Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

12 files changed, 2990 insertions, 0 deletions

diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig
new file mode 100644
index 000000000..ea838dbae
--- /dev/null
+++ b/drivers/i2c/muxes/Kconfig
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Multiplexer I2C chip drivers configuration
+#
+
+menu "Multiplexer I2C Chip support"
+	depends on I2C_MUX
+
+config I2C_ARB_GPIO_CHALLENGE
+	tristate "GPIO-based I2C arbitration"
+	depends on GPIOLIB || COMPILE_TEST
+	depends on OF
+	help
+	  If you say yes to this option, support will be included for an
+	  I2C multimaster arbitration scheme using GPIOs and a challenge &
+	  response mechanism where masters have to claim the bus by asserting
+	  a GPIO.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-arb-gpio-challenge.
+
+config I2C_MUX_GPIO
+	tristate "GPIO-based I2C multiplexer"
+	depends on GPIOLIB
+	help
+	  If you say yes to this option, support will be included for a
+	  GPIO based I2C multiplexer. This driver provides access to
+	  I2C busses connected through a MUX, which is controlled
+	  through GPIO pins.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-mux-gpio.
+
+config I2C_MUX_GPMUX
+	tristate "General Purpose I2C multiplexer"
+	select MULTIPLEXER
+	depends on OF
+	help
+	  If you say yes to this option, support will be included for a
+	  general purpose I2C multiplexer. This driver provides access to
+	  I2C busses connected through a MUX, which in turn is controlled
+	  by a MUX-controller from the MUX subsystem.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-mux-gpmux.
+
+config I2C_MUX_LTC4306
+	tristate "LTC LTC4306/5 I2C multiplexer"
+	select GPIOLIB
+	select REGMAP_I2C
+	help
+	  If you say yes here you get support for the Analog Devices
+	  LTC4306 or LTC4305 I2C mux/switch devices.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-mux-ltc4306.
+
+config I2C_MUX_PCA9541
+	tristate "NXP PCA9541 I2C Master Selector"
+	help
+	  If you say yes here you get support for the NXP PCA9541
+	  I2C Master Selector.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-mux-pca9541.
+
+config I2C_MUX_PCA954x
+	tristate "NXP PCA954x and PCA984x I2C Mux/switches"
+	depends on GPIOLIB || COMPILE_TEST
+	help
+	  If you say yes here you get support for the NXP PCA954x
+	  and PCA984x I2C mux/switch devices.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-mux-pca954x.
+
+config I2C_MUX_PINCTRL
+	tristate "pinctrl-based I2C multiplexer"
+	depends on PINCTRL
+	depends on OF
+	help
+	  If you say yes to this option, support will be included for an I2C
+	  multiplexer that uses the pinctrl subsystem, i.e. pin multiplexing.
+	  This is useful for SoCs whose I2C module's signals can be routed to
+	  different sets of pins at run-time.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called i2c-mux-pinctrl.
+
+config I2C_MUX_REG
+	tristate "Register-based I2C multiplexer"
+	depends on HAS_IOMEM
+	help
+	  If you say yes to this option, support will be included for a
+	  register based I2C multiplexer. This driver provides access to
+	  I2C busses connected through a MUX, which is controlled
+	  by a single register.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-mux-reg.
+
+config I2C_DEMUX_PINCTRL
+	tristate "pinctrl-based I2C demultiplexer"
+	depends on PINCTRL && OF
+	select OF_DYNAMIC
+	help
+	  If you say yes to this option, support will be included for an I2C
+	  demultiplexer that uses the pinctrl subsystem. This is useful if you
+	  want to change the I2C master at run-time depending on features.
+
+config I2C_MUX_MLXCPLD
+	tristate "Mellanox CPLD based I2C multiplexer"
+	help
+	  If you say yes to this option, support will be included for a
+	  CPLD based I2C multiplexer. This driver provides access to
+	  I2C busses connected through a MUX, which is controlled
+	  by a CPLD register.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-mux-mlxcpld.
+
+endmenu
diff --git a/drivers/i2c/muxes/Makefile b/drivers/i2c/muxes/Makefile
new file mode 100644
index 000000000..6d9d865e8
--- /dev/null
+++ b/drivers/i2c/muxes/Makefile
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for multiplexer I2C chip drivers.
+
+obj-$(CONFIG_I2C_ARB_GPIO_CHALLENGE)	+= i2c-arb-gpio-challenge.o
+
+obj-$(CONFIG_I2C_DEMUX_PINCTRL)		+= i2c-demux-pinctrl.o
+
+obj-$(CONFIG_I2C_MUX_GPIO)	+= i2c-mux-gpio.o
+obj-$(CONFIG_I2C_MUX_GPMUX)	+= i2c-mux-gpmux.o
+obj-$(CONFIG_I2C_MUX_LTC4306)	+= i2c-mux-ltc4306.o
+obj-$(CONFIG_I2C_MUX_MLXCPLD)	+= i2c-mux-mlxcpld.o
+obj-$(CONFIG_I2C_MUX_PCA9541)	+= i2c-mux-pca9541.o
+obj-$(CONFIG_I2C_MUX_PCA954x)	+= i2c-mux-pca954x.o
+obj-$(CONFIG_I2C_MUX_PINCTRL)	+= i2c-mux-pinctrl.o
+obj-$(CONFIG_I2C_MUX_REG)	+= i2c-mux-reg.o
+
+ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG
diff --git a/drivers/i2c/muxes/i2c-arb-gpio-challenge.c b/drivers/i2c/muxes/i2c-arb-gpio-challenge.c
new file mode 100644
index 000000000..1c7865763
--- /dev/null
+++ b/drivers/i2c/muxes/i2c-arb-gpio-challenge.c
@@ -0,0 +1,206 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * GPIO-based I2C Arbitration Using a Challenge & Response Mechanism
+ *
+ * Copyright (C) 2012 Google, Inc
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include <linux/i2c-mux.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+
+/**
+ * struct i2c_arbitrator_data - Driver data for I2C arbitrator
+ *
+ * @our_gpio: GPIO descriptor we'll use to claim.
+ * @their_gpio: GPIO descriptor that the other side will use to claim.
+ * @slew_delay_us: microseconds to wait for a GPIO to go high.
+ * @wait_retry_us: we'll attempt another claim after this many microseconds.
+ * @wait_free_us: we'll give up after this many microseconds.
+ */
+
+struct i2c_arbitrator_data {
+	struct gpio_desc *our_gpio;
+	struct gpio_desc *their_gpio;
+	unsigned int slew_delay_us;
+	unsigned int wait_retry_us;
+	unsigned int wait_free_us;
+};
+
+
+/*
+ * i2c_arbitrator_select - claim the I2C bus
+ *
+ * Use the GPIO-based signalling protocol; return -EBUSY if we fail.
+ */
+static int i2c_arbitrator_select(struct i2c_mux_core *muxc, u32 chan)
+{
+	const struct i2c_arbitrator_data *arb = i2c_mux_priv(muxc);
+	unsigned long stop_retry, stop_time;
+
+	/* Start a round of trying to claim the bus */
+	stop_time = jiffies + usecs_to_jiffies(arb->wait_free_us) + 1;
+	do {
+		/* Indicate that we want to claim the bus */
+		gpiod_set_value(arb->our_gpio, 1);
+		udelay(arb->slew_delay_us);
+
+		/* Wait for the other master to release it */
+		stop_retry = jiffies + usecs_to_jiffies(arb->wait_retry_us) + 1;
+		while (time_before(jiffies, stop_retry)) {
+			int gpio_val = gpiod_get_value(arb->their_gpio);
+
+			if (!gpio_val) {
+				/* We got it, so return */
+				return 0;
+			}
+
+			usleep_range(50, 200);
+		}
+
+		/* It didn't release, so give up, wait, and try again */
+		gpiod_set_value(arb->our_gpio, 0);
+
+		usleep_range(arb->wait_retry_us, arb->wait_retry_us * 2);
+	} while (time_before(jiffies, stop_time));
+
+	/* Give up, release our claim */
+	gpiod_set_value(arb->our_gpio, 0);
+	udelay(arb->slew_delay_us);
+	dev_err(muxc->dev, "Could not claim bus, timeout\n");
+	return -EBUSY;
+}
+
+/*
+ * i2c_arbitrator_deselect - release the I2C bus
+ *
+ * Release the I2C bus using the GPIO-based signalling protocol.
+ */
+static int i2c_arbitrator_deselect(struct i2c_mux_core *muxc, u32 chan)
+{
+	const struct i2c_arbitrator_data *arb = i2c_mux_priv(muxc);
+
+	/* Release the bus and wait for the other master to notice */
+	gpiod_set_value(arb->our_gpio, 0);
+	udelay(arb->slew_delay_us);
+
+	return 0;
+}
+
+static int i2c_arbitrator_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct device_node *parent_np;
+	struct i2c_mux_core *muxc;
+	struct i2c_arbitrator_data *arb;
+	struct gpio_desc *dummy;
+	int ret;
+
+	/* We only support probing from device tree; no platform_data */
+	if (!np) {
+		dev_err(dev, "Cannot find device tree node\n");
+		return -ENODEV;
+	}
+	if (dev_get_platdata(dev)) {
+		dev_err(dev, "Platform data is not supported\n");
+		return -EINVAL;
+	}
+
+	muxc = i2c_mux_alloc(NULL, dev, 1, sizeof(*arb), I2C_MUX_ARBITRATOR,
+			     i2c_arbitrator_select, i2c_arbitrator_deselect);
+	if (!muxc)
+		return -ENOMEM;
+	arb = i2c_mux_priv(muxc);
+
+	platform_set_drvdata(pdev, muxc);
+
+	/* Request GPIOs, our GPIO as unclaimed to begin with */
+	arb->our_gpio = devm_gpiod_get(dev, "our-claim", GPIOD_OUT_LOW);
+	if (IS_ERR(arb->our_gpio)) {
+		dev_err(dev, "could not get \"our-claim\" GPIO (%ld)\n",
+			PTR_ERR(arb->our_gpio));
+		return PTR_ERR(arb->our_gpio);
+	}
+
+	arb->their_gpio = devm_gpiod_get(dev, "their-claim", GPIOD_IN);
+	if (IS_ERR(arb->their_gpio)) {
+		dev_err(dev, "could not get \"their-claim\" GPIO (%ld)\n",
+			PTR_ERR(arb->their_gpio));
+		return PTR_ERR(arb->their_gpio);
+	}
+
+	/* At the moment we only support a single two master (us + 1 other) */
+	dummy = devm_gpiod_get_index(dev, "their-claim", 1, GPIOD_IN);
+	if (!IS_ERR(dummy)) {
+		dev_err(dev, "Only one other master is supported\n");
+		return -EINVAL;
+	} else if (PTR_ERR(dummy) == -EPROBE_DEFER) {
+		return -EPROBE_DEFER;
+	}
+
+	/* Arbitration parameters */
+	if (of_property_read_u32(np, "slew-delay-us", &arb->slew_delay_us))
+		arb->slew_delay_us = 10;
+	if (of_property_read_u32(np, "wait-retry-us", &arb->wait_retry_us))
+		arb->wait_retry_us = 3000;
+	if (of_property_read_u32(np, "wait-free-us", &arb->wait_free_us))
+		arb->wait_free_us = 50000;
+
+	/* Find our parent */
+	parent_np = of_parse_phandle(np, "i2c-parent", 0);
+	if (!parent_np) {
+		dev_err(dev, "Cannot parse i2c-parent\n");
+		return -EINVAL;
+	}
+	muxc->parent = of_get_i2c_adapter_by_node(parent_np);
+	of_node_put(parent_np);
+	if (!muxc->parent) {
+		dev_err(dev, "Cannot find parent bus\n");
+		return -EPROBE_DEFER;
+	}
+
+	/* Actually add the mux adapter */
+	ret = i2c_mux_add_adapter(muxc, 0, 0, 0);
+	if (ret)
+		i2c_put_adapter(muxc->parent);
+
+	return ret;
+}
+
+static int i2c_arbitrator_remove(struct platform_device *pdev)
+{
+	struct i2c_mux_core *muxc = platform_get_drvdata(pdev);
+
+	i2c_mux_del_adapters(muxc);
+	i2c_put_adapter(muxc->parent);
+	return 0;
+}
+
+static const struct of_device_id i2c_arbitrator_of_match[] = {
+	{ .compatible = "i2c-arb-gpio-challenge", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, i2c_arbitrator_of_match);
+
+static struct platform_driver i2c_arbitrator_driver = {
+	.probe	= i2c_arbitrator_probe,
+	.remove	= i2c_arbitrator_remove,
+	.driver	= {
+		.name	= "i2c-arb-gpio-challenge",
+		.of_match_table = i2c_arbitrator_of_match,
+	},
+};
+
+module_platform_driver(i2c_arbitrator_driver);
+
+MODULE_DESCRIPTION("GPIO-based I2C Arbitration");
+MODULE_AUTHOR("Doug Anderson <dianders@chromium.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:i2c-arb-gpio-challenge");
diff --git a/drivers/i2c/muxes/i2c-demux-pinctrl.c b/drivers/i2c/muxes/i2c-demux-pinctrl.c
new file mode 100644
index 000000000..45a3f7e7b
--- /dev/null
+++ b/drivers/i2c/muxes/i2c-demux-pinctrl.c
@@ -0,0 +1,326 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Pinctrl based I2C DeMultiplexer
+ *
+ * Copyright (C) 2015-16 by Wolfram Sang, Sang Engineering <wsa@sang-engineering.com>
+ * Copyright (C) 2015-16 by Renesas Electronics Corporation
+ *
+ * See the bindings doc for DTS setup and the sysfs doc for usage information.
+ * (look for filenames containing 'i2c-demux-pinctrl' in Documentation/)
+ */
+
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+
+struct i2c_demux_pinctrl_chan {
+	struct device_node *parent_np;
+	struct i2c_adapter *parent_adap;
+	struct of_changeset chgset;
+};
+
+struct i2c_demux_pinctrl_priv {
+	int cur_chan;
+	int num_chan;
+	struct device *dev;
+	const char *bus_name;
+	struct i2c_adapter cur_adap;
+	struct i2c_algorithm algo;
+	struct i2c_demux_pinctrl_chan chan[];
+};
+
+static int i2c_demux_master_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
+{
+	struct i2c_demux_pinctrl_priv *priv = adap->algo_data;
+	struct i2c_adapter *parent = priv->chan[priv->cur_chan].parent_adap;
+
+	return __i2c_transfer(parent, msgs, num);
+}
+
+static u32 i2c_demux_functionality(struct i2c_adapter *adap)
+{
+	struct i2c_demux_pinctrl_priv *priv = adap->algo_data;
+	struct i2c_adapter *parent = priv->chan[priv->cur_chan].parent_adap;
+
+	return parent->algo->functionality(parent);
+}
+
+static int i2c_demux_activate_master(struct i2c_demux_pinctrl_priv *priv, u32 new_chan)
+{
+	struct i2c_adapter *adap;
+	struct pinctrl *p;
+	int ret;
+
+	ret = of_changeset_apply(&priv->chan[new_chan].chgset);
+	if (ret)
+		goto err;
+
+	adap = of_get_i2c_adapter_by_node(priv->chan[new_chan].parent_np);
+	if (!adap) {
+		ret = -ENODEV;
+		goto err_with_revert;
+	}
+
+	/*
+	 * Check if there are pinctrl states at all. Note: we cant' use
+	 * devm_pinctrl_get_select() because we need to distinguish between
+	 * the -ENODEV from devm_pinctrl_get() and pinctrl_lookup_state().
+	 */
+	p = devm_pinctrl_get(adap->dev.parent);
+	if (IS_ERR(p)) {
+		ret = PTR_ERR(p);
+		/* continue if just no pinctrl states (e.g. i2c-gpio), otherwise exit */
+		if (ret != -ENODEV)
+			goto err_with_put;
+	} else {
+		/* there are states. check and use them */
+		struct pinctrl_state *s = pinctrl_lookup_state(p, priv->bus_name);
+
+		if (IS_ERR(s)) {
+			ret = PTR_ERR(s);
+			goto err_with_put;
+		}
+		ret = pinctrl_select_state(p, s);
+		if (ret < 0)
+			goto err_with_put;
+	}
+
+	priv->chan[new_chan].parent_adap = adap;
+	priv->cur_chan = new_chan;
+
+	/* Now fill out current adapter structure. cur_chan must be up to date */
+	priv->algo.master_xfer = i2c_demux_master_xfer;
+	if (adap->algo->master_xfer_atomic)
+		priv->algo.master_xfer_atomic = i2c_demux_master_xfer;
+	priv->algo.functionality = i2c_demux_functionality;
+
+	snprintf(priv->cur_adap.name, sizeof(priv->cur_adap.name),
+		 "i2c-demux (master i2c-%d)", i2c_adapter_id(adap));
+	priv->cur_adap.owner = THIS_MODULE;
+	priv->cur_adap.algo = &priv->algo;
+	priv->cur_adap.algo_data = priv;
+	priv->cur_adap.dev.parent = &adap->dev;
+	priv->cur_adap.class = adap->class;
+	priv->cur_adap.retries = adap->retries;
+	priv->cur_adap.timeout = adap->timeout;
+	priv->cur_adap.quirks = adap->quirks;
+	priv->cur_adap.dev.of_node = priv->dev->of_node;
+	ret = i2c_add_adapter(&priv->cur_adap);
+	if (ret < 0)
+		goto err_with_put;
+
+	return 0;
+
+ err_with_put:
+	i2c_put_adapter(adap);
+ err_with_revert:
+	of_changeset_revert(&priv->chan[new_chan].chgset);
+ err:
+	dev_err(priv->dev, "failed to setup demux-adapter %d (%d)\n", new_chan, ret);
+	priv->cur_chan = -EINVAL;
+	return ret;
+}
+
+static int i2c_demux_deactivate_master(struct i2c_demux_pinctrl_priv *priv)
+{
+	int ret, cur = priv->cur_chan;
+
+	if (cur < 0)
+		return 0;
+
+	i2c_del_adapter(&priv->cur_adap);
+	i2c_put_adapter(priv->chan[cur].parent_adap);
+
+	ret = of_changeset_revert(&priv->chan[cur].chgset);
+
+	priv->chan[cur].parent_adap = NULL;
+	priv->cur_chan = -EINVAL;
+
+	return ret;
+}
+
+static int i2c_demux_change_master(struct i2c_demux_pinctrl_priv *priv, u32 new_chan)
+{
+	int ret;
+
+	if (new_chan == priv->cur_chan)
+		return 0;
+
+	ret = i2c_demux_deactivate_master(priv);
+	if (ret)
+		return ret;
+
+	return i2c_demux_activate_master(priv, new_chan);
+}
+
+static ssize_t available_masters_show(struct device *dev,
+				      struct device_attribute *attr,
+				      char *buf)
+{
+	struct i2c_demux_pinctrl_priv *priv = dev_get_drvdata(dev);
+	int count = 0, i;
+
+	for (i = 0; i < priv->num_chan && count < PAGE_SIZE; i++)
+		count += scnprintf(buf + count, PAGE_SIZE - count, "%d:%pOF%c",
+				   i, priv->chan[i].parent_np,
+				   i == priv->num_chan - 1 ? '\n' : ' ');
+
+	return count;
+}
+static DEVICE_ATTR_RO(available_masters);
+
+static ssize_t current_master_show(struct device *dev,
+				   struct device_attribute *attr,
+				   char *buf)
+{
+	struct i2c_demux_pinctrl_priv *priv = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n", priv->cur_chan);
+}
+
+static ssize_t current_master_store(struct device *dev,
+				    struct device_attribute *attr,
+				    const char *buf, size_t count)
+{
+	struct i2c_demux_pinctrl_priv *priv = dev_get_drvdata(dev);
+	unsigned int val;
+	int ret;
+
+	ret = kstrtouint(buf, 0, &val);
+	if (ret < 0)
+		return ret;
+
+	if (val >= priv->num_chan)
+		return -EINVAL;
+
+	ret = i2c_demux_change_master(priv, val);
+
+	return ret < 0 ? ret : count;
+}
+static DEVICE_ATTR_RW(current_master);
+
+static int i2c_demux_pinctrl_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct i2c_demux_pinctrl_priv *priv;
+	struct property *props;
+	int num_chan, i, j, err;
+
+	num_chan = of_count_phandle_with_args(np, "i2c-parent", NULL);
+	if (num_chan < 2) {
+		dev_err(&pdev->dev, "Need at least two I2C masters to switch\n");
+		return -EINVAL;
+	}
+
+	priv = devm_kzalloc(&pdev->dev, struct_size(priv, chan, num_chan),
+			    GFP_KERNEL);
+
+	props = devm_kcalloc(&pdev->dev, num_chan, sizeof(*props), GFP_KERNEL);
+
+	if (!priv || !props)
+		return -ENOMEM;
+
+	err = of_property_read_string(np, "i2c-bus-name", &priv->bus_name);
+	if (err)
+		return err;
+
+	for (i = 0; i < num_chan; i++) {
+		struct device_node *adap_np;
+
+		adap_np = of_parse_phandle(np, "i2c-parent", i);
+		if (!adap_np) {
+			dev_err(&pdev->dev, "can't get phandle for parent %d\n", i);
+			err = -ENOENT;
+			goto err_rollback;
+		}
+		priv->chan[i].parent_np = adap_np;
+
+		props[i].name = devm_kstrdup(&pdev->dev, "status", GFP_KERNEL);
+		props[i].value = devm_kstrdup(&pdev->dev, "ok", GFP_KERNEL);
+		if (!props[i].name || !props[i].value) {
+			err = -ENOMEM;
+			goto err_rollback;
+		}
+		props[i].length = 3;
+
+		of_changeset_init(&priv->chan[i].chgset);
+		of_changeset_update_property(&priv->chan[i].chgset, adap_np, &props[i]);
+	}
+
+	priv->num_chan = num_chan;
+	priv->dev = &pdev->dev;
+
+	platform_set_drvdata(pdev, priv);
+
+	pm_runtime_no_callbacks(&pdev->dev);
+
+	/* switch to first parent as active master */
+	i2c_demux_activate_master(priv, 0);
+
+	err = device_create_file(&pdev->dev, &dev_attr_available_masters);
+	if (err)
+		goto err_rollback_activation;
+
+	err = device_create_file(&pdev->dev, &dev_attr_current_master);
+	if (err)
+		goto err_rollback_available;
+
+	return 0;
+
+err_rollback_available:
+	device_remove_file(&pdev->dev, &dev_attr_available_masters);
+err_rollback_activation:
+	i2c_demux_deactivate_master(priv);
+err_rollback:
+	for (j = 0; j < i; j++) {
+		of_node_put(priv->chan[j].parent_np);
+		of_changeset_destroy(&priv->chan[j].chgset);
+	}
+
+	return err;
+}
+
+static int i2c_demux_pinctrl_remove(struct platform_device *pdev)
+{
+	struct i2c_demux_pinctrl_priv *priv = platform_get_drvdata(pdev);
+	int i;
+
+	device_remove_file(&pdev->dev, &dev_attr_current_master);
+	device_remove_file(&pdev->dev, &dev_attr_available_masters);
+
+	i2c_demux_deactivate_master(priv);
+
+	for (i = 0; i < priv->num_chan; i++) {
+		of_node_put(priv->chan[i].parent_np);
+		of_changeset_destroy(&priv->chan[i].chgset);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id i2c_demux_pinctrl_of_match[] = {
+	{ .compatible = "i2c-demux-pinctrl", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, i2c_demux_pinctrl_of_match);
+
+static struct platform_driver i2c_demux_pinctrl_driver = {
+	.driver	= {
+		.name = "i2c-demux-pinctrl",
+		.of_match_table = i2c_demux_pinctrl_of_match,
+	},
+	.probe	= i2c_demux_pinctrl_probe,
+	.remove	= i2c_demux_pinctrl_remove,
+};
+module_platform_driver(i2c_demux_pinctrl_driver);
+
+MODULE_DESCRIPTION("pinctrl-based I2C demux driver");
+MODULE_AUTHOR("Wolfram Sang <wsa@sang-engineering.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:i2c-demux-pinctrl");
diff --git a/drivers/i2c/muxes/i2c-mux-gpio.c b/drivers/i2c/muxes/i2c-mux-gpio.c
new file mode 100644
index 000000000..0930a51c8
--- /dev/null
+++ b/drivers/i2c/muxes/i2c-mux-gpio.c
@@ -0,0 +1,260 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * I2C multiplexer using GPIO API
+ *
+ * Peter Korsgaard <peter.korsgaard@barco.com>
+ */
+
+#include <linux/i2c.h>
+#include <linux/i2c-mux.h>
+#include <linux/overflow.h>
+#include <linux/platform_data/i2c-mux-gpio.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/bits.h>
+#include <linux/gpio/consumer.h>
+/* FIXME: stop poking around inside gpiolib */
+#include "../../gpio/gpiolib.h"
+
+struct gpiomux {
+	struct i2c_mux_gpio_platform_data data;
+	int ngpios;
+	struct gpio_desc **gpios;
+};
+
+static void i2c_mux_gpio_set(const struct gpiomux *mux, unsigned val)
+{
+	DECLARE_BITMAP(values, BITS_PER_TYPE(val));
+
+	values[0] = val;
+
+	gpiod_set_array_value_cansleep(mux->ngpios, mux->gpios, NULL, values);
+}
+
+static int i2c_mux_gpio_select(struct i2c_mux_core *muxc, u32 chan)
+{
+	struct gpiomux *mux = i2c_mux_priv(muxc);
+
+	i2c_mux_gpio_set(mux, chan);
+
+	return 0;
+}
+
+static int i2c_mux_gpio_deselect(struct i2c_mux_core *muxc, u32 chan)
+{
+	struct gpiomux *mux = i2c_mux_priv(muxc);
+
+	i2c_mux_gpio_set(mux, mux->data.idle);
+
+	return 0;
+}
+
+static int i2c_mux_gpio_probe_fw(struct gpiomux *mux,
+				 struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct fwnode_handle *fwnode = dev_fwnode(dev);
+	struct device_node *np = dev->of_node;
+	struct device_node *adapter_np;
+	struct i2c_adapter *adapter = NULL;
+	struct fwnode_handle *child;
+	unsigned *values;
+	int rc, i = 0;
+
+	if (is_of_node(fwnode)) {
+		if (!np)
+			return -ENODEV;
+
+		adapter_np = of_parse_phandle(np, "i2c-parent", 0);
+		if (!adapter_np) {
+			dev_err(&pdev->dev, "Cannot parse i2c-parent\n");
+			return -ENODEV;
+		}
+		adapter = of_find_i2c_adapter_by_node(adapter_np);
+		of_node_put(adapter_np);
+
+	} else if (is_acpi_node(fwnode)) {
+		/*
+		 * In ACPI land the mux should be a direct child of the i2c
+		 * bus it muxes.
+		 */
+		acpi_handle dev_handle = ACPI_HANDLE(dev->parent);
+
+		adapter = i2c_acpi_find_adapter_by_handle(dev_handle);
+	}
+
+	if (!adapter)
+		return -EPROBE_DEFER;
+
+	mux->data.parent = i2c_adapter_id(adapter);
+	put_device(&adapter->dev);
+
+	mux->data.n_values = device_get_child_node_count(dev);
+	values = devm_kcalloc(dev,
+			      mux->data.n_values, sizeof(*mux->data.values),
+			      GFP_KERNEL);
+	if (!values) {
+		dev_err(dev, "Cannot allocate values array");
+		return -ENOMEM;
+	}
+
+	device_for_each_child_node(dev, child) {
+		if (is_of_node(child)) {
+			fwnode_property_read_u32(child, "reg", values + i);
+
+		} else if (is_acpi_node(child)) {
+			rc = acpi_get_local_address(ACPI_HANDLE_FWNODE(child), values + i);
+			if (rc) {
+				fwnode_handle_put(child);
+				return dev_err_probe(dev, rc, "Cannot get address\n");
+			}
+		}
+
+		i++;
+	}
+	mux->data.values = values;
+
+	if (device_property_read_u32(dev, "idle-state", &mux->data.idle))
+		mux->data.idle = I2C_MUX_GPIO_NO_IDLE;
+
+	return 0;
+}
+
+static int i2c_mux_gpio_probe(struct platform_device *pdev)
+{
+	struct i2c_mux_core *muxc;
+	struct gpiomux *mux;
+	struct i2c_adapter *parent;
+	struct i2c_adapter *root;
+	unsigned initial_state;
+	int i, ngpios, ret;
+
+	mux = devm_kzalloc(&pdev->dev, sizeof(*mux), GFP_KERNEL);
+	if (!mux)
+		return -ENOMEM;
+
+	if (!dev_get_platdata(&pdev->dev)) {
+		ret = i2c_mux_gpio_probe_fw(mux, pdev);
+		if (ret < 0)
+			return ret;
+	} else {
+		memcpy(&mux->data, dev_get_platdata(&pdev->dev),
+			sizeof(mux->data));
+	}
+
+	ngpios = gpiod_count(&pdev->dev, "mux");
+	if (ngpios <= 0) {
+		dev_err(&pdev->dev, "no valid gpios provided\n");
+		return ngpios ?: -EINVAL;
+	}
+	mux->ngpios = ngpios;
+
+	parent = i2c_get_adapter(mux->data.parent);
+	if (!parent)
+		return -EPROBE_DEFER;
+
+	muxc = i2c_mux_alloc(parent, &pdev->dev, mux->data.n_values,
+			     array_size(ngpios, sizeof(*mux->gpios)), 0,
+			     i2c_mux_gpio_select, NULL);
+	if (!muxc) {
+		ret = -ENOMEM;
+		goto alloc_failed;
+	}
+	mux->gpios = muxc->priv;
+	muxc->priv = mux;
+
+	platform_set_drvdata(pdev, muxc);
+
+	root = i2c_root_adapter(&parent->dev);
+
+	muxc->mux_locked = true;
+
+	if (mux->data.idle != I2C_MUX_GPIO_NO_IDLE) {
+		initial_state = mux->data.idle;
+		muxc->deselect = i2c_mux_gpio_deselect;
+	} else {
+		initial_state = mux->data.values[0];
+	}
+
+	for (i = 0; i < ngpios; i++) {
+		struct device *gpio_dev;
+		struct gpio_desc *gpiod;
+		enum gpiod_flags flag;
+
+		if (initial_state & BIT(i))
+			flag = GPIOD_OUT_HIGH;
+		else
+			flag = GPIOD_OUT_LOW;
+		gpiod = devm_gpiod_get_index(&pdev->dev, "mux", i, flag);
+		if (IS_ERR(gpiod)) {
+			ret = PTR_ERR(gpiod);
+			goto alloc_failed;
+		}
+
+		mux->gpios[i] = gpiod;
+
+		if (!muxc->mux_locked)
+			continue;
+
+		/* FIXME: find a proper way to access the GPIO device */
+		gpio_dev = &gpiod->gdev->dev;
+		muxc->mux_locked = i2c_root_adapter(gpio_dev) == root;
+	}
+
+	if (muxc->mux_locked)
+		dev_info(&pdev->dev, "mux-locked i2c mux\n");
+
+	for (i = 0; i < mux->data.n_values; i++) {
+		u32 nr = mux->data.base_nr ? (mux->data.base_nr + i) : 0;
+		unsigned int class = mux->data.classes ? mux->data.classes[i] : 0;
+
+		ret = i2c_mux_add_adapter(muxc, nr, mux->data.values[i], class);
+		if (ret)
+			goto add_adapter_failed;
+	}
+
+	dev_info(&pdev->dev, "%d port mux on %s adapter\n",
+		 mux->data.n_values, parent->name);
+
+	return 0;
+
+add_adapter_failed:
+	i2c_mux_del_adapters(muxc);
+alloc_failed:
+	i2c_put_adapter(parent);
+
+	return ret;
+}
+
+static int i2c_mux_gpio_remove(struct platform_device *pdev)
+{
+	struct i2c_mux_core *muxc = platform_get_drvdata(pdev);
+
+	i2c_mux_del_adapters(muxc);
+	i2c_put_adapter(muxc->parent);
+
+	return 0;
+}
+
+static const struct of_device_id i2c_mux_gpio_of_match[] = {
+	{ .compatible = "i2c-mux-gpio", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, i2c_mux_gpio_of_match);
+
+static struct platform_driver i2c_mux_gpio_driver = {
+	.probe	= i2c_mux_gpio_probe,
+	.remove	= i2c_mux_gpio_remove,
+	.driver	= {
+		.name	= "i2c-mux-gpio",
+		.of_match_table = i2c_mux_gpio_of_match,
+	},
+};
+
+module_platform_driver(i2c_mux_gpio_driver);
+
+MODULE_DESCRIPTION("GPIO-based I2C multiplexer driver");
+MODULE_AUTHOR("Peter Korsgaard <peter.korsgaard@barco.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:i2c-mux-gpio");
diff --git a/drivers/i2c/muxes/i2c-mux-gpmux.c b/drivers/i2c/muxes/i2c-mux-gpmux.c
new file mode 100644
index 000000000..0ebc12575
--- /dev/null
+++ b/drivers/i2c/muxes/i2c-mux-gpmux.c
@@ -0,0 +1,167 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * General Purpose I2C multiplexer
+ *
+ * Copyright (C) 2017 Axentia Technologies AB
+ *
+ * Author: Peter Rosin <peda@axentia.se>
+ */
+
+#include <linux/i2c.h>
+#include <linux/i2c-mux.h>
+#include <linux/module.h>
+#include <linux/mux/consumer.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+struct mux {
+	struct mux_control *control;
+
+	bool do_not_deselect;
+};
+
+static int i2c_mux_select(struct i2c_mux_core *muxc, u32 chan)
+{
+	struct mux *mux = i2c_mux_priv(muxc);
+	int ret;
+
+	ret = mux_control_select(mux->control, chan);
+	mux->do_not_deselect = ret < 0;
+
+	return ret;
+}
+
+static int i2c_mux_deselect(struct i2c_mux_core *muxc, u32 chan)
+{
+	struct mux *mux = i2c_mux_priv(muxc);
+
+	if (mux->do_not_deselect)
+		return 0;
+
+	return mux_control_deselect(mux->control);
+}
+
+static struct i2c_adapter *mux_parent_adapter(struct device *dev)
+{
+	struct device_node *np = dev->of_node;
+	struct device_node *parent_np;
+	struct i2c_adapter *parent;
+
+	parent_np = of_parse_phandle(np, "i2c-parent", 0);
+	if (!parent_np) {
+		dev_err(dev, "Cannot parse i2c-parent\n");
+		return ERR_PTR(-ENODEV);
+	}
+	parent = of_get_i2c_adapter_by_node(parent_np);
+	of_node_put(parent_np);
+	if (!parent)
+		return ERR_PTR(-EPROBE_DEFER);
+
+	return parent;
+}
+
+static const struct of_device_id i2c_mux_of_match[] = {
+	{ .compatible = "i2c-mux", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, i2c_mux_of_match);
+
+static int i2c_mux_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct device_node *child;
+	struct i2c_mux_core *muxc;
+	struct mux *mux;
+	struct i2c_adapter *parent;
+	int children;
+	int ret;
+
+	if (!np)
+		return -ENODEV;
+
+	mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
+	if (!mux)
+		return -ENOMEM;
+
+	mux->control = devm_mux_control_get(dev, NULL);
+	if (IS_ERR(mux->control))
+		return dev_err_probe(dev, PTR_ERR(mux->control),
+				     "failed to get control-mux\n");
+
+	parent = mux_parent_adapter(dev);
+	if (IS_ERR(parent))
+		return dev_err_probe(dev, PTR_ERR(parent),
+				     "failed to get i2c-parent adapter\n");
+
+	children = of_get_child_count(np);
+
+	muxc = i2c_mux_alloc(parent, dev, children, 0, 0,
+			     i2c_mux_select, i2c_mux_deselect);
+	if (!muxc) {
+		ret = -ENOMEM;
+		goto err_parent;
+	}
+	muxc->priv = mux;
+
+	platform_set_drvdata(pdev, muxc);
+
+	muxc->mux_locked = of_property_read_bool(np, "mux-locked");
+
+	for_each_child_of_node(np, child) {
+		u32 chan;
+
+		ret = of_property_read_u32(child, "reg", &chan);
+		if (ret < 0) {
+			dev_err(dev, "no reg property for node '%pOFn'\n",
+				child);
+			goto err_children;
+		}
+
+		if (chan >= mux_control_states(mux->control)) {
+			dev_err(dev, "invalid reg %u\n", chan);
+			ret = -EINVAL;
+			goto err_children;
+		}
+
+		ret = i2c_mux_add_adapter(muxc, 0, chan, 0);
+		if (ret)
+			goto err_children;
+	}
+
+	dev_info(dev, "%d-port mux on %s adapter\n", children, parent->name);
+
+	return 0;
+
+err_children:
+	of_node_put(child);
+	i2c_mux_del_adapters(muxc);
+err_parent:
+	i2c_put_adapter(parent);
+
+	return ret;
+}
+
+static int i2c_mux_remove(struct platform_device *pdev)
+{
+	struct i2c_mux_core *muxc = platform_get_drvdata(pdev);
+
+	i2c_mux_del_adapters(muxc);
+	i2c_put_adapter(muxc->parent);
+
+	return 0;
+}
+
+static struct platform_driver i2c_mux_driver = {
+	.probe	= i2c_mux_probe,
+	.remove	= i2c_mux_remove,
+	.driver	= {
+		.name	= "i2c-mux-gpmux",
+		.of_match_table = i2c_mux_of_match,
+	},
+};
+module_platform_driver(i2c_mux_driver);
+
+MODULE_DESCRIPTION("General Purpose I2C multiplexer driver");
+MODULE_AUTHOR("Peter Rosin <peda@axentia.se>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/i2c/muxes/i2c-mux-ltc4306.c b/drivers/i2c/muxes/i2c-mux-ltc4306.c
new file mode 100644
index 000000000..708358250
--- /dev/null
+++ b/drivers/i2c/muxes/i2c-mux-ltc4306.c
@@ -0,0 +1,318 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Linear Technology LTC4306 and LTC4305 I2C multiplexer/switch
+ *
+ * Copyright (C) 2017 Analog Devices Inc.
+ *
+ * Based on: i2c-mux-pca954x.c
+ *
+ * Datasheet: http://cds.linear.com/docs/en/datasheet/4306.pdf
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/driver.h>
+#include <linux/i2c-mux.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define LTC4305_MAX_NCHANS 2
+#define LTC4306_MAX_NCHANS 4
+
+#define LTC_REG_STATUS	0x0
+#define LTC_REG_CONFIG	0x1
+#define LTC_REG_MODE	0x2
+#define LTC_REG_SWITCH	0x3
+
+#define LTC_DOWNSTREAM_ACCL_EN	BIT(6)
+#define LTC_UPSTREAM_ACCL_EN	BIT(7)
+
+#define LTC_GPIO_ALL_INPUT	0xC0
+#define LTC_SWITCH_MASK		0xF0
+
+enum ltc_type {
+	ltc_4305,
+	ltc_4306,
+};
+
+struct chip_desc {
+	u8 nchans;
+	u8 num_gpios;
+};
+
+struct ltc4306 {
+	struct regmap *regmap;
+	struct gpio_chip gpiochip;
+	const struct chip_desc *chip;
+};
+
+static const struct chip_desc chips[] = {
+	[ltc_4305] = {
+		.nchans = LTC4305_MAX_NCHANS,
+	},
+	[ltc_4306] = {
+		.nchans = LTC4306_MAX_NCHANS,
+		.num_gpios = 2,
+	},
+};
+
+static bool ltc4306_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	return (reg == LTC_REG_CONFIG) ? true : false;
+}
+
+static const struct regmap_config ltc4306_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = LTC_REG_SWITCH,
+	.volatile_reg = ltc4306_is_volatile_reg,
+	.cache_type = REGCACHE_FLAT,
+};
+
+static int ltc4306_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct ltc4306 *data = gpiochip_get_data(chip);
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(data->regmap, LTC_REG_CONFIG, &val);
+	if (ret < 0)
+		return ret;
+
+	return !!(val & BIT(1 - offset));
+}
+
+static void ltc4306_gpio_set(struct gpio_chip *chip, unsigned int offset,
+			     int value)
+{
+	struct ltc4306 *data = gpiochip_get_data(chip);
+
+	regmap_update_bits(data->regmap, LTC_REG_CONFIG, BIT(5 - offset),
+			   value ? BIT(5 - offset) : 0);
+}
+
+static int ltc4306_gpio_get_direction(struct gpio_chip *chip,
+				      unsigned int offset)
+{
+	struct ltc4306 *data = gpiochip_get_data(chip);
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(data->regmap, LTC_REG_MODE, &val);
+	if (ret < 0)
+		return ret;
+
+	return !!(val & BIT(7 - offset));
+}
+
+static int ltc4306_gpio_direction_input(struct gpio_chip *chip,
+					unsigned int offset)
+{
+	struct ltc4306 *data = gpiochip_get_data(chip);
+
+	return regmap_update_bits(data->regmap, LTC_REG_MODE,
+				  BIT(7 - offset), BIT(7 - offset));
+}
+
+static int ltc4306_gpio_direction_output(struct gpio_chip *chip,
+					 unsigned int offset, int value)
+{
+	struct ltc4306 *data = gpiochip_get_data(chip);
+
+	ltc4306_gpio_set(chip, offset, value);
+	return regmap_update_bits(data->regmap, LTC_REG_MODE,
+				  BIT(7 - offset), 0);
+}
+
+static int ltc4306_gpio_set_config(struct gpio_chip *chip,
+				   unsigned int offset, unsigned long config)
+{
+	struct ltc4306 *data = gpiochip_get_data(chip);
+	unsigned int val;
+
+	switch (pinconf_to_config_param(config)) {
+	case PIN_CONFIG_DRIVE_OPEN_DRAIN:
+		val = 0;
+		break;
+	case PIN_CONFIG_DRIVE_PUSH_PULL:
+		val = BIT(4 - offset);
+		break;
+	default:
+		return -ENOTSUPP;
+	}
+
+	return regmap_update_bits(data->regmap, LTC_REG_MODE,
+				  BIT(4 - offset), val);
+}
+
+static int ltc4306_gpio_init(struct ltc4306 *data)
+{
+	struct device *dev = regmap_get_device(data->regmap);
+
+	if (!data->chip->num_gpios)
+		return 0;
+
+	data->gpiochip.label = dev_name(dev);
+	data->gpiochip.base = -1;
+	data->gpiochip.ngpio = data->chip->num_gpios;
+	data->gpiochip.parent = dev;
+	data->gpiochip.can_sleep = true;
+	data->gpiochip.get_direction = ltc4306_gpio_get_direction;
+	data->gpiochip.direction_input = ltc4306_gpio_direction_input;
+	data->gpiochip.direction_output = ltc4306_gpio_direction_output;
+	data->gpiochip.get = ltc4306_gpio_get;
+	data->gpiochip.set = ltc4306_gpio_set;
+	data->gpiochip.set_config = ltc4306_gpio_set_config;
+	data->gpiochip.owner = THIS_MODULE;
+
+	/* gpiolib assumes all GPIOs default input */
+	regmap_write(data->regmap, LTC_REG_MODE, LTC_GPIO_ALL_INPUT);
+
+	return devm_gpiochip_add_data(dev, &data->gpiochip, data);
+}
+
+static int ltc4306_select_mux(struct i2c_mux_core *muxc, u32 chan)
+{
+	struct ltc4306 *data = i2c_mux_priv(muxc);
+
+	return regmap_update_bits(data->regmap, LTC_REG_SWITCH,
+				  LTC_SWITCH_MASK, BIT(7 - chan));
+}
+
+static int ltc4306_deselect_mux(struct i2c_mux_core *muxc, u32 chan)
+{
+	struct ltc4306 *data = i2c_mux_priv(muxc);
+
+	return regmap_update_bits(data->regmap, LTC_REG_SWITCH,
+				  LTC_SWITCH_MASK, 0);
+}
+
+static const struct i2c_device_id ltc4306_id[] = {
+	{ "ltc4305", ltc_4305 },
+	{ "ltc4306", ltc_4306 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ltc4306_id);
+
+static const struct of_device_id ltc4306_of_match[] = {
+	{ .compatible = "lltc,ltc4305", .data = &chips[ltc_4305] },
+	{ .compatible = "lltc,ltc4306", .data = &chips[ltc_4306] },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ltc4306_of_match);
+
+static int ltc4306_probe(struct i2c_client *client)
+{
+	struct i2c_adapter *adap = client->adapter;
+	const struct chip_desc *chip;
+	struct i2c_mux_core *muxc;
+	struct ltc4306 *data;
+	struct gpio_desc *gpio;
+	bool idle_disc;
+	unsigned int val = 0;
+	int num, ret;
+
+	chip = of_device_get_match_data(&client->dev);
+
+	if (!chip)
+		chip = &chips[i2c_match_id(ltc4306_id, client)->driver_data];
+
+	idle_disc = device_property_read_bool(&client->dev,
+					      "i2c-mux-idle-disconnect");
+
+	muxc = i2c_mux_alloc(adap, &client->dev,
+			     chip->nchans, sizeof(*data),
+			     I2C_MUX_LOCKED, ltc4306_select_mux,
+			     idle_disc ? ltc4306_deselect_mux : NULL);
+	if (!muxc)
+		return -ENOMEM;
+	data = i2c_mux_priv(muxc);
+	data->chip = chip;
+
+	i2c_set_clientdata(client, muxc);
+
+	data->regmap = devm_regmap_init_i2c(client, &ltc4306_regmap_config);
+	if (IS_ERR(data->regmap)) {
+		ret = PTR_ERR(data->regmap);
+		dev_err(&client->dev, "Failed to allocate register map: %d\n",
+			ret);
+		return ret;
+	}
+
+	/* Reset and enable the mux if an enable GPIO is specified. */
+	gpio = devm_gpiod_get_optional(&client->dev, "enable", GPIOD_OUT_LOW);
+	if (IS_ERR(gpio))
+		return PTR_ERR(gpio);
+
+	if (gpio) {
+		udelay(1);
+		gpiod_set_value(gpio, 1);
+	}
+
+	/*
+	 * Write the mux register at addr to verify
+	 * that the mux is in fact present. This also
+	 * initializes the mux to disconnected state.
+	 */
+	if (regmap_write(data->regmap, LTC_REG_SWITCH, 0) < 0) {
+		dev_warn(&client->dev, "probe failed\n");
+		return -ENODEV;
+	}
+
+	if (device_property_read_bool(&client->dev,
+				      "ltc,downstream-accelerators-enable"))
+		val |= LTC_DOWNSTREAM_ACCL_EN;
+
+	if (device_property_read_bool(&client->dev,
+				      "ltc,upstream-accelerators-enable"))
+		val |= LTC_UPSTREAM_ACCL_EN;
+
+	if (regmap_write(data->regmap, LTC_REG_CONFIG, val) < 0)
+		return -ENODEV;
+
+	ret = ltc4306_gpio_init(data);
+	if (ret < 0)
+		return ret;
+
+	/* Now create an adapter for each channel */
+	for (num = 0; num < chip->nchans; num++) {
+		ret = i2c_mux_add_adapter(muxc, 0, num, 0);
+		if (ret) {
+			i2c_mux_del_adapters(muxc);
+			return ret;
+		}
+	}
+
+	dev_info(&client->dev,
+		 "registered %d multiplexed busses for I2C switch %s\n",
+		 num, client->name);
+
+	return 0;
+}
+
+static void ltc4306_remove(struct i2c_client *client)
+{
+	struct i2c_mux_core *muxc = i2c_get_clientdata(client);
+
+	i2c_mux_del_adapters(muxc);
+}
+
+static struct i2c_driver ltc4306_driver = {
+	.driver		= {
+		.name	= "ltc4306",
+		.of_match_table = of_match_ptr(ltc4306_of_match),
+	},
+	.probe_new	= ltc4306_probe,
+	.remove		= ltc4306_remove,
+	.id_table	= ltc4306_id,
+};
+
+module_i2c_driver(ltc4306_driver);
+
+MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
+MODULE_DESCRIPTION("Linear Technology LTC4306, LTC4305 I2C mux/switch driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/i2c/muxes/i2c-mux-mlxcpld.c b/drivers/i2c/muxes/i2c-mux-mlxcpld.c
new file mode 100644
index 000000000..1a879f6a3
--- /dev/null
+++ b/drivers/i2c/muxes/i2c-mux-mlxcpld.c
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
+/*
+ * Mellanox i2c mux driver
+ *
+ * Copyright (C) 2016-2020 Mellanox Technologies
+ */
+
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/i2c-mux.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_data/mlxcpld.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+/* mlxcpld_mux - mux control structure:
+ * @last_val - last selected register value or -1 if mux deselected
+ * @client - I2C device client
+ * @pdata: platform data
+ */
+struct mlxcpld_mux {
+	int last_val;
+	struct i2c_client *client;
+	struct mlxcpld_mux_plat_data pdata;
+};
+
+/* MUX logic description.
+ * Driver can support different mux control logic, according to CPLD
+ * implementation.
+ *
+ * Connectivity schema.
+ *
+ * i2c-mlxcpld                                 Digital               Analog
+ * driver
+ * *--------*                                 * -> mux1 (virt bus2) -> mux -> |
+ * | I2CLPC | i2c physical                    * -> mux2 (virt bus3) -> mux -> |
+ * | bridge | bus 1                 *---------*                               |
+ * | logic  |---------------------> * mux reg *                               |
+ * | in CPLD|                       *---------*                               |
+ * *--------*   i2c-mux-mlxpcld          ^    * -> muxn (virt busn) -> mux -> |
+ *     |        driver                   |                                    |
+ *     |        *---------------*        |                              Devices
+ *     |        * CPLD (i2c bus)* select |
+ *     |        * registers for *--------*
+ *     |        * mux selection * deselect
+ *     |        *---------------*
+ *     |                 |
+ * <-------->     <----------->
+ * i2c cntrl      Board cntrl reg
+ * reg space      space (mux select,
+ *                IO, LED, WD, info)
+ *
+ */
+
+/* Write to mux register. Don't use i2c_transfer() and i2c_smbus_xfer()
+ * for this as they will try to lock adapter a second time.
+ */
+static int mlxcpld_mux_reg_write(struct i2c_adapter *adap,
+				 struct mlxcpld_mux *mux, u32 val)
+{
+	struct i2c_client *client = mux->client;
+	union i2c_smbus_data data;
+	struct i2c_msg msg;
+	u8 buf[3];
+
+	switch (mux->pdata.reg_size) {
+	case 1:
+		data.byte = val;
+		return __i2c_smbus_xfer(adap, client->addr, client->flags,
+					I2C_SMBUS_WRITE, mux->pdata.sel_reg_addr,
+					I2C_SMBUS_BYTE_DATA, &data);
+	case 2:
+		buf[0] = mux->pdata.sel_reg_addr >> 8;
+		buf[1] = mux->pdata.sel_reg_addr;
+		buf[2] = val;
+		msg.addr = client->addr;
+		msg.buf = buf;
+		msg.len = mux->pdata.reg_size + 1;
+		msg.flags = 0;
+		return __i2c_transfer(adap, &msg, 1);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int mlxcpld_mux_select_chan(struct i2c_mux_core *muxc, u32 chan)
+{
+	struct mlxcpld_mux *mux = i2c_mux_priv(muxc);
+	u32 regval = chan;
+	int err = 0;
+
+	if (mux->pdata.reg_size == 1)
+		regval += 1;
+
+	/* Only select the channel if its different from the last channel */
+	if (mux->last_val != regval) {
+		err = mlxcpld_mux_reg_write(muxc->parent, mux, regval);
+		mux->last_val = err < 0 ? -1 : regval;
+	}
+
+	return err;
+}
+
+static int mlxcpld_mux_deselect(struct i2c_mux_core *muxc, u32 chan)
+{
+	struct mlxcpld_mux *mux = i2c_mux_priv(muxc);
+
+	/* Deselect active channel */
+	mux->last_val = -1;
+
+	return mlxcpld_mux_reg_write(muxc->parent, mux, 0);
+}
+
+/* Probe/reomove functions */
+static int mlxcpld_mux_probe(struct platform_device *pdev)
+{
+	struct mlxcpld_mux_plat_data *pdata = dev_get_platdata(&pdev->dev);
+	struct i2c_client *client = to_i2c_client(pdev->dev.parent);
+	struct i2c_mux_core *muxc;
+	struct mlxcpld_mux *data;
+	int num, err;
+	u32 func;
+
+	if (!pdata)
+		return -EINVAL;
+
+	switch (pdata->reg_size) {
+	case 1:
+		func = I2C_FUNC_SMBUS_WRITE_BYTE_DATA;
+		break;
+	case 2:
+		func = I2C_FUNC_I2C;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (!i2c_check_functionality(client->adapter, func))
+		return -ENODEV;
+
+	muxc = i2c_mux_alloc(client->adapter, &pdev->dev, pdata->num_adaps,
+			     sizeof(*data), 0, mlxcpld_mux_select_chan,
+			     mlxcpld_mux_deselect);
+	if (!muxc)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, muxc);
+	data = i2c_mux_priv(muxc);
+	data->client = client;
+	memcpy(&data->pdata, pdata, sizeof(*pdata));
+	data->last_val = -1; /* force the first selection */
+
+	/* Create an adapter for each channel. */
+	for (num = 0; num < pdata->num_adaps; num++) {
+		err = i2c_mux_add_adapter(muxc, 0, pdata->chan_ids[num], 0);
+		if (err)
+			goto virt_reg_failed;
+	}
+
+	/* Notify caller when all channels' adapters are created. */
+	if (pdata->completion_notify)
+		pdata->completion_notify(pdata->handle, muxc->parent, muxc->adapter);
+
+	return 0;
+
+virt_reg_failed:
+	i2c_mux_del_adapters(muxc);
+	return err;
+}
+
+static int mlxcpld_mux_remove(struct platform_device *pdev)
+{
+	struct i2c_mux_core *muxc = platform_get_drvdata(pdev);
+
+	i2c_mux_del_adapters(muxc);
+	return 0;
+}
+
+static struct platform_driver mlxcpld_mux_driver = {
+	.driver = {
+		.name = "i2c-mux-mlxcpld",
+	},
+	.probe = mlxcpld_mux_probe,
+	.remove = mlxcpld_mux_remove,
+};
+
+module_platform_driver(mlxcpld_mux_driver);
+
+MODULE_AUTHOR("Michael Shych (michaels@mellanox.com)");
+MODULE_DESCRIPTION("Mellanox I2C-CPLD-MUX driver");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_ALIAS("platform:i2c-mux-mlxcpld");
diff --git a/drivers/i2c/muxes/i2c-mux-pca9541.c b/drivers/i2c/muxes/i2c-mux-pca9541.c
new file mode 100644
index 000000000..ea83de78f
--- /dev/null
+++ b/drivers/i2c/muxes/i2c-mux-pca9541.c
@@ -0,0 +1,349 @@
+/*
+ * I2C multiplexer driver for PCA9541 bus master selector
+ *
+ * Copyright (c) 2010 Ericsson AB.
+ *
+ * Author: Guenter Roeck <linux@roeck-us.net>
+ *
+ * Derived from:
+ *  pca954x.c
+ *
+ *  Copyright (c) 2008-2009 Rodolfo Giometti <giometti@linux.it>
+ *  Copyright (c) 2008-2009 Eurotech S.p.A. <info@eurotech.it>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/i2c-mux.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+/*
+ * The PCA9541 is a bus master selector. It supports two I2C masters connected
+ * to a single slave bus.
+ *
+ * Before each bus transaction, a master has to acquire bus ownership. After the
+ * transaction is complete, bus ownership has to be released. This fits well
+ * into the I2C multiplexer framework, which provides select and release
+ * functions for this purpose. For this reason, this driver is modeled as
+ * single-channel I2C bus multiplexer.
+ *
+ * This driver assumes that the two bus masters are controlled by two different
+ * hosts. If a single host controls both masters, platform code has to ensure
+ * that only one of the masters is instantiated at any given time.
+ */
+
+#define PCA9541_CONTROL		0x01
+#define PCA9541_ISTAT		0x02
+
+#define PCA9541_CTL_MYBUS	BIT(0)
+#define PCA9541_CTL_NMYBUS	BIT(1)
+#define PCA9541_CTL_BUSON	BIT(2)
+#define PCA9541_CTL_NBUSON	BIT(3)
+#define PCA9541_CTL_BUSINIT	BIT(4)
+#define PCA9541_CTL_TESTON	BIT(6)
+#define PCA9541_CTL_NTESTON	BIT(7)
+
+#define PCA9541_ISTAT_INTIN	BIT(0)
+#define PCA9541_ISTAT_BUSINIT	BIT(1)
+#define PCA9541_ISTAT_BUSOK	BIT(2)
+#define PCA9541_ISTAT_BUSLOST	BIT(3)
+#define PCA9541_ISTAT_MYTEST	BIT(6)
+#define PCA9541_ISTAT_NMYTEST	BIT(7)
+
+#define BUSON		(PCA9541_CTL_BUSON | PCA9541_CTL_NBUSON)
+#define MYBUS		(PCA9541_CTL_MYBUS | PCA9541_CTL_NMYBUS)
+#define mybus(x)	(!((x) & MYBUS) || ((x) & MYBUS) == MYBUS)
+#define busoff(x)	(!((x) & BUSON) || ((x) & BUSON) == BUSON)
+
+/* arbitration timeouts, in jiffies */
+#define ARB_TIMEOUT	(HZ / 8)	/* 125 ms until forcing bus ownership */
+#define ARB2_TIMEOUT	(HZ / 4)	/* 250 ms until acquisition failure */
+
+/* arbitration retry delays, in us */
+#define SELECT_DELAY_SHORT	50
+#define SELECT_DELAY_LONG	1000
+
+struct pca9541 {
+	struct i2c_client *client;
+	unsigned long select_timeout;
+	unsigned long arb_timeout;
+};
+
+static const struct i2c_device_id pca9541_id[] = {
+	{"pca9541", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, pca9541_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id pca9541_of_match[] = {
+	{ .compatible = "nxp,pca9541" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, pca9541_of_match);
+#endif
+
+/*
+ * Write to chip register. Don't use i2c_transfer()/i2c_smbus_xfer()
+ * as they will try to lock the adapter a second time.
+ */
+static int pca9541_reg_write(struct i2c_client *client, u8 command, u8 val)
+{
+	struct i2c_adapter *adap = client->adapter;
+	union i2c_smbus_data data = { .byte = val };
+
+	return __i2c_smbus_xfer(adap, client->addr, client->flags,
+				I2C_SMBUS_WRITE, command,
+				I2C_SMBUS_BYTE_DATA, &data);
+}
+
+/*
+ * Read from chip register. Don't use i2c_transfer()/i2c_smbus_xfer()
+ * as they will try to lock adapter a second time.
+ */
+static int pca9541_reg_read(struct i2c_client *client, u8 command)
+{
+	struct i2c_adapter *adap = client->adapter;
+	union i2c_smbus_data data;
+	int ret;
+
+	ret = __i2c_smbus_xfer(adap, client->addr, client->flags,
+			       I2C_SMBUS_READ, command,
+			       I2C_SMBUS_BYTE_DATA, &data);
+
+	return ret ?: data.byte;
+}
+
+/*
+ * Arbitration management functions
+ */
+
+/* Release bus. Also reset NTESTON and BUSINIT if it was set. */
+static void pca9541_release_bus(struct i2c_client *client)
+{
+	int reg;
+
+	reg = pca9541_reg_read(client, PCA9541_CONTROL);
+	if (reg >= 0 && !busoff(reg) && mybus(reg))
+		pca9541_reg_write(client, PCA9541_CONTROL,
+				  (reg & PCA9541_CTL_NBUSON) >> 1);
+}
+
+/*
+ * Arbitration is defined as a two-step process. A bus master can only activate
+ * the slave bus if it owns it; otherwise it has to request ownership first.
+ * This multi-step process ensures that access contention is resolved
+ * gracefully.
+ *
+ * Bus	Ownership	Other master	Action
+ * state		requested access
+ * ----------------------------------------------------
+ * off	-		yes		wait for arbitration timeout or
+ *					for other master to drop request
+ * off	no		no		take ownership
+ * off	yes		no		turn on bus
+ * on	yes		-		done
+ * on	no		-		wait for arbitration timeout or
+ *					for other master to release bus
+ *
+ * The main contention point occurs if the slave bus is off and both masters
+ * request ownership at the same time. In this case, one master will turn on
+ * the slave bus, believing that it owns it. The other master will request
+ * bus ownership. Result is that the bus is turned on, and master which did
+ * _not_ own the slave bus before ends up owning it.
+ */
+
+/* Control commands per PCA9541 datasheet */
+static const u8 pca9541_control[16] = {
+	4, 0, 1, 5, 4, 4, 5, 5, 0, 0, 1, 1, 0, 4, 5, 1
+};
+
+/*
+ * Channel arbitration
+ *
+ * Return values:
+ *  <0: error
+ *  0 : bus not acquired
+ *  1 : bus acquired
+ */
+static int pca9541_arbitrate(struct i2c_client *client)
+{
+	struct i2c_mux_core *muxc = i2c_get_clientdata(client);
+	struct pca9541 *data = i2c_mux_priv(muxc);
+	int reg;
+
+	reg = pca9541_reg_read(client, PCA9541_CONTROL);
+	if (reg < 0)
+		return reg;
+
+	if (busoff(reg)) {
+		int istat;
+		/*
+		 * Bus is off. Request ownership or turn it on unless
+		 * other master requested ownership.
+		 */
+		istat = pca9541_reg_read(client, PCA9541_ISTAT);
+		if (!(istat & PCA9541_ISTAT_NMYTEST)
+		    || time_is_before_eq_jiffies(data->arb_timeout)) {
+			/*
+			 * Other master did not request ownership,
+			 * or arbitration timeout expired. Take the bus.
+			 */
+			pca9541_reg_write(client,
+					  PCA9541_CONTROL,
+					  pca9541_control[reg & 0x0f]
+					  | PCA9541_CTL_NTESTON);
+			data->select_timeout = SELECT_DELAY_SHORT;
+		} else {
+			/*
+			 * Other master requested ownership.
+			 * Set extra long timeout to give it time to acquire it.
+			 */
+			data->select_timeout = SELECT_DELAY_LONG * 2;
+		}
+	} else if (mybus(reg)) {
+		/*
+		 * Bus is on, and we own it. We are done with acquisition.
+		 * Reset NTESTON and BUSINIT, then return success.
+		 */
+		if (reg & (PCA9541_CTL_NTESTON | PCA9541_CTL_BUSINIT))
+			pca9541_reg_write(client,
+					  PCA9541_CONTROL,
+					  reg & ~(PCA9541_CTL_NTESTON
+						  | PCA9541_CTL_BUSINIT));
+		return 1;
+	} else {
+		/*
+		 * Other master owns the bus.
+		 * If arbitration timeout has expired, force ownership.
+		 * Otherwise request it.
+		 */
+		data->select_timeout = SELECT_DELAY_LONG;
+		if (time_is_before_eq_jiffies(data->arb_timeout)) {
+			/* Time is up, take the bus and reset it. */
+			pca9541_reg_write(client,
+					  PCA9541_CONTROL,
+					  pca9541_control[reg & 0x0f]
+					  | PCA9541_CTL_BUSINIT
+					  | PCA9541_CTL_NTESTON);
+		} else {
+			/* Request bus ownership if needed */
+			if (!(reg & PCA9541_CTL_NTESTON))
+				pca9541_reg_write(client,
+						  PCA9541_CONTROL,
+						  reg | PCA9541_CTL_NTESTON);
+		}
+	}
+	return 0;
+}
+
+static int pca9541_select_chan(struct i2c_mux_core *muxc, u32 chan)
+{
+	struct pca9541 *data = i2c_mux_priv(muxc);
+	struct i2c_client *client = data->client;
+	int ret;
+	unsigned long timeout = jiffies + ARB2_TIMEOUT;
+		/* give up after this time */
+
+	data->arb_timeout = jiffies + ARB_TIMEOUT;
+		/* force bus ownership after this time */
+
+	do {
+		ret = pca9541_arbitrate(client);
+		if (ret)
+			return ret < 0 ? ret : 0;
+
+		if (data->select_timeout == SELECT_DELAY_SHORT)
+			udelay(data->select_timeout);
+		else
+			msleep(data->select_timeout / 1000);
+	} while (time_is_after_eq_jiffies(timeout));
+
+	return -ETIMEDOUT;
+}
+
+static int pca9541_release_chan(struct i2c_mux_core *muxc, u32 chan)
+{
+	struct pca9541 *data = i2c_mux_priv(muxc);
+	struct i2c_client *client = data->client;
+
+	pca9541_release_bus(client);
+	return 0;
+}
+
+/*
+ * I2C init/probing/exit functions
+ */
+static int pca9541_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adap = client->adapter;
+	struct i2c_mux_core *muxc;
+	struct pca9541 *data;
+	int ret;
+
+	if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -ENODEV;
+
+	/*
+	 * I2C accesses are unprotected here.
+	 * We have to lock the I2C segment before releasing the bus.
+	 */
+	i2c_lock_bus(adap, I2C_LOCK_SEGMENT);
+	pca9541_release_bus(client);
+	i2c_unlock_bus(adap, I2C_LOCK_SEGMENT);
+
+	/* Create mux adapter */
+
+	muxc = i2c_mux_alloc(adap, &client->dev, 1, sizeof(*data),
+			     I2C_MUX_ARBITRATOR,
+			     pca9541_select_chan, pca9541_release_chan);
+	if (!muxc)
+		return -ENOMEM;
+
+	data = i2c_mux_priv(muxc);
+	data->client = client;
+
+	i2c_set_clientdata(client, muxc);
+
+	ret = i2c_mux_add_adapter(muxc, 0, 0, 0);
+	if (ret)
+		return ret;
+
+	dev_info(&client->dev, "registered master selector for I2C %s\n",
+		 client->name);
+
+	return 0;
+}
+
+static void pca9541_remove(struct i2c_client *client)
+{
+	struct i2c_mux_core *muxc = i2c_get_clientdata(client);
+
+	i2c_mux_del_adapters(muxc);
+}
+
+static struct i2c_driver pca9541_driver = {
+	.driver = {
+		   .name = "pca9541",
+		   .of_match_table = of_match_ptr(pca9541_of_match),
+		   },
+	.probe = pca9541_probe,
+	.remove = pca9541_remove,
+	.id_table = pca9541_id,
+};
+
+module_i2c_driver(pca9541_driver);
+
+MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
+MODULE_DESCRIPTION("PCA9541 I2C master selector driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c
new file mode 100644
index 000000000..a5f458b63
--- /dev/null
+++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
@@ -0,0 +1,566 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * I2C multiplexer
+ *
+ * Copyright (c) 2008-2009 Rodolfo Giometti <giometti@linux.it>
+ * Copyright (c) 2008-2009 Eurotech S.p.A. <info@eurotech.it>
+ *
+ * This module supports the PCA954x and PCA984x series of I2C multiplexer/switch
+ * chips made by NXP Semiconductors.
+ * This includes the:
+ *	 PCA9540, PCA9542, PCA9543, PCA9544, PCA9545, PCA9546, PCA9547,
+ *	 PCA9548, PCA9846, PCA9847, PCA9848 and PCA9849.
+ *
+ * These chips are all controlled via the I2C bus itself, and all have a
+ * single 8-bit register. The upstream "parent" bus fans out to two,
+ * four, or eight downstream busses or channels; which of these
+ * are selected is determined by the chip type and register contents. A
+ * mux can select only one sub-bus at a time; a switch can select any
+ * combination simultaneously.
+ *
+ * Based on:
+ *	pca954x.c from Kumar Gala <galak@kernel.crashing.org>
+ * Copyright (C) 2006
+ *
+ * Based on:
+ *	pca954x.c from Ken Harrenstien
+ * Copyright (C) 2004 Google, Inc. (Ken Harrenstien)
+ *
+ * Based on:
+ *	i2c-virtual_cb.c from Brian Kuschak <bkuschak@yahoo.com>
+ * and
+ *	pca9540.c from Jean Delvare <jdelvare@suse.de>.
+ */
+
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/i2c-mux.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/property.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <dt-bindings/mux/mux.h>
+
+#define PCA954X_MAX_NCHANS 8
+
+#define PCA954X_IRQ_OFFSET 4
+
+enum pca_type {
+	pca_9540,
+	pca_9542,
+	pca_9543,
+	pca_9544,
+	pca_9545,
+	pca_9546,
+	pca_9547,
+	pca_9548,
+	pca_9846,
+	pca_9847,
+	pca_9848,
+	pca_9849,
+};
+
+struct chip_desc {
+	u8 nchans;
+	u8 enable;	/* used for muxes only */
+	u8 has_irq;
+	enum muxtype {
+		pca954x_ismux = 0,
+		pca954x_isswi
+	} muxtype;
+	struct i2c_device_identity id;
+};
+
+struct pca954x {
+	const struct chip_desc *chip;
+
+	u8 last_chan;		/* last register value */
+	/* MUX_IDLE_AS_IS, MUX_IDLE_DISCONNECT or >= 0 for channel */
+	s32 idle_state;
+
+	struct i2c_client *client;
+
+	struct irq_domain *irq;
+	unsigned int irq_mask;
+	raw_spinlock_t lock;
+};
+
+/* Provide specs for the PCA954x types we know about */
+static const struct chip_desc chips[] = {
+	[pca_9540] = {
+		.nchans = 2,
+		.enable = 0x4,
+		.muxtype = pca954x_ismux,
+		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE },
+	},
+	[pca_9542] = {
+		.nchans = 2,
+		.enable = 0x4,
+		.has_irq = 1,
+		.muxtype = pca954x_ismux,
+		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE },
+	},
+	[pca_9543] = {
+		.nchans = 2,
+		.has_irq = 1,
+		.muxtype = pca954x_isswi,
+		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE },
+	},
+	[pca_9544] = {
+		.nchans = 4,
+		.enable = 0x4,
+		.has_irq = 1,
+		.muxtype = pca954x_ismux,
+		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE },
+	},
+	[pca_9545] = {
+		.nchans = 4,
+		.has_irq = 1,
+		.muxtype = pca954x_isswi,
+		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE },
+	},
+	[pca_9546] = {
+		.nchans = 4,
+		.muxtype = pca954x_isswi,
+		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE },
+	},
+	[pca_9547] = {
+		.nchans = 8,
+		.enable = 0x8,
+		.muxtype = pca954x_ismux,
+		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE },
+	},
+	[pca_9548] = {
+		.nchans = 8,
+		.muxtype = pca954x_isswi,
+		.id = { .manufacturer_id = I2C_DEVICE_ID_NONE },
+	},
+	[pca_9846] = {
+		.nchans = 4,
+		.muxtype = pca954x_isswi,
+		.id = {
+			.manufacturer_id = I2C_DEVICE_ID_NXP_SEMICONDUCTORS,
+			.part_id = 0x10b,
+		},
+	},
+	[pca_9847] = {
+		.nchans = 8,
+		.enable = 0x8,
+		.muxtype = pca954x_ismux,
+		.id = {
+			.manufacturer_id = I2C_DEVICE_ID_NXP_SEMICONDUCTORS,
+			.part_id = 0x108,
+		},
+	},
+	[pca_9848] = {
+		.nchans = 8,
+		.muxtype = pca954x_isswi,
+		.id = {
+			.manufacturer_id = I2C_DEVICE_ID_NXP_SEMICONDUCTORS,
+			.part_id = 0x10a,
+		},
+	},
+	[pca_9849] = {
+		.nchans = 4,
+		.enable = 0x4,
+		.muxtype = pca954x_ismux,
+		.id = {
+			.manufacturer_id = I2C_DEVICE_ID_NXP_SEMICONDUCTORS,
+			.part_id = 0x109,
+		},
+	},
+};
+
+static const struct i2c_device_id pca954x_id[] = {
+	{ "pca9540", pca_9540 },
+	{ "pca9542", pca_9542 },
+	{ "pca9543", pca_9543 },
+	{ "pca9544", pca_9544 },
+	{ "pca9545", pca_9545 },
+	{ "pca9546", pca_9546 },
+	{ "pca9547", pca_9547 },
+	{ "pca9548", pca_9548 },
+	{ "pca9846", pca_9846 },
+	{ "pca9847", pca_9847 },
+	{ "pca9848", pca_9848 },
+	{ "pca9849", pca_9849 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, pca954x_id);
+
+static const struct of_device_id pca954x_of_match[] = {
+	{ .compatible = "nxp,pca9540", .data = &chips[pca_9540] },
+	{ .compatible = "nxp,pca9542", .data = &chips[pca_9542] },
+	{ .compatible = "nxp,pca9543", .data = &chips[pca_9543] },
+	{ .compatible = "nxp,pca9544", .data = &chips[pca_9544] },
+	{ .compatible = "nxp,pca9545", .data = &chips[pca_9545] },
+	{ .compatible = "nxp,pca9546", .data = &chips[pca_9546] },
+	{ .compatible = "nxp,pca9547", .data = &chips[pca_9547] },
+	{ .compatible = "nxp,pca9548", .data = &chips[pca_9548] },
+	{ .compatible = "nxp,pca9846", .data = &chips[pca_9846] },
+	{ .compatible = "nxp,pca9847", .data = &chips[pca_9847] },
+	{ .compatible = "nxp,pca9848", .data = &chips[pca_9848] },
+	{ .compatible = "nxp,pca9849", .data = &chips[pca_9849] },
+	{}
+};
+MODULE_DEVICE_TABLE(of, pca954x_of_match);
+
+/* Write to mux register. Don't use i2c_transfer()/i2c_smbus_xfer()
+   for this as they will try to lock adapter a second time */
+static int pca954x_reg_write(struct i2c_adapter *adap,
+			     struct i2c_client *client, u8 val)
+{
+	union i2c_smbus_data dummy;
+
+	return __i2c_smbus_xfer(adap, client->addr, client->flags,
+				I2C_SMBUS_WRITE, val,
+				I2C_SMBUS_BYTE, &dummy);
+}
+
+static u8 pca954x_regval(struct pca954x *data, u8 chan)
+{
+	/* We make switches look like muxes, not sure how to be smarter. */
+	if (data->chip->muxtype == pca954x_ismux)
+		return chan | data->chip->enable;
+	else
+		return 1 << chan;
+}
+
+static int pca954x_select_chan(struct i2c_mux_core *muxc, u32 chan)
+{
+	struct pca954x *data = i2c_mux_priv(muxc);
+	struct i2c_client *client = data->client;
+	u8 regval;
+	int ret = 0;
+
+	regval = pca954x_regval(data, chan);
+	/* Only select the channel if its different from the last channel */
+	if (data->last_chan != regval) {
+		ret = pca954x_reg_write(muxc->parent, client, regval);
+		data->last_chan = ret < 0 ? 0 : regval;
+	}
+
+	return ret;
+}
+
+static int pca954x_deselect_mux(struct i2c_mux_core *muxc, u32 chan)
+{
+	struct pca954x *data = i2c_mux_priv(muxc);
+	struct i2c_client *client = data->client;
+	s32 idle_state;
+
+	idle_state = READ_ONCE(data->idle_state);
+	if (idle_state >= 0)
+		/* Set the mux back to a predetermined channel */
+		return pca954x_select_chan(muxc, idle_state);
+
+	if (idle_state == MUX_IDLE_DISCONNECT) {
+		/* Deselect active channel */
+		data->last_chan = 0;
+		return pca954x_reg_write(muxc->parent, client,
+					 data->last_chan);
+	}
+
+	/* otherwise leave as-is */
+
+	return 0;
+}
+
+static ssize_t idle_state_show(struct device *dev,
+				    struct device_attribute *attr,
+				    char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct i2c_mux_core *muxc = i2c_get_clientdata(client);
+	struct pca954x *data = i2c_mux_priv(muxc);
+
+	return sprintf(buf, "%d\n", READ_ONCE(data->idle_state));
+}
+
+static ssize_t idle_state_store(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct i2c_mux_core *muxc = i2c_get_clientdata(client);
+	struct pca954x *data = i2c_mux_priv(muxc);
+	int val;
+	int ret;
+
+	ret = kstrtoint(buf, 0, &val);
+	if (ret < 0)
+		return ret;
+
+	if (val != MUX_IDLE_AS_IS && val != MUX_IDLE_DISCONNECT &&
+	    (val < 0 || val >= data->chip->nchans))
+		return -EINVAL;
+
+	i2c_lock_bus(muxc->parent, I2C_LOCK_SEGMENT);
+
+	WRITE_ONCE(data->idle_state, val);
+	/*
+	 * Set the mux into a state consistent with the new
+	 * idle_state.
+	 */
+	if (data->last_chan || val != MUX_IDLE_DISCONNECT)
+		ret = pca954x_deselect_mux(muxc, 0);
+
+	i2c_unlock_bus(muxc->parent, I2C_LOCK_SEGMENT);
+
+	return ret < 0 ? ret : count;
+}
+
+static DEVICE_ATTR_RW(idle_state);
+
+static irqreturn_t pca954x_irq_handler(int irq, void *dev_id)
+{
+	struct pca954x *data = dev_id;
+	unsigned long pending;
+	int ret, i;
+
+	ret = i2c_smbus_read_byte(data->client);
+	if (ret < 0)
+		return IRQ_NONE;
+
+	pending = (ret >> PCA954X_IRQ_OFFSET) & (BIT(data->chip->nchans) - 1);
+	for_each_set_bit(i, &pending, data->chip->nchans)
+		handle_nested_irq(irq_linear_revmap(data->irq, i));
+
+	return IRQ_RETVAL(pending);
+}
+
+static int pca954x_irq_set_type(struct irq_data *idata, unsigned int type)
+{
+	if ((type & IRQ_TYPE_SENSE_MASK) != IRQ_TYPE_LEVEL_LOW)
+		return -EINVAL;
+	return 0;
+}
+
+static struct irq_chip pca954x_irq_chip = {
+	.name = "i2c-mux-pca954x",
+	.irq_set_type = pca954x_irq_set_type,
+};
+
+static int pca954x_irq_setup(struct i2c_mux_core *muxc)
+{
+	struct pca954x *data = i2c_mux_priv(muxc);
+	struct i2c_client *client = data->client;
+	int c, irq;
+
+	if (!data->chip->has_irq || client->irq <= 0)
+		return 0;
+
+	raw_spin_lock_init(&data->lock);
+
+	data->irq = irq_domain_add_linear(client->dev.of_node,
+					  data->chip->nchans,
+					  &irq_domain_simple_ops, data);
+	if (!data->irq)
+		return -ENODEV;
+
+	for (c = 0; c < data->chip->nchans; c++) {
+		irq = irq_create_mapping(data->irq, c);
+		if (!irq) {
+			dev_err(&client->dev, "failed irq create map\n");
+			return -EINVAL;
+		}
+		irq_set_chip_data(irq, data);
+		irq_set_chip_and_handler(irq, &pca954x_irq_chip,
+			handle_simple_irq);
+	}
+
+	return 0;
+}
+
+static void pca954x_cleanup(struct i2c_mux_core *muxc)
+{
+	struct pca954x *data = i2c_mux_priv(muxc);
+	int c, irq;
+
+	if (data->irq) {
+		for (c = 0; c < data->chip->nchans; c++) {
+			irq = irq_find_mapping(data->irq, c);
+			irq_dispose_mapping(irq);
+		}
+		irq_domain_remove(data->irq);
+	}
+	i2c_mux_del_adapters(muxc);
+}
+
+static int pca954x_init(struct i2c_client *client, struct pca954x *data)
+{
+	int ret;
+
+	if (data->idle_state >= 0)
+		data->last_chan = pca954x_regval(data, data->idle_state);
+	else
+		data->last_chan = 0; /* Disconnect multiplexer */
+
+	ret = i2c_smbus_write_byte(client, data->last_chan);
+	if (ret < 0)
+		data->last_chan = 0;
+
+	return ret;
+}
+
+/*
+ * I2C init/probing/exit functions
+ */
+static int pca954x_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adap = client->adapter;
+	struct device *dev = &client->dev;
+	struct gpio_desc *gpio;
+	struct i2c_mux_core *muxc;
+	struct pca954x *data;
+	int num;
+	int ret;
+
+	if (!i2c_check_functionality(adap, I2C_FUNC_SMBUS_BYTE))
+		return -ENODEV;
+
+	muxc = i2c_mux_alloc(adap, dev, PCA954X_MAX_NCHANS, sizeof(*data), 0,
+			     pca954x_select_chan, pca954x_deselect_mux);
+	if (!muxc)
+		return -ENOMEM;
+	data = i2c_mux_priv(muxc);
+
+	i2c_set_clientdata(client, muxc);
+	data->client = client;
+
+	/* Reset the mux if a reset GPIO is specified. */
+	gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(gpio))
+		return PTR_ERR(gpio);
+	if (gpio) {
+		udelay(1);
+		gpiod_set_value_cansleep(gpio, 0);
+		/* Give the chip some time to recover. */
+		udelay(1);
+	}
+
+	data->chip = device_get_match_data(dev);
+	if (!data->chip)
+		data->chip = &chips[id->driver_data];
+
+	if (data->chip->id.manufacturer_id != I2C_DEVICE_ID_NONE) {
+		struct i2c_device_identity id;
+
+		ret = i2c_get_device_id(client, &id);
+		if (ret && ret != -EOPNOTSUPP)
+			return ret;
+
+		if (!ret &&
+		    (id.manufacturer_id != data->chip->id.manufacturer_id ||
+		     id.part_id != data->chip->id.part_id)) {
+			dev_warn(dev, "unexpected device id %03x-%03x-%x\n",
+				 id.manufacturer_id, id.part_id,
+				 id.die_revision);
+			return -ENODEV;
+		}
+	}
+
+	data->idle_state = MUX_IDLE_AS_IS;
+	if (device_property_read_u32(dev, "idle-state", &data->idle_state)) {
+		if (device_property_read_bool(dev, "i2c-mux-idle-disconnect"))
+			data->idle_state = MUX_IDLE_DISCONNECT;
+	}
+
+	/*
+	 * Write the mux register at addr to verify
+	 * that the mux is in fact present. This also
+	 * initializes the mux to a channel
+	 * or disconnected state.
+	 */
+	ret = pca954x_init(client, data);
+	if (ret < 0) {
+		dev_warn(dev, "probe failed\n");
+		return -ENODEV;
+	}
+
+	ret = pca954x_irq_setup(muxc);
+	if (ret)
+		goto fail_cleanup;
+
+	/* Now create an adapter for each channel */
+	for (num = 0; num < data->chip->nchans; num++) {
+		ret = i2c_mux_add_adapter(muxc, 0, num, 0);
+		if (ret)
+			goto fail_cleanup;
+	}
+
+	if (data->irq) {
+		ret = devm_request_threaded_irq(dev, data->client->irq,
+						NULL, pca954x_irq_handler,
+						IRQF_ONESHOT | IRQF_SHARED,
+						"pca954x", data);
+		if (ret)
+			goto fail_cleanup;
+	}
+
+	/*
+	 * The attr probably isn't going to be needed in most cases,
+	 * so don't fail completely on error.
+	 */
+	device_create_file(dev, &dev_attr_idle_state);
+
+	dev_info(dev, "registered %d multiplexed busses for I2C %s %s\n",
+		 num, data->chip->muxtype == pca954x_ismux
+				? "mux" : "switch", client->name);
+
+	return 0;
+
+fail_cleanup:
+	pca954x_cleanup(muxc);
+	return ret;
+}
+
+static void pca954x_remove(struct i2c_client *client)
+{
+	struct i2c_mux_core *muxc = i2c_get_clientdata(client);
+
+	device_remove_file(&client->dev, &dev_attr_idle_state);
+
+	pca954x_cleanup(muxc);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int pca954x_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct i2c_mux_core *muxc = i2c_get_clientdata(client);
+	struct pca954x *data = i2c_mux_priv(muxc);
+	int ret;
+
+	ret = pca954x_init(client, data);
+	if (ret < 0)
+		dev_err(&client->dev, "failed to verify mux presence\n");
+
+	return ret;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(pca954x_pm, NULL, pca954x_resume);
+
+static struct i2c_driver pca954x_driver = {
+	.driver		= {
+		.name	= "pca954x",
+		.pm	= &pca954x_pm,
+		.of_match_table = pca954x_of_match,
+	},
+	.probe		= pca954x_probe,
+	.remove		= pca954x_remove,
+	.id_table	= pca954x_id,
+};
+
+module_i2c_driver(pca954x_driver);
+
+MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>");
+MODULE_DESCRIPTION("PCA954x I2C mux/switch driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/i2c/muxes/i2c-mux-pinctrl.c b/drivers/i2c/muxes/i2c-mux-pinctrl.c
new file mode 100644
index 000000000..f0bc4f399
--- /dev/null
+++ b/drivers/i2c/muxes/i2c-mux-pinctrl.c
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * I2C multiplexer using pinctrl API
+ *
+ * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
+ */
+
+#include <linux/i2c.h>
+#include <linux/i2c-mux.h>
+#include <linux/module.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include "../../pinctrl/core.h"
+
+struct i2c_mux_pinctrl {
+	struct pinctrl *pinctrl;
+	struct pinctrl_state *states[];
+};
+
+static int i2c_mux_pinctrl_select(struct i2c_mux_core *muxc, u32 chan)
+{
+	struct i2c_mux_pinctrl *mux = i2c_mux_priv(muxc);
+
+	return pinctrl_select_state(mux->pinctrl, mux->states[chan]);
+}
+
+static int i2c_mux_pinctrl_deselect(struct i2c_mux_core *muxc, u32 chan)
+{
+	return i2c_mux_pinctrl_select(muxc, muxc->num_adapters);
+}
+
+static struct i2c_adapter *i2c_mux_pinctrl_root_adapter(
+	struct pinctrl_state *state)
+{
+	struct i2c_adapter *root = NULL;
+	struct pinctrl_setting *setting;
+	struct i2c_adapter *pin_root;
+
+	list_for_each_entry(setting, &state->settings, node) {
+		pin_root = i2c_root_adapter(setting->pctldev->dev);
+		if (!pin_root)
+			return NULL;
+		if (!root)
+			root = pin_root;
+		else if (root != pin_root)
+			return NULL;
+	}
+
+	return root;
+}
+
+static struct i2c_adapter *i2c_mux_pinctrl_parent_adapter(struct device *dev)
+{
+	struct device_node *np = dev->of_node;
+	struct device_node *parent_np;
+	struct i2c_adapter *parent;
+
+	parent_np = of_parse_phandle(np, "i2c-parent", 0);
+	if (!parent_np) {
+		dev_err(dev, "Cannot parse i2c-parent\n");
+		return ERR_PTR(-ENODEV);
+	}
+	parent = of_get_i2c_adapter_by_node(parent_np);
+	of_node_put(parent_np);
+	if (!parent)
+		return ERR_PTR(-EPROBE_DEFER);
+
+	return parent;
+}
+
+static int i2c_mux_pinctrl_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct i2c_mux_core *muxc;
+	struct i2c_mux_pinctrl *mux;
+	struct i2c_adapter *parent;
+	struct i2c_adapter *root;
+	int num_names, i, ret;
+	const char *name;
+
+	num_names = of_property_count_strings(np, "pinctrl-names");
+	if (num_names < 0) {
+		dev_err(dev, "Cannot parse pinctrl-names: %d\n",
+			num_names);
+		return num_names;
+	}
+
+	parent = i2c_mux_pinctrl_parent_adapter(dev);
+	if (IS_ERR(parent))
+		return PTR_ERR(parent);
+
+	muxc = i2c_mux_alloc(parent, dev, num_names,
+			     struct_size(mux, states, num_names),
+			     0, i2c_mux_pinctrl_select, NULL);
+	if (!muxc) {
+		ret = -ENOMEM;
+		goto err_put_parent;
+	}
+	mux = i2c_mux_priv(muxc);
+
+	platform_set_drvdata(pdev, muxc);
+
+	mux->pinctrl = devm_pinctrl_get(dev);
+	if (IS_ERR(mux->pinctrl)) {
+		ret = PTR_ERR(mux->pinctrl);
+		dev_err(dev, "Cannot get pinctrl: %d\n", ret);
+		goto err_put_parent;
+	}
+
+	for (i = 0; i < num_names; i++) {
+		ret = of_property_read_string_index(np, "pinctrl-names", i,
+						    &name);
+		if (ret < 0) {
+			dev_err(dev, "Cannot parse pinctrl-names: %d\n", ret);
+			goto err_put_parent;
+		}
+
+		mux->states[i] = pinctrl_lookup_state(mux->pinctrl, name);
+		if (IS_ERR(mux->states[i])) {
+			ret = PTR_ERR(mux->states[i]);
+			dev_err(dev, "Cannot look up pinctrl state %s: %d\n",
+				name, ret);
+			goto err_put_parent;
+		}
+
+		if (strcmp(name, "idle"))
+			continue;
+
+		if (i != num_names - 1) {
+			dev_err(dev, "idle state must be last\n");
+			ret = -EINVAL;
+			goto err_put_parent;
+		}
+		muxc->deselect = i2c_mux_pinctrl_deselect;
+	}
+
+	root = i2c_root_adapter(&muxc->parent->dev);
+
+	muxc->mux_locked = true;
+	for (i = 0; i < num_names; i++) {
+		if (root != i2c_mux_pinctrl_root_adapter(mux->states[i])) {
+			muxc->mux_locked = false;
+			break;
+		}
+	}
+	if (muxc->mux_locked)
+		dev_info(dev, "mux-locked i2c mux\n");
+
+	/* Do not add any adapter for the idle state (if it's there at all). */
+	for (i = 0; i < num_names - !!muxc->deselect; i++) {
+		ret = i2c_mux_add_adapter(muxc, 0, i, 0);
+		if (ret)
+			goto err_del_adapter;
+	}
+
+	return 0;
+
+err_del_adapter:
+	i2c_mux_del_adapters(muxc);
+err_put_parent:
+	i2c_put_adapter(parent);
+
+	return ret;
+}
+
+static int i2c_mux_pinctrl_remove(struct platform_device *pdev)
+{
+	struct i2c_mux_core *muxc = platform_get_drvdata(pdev);
+
+	i2c_mux_del_adapters(muxc);
+	i2c_put_adapter(muxc->parent);
+
+	return 0;
+}
+
+static const struct of_device_id i2c_mux_pinctrl_of_match[] = {
+	{ .compatible = "i2c-mux-pinctrl", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, i2c_mux_pinctrl_of_match);
+
+static struct platform_driver i2c_mux_pinctrl_driver = {
+	.driver	= {
+		.name	= "i2c-mux-pinctrl",
+		.of_match_table = i2c_mux_pinctrl_of_match,
+	},
+	.probe	= i2c_mux_pinctrl_probe,
+	.remove	= i2c_mux_pinctrl_remove,
+};
+module_platform_driver(i2c_mux_pinctrl_driver);
+
+MODULE_DESCRIPTION("pinctrl-based I2C multiplexer driver");
+MODULE_AUTHOR("Stephen Warren <swarren@nvidia.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:i2c-mux-pinctrl");
diff --git a/drivers/i2c/muxes/i2c-mux-reg.c b/drivers/i2c/muxes/i2c-mux-reg.c
new file mode 100644
index 000000000..30a6de169
--- /dev/null
+++ b/drivers/i2c/muxes/i2c-mux-reg.c
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * I2C multiplexer using a single register
+ *
+ * Copyright 2015 Freescale Semiconductor
+ * York Sun  <yorksun@freescale.com>
+ */
+
+#include <linux/i2c.h>
+#include <linux/i2c-mux.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_data/i2c-mux-reg.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+struct regmux {
+	struct i2c_mux_reg_platform_data data;
+};
+
+static int i2c_mux_reg_set(const struct regmux *mux, unsigned int chan_id)
+{
+	if (!mux->data.reg)
+		return -EINVAL;
+
+	/*
+	 * Write to the register, followed by a read to ensure the write is
+	 * completed on a "posted" bus, for example PCI or write buffers.
+	 * The endianness of reading doesn't matter and the return data
+	 * is not used.
+	 */
+	switch (mux->data.reg_size) {
+	case 4:
+		if (mux->data.little_endian)
+			iowrite32(chan_id, mux->data.reg);
+		else
+			iowrite32be(chan_id, mux->data.reg);
+		if (!mux->data.write_only)
+			ioread32(mux->data.reg);
+		break;
+	case 2:
+		if (mux->data.little_endian)
+			iowrite16(chan_id, mux->data.reg);
+		else
+			iowrite16be(chan_id, mux->data.reg);
+		if (!mux->data.write_only)
+			ioread16(mux->data.reg);
+		break;
+	case 1:
+		iowrite8(chan_id, mux->data.reg);
+		if (!mux->data.write_only)
+			ioread8(mux->data.reg);
+		break;
+	}
+
+	return 0;
+}
+
+static int i2c_mux_reg_select(struct i2c_mux_core *muxc, u32 chan)
+{
+	struct regmux *mux = i2c_mux_priv(muxc);
+
+	return i2c_mux_reg_set(mux, chan);
+}
+
+static int i2c_mux_reg_deselect(struct i2c_mux_core *muxc, u32 chan)
+{
+	struct regmux *mux = i2c_mux_priv(muxc);
+
+	if (mux->data.idle_in_use)
+		return i2c_mux_reg_set(mux, mux->data.idle);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static int i2c_mux_reg_probe_dt(struct regmux *mux,
+				struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct device_node *adapter_np, *child;
+	struct i2c_adapter *adapter;
+	struct resource res;
+	unsigned *values;
+	int i = 0;
+
+	if (!np)
+		return -ENODEV;
+
+	adapter_np = of_parse_phandle(np, "i2c-parent", 0);
+	if (!adapter_np) {
+		dev_err(&pdev->dev, "Cannot parse i2c-parent\n");
+		return -ENODEV;
+	}
+	adapter = of_find_i2c_adapter_by_node(adapter_np);
+	of_node_put(adapter_np);
+	if (!adapter)
+		return -EPROBE_DEFER;
+
+	mux->data.parent = i2c_adapter_id(adapter);
+	put_device(&adapter->dev);
+
+	mux->data.n_values = of_get_child_count(np);
+	if (of_property_read_bool(np, "little-endian")) {
+		mux->data.little_endian = true;
+	} else if (of_property_read_bool(np, "big-endian")) {
+		mux->data.little_endian = false;
+	} else {
+#if defined(__BYTE_ORDER) ? __BYTE_ORDER == __LITTLE_ENDIAN : \
+	defined(__LITTLE_ENDIAN)
+		mux->data.little_endian = true;
+#elif defined(__BYTE_ORDER) ? __BYTE_ORDER == __BIG_ENDIAN : \
+	defined(__BIG_ENDIAN)
+		mux->data.little_endian = false;
+#else
+#error Endianness not defined?
+#endif
+	}
+	mux->data.write_only = of_property_read_bool(np, "write-only");
+
+	values = devm_kcalloc(&pdev->dev,
+			      mux->data.n_values, sizeof(*mux->data.values),
+			      GFP_KERNEL);
+	if (!values)
+		return -ENOMEM;
+
+	for_each_child_of_node(np, child) {
+		of_property_read_u32(child, "reg", values + i);
+		i++;
+	}
+	mux->data.values = values;
+
+	if (!of_property_read_u32(np, "idle-state", &mux->data.idle))
+		mux->data.idle_in_use = true;
+
+	/* map address from "reg" if exists */
+	if (of_address_to_resource(np, 0, &res) == 0) {
+		mux->data.reg_size = resource_size(&res);
+		mux->data.reg = devm_ioremap_resource(&pdev->dev, &res);
+		if (IS_ERR(mux->data.reg))
+			return PTR_ERR(mux->data.reg);
+	}
+
+	return 0;
+}
+#else
+static int i2c_mux_reg_probe_dt(struct regmux *mux,
+				struct platform_device *pdev)
+{
+	return 0;
+}
+#endif
+
+static int i2c_mux_reg_probe(struct platform_device *pdev)
+{
+	struct i2c_mux_core *muxc;
+	struct regmux *mux;
+	struct i2c_adapter *parent;
+	struct resource *res;
+	unsigned int class;
+	int i, ret, nr;
+
+	mux = devm_kzalloc(&pdev->dev, sizeof(*mux), GFP_KERNEL);
+	if (!mux)
+		return -ENOMEM;
+
+	if (dev_get_platdata(&pdev->dev)) {
+		memcpy(&mux->data, dev_get_platdata(&pdev->dev),
+			sizeof(mux->data));
+	} else {
+		ret = i2c_mux_reg_probe_dt(mux, pdev);
+		if (ret < 0)
+			return dev_err_probe(&pdev->dev, ret,
+					     "Error parsing device tree");
+	}
+
+	parent = i2c_get_adapter(mux->data.parent);
+	if (!parent)
+		return -EPROBE_DEFER;
+
+	if (!mux->data.reg) {
+		dev_info(&pdev->dev,
+			"Register not set, using platform resource\n");
+		mux->data.reg = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+		if (IS_ERR(mux->data.reg)) {
+			ret = PTR_ERR(mux->data.reg);
+			goto err_put_parent;
+		}
+		mux->data.reg_size = resource_size(res);
+	}
+
+	if (mux->data.reg_size != 4 && mux->data.reg_size != 2 &&
+	    mux->data.reg_size != 1) {
+		dev_err(&pdev->dev, "Invalid register size\n");
+		ret = -EINVAL;
+		goto err_put_parent;
+	}
+
+	muxc = i2c_mux_alloc(parent, &pdev->dev, mux->data.n_values, 0, 0,
+			     i2c_mux_reg_select, NULL);
+	if (!muxc) {
+		ret = -ENOMEM;
+		goto err_put_parent;
+	}
+	muxc->priv = mux;
+
+	platform_set_drvdata(pdev, muxc);
+
+	if (mux->data.idle_in_use)
+		muxc->deselect = i2c_mux_reg_deselect;
+
+	for (i = 0; i < mux->data.n_values; i++) {
+		nr = mux->data.base_nr ? (mux->data.base_nr + i) : 0;
+		class = mux->data.classes ? mux->data.classes[i] : 0;
+
+		ret = i2c_mux_add_adapter(muxc, nr, mux->data.values[i], class);
+		if (ret)
+			goto err_del_mux_adapters;
+	}
+
+	dev_dbg(&pdev->dev, "%d port mux on %s adapter\n",
+		 mux->data.n_values, muxc->parent->name);
+
+	return 0;
+
+err_del_mux_adapters:
+	i2c_mux_del_adapters(muxc);
+err_put_parent:
+	i2c_put_adapter(parent);
+
+	return ret;
+}
+
+static int i2c_mux_reg_remove(struct platform_device *pdev)
+{
+	struct i2c_mux_core *muxc = platform_get_drvdata(pdev);
+
+	i2c_mux_del_adapters(muxc);
+	i2c_put_adapter(muxc->parent);
+
+	return 0;
+}
+
+static const struct of_device_id i2c_mux_reg_of_match[] = {
+	{ .compatible = "i2c-mux-reg", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, i2c_mux_reg_of_match);
+
+static struct platform_driver i2c_mux_reg_driver = {
+	.probe	= i2c_mux_reg_probe,
+	.remove	= i2c_mux_reg_remove,
+	.driver	= {
+		.name	= "i2c-mux-reg",
+		.of_match_table = of_match_ptr(i2c_mux_reg_of_match),
+	},
+};
+
+module_platform_driver(i2c_mux_reg_driver);
+
+MODULE_DESCRIPTION("Register-based I2C multiplexer driver");
+MODULE_AUTHOR("York Sun <yorksun@freescale.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:i2c-mux-reg");