diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
commit | 2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch) | |
tree | 848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/input/keyboard/cap11xx.c | |
parent | Initial commit. (diff) | |
download | linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip |
Adding upstream version 6.1.76.upstream/6.1.76upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/input/keyboard/cap11xx.c')
-rw-r--r-- | drivers/input/keyboard/cap11xx.c | 513 |
1 files changed, 513 insertions, 0 deletions
diff --git a/drivers/input/keyboard/cap11xx.c b/drivers/input/keyboard/cap11xx.c new file mode 100644 index 000000000..7c85343cd --- /dev/null +++ b/drivers/input/keyboard/cap11xx.c @@ -0,0 +1,513 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Input driver for Microchip CAP11xx based capacitive touch sensors + * + * (c) 2014 Daniel Mack <linux@zonque.org> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/input.h> +#include <linux/leds.h> +#include <linux/of_irq.h> +#include <linux/regmap.h> +#include <linux/i2c.h> +#include <linux/gpio/consumer.h> + +#define CAP11XX_REG_MAIN_CONTROL 0x00 +#define CAP11XX_REG_MAIN_CONTROL_GAIN_SHIFT (6) +#define CAP11XX_REG_MAIN_CONTROL_GAIN_MASK (0xc0) +#define CAP11XX_REG_MAIN_CONTROL_DLSEEP BIT(4) +#define CAP11XX_REG_GENERAL_STATUS 0x02 +#define CAP11XX_REG_SENSOR_INPUT 0x03 +#define CAP11XX_REG_NOISE_FLAG_STATUS 0x0a +#define CAP11XX_REG_SENOR_DELTA(X) (0x10 + (X)) +#define CAP11XX_REG_SENSITIVITY_CONTROL 0x1f +#define CAP11XX_REG_CONFIG 0x20 +#define CAP11XX_REG_SENSOR_ENABLE 0x21 +#define CAP11XX_REG_SENSOR_CONFIG 0x22 +#define CAP11XX_REG_SENSOR_CONFIG2 0x23 +#define CAP11XX_REG_SAMPLING_CONFIG 0x24 +#define CAP11XX_REG_CALIBRATION 0x26 +#define CAP11XX_REG_INT_ENABLE 0x27 +#define CAP11XX_REG_REPEAT_RATE 0x28 +#define CAP11XX_REG_MT_CONFIG 0x2a +#define CAP11XX_REG_MT_PATTERN_CONFIG 0x2b +#define CAP11XX_REG_MT_PATTERN 0x2d +#define CAP11XX_REG_RECALIB_CONFIG 0x2f +#define CAP11XX_REG_SENSOR_THRESH(X) (0x30 + (X)) +#define CAP11XX_REG_SENSOR_NOISE_THRESH 0x38 +#define CAP11XX_REG_STANDBY_CHANNEL 0x40 +#define CAP11XX_REG_STANDBY_CONFIG 0x41 +#define CAP11XX_REG_STANDBY_SENSITIVITY 0x42 +#define CAP11XX_REG_STANDBY_THRESH 0x43 +#define CAP11XX_REG_CONFIG2 0x44 +#define CAP11XX_REG_CONFIG2_ALT_POL BIT(6) +#define CAP11XX_REG_SENSOR_BASE_CNT(X) (0x50 + (X)) +#define CAP11XX_REG_LED_POLARITY 0x73 +#define CAP11XX_REG_LED_OUTPUT_CONTROL 0x74 + +#define CAP11XX_REG_LED_DUTY_CYCLE_1 0x90 +#define CAP11XX_REG_LED_DUTY_CYCLE_2 0x91 +#define CAP11XX_REG_LED_DUTY_CYCLE_3 0x92 +#define CAP11XX_REG_LED_DUTY_CYCLE_4 0x93 + +#define CAP11XX_REG_LED_DUTY_MIN_MASK (0x0f) +#define CAP11XX_REG_LED_DUTY_MIN_MASK_SHIFT (0) +#define CAP11XX_REG_LED_DUTY_MAX_MASK (0xf0) +#define CAP11XX_REG_LED_DUTY_MAX_MASK_SHIFT (4) +#define CAP11XX_REG_LED_DUTY_MAX_VALUE (15) + +#define CAP11XX_REG_SENSOR_CALIB (0xb1 + (X)) +#define CAP11XX_REG_SENSOR_CALIB_LSB1 0xb9 +#define CAP11XX_REG_SENSOR_CALIB_LSB2 0xba +#define CAP11XX_REG_PRODUCT_ID 0xfd +#define CAP11XX_REG_MANUFACTURER_ID 0xfe +#define CAP11XX_REG_REVISION 0xff + +#define CAP11XX_MANUFACTURER_ID 0x5d + +#ifdef CONFIG_LEDS_CLASS +struct cap11xx_led { + struct cap11xx_priv *priv; + struct led_classdev cdev; + u32 reg; +}; +#endif + +struct cap11xx_priv { + struct regmap *regmap; + struct input_dev *idev; + + struct cap11xx_led *leds; + int num_leds; + + /* config */ + u32 keycodes[]; +}; + +struct cap11xx_hw_model { + u8 product_id; + unsigned int num_channels; + unsigned int num_leds; + bool no_gain; +}; + +enum { + CAP1106, + CAP1126, + CAP1188, + CAP1206, +}; + +static const struct cap11xx_hw_model cap11xx_devices[] = { + [CAP1106] = { .product_id = 0x55, .num_channels = 6, .num_leds = 0, .no_gain = false }, + [CAP1126] = { .product_id = 0x53, .num_channels = 6, .num_leds = 2, .no_gain = false }, + [CAP1188] = { .product_id = 0x50, .num_channels = 8, .num_leds = 8, .no_gain = false }, + [CAP1206] = { .product_id = 0x67, .num_channels = 6, .num_leds = 0, .no_gain = true }, +}; + +static const struct reg_default cap11xx_reg_defaults[] = { + { CAP11XX_REG_MAIN_CONTROL, 0x00 }, + { CAP11XX_REG_GENERAL_STATUS, 0x00 }, + { CAP11XX_REG_SENSOR_INPUT, 0x00 }, + { CAP11XX_REG_NOISE_FLAG_STATUS, 0x00 }, + { CAP11XX_REG_SENSITIVITY_CONTROL, 0x2f }, + { CAP11XX_REG_CONFIG, 0x20 }, + { CAP11XX_REG_SENSOR_ENABLE, 0x3f }, + { CAP11XX_REG_SENSOR_CONFIG, 0xa4 }, + { CAP11XX_REG_SENSOR_CONFIG2, 0x07 }, + { CAP11XX_REG_SAMPLING_CONFIG, 0x39 }, + { CAP11XX_REG_CALIBRATION, 0x00 }, + { CAP11XX_REG_INT_ENABLE, 0x3f }, + { CAP11XX_REG_REPEAT_RATE, 0x3f }, + { CAP11XX_REG_MT_CONFIG, 0x80 }, + { CAP11XX_REG_MT_PATTERN_CONFIG, 0x00 }, + { CAP11XX_REG_MT_PATTERN, 0x3f }, + { CAP11XX_REG_RECALIB_CONFIG, 0x8a }, + { CAP11XX_REG_SENSOR_THRESH(0), 0x40 }, + { CAP11XX_REG_SENSOR_THRESH(1), 0x40 }, + { CAP11XX_REG_SENSOR_THRESH(2), 0x40 }, + { CAP11XX_REG_SENSOR_THRESH(3), 0x40 }, + { CAP11XX_REG_SENSOR_THRESH(4), 0x40 }, + { CAP11XX_REG_SENSOR_THRESH(5), 0x40 }, + { CAP11XX_REG_SENSOR_NOISE_THRESH, 0x01 }, + { CAP11XX_REG_STANDBY_CHANNEL, 0x00 }, + { CAP11XX_REG_STANDBY_CONFIG, 0x39 }, + { CAP11XX_REG_STANDBY_SENSITIVITY, 0x02 }, + { CAP11XX_REG_STANDBY_THRESH, 0x40 }, + { CAP11XX_REG_CONFIG2, 0x40 }, + { CAP11XX_REG_LED_POLARITY, 0x00 }, + { CAP11XX_REG_SENSOR_CALIB_LSB1, 0x00 }, + { CAP11XX_REG_SENSOR_CALIB_LSB2, 0x00 }, +}; + +static bool cap11xx_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case CAP11XX_REG_MAIN_CONTROL: + case CAP11XX_REG_SENSOR_INPUT: + case CAP11XX_REG_SENOR_DELTA(0): + case CAP11XX_REG_SENOR_DELTA(1): + case CAP11XX_REG_SENOR_DELTA(2): + case CAP11XX_REG_SENOR_DELTA(3): + case CAP11XX_REG_SENOR_DELTA(4): + case CAP11XX_REG_SENOR_DELTA(5): + case CAP11XX_REG_PRODUCT_ID: + case CAP11XX_REG_MANUFACTURER_ID: + case CAP11XX_REG_REVISION: + return true; + } + + return false; +} + +static const struct regmap_config cap11xx_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = CAP11XX_REG_REVISION, + .reg_defaults = cap11xx_reg_defaults, + + .num_reg_defaults = ARRAY_SIZE(cap11xx_reg_defaults), + .cache_type = REGCACHE_RBTREE, + .volatile_reg = cap11xx_volatile_reg, +}; + +static irqreturn_t cap11xx_thread_func(int irq_num, void *data) +{ + struct cap11xx_priv *priv = data; + unsigned int status; + int ret, i; + + /* + * Deassert interrupt. This needs to be done before reading the status + * registers, which will not carry valid values otherwise. + */ + ret = regmap_update_bits(priv->regmap, CAP11XX_REG_MAIN_CONTROL, 1, 0); + if (ret < 0) + goto out; + + ret = regmap_read(priv->regmap, CAP11XX_REG_SENSOR_INPUT, &status); + if (ret < 0) + goto out; + + for (i = 0; i < priv->idev->keycodemax; i++) + input_report_key(priv->idev, priv->keycodes[i], + status & (1 << i)); + + input_sync(priv->idev); + +out: + return IRQ_HANDLED; +} + +static int cap11xx_set_sleep(struct cap11xx_priv *priv, bool sleep) +{ + /* + * DLSEEP mode will turn off all LEDS, prevent this + */ + if (IS_ENABLED(CONFIG_LEDS_CLASS) && priv->num_leds) + return 0; + + return regmap_update_bits(priv->regmap, CAP11XX_REG_MAIN_CONTROL, + CAP11XX_REG_MAIN_CONTROL_DLSEEP, + sleep ? CAP11XX_REG_MAIN_CONTROL_DLSEEP : 0); +} + +static int cap11xx_input_open(struct input_dev *idev) +{ + struct cap11xx_priv *priv = input_get_drvdata(idev); + + return cap11xx_set_sleep(priv, false); +} + +static void cap11xx_input_close(struct input_dev *idev) +{ + struct cap11xx_priv *priv = input_get_drvdata(idev); + + cap11xx_set_sleep(priv, true); +} + +#ifdef CONFIG_LEDS_CLASS +static int cap11xx_led_set(struct led_classdev *cdev, + enum led_brightness value) +{ + struct cap11xx_led *led = container_of(cdev, struct cap11xx_led, cdev); + struct cap11xx_priv *priv = led->priv; + + /* + * All LEDs share the same duty cycle as this is a HW + * limitation. Brightness levels per LED are either + * 0 (OFF) and 1 (ON). + */ + return regmap_update_bits(priv->regmap, + CAP11XX_REG_LED_OUTPUT_CONTROL, + BIT(led->reg), + value ? BIT(led->reg) : 0); +} + +static int cap11xx_init_leds(struct device *dev, + struct cap11xx_priv *priv, int num_leds) +{ + struct device_node *node = dev->of_node, *child; + struct cap11xx_led *led; + int cnt = of_get_child_count(node); + int error; + + if (!num_leds || !cnt) + return 0; + + if (cnt > num_leds) + return -EINVAL; + + led = devm_kcalloc(dev, cnt, sizeof(struct cap11xx_led), GFP_KERNEL); + if (!led) + return -ENOMEM; + + priv->leds = led; + + error = regmap_update_bits(priv->regmap, + CAP11XX_REG_LED_OUTPUT_CONTROL, 0xff, 0); + if (error) + return error; + + error = regmap_update_bits(priv->regmap, CAP11XX_REG_LED_DUTY_CYCLE_4, + CAP11XX_REG_LED_DUTY_MAX_MASK, + CAP11XX_REG_LED_DUTY_MAX_VALUE << + CAP11XX_REG_LED_DUTY_MAX_MASK_SHIFT); + if (error) + return error; + + for_each_child_of_node(node, child) { + u32 reg; + + led->cdev.name = + of_get_property(child, "label", NULL) ? : child->name; + led->cdev.default_trigger = + of_get_property(child, "linux,default-trigger", NULL); + led->cdev.flags = 0; + led->cdev.brightness_set_blocking = cap11xx_led_set; + led->cdev.max_brightness = 1; + led->cdev.brightness = LED_OFF; + + error = of_property_read_u32(child, "reg", ®); + if (error != 0 || reg >= num_leds) { + of_node_put(child); + return -EINVAL; + } + + led->reg = reg; + led->priv = priv; + + error = devm_led_classdev_register(dev, &led->cdev); + if (error) { + of_node_put(child); + return error; + } + + priv->num_leds++; + led++; + } + + return 0; +} +#else +static int cap11xx_init_leds(struct device *dev, + struct cap11xx_priv *priv, int num_leds) +{ + return 0; +} +#endif + +static int cap11xx_i2c_probe(struct i2c_client *i2c_client, + const struct i2c_device_id *id) +{ + struct device *dev = &i2c_client->dev; + struct cap11xx_priv *priv; + struct device_node *node; + const struct cap11xx_hw_model *cap; + int i, error, irq, gain = 0; + unsigned int val, rev; + u32 gain32; + + if (id->driver_data >= ARRAY_SIZE(cap11xx_devices)) { + dev_err(dev, "Invalid device ID %lu\n", id->driver_data); + return -EINVAL; + } + + cap = &cap11xx_devices[id->driver_data]; + if (!cap || !cap->num_channels) { + dev_err(dev, "Invalid device configuration\n"); + return -EINVAL; + } + + priv = devm_kzalloc(dev, + struct_size(priv, keycodes, cap->num_channels), + GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->regmap = devm_regmap_init_i2c(i2c_client, &cap11xx_regmap_config); + if (IS_ERR(priv->regmap)) + return PTR_ERR(priv->regmap); + + error = regmap_read(priv->regmap, CAP11XX_REG_PRODUCT_ID, &val); + if (error) + return error; + + if (val != cap->product_id) { + dev_err(dev, "Product ID: Got 0x%02x, expected 0x%02x\n", + val, cap->product_id); + return -ENXIO; + } + + error = regmap_read(priv->regmap, CAP11XX_REG_MANUFACTURER_ID, &val); + if (error) + return error; + + if (val != CAP11XX_MANUFACTURER_ID) { + dev_err(dev, "Manufacturer ID: Got 0x%02x, expected 0x%02x\n", + val, CAP11XX_MANUFACTURER_ID); + return -ENXIO; + } + + error = regmap_read(priv->regmap, CAP11XX_REG_REVISION, &rev); + if (error < 0) + return error; + + dev_info(dev, "CAP11XX detected, revision 0x%02x\n", rev); + node = dev->of_node; + + if (!of_property_read_u32(node, "microchip,sensor-gain", &gain32)) { + if (cap->no_gain) + dev_warn(dev, + "This version doesn't support sensor gain\n"); + else if (is_power_of_2(gain32) && gain32 <= 8) + gain = ilog2(gain32); + else + dev_err(dev, "Invalid sensor-gain value %d\n", gain32); + } + + if (id->driver_data != CAP1206) { + if (of_property_read_bool(node, "microchip,irq-active-high")) { + error = regmap_update_bits(priv->regmap, + CAP11XX_REG_CONFIG2, + CAP11XX_REG_CONFIG2_ALT_POL, + 0); + if (error) + return error; + } + } + + /* Provide some useful defaults */ + for (i = 0; i < cap->num_channels; i++) + priv->keycodes[i] = KEY_A + i; + + of_property_read_u32_array(node, "linux,keycodes", + priv->keycodes, cap->num_channels); + + if (!cap->no_gain) { + error = regmap_update_bits(priv->regmap, + CAP11XX_REG_MAIN_CONTROL, + CAP11XX_REG_MAIN_CONTROL_GAIN_MASK, + gain << CAP11XX_REG_MAIN_CONTROL_GAIN_SHIFT); + if (error) + return error; + } + + /* Disable autorepeat. The Linux input system has its own handling. */ + error = regmap_write(priv->regmap, CAP11XX_REG_REPEAT_RATE, 0); + if (error) + return error; + + priv->idev = devm_input_allocate_device(dev); + if (!priv->idev) + return -ENOMEM; + + priv->idev->name = "CAP11XX capacitive touch sensor"; + priv->idev->id.bustype = BUS_I2C; + priv->idev->evbit[0] = BIT_MASK(EV_KEY); + + if (of_property_read_bool(node, "autorepeat")) + __set_bit(EV_REP, priv->idev->evbit); + + for (i = 0; i < cap->num_channels; i++) + __set_bit(priv->keycodes[i], priv->idev->keybit); + + __clear_bit(KEY_RESERVED, priv->idev->keybit); + + priv->idev->keycode = priv->keycodes; + priv->idev->keycodesize = sizeof(priv->keycodes[0]); + priv->idev->keycodemax = cap->num_channels; + + priv->idev->id.vendor = CAP11XX_MANUFACTURER_ID; + priv->idev->id.product = cap->product_id; + priv->idev->id.version = rev; + + priv->idev->open = cap11xx_input_open; + priv->idev->close = cap11xx_input_close; + + error = cap11xx_init_leds(dev, priv, cap->num_leds); + if (error) + return error; + + input_set_drvdata(priv->idev, priv); + + /* + * Put the device in deep sleep mode for now. + * ->open() will bring it back once the it is actually needed. + */ + cap11xx_set_sleep(priv, true); + + error = input_register_device(priv->idev); + if (error) + return error; + + irq = irq_of_parse_and_map(node, 0); + if (!irq) { + dev_err(dev, "Unable to parse or map IRQ\n"); + return -ENXIO; + } + + error = devm_request_threaded_irq(dev, irq, NULL, cap11xx_thread_func, + IRQF_ONESHOT, dev_name(dev), priv); + if (error) + return error; + + return 0; +} + +static const struct of_device_id cap11xx_dt_ids[] = { + { .compatible = "microchip,cap1106", }, + { .compatible = "microchip,cap1126", }, + { .compatible = "microchip,cap1188", }, + { .compatible = "microchip,cap1206", }, + {} +}; +MODULE_DEVICE_TABLE(of, cap11xx_dt_ids); + +static const struct i2c_device_id cap11xx_i2c_ids[] = { + { "cap1106", CAP1106 }, + { "cap1126", CAP1126 }, + { "cap1188", CAP1188 }, + { "cap1206", CAP1206 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, cap11xx_i2c_ids); + +static struct i2c_driver cap11xx_i2c_driver = { + .driver = { + .name = "cap11xx", + .of_match_table = cap11xx_dt_ids, + }, + .id_table = cap11xx_i2c_ids, + .probe = cap11xx_i2c_probe, +}; + +module_i2c_driver(cap11xx_i2c_driver); + +MODULE_DESCRIPTION("Microchip CAP11XX driver"); +MODULE_AUTHOR("Daniel Mack <linux@zonque.org>"); +MODULE_LICENSE("GPL v2"); |