Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 559 insertions, 0 deletions

diff --git a/drivers/macintosh/therm_windtunnel.c b/drivers/macintosh/therm_windtunnel.c
new file mode 100644
index 000000000..b8228ca40
--- /dev/null
+++ b/drivers/macintosh/therm_windtunnel.c
@@ -0,0 +1,559 @@
+/* 
+ *   Creation Date: <2003/03/14 20:54:13 samuel>
+ *   Time-stamp: <2004/03/20 14:20:59 samuel>
+ *   
+ *	<therm_windtunnel.c>
+ *	
+ *	The G4 "windtunnel" has a single fan controlled by an
+ *	ADM1030 fan controller and a DS1775 thermostat.
+ *
+ *	The fan controller is equipped with a temperature sensor
+ *	which measures the case temperature. The DS1775 sensor
+ *	measures the CPU temperature. This driver tunes the
+ *	behavior of the fan. It is based upon empirical observations
+ *	of the 'AppleFan' driver under Mac OS X.
+ *
+ *	WARNING: This driver has only been testen on Apple's
+ *	1.25 MHz Dual G4 (March 03). It is tuned for a CPU
+ *	temperature around 57 C.
+ *
+ *   Copyright (C) 2003, 2004 Samuel Rydh (samuel@ibrium.se)
+ *
+ *   Loosely based upon 'thermostat.c' written by Benjamin Herrenschmidt
+ *   
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation
+ *   
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kthread.h>
+#include <linux/of_platform.h>
+
+#include <asm/machdep.h>
+#include <asm/io.h>
+#include <asm/sections.h>
+#include <asm/macio.h>
+
+#define LOG_TEMP		0			/* continuously log temperature */
+
+static struct {
+	volatile int		running;
+	struct task_struct	*poll_task;
+	
+	struct mutex	 	lock;
+	struct platform_device	*of_dev;
+	
+	struct i2c_client	*thermostat;
+	struct i2c_client	*fan;
+
+	int			overheat_temp;		/* 100% fan at this temp */
+	int			overheat_hyst;
+	int			temp;
+	int			casetemp;
+	int			fan_level;		/* active fan_table setting */
+
+	int			downind;
+	int			upind;
+
+	int			r0, r1, r20, r23, r25;	/* saved register */
+} x;
+
+#define T(x,y)			(((x)<<8) | (y)*0x100/10 )
+
+static struct {
+	int			fan_down_setting;
+	int			temp;
+	int			fan_up_setting;
+} fan_table[] = {
+	{ 11, T(0,0),  11 },	/* min fan */
+	{ 11, T(55,0), 11 },
+	{  6, T(55,3), 11 },
+	{  7, T(56,0), 11 },
+	{  8, T(57,0), 8 },
+	{  7, T(58,3), 7 },
+	{  6, T(58,8), 6 },
+	{  5, T(59,2), 5 },
+	{  4, T(59,6), 4 },
+	{  3, T(59,9), 3 },
+	{  2, T(60,1), 2 },
+	{  1, 0xfffff, 1 }	/* on fire */
+};
+
+static void
+print_temp( const char *s, int temp )
+{
+	printk("%s%d.%d C", s ? s : "", temp>>8, (temp & 255)*10/256 );
+}
+
+static ssize_t
+show_cpu_temperature( struct device *dev, struct device_attribute *attr, char *buf )
+{
+	return sprintf(buf, "%d.%d\n", x.temp>>8, (x.temp & 255)*10/256 );
+}
+
+static ssize_t
+show_case_temperature( struct device *dev, struct device_attribute *attr, char *buf )
+{
+	return sprintf(buf, "%d.%d\n", x.casetemp>>8, (x.casetemp & 255)*10/256 );
+}
+
+static DEVICE_ATTR(cpu_temperature, S_IRUGO, show_cpu_temperature, NULL );
+static DEVICE_ATTR(case_temperature, S_IRUGO, show_case_temperature, NULL );
+
+
+
+/************************************************************************/
+/*	controller thread						*/
+/************************************************************************/
+
+static int
+write_reg( struct i2c_client *cl, int reg, int data, int len )
+{
+	u8 tmp[3];
+
+	if( len < 1 || len > 2 || data < 0 )
+		return -EINVAL;
+
+	tmp[0] = reg;
+	tmp[1] = (len == 1) ? data : (data >> 8);
+	tmp[2] = data;
+	len++;
+	
+	if( i2c_master_send(cl, tmp, len) != len )
+		return -ENODEV;
+	return 0;
+}
+
+static int
+read_reg( struct i2c_client *cl, int reg, int len )
+{
+	u8 buf[2];
+
+	if( len != 1 && len != 2 )
+		return -EINVAL;
+	buf[0] = reg;
+	if( i2c_master_send(cl, buf, 1) != 1 )
+		return -ENODEV;
+	if( i2c_master_recv(cl, buf, len) != len )
+		return -ENODEV;
+	return (len == 2)? ((unsigned int)buf[0] << 8) | buf[1] : buf[0];
+}
+
+static void
+tune_fan( int fan_setting )
+{
+	int val = (fan_setting << 3) | 7;
+
+	/* write_reg( x.fan, 0x24, val, 1 ); */
+	write_reg( x.fan, 0x25, val, 1 );
+	write_reg( x.fan, 0x20, 0, 1 );
+	print_temp("CPU-temp: ", x.temp );
+	if( x.casetemp )
+		print_temp(", Case: ", x.casetemp );
+	printk(",  Fan: %d (tuned %+d)\n", 11-fan_setting, x.fan_level-fan_setting );
+
+	x.fan_level = fan_setting;
+}
+
+static void
+poll_temp( void )
+{
+	int temp, i, level, casetemp;
+
+	temp = read_reg( x.thermostat, 0, 2 );
+
+	/* this actually occurs when the computer is loaded */
+	if( temp < 0 )
+		return;
+
+	casetemp = read_reg(x.fan, 0x0b, 1) << 8;
+	casetemp |= (read_reg(x.fan, 0x06, 1) & 0x7) << 5;
+
+	if( LOG_TEMP && x.temp != temp ) {
+		print_temp("CPU-temp: ", temp );
+		print_temp(", Case: ", casetemp );
+		printk(",  Fan: %d\n", 11-x.fan_level );
+	}
+	x.temp = temp;
+	x.casetemp = casetemp;
+
+	level = -1;
+	for( i=0; (temp & 0xffff) > fan_table[i].temp ; i++ )
+		;
+	if( i < x.downind )
+		level = fan_table[i].fan_down_setting;
+	x.downind = i;
+
+	for( i=0; (temp & 0xffff) >= fan_table[i+1].temp ; i++ )
+		;
+	if( x.upind < i )
+		level = fan_table[i].fan_up_setting;
+	x.upind = i;
+
+	if( level >= 0 )
+		tune_fan( level );
+}
+
+
+static void
+setup_hardware( void )
+{
+	int val;
+	int err;
+
+	/* save registers (if we unload the module) */
+	x.r0 = read_reg( x.fan, 0x00, 1 );
+	x.r1 = read_reg( x.fan, 0x01, 1 );
+	x.r20 = read_reg( x.fan, 0x20, 1 );
+	x.r23 = read_reg( x.fan, 0x23, 1 );
+	x.r25 = read_reg( x.fan, 0x25, 1 );
+
+	/* improve measurement resolution (convergence time 1.5s) */
+	if( (val=read_reg(x.thermostat, 1, 1)) >= 0 ) {
+		val |= 0x60;
+		if( write_reg( x.thermostat, 1, val, 1 ) )
+			printk("Failed writing config register\n");
+	}
+	/* disable interrupts and TAC input */
+	write_reg( x.fan, 0x01, 0x01, 1 );
+	/* enable filter */
+	write_reg( x.fan, 0x23, 0x91, 1 );
+	/* remote temp. controls fan */
+	write_reg( x.fan, 0x00, 0x95, 1 );
+
+	/* The thermostat (which besides measureing temperature controls
+	 * has a THERM output which puts the fan on 100%) is usually
+	 * set to kick in at 80 C (chip default). We reduce this a bit
+	 * to be on the safe side (OSX doesn't)...
+	 */
+	if( x.overheat_temp == (80 << 8) ) {
+		x.overheat_temp = 75 << 8;
+		x.overheat_hyst = 70 << 8;
+		write_reg( x.thermostat, 2, x.overheat_hyst, 2 );
+		write_reg( x.thermostat, 3, x.overheat_temp, 2 );
+
+		print_temp("Reducing overheating limit to ", x.overheat_temp );
+		print_temp(" (Hyst: ", x.overheat_hyst );
+		printk(")\n");
+	}
+
+	/* set an initial fan setting */
+	x.downind = 0xffff;
+	x.upind = -1;
+	/* tune_fan( fan_up_table[x.upind].fan_setting ); */
+
+	err = device_create_file( &x.of_dev->dev, &dev_attr_cpu_temperature );
+	err |= device_create_file( &x.of_dev->dev, &dev_attr_case_temperature );
+	if (err)
+		printk(KERN_WARNING
+			"Failed to create temperature attribute file(s).\n");
+}
+
+static void
+restore_regs( void )
+{
+	device_remove_file( &x.of_dev->dev, &dev_attr_cpu_temperature );
+	device_remove_file( &x.of_dev->dev, &dev_attr_case_temperature );
+
+	write_reg( x.fan, 0x01, x.r1, 1 );
+	write_reg( x.fan, 0x20, x.r20, 1 );
+	write_reg( x.fan, 0x23, x.r23, 1 );
+	write_reg( x.fan, 0x25, x.r25, 1 );
+	write_reg( x.fan, 0x00, x.r0, 1 );
+}
+
+static int control_loop(void *dummy)
+{
+	mutex_lock(&x.lock);
+	setup_hardware();
+	mutex_unlock(&x.lock);
+
+	for (;;) {
+		msleep_interruptible(8000);
+		if (kthread_should_stop())
+			break;
+
+		mutex_lock(&x.lock);
+		poll_temp();
+		mutex_unlock(&x.lock);
+	}
+
+	mutex_lock(&x.lock);
+	restore_regs();
+	mutex_unlock(&x.lock);
+
+	return 0;
+}
+
+
+/************************************************************************/
+/*	i2c probing and setup						*/
+/************************************************************************/
+
+static void do_attach(struct i2c_adapter *adapter)
+{
+	struct i2c_board_info info = { };
+	struct device_node *np;
+
+	/* scan 0x48-0x4f (DS1775) and 0x2c-2x2f (ADM1030) */
+	static const unsigned short scan_ds1775[] = {
+		0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f,
+		I2C_CLIENT_END
+	};
+	static const unsigned short scan_adm1030[] = {
+		0x2c, 0x2d, 0x2e, 0x2f,
+		I2C_CLIENT_END
+	};
+
+	if (x.running || strncmp(adapter->name, "uni-n", 5))
+		return;
+
+	of_node_get(adapter->dev.of_node);
+	np = of_find_compatible_node(adapter->dev.of_node, NULL, "MAC,ds1775");
+	if (np) {
+		of_node_put(np);
+	} else {
+		strscpy(info.type, "MAC,ds1775", I2C_NAME_SIZE);
+		i2c_new_scanned_device(adapter, &info, scan_ds1775, NULL);
+	}
+
+	of_node_get(adapter->dev.of_node);
+	np = of_find_compatible_node(adapter->dev.of_node, NULL, "MAC,adm1030");
+	if (np) {
+		of_node_put(np);
+	} else {
+		strscpy(info.type, "MAC,adm1030", I2C_NAME_SIZE);
+		i2c_new_scanned_device(adapter, &info, scan_adm1030, NULL);
+	}
+}
+
+static void
+do_remove(struct i2c_client *client)
+{
+	if (x.running) {
+		x.running = 0;
+		kthread_stop(x.poll_task);
+		x.poll_task = NULL;
+	}
+	if (client == x.thermostat)
+		x.thermostat = NULL;
+	else if (client == x.fan)
+		x.fan = NULL;
+	else
+		printk(KERN_ERR "g4fan: bad client\n");
+}
+
+static int
+attach_fan( struct i2c_client *cl )
+{
+	if( x.fan )
+		goto out;
+
+	/* check that this is an ADM1030 */
+	if( read_reg(cl, 0x3d, 1) != 0x30 || read_reg(cl, 0x3e, 1) != 0x41 )
+		goto out;
+	printk("ADM1030 fan controller [@%02x]\n", cl->addr );
+
+	x.fan = cl;
+ out:
+	return 0;
+}
+
+static int
+attach_thermostat( struct i2c_client *cl ) 
+{
+	int hyst_temp, os_temp, temp;
+
+	if( x.thermostat )
+		goto out;
+
+	if( (temp=read_reg(cl, 0, 2)) < 0 )
+		goto out;
+	
+	/* temperature sanity check */
+	if( temp < 0x1600 || temp > 0x3c00 )
+		goto out;
+	hyst_temp = read_reg(cl, 2, 2);
+	os_temp = read_reg(cl, 3, 2);
+	if( hyst_temp < 0 || os_temp < 0 )
+		goto out;
+
+	printk("DS1775 digital thermometer [@%02x]\n", cl->addr );
+	print_temp("Temp: ", temp );
+	print_temp("  Hyst: ", hyst_temp );
+	print_temp("  OS: ", os_temp );
+	printk("\n");
+
+	x.temp = temp;
+	x.overheat_temp = os_temp;
+	x.overheat_hyst = hyst_temp;
+	x.thermostat = cl;
+out:
+	return 0;
+}
+
+enum chip { ds1775, adm1030 };
+
+static const struct i2c_device_id therm_windtunnel_id[] = {
+	{ "MAC,ds1775", ds1775 },
+	{ "MAC,adm1030", adm1030 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, therm_windtunnel_id);
+
+static int
+do_probe(struct i2c_client *cl, const struct i2c_device_id *id)
+{
+	struct i2c_adapter *adapter = cl->adapter;
+	int ret = 0;
+
+	if( !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA
+				     | I2C_FUNC_SMBUS_WRITE_BYTE) )
+		return 0;
+
+	switch (id->driver_data) {
+	case adm1030:
+		ret = attach_fan(cl);
+		break;
+	case ds1775:
+		ret = attach_thermostat(cl);
+		break;
+	}
+
+	if (!x.running && x.thermostat && x.fan) {
+		x.running = 1;
+		x.poll_task = kthread_run(control_loop, NULL, "g4fand");
+	}
+
+	return ret;
+}
+
+static struct i2c_driver g4fan_driver = {
+	.driver = {
+		.name	= "therm_windtunnel",
+	},
+	.probe		= do_probe,
+	.remove		= do_remove,
+	.id_table	= therm_windtunnel_id,
+};
+
+
+/************************************************************************/
+/*	initialization / cleanup					*/
+/************************************************************************/
+
+static int therm_of_probe(struct platform_device *dev)
+{
+	struct i2c_adapter *adap;
+	int ret, i = 0;
+
+	adap = i2c_get_adapter(0);
+	if (!adap)
+		return -EPROBE_DEFER;
+
+	ret = i2c_add_driver(&g4fan_driver);
+	if (ret) {
+		i2c_put_adapter(adap);
+		return ret;
+	}
+
+	/* We assume Macs have consecutive I2C bus numbers starting at 0 */
+	while (adap) {
+		do_attach(adap);
+		if (x.running)
+			return 0;
+		i2c_put_adapter(adap);
+		adap = i2c_get_adapter(++i);
+	}
+
+	return -ENODEV;
+}
+
+static int
+therm_of_remove( struct platform_device *dev )
+{
+	i2c_del_driver( &g4fan_driver );
+	return 0;
+}
+
+static const struct of_device_id therm_of_match[] = {{
+	.name		= "fan",
+	.compatible	= "adm1030"
+    }, {}
+};
+MODULE_DEVICE_TABLE(of, therm_of_match);
+
+static struct platform_driver therm_of_driver = {
+	.driver = {
+		.name = "temperature",
+		.of_match_table = therm_of_match,
+	},
+	.probe		= therm_of_probe,
+	.remove		= therm_of_remove,
+};
+
+struct apple_thermal_info {
+	u8		id;			/* implementation ID */
+	u8		fan_count;		/* number of fans */
+	u8		thermostat_count;	/* number of thermostats */
+	u8		unused;
+};
+
+static int __init
+g4fan_init( void )
+{
+	const struct apple_thermal_info *info;
+	struct device_node *np;
+
+	mutex_init(&x.lock);
+
+	if( !(np=of_find_node_by_name(NULL, "power-mgt")) )
+		return -ENODEV;
+	info = of_get_property(np, "thermal-info", NULL);
+	of_node_put(np);
+
+	if( !info || !of_machine_is_compatible("PowerMac3,6") )
+		return -ENODEV;
+
+	if( info->id != 3 ) {
+		printk(KERN_ERR "therm_windtunnel: unsupported thermal design %d\n", info->id );
+		return -ENODEV;
+	}
+	if( !(np=of_find_node_by_name(NULL, "fan")) )
+		return -ENODEV;
+	x.of_dev = of_platform_device_create(np, "temperature", NULL);
+	of_node_put( np );
+
+	if( !x.of_dev ) {
+		printk(KERN_ERR "Can't register fan controller!\n");
+		return -ENODEV;
+	}
+
+	platform_driver_register( &therm_of_driver );
+	return 0;
+}
+
+static void __exit
+g4fan_exit( void )
+{
+	platform_driver_unregister( &therm_of_driver );
+
+	if( x.of_dev )
+		of_device_unregister( x.of_dev );
+}
+
+module_init(g4fan_init);
+module_exit(g4fan_exit);
+
+MODULE_AUTHOR("Samuel Rydh <samuel@ibrium.se>");
+MODULE_DESCRIPTION("Apple G4 (windtunnel) fan controller");
+MODULE_LICENSE("GPL");