Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 429 insertions, 0 deletions

diff --git a/drivers/media/dvb-frontends/sp2.c b/drivers/media/dvb-frontends/sp2.c
new file mode 100644
index 000000000..27e7037e1
--- /dev/null
+++ b/drivers/media/dvb-frontends/sp2.c
@@ -0,0 +1,429 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * CIMaX SP2/SP2HF (Atmel T90FJR) CI driver
+ *
+ * Copyright (C) 2014 Olli Salonen <olli.salonen@iki.fi>
+ *
+ * Heavily based on CIMax2(R) SP2 driver in conjunction with NetUp Dual
+ * DVB-S2 CI card (cimax2) with following copyrights:
+ *
+ *  Copyright (C) 2009 NetUP Inc.
+ *  Copyright (C) 2009 Igor M. Liplianin <liplianin@netup.ru>
+ *  Copyright (C) 2009 Abylay Ospan <aospan@netup.ru>
+ */
+
+#include "sp2_priv.h"
+
+static int sp2_read_i2c(struct sp2 *s, u8 reg, u8 *buf, int len)
+{
+	int ret;
+	struct i2c_client *client = s->client;
+	struct i2c_adapter *adap = client->adapter;
+	struct i2c_msg msg[] = {
+		{
+			.addr = client->addr,
+			.flags = 0,
+			.buf = &reg,
+			.len = 1
+		}, {
+			.addr = client->addr,
+			.flags	= I2C_M_RD,
+			.buf = buf,
+			.len = len
+		}
+	};
+
+	ret = i2c_transfer(adap, msg, 2);
+
+	if (ret != 2) {
+		dev_err(&client->dev, "i2c read error, reg = 0x%02x, status = %d\n",
+				reg, ret);
+		if (ret < 0)
+			return ret;
+		else
+			return -EIO;
+	}
+
+	dev_dbg(&s->client->dev, "addr=0x%04x, reg = 0x%02x, data = %02x\n",
+				client->addr, reg, buf[0]);
+
+	return 0;
+}
+
+static int sp2_write_i2c(struct sp2 *s, u8 reg, u8 *buf, int len)
+{
+	int ret;
+	u8 buffer[35];
+	struct i2c_client *client = s->client;
+	struct i2c_adapter *adap = client->adapter;
+	struct i2c_msg msg = {
+		.addr = client->addr,
+		.flags = 0,
+		.buf = &buffer[0],
+		.len = len + 1
+	};
+
+	if ((len + 1) > sizeof(buffer)) {
+		dev_err(&client->dev, "i2c wr reg=%02x: len=%d is too big!\n",
+				reg, len);
+		return -EINVAL;
+	}
+
+	buffer[0] = reg;
+	memcpy(&buffer[1], buf, len);
+
+	ret = i2c_transfer(adap, &msg, 1);
+
+	if (ret != 1) {
+		dev_err(&client->dev, "i2c write error, reg = 0x%02x, status = %d\n",
+				reg, ret);
+		if (ret < 0)
+			return ret;
+		else
+			return -EIO;
+	}
+
+	dev_dbg(&s->client->dev, "addr=0x%04x, reg = 0x%02x, data = %*ph\n",
+				client->addr, reg, len, buf);
+
+	return 0;
+}
+
+static int sp2_ci_op_cam(struct dvb_ca_en50221 *en50221, int slot, u8 acs,
+			u8 read, int addr, u8 data)
+{
+	struct sp2 *s = en50221->data;
+	u8 store;
+	int mem, ret;
+	int (*ci_op_cam)(void*, u8, int, u8, int*) = s->ci_control;
+
+	if (slot != 0)
+		return -EINVAL;
+
+	/*
+	 * change module access type between IO space and attribute memory
+	 * when needed
+	 */
+	if (s->module_access_type != acs) {
+		ret = sp2_read_i2c(s, 0x00, &store, 1);
+
+		if (ret)
+			return ret;
+
+		store &= ~(SP2_MOD_CTL_ACS1 | SP2_MOD_CTL_ACS0);
+		store |= acs;
+
+		ret = sp2_write_i2c(s, 0x00, &store, 1);
+		if (ret)
+			return ret;
+	}
+
+	s->module_access_type = acs;
+
+	/* implementation of ci_op_cam is device specific */
+	if (ci_op_cam) {
+		ret = ci_op_cam(s->priv, read, addr, data, &mem);
+	} else {
+		dev_err(&s->client->dev, "callback not defined");
+		return -EINVAL;
+	}
+
+	if (ret)
+		return ret;
+
+	dev_dbg(&s->client->dev, "%s: slot=%d, addr=0x%04x, %s, data=%x",
+			(read) ? "read" : "write", slot, addr,
+			(acs == SP2_CI_ATTR_ACS) ? "attr" : "io",
+			(read) ? mem : data);
+
+	if (read)
+		return mem;
+	else
+		return 0;
+
+}
+
+int sp2_ci_read_attribute_mem(struct dvb_ca_en50221 *en50221,
+				int slot, int addr)
+{
+	return sp2_ci_op_cam(en50221, slot, SP2_CI_ATTR_ACS,
+			SP2_CI_RD, addr, 0);
+}
+
+int sp2_ci_write_attribute_mem(struct dvb_ca_en50221 *en50221,
+				int slot, int addr, u8 data)
+{
+	return sp2_ci_op_cam(en50221, slot, SP2_CI_ATTR_ACS,
+			SP2_CI_WR, addr, data);
+}
+
+int sp2_ci_read_cam_control(struct dvb_ca_en50221 *en50221,
+				int slot, u8 addr)
+{
+	return sp2_ci_op_cam(en50221, slot, SP2_CI_IO_ACS,
+			SP2_CI_RD, addr, 0);
+}
+
+int sp2_ci_write_cam_control(struct dvb_ca_en50221 *en50221,
+				int slot, u8 addr, u8 data)
+{
+	return sp2_ci_op_cam(en50221, slot, SP2_CI_IO_ACS,
+			SP2_CI_WR, addr, data);
+}
+
+int sp2_ci_slot_reset(struct dvb_ca_en50221 *en50221, int slot)
+{
+	struct sp2 *s = en50221->data;
+	u8 buf;
+	int ret;
+
+	dev_dbg(&s->client->dev, "slot: %d\n", slot);
+
+	if (slot != 0)
+		return -EINVAL;
+
+	/* RST on */
+	buf = SP2_MOD_CTL_RST;
+	ret = sp2_write_i2c(s, 0x00, &buf, 1);
+
+	if (ret)
+		return ret;
+
+	usleep_range(500, 600);
+
+	/* RST off */
+	buf = 0x00;
+	ret = sp2_write_i2c(s, 0x00, &buf, 1);
+
+	if (ret)
+		return ret;
+
+	msleep(1000);
+
+	return 0;
+}
+
+int sp2_ci_slot_shutdown(struct dvb_ca_en50221 *en50221, int slot)
+{
+	struct sp2 *s = en50221->data;
+
+	dev_dbg(&s->client->dev, "slot:%d\n", slot);
+
+	/* not implemented */
+	return 0;
+}
+
+int sp2_ci_slot_ts_enable(struct dvb_ca_en50221 *en50221, int slot)
+{
+	struct sp2 *s = en50221->data;
+	u8 buf;
+
+	dev_dbg(&s->client->dev, "slot:%d\n", slot);
+
+	if (slot != 0)
+		return -EINVAL;
+
+	sp2_read_i2c(s, 0x00, &buf, 1);
+
+	/* disable bypass and enable TS */
+	buf |= (SP2_MOD_CTL_TSOEN | SP2_MOD_CTL_TSIEN);
+	return sp2_write_i2c(s, 0, &buf, 1);
+}
+
+int sp2_ci_poll_slot_status(struct dvb_ca_en50221 *en50221,
+				int slot, int open)
+{
+	struct sp2 *s = en50221->data;
+	u8 buf[2];
+	int ret;
+
+	dev_dbg(&s->client->dev, "slot:%d open:%d\n", slot, open);
+
+	/*
+	 * CAM module INSERT/REMOVE processing. Slow operation because of i2c
+	 * transfers. Throttle read to one per sec.
+	 */
+	if (time_after(jiffies, s->next_status_checked_time)) {
+		ret = sp2_read_i2c(s, 0x00, buf, 1);
+		s->next_status_checked_time = jiffies +	msecs_to_jiffies(1000);
+
+		if (ret)
+			return 0;
+
+		if (buf[0] & SP2_MOD_CTL_DET)
+			s->status = DVB_CA_EN50221_POLL_CAM_PRESENT |
+					DVB_CA_EN50221_POLL_CAM_READY;
+		else
+			s->status = 0;
+	}
+
+	return s->status;
+}
+
+static int sp2_init(struct sp2 *s)
+{
+	int ret = 0;
+	u8 buf;
+	u8 cimax_init[34] = {
+		0x00, /* module A control*/
+		0x00, /* auto select mask high A */
+		0x00, /* auto select mask low A */
+		0x00, /* auto select pattern high A */
+		0x00, /* auto select pattern low A */
+		0x44, /* memory access time A, 600 ns */
+		0x00, /* invert input A */
+		0x00, /* RFU */
+		0x00, /* RFU */
+		0x00, /* module B control*/
+		0x00, /* auto select mask high B */
+		0x00, /* auto select mask low B */
+		0x00, /* auto select pattern high B */
+		0x00, /* auto select pattern low B */
+		0x44, /* memory access time B, 600 ns */
+		0x00, /* invert input B */
+		0x00, /* RFU */
+		0x00, /* RFU */
+		0x00, /* auto select mask high Ext */
+		0x00, /* auto select mask low Ext */
+		0x00, /* auto select pattern high Ext */
+		0x00, /* auto select pattern low Ext */
+		0x00, /* RFU */
+		0x02, /* destination - module A */
+		0x01, /* power control reg, VCC power on */
+		0x00, /* RFU */
+		0x00, /* int status read only */
+		0x00, /* Interrupt Mask Register */
+		0x05, /* EXTINT=active-high, INT=push-pull */
+		0x00, /* USCG1 */
+		0x04, /* ack active low */
+		0x00, /* LOCK = 0 */
+		0x22, /* unknown */
+		0x00, /* synchronization? */
+	};
+
+	dev_dbg(&s->client->dev, "\n");
+
+	s->ca.owner = THIS_MODULE;
+	s->ca.read_attribute_mem = sp2_ci_read_attribute_mem;
+	s->ca.write_attribute_mem = sp2_ci_write_attribute_mem;
+	s->ca.read_cam_control = sp2_ci_read_cam_control;
+	s->ca.write_cam_control = sp2_ci_write_cam_control;
+	s->ca.slot_reset = sp2_ci_slot_reset;
+	s->ca.slot_shutdown = sp2_ci_slot_shutdown;
+	s->ca.slot_ts_enable = sp2_ci_slot_ts_enable;
+	s->ca.poll_slot_status = sp2_ci_poll_slot_status;
+	s->ca.data = s;
+	s->module_access_type = 0;
+
+	/* initialize all regs */
+	ret = sp2_write_i2c(s, 0x00, &cimax_init[0], 34);
+	if (ret)
+		goto err;
+
+	/* lock registers */
+	buf = 1;
+	ret = sp2_write_i2c(s, 0x1f, &buf, 1);
+	if (ret)
+		goto err;
+
+	/* power on slots */
+	ret = sp2_write_i2c(s, 0x18, &buf, 1);
+	if (ret)
+		goto err;
+
+	ret = dvb_ca_en50221_init(s->dvb_adap, &s->ca, 0, 1);
+	if (ret)
+		goto err;
+
+	return 0;
+
+err:
+	dev_dbg(&s->client->dev, "init failed=%d\n", ret);
+	return ret;
+}
+
+static int sp2_exit(struct i2c_client *client)
+{
+	struct sp2 *s;
+
+	dev_dbg(&client->dev, "\n");
+
+	if (!client)
+		return 0;
+
+	s = i2c_get_clientdata(client);
+	if (!s)
+		return 0;
+
+	if (!s->ca.data)
+		return 0;
+
+	dvb_ca_en50221_release(&s->ca);
+
+	return 0;
+}
+
+static int sp2_probe(struct i2c_client *client,
+		const struct i2c_device_id *id)
+{
+	struct sp2_config *cfg = client->dev.platform_data;
+	struct sp2 *s;
+	int ret;
+
+	dev_dbg(&client->dev, "\n");
+
+	s = kzalloc(sizeof(*s), GFP_KERNEL);
+	if (!s) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	s->client = client;
+	s->dvb_adap = cfg->dvb_adap;
+	s->priv = cfg->priv;
+	s->ci_control = cfg->ci_control;
+
+	i2c_set_clientdata(client, s);
+
+	ret = sp2_init(s);
+	if (ret)
+		goto err;
+
+	dev_info(&s->client->dev, "CIMaX SP2 successfully attached\n");
+	return 0;
+err:
+	dev_dbg(&client->dev, "init failed=%d\n", ret);
+	kfree(s);
+
+	return ret;
+}
+
+static void sp2_remove(struct i2c_client *client)
+{
+	struct sp2 *s = i2c_get_clientdata(client);
+
+	dev_dbg(&client->dev, "\n");
+	sp2_exit(client);
+	kfree(s);
+}
+
+static const struct i2c_device_id sp2_id[] = {
+	{"sp2", 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, sp2_id);
+
+static struct i2c_driver sp2_driver = {
+	.driver = {
+		.name	= "sp2",
+	},
+	.probe		= sp2_probe,
+	.remove		= sp2_remove,
+	.id_table	= sp2_id,
+};
+
+module_i2c_driver(sp2_driver);
+
+MODULE_DESCRIPTION("CIMaX SP2/HF CI driver");
+MODULE_AUTHOR("Olli Salonen <olli.salonen@iki.fi>");
+MODULE_LICENSE("GPL");