Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 226 insertions, 0 deletions

diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig
new file mode 100644
index 000000000..b91fc5e6a
--- /dev/null
+++ b/drivers/iio/magnetometer/Kconfig
@@ -0,0 +1,226 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Magnetometer sensors
+#
+# When adding new entries keep the list in alphabetical order
+
+menu "Magnetometer sensors"
+
+config AK8974
+	tristate "Asahi Kasei AK8974 3-Axis Magnetometer"
+	depends on I2C
+	select REGMAP_I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Say yes here to build support for Asahi Kasei AK8974, AMI305 or
+	  AMI306 I2C-based 3-axis magnetometer chips.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called ak8974.
+
+config AK8975
+	tristate "Asahi Kasei AK8975 3-Axis Magnetometer"
+	depends on I2C
+	depends on GPIOLIB || COMPILE_TEST
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Say yes here to build support for Asahi Kasei AK8975, AK8963,
+	  AK09911, AK09912 or AK09916 3-Axis Magnetometer.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called ak8975.
+
+config AK09911
+	tristate "Asahi Kasei AK09911 3-axis Compass"
+	depends on I2C
+	depends on GPIOLIB || COMPILE_TEST
+	select AK8975
+	help
+	  Deprecated: AK09911 is now supported by AK8975 driver.
+
+config BMC150_MAGN
+	tristate
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+
+config BMC150_MAGN_I2C
+	tristate "Bosch BMC150 I2C Magnetometer Driver"
+	depends on I2C
+	select BMC150_MAGN
+	select REGMAP_I2C
+	help
+	  Say yes here to build support for the BMC150 magnetometer with
+	  I2C interface.
+
+	  This is a combo module with both accelerometer and magnetometer.
+	  This driver is only implementing magnetometer part, which has
+	  its own address and register map.
+
+	  This driver also supports I2C Bosch BMC156 and BMM150 chips.
+	  To compile this driver as a module, choose M here: the module will be
+	  called bmc150_magn_i2c.
+
+config BMC150_MAGN_SPI
+	tristate "Bosch BMC150 SPI Magnetometer Driver"
+	depends on SPI
+	select BMC150_MAGN
+	select REGMAP_SPI
+	help
+	  Say yes here to build support for the BMC150 magnetometer with
+	  SPI interface.
+
+	  This is a combo module with both accelerometer and magnetometer.
+	  This driver is only implementing magnetometer part, which has
+	  its own address and register map.
+
+	  This driver also supports SPI Bosch BMC156 and BMM150 chips.
+	  To compile this driver as a module, choose M here: the module will be
+	  called bmc150_magn_spi.
+
+config MAG3110
+	tristate "Freescale MAG3110 3-Axis Magnetometer"
+	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Say yes here to build support for the Freescale MAG3110 3-Axis
+	  magnetometer.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called mag3110.
+
+config HID_SENSOR_MAGNETOMETER_3D
+	depends on HID_SENSOR_HUB
+	select IIO_BUFFER
+	select HID_SENSOR_IIO_COMMON
+	select HID_SENSOR_IIO_TRIGGER
+	tristate "HID Magenetometer 3D"
+	help
+	  Say yes here to build support for the HID SENSOR
+	  Magnetometer 3D.
+
+config MMC35240
+	tristate "MEMSIC MMC35240 3-axis magnetic sensor"
+	select REGMAP_I2C
+	depends on I2C
+	help
+	  Say yes here to build support for the MEMSIC MMC35240 3-axis
+	  magnetic sensor.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called mmc35240.
+
+config IIO_ST_MAGN_3AXIS
+	tristate "STMicroelectronics magnetometers 3-Axis Driver"
+	depends on (I2C || SPI_MASTER) && SYSFS
+	select IIO_ST_SENSORS_CORE
+	select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
+	help
+	  Say yes here to build support for STMicroelectronics magnetometers:
+	  LSM303DLHC, LSM303DLM, LIS3MDL.
+
+	  Also need to enable at least one of I2C and SPI interface drivers
+	  below.
+
+config IIO_ST_MAGN_I2C_3AXIS
+	tristate "STMicroelectronics magnetometers 3-Axis I2C Interface"
+	depends on I2C && IIO_ST_MAGN_3AXIS
+	default I2C && IIO_ST_MAGN_3AXIS
+	select IIO_ST_SENSORS_I2C
+	help
+	  Build support for STMicroelectronics magnetometers I2C interface.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called st_magn_i2c.
+
+config IIO_ST_MAGN_SPI_3AXIS
+	tristate "STMicroelectronics magnetometers 3-Axis SPI Interface"
+	depends on SPI_MASTER && IIO_ST_MAGN_3AXIS
+	default SPI_MASTER && IIO_ST_MAGN_3AXIS
+	select IIO_ST_SENSORS_SPI
+	help
+	  Build support for STMicroelectronics magnetometers SPI interface.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called st_magn_spi.
+
+config SENSORS_HMC5843
+	tristate
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+
+config SENSORS_HMC5843_I2C
+	tristate "Honeywell HMC5843/5883/5883L 3-Axis Magnetometer (I2C)"
+	depends on I2C
+	select SENSORS_HMC5843
+	select REGMAP_I2C
+	help
+	  Say Y here to add support for the Honeywell HMC5843, HMC5883 and
+	  HMC5883L 3-Axis Magnetometer (digital compass).
+
+	  This driver can also be compiled as a set of modules.
+	  If so, these modules will be created:
+	  - hmc5843_core (core functions)
+	  - hmc5843_i2c (support for HMC5843, HMC5883, HMC5883L and HMC5983)
+
+config SENSORS_HMC5843_SPI
+	tristate "Honeywell HMC5983 3-Axis Magnetometer (SPI)"
+	depends on SPI_MASTER
+	select SENSORS_HMC5843
+	select REGMAP_SPI
+	help
+	  Say Y here to add support for the Honeywell HMC5983 3-Axis Magnetometer
+	  (digital compass).
+
+	  This driver can also be compiled as a set of modules.
+	  If so, these modules will be created:
+	  - hmc5843_core (core functions)
+	  - hmc5843_spi (support for HMC5983)
+
+config SENSORS_RM3100
+	tristate
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+
+config SENSORS_RM3100_I2C
+	tristate "PNI RM3100 3-Axis Magnetometer (I2C)"
+	depends on I2C
+	select SENSORS_RM3100
+	select REGMAP_I2C
+	help
+	  Say Y here to add support for the PNI RM3100 3-Axis Magnetometer.
+
+	  This driver can also be compiled as a module.
+	  To compile this driver as a module, choose M here: the module
+	  will be called rm3100-i2c.
+
+config SENSORS_RM3100_SPI
+	tristate "PNI RM3100 3-Axis Magnetometer (SPI)"
+	depends on SPI_MASTER
+	select SENSORS_RM3100
+	select REGMAP_SPI
+	help
+	  Say Y here to add support for the PNI RM3100 3-Axis Magnetometer.
+
+	  This driver can also be compiled as a module.
+	  To compile this driver as a module, choose M here: the module
+	  will be called rm3100-spi.
+
+config YAMAHA_YAS530
+	tristate "Yamaha YAS530 family of 3-Axis Magnetometers (I2C)"
+	depends on I2C
+	select REGMAP_I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Say Y here to add support for the Yamaha YAS530 series of
+	  3-Axis Magnetometers. YAS530, YAS532, YAS533 and YAS537 are
+	  supported.
+
+	  This driver can also be compiled as a module.
+	  To compile this driver as a module, choose M here: the module
+	  will be called yamaha-yas.
+
+endmenu