Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 661 insertions, 0 deletions

diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig
new file mode 100644
index 000000000..db0e97020
--- /dev/null
+++ b/drivers/md/Kconfig
@@ -0,0 +1,661 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Block device driver configuration
+#
+
+menuconfig MD
+	bool "Multiple devices driver support (RAID and LVM)"
+	depends on BLOCK
+	select SRCU
+	help
+	  Support multiple physical spindles through a single logical device.
+	  Required for RAID and logical volume management.
+
+if MD
+
+config BLK_DEV_MD
+	tristate "RAID support"
+	select BLOCK_HOLDER_DEPRECATED if SYSFS
+	# BLOCK_LEGACY_AUTOLOAD requirement should be removed
+	# after relevant mdadm enhancements - to make "names=yes"
+	# the default - are widely available.
+	select BLOCK_LEGACY_AUTOLOAD
+	help
+	  This driver lets you combine several hard disk partitions into one
+	  logical block device. This can be used to simply append one
+	  partition to another one or to combine several redundant hard disks
+	  into a RAID1/4/5 device so as to provide protection against hard
+	  disk failures. This is called "Software RAID" since the combining of
+	  the partitions is done by the kernel. "Hardware RAID" means that the
+	  combining is done by a dedicated controller; if you have such a
+	  controller, you do not need to say Y here.
+
+	  More information about Software RAID on Linux is contained in the
+	  Software RAID mini-HOWTO, available from
+	  <https://www.tldp.org/docs.html#howto>. There you will also learn
+	  where to get the supporting user space utilities raidtools.
+
+	  If unsure, say N.
+
+config MD_AUTODETECT
+	bool "Autodetect RAID arrays during kernel boot"
+	depends on BLK_DEV_MD=y
+	default y
+	help
+	  If you say Y here, then the kernel will try to autodetect raid
+	  arrays as part of its boot process.
+
+	  If you don't use raid and say Y, this autodetection can cause
+	  a several-second delay in the boot time due to various
+	  synchronisation steps that are part of this step.
+
+	  If unsure, say Y.
+
+config MD_LINEAR
+	tristate "Linear (append) mode (deprecated)"
+	depends on BLK_DEV_MD
+	help
+	  If you say Y here, then your multiple devices driver will be able to
+	  use the so-called linear mode, i.e. it will combine the hard disk
+	  partitions by simply appending one to the other.
+
+	  To compile this as a module, choose M here: the module
+	  will be called linear.
+
+	  If unsure, say Y.
+
+config MD_RAID0
+	tristate "RAID-0 (striping) mode"
+	depends on BLK_DEV_MD
+	help
+	  If you say Y here, then your multiple devices driver will be able to
+	  use the so-called raid0 mode, i.e. it will combine the hard disk
+	  partitions into one logical device in such a fashion as to fill them
+	  up evenly, one chunk here and one chunk there. This will increase
+	  the throughput rate if the partitions reside on distinct disks.
+
+	  Information about Software RAID on Linux is contained in the
+	  Software-RAID mini-HOWTO, available from
+	  <https://www.tldp.org/docs.html#howto>. There you will also
+	  learn where to get the supporting user space utilities raidtools.
+
+	  To compile this as a module, choose M here: the module
+	  will be called raid0.
+
+	  If unsure, say Y.
+
+config MD_RAID1
+	tristate "RAID-1 (mirroring) mode"
+	depends on BLK_DEV_MD
+	help
+	  A RAID-1 set consists of several disk drives which are exact copies
+	  of each other.  In the event of a mirror failure, the RAID driver
+	  will continue to use the operational mirrors in the set, providing
+	  an error free MD (multiple device) to the higher levels of the
+	  kernel.  In a set with N drives, the available space is the capacity
+	  of a single drive, and the set protects against a failure of (N - 1)
+	  drives.
+
+	  Information about Software RAID on Linux is contained in the
+	  Software-RAID mini-HOWTO, available from
+	  <https://www.tldp.org/docs.html#howto>.  There you will also
+	  learn where to get the supporting user space utilities raidtools.
+
+	  If you want to use such a RAID-1 set, say Y.  To compile this code
+	  as a module, choose M here: the module will be called raid1.
+
+	  If unsure, say Y.
+
+config MD_RAID10
+	tristate "RAID-10 (mirrored striping) mode"
+	depends on BLK_DEV_MD
+	help
+	  RAID-10 provides a combination of striping (RAID-0) and
+	  mirroring (RAID-1) with easier configuration and more flexible
+	  layout.
+	  Unlike RAID-0, but like RAID-1, RAID-10 requires all devices to
+	  be the same size (or at least, only as much as the smallest device
+	  will be used).
+	  RAID-10 provides a variety of layouts that provide different levels
+	  of redundancy and performance.
+
+	  RAID-10 requires mdadm-1.7.0 or later, available at:
+
+	  https://www.kernel.org/pub/linux/utils/raid/mdadm/
+
+	  If unsure, say Y.
+
+config MD_RAID456
+	tristate "RAID-4/RAID-5/RAID-6 mode"
+	depends on BLK_DEV_MD
+	select RAID6_PQ
+	select LIBCRC32C
+	select ASYNC_MEMCPY
+	select ASYNC_XOR
+	select ASYNC_PQ
+	select ASYNC_RAID6_RECOV
+	help
+	  A RAID-5 set of N drives with a capacity of C MB per drive provides
+	  the capacity of C * (N - 1) MB, and protects against a failure
+	  of a single drive. For a given sector (row) number, (N - 1) drives
+	  contain data sectors, and one drive contains the parity protection.
+	  For a RAID-4 set, the parity blocks are present on a single drive,
+	  while a RAID-5 set distributes the parity across the drives in one
+	  of the available parity distribution methods.
+
+	  A RAID-6 set of N drives with a capacity of C MB per drive
+	  provides the capacity of C * (N - 2) MB, and protects
+	  against a failure of any two drives. For a given sector
+	  (row) number, (N - 2) drives contain data sectors, and two
+	  drives contains two independent redundancy syndromes.  Like
+	  RAID-5, RAID-6 distributes the syndromes across the drives
+	  in one of the available parity distribution methods.
+
+	  Information about Software RAID on Linux is contained in the
+	  Software-RAID mini-HOWTO, available from
+	  <https://www.tldp.org/docs.html#howto>. There you will also
+	  learn where to get the supporting user space utilities raidtools.
+
+	  If you want to use such a RAID-4/RAID-5/RAID-6 set, say Y.  To
+	  compile this code as a module, choose M here: the module
+	  will be called raid456.
+
+	  If unsure, say Y.
+
+config MD_MULTIPATH
+	tristate "Multipath I/O support (deprecated)"
+	depends on BLK_DEV_MD
+	help
+	  MD_MULTIPATH provides a simple multi-path personality for use
+	  the MD framework.  It is not under active development.  New
+	  projects should consider using DM_MULTIPATH which has more
+	  features and more testing.
+
+	  If unsure, say N.
+
+config MD_FAULTY
+	tristate "Faulty test module for MD (deprecated)"
+	depends on BLK_DEV_MD
+	help
+	  The "faulty" module allows for a block device that occasionally returns
+	  read or write errors.  It is useful for testing.
+
+	  In unsure, say N.
+
+
+config MD_CLUSTER
+	tristate "Cluster Support for MD"
+	depends on BLK_DEV_MD
+	depends on DLM
+	default n
+	help
+	Clustering support for MD devices. This enables locking and
+	synchronization across multiple systems on the cluster, so all
+	nodes in the cluster can access the MD devices simultaneously.
+
+	This brings the redundancy (and uptime) of RAID levels across the
+	nodes of the cluster. Currently, it can work with raid1 and raid10
+	(limited support).
+
+	If unsure, say N.
+
+source "drivers/md/bcache/Kconfig"
+
+config BLK_DEV_DM_BUILTIN
+	bool
+
+config BLK_DEV_DM
+	tristate "Device mapper support"
+	select BLOCK_HOLDER_DEPRECATED if SYSFS
+	select BLK_DEV_DM_BUILTIN
+	select BLK_MQ_STACKING
+	depends on DAX || DAX=n
+	help
+	  Device-mapper is a low level volume manager.  It works by allowing
+	  people to specify mappings for ranges of logical sectors.  Various
+	  mapping types are available, in addition people may write their own
+	  modules containing custom mappings if they wish.
+
+	  Higher level volume managers such as LVM2 use this driver.
+
+	  To compile this as a module, choose M here: the module will be
+	  called dm-mod.
+
+	  If unsure, say N.
+
+config DM_DEBUG
+	bool "Device mapper debugging support"
+	depends on BLK_DEV_DM
+	help
+	  Enable this for messages that may help debug device-mapper problems.
+
+	  If unsure, say N.
+
+config DM_BUFIO
+       tristate
+       depends on BLK_DEV_DM
+	help
+	 This interface allows you to do buffered I/O on a device and acts
+	 as a cache, holding recently-read blocks in memory and performing
+	 delayed writes.
+
+config DM_DEBUG_BLOCK_MANAGER_LOCKING
+       bool "Block manager locking"
+       depends on DM_BUFIO
+	help
+	 Block manager locking can catch various metadata corruption issues.
+
+	 If unsure, say N.
+
+config DM_DEBUG_BLOCK_STACK_TRACING
+       bool "Keep stack trace of persistent data block lock holders"
+       depends on STACKTRACE_SUPPORT && DM_DEBUG_BLOCK_MANAGER_LOCKING
+       select STACKTRACE
+	help
+	 Enable this for messages that may help debug problems with the
+	 block manager locking used by thin provisioning and caching.
+
+	 If unsure, say N.
+
+config DM_BIO_PRISON
+       tristate
+       depends on BLK_DEV_DM
+	help
+	 Some bio locking schemes used by other device-mapper targets
+	 including thin provisioning.
+
+source "drivers/md/persistent-data/Kconfig"
+
+config DM_UNSTRIPED
+       tristate "Unstriped target"
+       depends on BLK_DEV_DM
+	help
+	  Unstripes I/O so it is issued solely on a single drive in a HW
+	  RAID0 or dm-striped target.
+
+config DM_CRYPT
+	tristate "Crypt target support"
+	depends on BLK_DEV_DM
+	depends on (ENCRYPTED_KEYS || ENCRYPTED_KEYS=n)
+	depends on (TRUSTED_KEYS || TRUSTED_KEYS=n)
+	select CRYPTO
+	select CRYPTO_CBC
+	select CRYPTO_ESSIV
+	help
+	  This device-mapper target allows you to create a device that
+	  transparently encrypts the data on it. You'll need to activate
+	  the ciphers you're going to use in the cryptoapi configuration.
+
+	  For further information on dm-crypt and userspace tools see:
+	  <https://gitlab.com/cryptsetup/cryptsetup/wikis/DMCrypt>
+
+	  To compile this code as a module, choose M here: the module will
+	  be called dm-crypt.
+
+	  If unsure, say N.
+
+config DM_SNAPSHOT
+       tristate "Snapshot target"
+       depends on BLK_DEV_DM
+       select DM_BUFIO
+	help
+	 Allow volume managers to take writable snapshots of a device.
+
+config DM_THIN_PROVISIONING
+       tristate "Thin provisioning target"
+       depends on BLK_DEV_DM
+       select DM_PERSISTENT_DATA
+       select DM_BIO_PRISON
+	help
+	 Provides thin provisioning and snapshots that share a data store.
+
+config DM_CACHE
+       tristate "Cache target (EXPERIMENTAL)"
+       depends on BLK_DEV_DM
+       default n
+       select DM_PERSISTENT_DATA
+       select DM_BIO_PRISON
+	help
+	 dm-cache attempts to improve performance of a block device by
+	 moving frequently used data to a smaller, higher performance
+	 device.  Different 'policy' plugins can be used to change the
+	 algorithms used to select which blocks are promoted, demoted,
+	 cleaned etc.  It supports writeback and writethrough modes.
+
+config DM_CACHE_SMQ
+       tristate "Stochastic MQ Cache Policy (EXPERIMENTAL)"
+       depends on DM_CACHE
+       default y
+	help
+	 A cache policy that uses a multiqueue ordered by recent hits
+	 to select which blocks should be promoted and demoted.
+	 This is meant to be a general purpose policy.  It prioritises
+	 reads over writes.  This SMQ policy (vs MQ) offers the promise
+	 of less memory utilization, improved performance and increased
+	 adaptability in the face of changing workloads.
+
+config DM_WRITECACHE
+	tristate "Writecache target"
+	depends on BLK_DEV_DM
+	help
+	   The writecache target caches writes on persistent memory or SSD.
+	   It is intended for databases or other programs that need extremely
+	   low commit latency.
+
+	   The writecache target doesn't cache reads because reads are supposed
+	   to be cached in standard RAM.
+
+config DM_EBS
+	tristate "Emulated block size target (EXPERIMENTAL)"
+	depends on BLK_DEV_DM && !HIGHMEM
+	select DM_BUFIO
+	help
+	  dm-ebs emulates smaller logical block size on backing devices
+	  with larger ones (e.g. 512 byte sectors on 4K native disks).
+
+config DM_ERA
+       tristate "Era target (EXPERIMENTAL)"
+       depends on BLK_DEV_DM
+       default n
+       select DM_PERSISTENT_DATA
+       select DM_BIO_PRISON
+	help
+	 dm-era tracks which parts of a block device are written to
+	 over time.  Useful for maintaining cache coherency when using
+	 vendor snapshots.
+
+config DM_CLONE
+       tristate "Clone target (EXPERIMENTAL)"
+       depends on BLK_DEV_DM
+       default n
+       select DM_PERSISTENT_DATA
+	help
+	 dm-clone produces a one-to-one copy of an existing, read-only source
+	 device into a writable destination device. The cloned device is
+	 visible/mountable immediately and the copy of the source device to the
+	 destination device happens in the background, in parallel with user
+	 I/O.
+
+	 If unsure, say N.
+
+config DM_MIRROR
+       tristate "Mirror target"
+       depends on BLK_DEV_DM
+	help
+	 Allow volume managers to mirror logical volumes, also
+	 needed for live data migration tools such as 'pvmove'.
+
+config DM_LOG_USERSPACE
+	tristate "Mirror userspace logging"
+	depends on DM_MIRROR && NET
+	select CONNECTOR
+	help
+	  The userspace logging module provides a mechanism for
+	  relaying the dm-dirty-log API to userspace.  Log designs
+	  which are more suited to userspace implementation (e.g.
+	  shared storage logs) or experimental logs can be implemented
+	  by leveraging this framework.
+
+config DM_RAID
+       tristate "RAID 1/4/5/6/10 target"
+       depends on BLK_DEV_DM
+       select MD_RAID0
+       select MD_RAID1
+       select MD_RAID10
+       select MD_RAID456
+       select BLK_DEV_MD
+	help
+	 A dm target that supports RAID1, RAID10, RAID4, RAID5 and RAID6 mappings
+
+	 A RAID-5 set of N drives with a capacity of C MB per drive provides
+	 the capacity of C * (N - 1) MB, and protects against a failure
+	 of a single drive. For a given sector (row) number, (N - 1) drives
+	 contain data sectors, and one drive contains the parity protection.
+	 For a RAID-4 set, the parity blocks are present on a single drive,
+	 while a RAID-5 set distributes the parity across the drives in one
+	 of the available parity distribution methods.
+
+	 A RAID-6 set of N drives with a capacity of C MB per drive
+	 provides the capacity of C * (N - 2) MB, and protects
+	 against a failure of any two drives. For a given sector
+	 (row) number, (N - 2) drives contain data sectors, and two
+	 drives contains two independent redundancy syndromes.  Like
+	 RAID-5, RAID-6 distributes the syndromes across the drives
+	 in one of the available parity distribution methods.
+
+config DM_ZERO
+	tristate "Zero target"
+	depends on BLK_DEV_DM
+	help
+	  A target that discards writes, and returns all zeroes for
+	  reads.  Useful in some recovery situations.
+
+config DM_MULTIPATH
+	tristate "Multipath target"
+	depends on BLK_DEV_DM
+	# nasty syntax but means make DM_MULTIPATH independent
+	# of SCSI_DH if the latter isn't defined but if
+	# it is, DM_MULTIPATH must depend on it.  We get a build
+	# error if SCSI_DH=m and DM_MULTIPATH=y
+	depends on !SCSI_DH || SCSI
+	help
+	  Allow volume managers to support multipath hardware.
+
+config DM_MULTIPATH_QL
+	tristate "I/O Path Selector based on the number of in-flight I/Os"
+	depends on DM_MULTIPATH
+	help
+	  This path selector is a dynamic load balancer which selects
+	  the path with the least number of in-flight I/Os.
+
+	  If unsure, say N.
+
+config DM_MULTIPATH_ST
+	tristate "I/O Path Selector based on the service time"
+	depends on DM_MULTIPATH
+	help
+	  This path selector is a dynamic load balancer which selects
+	  the path expected to complete the incoming I/O in the shortest
+	  time.
+
+	  If unsure, say N.
+
+config DM_MULTIPATH_HST
+	tristate "I/O Path Selector based on historical service time"
+	depends on DM_MULTIPATH
+	help
+	  This path selector is a dynamic load balancer which selects
+	  the path expected to complete the incoming I/O in the shortest
+	  time by comparing estimated service time (based on historical
+	  service time).
+
+	  If unsure, say N.
+
+config DM_MULTIPATH_IOA
+	tristate "I/O Path Selector based on CPU submission"
+	depends on DM_MULTIPATH
+	help
+	  This path selector selects the path based on the CPU the IO is
+	  executed on and the CPU to path mapping setup at path addition time.
+
+	  If unsure, say N.
+
+config DM_DELAY
+	tristate "I/O delaying target"
+	depends on BLK_DEV_DM
+	help
+	A target that delays reads and/or writes and can send
+	them to different devices.  Useful for testing.
+
+	If unsure, say N.
+
+config DM_DUST
+	tristate "Bad sector simulation target"
+	depends on BLK_DEV_DM
+	help
+	A target that simulates bad sector behavior.
+	Useful for testing.
+
+	If unsure, say N.
+
+config DM_INIT
+	bool "DM \"dm-mod.create=\" parameter support"
+	depends on BLK_DEV_DM=y
+	help
+	Enable "dm-mod.create=" parameter to create mapped devices at init time.
+	This option is useful to allow mounting rootfs without requiring an
+	initramfs.
+	See Documentation/admin-guide/device-mapper/dm-init.rst for dm-mod.create="..."
+	format.
+
+	If unsure, say N.
+
+config DM_UEVENT
+	bool "DM uevents"
+	depends on BLK_DEV_DM
+	help
+	Generate udev events for DM events.
+
+config DM_FLAKEY
+       tristate "Flakey target"
+       depends on BLK_DEV_DM
+	help
+	 A target that intermittently fails I/O for debugging purposes.
+
+config DM_VERITY
+	tristate "Verity target support"
+	depends on BLK_DEV_DM
+	select CRYPTO
+	select CRYPTO_HASH
+	select DM_BUFIO
+	help
+	  This device-mapper target creates a read-only device that
+	  transparently validates the data on one underlying device against
+	  a pre-generated tree of cryptographic checksums stored on a second
+	  device.
+
+	  You'll need to activate the digests you're going to use in the
+	  cryptoapi configuration.
+
+	  To compile this code as a module, choose M here: the module will
+	  be called dm-verity.
+
+	  If unsure, say N.
+
+config DM_VERITY_VERIFY_ROOTHASH_SIG
+	def_bool n
+	bool "Verity data device root hash signature verification support"
+	depends on DM_VERITY
+	select SYSTEM_DATA_VERIFICATION
+	help
+	  Add ability for dm-verity device to be validated if the
+	  pre-generated tree of cryptographic checksums passed has a pkcs#7
+	  signature file that can validate the roothash of the tree.
+
+	  By default, rely on the builtin trusted keyring.
+
+	  If unsure, say N.
+
+config DM_VERITY_VERIFY_ROOTHASH_SIG_SECONDARY_KEYRING
+	bool "Verity data device root hash signature verification with secondary keyring"
+	depends on DM_VERITY_VERIFY_ROOTHASH_SIG
+	depends on SECONDARY_TRUSTED_KEYRING
+	help
+	  Rely on the secondary trusted keyring to verify dm-verity signatures.
+
+	  If unsure, say N.
+
+config DM_VERITY_FEC
+	bool "Verity forward error correction support"
+	depends on DM_VERITY
+	select REED_SOLOMON
+	select REED_SOLOMON_DEC8
+	help
+	  Add forward error correction support to dm-verity. This option
+	  makes it possible to use pre-generated error correction data to
+	  recover from corrupted blocks.
+
+	  If unsure, say N.
+
+config DM_SWITCH
+	tristate "Switch target support (EXPERIMENTAL)"
+	depends on BLK_DEV_DM
+	help
+	  This device-mapper target creates a device that supports an arbitrary
+	  mapping of fixed-size regions of I/O across a fixed set of paths.
+	  The path used for any specific region can be switched dynamically
+	  by sending the target a message.
+
+	  To compile this code as a module, choose M here: the module will
+	  be called dm-switch.
+
+	  If unsure, say N.
+
+config DM_LOG_WRITES
+	tristate "Log writes target support"
+	depends on BLK_DEV_DM
+	help
+	  This device-mapper target takes two devices, one device to use
+	  normally, one to log all write operations done to the first device.
+	  This is for use by file system developers wishing to verify that
+	  their fs is writing a consistent file system at all times by allowing
+	  them to replay the log in a variety of ways and to check the
+	  contents.
+
+	  To compile this code as a module, choose M here: the module will
+	  be called dm-log-writes.
+
+	  If unsure, say N.
+
+config DM_INTEGRITY
+	tristate "Integrity target support"
+	depends on BLK_DEV_DM
+	select BLK_DEV_INTEGRITY
+	select DM_BUFIO
+	select CRYPTO
+	select CRYPTO_SKCIPHER
+	select ASYNC_XOR
+	select DM_AUDIT if AUDIT
+	help
+	  This device-mapper target emulates a block device that has
+	  additional per-sector tags that can be used for storing
+	  integrity information.
+
+	  This integrity target is used with the dm-crypt target to
+	  provide authenticated disk encryption or it can be used
+	  standalone.
+
+	  To compile this code as a module, choose M here: the module will
+	  be called dm-integrity.
+
+config DM_ZONED
+	tristate "Drive-managed zoned block device target support"
+	depends on BLK_DEV_DM
+	depends on BLK_DEV_ZONED
+	select CRC32
+	help
+	  This device-mapper target takes a host-managed or host-aware zoned
+	  block device and exposes most of its capacity as a regular block
+	  device (drive-managed zoned block device) without any write
+	  constraints. This is mainly intended for use with file systems that
+	  do not natively support zoned block devices but still want to
+	  benefit from the increased capacity offered by SMR disks. Other uses
+	  by applications using raw block devices (for example object stores)
+	  are also possible.
+
+	  To compile this code as a module, choose M here: the module will
+	  be called dm-zoned.
+
+	  If unsure, say N.
+
+config DM_AUDIT
+	bool "DM audit events"
+	depends on BLK_DEV_DM
+	depends on AUDIT
+	help
+	  Generate audit events for device-mapper.
+
+	  Enables audit logging of several security relevant events in the
+	  particular device-mapper targets, especially the integrity target.
+
+endif # MD