summaryrefslogtreecommitdiffstats
path: root/drivers/input/misc/keyspan_remote.c
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
commit2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch)
tree848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/input/misc/keyspan_remote.c
parentInitial commit. (diff)
downloadlinux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz
linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip
Adding upstream version 6.1.76.upstream/6.1.76upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/input/misc/keyspan_remote.c')
-rw-r--r--drivers/input/misc/keyspan_remote.c590
1 files changed, 590 insertions, 0 deletions
diff --git a/drivers/input/misc/keyspan_remote.c b/drivers/input/misc/keyspan_remote.c
new file mode 100644
index 000000000..bee4b1376
--- /dev/null
+++ b/drivers/input/misc/keyspan_remote.c
@@ -0,0 +1,590 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * keyspan_remote: USB driver for the Keyspan DMR
+ *
+ * Copyright (C) 2005 Zymeta Corporation - Michael Downey (downey@zymeta.com)
+ *
+ * This driver has been put together with the support of Innosys, Inc.
+ * and Keyspan, Inc the manufacturers of the Keyspan USB DMR product.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/usb/input.h>
+
+/* Parameters that can be passed to the driver. */
+static int debug;
+module_param(debug, int, 0444);
+MODULE_PARM_DESC(debug, "Enable extra debug messages and information");
+
+/* Vendor and product ids */
+#define USB_KEYSPAN_VENDOR_ID 0x06CD
+#define USB_KEYSPAN_PRODUCT_UIA11 0x0202
+
+/* Defines for converting the data from the remote. */
+#define ZERO 0x18
+#define ZERO_MASK 0x1F /* 5 bits for a 0 */
+#define ONE 0x3C
+#define ONE_MASK 0x3F /* 6 bits for a 1 */
+#define SYNC 0x3F80
+#define SYNC_MASK 0x3FFF /* 14 bits for a SYNC sequence */
+#define STOP 0x00
+#define STOP_MASK 0x1F /* 5 bits for the STOP sequence */
+#define GAP 0xFF
+
+#define RECV_SIZE 8 /* The UIA-11 type have a 8 byte limit. */
+
+/*
+ * Table that maps the 31 possible keycodes to input keys.
+ * Currently there are 15 and 17 button models so RESERVED codes
+ * are blank areas in the mapping.
+ */
+static const unsigned short keyspan_key_table[] = {
+ KEY_RESERVED, /* 0 is just a place holder. */
+ KEY_RESERVED,
+ KEY_STOP,
+ KEY_PLAYCD,
+ KEY_RESERVED,
+ KEY_PREVIOUSSONG,
+ KEY_REWIND,
+ KEY_FORWARD,
+ KEY_NEXTSONG,
+ KEY_RESERVED,
+ KEY_RESERVED,
+ KEY_RESERVED,
+ KEY_PAUSE,
+ KEY_VOLUMEUP,
+ KEY_RESERVED,
+ KEY_RESERVED,
+ KEY_RESERVED,
+ KEY_VOLUMEDOWN,
+ KEY_RESERVED,
+ KEY_UP,
+ KEY_RESERVED,
+ KEY_MUTE,
+ KEY_LEFT,
+ KEY_ENTER,
+ KEY_RIGHT,
+ KEY_RESERVED,
+ KEY_RESERVED,
+ KEY_DOWN,
+ KEY_RESERVED,
+ KEY_KPASTERISK,
+ KEY_RESERVED,
+ KEY_MENU
+};
+
+/* table of devices that work with this driver */
+static const struct usb_device_id keyspan_table[] = {
+ { USB_DEVICE(USB_KEYSPAN_VENDOR_ID, USB_KEYSPAN_PRODUCT_UIA11) },
+ { } /* Terminating entry */
+};
+
+/* Structure to store all the real stuff that a remote sends to us. */
+struct keyspan_message {
+ u16 system;
+ u8 button;
+ u8 toggle;
+};
+
+/* Structure used for all the bit testing magic needed to be done. */
+struct bit_tester {
+ u32 tester;
+ int len;
+ int pos;
+ int bits_left;
+ u8 buffer[32];
+};
+
+/* Structure to hold all of our driver specific stuff */
+struct usb_keyspan {
+ char name[128];
+ char phys[64];
+ unsigned short keymap[ARRAY_SIZE(keyspan_key_table)];
+ struct usb_device *udev;
+ struct input_dev *input;
+ struct usb_interface *interface;
+ struct usb_endpoint_descriptor *in_endpoint;
+ struct urb* irq_urb;
+ int open;
+ dma_addr_t in_dma;
+ unsigned char *in_buffer;
+
+ /* variables used to parse messages from remote. */
+ struct bit_tester data;
+ int stage;
+ int toggle;
+};
+
+static struct usb_driver keyspan_driver;
+
+/*
+ * Debug routine that prints out what we've received from the remote.
+ */
+static void keyspan_print(struct usb_keyspan* dev) /*unsigned char* data)*/
+{
+ char codes[4 * RECV_SIZE];
+ int i;
+
+ for (i = 0; i < RECV_SIZE; i++)
+ snprintf(codes + i * 3, 4, "%02x ", dev->in_buffer[i]);
+
+ dev_info(&dev->udev->dev, "%s\n", codes);
+}
+
+/*
+ * Routine that manages the bit_tester structure. It makes sure that there are
+ * at least bits_needed bits loaded into the tester.
+ */
+static int keyspan_load_tester(struct usb_keyspan* dev, int bits_needed)
+{
+ if (dev->data.bits_left >= bits_needed)
+ return 0;
+
+ /*
+ * Somehow we've missed the last message. The message will be repeated
+ * though so it's not too big a deal
+ */
+ if (dev->data.pos >= dev->data.len) {
+ dev_dbg(&dev->interface->dev,
+ "%s - Error ran out of data. pos: %d, len: %d\n",
+ __func__, dev->data.pos, dev->data.len);
+ return -1;
+ }
+
+ /* Load as much as we can into the tester. */
+ while ((dev->data.bits_left + 7 < (sizeof(dev->data.tester) * 8)) &&
+ (dev->data.pos < dev->data.len)) {
+ dev->data.tester += (dev->data.buffer[dev->data.pos++] << dev->data.bits_left);
+ dev->data.bits_left += 8;
+ }
+
+ return 0;
+}
+
+static void keyspan_report_button(struct usb_keyspan *remote, int button, int press)
+{
+ struct input_dev *input = remote->input;
+
+ input_event(input, EV_MSC, MSC_SCAN, button);
+ input_report_key(input, remote->keymap[button], press);
+ input_sync(input);
+}
+
+/*
+ * Routine that handles all the logic needed to parse out the message from the remote.
+ */
+static void keyspan_check_data(struct usb_keyspan *remote)
+{
+ int i;
+ int found = 0;
+ struct keyspan_message message;
+
+ switch(remote->stage) {
+ case 0:
+ /*
+ * In stage 0 we want to find the start of a message. The remote sends a 0xFF as filler.
+ * So the first byte that isn't a FF should be the start of a new message.
+ */
+ for (i = 0; i < RECV_SIZE && remote->in_buffer[i] == GAP; ++i);
+
+ if (i < RECV_SIZE) {
+ memcpy(remote->data.buffer, remote->in_buffer, RECV_SIZE);
+ remote->data.len = RECV_SIZE;
+ remote->data.pos = 0;
+ remote->data.tester = 0;
+ remote->data.bits_left = 0;
+ remote->stage = 1;
+ }
+ break;
+
+ case 1:
+ /*
+ * Stage 1 we should have 16 bytes and should be able to detect a
+ * SYNC. The SYNC is 14 bits, 7 0's and then 7 1's.
+ */
+ memcpy(remote->data.buffer + remote->data.len, remote->in_buffer, RECV_SIZE);
+ remote->data.len += RECV_SIZE;
+
+ found = 0;
+ while ((remote->data.bits_left >= 14 || remote->data.pos < remote->data.len) && !found) {
+ for (i = 0; i < 8; ++i) {
+ if (keyspan_load_tester(remote, 14) != 0) {
+ remote->stage = 0;
+ return;
+ }
+
+ if ((remote->data.tester & SYNC_MASK) == SYNC) {
+ remote->data.tester = remote->data.tester >> 14;
+ remote->data.bits_left -= 14;
+ found = 1;
+ break;
+ } else {
+ remote->data.tester = remote->data.tester >> 1;
+ --remote->data.bits_left;
+ }
+ }
+ }
+
+ if (!found) {
+ remote->stage = 0;
+ remote->data.len = 0;
+ } else {
+ remote->stage = 2;
+ }
+ break;
+
+ case 2:
+ /*
+ * Stage 2 we should have 24 bytes which will be enough for a full
+ * message. We need to parse out the system code, button code,
+ * toggle code, and stop.
+ */
+ memcpy(remote->data.buffer + remote->data.len, remote->in_buffer, RECV_SIZE);
+ remote->data.len += RECV_SIZE;
+
+ message.system = 0;
+ for (i = 0; i < 9; i++) {
+ keyspan_load_tester(remote, 6);
+
+ if ((remote->data.tester & ZERO_MASK) == ZERO) {
+ message.system = message.system << 1;
+ remote->data.tester = remote->data.tester >> 5;
+ remote->data.bits_left -= 5;
+ } else if ((remote->data.tester & ONE_MASK) == ONE) {
+ message.system = (message.system << 1) + 1;
+ remote->data.tester = remote->data.tester >> 6;
+ remote->data.bits_left -= 6;
+ } else {
+ dev_err(&remote->interface->dev,
+ "%s - Unknown sequence found in system data.\n",
+ __func__);
+ remote->stage = 0;
+ return;
+ }
+ }
+
+ message.button = 0;
+ for (i = 0; i < 5; i++) {
+ keyspan_load_tester(remote, 6);
+
+ if ((remote->data.tester & ZERO_MASK) == ZERO) {
+ message.button = message.button << 1;
+ remote->data.tester = remote->data.tester >> 5;
+ remote->data.bits_left -= 5;
+ } else if ((remote->data.tester & ONE_MASK) == ONE) {
+ message.button = (message.button << 1) + 1;
+ remote->data.tester = remote->data.tester >> 6;
+ remote->data.bits_left -= 6;
+ } else {
+ dev_err(&remote->interface->dev,
+ "%s - Unknown sequence found in button data.\n",
+ __func__);
+ remote->stage = 0;
+ return;
+ }
+ }
+
+ keyspan_load_tester(remote, 6);
+ if ((remote->data.tester & ZERO_MASK) == ZERO) {
+ message.toggle = 0;
+ remote->data.tester = remote->data.tester >> 5;
+ remote->data.bits_left -= 5;
+ } else if ((remote->data.tester & ONE_MASK) == ONE) {
+ message.toggle = 1;
+ remote->data.tester = remote->data.tester >> 6;
+ remote->data.bits_left -= 6;
+ } else {
+ dev_err(&remote->interface->dev,
+ "%s - Error in message, invalid toggle.\n",
+ __func__);
+ remote->stage = 0;
+ return;
+ }
+
+ keyspan_load_tester(remote, 5);
+ if ((remote->data.tester & STOP_MASK) == STOP) {
+ remote->data.tester = remote->data.tester >> 5;
+ remote->data.bits_left -= 5;
+ } else {
+ dev_err(&remote->interface->dev,
+ "Bad message received, no stop bit found.\n");
+ }
+
+ dev_dbg(&remote->interface->dev,
+ "%s found valid message: system: %d, button: %d, toggle: %d\n",
+ __func__, message.system, message.button, message.toggle);
+
+ if (message.toggle != remote->toggle) {
+ keyspan_report_button(remote, message.button, 1);
+ keyspan_report_button(remote, message.button, 0);
+ remote->toggle = message.toggle;
+ }
+
+ remote->stage = 0;
+ break;
+ }
+}
+
+/*
+ * Routine for sending all the initialization messages to the remote.
+ */
+static int keyspan_setup(struct usb_device* dev)
+{
+ int retval = 0;
+
+ retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+ 0x11, 0x40, 0x5601, 0x0, NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
+ if (retval) {
+ dev_dbg(&dev->dev, "%s - failed to set bit rate due to error: %d\n",
+ __func__, retval);
+ return(retval);
+ }
+
+ retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+ 0x44, 0x40, 0x0, 0x0, NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
+ if (retval) {
+ dev_dbg(&dev->dev, "%s - failed to set resume sensitivity due to error: %d\n",
+ __func__, retval);
+ return(retval);
+ }
+
+ retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+ 0x22, 0x40, 0x0, 0x0, NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
+ if (retval) {
+ dev_dbg(&dev->dev, "%s - failed to turn receive on due to error: %d\n",
+ __func__, retval);
+ return(retval);
+ }
+
+ dev_dbg(&dev->dev, "%s - Setup complete.\n", __func__);
+ return(retval);
+}
+
+/*
+ * Routine used to handle a new message that has come in.
+ */
+static void keyspan_irq_recv(struct urb *urb)
+{
+ struct usb_keyspan *dev = urb->context;
+ int retval;
+
+ /* Check our status in case we need to bail out early. */
+ switch (urb->status) {
+ case 0:
+ break;
+
+ /* Device went away so don't keep trying to read from it. */
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ return;
+
+ default:
+ goto resubmit;
+ }
+
+ if (debug)
+ keyspan_print(dev);
+
+ keyspan_check_data(dev);
+
+resubmit:
+ retval = usb_submit_urb(urb, GFP_ATOMIC);
+ if (retval)
+ dev_err(&dev->interface->dev,
+ "%s - usb_submit_urb failed with result: %d\n",
+ __func__, retval);
+}
+
+static int keyspan_open(struct input_dev *dev)
+{
+ struct usb_keyspan *remote = input_get_drvdata(dev);
+
+ remote->irq_urb->dev = remote->udev;
+ if (usb_submit_urb(remote->irq_urb, GFP_KERNEL))
+ return -EIO;
+
+ return 0;
+}
+
+static void keyspan_close(struct input_dev *dev)
+{
+ struct usb_keyspan *remote = input_get_drvdata(dev);
+
+ usb_kill_urb(remote->irq_urb);
+}
+
+static struct usb_endpoint_descriptor *keyspan_get_in_endpoint(struct usb_host_interface *iface)
+{
+
+ struct usb_endpoint_descriptor *endpoint;
+ int i;
+
+ for (i = 0; i < iface->desc.bNumEndpoints; ++i) {
+ endpoint = &iface->endpoint[i].desc;
+
+ if (usb_endpoint_is_int_in(endpoint)) {
+ /* we found our interrupt in endpoint */
+ return endpoint;
+ }
+ }
+
+ return NULL;
+}
+
+/*
+ * Routine that sets up the driver to handle a specific USB device detected on the bus.
+ */
+static int keyspan_probe(struct usb_interface *interface, const struct usb_device_id *id)
+{
+ struct usb_device *udev = interface_to_usbdev(interface);
+ struct usb_endpoint_descriptor *endpoint;
+ struct usb_keyspan *remote;
+ struct input_dev *input_dev;
+ int i, error;
+
+ endpoint = keyspan_get_in_endpoint(interface->cur_altsetting);
+ if (!endpoint)
+ return -ENODEV;
+
+ remote = kzalloc(sizeof(*remote), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!remote || !input_dev) {
+ error = -ENOMEM;
+ goto fail1;
+ }
+
+ remote->udev = udev;
+ remote->input = input_dev;
+ remote->interface = interface;
+ remote->in_endpoint = endpoint;
+ remote->toggle = -1; /* Set to -1 so we will always not match the toggle from the first remote message. */
+
+ remote->in_buffer = usb_alloc_coherent(udev, RECV_SIZE, GFP_KERNEL, &remote->in_dma);
+ if (!remote->in_buffer) {
+ error = -ENOMEM;
+ goto fail1;
+ }
+
+ remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!remote->irq_urb) {
+ error = -ENOMEM;
+ goto fail2;
+ }
+
+ error = keyspan_setup(udev);
+ if (error) {
+ error = -ENODEV;
+ goto fail3;
+ }
+
+ if (udev->manufacturer)
+ strscpy(remote->name, udev->manufacturer, sizeof(remote->name));
+
+ if (udev->product) {
+ if (udev->manufacturer)
+ strlcat(remote->name, " ", sizeof(remote->name));
+ strlcat(remote->name, udev->product, sizeof(remote->name));
+ }
+
+ if (!strlen(remote->name))
+ snprintf(remote->name, sizeof(remote->name),
+ "USB Keyspan Remote %04x:%04x",
+ le16_to_cpu(udev->descriptor.idVendor),
+ le16_to_cpu(udev->descriptor.idProduct));
+
+ usb_make_path(udev, remote->phys, sizeof(remote->phys));
+ strlcat(remote->phys, "/input0", sizeof(remote->phys));
+ memcpy(remote->keymap, keyspan_key_table, sizeof(remote->keymap));
+
+ input_dev->name = remote->name;
+ input_dev->phys = remote->phys;
+ usb_to_input_id(udev, &input_dev->id);
+ input_dev->dev.parent = &interface->dev;
+ input_dev->keycode = remote->keymap;
+ input_dev->keycodesize = sizeof(unsigned short);
+ input_dev->keycodemax = ARRAY_SIZE(remote->keymap);
+
+ input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+ __set_bit(EV_KEY, input_dev->evbit);
+ for (i = 0; i < ARRAY_SIZE(keyspan_key_table); i++)
+ __set_bit(keyspan_key_table[i], input_dev->keybit);
+ __clear_bit(KEY_RESERVED, input_dev->keybit);
+
+ input_set_drvdata(input_dev, remote);
+
+ input_dev->open = keyspan_open;
+ input_dev->close = keyspan_close;
+
+ /*
+ * Initialize the URB to access the device.
+ * The urb gets sent to the device in keyspan_open()
+ */
+ usb_fill_int_urb(remote->irq_urb,
+ remote->udev,
+ usb_rcvintpipe(remote->udev, endpoint->bEndpointAddress),
+ remote->in_buffer, RECV_SIZE, keyspan_irq_recv, remote,
+ endpoint->bInterval);
+ remote->irq_urb->transfer_dma = remote->in_dma;
+ remote->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ /* we can register the device now, as it is ready */
+ error = input_register_device(remote->input);
+ if (error)
+ goto fail3;
+
+ /* save our data pointer in this interface device */
+ usb_set_intfdata(interface, remote);
+
+ return 0;
+
+ fail3: usb_free_urb(remote->irq_urb);
+ fail2: usb_free_coherent(udev, RECV_SIZE, remote->in_buffer, remote->in_dma);
+ fail1: kfree(remote);
+ input_free_device(input_dev);
+
+ return error;
+}
+
+/*
+ * Routine called when a device is disconnected from the USB.
+ */
+static void keyspan_disconnect(struct usb_interface *interface)
+{
+ struct usb_keyspan *remote;
+
+ remote = usb_get_intfdata(interface);
+ usb_set_intfdata(interface, NULL);
+
+ if (remote) { /* We have a valid driver structure so clean up everything we allocated. */
+ input_unregister_device(remote->input);
+ usb_kill_urb(remote->irq_urb);
+ usb_free_urb(remote->irq_urb);
+ usb_free_coherent(remote->udev, RECV_SIZE, remote->in_buffer, remote->in_dma);
+ kfree(remote);
+ }
+}
+
+/*
+ * Standard driver set up sections
+ */
+static struct usb_driver keyspan_driver =
+{
+ .name = "keyspan_remote",
+ .probe = keyspan_probe,
+ .disconnect = keyspan_disconnect,
+ .id_table = keyspan_table
+};
+
+module_usb_driver(keyspan_driver);
+
+MODULE_DEVICE_TABLE(usb, keyspan_table);
+MODULE_AUTHOR("Michael Downey <downey@zymeta.com>");
+MODULE_DESCRIPTION("Driver for the USB Keyspan remote control.");
+MODULE_LICENSE("GPL");