diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
commit | 2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch) | |
tree | 848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/input/touchscreen/ili210x.c | |
parent | Initial commit. (diff) | |
download | linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip |
Adding upstream version 6.1.76.upstream/6.1.76upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/input/touchscreen/ili210x.c')
-rw-r--r-- | drivers/input/touchscreen/ili210x.c | 1053 |
1 files changed, 1053 insertions, 0 deletions
diff --git a/drivers/input/touchscreen/ili210x.c b/drivers/input/touchscreen/ili210x.c new file mode 100644 index 000000000..e9bd36adb --- /dev/null +++ b/drivers/input/touchscreen/ili210x.c @@ -0,0 +1,1053 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include <linux/crc-ccitt.h> +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/ihex.h> +#include <linux/input.h> +#include <linux/input/mt.h> +#include <linux/input/touchscreen.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/sizes.h> +#include <linux/slab.h> +#include <asm/unaligned.h> + +#define ILI2XXX_POLL_PERIOD 15 + +#define ILI210X_DATA_SIZE 64 +#define ILI211X_DATA_SIZE 43 +#define ILI251X_DATA_SIZE1 31 +#define ILI251X_DATA_SIZE2 20 + +/* Touchscreen commands */ +#define REG_TOUCHDATA 0x10 +#define REG_PANEL_INFO 0x20 +#define REG_FIRMWARE_VERSION 0x40 +#define REG_PROTOCOL_VERSION 0x42 +#define REG_KERNEL_VERSION 0x61 +#define REG_IC_BUSY 0x80 +#define REG_IC_BUSY_NOT_BUSY 0x50 +#define REG_GET_MODE 0xc0 +#define REG_GET_MODE_AP 0x5a +#define REG_GET_MODE_BL 0x55 +#define REG_SET_MODE_AP 0xc1 +#define REG_SET_MODE_BL 0xc2 +#define REG_WRITE_DATA 0xc3 +#define REG_WRITE_ENABLE 0xc4 +#define REG_READ_DATA_CRC 0xc7 +#define REG_CALIBRATE 0xcc + +#define ILI251X_FW_FILENAME "ilitek/ili251x.bin" + +struct ili2xxx_chip { + int (*read_reg)(struct i2c_client *client, u8 reg, + void *buf, size_t len); + int (*get_touch_data)(struct i2c_client *client, u8 *data); + bool (*parse_touch_data)(const u8 *data, unsigned int finger, + unsigned int *x, unsigned int *y, + unsigned int *z); + bool (*continue_polling)(const u8 *data, bool touch); + unsigned int max_touches; + unsigned int resolution; + bool has_calibrate_reg; + bool has_firmware_proto; + bool has_pressure_reg; +}; + +struct ili210x { + struct i2c_client *client; + struct input_dev *input; + struct gpio_desc *reset_gpio; + struct touchscreen_properties prop; + const struct ili2xxx_chip *chip; + u8 version_firmware[8]; + u8 version_kernel[5]; + u8 version_proto[2]; + u8 ic_mode[2]; + bool stop; +}; + +static int ili210x_read_reg(struct i2c_client *client, + u8 reg, void *buf, size_t len) +{ + struct i2c_msg msg[] = { + { + .addr = client->addr, + .flags = 0, + .len = 1, + .buf = ®, + }, + { + .addr = client->addr, + .flags = I2C_M_RD, + .len = len, + .buf = buf, + } + }; + int error, ret; + + ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg)); + if (ret != ARRAY_SIZE(msg)) { + error = ret < 0 ? ret : -EIO; + dev_err(&client->dev, "%s failed: %d\n", __func__, error); + return error; + } + + return 0; +} + +static int ili210x_read_touch_data(struct i2c_client *client, u8 *data) +{ + return ili210x_read_reg(client, REG_TOUCHDATA, + data, ILI210X_DATA_SIZE); +} + +static bool ili210x_touchdata_to_coords(const u8 *touchdata, + unsigned int finger, + unsigned int *x, unsigned int *y, + unsigned int *z) +{ + if (!(touchdata[0] & BIT(finger))) + return false; + + *x = get_unaligned_be16(touchdata + 1 + (finger * 4) + 0); + *y = get_unaligned_be16(touchdata + 1 + (finger * 4) + 2); + + return true; +} + +static bool ili210x_check_continue_polling(const u8 *data, bool touch) +{ + return data[0] & 0xf3; +} + +static const struct ili2xxx_chip ili210x_chip = { + .read_reg = ili210x_read_reg, + .get_touch_data = ili210x_read_touch_data, + .parse_touch_data = ili210x_touchdata_to_coords, + .continue_polling = ili210x_check_continue_polling, + .max_touches = 2, + .has_calibrate_reg = true, +}; + +static int ili211x_read_touch_data(struct i2c_client *client, u8 *data) +{ + s16 sum = 0; + int error; + int ret; + int i; + + ret = i2c_master_recv(client, data, ILI211X_DATA_SIZE); + if (ret != ILI211X_DATA_SIZE) { + error = ret < 0 ? ret : -EIO; + dev_err(&client->dev, "%s failed: %d\n", __func__, error); + return error; + } + + /* This chip uses custom checksum at the end of data */ + for (i = 0; i < ILI211X_DATA_SIZE - 1; i++) + sum = (sum + data[i]) & 0xff; + + if ((-sum & 0xff) != data[ILI211X_DATA_SIZE - 1]) { + dev_err(&client->dev, + "CRC error (crc=0x%02x expected=0x%02x)\n", + sum, data[ILI211X_DATA_SIZE - 1]); + return -EIO; + } + + return 0; +} + +static bool ili211x_touchdata_to_coords(const u8 *touchdata, + unsigned int finger, + unsigned int *x, unsigned int *y, + unsigned int *z) +{ + u32 data; + + data = get_unaligned_be32(touchdata + 1 + (finger * 4) + 0); + if (data == 0xffffffff) /* Finger up */ + return false; + + *x = ((touchdata[1 + (finger * 4) + 0] & 0xf0) << 4) | + touchdata[1 + (finger * 4) + 1]; + *y = ((touchdata[1 + (finger * 4) + 0] & 0x0f) << 8) | + touchdata[1 + (finger * 4) + 2]; + + return true; +} + +static bool ili211x_decline_polling(const u8 *data, bool touch) +{ + return false; +} + +static const struct ili2xxx_chip ili211x_chip = { + .read_reg = ili210x_read_reg, + .get_touch_data = ili211x_read_touch_data, + .parse_touch_data = ili211x_touchdata_to_coords, + .continue_polling = ili211x_decline_polling, + .max_touches = 10, + .resolution = 2048, +}; + +static bool ili212x_touchdata_to_coords(const u8 *touchdata, + unsigned int finger, + unsigned int *x, unsigned int *y, + unsigned int *z) +{ + u16 val; + + val = get_unaligned_be16(touchdata + 3 + (finger * 5) + 0); + if (!(val & BIT(15))) /* Touch indication */ + return false; + + *x = val & 0x3fff; + *y = get_unaligned_be16(touchdata + 3 + (finger * 5) + 2); + + return true; +} + +static bool ili212x_check_continue_polling(const u8 *data, bool touch) +{ + return touch; +} + +static const struct ili2xxx_chip ili212x_chip = { + .read_reg = ili210x_read_reg, + .get_touch_data = ili210x_read_touch_data, + .parse_touch_data = ili212x_touchdata_to_coords, + .continue_polling = ili212x_check_continue_polling, + .max_touches = 10, + .has_calibrate_reg = true, +}; + +static int ili251x_read_reg_common(struct i2c_client *client, + u8 reg, void *buf, size_t len, + unsigned int delay) +{ + int error; + int ret; + + ret = i2c_master_send(client, ®, 1); + if (ret == 1) { + if (delay) + usleep_range(delay, delay + 500); + + ret = i2c_master_recv(client, buf, len); + if (ret == len) + return 0; + } + + error = ret < 0 ? ret : -EIO; + dev_err(&client->dev, "%s failed: %d\n", __func__, error); + return ret; +} + +static int ili251x_read_reg(struct i2c_client *client, + u8 reg, void *buf, size_t len) +{ + return ili251x_read_reg_common(client, reg, buf, len, 5000); +} + +static int ili251x_read_touch_data(struct i2c_client *client, u8 *data) +{ + int error; + + error = ili251x_read_reg_common(client, REG_TOUCHDATA, + data, ILI251X_DATA_SIZE1, 0); + if (!error && data[0] == 2) { + error = i2c_master_recv(client, data + ILI251X_DATA_SIZE1, + ILI251X_DATA_SIZE2); + if (error >= 0 && error != ILI251X_DATA_SIZE2) + error = -EIO; + } + + return error; +} + +static bool ili251x_touchdata_to_coords(const u8 *touchdata, + unsigned int finger, + unsigned int *x, unsigned int *y, + unsigned int *z) +{ + u16 val; + + val = get_unaligned_be16(touchdata + 1 + (finger * 5) + 0); + if (!(val & BIT(15))) /* Touch indication */ + return false; + + *x = val & 0x3fff; + *y = get_unaligned_be16(touchdata + 1 + (finger * 5) + 2); + *z = touchdata[1 + (finger * 5) + 4]; + + return true; +} + +static bool ili251x_check_continue_polling(const u8 *data, bool touch) +{ + return touch; +} + +static const struct ili2xxx_chip ili251x_chip = { + .read_reg = ili251x_read_reg, + .get_touch_data = ili251x_read_touch_data, + .parse_touch_data = ili251x_touchdata_to_coords, + .continue_polling = ili251x_check_continue_polling, + .max_touches = 10, + .has_calibrate_reg = true, + .has_firmware_proto = true, + .has_pressure_reg = true, +}; + +static bool ili210x_report_events(struct ili210x *priv, u8 *touchdata) +{ + struct input_dev *input = priv->input; + int i; + bool contact = false, touch; + unsigned int x = 0, y = 0, z = 0; + + for (i = 0; i < priv->chip->max_touches; i++) { + touch = priv->chip->parse_touch_data(touchdata, i, &x, &y, &z); + + input_mt_slot(input, i); + if (input_mt_report_slot_state(input, MT_TOOL_FINGER, touch)) { + touchscreen_report_pos(input, &priv->prop, x, y, true); + if (priv->chip->has_pressure_reg) + input_report_abs(input, ABS_MT_PRESSURE, z); + contact = true; + } + } + + input_mt_report_pointer_emulation(input, false); + input_sync(input); + + return contact; +} + +static irqreturn_t ili210x_irq(int irq, void *irq_data) +{ + struct ili210x *priv = irq_data; + struct i2c_client *client = priv->client; + const struct ili2xxx_chip *chip = priv->chip; + u8 touchdata[ILI210X_DATA_SIZE] = { 0 }; + bool keep_polling; + ktime_t time_next; + s64 time_delta; + bool touch; + int error; + + do { + time_next = ktime_add_ms(ktime_get(), ILI2XXX_POLL_PERIOD); + error = chip->get_touch_data(client, touchdata); + if (error) { + dev_err(&client->dev, + "Unable to get touch data: %d\n", error); + break; + } + + touch = ili210x_report_events(priv, touchdata); + keep_polling = chip->continue_polling(touchdata, touch); + if (keep_polling) { + time_delta = ktime_us_delta(time_next, ktime_get()); + if (time_delta > 0) + usleep_range(time_delta, time_delta + 1000); + } + } while (!priv->stop && keep_polling); + + return IRQ_HANDLED; +} + +static int ili251x_firmware_update_resolution(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ili210x *priv = i2c_get_clientdata(client); + u16 resx, resy; + u8 rs[10]; + int error; + + /* The firmware update blob might have changed the resolution. */ + error = priv->chip->read_reg(client, REG_PANEL_INFO, &rs, sizeof(rs)); + if (error) + return error; + + resx = le16_to_cpup((__le16 *)rs); + resy = le16_to_cpup((__le16 *)(rs + 2)); + + /* The value reported by the firmware is invalid. */ + if (!resx || resx == 0xffff || !resy || resy == 0xffff) + return -EINVAL; + + input_abs_set_max(priv->input, ABS_X, resx - 1); + input_abs_set_max(priv->input, ABS_Y, resy - 1); + input_abs_set_max(priv->input, ABS_MT_POSITION_X, resx - 1); + input_abs_set_max(priv->input, ABS_MT_POSITION_Y, resy - 1); + + return 0; +} + +static ssize_t ili251x_firmware_update_firmware_version(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ili210x *priv = i2c_get_clientdata(client); + int error; + u8 fw[8]; + + /* Get firmware version */ + error = priv->chip->read_reg(client, REG_FIRMWARE_VERSION, + &fw, sizeof(fw)); + if (!error) + memcpy(priv->version_firmware, fw, sizeof(fw)); + + return error; +} + +static ssize_t ili251x_firmware_update_kernel_version(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ili210x *priv = i2c_get_clientdata(client); + int error; + u8 kv[5]; + + /* Get kernel version */ + error = priv->chip->read_reg(client, REG_KERNEL_VERSION, + &kv, sizeof(kv)); + if (!error) + memcpy(priv->version_kernel, kv, sizeof(kv)); + + return error; +} + +static ssize_t ili251x_firmware_update_protocol_version(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ili210x *priv = i2c_get_clientdata(client); + int error; + u8 pv[2]; + + /* Get protocol version */ + error = priv->chip->read_reg(client, REG_PROTOCOL_VERSION, + &pv, sizeof(pv)); + if (!error) + memcpy(priv->version_proto, pv, sizeof(pv)); + + return error; +} + +static ssize_t ili251x_firmware_update_ic_mode(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ili210x *priv = i2c_get_clientdata(client); + int error; + u8 md[2]; + + /* Get chip boot mode */ + error = priv->chip->read_reg(client, REG_GET_MODE, &md, sizeof(md)); + if (!error) + memcpy(priv->ic_mode, md, sizeof(md)); + + return error; +} + +static int ili251x_firmware_update_cached_state(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ili210x *priv = i2c_get_clientdata(client); + int error; + + if (!priv->chip->has_firmware_proto) + return 0; + + /* Wait for firmware to boot and stabilize itself. */ + msleep(200); + + /* Firmware does report valid information. */ + error = ili251x_firmware_update_resolution(dev); + if (error) + return error; + + error = ili251x_firmware_update_firmware_version(dev); + if (error) + return error; + + error = ili251x_firmware_update_kernel_version(dev); + if (error) + return error; + + error = ili251x_firmware_update_protocol_version(dev); + if (error) + return error; + + error = ili251x_firmware_update_ic_mode(dev); + if (error) + return error; + + return 0; +} + +static ssize_t ili251x_firmware_version_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ili210x *priv = i2c_get_clientdata(client); + u8 *fw = priv->version_firmware; + + return sysfs_emit(buf, "%02x%02x.%02x%02x.%02x%02x.%02x%02x\n", + fw[0], fw[1], fw[2], fw[3], + fw[4], fw[5], fw[6], fw[7]); +} +static DEVICE_ATTR(firmware_version, 0444, ili251x_firmware_version_show, NULL); + +static ssize_t ili251x_kernel_version_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ili210x *priv = i2c_get_clientdata(client); + u8 *kv = priv->version_kernel; + + return sysfs_emit(buf, "%02x.%02x.%02x.%02x.%02x\n", + kv[0], kv[1], kv[2], kv[3], kv[4]); +} +static DEVICE_ATTR(kernel_version, 0444, ili251x_kernel_version_show, NULL); + +static ssize_t ili251x_protocol_version_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ili210x *priv = i2c_get_clientdata(client); + u8 *pv = priv->version_proto; + + return sysfs_emit(buf, "%02x.%02x\n", pv[0], pv[1]); +} +static DEVICE_ATTR(protocol_version, 0444, ili251x_protocol_version_show, NULL); + +static ssize_t ili251x_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ili210x *priv = i2c_get_clientdata(client); + u8 *md = priv->ic_mode; + char *mode = "AP"; + + if (md[0] == REG_GET_MODE_AP) /* Application Mode */ + mode = "AP"; + else if (md[0] == REG_GET_MODE_BL) /* BootLoader Mode */ + mode = "BL"; + else /* Unknown Mode */ + mode = "??"; + + return sysfs_emit(buf, "%02x.%02x:%s\n", md[0], md[1], mode); +} +static DEVICE_ATTR(mode, 0444, ili251x_mode_show, NULL); + +static ssize_t ili210x_calibrate(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ili210x *priv = i2c_get_clientdata(client); + unsigned long calibrate; + int rc; + u8 cmd = REG_CALIBRATE; + + if (kstrtoul(buf, 10, &calibrate)) + return -EINVAL; + + if (calibrate > 1) + return -EINVAL; + + if (calibrate) { + rc = i2c_master_send(priv->client, &cmd, sizeof(cmd)); + if (rc != sizeof(cmd)) + return -EIO; + } + + return count; +} +static DEVICE_ATTR(calibrate, S_IWUSR, NULL, ili210x_calibrate); + +static int ili251x_firmware_to_buffer(const struct firmware *fw, + u8 **buf, u16 *ac_end, u16 *df_end) +{ + const struct ihex_binrec *rec; + u32 fw_addr, fw_last_addr = 0; + u16 fw_len; + u8 *fw_buf; + int error; + + /* + * The firmware ihex blob can never be bigger than 64 kiB, so make this + * simple -- allocate a 64 kiB buffer, iterate over the ihex blob records + * once, copy them all into this buffer at the right locations, and then + * do all operations on this linear buffer. + */ + fw_buf = kzalloc(SZ_64K, GFP_KERNEL); + if (!fw_buf) + return -ENOMEM; + + rec = (const struct ihex_binrec *)fw->data; + while (rec) { + fw_addr = be32_to_cpu(rec->addr); + fw_len = be16_to_cpu(rec->len); + + /* The last 32 Byte firmware block can be 0xffe0 */ + if (fw_addr + fw_len > SZ_64K || fw_addr > SZ_64K - 32) { + error = -EFBIG; + goto err_big; + } + + /* Find the last address before DF start address, that is AC end */ + if (fw_addr == 0xf000) + *ac_end = fw_last_addr; + fw_last_addr = fw_addr + fw_len; + + memcpy(fw_buf + fw_addr, rec->data, fw_len); + rec = ihex_next_binrec(rec); + } + + /* DF end address is the last address in the firmware blob */ + *df_end = fw_addr + fw_len; + *buf = fw_buf; + return 0; + +err_big: + kfree(fw_buf); + return error; +} + +/* Switch mode between Application and BootLoader */ +static int ili251x_switch_ic_mode(struct i2c_client *client, u8 cmd_mode) +{ + struct ili210x *priv = i2c_get_clientdata(client); + u8 cmd_wren[3] = { REG_WRITE_ENABLE, 0x5a, 0xa5 }; + u8 md[2]; + int error; + + error = priv->chip->read_reg(client, REG_GET_MODE, md, sizeof(md)); + if (error) + return error; + /* Mode already set */ + if ((cmd_mode == REG_SET_MODE_AP && md[0] == REG_GET_MODE_AP) || + (cmd_mode == REG_SET_MODE_BL && md[0] == REG_GET_MODE_BL)) + return 0; + + /* Unlock writes */ + error = i2c_master_send(client, cmd_wren, sizeof(cmd_wren)); + if (error != sizeof(cmd_wren)) + return -EINVAL; + + mdelay(20); + + /* Select mode (BootLoader or Application) */ + error = i2c_master_send(client, &cmd_mode, 1); + if (error != 1) + return -EINVAL; + + mdelay(200); /* Reboot into bootloader takes a lot of time ... */ + + /* Read back mode */ + error = priv->chip->read_reg(client, REG_GET_MODE, md, sizeof(md)); + if (error) + return error; + /* Check if mode is correct now. */ + if ((cmd_mode == REG_SET_MODE_AP && md[0] == REG_GET_MODE_AP) || + (cmd_mode == REG_SET_MODE_BL && md[0] == REG_GET_MODE_BL)) + return 0; + + return -EINVAL; +} + +static int ili251x_firmware_busy(struct i2c_client *client) +{ + struct ili210x *priv = i2c_get_clientdata(client); + int error, i = 0; + u8 data; + + do { + /* The read_reg already contains suitable delay */ + error = priv->chip->read_reg(client, REG_IC_BUSY, &data, 1); + if (error) + return error; + if (i++ == 100000) + return -ETIMEDOUT; + } while (data != REG_IC_BUSY_NOT_BUSY); + + return 0; +} + +static int ili251x_firmware_write_to_ic(struct device *dev, u8 *fwbuf, + u16 start, u16 end, u8 dataflash) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ili210x *priv = i2c_get_clientdata(client); + u8 cmd_crc = REG_READ_DATA_CRC; + u8 crcrb[4] = { 0 }; + u8 fw_data[33]; + u16 fw_addr; + int error; + + /* + * The DF (dataflash) needs 2 bytes offset for unknown reasons, + * the AC (application) has 2 bytes CRC16-CCITT at the end. + */ + u16 crc = crc_ccitt(0, fwbuf + start + (dataflash ? 2 : 0), + end - start - 2); + + /* Unlock write to either AC (application) or DF (dataflash) area */ + u8 cmd_wr[10] = { + REG_WRITE_ENABLE, 0x5a, 0xa5, dataflash, + (end >> 16) & 0xff, (end >> 8) & 0xff, end & 0xff, + (crc >> 16) & 0xff, (crc >> 8) & 0xff, crc & 0xff + }; + + error = i2c_master_send(client, cmd_wr, sizeof(cmd_wr)); + if (error != sizeof(cmd_wr)) + return -EINVAL; + + error = ili251x_firmware_busy(client); + if (error) + return error; + + for (fw_addr = start; fw_addr < end; fw_addr += 32) { + fw_data[0] = REG_WRITE_DATA; + memcpy(&(fw_data[1]), fwbuf + fw_addr, 32); + error = i2c_master_send(client, fw_data, 33); + if (error != sizeof(fw_data)) + return error; + error = ili251x_firmware_busy(client); + if (error) + return error; + } + + error = i2c_master_send(client, &cmd_crc, 1); + if (error != 1) + return -EINVAL; + + error = ili251x_firmware_busy(client); + if (error) + return error; + + error = priv->chip->read_reg(client, REG_READ_DATA_CRC, + &crcrb, sizeof(crcrb)); + if (error) + return error; + + /* Check CRC readback */ + if ((crcrb[0] != (crc & 0xff)) || crcrb[1] != ((crc >> 8) & 0xff)) + return -EINVAL; + + return 0; +} + +static int ili251x_firmware_reset(struct i2c_client *client) +{ + u8 cmd_reset[2] = { 0xf2, 0x01 }; + int error; + + error = i2c_master_send(client, cmd_reset, sizeof(cmd_reset)); + if (error != sizeof(cmd_reset)) + return -EINVAL; + + return ili251x_firmware_busy(client); +} + +static void ili210x_hardware_reset(struct gpio_desc *reset_gpio) +{ + /* Reset the controller */ + gpiod_set_value_cansleep(reset_gpio, 1); + usleep_range(12000, 15000); + gpiod_set_value_cansleep(reset_gpio, 0); + msleep(300); +} + +static ssize_t ili210x_firmware_update_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ili210x *priv = i2c_get_clientdata(client); + const char *fwname = ILI251X_FW_FILENAME; + const struct firmware *fw; + u16 ac_end, df_end; + u8 *fwbuf; + int error; + int i; + + error = request_ihex_firmware(&fw, fwname, dev); + if (error) { + dev_err(dev, "Failed to request firmware %s, error=%d\n", + fwname, error); + return error; + } + + error = ili251x_firmware_to_buffer(fw, &fwbuf, &ac_end, &df_end); + release_firmware(fw); + if (error) + return error; + + /* + * Disable touchscreen IRQ, so that we would not get spurious touch + * interrupt during firmware update, and so that the IRQ handler won't + * trigger and interfere with the firmware update. There is no bit in + * the touch controller to disable the IRQs during update, so we have + * to do it this way here. + */ + disable_irq(client->irq); + + dev_dbg(dev, "Firmware update started, firmware=%s\n", fwname); + + ili210x_hardware_reset(priv->reset_gpio); + + error = ili251x_firmware_reset(client); + if (error) + goto exit; + + /* This may not succeed on first try, so re-try a few times. */ + for (i = 0; i < 5; i++) { + error = ili251x_switch_ic_mode(client, REG_SET_MODE_BL); + if (!error) + break; + } + + if (error) + goto exit; + + dev_dbg(dev, "IC is now in BootLoader mode\n"); + + msleep(200); /* The bootloader seems to need some time too. */ + + error = ili251x_firmware_write_to_ic(dev, fwbuf, 0xf000, df_end, 1); + if (error) { + dev_err(dev, "DF firmware update failed, error=%d\n", error); + goto exit; + } + + dev_dbg(dev, "DataFlash firmware written\n"); + + error = ili251x_firmware_write_to_ic(dev, fwbuf, 0x2000, ac_end, 0); + if (error) { + dev_err(dev, "AC firmware update failed, error=%d\n", error); + goto exit; + } + + dev_dbg(dev, "Application firmware written\n"); + + /* This may not succeed on first try, so re-try a few times. */ + for (i = 0; i < 5; i++) { + error = ili251x_switch_ic_mode(client, REG_SET_MODE_AP); + if (!error) + break; + } + + if (error) + goto exit; + + dev_dbg(dev, "IC is now in Application mode\n"); + + error = ili251x_firmware_update_cached_state(dev); + if (error) + goto exit; + + error = count; + +exit: + ili210x_hardware_reset(priv->reset_gpio); + dev_dbg(dev, "Firmware update ended, error=%i\n", error); + enable_irq(client->irq); + kfree(fwbuf); + return error; +} + +static DEVICE_ATTR(firmware_update, 0200, NULL, ili210x_firmware_update_store); + +static struct attribute *ili210x_attributes[] = { + &dev_attr_calibrate.attr, + &dev_attr_firmware_update.attr, + &dev_attr_firmware_version.attr, + &dev_attr_kernel_version.attr, + &dev_attr_protocol_version.attr, + &dev_attr_mode.attr, + NULL, +}; + +static umode_t ili210x_attributes_visible(struct kobject *kobj, + struct attribute *attr, int index) +{ + struct device *dev = kobj_to_dev(kobj); + struct i2c_client *client = to_i2c_client(dev); + struct ili210x *priv = i2c_get_clientdata(client); + + /* Calibrate is present on all ILI2xxx which have calibrate register */ + if (attr == &dev_attr_calibrate.attr) + return priv->chip->has_calibrate_reg ? attr->mode : 0; + + /* Firmware/Kernel/Protocol/BootMode is implememted only for ILI251x */ + if (!priv->chip->has_firmware_proto) + return 0; + + return attr->mode; +} + +static const struct attribute_group ili210x_attr_group = { + .attrs = ili210x_attributes, + .is_visible = ili210x_attributes_visible, +}; + +static void ili210x_power_down(void *data) +{ + struct gpio_desc *reset_gpio = data; + + gpiod_set_value_cansleep(reset_gpio, 1); +} + +static void ili210x_stop(void *data) +{ + struct ili210x *priv = data; + + /* Tell ISR to quit even if there is a contact. */ + priv->stop = true; +} + +static int ili210x_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + const struct ili2xxx_chip *chip; + struct ili210x *priv; + struct gpio_desc *reset_gpio; + struct input_dev *input; + int error; + unsigned int max_xy; + + dev_dbg(dev, "Probing for ILI210X I2C Touschreen driver"); + + chip = device_get_match_data(dev); + if (!chip && id) + chip = (const struct ili2xxx_chip *)id->driver_data; + if (!chip) { + dev_err(&client->dev, "unknown device model\n"); + return -ENODEV; + } + + if (client->irq <= 0) { + dev_err(dev, "No IRQ!\n"); + return -EINVAL; + } + + reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(reset_gpio)) + return PTR_ERR(reset_gpio); + + if (reset_gpio) { + error = devm_add_action_or_reset(dev, ili210x_power_down, + reset_gpio); + if (error) + return error; + + ili210x_hardware_reset(reset_gpio); + } + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + input = devm_input_allocate_device(dev); + if (!input) + return -ENOMEM; + + priv->client = client; + priv->input = input; + priv->reset_gpio = reset_gpio; + priv->chip = chip; + i2c_set_clientdata(client, priv); + + /* Setup input device */ + input->name = "ILI210x Touchscreen"; + input->id.bustype = BUS_I2C; + + /* Multi touch */ + max_xy = (chip->resolution ?: SZ_64K) - 1; + input_set_abs_params(input, ABS_MT_POSITION_X, 0, max_xy, 0, 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, 0, max_xy, 0, 0); + if (priv->chip->has_pressure_reg) + input_set_abs_params(input, ABS_MT_PRESSURE, 0, 0xa, 0, 0); + error = ili251x_firmware_update_cached_state(dev); + if (error) { + dev_err(dev, "Unable to cache firmware information, err: %d\n", + error); + return error; + } + touchscreen_parse_properties(input, true, &priv->prop); + + error = input_mt_init_slots(input, priv->chip->max_touches, + INPUT_MT_DIRECT); + if (error) { + dev_err(dev, "Unable to set up slots, err: %d\n", error); + return error; + } + + error = devm_request_threaded_irq(dev, client->irq, NULL, ili210x_irq, + IRQF_ONESHOT, client->name, priv); + if (error) { + dev_err(dev, "Unable to request touchscreen IRQ, err: %d\n", + error); + return error; + } + + error = devm_add_action_or_reset(dev, ili210x_stop, priv); + if (error) + return error; + + error = devm_device_add_group(dev, &ili210x_attr_group); + if (error) { + dev_err(dev, "Unable to create sysfs attributes, err: %d\n", + error); + return error; + } + + error = input_register_device(priv->input); + if (error) { + dev_err(dev, "Cannot register input device, err: %d\n", error); + return error; + } + + return 0; +} + +static const struct i2c_device_id ili210x_i2c_id[] = { + { "ili210x", (long)&ili210x_chip }, + { "ili2117", (long)&ili211x_chip }, + { "ili2120", (long)&ili212x_chip }, + { "ili251x", (long)&ili251x_chip }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ili210x_i2c_id); + +static const struct of_device_id ili210x_dt_ids[] = { + { .compatible = "ilitek,ili210x", .data = &ili210x_chip }, + { .compatible = "ilitek,ili2117", .data = &ili211x_chip }, + { .compatible = "ilitek,ili2120", .data = &ili212x_chip }, + { .compatible = "ilitek,ili251x", .data = &ili251x_chip }, + { } +}; +MODULE_DEVICE_TABLE(of, ili210x_dt_ids); + +static struct i2c_driver ili210x_ts_driver = { + .driver = { + .name = "ili210x_i2c", + .of_match_table = ili210x_dt_ids, + }, + .id_table = ili210x_i2c_id, + .probe = ili210x_i2c_probe, +}; + +module_i2c_driver(ili210x_ts_driver); + +MODULE_AUTHOR("Olivier Sobrie <olivier@sobrie.be>"); +MODULE_DESCRIPTION("ILI210X I2C Touchscreen Driver"); +MODULE_LICENSE("GPL"); |