Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 89 insertions, 0 deletions

diff --git a/drivers/media/dvb-frontends/bsbe1.h b/drivers/media/dvb-frontends/bsbe1.h
new file mode 100644
index 000000000..b4b81e1dd
--- /dev/null
+++ b/drivers/media/dvb-frontends/bsbe1.h
@@ -0,0 +1,89 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * bsbe1.h - ALPS BSBE1 tuner support
+ *
+ * the project's page is at https://linuxtv.org
+ */
+
+#ifndef BSBE1_H
+#define BSBE1_H
+
+static u8 alps_bsbe1_inittab[] = {
+	0x01, 0x15,   /* XTAL = 4MHz, VCO = 352 MHz */
+	0x02, 0x30,   /* MCLK = 88 MHz */
+	0x03, 0x00,   /* ACR output 0 */
+	0x04, 0x7d,   /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
+	0x05, 0x05,   /* I2CT = 0, SCLT = 1, SDAT = 1 */
+	0x06, 0x00,   /* DAC output 0 */
+	0x08, 0x40,   /* DiSEqC off, LNB power on OP2/LOCK pin on */
+	0x09, 0x00,   /* FIFO */
+	0x0c, 0x51,   /* OP1/OP0 normal, val = 1 (LNB power on) */
+	0x0d, 0x82,   /* DC offset compensation = on, beta_agc1 = 2 */
+	0x0f, 0x92,   /* AGC1R */
+	0x10, 0x34,   /* AGC2O */
+	0x11, 0x84,   /* TLSR */
+	0x12, 0xb9,   /* CFD */
+	0x15, 0xc9,   /* lock detector threshold */
+	0x28, 0x00,   /* out imp: normal, type: parallel, FEC mode: QPSK */
+	0x33, 0xfc,   /* RS control */
+	0x34, 0x93,   /* count viterbi bit errors per 2E18 bytes */
+	0xff, 0xff
+};
+
+
+static int alps_bsbe1_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio)
+{
+	u8 aclk = 0;
+	u8 bclk = 0;
+
+	if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; }
+	else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; }
+	else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; }
+	else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; }
+	else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; }
+	else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; }
+
+	stv0299_writereg(fe, 0x13, aclk);
+	stv0299_writereg(fe, 0x14, bclk);
+	stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
+	stv0299_writereg(fe, 0x20, (ratio >>  8) & 0xff);
+	stv0299_writereg(fe, 0x21, (ratio      ) & 0xf0);
+
+	return 0;
+}
+
+static int alps_bsbe1_tuner_set_params(struct dvb_frontend *fe)
+{
+	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+	int ret;
+	u8 data[4];
+	u32 div;
+	struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
+	struct i2c_adapter *i2c = fe->tuner_priv;
+
+	if ((p->frequency < 950000) || (p->frequency > 2150000))
+		return -EINVAL;
+
+	div = p->frequency / 1000;
+	data[0] = (div >> 8) & 0x7f;
+	data[1] = div & 0xff;
+	data[2] = 0x80 | ((div & 0x18000) >> 10) | 0x1;
+	data[3] = 0xe0;
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+	ret = i2c_transfer(i2c, &msg, 1);
+	return (ret != 1) ? -EIO : 0;
+}
+
+static struct stv0299_config alps_bsbe1_config = {
+	.demod_address = 0x68,
+	.inittab = alps_bsbe1_inittab,
+	.mclk = 88000000UL,
+	.invert = 1,
+	.skip_reinit = 0,
+	.min_delay_ms = 100,
+	.set_symbol_rate = alps_bsbe1_set_symbol_rate,
+};
+
+#endif