summaryrefslogtreecommitdiffstats
path: root/drivers/input/serio/hp_sdc.c
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
commit2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch)
tree848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/input/serio/hp_sdc.c
parentInitial commit. (diff)
downloadlinux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz
linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip
Adding upstream version 6.1.76.upstream/6.1.76upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/input/serio/hp_sdc.c')
-rw-r--r--drivers/input/serio/hp_sdc.c1127
1 files changed, 1127 insertions, 0 deletions
diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c
new file mode 100644
index 000000000..13eacf6ab
--- /dev/null
+++ b/drivers/input/serio/hp_sdc.c
@@ -0,0 +1,1127 @@
+/*
+ * HP i8042-based System Device Controller driver.
+ *
+ * Copyright (c) 2001 Brian S. Julin
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL").
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ *
+ * References:
+ * System Device Controller Microprocessor Firmware Theory of Operation
+ * for Part Number 1820-4784 Revision B. Dwg No. A-1820-4784-2
+ * Helge Deller's original hilkbd.c port for PA-RISC.
+ *
+ *
+ * Driver theory of operation:
+ *
+ * hp_sdc_put does all writing to the SDC. ISR can run on a different
+ * CPU than hp_sdc_put, but only one CPU runs hp_sdc_put at a time
+ * (it cannot really benefit from SMP anyway.) A tasket fit this perfectly.
+ *
+ * All data coming back from the SDC is sent via interrupt and can be read
+ * fully in the ISR, so there are no latency/throughput problems there.
+ * The problem is with output, due to the slow clock speed of the SDC
+ * compared to the CPU. This should not be too horrible most of the time,
+ * but if used with HIL devices that support the multibyte transfer command,
+ * keeping outbound throughput flowing at the 6500KBps that the HIL is
+ * capable of is more than can be done at HZ=100.
+ *
+ * Busy polling for IBF clear wastes CPU cycles and bus cycles. hp_sdc.ibf
+ * is set to 0 when the IBF flag in the status register has cleared. ISR
+ * may do this, and may also access the parts of queued transactions related
+ * to reading data back from the SDC, but otherwise will not touch the
+ * hp_sdc state. Whenever a register is written hp_sdc.ibf is set to 1.
+ *
+ * The i8042 write index and the values in the 4-byte input buffer
+ * starting at 0x70 are kept track of in hp_sdc.wi, and .r7[], respectively,
+ * to minimize the amount of IO needed to the SDC. However these values
+ * do not need to be locked since they are only ever accessed by hp_sdc_put.
+ *
+ * A timer task schedules the tasklet once per second just to make
+ * sure it doesn't freeze up and to allow for bad reads to time out.
+ */
+
+#include <linux/hp_sdc.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/time.h>
+#include <linux/semaphore.h>
+#include <linux/slab.h>
+#include <linux/hil.h>
+#include <asm/io.h>
+
+/* Machine-specific abstraction */
+
+#if defined(__hppa__)
+# include <asm/parisc-device.h>
+# define sdc_readb(p) gsc_readb(p)
+# define sdc_writeb(v,p) gsc_writeb((v),(p))
+#elif defined(__mc68000__)
+#include <linux/uaccess.h>
+# define sdc_readb(p) in_8(p)
+# define sdc_writeb(v,p) out_8((p),(v))
+#else
+# error "HIL is not supported on this platform"
+#endif
+
+#define PREFIX "HP SDC: "
+
+MODULE_AUTHOR("Brian S. Julin <bri@calyx.com>");
+MODULE_DESCRIPTION("HP i8042-based SDC Driver");
+MODULE_LICENSE("Dual BSD/GPL");
+
+EXPORT_SYMBOL(hp_sdc_request_timer_irq);
+EXPORT_SYMBOL(hp_sdc_request_hil_irq);
+EXPORT_SYMBOL(hp_sdc_request_cooked_irq);
+
+EXPORT_SYMBOL(hp_sdc_release_timer_irq);
+EXPORT_SYMBOL(hp_sdc_release_hil_irq);
+EXPORT_SYMBOL(hp_sdc_release_cooked_irq);
+
+EXPORT_SYMBOL(__hp_sdc_enqueue_transaction);
+EXPORT_SYMBOL(hp_sdc_enqueue_transaction);
+EXPORT_SYMBOL(hp_sdc_dequeue_transaction);
+
+static bool hp_sdc_disabled;
+module_param_named(no_hpsdc, hp_sdc_disabled, bool, 0);
+MODULE_PARM_DESC(no_hpsdc, "Do not enable HP SDC driver.");
+
+static hp_i8042_sdc hp_sdc; /* All driver state is kept in here. */
+
+/*************** primitives for use in any context *********************/
+static inline uint8_t hp_sdc_status_in8(void)
+{
+ uint8_t status;
+ unsigned long flags;
+
+ write_lock_irqsave(&hp_sdc.ibf_lock, flags);
+ status = sdc_readb(hp_sdc.status_io);
+ if (!(status & HP_SDC_STATUS_IBF))
+ hp_sdc.ibf = 0;
+ write_unlock_irqrestore(&hp_sdc.ibf_lock, flags);
+
+ return status;
+}
+
+static inline uint8_t hp_sdc_data_in8(void)
+{
+ return sdc_readb(hp_sdc.data_io);
+}
+
+static inline void hp_sdc_status_out8(uint8_t val)
+{
+ unsigned long flags;
+
+ write_lock_irqsave(&hp_sdc.ibf_lock, flags);
+ hp_sdc.ibf = 1;
+ if ((val & 0xf0) == 0xe0)
+ hp_sdc.wi = 0xff;
+ sdc_writeb(val, hp_sdc.status_io);
+ write_unlock_irqrestore(&hp_sdc.ibf_lock, flags);
+}
+
+static inline void hp_sdc_data_out8(uint8_t val)
+{
+ unsigned long flags;
+
+ write_lock_irqsave(&hp_sdc.ibf_lock, flags);
+ hp_sdc.ibf = 1;
+ sdc_writeb(val, hp_sdc.data_io);
+ write_unlock_irqrestore(&hp_sdc.ibf_lock, flags);
+}
+
+/* Care must be taken to only invoke hp_sdc_spin_ibf when
+ * absolutely needed, or in rarely invoked subroutines.
+ * Not only does it waste CPU cycles, it also wastes bus cycles.
+ */
+static inline void hp_sdc_spin_ibf(void)
+{
+ unsigned long flags;
+ rwlock_t *lock;
+
+ lock = &hp_sdc.ibf_lock;
+
+ read_lock_irqsave(lock, flags);
+ if (!hp_sdc.ibf) {
+ read_unlock_irqrestore(lock, flags);
+ return;
+ }
+ read_unlock(lock);
+ write_lock(lock);
+ while (sdc_readb(hp_sdc.status_io) & HP_SDC_STATUS_IBF)
+ { }
+ hp_sdc.ibf = 0;
+ write_unlock_irqrestore(lock, flags);
+}
+
+
+/************************ Interrupt context functions ************************/
+static void hp_sdc_take(int irq, void *dev_id, uint8_t status, uint8_t data)
+{
+ hp_sdc_transaction *curr;
+
+ read_lock(&hp_sdc.rtq_lock);
+ if (hp_sdc.rcurr < 0) {
+ read_unlock(&hp_sdc.rtq_lock);
+ return;
+ }
+ curr = hp_sdc.tq[hp_sdc.rcurr];
+ read_unlock(&hp_sdc.rtq_lock);
+
+ curr->seq[curr->idx++] = status;
+ curr->seq[curr->idx++] = data;
+ hp_sdc.rqty -= 2;
+ hp_sdc.rtime = ktime_get();
+
+ if (hp_sdc.rqty <= 0) {
+ /* All data has been gathered. */
+ if (curr->seq[curr->actidx] & HP_SDC_ACT_SEMAPHORE)
+ if (curr->act.semaphore)
+ up(curr->act.semaphore);
+
+ if (curr->seq[curr->actidx] & HP_SDC_ACT_CALLBACK)
+ if (curr->act.irqhook)
+ curr->act.irqhook(irq, dev_id, status, data);
+
+ curr->actidx = curr->idx;
+ curr->idx++;
+ /* Return control of this transaction */
+ write_lock(&hp_sdc.rtq_lock);
+ hp_sdc.rcurr = -1;
+ hp_sdc.rqty = 0;
+ write_unlock(&hp_sdc.rtq_lock);
+ tasklet_schedule(&hp_sdc.task);
+ }
+}
+
+static irqreturn_t hp_sdc_isr(int irq, void *dev_id)
+{
+ uint8_t status, data;
+
+ status = hp_sdc_status_in8();
+ /* Read data unconditionally to advance i8042. */
+ data = hp_sdc_data_in8();
+
+ /* For now we are ignoring these until we get the SDC to behave. */
+ if (((status & 0xf1) == 0x51) && data == 0x82)
+ return IRQ_HANDLED;
+
+ switch (status & HP_SDC_STATUS_IRQMASK) {
+ case 0: /* This case is not documented. */
+ break;
+
+ case HP_SDC_STATUS_USERTIMER:
+ case HP_SDC_STATUS_PERIODIC:
+ case HP_SDC_STATUS_TIMER:
+ read_lock(&hp_sdc.hook_lock);
+ if (hp_sdc.timer != NULL)
+ hp_sdc.timer(irq, dev_id, status, data);
+ read_unlock(&hp_sdc.hook_lock);
+ break;
+
+ case HP_SDC_STATUS_REG:
+ hp_sdc_take(irq, dev_id, status, data);
+ break;
+
+ case HP_SDC_STATUS_HILCMD:
+ case HP_SDC_STATUS_HILDATA:
+ read_lock(&hp_sdc.hook_lock);
+ if (hp_sdc.hil != NULL)
+ hp_sdc.hil(irq, dev_id, status, data);
+ read_unlock(&hp_sdc.hook_lock);
+ break;
+
+ case HP_SDC_STATUS_PUP:
+ read_lock(&hp_sdc.hook_lock);
+ if (hp_sdc.pup != NULL)
+ hp_sdc.pup(irq, dev_id, status, data);
+ else
+ printk(KERN_INFO PREFIX "HP SDC reports successful PUP.\n");
+ read_unlock(&hp_sdc.hook_lock);
+ break;
+
+ default:
+ read_lock(&hp_sdc.hook_lock);
+ if (hp_sdc.cooked != NULL)
+ hp_sdc.cooked(irq, dev_id, status, data);
+ read_unlock(&hp_sdc.hook_lock);
+ break;
+ }
+
+ return IRQ_HANDLED;
+}
+
+
+static irqreturn_t hp_sdc_nmisr(int irq, void *dev_id)
+{
+ int status;
+
+ status = hp_sdc_status_in8();
+ printk(KERN_WARNING PREFIX "NMI !\n");
+
+#if 0
+ if (status & HP_SDC_NMISTATUS_FHS) {
+ read_lock(&hp_sdc.hook_lock);
+ if (hp_sdc.timer != NULL)
+ hp_sdc.timer(irq, dev_id, status, 0);
+ read_unlock(&hp_sdc.hook_lock);
+ } else {
+ /* TODO: pass this on to the HIL handler, or do SAK here? */
+ printk(KERN_WARNING PREFIX "HIL NMI\n");
+ }
+#endif
+
+ return IRQ_HANDLED;
+}
+
+
+/***************** Kernel (tasklet) context functions ****************/
+
+unsigned long hp_sdc_put(void);
+
+static void hp_sdc_tasklet(unsigned long foo)
+{
+ write_lock_irq(&hp_sdc.rtq_lock);
+
+ if (hp_sdc.rcurr >= 0) {
+ ktime_t now = ktime_get();
+
+ if (ktime_after(now, ktime_add_us(hp_sdc.rtime,
+ HP_SDC_MAX_REG_DELAY))) {
+ hp_sdc_transaction *curr;
+ uint8_t tmp;
+
+ curr = hp_sdc.tq[hp_sdc.rcurr];
+ /* If this turns out to be a normal failure mode
+ * we'll need to figure out a way to communicate
+ * it back to the application. and be less verbose.
+ */
+ printk(KERN_WARNING PREFIX "read timeout (%lldus)!\n",
+ ktime_us_delta(now, hp_sdc.rtime));
+ curr->idx += hp_sdc.rqty;
+ hp_sdc.rqty = 0;
+ tmp = curr->seq[curr->actidx];
+ curr->seq[curr->actidx] |= HP_SDC_ACT_DEAD;
+ if (tmp & HP_SDC_ACT_SEMAPHORE)
+ if (curr->act.semaphore)
+ up(curr->act.semaphore);
+
+ if (tmp & HP_SDC_ACT_CALLBACK) {
+ /* Note this means that irqhooks may be called
+ * in tasklet/bh context.
+ */
+ if (curr->act.irqhook)
+ curr->act.irqhook(0, NULL, 0, 0);
+ }
+
+ curr->actidx = curr->idx;
+ curr->idx++;
+ hp_sdc.rcurr = -1;
+ }
+ }
+ write_unlock_irq(&hp_sdc.rtq_lock);
+ hp_sdc_put();
+}
+
+unsigned long hp_sdc_put(void)
+{
+ hp_sdc_transaction *curr;
+ uint8_t act;
+ int idx, curridx;
+
+ int limit = 0;
+
+ write_lock(&hp_sdc.lock);
+
+ /* If i8042 buffers are full, we cannot do anything that
+ requires output, so we skip to the administrativa. */
+ if (hp_sdc.ibf) {
+ hp_sdc_status_in8();
+ if (hp_sdc.ibf)
+ goto finish;
+ }
+
+ anew:
+ /* See if we are in the middle of a sequence. */
+ if (hp_sdc.wcurr < 0)
+ hp_sdc.wcurr = 0;
+ read_lock_irq(&hp_sdc.rtq_lock);
+ if (hp_sdc.rcurr == hp_sdc.wcurr)
+ hp_sdc.wcurr++;
+ read_unlock_irq(&hp_sdc.rtq_lock);
+ if (hp_sdc.wcurr >= HP_SDC_QUEUE_LEN)
+ hp_sdc.wcurr = 0;
+ curridx = hp_sdc.wcurr;
+
+ if (hp_sdc.tq[curridx] != NULL)
+ goto start;
+
+ while (++curridx != hp_sdc.wcurr) {
+ if (curridx >= HP_SDC_QUEUE_LEN) {
+ curridx = -1; /* Wrap to top */
+ continue;
+ }
+ read_lock_irq(&hp_sdc.rtq_lock);
+ if (hp_sdc.rcurr == curridx) {
+ read_unlock_irq(&hp_sdc.rtq_lock);
+ continue;
+ }
+ read_unlock_irq(&hp_sdc.rtq_lock);
+ if (hp_sdc.tq[curridx] != NULL)
+ break; /* Found one. */
+ }
+ if (curridx == hp_sdc.wcurr) { /* There's nothing queued to do. */
+ curridx = -1;
+ }
+ hp_sdc.wcurr = curridx;
+
+ start:
+
+ /* Check to see if the interrupt mask needs to be set. */
+ if (hp_sdc.set_im) {
+ hp_sdc_status_out8(hp_sdc.im | HP_SDC_CMD_SET_IM);
+ hp_sdc.set_im = 0;
+ goto finish;
+ }
+
+ if (hp_sdc.wcurr == -1)
+ goto done;
+
+ curr = hp_sdc.tq[curridx];
+ idx = curr->actidx;
+
+ if (curr->actidx >= curr->endidx) {
+ hp_sdc.tq[curridx] = NULL;
+ /* Interleave outbound data between the transactions. */
+ hp_sdc.wcurr++;
+ if (hp_sdc.wcurr >= HP_SDC_QUEUE_LEN)
+ hp_sdc.wcurr = 0;
+ goto finish;
+ }
+
+ act = curr->seq[idx];
+ idx++;
+
+ if (curr->idx >= curr->endidx) {
+ if (act & HP_SDC_ACT_DEALLOC)
+ kfree(curr);
+ hp_sdc.tq[curridx] = NULL;
+ /* Interleave outbound data between the transactions. */
+ hp_sdc.wcurr++;
+ if (hp_sdc.wcurr >= HP_SDC_QUEUE_LEN)
+ hp_sdc.wcurr = 0;
+ goto finish;
+ }
+
+ while (act & HP_SDC_ACT_PRECMD) {
+ if (curr->idx != idx) {
+ idx++;
+ act &= ~HP_SDC_ACT_PRECMD;
+ break;
+ }
+ hp_sdc_status_out8(curr->seq[idx]);
+ curr->idx++;
+ /* act finished? */
+ if ((act & HP_SDC_ACT_DURING) == HP_SDC_ACT_PRECMD)
+ goto actdone;
+ /* skip quantity field if data-out sequence follows. */
+ if (act & HP_SDC_ACT_DATAOUT)
+ curr->idx++;
+ goto finish;
+ }
+ if (act & HP_SDC_ACT_DATAOUT) {
+ int qty;
+
+ qty = curr->seq[idx];
+ idx++;
+ if (curr->idx - idx < qty) {
+ hp_sdc_data_out8(curr->seq[curr->idx]);
+ curr->idx++;
+ /* act finished? */
+ if (curr->idx - idx >= qty &&
+ (act & HP_SDC_ACT_DURING) == HP_SDC_ACT_DATAOUT)
+ goto actdone;
+ goto finish;
+ }
+ idx += qty;
+ act &= ~HP_SDC_ACT_DATAOUT;
+ } else
+ while (act & HP_SDC_ACT_DATAREG) {
+ int mask;
+ uint8_t w7[4];
+
+ mask = curr->seq[idx];
+ if (idx != curr->idx) {
+ idx++;
+ idx += !!(mask & 1);
+ idx += !!(mask & 2);
+ idx += !!(mask & 4);
+ idx += !!(mask & 8);
+ act &= ~HP_SDC_ACT_DATAREG;
+ break;
+ }
+
+ w7[0] = (mask & 1) ? curr->seq[++idx] : hp_sdc.r7[0];
+ w7[1] = (mask & 2) ? curr->seq[++idx] : hp_sdc.r7[1];
+ w7[2] = (mask & 4) ? curr->seq[++idx] : hp_sdc.r7[2];
+ w7[3] = (mask & 8) ? curr->seq[++idx] : hp_sdc.r7[3];
+
+ if (hp_sdc.wi > 0x73 || hp_sdc.wi < 0x70 ||
+ w7[hp_sdc.wi - 0x70] == hp_sdc.r7[hp_sdc.wi - 0x70]) {
+ int i = 0;
+
+ /* Need to point the write index register */
+ while (i < 4 && w7[i] == hp_sdc.r7[i])
+ i++;
+
+ if (i < 4) {
+ hp_sdc_status_out8(HP_SDC_CMD_SET_D0 + i);
+ hp_sdc.wi = 0x70 + i;
+ goto finish;
+ }
+
+ idx++;
+ if ((act & HP_SDC_ACT_DURING) == HP_SDC_ACT_DATAREG)
+ goto actdone;
+
+ curr->idx = idx;
+ act &= ~HP_SDC_ACT_DATAREG;
+ break;
+ }
+
+ hp_sdc_data_out8(w7[hp_sdc.wi - 0x70]);
+ hp_sdc.r7[hp_sdc.wi - 0x70] = w7[hp_sdc.wi - 0x70];
+ hp_sdc.wi++; /* write index register autoincrements */
+ {
+ int i = 0;
+
+ while ((i < 4) && w7[i] == hp_sdc.r7[i])
+ i++;
+ if (i >= 4) {
+ curr->idx = idx + 1;
+ if ((act & HP_SDC_ACT_DURING) ==
+ HP_SDC_ACT_DATAREG)
+ goto actdone;
+ }
+ }
+ goto finish;
+ }
+ /* We don't go any further in the command if there is a pending read,
+ because we don't want interleaved results. */
+ read_lock_irq(&hp_sdc.rtq_lock);
+ if (hp_sdc.rcurr >= 0) {
+ read_unlock_irq(&hp_sdc.rtq_lock);
+ goto finish;
+ }
+ read_unlock_irq(&hp_sdc.rtq_lock);
+
+
+ if (act & HP_SDC_ACT_POSTCMD) {
+ uint8_t postcmd;
+
+ /* curr->idx should == idx at this point. */
+ postcmd = curr->seq[idx];
+ curr->idx++;
+ if (act & HP_SDC_ACT_DATAIN) {
+
+ /* Start a new read */
+ hp_sdc.rqty = curr->seq[curr->idx];
+ hp_sdc.rtime = ktime_get();
+ curr->idx++;
+ /* Still need to lock here in case of spurious irq. */
+ write_lock_irq(&hp_sdc.rtq_lock);
+ hp_sdc.rcurr = curridx;
+ write_unlock_irq(&hp_sdc.rtq_lock);
+ hp_sdc_status_out8(postcmd);
+ goto finish;
+ }
+ hp_sdc_status_out8(postcmd);
+ goto actdone;
+ }
+
+ actdone:
+ if (act & HP_SDC_ACT_SEMAPHORE)
+ up(curr->act.semaphore);
+ else if (act & HP_SDC_ACT_CALLBACK)
+ curr->act.irqhook(0,NULL,0,0);
+
+ if (curr->idx >= curr->endidx) { /* This transaction is over. */
+ if (act & HP_SDC_ACT_DEALLOC)
+ kfree(curr);
+ hp_sdc.tq[curridx] = NULL;
+ } else {
+ curr->actidx = idx + 1;
+ curr->idx = idx + 2;
+ }
+ /* Interleave outbound data between the transactions. */
+ hp_sdc.wcurr++;
+ if (hp_sdc.wcurr >= HP_SDC_QUEUE_LEN)
+ hp_sdc.wcurr = 0;
+
+ finish:
+ /* If by some quirk IBF has cleared and our ISR has run to
+ see that that has happened, do it all again. */
+ if (!hp_sdc.ibf && limit++ < 20)
+ goto anew;
+
+ done:
+ if (hp_sdc.wcurr >= 0)
+ tasklet_schedule(&hp_sdc.task);
+ write_unlock(&hp_sdc.lock);
+
+ return 0;
+}
+
+/******* Functions called in either user or kernel context ****/
+int __hp_sdc_enqueue_transaction(hp_sdc_transaction *this)
+{
+ int i;
+
+ if (this == NULL) {
+ BUG();
+ return -EINVAL;
+ }
+
+ /* Can't have same transaction on queue twice */
+ for (i = 0; i < HP_SDC_QUEUE_LEN; i++)
+ if (hp_sdc.tq[i] == this)
+ goto fail;
+
+ this->actidx = 0;
+ this->idx = 1;
+
+ /* Search for empty slot */
+ for (i = 0; i < HP_SDC_QUEUE_LEN; i++)
+ if (hp_sdc.tq[i] == NULL) {
+ hp_sdc.tq[i] = this;
+ tasklet_schedule(&hp_sdc.task);
+ return 0;
+ }
+
+ printk(KERN_WARNING PREFIX "No free slot to add transaction.\n");
+ return -EBUSY;
+
+ fail:
+ printk(KERN_WARNING PREFIX "Transaction add failed: transaction already queued?\n");
+ return -EINVAL;
+}
+
+int hp_sdc_enqueue_transaction(hp_sdc_transaction *this) {
+ unsigned long flags;
+ int ret;
+
+ write_lock_irqsave(&hp_sdc.lock, flags);
+ ret = __hp_sdc_enqueue_transaction(this);
+ write_unlock_irqrestore(&hp_sdc.lock,flags);
+
+ return ret;
+}
+
+int hp_sdc_dequeue_transaction(hp_sdc_transaction *this)
+{
+ unsigned long flags;
+ int i;
+
+ write_lock_irqsave(&hp_sdc.lock, flags);
+
+ /* TODO: don't remove it if it's not done. */
+
+ for (i = 0; i < HP_SDC_QUEUE_LEN; i++)
+ if (hp_sdc.tq[i] == this)
+ hp_sdc.tq[i] = NULL;
+
+ write_unlock_irqrestore(&hp_sdc.lock, flags);
+ return 0;
+}
+
+
+
+/********************** User context functions **************************/
+int hp_sdc_request_timer_irq(hp_sdc_irqhook *callback)
+{
+ if (callback == NULL || hp_sdc.dev == NULL)
+ return -EINVAL;
+
+ write_lock_irq(&hp_sdc.hook_lock);
+ if (hp_sdc.timer != NULL) {
+ write_unlock_irq(&hp_sdc.hook_lock);
+ return -EBUSY;
+ }
+
+ hp_sdc.timer = callback;
+ /* Enable interrupts from the timers */
+ hp_sdc.im &= ~HP_SDC_IM_FH;
+ hp_sdc.im &= ~HP_SDC_IM_PT;
+ hp_sdc.im &= ~HP_SDC_IM_TIMERS;
+ hp_sdc.set_im = 1;
+ write_unlock_irq(&hp_sdc.hook_lock);
+
+ tasklet_schedule(&hp_sdc.task);
+
+ return 0;
+}
+
+int hp_sdc_request_hil_irq(hp_sdc_irqhook *callback)
+{
+ if (callback == NULL || hp_sdc.dev == NULL)
+ return -EINVAL;
+
+ write_lock_irq(&hp_sdc.hook_lock);
+ if (hp_sdc.hil != NULL) {
+ write_unlock_irq(&hp_sdc.hook_lock);
+ return -EBUSY;
+ }
+
+ hp_sdc.hil = callback;
+ hp_sdc.im &= ~(HP_SDC_IM_HIL | HP_SDC_IM_RESET);
+ hp_sdc.set_im = 1;
+ write_unlock_irq(&hp_sdc.hook_lock);
+
+ tasklet_schedule(&hp_sdc.task);
+
+ return 0;
+}
+
+int hp_sdc_request_cooked_irq(hp_sdc_irqhook *callback)
+{
+ if (callback == NULL || hp_sdc.dev == NULL)
+ return -EINVAL;
+
+ write_lock_irq(&hp_sdc.hook_lock);
+ if (hp_sdc.cooked != NULL) {
+ write_unlock_irq(&hp_sdc.hook_lock);
+ return -EBUSY;
+ }
+
+ /* Enable interrupts from the HIL MLC */
+ hp_sdc.cooked = callback;
+ hp_sdc.im &= ~(HP_SDC_IM_HIL | HP_SDC_IM_RESET);
+ hp_sdc.set_im = 1;
+ write_unlock_irq(&hp_sdc.hook_lock);
+
+ tasklet_schedule(&hp_sdc.task);
+
+ return 0;
+}
+
+int hp_sdc_release_timer_irq(hp_sdc_irqhook *callback)
+{
+ write_lock_irq(&hp_sdc.hook_lock);
+ if ((callback != hp_sdc.timer) ||
+ (hp_sdc.timer == NULL)) {
+ write_unlock_irq(&hp_sdc.hook_lock);
+ return -EINVAL;
+ }
+
+ /* Disable interrupts from the timers */
+ hp_sdc.timer = NULL;
+ hp_sdc.im |= HP_SDC_IM_TIMERS;
+ hp_sdc.im |= HP_SDC_IM_FH;
+ hp_sdc.im |= HP_SDC_IM_PT;
+ hp_sdc.set_im = 1;
+ write_unlock_irq(&hp_sdc.hook_lock);
+ tasklet_schedule(&hp_sdc.task);
+
+ return 0;
+}
+
+int hp_sdc_release_hil_irq(hp_sdc_irqhook *callback)
+{
+ write_lock_irq(&hp_sdc.hook_lock);
+ if ((callback != hp_sdc.hil) ||
+ (hp_sdc.hil == NULL)) {
+ write_unlock_irq(&hp_sdc.hook_lock);
+ return -EINVAL;
+ }
+
+ hp_sdc.hil = NULL;
+ /* Disable interrupts from HIL only if there is no cooked driver. */
+ if(hp_sdc.cooked == NULL) {
+ hp_sdc.im |= (HP_SDC_IM_HIL | HP_SDC_IM_RESET);
+ hp_sdc.set_im = 1;
+ }
+ write_unlock_irq(&hp_sdc.hook_lock);
+ tasklet_schedule(&hp_sdc.task);
+
+ return 0;
+}
+
+int hp_sdc_release_cooked_irq(hp_sdc_irqhook *callback)
+{
+ write_lock_irq(&hp_sdc.hook_lock);
+ if ((callback != hp_sdc.cooked) ||
+ (hp_sdc.cooked == NULL)) {
+ write_unlock_irq(&hp_sdc.hook_lock);
+ return -EINVAL;
+ }
+
+ hp_sdc.cooked = NULL;
+ /* Disable interrupts from HIL only if there is no raw HIL driver. */
+ if(hp_sdc.hil == NULL) {
+ hp_sdc.im |= (HP_SDC_IM_HIL | HP_SDC_IM_RESET);
+ hp_sdc.set_im = 1;
+ }
+ write_unlock_irq(&hp_sdc.hook_lock);
+ tasklet_schedule(&hp_sdc.task);
+
+ return 0;
+}
+
+/************************* Keepalive timer task *********************/
+
+static void hp_sdc_kicker(struct timer_list *unused)
+{
+ tasklet_schedule(&hp_sdc.task);
+ /* Re-insert the periodic task. */
+ mod_timer(&hp_sdc.kicker, jiffies + HZ);
+}
+
+/************************** Module Initialization ***************************/
+
+#if defined(__hppa__)
+
+static const struct parisc_device_id hp_sdc_tbl[] __initconst = {
+ {
+ .hw_type = HPHW_FIO,
+ .hversion_rev = HVERSION_REV_ANY_ID,
+ .hversion = HVERSION_ANY_ID,
+ .sversion = 0x73,
+ },
+ { 0, }
+};
+
+MODULE_DEVICE_TABLE(parisc, hp_sdc_tbl);
+
+static int __init hp_sdc_init_hppa(struct parisc_device *d);
+static struct delayed_work moduleloader_work;
+
+static struct parisc_driver hp_sdc_driver __refdata = {
+ .name = "hp_sdc",
+ .id_table = hp_sdc_tbl,
+ .probe = hp_sdc_init_hppa,
+};
+
+#endif /* __hppa__ */
+
+static int __init hp_sdc_init(void)
+{
+ char *errstr;
+ hp_sdc_transaction t_sync;
+ uint8_t ts_sync[6];
+ struct semaphore s_sync;
+
+ rwlock_init(&hp_sdc.lock);
+ rwlock_init(&hp_sdc.ibf_lock);
+ rwlock_init(&hp_sdc.rtq_lock);
+ rwlock_init(&hp_sdc.hook_lock);
+
+ hp_sdc.timer = NULL;
+ hp_sdc.hil = NULL;
+ hp_sdc.pup = NULL;
+ hp_sdc.cooked = NULL;
+ hp_sdc.im = HP_SDC_IM_MASK; /* Mask maskable irqs */
+ hp_sdc.set_im = 1;
+ hp_sdc.wi = 0xff;
+ hp_sdc.r7[0] = 0xff;
+ hp_sdc.r7[1] = 0xff;
+ hp_sdc.r7[2] = 0xff;
+ hp_sdc.r7[3] = 0xff;
+ hp_sdc.ibf = 1;
+
+ memset(&hp_sdc.tq, 0, sizeof(hp_sdc.tq));
+
+ hp_sdc.wcurr = -1;
+ hp_sdc.rcurr = -1;
+ hp_sdc.rqty = 0;
+
+ hp_sdc.dev_err = -ENODEV;
+
+ errstr = "IO not found for";
+ if (!hp_sdc.base_io)
+ goto err0;
+
+ errstr = "IRQ not found for";
+ if (!hp_sdc.irq)
+ goto err0;
+
+ hp_sdc.dev_err = -EBUSY;
+
+#if defined(__hppa__)
+ errstr = "IO not available for";
+ if (request_region(hp_sdc.data_io, 2, hp_sdc_driver.name))
+ goto err0;
+#endif
+
+ errstr = "IRQ not available for";
+ if (request_irq(hp_sdc.irq, &hp_sdc_isr, IRQF_SHARED,
+ "HP SDC", &hp_sdc))
+ goto err1;
+
+ errstr = "NMI not available for";
+ if (request_irq(hp_sdc.nmi, &hp_sdc_nmisr, IRQF_SHARED,
+ "HP SDC NMI", &hp_sdc))
+ goto err2;
+
+ pr_info(PREFIX "HP SDC at 0x%08lx, IRQ %d (NMI IRQ %d)\n",
+ hp_sdc.base_io, hp_sdc.irq, hp_sdc.nmi);
+
+ hp_sdc_status_in8();
+ hp_sdc_data_in8();
+
+ tasklet_init(&hp_sdc.task, hp_sdc_tasklet, 0);
+
+ /* Sync the output buffer registers, thus scheduling hp_sdc_tasklet. */
+ t_sync.actidx = 0;
+ t_sync.idx = 1;
+ t_sync.endidx = 6;
+ t_sync.seq = ts_sync;
+ ts_sync[0] = HP_SDC_ACT_DATAREG | HP_SDC_ACT_SEMAPHORE;
+ ts_sync[1] = 0x0f;
+ ts_sync[2] = ts_sync[3] = ts_sync[4] = ts_sync[5] = 0;
+ t_sync.act.semaphore = &s_sync;
+ sema_init(&s_sync, 0);
+ hp_sdc_enqueue_transaction(&t_sync);
+ down(&s_sync); /* Wait for t_sync to complete */
+
+ /* Create the keepalive task */
+ timer_setup(&hp_sdc.kicker, hp_sdc_kicker, 0);
+ hp_sdc.kicker.expires = jiffies + HZ;
+ add_timer(&hp_sdc.kicker);
+
+ hp_sdc.dev_err = 0;
+ return 0;
+ err2:
+ free_irq(hp_sdc.irq, &hp_sdc);
+ err1:
+ release_region(hp_sdc.data_io, 2);
+ err0:
+ printk(KERN_WARNING PREFIX ": %s SDC IO=0x%p IRQ=0x%x NMI=0x%x\n",
+ errstr, (void *)hp_sdc.base_io, hp_sdc.irq, hp_sdc.nmi);
+ hp_sdc.dev = NULL;
+
+ return hp_sdc.dev_err;
+}
+
+#if defined(__hppa__)
+
+static void request_module_delayed(struct work_struct *work)
+{
+ request_module("hp_sdc_mlc");
+}
+
+static int __init hp_sdc_init_hppa(struct parisc_device *d)
+{
+ int ret;
+
+ if (!d)
+ return 1;
+ if (hp_sdc.dev != NULL)
+ return 1; /* We only expect one SDC */
+
+ hp_sdc.dev = d;
+ hp_sdc.irq = d->irq;
+ hp_sdc.nmi = d->aux_irq;
+ hp_sdc.base_io = d->hpa.start;
+ hp_sdc.data_io = d->hpa.start + 0x800;
+ hp_sdc.status_io = d->hpa.start + 0x801;
+
+ INIT_DELAYED_WORK(&moduleloader_work, request_module_delayed);
+
+ ret = hp_sdc_init();
+ /* after successful initialization give SDC some time to settle
+ * and then load the hp_sdc_mlc upper layer driver */
+ if (!ret)
+ schedule_delayed_work(&moduleloader_work,
+ msecs_to_jiffies(2000));
+
+ return ret;
+}
+
+#endif /* __hppa__ */
+
+static void hp_sdc_exit(void)
+{
+ /* do nothing if we don't have a SDC */
+ if (!hp_sdc.dev)
+ return;
+
+ write_lock_irq(&hp_sdc.lock);
+
+ /* Turn off all maskable "sub-function" irq's. */
+ hp_sdc_spin_ibf();
+ sdc_writeb(HP_SDC_CMD_SET_IM | HP_SDC_IM_MASK, hp_sdc.status_io);
+
+ /* Wait until we know this has been processed by the i8042 */
+ hp_sdc_spin_ibf();
+
+ free_irq(hp_sdc.nmi, &hp_sdc);
+ free_irq(hp_sdc.irq, &hp_sdc);
+ write_unlock_irq(&hp_sdc.lock);
+
+ del_timer_sync(&hp_sdc.kicker);
+
+ tasklet_kill(&hp_sdc.task);
+
+#if defined(__hppa__)
+ cancel_delayed_work_sync(&moduleloader_work);
+ if (unregister_parisc_driver(&hp_sdc_driver))
+ printk(KERN_WARNING PREFIX "Error unregistering HP SDC");
+#endif
+}
+
+static int __init hp_sdc_register(void)
+{
+ hp_sdc_transaction tq_init;
+ uint8_t tq_init_seq[5];
+ struct semaphore tq_init_sem;
+#if defined(__mc68000__)
+ unsigned char i;
+#endif
+
+ if (hp_sdc_disabled) {
+ printk(KERN_WARNING PREFIX "HP SDC driver disabled by no_hpsdc=1.\n");
+ return -ENODEV;
+ }
+
+ hp_sdc.dev = NULL;
+ hp_sdc.dev_err = 0;
+#if defined(__hppa__)
+ if (register_parisc_driver(&hp_sdc_driver)) {
+ printk(KERN_WARNING PREFIX "Error registering SDC with system bus tree.\n");
+ return -ENODEV;
+ }
+#elif defined(__mc68000__)
+ if (!MACH_IS_HP300)
+ return -ENODEV;
+
+ hp_sdc.irq = 1;
+ hp_sdc.nmi = 7;
+ hp_sdc.base_io = (unsigned long) 0xf0428000;
+ hp_sdc.data_io = (unsigned long) hp_sdc.base_io + 1;
+ hp_sdc.status_io = (unsigned long) hp_sdc.base_io + 3;
+ if (!copy_from_kernel_nofault(&i, (unsigned char *)hp_sdc.data_io, 1))
+ hp_sdc.dev = (void *)1;
+ hp_sdc.dev_err = hp_sdc_init();
+#endif
+ if (hp_sdc.dev == NULL) {
+ printk(KERN_WARNING PREFIX "No SDC found.\n");
+ return hp_sdc.dev_err;
+ }
+
+ sema_init(&tq_init_sem, 0);
+
+ tq_init.actidx = 0;
+ tq_init.idx = 1;
+ tq_init.endidx = 5;
+ tq_init.seq = tq_init_seq;
+ tq_init.act.semaphore = &tq_init_sem;
+
+ tq_init_seq[0] =
+ HP_SDC_ACT_POSTCMD | HP_SDC_ACT_DATAIN | HP_SDC_ACT_SEMAPHORE;
+ tq_init_seq[1] = HP_SDC_CMD_READ_KCC;
+ tq_init_seq[2] = 1;
+ tq_init_seq[3] = 0;
+ tq_init_seq[4] = 0;
+
+ hp_sdc_enqueue_transaction(&tq_init);
+
+ down(&tq_init_sem);
+ up(&tq_init_sem);
+
+ if ((tq_init_seq[0] & HP_SDC_ACT_DEAD) == HP_SDC_ACT_DEAD) {
+ printk(KERN_WARNING PREFIX "Error reading config byte.\n");
+ hp_sdc_exit();
+ return -ENODEV;
+ }
+ hp_sdc.r11 = tq_init_seq[4];
+ if (hp_sdc.r11 & HP_SDC_CFG_NEW) {
+ const char *str;
+ printk(KERN_INFO PREFIX "New style SDC\n");
+ tq_init_seq[1] = HP_SDC_CMD_READ_XTD;
+ tq_init.actidx = 0;
+ tq_init.idx = 1;
+ down(&tq_init_sem);
+ hp_sdc_enqueue_transaction(&tq_init);
+ down(&tq_init_sem);
+ up(&tq_init_sem);
+ if ((tq_init_seq[0] & HP_SDC_ACT_DEAD) == HP_SDC_ACT_DEAD) {
+ printk(KERN_WARNING PREFIX "Error reading extended config byte.\n");
+ return -ENODEV;
+ }
+ hp_sdc.r7e = tq_init_seq[4];
+ HP_SDC_XTD_REV_STRINGS(hp_sdc.r7e & HP_SDC_XTD_REV, str)
+ printk(KERN_INFO PREFIX "Revision: %s\n", str);
+ if (hp_sdc.r7e & HP_SDC_XTD_BEEPER)
+ printk(KERN_INFO PREFIX "TI SN76494 beeper present\n");
+ if (hp_sdc.r7e & HP_SDC_XTD_BBRTC)
+ printk(KERN_INFO PREFIX "OKI MSM-58321 BBRTC present\n");
+ printk(KERN_INFO PREFIX "Spunking the self test register to force PUP "
+ "on next firmware reset.\n");
+ tq_init_seq[0] = HP_SDC_ACT_PRECMD |
+ HP_SDC_ACT_DATAOUT | HP_SDC_ACT_SEMAPHORE;
+ tq_init_seq[1] = HP_SDC_CMD_SET_STR;
+ tq_init_seq[2] = 1;
+ tq_init_seq[3] = 0;
+ tq_init.actidx = 0;
+ tq_init.idx = 1;
+ tq_init.endidx = 4;
+ down(&tq_init_sem);
+ hp_sdc_enqueue_transaction(&tq_init);
+ down(&tq_init_sem);
+ up(&tq_init_sem);
+ } else
+ printk(KERN_INFO PREFIX "Old style SDC (1820-%s).\n",
+ (hp_sdc.r11 & HP_SDC_CFG_REV) ? "3300" : "2564/3087");
+
+ return 0;
+}
+
+module_init(hp_sdc_register);
+module_exit(hp_sdc_exit);
+
+/* Timing notes: These measurements taken on my 64MHz 7100-LC (715/64)
+ * cycles cycles-adj time
+ * between two consecutive mfctl(16)'s: 4 n/a 63ns
+ * hp_sdc_spin_ibf when idle: 119 115 1.7us
+ * gsc_writeb status register: 83 79 1.2us
+ * IBF to clear after sending SET_IM: 6204 6006 93us
+ * IBF to clear after sending LOAD_RT: 4467 4352 68us
+ * IBF to clear after sending two LOAD_RTs: 18974 18859 295us
+ * READ_T1, read status/data, IRQ, call handler: 35564 n/a 556us
+ * cmd to ~IBF READ_T1 2nd time right after: 5158403 n/a 81ms
+ * between IRQ received and ~IBF for above: 2578877 n/a 40ms
+ *
+ * Performance stats after a run of this module configuring HIL and
+ * receiving a few mouse events:
+ *
+ * status in8 282508 cycles 7128 calls
+ * status out8 8404 cycles 341 calls
+ * data out8 1734 cycles 78 calls
+ * isr 174324 cycles 617 calls (includes take)
+ * take 1241 cycles 2 calls
+ * put 1411504 cycles 6937 calls
+ * task 1655209 cycles 6937 calls (includes put)
+ *
+ */