Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 107 insertions, 0 deletions

diff --git a/drivers/interconnect/qcom/icc-rpm.h b/drivers/interconnect/qcom/icc-rpm.h
new file mode 100644
index 000000000..02257b0d3
--- /dev/null
+++ b/drivers/interconnect/qcom/icc-rpm.h
@@ -0,0 +1,107 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 Linaro Ltd
+ */
+
+#ifndef __DRIVERS_INTERCONNECT_QCOM_ICC_RPM_H
+#define __DRIVERS_INTERCONNECT_QCOM_ICC_RPM_H
+
+#include <dt-bindings/interconnect/qcom,icc.h>
+
+#define RPM_BUS_MASTER_REQ	0x73616d62
+#define RPM_BUS_SLAVE_REQ	0x766c7362
+
+#define to_qcom_provider(_provider) \
+	container_of(_provider, struct qcom_icc_provider, provider)
+
+enum qcom_icc_type {
+	QCOM_ICC_NOC,
+	QCOM_ICC_BIMC,
+	QCOM_ICC_QNOC,
+};
+
+/**
+ * struct qcom_icc_provider - Qualcomm specific interconnect provider
+ * @provider: generic interconnect provider
+ * @bus_clks: the clk_bulk_data table of bus clocks
+ * @num_clks: the total number of clk_bulk_data entries
+ * @type: the ICC provider type
+ * @qos_offset: offset to QoS registers
+ * @regmap: regmap for QoS registers read/write access
+ * @bus_clk_rate: bus clock rate in Hz
+ */
+struct qcom_icc_provider {
+	struct icc_provider provider;
+	int num_clks;
+	enum qcom_icc_type type;
+	struct regmap *regmap;
+	unsigned int qos_offset;
+	u64 *bus_clk_rate;
+	struct clk_bulk_data bus_clks[];
+};
+
+/**
+ * struct qcom_icc_qos - Qualcomm specific interconnect QoS parameters
+ * @areq_prio: node requests priority
+ * @prio_level: priority level for bus communication
+ * @limit_commands: activate/deactivate limiter mode during runtime
+ * @ap_owned: indicates if the node is owned by the AP or by the RPM
+ * @qos_mode: default qos mode for this node
+ * @qos_port: qos port number for finding qos registers of this node
+ * @urg_fwd_en: enable urgent forwarding
+ */
+struct qcom_icc_qos {
+	u32 areq_prio;
+	u32 prio_level;
+	bool limit_commands;
+	bool ap_owned;
+	int qos_mode;
+	int qos_port;
+	bool urg_fwd_en;
+};
+
+/**
+ * struct qcom_icc_node - Qualcomm specific interconnect nodes
+ * @name: the node name used in debugfs
+ * @id: a unique node identifier
+ * @links: an array of nodes where we can go next while traversing
+ * @num_links: the total number of @links
+ * @buswidth: width of the interconnect between a node and the bus (bytes)
+ * @sum_avg: current sum aggregate value of all avg bw requests
+ * @max_peak: current max aggregate value of all peak bw requests
+ * @mas_rpm_id:	RPM id for devices that are bus masters
+ * @slv_rpm_id:	RPM id for devices that are bus slaves
+ * @qos: NoC QoS setting parameters
+ */
+struct qcom_icc_node {
+	unsigned char *name;
+	u16 id;
+	const u16 *links;
+	u16 num_links;
+	u16 buswidth;
+	u64 sum_avg[QCOM_ICC_NUM_BUCKETS];
+	u64 max_peak[QCOM_ICC_NUM_BUCKETS];
+	int mas_rpm_id;
+	int slv_rpm_id;
+	struct qcom_icc_qos qos;
+};
+
+struct qcom_icc_desc {
+	struct qcom_icc_node * const *nodes;
+	size_t num_nodes;
+	const char * const *clocks;
+	size_t num_clocks;
+	enum qcom_icc_type type;
+	const struct regmap_config *regmap_cfg;
+	unsigned int qos_offset;
+};
+
+/* Valid for both NoC and BIMC */
+#define NOC_QOS_MODE_INVALID		-1
+#define NOC_QOS_MODE_FIXED		0x0
+#define NOC_QOS_MODE_BYPASS		0x2
+
+int qnoc_probe(struct platform_device *pdev);
+int qnoc_remove(struct platform_device *pdev);
+
+#endif