = to_samples_reg(devattr);
+	struct pmbus_data *data = i2c_get_clientdata(client);
+
+	if (kstrtol(buf, 0, &val) < 0)
+		return -EINVAL;
+
+	mutex_lock(&data->update_lock);
+	ret = _pmbus_write_word_data(client, reg->page, reg->attr->reg, val);
+	mutex_unlock(&data->update_lock);
+
+	return ret ? : count;
+}
+
+static int pmbus_add_samples_attr(struct pmbus_data *data, int page,
+				  struct pmbus_samples_attr *attr)
+{
+	struct pmbus_samples_reg *reg;
+
+	reg = devm_kzalloc(data->dev, sizeof(*reg), GFP_KERNEL);
+	if (!reg)
+		return -ENOMEM;
+
+	reg->attr = attr;
+	reg->page = page;
+
+	pmbus_dev_attr_init(&reg->dev_attr, attr->name, 0644,
+			    pmbus_show_samples, pmbus_set_samples);
+
+	return pmbus_add_attribute(data, &reg->dev_attr.attr);
+}
+
+static int pmbus_add_samples_attributes(struct i2c_client *client,
+					struct pmbus_data *data)
+{
+	const struct pmbus_driver_info *info = data->info;
+	int s;
+
+	if (!(info->func[0] & PMBUS_HAVE_SAMPLES))
+		return 0;
+
+	for (s = 0; s < ARRAY_SIZE(pmbus_samples_registers); s++) {
+		struct pmbus_samples_attr *attr;
+		int ret;
+
+		attr = &pmbus_samples_registers[s];
+		if (!pmbus_check_word_register(client, 0, attr->reg))
+			continue;
+
+		ret = pmbus_add_samples_attr(data, 0, attr);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int pmbus_find_attributes(struct i2c_client *client,
+				 struct pmbus_data *data)
+{
+	int ret;
+
+	/* Voltage sensors */
+	ret = pmbus_add_sensor_attrs(client, data, "in", voltage_attributes,
+				     ARRAY_SIZE(voltage_attributes));
+	if (ret)
+		return ret;
+
+	/* Current sensors */
+	ret = pmbus_add_sensor_attrs(client, data, "curr", current_attributes,
+				     ARRAY_SIZE(current_attributes));
+	if (ret)
+		return ret;
+
+	/* Power sensors */
+	ret = pmbus_add_sensor_attrs(client, data, "power", power_attributes,
+				     ARRAY_SIZE(power_attributes));
+	if (ret)
+		return ret;
+
+	/* Temperature sensors */
+	ret = pmbus_add_sensor_attrs(client, data, "temp", temp_attributes,
+				     ARRAY_SIZE(temp_attributes));
+	if (ret)
+		return ret;
+
+	/* Fans */
+	ret = pmbus_add_fan_attributes(client, data);
+	if (ret)
+		return ret;
+
+	ret = pmbus_add_samples_attributes(client, data);
+	return ret;
+}
+
+/*
+ * The pmbus_class_attr_map structure maps one sensor class to
+ * it's corresponding sensor attributes array.
+ */
+struct pmbus_class_attr_map {
+	enum pmbus_sensor_classes class;
+	int nattr;
+	const struct pmbus_sensor_attr *attr;
+};
+
+static const struct pmbus_class_attr_map class_attr_map[] = {
+	{
+		.class = PSC_VOLTAGE_IN,
+		.attr = voltage_attributes,
+		.nattr = ARRAY_SIZE(voltage_attributes),
+	}, {
+		.class = PSC_VOLTAGE_OUT,
+		.attr = voltage_attributes,
+		.nattr = ARRAY_SIZE(voltage_attributes),
+	}, {
+		.class = PSC_CURRENT_IN,
+		.attr = current_attributes,
+		.nattr = ARRAY_SIZE(current_attributes),
+	}, {
+		.class = PSC_CURRENT_OUT,
+		.attr = current_attributes,
+		.nattr = ARRAY_SIZE(current_attributes),
+	}, {
+		.class = PSC_POWER,
+		.attr = power_attributes,
+		.nattr = ARRAY_SIZE(power_attributes),
+	}, {
+		.class = PSC_TEMPERATURE,
+		.attr = temp_attributes,
+		.nattr = ARRAY_SIZE(temp_attributes),
+	}
+};
+
+/*
+ * Read the coefficients for direct mode.
+ */
+static int pmbus_read_coefficients(struct i2c_client *client,
+				   struct pmbus_driver_info *info,
+				   const struct pmbus_sensor_attr *attr)
+{
+	int rv;
+	union i2c_smbus_data data;
+	enum pmbus_sensor_classes class = attr->class;
+	s8 R;
+	s16 m, b;
+
+	data.block[0] = 2;
+	data.block[1] = attr->reg;
+	data.block[2] = 0x01;
+
+	rv = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+			    I2C_SMBUS_WRITE, PMBUS_COEFFICIENTS,
+			    I2C_SMBUS_BLOCK_PROC_CALL, &data);
+
+	if (rv < 0)
+		return rv;
+
+	if (data.block[0] != 5)
+		return -EIO;
+
+	m = data.block[1] | (data.block[2] << 8);
+	b = data.block[3] | (data.block[4] << 8);
+	R = data.block[5];
+	info->m[class] = m;
+	info->b[class] = b;
+	info->R[class] = R;
+
+	return rv;
+}
+
+static int pmbus_init_coefficients(struct i2c_client *client,
+				   struct pmbus_driver_info *info)
+{
+	int i, n, ret = -EINVAL;
+	const struct pmbus_class_attr_map *map;
+	const struct pmbus_sensor_attr *attr;
+
+	for (i = 0; i < ARRAY_SIZE(class_attr_map); i++) {
+		map = &class_attr_map[i];
+		if (info->format[map->class] != direct)
+			continue;
+		for (n = 0; n < map->nattr; n++) {
+			attr = &map->attr[n];
+			if (map->class != attr->class)
+				continue;
+			ret = pmbus_read_coefficients(client, info, attr);
+			if (ret >= 0)
+				break;
+		}
+		if (ret < 0) {
+			dev_err(&client->dev,
+				"No coefficients found for sensor class %d\n",
+				map->class);
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * Identify chip parameters.
+ * This function is called for all chips.
+ */
+static int pmbus_identify_common(struct i2c_client *client,
+				 struct pmbus_data *data, int page)
+{
+	int vout_mode = -1;
+
+	if (pmbus_check_byte_register(client, page, PMBUS_VOUT_MODE))
+		vout_mode = _pmbus_read_byte_data(client, page,
+						  PMBUS_VOUT_MODE);
+	if (vout_mode >= 0 && vout_mode != 0xff) {
+		/*
+		 * Not all chips support the VOUT_MODE command,
+		 * so a failure to read it is not an error.
+		 */
+		switch (vout_mode >> 5) {
+		case 0:	/* linear mode      */
+			if (data->info->format[PSC_VOLTAGE_OUT] != linear)
+				return -ENODEV;
+
+			data->exponent[page] = ((s8)(vout_mode << 3)) >> 3;
+			break;
+		case 1: /* VID mode         */
+			if (data->info->format[PSC_VOLTAGE_OUT] != vid)
+				return -ENODEV;
+			break;
+		case 2:	/* direct mode      */
+			if (data->info->format[PSC_VOLTAGE_OUT] != direct)
+				return -ENODEV;
+			break;
+		case 3:	/* ieee 754 half precision */
+			if (data->info->format[PSC_VOLTAGE_OUT] != ieee754)
+				return -ENODEV;
+			break;
+		default:
+			return -ENODEV;
+		}
+	}
+
+	pmbus_clear_fault_page(client, page);
+	return 0;
+}
+
+static int pmbus_read_status_byte(struct i2c_client *client, int page)
+{
+	return _pmbus_read_byte_data(client, page, PMBUS_STATUS_BYTE);
+}
+
+static int pmbus_read_status_word(struct i2c_client *client, int page)
+{
+	return _pmbus_read_word_data(client, page, 0xff, PMBUS_STATUS_WORD);
+}
+
+/* PEC attribute support */
+
+static ssize_t pec_show(struct device *dev, struct device_attribute *dummy,
+			char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	return sysfs_emit(buf, "%d\n", !!(client->flags & I2C_CLIENT_PEC));
+}
+
+static ssize_t pec_store(struct device *dev, struct device_attribute *dummy,
+			 const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	bool enable;
+	int err;
+
+	err = kstrtobool(buf, &enable);
+	if (err < 0)
+		return err;
+
+	if (enable)
+		client->flags |= I2C_CLIENT_PEC;
+	else
+		client->flags &= ~I2C_CLIENT_PEC;
+
+	return count;
+}
+
+static DEVICE_ATTR_RW(pec);
+
+static void pmbus_remove_pec(void *dev)
+{
+	device_remove_file(dev, &dev_attr_pec);
+}
+
+static int pmbus_init_common(struct i2c_client *client, struct pmbus_data *data,
+			     struct pmbus_driver_info *info)
+{
+	struct device *dev = &client->dev;
+	int page, ret;
+
+	/*
+	 * Figure out if PEC is enabled before accessing any other register.
+	 * Make sure PEC is disabled, will be enabled later if needed.
+	 */
+	client->flags &= ~I2C_CLIENT_PEC;
+
+	/* Enable PEC if the controller and bus supports it */
+	if (!(data->flags & PMBUS_NO_CAPABILITY)) {
+		ret = i2c_smbus_read_byte_data(client, PMBUS_CAPABILITY);
+		if (ret >= 0 && (ret & PB_CAPABILITY_ERROR_CHECK)) {
+			if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_PEC))
+				client->flags |= I2C_CLIENT_PEC;
+		}
+	}
+
+	/*
+	 * Some PMBus chips don't support PMBUS_STATUS_WORD, so try
+	 * to use PMBUS_STATUS_BYTE instead if that is the case.
+	 * Bail out if both registers are not supported.
+	 */
+	data->read_status = pmbus_read_status_word;
+	ret = i2c_smbus_read_word_data(client, PMBUS_STATUS_WORD);
+	if (ret < 0 || ret == 0xffff) {
+		data->read_status = pmbus_read_status_byte;
+		ret = i2c_smbus_read_byte_data(client, PMBUS_STATUS_BYTE);
+		if (ret < 0 || ret == 0xff) {
+			dev_err(dev, "PMBus status register not found\n");
+			return -ENODEV;
+		}
+	} else {
+		data->has_status_word = true;
+	}
+
+	/*
+	 * Check if the chip is write protected. If it is, we can not clear
+	 * faults, and we should not try it. Also, in that case, writes into
+	 * limit registers need to be disabled.
+	 */
+	if (!(data->flags & PMBUS_NO_WRITE_PROTECT)) {
+		ret = i2c_smbus_read_byte_data(client, PMBUS_WRITE_PROTECT);
+		if (ret > 0 && (ret & PB_WP_ANY))
+			data->flags |= PMBUS_WRITE_PROTECTED | PMBUS_SKIP_STATUS_CHECK;
+	}
+
+	if (data->info->pages)
+		pmbus_clear_faults(client);
+	else
+		pmbus_clear_fault_page(client, -1);
+
+	if (info->identify) {
+		ret = (*info->identify)(client, info);
+		if (ret < 0) {
+			dev_err(dev, "Chip identification failed\n");
+			return ret;
+		}
+	}
+
+	if (info->pages <= 0 || info->pages > PMBUS_PAGES) {
+		dev_err(dev, "Bad number of PMBus pages: %d\n", info->pages);
+		return -ENODEV;
+	}
+
+	for (page = 0; page < info->pages; page++) {
+		ret = pmbus_identify_common(client, data, page);
+		if (ret < 0) {
+			dev_err(dev, "Failed to identify chip capabilities\n");
+			return ret;
+		}
+	}
+
+	if (data->flags & PMBUS_USE_COEFFICIENTS_CMD) {
+		if (!i2c_check_functionality(client->adapter,
+					     I2C_FUNC_SMBUS_BLOCK_PROC_CALL))
+			return -ENODEV;
+
+		ret = pmbus_init_coefficients(client, info);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (client->flags & I2C_CLIENT_PEC) {
+		/*
+		 * If I2C_CLIENT_PEC is set here, both the I2C adapter and the
+		 * chip support PEC. Add 'pec' attribute to client device to let
+		 * the user control it.
+		 */
+		ret = device_create_file(dev, &dev_attr_pec);
+		if (ret)
+			return ret;
+		ret = devm_add_action_or_reset(dev, pmbus_remove_pec, dev);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+#if IS_ENABLED(CONFIG_REGULATOR)
+static int pmbus_regulator_is_enabled(struct regulator_dev *rdev)
+{
+	struct device *dev = rdev_get_dev(rdev);
+	struct i2c_client *client = to_i2c_client(dev->parent);
+	struct pmbus_data *data = i2c_get_clientdata(client);
+	u8 page = rdev_get_id(rdev);
+	int ret;
+
+	mutex_lock(&data->update_lock);
+	ret = _pmbus_read_byte_data(client, page, PMBUS_OPERATION);
+	mutex_unlock(&data->update_lock);
+
+	if (ret < 0)
+		return ret;
+
+	return !!(ret & PB_OPERATION_CONTROL_ON);
+}
+
+static int _pmbus_regulator_on_off(struct regulator_dev *rdev, bool enable)
+{
+	struct device *dev = rdev_get_dev(rdev);
+	struct i2c_client *client = to_i2c_client(dev->parent);
+	struct pmbus_data *data = i2c_get_clientdata(client);
+	u8 page = rdev_get_id(rdev);
+	int ret;
+
+	mutex_lock(&data->update_lock);
+	ret = pmbus_update_byte_data(client, page, PMBUS_OPERATION,
+				     PB_OPERATION_CONTROL_ON,
+				     enable ? PB_OPERATION_CONTROL_ON : 0);
+	mutex_unlock(&data->update_lock);
+
+	return ret;
+}
+
+static int pmbus_regulator_enable(struct regulator_dev *rdev)
+{
+	return _pmbus_regulator_on_off(rdev, 1);
+}
+
+static int pmbus_regulator_disable(struct regulator_dev *rdev)
+{
+	return _pmbus_regulator_on_off(rdev, 0);
+}
+
+/* A PMBus status flag and the corresponding REGULATOR_ERROR_* flag */
+struct pmbus_regulator_status_assoc {
+	int pflag, rflag;
+};
+
+/* PMBus->regulator bit mappings for a PMBus status register */
+struct pmbus_regulator_status_category {
+	int func;
+	int reg;
+	const struct pmbus_regulator_status_assoc *bits; /* zero-terminated */
+};
+
+static const struct pmbus_regulator_status_category pmbus_regulator_flag_map[] = {
+	{
+		.func = PMBUS_HAVE_STATUS_VOUT,
+		.reg = PMBUS_STATUS_VOUT,
+		.bits = (const struct pmbus_regulator_status_assoc[]) {
+			{ PB_VOLTAGE_UV_WARNING, REGULATOR_ERROR_UNDER_VOLTAGE_WARN },
+			{ PB_VOLTAGE_UV_FAULT,   REGULATOR_ERROR_UNDER_VOLTAGE },
+			{ PB_VOLTAGE_OV_WARNING, REGULATOR_ERROR_OVER_VOLTAGE_WARN },
+			{ PB_VOLTAGE_OV_FAULT,   REGULATOR_ERROR_REGULATION_OUT },
+			{ },
+		},
+	}, {
+		.func = PMBUS_HAVE_STATUS_IOUT,
+		.reg = PMBUS_STATUS_IOUT,
+		.bits = (const struct pmbus_regulator_status_assoc[]) {
+			{ PB_IOUT_OC_WARNING,    REGULATOR_ERROR_OVER_CURRENT_WARN },
+			{ PB_IOUT_OC_FAULT,      REGULATOR_ERROR_OVER_CURRENT },
+			{ PB_IOUT_OC_LV_FAULT,   REGULATOR_ERROR_OVER_CURRENT },
+			{ },
+		},
+	}, {
+		.func = PMBUS_HAVE_STATUS_TEMP,
+		.reg = PMBUS_STATUS_TEMPERATURE,
+		.bits = (const struct pmbus_regulator_status_assoc[]) {
+			{ PB_TEMP_OT_WARNING,    REGULATOR_ERROR_OVER_TEMP_WARN },
+			{ PB_TEMP_OT_FAULT,      REGULATOR_ERROR_OVER_TEMP },
+			{ },
+		},
+	},
+};
+
+static int pmbus_regulator_get_error_flags(struct regulator_dev *rdev, unsigned int *flags)
+{
+	int i, status;
+	const struct pmbus_regulator_status_category *cat;
+	const struct pmbus_regulator_status_assoc *bit;
+	struct device *dev = rdev_get_dev(rdev);
+	struct i2c_client *client = to_i2c_client(dev->parent);
+	struct pmbus_data *data = i2c_get_clientdata(client);
+	u8 page = rdev_get_id(rdev);
+	int func = data->info->func[page];
+
+	*flags = 0;
+
+	mutex_lock(&data->update_lock);
+
+	for (i = 0; i < ARRAY_SIZE(pmbus_regulator_flag_map); i++) {
+		cat = &pmbus_regulator_flag_map[i];
+		if (!(func & cat->func))
+			continue;
+
+		status = _pmbus_read_byte_data(client, page, cat->reg);
+		if (status < 0) {
+			mutex_unlock(&data->update_lock);
+			return status;
+		}
+
+		for (bit = cat->bits; bit->pflag; bit++) {
+			if (status & bit->pflag)
+				*flags |= bit->rflag;
+		}
+	}
+
+	/*
+	 * Map what bits of STATUS_{WORD,BYTE} we can to REGULATOR_ERROR_*
+	 * bits.  Some of the other bits are tempting (especially for cases
+	 * where we don't have the relevant PMBUS_HAVE_STATUS_*
+	 * functionality), but there's an unfortunate ambiguity in that
+	 * they're defined as indicating a fault *or* a warning, so we can't
+	 * easily determine whether to report REGULATOR_ERROR_<foo> or
+	 * REGULATOR_ERROR_<foo>_WARN.
+	 */
+	status = pmbus_get_status(client, page, PMBUS_STATUS_WORD);
+	mutex_unlock(&data->update_lock);
+	if (status < 0)
+		return status;
+
+	if (pmbus_regulator_is_enabled(rdev) && (status & PB_STATUS_OFF))
+		*flags |= REGULATOR_ERROR_FAIL;
+
+	/*
+	 * Unlike most other status bits, PB_STATUS_{IOUT_OC,VOUT_OV} are
+	 * defined strictly as fault indicators (not warnings).
+	 */
+	if (status & PB_STATUS_IOUT_OC)
+		*flags |= REGULATOR_ERROR_OVER_CURRENT;
+	if (status & PB_STATUS_VOUT_OV)
+		*flags |= REGULATOR_ERROR_REGULATION_OUT;
+
+	/*
+	 * If we haven't discovered any thermal faults or warnings via
+	 * PMBUS_STATUS_TEMPERATURE, map PB_STATUS_TEMPERATURE to a warning as
+	 * a (conservative) best-effort interpretation.
+	 */
+	if (!(*flags & (REGULATOR_ERROR_OVER_TEMP | REGULATOR_ERROR_OVER_TEMP_WARN)) &&
+	    (status & PB_STATUS_TEMPERATURE))
+		*flags |= REGULATOR_ERROR_OVER_TEMP_WARN;
+
+	return 0;
+}
+
+static int pmbus_regulator_get_low_margin(struct i2c_client *client, int page)
+{
+	struct pmbus_data *data = i2c_get_clientdata(client);
+	struct pmbus_sensor s = {
+		.page = page,
+		.class = PSC_VOLTAGE_OUT,
+		.convert = true,
+		.data = -1,
+	};
+
+	if (data->vout_low[page] < 0) {
+		if (pmbus_check_word_register(client, page, PMBUS_MFR_VOUT_MIN))
+			s.data = _pmbus_read_word_data(client, page, 0xff,
+						       PMBUS_MFR_VOUT_MIN);
+		if (s.data < 0) {
+			s.data = _pmbus_read_word_data(client, page, 0xff,
+						       PMBUS_VOUT_MARGIN_LOW);
+			if (s.data < 0)
+				return s.data;
+		}
+		data->vout_low[page] = pmbus_reg2data(data, &s);
+	}
+
+	return data->vout_low[page];
+}
+
+static int pmbus_regulator_get_high_margin(struct i2c_client *client, int page)
+{
+	struct pmbus_data *data = i2c_get_clientdata(client);
+	struct pmbus_sensor s = {
+		.page = page,
+		.class = PSC_VOLTAGE_OUT,
+		.convert = true,
+		.data = -1,
+	};
+
+	if (data->vout_high[page] < 0) {
+		if (pmbus_check_word_register(client, page, PMBUS_MFR_VOUT_MAX))
+			s.data = _pmbus_read_word_data(client, page, 0xff,
+						       PMBUS_MFR_VOUT_MAX);
+		if (s.data < 0) {
+			s.data = _pmbus_read_word_data(client, page, 0xff,
+						       PMBUS_VOUT_MARGIN_HIGH);
+			if (s.data < 0)
+				return s.data;
+		}
+		data->vout_high[page] = pmbus_reg2data(data, &s);
+	}
+
+	return data->vout_high[page];
+}
+
+static int pmbus_regulator_get_voltage(struct regulator_dev *rdev)
+{
+	struct device *dev = rdev_get_dev(rdev);
+	struct i2c_client *client = to_i2c_client(dev->parent);
+	struct pmbus_data *data = i2c_get_clientdata(client);
+	struct pmbus_sensor s = {
+		.page = rdev_get_id(rdev),
+		.class = PSC_VOLTAGE_OUT,
+		.convert = true,
+	};
+
+	s.data = _pmbus_read_word_data(client, s.page, 0xff, PMBUS_READ_VOUT);
+	if (s.data < 0)
+		return s.data;
+
+	return (int)pmbus_reg2data(data, &s) * 1000; /* unit is uV */
+}
+
+static int pmbus_regulator_set_voltage(struct regulator_dev *rdev, int min_uv,
+				       int max_uv, unsigned int *selector)
+{
+	struct device *dev = rdev_get_dev(rdev);
+	struct i2c_client *client = to_i2c_client(dev->parent);
+	struct pmbus_data *data = i2c_get_clientdata(client);
+	struct pmbus_sensor s = {
+		.page = rdev_get_id(rdev),
+		.class = PSC_VOLTAGE_OUT,
+		.convert = true,
+		.data = -1,
+	};
+	int val = DIV_ROUND_CLOSEST(min_uv, 1000); /* convert to mV */
+	int low, high;
+
+	*selector = 0;
+
+	low = pmbus_regulator_get_low_margin(client, s.page);
+	if (low < 0)
+		return low;
+
+	high = pmbus_regulator_get_high_margin(client, s.page);
+	if (high < 0)
+		return high;
+
+	/* Make sure we are within margins */
+	if (low > val)
+		val = low;
+	if (high < val)
+		val = high;
+
+	val = pmbus_data2reg(data, &s, val);
+
+	return _pmbus_write_word_data(client, s.page, PMBUS_VOUT_COMMAND, (u16)val);
+}
+
+static int pmbus_regulator_list_voltage(struct regulator_dev *rdev,
+					 unsigned int selector)
+{
+	struct device *dev = rdev_get_dev(rdev);
+	struct i2c_client *client = to_i2c_client(dev->parent);
+	int val, low, high;
+
+	if (selector >= rdev->desc->n_voltages ||
+	    selector < rdev->desc->linear_min_sel)
+		return -EINVAL;
+
+	selector -= rdev->desc->linear_min_sel;
+	val = DIV_ROUND_CLOSEST(rdev->desc->min_uV +
+				(rdev->desc->uV_step * selector), 1000); /* convert to mV */
+
+	low = pmbus_regulator_get_low_margin(client, rdev_get_id(rdev));
+	if (low < 0)
+		return low;
+
+	high = pmbus_regulator_get_high_margin(client, rdev_get_id(rdev));
+	if (high < 0)
+		return high;
+
+	if (val >= low && val <= high)
+		return val * 1000; /* unit is uV */
+
+	return 0;
+}
+
+const struct regulator_ops pmbus_regulator_ops = {
+	.enable = pmbus_regulator_enable,
+	.disable = pmbus_regulator_disable,
+	.is_enabled = pmbus_regulator_is_enabled,
+	.get_error_flags = pmbus_regulator_get_error_flags,
+	.get_voltage = pmbus_regulator_get_voltage,
+	.set_voltage = pmbus_regulator_set_voltage,
+	.list_voltage = pmbus_regulator_list_voltage,
+};
+EXPORT_SYMBOL_NS_GPL(pmbus_regulator_ops, PMBUS);
+
+static int pmbus_regulator_register(struct pmbus_data *data)
+{
+	struct device *dev = data->dev;
+	const struct pmbus_driver_info *info = data->info;
+	const struct pmbus_platform_data *pdata = dev_get_platdata(dev);
+	struct regulator_dev *rdev;
+	int i;
+
+	for (i = 0; i < info->num_regulators; i++) {
+		struct regulator_config config = { };
+
+		config.dev = dev;
+		config.driver_data = data;
+
+		if (pdata && pdata->reg_init_data)
+			config.init_data = &pdata->reg_init_data[i];
+
+		rdev = devm_regulator_register(dev, &info->reg_desc[i],
+					       &config);
+		if (IS_ERR(rdev))
+			return dev_err_probe(dev, PTR_ERR(rdev),
+					     "Failed to register %s regulator\n",
+					     info->reg_desc[i].name);
+	}
+
+	return 0;
+}
+#else
+static int pmbus_regulator_register(struct pmbus_data *data)
+{
+	return 0;
+}
+#endif
+
+static struct dentry *pmbus_debugfs_dir;	/* pmbus debugfs directory */
+
+#if IS_ENABLED(CONFIG_DEBUG_FS)
+static int pmbus_debugfs_get(void *data, u64 *val)
+{
+	int rc;
+	struct pmbus_debugfs_entry *entry = data;
+
+	rc = _pmbus_read_byte_data(entry->client, entry->page, entry->reg);
+	if (rc < 0)
+		return rc;
+
+	*val = rc;
+
+	return 0;
+}
+DEFINE_DEBUGFS_ATTRIBUTE(pmbus_debugfs_ops, pmbus_debugfs_get, NULL,
+			 "0x%02llx\n");
+
+static int pmbus_debugfs_get_status(void *data, u64 *val)
+{
+	int rc;
+	struct pmbus_debugfs_entry *entry = data;
+	struct pmbus_data *pdata = i2c_get_clientdata(entry->client);
+
+	rc = pdata->read_status(entry->client, entry->page);
+	if (rc < 0)
+		return rc;
+
+	*val = rc;
+
+	return 0;
+}
+DEFINE_DEBUGFS_ATTRIBUTE(pmbus_debugfs_ops_status, pmbus_debugfs_get_status,
+			 NULL, "0x%04llx\n");
+
+static ssize_t pmbus_debugfs_mfr_read(struct file *file, char __user *buf,
+				       size_t count, loff_t *ppos)
+{
+	int rc;
+	struct pmbus_debugfs_entry *entry = file->private_data;
+	char data[I2C_SMBUS_BLOCK_MAX + 2] = { 0 };
+
+	rc = pmbus_read_block_data(entry->client, entry->page, entry->reg,
+				   data);
+	if (rc < 0)
+		return rc;
+
+	/* Add newline at the end of a read data */
+	data[rc] = '\n';
+
+	/* Include newline into the length */
+	rc += 1;
+
+	return simple_read_from_buffer(buf, count, ppos, data, rc);
+}
+
+static const struct file_operations pmbus_debugfs_ops_mfr = {
+	.llseek = noop_llseek,
+	.read = pmbus_debugfs_mfr_read,
+	.write = NULL,
+	.open = simple_open,
+};
+
+static void pmbus_remove_debugfs(void *data)
+{
+	struct dentry *entry = data;
+
+	debugfs_remove_recursive(entry);
+}
+
+static int pmbus_init_debugfs(struct i2c_client *client,
+			      struct pmbus_data *data)
+{
+	int i, idx = 0;
+	char name[PMBUS_NAME_SIZE];
+	struct pmbus_debugfs_entry *entries;
+
+	if (!pmbus_debugfs_dir)
+		return -ENODEV;
+
+	/*
+	 * Create the debugfs directory for this device. Use the hwmon device
+	 * name to avoid conflicts (hwmon numbers are globally unique).
+	 */
+	data->debugfs = debugfs_create_dir(dev_name(data->hwmon_dev),
+					   pmbus_debugfs_dir);
+	if (IS_ERR_OR_NULL(data->debugfs)) {
+		data->debugfs = NULL;
+		return -ENODEV;
+	}
+
+	/*
+	 * Allocate the max possible entries we need.
+	 * 6 entries device-specific
+	 * 10 entries page-specific
+	 */
+	entries = devm_kcalloc(data->dev,
+			       6 + data->info->pages * 10, sizeof(*entries),
+			       GFP_KERNEL);
+	if (!entries)
+		return -ENOMEM;
+
+	/*
+	 * Add device-specific entries.
+	 * Please note that the PMBUS standard allows all registers to be
+	 * page-specific.
+	 * To reduce the number of debugfs entries for devices with many pages
+	 * assume that values of the following registers are the same for all
+	 * pages and report values only for page 0.
+	 */
+	if (pmbus_check_block_register(client, 0, PMBUS_MFR_ID)) {
+		entries[idx].client = client;
+		entries[idx].page = 0;
+		entries[idx].reg = PMBUS_MFR_ID;
+		debugfs_create_file("mfr_id", 0444, data->debugfs,
+				    &entries[idx++],
+				    &pmbus_debugfs_ops_mfr);
+	}
+
+	if (pmbus_check_block_register(client, 0, PMBUS_MFR_MODEL)) {
+		entries[idx].client = client;
+		entries[idx].page = 0;
+		entries[idx].reg = PMBUS_MFR_MODEL;
+		debugfs_create_file("mfr_model", 0444, data->debugfs,
+				    &entries[idx++],
+				    &pmbus_debugfs_ops_mfr);
+	}
+
+	if (pmbus_check_block_register(client, 0, PMBUS_MFR_REVISION)) {
+		entries[idx].client = client;
+		entries[idx].page = 0;
+		entries[idx].reg = PMBUS_MFR_REVISION;
+		debugfs_create_file("mfr_revision", 0444, data->debugfs,
+				    &entries[idx++],
+				    &pmbus_debugfs_ops_mfr);
+	}
+
+	if (pmbus_check_block_register(client, 0, PMBUS_MFR_LOCATION)) {
+		entries[idx].client = client;
+		entries[idx].page = 0;
+		entries[idx].reg = PMBUS_MFR_LOCATION;
+		debugfs_create_file("mfr_location", 0444, data->debugfs,
+				    &entries[idx++],
+				    &pmbus_debugfs_ops_mfr);
+	}
+
+	if (pmbus_check_block_register(client, 0, PMBUS_MFR_DATE)) {
+		entries[idx].client = client;
+		entries[idx].page = 0;
+		entries[idx].reg = PMBUS_MFR_DATE;
+		debugfs_create_file("mfr_date", 0444, data->debugfs,
+				    &entries[idx++],
+				    &pmbus_debugfs_ops_mfr);
+	}
+
+	if (pmbus_check_block_register(client, 0, PMBUS_MFR_SERIAL)) {
+		entries[idx].client = client;
+		entries[idx].page = 0;
+		entries[idx].reg = PMBUS_MFR_SERIAL;
+		debugfs_create_file("mfr_serial", 0444, data->debugfs,
+				    &entries[idx++],
+				    &pmbus_debugfs_ops_mfr);
+	}
+
+	/* Add page specific entries */
+	for (i = 0; i < data->info->pages; ++i) {
+		/* Check accessibility of status register if it's not page 0 */
+		if (!i || pmbus_check_status_register(client, i)) {
+			/* No need to set reg as we have special read op. */
+			entries[idx].client = client;
+			entries[idx].page = i;
+			scnprintf(name, PMBUS_NAME_SIZE, "status%d", i);
+			debugfs_create_file(name, 0444, data->debugfs,
+					    &entries[idx++],
+					    &pmbus_debugfs_ops_status);
+		}
+
+		if (data->info->func[i] & PMBUS_HAVE_STATUS_VOUT) {
+			entries[idx].client = client;
+			entries[idx].page = i;
+			entries[idx].reg = PMBUS_STATUS_VOUT;
+			scnprintf(name, PMBUS_NAME_SIZE, "status%d_vout", i);
+			debugfs_create_file(name, 0444, data->debugfs,
+					    &entries[idx++],
+					    &pmbus_debugfs_ops);
+		}
+
+		if (data->info->func[i] & PMBUS_HAVE_STATUS_IOUT) {
+			entries[idx].client = client;
+			entries[idx].page = i;
+			entries[idx].reg = PMBUS_STATUS_IOUT;
+			scnprintf(name, PMBUS_NAME_SIZE, "status%d_iout", i);
+			debugfs_create_file(name, 0444, data->debugfs,
+					    &entries[idx++],
+					    &pmbus_debugfs_ops);
+		}
+
+		if (data->info->func[i] & PMBUS_HAVE_STATUS_INPUT) {
+			entries[idx].client = client;
+			entries[idx].page = i;
+			entries[idx].reg = PMBUS_STATUS_INPUT;
+			scnprintf(name, PMBUS_NAME_SIZE, "status%d_input", i);
+			debugfs_create_file(name, 0444, data->debugfs,
+					    &entries[idx++],
+					    &pmbus_debugfs_ops);
+		}
+
+		if (data->info->func[i] & PMBUS_HAVE_STATUS_TEMP) {
+			entries[idx].client = client;
+			entries[idx].page = i;
+			entries[idx].reg = PMBUS_STATUS_TEMPERATURE;
+			scnprintf(name, PMBUS_NAME_SIZE, "status%d_temp", i);
+			debugfs_create_file(name, 0444, data->debugfs,
+					    &entries[idx++],
+					    &pmbus_debugfs_ops);
+		}
+
+		if (pmbus_check_byte_register(client, i, PMBUS_STATUS_CML)) {
+			entries[idx].client = client;
+			entries[idx].page = i;
+			entries[idx].reg = PMBUS_STATUS_CML;
+			scnprintf(name, PMBUS_NAME_SIZE, "status%d_cml", i);
+			debugfs_create_file(name, 0444, data->debugfs,
+					    &entries[idx++],
+					    &pmbus_debugfs_ops);
+		}
+
+		if (pmbus_check_byte_register(client, i, PMBUS_STATUS_OTHER)) {
+			entries[idx].client = client;
+			entries[idx].page = i;
+			entries[idx].reg = PMBUS_STATUS_OTHER;
+			scnprintf(name, PMBUS_NAME_SIZE, "status%d_other", i);
+			debugfs_create_file(name, 0444, data->debugfs,
+					    &entries[idx++],
+					    &pmbus_debugfs_ops);
+		}
+
+		if (pmbus_check_byte_register(client, i,
+					      PMBUS_STATUS_MFR_SPECIFIC)) {
+			entries[idx].client = client;
+			entries[idx].page = i;
+			entries[idx].reg = PMBUS_STATUS_MFR_SPECIFIC;
+			scnprintf(name, PMBUS_NAME_SIZE, "status%d_mfr", i);
+			debugfs_create_file(name, 0444, data->debugfs,
+					    &entries[idx++],
+					    &pmbus_debugfs_ops);
+		}
+
+		if (data->info->func[i] & PMBUS_HAVE_STATUS_FAN12) {
+			entries[idx].client = client;
+			entries[idx].page = i;
+			entries[idx].reg = PMBUS_STATUS_FAN_12;
+			scnprintf(name, PMBUS_NAME_SIZE, "status%d_fan12", i);
+			debugfs_create_file(name, 0444, data->debugfs,
+					    &entries[idx++],
+					    &pmbus_debugfs_ops);
+		}
+
+		if (data->info->func[i] & PMBUS_HAVE_STATUS_FAN34) {
+			entries[idx].client = client;
+			entries[idx].page = i;
+			entries[idx].reg = PMBUS_STATUS_FAN_34;
+			scnprintf(name, PMBUS_NAME_SIZE, "status%d_fan34", i);
+			debugfs_create_file(name, 0444, data->debugfs,
+					    &entries[idx++],
+					    &pmbus_debugfs_ops);
+		}
+	}
+
+	return devm_add_action_or_reset(data->dev,
+					pmbus_remove_debugfs, data->debugfs);
+}
+#else
+static int pmbus_init_debugfs(struct i2c_client *client,
+			      struct pmbus_data *data)
+{
+	return 0;
+}
+#endif	/* IS_ENABLED(CONFIG_DEBUG_FS) */
+
+int pmbus_do_probe(struct i2c_client *client, struct pmbus_driver_info *info)
+{
+	struct device *dev = &client->dev;
+	const struct pmbus_platform_data *pdata = dev_get_platdata(dev);
+	struct pmbus_data *data;
+	size_t groups_num = 0;
+	int ret;
+	int i;
+	char *name;
+
+	if (!info)
+		return -ENODEV;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WRITE_BYTE
+				     | I2C_FUNC_SMBUS_BYTE_DATA
+				     | I2C_FUNC_SMBUS_WORD_DATA))
+		return -ENODEV;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	if (info->groups)
+		while (info->groups[groups_num])
+			groups_num++;
+
+	data->groups = devm_kcalloc(dev, groups_num + 2, sizeof(void *),
+				    GFP_KERNEL);
+	if (!data->groups)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, data);
+	mutex_init(&data->update_lock);
+	data->dev = dev;
+
+	if (pdata)
+		data->flags = pdata->flags;
+	data->info = info;
+	data->currpage = -1;
+	data->currphase = -1;
+
+	for (i = 0; i < ARRAY_SIZE(data->vout_low); i++) {
+		data->vout_low[i] = -1;
+		data->vout_high[i] = -1;
+	}
+
+	ret = pmbus_init_common(client, data, info);
+	if (ret < 0)
+		return ret;
+
+	ret = pmbus_find_attributes(client, data);
+	if (ret)
+		return ret;
+
+	/*
+	 * If there are no attributes, something is wrong.
+	 * Bail out instead of trying to register nothing.
+	 */
+	if (!data->num_attributes) {
+		dev_err(dev, "No attributes found\n");
+		return -ENODEV;
+	}
+
+	name = devm_kstrdup(dev, client->name, GFP_KERNEL);
+	if (!name)
+		return -ENOMEM;
+	strreplace(name, '-', '_');
+
+	data->groups[0] = &data->group;
+	memcpy(data->groups + 1, info->groups, sizeof(void *) * groups_num);
+	data->hwmon_dev = devm_hwmon_device_register_with_groups(dev,
+					name, data, data->groups);
+	if (IS_ERR(data->hwmon_dev)) {
+		dev_err(dev, "Failed to register hwmon device\n");
+		return PTR_ERR(data->hwmon_dev);
+	}
+
+	ret = pmbus_regulator_register(data);
+	if (ret)
+		return ret;
+
+	ret = pmbus_init_debugfs(client, data);
+	if (ret)
+		dev_warn(dev, "Failed to register debugfs\n");
+
+	return 0;
+}
+EXPORT_SYMBOL_NS_GPL(pmbus_do_probe, PMBUS);
+
+struct dentry *pmbus_get_debugfs_dir(struct i2c_client *client)
+{
+	struct pmbus_data *data = i2c_get_clientdata(client);
+
+	return data->debugfs;
+}
+EXPORT_SYMBOL_NS_GPL(pmbus_get_debugfs_dir, PMBUS);
+
+static int __init pmbus_core_init(void)
+{
+	pmbus_debugfs_dir = debugfs_create_dir("pmbus", NULL);
+	if (IS_ERR(pmbus_debugfs_dir))
+		pmbus_debugfs_dir = NULL;
+
+	return 0;
+}
+
+static void __exit pmbus_core_exit(void)
+{
+	debugfs_remove_recursive(pmbus_debugfs_dir);
+}
+
+module_init(pmbus_core_init);
+module_exit(pmbus_core_exit);
+
+MODULE_AUTHOR("Guenter Roeck");
+MODULE_DESCRIPTION("PMBus core driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/hwmon/pmbus/pxe1610.c b/drivers/hwmon/pmbus/pxe1610.c
new file mode 100644
index 000000000..52bee5de2
--- /dev/null
+++ b/drivers/hwmon/pmbus/pxe1610.c
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Hardware monitoring driver for Infineon PXE1610
+ *
+ * Copyright (c) 2019 Facebook Inc
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include "pmbus.h"
+
+#define PXE1610_NUM_PAGES 3
+
+/* Identify chip parameters. */
+static int pxe1610_identify(struct i2c_client *client,
+			     struct pmbus_driver_info *info)
+{
+	int i;
+
+	for (i = 0; i < PXE1610_NUM_PAGES; i++) {
+		if (pmbus_check_byte_register(client, i, PMBUS_VOUT_MODE)) {
+			u8 vout_mode;
+			int ret;
+
+			/* Read the register with VOUT scaling value.*/
+			ret = pmbus_read_byte_data(client, i, PMBUS_VOUT_MODE);
+			if (ret < 0)
+				return ret;
+
+			vout_mode = ret & GENMASK(4, 0);
+
+			switch (vout_mode) {
+			case 1:
+				info->vrm_version[i] = vr12;
+				break;
+			case 2:
+				info->vrm_version[i] = vr13;
+				break;
+			default:
+				/*
+				 * If prior pages are available limit operation
+				 * to them
+				 */
+				if (i != 0) {
+					info->pages = i;
+					return 0;
+				}
+
+				return -ENODEV;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static struct pmbus_driver_info pxe1610_info = {
+	.pages = PXE1610_NUM_PAGES,
+	.format[PSC_VOLTAGE_IN] = linear,
+	.format[PSC_VOLTAGE_OUT] = vid,
+	.format[PSC_CURRENT_IN] = linear,
+	.format[PSC_CURRENT_OUT] = linear,
+	.format[PSC_TEMPERATURE] = linear,
+	.format[PSC_POWER] = linear,
+	.func[0] = PMBUS_HAVE_VIN
+		| PMBUS_HAVE_VOUT | PMBUS_HAVE_IIN
+		| PMBUS_HAVE_IOUT | PMBUS_HAVE_PIN
+		| PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
+		| PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT
+		| PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP,
+	.func[1] = PMBUS_HAVE_VIN
+		| PMBUS_HAVE_VOUT | PMBUS_HAVE_IIN
+		| PMBUS_HAVE_IOUT | PMBUS_HAVE_PIN
+		| PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
+		| PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT
+		| PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP,
+	.func[2] = PMBUS_HAVE_VIN
+		| PMBUS_HAVE_VOUT | PMBUS_HAVE_IIN
+		| PMBUS_HAVE_IOUT | PMBUS_HAVE_PIN
+		| PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP
+		| PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT
+		| PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP,
+	.identify = pxe1610_identify,
+};
+
+static int pxe1610_probe(struct i2c_client *client)
+{
+	struct pmbus_driver_info *info;
+	u8 buf[I2C_SMBUS_BLOCK_MAX];
+	int ret;
+
+	if (!i2c_check_functionality(
+			client->adapter,
+			I2C_FUNC_SMBUS_READ_BYTE_DATA
+			| I2C_FUNC_SMBUS_READ_WORD_DATA
+			| I2C_FUNC_SMBUS_READ_BLOCK_DATA))
+		return -ENODEV;
+
+	/*
+	 * By default this device doesn't boot to page 0, so set page 0
+	 * to access all pmbus registers.
+	 */
+	i2c_smbus_write_byte_data(client, PMBUS_PAGE, 0);
+
+	/* Read Manufacturer id */
+	ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, buf);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to read PMBUS_MFR_ID\n");
+		return ret;
+	}
+	if (ret != 2 || strncmp(buf, "XP", 2)) {
+		dev_err(&client->dev, "MFR_ID unrecognized\n");
+		return -ENODEV;
+	}
+
+	info = devm_kmemdup(&client->dev, &pxe1610_info,
+			    sizeof(struct pmbus_driver_info),
+			    GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	return pmbus_do_probe(client, info);
+}
+
+static const struct i2c_device_id pxe1610_id[] = {
+	{"pxe1610", 0},
+	{"pxe1110", 0},
+	{"pxm1310", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, pxe1610_id);
+
+static struct i2c_driver pxe1610_driver = {
+	.driver = {
+			.name = "pxe1610",
+			},
+	.probe_new = pxe1610_probe,
+	.id_table = pxe1610_id,
+};
+
+module_i2c_driver(pxe1610_driver);
+
+MODULE_AUTHOR("Vijay Khemka <vijaykhemka@fb.com>");
+MODULE_DESCRIPTION("PMBus driver for Infineon PXE1610, PXE1110 and PXM1310");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/q54sj108a2.c b/drivers/hwmon/pmbus/q54sj108a2.c
new file mode 100644
index 000000000..fa298b426
--- /dev/null
+++ b/drivers/hwmon/pmbus/q54sj108a2.c
@@ -0,0 +1,423 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Driver for Delta modules, Q54SJ108A2 series 1/4 Brick DC/DC
+ * Regulated Power Module
+ *
+ * Copyright 2020 Delta LLC.
+ */
+
+#include <linux/debugfs.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include "pmbus.h"
+
+#define STORE_DEFAULT_ALL		0x11
+#define ERASE_BLACKBOX_DATA		0xD1
+#define READ_HISTORY_EVENT_NUMBER	0xD2
+#define READ_HISTORY_EVENTS		0xE0
+#define SET_HISTORY_EVENT_OFFSET	0xE1
+#define PMBUS_FLASH_KEY_WRITE		0xEC
+
+enum chips {
+	q54sj108a2
+};
+
+enum {
+	Q54SJ108A2_DEBUGFS_OPERATION = 0,
+	Q54SJ108A2_DEBUGFS_CLEARFAULT,
+	Q54SJ108A2_DEBUGFS_WRITEPROTECT,
+	Q54SJ108A2_DEBUGFS_STOREDEFAULT,
+	Q54SJ108A2_DEBUGFS_VOOV_RESPONSE,
+	Q54SJ108A2_DEBUGFS_IOOC_RESPONSE,
+	Q54SJ108A2_DEBUGFS_PMBUS_VERSION,
+	Q54SJ108A2_DEBUGFS_MFR_ID,
+	Q54SJ108A2_DEBUGFS_MFR_MODEL,
+	Q54SJ108A2_DEBUGFS_MFR_REVISION,
+	Q54SJ108A2_DEBUGFS_MFR_LOCATION,
+	Q54SJ108A2_DEBUGFS_BLACKBOX_ERASE,
+	Q54SJ108A2_DEBUGFS_BLACKBOX_READ_OFFSET,
+	Q54SJ108A2_DEBUGFS_BLACKBOX_SET_OFFSET,
+	Q54SJ108A2_DEBUGFS_BLACKBOX_READ,
+	Q54SJ108A2_DEBUGFS_FLASH_KEY,
+	Q54SJ108A2_DEBUGFS_NUM_ENTRIES
+};
+
+struct q54sj108a2_data {
+	enum chips chip;
+	struct i2c_client *client;
+
+	int debugfs_entries[Q54SJ108A2_DEBUGFS_NUM_ENTRIES];
+};
+
+#define to_psu(x, y) container_of((x), struct q54sj108a2_data, debugfs_entries[(y)])
+
+static struct pmbus_driver_info q54sj108a2_info[] = {
+	[q54sj108a2] = {
+		.pages = 1,
+
+		/* Source : Delta Q54SJ108A2 */
+		.format[PSC_TEMPERATURE] = linear,
+		.format[PSC_VOLTAGE_IN] = linear,
+		.format[PSC_CURRENT_OUT] = linear,
+
+		.func[0] = PMBUS_HAVE_VIN |
+		PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+		PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+		PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP |
+		PMBUS_HAVE_STATUS_INPUT,
+	},
+};
+
+static ssize_t q54sj108a2_debugfs_read(struct file *file, char __user *buf,
+				       size_t count, loff_t *ppos)
+{
+	int rc;
+	int *idxp = file->private_data;
+	int idx = *idxp;
+	struct q54sj108a2_data *psu = to_psu(idxp, idx);
+	char data[I2C_SMBUS_BLOCK_MAX + 2] = { 0 };
+	char data_char[I2C_SMBUS_BLOCK_MAX + 2] = { 0 };
+	char *res;
+
+	switch (idx) {
+	case Q54SJ108A2_DEBUGFS_OPERATION:
+		rc = i2c_smbus_read_byte_data(psu->client, PMBUS_OPERATION);
+		if (rc < 0)
+			return rc;
+
+		rc = snprintf(data, 3, "%02x", rc);
+		break;
+	case Q54SJ108A2_DEBUGFS_WRITEPROTECT:
+		rc = i2c_smbus_read_byte_data(psu->client, PMBUS_WRITE_PROTECT);
+		if (rc < 0)
+			return rc;
+
+		rc = snprintf(data, 3, "%02x", rc);
+		break;
+	case Q54SJ108A2_DEBUGFS_VOOV_RESPONSE:
+		rc = i2c_smbus_read_byte_data(psu->client, PMBUS_VOUT_OV_FAULT_RESPONSE);
+		if (rc < 0)
+			return rc;
+
+		rc = snprintf(data, 3, "%02x", rc);
+		break;
+	case Q54SJ108A2_DEBUGFS_IOOC_RESPONSE:
+		rc = i2c_smbus_read_byte_data(psu->client, PMBUS_IOUT_OC_FAULT_RESPONSE);
+		if (rc < 0)
+			return rc;
+
+		rc = snprintf(data, 3, "%02x", rc);
+		break;
+	case Q54SJ108A2_DEBUGFS_PMBUS_VERSION:
+		rc = i2c_smbus_read_byte_data(psu->client, PMBUS_REVISION);
+		if (rc < 0)
+			return rc;
+
+		rc = snprintf(data, 3, "%02x", rc);
+		break;
+	case Q54SJ108A2_DEBUGFS_MFR_ID:
+		rc = i2c_smbus_read_block_data(psu->client, PMBUS_MFR_ID, data);
+		if (rc < 0)
+			return rc;
+		break;
+	case Q54SJ108A2_DEBUGFS_MFR_MODEL:
+		rc = i2c_smbus_read_block_data(psu->client, PMBUS_MFR_MODEL, data);
+		if (rc < 0)
+			return rc;
+		break;
+	case Q54SJ108A2_DEBUGFS_MFR_REVISION:
+		rc = i2c_smbus_read_block_data(psu->client, PMBUS_MFR_REVISION, data);
+		if (rc < 0)
+			return rc;
+		break;
+	case Q54SJ108A2_DEBUGFS_MFR_LOCATION:
+		rc = i2c_smbus_read_block_data(psu->client, PMBUS_MFR_LOCATION, data);
+		if (rc < 0)
+			return rc;
+		break;
+	case Q54SJ108A2_DEBUGFS_BLACKBOX_READ_OFFSET:
+		rc = i2c_smbus_read_byte_data(psu->client, READ_HISTORY_EVENT_NUMBER);
+		if (rc < 0)
+			return rc;
+
+		rc = snprintf(data, 3, "%02x", rc);
+		break;
+	case Q54SJ108A2_DEBUGFS_BLACKBOX_READ:
+		rc = i2c_smbus_read_block_data(psu->client, READ_HISTORY_EVENTS, data);
+		if (rc < 0)
+			return rc;
+
+		res = bin2hex(data, data_char, 32);
+		rc = res - data;
+
+		break;
+	case Q54SJ108A2_DEBUGFS_FLASH_KEY:
+		rc = i2c_smbus_read_block_data(psu->client, PMBUS_FLASH_KEY_WRITE, data);
+		if (rc < 0)
+			return rc;
+
+		res = bin2hex(data, data_char, 4);
+		rc = res - data;
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	data[rc] = '\n';
+	rc += 2;
+
+	return simple_read_from_buffer(buf, count, ppos, data, rc);
+}
+
+static ssize_t q54sj108a2_debugfs_write(struct file *file, const char __user *buf,
+					size_t count, loff_t *ppos)
+{
+	u8 flash_key[4];
+	u8 dst_data;
+	ssize_t rc;
+	int *idxp = file->private_data;
+	int idx = *idxp;
+	struct q54sj108a2_data *psu = to_psu(idxp, idx);
+
+	rc = i2c_smbus_write_byte_data(psu->client, PMBUS_WRITE_PROTECT, 0);
+	if (rc)
+		return rc;
+
+	switch (idx) {
+	case Q54SJ108A2_DEBUGFS_OPERATION:
+		rc = kstrtou8_from_user(buf, count, 0, &dst_data);
+		if (rc < 0)
+			return rc;
+
+		rc = i2c_smbus_write_byte_data(psu->client, PMBUS_OPERATION, dst_data);
+		if (rc < 0)
+			return rc;
+
+		break;
+	case Q54SJ108A2_DEBUGFS_CLEARFAULT:
+		rc = i2c_smbus_write_byte(psu->client, PMBUS_CLEAR_FAULTS);
+		if (rc < 0)
+			return rc;
+
+		break;
+	case Q54SJ108A2_DEBUGFS_STOREDEFAULT:
+		flash_key[0] = 0x7E;
+		flash_key[1] = 0x15;
+		flash_key[2] = 0xDC;
+		flash_key[3] = 0x42;
+		rc = i2c_smbus_write_block_data(psu->client, PMBUS_FLASH_KEY_WRITE, 4, flash_key);
+		if (rc < 0)
+			return rc;
+
+		rc = i2c_smbus_write_byte(psu->client, STORE_DEFAULT_ALL);
+		if (rc < 0)
+			return rc;
+
+		break;
+	case Q54SJ108A2_DEBUGFS_VOOV_RESPONSE:
+		rc = kstrtou8_from_user(buf, count, 0, &dst_data);
+		if (rc < 0)
+			return rc;
+
+		rc = i2c_smbus_write_byte_data(psu->client, PMBUS_VOUT_OV_FAULT_RESPONSE, dst_data);
+		if (rc < 0)
+			return rc;
+
+		break;
+	case Q54SJ108A2_DEBUGFS_IOOC_RESPONSE:
+		rc = kstrtou8_from_user(buf, count, 0, &dst_data);
+		if (rc < 0)
+			return rc;
+
+		rc = i2c_smbus_write_byte_data(psu->client, PMBUS_IOUT_OC_FAULT_RESPONSE, dst_data);
+		if (rc < 0)
+			return rc;
+
+		break;
+	case Q54SJ108A2_DEBUGFS_BLACKBOX_ERASE:
+		rc = i2c_smbus_write_byte(psu->client, ERASE_BLACKBOX_DATA);
+		if (rc < 0)
+			return rc;
+
+		break;
+	case Q54SJ108A2_DEBUGFS_BLACKBOX_SET_OFFSET:
+		rc = kstrtou8_from_user(buf, count, 0, &dst_data);
+		if (rc < 0)
+			return rc;
+
+		rc = i2c_smbus_write_byte_data(psu->client, SET_HISTORY_EVENT_OFFSET, dst_data);
+		if (rc < 0)
+			return rc;
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return count;
+}
+
+static const struct file_operations q54sj108a2_fops = {
+	.llseek = noop_llseek,
+	.read = q54sj108a2_debugfs_read,
+	.write = q54sj108a2_debugfs_write,
+	.open = simple_open,
+};
+
+static const struct i2c_device_id q54sj108a2_id[] = {
+	{ "q54sj108a2", q54sj108a2 },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(i2c, q54sj108a2_id);
+
+static int q54sj108a2_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	u8 buf[I2C_SMBUS_BLOCK_MAX + 1];
+	enum chips chip_id;
+	int ret, i;
+	struct dentry *debugfs;
+	struct dentry *q54sj108a2_dir;
+	struct q54sj108a2_data *psu;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_BYTE_DATA |
+				     I2C_FUNC_SMBUS_WORD_DATA |
+				     I2C_FUNC_SMBUS_BLOCK_DATA))
+		return -ENODEV;
+
+	if (client->dev.of_node)
+		chip_id = (enum chips)(unsigned long)of_device_get_match_data(dev);
+	else
+		chip_id = i2c_match_id(q54sj108a2_id, client)->driver_data;
+
+	ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, buf);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to read Manufacturer ID\n");
+		return ret;
+	}
+	if (ret != 6 || strncmp(buf, "DELTA", 5)) {
+		buf[ret] = '\0';
+		dev_err(dev, "Unsupported Manufacturer ID '%s'\n", buf);
+		return -ENODEV;
+	}
+
+	/*
+	 * The chips support reading PMBUS_MFR_MODEL.
+	 */
+	ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, buf);
+	if (ret < 0) {
+		dev_err(dev, "Failed to read Manufacturer Model\n");
+		return ret;
+	}
+	if (ret != 14 || strncmp(buf, "Q54SJ108A2", 10)) {
+		buf[ret] = '\0';
+		dev_err(dev, "Unsupported Manufacturer Model '%s'\n", buf);
+		return -ENODEV;
+	}
+
+	ret = i2c_smbus_read_block_data(client, PMBUS_MFR_REVISION, buf);
+	if (ret < 0) {
+		dev_err(dev, "Failed to read Manufacturer Revision\n");
+		return ret;
+	}
+	if (ret != 4 || buf[0] != 'S') {
+		buf[ret] = '\0';
+		dev_err(dev, "Unsupported Manufacturer Revision '%s'\n", buf);
+		return -ENODEV;
+	}
+
+	ret = pmbus_do_probe(client, &q54sj108a2_info[chip_id]);
+	if (ret)
+		return ret;
+
+	psu = devm_kzalloc(&client->dev, sizeof(*psu), GFP_KERNEL);
+	if (!psu)
+		return 0;
+
+	psu->client = client;
+
+	debugfs = pmbus_get_debugfs_dir(client);
+
+	q54sj108a2_dir = debugfs_create_dir(client->name, debugfs);
+
+	for (i = 0; i < Q54SJ108A2_DEBUGFS_NUM_ENTRIES; ++i)
+		psu->debugfs_entries[i] = i;
+
+	debugfs_create_file("operation", 0644, q54sj108a2_dir,
+			    &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_OPERATION],
+			    &q54sj108a2_fops);
+	debugfs_create_file("clear_fault", 0200, q54sj108a2_dir,
+			    &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_CLEARFAULT],
+			    &q54sj108a2_fops);
+	debugfs_create_file("write_protect", 0444, q54sj108a2_dir,
+			    &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_WRITEPROTECT],
+			    &q54sj108a2_fops);
+	debugfs_create_file("store_default", 0200, q54sj108a2_dir,
+			    &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_STOREDEFAULT],
+			    &q54sj108a2_fops);
+	debugfs_create_file("vo_ov_response", 0644, q54sj108a2_dir,
+			    &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_VOOV_RESPONSE],
+			    &q54sj108a2_fops);
+	debugfs_create_file("io_oc_response", 0644, q54sj108a2_dir,
+			    &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_IOOC_RESPONSE],
+			    &q54sj108a2_fops);
+	debugfs_create_file("pmbus_revision", 0444, q54sj108a2_dir,
+			    &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_PMBUS_VERSION],
+			    &q54sj108a2_fops);
+	debugfs_create_file("mfr_id", 0444, q54sj108a2_dir,
+			    &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_MFR_ID],
+			    &q54sj108a2_fops);
+	debugfs_create_file("mfr_model", 0444, q54sj108a2_dir,
+			    &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_MFR_MODEL],
+			    &q54sj108a2_fops);
+	debugfs_create_file("mfr_revision", 0444, q54sj108a2_dir,
+			    &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_MFR_REVISION],
+			    &q54sj108a2_fops);
+	debugfs_create_file("mfr_location", 0444, q54sj108a2_dir,
+			    &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_MFR_LOCATION],
+			    &q54sj108a2_fops);
+	debugfs_create_file("blackbox_erase", 0200, q54sj108a2_dir,
+			    &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_BLACKBOX_ERASE],
+			    &q54sj108a2_fops);
+	debugfs_create_file("blackbox_read_offset", 0444, q54sj108a2_dir,
+			    &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_BLACKBOX_READ_OFFSET],
+			    &q54sj108a2_fops);
+	debugfs_create_file("blackbox_set_offset", 0200, q54sj108a2_dir,
+			    &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_BLACKBOX_SET_OFFSET],
+			    &q54sj108a2_fops);
+	debugfs_create_file("blackbox_read", 0444, q54sj108a2_dir,
+			    &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_BLACKBOX_READ],
+			    &q54sj108a2_fops);
+	debugfs_create_file("flash_key", 0444, q54sj108a2_dir,
+			    &psu->debugfs_entries[Q54SJ108A2_DEBUGFS_FLASH_KEY],
+			    &q54sj108a2_fops);
+
+	return 0;
+}
+
+static const struct of_device_id q54sj108a2_of_match[] = {
+	{ .compatible = "delta,q54sj108a2", .data = (void *)q54sj108a2 },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(of, q54sj108a2_of_match);
+
+static struct i2c_driver q54sj108a2_driver = {
+	.driver = {
+		.name = "q54sj108a2",
+		.of_match_table = q54sj108a2_of_match,
+	},
+	.probe_new = q54sj108a2_probe,
+	.id_table = q54sj108a2_id,
+};
+
+module_i2c_driver(q54sj108a2_driver);
+
+MODULE_AUTHOR("Xiao.Ma <xiao.mx.ma@deltaww.com>");
+MODULE_DESCRIPTION("PMBus driver for Delta Q54SJ108A2 series modules");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/stpddc60.c b/drivers/hwmon/pmbus/stpddc60.c
new file mode 100644
index 000000000..357b9d9d8
--- /dev/null
+++ b/drivers/hwmon/pmbus/stpddc60.c
@@ -0,0 +1,249 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Hardware monitoring driver for the STPDDC60 controller
+ *
+ * Copyright (c) 2021 Flextronics International Sweden AB.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/pmbus.h>
+#include "pmbus.h"
+
+#define STPDDC60_MFR_READ_VOUT		0xd2
+#define STPDDC60_MFR_OV_LIMIT_OFFSET	0xe5
+#define STPDDC60_MFR_UV_LIMIT_OFFSET	0xe6
+
+static const struct i2c_device_id stpddc60_id[] = {
+	{"stpddc60", 0},
+	{"bmr481", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, stpddc60_id);
+
+static struct pmbus_driver_info stpddc60_info = {
+	.pages = 1,
+	.func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+		| PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
+		| PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP
+		| PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
+		| PMBUS_HAVE_POUT,
+};
+
+/*
+ * Calculate the closest absolute offset between commanded vout value
+ * and limit value in steps of 50mv in the range 0 (50mv) to 7 (400mv).
+ * Return 0 if the upper limit is lower than vout or if the lower limit
+ * is higher than vout.
+ */
+static u8 stpddc60_get_offset(int vout, u16 limit, bool over)
+{
+	int offset;
+	long v, l;
+
+	v = 250 + (vout - 1) * 5; /* Convert VID to mv */
+	l = (limit * 1000L) >> 8; /* Convert LINEAR to mv */
+
+	if (over == (l < v))
+		return 0;
+
+	offset = DIV_ROUND_CLOSEST(abs(l - v), 50);
+
+	if (offset > 0)
+		offset--;
+
+	return clamp_val(offset, 0, 7);
+}
+
+/*
+ * Adjust the linear format word to use the given fixed exponent.
+ */
+static u16 stpddc60_adjust_linear(u16 word, s16 fixed)
+{
+	s16 e, m, d;
+
+	e = ((s16)word) >> 11;
+	m = ((s16)((word & 0x7ff) << 5)) >> 5;
+	d = e - fixed;
+
+	if (d >= 0)
+		m <<= d;
+	else
+		m >>= -d;
+
+	return clamp_val(m, 0, 0x3ff) | ((fixed << 11) & 0xf800);
+}
+
+/*
+ * The VOUT_COMMAND register uses the VID format but the vout alarm limit
+ * registers use the LINEAR format so we override VOUT_MODE here to force
+ * LINEAR format for all registers.
+ */
+static int stpddc60_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+	int ret;
+
+	if (page > 0)
+		return -ENXIO;
+
+	switch (reg) {
+	case PMBUS_VOUT_MODE:
+		ret = 0x18;
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+
+	return ret;
+}
+
+/*
+ * The vout related registers return values in LINEAR11 format when LINEAR16
+ * is expected. Clear the top 5 bits to set the exponent part to zero to
+ * convert the value to LINEAR16 format.
+ */
+static int stpddc60_read_word_data(struct i2c_client *client, int page,
+				   int phase, int reg)
+{
+	int ret;
+
+	if (page > 0)
+		return -ENXIO;
+
+	switch (reg) {
+	case PMBUS_READ_VOUT:
+		ret = pmbus_read_word_data(client, page, phase,
+					   STPDDC60_MFR_READ_VOUT);
+		if (ret < 0)
+			return ret;
+		ret &= 0x7ff;
+		break;
+	case PMBUS_VOUT_OV_FAULT_LIMIT:
+	case PMBUS_VOUT_UV_FAULT_LIMIT:
+		ret = pmbus_read_word_data(client, page, phase, reg);
+		if (ret < 0)
+			return ret;
+		ret &= 0x7ff;
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+
+	return ret;
+}
+
+/*
+ * The vout under- and over-voltage limits are set as an offset relative to
+ * the commanded vout voltage. The vin, iout, pout and temp limits must use
+ * the same fixed exponent the chip uses to encode the data when read.
+ */
+static int stpddc60_write_word_data(struct i2c_client *client, int page,
+				    int reg, u16 word)
+{
+	int ret;
+	u8 offset;
+
+	if (page > 0)
+		return -ENXIO;
+
+	switch (reg) {
+	case PMBUS_VOUT_OV_FAULT_LIMIT:
+		ret = pmbus_read_word_data(client, page, 0xff,
+					   PMBUS_VOUT_COMMAND);
+		if (ret < 0)
+			return ret;
+		offset = stpddc60_get_offset(ret, word, true);
+		ret = pmbus_write_byte_data(client, page,
+					    STPDDC60_MFR_OV_LIMIT_OFFSET,
+					    offset);
+		break;
+	case PMBUS_VOUT_UV_FAULT_LIMIT:
+		ret = pmbus_read_word_data(client, page, 0xff,
+					   PMBUS_VOUT_COMMAND);
+		if (ret < 0)
+			return ret;
+		offset = stpddc60_get_offset(ret, word, false);
+		ret = pmbus_write_byte_data(client, page,
+					    STPDDC60_MFR_UV_LIMIT_OFFSET,
+					    offset);
+		break;
+	case PMBUS_VIN_OV_FAULT_LIMIT:
+	case PMBUS_VIN_UV_FAULT_LIMIT:
+	case PMBUS_OT_FAULT_LIMIT:
+	case PMBUS_OT_WARN_LIMIT:
+	case PMBUS_IOUT_OC_FAULT_LIMIT:
+	case PMBUS_IOUT_OC_WARN_LIMIT:
+	case PMBUS_POUT_OP_FAULT_LIMIT:
+		ret = pmbus_read_word_data(client, page, 0xff, reg);
+		if (ret < 0)
+			return ret;
+		word = stpddc60_adjust_linear(word, ret >> 11);
+		ret = pmbus_write_word_data(client, page, reg, word);
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+
+	return ret;
+}
+
+static int stpddc60_probe(struct i2c_client *client)
+{
+	int status;
+	u8 device_id[I2C_SMBUS_BLOCK_MAX + 1];
+	const struct i2c_device_id *mid;
+	struct pmbus_driver_info *info = &stpddc60_info;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_READ_BYTE_DATA
+				     | I2C_FUNC_SMBUS_BLOCK_DATA))
+		return -ENODEV;
+
+	status = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, device_id);
+	if (status < 0) {
+		dev_err(&client->dev, "Failed to read Manufacturer Model\n");
+		return status;
+	}
+	for (mid = stpddc60_id; mid->name[0]; mid++) {
+		if (!strncasecmp(mid->name, device_id, strlen(mid->name)))
+			break;
+	}
+	if (!mid->name[0]) {
+		dev_err(&client->dev, "Unsupported device\n");
+		return -ENODEV;
+	}
+
+	info->read_byte_data = stpddc60_read_byte_data;
+	info->read_word_data = stpddc60_read_word_data;
+	info->write_word_data = stpddc60_write_word_data;
+
+	status = pmbus_do_probe(client, info);
+	if (status < 0)
+		return status;
+
+	pmbus_set_update(client, PMBUS_VOUT_OV_FAULT_LIMIT, true);
+	pmbus_set_update(client, PMBUS_VOUT_UV_FAULT_LIMIT, true);
+
+	return 0;
+}
+
+static struct i2c_driver stpddc60_driver = {
+	.driver = {
+		   .name = "stpddc60",
+		   },
+	.probe_new = stpddc60_probe,
+	.id_table = stpddc60_id,
+};
+
+module_i2c_driver(stpddc60_driver);
+
+MODULE_AUTHOR("Erik Rosen <erik.rosen@metormote.com>");
+MODULE_DESCRIPTION("PMBus driver for ST STPDDC60");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/tps40422.c b/drivers/hwmon/pmbus/tps40422.c
new file mode 100644
index 000000000..31bb83c0e
--- /dev/null
+++ b/drivers/hwmon/pmbus/tps40422.c
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Hardware monitoring driver for TI TPS40422
+ *
+ * Copyright (c) 2014 Nokia Solutions and Networks.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include "pmbus.h"
+
+static struct pmbus_driver_info tps40422_info = {
+	.pages = 2,
+	.format[PSC_VOLTAGE_IN] = linear,
+	.format[PSC_VOLTAGE_OUT] = linear,
+	.format[PSC_TEMPERATURE] = linear,
+	.func[0] = PMBUS_HAVE_VOUT | PMBUS_HAVE_TEMP2
+		| PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_TEMP
+		| PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+	.func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_TEMP2
+		| PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_TEMP
+		| PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT,
+};
+
+static int tps40422_probe(struct i2c_client *client)
+{
+	return pmbus_do_probe(client, &tps40422_info);
+}
+
+static const struct i2c_device_id tps40422_id[] = {
+	{"tps40422", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, tps40422_id);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver tps40422_driver = {
+	.driver = {
+		   .name = "tps40422",
+		   },
+	.probe_new = tps40422_probe,
+	.id_table = tps40422_id,
+};
+
+module_i2c_driver(tps40422_driver);
+
+MODULE_AUTHOR("Zhu Laiwen <richard.zhu@nsn.com>");
+MODULE_DESCRIPTION("PMBus driver for TI TPS40422");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/tps53679.c b/drivers/hwmon/pmbus/tps53679.c
new file mode 100644
index 000000000..81b9d8136
--- /dev/null
+++ b/drivers/hwmon/pmbus/tps53679.c
@@ -0,0 +1,311 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Hardware monitoring driver for Texas Instruments TPS53679
+ *
+ * Copyright (c) 2017 Mellanox Technologies. All rights reserved.
+ * Copyright (c) 2017 Vadim Pasternak <vadimp@mellanox.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include "pmbus.h"
+
+enum chips {
+	tps53647, tps53667, tps53676, tps53679, tps53681, tps53688
+};
+
+#define TPS53647_PAGE_NUM		1
+
+#define TPS53676_USER_DATA_03		0xb3
+#define TPS53676_MAX_PHASES		7
+
+#define TPS53679_PROT_VR12_5MV		0x01 /* VR12.0 mode, 5-mV DAC */
+#define TPS53679_PROT_VR12_5_10MV	0x02 /* VR12.5 mode, 10-mV DAC */
+#define TPS53679_PROT_VR13_10MV		0x04 /* VR13.0 mode, 10-mV DAC */
+#define TPS53679_PROT_IMVP8_5MV		0x05 /* IMVP8 mode, 5-mV DAC */
+#define TPS53679_PROT_VR13_5MV		0x07 /* VR13.0 mode, 5-mV DAC */
+#define TPS53679_PAGE_NUM		2
+
+#define TPS53681_DEVICE_ID		0x81
+
+#define TPS53681_PMBUS_REVISION		0x33
+
+#define TPS53681_MFR_SPECIFIC_20	0xe4	/* Number of phases, per page */
+
+static const struct i2c_device_id tps53679_id[];
+
+static int tps53679_identify_mode(struct i2c_client *client,
+				  struct pmbus_driver_info *info)
+{
+	u8 vout_params;
+	int i, ret;
+
+	for (i = 0; i < info->pages; i++) {
+		/* Read the register with VOUT scaling value.*/
+		ret = pmbus_read_byte_data(client, i, PMBUS_VOUT_MODE);
+		if (ret < 0)
+			return ret;
+
+		vout_params = ret & GENMASK(4, 0);
+
+		switch (vout_params) {
+		case TPS53679_PROT_VR13_10MV:
+		case TPS53679_PROT_VR12_5_10MV:
+			info->vrm_version[i] = vr13;
+			break;
+		case TPS53679_PROT_VR13_5MV:
+		case TPS53679_PROT_VR12_5MV:
+		case TPS53679_PROT_IMVP8_5MV:
+			info->vrm_version[i] = vr12;
+			break;
+		default:
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+static int tps53679_identify_phases(struct i2c_client *client,
+				    struct pmbus_driver_info *info)
+{
+	int ret;
+
+	/* On TPS53681, only channel A provides per-phase output current */
+	ret = pmbus_read_byte_data(client, 0, TPS53681_MFR_SPECIFIC_20);
+	if (ret < 0)
+		return ret;
+	info->phases[0] = (ret & 0x07) + 1;
+
+	return 0;
+}
+
+static int tps53679_identify_chip(struct i2c_client *client,
+				  u8 revision, u16 id)
+{
+	u8 buf[I2C_SMBUS_BLOCK_MAX];
+	int ret;
+
+	ret = pmbus_read_byte_data(client, 0, PMBUS_REVISION);
+	if (ret < 0)
+		return ret;
+	if (ret != revision) {
+		dev_err(&client->dev, "Unexpected PMBus revision 0x%x\n", ret);
+		return -ENODEV;
+	}
+
+	ret = i2c_smbus_read_block_data(client, PMBUS_IC_DEVICE_ID, buf);
+	if (ret < 0)
+		return ret;
+	if (ret != 1 || buf[0] != id) {
+		dev_err(&client->dev, "Unexpected device ID 0x%x\n", buf[0]);
+		return -ENODEV;
+	}
+	return 0;
+}
+
+/*
+ * Common identification function for chips with multi-phase support.
+ * Since those chips have special configuration registers, we want to have
+ * some level of reassurance that we are really talking with the chip
+ * being probed. Check PMBus revision and chip ID.
+ */
+static int tps53679_identify_multiphase(struct i2c_client *client,
+					struct pmbus_driver_info *info,
+					int pmbus_rev, int device_id)
+{
+	int ret;
+
+	ret = tps53679_identify_chip(client, pmbus_rev, device_id);
+	if (ret < 0)
+		return ret;
+
+	ret = tps53679_identify_mode(client, info);
+	if (ret < 0)
+		return ret;
+
+	return tps53679_identify_phases(client, info);
+}
+
+static int tps53679_identify(struct i2c_client *client,
+			     struct pmbus_driver_info *info)
+{
+	return tps53679_identify_mode(client, info);
+}
+
+static int tps53681_identify(struct i2c_client *client,
+			     struct pmbus_driver_info *info)
+{
+	return tps53679_identify_multiphase(client, info,
+					    TPS53681_PMBUS_REVISION,
+					    TPS53681_DEVICE_ID);
+}
+
+static int tps53676_identify(struct i2c_client *client,
+			     struct pmbus_driver_info *info)
+{
+	u8 buf[I2C_SMBUS_BLOCK_MAX];
+	int phases_a = 0, phases_b = 0;
+	int i, ret;
+
+	ret = i2c_smbus_read_block_data(client, PMBUS_IC_DEVICE_ID, buf);
+	if (ret < 0)
+		return ret;
+	if (strncmp("TI\x53\x67\x60", buf, 5)) {
+		dev_err(&client->dev, "Unexpected device ID: %s\n", buf);
+		return -ENODEV;
+	}
+
+	ret = i2c_smbus_read_block_data(client, TPS53676_USER_DATA_03, buf);
+	if (ret < 0)
+		return ret;
+	if (ret != 24)
+		return -EIO;
+	for (i = 0; i < 2 * TPS53676_MAX_PHASES; i += 2) {
+		if (buf[i + 1] & 0x80) {
+			if (buf[i] & 0x08)
+				phases_b++;
+			else
+				phases_a++;
+		}
+	}
+
+	info->format[PSC_VOLTAGE_OUT] = linear;
+	info->pages = 1;
+	info->phases[0] = phases_a;
+	if (phases_b > 0) {
+		info->pages = 2;
+		info->phases[1] = phases_b;
+	}
+	return 0;
+}
+
+static int tps53681_read_word_data(struct i2c_client *client, int page,
+				   int phase, int reg)
+{
+	/*
+	 * For reading the total output current (READ_IOUT) for all phases,
+	 * the chip datasheet is a bit vague. It says "PHASE must be set to
+	 * FFh to access all phases simultaneously. PHASE may also be set to
+	 * 80h readack (!) the total phase current".
+	 * Experiments show that the command does _not_ report the total
+	 * current for all phases if the phase is set to 0xff. Instead, it
+	 * appears to report the current of one of the phases. Override phase
+	 * parameter with 0x80 when reading the total output current on page 0.
+	 */
+	if (reg == PMBUS_READ_IOUT && page == 0 && phase == 0xff)
+		return pmbus_read_word_data(client, page, 0x80, reg);
+	return -ENODATA;
+}
+
+static struct pmbus_driver_info tps53679_info = {
+	.format[PSC_VOLTAGE_IN] = linear,
+	.format[PSC_VOLTAGE_OUT] = vid,
+	.format[PSC_TEMPERATURE] = linear,
+	.format[PSC_CURRENT_OUT] = linear,
+	.format[PSC_POWER] = linear,
+	.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN | PMBUS_HAVE_PIN |
+		PMBUS_HAVE_STATUS_INPUT |
+		PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+		PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+		PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP |
+		PMBUS_HAVE_POUT,
+	.func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+		PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+		PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP |
+		PMBUS_HAVE_POUT,
+	.pfunc[0] = PMBUS_HAVE_IOUT,
+	.pfunc[1] = PMBUS_HAVE_IOUT,
+	.pfunc[2] = PMBUS_HAVE_IOUT,
+	.pfunc[3] = PMBUS_HAVE_IOUT,
+	.pfunc[4] = PMBUS_HAVE_IOUT,
+	.pfunc[5] = PMBUS_HAVE_IOUT,
+	.pfunc[6] = PMBUS_HAVE_IOUT,
+};
+
+static int tps53679_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct pmbus_driver_info *info;
+	enum chips chip_id;
+
+	if (dev->of_node)
+		chip_id = (enum chips)of_device_get_match_data(dev);
+	else
+		chip_id = i2c_match_id(tps53679_id, client)->driver_data;
+
+	info = devm_kmemdup(dev, &tps53679_info, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	switch (chip_id) {
+	case tps53647:
+	case tps53667:
+		info->pages = TPS53647_PAGE_NUM;
+		info->identify = tps53679_identify;
+		break;
+	case tps53676:
+		info->identify = tps53676_identify;
+		break;
+	case tps53679:
+	case tps53688:
+		info->pages = TPS53679_PAGE_NUM;
+		info->identify = tps53679_identify;
+		break;
+	case tps53681:
+		info->pages = TPS53679_PAGE_NUM;
+		info->phases[0] = 6;
+		info->identify = tps53681_identify;
+		info->read_word_data = tps53681_read_word_data;
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	return pmbus_do_probe(client, info);
+}
+
+static const struct i2c_device_id tps53679_id[] = {
+	{"bmr474", tps53676},
+	{"tps53647", tps53647},
+	{"tps53667", tps53667},
+	{"tps53676", tps53676},
+	{"tps53679", tps53679},
+	{"tps53681", tps53681},
+	{"tps53688", tps53688},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, tps53679_id);
+
+static const struct of_device_id __maybe_unused tps53679_of_match[] = {
+	{.compatible = "ti,tps53647", .data = (void *)tps53647},
+	{.compatible = "ti,tps53667", .data = (void *)tps53667},
+	{.compatible = "ti,tps53676", .data = (void *)tps53676},
+	{.compatible = "ti,tps53679", .data = (void *)tps53679},
+	{.compatible = "ti,tps53681", .data = (void *)tps53681},
+	{.compatible = "ti,tps53688", .data = (void *)tps53688},
+	{}
+};
+MODULE_DEVICE_TABLE(of, tps53679_of_match);
+
+static struct i2c_driver tps53679_driver = {
+	.driver = {
+		.name = "tps53679",
+		.of_match_table = of_match_ptr(tps53679_of_match),
+	},
+	.probe_new = tps53679_probe,
+	.id_table = tps53679_id,
+};
+
+module_i2c_driver(tps53679_driver);
+
+MODULE_AUTHOR("Vadim Pasternak <vadimp@mellanox.com>");
+MODULE_DESCRIPTION("PMBus driver for Texas Instruments TPS53679");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/tps546d24.c b/drivers/hwmon/pmbus/tps546d24.c
new file mode 100644
index 000000000..435f94304
--- /dev/null
+++ b/drivers/hwmon/pmbus/tps546d24.c
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Hardware monitoring driver for TEXAS TPS546D24 buck converter
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pmbus.h>
+#include "pmbus.h"
+
+static struct pmbus_driver_info tps546d24_info = {
+	.pages = 1,
+	.format[PSC_VOLTAGE_IN] = linear,
+	.format[PSC_VOLTAGE_OUT] = linear,
+	.format[PSC_TEMPERATURE] = linear,
+	.format[PSC_CURRENT_OUT] = linear,
+	.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN
+			| PMBUS_HAVE_IOUT | PMBUS_HAVE_VOUT
+			| PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_VOUT
+			| PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+};
+
+static int tps546d24_probe(struct i2c_client *client)
+{
+	int reg;
+
+	reg = i2c_smbus_read_byte_data(client, PMBUS_VOUT_MODE);
+	if (reg < 0)
+		return reg;
+
+	if (reg & 0x80) {
+		int err;
+
+		err = i2c_smbus_write_byte_data(client, PMBUS_VOUT_MODE, reg & 0x7f);
+		if (err < 0)
+			return err;
+	}
+	return pmbus_do_probe(client, &tps546d24_info);
+}
+
+static const struct i2c_device_id tps546d24_id[] = {
+	{"tps546d24", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, tps546d24_id);
+
+static const struct of_device_id __maybe_unused tps546d24_of_match[] = {
+	{.compatible = "ti,tps546d24"},
+	{}
+};
+MODULE_DEVICE_TABLE(of, tps546d24_of_match);
+
+/* This is the driver that will be inserted */
+static struct i2c_driver tps546d24_driver = {
+	.driver = {
+		   .name = "tps546d24",
+		   .of_match_table = of_match_ptr(tps546d24_of_match),
+	   },
+	.probe_new = tps546d24_probe,
+	.id_table = tps546d24_id,
+};
+
+module_i2c_driver(tps546d24_driver);
+
+MODULE_AUTHOR("Duke Du <dukedu83@gmail.com>");
+MODULE_DESCRIPTION("PMBus driver for TI tps546d24");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/ucd9000.c b/drivers/hwmon/pmbus/ucd9000.c
new file mode 100644
index 000000000..3daaf2237
--- /dev/null
+++ b/drivers/hwmon/pmbus/ucd9000.c
@@ -0,0 +1,707 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Hardware monitoring driver for UCD90xxx Sequencer and System Health
+ * Controller series
+ *
+ * Copyright (C) 2011 Ericsson AB.
+ */
+
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/pmbus.h>
+#include <linux/gpio/driver.h>
+#include <linux/timekeeping.h>
+#include "pmbus.h"
+
+enum chips { ucd9000, ucd90120, ucd90124, ucd90160, ucd90320, ucd9090,
+	     ucd90910 };
+
+#define UCD9000_MONITOR_CONFIG		0xd5
+#define UCD9000_NUM_PAGES		0xd6
+#define UCD9000_FAN_CONFIG_INDEX	0xe7
+#define UCD9000_FAN_CONFIG		0xe8
+#define UCD9000_MFR_STATUS		0xf3
+#define UCD9000_GPIO_SELECT		0xfa
+#define UCD9000_GPIO_CONFIG		0xfb
+#define UCD9000_DEVICE_ID		0xfd
+
+/* GPIO CONFIG bits */
+#define UCD9000_GPIO_CONFIG_ENABLE	BIT(0)
+#define UCD9000_GPIO_CONFIG_OUT_ENABLE	BIT(1)
+#define UCD9000_GPIO_CONFIG_OUT_VALUE	BIT(2)
+#define UCD9000_GPIO_CONFIG_STATUS	BIT(3)
+#define UCD9000_GPIO_INPUT		0
+#define UCD9000_GPIO_OUTPUT		1
+
+#define UCD9000_MON_TYPE(x)	(((x) >> 5) & 0x07)
+#define UCD9000_MON_PAGE(x)	((x) & 0x1f)
+
+#define UCD9000_MON_VOLTAGE	1
+#define UCD9000_MON_TEMPERATURE	2
+#define UCD9000_MON_CURRENT	3
+#define UCD9000_MON_VOLTAGE_HW	4
+
+#define UCD9000_NUM_FAN		4
+
+#define UCD9000_GPIO_NAME_LEN	16
+#define UCD9090_NUM_GPIOS	23
+#define UCD901XX_NUM_GPIOS	26
+#define UCD90320_NUM_GPIOS	84
+#define UCD90910_NUM_GPIOS	26
+
+#define UCD9000_DEBUGFS_NAME_LEN	24
+#define UCD9000_GPI_COUNT		8
+#define UCD90320_GPI_COUNT		32
+
+struct ucd9000_data {
+	u8 fan_data[UCD9000_NUM_FAN][I2C_SMBUS_BLOCK_MAX];
+	struct pmbus_driver_info info;
+#ifdef CONFIG_GPIOLIB
+	struct gpio_chip gpio;
+#endif
+	struct dentry *debugfs;
+	ktime_t write_time;
+};
+#define to_ucd9000_data(_info) container_of(_info, struct ucd9000_data, info)
+
+struct ucd9000_debugfs_entry {
+	struct i2c_client *client;
+	u8 index;
+};
+
+/*
+ * It has been observed that the UCD90320 randomly fails register access when
+ * doing another access right on the back of a register write. To mitigate this
+ * make sure that there is a minimum delay between a write access and the
+ * following access. The 250us is based on experimental data. At a delay of
+ * 200us the issue seems to go away. Add a bit of extra margin to allow for
+ * system to system differences.
+ */
+#define UCD90320_WAIT_DELAY_US 250
+
+static inline void ucd90320_wait(const struct ucd9000_data *data)
+{
+	s64 delta = ktime_us_delta(ktime_get(), data->write_time);
+
+	if (delta < UCD90320_WAIT_DELAY_US)
+		udelay(UCD90320_WAIT_DELAY_US - delta);
+}
+
+static int ucd90320_read_word_data(struct i2c_client *client, int page,
+				   int phase, int reg)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	struct ucd9000_data *data = to_ucd9000_data(info);
+
+	if (reg >= PMBUS_VIRT_BASE)
+		return -ENXIO;
+
+	ucd90320_wait(data);
+	return pmbus_read_word_data(client, page, phase, reg);
+}
+
+static int ucd90320_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	struct ucd9000_data *data = to_ucd9000_data(info);
+
+	ucd90320_wait(data);
+	return pmbus_read_byte_data(client, page, reg);
+}
+
+static int ucd90320_write_word_data(struct i2c_client *client, int page,
+				    int reg, u16 word)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	struct ucd9000_data *data = to_ucd9000_data(info);
+	int ret;
+
+	ucd90320_wait(data);
+	ret = pmbus_write_word_data(client, page, reg, word);
+	data->write_time = ktime_get();
+
+	return ret;
+}
+
+static int ucd90320_write_byte(struct i2c_client *client, int page, u8 value)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	struct ucd9000_data *data = to_ucd9000_data(info);
+	int ret;
+
+	ucd90320_wait(data);
+	ret = pmbus_write_byte(client, page, value);
+	data->write_time = ktime_get();
+
+	return ret;
+}
+
+static int ucd9000_get_fan_config(struct i2c_client *client, int fan)
+{
+	int fan_config = 0;
+	struct ucd9000_data *data
+	  = to_ucd9000_data(pmbus_get_driver_info(client));
+
+	if (data->fan_data[fan][3] & 1)
+		fan_config |= PB_FAN_2_INSTALLED;   /* Use lower bit position */
+
+	/* Pulses/revolution */
+	fan_config |= (data->fan_data[fan][3] & 0x06) >> 1;
+
+	return fan_config;
+}
+
+static int ucd9000_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+	int ret = 0;
+	int fan_config;
+
+	switch (reg) {
+	case PMBUS_FAN_CONFIG_12:
+		if (page > 0)
+			return -ENXIO;
+
+		ret = ucd9000_get_fan_config(client, 0);
+		if (ret < 0)
+			return ret;
+		fan_config = ret << 4;
+		ret = ucd9000_get_fan_config(client, 1);
+		if (ret < 0)
+			return ret;
+		fan_config |= ret;
+		ret = fan_config;
+		break;
+	case PMBUS_FAN_CONFIG_34:
+		if (page > 0)
+			return -ENXIO;
+
+		ret = ucd9000_get_fan_config(client, 2);
+		if (ret < 0)
+			return ret;
+		fan_config = ret << 4;
+		ret = ucd9000_get_fan_config(client, 3);
+		if (ret < 0)
+			return ret;
+		fan_config |= ret;
+		ret = fan_config;
+		break;
+	default:
+		ret = -ENODATA;
+		break;
+	}
+	return ret;
+}
+
+static const struct i2c_device_id ucd9000_id[] = {
+	{"ucd9000", ucd9000},
+	{"ucd90120", ucd90120},
+	{"ucd90124", ucd90124},
+	{"ucd90160", ucd90160},
+	{"ucd90320", ucd90320},
+	{"ucd9090", ucd9090},
+	{"ucd90910", ucd90910},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, ucd9000_id);
+
+static const struct of_device_id __maybe_unused ucd9000_of_match[] = {
+	{
+		.compatible = "ti,ucd9000",
+		.data = (void *)ucd9000
+	},
+	{
+		.compatible = "ti,ucd90120",
+		.data = (void *)ucd90120
+	},
+	{
+		.compatible = "ti,ucd90124",
+		.data = (void *)ucd90124
+	},
+	{
+		.compatible = "ti,ucd90160",
+		.data = (void *)ucd90160
+	},
+	{
+		.compatible = "ti,ucd90320",
+		.data = (void *)ucd90320
+	},
+	{
+		.compatible = "ti,ucd9090",
+		.data = (void *)ucd9090
+	},
+	{
+		.compatible = "ti,ucd90910",
+		.data = (void *)ucd90910
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ucd9000_of_match);
+
+#ifdef CONFIG_GPIOLIB
+static int ucd9000_gpio_read_config(struct i2c_client *client,
+				    unsigned int offset)
+{
+	int ret;
+
+	/* No page set required */
+	ret = i2c_smbus_write_byte_data(client, UCD9000_GPIO_SELECT, offset);
+	if (ret < 0)
+		return ret;
+
+	return i2c_smbus_read_byte_data(client, UCD9000_GPIO_CONFIG);
+}
+
+static int ucd9000_gpio_get(struct gpio_chip *gc, unsigned int offset)
+{
+	struct i2c_client *client  = gpiochip_get_data(gc);
+	int ret;
+
+	ret = ucd9000_gpio_read_config(client, offset);
+	if (ret < 0)
+		return ret;
+
+	return !!(ret & UCD9000_GPIO_CONFIG_STATUS);
+}
+
+static void ucd9000_gpio_set(struct gpio_chip *gc, unsigned int offset,
+			     int value)
+{
+	struct i2c_client *client = gpiochip_get_data(gc);
+	int ret;
+
+	ret = ucd9000_gpio_read_config(client, offset);
+	if (ret < 0) {
+		dev_dbg(&client->dev, "failed to read GPIO %d config: %d\n",
+			offset, ret);
+		return;
+	}
+
+	if (value) {
+		if (ret & UCD9000_GPIO_CONFIG_STATUS)
+			return;
+
+		ret |= UCD9000_GPIO_CONFIG_STATUS;
+	} else {
+		if (!(ret & UCD9000_GPIO_CONFIG_STATUS))
+			return;
+
+		ret &= ~UCD9000_GPIO_CONFIG_STATUS;
+	}
+
+	ret |= UCD9000_GPIO_CONFIG_ENABLE;
+
+	/* Page set not required */
+	ret = i2c_smbus_write_byte_data(client, UCD9000_GPIO_CONFIG, ret);
+	if (ret < 0) {
+		dev_dbg(&client->dev, "Failed to write GPIO %d config: %d\n",
+			offset, ret);
+		return;
+	}
+
+	ret &= ~UCD9000_GPIO_CONFIG_ENABLE;
+
+	ret = i2c_smbus_write_byte_data(client, UCD9000_GPIO_CONFIG, ret);
+	if (ret < 0)
+		dev_dbg(&client->dev, "Failed to write GPIO %d config: %d\n",
+			offset, ret);
+}
+
+static int ucd9000_gpio_get_direction(struct gpio_chip *gc,
+				      unsigned int offset)
+{
+	struct i2c_client *client = gpiochip_get_data(gc);
+	int ret;
+
+	ret = ucd9000_gpio_read_config(client, offset);
+	if (ret < 0)
+		return ret;
+
+	return !(ret & UCD9000_GPIO_CONFIG_OUT_ENABLE);
+}
+
+static int ucd9000_gpio_set_direction(struct gpio_chip *gc,
+				      unsigned int offset, bool direction_out,
+				      int requested_out)
+{
+	struct i2c_client *client = gpiochip_get_data(gc);
+	int ret, config, out_val;
+
+	ret = ucd9000_gpio_read_config(client, offset);
+	if (ret < 0)
+		return ret;
+
+	if (direction_out) {
+		out_val = requested_out ? UCD9000_GPIO_CONFIG_OUT_VALUE : 0;
+
+		if (ret & UCD9000_GPIO_CONFIG_OUT_ENABLE) {
+			if ((ret & UCD9000_GPIO_CONFIG_OUT_VALUE) == out_val)
+				return 0;
+		} else {
+			ret |= UCD9000_GPIO_CONFIG_OUT_ENABLE;
+		}
+
+		if (out_val)
+			ret |= UCD9000_GPIO_CONFIG_OUT_VALUE;
+		else
+			ret &= ~UCD9000_GPIO_CONFIG_OUT_VALUE;
+
+	} else {
+		if (!(ret & UCD9000_GPIO_CONFIG_OUT_ENABLE))
+			return 0;
+
+		ret &= ~UCD9000_GPIO_CONFIG_OUT_ENABLE;
+	}
+
+	ret |= UCD9000_GPIO_CONFIG_ENABLE;
+	config = ret;
+
+	/* Page set not required */
+	ret = i2c_smbus_write_byte_data(client, UCD9000_GPIO_CONFIG, config);
+	if (ret < 0)
+		return ret;
+
+	config &= ~UCD9000_GPIO_CONFIG_ENABLE;
+
+	return i2c_smbus_write_byte_data(client, UCD9000_GPIO_CONFIG, config);
+}
+
+static int ucd9000_gpio_direction_input(struct gpio_chip *gc,
+					unsigned int offset)
+{
+	return ucd9000_gpio_set_direction(gc, offset, UCD9000_GPIO_INPUT, 0);
+}
+
+static int ucd9000_gpio_direction_output(struct gpio_chip *gc,
+					 unsigned int offset, int val)
+{
+	return ucd9000_gpio_set_direction(gc, offset, UCD9000_GPIO_OUTPUT,
+					  val);
+}
+
+static void ucd9000_probe_gpio(struct i2c_client *client,
+			       const struct i2c_device_id *mid,
+			       struct ucd9000_data *data)
+{
+	int rc;
+
+	switch (mid->driver_data) {
+	case ucd9090:
+		data->gpio.ngpio = UCD9090_NUM_GPIOS;
+		break;
+	case ucd90120:
+	case ucd90124:
+	case ucd90160:
+		data->gpio.ngpio = UCD901XX_NUM_GPIOS;
+		break;
+	case ucd90320:
+		data->gpio.ngpio = UCD90320_NUM_GPIOS;
+		break;
+	case ucd90910:
+		data->gpio.ngpio = UCD90910_NUM_GPIOS;
+		break;
+	default:
+		return; /* GPIO support is optional. */
+	}
+
+	/*
+	 * Pinmux support has not been added to the new gpio_chip.
+	 * This support should be added when possible given the mux
+	 * behavior of these IO devices.
+	 */
+	data->gpio.label = client->name;
+	data->gpio.get_direction = ucd9000_gpio_get_direction;
+	data->gpio.direction_input = ucd9000_gpio_direction_input;
+	data->gpio.direction_output = ucd9000_gpio_direction_output;
+	data->gpio.get = ucd9000_gpio_get;
+	data->gpio.set = ucd9000_gpio_set;
+	data->gpio.can_sleep = true;
+	data->gpio.base = -1;
+	data->gpio.parent = &client->dev;
+
+	rc = devm_gpiochip_add_data(&client->dev, &data->gpio, client);
+	if (rc)
+		dev_warn(&client->dev, "Could not add gpiochip: %d\n", rc);
+}
+#else
+static void ucd9000_probe_gpio(struct i2c_client *client,
+			       const struct i2c_device_id *mid,
+			       struct ucd9000_data *data)
+{
+}
+#endif /* CONFIG_GPIOLIB */
+
+#ifdef CONFIG_DEBUG_FS
+static int ucd9000_get_mfr_status(struct i2c_client *client, u8 *buffer)
+{
+	int ret = pmbus_set_page(client, 0, 0xff);
+
+	if (ret < 0)
+		return ret;
+
+	return i2c_smbus_read_block_data(client, UCD9000_MFR_STATUS, buffer);
+}
+
+static int ucd9000_debugfs_show_mfr_status_bit(void *data, u64 *val)
+{
+	struct ucd9000_debugfs_entry *entry = data;
+	struct i2c_client *client = entry->client;
+	u8 buffer[I2C_SMBUS_BLOCK_MAX];
+	int ret, i;
+
+	ret = ucd9000_get_mfr_status(client, buffer);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * GPI fault bits are in sets of 8, two bytes from end of response.
+	 */
+	i = ret - 3 - entry->index / 8;
+	if (i >= 0)
+		*val = !!(buffer[i] & BIT(entry->index % 8));
+
+	return 0;
+}
+DEFINE_DEBUGFS_ATTRIBUTE(ucd9000_debugfs_mfr_status_bit,
+			 ucd9000_debugfs_show_mfr_status_bit, NULL, "%1lld\n");
+
+static ssize_t ucd9000_debugfs_read_mfr_status(struct file *file,
+					       char __user *buf, size_t count,
+					       loff_t *ppos)
+{
+	struct i2c_client *client = file->private_data;
+	u8 buffer[I2C_SMBUS_BLOCK_MAX];
+	char str[(I2C_SMBUS_BLOCK_MAX * 2) + 2];
+	char *res;
+	int rc;
+
+	rc = ucd9000_get_mfr_status(client, buffer);
+	if (rc < 0)
+		return rc;
+
+	res = bin2hex(str, buffer, min(rc, I2C_SMBUS_BLOCK_MAX));
+	*res++ = '\n';
+	*res = 0;
+
+	return simple_read_from_buffer(buf, count, ppos, str, res - str);
+}
+
+static const struct file_operations ucd9000_debugfs_show_mfr_status_fops = {
+	.llseek = noop_llseek,
+	.read = ucd9000_debugfs_read_mfr_status,
+	.open = simple_open,
+};
+
+static int ucd9000_init_debugfs(struct i2c_client *client,
+				const struct i2c_device_id *mid,
+				struct ucd9000_data *data)
+{
+	struct dentry *debugfs;
+	struct ucd9000_debugfs_entry *entries;
+	int i, gpi_count;
+	char name[UCD9000_DEBUGFS_NAME_LEN];
+
+	debugfs = pmbus_get_debugfs_dir(client);
+	if (!debugfs)
+		return -ENOENT;
+
+	data->debugfs = debugfs_create_dir(client->name, debugfs);
+	if (!data->debugfs)
+		return -ENOENT;
+
+	/*
+	 * Of the chips this driver supports, only the UCD9090, UCD90160,
+	 * UCD90320, and UCD90910 report GPI faults in their MFR_STATUS
+	 * register, so only create the GPI fault debugfs attributes for those
+	 * chips.
+	 */
+	if (mid->driver_data == ucd9090 || mid->driver_data == ucd90160 ||
+	    mid->driver_data == ucd90320 || mid->driver_data == ucd90910) {
+		gpi_count = mid->driver_data == ucd90320 ? UCD90320_GPI_COUNT
+							 : UCD9000_GPI_COUNT;
+		entries = devm_kcalloc(&client->dev,
+				       gpi_count, sizeof(*entries),
+				       GFP_KERNEL);
+		if (!entries)
+			return -ENOMEM;
+
+		for (i = 0; i < gpi_count; i++) {
+			entries[i].client = client;
+			entries[i].index = i;
+			scnprintf(name, UCD9000_DEBUGFS_NAME_LEN,
+				  "gpi%d_alarm", i + 1);
+			debugfs_create_file(name, 0444, data->debugfs,
+					    &entries[i],
+					    &ucd9000_debugfs_mfr_status_bit);
+		}
+	}
+
+	scnprintf(name, UCD9000_DEBUGFS_NAME_LEN, "mfr_status");
+	debugfs_create_file(name, 0444, data->debugfs, client,
+			    &ucd9000_debugfs_show_mfr_status_fops);
+
+	return 0;
+}
+#else
+static int ucd9000_init_debugfs(struct i2c_client *client,
+				const struct i2c_device_id *mid,
+				struct ucd9000_data *data)
+{
+	return 0;
+}
+#endif /* CONFIG_DEBUG_FS */
+
+static int ucd9000_probe(struct i2c_client *client)
+{
+	u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1];
+	struct ucd9000_data *data;
+	struct pmbus_driver_info *info;
+	const struct i2c_device_id *mid;
+	enum chips chip;
+	int i, ret;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_BYTE_DATA |
+				     I2C_FUNC_SMBUS_BLOCK_DATA))
+		return -ENODEV;
+
+	ret = i2c_smbus_read_block_data(client, UCD9000_DEVICE_ID,
+					block_buffer);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to read device ID\n");
+		return ret;
+	}
+	block_buffer[ret] = '\0';
+	dev_info(&client->dev, "Device ID %s\n", block_buffer);
+
+	for (mid = ucd9000_id; mid->name[0]; mid++) {
+		if (!strncasecmp(mid->name, block_buffer, strlen(mid->name)))
+			break;
+	}
+	if (!mid->name[0]) {
+		dev_err(&client->dev, "Unsupported device\n");
+		return -ENODEV;
+	}
+
+	if (client->dev.of_node)
+		chip = (enum chips)of_device_get_match_data(&client->dev);
+	else
+		chip = mid->driver_data;
+
+	if (chip != ucd9000 && strcmp(client->name, mid->name) != 0)
+		dev_notice(&client->dev,
+			   "Device mismatch: Configured %s, detected %s\n",
+			   client->name, mid->name);
+
+	data = devm_kzalloc(&client->dev, sizeof(struct ucd9000_data),
+			    GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+	info = &data->info;
+
+	ret = i2c_smbus_read_byte_data(client, UCD9000_NUM_PAGES);
+	if (ret < 0) {
+		dev_err(&client->dev,
+			"Failed to read number of active pages\n");
+		return ret;
+	}
+	info->pages = ret;
+	if (!info->pages) {
+		dev_err(&client->dev, "No pages configured\n");
+		return -ENODEV;
+	}
+
+	/* The internal temperature sensor is always active */
+	info->func[0] = PMBUS_HAVE_TEMP;
+
+	/* Everything else is configurable */
+	ret = i2c_smbus_read_block_data(client, UCD9000_MONITOR_CONFIG,
+					block_buffer);
+	if (ret <= 0) {
+		dev_err(&client->dev, "Failed to read configuration data\n");
+		return -ENODEV;
+	}
+	for (i = 0; i < ret; i++) {
+		int page = UCD9000_MON_PAGE(block_buffer[i]);
+
+		if (page >= info->pages)
+			continue;
+
+		switch (UCD9000_MON_TYPE(block_buffer[i])) {
+		case UCD9000_MON_VOLTAGE:
+		case UCD9000_MON_VOLTAGE_HW:
+			info->func[page] |= PMBUS_HAVE_VOUT
+			  | PMBUS_HAVE_STATUS_VOUT;
+			break;
+		case UCD9000_MON_TEMPERATURE:
+			info->func[page] |= PMBUS_HAVE_TEMP2
+			  | PMBUS_HAVE_STATUS_TEMP;
+			break;
+		case UCD9000_MON_CURRENT:
+			info->func[page] |= PMBUS_HAVE_IOUT
+			  | PMBUS_HAVE_STATUS_IOUT;
+			break;
+		default:
+			break;
+		}
+	}
+
+	/* Fan configuration */
+	if (mid->driver_data == ucd90124) {
+		for (i = 0; i < UCD9000_NUM_FAN; i++) {
+			i2c_smbus_write_byte_data(client,
+						  UCD9000_FAN_CONFIG_INDEX, i);
+			ret = i2c_smbus_read_block_data(client,
+							UCD9000_FAN_CONFIG,
+							data->fan_data[i]);
+			if (ret < 0)
+				return ret;
+		}
+		i2c_smbus_write_byte_data(client, UCD9000_FAN_CONFIG_INDEX, 0);
+
+		info->read_byte_data = ucd9000_read_byte_data;
+		info->func[0] |= PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12
+		  | PMBUS_HAVE_FAN34 | PMBUS_HAVE_STATUS_FAN34;
+	} else if (mid->driver_data == ucd90320) {
+		info->read_byte_data = ucd90320_read_byte_data;
+		info->read_word_data = ucd90320_read_word_data;
+		info->write_byte = ucd90320_write_byte;
+		info->write_word_data = ucd90320_write_word_data;
+	}
+
+	ucd9000_probe_gpio(client, mid, data);
+
+	ret = pmbus_do_probe(client, info);
+	if (ret)
+		return ret;
+
+	ret = ucd9000_init_debugfs(client, mid, data);
+	if (ret)
+		dev_warn(&client->dev, "Failed to register debugfs: %d\n",
+			 ret);
+
+	return 0;
+}
+
+/* This is the driver that will be inserted */
+static struct i2c_driver ucd9000_driver = {
+	.driver = {
+		.name = "ucd9000",
+		.of_match_table = of_match_ptr(ucd9000_of_match),
+	},
+	.probe_new = ucd9000_probe,
+	.id_table = ucd9000_id,
+};
+
+module_i2c_driver(ucd9000_driver);
+
+MODULE_AUTHOR("Guenter Roeck");
+MODULE_DESCRIPTION("PMBus driver for TI UCD90xxx");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/ucd9200.c b/drivers/hwmon/pmbus/ucd9200.c
new file mode 100644
index 000000000..3ad375a76
--- /dev/null
+++ b/drivers/hwmon/pmbus/ucd9200.c
@@ -0,0 +1,212 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Hardware monitoring driver for ucd9200 series Digital PWM System Controllers
+ *
+ * Copyright (C) 2011 Ericsson AB.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/pmbus.h>
+#include "pmbus.h"
+
+#define UCD9200_PHASE_INFO	0xd2
+#define UCD9200_DEVICE_ID	0xfd
+
+enum chips { ucd9200, ucd9220, ucd9222, ucd9224, ucd9240, ucd9244, ucd9246,
+	     ucd9248 };
+
+static const struct i2c_device_id ucd9200_id[] = {
+	{"ucd9200", ucd9200},
+	{"ucd9220", ucd9220},
+	{"ucd9222", ucd9222},
+	{"ucd9224", ucd9224},
+	{"ucd9240", ucd9240},
+	{"ucd9244", ucd9244},
+	{"ucd9246", ucd9246},
+	{"ucd9248", ucd9248},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, ucd9200_id);
+
+static const struct of_device_id __maybe_unused ucd9200_of_match[] = {
+	{
+		.compatible = "ti,cd9200",
+		.data = (void *)ucd9200
+	},
+	{
+		.compatible = "ti,cd9220",
+		.data = (void *)ucd9220
+	},
+	{
+		.compatible = "ti,cd9222",
+		.data = (void *)ucd9222
+	},
+	{
+		.compatible = "ti,cd9224",
+		.data = (void *)ucd9224
+	},
+	{
+		.compatible = "ti,cd9240",
+		.data = (void *)ucd9240
+	},
+	{
+		.compatible = "ti,cd9244",
+		.data = (void *)ucd9244
+	},
+	{
+		.compatible = "ti,cd9246",
+		.data = (void *)ucd9246
+	},
+	{
+		.compatible = "ti,cd9248",
+		.data = (void *)ucd9248
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ucd9200_of_match);
+
+static int ucd9200_probe(struct i2c_client *client)
+{
+	u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1];
+	struct pmbus_driver_info *info;
+	const struct i2c_device_id *mid;
+	enum chips chip;
+	int i, j, ret;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_BYTE_DATA |
+				     I2C_FUNC_SMBUS_BLOCK_DATA))
+		return -ENODEV;
+
+	ret = i2c_smbus_read_block_data(client, UCD9200_DEVICE_ID,
+					block_buffer);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to read device ID\n");
+		return ret;
+	}
+	block_buffer[ret] = '\0';
+	dev_info(&client->dev, "Device ID %s\n", block_buffer);
+
+	for (mid = ucd9200_id; mid->name[0]; mid++) {
+		if (!strncasecmp(mid->name, block_buffer, strlen(mid->name)))
+			break;
+	}
+	if (!mid->name[0]) {
+		dev_err(&client->dev, "Unsupported device\n");
+		return -ENODEV;
+	}
+
+	if (client->dev.of_node)
+		chip = (enum chips)of_device_get_match_data(&client->dev);
+	else
+		chip = mid->driver_data;
+
+	if (chip != ucd9200 && strcmp(client->name, mid->name) != 0)
+		dev_notice(&client->dev,
+			   "Device mismatch: Configured %s, detected %s\n",
+			   client->name, mid->name);
+
+	info = devm_kzalloc(&client->dev, sizeof(struct pmbus_driver_info),
+			    GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	ret = i2c_smbus_read_block_data(client, UCD9200_PHASE_INFO,
+					block_buffer);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to read phase information\n");
+		return ret;
+	}
+
+	/*
+	 * Calculate number of configured pages (rails) from PHASE_INFO
+	 * register.
+	 * Rails have to be sequential, so we can abort after finding
+	 * the first unconfigured rail.
+	 */
+	info->pages = 0;
+	for (i = 0; i < ret; i++) {
+		if (!block_buffer[i])
+			break;
+		info->pages++;
+	}
+	if (!info->pages) {
+		dev_err(&client->dev, "No rails configured\n");
+		return -ENODEV;
+	}
+	dev_info(&client->dev, "%d rails configured\n", info->pages);
+
+	/*
+	 * Set PHASE registers on all pages to 0xff to ensure that phase
+	 * specific commands will apply to all phases of a given page (rail).
+	 * This only affects the READ_IOUT and READ_TEMPERATURE2 registers.
+	 * READ_IOUT will return the sum of currents of all phases of a rail,
+	 * and READ_TEMPERATURE2 will return the maximum temperature detected
+	 * for the phases of the rail.
+	 */
+	for (i = 0; i < info->pages; i++) {
+		/*
+		 * Setting PAGE & PHASE fails once in a while for no obvious
+		 * reason, so we need to retry a couple of times.
+		 */
+		for (j = 0; j < 3; j++) {
+			ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, i);
+			if (ret < 0)
+				continue;
+			ret = i2c_smbus_write_byte_data(client, PMBUS_PHASE,
+							0xff);
+			if (ret < 0)
+				continue;
+			break;
+		}
+		if (ret < 0) {
+			dev_err(&client->dev,
+				"Failed to initialize PHASE registers\n");
+			return ret;
+		}
+	}
+	if (info->pages > 1)
+		i2c_smbus_write_byte_data(client, PMBUS_PAGE, 0);
+
+	info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT |
+			PMBUS_HAVE_IIN | PMBUS_HAVE_PIN |
+			PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+			PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+			PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP |
+			PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP;
+
+	for (i = 1; i < info->pages; i++)
+		info->func[i] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+			PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+			PMBUS_HAVE_POUT |
+			PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP;
+
+	/* ucd9240 supports a single fan */
+	if (mid->driver_data == ucd9240)
+		info->func[0] |= PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12;
+
+	return pmbus_do_probe(client, info);
+}
+
+/* This is the driver that will be inserted */
+static struct i2c_driver ucd9200_driver = {
+	.driver = {
+		.name = "ucd9200",
+		.of_match_table = of_match_ptr(ucd9200_of_match),
+	},
+	.probe_new = ucd9200_probe,
+	.id_table = ucd9200_id,
+};
+
+module_i2c_driver(ucd9200_driver);
+
+MODULE_AUTHOR("Guenter Roeck");
+MODULE_DESCRIPTION("PMBus driver for TI UCD922x, UCD924x");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/xdpe12284.c b/drivers/hwmon/pmbus/xdpe12284.c
new file mode 100644
index 000000000..32bc7736d
--- /dev/null
+++ b/drivers/hwmon/pmbus/xdpe12284.c
@@ -0,0 +1,197 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Hardware monitoring driver for Infineon Multi-phase Digital VR Controllers
+ *
+ * Copyright (c) 2020 Mellanox Technologies. All rights reserved.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regulator/driver.h>
+
+#include "pmbus.h"
+
+#define XDPE122_PROT_VR12_5MV		0x01 /* VR12.0 mode, 5-mV DAC */
+#define XDPE122_PROT_VR12_5_10MV	0x02 /* VR12.5 mode, 10-mV DAC */
+#define XDPE122_PROT_IMVP9_10MV		0x03 /* IMVP9 mode, 10-mV DAC */
+#define XDPE122_AMD_625MV		0x10 /* AMD mode 6.25mV */
+#define XDPE122_PAGE_NUM		2
+
+static int xdpe122_read_word_data(struct i2c_client *client, int page,
+				  int phase, int reg)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	long val;
+	s16 exponent;
+	s32 mantissa;
+	int ret;
+
+	switch (reg) {
+	case PMBUS_VOUT_OV_FAULT_LIMIT:
+	case PMBUS_VOUT_UV_FAULT_LIMIT:
+		ret = pmbus_read_word_data(client, page, phase, reg);
+		if (ret < 0)
+			return ret;
+
+		/* Convert register value to LINEAR11 data. */
+		exponent = ((s16)ret) >> 11;
+		mantissa = ((s16)((ret & GENMASK(10, 0)) << 5)) >> 5;
+		val = mantissa * 1000L;
+		if (exponent >= 0)
+			val <<= exponent;
+		else
+			val >>= -exponent;
+
+		/* Convert data to VID register. */
+		switch (info->vrm_version[page]) {
+		case vr13:
+			if (val >= 500)
+				return 1 + DIV_ROUND_CLOSEST(val - 500, 10);
+			return 0;
+		case vr12:
+			if (val >= 250)
+				return 1 + DIV_ROUND_CLOSEST(val - 250, 5);
+			return 0;
+		case imvp9:
+			if (val >= 200)
+				return 1 + DIV_ROUND_CLOSEST(val - 200, 10);
+			return 0;
+		case amd625mv:
+			if (val >= 200 && val <= 1550)
+				return DIV_ROUND_CLOSEST((1550 - val) * 100,
+							 625);
+			return 0;
+		default:
+			return -EINVAL;
+		}
+	default:
+		return -ENODATA;
+	}
+
+	return 0;
+}
+
+static int xdpe122_identify(struct i2c_client *client,
+			    struct pmbus_driver_info *info)
+{
+	u8 vout_params;
+	int i, ret, vout_mode;
+
+	vout_mode = pmbus_read_byte_data(client, 0, PMBUS_VOUT_MODE);
+	if (vout_mode >= 0 && vout_mode != 0xff) {
+		switch (vout_mode >> 5) {
+		case 0:
+			info->format[PSC_VOLTAGE_OUT] = linear;
+			return 0;
+		case 1:
+			info->format[PSC_VOLTAGE_OUT] = vid;
+			info->read_word_data = xdpe122_read_word_data;
+			break;
+		default:
+			return -ENODEV;
+		}
+	}
+
+	for (i = 0; i < XDPE122_PAGE_NUM; i++) {
+		/* Read the register with VOUT scaling value.*/
+		ret = pmbus_read_byte_data(client, i, PMBUS_VOUT_MODE);
+		if (ret < 0)
+			return ret;
+
+		vout_params = ret & GENMASK(4, 0);
+
+		switch (vout_params) {
+		case XDPE122_PROT_VR12_5_10MV:
+			info->vrm_version[i] = vr13;
+			break;
+		case XDPE122_PROT_VR12_5MV:
+			info->vrm_version[i] = vr12;
+			break;
+		case XDPE122_PROT_IMVP9_10MV:
+			info->vrm_version[i] = imvp9;
+			break;
+		case XDPE122_AMD_625MV:
+			info->vrm_version[i] = amd625mv;
+			break;
+		default:
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+static const struct regulator_desc __maybe_unused xdpe122_reg_desc[] = {
+	PMBUS_REGULATOR("vout", 0),
+	PMBUS_REGULATOR("vout", 1),
+};
+
+static struct pmbus_driver_info xdpe122_info = {
+	.pages = XDPE122_PAGE_NUM,
+	.format[PSC_VOLTAGE_IN] = linear,
+	.format[PSC_TEMPERATURE] = linear,
+	.format[PSC_CURRENT_IN] = linear,
+	.format[PSC_CURRENT_OUT] = linear,
+	.format[PSC_POWER] = linear,
+	.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+		PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+		PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP |
+		PMBUS_HAVE_POUT | PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT,
+	.func[1] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+		PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+		PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP |
+		PMBUS_HAVE_POUT | PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT,
+	.identify = xdpe122_identify,
+#if IS_ENABLED(CONFIG_SENSORS_XDPE122_REGULATOR)
+	.num_regulators = 2,
+	.reg_desc = xdpe122_reg_desc,
+#endif
+};
+
+static int xdpe122_probe(struct i2c_client *client)
+{
+	struct pmbus_driver_info *info;
+
+	info = devm_kmemdup(&client->dev, &xdpe122_info, sizeof(*info),
+			    GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	return pmbus_do_probe(client, info);
+}
+
+static const struct i2c_device_id xdpe122_id[] = {
+	{"xdpe11280", 0},
+	{"xdpe12254", 0},
+	{"xdpe12284", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, xdpe122_id);
+
+static const struct of_device_id __maybe_unused xdpe122_of_match[] = {
+	{.compatible = "infineon,xdpe11280"},
+	{.compatible = "infineon,xdpe12254"},
+	{.compatible = "infineon,xdpe12284"},
+	{}
+};
+MODULE_DEVICE_TABLE(of, xdpe122_of_match);
+
+static struct i2c_driver xdpe122_driver = {
+	.driver = {
+		.name = "xdpe12284",
+		.of_match_table = of_match_ptr(xdpe122_of_match),
+	},
+	.probe_new = xdpe122_probe,
+	.id_table = xdpe122_id,
+};
+
+module_i2c_driver(xdpe122_driver);
+
+MODULE_AUTHOR("Vadim Pasternak <vadimp@mellanox.com>");
+MODULE_DESCRIPTION("PMBus driver for Infineon XDPE122 family");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/xdpe152c4.c b/drivers/hwmon/pmbus/xdpe152c4.c
new file mode 100644
index 000000000..b8a36ef73
--- /dev/null
+++ b/drivers/hwmon/pmbus/xdpe152c4.c
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Hardware monitoring driver for Infineon Multi-phase Digital VR Controllers
+ *
+ * Copyright (c) 2022 Infineon Technologies. All rights reserved.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include "pmbus.h"
+
+#define XDPE152_PAGE_NUM 2
+
+static struct pmbus_driver_info xdpe152_info = {
+	.pages = XDPE152_PAGE_NUM,
+	.format[PSC_VOLTAGE_IN] = linear,
+	.format[PSC_VOLTAGE_OUT] = linear,
+	.format[PSC_TEMPERATURE] = linear,
+	.format[PSC_CURRENT_IN] = linear,
+	.format[PSC_CURRENT_OUT] = linear,
+	.format[PSC_POWER] = linear,
+	.func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+		PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+		PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_STATUS_TEMP |
+		PMBUS_HAVE_POUT | PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT,
+	.func[1] = PMBUS_HAVE_VIN | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT |
+		PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT |
+		PMBUS_HAVE_POUT | PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT,
+};
+
+static int xdpe152_probe(struct i2c_client *client)
+{
+	struct pmbus_driver_info *info;
+
+	info = devm_kmemdup(&client->dev, &xdpe152_info, sizeof(*info),
+			    GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	return pmbus_do_probe(client, info);
+}
+
+static const struct i2c_device_id xdpe152_id[] = {
+	{"xdpe152c4", 0},
+	{"xdpe15284", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, xdpe152_id);
+
+static const struct of_device_id __maybe_unused xdpe152_of_match[] = {
+	{.compatible = "infineon,xdpe152c4"},
+	{.compatible = "infineon,xdpe15284"},
+	{}
+};
+MODULE_DEVICE_TABLE(of, xdpe152_of_match);
+
+static struct i2c_driver xdpe152_driver = {
+	.driver = {
+		.name = "xdpe152c4",
+		.of_match_table = of_match_ptr(xdpe152_of_match),
+	},
+	.probe_new = xdpe152_probe,
+	.id_table = xdpe152_id,
+};
+
+module_i2c_driver(xdpe152_driver);
+
+MODULE_AUTHOR("Greg Schwendimann <greg.schwendimann@infineon.com>");
+MODULE_DESCRIPTION("PMBus driver for Infineon XDPE152 family");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);
diff --git a/drivers/hwmon/pmbus/zl6100.c b/drivers/hwmon/pmbus/zl6100.c
new file mode 100644
index 000000000..e9df0c56d
--- /dev/null
+++ b/drivers/hwmon/pmbus/zl6100.c
@@ -0,0 +1,473 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Hardware monitoring driver for ZL6100 and compatibles
+ *
+ * Copyright (c) 2011 Ericsson AB.
+ * Copyright (c) 2012 Guenter Roeck
+ */
+
+#include <linux/bitops.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/ktime.h>
+#include <linux/delay.h>
+#include "pmbus.h"
+
+enum chips { zl2004, zl2005, zl2006, zl2008, zl2105, zl2106, zl6100, zl6105,
+	     zl8802, zl9101, zl9117, zls1003, zls4009 };
+
+struct zl6100_data {
+	int id;
+	ktime_t access;		/* chip access time */
+	int delay;		/* Delay between chip accesses in uS */
+	struct pmbus_driver_info info;
+};
+
+#define to_zl6100_data(x)  container_of(x, struct zl6100_data, info)
+
+#define ZL6100_MFR_CONFIG		0xd0
+#define ZL6100_DEVICE_ID		0xe4
+
+#define ZL6100_MFR_XTEMP_ENABLE		BIT(7)
+
+#define ZL8802_MFR_USER_GLOBAL_CONFIG	0xe9
+#define ZL8802_MFR_TMON_ENABLE		BIT(12)
+#define ZL8802_MFR_USER_CONFIG		0xd1
+#define ZL8802_MFR_XTEMP_ENABLE_2	BIT(1)
+#define ZL8802_MFR_DDC_CONFIG		0xd3
+#define ZL8802_MFR_PHASES_MASK		0x0007
+
+#define MFR_VMON_OV_FAULT_LIMIT		0xf5
+#define MFR_VMON_UV_FAULT_LIMIT		0xf6
+#define MFR_READ_VMON			0xf7
+
+#define VMON_UV_WARNING			BIT(5)
+#define VMON_OV_WARNING			BIT(4)
+#define VMON_UV_FAULT			BIT(1)
+#define VMON_OV_FAULT			BIT(0)
+
+#define ZL6100_WAIT_TIME		1000	/* uS	*/
+
+static ushort delay = ZL6100_WAIT_TIME;
+module_param(delay, ushort, 0644);
+MODULE_PARM_DESC(delay, "Delay between chip accesses in uS");
+
+/* Convert linear sensor value to milli-units */
+static long zl6100_l2d(s16 l)
+{
+	s16 exponent;
+	s32 mantissa;
+	long val;
+
+	exponent = l >> 11;
+	mantissa = ((s16)((l & 0x7ff) << 5)) >> 5;
+
+	val = mantissa;
+
+	/* scale result to milli-units */
+	val = val * 1000L;
+
+	if (exponent >= 0)
+		val <<= exponent;
+	else
+		val >>= -exponent;
+
+	return val;
+}
+
+#define MAX_MANTISSA	(1023 * 1000)
+#define MIN_MANTISSA	(511 * 1000)
+
+static u16 zl6100_d2l(long val)
+{
+	s16 exponent = 0, mantissa;
+	bool negative = false;
+
+	/* simple case */
+	if (val == 0)
+		return 0;
+
+	if (val < 0) {
+		negative = true;
+		val = -val;
+	}
+
+	/* Reduce large mantissa until it fits into 10 bit */
+	while (val >= MAX_MANTISSA && exponent < 15) {
+		exponent++;
+		val >>= 1;
+	}
+	/* Increase small mantissa to improve precision */
+	while (val < MIN_MANTISSA && exponent > -15) {
+		exponent--;
+		val <<= 1;
+	}
+
+	/* Convert mantissa from milli-units to units */
+	mantissa = DIV_ROUND_CLOSEST(val, 1000);
+
+	/* Ensure that resulting number is within range */
+	if (mantissa > 0x3ff)
+		mantissa = 0x3ff;
+
+	/* restore sign */
+	if (negative)
+		mantissa = -mantissa;
+
+	/* Convert to 5 bit exponent, 11 bit mantissa */
+	return (mantissa & 0x7ff) | ((exponent << 11) & 0xf800);
+}
+
+/* Some chips need a delay between accesses */
+static inline void zl6100_wait(const struct zl6100_data *data)
+{
+	if (data->delay) {
+		s64 delta = ktime_us_delta(ktime_get(), data->access);
+		if (delta < data->delay)
+			udelay(data->delay - delta);
+	}
+}
+
+static int zl6100_read_word_data(struct i2c_client *client, int page,
+				 int phase, int reg)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	struct zl6100_data *data = to_zl6100_data(info);
+	int ret, vreg;
+
+	if (page >= info->pages)
+		return -ENXIO;
+
+	if (data->id == zl2005) {
+		/*
+		 * Limit register detection is not reliable on ZL2005.
+		 * Make sure registers are not erroneously detected.
+		 */
+		switch (reg) {
+		case PMBUS_VOUT_OV_WARN_LIMIT:
+		case PMBUS_VOUT_UV_WARN_LIMIT:
+		case PMBUS_IOUT_OC_WARN_LIMIT:
+			return -ENXIO;
+		}
+	}
+
+	switch (reg) {
+	case PMBUS_VIRT_READ_VMON:
+		vreg = MFR_READ_VMON;
+		break;
+	case PMBUS_VIRT_VMON_OV_WARN_LIMIT:
+	case PMBUS_VIRT_VMON_OV_FAULT_LIMIT:
+		vreg = MFR_VMON_OV_FAULT_LIMIT;
+		break;
+	case PMBUS_VIRT_VMON_UV_WARN_LIMIT:
+	case PMBUS_VIRT_VMON_UV_FAULT_LIMIT:
+		vreg = MFR_VMON_UV_FAULT_LIMIT;
+		break;
+	default:
+		if (reg >= PMBUS_VIRT_BASE)
+			return -ENXIO;
+		vreg = reg;
+		break;
+	}
+
+	zl6100_wait(data);
+	ret = pmbus_read_word_data(client, page, phase, vreg);
+	data->access = ktime_get();
+	if (ret < 0)
+		return ret;
+
+	switch (reg) {
+	case PMBUS_VIRT_VMON_OV_WARN_LIMIT:
+		ret = zl6100_d2l(DIV_ROUND_CLOSEST(zl6100_l2d(ret) * 9, 10));
+		break;
+	case PMBUS_VIRT_VMON_UV_WARN_LIMIT:
+		ret = zl6100_d2l(DIV_ROUND_CLOSEST(zl6100_l2d(ret) * 11, 10));
+		break;
+	}
+
+	return ret;
+}
+
+static int zl6100_read_byte_data(struct i2c_client *client, int page, int reg)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	struct zl6100_data *data = to_zl6100_data(info);
+	int ret, status;
+
+	if (page >= info->pages)
+		return -ENXIO;
+
+	zl6100_wait(data);
+
+	switch (reg) {
+	case PMBUS_VIRT_STATUS_VMON:
+		ret = pmbus_read_byte_data(client, 0,
+					   PMBUS_STATUS_MFR_SPECIFIC);
+		if (ret < 0)
+			break;
+
+		status = 0;
+		if (ret & VMON_UV_WARNING)
+			status |= PB_VOLTAGE_UV_WARNING;
+		if (ret & VMON_OV_WARNING)
+			status |= PB_VOLTAGE_OV_WARNING;
+		if (ret & VMON_UV_FAULT)
+			status |= PB_VOLTAGE_UV_FAULT;
+		if (ret & VMON_OV_FAULT)
+			status |= PB_VOLTAGE_OV_FAULT;
+		ret = status;
+		break;
+	default:
+		ret = pmbus_read_byte_data(client, page, reg);
+		break;
+	}
+	data->access = ktime_get();
+
+	return ret;
+}
+
+static int zl6100_write_word_data(struct i2c_client *client, int page, int reg,
+				  u16 word)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	struct zl6100_data *data = to_zl6100_data(info);
+	int ret, vreg;
+
+	if (page >= info->pages)
+		return -ENXIO;
+
+	switch (reg) {
+	case PMBUS_VIRT_VMON_OV_WARN_LIMIT:
+		word = zl6100_d2l(DIV_ROUND_CLOSEST(zl6100_l2d(word) * 10, 9));
+		vreg = MFR_VMON_OV_FAULT_LIMIT;
+		pmbus_clear_cache(client);
+		break;
+	case PMBUS_VIRT_VMON_OV_FAULT_LIMIT:
+		vreg = MFR_VMON_OV_FAULT_LIMIT;
+		pmbus_clear_cache(client);
+		break;
+	case PMBUS_VIRT_VMON_UV_WARN_LIMIT:
+		word = zl6100_d2l(DIV_ROUND_CLOSEST(zl6100_l2d(word) * 10, 11));
+		vreg = MFR_VMON_UV_FAULT_LIMIT;
+		pmbus_clear_cache(client);
+		break;
+	case PMBUS_VIRT_VMON_UV_FAULT_LIMIT:
+		vreg = MFR_VMON_UV_FAULT_LIMIT;
+		pmbus_clear_cache(client);
+		break;
+	default:
+		if (reg >= PMBUS_VIRT_BASE)
+			return -ENXIO;
+		vreg = reg;
+	}
+
+	zl6100_wait(data);
+	ret = pmbus_write_word_data(client, page, vreg, word);
+	data->access = ktime_get();
+
+	return ret;
+}
+
+static int zl6100_write_byte(struct i2c_client *client, int page, u8 value)
+{
+	const struct pmbus_driver_info *info = pmbus_get_driver_info(client);
+	struct zl6100_data *data = to_zl6100_data(info);
+	int ret;
+
+	if (page >= info->pages)
+		return -ENXIO;
+
+	zl6100_wait(data);
+	ret = pmbus_write_byte(client, page, value);
+	data->access = ktime_get();
+
+	return ret;
+}
+
+static const struct i2c_device_id zl6100_id[] = {
+	{"bmr450", zl2005},
+	{"bmr451", zl2005},
+	{"bmr462", zl2008},
+	{"bmr463", zl2008},
+	{"bmr464", zl2008},
+	{"bmr465", zls4009},
+	{"bmr466", zls1003},
+	{"bmr467", zls4009},
+	{"bmr469", zl8802},
+	{"zl2004", zl2004},
+	{"zl2005", zl2005},
+	{"zl2006", zl2006},
+	{"zl2008", zl2008},
+	{"zl2105", zl2105},
+	{"zl2106", zl2106},
+	{"zl6100", zl6100},
+	{"zl6105", zl6105},
+	{"zl8802", zl8802},
+	{"zl9101", zl9101},
+	{"zl9117", zl9117},
+	{"zls1003", zls1003},
+	{"zls4009", zls4009},
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, zl6100_id);
+
+static int zl6100_probe(struct i2c_client *client)
+{
+	int ret, i;
+	struct zl6100_data *data;
+	struct pmbus_driver_info *info;
+	u8 device_id[I2C_SMBUS_BLOCK_MAX + 1];
+	const struct i2c_device_id *mid;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_READ_WORD_DATA
+				     | I2C_FUNC_SMBUS_READ_BLOCK_DATA))
+		return -ENODEV;
+
+	ret = i2c_smbus_read_block_data(client, ZL6100_DEVICE_ID,
+					device_id);
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to read device ID\n");
+		return ret;
+	}
+	device_id[ret] = '\0';
+	dev_info(&client->dev, "Device ID %s\n", device_id);
+
+	mid = NULL;
+	for (mid = zl6100_id; mid->name[0]; mid++) {
+		if (!strncasecmp(mid->name, device_id, strlen(mid->name)))
+			break;
+	}
+	if (!mid->name[0]) {
+		dev_err(&client->dev, "Unsupported device\n");
+		return -ENODEV;
+	}
+	if (strcmp(client->name, mid->name) != 0)
+		dev_notice(&client->dev,
+			   "Device mismatch: Configured %s, detected %s\n",
+			   client->name, mid->name);
+
+	data = devm_kzalloc(&client->dev, sizeof(struct zl6100_data),
+			    GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->id = mid->driver_data;
+
+	/*
+	 * According to information from the chip vendor, all currently
+	 * supported chips are known to require a wait time between I2C
+	 * accesses.
+	 */
+	data->delay = delay;
+
+	/*
+	 * Since there was a direct I2C device access above, wait before
+	 * accessing the chip again.
+	 */
+	data->access = ktime_get();
+	zl6100_wait(data);
+
+	info = &data->info;
+
+	info->pages = 1;
+	info->func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT
+	  | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+	  | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT
+	  | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
+
+	/*
+	 * ZL2004, ZL8802, ZL9101M, ZL9117M and ZLS4009 support monitoring
+	 * an extra voltage (VMON for ZL2004, ZL8802 and ZLS4009,
+	 * VDRV for ZL9101M and ZL9117M). Report it as vmon.
+	 */
+	if (data->id == zl2004 || data->id == zl8802 || data->id == zl9101 ||
+	    data->id == zl9117 || data->id == zls4009)
+		info->func[0] |= PMBUS_HAVE_VMON | PMBUS_HAVE_STATUS_VMON;
+
+	/*
+	 * ZL8802 has two outputs that can be used either independently or in
+	 * a current sharing configuration. The driver uses the DDC_CONFIG
+	 * register to check if the module is running with independent or
+	 * shared outputs. If the module is in shared output mode, only one
+	 * output voltage will be reported.
+	 */
+	if (data->id == zl8802) {
+		info->pages = 2;
+		info->func[0] |= PMBUS_HAVE_IIN;
+
+		ret = i2c_smbus_read_word_data(client, ZL8802_MFR_DDC_CONFIG);
+		if (ret < 0)
+			return ret;
+
+		data->access = ktime_get();
+		zl6100_wait(data);
+
+		if (ret & ZL8802_MFR_PHASES_MASK)
+			info->func[1] |= PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT;
+		else
+			info->func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT
+				| PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT;
+
+		for (i = 0; i < 2; i++) {
+			ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, i);
+			if (ret < 0)
+				return ret;
+
+			data->access = ktime_get();
+			zl6100_wait(data);
+
+			ret = i2c_smbus_read_word_data(client, ZL8802_MFR_USER_CONFIG);
+			if (ret < 0)
+				return ret;
+
+			if (ret & ZL8802_MFR_XTEMP_ENABLE_2)
+				info->func[i] |= PMBUS_HAVE_TEMP2;
+
+			data->access = ktime_get();
+			zl6100_wait(data);
+		}
+		ret = i2c_smbus_read_word_data(client, ZL8802_MFR_USER_GLOBAL_CONFIG);
+		if (ret < 0)
+			return ret;
+
+		if (ret & ZL8802_MFR_TMON_ENABLE)
+			info->func[0] |= PMBUS_HAVE_TEMP3;
+	} else {
+		ret = i2c_smbus_read_word_data(client, ZL6100_MFR_CONFIG);
+		if (ret < 0)
+			return ret;
+
+		if (ret & ZL6100_MFR_XTEMP_ENABLE)
+			info->func[0] |= PMBUS_HAVE_TEMP2;
+	}
+
+	data->access = ktime_get();
+	zl6100_wait(data);
+
+	info->read_word_data = zl6100_read_word_data;
+	info->read_byte_data = zl6100_read_byte_data;
+	info->write_word_data = zl6100_write_word_data;
+	info->write_byte = zl6100_write_byte;
+
+	return pmbus_do_probe(client, info);
+}
+
+static struct i2c_driver zl6100_driver = {
+	.driver = {
+		   .name = "zl6100",
+		   },
+	.probe_new = zl6100_probe,
+	.id_table = zl6100_id,
+};
+
+module_i2c_driver(zl6100_driver);
+
+MODULE_AUTHOR("Guenter Roeck");
+MODULE_DESCRIPTION("PMBus driver for ZL6100 and compatibles");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(PMBUS);