Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 2001 insertions, 0 deletions

diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
new file mode 100644
index 000000000..aa469b33e
--- /dev/null
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -0,0 +1,2001 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * drivers/i2c/busses/i2c-tegra.c
+ *
+ * Copyright (C) 2010 Google, Inc.
+ * Author: Colin Cross <ccross@android.com>
+ */
+
+#include <linux/acpi.h>
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/ktime.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+
+#define BYTES_PER_FIFO_WORD 4
+
+#define I2C_CNFG				0x000
+#define I2C_CNFG_DEBOUNCE_CNT			GENMASK(14, 12)
+#define I2C_CNFG_PACKET_MODE_EN			BIT(10)
+#define I2C_CNFG_NEW_MASTER_FSM			BIT(11)
+#define I2C_CNFG_MULTI_MASTER_MODE		BIT(17)
+#define I2C_STATUS				0x01c
+#define I2C_SL_CNFG				0x020
+#define I2C_SL_CNFG_NACK			BIT(1)
+#define I2C_SL_CNFG_NEWSL			BIT(2)
+#define I2C_SL_ADDR1				0x02c
+#define I2C_SL_ADDR2				0x030
+#define I2C_TLOW_SEXT				0x034
+#define I2C_TX_FIFO				0x050
+#define I2C_RX_FIFO				0x054
+#define I2C_PACKET_TRANSFER_STATUS		0x058
+#define I2C_FIFO_CONTROL			0x05c
+#define I2C_FIFO_CONTROL_TX_FLUSH		BIT(1)
+#define I2C_FIFO_CONTROL_RX_FLUSH		BIT(0)
+#define I2C_FIFO_CONTROL_TX_TRIG(x)		(((x) - 1) << 5)
+#define I2C_FIFO_CONTROL_RX_TRIG(x)		(((x) - 1) << 2)
+#define I2C_FIFO_STATUS				0x060
+#define I2C_FIFO_STATUS_TX			GENMASK(7, 4)
+#define I2C_FIFO_STATUS_RX			GENMASK(3, 0)
+#define I2C_INT_MASK				0x064
+#define I2C_INT_STATUS				0x068
+#define I2C_INT_BUS_CLR_DONE			BIT(11)
+#define I2C_INT_PACKET_XFER_COMPLETE		BIT(7)
+#define I2C_INT_NO_ACK				BIT(3)
+#define I2C_INT_ARBITRATION_LOST		BIT(2)
+#define I2C_INT_TX_FIFO_DATA_REQ		BIT(1)
+#define I2C_INT_RX_FIFO_DATA_REQ		BIT(0)
+#define I2C_CLK_DIVISOR				0x06c
+#define I2C_CLK_DIVISOR_STD_FAST_MODE		GENMASK(31, 16)
+#define I2C_CLK_DIVISOR_HSMODE			GENMASK(15, 0)
+
+#define DVC_CTRL_REG1				0x000
+#define DVC_CTRL_REG1_INTR_EN			BIT(10)
+#define DVC_CTRL_REG3				0x008
+#define DVC_CTRL_REG3_SW_PROG			BIT(26)
+#define DVC_CTRL_REG3_I2C_DONE_INTR_EN		BIT(30)
+#define DVC_STATUS				0x00c
+#define DVC_STATUS_I2C_DONE_INTR		BIT(30)
+
+#define I2C_ERR_NONE				0x00
+#define I2C_ERR_NO_ACK				BIT(0)
+#define I2C_ERR_ARBITRATION_LOST		BIT(1)
+#define I2C_ERR_UNKNOWN_INTERRUPT		BIT(2)
+#define I2C_ERR_RX_BUFFER_OVERFLOW		BIT(3)
+
+#define PACKET_HEADER0_HEADER_SIZE		GENMASK(29, 28)
+#define PACKET_HEADER0_PACKET_ID		GENMASK(23, 16)
+#define PACKET_HEADER0_CONT_ID			GENMASK(15, 12)
+#define PACKET_HEADER0_PROTOCOL			GENMASK(7, 4)
+#define PACKET_HEADER0_PROTOCOL_I2C		1
+
+#define I2C_HEADER_CONT_ON_NAK			BIT(21)
+#define I2C_HEADER_READ				BIT(19)
+#define I2C_HEADER_10BIT_ADDR			BIT(18)
+#define I2C_HEADER_IE_ENABLE			BIT(17)
+#define I2C_HEADER_REPEAT_START			BIT(16)
+#define I2C_HEADER_CONTINUE_XFER		BIT(15)
+#define I2C_HEADER_SLAVE_ADDR_SHIFT		1
+
+#define I2C_BUS_CLEAR_CNFG			0x084
+#define I2C_BC_SCLK_THRESHOLD			GENMASK(23, 16)
+#define I2C_BC_STOP_COND			BIT(2)
+#define I2C_BC_TERMINATE			BIT(1)
+#define I2C_BC_ENABLE				BIT(0)
+#define I2C_BUS_CLEAR_STATUS			0x088
+#define I2C_BC_STATUS				BIT(0)
+
+#define I2C_CONFIG_LOAD				0x08c
+#define I2C_MSTR_CONFIG_LOAD			BIT(0)
+
+#define I2C_CLKEN_OVERRIDE			0x090
+#define I2C_MST_CORE_CLKEN_OVR			BIT(0)
+
+#define I2C_INTERFACE_TIMING_0			0x094
+#define  I2C_INTERFACE_TIMING_THIGH		GENMASK(13, 8)
+#define  I2C_INTERFACE_TIMING_TLOW		GENMASK(5, 0)
+#define I2C_INTERFACE_TIMING_1			0x098
+#define  I2C_INTERFACE_TIMING_TBUF		GENMASK(29, 24)
+#define  I2C_INTERFACE_TIMING_TSU_STO		GENMASK(21, 16)
+#define  I2C_INTERFACE_TIMING_THD_STA		GENMASK(13, 8)
+#define  I2C_INTERFACE_TIMING_TSU_STA		GENMASK(5, 0)
+
+#define I2C_HS_INTERFACE_TIMING_0		0x09c
+#define  I2C_HS_INTERFACE_TIMING_THIGH		GENMASK(13, 8)
+#define  I2C_HS_INTERFACE_TIMING_TLOW		GENMASK(5, 0)
+#define I2C_HS_INTERFACE_TIMING_1		0x0a0
+#define  I2C_HS_INTERFACE_TIMING_TSU_STO	GENMASK(21, 16)
+#define  I2C_HS_INTERFACE_TIMING_THD_STA	GENMASK(13, 8)
+#define  I2C_HS_INTERFACE_TIMING_TSU_STA	GENMASK(5, 0)
+
+#define I2C_MST_FIFO_CONTROL			0x0b4
+#define I2C_MST_FIFO_CONTROL_RX_FLUSH		BIT(0)
+#define I2C_MST_FIFO_CONTROL_TX_FLUSH		BIT(1)
+#define I2C_MST_FIFO_CONTROL_RX_TRIG(x)		(((x) - 1) <<  4)
+#define I2C_MST_FIFO_CONTROL_TX_TRIG(x)		(((x) - 1) << 16)
+
+#define I2C_MST_FIFO_STATUS			0x0b8
+#define I2C_MST_FIFO_STATUS_TX			GENMASK(23, 16)
+#define I2C_MST_FIFO_STATUS_RX			GENMASK(7, 0)
+
+/* configuration load timeout in microseconds */
+#define I2C_CONFIG_LOAD_TIMEOUT			1000000
+
+/* packet header size in bytes */
+#define I2C_PACKET_HEADER_SIZE			12
+
+/*
+ * I2C Controller will use PIO mode for transfers up to 32 bytes in order to
+ * avoid DMA overhead, otherwise external APB DMA controller will be used.
+ * Note that the actual MAX PIO length is 20 bytes because 32 bytes include
+ * I2C_PACKET_HEADER_SIZE.
+ */
+#define I2C_PIO_MODE_PREFERRED_LEN		32
+
+/*
+ * msg_end_type: The bus control which needs to be sent at end of transfer.
+ * @MSG_END_STOP: Send stop pulse.
+ * @MSG_END_REPEAT_START: Send repeat-start.
+ * @MSG_END_CONTINUE: Don't send stop or repeat-start.
+ */
+enum msg_end_type {
+	MSG_END_STOP,
+	MSG_END_REPEAT_START,
+	MSG_END_CONTINUE,
+};
+
+/**
+ * struct tegra_i2c_hw_feature : per hardware generation features
+ * @has_continue_xfer_support: continue-transfer supported
+ * @has_per_pkt_xfer_complete_irq: Has enable/disable capability for transfer
+ *		completion interrupt on per packet basis.
+ * @has_config_load_reg: Has the config load register to load the new
+ *		configuration.
+ * @clk_divisor_hs_mode: Clock divisor in HS mode.
+ * @clk_divisor_std_mode: Clock divisor in standard mode. It is
+ *		applicable if there is no fast clock source i.e. single clock
+ *		source.
+ * @clk_divisor_fast_mode: Clock divisor in fast mode. It is
+ *		applicable if there is no fast clock source i.e. single clock
+ *		source.
+ * @clk_divisor_fast_plus_mode: Clock divisor in fast mode plus. It is
+ *		applicable if there is no fast clock source (i.e. single
+ *		clock source).
+ * @has_multi_master_mode: The I2C controller supports running in single-master
+ *		or multi-master mode.
+ * @has_slcg_override_reg: The I2C controller supports a register that
+ *		overrides the second level clock gating.
+ * @has_mst_fifo: The I2C controller contains the new MST FIFO interface that
+ *		provides additional features and allows for longer messages to
+ *		be transferred in one go.
+ * @quirks: I2C adapter quirks for limiting write/read transfer size and not
+ *		allowing 0 length transfers.
+ * @supports_bus_clear: Bus Clear support to recover from bus hang during
+ *		SDA stuck low from device for some unknown reasons.
+ * @has_apb_dma: Support of APBDMA on corresponding Tegra chip.
+ * @tlow_std_mode: Low period of the clock in standard mode.
+ * @thigh_std_mode: High period of the clock in standard mode.
+ * @tlow_fast_fastplus_mode: Low period of the clock in fast/fast-plus modes.
+ * @thigh_fast_fastplus_mode: High period of the clock in fast/fast-plus modes.
+ * @setup_hold_time_std_mode: Setup and hold time for start and stop conditions
+ *		in standard mode.
+ * @setup_hold_time_fast_fast_plus_mode: Setup and hold time for start and stop
+ *		conditions in fast/fast-plus modes.
+ * @setup_hold_time_hs_mode: Setup and hold time for start and stop conditions
+ *		in HS mode.
+ * @has_interface_timing_reg: Has interface timing register to program the tuned
+ *		timing settings.
+ */
+struct tegra_i2c_hw_feature {
+	bool has_continue_xfer_support;
+	bool has_per_pkt_xfer_complete_irq;
+	bool has_config_load_reg;
+	u32 clk_divisor_hs_mode;
+	u32 clk_divisor_std_mode;
+	u32 clk_divisor_fast_mode;
+	u32 clk_divisor_fast_plus_mode;
+	bool has_multi_master_mode;
+	bool has_slcg_override_reg;
+	bool has_mst_fifo;
+	const struct i2c_adapter_quirks *quirks;
+	bool supports_bus_clear;
+	bool has_apb_dma;
+	u32 tlow_std_mode;
+	u32 thigh_std_mode;
+	u32 tlow_fast_fastplus_mode;
+	u32 thigh_fast_fastplus_mode;
+	u32 setup_hold_time_std_mode;
+	u32 setup_hold_time_fast_fast_plus_mode;
+	u32 setup_hold_time_hs_mode;
+	bool has_interface_timing_reg;
+};
+
+/**
+ * struct tegra_i2c_dev - per device I2C context
+ * @dev: device reference for power management
+ * @hw: Tegra I2C HW feature
+ * @adapter: core I2C layer adapter information
+ * @div_clk: clock reference for div clock of I2C controller
+ * @clocks: array of I2C controller clocks
+ * @nclocks: number of clocks in the array
+ * @rst: reset control for the I2C controller
+ * @base: ioremapped registers cookie
+ * @base_phys: physical base address of the I2C controller
+ * @cont_id: I2C controller ID, used for packet header
+ * @irq: IRQ number of transfer complete interrupt
+ * @is_dvc: identifies the DVC I2C controller, has a different register layout
+ * @is_vi: identifies the VI I2C controller, has a different register layout
+ * @msg_complete: transfer completion notifier
+ * @msg_buf_remaining: size of unsent data in the message buffer
+ * @msg_len: length of message in current transfer
+ * @msg_err: error code for completed message
+ * @msg_buf: pointer to current message data
+ * @msg_read: indicates that the transfer is a read access
+ * @timings: i2c timings information like bus frequency
+ * @multimaster_mode: indicates that I2C controller is in multi-master mode
+ * @tx_dma_chan: DMA transmit channel
+ * @rx_dma_chan: DMA receive channel
+ * @dma_phys: handle to DMA resources
+ * @dma_buf: pointer to allocated DMA buffer
+ * @dma_buf_size: DMA buffer size
+ * @dma_mode: indicates active DMA transfer
+ * @dma_complete: DMA completion notifier
+ * @atomic_mode: indicates active atomic transfer
+ */
+struct tegra_i2c_dev {
+	struct device *dev;
+	struct i2c_adapter adapter;
+
+	const struct tegra_i2c_hw_feature *hw;
+	struct reset_control *rst;
+	unsigned int cont_id;
+	unsigned int irq;
+
+	phys_addr_t base_phys;
+	void __iomem *base;
+
+	struct clk_bulk_data clocks[2];
+	unsigned int nclocks;
+
+	struct clk *div_clk;
+	struct i2c_timings timings;
+
+	struct completion msg_complete;
+	size_t msg_buf_remaining;
+	unsigned int msg_len;
+	int msg_err;
+	u8 *msg_buf;
+
+	struct completion dma_complete;
+	struct dma_chan *tx_dma_chan;
+	struct dma_chan *rx_dma_chan;
+	unsigned int dma_buf_size;
+	struct device *dma_dev;
+	dma_addr_t dma_phys;
+	void *dma_buf;
+
+	bool multimaster_mode;
+	bool atomic_mode;
+	bool dma_mode;
+	bool msg_read;
+	bool is_dvc;
+	bool is_vi;
+};
+
+static void dvc_writel(struct tegra_i2c_dev *i2c_dev, u32 val,
+		       unsigned int reg)
+{
+	writel_relaxed(val, i2c_dev->base + reg);
+}
+
+static u32 dvc_readl(struct tegra_i2c_dev *i2c_dev, unsigned int reg)
+{
+	return readl_relaxed(i2c_dev->base + reg);
+}
+
+/*
+ * If necessary, i2c_writel() and i2c_readl() will offset the register
+ * in order to talk to the I2C block inside the DVC block.
+ */
+static u32 tegra_i2c_reg_addr(struct tegra_i2c_dev *i2c_dev, unsigned int reg)
+{
+	if (i2c_dev->is_dvc)
+		reg += (reg >= I2C_TX_FIFO) ? 0x10 : 0x40;
+	else if (i2c_dev->is_vi)
+		reg = 0xc00 + (reg << 2);
+
+	return reg;
+}
+
+static void i2c_writel(struct tegra_i2c_dev *i2c_dev, u32 val, unsigned int reg)
+{
+	writel_relaxed(val, i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg));
+
+	/* read back register to make sure that register writes completed */
+	if (reg != I2C_TX_FIFO)
+		readl_relaxed(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg));
+	else if (i2c_dev->is_vi)
+		readl_relaxed(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, I2C_INT_STATUS));
+}
+
+static u32 i2c_readl(struct tegra_i2c_dev *i2c_dev, unsigned int reg)
+{
+	return readl_relaxed(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg));
+}
+
+static void i2c_writesl(struct tegra_i2c_dev *i2c_dev, void *data,
+			unsigned int reg, unsigned int len)
+{
+	writesl(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg), data, len);
+}
+
+static void i2c_writesl_vi(struct tegra_i2c_dev *i2c_dev, void *data,
+			   unsigned int reg, unsigned int len)
+{
+	u32 *data32 = data;
+
+	/*
+	 * VI I2C controller has known hardware bug where writes get stuck
+	 * when immediate multiple writes happen to TX_FIFO register.
+	 * Recommended software work around is to read I2C register after
+	 * each write to TX_FIFO register to flush out the data.
+	 */
+	while (len--)
+		i2c_writel(i2c_dev, *data32++, reg);
+}
+
+static void i2c_readsl(struct tegra_i2c_dev *i2c_dev, void *data,
+		       unsigned int reg, unsigned int len)
+{
+	readsl(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg), data, len);
+}
+
+static void tegra_i2c_mask_irq(struct tegra_i2c_dev *i2c_dev, u32 mask)
+{
+	u32 int_mask;
+
+	int_mask = i2c_readl(i2c_dev, I2C_INT_MASK) & ~mask;
+	i2c_writel(i2c_dev, int_mask, I2C_INT_MASK);
+}
+
+static void tegra_i2c_unmask_irq(struct tegra_i2c_dev *i2c_dev, u32 mask)
+{
+	u32 int_mask;
+
+	int_mask = i2c_readl(i2c_dev, I2C_INT_MASK) | mask;
+	i2c_writel(i2c_dev, int_mask, I2C_INT_MASK);
+}
+
+static void tegra_i2c_dma_complete(void *args)
+{
+	struct tegra_i2c_dev *i2c_dev = args;
+
+	complete(&i2c_dev->dma_complete);
+}
+
+static int tegra_i2c_dma_submit(struct tegra_i2c_dev *i2c_dev, size_t len)
+{
+	struct dma_async_tx_descriptor *dma_desc;
+	enum dma_transfer_direction dir;
+	struct dma_chan *chan;
+
+	dev_dbg(i2c_dev->dev, "starting DMA for length: %zu\n", len);
+
+	reinit_completion(&i2c_dev->dma_complete);
+
+	dir = i2c_dev->msg_read ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV;
+	chan = i2c_dev->msg_read ? i2c_dev->rx_dma_chan : i2c_dev->tx_dma_chan;
+
+	dma_desc = dmaengine_prep_slave_single(chan, i2c_dev->dma_phys,
+					       len, dir, DMA_PREP_INTERRUPT |
+					       DMA_CTRL_ACK);
+	if (!dma_desc) {
+		dev_err(i2c_dev->dev, "failed to get %s DMA descriptor\n",
+			i2c_dev->msg_read ? "RX" : "TX");
+		return -EINVAL;
+	}
+
+	dma_desc->callback = tegra_i2c_dma_complete;
+	dma_desc->callback_param = i2c_dev;
+
+	dmaengine_submit(dma_desc);
+	dma_async_issue_pending(chan);
+
+	return 0;
+}
+
+static void tegra_i2c_release_dma(struct tegra_i2c_dev *i2c_dev)
+{
+	if (i2c_dev->dma_buf) {
+		dma_free_coherent(i2c_dev->dma_dev, i2c_dev->dma_buf_size,
+				  i2c_dev->dma_buf, i2c_dev->dma_phys);
+		i2c_dev->dma_buf = NULL;
+	}
+
+	if (i2c_dev->tx_dma_chan) {
+		dma_release_channel(i2c_dev->tx_dma_chan);
+		i2c_dev->tx_dma_chan = NULL;
+	}
+
+	if (i2c_dev->rx_dma_chan) {
+		dma_release_channel(i2c_dev->rx_dma_chan);
+		i2c_dev->rx_dma_chan = NULL;
+	}
+}
+
+static int tegra_i2c_init_dma(struct tegra_i2c_dev *i2c_dev)
+{
+	struct dma_chan *chan;
+	dma_addr_t dma_phys;
+	u32 *dma_buf;
+	int err;
+
+	if (i2c_dev->is_vi)
+		return 0;
+
+	if (i2c_dev->hw->has_apb_dma) {
+		if (!IS_ENABLED(CONFIG_TEGRA20_APB_DMA)) {
+			dev_dbg(i2c_dev->dev, "APB DMA support not enabled\n");
+			return 0;
+		}
+	} else if (!IS_ENABLED(CONFIG_TEGRA186_GPC_DMA)) {
+		dev_dbg(i2c_dev->dev, "GPC DMA support not enabled\n");
+		return 0;
+	}
+
+	chan = dma_request_chan(i2c_dev->dev, "rx");
+	if (IS_ERR(chan)) {
+		err = PTR_ERR(chan);
+		goto err_out;
+	}
+
+	i2c_dev->rx_dma_chan = chan;
+
+	chan = dma_request_chan(i2c_dev->dev, "tx");
+	if (IS_ERR(chan)) {
+		err = PTR_ERR(chan);
+		goto err_out;
+	}
+
+	i2c_dev->tx_dma_chan = chan;
+
+	WARN_ON(i2c_dev->tx_dma_chan->device != i2c_dev->rx_dma_chan->device);
+	i2c_dev->dma_dev = chan->device->dev;
+
+	i2c_dev->dma_buf_size = i2c_dev->hw->quirks->max_write_len +
+				I2C_PACKET_HEADER_SIZE;
+
+	dma_buf = dma_alloc_coherent(i2c_dev->dma_dev, i2c_dev->dma_buf_size,
+				     &dma_phys, GFP_KERNEL | __GFP_NOWARN);
+	if (!dma_buf) {
+		dev_err(i2c_dev->dev, "failed to allocate DMA buffer\n");
+		err = -ENOMEM;
+		goto err_out;
+	}
+
+	i2c_dev->dma_buf = dma_buf;
+	i2c_dev->dma_phys = dma_phys;
+
+	return 0;
+
+err_out:
+	tegra_i2c_release_dma(i2c_dev);
+	if (err != -EPROBE_DEFER) {
+		dev_err(i2c_dev->dev, "cannot use DMA: %d\n", err);
+		dev_err(i2c_dev->dev, "falling back to PIO\n");
+		return 0;
+	}
+
+	return err;
+}
+
+/*
+ * One of the Tegra I2C blocks is inside the DVC (Digital Voltage Controller)
+ * block.  This block is identical to the rest of the I2C blocks, except that
+ * it only supports master mode, it has registers moved around, and it needs
+ * some extra init to get it into I2C mode.  The register moves are handled
+ * by i2c_readl() and i2c_writel().
+ */
+static void tegra_dvc_init(struct tegra_i2c_dev *i2c_dev)
+{
+	u32 val;
+
+	val = dvc_readl(i2c_dev, DVC_CTRL_REG3);
+	val |= DVC_CTRL_REG3_SW_PROG;
+	val |= DVC_CTRL_REG3_I2C_DONE_INTR_EN;
+	dvc_writel(i2c_dev, val, DVC_CTRL_REG3);
+
+	val = dvc_readl(i2c_dev, DVC_CTRL_REG1);
+	val |= DVC_CTRL_REG1_INTR_EN;
+	dvc_writel(i2c_dev, val, DVC_CTRL_REG1);
+}
+
+static void tegra_i2c_vi_init(struct tegra_i2c_dev *i2c_dev)
+{
+	u32 value;
+
+	value = FIELD_PREP(I2C_INTERFACE_TIMING_THIGH, 2) |
+		FIELD_PREP(I2C_INTERFACE_TIMING_TLOW, 4);
+	i2c_writel(i2c_dev, value, I2C_INTERFACE_TIMING_0);
+
+	value = FIELD_PREP(I2C_INTERFACE_TIMING_TBUF, 4) |
+		FIELD_PREP(I2C_INTERFACE_TIMING_TSU_STO, 7) |
+		FIELD_PREP(I2C_INTERFACE_TIMING_THD_STA, 4) |
+		FIELD_PREP(I2C_INTERFACE_TIMING_TSU_STA, 4);
+	i2c_writel(i2c_dev, value, I2C_INTERFACE_TIMING_1);
+
+	value = FIELD_PREP(I2C_HS_INTERFACE_TIMING_THIGH, 3) |
+		FIELD_PREP(I2C_HS_INTERFACE_TIMING_TLOW, 8);
+	i2c_writel(i2c_dev, value, I2C_HS_INTERFACE_TIMING_0);
+
+	value = FIELD_PREP(I2C_HS_INTERFACE_TIMING_TSU_STO, 11) |
+		FIELD_PREP(I2C_HS_INTERFACE_TIMING_THD_STA, 11) |
+		FIELD_PREP(I2C_HS_INTERFACE_TIMING_TSU_STA, 11);
+	i2c_writel(i2c_dev, value, I2C_HS_INTERFACE_TIMING_1);
+
+	value = FIELD_PREP(I2C_BC_SCLK_THRESHOLD, 9) | I2C_BC_STOP_COND;
+	i2c_writel(i2c_dev, value, I2C_BUS_CLEAR_CNFG);
+
+	i2c_writel(i2c_dev, 0x0, I2C_TLOW_SEXT);
+}
+
+static int tegra_i2c_poll_register(struct tegra_i2c_dev *i2c_dev,
+				   u32 reg, u32 mask, u32 delay_us,
+				   u32 timeout_us)
+{
+	void __iomem *addr = i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg);
+	u32 val;
+
+	if (!i2c_dev->atomic_mode)
+		return readl_relaxed_poll_timeout(addr, val, !(val & mask),
+						  delay_us, timeout_us);
+
+	return readl_relaxed_poll_timeout_atomic(addr, val, !(val & mask),
+						 delay_us, timeout_us);
+}
+
+static int tegra_i2c_flush_fifos(struct tegra_i2c_dev *i2c_dev)
+{
+	u32 mask, val, offset;
+	int err;
+
+	if (i2c_dev->hw->has_mst_fifo) {
+		mask = I2C_MST_FIFO_CONTROL_TX_FLUSH |
+		       I2C_MST_FIFO_CONTROL_RX_FLUSH;
+		offset = I2C_MST_FIFO_CONTROL;
+	} else {
+		mask = I2C_FIFO_CONTROL_TX_FLUSH |
+		       I2C_FIFO_CONTROL_RX_FLUSH;
+		offset = I2C_FIFO_CONTROL;
+	}
+
+	val = i2c_readl(i2c_dev, offset);
+	val |= mask;
+	i2c_writel(i2c_dev, val, offset);
+
+	err = tegra_i2c_poll_register(i2c_dev, offset, mask, 1000, 1000000);
+	if (err) {
+		dev_err(i2c_dev->dev, "failed to flush FIFO\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static int tegra_i2c_wait_for_config_load(struct tegra_i2c_dev *i2c_dev)
+{
+	int err;
+
+	if (!i2c_dev->hw->has_config_load_reg)
+		return 0;
+
+	i2c_writel(i2c_dev, I2C_MSTR_CONFIG_LOAD, I2C_CONFIG_LOAD);
+
+	err = tegra_i2c_poll_register(i2c_dev, I2C_CONFIG_LOAD, 0xffffffff,
+				      1000, I2C_CONFIG_LOAD_TIMEOUT);
+	if (err) {
+		dev_err(i2c_dev->dev, "failed to load config\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
+{
+	u32 val, clk_divisor, clk_multiplier, tsu_thd, tlow, thigh, non_hs_mode;
+	acpi_handle handle = ACPI_HANDLE(i2c_dev->dev);
+	struct i2c_timings *t = &i2c_dev->timings;
+	int err;
+
+	/*
+	 * The reset shouldn't ever fail in practice. The failure will be a
+	 * sign of a severe problem that needs to be resolved. Still we don't
+	 * want to fail the initialization completely because this may break
+	 * kernel boot up since voltage regulators use I2C. Hence, we will
+	 * emit a noisy warning on error, which won't stay unnoticed and
+	 * won't hose machine entirely.
+	 */
+	if (handle)
+		err = acpi_evaluate_object(handle, "_RST", NULL, NULL);
+	else
+		err = reset_control_reset(i2c_dev->rst);
+
+	WARN_ON_ONCE(err);
+
+	if (i2c_dev->is_dvc)
+		tegra_dvc_init(i2c_dev);
+
+	val = I2C_CNFG_NEW_MASTER_FSM | I2C_CNFG_PACKET_MODE_EN |
+	      FIELD_PREP(I2C_CNFG_DEBOUNCE_CNT, 2);
+
+	if (i2c_dev->hw->has_multi_master_mode)
+		val |= I2C_CNFG_MULTI_MASTER_MODE;
+
+	i2c_writel(i2c_dev, val, I2C_CNFG);
+	i2c_writel(i2c_dev, 0, I2C_INT_MASK);
+
+	if (i2c_dev->is_vi)
+		tegra_i2c_vi_init(i2c_dev);
+
+	switch (t->bus_freq_hz) {
+	case I2C_MAX_STANDARD_MODE_FREQ + 1 ... I2C_MAX_FAST_MODE_PLUS_FREQ:
+	default:
+		tlow = i2c_dev->hw->tlow_fast_fastplus_mode;
+		thigh = i2c_dev->hw->thigh_fast_fastplus_mode;
+		tsu_thd = i2c_dev->hw->setup_hold_time_fast_fast_plus_mode;
+
+		if (t->bus_freq_hz > I2C_MAX_FAST_MODE_FREQ)
+			non_hs_mode = i2c_dev->hw->clk_divisor_fast_plus_mode;
+		else
+			non_hs_mode = i2c_dev->hw->clk_divisor_fast_mode;
+		break;
+
+	case 0 ... I2C_MAX_STANDARD_MODE_FREQ:
+		tlow = i2c_dev->hw->tlow_std_mode;
+		thigh = i2c_dev->hw->thigh_std_mode;
+		tsu_thd = i2c_dev->hw->setup_hold_time_std_mode;
+		non_hs_mode = i2c_dev->hw->clk_divisor_std_mode;
+		break;
+	}
+
+	/* make sure clock divisor programmed correctly */
+	clk_divisor = FIELD_PREP(I2C_CLK_DIVISOR_HSMODE,
+				 i2c_dev->hw->clk_divisor_hs_mode) |
+		      FIELD_PREP(I2C_CLK_DIVISOR_STD_FAST_MODE, non_hs_mode);
+	i2c_writel(i2c_dev, clk_divisor, I2C_CLK_DIVISOR);
+
+	if (i2c_dev->hw->has_interface_timing_reg) {
+		val = FIELD_PREP(I2C_INTERFACE_TIMING_THIGH, thigh) |
+		      FIELD_PREP(I2C_INTERFACE_TIMING_TLOW, tlow);
+		i2c_writel(i2c_dev, val, I2C_INTERFACE_TIMING_0);
+	}
+
+	/*
+	 * Configure setup and hold times only when tsu_thd is non-zero.
+	 * Otherwise, preserve the chip default values.
+	 */
+	if (i2c_dev->hw->has_interface_timing_reg && tsu_thd)
+		i2c_writel(i2c_dev, tsu_thd, I2C_INTERFACE_TIMING_1);
+
+	clk_multiplier = (tlow + thigh + 2) * (non_hs_mode + 1);
+
+	err = clk_set_rate(i2c_dev->div_clk,
+			   t->bus_freq_hz * clk_multiplier);
+	if (err) {
+		dev_err(i2c_dev->dev, "failed to set div-clk rate: %d\n", err);
+		return err;
+	}
+
+	if (!i2c_dev->is_dvc && !i2c_dev->is_vi) {
+		u32 sl_cfg = i2c_readl(i2c_dev, I2C_SL_CNFG);
+
+		sl_cfg |= I2C_SL_CNFG_NACK | I2C_SL_CNFG_NEWSL;
+		i2c_writel(i2c_dev, sl_cfg, I2C_SL_CNFG);
+		i2c_writel(i2c_dev, 0xfc, I2C_SL_ADDR1);
+		i2c_writel(i2c_dev, 0x00, I2C_SL_ADDR2);
+	}
+
+	err = tegra_i2c_flush_fifos(i2c_dev);
+	if (err)
+		return err;
+
+	if (i2c_dev->multimaster_mode && i2c_dev->hw->has_slcg_override_reg)
+		i2c_writel(i2c_dev, I2C_MST_CORE_CLKEN_OVR, I2C_CLKEN_OVERRIDE);
+
+	err = tegra_i2c_wait_for_config_load(i2c_dev);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static int tegra_i2c_disable_packet_mode(struct tegra_i2c_dev *i2c_dev)
+{
+	u32 cnfg;
+
+	/*
+	 * NACK interrupt is generated before the I2C controller generates
+	 * the STOP condition on the bus.  So, wait for 2 clock periods
+	 * before disabling the controller so that the STOP condition has
+	 * been delivered properly.
+	 */
+	udelay(DIV_ROUND_UP(2 * 1000000, i2c_dev->timings.bus_freq_hz));
+
+	cnfg = i2c_readl(i2c_dev, I2C_CNFG);
+	if (cnfg & I2C_CNFG_PACKET_MODE_EN)
+		i2c_writel(i2c_dev, cnfg & ~I2C_CNFG_PACKET_MODE_EN, I2C_CNFG);
+
+	return tegra_i2c_wait_for_config_load(i2c_dev);
+}
+
+static int tegra_i2c_empty_rx_fifo(struct tegra_i2c_dev *i2c_dev)
+{
+	size_t buf_remaining = i2c_dev->msg_buf_remaining;
+	unsigned int words_to_transfer, rx_fifo_avail;
+	u8 *buf = i2c_dev->msg_buf;
+	u32 val;
+
+	/*
+	 * Catch overflow due to message fully sent before the check for
+	 * RX FIFO availability.
+	 */
+	if (WARN_ON_ONCE(!(i2c_dev->msg_buf_remaining)))
+		return -EINVAL;
+
+	if (i2c_dev->hw->has_mst_fifo) {
+		val = i2c_readl(i2c_dev, I2C_MST_FIFO_STATUS);
+		rx_fifo_avail = FIELD_GET(I2C_MST_FIFO_STATUS_RX, val);
+	} else {
+		val = i2c_readl(i2c_dev, I2C_FIFO_STATUS);
+		rx_fifo_avail = FIELD_GET(I2C_FIFO_STATUS_RX, val);
+	}
+
+	/* round down to exclude partial word at the end of buffer */
+	words_to_transfer = buf_remaining / BYTES_PER_FIFO_WORD;
+	if (words_to_transfer > rx_fifo_avail)
+		words_to_transfer = rx_fifo_avail;
+
+	i2c_readsl(i2c_dev, buf, I2C_RX_FIFO, words_to_transfer);
+
+	buf += words_to_transfer * BYTES_PER_FIFO_WORD;
+	buf_remaining -= words_to_transfer * BYTES_PER_FIFO_WORD;
+	rx_fifo_avail -= words_to_transfer;
+
+	/*
+	 * If there is a partial word at the end of buffer, handle it
+	 * manually to prevent overwriting past the end of buffer.
+	 */
+	if (rx_fifo_avail > 0 && buf_remaining > 0) {
+		/*
+		 * buf_remaining > 3 check not needed as rx_fifo_avail == 0
+		 * when (words_to_transfer was > rx_fifo_avail) earlier
+		 * in this function.
+		 */
+		val = i2c_readl(i2c_dev, I2C_RX_FIFO);
+		val = cpu_to_le32(val);
+		memcpy(buf, &val, buf_remaining);
+		buf_remaining = 0;
+		rx_fifo_avail--;
+	}
+
+	/* RX FIFO must be drained, otherwise it's an Overflow case. */
+	if (WARN_ON_ONCE(rx_fifo_avail))
+		return -EINVAL;
+
+	i2c_dev->msg_buf_remaining = buf_remaining;
+	i2c_dev->msg_buf = buf;
+
+	return 0;
+}
+
+static int tegra_i2c_fill_tx_fifo(struct tegra_i2c_dev *i2c_dev)
+{
+	size_t buf_remaining = i2c_dev->msg_buf_remaining;
+	unsigned int words_to_transfer, tx_fifo_avail;
+	u8 *buf = i2c_dev->msg_buf;
+	u32 val;
+
+	if (i2c_dev->hw->has_mst_fifo) {
+		val = i2c_readl(i2c_dev, I2C_MST_FIFO_STATUS);
+		tx_fifo_avail = FIELD_GET(I2C_MST_FIFO_STATUS_TX, val);
+	} else {
+		val = i2c_readl(i2c_dev, I2C_FIFO_STATUS);
+		tx_fifo_avail = FIELD_GET(I2C_FIFO_STATUS_TX, val);
+	}
+
+	/* round down to exclude partial word at the end of buffer */
+	words_to_transfer = buf_remaining / BYTES_PER_FIFO_WORD;
+
+	/*
+	 * This hunk pushes 4 bytes at a time into the TX FIFO.
+	 *
+	 * It's very common to have < 4 bytes, hence there is no word
+	 * to push if we have less than 4 bytes to transfer.
+	 */
+	if (words_to_transfer) {
+		if (words_to_transfer > tx_fifo_avail)
+			words_to_transfer = tx_fifo_avail;
+
+		/*
+		 * Update state before writing to FIFO.  Note that this may
+		 * cause us to finish writing all bytes (AKA buf_remaining
+		 * goes to 0), hence we have a potential for an interrupt
+		 * (PACKET_XFER_COMPLETE is not maskable), but GIC interrupt
+		 * is disabled at this point.
+		 */
+		buf_remaining -= words_to_transfer * BYTES_PER_FIFO_WORD;
+		tx_fifo_avail -= words_to_transfer;
+
+		i2c_dev->msg_buf_remaining = buf_remaining;
+		i2c_dev->msg_buf = buf + words_to_transfer * BYTES_PER_FIFO_WORD;
+
+		if (i2c_dev->is_vi)
+			i2c_writesl_vi(i2c_dev, buf, I2C_TX_FIFO, words_to_transfer);
+		else
+			i2c_writesl(i2c_dev, buf, I2C_TX_FIFO, words_to_transfer);
+
+		buf += words_to_transfer * BYTES_PER_FIFO_WORD;
+	}
+
+	/*
+	 * If there is a partial word at the end of buffer, handle it manually
+	 * to prevent reading past the end of buffer, which could cross a page
+	 * boundary and fault.
+	 */
+	if (tx_fifo_avail > 0 && buf_remaining > 0) {
+		/*
+		 * buf_remaining > 3 check not needed as tx_fifo_avail == 0
+		 * when (words_to_transfer was > tx_fifo_avail) earlier
+		 * in this function for non-zero words_to_transfer.
+		 */
+		memcpy(&val, buf, buf_remaining);
+		val = le32_to_cpu(val);
+
+		i2c_dev->msg_buf_remaining = 0;
+		i2c_dev->msg_buf = NULL;
+
+		i2c_writel(i2c_dev, val, I2C_TX_FIFO);
+	}
+
+	return 0;
+}
+
+static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
+{
+	const u32 status_err = I2C_INT_NO_ACK | I2C_INT_ARBITRATION_LOST;
+	struct tegra_i2c_dev *i2c_dev = dev_id;
+	u32 status;
+
+	status = i2c_readl(i2c_dev, I2C_INT_STATUS);
+
+	if (status == 0) {
+		dev_warn(i2c_dev->dev, "IRQ status 0 %08x %08x %08x\n",
+			 i2c_readl(i2c_dev, I2C_PACKET_TRANSFER_STATUS),
+			 i2c_readl(i2c_dev, I2C_STATUS),
+			 i2c_readl(i2c_dev, I2C_CNFG));
+		i2c_dev->msg_err |= I2C_ERR_UNKNOWN_INTERRUPT;
+		goto err;
+	}
+
+	if (status & status_err) {
+		tegra_i2c_disable_packet_mode(i2c_dev);
+		if (status & I2C_INT_NO_ACK)
+			i2c_dev->msg_err |= I2C_ERR_NO_ACK;
+		if (status & I2C_INT_ARBITRATION_LOST)
+			i2c_dev->msg_err |= I2C_ERR_ARBITRATION_LOST;
+		goto err;
+	}
+
+	/*
+	 * I2C transfer is terminated during the bus clear, so skip
+	 * processing the other interrupts.
+	 */
+	if (i2c_dev->hw->supports_bus_clear && (status & I2C_INT_BUS_CLR_DONE))
+		goto err;
+
+	if (!i2c_dev->dma_mode) {
+		if (i2c_dev->msg_read && (status & I2C_INT_RX_FIFO_DATA_REQ)) {
+			if (tegra_i2c_empty_rx_fifo(i2c_dev)) {
+				/*
+				 * Overflow error condition: message fully sent,
+				 * with no XFER_COMPLETE interrupt but hardware
+				 * asks to transfer more.
+				 */
+				i2c_dev->msg_err |= I2C_ERR_RX_BUFFER_OVERFLOW;
+				goto err;
+			}
+		}
+
+		if (!i2c_dev->msg_read && (status & I2C_INT_TX_FIFO_DATA_REQ)) {
+			if (i2c_dev->msg_buf_remaining)
+				tegra_i2c_fill_tx_fifo(i2c_dev);
+			else
+				tegra_i2c_mask_irq(i2c_dev,
+						   I2C_INT_TX_FIFO_DATA_REQ);
+		}
+	}
+
+	i2c_writel(i2c_dev, status, I2C_INT_STATUS);
+	if (i2c_dev->is_dvc)
+		dvc_writel(i2c_dev, DVC_STATUS_I2C_DONE_INTR, DVC_STATUS);
+
+	/*
+	 * During message read XFER_COMPLETE interrupt is triggered prior to
+	 * DMA completion and during message write XFER_COMPLETE interrupt is
+	 * triggered after DMA completion.
+	 *
+	 * PACKETS_XFER_COMPLETE indicates completion of all bytes of transfer,
+	 * so forcing msg_buf_remaining to 0 in DMA mode.
+	 */
+	if (status & I2C_INT_PACKET_XFER_COMPLETE) {
+		if (i2c_dev->dma_mode)
+			i2c_dev->msg_buf_remaining = 0;
+		/*
+		 * Underflow error condition: XFER_COMPLETE before message
+		 * fully sent.
+		 */
+		if (WARN_ON_ONCE(i2c_dev->msg_buf_remaining)) {
+			i2c_dev->msg_err |= I2C_ERR_UNKNOWN_INTERRUPT;
+			goto err;
+		}
+		complete(&i2c_dev->msg_complete);
+	}
+	goto done;
+err:
+	/* mask all interrupts on error */
+	tegra_i2c_mask_irq(i2c_dev,
+			   I2C_INT_NO_ACK |
+			   I2C_INT_ARBITRATION_LOST |
+			   I2C_INT_PACKET_XFER_COMPLETE |
+			   I2C_INT_TX_FIFO_DATA_REQ |
+			   I2C_INT_RX_FIFO_DATA_REQ);
+
+	if (i2c_dev->hw->supports_bus_clear)
+		tegra_i2c_mask_irq(i2c_dev, I2C_INT_BUS_CLR_DONE);
+
+	i2c_writel(i2c_dev, status, I2C_INT_STATUS);
+
+	if (i2c_dev->is_dvc)
+		dvc_writel(i2c_dev, DVC_STATUS_I2C_DONE_INTR, DVC_STATUS);
+
+	if (i2c_dev->dma_mode) {
+		if (i2c_dev->msg_read)
+			dmaengine_terminate_async(i2c_dev->rx_dma_chan);
+		else
+			dmaengine_terminate_async(i2c_dev->tx_dma_chan);
+
+		complete(&i2c_dev->dma_complete);
+	}
+
+	complete(&i2c_dev->msg_complete);
+done:
+	return IRQ_HANDLED;
+}
+
+static void tegra_i2c_config_fifo_trig(struct tegra_i2c_dev *i2c_dev,
+				       size_t len)
+{
+	struct dma_slave_config slv_config = {0};
+	u32 val, reg, dma_burst, reg_offset;
+	struct dma_chan *chan;
+	int err;
+
+	if (i2c_dev->hw->has_mst_fifo)
+		reg = I2C_MST_FIFO_CONTROL;
+	else
+		reg = I2C_FIFO_CONTROL;
+
+	if (i2c_dev->dma_mode) {
+		if (len & 0xF)
+			dma_burst = 1;
+		else if (len & 0x10)
+			dma_burst = 4;
+		else
+			dma_burst = 8;
+
+		if (i2c_dev->msg_read) {
+			chan = i2c_dev->rx_dma_chan;
+			reg_offset = tegra_i2c_reg_addr(i2c_dev, I2C_RX_FIFO);
+
+			slv_config.src_addr = i2c_dev->base_phys + reg_offset;
+			slv_config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+			slv_config.src_maxburst = dma_burst;
+
+			if (i2c_dev->hw->has_mst_fifo)
+				val = I2C_MST_FIFO_CONTROL_RX_TRIG(dma_burst);
+			else
+				val = I2C_FIFO_CONTROL_RX_TRIG(dma_burst);
+		} else {
+			chan = i2c_dev->tx_dma_chan;
+			reg_offset = tegra_i2c_reg_addr(i2c_dev, I2C_TX_FIFO);
+
+			slv_config.dst_addr = i2c_dev->base_phys + reg_offset;
+			slv_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+			slv_config.dst_maxburst = dma_burst;
+
+			if (i2c_dev->hw->has_mst_fifo)
+				val = I2C_MST_FIFO_CONTROL_TX_TRIG(dma_burst);
+			else
+				val = I2C_FIFO_CONTROL_TX_TRIG(dma_burst);
+		}
+
+		slv_config.device_fc = true;
+		err = dmaengine_slave_config(chan, &slv_config);
+		if (err) {
+			dev_err(i2c_dev->dev, "DMA config failed: %d\n", err);
+			dev_err(i2c_dev->dev, "falling back to PIO\n");
+
+			tegra_i2c_release_dma(i2c_dev);
+			i2c_dev->dma_mode = false;
+		} else {
+			goto out;
+		}
+	}
+
+	if (i2c_dev->hw->has_mst_fifo)
+		val = I2C_MST_FIFO_CONTROL_TX_TRIG(8) |
+		      I2C_MST_FIFO_CONTROL_RX_TRIG(1);
+	else
+		val = I2C_FIFO_CONTROL_TX_TRIG(8) |
+		      I2C_FIFO_CONTROL_RX_TRIG(1);
+out:
+	i2c_writel(i2c_dev, val, reg);
+}
+
+static unsigned long tegra_i2c_poll_completion(struct tegra_i2c_dev *i2c_dev,
+					       struct completion *complete,
+					       unsigned int timeout_ms)
+{
+	ktime_t ktime = ktime_get();
+	ktime_t ktimeout = ktime_add_ms(ktime, timeout_ms);
+
+	do {
+		u32 status = i2c_readl(i2c_dev, I2C_INT_STATUS);
+
+		if (status)
+			tegra_i2c_isr(i2c_dev->irq, i2c_dev);
+
+		if (completion_done(complete)) {
+			s64 delta = ktime_ms_delta(ktimeout, ktime);
+
+			return msecs_to_jiffies(delta) ?: 1;
+		}
+
+		ktime = ktime_get();
+
+	} while (ktime_before(ktime, ktimeout));
+
+	return 0;
+}
+
+static unsigned long tegra_i2c_wait_completion(struct tegra_i2c_dev *i2c_dev,
+					       struct completion *complete,
+					       unsigned int timeout_ms)
+{
+	unsigned long ret;
+
+	if (i2c_dev->atomic_mode) {
+		ret = tegra_i2c_poll_completion(i2c_dev, complete, timeout_ms);
+	} else {
+		enable_irq(i2c_dev->irq);
+		ret = wait_for_completion_timeout(complete,
+						  msecs_to_jiffies(timeout_ms));
+		disable_irq(i2c_dev->irq);
+
+		/*
+		 * Under some rare circumstances (like running KASAN +
+		 * NFS root) CPU, which handles interrupt, may stuck in
+		 * uninterruptible state for a significant time.  In this
+		 * case we will get timeout if I2C transfer is running on
+		 * a sibling CPU, despite of IRQ being raised.
+		 *
+		 * In order to handle this rare condition, the IRQ status
+		 * needs to be checked after timeout.
+		 */
+		if (ret == 0)
+			ret = tegra_i2c_poll_completion(i2c_dev, complete, 0);
+	}
+
+	return ret;
+}
+
+static int tegra_i2c_issue_bus_clear(struct i2c_adapter *adap)
+{
+	struct tegra_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
+	u32 val, time_left;
+	int err;
+
+	reinit_completion(&i2c_dev->msg_complete);
+
+	val = FIELD_PREP(I2C_BC_SCLK_THRESHOLD, 9) | I2C_BC_STOP_COND |
+	      I2C_BC_TERMINATE;
+	i2c_writel(i2c_dev, val, I2C_BUS_CLEAR_CNFG);
+
+	err = tegra_i2c_wait_for_config_load(i2c_dev);
+	if (err)
+		return err;
+
+	val |= I2C_BC_ENABLE;
+	i2c_writel(i2c_dev, val, I2C_BUS_CLEAR_CNFG);
+	tegra_i2c_unmask_irq(i2c_dev, I2C_INT_BUS_CLR_DONE);
+
+	time_left = tegra_i2c_wait_completion(i2c_dev, &i2c_dev->msg_complete, 50);
+	tegra_i2c_mask_irq(i2c_dev, I2C_INT_BUS_CLR_DONE);
+
+	if (time_left == 0) {
+		dev_err(i2c_dev->dev, "failed to clear bus\n");
+		return -ETIMEDOUT;
+	}
+
+	val = i2c_readl(i2c_dev, I2C_BUS_CLEAR_STATUS);
+	if (!(val & I2C_BC_STATUS)) {
+		dev_err(i2c_dev->dev, "un-recovered arbitration lost\n");
+		return -EIO;
+	}
+
+	return -EAGAIN;
+}
+
+static void tegra_i2c_push_packet_header(struct tegra_i2c_dev *i2c_dev,
+					 struct i2c_msg *msg,
+					 enum msg_end_type end_state)
+{
+	u32 *dma_buf = i2c_dev->dma_buf;
+	u32 packet_header;
+
+	packet_header = FIELD_PREP(PACKET_HEADER0_HEADER_SIZE, 0) |
+			FIELD_PREP(PACKET_HEADER0_PROTOCOL,
+				   PACKET_HEADER0_PROTOCOL_I2C) |
+			FIELD_PREP(PACKET_HEADER0_CONT_ID, i2c_dev->cont_id) |
+			FIELD_PREP(PACKET_HEADER0_PACKET_ID, 1);
+
+	if (i2c_dev->dma_mode && !i2c_dev->msg_read)
+		*dma_buf++ = packet_header;
+	else
+		i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO);
+
+	packet_header = i2c_dev->msg_len - 1;
+
+	if (i2c_dev->dma_mode && !i2c_dev->msg_read)
+		*dma_buf++ = packet_header;
+	else
+		i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO);
+
+	packet_header = I2C_HEADER_IE_ENABLE;
+
+	if (end_state == MSG_END_CONTINUE)
+		packet_header |= I2C_HEADER_CONTINUE_XFER;
+	else if (end_state == MSG_END_REPEAT_START)
+		packet_header |= I2C_HEADER_REPEAT_START;
+
+	if (msg->flags & I2C_M_TEN) {
+		packet_header |= msg->addr;
+		packet_header |= I2C_HEADER_10BIT_ADDR;
+	} else {
+		packet_header |= msg->addr << I2C_HEADER_SLAVE_ADDR_SHIFT;
+	}
+
+	if (msg->flags & I2C_M_IGNORE_NAK)
+		packet_header |= I2C_HEADER_CONT_ON_NAK;
+
+	if (msg->flags & I2C_M_RD)
+		packet_header |= I2C_HEADER_READ;
+
+	if (i2c_dev->dma_mode && !i2c_dev->msg_read)
+		*dma_buf++ = packet_header;
+	else
+		i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO);
+}
+
+static int tegra_i2c_error_recover(struct tegra_i2c_dev *i2c_dev,
+				   struct i2c_msg *msg)
+{
+	if (i2c_dev->msg_err == I2C_ERR_NONE)
+		return 0;
+
+	tegra_i2c_init(i2c_dev);
+
+	/* start recovery upon arbitration loss in single master mode */
+	if (i2c_dev->msg_err == I2C_ERR_ARBITRATION_LOST) {
+		if (!i2c_dev->multimaster_mode)
+			return i2c_recover_bus(&i2c_dev->adapter);
+
+		return -EAGAIN;
+	}
+
+	if (i2c_dev->msg_err == I2C_ERR_NO_ACK) {
+		if (msg->flags & I2C_M_IGNORE_NAK)
+			return 0;
+
+		return -EREMOTEIO;
+	}
+
+	return -EIO;
+}
+
+static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
+			      struct i2c_msg *msg,
+			      enum msg_end_type end_state)
+{
+	unsigned long time_left, xfer_time = 100;
+	size_t xfer_size;
+	u32 int_mask;
+	int err;
+
+	err = tegra_i2c_flush_fifos(i2c_dev);
+	if (err)
+		return err;
+
+	i2c_dev->msg_buf = msg->buf;
+	i2c_dev->msg_len = msg->len;
+
+	i2c_dev->msg_err = I2C_ERR_NONE;
+	i2c_dev->msg_read = !!(msg->flags & I2C_M_RD);
+	reinit_completion(&i2c_dev->msg_complete);
+
+	/*
+	 * For SMBUS block read command, read only 1 byte in the first transfer.
+	 * Adjust that 1 byte for the next transfer in the msg buffer and msg
+	 * length.
+	 */
+	if (msg->flags & I2C_M_RECV_LEN) {
+		if (end_state == MSG_END_CONTINUE) {
+			i2c_dev->msg_len = 1;
+		} else {
+			i2c_dev->msg_buf += 1;
+			i2c_dev->msg_len -= 1;
+		}
+	}
+
+	i2c_dev->msg_buf_remaining = i2c_dev->msg_len;
+
+	if (i2c_dev->msg_read)
+		xfer_size = i2c_dev->msg_len;
+	else
+		xfer_size = i2c_dev->msg_len + I2C_PACKET_HEADER_SIZE;
+
+	xfer_size = ALIGN(xfer_size, BYTES_PER_FIFO_WORD);
+
+	i2c_dev->dma_mode = xfer_size > I2C_PIO_MODE_PREFERRED_LEN &&
+			    i2c_dev->dma_buf && !i2c_dev->atomic_mode;
+
+	tegra_i2c_config_fifo_trig(i2c_dev, xfer_size);
+
+	/*
+	 * Transfer time in mSec = Total bits / transfer rate
+	 * Total bits = 9 bits per byte (including ACK bit) + Start & stop bits
+	 */
+	xfer_time += DIV_ROUND_CLOSEST(((xfer_size * 9) + 2) * MSEC_PER_SEC,
+				       i2c_dev->timings.bus_freq_hz);
+
+	int_mask = I2C_INT_NO_ACK | I2C_INT_ARBITRATION_LOST;
+	tegra_i2c_unmask_irq(i2c_dev, int_mask);
+
+	if (i2c_dev->dma_mode) {
+		if (i2c_dev->msg_read) {
+			dma_sync_single_for_device(i2c_dev->dma_dev,
+						   i2c_dev->dma_phys,
+						   xfer_size, DMA_FROM_DEVICE);
+
+			err = tegra_i2c_dma_submit(i2c_dev, xfer_size);
+			if (err)
+				return err;
+		} else {
+			dma_sync_single_for_cpu(i2c_dev->dma_dev,
+						i2c_dev->dma_phys,
+						xfer_size, DMA_TO_DEVICE);
+		}
+	}
+
+	tegra_i2c_push_packet_header(i2c_dev, msg, end_state);
+
+	if (!i2c_dev->msg_read) {
+		if (i2c_dev->dma_mode) {
+			memcpy(i2c_dev->dma_buf + I2C_PACKET_HEADER_SIZE,
+			       msg->buf, i2c_dev->msg_len);
+
+			dma_sync_single_for_device(i2c_dev->dma_dev,
+						   i2c_dev->dma_phys,
+						   xfer_size, DMA_TO_DEVICE);
+
+			err = tegra_i2c_dma_submit(i2c_dev, xfer_size);
+			if (err)
+				return err;
+		} else {
+			tegra_i2c_fill_tx_fifo(i2c_dev);
+		}
+	}
+
+	if (i2c_dev->hw->has_per_pkt_xfer_complete_irq)
+		int_mask |= I2C_INT_PACKET_XFER_COMPLETE;
+
+	if (!i2c_dev->dma_mode) {
+		if (msg->flags & I2C_M_RD)
+			int_mask |= I2C_INT_RX_FIFO_DATA_REQ;
+		else if (i2c_dev->msg_buf_remaining)
+			int_mask |= I2C_INT_TX_FIFO_DATA_REQ;
+	}
+
+	tegra_i2c_unmask_irq(i2c_dev, int_mask);
+	dev_dbg(i2c_dev->dev, "unmasked IRQ: %02x\n",
+		i2c_readl(i2c_dev, I2C_INT_MASK));
+
+	if (i2c_dev->dma_mode) {
+		time_left = tegra_i2c_wait_completion(i2c_dev,
+						      &i2c_dev->dma_complete,
+						      xfer_time);
+
+		/*
+		 * Synchronize DMA first, since dmaengine_terminate_sync()
+		 * performs synchronization after the transfer's termination
+		 * and we want to get a completion if transfer succeeded.
+		 */
+		dmaengine_synchronize(i2c_dev->msg_read ?
+				      i2c_dev->rx_dma_chan :
+				      i2c_dev->tx_dma_chan);
+
+		dmaengine_terminate_sync(i2c_dev->msg_read ?
+					 i2c_dev->rx_dma_chan :
+					 i2c_dev->tx_dma_chan);
+
+		if (!time_left && !completion_done(&i2c_dev->dma_complete)) {
+			dev_err(i2c_dev->dev, "DMA transfer timed out\n");
+			tegra_i2c_init(i2c_dev);
+			return -ETIMEDOUT;
+		}
+
+		if (i2c_dev->msg_read && i2c_dev->msg_err == I2C_ERR_NONE) {
+			dma_sync_single_for_cpu(i2c_dev->dma_dev,
+						i2c_dev->dma_phys,
+						xfer_size, DMA_FROM_DEVICE);
+
+			memcpy(i2c_dev->msg_buf, i2c_dev->dma_buf, i2c_dev->msg_len);
+		}
+	}
+
+	time_left = tegra_i2c_wait_completion(i2c_dev, &i2c_dev->msg_complete,
+					      xfer_time);
+
+	tegra_i2c_mask_irq(i2c_dev, int_mask);
+
+	if (time_left == 0) {
+		dev_err(i2c_dev->dev, "I2C transfer timed out\n");
+		tegra_i2c_init(i2c_dev);
+		return -ETIMEDOUT;
+	}
+
+	dev_dbg(i2c_dev->dev, "transfer complete: %lu %d %d\n",
+		time_left, completion_done(&i2c_dev->msg_complete),
+		i2c_dev->msg_err);
+
+	i2c_dev->dma_mode = false;
+
+	err = tegra_i2c_error_recover(i2c_dev, msg);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
+			  int num)
+{
+	struct tegra_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
+	int i, ret;
+
+	ret = pm_runtime_get_sync(i2c_dev->dev);
+	if (ret < 0) {
+		dev_err(i2c_dev->dev, "runtime resume failed %d\n", ret);
+		pm_runtime_put_noidle(i2c_dev->dev);
+		return ret;
+	}
+
+	for (i = 0; i < num; i++) {
+		enum msg_end_type end_type = MSG_END_STOP;
+
+		if (i < (num - 1)) {
+			/* check whether follow up message is coming */
+			if (msgs[i + 1].flags & I2C_M_NOSTART)
+				end_type = MSG_END_CONTINUE;
+			else
+				end_type = MSG_END_REPEAT_START;
+		}
+		/* If M_RECV_LEN use ContinueXfer to read the first byte */
+		if (msgs[i].flags & I2C_M_RECV_LEN) {
+			ret = tegra_i2c_xfer_msg(i2c_dev, &msgs[i], MSG_END_CONTINUE);
+			if (ret)
+				break;
+			/* Set the msg length from first byte */
+			msgs[i].len += msgs[i].buf[0];
+			dev_dbg(i2c_dev->dev, "reading %d bytes\n", msgs[i].len);
+		}
+		ret = tegra_i2c_xfer_msg(i2c_dev, &msgs[i], end_type);
+		if (ret)
+			break;
+	}
+
+	pm_runtime_put(i2c_dev->dev);
+
+	return ret ?: i;
+}
+
+static int tegra_i2c_xfer_atomic(struct i2c_adapter *adap,
+				 struct i2c_msg msgs[], int num)
+{
+	struct tegra_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
+	int ret;
+
+	i2c_dev->atomic_mode = true;
+	ret = tegra_i2c_xfer(adap, msgs, num);
+	i2c_dev->atomic_mode = false;
+
+	return ret;
+}
+
+static u32 tegra_i2c_func(struct i2c_adapter *adap)
+{
+	struct tegra_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
+	u32 ret = I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK) |
+		  I2C_FUNC_10BIT_ADDR | I2C_FUNC_PROTOCOL_MANGLING;
+
+	if (i2c_dev->hw->has_continue_xfer_support)
+		ret |= I2C_FUNC_NOSTART | I2C_FUNC_SMBUS_READ_BLOCK_DATA;
+
+	return ret;
+}
+
+static const struct i2c_algorithm tegra_i2c_algo = {
+	.master_xfer		= tegra_i2c_xfer,
+	.master_xfer_atomic	= tegra_i2c_xfer_atomic,
+	.functionality		= tegra_i2c_func,
+};
+
+/* payload size is only 12 bit */
+static const struct i2c_adapter_quirks tegra_i2c_quirks = {
+	.flags = I2C_AQ_NO_ZERO_LEN,
+	.max_read_len = SZ_4K,
+	.max_write_len = SZ_4K - I2C_PACKET_HEADER_SIZE,
+};
+
+static const struct i2c_adapter_quirks tegra194_i2c_quirks = {
+	.flags = I2C_AQ_NO_ZERO_LEN,
+	.max_write_len = SZ_64K - I2C_PACKET_HEADER_SIZE,
+};
+
+static struct i2c_bus_recovery_info tegra_i2c_recovery_info = {
+	.recover_bus = tegra_i2c_issue_bus_clear,
+};
+
+static const struct tegra_i2c_hw_feature tegra20_i2c_hw = {
+	.has_continue_xfer_support = false,
+	.has_per_pkt_xfer_complete_irq = false,
+	.clk_divisor_hs_mode = 3,
+	.clk_divisor_std_mode = 0,
+	.clk_divisor_fast_mode = 0,
+	.clk_divisor_fast_plus_mode = 0,
+	.has_config_load_reg = false,
+	.has_multi_master_mode = false,
+	.has_slcg_override_reg = false,
+	.has_mst_fifo = false,
+	.quirks = &tegra_i2c_quirks,
+	.supports_bus_clear = false,
+	.has_apb_dma = true,
+	.tlow_std_mode = 0x4,
+	.thigh_std_mode = 0x2,
+	.tlow_fast_fastplus_mode = 0x4,
+	.thigh_fast_fastplus_mode = 0x2,
+	.setup_hold_time_std_mode = 0x0,
+	.setup_hold_time_fast_fast_plus_mode = 0x0,
+	.setup_hold_time_hs_mode = 0x0,
+	.has_interface_timing_reg = false,
+};
+
+static const struct tegra_i2c_hw_feature tegra30_i2c_hw = {
+	.has_continue_xfer_support = true,
+	.has_per_pkt_xfer_complete_irq = false,
+	.clk_divisor_hs_mode = 3,
+	.clk_divisor_std_mode = 0,
+	.clk_divisor_fast_mode = 0,
+	.clk_divisor_fast_plus_mode = 0,
+	.has_config_load_reg = false,
+	.has_multi_master_mode = false,
+	.has_slcg_override_reg = false,
+	.has_mst_fifo = false,
+	.quirks = &tegra_i2c_quirks,
+	.supports_bus_clear = false,
+	.has_apb_dma = true,
+	.tlow_std_mode = 0x4,
+	.thigh_std_mode = 0x2,
+	.tlow_fast_fastplus_mode = 0x4,
+	.thigh_fast_fastplus_mode = 0x2,
+	.setup_hold_time_std_mode = 0x0,
+	.setup_hold_time_fast_fast_plus_mode = 0x0,
+	.setup_hold_time_hs_mode = 0x0,
+	.has_interface_timing_reg = false,
+};
+
+static const struct tegra_i2c_hw_feature tegra114_i2c_hw = {
+	.has_continue_xfer_support = true,
+	.has_per_pkt_xfer_complete_irq = true,
+	.clk_divisor_hs_mode = 1,
+	.clk_divisor_std_mode = 0x19,
+	.clk_divisor_fast_mode = 0x19,
+	.clk_divisor_fast_plus_mode = 0x10,
+	.has_config_load_reg = false,
+	.has_multi_master_mode = false,
+	.has_slcg_override_reg = false,
+	.has_mst_fifo = false,
+	.quirks = &tegra_i2c_quirks,
+	.supports_bus_clear = true,
+	.has_apb_dma = true,
+	.tlow_std_mode = 0x4,
+	.thigh_std_mode = 0x2,
+	.tlow_fast_fastplus_mode = 0x4,
+	.thigh_fast_fastplus_mode = 0x2,
+	.setup_hold_time_std_mode = 0x0,
+	.setup_hold_time_fast_fast_plus_mode = 0x0,
+	.setup_hold_time_hs_mode = 0x0,
+	.has_interface_timing_reg = false,
+};
+
+static const struct tegra_i2c_hw_feature tegra124_i2c_hw = {
+	.has_continue_xfer_support = true,
+	.has_per_pkt_xfer_complete_irq = true,
+	.clk_divisor_hs_mode = 1,
+	.clk_divisor_std_mode = 0x19,
+	.clk_divisor_fast_mode = 0x19,
+	.clk_divisor_fast_plus_mode = 0x10,
+	.has_config_load_reg = true,
+	.has_multi_master_mode = false,
+	.has_slcg_override_reg = true,
+	.has_mst_fifo = false,
+	.quirks = &tegra_i2c_quirks,
+	.supports_bus_clear = true,
+	.has_apb_dma = true,
+	.tlow_std_mode = 0x4,
+	.thigh_std_mode = 0x2,
+	.tlow_fast_fastplus_mode = 0x4,
+	.thigh_fast_fastplus_mode = 0x2,
+	.setup_hold_time_std_mode = 0x0,
+	.setup_hold_time_fast_fast_plus_mode = 0x0,
+	.setup_hold_time_hs_mode = 0x0,
+	.has_interface_timing_reg = true,
+};
+
+static const struct tegra_i2c_hw_feature tegra210_i2c_hw = {
+	.has_continue_xfer_support = true,
+	.has_per_pkt_xfer_complete_irq = true,
+	.clk_divisor_hs_mode = 1,
+	.clk_divisor_std_mode = 0x19,
+	.clk_divisor_fast_mode = 0x19,
+	.clk_divisor_fast_plus_mode = 0x10,
+	.has_config_load_reg = true,
+	.has_multi_master_mode = false,
+	.has_slcg_override_reg = true,
+	.has_mst_fifo = false,
+	.quirks = &tegra_i2c_quirks,
+	.supports_bus_clear = true,
+	.has_apb_dma = true,
+	.tlow_std_mode = 0x4,
+	.thigh_std_mode = 0x2,
+	.tlow_fast_fastplus_mode = 0x4,
+	.thigh_fast_fastplus_mode = 0x2,
+	.setup_hold_time_std_mode = 0,
+	.setup_hold_time_fast_fast_plus_mode = 0,
+	.setup_hold_time_hs_mode = 0,
+	.has_interface_timing_reg = true,
+};
+
+static const struct tegra_i2c_hw_feature tegra186_i2c_hw = {
+	.has_continue_xfer_support = true,
+	.has_per_pkt_xfer_complete_irq = true,
+	.clk_divisor_hs_mode = 1,
+	.clk_divisor_std_mode = 0x16,
+	.clk_divisor_fast_mode = 0x19,
+	.clk_divisor_fast_plus_mode = 0x10,
+	.has_config_load_reg = true,
+	.has_multi_master_mode = false,
+	.has_slcg_override_reg = true,
+	.has_mst_fifo = false,
+	.quirks = &tegra_i2c_quirks,
+	.supports_bus_clear = true,
+	.has_apb_dma = false,
+	.tlow_std_mode = 0x4,
+	.thigh_std_mode = 0x3,
+	.tlow_fast_fastplus_mode = 0x4,
+	.thigh_fast_fastplus_mode = 0x2,
+	.setup_hold_time_std_mode = 0,
+	.setup_hold_time_fast_fast_plus_mode = 0,
+	.setup_hold_time_hs_mode = 0,
+	.has_interface_timing_reg = true,
+};
+
+static const struct tegra_i2c_hw_feature tegra194_i2c_hw = {
+	.has_continue_xfer_support = true,
+	.has_per_pkt_xfer_complete_irq = true,
+	.clk_divisor_hs_mode = 1,
+	.clk_divisor_std_mode = 0x4f,
+	.clk_divisor_fast_mode = 0x3c,
+	.clk_divisor_fast_plus_mode = 0x16,
+	.has_config_load_reg = true,
+	.has_multi_master_mode = true,
+	.has_slcg_override_reg = true,
+	.has_mst_fifo = true,
+	.quirks = &tegra194_i2c_quirks,
+	.supports_bus_clear = true,
+	.has_apb_dma = false,
+	.tlow_std_mode = 0x8,
+	.thigh_std_mode = 0x7,
+	.tlow_fast_fastplus_mode = 0x2,
+	.thigh_fast_fastplus_mode = 0x2,
+	.setup_hold_time_std_mode = 0x08080808,
+	.setup_hold_time_fast_fast_plus_mode = 0x02020202,
+	.setup_hold_time_hs_mode = 0x090909,
+	.has_interface_timing_reg = true,
+};
+
+static const struct of_device_id tegra_i2c_of_match[] = {
+	{ .compatible = "nvidia,tegra194-i2c", .data = &tegra194_i2c_hw, },
+	{ .compatible = "nvidia,tegra186-i2c", .data = &tegra186_i2c_hw, },
+	{ .compatible = "nvidia,tegra210-i2c-vi", .data = &tegra210_i2c_hw, },
+	{ .compatible = "nvidia,tegra210-i2c", .data = &tegra210_i2c_hw, },
+	{ .compatible = "nvidia,tegra124-i2c", .data = &tegra124_i2c_hw, },
+	{ .compatible = "nvidia,tegra114-i2c", .data = &tegra114_i2c_hw, },
+	{ .compatible = "nvidia,tegra30-i2c", .data = &tegra30_i2c_hw, },
+	{ .compatible = "nvidia,tegra20-i2c", .data = &tegra20_i2c_hw, },
+	{ .compatible = "nvidia,tegra20-i2c-dvc", .data = &tegra20_i2c_hw, },
+	{},
+};
+MODULE_DEVICE_TABLE(of, tegra_i2c_of_match);
+
+static void tegra_i2c_parse_dt(struct tegra_i2c_dev *i2c_dev)
+{
+	struct device_node *np = i2c_dev->dev->of_node;
+	bool multi_mode;
+
+	i2c_parse_fw_timings(i2c_dev->dev, &i2c_dev->timings, true);
+
+	multi_mode = device_property_read_bool(i2c_dev->dev, "multi-master");
+	i2c_dev->multimaster_mode = multi_mode;
+
+	if (of_device_is_compatible(np, "nvidia,tegra20-i2c-dvc"))
+		i2c_dev->is_dvc = true;
+
+	if (of_device_is_compatible(np, "nvidia,tegra210-i2c-vi"))
+		i2c_dev->is_vi = true;
+}
+
+static int tegra_i2c_init_reset(struct tegra_i2c_dev *i2c_dev)
+{
+	if (ACPI_HANDLE(i2c_dev->dev))
+		return 0;
+
+	i2c_dev->rst = devm_reset_control_get_exclusive(i2c_dev->dev, "i2c");
+	if (IS_ERR(i2c_dev->rst))
+		return dev_err_probe(i2c_dev->dev, PTR_ERR(i2c_dev->rst),
+				      "failed to get reset control\n");
+
+	return 0;
+}
+
+static int tegra_i2c_init_clocks(struct tegra_i2c_dev *i2c_dev)
+{
+	int err;
+
+	if (ACPI_HANDLE(i2c_dev->dev))
+		return 0;
+
+	i2c_dev->clocks[i2c_dev->nclocks++].id = "div-clk";
+
+	if (i2c_dev->hw == &tegra20_i2c_hw || i2c_dev->hw == &tegra30_i2c_hw)
+		i2c_dev->clocks[i2c_dev->nclocks++].id = "fast-clk";
+
+	if (i2c_dev->is_vi)
+		i2c_dev->clocks[i2c_dev->nclocks++].id = "slow";
+
+	err = devm_clk_bulk_get(i2c_dev->dev, i2c_dev->nclocks,
+				i2c_dev->clocks);
+	if (err)
+		return err;
+
+	err = clk_bulk_prepare(i2c_dev->nclocks, i2c_dev->clocks);
+	if (err)
+		return err;
+
+	i2c_dev->div_clk = i2c_dev->clocks[0].clk;
+
+	if (!i2c_dev->multimaster_mode)
+		return 0;
+
+	err = clk_enable(i2c_dev->div_clk);
+	if (err) {
+		dev_err(i2c_dev->dev, "failed to enable div-clk: %d\n", err);
+		goto unprepare_clocks;
+	}
+
+	return 0;
+
+unprepare_clocks:
+	clk_bulk_unprepare(i2c_dev->nclocks, i2c_dev->clocks);
+
+	return err;
+}
+
+static void tegra_i2c_release_clocks(struct tegra_i2c_dev *i2c_dev)
+{
+	if (i2c_dev->multimaster_mode)
+		clk_disable(i2c_dev->div_clk);
+
+	clk_bulk_unprepare(i2c_dev->nclocks, i2c_dev->clocks);
+}
+
+static int tegra_i2c_init_hardware(struct tegra_i2c_dev *i2c_dev)
+{
+	int ret;
+
+	ret = pm_runtime_get_sync(i2c_dev->dev);
+	if (ret < 0)
+		dev_err(i2c_dev->dev, "runtime resume failed: %d\n", ret);
+	else
+		ret = tegra_i2c_init(i2c_dev);
+
+	pm_runtime_put_sync(i2c_dev->dev);
+
+	return ret;
+}
+
+static int tegra_i2c_probe(struct platform_device *pdev)
+{
+	struct tegra_i2c_dev *i2c_dev;
+	struct resource *res;
+	int err;
+
+	i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL);
+	if (!i2c_dev)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, i2c_dev);
+
+	init_completion(&i2c_dev->msg_complete);
+	init_completion(&i2c_dev->dma_complete);
+
+	i2c_dev->hw = device_get_match_data(&pdev->dev);
+	i2c_dev->cont_id = pdev->id;
+	i2c_dev->dev = &pdev->dev;
+
+	i2c_dev->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+	if (IS_ERR(i2c_dev->base))
+		return PTR_ERR(i2c_dev->base);
+
+	i2c_dev->base_phys = res->start;
+
+	err = platform_get_irq(pdev, 0);
+	if (err < 0)
+		return err;
+
+	i2c_dev->irq = err;
+
+	/* interrupt will be enabled during of transfer time */
+	irq_set_status_flags(i2c_dev->irq, IRQ_NOAUTOEN);
+
+	err = devm_request_threaded_irq(i2c_dev->dev, i2c_dev->irq,
+					NULL, tegra_i2c_isr,
+					IRQF_NO_SUSPEND | IRQF_ONESHOT,
+					dev_name(i2c_dev->dev), i2c_dev);
+	if (err)
+		return err;
+
+	tegra_i2c_parse_dt(i2c_dev);
+
+	err = tegra_i2c_init_reset(i2c_dev);
+	if (err)
+		return err;
+
+	err = tegra_i2c_init_clocks(i2c_dev);
+	if (err)
+		return err;
+
+	err = tegra_i2c_init_dma(i2c_dev);
+	if (err)
+		goto release_clocks;
+
+	/*
+	 * VI I2C is in VE power domain which is not always ON and not
+	 * IRQ-safe.  Thus, IRQ-safe device shouldn't be attached to a
+	 * non IRQ-safe domain because this prevents powering off the power
+	 * domain.
+	 *
+	 * VI I2C device shouldn't be marked as IRQ-safe because VI I2C won't
+	 * be used for atomic transfers.
+	 */
+	if (!i2c_dev->is_vi)
+		pm_runtime_irq_safe(i2c_dev->dev);
+
+	pm_runtime_enable(i2c_dev->dev);
+
+	err = tegra_i2c_init_hardware(i2c_dev);
+	if (err)
+		goto release_rpm;
+
+	i2c_set_adapdata(&i2c_dev->adapter, i2c_dev);
+	i2c_dev->adapter.dev.of_node = i2c_dev->dev->of_node;
+	i2c_dev->adapter.dev.parent = i2c_dev->dev;
+	i2c_dev->adapter.retries = 1;
+	i2c_dev->adapter.timeout = 6 * HZ;
+	i2c_dev->adapter.quirks = i2c_dev->hw->quirks;
+	i2c_dev->adapter.owner = THIS_MODULE;
+	i2c_dev->adapter.class = I2C_CLASS_DEPRECATED;
+	i2c_dev->adapter.algo = &tegra_i2c_algo;
+	i2c_dev->adapter.nr = pdev->id;
+
+	if (i2c_dev->hw->supports_bus_clear)
+		i2c_dev->adapter.bus_recovery_info = &tegra_i2c_recovery_info;
+
+	strscpy(i2c_dev->adapter.name, dev_name(i2c_dev->dev),
+		sizeof(i2c_dev->adapter.name));
+
+	err = i2c_add_numbered_adapter(&i2c_dev->adapter);
+	if (err)
+		goto release_rpm;
+
+	return 0;
+
+release_rpm:
+	pm_runtime_disable(i2c_dev->dev);
+
+	tegra_i2c_release_dma(i2c_dev);
+release_clocks:
+	tegra_i2c_release_clocks(i2c_dev);
+
+	return err;
+}
+
+static int tegra_i2c_remove(struct platform_device *pdev)
+{
+	struct tegra_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&i2c_dev->adapter);
+	pm_runtime_force_suspend(i2c_dev->dev);
+
+	tegra_i2c_release_dma(i2c_dev);
+	tegra_i2c_release_clocks(i2c_dev);
+
+	return 0;
+}
+
+static int __maybe_unused tegra_i2c_runtime_resume(struct device *dev)
+{
+	struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
+	int err;
+
+	err = pinctrl_pm_select_default_state(dev);
+	if (err)
+		return err;
+
+	err = clk_bulk_enable(i2c_dev->nclocks, i2c_dev->clocks);
+	if (err)
+		return err;
+
+	/*
+	 * VI I2C device is attached to VE power domain which goes through
+	 * power ON/OFF during runtime PM resume/suspend, meaning that
+	 * controller needs to be re-initialized after power ON.
+	 */
+	if (i2c_dev->is_vi) {
+		err = tegra_i2c_init(i2c_dev);
+		if (err)
+			goto disable_clocks;
+	}
+
+	return 0;
+
+disable_clocks:
+	clk_bulk_disable(i2c_dev->nclocks, i2c_dev->clocks);
+
+	return err;
+}
+
+static int __maybe_unused tegra_i2c_runtime_suspend(struct device *dev)
+{
+	struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
+
+	clk_bulk_disable(i2c_dev->nclocks, i2c_dev->clocks);
+
+	return pinctrl_pm_select_idle_state(dev);
+}
+
+static int __maybe_unused tegra_i2c_suspend(struct device *dev)
+{
+	struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
+	int err;
+
+	i2c_mark_adapter_suspended(&i2c_dev->adapter);
+
+	if (!pm_runtime_status_suspended(dev)) {
+		err = tegra_i2c_runtime_suspend(dev);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+static int __maybe_unused tegra_i2c_resume(struct device *dev)
+{
+	struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
+	int err;
+
+	/*
+	 * We need to ensure that clocks are enabled so that registers can be
+	 * restored in tegra_i2c_init().
+	 */
+	err = tegra_i2c_runtime_resume(dev);
+	if (err)
+		return err;
+
+	err = tegra_i2c_init(i2c_dev);
+	if (err)
+		return err;
+
+	/*
+	 * In case we are runtime suspended, disable clocks again so that we
+	 * don't unbalance the clock reference counts during the next runtime
+	 * resume transition.
+	 */
+	if (pm_runtime_status_suspended(dev)) {
+		err = tegra_i2c_runtime_suspend(dev);
+		if (err)
+			return err;
+	}
+
+	i2c_mark_adapter_resumed(&i2c_dev->adapter);
+
+	return 0;
+}
+
+static const struct dev_pm_ops tegra_i2c_pm = {
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(tegra_i2c_suspend, tegra_i2c_resume)
+	SET_RUNTIME_PM_OPS(tegra_i2c_runtime_suspend, tegra_i2c_runtime_resume,
+			   NULL)
+};
+
+static const struct acpi_device_id tegra_i2c_acpi_match[] = {
+	{.id = "NVDA0101", .driver_data = (kernel_ulong_t)&tegra210_i2c_hw},
+	{.id = "NVDA0201", .driver_data = (kernel_ulong_t)&tegra186_i2c_hw},
+	{.id = "NVDA0301", .driver_data = (kernel_ulong_t)&tegra194_i2c_hw},
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, tegra_i2c_acpi_match);
+
+static struct platform_driver tegra_i2c_driver = {
+	.probe = tegra_i2c_probe,
+	.remove = tegra_i2c_remove,
+	.driver = {
+		.name = "tegra-i2c",
+		.of_match_table = tegra_i2c_of_match,
+		.acpi_match_table = tegra_i2c_acpi_match,
+		.pm = &tegra_i2c_pm,
+	},
+};
+module_platform_driver(tegra_i2c_driver);
+
+MODULE_DESCRIPTION("NVIDIA Tegra I2C Bus Controller driver");
+MODULE_AUTHOR("Colin Cross");
+MODULE_LICENSE("GPL v2");