Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

18 files changed, 15750 insertions, 0 deletions

diff --git a/drivers/media/pci/cx88/Kconfig b/drivers/media/pci/cx88/Kconfig
new file mode 100644
index 000000000..24e1e7c41
--- /dev/null
+++ b/drivers/media/pci/cx88/Kconfig
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config VIDEO_CX88
+	tristate "Conexant 2388x (bt878 successor) support"
+	depends on VIDEO_DEV && PCI && I2C && RC_CORE
+	select I2C_ALGOBIT
+	select VIDEOBUF2_DMA_SG
+	select VIDEO_TUNER
+	select VIDEO_TVEEPROM
+	select VIDEO_WM8775 if MEDIA_SUBDRV_AUTOSELECT
+	help
+	  This is a video4linux driver for Conexant 2388x based
+	  TV cards.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cx8800
+
+config VIDEO_CX88_ALSA
+	tristate "Conexant 2388x DMA audio support"
+	depends on VIDEO_CX88 && SND
+	select SND_PCM
+	help
+	  This is a video4linux driver for direct (DMA) audio on
+	  Conexant 2388x based TV cards using ALSA.
+
+	  It only works with boards with function 01 enabled.
+	  To check if your board supports, use lspci -n.
+	  If supported, you should see 14f1:8801 or 14f1:8811
+	  PCI device.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cx88-alsa.
+
+config VIDEO_CX88_BLACKBIRD
+	tristate "Blackbird MPEG encoder support (cx2388x + cx23416)"
+	depends on VIDEO_CX88
+	select VIDEO_CX2341X
+	help
+	  This adds support for MPEG encoder cards based on the
+	  Blackbird reference design, using the Conexant 2388x
+	  and 23416 chips.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cx88-blackbird.
+
+config VIDEO_CX88_DVB
+	tristate "DVB/ATSC Support for cx2388x based TV cards"
+	depends on VIDEO_CX88 && DVB_CORE
+	select VIDEOBUF2_DVB
+	select DVB_PLL if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_OR51132 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_CX22702 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_LGDT330X if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_NXT200X if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_CX24123 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_ISL6421 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_S5H1411 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_CX24116 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV0299 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV0288 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STB6000 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STV0900 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_STB6100 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_DS3000 if MEDIA_SUBDRV_AUTOSELECT
+	select DVB_TS2020 if MEDIA_SUBDRV_AUTOSELECT
+	select MEDIA_TUNER_SIMPLE if MEDIA_SUBDRV_AUTOSELECT
+	help
+	  This adds support for DVB/ATSC cards based on the
+	  Conexant 2388x chip.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cx88-dvb.
+
+config VIDEO_CX88_ENABLE_VP3054
+	bool "VP-3054 Secondary I2C Bus Support"
+	default y
+	depends on VIDEO_CX88_DVB && DVB_MT352
+	help
+	  This adds DVB-T support for cards based on the
+	  Conexant 2388x chip and the MT352 demodulator,
+	  which also require support for the VP-3054
+	  Secondary I2C bus, such at DNTV Live! DVB-T Pro.
+
+config VIDEO_CX88_VP3054
+	tristate
+	depends on VIDEO_CX88_DVB && VIDEO_CX88_ENABLE_VP3054
+	default y
+
+config VIDEO_CX88_MPEG
+	tristate
+	depends on VIDEO_CX88_DVB || VIDEO_CX88_BLACKBIRD
+	default y
diff --git a/drivers/media/pci/cx88/Makefile b/drivers/media/pci/cx88/Makefile
new file mode 100644
index 000000000..c2a015869
--- /dev/null
+++ b/drivers/media/pci/cx88/Makefile
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0
+cx88xx-objs	:= cx88-cards.o cx88-core.o cx88-i2c.o cx88-tvaudio.o \
+		   cx88-dsp.o cx88-input.o
+cx8800-objs	:= cx88-video.o cx88-vbi.o
+cx8802-objs	:= cx88-mpeg.o
+
+obj-$(CONFIG_VIDEO_CX88) += cx88xx.o cx8800.o
+obj-$(CONFIG_VIDEO_CX88_MPEG) += cx8802.o
+obj-$(CONFIG_VIDEO_CX88_ALSA) += cx88-alsa.o
+obj-$(CONFIG_VIDEO_CX88_BLACKBIRD) += cx88-blackbird.o
+obj-$(CONFIG_VIDEO_CX88_DVB) += cx88-dvb.o
+obj-$(CONFIG_VIDEO_CX88_VP3054) += cx88-vp3054-i2c.o
+ccflags-y += -I $(srctree)/drivers/media/tuners
+ccflags-y += -I $(srctree)/drivers/media/dvb-frontends
diff --git a/drivers/media/pci/cx88/cx88-alsa.c b/drivers/media/pci/cx88/cx88-alsa.c
new file mode 100644
index 000000000..29fb1311e
--- /dev/null
+++ b/drivers/media/pci/cx88/cx88-alsa.c
@@ -0,0 +1,1007 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Support for audio capture
+ *  PCI function #1 of the cx2388x.
+ *
+ *    (c) 2007 Trent Piepho <xyzzy@speakeasy.org>
+ *    (c) 2005,2006 Ricardo Cerqueira <v4l@cerqueira.org>
+ *    (c) 2005 Mauro Carvalho Chehab <mchehab@kernel.org>
+ *    Based on a dummy cx88 module by Gerd Knorr <kraxel@bytesex.org>
+ *    Based on dummy.c by Jaroslav Kysela <perex@perex.cz>
+ */
+
+#include "cx88.h"
+#include "cx88-reg.h"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/vmalloc.h>
+#include <linux/dma-mapping.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/control.h>
+#include <sound/initval.h>
+#include <sound/tlv.h>
+#include <media/i2c/wm8775.h>
+
+#define dprintk(level, fmt, arg...) do {				\
+	if (debug + 1 > level)						\
+		printk(KERN_DEBUG pr_fmt("%s: alsa: " fmt),		\
+			chip->core->name, ##arg);			\
+} while (0)
+
+/*
+ * Data type declarations - Can be moded to a header file later
+ */
+
+struct cx88_audio_buffer {
+	unsigned int		bpl;
+	struct cx88_riscmem	risc;
+	void			*vaddr;
+	struct scatterlist	*sglist;
+	int                     sglen;
+	unsigned long		nr_pages;
+};
+
+struct cx88_audio_dev {
+	struct cx88_core           *core;
+	struct cx88_dmaqueue       q;
+
+	/* pci i/o */
+	struct pci_dev             *pci;
+
+	/* audio controls */
+	int                        irq;
+
+	struct snd_card            *card;
+
+	spinlock_t                 reg_lock;
+	atomic_t		   count;
+
+	unsigned int               dma_size;
+	unsigned int               period_size;
+	unsigned int               num_periods;
+
+	struct cx88_audio_buffer   *buf;
+
+	struct snd_pcm_substream   *substream;
+};
+
+/*
+ * Module global static vars
+ */
+
+static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;	/* Index 0-MAX */
+static const char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;	/* ID for this card */
+static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
+
+module_param_array(enable, bool, NULL, 0444);
+MODULE_PARM_DESC(enable, "Enable cx88x soundcard. default enabled.");
+
+module_param_array(index, int, NULL, 0444);
+MODULE_PARM_DESC(index, "Index value for cx88x capture interface(s).");
+
+/*
+ * Module macros
+ */
+
+MODULE_DESCRIPTION("ALSA driver module for cx2388x based TV cards");
+MODULE_AUTHOR("Ricardo Cerqueira");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@kernel.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION(CX88_VERSION);
+
+static unsigned int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "enable debug messages");
+
+/*
+ * Module specific functions
+ */
+
+/*
+ * BOARD Specific: Sets audio DMA
+ */
+
+static int _cx88_start_audio_dma(struct cx88_audio_dev *chip)
+{
+	struct cx88_audio_buffer *buf = chip->buf;
+	struct cx88_core *core = chip->core;
+	const struct sram_channel *audio_ch = &cx88_sram_channels[SRAM_CH25];
+
+	/* Make sure RISC/FIFO are off before changing FIFO/RISC settings */
+	cx_clear(MO_AUD_DMACNTRL, 0x11);
+
+	/* setup fifo + format - out channel */
+	cx88_sram_channel_setup(chip->core, audio_ch, buf->bpl, buf->risc.dma);
+
+	/* sets bpl size */
+	cx_write(MO_AUDD_LNGTH, buf->bpl);
+
+	/* reset counter */
+	cx_write(MO_AUDD_GPCNTRL, GP_COUNT_CONTROL_RESET);
+	atomic_set(&chip->count, 0);
+
+	dprintk(1,
+		"Start audio DMA, %d B/line, %d lines/FIFO, %d periods, %d byte buffer\n",
+		buf->bpl, cx_read(audio_ch->cmds_start + 8) >> 1,
+		chip->num_periods, buf->bpl * chip->num_periods);
+
+	/* Enables corresponding bits at AUD_INT_STAT */
+	cx_write(MO_AUD_INTMSK, AUD_INT_OPC_ERR | AUD_INT_DN_SYNC |
+				AUD_INT_DN_RISCI2 | AUD_INT_DN_RISCI1);
+
+	/* Clean any pending interrupt bits already set */
+	cx_write(MO_AUD_INTSTAT, ~0);
+
+	/* enable audio irqs */
+	cx_set(MO_PCI_INTMSK, chip->core->pci_irqmask | PCI_INT_AUDINT);
+
+	/* start dma */
+
+	/* Enables Risc Processor */
+	cx_set(MO_DEV_CNTRL2, (1 << 5));
+	/* audio downstream FIFO and RISC enable */
+	cx_set(MO_AUD_DMACNTRL, 0x11);
+
+	if (debug)
+		cx88_sram_channel_dump(chip->core, audio_ch);
+
+	return 0;
+}
+
+/*
+ * BOARD Specific: Resets audio DMA
+ */
+static int _cx88_stop_audio_dma(struct cx88_audio_dev *chip)
+{
+	struct cx88_core *core = chip->core;
+
+	dprintk(1, "Stopping audio DMA\n");
+
+	/* stop dma */
+	cx_clear(MO_AUD_DMACNTRL, 0x11);
+
+	/* disable irqs */
+	cx_clear(MO_PCI_INTMSK, PCI_INT_AUDINT);
+	cx_clear(MO_AUD_INTMSK, AUD_INT_OPC_ERR | AUD_INT_DN_SYNC |
+				AUD_INT_DN_RISCI2 | AUD_INT_DN_RISCI1);
+
+	if (debug)
+		cx88_sram_channel_dump(chip->core,
+				       &cx88_sram_channels[SRAM_CH25]);
+
+	return 0;
+}
+
+#define MAX_IRQ_LOOP 50
+
+/*
+ * BOARD Specific: IRQ dma bits
+ */
+static const char *cx88_aud_irqs[32] = {
+	"dn_risci1", "up_risci1", "rds_dn_risc1", /* 0-2 */
+	NULL,					  /* reserved */
+	"dn_risci2", "up_risci2", "rds_dn_risc2", /* 4-6 */
+	NULL,					  /* reserved */
+	"dnf_of", "upf_uf", "rds_dnf_uf",	  /* 8-10 */
+	NULL,					  /* reserved */
+	"dn_sync", "up_sync", "rds_dn_sync",	  /* 12-14 */
+	NULL,					  /* reserved */
+	"opc_err", "par_err", "rip_err",	  /* 16-18 */
+	"pci_abort", "ber_irq", "mchg_irq"	  /* 19-21 */
+};
+
+/*
+ * BOARD Specific: Threats IRQ audio specific calls
+ */
+static void cx8801_aud_irq(struct cx88_audio_dev *chip)
+{
+	struct cx88_core *core = chip->core;
+	u32 status, mask;
+
+	status = cx_read(MO_AUD_INTSTAT);
+	mask   = cx_read(MO_AUD_INTMSK);
+	if (0 == (status & mask))
+		return;
+	cx_write(MO_AUD_INTSTAT, status);
+	if (debug > 1  ||  (status & mask & ~0xff))
+		cx88_print_irqbits("irq aud",
+				   cx88_aud_irqs, ARRAY_SIZE(cx88_aud_irqs),
+				   status, mask);
+	/* risc op code error */
+	if (status & AUD_INT_OPC_ERR) {
+		pr_warn("Audio risc op code error\n");
+		cx_clear(MO_AUD_DMACNTRL, 0x11);
+		cx88_sram_channel_dump(core, &cx88_sram_channels[SRAM_CH25]);
+	}
+	if (status & AUD_INT_DN_SYNC) {
+		dprintk(1, "Downstream sync error\n");
+		cx_write(MO_AUDD_GPCNTRL, GP_COUNT_CONTROL_RESET);
+		return;
+	}
+	/* risc1 downstream */
+	if (status & AUD_INT_DN_RISCI1) {
+		atomic_set(&chip->count, cx_read(MO_AUDD_GPCNT));
+		snd_pcm_period_elapsed(chip->substream);
+	}
+	/* FIXME: Any other status should deserve a special handling? */
+}
+
+/*
+ * BOARD Specific: Handles IRQ calls
+ */
+static irqreturn_t cx8801_irq(int irq, void *dev_id)
+{
+	struct cx88_audio_dev *chip = dev_id;
+	struct cx88_core *core = chip->core;
+	u32 status;
+	int loop, handled = 0;
+
+	for (loop = 0; loop < MAX_IRQ_LOOP; loop++) {
+		status = cx_read(MO_PCI_INTSTAT) &
+			(core->pci_irqmask | PCI_INT_AUDINT);
+		if (status == 0)
+			goto out;
+		dprintk(3, "cx8801_irq loop %d/%d, status %x\n",
+			loop, MAX_IRQ_LOOP, status);
+		handled = 1;
+		cx_write(MO_PCI_INTSTAT, status);
+
+		if (status & core->pci_irqmask)
+			cx88_core_irq(core, status);
+		if (status & PCI_INT_AUDINT)
+			cx8801_aud_irq(chip);
+	}
+
+	if (loop == MAX_IRQ_LOOP) {
+		pr_err("IRQ loop detected, disabling interrupts\n");
+		cx_clear(MO_PCI_INTMSK, PCI_INT_AUDINT);
+	}
+
+ out:
+	return IRQ_RETVAL(handled);
+}
+
+static int cx88_alsa_dma_init(struct cx88_audio_dev *chip,
+			      unsigned long nr_pages)
+{
+	struct cx88_audio_buffer *buf = chip->buf;
+	struct page *pg;
+	int i;
+
+	buf->vaddr = vmalloc_32(nr_pages << PAGE_SHIFT);
+	if (!buf->vaddr) {
+		dprintk(1, "vmalloc_32(%lu pages) failed\n", nr_pages);
+		return -ENOMEM;
+	}
+
+	dprintk(1, "vmalloc is at addr %p, size=%lu\n",
+		buf->vaddr, nr_pages << PAGE_SHIFT);
+
+	memset(buf->vaddr, 0, nr_pages << PAGE_SHIFT);
+	buf->nr_pages = nr_pages;
+
+	buf->sglist = vzalloc(array_size(sizeof(*buf->sglist), buf->nr_pages));
+	if (!buf->sglist)
+		goto vzalloc_err;
+
+	sg_init_table(buf->sglist, buf->nr_pages);
+	for (i = 0; i < buf->nr_pages; i++) {
+		pg = vmalloc_to_page(buf->vaddr + i * PAGE_SIZE);
+		if (!pg)
+			goto vmalloc_to_page_err;
+		sg_set_page(&buf->sglist[i], pg, PAGE_SIZE, 0);
+	}
+	return 0;
+
+vmalloc_to_page_err:
+	vfree(buf->sglist);
+	buf->sglist = NULL;
+vzalloc_err:
+	vfree(buf->vaddr);
+	buf->vaddr = NULL;
+	return -ENOMEM;
+}
+
+static int cx88_alsa_dma_map(struct cx88_audio_dev *dev)
+{
+	struct cx88_audio_buffer *buf = dev->buf;
+
+	buf->sglen = dma_map_sg(&dev->pci->dev, buf->sglist,
+			buf->nr_pages, DMA_FROM_DEVICE);
+
+	if (buf->sglen == 0) {
+		pr_warn("%s: cx88_alsa_map_sg failed\n", __func__);
+		return -ENOMEM;
+	}
+	return 0;
+}
+
+static int cx88_alsa_dma_unmap(struct cx88_audio_dev *dev)
+{
+	struct cx88_audio_buffer *buf = dev->buf;
+
+	if (!buf->sglen)
+		return 0;
+
+	dma_unmap_sg(&dev->pci->dev, buf->sglist, buf->nr_pages,
+		     DMA_FROM_DEVICE);
+	buf->sglen = 0;
+	return 0;
+}
+
+static int cx88_alsa_dma_free(struct cx88_audio_buffer *buf)
+{
+	vfree(buf->sglist);
+	buf->sglist = NULL;
+	vfree(buf->vaddr);
+	buf->vaddr = NULL;
+	return 0;
+}
+
+static int dsp_buffer_free(struct cx88_audio_dev *chip)
+{
+	struct cx88_riscmem *risc = &chip->buf->risc;
+
+	WARN_ON(!chip->dma_size);
+
+	dprintk(2, "Freeing buffer\n");
+	cx88_alsa_dma_unmap(chip);
+	cx88_alsa_dma_free(chip->buf);
+	if (risc->cpu)
+		dma_free_coherent(&chip->pci->dev, risc->size, risc->cpu,
+				  risc->dma);
+	kfree(chip->buf);
+
+	chip->buf = NULL;
+
+	return 0;
+}
+
+/*
+ * ALSA PCM Interface
+ */
+
+/*
+ * Digital hardware definition
+ */
+#define DEFAULT_FIFO_SIZE	4096
+static const struct snd_pcm_hardware snd_cx88_digital_hw = {
+	.info = SNDRV_PCM_INFO_MMAP |
+		SNDRV_PCM_INFO_INTERLEAVED |
+		SNDRV_PCM_INFO_BLOCK_TRANSFER |
+		SNDRV_PCM_INFO_MMAP_VALID,
+	.formats = SNDRV_PCM_FMTBIT_S16_LE,
+
+	.rates =		SNDRV_PCM_RATE_48000,
+	.rate_min =		48000,
+	.rate_max =		48000,
+	.channels_min = 2,
+	.channels_max = 2,
+	/*
+	 * Analog audio output will be full of clicks and pops if there
+	 * are not exactly four lines in the SRAM FIFO buffer.
+	 */
+	.period_bytes_min = DEFAULT_FIFO_SIZE / 4,
+	.period_bytes_max = DEFAULT_FIFO_SIZE / 4,
+	.periods_min = 1,
+	.periods_max = 1024,
+	.buffer_bytes_max = (1024 * 1024),
+};
+
+/*
+ * audio pcm capture open callback
+ */
+static int snd_cx88_pcm_open(struct snd_pcm_substream *substream)
+{
+	struct cx88_audio_dev *chip = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	int err;
+
+	if (!chip) {
+		pr_err("BUG: cx88 can't find device struct. Can't proceed with open\n");
+		return -ENODEV;
+	}
+
+	err = snd_pcm_hw_constraint_pow2(runtime, 0,
+					 SNDRV_PCM_HW_PARAM_PERIODS);
+	if (err < 0)
+		goto _error;
+
+	chip->substream = substream;
+
+	runtime->hw = snd_cx88_digital_hw;
+
+	if (cx88_sram_channels[SRAM_CH25].fifo_size != DEFAULT_FIFO_SIZE) {
+		unsigned int bpl = cx88_sram_channels[SRAM_CH25].fifo_size / 4;
+
+		bpl &= ~7; /* must be multiple of 8 */
+		runtime->hw.period_bytes_min = bpl;
+		runtime->hw.period_bytes_max = bpl;
+	}
+
+	return 0;
+_error:
+	dprintk(1, "Error opening PCM!\n");
+	return err;
+}
+
+/*
+ * audio close callback
+ */
+static int snd_cx88_close(struct snd_pcm_substream *substream)
+{
+	return 0;
+}
+
+/*
+ * hw_params callback
+ */
+static int snd_cx88_hw_params(struct snd_pcm_substream *substream,
+			      struct snd_pcm_hw_params *hw_params)
+{
+	struct cx88_audio_dev *chip = snd_pcm_substream_chip(substream);
+
+	struct cx88_audio_buffer *buf;
+	int ret;
+
+	if (substream->runtime->dma_area) {
+		dsp_buffer_free(chip);
+		substream->runtime->dma_area = NULL;
+	}
+
+	chip->period_size = params_period_bytes(hw_params);
+	chip->num_periods = params_periods(hw_params);
+	chip->dma_size = chip->period_size * params_periods(hw_params);
+
+	WARN_ON(!chip->dma_size);
+	WARN_ON(chip->num_periods & (chip->num_periods - 1));
+
+	buf = kzalloc(sizeof(*buf), GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	chip->buf = buf;
+	buf->bpl = chip->period_size;
+
+	ret = cx88_alsa_dma_init(chip,
+				 (PAGE_ALIGN(chip->dma_size) >> PAGE_SHIFT));
+	if (ret < 0)
+		goto error;
+
+	ret = cx88_alsa_dma_map(chip);
+	if (ret < 0)
+		goto error;
+
+	ret = cx88_risc_databuffer(chip->pci, &buf->risc, buf->sglist,
+				   chip->period_size, chip->num_periods, 1);
+	if (ret < 0)
+		goto error;
+
+	/* Loop back to start of program */
+	buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | RISC_CNT_INC);
+	buf->risc.jmp[1] = cpu_to_le32(buf->risc.dma);
+
+	substream->runtime->dma_area = chip->buf->vaddr;
+	substream->runtime->dma_bytes = chip->dma_size;
+	substream->runtime->dma_addr = 0;
+	return 0;
+
+error:
+	kfree(buf);
+	return ret;
+}
+
+/*
+ * hw free callback
+ */
+static int snd_cx88_hw_free(struct snd_pcm_substream *substream)
+{
+	struct cx88_audio_dev *chip = snd_pcm_substream_chip(substream);
+
+	if (substream->runtime->dma_area) {
+		dsp_buffer_free(chip);
+		substream->runtime->dma_area = NULL;
+	}
+
+	return 0;
+}
+
+/*
+ * prepare callback
+ */
+static int snd_cx88_prepare(struct snd_pcm_substream *substream)
+{
+	return 0;
+}
+
+/*
+ * trigger callback
+ */
+static int snd_cx88_card_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+	struct cx88_audio_dev *chip = snd_pcm_substream_chip(substream);
+	int err;
+
+	/* Local interrupts are already disabled by ALSA */
+	spin_lock(&chip->reg_lock);
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+		err = _cx88_start_audio_dma(chip);
+		break;
+	case SNDRV_PCM_TRIGGER_STOP:
+		err = _cx88_stop_audio_dma(chip);
+		break;
+	default:
+		err =  -EINVAL;
+		break;
+	}
+
+	spin_unlock(&chip->reg_lock);
+
+	return err;
+}
+
+/*
+ * pointer callback
+ */
+static snd_pcm_uframes_t snd_cx88_pointer(struct snd_pcm_substream *substream)
+{
+	struct cx88_audio_dev *chip = snd_pcm_substream_chip(substream);
+	struct snd_pcm_runtime *runtime = substream->runtime;
+	u16 count;
+
+	count = atomic_read(&chip->count);
+
+//	dprintk(2, "%s - count %d (+%u), period %d, frame %lu\n", __func__,
+//		count, new, count & (runtime->periods-1),
+//		runtime->period_size * (count & (runtime->periods-1)));
+	return runtime->period_size * (count & (runtime->periods - 1));
+}
+
+/*
+ * page callback (needed for mmap)
+ */
+static struct page *snd_cx88_page(struct snd_pcm_substream *substream,
+				  unsigned long offset)
+{
+	void *pageptr = substream->runtime->dma_area + offset;
+
+	return vmalloc_to_page(pageptr);
+}
+
+/*
+ * operators
+ */
+static const struct snd_pcm_ops snd_cx88_pcm_ops = {
+	.open = snd_cx88_pcm_open,
+	.close = snd_cx88_close,
+	.hw_params = snd_cx88_hw_params,
+	.hw_free = snd_cx88_hw_free,
+	.prepare = snd_cx88_prepare,
+	.trigger = snd_cx88_card_trigger,
+	.pointer = snd_cx88_pointer,
+	.page = snd_cx88_page,
+};
+
+/*
+ * create a PCM device
+ */
+static int snd_cx88_pcm(struct cx88_audio_dev *chip, int device,
+			const char *name)
+{
+	int err;
+	struct snd_pcm *pcm;
+
+	err = snd_pcm_new(chip->card, name, device, 0, 1, &pcm);
+	if (err < 0)
+		return err;
+	pcm->private_data = chip;
+	strscpy(pcm->name, name, sizeof(pcm->name));
+	snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_cx88_pcm_ops);
+
+	return 0;
+}
+
+/*
+ * CONTROL INTERFACE
+ */
+static int snd_cx88_volume_info(struct snd_kcontrol *kcontrol,
+				struct snd_ctl_elem_info *info)
+{
+	info->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+	info->count = 2;
+	info->value.integer.min = 0;
+	info->value.integer.max = 0x3f;
+
+	return 0;
+}
+
+static int snd_cx88_volume_get(struct snd_kcontrol *kcontrol,
+			       struct snd_ctl_elem_value *value)
+{
+	struct cx88_audio_dev *chip = snd_kcontrol_chip(kcontrol);
+	struct cx88_core *core = chip->core;
+	int vol = 0x3f - (cx_read(AUD_VOL_CTL) & 0x3f),
+	    bal = cx_read(AUD_BAL_CTL);
+
+	value->value.integer.value[(bal & 0x40) ? 0 : 1] = vol;
+	vol -= (bal & 0x3f);
+	value->value.integer.value[(bal & 0x40) ? 1 : 0] = vol < 0 ? 0 : vol;
+
+	return 0;
+}
+
+static void snd_cx88_wm8775_volume_put(struct snd_kcontrol *kcontrol,
+				       struct snd_ctl_elem_value *value)
+{
+	struct cx88_audio_dev *chip = snd_kcontrol_chip(kcontrol);
+	struct cx88_core *core = chip->core;
+	u16 left = value->value.integer.value[0];
+	u16 right = value->value.integer.value[1];
+	int v, b;
+
+	/* Pass volume & balance onto any WM8775 */
+	if (left >= right) {
+		v = left << 10;
+		b = left ? (0x8000 * right) / left : 0x8000;
+	} else {
+		v = right << 10;
+		b = right ? 0xffff - (0x8000 * left) / right : 0x8000;
+	}
+	wm8775_s_ctrl(core, V4L2_CID_AUDIO_VOLUME, v);
+	wm8775_s_ctrl(core, V4L2_CID_AUDIO_BALANCE, b);
+}
+
+/* OK - TODO: test it */
+static int snd_cx88_volume_put(struct snd_kcontrol *kcontrol,
+			       struct snd_ctl_elem_value *value)
+{
+	struct cx88_audio_dev *chip = snd_kcontrol_chip(kcontrol);
+	struct cx88_core *core = chip->core;
+	int left, right, v, b;
+	int changed = 0;
+	u32 old;
+
+	if (core->sd_wm8775)
+		snd_cx88_wm8775_volume_put(kcontrol, value);
+
+	left = value->value.integer.value[0] & 0x3f;
+	right = value->value.integer.value[1] & 0x3f;
+	b = right - left;
+	if (b < 0) {
+		v = 0x3f - left;
+		b = (-b) | 0x40;
+	} else {
+		v = 0x3f - right;
+	}
+	/* Do we really know this will always be called with IRQs on? */
+	spin_lock_irq(&chip->reg_lock);
+	old = cx_read(AUD_VOL_CTL);
+	if (v != (old & 0x3f)) {
+		cx_swrite(SHADOW_AUD_VOL_CTL, AUD_VOL_CTL, (old & ~0x3f) | v);
+		changed = 1;
+	}
+	if ((cx_read(AUD_BAL_CTL) & 0x7f) != b) {
+		cx_write(AUD_BAL_CTL, b);
+		changed = 1;
+	}
+	spin_unlock_irq(&chip->reg_lock);
+
+	return changed;
+}
+
+static const DECLARE_TLV_DB_SCALE(snd_cx88_db_scale, -6300, 100, 0);
+
+static const struct snd_kcontrol_new snd_cx88_volume = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
+		  SNDRV_CTL_ELEM_ACCESS_TLV_READ,
+	.name = "Analog-TV Volume",
+	.info = snd_cx88_volume_info,
+	.get = snd_cx88_volume_get,
+	.put = snd_cx88_volume_put,
+	.tlv.p = snd_cx88_db_scale,
+};
+
+static int snd_cx88_switch_get(struct snd_kcontrol *kcontrol,
+			       struct snd_ctl_elem_value *value)
+{
+	struct cx88_audio_dev *chip = snd_kcontrol_chip(kcontrol);
+	struct cx88_core *core = chip->core;
+	u32 bit = kcontrol->private_value;
+
+	value->value.integer.value[0] = !(cx_read(AUD_VOL_CTL) & bit);
+	return 0;
+}
+
+static int snd_cx88_switch_put(struct snd_kcontrol *kcontrol,
+			       struct snd_ctl_elem_value *value)
+{
+	struct cx88_audio_dev *chip = snd_kcontrol_chip(kcontrol);
+	struct cx88_core *core = chip->core;
+	u32 bit = kcontrol->private_value;
+	int ret = 0;
+	u32 vol;
+
+	spin_lock_irq(&chip->reg_lock);
+	vol = cx_read(AUD_VOL_CTL);
+	if (value->value.integer.value[0] != !(vol & bit)) {
+		vol ^= bit;
+		cx_swrite(SHADOW_AUD_VOL_CTL, AUD_VOL_CTL, vol);
+		/* Pass mute onto any WM8775 */
+		if (core->sd_wm8775 && ((1 << 6) == bit))
+			wm8775_s_ctrl(core,
+				      V4L2_CID_AUDIO_MUTE, 0 != (vol & bit));
+		ret = 1;
+	}
+	spin_unlock_irq(&chip->reg_lock);
+	return ret;
+}
+
+static const struct snd_kcontrol_new snd_cx88_dac_switch = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "Audio-Out Switch",
+	.info = snd_ctl_boolean_mono_info,
+	.get = snd_cx88_switch_get,
+	.put = snd_cx88_switch_put,
+	.private_value = (1 << 8),
+};
+
+static const struct snd_kcontrol_new snd_cx88_source_switch = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "Analog-TV Switch",
+	.info = snd_ctl_boolean_mono_info,
+	.get = snd_cx88_switch_get,
+	.put = snd_cx88_switch_put,
+	.private_value = (1 << 6),
+};
+
+static int snd_cx88_alc_get(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_value *value)
+{
+	struct cx88_audio_dev *chip = snd_kcontrol_chip(kcontrol);
+	struct cx88_core *core = chip->core;
+	s32 val;
+
+	val = wm8775_g_ctrl(core, V4L2_CID_AUDIO_LOUDNESS);
+	value->value.integer.value[0] = val ? 1 : 0;
+	return 0;
+}
+
+static int snd_cx88_alc_put(struct snd_kcontrol *kcontrol,
+			    struct snd_ctl_elem_value *value)
+{
+	struct cx88_audio_dev *chip = snd_kcontrol_chip(kcontrol);
+	struct cx88_core *core = chip->core;
+
+	wm8775_s_ctrl(core, V4L2_CID_AUDIO_LOUDNESS,
+		      value->value.integer.value[0] != 0);
+	return 0;
+}
+
+static const struct snd_kcontrol_new snd_cx88_alc_switch = {
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.name = "Line-In ALC Switch",
+	.info = snd_ctl_boolean_mono_info,
+	.get = snd_cx88_alc_get,
+	.put = snd_cx88_alc_put,
+};
+
+/*
+ * Basic Flow for Sound Devices
+ */
+
+/*
+ * PCI ID Table - 14f1:8801 and 14f1:8811 means function 1: Audio
+ * Only boards with eeprom and byte 1 at eeprom=1 have it
+ */
+
+static const struct pci_device_id cx88_audio_pci_tbl[] = {
+	{0x14f1, 0x8801, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{0x14f1, 0x8811, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{0, }
+};
+MODULE_DEVICE_TABLE(pci, cx88_audio_pci_tbl);
+
+/*
+ * Chip-specific destructor
+ */
+
+static int snd_cx88_free(struct cx88_audio_dev *chip)
+{
+	if (chip->irq >= 0)
+		free_irq(chip->irq, chip);
+
+	cx88_core_put(chip->core, chip->pci);
+
+	pci_disable_device(chip->pci);
+	return 0;
+}
+
+/*
+ * Component Destructor
+ */
+static void snd_cx88_dev_free(struct snd_card *card)
+{
+	struct cx88_audio_dev *chip = card->private_data;
+
+	snd_cx88_free(chip);
+}
+
+/*
+ * Alsa Constructor - Component probe
+ */
+
+static int devno;
+static int snd_cx88_create(struct snd_card *card, struct pci_dev *pci,
+			   struct cx88_audio_dev **rchip,
+			   struct cx88_core **core_ptr)
+{
+	struct cx88_audio_dev	*chip;
+	struct cx88_core	*core;
+	int			err;
+	unsigned char		pci_lat;
+
+	*rchip = NULL;
+
+	err = pci_enable_device(pci);
+	if (err < 0)
+		return err;
+
+	pci_set_master(pci);
+
+	chip = card->private_data;
+
+	core = cx88_core_get(pci);
+	if (!core) {
+		err = -EINVAL;
+		return err;
+	}
+
+	err = dma_set_mask(&pci->dev, DMA_BIT_MASK(32));
+	if (err) {
+		dprintk(0, "%s/1: Oops: no 32bit PCI DMA ???\n", core->name);
+		cx88_core_put(core, pci);
+		return err;
+	}
+
+	/* pci init */
+	chip->card = card;
+	chip->pci = pci;
+	chip->irq = -1;
+	spin_lock_init(&chip->reg_lock);
+
+	chip->core = core;
+
+	/* get irq */
+	err = request_irq(chip->pci->irq, cx8801_irq,
+			  IRQF_SHARED, chip->core->name, chip);
+	if (err < 0) {
+		dprintk(0, "%s: can't get IRQ %d\n",
+			chip->core->name, chip->pci->irq);
+		return err;
+	}
+
+	/* print pci info */
+	pci_read_config_byte(pci, PCI_LATENCY_TIMER, &pci_lat);
+
+	dprintk(1,
+		"ALSA %s/%i: found at %s, rev: %d, irq: %d, latency: %d, mmio: 0x%llx\n",
+		core->name, devno,
+		pci_name(pci), pci->revision, pci->irq,
+		pci_lat, (unsigned long long)pci_resource_start(pci, 0));
+
+	chip->irq = pci->irq;
+	synchronize_irq(chip->irq);
+
+	*rchip = chip;
+	*core_ptr = core;
+
+	return 0;
+}
+
+static int cx88_audio_initdev(struct pci_dev *pci,
+			      const struct pci_device_id *pci_id)
+{
+	struct snd_card		*card;
+	struct cx88_audio_dev	*chip;
+	struct cx88_core	*core = NULL;
+	int			err;
+
+	if (devno >= SNDRV_CARDS)
+		return (-ENODEV);
+
+	if (!enable[devno]) {
+		++devno;
+		return (-ENOENT);
+	}
+
+	err = snd_card_new(&pci->dev, index[devno], id[devno], THIS_MODULE,
+			   sizeof(struct cx88_audio_dev), &card);
+	if (err < 0)
+		return err;
+
+	card->private_free = snd_cx88_dev_free;
+
+	err = snd_cx88_create(card, pci, &chip, &core);
+	if (err < 0)
+		goto error;
+
+	err = snd_cx88_pcm(chip, 0, "CX88 Digital");
+	if (err < 0)
+		goto error;
+
+	err = snd_ctl_add(card, snd_ctl_new1(&snd_cx88_volume, chip));
+	if (err < 0)
+		goto error;
+	err = snd_ctl_add(card, snd_ctl_new1(&snd_cx88_dac_switch, chip));
+	if (err < 0)
+		goto error;
+	err = snd_ctl_add(card, snd_ctl_new1(&snd_cx88_source_switch, chip));
+	if (err < 0)
+		goto error;
+
+	/* If there's a wm8775 then add a Line-In ALC switch */
+	if (core->sd_wm8775) {
+		err = snd_ctl_add(card, snd_ctl_new1(&snd_cx88_alc_switch, chip));
+		if (err < 0)
+			goto error;
+	}
+
+	strscpy(card->driver, "CX88x", sizeof(card->driver));
+	sprintf(card->shortname, "Conexant CX%x", pci->device);
+	sprintf(card->longname, "%s at %#llx",
+		card->shortname,
+		(unsigned long long)pci_resource_start(pci, 0));
+	strscpy(card->mixername, "CX88", sizeof(card->mixername));
+
+	dprintk(0, "%s/%i: ALSA support for cx2388x boards\n",
+		card->driver, devno);
+
+	err = snd_card_register(card);
+	if (err < 0)
+		goto error;
+	pci_set_drvdata(pci, card);
+
+	devno++;
+	return 0;
+
+error:
+	snd_card_free(card);
+	return err;
+}
+
+/*
+ * ALSA destructor
+ */
+static void cx88_audio_finidev(struct pci_dev *pci)
+{
+	struct snd_card *card = pci_get_drvdata(pci);
+
+	snd_card_free(card);
+
+	devno--;
+}
+
+/*
+ * PCI driver definition
+ */
+
+static struct pci_driver cx88_audio_pci_driver = {
+	.name     = "cx88_audio",
+	.id_table = cx88_audio_pci_tbl,
+	.probe    = cx88_audio_initdev,
+	.remove   = cx88_audio_finidev,
+};
+
+module_pci_driver(cx88_audio_pci_driver);
diff --git a/drivers/media/pci/cx88/cx88-blackbird.c b/drivers/media/pci/cx88/cx88-blackbird.c
new file mode 100644
index 000000000..c1b41a928
--- /dev/null
+++ b/drivers/media/pci/cx88/cx88-blackbird.c
@@ -0,0 +1,1253 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Support for a cx23416 mpeg encoder via cx2388x host port.
+ *  "blackbird" reference design.
+ *
+ *    (c) 2004 Jelle Foks <jelle@foks.us>
+ *    (c) 2004 Gerd Knorr <kraxel@bytesex.org>
+ *
+ *    (c) 2005-2006 Mauro Carvalho Chehab <mchehab@kernel.org>
+ *        - video_ioctl2 conversion
+ *
+ *  Includes parts from the ivtv driver <http://sourceforge.net/projects/ivtv/>
+ */
+
+#include "cx88.h"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/fs.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/firmware.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-event.h>
+#include <media/drv-intf/cx2341x.h>
+
+MODULE_DESCRIPTION("driver for cx2388x/cx23416 based mpeg encoder cards");
+MODULE_AUTHOR("Jelle Foks <jelle@foks.us>, Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION(CX88_VERSION);
+
+static unsigned int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "enable debug messages [blackbird]");
+
+#define dprintk(level, fmt, arg...) do {				\
+	if (debug + 1 > level)						\
+		printk(KERN_DEBUG pr_fmt("%s: blackbird:" fmt),		\
+			__func__, ##arg);				\
+} while (0)
+
+/* ------------------------------------------------------------------ */
+
+#define BLACKBIRD_FIRM_IMAGE_SIZE 376836
+
+/* defines below are from ivtv-driver.h */
+
+#define IVTV_CMD_HW_BLOCKS_RST 0xFFFFFFFF
+
+/* Firmware API commands */
+#define IVTV_API_STD_TIMEOUT 500
+
+enum blackbird_capture_type {
+	BLACKBIRD_MPEG_CAPTURE,
+	BLACKBIRD_RAW_CAPTURE,
+	BLACKBIRD_RAW_PASSTHRU_CAPTURE
+};
+
+enum blackbird_capture_bits {
+	BLACKBIRD_RAW_BITS_NONE             = 0x00,
+	BLACKBIRD_RAW_BITS_YUV_CAPTURE      = 0x01,
+	BLACKBIRD_RAW_BITS_PCM_CAPTURE      = 0x02,
+	BLACKBIRD_RAW_BITS_VBI_CAPTURE      = 0x04,
+	BLACKBIRD_RAW_BITS_PASSTHRU_CAPTURE = 0x08,
+	BLACKBIRD_RAW_BITS_TO_HOST_CAPTURE  = 0x10
+};
+
+enum blackbird_capture_end {
+	BLACKBIRD_END_AT_GOP, /* stop at the end of gop, generate irq */
+	BLACKBIRD_END_NOW, /* stop immediately, no irq */
+};
+
+enum blackbird_framerate {
+	BLACKBIRD_FRAMERATE_NTSC_30, /* NTSC: 30fps */
+	BLACKBIRD_FRAMERATE_PAL_25   /* PAL: 25fps */
+};
+
+enum blackbird_stream_port {
+	BLACKBIRD_OUTPUT_PORT_MEMORY,
+	BLACKBIRD_OUTPUT_PORT_STREAMING,
+	BLACKBIRD_OUTPUT_PORT_SERIAL
+};
+
+enum blackbird_data_xfer_status {
+	BLACKBIRD_MORE_BUFFERS_FOLLOW,
+	BLACKBIRD_LAST_BUFFER,
+};
+
+enum blackbird_picture_mask {
+	BLACKBIRD_PICTURE_MASK_NONE,
+	BLACKBIRD_PICTURE_MASK_I_FRAMES,
+	BLACKBIRD_PICTURE_MASK_I_P_FRAMES = 0x3,
+	BLACKBIRD_PICTURE_MASK_ALL_FRAMES = 0x7,
+};
+
+enum blackbird_vbi_mode_bits {
+	BLACKBIRD_VBI_BITS_SLICED,
+	BLACKBIRD_VBI_BITS_RAW,
+};
+
+enum blackbird_vbi_insertion_bits {
+	BLACKBIRD_VBI_BITS_INSERT_IN_XTENSION_USR_DATA,
+	BLACKBIRD_VBI_BITS_INSERT_IN_PRIVATE_PACKETS = 0x1 << 1,
+	BLACKBIRD_VBI_BITS_SEPARATE_STREAM = 0x2 << 1,
+	BLACKBIRD_VBI_BITS_SEPARATE_STREAM_USR_DATA = 0x4 << 1,
+	BLACKBIRD_VBI_BITS_SEPARATE_STREAM_PRV_DATA = 0x5 << 1,
+};
+
+enum blackbird_dma_unit {
+	BLACKBIRD_DMA_BYTES,
+	BLACKBIRD_DMA_FRAMES,
+};
+
+enum blackbird_dma_transfer_status_bits {
+	BLACKBIRD_DMA_TRANSFER_BITS_DONE = 0x01,
+	BLACKBIRD_DMA_TRANSFER_BITS_ERROR = 0x04,
+	BLACKBIRD_DMA_TRANSFER_BITS_LL_ERROR = 0x10,
+};
+
+enum blackbird_pause {
+	BLACKBIRD_PAUSE_ENCODING,
+	BLACKBIRD_RESUME_ENCODING,
+};
+
+enum blackbird_copyright {
+	BLACKBIRD_COPYRIGHT_OFF,
+	BLACKBIRD_COPYRIGHT_ON,
+};
+
+enum blackbird_notification_type {
+	BLACKBIRD_NOTIFICATION_REFRESH,
+};
+
+enum blackbird_notification_status {
+	BLACKBIRD_NOTIFICATION_OFF,
+	BLACKBIRD_NOTIFICATION_ON,
+};
+
+enum blackbird_notification_mailbox {
+	BLACKBIRD_NOTIFICATION_NO_MAILBOX = -1,
+};
+
+enum blackbird_field1_lines {
+	BLACKBIRD_FIELD1_SAA7114 = 0x00EF, /* 239 */
+	BLACKBIRD_FIELD1_SAA7115 = 0x00F0, /* 240 */
+	BLACKBIRD_FIELD1_MICRONAS = 0x0105, /* 261 */
+};
+
+enum blackbird_field2_lines {
+	BLACKBIRD_FIELD2_SAA7114 = 0x00EF, /* 239 */
+	BLACKBIRD_FIELD2_SAA7115 = 0x00F0, /* 240 */
+	BLACKBIRD_FIELD2_MICRONAS = 0x0106, /* 262 */
+};
+
+enum blackbird_custom_data_type {
+	BLACKBIRD_CUSTOM_EXTENSION_USR_DATA,
+	BLACKBIRD_CUSTOM_PRIVATE_PACKET,
+};
+
+enum blackbird_mute {
+	BLACKBIRD_UNMUTE,
+	BLACKBIRD_MUTE,
+};
+
+enum blackbird_mute_video_mask {
+	BLACKBIRD_MUTE_VIDEO_V_MASK = 0x0000FF00,
+	BLACKBIRD_MUTE_VIDEO_U_MASK = 0x00FF0000,
+	BLACKBIRD_MUTE_VIDEO_Y_MASK = 0xFF000000,
+};
+
+enum blackbird_mute_video_shift {
+	BLACKBIRD_MUTE_VIDEO_V_SHIFT = 8,
+	BLACKBIRD_MUTE_VIDEO_U_SHIFT = 16,
+	BLACKBIRD_MUTE_VIDEO_Y_SHIFT = 24,
+};
+
+/* Registers */
+#define IVTV_REG_ENC_SDRAM_REFRESH (0x07F8 /*| IVTV_REG_OFFSET*/)
+#define IVTV_REG_ENC_SDRAM_PRECHARGE (0x07FC /*| IVTV_REG_OFFSET*/)
+#define IVTV_REG_SPU (0x9050 /*| IVTV_REG_OFFSET*/)
+#define IVTV_REG_HW_BLOCKS (0x9054 /*| IVTV_REG_OFFSET*/)
+#define IVTV_REG_VPU (0x9058 /*| IVTV_REG_OFFSET*/)
+#define IVTV_REG_APU (0xA064 /*| IVTV_REG_OFFSET*/)
+
+/* ------------------------------------------------------------------ */
+
+static void host_setup(struct cx88_core *core)
+{
+	/* toggle reset of the host */
+	cx_write(MO_GPHST_SOFT_RST, 1);
+	udelay(100);
+	cx_write(MO_GPHST_SOFT_RST, 0);
+	udelay(100);
+
+	/* host port setup */
+	cx_write(MO_GPHST_WSC, 0x44444444U);
+	cx_write(MO_GPHST_XFR, 0);
+	cx_write(MO_GPHST_WDTH, 15);
+	cx_write(MO_GPHST_HDSHK, 0);
+	cx_write(MO_GPHST_MUX16, 0x44448888U);
+	cx_write(MO_GPHST_MODE, 0);
+}
+
+/* ------------------------------------------------------------------ */
+
+#define P1_MDATA0 0x390000
+#define P1_MDATA1 0x390001
+#define P1_MDATA2 0x390002
+#define P1_MDATA3 0x390003
+#define P1_MADDR2 0x390004
+#define P1_MADDR1 0x390005
+#define P1_MADDR0 0x390006
+#define P1_RDATA0 0x390008
+#define P1_RDATA1 0x390009
+#define P1_RDATA2 0x39000A
+#define P1_RDATA3 0x39000B
+#define P1_RADDR0 0x39000C
+#define P1_RADDR1 0x39000D
+#define P1_RRDWR  0x39000E
+
+static int wait_ready_gpio0_bit1(struct cx88_core *core, u32 state)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(1);
+	u32 gpio0, need;
+
+	need = state ? 2 : 0;
+	for (;;) {
+		gpio0 = cx_read(MO_GP0_IO) & 2;
+		if (need == gpio0)
+			return 0;
+		if (time_after(jiffies, timeout))
+			return -1;
+		udelay(1);
+	}
+}
+
+static int memory_write(struct cx88_core *core, u32 address, u32 value)
+{
+	/* Warning: address is dword address (4 bytes) */
+	cx_writeb(P1_MDATA0, (unsigned int)value);
+	cx_writeb(P1_MDATA1, (unsigned int)(value >> 8));
+	cx_writeb(P1_MDATA2, (unsigned int)(value >> 16));
+	cx_writeb(P1_MDATA3, (unsigned int)(value >> 24));
+	cx_writeb(P1_MADDR2, (unsigned int)(address >> 16) | 0x40);
+	cx_writeb(P1_MADDR1, (unsigned int)(address >> 8));
+	cx_writeb(P1_MADDR0, (unsigned int)address);
+	cx_read(P1_MDATA0);
+	cx_read(P1_MADDR0);
+
+	return wait_ready_gpio0_bit1(core, 1);
+}
+
+static int memory_read(struct cx88_core *core, u32 address, u32 *value)
+{
+	int retval;
+	u32 val;
+
+	/* Warning: address is dword address (4 bytes) */
+	cx_writeb(P1_MADDR2, (unsigned int)(address >> 16) & ~0xC0);
+	cx_writeb(P1_MADDR1, (unsigned int)(address >> 8));
+	cx_writeb(P1_MADDR0, (unsigned int)address);
+	cx_read(P1_MADDR0);
+
+	retval = wait_ready_gpio0_bit1(core, 1);
+
+	cx_writeb(P1_MDATA3, 0);
+	val     = (unsigned char)cx_read(P1_MDATA3) << 24;
+	cx_writeb(P1_MDATA2, 0);
+	val    |= (unsigned char)cx_read(P1_MDATA2) << 16;
+	cx_writeb(P1_MDATA1, 0);
+	val    |= (unsigned char)cx_read(P1_MDATA1) << 8;
+	cx_writeb(P1_MDATA0, 0);
+	val    |= (unsigned char)cx_read(P1_MDATA0);
+
+	*value  = val;
+	return retval;
+}
+
+static int register_write(struct cx88_core *core, u32 address, u32 value)
+{
+	cx_writeb(P1_RDATA0, (unsigned int)value);
+	cx_writeb(P1_RDATA1, (unsigned int)(value >> 8));
+	cx_writeb(P1_RDATA2, (unsigned int)(value >> 16));
+	cx_writeb(P1_RDATA3, (unsigned int)(value >> 24));
+	cx_writeb(P1_RADDR0, (unsigned int)address);
+	cx_writeb(P1_RADDR1, (unsigned int)(address >> 8));
+	cx_writeb(P1_RRDWR, 1);
+	cx_read(P1_RDATA0);
+	cx_read(P1_RADDR0);
+
+	return wait_ready_gpio0_bit1(core, 1);
+}
+
+static int register_read(struct cx88_core *core, u32 address, u32 *value)
+{
+	int retval;
+	u32 val;
+
+	cx_writeb(P1_RADDR0, (unsigned int)address);
+	cx_writeb(P1_RADDR1, (unsigned int)(address >> 8));
+	cx_writeb(P1_RRDWR, 0);
+	cx_read(P1_RADDR0);
+
+	retval  = wait_ready_gpio0_bit1(core, 1);
+	val     = (unsigned char)cx_read(P1_RDATA0);
+	val    |= (unsigned char)cx_read(P1_RDATA1) << 8;
+	val    |= (unsigned char)cx_read(P1_RDATA2) << 16;
+	val    |= (unsigned char)cx_read(P1_RDATA3) << 24;
+
+	*value  = val;
+	return retval;
+}
+
+/* ------------------------------------------------------------------ */
+
+static int blackbird_mbox_func(void *priv, u32 command, int in,
+			       int out, u32 data[CX2341X_MBOX_MAX_DATA])
+{
+	struct cx8802_dev *dev = priv;
+	unsigned long timeout;
+	u32 value, flag, retval;
+	int i;
+
+	dprintk(1, "%s: 0x%X\n", __func__, command);
+
+	/*
+	 * this may not be 100% safe if we can't read any memory location
+	 * without side effects
+	 */
+	memory_read(dev->core, dev->mailbox - 4, &value);
+	if (value != 0x12345678) {
+		dprintk(0,
+			"Firmware and/or mailbox pointer not initialized or corrupted\n");
+		return -EIO;
+	}
+
+	memory_read(dev->core, dev->mailbox, &flag);
+	if (flag) {
+		dprintk(0, "ERROR: Mailbox appears to be in use (%x)\n", flag);
+		return -EIO;
+	}
+
+	flag |= 1; /* tell 'em we're working on it */
+	memory_write(dev->core, dev->mailbox, flag);
+
+	/* write command + args + fill remaining with zeros */
+	memory_write(dev->core, dev->mailbox + 1, command); /* command code */
+	/* timeout */
+	memory_write(dev->core, dev->mailbox + 3, IVTV_API_STD_TIMEOUT);
+	for (i = 0; i < in; i++) {
+		memory_write(dev->core, dev->mailbox + 4 + i, data[i]);
+		dprintk(1, "API Input %d = %d\n", i, data[i]);
+	}
+	for (; i < CX2341X_MBOX_MAX_DATA; i++)
+		memory_write(dev->core, dev->mailbox + 4 + i, 0);
+
+	flag |= 3; /* tell 'em we're done writing */
+	memory_write(dev->core, dev->mailbox, flag);
+
+	/* wait for firmware to handle the API command */
+	timeout = jiffies + msecs_to_jiffies(1000);
+	for (;;) {
+		memory_read(dev->core, dev->mailbox, &flag);
+		if (0 != (flag & 4))
+			break;
+		if (time_after(jiffies, timeout)) {
+			dprintk(0, "ERROR: API Mailbox timeout %x\n", command);
+			return -EIO;
+		}
+		udelay(10);
+	}
+
+	/* read output values */
+	for (i = 0; i < out; i++) {
+		memory_read(dev->core, dev->mailbox + 4 + i, data + i);
+		dprintk(1, "API Output %d = %d\n", i, data[i]);
+	}
+
+	memory_read(dev->core, dev->mailbox + 2, &retval);
+	dprintk(1, "API result = %d\n", retval);
+
+	flag = 0;
+	memory_write(dev->core, dev->mailbox, flag);
+	return retval;
+}
+
+/* ------------------------------------------------------------------ */
+
+/*
+ * We don't need to call the API often, so using just one mailbox
+ * will probably suffice
+ */
+static int blackbird_api_cmd(struct cx8802_dev *dev, u32 command,
+			     u32 inputcnt, u32 outputcnt, ...)
+{
+	u32 data[CX2341X_MBOX_MAX_DATA];
+	va_list vargs;
+	int i, err;
+
+	va_start(vargs, outputcnt);
+
+	for (i = 0; i < inputcnt; i++)
+		data[i] = va_arg(vargs, int);
+
+	err = blackbird_mbox_func(dev, command, inputcnt, outputcnt, data);
+	for (i = 0; i < outputcnt; i++) {
+		int *vptr = va_arg(vargs, int *);
+		*vptr = data[i];
+	}
+	va_end(vargs);
+	return err;
+}
+
+static int blackbird_find_mailbox(struct cx8802_dev *dev)
+{
+	u32 signature[4] = {0x12345678, 0x34567812, 0x56781234, 0x78123456};
+	int signaturecnt = 0;
+	u32 value;
+	int i;
+
+	for (i = 0; i < BLACKBIRD_FIRM_IMAGE_SIZE; i++) {
+		memory_read(dev->core, i, &value);
+		if (value == signature[signaturecnt])
+			signaturecnt++;
+		else
+			signaturecnt = 0;
+		if (signaturecnt == 4) {
+			dprintk(1, "Mailbox signature found\n");
+			return i + 1;
+		}
+	}
+	dprintk(0, "Mailbox signature values not found!\n");
+	return -EIO;
+}
+
+static int blackbird_load_firmware(struct cx8802_dev *dev)
+{
+	static const unsigned char magic[8] = {
+		0xa7, 0x0d, 0x00, 0x00, 0x66, 0xbb, 0x55, 0xaa
+	};
+	const struct firmware *firmware;
+	int i, retval = 0;
+	u32 value = 0;
+	u32 checksum = 0;
+	__le32 *dataptr;
+
+	retval  = register_write(dev->core, IVTV_REG_VPU, 0xFFFFFFED);
+	retval |= register_write(dev->core, IVTV_REG_HW_BLOCKS,
+				 IVTV_CMD_HW_BLOCKS_RST);
+	retval |= register_write(dev->core, IVTV_REG_ENC_SDRAM_REFRESH,
+				 0x80000640);
+	retval |= register_write(dev->core, IVTV_REG_ENC_SDRAM_PRECHARGE,
+				 0x1A);
+	usleep_range(10000, 20000);
+	retval |= register_write(dev->core, IVTV_REG_APU, 0);
+
+	if (retval < 0)
+		dprintk(0, "Error with register_write\n");
+
+	retval = request_firmware(&firmware, CX2341X_FIRM_ENC_FILENAME,
+				  &dev->pci->dev);
+
+	if (retval != 0) {
+		pr_err("Hotplug firmware request failed (%s).\n",
+		       CX2341X_FIRM_ENC_FILENAME);
+		pr_err("Please fix your hotplug setup, the board will not work without firmware loaded!\n");
+		return -EIO;
+	}
+
+	if (firmware->size != BLACKBIRD_FIRM_IMAGE_SIZE) {
+		pr_err("Firmware size mismatch (have %zd, expected %d)\n",
+		       firmware->size, BLACKBIRD_FIRM_IMAGE_SIZE);
+		release_firmware(firmware);
+		return -EINVAL;
+	}
+
+	if (memcmp(firmware->data, magic, 8) != 0) {
+		pr_err("Firmware magic mismatch, wrong file?\n");
+		release_firmware(firmware);
+		return -EINVAL;
+	}
+
+	/* transfer to the chip */
+	dprintk(1, "Loading firmware ...\n");
+	dataptr = (__le32 *)firmware->data;
+	for (i = 0; i < (firmware->size >> 2); i++) {
+		value = le32_to_cpu(*dataptr);
+		checksum += ~value;
+		memory_write(dev->core, i, value);
+		dataptr++;
+	}
+
+	/* read back to verify with the checksum */
+	for (i--; i >= 0; i--) {
+		memory_read(dev->core, i, &value);
+		checksum -= ~value;
+	}
+	release_firmware(firmware);
+	if (checksum) {
+		pr_err("Firmware load might have failed (checksum mismatch).\n");
+		return -EIO;
+	}
+	dprintk(0, "Firmware upload successful.\n");
+
+	retval |= register_write(dev->core, IVTV_REG_HW_BLOCKS,
+				 IVTV_CMD_HW_BLOCKS_RST);
+	retval |= register_read(dev->core, IVTV_REG_SPU, &value);
+	retval |= register_write(dev->core, IVTV_REG_SPU, value & 0xFFFFFFFE);
+	usleep_range(10000, 20000);
+
+	retval |= register_read(dev->core, IVTV_REG_VPU, &value);
+	retval |= register_write(dev->core, IVTV_REG_VPU, value & 0xFFFFFFE8);
+
+	if (retval < 0)
+		dprintk(0, "Error with register_write\n");
+	return 0;
+}
+
+/*
+ * Settings used by the windows tv app for PVR2000:
+ * =================================================================================================================
+ * Profile | Codec | Resolution | CBR/VBR | Video Qlty   | V. Bitrate | Frmrate | Audio Codec | A. Bitrate | A. Mode
+ * -----------------------------------------------------------------------------------------------------------------
+ * MPEG-1  | MPEG1 | 352x288PAL | (CBR)   | 1000:Optimal | 2000 Kbps  | 25fps   | MPG1 Layer2 | 224kbps    | Stereo
+ * MPEG-2  | MPEG2 | 720x576PAL | VBR     | 600 :Good    | 4000 Kbps  | 25fps   | MPG1 Layer2 | 224kbps    | Stereo
+ * VCD     | MPEG1 | 352x288PAL | (CBR)   | 1000:Optimal | 1150 Kbps  | 25fps   | MPG1 Layer2 | 224kbps    | Stereo
+ * DVD     | MPEG2 | 720x576PAL | VBR     | 600 :Good    | 6000 Kbps  | 25fps   | MPG1 Layer2 | 224kbps    | Stereo
+ * DB* DVD | MPEG2 | 720x576PAL | CBR     | 600 :Good    | 6000 Kbps  | 25fps   | MPG1 Layer2 | 224kbps    | Stereo
+ * =================================================================================================================
+ * [*] DB: "DirectBurn"
+ */
+
+static void blackbird_codec_settings(struct cx8802_dev *dev)
+{
+	struct cx88_core *core = dev->core;
+
+	/* assign frame size */
+	blackbird_api_cmd(dev, CX2341X_ENC_SET_FRAME_SIZE, 2, 0,
+			  core->height, core->width);
+
+	dev->cxhdl.width = core->width;
+	dev->cxhdl.height = core->height;
+	cx2341x_handler_set_50hz(&dev->cxhdl,
+				 dev->core->tvnorm & V4L2_STD_625_50);
+	cx2341x_handler_setup(&dev->cxhdl);
+}
+
+static int blackbird_initialize_codec(struct cx8802_dev *dev)
+{
+	struct cx88_core *core = dev->core;
+	int version;
+	int retval;
+
+	dprintk(1, "Initialize codec\n");
+	retval = blackbird_api_cmd(dev, CX2341X_ENC_PING_FW, 0, 0); /* ping */
+	if (retval < 0) {
+		/* ping was not successful, reset and upload firmware */
+		cx_write(MO_SRST_IO, 0); /* SYS_RSTO=0 */
+		cx_write(MO_SRST_IO, 1); /* SYS_RSTO=1 */
+		retval = blackbird_load_firmware(dev);
+		if (retval < 0)
+			return retval;
+
+		retval = blackbird_find_mailbox(dev);
+		if (retval < 0)
+			return -1;
+
+		dev->mailbox = retval;
+
+		/* ping */
+		retval = blackbird_api_cmd(dev, CX2341X_ENC_PING_FW, 0, 0);
+		if (retval < 0) {
+			dprintk(0, "ERROR: Firmware ping failed!\n");
+			return -1;
+		}
+
+		retval = blackbird_api_cmd(dev, CX2341X_ENC_GET_VERSION,
+					   0, 1, &version);
+		if (retval < 0) {
+			dprintk(0,
+				"ERROR: Firmware get encoder version failed!\n");
+			return -1;
+		}
+		dprintk(0, "Firmware version is 0x%08x\n", version);
+	}
+
+	cx_write(MO_PINMUX_IO, 0x88); /* 656-8bit IO and enable MPEG parallel IO */
+	cx_clear(MO_INPUT_FORMAT, 0x100); /* chroma subcarrier lock to normal? */
+	cx_write(MO_VBOS_CONTROL, 0x84A00); /* no 656 mode, 8-bit pixels, disable VBI */
+	cx_clear(MO_OUTPUT_FORMAT, 0x0008); /* Normal Y-limits to let the mpeg encoder sync */
+
+	blackbird_codec_settings(dev);
+
+	blackbird_api_cmd(dev, CX2341X_ENC_SET_NUM_VSYNC_LINES, 2, 0,
+			  BLACKBIRD_FIELD1_SAA7115, BLACKBIRD_FIELD2_SAA7115);
+
+	blackbird_api_cmd(dev, CX2341X_ENC_SET_PLACEHOLDER, 12, 0,
+			  BLACKBIRD_CUSTOM_EXTENSION_USR_DATA,
+			  0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
+
+	return 0;
+}
+
+static int blackbird_start_codec(struct cx8802_dev *dev)
+{
+	struct cx88_core *core = dev->core;
+	/* start capturing to the host interface */
+	u32 reg;
+
+	int i;
+	int lastchange = -1;
+	int lastval = 0;
+
+	for (i = 0; (i < 10) && (i < (lastchange + 4)); i++) {
+		reg = cx_read(AUD_STATUS);
+
+		dprintk(1, "AUD_STATUS:%dL: 0x%x\n", i, reg);
+		if ((reg & 0x0F) != lastval) {
+			lastval = reg & 0x0F;
+			lastchange = i;
+		}
+		msleep(100);
+	}
+
+	/* unmute audio source */
+	cx_clear(AUD_VOL_CTL, (1 << 6));
+
+	blackbird_api_cmd(dev, CX2341X_ENC_REFRESH_INPUT, 0, 0);
+
+	/* initialize the video input */
+	blackbird_api_cmd(dev, CX2341X_ENC_INITIALIZE_INPUT, 0, 0);
+
+	cx2341x_handler_set_busy(&dev->cxhdl, 1);
+
+	/* start capturing to the host interface */
+	blackbird_api_cmd(dev, CX2341X_ENC_START_CAPTURE, 2, 0,
+			  BLACKBIRD_MPEG_CAPTURE, BLACKBIRD_RAW_BITS_NONE);
+
+	return 0;
+}
+
+static int blackbird_stop_codec(struct cx8802_dev *dev)
+{
+	blackbird_api_cmd(dev, CX2341X_ENC_STOP_CAPTURE, 3, 0,
+			  BLACKBIRD_END_NOW,
+			  BLACKBIRD_MPEG_CAPTURE,
+			  BLACKBIRD_RAW_BITS_NONE);
+
+	cx2341x_handler_set_busy(&dev->cxhdl, 0);
+
+	return 0;
+}
+
+/* ------------------------------------------------------------------ */
+
+static int queue_setup(struct vb2_queue *q,
+		       unsigned int *num_buffers, unsigned int *num_planes,
+		       unsigned int sizes[], struct device *alloc_devs[])
+{
+	struct cx8802_dev *dev = q->drv_priv;
+
+	*num_planes = 1;
+	dev->ts_packet_size  = 188 * 4;
+	dev->ts_packet_count  = 32;
+	sizes[0] = dev->ts_packet_size * dev->ts_packet_count;
+	return 0;
+}
+
+static int buffer_prepare(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct cx8802_dev *dev = vb->vb2_queue->drv_priv;
+	struct cx88_buffer *buf = container_of(vbuf, struct cx88_buffer, vb);
+
+	return cx8802_buf_prepare(vb->vb2_queue, dev, buf);
+}
+
+static void buffer_finish(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct cx8802_dev *dev = vb->vb2_queue->drv_priv;
+	struct cx88_buffer *buf = container_of(vbuf, struct cx88_buffer, vb);
+	struct cx88_riscmem *risc = &buf->risc;
+
+	if (risc->cpu)
+		dma_free_coherent(&dev->pci->dev, risc->size, risc->cpu,
+				  risc->dma);
+	memset(risc, 0, sizeof(*risc));
+}
+
+static void buffer_queue(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct cx8802_dev *dev = vb->vb2_queue->drv_priv;
+	struct cx88_buffer    *buf = container_of(vbuf, struct cx88_buffer, vb);
+
+	cx8802_buf_queue(dev, buf);
+}
+
+static int start_streaming(struct vb2_queue *q, unsigned int count)
+{
+	struct cx8802_dev *dev = q->drv_priv;
+	struct cx88_dmaqueue *dmaq = &dev->mpegq;
+	struct cx8802_driver *drv;
+	struct cx88_buffer *buf;
+	unsigned long flags;
+	int err;
+
+	/* Make sure we can acquire the hardware */
+	drv = cx8802_get_driver(dev, CX88_MPEG_BLACKBIRD);
+	if (!drv) {
+		dprintk(1, "%s: blackbird driver is not loaded\n", __func__);
+		err = -ENODEV;
+		goto fail;
+	}
+
+	err = drv->request_acquire(drv);
+	if (err != 0) {
+		dprintk(1, "%s: Unable to acquire hardware, %d\n", __func__,
+			err);
+		goto fail;
+	}
+
+	if (blackbird_initialize_codec(dev) < 0) {
+		drv->request_release(drv);
+		err = -EINVAL;
+		goto fail;
+	}
+
+	err = blackbird_start_codec(dev);
+	if (err == 0) {
+		buf = list_entry(dmaq->active.next, struct cx88_buffer, list);
+		cx8802_start_dma(dev, dmaq, buf);
+		return 0;
+	}
+
+fail:
+	spin_lock_irqsave(&dev->slock, flags);
+	while (!list_empty(&dmaq->active)) {
+		struct cx88_buffer *buf = list_entry(dmaq->active.next,
+			struct cx88_buffer, list);
+
+		list_del(&buf->list);
+		vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_QUEUED);
+	}
+	spin_unlock_irqrestore(&dev->slock, flags);
+	return err;
+}
+
+static void stop_streaming(struct vb2_queue *q)
+{
+	struct cx8802_dev *dev = q->drv_priv;
+	struct cx88_dmaqueue *dmaq = &dev->mpegq;
+	struct cx8802_driver *drv = NULL;
+	unsigned long flags;
+
+	cx8802_cancel_buffers(dev);
+	blackbird_stop_codec(dev);
+
+	/* Make sure we release the hardware */
+	drv = cx8802_get_driver(dev, CX88_MPEG_BLACKBIRD);
+	WARN_ON(!drv);
+	if (drv)
+		drv->request_release(drv);
+
+	spin_lock_irqsave(&dev->slock, flags);
+	while (!list_empty(&dmaq->active)) {
+		struct cx88_buffer *buf = list_entry(dmaq->active.next,
+			struct cx88_buffer, list);
+
+		list_del(&buf->list);
+		vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+	}
+	spin_unlock_irqrestore(&dev->slock, flags);
+}
+
+static const struct vb2_ops blackbird_qops = {
+	.queue_setup    = queue_setup,
+	.buf_prepare  = buffer_prepare,
+	.buf_finish = buffer_finish,
+	.buf_queue    = buffer_queue,
+	.wait_prepare = vb2_ops_wait_prepare,
+	.wait_finish = vb2_ops_wait_finish,
+	.start_streaming = start_streaming,
+	.stop_streaming = stop_streaming,
+};
+
+/* ------------------------------------------------------------------ */
+
+static int vidioc_querycap(struct file *file, void  *priv,
+			   struct v4l2_capability *cap)
+{
+	struct cx8802_dev *dev = video_drvdata(file);
+	struct cx88_core *core = dev->core;
+
+	strscpy(cap->driver, "cx88_blackbird", sizeof(cap->driver));
+	return cx88_querycap(file, core, cap);
+}
+
+static int vidioc_enum_fmt_vid_cap(struct file *file, void  *priv,
+				   struct v4l2_fmtdesc *f)
+{
+	if (f->index != 0)
+		return -EINVAL;
+
+	f->pixelformat = V4L2_PIX_FMT_MPEG;
+	return 0;
+}
+
+static int vidioc_g_fmt_vid_cap(struct file *file, void *priv,
+				struct v4l2_format *f)
+{
+	struct cx8802_dev *dev = video_drvdata(file);
+	struct cx88_core *core = dev->core;
+
+	f->fmt.pix.pixelformat  = V4L2_PIX_FMT_MPEG;
+	f->fmt.pix.bytesperline = 0;
+	f->fmt.pix.sizeimage    = dev->ts_packet_size * dev->ts_packet_count;
+	f->fmt.pix.colorspace   = V4L2_COLORSPACE_SMPTE170M;
+	f->fmt.pix.width        = core->width;
+	f->fmt.pix.height       = core->height;
+	f->fmt.pix.field        = core->field;
+	return 0;
+}
+
+static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
+				  struct v4l2_format *f)
+{
+	struct cx8802_dev *dev = video_drvdata(file);
+	struct cx88_core *core = dev->core;
+	unsigned int maxw, maxh;
+	enum v4l2_field field;
+
+	f->fmt.pix.pixelformat  = V4L2_PIX_FMT_MPEG;
+	f->fmt.pix.bytesperline = 0;
+	f->fmt.pix.sizeimage    = dev->ts_packet_size * dev->ts_packet_count;
+	f->fmt.pix.colorspace   = V4L2_COLORSPACE_SMPTE170M;
+
+	maxw = norm_maxw(core->tvnorm);
+	maxh = norm_maxh(core->tvnorm);
+
+	field = f->fmt.pix.field;
+
+	switch (field) {
+	case V4L2_FIELD_TOP:
+	case V4L2_FIELD_BOTTOM:
+	case V4L2_FIELD_INTERLACED:
+	case V4L2_FIELD_SEQ_BT:
+	case V4L2_FIELD_SEQ_TB:
+		break;
+	default:
+		field = (f->fmt.pix.height > maxh / 2)
+			? V4L2_FIELD_INTERLACED
+			: V4L2_FIELD_BOTTOM;
+		break;
+	}
+	if (V4L2_FIELD_HAS_T_OR_B(field))
+		maxh /= 2;
+
+	v4l_bound_align_image(&f->fmt.pix.width, 48, maxw, 2,
+			      &f->fmt.pix.height, 32, maxh, 0, 0);
+	f->fmt.pix.field = field;
+	return 0;
+}
+
+static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
+				struct v4l2_format *f)
+{
+	struct cx8802_dev *dev = video_drvdata(file);
+	struct cx88_core  *core = dev->core;
+
+	if (vb2_is_busy(&dev->vb2_mpegq))
+		return -EBUSY;
+	if (core->v4ldev && (vb2_is_busy(&core->v4ldev->vb2_vidq) ||
+			     vb2_is_busy(&core->v4ldev->vb2_vbiq)))
+		return -EBUSY;
+	vidioc_try_fmt_vid_cap(file, priv, f);
+	core->width = f->fmt.pix.width;
+	core->height = f->fmt.pix.height;
+	core->field = f->fmt.pix.field;
+	cx88_set_scale(core, f->fmt.pix.width, f->fmt.pix.height,
+		       f->fmt.pix.field);
+	blackbird_api_cmd(dev, CX2341X_ENC_SET_FRAME_SIZE, 2, 0,
+			  f->fmt.pix.height, f->fmt.pix.width);
+	return 0;
+}
+
+static int vidioc_s_frequency(struct file *file, void *priv,
+			      const struct v4l2_frequency *f)
+{
+	struct cx8802_dev *dev = video_drvdata(file);
+	struct cx88_core *core = dev->core;
+	bool streaming;
+
+	if (unlikely(core->board.tuner_type == UNSET))
+		return -EINVAL;
+	if (unlikely(f->tuner != 0))
+		return -EINVAL;
+	streaming = vb2_start_streaming_called(&dev->vb2_mpegq);
+	if (streaming)
+		blackbird_stop_codec(dev);
+
+	cx88_set_freq(core, f);
+	blackbird_initialize_codec(dev);
+	cx88_set_scale(core, core->width, core->height, core->field);
+	if (streaming)
+		blackbird_start_codec(dev);
+	return 0;
+}
+
+static int vidioc_log_status(struct file *file, void *priv)
+{
+	struct cx8802_dev *dev = video_drvdata(file);
+	struct cx88_core *core = dev->core;
+	char name[32 + 2];
+
+	snprintf(name, sizeof(name), "%s/2", core->name);
+	call_all(core, core, log_status);
+	v4l2_ctrl_handler_log_status(&dev->cxhdl.hdl, name);
+	return 0;
+}
+
+static int vidioc_enum_input(struct file *file, void *priv,
+			     struct v4l2_input *i)
+{
+	struct cx8802_dev *dev = video_drvdata(file);
+	struct cx88_core *core = dev->core;
+
+	return cx88_enum_input(core, i);
+}
+
+static int vidioc_g_frequency(struct file *file, void *priv,
+			      struct v4l2_frequency *f)
+{
+	struct cx8802_dev *dev = video_drvdata(file);
+	struct cx88_core *core = dev->core;
+
+	if (unlikely(core->board.tuner_type == UNSET))
+		return -EINVAL;
+	if (unlikely(f->tuner != 0))
+		return -EINVAL;
+
+	f->frequency = core->freq;
+	call_all(core, tuner, g_frequency, f);
+
+	return 0;
+}
+
+static int vidioc_g_input(struct file *file, void *priv, unsigned int *i)
+{
+	struct cx8802_dev *dev = video_drvdata(file);
+	struct cx88_core *core = dev->core;
+
+	*i = core->input;
+	return 0;
+}
+
+static int vidioc_s_input(struct file *file, void *priv, unsigned int i)
+{
+	struct cx8802_dev *dev = video_drvdata(file);
+	struct cx88_core *core = dev->core;
+
+	if (i >= 4)
+		return -EINVAL;
+	if (!INPUT(i).type)
+		return -EINVAL;
+
+	cx88_newstation(core);
+	cx88_video_mux(core, i);
+	return 0;
+}
+
+static int vidioc_g_tuner(struct file *file, void *priv,
+			  struct v4l2_tuner *t)
+{
+	struct cx8802_dev *dev = video_drvdata(file);
+	struct cx88_core *core = dev->core;
+	u32 reg;
+
+	if (unlikely(core->board.tuner_type == UNSET))
+		return -EINVAL;
+	if (t->index != 0)
+		return -EINVAL;
+
+	strscpy(t->name, "Television", sizeof(t->name));
+	t->capability = V4L2_TUNER_CAP_NORM;
+	t->rangehigh  = 0xffffffffUL;
+	call_all(core, tuner, g_tuner, t);
+
+	cx88_get_stereo(core, t);
+	reg = cx_read(MO_DEVICE_STATUS);
+	t->signal = (reg & (1 << 5)) ? 0xffff : 0x0000;
+	return 0;
+}
+
+static int vidioc_s_tuner(struct file *file, void *priv,
+			  const struct v4l2_tuner *t)
+{
+	struct cx8802_dev *dev = video_drvdata(file);
+	struct cx88_core *core = dev->core;
+
+	if (core->board.tuner_type == UNSET)
+		return -EINVAL;
+	if (t->index != 0)
+		return -EINVAL;
+
+	cx88_set_stereo(core, t->audmode, 1);
+	return 0;
+}
+
+static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *tvnorm)
+{
+	struct cx8802_dev *dev = video_drvdata(file);
+	struct cx88_core *core = dev->core;
+
+	*tvnorm = core->tvnorm;
+	return 0;
+}
+
+static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id id)
+{
+	struct cx8802_dev *dev = video_drvdata(file);
+	struct cx88_core *core = dev->core;
+
+	return cx88_set_tvnorm(core, id);
+}
+
+static const struct v4l2_file_operations mpeg_fops = {
+	.owner	       = THIS_MODULE,
+	.open	       = v4l2_fh_open,
+	.release       = vb2_fop_release,
+	.read	       = vb2_fop_read,
+	.poll          = vb2_fop_poll,
+	.mmap	       = vb2_fop_mmap,
+	.unlocked_ioctl = video_ioctl2,
+};
+
+static const struct v4l2_ioctl_ops mpeg_ioctl_ops = {
+	.vidioc_querycap      = vidioc_querycap,
+	.vidioc_enum_fmt_vid_cap  = vidioc_enum_fmt_vid_cap,
+	.vidioc_g_fmt_vid_cap     = vidioc_g_fmt_vid_cap,
+	.vidioc_try_fmt_vid_cap   = vidioc_try_fmt_vid_cap,
+	.vidioc_s_fmt_vid_cap     = vidioc_s_fmt_vid_cap,
+	.vidioc_reqbufs       = vb2_ioctl_reqbufs,
+	.vidioc_querybuf      = vb2_ioctl_querybuf,
+	.vidioc_qbuf          = vb2_ioctl_qbuf,
+	.vidioc_dqbuf         = vb2_ioctl_dqbuf,
+	.vidioc_streamon      = vb2_ioctl_streamon,
+	.vidioc_streamoff     = vb2_ioctl_streamoff,
+	.vidioc_s_frequency   = vidioc_s_frequency,
+	.vidioc_log_status    = vidioc_log_status,
+	.vidioc_enum_input    = vidioc_enum_input,
+	.vidioc_g_frequency   = vidioc_g_frequency,
+	.vidioc_g_input       = vidioc_g_input,
+	.vidioc_s_input       = vidioc_s_input,
+	.vidioc_g_tuner       = vidioc_g_tuner,
+	.vidioc_s_tuner       = vidioc_s_tuner,
+	.vidioc_g_std         = vidioc_g_std,
+	.vidioc_s_std         = vidioc_s_std,
+	.vidioc_subscribe_event      = v4l2_ctrl_subscribe_event,
+	.vidioc_unsubscribe_event    = v4l2_event_unsubscribe,
+};
+
+static const struct video_device cx8802_mpeg_template = {
+	.name                 = "cx8802",
+	.fops                 = &mpeg_fops,
+	.ioctl_ops	      = &mpeg_ioctl_ops,
+	.tvnorms              = CX88_NORMS,
+};
+
+/* ------------------------------------------------------------------ */
+
+/* The CX8802 MPEG API will call this when we can use the hardware */
+static int cx8802_blackbird_advise_acquire(struct cx8802_driver *drv)
+{
+	struct cx88_core *core = drv->core;
+	int err = 0;
+
+	switch (core->boardnr) {
+	case CX88_BOARD_HAUPPAUGE_HVR1300:
+		/*
+		 * By default, core setup will leave the cx22702 out of reset,
+		 * on the bus.
+		 * We left the hardware on power up with the cx22702 active.
+		 * We're being given access to re-arrange the GPIOs.
+		 * Take the bus off the cx22702 and put the cx23416 on it.
+		 */
+		/* Toggle reset on cx22702 leaving i2c active */
+		cx_set(MO_GP0_IO, 0x00000080);
+		udelay(1000);
+		cx_clear(MO_GP0_IO, 0x00000080);
+		udelay(50);
+		cx_set(MO_GP0_IO, 0x00000080);
+		udelay(1000);
+		/* tri-state the cx22702 pins */
+		cx_set(MO_GP0_IO, 0x00000004);
+		udelay(1000);
+		break;
+	default:
+		err = -ENODEV;
+	}
+	return err;
+}
+
+/* The CX8802 MPEG API will call this when we need to release the hardware */
+static int cx8802_blackbird_advise_release(struct cx8802_driver *drv)
+{
+	struct cx88_core *core = drv->core;
+	int err = 0;
+
+	switch (core->boardnr) {
+	case CX88_BOARD_HAUPPAUGE_HVR1300:
+		/* Exit leaving the cx23416 on the bus */
+		break;
+	default:
+		err = -ENODEV;
+	}
+	return err;
+}
+
+static void blackbird_unregister_video(struct cx8802_dev *dev)
+{
+	video_unregister_device(&dev->mpeg_dev);
+}
+
+static int blackbird_register_video(struct cx8802_dev *dev)
+{
+	int err;
+
+	cx88_vdev_init(dev->core, dev->pci, &dev->mpeg_dev,
+		       &cx8802_mpeg_template, "mpeg");
+	dev->mpeg_dev.ctrl_handler = &dev->cxhdl.hdl;
+	video_set_drvdata(&dev->mpeg_dev, dev);
+	dev->mpeg_dev.queue = &dev->vb2_mpegq;
+	dev->mpeg_dev.device_caps = V4L2_CAP_READWRITE | V4L2_CAP_STREAMING |
+				    V4L2_CAP_VIDEO_CAPTURE;
+	if (dev->core->board.tuner_type != UNSET)
+		dev->mpeg_dev.device_caps |= V4L2_CAP_TUNER;
+	err = video_register_device(&dev->mpeg_dev, VFL_TYPE_VIDEO, -1);
+	if (err < 0) {
+		pr_info("can't register mpeg device\n");
+		return err;
+	}
+	pr_info("registered device %s [mpeg]\n",
+		video_device_node_name(&dev->mpeg_dev));
+	return 0;
+}
+
+/* ----------------------------------------------------------- */
+
+static int cx8802_blackbird_probe(struct cx8802_driver *drv)
+{
+	struct cx88_core *core = drv->core;
+	struct cx8802_dev *dev = core->dvbdev;
+	struct vb2_queue *q;
+	int err;
+
+	dprintk(1, "%s\n", __func__);
+	dprintk(1, " ->being probed by Card=%d Name=%s, PCI %02x:%02x\n",
+		core->boardnr,
+		core->name,
+		core->pci_bus,
+		core->pci_slot);
+
+	err = -ENODEV;
+	if (!(core->board.mpeg & CX88_MPEG_BLACKBIRD))
+		goto fail_core;
+
+	dev->cxhdl.port = CX2341X_PORT_STREAMING;
+	dev->cxhdl.width = core->width;
+	dev->cxhdl.height = core->height;
+	dev->cxhdl.func = blackbird_mbox_func;
+	dev->cxhdl.priv = dev;
+	err = cx2341x_handler_init(&dev->cxhdl, 36);
+	if (err)
+		goto fail_core;
+	v4l2_ctrl_add_handler(&dev->cxhdl.hdl, &core->video_hdl, NULL, false);
+
+	/* blackbird stuff */
+	pr_info("cx23416 based mpeg encoder (blackbird reference design)\n");
+	host_setup(dev->core);
+
+	blackbird_initialize_codec(dev);
+
+	/* initial device configuration: needed ? */
+//	init_controls(core);
+	cx88_set_tvnorm(core, core->tvnorm);
+	cx88_video_mux(core, 0);
+	cx2341x_handler_set_50hz(&dev->cxhdl, core->height == 576);
+	cx2341x_handler_setup(&dev->cxhdl);
+
+	q = &dev->vb2_mpegq;
+	q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	q->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF | VB2_READ;
+	q->gfp_flags = GFP_DMA32;
+	q->min_buffers_needed = 2;
+	q->drv_priv = dev;
+	q->buf_struct_size = sizeof(struct cx88_buffer);
+	q->ops = &blackbird_qops;
+	q->mem_ops = &vb2_dma_sg_memops;
+	q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+	q->lock = &core->lock;
+	q->dev = &dev->pci->dev;
+
+	err = vb2_queue_init(q);
+	if (err < 0)
+		goto fail_core;
+
+	blackbird_register_video(dev);
+
+	return 0;
+
+fail_core:
+	return err;
+}
+
+static int cx8802_blackbird_remove(struct cx8802_driver *drv)
+{
+	struct cx88_core *core = drv->core;
+	struct cx8802_dev *dev = core->dvbdev;
+
+	/* blackbird */
+	blackbird_unregister_video(drv->core->dvbdev);
+	v4l2_ctrl_handler_free(&dev->cxhdl.hdl);
+
+	return 0;
+}
+
+static struct cx8802_driver cx8802_blackbird_driver = {
+	.type_id	= CX88_MPEG_BLACKBIRD,
+	.hw_access	= CX8802_DRVCTL_SHARED,
+	.probe		= cx8802_blackbird_probe,
+	.remove		= cx8802_blackbird_remove,
+	.advise_acquire	= cx8802_blackbird_advise_acquire,
+	.advise_release	= cx8802_blackbird_advise_release,
+};
+
+static int __init blackbird_init(void)
+{
+	pr_info("cx2388x blackbird driver version %s loaded\n",
+		CX88_VERSION);
+	return cx8802_register_driver(&cx8802_blackbird_driver);
+}
+
+static void __exit blackbird_fini(void)
+{
+	cx8802_unregister_driver(&cx8802_blackbird_driver);
+}
+
+module_init(blackbird_init);
+module_exit(blackbird_fini);
diff --git a/drivers/media/pci/cx88/cx88-cards.c b/drivers/media/pci/cx88/cx88-cards.c
new file mode 100644
index 000000000..f01e48c23
--- /dev/null
+++ b/drivers/media/pci/cx88/cx88-cards.c
@@ -0,0 +1,3856 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * device driver for Conexant 2388x based TV cards
+ * card-specific stuff.
+ *
+ * (c) 2003 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
+ */
+
+#include "cx88.h"
+#include "tea5767.h"
+#include "xc4000.h"
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+
+static unsigned int tuner[] = {[0 ... (CX88_MAXBOARDS - 1)] = UNSET };
+static unsigned int radio[] = {[0 ... (CX88_MAXBOARDS - 1)] = UNSET };
+static unsigned int card[]  = {[0 ... (CX88_MAXBOARDS - 1)] = UNSET };
+
+module_param_array(tuner, int, NULL, 0444);
+module_param_array(radio, int, NULL, 0444);
+module_param_array(card,  int, NULL, 0444);
+
+MODULE_PARM_DESC(tuner, "tuner type");
+MODULE_PARM_DESC(radio, "radio tuner type");
+MODULE_PARM_DESC(card, "card type");
+
+static unsigned int latency = UNSET;
+module_param(latency, int, 0444);
+MODULE_PARM_DESC(latency, "pci latency timer");
+
+static int disable_ir;
+module_param(disable_ir, int, 0444);
+MODULE_PARM_DESC(disable_ir, "Disable IR support");
+
+#define dprintk(level, fmt, arg...)	do {				\
+	if (cx88_core_debug >= level)					\
+		printk(KERN_DEBUG pr_fmt("%s: core:" fmt),		\
+			__func__, ##arg);				\
+} while (0)
+
+/* ------------------------------------------------------------------ */
+/* board config info                                                  */
+
+/* If radio_type !=UNSET, radio_addr should be specified
+ */
+
+static const struct cx88_board cx88_boards[] = {
+	[CX88_BOARD_UNKNOWN] = {
+		.name		= "UNKNOWN/GENERIC",
+		.tuner_type     = UNSET,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 0,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE2,
+			.vmux   = 1,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE3,
+			.vmux   = 2,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE4,
+			.vmux   = 3,
+		} },
+	},
+	[CX88_BOARD_HAUPPAUGE] = {
+		.name		= "Hauppauge WinTV 34xxx models",
+		.tuner_type     = UNSET,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.tda9887_conf   = TDA9887_PRESENT,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0xff00,  // internal decoder
+		}, {
+			.type   = CX88_VMUX_DEBUG,
+			.vmux   = 0,
+			.gpio0  = 0xff01,  // mono from tuner chip
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0xff02,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0xff02,
+		} },
+		.radio = {
+			.type   = CX88_RADIO,
+			.gpio0  = 0xff01,
+		},
+	},
+	[CX88_BOARD_GDI] = {
+		.name		= "GDI Black Gold",
+		.tuner_type     = UNSET,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+		} },
+	},
+	[CX88_BOARD_PIXELVIEW] = {
+		.name           = "PixelView",
+		.tuner_type     = TUNER_PHILIPS_PAL,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0xff00,  // internal decoder
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+		} },
+		.radio = {
+			 .type  = CX88_RADIO,
+			 .gpio0 = 0xff10,
+		},
+	},
+	[CX88_BOARD_ATI_WONDER_PRO] = {
+		.name           = "ATI TV Wonder Pro",
+		.tuner_type     = TUNER_PHILIPS_4IN1,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.tda9887_conf   = TDA9887_PRESENT | TDA9887_INTERCARRIER,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0x03ff,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0x03fe,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0x03fe,
+		} },
+	},
+	[CX88_BOARD_WINFAST2000XP_EXPERT] = {
+		.name           = "Leadtek Winfast 2000XP Expert",
+		.tuner_type     = TUNER_PHILIPS_4IN1,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.tda9887_conf   = TDA9887_PRESENT,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0	= 0x00F5e700,
+			.gpio1  = 0x00003004,
+			.gpio2  = 0x00F5e700,
+			.gpio3  = 0x02000000,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0	= 0x00F5c700,
+			.gpio1  = 0x00003004,
+			.gpio2  = 0x00F5c700,
+			.gpio3  = 0x02000000,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0	= 0x00F5c700,
+			.gpio1  = 0x00003004,
+			.gpio2  = 0x00F5c700,
+			.gpio3  = 0x02000000,
+		} },
+		.radio = {
+			.type   = CX88_RADIO,
+			.gpio0	= 0x00F5d700,
+			.gpio1  = 0x00003004,
+			.gpio2  = 0x00F5d700,
+			.gpio3  = 0x02000000,
+		},
+	},
+	[CX88_BOARD_AVERTV_STUDIO_303] = {
+		.name           = "AverTV Studio 303 (M126)",
+		.tuner_type     = TUNER_PHILIPS_FM1216ME_MK3,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.tda9887_conf   = TDA9887_PRESENT,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio1  = 0xe09f,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio1  = 0xe05f,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio1  = 0xe05f,
+		} },
+		.radio = {
+			.gpio1  = 0xe0df,
+			.type   = CX88_RADIO,
+		},
+	},
+	[CX88_BOARD_MSI_TVANYWHERE_MASTER] = {
+		// added gpio values thanks to Michal
+		// values for PAL from DScaler
+		.name           = "MSI TV-@nywhere Master",
+		.tuner_type     = TUNER_MT2032,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.tda9887_conf	= TDA9887_PRESENT | TDA9887_INTERCARRIER_NTSC,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0x000040bf,
+			.gpio1  = 0x000080c0,
+			.gpio2  = 0x0000ff40,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0x000040bf,
+			.gpio1  = 0x000080c0,
+			.gpio2  = 0x0000ff40,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0x000040bf,
+			.gpio1  = 0x000080c0,
+			.gpio2  = 0x0000ff40,
+		} },
+		.radio = {
+			 .type   = CX88_RADIO,
+			 .vmux   = 3,
+			 .gpio0  = 0x000040bf,
+			 .gpio1  = 0x000080c0,
+			 .gpio2  = 0x0000ff20,
+		},
+	},
+	[CX88_BOARD_WINFAST_DV2000] = {
+		.name           = "Leadtek Winfast DV2000",
+		.tuner_type     = TUNER_PHILIPS_FM1216ME_MK3,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.tda9887_conf   = TDA9887_PRESENT,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0x0035e700,
+			.gpio1  = 0x00003004,
+			.gpio2  = 0x0035e700,
+			.gpio3  = 0x02000000,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0x0035c700,
+			.gpio1  = 0x00003004,
+			.gpio2  = 0x0035c700,
+			.gpio3  = 0x02000000,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0x0035c700,
+			.gpio1  = 0x0035c700,
+			.gpio2  = 0x02000000,
+			.gpio3  = 0x02000000,
+		} },
+		.radio = {
+			.type   = CX88_RADIO,
+			.gpio0  = 0x0035d700,
+			.gpio1  = 0x00007004,
+			.gpio2  = 0x0035d700,
+			.gpio3  = 0x02000000,
+		},
+	},
+	[CX88_BOARD_LEADTEK_PVR2000] = {
+		// gpio values for PAL version from regspy by DScaler
+		.name           = "Leadtek PVR 2000",
+		.tuner_type     = TUNER_PHILIPS_FM1216ME_MK3,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.tda9887_conf   = TDA9887_PRESENT,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0x0000bde2,
+			.audioroute = 1,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0x0000bde6,
+			.audioroute = 1,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0x0000bde6,
+			.audioroute = 1,
+		} },
+		.radio = {
+			.type   = CX88_RADIO,
+			.gpio0  = 0x0000bd62,
+			.audioroute = 1,
+		},
+		.mpeg           = CX88_MPEG_BLACKBIRD,
+	},
+	[CX88_BOARD_IODATA_GVVCP3PCI] = {
+		.name		= "IODATA GV-VCP3/PCI",
+		.tuner_type     = UNSET,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 0,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE2,
+			.vmux   = 1,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+		} },
+	},
+	[CX88_BOARD_PROLINK_PLAYTVPVR] = {
+		.name           = "Prolink PlayTV PVR",
+		.tuner_type     = TUNER_PHILIPS_FM1236_MK3,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.tda9887_conf	= TDA9887_PRESENT,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0xbff0,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0xbff3,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0xbff3,
+		} },
+		.radio = {
+			.type   = CX88_RADIO,
+			.gpio0  = 0xbff0,
+		},
+	},
+	[CX88_BOARD_ASUS_PVR_416] = {
+		.name		= "ASUS PVR-416",
+		.tuner_type     = TUNER_PHILIPS_FM1236_MK3,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.tda9887_conf   = TDA9887_PRESENT,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0x0000fde6,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0x0000fde6, // 0x0000fda6 L,R RCA audio in?
+			.audioroute = 1,
+		} },
+		.radio = {
+			.type   = CX88_RADIO,
+			.gpio0  = 0x0000fde2,
+		},
+		.mpeg           = CX88_MPEG_BLACKBIRD,
+	},
+	[CX88_BOARD_MSI_TVANYWHERE] = {
+		.name           = "MSI TV-@nywhere",
+		.tuner_type     = TUNER_MT2032,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.tda9887_conf   = TDA9887_PRESENT,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0x00000fbf,
+			.gpio2  = 0x0000fc08,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0x00000fbf,
+			.gpio2  = 0x0000fc68,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0x00000fbf,
+			.gpio2  = 0x0000fc68,
+		} },
+	},
+	[CX88_BOARD_KWORLD_DVB_T] = {
+		.name           = "KWorld/VStream XPert DVB-T",
+		.tuner_type     = UNSET,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0x0700,
+			.gpio2  = 0x0101,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0x0700,
+			.gpio2  = 0x0101,
+		} },
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_DVICO_FUSIONHDTV_DVB_T1] = {
+		.name           = "DViCO FusionHDTV DVB-T1",
+		.tuner_type     = UNSET, /* No analog tuner */
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0x000027df,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0x000027df,
+		} },
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_KWORLD_LTV883] = {
+		.name           = "KWorld LTV883RF",
+		.tuner_type     = TUNER_TNF_8831BGFF,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0x07f8,
+		}, {
+			.type   = CX88_VMUX_DEBUG,
+			.vmux   = 0,
+			.gpio0  = 0x07f9,  // mono from tuner chip
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0x000007fa,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0x000007fa,
+		} },
+		.radio = {
+			.type   = CX88_RADIO,
+			.gpio0  = 0x000007f8,
+		},
+	},
+	[CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q] = {
+		.name		= "DViCO FusionHDTV 3 Gold-Q",
+		.tuner_type     = TUNER_MICROTUNE_4042FI5,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		/*
+		 * GPIO[0] resets DT3302 DTV receiver
+		 *     0 - reset asserted
+		 *     1 - normal operation
+		 * GPIO[1] mutes analog audio output connector
+		 *     0 - enable selected source
+		 *     1 - mute
+		 * GPIO[2] selects source for analog audio output connector
+		 *     0 - analog audio input connector on tab
+		 *     1 - analog DAC output from CX23881 chip
+		 * GPIO[3] selects RF input connector on tuner module
+		 *     0 - RF connector labeled CABLE
+		 *     1 - RF connector labeled ANT
+		 * GPIO[4] selects high RF for QAM256 mode
+		 *     0 - normal RF
+		 *     1 - high RF
+		 */
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0	= 0x0f0d,
+		}, {
+			.type   = CX88_VMUX_CABLE,
+			.vmux   = 0,
+			.gpio0	= 0x0f05,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0	= 0x0f00,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0	= 0x0f00,
+		} },
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_HAUPPAUGE_DVB_T1] = {
+		.name           = "Hauppauge Nova-T DVB-T",
+		.tuner_type     = UNSET,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_DVB,
+			.vmux   = 0,
+		} },
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_CONEXANT_DVB_T1] = {
+		.name           = "Conexant DVB-T reference design",
+		.tuner_type     = UNSET,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_DVB,
+			.vmux   = 0,
+		} },
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_PROVIDEO_PV259] = {
+		.name		= "Provideo PV259",
+		.tuner_type     = TUNER_PHILIPS_FQ1216ME,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.audioroute = 1,
+		} },
+		.mpeg           = CX88_MPEG_BLACKBIRD,
+	},
+	[CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS] = {
+		.name           = "DViCO FusionHDTV DVB-T Plus",
+		.tuner_type     = UNSET, /* No analog tuner */
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0x000027df,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0x000027df,
+		} },
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_DNTV_LIVE_DVB_T] = {
+		.name		= "digitalnow DNTV Live! DVB-T",
+		.tuner_type     = UNSET,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.input		= { {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0x00000700,
+			.gpio2  = 0x00000101,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0x00000700,
+			.gpio2  = 0x00000101,
+		} },
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_PCHDTV_HD3000] = {
+		.name           = "pcHDTV HD3000 HDTV",
+		.tuner_type     = TUNER_THOMSON_DTT761X,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.tda9887_conf   = TDA9887_PRESENT,
+		/* GPIO[2] = audio source for analog audio out connector
+		 *  0 = analog audio input connector
+		 *  1 = CX88 audio DACs
+		 *
+		 * GPIO[7] = input to CX88's audio/chroma ADC
+		 *  0 = FM 10.7 MHz IF
+		 *  1 = Sound 4.5 MHz IF
+		 *
+		 * GPIO[1,5,6] = Oren 51132 pins 27,35,28 respectively
+		 *
+		 * GPIO[16] = Remote control input
+		 */
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0x00008484,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0x00008400,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0x00008400,
+		} },
+		.radio = {
+			.type   = CX88_RADIO,
+			.gpio0  = 0x00008404,
+		},
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_HAUPPAUGE_ROSLYN] = {
+		// entry added by Kaustubh D. Bhalerao <bhalerao.1@osu.edu>
+		// GPIO values obtained from regspy, courtesy Sean Covel
+		.name           = "Hauppauge WinTV 28xxx (Roslyn) models",
+		.tuner_type     = UNSET,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0xed1a,
+			.gpio2  = 0x00ff,
+		}, {
+			.type   = CX88_VMUX_DEBUG,
+			.vmux   = 0,
+			.gpio0  = 0xff01,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0xff02,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0xed92,
+			.gpio2  = 0x00ff,
+		} },
+		.radio = {
+			 .type   = CX88_RADIO,
+			 .gpio0  = 0xed96,
+			 .gpio2  = 0x00ff,
+		 },
+		.mpeg           = CX88_MPEG_BLACKBIRD,
+	},
+	[CX88_BOARD_DIGITALLOGIC_MEC] = {
+		.name           = "Digital-Logic MICROSPACE Entertainment Center (MEC)",
+		.tuner_type     = TUNER_PHILIPS_FM1216ME_MK3,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.tda9887_conf   = TDA9887_PRESENT,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0x00009d80,
+			.audioroute = 1,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0x00009d76,
+			.audioroute = 1,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0x00009d76,
+			.audioroute = 1,
+		} },
+		.radio = {
+			.type   = CX88_RADIO,
+			.gpio0  = 0x00009d00,
+			.audioroute = 1,
+		},
+		.mpeg           = CX88_MPEG_BLACKBIRD,
+	},
+	[CX88_BOARD_IODATA_GVBCTV7E] = {
+		.name           = "IODATA GV/BCTV7E",
+		.tuner_type     = TUNER_PHILIPS_FQ1286,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.tda9887_conf   = TDA9887_PRESENT,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 1,
+			.gpio1  = 0x0000e03f,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 2,
+			.gpio1  = 0x0000e07f,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 3,
+			.gpio1  = 0x0000e07f,
+		} }
+	},
+	[CX88_BOARD_PIXELVIEW_PLAYTV_ULTRA_PRO] = {
+		.name           = "PixelView PlayTV Ultra Pro (Stereo)",
+		/* May be also TUNER_YMEC_TVF_5533MF for NTSC/M or PAL/M */
+		.tuner_type     = TUNER_PHILIPS_FM1216ME_MK3,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		/*
+		 * Some variants use a tda9874 and so need the
+		 * tvaudio module.
+		 */
+		.audio_chip     = CX88_AUDIO_TVAUDIO,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0xbf61,  /* internal decoder */
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0	= 0xbf63,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0	= 0xbf63,
+		} },
+		.radio = {
+			 .type  = CX88_RADIO,
+			 .gpio0 = 0xbf60,
+		 },
+	},
+	[CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T] = {
+		.name           = "DViCO FusionHDTV 3 Gold-T",
+		.tuner_type     = TUNER_THOMSON_DTT761X,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.tda9887_conf   = TDA9887_PRESENT,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0x97ed,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0x97e9,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0x97e9,
+		} },
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_ADSTECH_DVB_T_PCI] = {
+		.name           = "ADS Tech Instant TV DVB-T PCI",
+		.tuner_type     = UNSET,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0x0700,
+			.gpio2  = 0x0101,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0x0700,
+			.gpio2  = 0x0101,
+		} },
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1] = {
+		.name           = "TerraTec Cinergy 1400 DVB-T",
+		.tuner_type     = UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_DVB,
+			.vmux   = 0,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 2,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+		} },
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD] = {
+		.name           = "DViCO FusionHDTV 5 Gold",
+		.tuner_type     = TUNER_LG_TDVS_H06XF, /* TDVS-H062F */
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.tda9887_conf   = TDA9887_PRESENT,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0x87fd,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0x87f9,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0x87f9,
+		} },
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_AVERMEDIA_ULTRATV_MC_550] = {
+		.name           = "AverMedia UltraTV Media Center PCI 550",
+		.tuner_type     = TUNER_PHILIPS_FM1236_MK3,
+		.radio_type     = UNSET,
+		.tuner_addr     = ADDR_UNSET,
+		.radio_addr     = ADDR_UNSET,
+		.tda9887_conf   = TDA9887_PRESENT,
+		.input          = { {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 0,
+			.gpio0  = 0x0000cd73,
+			.audioroute = 1,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 1,
+			.gpio0  = 0x0000cd73,
+			.audioroute = 1,
+		}, {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 3,
+			.gpio0  = 0x0000cdb3,
+			.audioroute = 1,
+		} },
+		.radio = {
+			.type   = CX88_RADIO,
+			.vmux   = 2,
+			.gpio0  = 0x0000cdf3,
+			.audioroute = 1,
+		},
+		.mpeg           = CX88_MPEG_BLACKBIRD,
+	},
+	[CX88_BOARD_KWORLD_VSTREAM_EXPERT_DVD] = {
+		 /* Alexander Wold <awold@bigfoot.com> */
+		 .name           = "Kworld V-Stream Xpert DVD",
+		 .tuner_type     = UNSET,
+		 .input          = { {
+			 .type   = CX88_VMUX_COMPOSITE1,
+			 .vmux   = 1,
+			 .gpio0  = 0x03000000,
+			 .gpio1  = 0x01000000,
+			 .gpio2  = 0x02000000,
+			 .gpio3  = 0x00100000,
+		 }, {
+			 .type   = CX88_VMUX_SVIDEO,
+			 .vmux   = 2,
+			 .gpio0  = 0x03000000,
+			 .gpio1  = 0x01000000,
+			 .gpio2  = 0x02000000,
+			 .gpio3  = 0x00100000,
+		 } },
+	},
+	[CX88_BOARD_ATI_HDTVWONDER] = {
+		.name           = "ATI HDTV Wonder",
+		.tuner_type     = TUNER_PHILIPS_TUV1236D,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0x00000ff7,
+			.gpio1  = 0x000000ff,
+			.gpio2  = 0x00000001,
+			.gpio3  = 0x00000000,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0x00000ffe,
+			.gpio1  = 0x000000ff,
+			.gpio2  = 0x00000001,
+			.gpio3  = 0x00000000,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0x00000ffe,
+			.gpio1  = 0x000000ff,
+			.gpio2  = 0x00000001,
+			.gpio3  = 0x00000000,
+		} },
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_WINFAST_DTV1000] = {
+		.name           = "WinFast DTV1000-T",
+		.tuner_type     = UNSET,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_DVB,
+			.vmux   = 0,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+		} },
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_AVERTV_303] = {
+		.name           = "AVerTV 303 (M126)",
+		.tuner_type     = TUNER_PHILIPS_FM1216ME_MK3,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.tda9887_conf   = TDA9887_PRESENT,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0x00ff,
+			.gpio1  = 0xe09f,
+			.gpio2  = 0x0010,
+			.gpio3  = 0x0000,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0x00ff,
+			.gpio1  = 0xe05f,
+			.gpio2  = 0x0010,
+			.gpio3  = 0x0000,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0x00ff,
+			.gpio1  = 0xe05f,
+			.gpio2  = 0x0010,
+			.gpio3  = 0x0000,
+		} },
+	},
+	[CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1] = {
+		.name		= "Hauppauge Nova-S-Plus DVB-S",
+		.tuner_type	= UNSET,
+		.radio_type	= UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.audio_chip	= CX88_AUDIO_WM8775,
+		.i2sinputcntl   = 2,
+		.input		= { {
+			.type	= CX88_VMUX_DVB,
+			.vmux	= 0,
+			/* 2: Line-In */
+			.audioroute = 2,
+		}, {
+			.type	= CX88_VMUX_COMPOSITE1,
+			.vmux	= 1,
+			/* 2: Line-In */
+			.audioroute = 2,
+		}, {
+			.type	= CX88_VMUX_SVIDEO,
+			.vmux	= 2,
+			/* 2: Line-In */
+			.audioroute = 2,
+		} },
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_HAUPPAUGE_NOVASE2_S1] = {
+		.name		= "Hauppauge Nova-SE2 DVB-S",
+		.tuner_type	= UNSET,
+		.radio_type	= UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.input		= { {
+			.type	= CX88_VMUX_DVB,
+			.vmux	= 0,
+		} },
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_KWORLD_DVBS_100] = {
+		.name		= "KWorld DVB-S 100",
+		.tuner_type	= UNSET,
+		.radio_type	= UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.audio_chip = CX88_AUDIO_WM8775,
+		.input		= { {
+			.type	= CX88_VMUX_DVB,
+			.vmux	= 0,
+			/* 2: Line-In */
+			.audioroute = 2,
+		}, {
+			.type	= CX88_VMUX_COMPOSITE1,
+			.vmux	= 1,
+			/* 2: Line-In */
+			.audioroute = 2,
+		}, {
+			.type	= CX88_VMUX_SVIDEO,
+			.vmux	= 2,
+			/* 2: Line-In */
+			.audioroute = 2,
+		} },
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_HAUPPAUGE_HVR1100] = {
+		.name		= "Hauppauge WinTV-HVR1100 DVB-T/Hybrid",
+		.tuner_type     = TUNER_PHILIPS_FMD1216ME_MK3,
+		.radio_type	= UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.tda9887_conf   = TDA9887_PRESENT,
+		.input		= { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+		}, {
+			.type	= CX88_VMUX_COMPOSITE1,
+			.vmux	= 1,
+		}, {
+			.type	= CX88_VMUX_SVIDEO,
+			.vmux	= 2,
+		} },
+		/* fixme: Add radio support */
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_HAUPPAUGE_HVR1100LP] = {
+		.name		= "Hauppauge WinTV-HVR1100 DVB-T/Hybrid (Low Profile)",
+		.tuner_type     = TUNER_PHILIPS_FMD1216ME_MK3,
+		.radio_type	= UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.tda9887_conf   = TDA9887_PRESENT,
+		.input		= { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+		}, {
+			.type	= CX88_VMUX_COMPOSITE1,
+			.vmux	= 1,
+		} },
+		/* fixme: Add radio support */
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_DNTV_LIVE_DVB_T_PRO] = {
+		.name           = "digitalnow DNTV Live! DVB-T Pro",
+		.tuner_type     = TUNER_PHILIPS_FMD1216ME_MK3,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.tda9887_conf   = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE |
+				  TDA9887_PORT2_ACTIVE,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0xf80808,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0	= 0xf80808,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0	= 0xf80808,
+		} },
+		.radio = {
+			 .type  = CX88_RADIO,
+			 .gpio0 = 0xf80808,
+		},
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_KWORLD_DVB_T_CX22702] = {
+		/* Kworld V-stream Xpert DVB-T with Thomson tuner */
+		/* DTT 7579 Conexant CX22702-19 Conexant CX2388x  */
+		/* Manenti Marco <marco_manenti@colman.it> */
+		.name           = "KWorld/VStream XPert DVB-T with cx22702",
+		.tuner_type     = UNSET,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0x0700,
+			.gpio2  = 0x0101,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0x0700,
+			.gpio2  = 0x0101,
+		} },
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL] = {
+		.name           = "DViCO FusionHDTV DVB-T Dual Digital",
+		.tuner_type     = UNSET, /* No analog tuner */
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0x000067df,
+		 }, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0x000067df,
+		} },
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_KWORLD_HARDWARE_MPEG_TV_XPERT] = {
+		.name           = "KWorld HardwareMpegTV XPert",
+		.tuner_type     = TUNER_PHILIPS_TDA8290,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0x3de2,
+			.gpio2  = 0x00ff,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0x3de6,
+			.audioroute = 1,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0x3de6,
+			.audioroute = 1,
+		} },
+		.radio = {
+			.type   = CX88_RADIO,
+			.gpio0  = 0x3de6,
+			.gpio2  = 0x00ff,
+		},
+		.mpeg           = CX88_MPEG_BLACKBIRD,
+	},
+	[CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_HYBRID] = {
+		.name           = "DViCO FusionHDTV DVB-T Hybrid",
+		.tuner_type     = TUNER_THOMSON_FE6600,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0x0000a75f,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0x0000a75b,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0x0000a75b,
+		} },
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_PCHDTV_HD5500] = {
+		.name           = "pcHDTV HD5500 HDTV",
+		.tuner_type     = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.tda9887_conf   = TDA9887_PRESENT,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0x87fd,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0x87f9,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0x87f9,
+		} },
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_KWORLD_MCE200_DELUXE] = {
+		/*
+		 * FIXME: tested TV input only, disabled composite,
+		 * svideo and radio until they can be tested also.
+		 */
+		.name           = "Kworld MCE 200 Deluxe",
+		.tuner_type     = TUNER_TENA_9533_DI,
+		.radio_type     = UNSET,
+		.tda9887_conf   = TDA9887_PRESENT,
+		.tuner_addr     = ADDR_UNSET,
+		.radio_addr     = ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0x0000BDE6
+		} },
+		.mpeg           = CX88_MPEG_BLACKBIRD,
+	},
+	[CX88_BOARD_PIXELVIEW_PLAYTV_P7000] = {
+		/* FIXME: SVideo, Composite and FM inputs are untested */
+		.name           = "PixelView PlayTV P7000",
+		.tuner_type     = TUNER_PHILIPS_FM1216ME_MK3,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.tda9887_conf   = TDA9887_PRESENT | TDA9887_PORT1_ACTIVE |
+				  TDA9887_PORT2_ACTIVE,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0x5da6,
+		} },
+		.mpeg           = CX88_MPEG_BLACKBIRD,
+	},
+	[CX88_BOARD_NPGTECH_REALTV_TOP10FM] = {
+		.name           = "NPG Tech Real TV FM Top 10",
+		.tuner_type     = TUNER_TNF_5335MF, /* Actually a TNF9535 */
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0	= 0x0788,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0	= 0x078b,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0	= 0x078b,
+		} },
+		.radio = {
+			 .type  = CX88_RADIO,
+			 .gpio0 = 0x074a,
+		},
+	},
+	[CX88_BOARD_WINFAST_DTV2000H] = {
+		.name           = "WinFast DTV2000 H",
+		.tuner_type     = TUNER_PHILIPS_FMD1216ME_MK3,
+		.radio_type     = UNSET,
+		.tuner_addr     = ADDR_UNSET,
+		.radio_addr     = ADDR_UNSET,
+		.tda9887_conf   = TDA9887_PRESENT,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0x00017304,
+			.gpio1  = 0x00008203,
+			.gpio2  = 0x00017304,
+			.gpio3  = 0x02000000,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0x0001d701,
+			.gpio1  = 0x0000b207,
+			.gpio2  = 0x0001d701,
+			.gpio3  = 0x02000000,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE2,
+			.vmux   = 2,
+			.gpio0  = 0x0001d503,
+			.gpio1  = 0x0000b207,
+			.gpio2  = 0x0001d503,
+			.gpio3  = 0x02000000,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 3,
+			.gpio0  = 0x0001d701,
+			.gpio1  = 0x0000b207,
+			.gpio2  = 0x0001d701,
+			.gpio3  = 0x02000000,
+		} },
+		.radio = {
+			 .type  = CX88_RADIO,
+			 .gpio0 = 0x00015702,
+			 .gpio1 = 0x0000f207,
+			 .gpio2 = 0x00015702,
+			 .gpio3 = 0x02000000,
+		},
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_WINFAST_DTV2000H_J] = {
+		.name           = "WinFast DTV2000 H rev. J",
+		.tuner_type     = TUNER_PHILIPS_FMD1216MEX_MK3,
+		.radio_type     = UNSET,
+		.tuner_addr     = ADDR_UNSET,
+		.radio_addr     = ADDR_UNSET,
+		.tda9887_conf   = TDA9887_PRESENT,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0x00017300,
+			.gpio1  = 0x00008207,
+			.gpio2	= 0x00000000,
+			.gpio3  = 0x02000000,
+		}, {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0x00018300,
+			.gpio1  = 0x0000f207,
+			.gpio2	= 0x00017304,
+			.gpio3  = 0x02000000,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0x00018301,
+			.gpio1  = 0x0000f207,
+			.gpio2	= 0x00017304,
+			.gpio3  = 0x02000000,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0x00018301,
+			.gpio1  = 0x0000f207,
+			.gpio2	= 0x00017304,
+			.gpio3  = 0x02000000,
+		} },
+		.radio = {
+			 .type  = CX88_RADIO,
+			 .gpio0 = 0x00015702,
+			 .gpio1 = 0x0000f207,
+			 .gpio2 = 0x00015702,
+			 .gpio3 = 0x02000000,
+		},
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_GENIATECH_DVBS] = {
+		.name          = "Geniatech DVB-S",
+		.tuner_type    = UNSET,
+		.radio_type    = UNSET,
+		.tuner_addr    = ADDR_UNSET,
+		.radio_addr    = ADDR_UNSET,
+		.input  = { {
+			.type  = CX88_VMUX_DVB,
+			.vmux  = 0,
+		}, {
+			.type  = CX88_VMUX_COMPOSITE1,
+			.vmux  = 1,
+		} },
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_HAUPPAUGE_HVR3000] = {
+		.name           = "Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T",
+		.tuner_type     = TUNER_PHILIPS_FMD1216ME_MK3,
+		.radio_type     = UNSET,
+		.tuner_addr     = ADDR_UNSET,
+		.radio_addr     = ADDR_UNSET,
+		.tda9887_conf   = TDA9887_PRESENT,
+		.audio_chip     = CX88_AUDIO_WM8775,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0x84bf,
+			/* 1: TV Audio / FM Mono */
+			.audioroute = 1,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0x84bf,
+			/* 2: Line-In */
+			.audioroute = 2,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0x84bf,
+			/* 2: Line-In */
+			.audioroute = 2,
+		} },
+		.radio = {
+			.type   = CX88_RADIO,
+			.gpio0	= 0x84bf,
+			/* 4: FM Stereo (untested) */
+			.audioroute = 8,
+		},
+		.mpeg           = CX88_MPEG_DVB,
+		.num_frontends	= 2,
+	},
+	[CX88_BOARD_NORWOOD_MICRO] = {
+		.name           = "Norwood Micro TV Tuner",
+		.tuner_type     = TUNER_TNF_5335MF,
+		.radio_type     = UNSET,
+		.tuner_addr     = ADDR_UNSET,
+		.radio_addr     = ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0x0709,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0x070b,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0x070b,
+		} },
+	},
+	[CX88_BOARD_TE_DTV_250_OEM_SWANN] = {
+		.name           = "Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann OEM",
+		.tuner_type     = TUNER_LG_PAL_NEW_TAPC,
+		.radio_type     = UNSET,
+		.tuner_addr     = ADDR_UNSET,
+		.radio_addr     = ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0x003fffff,
+			.gpio1  = 0x00e00000,
+			.gpio2  = 0x003fffff,
+			.gpio3  = 0x02000000,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0x003fffff,
+			.gpio1  = 0x00e00000,
+			.gpio2  = 0x003fffff,
+			.gpio3  = 0x02000000,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0x003fffff,
+			.gpio1  = 0x00e00000,
+			.gpio2  = 0x003fffff,
+			.gpio3  = 0x02000000,
+		} },
+	},
+	[CX88_BOARD_HAUPPAUGE_HVR1300] = {
+		.name		= "Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder",
+		.tuner_type     = TUNER_PHILIPS_FMD1216ME_MK3,
+		.radio_type	= UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.tda9887_conf   = TDA9887_PRESENT,
+		.audio_chip     = CX88_AUDIO_WM8775,
+		/*
+		 * gpio0 as reported by Mike Crash <mike AT mikecrash.com>
+		 */
+		.input		= { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0	= 0xef88,
+			/* 1: TV Audio / FM Mono */
+			.audioroute = 1,
+		}, {
+			.type	= CX88_VMUX_COMPOSITE1,
+			.vmux	= 1,
+			.gpio0	= 0xef88,
+			/* 2: Line-In */
+			.audioroute = 2,
+		}, {
+			.type	= CX88_VMUX_SVIDEO,
+			.vmux	= 2,
+			.gpio0	= 0xef88,
+			/* 2: Line-In */
+			.audioroute = 2,
+		} },
+		.mpeg           = CX88_MPEG_DVB | CX88_MPEG_BLACKBIRD,
+		.radio = {
+			.type   = CX88_RADIO,
+			.gpio0	= 0xef88,
+			/* 4: FM Stereo (untested) */
+			.audioroute = 8,
+		},
+	},
+	[CX88_BOARD_SAMSUNG_SMT_7020] = {
+		.name		= "Samsung SMT 7020 DVB-S",
+		.tuner_type	= UNSET,
+		.radio_type	= UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.input		= { {
+			.type	= CX88_VMUX_DVB,
+			.vmux	= 0,
+		} },
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_ADSTECH_PTV_390] = {
+		.name           = "ADS Tech Instant Video PCI",
+		.tuner_type     = UNSET,
+		.radio_type     = UNSET,
+		.tuner_addr     = ADDR_UNSET,
+		.radio_addr     = ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_DEBUG,
+			.vmux   = 3,
+			.gpio0  = 0x04ff,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0x07fa,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0x07fa,
+		} },
+	},
+	[CX88_BOARD_PINNACLE_PCTV_HD_800i] = {
+		.name           = "Pinnacle PCTV HD 800i",
+		.tuner_type     = TUNER_XC5000,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0x04fb,
+			.gpio1  = 0x10ff,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0x04fb,
+			.gpio1  = 0x10ef,
+			.audioroute = 1,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0x04fb,
+			.gpio1  = 0x10ef,
+			.audioroute = 1,
+		} },
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO] = {
+		.name           = "DViCO FusionHDTV 5 PCI nano",
+		/* xc3008 tuner, digital only for now */
+		.tuner_type     = UNSET,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0x000027df, /* Unconfirmed */
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0x000027df, /* Unconfirmed */
+			.audioroute = 1,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0x000027df, /* Unconfirmed */
+			.audioroute = 1,
+		} },
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_PINNACLE_HYBRID_PCTV] = {
+		.name           = "Pinnacle Hybrid PCTV",
+		.tuner_type     = TUNER_XC2028,
+		.tuner_addr     = 0x61,
+		.radio_type     = UNSET,
+		.radio_addr     = ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0x004ff,
+			.gpio1  = 0x010ff,
+			.gpio2  = 0x00001,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0x004fb,
+			.gpio1  = 0x010ef,
+			.audioroute = 1,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0x004fb,
+			.gpio1  = 0x010ef,
+			.audioroute = 1,
+		} },
+		.radio = {
+			.type   = CX88_RADIO,
+			.gpio0  = 0x004ff,
+			.gpio1  = 0x010ff,
+			.gpio2  = 0x0ff,
+		},
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	/* Terry Wu <terrywu2009@gmail.com> */
+	/* TV Audio :      set GPIO 2, 18, 19 value to 0, 1, 0 */
+	/* FM Audio :      set GPIO 2, 18, 19 value to 0, 0, 0 */
+	/* Line-in Audio : set GPIO 2, 18, 19 value to 0, 1, 1 */
+	/* Mute Audio :    set GPIO 2 value to 1               */
+	[CX88_BOARD_WINFAST_TV2000_XP_GLOBAL] = {
+		.name           = "Leadtek TV2000 XP Global",
+		.tuner_type     = TUNER_XC2028,
+		.tuner_addr     = 0x61,
+		.radio_type     = UNSET,
+		.radio_addr     = ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0x0400,       /* pin 2 = 0 */
+			.gpio1  = 0x0000,
+			.gpio2  = 0x0C04,       /* pin 18 = 1, pin 19 = 0 */
+			.gpio3  = 0x0000,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0x0400,       /* pin 2 = 0 */
+			.gpio1  = 0x0000,
+			.gpio2  = 0x0C0C,       /* pin 18 = 1, pin 19 = 1 */
+			.gpio3  = 0x0000,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0x0400,       /* pin 2 = 0 */
+			.gpio1  = 0x0000,
+			.gpio2  = 0x0C0C,       /* pin 18 = 1, pin 19 = 1 */
+			.gpio3  = 0x0000,
+		} },
+		.radio = {
+			.type   = CX88_RADIO,
+			.gpio0  = 0x0400,        /* pin 2 = 0 */
+			.gpio1  = 0x0000,
+			.gpio2  = 0x0C00,       /* pin 18 = 0, pin 19 = 0 */
+			.gpio3  = 0x0000,
+		},
+	},
+	[CX88_BOARD_WINFAST_TV2000_XP_GLOBAL_6F36] = {
+		.name           = "Leadtek TV2000 XP Global (SC4100)",
+		.tuner_type     = TUNER_XC4000,
+		.tuner_addr     = 0x61,
+		.radio_type     = UNSET,
+		.radio_addr     = ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0x0400,       /* pin 2 = 0 */
+			.gpio1  = 0x0000,
+			.gpio2  = 0x0C04,       /* pin 18 = 1, pin 19 = 0 */
+			.gpio3  = 0x0000,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0x0400,       /* pin 2 = 0 */
+			.gpio1  = 0x0000,
+			.gpio2  = 0x0C0C,       /* pin 18 = 1, pin 19 = 1 */
+			.gpio3  = 0x0000,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0x0400,       /* pin 2 = 0 */
+			.gpio1  = 0x0000,
+			.gpio2  = 0x0C0C,       /* pin 18 = 1, pin 19 = 1 */
+			.gpio3  = 0x0000,
+		} },
+		.radio = {
+			.type   = CX88_RADIO,
+			.gpio0  = 0x0400,        /* pin 2 = 0 */
+			.gpio1  = 0x0000,
+			.gpio2  = 0x0C00,       /* pin 18 = 0, pin 19 = 0 */
+			.gpio3  = 0x0000,
+		},
+	},
+	[CX88_BOARD_WINFAST_TV2000_XP_GLOBAL_6F43] = {
+		.name           = "Leadtek TV2000 XP Global (XC4100)",
+		.tuner_type     = TUNER_XC4000,
+		.tuner_addr     = 0x61,
+		.radio_type     = UNSET,
+		.radio_addr     = ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0x0400,       /* pin 2 = 0 */
+			.gpio1  = 0x6040,       /* pin 14 = 1, pin 13 = 0 */
+			.gpio2  = 0x0000,
+			.gpio3  = 0x0000,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0x0400,       /* pin 2 = 0 */
+			.gpio1  = 0x6060,       /* pin 14 = 1, pin 13 = 1 */
+			.gpio2  = 0x0000,
+			.gpio3  = 0x0000,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0x0400,       /* pin 2 = 0 */
+			.gpio1  = 0x6060,       /* pin 14 = 1, pin 13 = 1 */
+			.gpio2  = 0x0000,
+			.gpio3  = 0x0000,
+		} },
+		.radio = {
+			.type   = CX88_RADIO,
+			.gpio0  = 0x0400,        /* pin 2 = 0 */
+			.gpio1  = 0x6000,        /* pin 14 = 1, pin 13 = 0 */
+			.gpio2  = 0x0000,
+			.gpio3  = 0x0000,
+		},
+	},
+	[CX88_BOARD_POWERCOLOR_REAL_ANGEL] = {
+		/* Long names may confuse LIRC. */
+		.name           = "PowerColor RA330",
+		.tuner_type     = TUNER_XC2028,
+		.tuner_addr     = 0x61,
+		.input          = { {
+			/*
+			 * Due to the way the cx88 driver is written,
+			 * there is no way to deactivate audio pass-
+			 * through without this entry. Furthermore, if
+			 * the TV mux entry is first, you get audio
+			 * from the tuner on boot for a little while.
+			 */
+			.type   = CX88_VMUX_DEBUG,
+			.vmux   = 3,
+			.gpio0 = 0x00ff,
+			.gpio1 = 0xf39d,
+			.gpio3 = 0x0000,
+		}, {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0 = 0x00ff,
+			.gpio1 = 0xf35d,
+			.gpio3 = 0x0000,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0 = 0x00ff,
+			.gpio1 = 0xf37d,
+			.gpio3 = 0x0000,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0x000ff,
+			.gpio1  = 0x0f37d,
+			.gpio3  = 0x00000,
+		} },
+		.radio = {
+			.type   = CX88_RADIO,
+			.gpio0  = 0x000ff,
+			.gpio1  = 0x0f35d,
+			.gpio3  = 0x00000,
+		},
+	},
+	[CX88_BOARD_GENIATECH_X8000_MT] = {
+		/* Also PowerColor Real Angel 330 and Geniatech X800 OEM */
+		.name           = "Geniatech X8000-MT DVBT",
+		.tuner_type     = TUNER_XC2028,
+		.tuner_addr     = 0x61,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0x00000000,
+			.gpio1  = 0x00e3e341,
+			.gpio2  = 0x00000000,
+			.gpio3  = 0x00000000,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0x00000000,
+			.gpio1  = 0x00e3e361,
+			.gpio2  = 0x00000000,
+			.gpio3  = 0x00000000,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0x00000000,
+			.gpio1  = 0x00e3e361,
+			.gpio2  = 0x00000000,
+			.gpio3  = 0x00000000,
+		} },
+		.radio = {
+			.type   = CX88_RADIO,
+			.gpio0  = 0x00000000,
+			.gpio1  = 0x00e3e341,
+			.gpio2  = 0x00000000,
+			.gpio3  = 0x00000000,
+		},
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_NOTONLYTV_LV3H] = {
+		.name           = "NotOnlyTV LV3H",
+		.tuner_type     = TUNER_XC2028,
+		.radio_type     = UNSET,
+		.tuner_addr     = 0x61,
+		.radio_addr     = ADDR_UNSET,
+		/* if gpio1:bit9 is enabled, DVB-T won't work */
+
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0x0000,
+			.gpio1  = 0xa141,
+			.gpio2  = 0x0000,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0x0000,
+			.gpio1  = 0xa161,
+			.gpio2  = 0x0000,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0x0000,
+			.gpio1  = 0xa161,
+			.gpio2  = 0x0000,
+		} },
+		.radio = {
+			.type   = CX88_RADIO,
+			.gpio0  = 0x0000,
+			.gpio1  = 0xa141,
+			.gpio2  = 0x0000,
+		},
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO] = {
+		.name           = "DViCO FusionHDTV DVB-T PRO",
+		.tuner_type     = TUNER_XC2028,
+		.tuner_addr     = 0x61,
+		.radio_type     = UNSET,
+		.radio_addr     = ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0x000067df,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0x000067df,
+		} },
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD] = {
+		.name           = "DViCO FusionHDTV 7 Gold",
+		.tuner_type     = TUNER_XC5000,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0x10df,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0x16d9,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0x16d9,
+		} },
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_PROLINK_PV_8000GT] = {
+		.name           = "Prolink Pixelview MPEG 8000GT",
+		.tuner_type     = TUNER_XC2028,
+		.tuner_addr     = 0x61,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0 = 0x0ff,
+			.gpio2 = 0x0cfb,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio2 = 0x0cfb,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio2 = 0x0cfb,
+		} },
+		.radio = {
+			.type   = CX88_RADIO,
+			.gpio2 = 0x0cfb,
+		},
+	},
+	[CX88_BOARD_PROLINK_PV_GLOBAL_XTREME] = {
+		.name           = "Prolink Pixelview Global Extreme",
+		.tuner_type     = TUNER_XC2028,
+		.tuner_addr     = 0x61,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0 = 0x04fb,
+			.gpio1 = 0x04080,
+			.gpio2 = 0x0cf7,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0 = 0x04fb,
+			.gpio1 = 0x04080,
+			.gpio2 = 0x0cfb,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0 = 0x04fb,
+			.gpio1 = 0x04080,
+			.gpio2 = 0x0cfb,
+		} },
+		.radio = {
+			.type   = CX88_RADIO,
+			.gpio0 = 0x04ff,
+			.gpio1 = 0x04080,
+			.gpio2 = 0x0cf7,
+		},
+	},
+	/*
+	 * Both radio, analog and ATSC work with this board.
+	 * However, for analog to work, s5h1409 gate should be open,
+	 * otherwise, tuner-xc3028 won't be detected.
+	 * A proper fix require using the newer i2c methods to add
+	 * tuner-xc3028 without doing an i2c probe.
+	 */
+	[CX88_BOARD_KWORLD_ATSC_120] = {
+		.name           = "Kworld PlusTV HD PCI 120 (ATSC 120)",
+		.tuner_type     = TUNER_XC2028,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0x000000ff,
+			.gpio1  = 0x0000f35d,
+			.gpio2  = 0x00000000,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0x000000ff,
+			.gpio1  = 0x0000f37e,
+			.gpio2  = 0x00000000,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0x000000ff,
+			.gpio1  = 0x0000f37e,
+			.gpio2  = 0x00000000,
+		} },
+		.radio = {
+			.type   = CX88_RADIO,
+			.gpio0  = 0x000000ff,
+			.gpio1  = 0x0000f35d,
+			.gpio2  = 0x00000000,
+		},
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_HAUPPAUGE_HVR4000] = {
+		.name           = "Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid",
+		.tuner_type     = TUNER_PHILIPS_FMD1216ME_MK3,
+		.radio_type     = UNSET,
+		.tuner_addr     = ADDR_UNSET,
+		.radio_addr     = ADDR_UNSET,
+		.tda9887_conf   = TDA9887_PRESENT,
+		.audio_chip     = CX88_AUDIO_WM8775,
+		/*
+		 * GPIO0 (WINTV2000)
+		 *
+		 * Analogue     SAT     DVB-T
+		 * Antenna      0xc4bf  0xc4bb
+		 * Composite    0xc4bf  0xc4bb
+		 * S-Video      0xc4bf  0xc4bb
+		 * Composite1   0xc4ff  0xc4fb
+		 * S-Video1     0xc4ff  0xc4fb
+		 *
+		 * BIT  VALUE   FUNCTION GP{x}_IO
+		 * 0    1       I:?
+		 * 1    1       I:?
+		 * 2    1       O:MPEG PORT 0=DVB-T 1=DVB-S
+		 * 3    1       I:?
+		 * 4    1       I:?
+		 * 5    1       I:?
+		 * 6    0       O:INPUT SELECTOR 0=INTERNAL 1=EXPANSION
+		 * 7    1       O:DVB-T DEMOD RESET LOW
+		 *
+		 * BIT  VALUE   FUNCTION GP{x}_OE
+		 * 8    0       I
+		 * 9    0       I
+		 * a    1       O
+		 * b    0       I
+		 * c    0       I
+		 * d    0       I
+		 * e    1       O
+		 * f    1       O
+		 *
+		 * WM8775 ADC
+		 *
+		 * 1: TV Audio / FM Mono
+		 * 2: Line-In
+		 * 3: Line-In Expansion
+		 * 4: FM Stereo
+		 */
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0xc4bf,
+			/* 1: TV Audio / FM Mono */
+			.audioroute = 1,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0xc4bf,
+			/* 2: Line-In */
+			.audioroute = 2,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0xc4bf,
+			/* 2: Line-In */
+			.audioroute = 2,
+		} },
+		.radio = {
+			.type   = CX88_RADIO,
+			.gpio0	= 0xc4bf,
+			/* 4: FM Stereo */
+			.audioroute = 8,
+		},
+		.mpeg           = CX88_MPEG_DVB,
+		.num_frontends	= 2,
+	},
+	[CX88_BOARD_HAUPPAUGE_HVR4000LITE] = {
+		.name           = "Hauppauge WinTV-HVR4000(Lite) DVB-S/S2",
+		.tuner_type     = UNSET,
+		.radio_type     = UNSET,
+		.tuner_addr     = ADDR_UNSET,
+		.radio_addr     = ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_DVB,
+			.vmux   = 0,
+		} },
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_TEVII_S420] = {
+		.name           = "TeVii S420 DVB-S",
+		.tuner_type     = UNSET,
+		.radio_type     = UNSET,
+		.tuner_addr     = ADDR_UNSET,
+		.radio_addr     = ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_DVB,
+			.vmux   = 0,
+		} },
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_TEVII_S460] = {
+		.name           = "TeVii S460 DVB-S/S2",
+		.tuner_type     = UNSET,
+		.radio_type     = UNSET,
+		.tuner_addr     = ADDR_UNSET,
+		.radio_addr     = ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_DVB,
+			.vmux   = 0,
+		} },
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_TEVII_S464] = {
+		.name           = "TeVii S464 DVB-S/S2",
+		.tuner_type     = UNSET,
+		.radio_type     = UNSET,
+		.tuner_addr     = ADDR_UNSET,
+		.radio_addr     = ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_DVB,
+			.vmux   = 0,
+		} },
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_OMICOM_SS4_PCI] = {
+		.name           = "Omicom SS4 DVB-S/S2 PCI",
+		.tuner_type     = UNSET,
+		.radio_type     = UNSET,
+		.tuner_addr     = ADDR_UNSET,
+		.radio_addr     = ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_DVB,
+			.vmux   = 0,
+		} },
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_TBS_8910] = {
+		.name           = "TBS 8910 DVB-S",
+		.tuner_type     = UNSET,
+		.radio_type     = UNSET,
+		.tuner_addr     = ADDR_UNSET,
+		.radio_addr     = ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_DVB,
+			.vmux   = 0,
+		} },
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_TBS_8920] = {
+		.name           = "TBS 8920 DVB-S/S2",
+		.tuner_type     = UNSET,
+		.radio_type     = UNSET,
+		.tuner_addr     = ADDR_UNSET,
+		.radio_addr     = ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_DVB,
+			.vmux   = 0,
+			.gpio0  = 0x8080,
+		} },
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_PROF_6200] = {
+		.name           = "Prof 6200 DVB-S",
+		.tuner_type     = UNSET,
+		.radio_type     = UNSET,
+		.tuner_addr     = ADDR_UNSET,
+		.radio_addr     = ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_DVB,
+			.vmux   = 0,
+		} },
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_PROF_7300] = {
+		.name           = "PROF 7300 DVB-S/S2",
+		.tuner_type     = UNSET,
+		.radio_type     = UNSET,
+		.tuner_addr     = ADDR_UNSET,
+		.radio_addr     = ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_DVB,
+			.vmux   = 0,
+		} },
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_SATTRADE_ST4200] = {
+		.name           = "SATTRADE ST4200 DVB-S/S2",
+		.tuner_type     = UNSET,
+		.radio_type     = UNSET,
+		.tuner_addr     = ADDR_UNSET,
+		.radio_addr     = ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_DVB,
+			.vmux   = 0,
+		} },
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_TERRATEC_CINERGY_HT_PCI_MKII] = {
+		.name           = "Terratec Cinergy HT PCI MKII",
+		.tuner_type     = TUNER_XC2028,
+		.tuner_addr     = 0x61,
+		.radio_type     = UNSET,
+		.radio_addr     = ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0x004ff,
+			.gpio1  = 0x010ff,
+			.gpio2  = 0x00001,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0x004fb,
+			.gpio1  = 0x010ef,
+			.audioroute = 1,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0x004fb,
+			.gpio1  = 0x010ef,
+			.audioroute = 1,
+		} },
+		.radio = {
+			.type   = CX88_RADIO,
+			.gpio0  = 0x004ff,
+			.gpio1  = 0x010ff,
+			.gpio2  = 0x0ff,
+		},
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_HAUPPAUGE_IRONLY] = {
+		.name           = "Hauppauge WinTV-IR Only",
+		.tuner_type     = UNSET,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+	},
+	[CX88_BOARD_WINFAST_DTV1800H] = {
+		.name           = "Leadtek WinFast DTV1800 Hybrid",
+		.tuner_type     = TUNER_XC2028,
+		.radio_type     = UNSET,
+		.tuner_addr     = 0x61,
+		.radio_addr     = ADDR_UNSET,
+		/*
+		 * GPIO setting
+		 *
+		 *  2: mute (0=off,1=on)
+		 * 12: tuner reset pin
+		 * 13: audio source (0=tuner audio,1=line in)
+		 * 14: FM (0=on,1=off ???)
+		 */
+		.input          = { {
+			.type   = CX88_VMUX_TELEVISION,
+			.vmux   = 0,
+			.gpio0  = 0x0400,       /* pin 2 = 0 */
+			.gpio1  = 0x6040,       /* pin 13 = 0, pin 14 = 1 */
+			.gpio2  = 0x0000,
+		}, {
+			.type   = CX88_VMUX_COMPOSITE1,
+			.vmux   = 1,
+			.gpio0  = 0x0400,       /* pin 2 = 0 */
+			.gpio1  = 0x6060,       /* pin 13 = 1, pin 14 = 1 */
+			.gpio2  = 0x0000,
+		}, {
+			.type   = CX88_VMUX_SVIDEO,
+			.vmux   = 2,
+			.gpio0  = 0x0400,       /* pin 2 = 0 */
+			.gpio1  = 0x6060,       /* pin 13 = 1, pin 14 = 1 */
+			.gpio2  = 0x0000,
+		} },
+		.radio = {
+			.type   = CX88_RADIO,
+			.gpio0  = 0x0400,       /* pin 2 = 0 */
+			.gpio1  = 0x6000,       /* pin 13 = 0, pin 14 = 0 */
+			.gpio2  = 0x0000,
+		},
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_WINFAST_DTV1800H_XC4000] = {
+		.name		= "Leadtek WinFast DTV1800 H (XC4000)",
+		.tuner_type	= TUNER_XC4000,
+		.radio_type	= UNSET,
+		.tuner_addr	= 0x61,
+		.radio_addr	= ADDR_UNSET,
+		/*
+		 * GPIO setting
+		 *
+		 *  2: mute (0=off,1=on)
+		 * 12: tuner reset pin
+		 * 13: audio source (0=tuner audio,1=line in)
+		 * 14: FM (0=on,1=off ???)
+		 */
+		.input		= { {
+			.type	= CX88_VMUX_TELEVISION,
+			.vmux	= 0,
+			.gpio0	= 0x0400,	/* pin 2 = 0 */
+			.gpio1	= 0x6040,	/* pin 13 = 0, pin 14 = 1 */
+			.gpio2	= 0x0000,
+		}, {
+			.type	= CX88_VMUX_COMPOSITE1,
+			.vmux	= 1,
+			.gpio0	= 0x0400,	/* pin 2 = 0 */
+			.gpio1	= 0x6060,	/* pin 13 = 1, pin 14 = 1 */
+			.gpio2	= 0x0000,
+		}, {
+			.type	= CX88_VMUX_SVIDEO,
+			.vmux	= 2,
+			.gpio0	= 0x0400,	/* pin 2 = 0 */
+			.gpio1	= 0x6060,	/* pin 13 = 1, pin 14 = 1 */
+			.gpio2	= 0x0000,
+		} },
+		.radio = {
+			.type	= CX88_RADIO,
+			.gpio0	= 0x0400,	/* pin 2 = 0 */
+			.gpio1	= 0x6000,	/* pin 13 = 0, pin 14 = 0 */
+			.gpio2	= 0x0000,
+		},
+		.mpeg		= CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_WINFAST_DTV2000H_PLUS] = {
+		.name		= "Leadtek WinFast DTV2000 H PLUS",
+		.tuner_type	= TUNER_XC4000,
+		.radio_type	= UNSET,
+		.tuner_addr	= 0x61,
+		.radio_addr	= ADDR_UNSET,
+		/*
+		 * GPIO
+		 *   2: 1: mute audio
+		 *  12: 0: reset XC4000
+		 *  13: 1: audio input is line in (0: tuner)
+		 *  14: 0: FM radio
+		 *  16: 0: RF input is cable
+		 */
+		.input		= { {
+			.type	= CX88_VMUX_TELEVISION,
+			.vmux	= 0,
+			.gpio0	= 0x0403,
+			.gpio1	= 0xF0D7,
+			.gpio2	= 0x0101,
+			.gpio3	= 0x0000,
+		}, {
+			.type	= CX88_VMUX_CABLE,
+			.vmux	= 0,
+			.gpio0	= 0x0403,
+			.gpio1	= 0xF0D7,
+			.gpio2	= 0x0100,
+			.gpio3	= 0x0000,
+		}, {
+			.type	= CX88_VMUX_COMPOSITE1,
+			.vmux	= 1,
+			.gpio0	= 0x0403,	/* was 0x0407 */
+			.gpio1	= 0xF0F7,
+			.gpio2	= 0x0101,
+			.gpio3	= 0x0000,
+		}, {
+			.type	= CX88_VMUX_SVIDEO,
+			.vmux	= 2,
+			.gpio0	= 0x0403,	/* was 0x0407 */
+			.gpio1	= 0xF0F7,
+			.gpio2	= 0x0101,
+			.gpio3	= 0x0000,
+		} },
+		.radio = {
+			.type	= CX88_RADIO,
+			.gpio0	= 0x0403,
+			.gpio1	= 0xF097,
+			.gpio2	= 0x0100,
+			.gpio3	= 0x0000,
+		},
+		.mpeg		= CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_PROF_7301] = {
+		.name           = "Prof 7301 DVB-S/S2",
+		.tuner_type     = UNSET,
+		.radio_type     = UNSET,
+		.tuner_addr     = ADDR_UNSET,
+		.radio_addr     = ADDR_UNSET,
+		.input          = { {
+			.type   = CX88_VMUX_DVB,
+			.vmux   = 0,
+		} },
+		.mpeg           = CX88_MPEG_DVB,
+	},
+	[CX88_BOARD_TWINHAN_VP1027_DVBS] = {
+		.name		= "Twinhan VP-1027 DVB-S",
+		.tuner_type     = UNSET,
+		.radio_type     = UNSET,
+		.tuner_addr     = ADDR_UNSET,
+		.radio_addr     = ADDR_UNSET,
+		.input          = { {
+		       .type   = CX88_VMUX_DVB,
+		       .vmux   = 0,
+		} },
+		.mpeg           = CX88_MPEG_DVB,
+	},
+};
+
+/* ------------------------------------------------------------------ */
+/* PCI subsystem IDs                                                  */
+
+static const struct cx88_subid cx88_subids[] = {
+	{
+		.subvendor = 0x0070,
+		.subdevice = 0x3400,
+		.card      = CX88_BOARD_HAUPPAUGE,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x3401,
+		.card      = CX88_BOARD_HAUPPAUGE,
+	}, {
+		.subvendor = 0x14c7,
+		.subdevice = 0x0106,
+		.card      = CX88_BOARD_GDI,
+	}, {
+		.subvendor = 0x14c7,
+		.subdevice = 0x0107, /* with mpeg encoder */
+		.card      = CX88_BOARD_GDI,
+	}, {
+		.subvendor = PCI_VENDOR_ID_ATI,
+		.subdevice = 0x00f8,
+		.card      = CX88_BOARD_ATI_WONDER_PRO,
+	}, {
+		.subvendor = PCI_VENDOR_ID_ATI,
+		.subdevice = 0x00f9,
+		.card      = CX88_BOARD_ATI_WONDER_PRO,
+	}, {
+		.subvendor = 0x107d,
+		.subdevice = 0x6611,
+		.card      = CX88_BOARD_WINFAST2000XP_EXPERT,
+	}, {
+		.subvendor = 0x107d,
+		.subdevice = 0x6613,	/* NTSC */
+		.card      = CX88_BOARD_WINFAST2000XP_EXPERT,
+	}, {
+		.subvendor = 0x107d,
+		.subdevice = 0x6620,
+		.card      = CX88_BOARD_WINFAST_DV2000,
+	}, {
+		.subvendor = 0x107d,
+		.subdevice = 0x663b,
+		.card      = CX88_BOARD_LEADTEK_PVR2000,
+	}, {
+		.subvendor = 0x107d,
+		.subdevice = 0x663c,
+		.card      = CX88_BOARD_LEADTEK_PVR2000,
+	}, {
+		.subvendor = 0x1461,
+		.subdevice = 0x000b,
+		.card      = CX88_BOARD_AVERTV_STUDIO_303,
+	}, {
+		.subvendor = 0x1462,
+		.subdevice = 0x8606,
+		.card      = CX88_BOARD_MSI_TVANYWHERE_MASTER,
+	}, {
+		.subvendor = 0x10fc,
+		.subdevice = 0xd003,
+		.card      = CX88_BOARD_IODATA_GVVCP3PCI,
+	}, {
+		.subvendor = 0x1043,
+		.subdevice = 0x4823,  /* with mpeg encoder */
+		.card      = CX88_BOARD_ASUS_PVR_416,
+	}, {
+		.subvendor = 0x17de,
+		.subdevice = 0x08a6,
+		.card      = CX88_BOARD_KWORLD_DVB_T,
+	}, {
+		.subvendor = 0x18ac,
+		.subdevice = 0xd810,
+		.card      = CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q,
+	}, {
+		.subvendor = 0x18ac,
+		.subdevice = 0xd820,
+		.card      = CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T,
+	}, {
+		.subvendor = 0x18ac,
+		.subdevice = 0xdb00,
+		.card      = CX88_BOARD_DVICO_FUSIONHDTV_DVB_T1,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x9002,
+		.card      = CX88_BOARD_HAUPPAUGE_DVB_T1,
+	}, {
+		.subvendor = 0x14f1,
+		.subdevice = 0x0187,
+		.card      = CX88_BOARD_CONEXANT_DVB_T1,
+	}, {
+		.subvendor = 0x1540,
+		.subdevice = 0x2580,
+		.card      = CX88_BOARD_PROVIDEO_PV259,
+	}, {
+		.subvendor = 0x18ac,
+		.subdevice = 0xdb10,
+		.card      = CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS,
+	}, {
+		.subvendor = 0x1554,
+		.subdevice = 0x4811,
+		.card      = CX88_BOARD_PIXELVIEW,
+	}, {
+		.subvendor = 0x7063,
+		.subdevice = 0x3000, /* HD-3000 card */
+		.card      = CX88_BOARD_PCHDTV_HD3000,
+	}, {
+		.subvendor = 0x17de,
+		.subdevice = 0xa8a6,
+		.card      = CX88_BOARD_DNTV_LIVE_DVB_T,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x2801,
+		.card      = CX88_BOARD_HAUPPAUGE_ROSLYN,
+	}, {
+		.subvendor = 0x14f1,
+		.subdevice = 0x0342,
+		.card      = CX88_BOARD_DIGITALLOGIC_MEC,
+	}, {
+		.subvendor = 0x10fc,
+		.subdevice = 0xd035,
+		.card      = CX88_BOARD_IODATA_GVBCTV7E,
+	}, {
+		.subvendor = 0x1421,
+		.subdevice = 0x0334,
+		.card      = CX88_BOARD_ADSTECH_DVB_T_PCI,
+	}, {
+		.subvendor = 0x153b,
+		.subdevice = 0x1166,
+		.card      = CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1,
+	}, {
+		.subvendor = 0x18ac,
+		.subdevice = 0xd500,
+		.card      = CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD,
+	}, {
+		.subvendor = 0x1461,
+		.subdevice = 0x8011,
+		.card      = CX88_BOARD_AVERMEDIA_ULTRATV_MC_550,
+	}, {
+		.subvendor = PCI_VENDOR_ID_ATI,
+		.subdevice = 0xa101,
+		.card      = CX88_BOARD_ATI_HDTVWONDER,
+	}, {
+		.subvendor = 0x107d,
+		.subdevice = 0x665f,
+		.card      = CX88_BOARD_WINFAST_DTV1000,
+	}, {
+		.subvendor = 0x1461,
+		.subdevice = 0x000a,
+		.card      = CX88_BOARD_AVERTV_303,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x9200,
+		.card      = CX88_BOARD_HAUPPAUGE_NOVASE2_S1,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x9201,
+		.card      = CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x9202,
+		.card      = CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1,
+	}, {
+		.subvendor = 0x17de,
+		.subdevice = 0x08b2,
+		.card      = CX88_BOARD_KWORLD_DVBS_100,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x9400,
+		.card      = CX88_BOARD_HAUPPAUGE_HVR1100,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x9402,
+		.card      = CX88_BOARD_HAUPPAUGE_HVR1100,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x9800,
+		.card      = CX88_BOARD_HAUPPAUGE_HVR1100LP,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x9802,
+		.card      = CX88_BOARD_HAUPPAUGE_HVR1100LP,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x9001,
+		.card      = CX88_BOARD_HAUPPAUGE_DVB_T1,
+	}, {
+		.subvendor = 0x1822,
+		.subdevice = 0x0025,
+		.card      = CX88_BOARD_DNTV_LIVE_DVB_T_PRO,
+	}, {
+		.subvendor = 0x17de,
+		.subdevice = 0x08a1,
+		.card      = CX88_BOARD_KWORLD_DVB_T_CX22702,
+	}, {
+		.subvendor = 0x18ac,
+		.subdevice = 0xdb50,
+		.card      = CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL,
+	}, {
+		.subvendor = 0x18ac,
+		.subdevice = 0xdb54,
+		.card      = CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL,
+		/* Re-branded DViCO: DigitalNow DVB-T Dual */
+	}, {
+		.subvendor = 0x18ac,
+		.subdevice = 0xdb11,
+		.card      = CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS,
+		/* Re-branded DViCO: UltraView DVB-T Plus */
+	}, {
+		.subvendor = 0x18ac,
+		.subdevice = 0xdb30,
+		.card      = CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO,
+	}, {
+		.subvendor = 0x17de,
+		.subdevice = 0x0840,
+		.card      = CX88_BOARD_KWORLD_HARDWARE_MPEG_TV_XPERT,
+	}, {
+		.subvendor = 0x1421,
+		.subdevice = 0x0305,
+		.card      = CX88_BOARD_KWORLD_HARDWARE_MPEG_TV_XPERT,
+	}, {
+		.subvendor = 0x18ac,
+		.subdevice = 0xdb40,
+		.card      = CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_HYBRID,
+	}, {
+		.subvendor = 0x18ac,
+		.subdevice = 0xdb44,
+		.card      = CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_HYBRID,
+	}, {
+		.subvendor = 0x7063,
+		.subdevice = 0x5500,
+		.card      = CX88_BOARD_PCHDTV_HD5500,
+	}, {
+		.subvendor = 0x17de,
+		.subdevice = 0x0841,
+		.card      = CX88_BOARD_KWORLD_MCE200_DELUXE,
+	}, {
+		.subvendor = 0x1822,
+		.subdevice = 0x0019,
+		.card      = CX88_BOARD_DNTV_LIVE_DVB_T_PRO,
+	}, {
+		.subvendor = 0x1554,
+		.subdevice = 0x4813,
+		.card      = CX88_BOARD_PIXELVIEW_PLAYTV_P7000,
+	}, {
+		.subvendor = 0x14f1,
+		.subdevice = 0x0842,
+		.card      = CX88_BOARD_NPGTECH_REALTV_TOP10FM,
+	}, {
+		.subvendor = 0x107d,
+		.subdevice = 0x665e,
+		.card      = CX88_BOARD_WINFAST_DTV2000H,
+	}, {
+		.subvendor = 0x107d,
+		.subdevice = 0x6f2b,
+		.card      = CX88_BOARD_WINFAST_DTV2000H_J,
+	}, {
+		.subvendor = 0x18ac,
+		.subdevice = 0xd800, /* FusionHDTV 3 Gold (original revision) */
+		.card      = CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q,
+	}, {
+		.subvendor = 0x14f1,
+		.subdevice = 0x0084,
+		.card      = CX88_BOARD_GENIATECH_DVBS,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x1404,
+		.card      = CX88_BOARD_HAUPPAUGE_HVR3000,
+	}, {
+		.subvendor = 0x18ac,
+		.subdevice = 0xdc00,
+		.card      = CX88_BOARD_SAMSUNG_SMT_7020,
+	}, {
+		.subvendor = 0x18ac,
+		.subdevice = 0xdccd,
+		.card      = CX88_BOARD_SAMSUNG_SMT_7020,
+	}, {
+		.subvendor = 0x1461,
+		.subdevice = 0xc111, /* AverMedia M150-D */
+		/* This board is known to work with the ASUS PVR416 config */
+		.card      = CX88_BOARD_ASUS_PVR_416,
+	}, {
+		.subvendor = 0xc180,
+		.subdevice = 0xc980,
+		.card      = CX88_BOARD_TE_DTV_250_OEM_SWANN,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x9600,
+		.card      = CX88_BOARD_HAUPPAUGE_HVR1300,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x9601,
+		.card      = CX88_BOARD_HAUPPAUGE_HVR1300,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x9602,
+		.card      = CX88_BOARD_HAUPPAUGE_HVR1300,
+	}, {
+		.subvendor = 0x107d,
+		.subdevice = 0x6632,
+		.card      = CX88_BOARD_LEADTEK_PVR2000,
+	}, {
+		.subvendor = 0x12ab,
+		.subdevice = 0x2300, /* Club3D Zap TV2100 */
+		.card      = CX88_BOARD_KWORLD_DVB_T_CX22702,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x9000,
+		.card      = CX88_BOARD_HAUPPAUGE_DVB_T1,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x1400,
+		.card      = CX88_BOARD_HAUPPAUGE_HVR3000,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x1401,
+		.card      = CX88_BOARD_HAUPPAUGE_HVR3000,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x1402,
+		.card      = CX88_BOARD_HAUPPAUGE_HVR3000,
+	}, {
+		.subvendor = 0x1421,
+		.subdevice = 0x0341, /* ADS Tech InstantTV DVB-S */
+		.card      = CX88_BOARD_KWORLD_DVBS_100,
+	}, {
+		.subvendor = 0x1421,
+		.subdevice = 0x0390,
+		.card      = CX88_BOARD_ADSTECH_PTV_390,
+	}, {
+		.subvendor = 0x11bd,
+		.subdevice = 0x0051,
+		.card      = CX88_BOARD_PINNACLE_PCTV_HD_800i,
+	}, {
+		.subvendor = 0x18ac,
+		.subdevice = 0xd530,
+		.card      = CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO,
+	}, {
+		.subvendor = 0x12ab,
+		.subdevice = 0x1788,
+		.card      = CX88_BOARD_PINNACLE_HYBRID_PCTV,
+	}, {
+		.subvendor = 0x14f1,
+		.subdevice = 0xea3d,
+		.card      = CX88_BOARD_POWERCOLOR_REAL_ANGEL,
+	}, {
+		.subvendor = 0x107d,
+		.subdevice = 0x6f18,
+		.card      = CX88_BOARD_WINFAST_TV2000_XP_GLOBAL,
+	}, {
+		/* Also NotOnlyTV LV3H (version 1.11 is silkscreened on the board) */
+		.subvendor = 0x14f1,
+		.subdevice = 0x8852,
+		.card      = CX88_BOARD_GENIATECH_X8000_MT,
+	}, {
+		.subvendor = 0x18ac,
+		.subdevice = 0xd610,
+		.card      = CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD,
+	}, {
+		.subvendor = 0x1554,
+		.subdevice = 0x4935,
+		.card      = CX88_BOARD_PROLINK_PV_8000GT,
+	}, {
+		.subvendor = 0x1554,
+		.subdevice = 0x4976,
+		.card      = CX88_BOARD_PROLINK_PV_GLOBAL_XTREME,
+	}, {
+		.subvendor = 0x17de,
+		.subdevice = 0x08c1,
+		.card      = CX88_BOARD_KWORLD_ATSC_120,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x6900,
+		.card      = CX88_BOARD_HAUPPAUGE_HVR4000,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x6904,
+		.card      = CX88_BOARD_HAUPPAUGE_HVR4000,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x6902,
+		.card      = CX88_BOARD_HAUPPAUGE_HVR4000,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x6905,
+		.card      = CX88_BOARD_HAUPPAUGE_HVR4000LITE,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x6906,
+		.card      = CX88_BOARD_HAUPPAUGE_HVR4000LITE,
+	}, {
+		.subvendor = 0xd420,
+		.subdevice = 0x9022,
+		.card      = CX88_BOARD_TEVII_S420,
+	}, {
+		.subvendor = 0xd460,
+		.subdevice = 0x9022,
+		.card      = CX88_BOARD_TEVII_S460,
+	}, {
+		.subvendor = 0xd464,
+		.subdevice = 0x9022,
+		.card      = CX88_BOARD_TEVII_S464,
+	}, {
+		.subvendor = 0xA044,
+		.subdevice = 0x2011,
+		.card      = CX88_BOARD_OMICOM_SS4_PCI,
+	}, {
+		.subvendor = 0x8910,
+		.subdevice = 0x8888,
+		.card      = CX88_BOARD_TBS_8910,
+	}, {
+		.subvendor = 0x8920,
+		.subdevice = 0x8888,
+		.card      = CX88_BOARD_TBS_8920,
+	}, {
+		.subvendor = 0xb022,
+		.subdevice = 0x3022,
+		.card      = CX88_BOARD_PROF_6200,
+	}, {
+		.subvendor = 0xB033,
+		.subdevice = 0x3033,
+		.card      = CX88_BOARD_PROF_7300,
+	}, {
+		.subvendor = 0xb200,
+		.subdevice = 0x4200,
+		.card      = CX88_BOARD_SATTRADE_ST4200,
+	}, {
+		.subvendor = 0x153b,
+		.subdevice = 0x1177,
+		.card      = CX88_BOARD_TERRATEC_CINERGY_HT_PCI_MKII,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x9290,
+		.card      = CX88_BOARD_HAUPPAUGE_IRONLY,
+	}, {
+		.subvendor = 0x107d,
+		.subdevice = 0x6654,
+		.card      = CX88_BOARD_WINFAST_DTV1800H,
+	}, {
+		/* WinFast DTV1800 H with XC4000 tuner */
+		.subvendor = 0x107d,
+		.subdevice = 0x6f38,
+		.card      = CX88_BOARD_WINFAST_DTV1800H_XC4000,
+	}, {
+		.subvendor = 0x107d,
+		.subdevice = 0x6f42,
+		.card      = CX88_BOARD_WINFAST_DTV2000H_PLUS,
+	}, {
+		/* PVR2000 PAL Model [107d:6630] */
+		.subvendor = 0x107d,
+		.subdevice = 0x6630,
+		.card      = CX88_BOARD_LEADTEK_PVR2000,
+	}, {
+		/* PVR2000 PAL Model [107d:6638] */
+		.subvendor = 0x107d,
+		.subdevice = 0x6638,
+		.card      = CX88_BOARD_LEADTEK_PVR2000,
+	}, {
+		/* PVR2000 NTSC Model [107d:6631] */
+		.subvendor = 0x107d,
+		.subdevice = 0x6631,
+		.card      = CX88_BOARD_LEADTEK_PVR2000,
+	}, {
+		/* PVR2000 NTSC Model [107d:6637] */
+		.subvendor = 0x107d,
+		.subdevice = 0x6637,
+		.card      = CX88_BOARD_LEADTEK_PVR2000,
+	}, {
+		/* PVR2000 NTSC Model [107d:663d] */
+		.subvendor = 0x107d,
+		.subdevice = 0x663d,
+		.card      = CX88_BOARD_LEADTEK_PVR2000,
+	}, {
+		/* DV2000 NTSC Model [107d:6621] */
+		.subvendor = 0x107d,
+		.subdevice = 0x6621,
+		.card      = CX88_BOARD_WINFAST_DV2000,
+	}, {
+		/* TV2000 XP Global [107d:6618]  */
+		.subvendor = 0x107d,
+		.subdevice = 0x6618,
+		.card      = CX88_BOARD_WINFAST_TV2000_XP_GLOBAL,
+	}, {
+		/* TV2000 XP Global [107d:6618] */
+		.subvendor = 0x107d,
+		.subdevice = 0x6619,
+		.card      = CX88_BOARD_WINFAST_TV2000_XP_GLOBAL,
+	}, {
+		/* WinFast TV2000 XP Global with XC4000 tuner */
+		.subvendor = 0x107d,
+		.subdevice = 0x6f36,
+		.card      = CX88_BOARD_WINFAST_TV2000_XP_GLOBAL_6F36,
+	}, {
+		/* WinFast TV2000 XP Global with XC4000 tuner and different GPIOs */
+		.subvendor = 0x107d,
+		.subdevice = 0x6f43,
+		.card      = CX88_BOARD_WINFAST_TV2000_XP_GLOBAL_6F43,
+	}, {
+		.subvendor = 0xb034,
+		.subdevice = 0x3034,
+		.card      = CX88_BOARD_PROF_7301,
+	}, {
+		.subvendor = 0x1822,
+		.subdevice = 0x0023,
+		.card      = CX88_BOARD_TWINHAN_VP1027_DVBS,
+	},
+};
+
+/*
+ * some leadtek specific stuff
+ */
+static void leadtek_eeprom(struct cx88_core *core, u8 *eeprom_data)
+{
+	if (eeprom_data[4] != 0x7d ||
+	    eeprom_data[5] != 0x10 ||
+	    eeprom_data[7] != 0x66) {
+		pr_warn("Leadtek eeprom invalid.\n");
+		return;
+	}
+
+	/* Terry Wu <terrywu2009@gmail.com> */
+	switch (eeprom_data[6]) {
+	case 0x13: /* SSID 6613 for TV2000 XP Expert NTSC Model */
+	case 0x21: /* SSID 6621 for DV2000 NTSC Model */
+	case 0x31: /* SSID 6631 for PVR2000 NTSC Model */
+	case 0x37: /* SSID 6637 for PVR2000 NTSC Model */
+	case 0x3d: /* SSID 6637 for PVR2000 NTSC Model */
+		core->board.tuner_type = TUNER_PHILIPS_FM1236_MK3;
+		break;
+	default:
+		core->board.tuner_type = TUNER_PHILIPS_FM1216ME_MK3;
+		break;
+	}
+
+	pr_info("Leadtek Winfast 2000XP Expert config: tuner=%d, eeprom[0]=0x%02x\n",
+		core->board.tuner_type, eeprom_data[0]);
+}
+
+static void hauppauge_eeprom(struct cx88_core *core, u8 *eeprom_data)
+{
+	struct tveeprom tv;
+
+	tveeprom_hauppauge_analog(&tv, eeprom_data);
+	core->board.tuner_type = tv.tuner_type;
+	core->tuner_formats = tv.tuner_formats;
+	core->board.radio.type = tv.has_radio ? CX88_RADIO : 0;
+	core->model = tv.model;
+
+	/* Make sure we support the board model */
+	switch (tv.model) {
+	case 14009: /* WinTV-HVR3000 (Retail, IR, b/panel video, 3.5mm audio in) */
+	case 14019: /* WinTV-HVR3000 (Retail, IR Blaster, b/panel video, 3.5mm audio in) */
+	case 14029: /* WinTV-HVR3000 (Retail, IR, b/panel video, 3.5mm audio in - 880 bridge) */
+	case 14109: /* WinTV-HVR3000 (Retail, IR, b/panel video, 3.5mm audio in - low profile) */
+	case 14129: /* WinTV-HVR3000 (Retail, IR, b/panel video, 3.5mm audio in - 880 bridge - LP) */
+	case 14559: /* WinTV-HVR3000 (OEM, no IR, b/panel video, 3.5mm audio in) */
+	case 14569: /* WinTV-HVR3000 (OEM, no IR, no back panel video) */
+	case 14659: /* WinTV-HVR3000 (OEM, no IR, b/panel video, RCA audio in - Low profile) */
+	case 14669: /* WinTV-HVR3000 (OEM, no IR, no b/panel video - Low profile) */
+	case 28552: /* WinTV-PVR 'Roslyn' (No IR) */
+	case 34519: /* WinTV-PCI-FM */
+	case 69009:
+		/* WinTV-HVR4000 (DVBS/S2/T, Video and IR, back panel inputs) */
+	case 69100: /* WinTV-HVR4000LITE (DVBS/S2, IR) */
+	case 69500: /* WinTV-HVR4000LITE (DVBS/S2, No IR) */
+	case 69559:
+		/* WinTV-HVR4000 (DVBS/S2/T, Video no IR, back panel inputs) */
+	case 69569: /* WinTV-HVR4000 (DVBS/S2/T, Video no IR) */
+	case 90002: /* Nova-T-PCI (9002) */
+	case 92001: /* Nova-S-Plus (Video and IR) */
+	case 92002: /* Nova-S-Plus (Video and IR) */
+	case 90003: /* Nova-T-PCI (9002 No RF out) */
+	case 90500: /* Nova-T-PCI (oem) */
+	case 90501: /* Nova-T-PCI (oem/IR) */
+	case 92000: /* Nova-SE2 (OEM, No Video or IR) */
+	case 92900: /* WinTV-IROnly (No analog or digital Video inputs) */
+	case 94009: /* WinTV-HVR1100 (Video and IR Retail) */
+	case 94501: /* WinTV-HVR1100 (Video and IR OEM) */
+	case 96009: /* WinTV-HVR1300 (PAL Video, MPEG Video and IR RX) */
+	case 96019: /* WinTV-HVR1300 (PAL Video, MPEG Video and IR RX/TX) */
+	case 96559: /* WinTV-HVR1300 (PAL Video, MPEG Video no IR) */
+	case 96569: /* WinTV-HVR1300 () */
+	case 96659: /* WinTV-HVR1300 () */
+	case 98559: /* WinTV-HVR1100LP (Video no IR, Retail - Low Profile) */
+		/* known */
+		break;
+	case CX88_BOARD_SAMSUNG_SMT_7020:
+		cx_set(MO_GP0_IO, 0x008989FF);
+		break;
+	default:
+		pr_warn("warning: unknown hauppauge model #%d\n", tv.model);
+		break;
+	}
+
+	pr_info("hauppauge eeprom: model=%d\n", tv.model);
+}
+
+/*
+ * some GDI (was: Modular Technology) specific stuff
+ */
+
+static const struct {
+	int  id;
+	int  fm;
+	const char *name;
+} gdi_tuner[] = {
+	[0x01] = { .id   = UNSET,
+		   .name = "NTSC_M" },
+	[0x02] = { .id   = UNSET,
+		   .name = "PAL_B" },
+	[0x03] = { .id   = UNSET,
+		   .name = "PAL_I" },
+	[0x04] = { .id   = UNSET,
+		   .name = "PAL_D" },
+	[0x05] = { .id   = UNSET,
+		   .name = "SECAM" },
+
+	[0x10] = { .id   = UNSET,
+		   .fm   = 1,
+		   .name = "TEMIC_4049" },
+	[0x11] = { .id   = TUNER_TEMIC_4136FY5,
+		   .name = "TEMIC_4136" },
+	[0x12] = { .id   = UNSET,
+		   .name = "TEMIC_4146" },
+
+	[0x20] = { .id   = TUNER_PHILIPS_FQ1216ME,
+		   .fm   = 1,
+		   .name = "PHILIPS_FQ1216_MK3" },
+	[0x21] = { .id   = UNSET, .fm = 1,
+		   .name = "PHILIPS_FQ1236_MK3" },
+	[0x22] = { .id   = UNSET,
+		   .name = "PHILIPS_FI1236_MK3" },
+	[0x23] = { .id   = UNSET,
+		   .name = "PHILIPS_FI1216_MK3" },
+};
+
+static void gdi_eeprom(struct cx88_core *core, u8 *eeprom_data)
+{
+	const char *name = (eeprom_data[0x0d] < ARRAY_SIZE(gdi_tuner))
+		? gdi_tuner[eeprom_data[0x0d]].name : NULL;
+
+	pr_info("GDI: tuner=%s\n", name ? name : "unknown");
+	if (!name)
+		return;
+	core->board.tuner_type = gdi_tuner[eeprom_data[0x0d]].id;
+	core->board.radio.type = gdi_tuner[eeprom_data[0x0d]].fm ?
+		CX88_RADIO : 0;
+}
+
+/*
+ * some Divco specific stuff
+ */
+static int cx88_dvico_xc2028_callback(struct cx88_core *core,
+				      int command, int arg)
+{
+	switch (command) {
+	case XC2028_TUNER_RESET:
+		switch (core->boardnr) {
+		case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
+			/* GPIO-4 xc3028 tuner */
+
+			cx_set(MO_GP0_IO, 0x00001000);
+			cx_clear(MO_GP0_IO, 0x00000010);
+			msleep(100);
+			cx_set(MO_GP0_IO, 0x00000010);
+			msleep(100);
+			break;
+		default:
+			cx_write(MO_GP0_IO, 0x101000);
+			mdelay(5);
+			cx_set(MO_GP0_IO, 0x101010);
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/*
+ * some Geniatech specific stuff
+ */
+
+static int cx88_xc3028_geniatech_tuner_callback(struct cx88_core *core,
+						int command, int mode)
+{
+	switch (command) {
+	case XC2028_TUNER_RESET:
+		switch (INPUT(core->input).type) {
+		case CX88_RADIO:
+			break;
+		case CX88_VMUX_DVB:
+			cx_write(MO_GP1_IO, 0x030302);
+			mdelay(50);
+			break;
+		default:
+			cx_write(MO_GP1_IO, 0x030301);
+			mdelay(50);
+		}
+		cx_write(MO_GP1_IO, 0x101010);
+		mdelay(50);
+		cx_write(MO_GP1_IO, 0x101000);
+		mdelay(50);
+		cx_write(MO_GP1_IO, 0x101010);
+		mdelay(50);
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static int cx88_xc3028_winfast1800h_callback(struct cx88_core *core,
+					     int command, int arg)
+{
+	switch (command) {
+	case XC2028_TUNER_RESET:
+		/* GPIO 12 (xc3028 tuner reset) */
+		cx_set(MO_GP1_IO, 0x1010);
+		mdelay(50);
+		cx_clear(MO_GP1_IO, 0x10);
+		mdelay(75);
+		cx_set(MO_GP1_IO, 0x10);
+		mdelay(75);
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static int cx88_xc4000_winfast2000h_plus_callback(struct cx88_core *core,
+						  int command, int arg)
+{
+	switch (command) {
+	case XC4000_TUNER_RESET:
+		/* GPIO 12 (xc4000 tuner reset) */
+		cx_set(MO_GP1_IO, 0x1010);
+		mdelay(50);
+		cx_clear(MO_GP1_IO, 0x10);
+		mdelay(75);
+		cx_set(MO_GP1_IO, 0x10);
+		mdelay(75);
+		return 0;
+	}
+	return -EINVAL;
+}
+
+/*
+ * some Divco specific stuff
+ */
+static int cx88_pv_8000gt_callback(struct cx88_core *core,
+				   int command, int arg)
+{
+	switch (command) {
+	case XC2028_TUNER_RESET:
+		cx_write(MO_GP2_IO, 0xcf7);
+		mdelay(50);
+		cx_write(MO_GP2_IO, 0xef5);
+		mdelay(50);
+		cx_write(MO_GP2_IO, 0xcf7);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/*
+ * some DViCO specific stuff
+ */
+
+static void dvico_fusionhdtv_hybrid_init(struct cx88_core *core)
+{
+	struct i2c_msg msg = { .addr = 0x45, .flags = 0 };
+	int i, err;
+	static u8 init_bufs[13][5] = {
+		{ 0x10, 0x00, 0x20, 0x01, 0x03 },
+		{ 0x10, 0x10, 0x01, 0x00, 0x21 },
+		{ 0x10, 0x10, 0x10, 0x00, 0xCA },
+		{ 0x10, 0x10, 0x12, 0x00, 0x08 },
+		{ 0x10, 0x10, 0x13, 0x00, 0x0A },
+		{ 0x10, 0x10, 0x16, 0x01, 0xC0 },
+		{ 0x10, 0x10, 0x22, 0x01, 0x3D },
+		{ 0x10, 0x10, 0x73, 0x01, 0x2E },
+		{ 0x10, 0x10, 0x72, 0x00, 0xC5 },
+		{ 0x10, 0x10, 0x71, 0x01, 0x97 },
+		{ 0x10, 0x10, 0x70, 0x00, 0x0F },
+		{ 0x10, 0x10, 0xB0, 0x00, 0x01 },
+		{ 0x03, 0x0C },
+	};
+
+	for (i = 0; i < ARRAY_SIZE(init_bufs); i++) {
+		msg.buf = init_bufs[i];
+		msg.len = (i != 12 ? 5 : 2);
+		err = i2c_transfer(&core->i2c_adap, &msg, 1);
+		if (err != 1) {
+			pr_warn("dvico_fusionhdtv_hybrid_init buf %d failed (err = %d)!\n",
+				i, err);
+			return;
+		}
+	}
+}
+
+static int cx88_xc2028_tuner_callback(struct cx88_core *core,
+				      int command, int arg)
+{
+	/* Board-specific callbacks */
+	switch (core->boardnr) {
+	case CX88_BOARD_POWERCOLOR_REAL_ANGEL:
+	case CX88_BOARD_GENIATECH_X8000_MT:
+	case CX88_BOARD_KWORLD_ATSC_120:
+		return cx88_xc3028_geniatech_tuner_callback(core,
+							command, arg);
+	case CX88_BOARD_PROLINK_PV_8000GT:
+	case CX88_BOARD_PROLINK_PV_GLOBAL_XTREME:
+		return cx88_pv_8000gt_callback(core, command, arg);
+	case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO:
+	case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
+		return cx88_dvico_xc2028_callback(core, command, arg);
+	case CX88_BOARD_NOTONLYTV_LV3H:
+	case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL:
+	case CX88_BOARD_WINFAST_DTV1800H:
+		return cx88_xc3028_winfast1800h_callback(core, command, arg);
+	}
+
+	switch (command) {
+	case XC2028_TUNER_RESET:
+		switch (INPUT(core->input).type) {
+		case CX88_RADIO:
+			dprintk(1, "setting GPIO to radio!\n");
+			cx_write(MO_GP0_IO, 0x4ff);
+			mdelay(250);
+			cx_write(MO_GP2_IO, 0xff);
+			mdelay(250);
+			break;
+		case CX88_VMUX_DVB:	/* Digital TV*/
+		default:		/* Analog TV */
+			dprintk(1, "setting GPIO to TV!\n");
+			break;
+		}
+		cx_write(MO_GP1_IO, 0x101010);
+		mdelay(250);
+		cx_write(MO_GP1_IO, 0x101000);
+		mdelay(250);
+		cx_write(MO_GP1_IO, 0x101010);
+		mdelay(250);
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static int cx88_xc4000_tuner_callback(struct cx88_core *core,
+				      int command, int arg)
+{
+	/* Board-specific callbacks */
+	switch (core->boardnr) {
+	case CX88_BOARD_WINFAST_DTV1800H_XC4000:
+	case CX88_BOARD_WINFAST_DTV2000H_PLUS:
+	case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL_6F36:
+	case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL_6F43:
+		return cx88_xc4000_winfast2000h_plus_callback(core,
+							      command, arg);
+	}
+	return -EINVAL;
+}
+
+/*
+ * Tuner callback function. Currently only needed for the Pinnacle
+ * PCTV HD 800i with an xc5000 silicon tuner. This is used for both
+ * analog tuner attach (tuner-core.c) and dvb tuner attach (cx88-dvb.c)
+ */
+static int cx88_xc5000_tuner_callback(struct cx88_core *core,
+				      int command, int arg)
+{
+	switch (core->boardnr) {
+	case CX88_BOARD_PINNACLE_PCTV_HD_800i:
+		if (command == 0) { /* This is the reset command from xc5000 */
+
+			/*
+			 * djh - According to the engineer at PCTV Systems,
+			 * the xc5000 reset pin is supposed to be on GPIO12.
+			 * However, despite three nights of effort, pulling
+			 * that GPIO low didn't reset the xc5000.  While
+			 * pulling MO_SRST_IO low does reset the xc5000, this
+			 * also resets in the s5h1409 being reset as well.
+			 * This causes tuning to always fail since the internal
+			 * state of the s5h1409 does not match the driver's
+			 * state.  Given that the only two conditions in which
+			 * the driver performs a reset is during firmware load
+			 * and powering down the chip, I am taking out the
+			 * reset.  We know that the chip is being reset
+			 * when the cx88 comes online, and not being able to
+			 * do power management for this board is worse than
+			 * not having any tuning at all.
+			 */
+			return 0;
+		}
+
+		dprintk(1, "xc5000: unknown tuner callback command.\n");
+		return -EINVAL;
+	case CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD:
+		if (command == 0) { /* This is the reset command from xc5000 */
+			cx_clear(MO_GP0_IO, 0x00000010);
+			usleep_range(10000, 20000);
+			cx_set(MO_GP0_IO, 0x00000010);
+			return 0;
+		}
+
+		dprintk(1, "xc5000: unknown tuner callback command.\n");
+		return -EINVAL;
+	}
+	return 0; /* Should never be here */
+}
+
+int cx88_tuner_callback(void *priv, int component, int command, int arg)
+{
+	struct i2c_algo_bit_data *i2c_algo = priv;
+	struct cx88_core *core;
+
+	if (!i2c_algo) {
+		pr_err("Error - i2c private data undefined.\n");
+		return -EINVAL;
+	}
+
+	core = i2c_algo->data;
+
+	if (!core) {
+		pr_err("Error - device struct undefined.\n");
+		return -EINVAL;
+	}
+
+	if (component != DVB_FRONTEND_COMPONENT_TUNER)
+		return -EINVAL;
+
+	switch (core->board.tuner_type) {
+	case TUNER_XC2028:
+		dprintk(1, "Calling XC2028/3028 callback\n");
+		return cx88_xc2028_tuner_callback(core, command, arg);
+	case TUNER_XC4000:
+		dprintk(1, "Calling XC4000 callback\n");
+		return cx88_xc4000_tuner_callback(core, command, arg);
+	case TUNER_XC5000:
+		dprintk(1, "Calling XC5000 callback\n");
+		return cx88_xc5000_tuner_callback(core, command, arg);
+	}
+	pr_err("Error: Calling callback for tuner %d\n",
+	       core->board.tuner_type);
+	return -EINVAL;
+}
+EXPORT_SYMBOL(cx88_tuner_callback);
+
+/* ----------------------------------------------------------------------- */
+
+static void cx88_card_list(struct cx88_core *core, struct pci_dev *pci)
+{
+	int i;
+
+	if (!pci->subsystem_vendor && !pci->subsystem_device) {
+		pr_err("Your board has no valid PCI Subsystem ID and thus can't\n");
+		pr_err("be autodetected.  Please pass card=<n> insmod option to\n");
+		pr_err("workaround that.  Redirect complaints to the vendor of\n");
+		pr_err("the TV card\n");
+	} else {
+		pr_err("Your board isn't known (yet) to the driver.  You can\n");
+		pr_err("try to pick one of the existing card configs via\n");
+		pr_err("card=<n> insmod option.  Updating to the latest\n");
+		pr_err("version might help as well.\n");
+	}
+	pr_err("Here is a list of valid choices for the card=<n> insmod option:\n");
+	for (i = 0; i < ARRAY_SIZE(cx88_boards); i++)
+		pr_err("    card=%d -> %s\n", i, cx88_boards[i].name);
+}
+
+static void cx88_card_setup_pre_i2c(struct cx88_core *core)
+{
+	switch (core->boardnr) {
+	case CX88_BOARD_HAUPPAUGE_HVR1300:
+		/*
+		 * Bring the 702 demod up before i2c scanning/attach or
+		 * devices are hidden.
+		 *
+		 * We leave here with the 702 on the bus
+		 *
+		 * "reset the IR receiver on GPIO[3]"
+		 * Reported by Mike Crash <mike AT mikecrash.com>
+		 */
+		cx_write(MO_GP0_IO, 0x0000ef88);
+		udelay(1000);
+		cx_clear(MO_GP0_IO, 0x00000088);
+		udelay(50);
+		cx_set(MO_GP0_IO, 0x00000088); /* 702 out of reset */
+		udelay(1000);
+		break;
+
+	case CX88_BOARD_PROLINK_PV_GLOBAL_XTREME:
+	case CX88_BOARD_PROLINK_PV_8000GT:
+		cx_write(MO_GP2_IO, 0xcf7);
+		msleep(50);
+		cx_write(MO_GP2_IO, 0xef5);
+		msleep(50);
+		cx_write(MO_GP2_IO, 0xcf7);
+		usleep_range(10000, 20000);
+		break;
+
+	case CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD:
+		/* Enable the xc5000 tuner */
+		cx_set(MO_GP0_IO, 0x00001010);
+		break;
+
+	case CX88_BOARD_WINFAST_DTV2000H_J:
+	case CX88_BOARD_HAUPPAUGE_HVR3000:
+	case CX88_BOARD_HAUPPAUGE_HVR4000:
+		/* Init GPIO */
+		cx_write(MO_GP0_IO, core->board.input[0].gpio0);
+		udelay(1000);
+		cx_clear(MO_GP0_IO, 0x00000080);
+		udelay(50);
+		cx_set(MO_GP0_IO, 0x00000080); /* 702 out of reset */
+		udelay(1000);
+		break;
+
+	case CX88_BOARD_NOTONLYTV_LV3H:
+	case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL:
+	case CX88_BOARD_WINFAST_DTV1800H:
+		cx88_xc3028_winfast1800h_callback(core, XC2028_TUNER_RESET, 0);
+		break;
+
+	case CX88_BOARD_WINFAST_DTV1800H_XC4000:
+	case CX88_BOARD_WINFAST_DTV2000H_PLUS:
+	case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL_6F36:
+	case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL_6F43:
+		cx88_xc4000_winfast2000h_plus_callback(core,
+						       XC4000_TUNER_RESET, 0);
+		break;
+
+	case CX88_BOARD_TWINHAN_VP1027_DVBS:
+		cx_write(MO_GP0_IO, 0x00003230);
+		cx_write(MO_GP0_IO, 0x00003210);
+		usleep_range(10000, 20000);
+		cx_write(MO_GP0_IO, 0x00001230);
+		break;
+	}
+}
+
+/*
+ * Sets board-dependent xc3028 configuration
+ */
+void cx88_setup_xc3028(struct cx88_core *core, struct xc2028_ctrl *ctl)
+{
+	memset(ctl, 0, sizeof(*ctl));
+
+	ctl->fname   = XC2028_DEFAULT_FIRMWARE;
+	ctl->max_len = 64;
+
+	switch (core->boardnr) {
+	case CX88_BOARD_POWERCOLOR_REAL_ANGEL:
+		/* Now works with firmware version 2.7 */
+		if (core->i2c_algo.udelay < 16)
+			core->i2c_algo.udelay = 16;
+		break;
+	case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO:
+	case CX88_BOARD_WINFAST_DTV1800H:
+		ctl->demod = XC3028_FE_ZARLINK456;
+		break;
+	case CX88_BOARD_KWORLD_ATSC_120:
+	case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
+		ctl->demod = XC3028_FE_OREN538;
+		break;
+	case CX88_BOARD_GENIATECH_X8000_MT:
+		/*
+		 * FIXME: For this board, the xc3028 never recovers after being
+		 * powered down (the reset GPIO probably is not set properly).
+		 * We don't have access to the hardware so we cannot determine
+		 * which GPIO is used for xc3028, so just disable power xc3028
+		 * power management for now
+		 */
+		ctl->disable_power_mgmt = 1;
+		break;
+	case CX88_BOARD_NOTONLYTV_LV3H:
+		ctl->demod			= XC3028_FE_ZARLINK456;
+		ctl->fname			= XC3028L_DEFAULT_FIRMWARE;
+		ctl->read_not_reliable	= 1;
+		break;
+	case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL:
+	case CX88_BOARD_PROLINK_PV_GLOBAL_XTREME:
+	case CX88_BOARD_PROLINK_PV_8000GT:
+		/*
+		 * Those boards uses non-MTS firmware
+		 */
+		break;
+	case CX88_BOARD_PINNACLE_HYBRID_PCTV:
+	case CX88_BOARD_TERRATEC_CINERGY_HT_PCI_MKII:
+		ctl->demod = XC3028_FE_ZARLINK456;
+		ctl->mts = 1;
+		break;
+	default:
+		ctl->demod = XC3028_FE_OREN538;
+		ctl->mts = 1;
+	}
+}
+EXPORT_SYMBOL_GPL(cx88_setup_xc3028);
+
+static void cx88_card_setup(struct cx88_core *core)
+{
+	static u8 eeprom[256];
+	struct tuner_setup tun_setup;
+	unsigned int mode_mask = T_RADIO | T_ANALOG_TV;
+
+	memset(&tun_setup, 0, sizeof(tun_setup));
+
+	if (!core->i2c_rc) {
+		core->i2c_client.addr = 0xa0 >> 1;
+		tveeprom_read(&core->i2c_client, eeprom, sizeof(eeprom));
+	}
+
+	switch (core->boardnr) {
+	case CX88_BOARD_HAUPPAUGE:
+	case CX88_BOARD_HAUPPAUGE_ROSLYN:
+		if (!core->i2c_rc)
+			hauppauge_eeprom(core, eeprom + 8);
+		break;
+	case CX88_BOARD_GDI:
+		if (!core->i2c_rc)
+			gdi_eeprom(core, eeprom);
+		break;
+	case CX88_BOARD_LEADTEK_PVR2000:
+	case CX88_BOARD_WINFAST_DV2000:
+	case CX88_BOARD_WINFAST2000XP_EXPERT:
+		if (!core->i2c_rc)
+			leadtek_eeprom(core, eeprom);
+		break;
+	case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1:
+	case CX88_BOARD_HAUPPAUGE_NOVASE2_S1:
+	case CX88_BOARD_HAUPPAUGE_DVB_T1:
+	case CX88_BOARD_HAUPPAUGE_HVR1100:
+	case CX88_BOARD_HAUPPAUGE_HVR1100LP:
+	case CX88_BOARD_HAUPPAUGE_HVR3000:
+	case CX88_BOARD_HAUPPAUGE_HVR1300:
+	case CX88_BOARD_HAUPPAUGE_HVR4000:
+	case CX88_BOARD_HAUPPAUGE_HVR4000LITE:
+	case CX88_BOARD_HAUPPAUGE_IRONLY:
+		if (!core->i2c_rc)
+			hauppauge_eeprom(core, eeprom);
+		break;
+	case CX88_BOARD_KWORLD_DVBS_100:
+		cx_write(MO_GP0_IO, 0x000007f8);
+		cx_write(MO_GP1_IO, 0x00000001);
+		break;
+	case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO:
+		/* GPIO0:0 is hooked to demod reset */
+		/* GPIO0:4 is hooked to xc3028 reset */
+		cx_write(MO_GP0_IO, 0x00111100);
+		usleep_range(10000, 20000);
+		cx_write(MO_GP0_IO, 0x00111111);
+		break;
+	case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL:
+		/* GPIO0:6 is hooked to FX2 reset pin */
+		cx_set(MO_GP0_IO, 0x00004040);
+		cx_clear(MO_GP0_IO, 0x00000040);
+		msleep(1000);
+		cx_set(MO_GP0_IO, 0x00004040);
+		fallthrough;
+	case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T1:
+	case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS:
+	case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_HYBRID:
+		/* GPIO0:0 is hooked to mt352 reset pin */
+		cx_set(MO_GP0_IO, 0x00000101);
+		cx_clear(MO_GP0_IO, 0x00000001);
+		usleep_range(10000, 20000);
+		cx_set(MO_GP0_IO, 0x00000101);
+		if (!core->i2c_rc &&
+		    core->boardnr == CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_HYBRID)
+			dvico_fusionhdtv_hybrid_init(core);
+		break;
+	case CX88_BOARD_KWORLD_DVB_T:
+	case CX88_BOARD_DNTV_LIVE_DVB_T:
+		cx_set(MO_GP0_IO, 0x00000707);
+		cx_set(MO_GP2_IO, 0x00000101);
+		cx_clear(MO_GP2_IO, 0x00000001);
+		usleep_range(10000, 20000);
+		cx_clear(MO_GP0_IO, 0x00000007);
+		cx_set(MO_GP2_IO, 0x00000101);
+		break;
+	case CX88_BOARD_DNTV_LIVE_DVB_T_PRO:
+		cx_write(MO_GP0_IO, 0x00080808);
+		break;
+	case CX88_BOARD_ATI_HDTVWONDER:
+		if (!core->i2c_rc) {
+			/* enable tuner */
+			int i;
+			static const u8 buffer[][2] = {
+				{0x10, 0x12},
+				{0x13, 0x04},
+				{0x16, 0x00},
+				{0x14, 0x04},
+				{0x17, 0x00}
+			};
+			core->i2c_client.addr = 0x0a;
+
+			for (i = 0; i < ARRAY_SIZE(buffer); i++)
+				if (i2c_master_send(&core->i2c_client,
+						    buffer[i], 2) != 2)
+					pr_warn("Unable to enable tuner(%i).\n",
+						i);
+		}
+		break;
+	case CX88_BOARD_MSI_TVANYWHERE_MASTER:
+	{
+		struct v4l2_priv_tun_config tea5767_cfg;
+		struct tea5767_ctrl ctl;
+
+		memset(&ctl, 0, sizeof(ctl));
+
+		ctl.high_cut  = 1;
+		ctl.st_noise  = 1;
+		ctl.deemph_75 = 1;
+		ctl.xtal_freq = TEA5767_HIGH_LO_13MHz;
+
+		tea5767_cfg.tuner = TUNER_TEA5767;
+		tea5767_cfg.priv  = &ctl;
+
+		call_all(core, tuner, s_config, &tea5767_cfg);
+		break;
+	}
+	case  CX88_BOARD_TEVII_S420:
+	case  CX88_BOARD_TEVII_S460:
+	case  CX88_BOARD_TEVII_S464:
+	case  CX88_BOARD_OMICOM_SS4_PCI:
+	case  CX88_BOARD_TBS_8910:
+	case  CX88_BOARD_TBS_8920:
+	case  CX88_BOARD_PROF_6200:
+	case  CX88_BOARD_PROF_7300:
+	case  CX88_BOARD_PROF_7301:
+	case  CX88_BOARD_SATTRADE_ST4200:
+		cx_write(MO_GP0_IO, 0x8000);
+		msleep(100);
+		cx_write(MO_SRST_IO, 0);
+		usleep_range(10000, 20000);
+		cx_write(MO_GP0_IO, 0x8080);
+		msleep(100);
+		cx_write(MO_SRST_IO, 1);
+		msleep(100);
+		break;
+	} /*end switch() */
+
+	/* Setup tuners */
+	if (core->board.radio_type != UNSET) {
+		tun_setup.mode_mask      = T_RADIO;
+		tun_setup.type           = core->board.radio_type;
+		tun_setup.addr           = core->board.radio_addr;
+		tun_setup.tuner_callback = cx88_tuner_callback;
+		call_all(core, tuner, s_type_addr, &tun_setup);
+		mode_mask &= ~T_RADIO;
+	}
+
+	if (core->board.tuner_type != UNSET) {
+		tun_setup.mode_mask      = mode_mask;
+		tun_setup.type           = core->board.tuner_type;
+		tun_setup.addr           = core->board.tuner_addr;
+		tun_setup.tuner_callback = cx88_tuner_callback;
+
+		call_all(core, tuner, s_type_addr, &tun_setup);
+	}
+
+	if (core->board.tda9887_conf) {
+		struct v4l2_priv_tun_config tda9887_cfg;
+
+		tda9887_cfg.tuner = TUNER_TDA9887;
+		tda9887_cfg.priv  = &core->board.tda9887_conf;
+
+		call_all(core, tuner, s_config, &tda9887_cfg);
+	}
+
+	if (core->board.tuner_type == TUNER_XC2028) {
+		struct v4l2_priv_tun_config  xc2028_cfg;
+		struct xc2028_ctrl           ctl;
+
+		/* Fills device-dependent initialization parameters */
+		cx88_setup_xc3028(core, &ctl);
+
+		/* Sends parameters to xc2028/3028 tuner */
+		memset(&xc2028_cfg, 0, sizeof(xc2028_cfg));
+		xc2028_cfg.tuner = TUNER_XC2028;
+		xc2028_cfg.priv  = &ctl;
+		dprintk(1, "Asking xc2028/3028 to load firmware %s\n",
+			ctl.fname);
+		call_all(core, tuner, s_config, &xc2028_cfg);
+	}
+	call_all(core, tuner, standby);
+}
+
+/* ------------------------------------------------------------------ */
+
+static int cx88_pci_quirks(const char *name, struct pci_dev *pci)
+{
+	unsigned int lat = UNSET;
+	u8 ctrl = 0;
+	u8 value;
+
+	/* check pci quirks */
+	if (pci_pci_problems & PCIPCI_TRITON) {
+		pr_info("quirk: PCIPCI_TRITON -- set TBFX\n");
+		ctrl |= CX88X_EN_TBFX;
+	}
+	if (pci_pci_problems & PCIPCI_NATOMA) {
+		pr_info("quirk: PCIPCI_NATOMA -- set TBFX\n");
+		ctrl |= CX88X_EN_TBFX;
+	}
+	if (pci_pci_problems & PCIPCI_VIAETBF) {
+		pr_info("quirk: PCIPCI_VIAETBF -- set TBFX\n");
+		ctrl |= CX88X_EN_TBFX;
+	}
+	if (pci_pci_problems & PCIPCI_VSFX) {
+		pr_info("quirk: PCIPCI_VSFX -- set VSFX\n");
+		ctrl |= CX88X_EN_VSFX;
+	}
+#ifdef PCIPCI_ALIMAGIK
+	if (pci_pci_problems & PCIPCI_ALIMAGIK) {
+		pr_info("quirk: PCIPCI_ALIMAGIK -- latency fixup\n");
+		lat = 0x0A;
+	}
+#endif
+
+	/* check insmod options */
+	if (latency != UNSET)
+		lat = latency;
+
+	/* apply stuff */
+	if (ctrl) {
+		pci_read_config_byte(pci, CX88X_DEVCTRL, &value);
+		value |= ctrl;
+		pci_write_config_byte(pci, CX88X_DEVCTRL, value);
+	}
+	if (lat != UNSET) {
+		pr_info("setting pci latency timer to %d\n", latency);
+		pci_write_config_byte(pci, PCI_LATENCY_TIMER, latency);
+	}
+	return 0;
+}
+
+int cx88_get_resources(const struct cx88_core *core, struct pci_dev *pci)
+{
+	if (request_mem_region(pci_resource_start(pci, 0),
+			       pci_resource_len(pci, 0),
+			       core->name))
+		return 0;
+	pr_err("func %d: Can't get MMIO memory @ 0x%llx, subsystem: %04x:%04x\n",
+	       PCI_FUNC(pci->devfn),
+	       (unsigned long long)pci_resource_start(pci, 0),
+	       pci->subsystem_vendor, pci->subsystem_device);
+	return -EBUSY;
+}
+
+/*
+ * Allocate and initialize the cx88 core struct.  One should hold the
+ * devlist mutex before calling this.
+ */
+struct cx88_core *cx88_core_create(struct pci_dev *pci, int nr)
+{
+	struct cx88_core *core;
+	int i;
+
+	core = kzalloc(sizeof(*core), GFP_KERNEL);
+	if (!core)
+		return NULL;
+
+	refcount_set(&core->refcount, 1);
+	core->pci_bus  = pci->bus->number;
+	core->pci_slot = PCI_SLOT(pci->devfn);
+	core->pci_irqmask = PCI_INT_RISC_RD_BERRINT | PCI_INT_RISC_WR_BERRINT |
+			    PCI_INT_BRDG_BERRINT | PCI_INT_SRC_DMA_BERRINT |
+			    PCI_INT_DST_DMA_BERRINT | PCI_INT_IPB_DMA_BERRINT;
+	mutex_init(&core->lock);
+
+	core->nr = nr;
+	sprintf(core->name, "cx88[%d]", core->nr);
+
+	/*
+	 * Note: Setting initial standard here would cause first call to
+	 * cx88_set_tvnorm() to return without programming any registers.  Leave
+	 * it blank for at this point and it will get set later in
+	 * cx8800_initdev()
+	 */
+	core->tvnorm  = 0;
+
+	core->width   = 320;
+	core->height  = 240;
+	core->field   = V4L2_FIELD_INTERLACED;
+
+	strscpy(core->v4l2_dev.name, core->name, sizeof(core->v4l2_dev.name));
+	if (v4l2_device_register(NULL, &core->v4l2_dev)) {
+		kfree(core);
+		return NULL;
+	}
+
+	if (v4l2_ctrl_handler_init(&core->video_hdl, 13)) {
+		v4l2_device_unregister(&core->v4l2_dev);
+		kfree(core);
+		return NULL;
+	}
+
+	if (v4l2_ctrl_handler_init(&core->audio_hdl, 13)) {
+		v4l2_ctrl_handler_free(&core->video_hdl);
+		v4l2_device_unregister(&core->v4l2_dev);
+		kfree(core);
+		return NULL;
+	}
+
+	if (cx88_get_resources(core, pci) != 0) {
+		v4l2_ctrl_handler_free(&core->video_hdl);
+		v4l2_ctrl_handler_free(&core->audio_hdl);
+		v4l2_device_unregister(&core->v4l2_dev);
+		kfree(core);
+		return NULL;
+	}
+
+	/* PCI stuff */
+	cx88_pci_quirks(core->name, pci);
+	core->lmmio = ioremap(pci_resource_start(pci, 0),
+			      pci_resource_len(pci, 0));
+	core->bmmio = (u8 __iomem *)core->lmmio;
+
+	if (!core->lmmio) {
+		release_mem_region(pci_resource_start(pci, 0),
+				   pci_resource_len(pci, 0));
+		v4l2_ctrl_handler_free(&core->video_hdl);
+		v4l2_ctrl_handler_free(&core->audio_hdl);
+		v4l2_device_unregister(&core->v4l2_dev);
+		kfree(core);
+		return NULL;
+	}
+
+	/* board config */
+	core->boardnr = UNSET;
+	if (card[core->nr] < ARRAY_SIZE(cx88_boards))
+		core->boardnr = card[core->nr];
+	for (i = 0; core->boardnr == UNSET && i < ARRAY_SIZE(cx88_subids); i++)
+		if (pci->subsystem_vendor == cx88_subids[i].subvendor &&
+		    pci->subsystem_device == cx88_subids[i].subdevice)
+			core->boardnr = cx88_subids[i].card;
+	if (core->boardnr == UNSET) {
+		core->boardnr = CX88_BOARD_UNKNOWN;
+		cx88_card_list(core, pci);
+	}
+
+	core->board = cx88_boards[core->boardnr];
+
+	if (!core->board.num_frontends && (core->board.mpeg & CX88_MPEG_DVB))
+		core->board.num_frontends = 1;
+
+	pr_info("subsystem: %04x:%04x, board: %s [card=%d,%s], frontend(s): %d\n",
+		pci->subsystem_vendor, pci->subsystem_device, core->board.name,
+		core->boardnr, card[core->nr] == core->boardnr ?
+		"insmod option" : "autodetected",
+		core->board.num_frontends);
+
+	if (tuner[core->nr] != UNSET)
+		core->board.tuner_type = tuner[core->nr];
+	if (radio[core->nr] != UNSET)
+		core->board.radio_type = radio[core->nr];
+
+	dprintk(1, "TV tuner type %d, Radio tuner type %d\n",
+		core->board.tuner_type, core->board.radio_type);
+
+	/* init hardware */
+	cx88_reset(core);
+	cx88_card_setup_pre_i2c(core);
+	cx88_i2c_init(core, pci);
+
+	/* load tuner module, if needed */
+	if (core->board.tuner_type != UNSET) {
+		/*
+		 * Ignore 0x6b and 0x6f on cx88 boards.
+		 * FusionHDTV5 RT Gold has an ir receiver at 0x6b
+		 * and an RTC at 0x6f which can get corrupted if probed.
+		 */
+		static const unsigned short tv_addrs[] = {
+			0x42, 0x43, 0x4a, 0x4b,		/* tda8290 */
+			0x60, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67,
+			0x68, 0x69, 0x6a, 0x6c, 0x6d, 0x6e,
+			I2C_CLIENT_END
+		};
+		int has_demod = (core->board.tda9887_conf & TDA9887_PRESENT);
+
+		/*
+		 * I don't trust the radio_type as is stored in the card
+		 * definitions, so we just probe for it.
+		 * The radio_type is sometimes missing, or set to UNSET but
+		 * later code configures a tea5767.
+		 */
+		v4l2_i2c_new_subdev(&core->v4l2_dev, &core->i2c_adap,
+				    "tuner", 0,
+				    v4l2_i2c_tuner_addrs(ADDRS_RADIO));
+		if (has_demod)
+			v4l2_i2c_new_subdev(&core->v4l2_dev,
+					    &core->i2c_adap, "tuner",
+				0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
+		if (core->board.tuner_addr == ADDR_UNSET) {
+			v4l2_i2c_new_subdev(&core->v4l2_dev,
+					    &core->i2c_adap, "tuner",
+				0, has_demod ? tv_addrs + 4 : tv_addrs);
+		} else {
+			v4l2_i2c_new_subdev(&core->v4l2_dev, &core->i2c_adap,
+					    "tuner", core->board.tuner_addr,
+					    NULL);
+		}
+	}
+
+	cx88_card_setup(core);
+	if (!disable_ir) {
+		cx88_i2c_init_ir(core);
+		cx88_ir_init(core, pci);
+	}
+
+	return core;
+}
diff --git a/drivers/media/pci/cx88/cx88-core.c b/drivers/media/pci/cx88/cx88-core.c
new file mode 100644
index 000000000..52be42f9a
--- /dev/null
+++ b/drivers/media/pci/cx88/cx88-core.c
@@ -0,0 +1,1099 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * device driver for Conexant 2388x based TV cards
+ * driver core
+ *
+ * (c) 2003 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
+ *
+ * (c) 2005-2006 Mauro Carvalho Chehab <mchehab@kernel.org>
+ *     - Multituner support
+ *     - video_ioctl2 conversion
+ *     - PAL/M fixes
+ */
+
+#include "cx88.h"
+
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/kmod.h>
+#include <linux/sound.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/videodev2.h>
+#include <linux/mutex.h>
+
+#include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
+
+MODULE_DESCRIPTION("v4l2 driver module for cx2388x based TV cards");
+MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
+MODULE_LICENSE("GPL v2");
+
+/* ------------------------------------------------------------------ */
+
+unsigned int cx88_core_debug;
+module_param_named(core_debug, cx88_core_debug, int, 0644);
+MODULE_PARM_DESC(core_debug, "enable debug messages [core]");
+
+static unsigned int nicam;
+module_param(nicam, int, 0644);
+MODULE_PARM_DESC(nicam, "tv audio is nicam");
+
+static unsigned int nocomb;
+module_param(nocomb, int, 0644);
+MODULE_PARM_DESC(nocomb, "disable comb filter");
+
+#define dprintk0(fmt, arg...)				\
+	printk(KERN_DEBUG pr_fmt("%s: core:" fmt),	\
+		__func__, ##arg)			\
+
+#define dprintk(level, fmt, arg...)	do {			\
+	if (cx88_core_debug >= level)				\
+		printk(KERN_DEBUG pr_fmt("%s: core:" fmt),	\
+		       __func__, ##arg);			\
+} while (0)
+
+static unsigned int cx88_devcount;
+static LIST_HEAD(cx88_devlist);
+static DEFINE_MUTEX(devlist);
+
+#define NO_SYNC_LINE (-1U)
+
+/*
+ * @lpi: lines per IRQ, or 0 to not generate irqs. Note: IRQ to be
+ * generated _after_ lpi lines are transferred.
+ */
+static __le32 *cx88_risc_field(__le32 *rp, struct scatterlist *sglist,
+			       unsigned int offset, u32 sync_line,
+			       unsigned int bpl, unsigned int padding,
+			       unsigned int lines, unsigned int lpi, bool jump)
+{
+	struct scatterlist *sg;
+	unsigned int line, todo, sol;
+
+	if (jump) {
+		(*rp++) = cpu_to_le32(RISC_JUMP);
+		(*rp++) = 0;
+	}
+
+	/* sync instruction */
+	if (sync_line != NO_SYNC_LINE)
+		*(rp++) = cpu_to_le32(RISC_RESYNC | sync_line);
+
+	/* scan lines */
+	sg = sglist;
+	for (line = 0; line < lines; line++) {
+		while (offset && offset >= sg_dma_len(sg)) {
+			offset -= sg_dma_len(sg);
+			sg = sg_next(sg);
+		}
+		if (lpi && line > 0 && !(line % lpi))
+			sol = RISC_SOL | RISC_IRQ1 | RISC_CNT_INC;
+		else
+			sol = RISC_SOL;
+		if (bpl <= sg_dma_len(sg) - offset) {
+			/* fits into current chunk */
+			*(rp++) = cpu_to_le32(RISC_WRITE | sol |
+					      RISC_EOL | bpl);
+			*(rp++) = cpu_to_le32(sg_dma_address(sg) + offset);
+			offset += bpl;
+		} else {
+			/* scanline needs to be split */
+			todo = bpl;
+			*(rp++) = cpu_to_le32(RISC_WRITE | sol |
+					      (sg_dma_len(sg) - offset));
+			*(rp++) = cpu_to_le32(sg_dma_address(sg) + offset);
+			todo -= (sg_dma_len(sg) - offset);
+			offset = 0;
+			sg = sg_next(sg);
+			while (todo > sg_dma_len(sg)) {
+				*(rp++) = cpu_to_le32(RISC_WRITE |
+						      sg_dma_len(sg));
+				*(rp++) = cpu_to_le32(sg_dma_address(sg));
+				todo -= sg_dma_len(sg);
+				sg = sg_next(sg);
+			}
+			*(rp++) = cpu_to_le32(RISC_WRITE | RISC_EOL | todo);
+			*(rp++) = cpu_to_le32(sg_dma_address(sg));
+			offset += todo;
+		}
+		offset += padding;
+	}
+
+	return rp;
+}
+
+int cx88_risc_buffer(struct pci_dev *pci, struct cx88_riscmem *risc,
+		     struct scatterlist *sglist,
+		     unsigned int top_offset, unsigned int bottom_offset,
+		     unsigned int bpl, unsigned int padding, unsigned int lines)
+{
+	u32 instructions, fields;
+	__le32 *rp;
+
+	fields = 0;
+	if (top_offset != UNSET)
+		fields++;
+	if (bottom_offset != UNSET)
+		fields++;
+
+	/*
+	 * estimate risc mem: worst case is one write per page border +
+	 * one write per scan line + syncs + jump (all 2 dwords).  Padding
+	 * can cause next bpl to start close to a page border.  First DMA
+	 * region may be smaller than PAGE_SIZE
+	 */
+	instructions  = fields * (1 + ((bpl + padding) * lines) /
+				  PAGE_SIZE + lines);
+	instructions += 4;
+	risc->size = instructions * 8;
+	risc->dma = 0;
+	risc->cpu = dma_alloc_coherent(&pci->dev, risc->size, &risc->dma,
+				       GFP_KERNEL);
+	if (!risc->cpu)
+		return -ENOMEM;
+
+	/* write risc instructions */
+	rp = risc->cpu;
+	if (top_offset != UNSET)
+		rp = cx88_risc_field(rp, sglist, top_offset, 0,
+				     bpl, padding, lines, 0, true);
+	if (bottom_offset != UNSET)
+		rp = cx88_risc_field(rp, sglist, bottom_offset, 0x200,
+				     bpl, padding, lines, 0,
+				     top_offset == UNSET);
+
+	/* save pointer to jmp instruction address */
+	risc->jmp = rp;
+	WARN_ON((risc->jmp - risc->cpu + 2) * sizeof(*risc->cpu) > risc->size);
+	return 0;
+}
+EXPORT_SYMBOL(cx88_risc_buffer);
+
+int cx88_risc_databuffer(struct pci_dev *pci, struct cx88_riscmem *risc,
+			 struct scatterlist *sglist, unsigned int bpl,
+			 unsigned int lines, unsigned int lpi)
+{
+	u32 instructions;
+	__le32 *rp;
+
+	/*
+	 * estimate risc mem: worst case is one write per page border +
+	 * one write per scan line + syncs + jump (all 2 dwords).  Here
+	 * there is no padding and no sync.  First DMA region may be smaller
+	 * than PAGE_SIZE
+	 */
+	instructions  = 1 + (bpl * lines) / PAGE_SIZE + lines;
+	instructions += 3;
+	risc->size = instructions * 8;
+	risc->dma = 0;
+	risc->cpu = dma_alloc_coherent(&pci->dev, risc->size, &risc->dma,
+				       GFP_KERNEL);
+	if (!risc->cpu)
+		return -ENOMEM;
+
+	/* write risc instructions */
+	rp = risc->cpu;
+	rp = cx88_risc_field(rp, sglist, 0, NO_SYNC_LINE, bpl, 0,
+			     lines, lpi, !lpi);
+
+	/* save pointer to jmp instruction address */
+	risc->jmp = rp;
+	WARN_ON((risc->jmp - risc->cpu + 2) * sizeof(*risc->cpu) > risc->size);
+	return 0;
+}
+EXPORT_SYMBOL(cx88_risc_databuffer);
+
+/*
+ * our SRAM memory layout
+ */
+
+/*
+ * we are going to put all thr risc programs into host memory, so we
+ * can use the whole SDRAM for the DMA fifos.  To simplify things, we
+ * use a static memory layout.  That surely will waste memory in case
+ * we don't use all DMA channels at the same time (which will be the
+ * case most of the time).  But that still gives us enough FIFO space
+ * to be able to deal with insane long pci latencies ...
+ *
+ * FIFO space allocations:
+ *    channel  21    (y video)  - 10.0k
+ *    channel  22    (u video)  -  2.0k
+ *    channel  23    (v video)  -  2.0k
+ *    channel  24    (vbi)      -  4.0k
+ *    channels 25+26 (audio)    -  4.0k
+ *    channel  28    (mpeg)     -  4.0k
+ *    channel  27    (audio rds)-  3.0k
+ *    TOTAL                     = 29.0k
+ *
+ * Every channel has 160 bytes control data (64 bytes instruction
+ * queue and 6 CDT entries), which is close to 2k total.
+ *
+ * Address layout:
+ *    0x0000 - 0x03ff    CMDs / reserved
+ *    0x0400 - 0x0bff    instruction queues + CDs
+ *    0x0c00 -           FIFOs
+ */
+
+const struct sram_channel cx88_sram_channels[] = {
+	[SRAM_CH21] = {
+		.name       = "video y / packed",
+		.cmds_start = 0x180040,
+		.ctrl_start = 0x180400,
+		.cdt        = 0x180400 + 64,
+		.fifo_start = 0x180c00,
+		.fifo_size  = 0x002800,
+		.ptr1_reg   = MO_DMA21_PTR1,
+		.ptr2_reg   = MO_DMA21_PTR2,
+		.cnt1_reg   = MO_DMA21_CNT1,
+		.cnt2_reg   = MO_DMA21_CNT2,
+	},
+	[SRAM_CH22] = {
+		.name       = "video u",
+		.cmds_start = 0x180080,
+		.ctrl_start = 0x1804a0,
+		.cdt        = 0x1804a0 + 64,
+		.fifo_start = 0x183400,
+		.fifo_size  = 0x000800,
+		.ptr1_reg   = MO_DMA22_PTR1,
+		.ptr2_reg   = MO_DMA22_PTR2,
+		.cnt1_reg   = MO_DMA22_CNT1,
+		.cnt2_reg   = MO_DMA22_CNT2,
+	},
+	[SRAM_CH23] = {
+		.name       = "video v",
+		.cmds_start = 0x1800c0,
+		.ctrl_start = 0x180540,
+		.cdt        = 0x180540 + 64,
+		.fifo_start = 0x183c00,
+		.fifo_size  = 0x000800,
+		.ptr1_reg   = MO_DMA23_PTR1,
+		.ptr2_reg   = MO_DMA23_PTR2,
+		.cnt1_reg   = MO_DMA23_CNT1,
+		.cnt2_reg   = MO_DMA23_CNT2,
+	},
+	[SRAM_CH24] = {
+		.name       = "vbi",
+		.cmds_start = 0x180100,
+		.ctrl_start = 0x1805e0,
+		.cdt        = 0x1805e0 + 64,
+		.fifo_start = 0x184400,
+		.fifo_size  = 0x001000,
+		.ptr1_reg   = MO_DMA24_PTR1,
+		.ptr2_reg   = MO_DMA24_PTR2,
+		.cnt1_reg   = MO_DMA24_CNT1,
+		.cnt2_reg   = MO_DMA24_CNT2,
+	},
+	[SRAM_CH25] = {
+		.name       = "audio from",
+		.cmds_start = 0x180140,
+		.ctrl_start = 0x180680,
+		.cdt        = 0x180680 + 64,
+		.fifo_start = 0x185400,
+		.fifo_size  = 0x001000,
+		.ptr1_reg   = MO_DMA25_PTR1,
+		.ptr2_reg   = MO_DMA25_PTR2,
+		.cnt1_reg   = MO_DMA25_CNT1,
+		.cnt2_reg   = MO_DMA25_CNT2,
+	},
+	[SRAM_CH26] = {
+		.name       = "audio to",
+		.cmds_start = 0x180180,
+		.ctrl_start = 0x180720,
+		.cdt        = 0x180680 + 64,  /* same as audio IN */
+		.fifo_start = 0x185400,       /* same as audio IN */
+		.fifo_size  = 0x001000,       /* same as audio IN */
+		.ptr1_reg   = MO_DMA26_PTR1,
+		.ptr2_reg   = MO_DMA26_PTR2,
+		.cnt1_reg   = MO_DMA26_CNT1,
+		.cnt2_reg   = MO_DMA26_CNT2,
+	},
+	[SRAM_CH28] = {
+		.name       = "mpeg",
+		.cmds_start = 0x180200,
+		.ctrl_start = 0x1807C0,
+		.cdt        = 0x1807C0 + 64,
+		.fifo_start = 0x186400,
+		.fifo_size  = 0x001000,
+		.ptr1_reg   = MO_DMA28_PTR1,
+		.ptr2_reg   = MO_DMA28_PTR2,
+		.cnt1_reg   = MO_DMA28_CNT1,
+		.cnt2_reg   = MO_DMA28_CNT2,
+	},
+	[SRAM_CH27] = {
+		.name       = "audio rds",
+		.cmds_start = 0x1801C0,
+		.ctrl_start = 0x180860,
+		.cdt        = 0x180860 + 64,
+		.fifo_start = 0x187400,
+		.fifo_size  = 0x000C00,
+		.ptr1_reg   = MO_DMA27_PTR1,
+		.ptr2_reg   = MO_DMA27_PTR2,
+		.cnt1_reg   = MO_DMA27_CNT1,
+		.cnt2_reg   = MO_DMA27_CNT2,
+	},
+};
+EXPORT_SYMBOL(cx88_sram_channels);
+
+int cx88_sram_channel_setup(struct cx88_core *core,
+			    const struct sram_channel *ch,
+			    unsigned int bpl, u32 risc)
+{
+	unsigned int i, lines;
+	u32 cdt;
+
+	bpl   = (bpl + 7) & ~7; /* alignment */
+	cdt   = ch->cdt;
+	lines = ch->fifo_size / bpl;
+	if (lines > 6)
+		lines = 6;
+	WARN_ON(lines < 2);
+
+	/* write CDT */
+	for (i = 0; i < lines; i++)
+		cx_write(cdt + 16 * i, ch->fifo_start + bpl * i);
+
+	/* write CMDS */
+	cx_write(ch->cmds_start +  0, risc);
+	cx_write(ch->cmds_start +  4, cdt);
+	cx_write(ch->cmds_start +  8, (lines * 16) >> 3);
+	cx_write(ch->cmds_start + 12, ch->ctrl_start);
+	cx_write(ch->cmds_start + 16, 64 >> 2);
+	for (i = 20; i < 64; i += 4)
+		cx_write(ch->cmds_start + i, 0);
+
+	/* fill registers */
+	cx_write(ch->ptr1_reg, ch->fifo_start);
+	cx_write(ch->ptr2_reg, cdt);
+	cx_write(ch->cnt1_reg, (bpl >> 3) - 1);
+	cx_write(ch->cnt2_reg, (lines * 16) >> 3);
+
+	dprintk(2, "sram setup %s: bpl=%d lines=%d\n", ch->name, bpl, lines);
+	return 0;
+}
+EXPORT_SYMBOL(cx88_sram_channel_setup);
+
+/* ------------------------------------------------------------------ */
+/* debug helper code                                                  */
+
+static int cx88_risc_decode(u32 risc)
+{
+	static const char * const instr[16] = {
+		[RISC_SYNC    >> 28] = "sync",
+		[RISC_WRITE   >> 28] = "write",
+		[RISC_WRITEC  >> 28] = "writec",
+		[RISC_READ    >> 28] = "read",
+		[RISC_READC   >> 28] = "readc",
+		[RISC_JUMP    >> 28] = "jump",
+		[RISC_SKIP    >> 28] = "skip",
+		[RISC_WRITERM >> 28] = "writerm",
+		[RISC_WRITECM >> 28] = "writecm",
+		[RISC_WRITECR >> 28] = "writecr",
+	};
+	static int const incr[16] = {
+		[RISC_WRITE   >> 28] = 2,
+		[RISC_JUMP    >> 28] = 2,
+		[RISC_WRITERM >> 28] = 3,
+		[RISC_WRITECM >> 28] = 3,
+		[RISC_WRITECR >> 28] = 4,
+	};
+	static const char * const bits[] = {
+		"12",   "13",   "14",   "resync",
+		"cnt0", "cnt1", "18",   "19",
+		"20",   "21",   "22",   "23",
+		"irq1", "irq2", "eol",  "sol",
+	};
+	int i;
+
+	dprintk0("0x%08x [ %s", risc,
+		 instr[risc >> 28] ? instr[risc >> 28] : "INVALID");
+	for (i = ARRAY_SIZE(bits) - 1; i >= 0; i--)
+		if (risc & (1 << (i + 12)))
+			pr_cont(" %s", bits[i]);
+	pr_cont(" count=%d ]\n", risc & 0xfff);
+	return incr[risc >> 28] ? incr[risc >> 28] : 1;
+}
+
+void cx88_sram_channel_dump(struct cx88_core *core,
+			    const struct sram_channel *ch)
+{
+	static const char * const name[] = {
+		"initial risc",
+		"cdt base",
+		"cdt size",
+		"iq base",
+		"iq size",
+		"risc pc",
+		"iq wr ptr",
+		"iq rd ptr",
+		"cdt current",
+		"pci target",
+		"line / byte",
+	};
+	u32 risc;
+	unsigned int i, j, n;
+
+	dprintk0("%s - dma channel status dump\n", ch->name);
+	for (i = 0; i < ARRAY_SIZE(name); i++)
+		dprintk0("   cmds: %-12s: 0x%08x\n",
+			 name[i], cx_read(ch->cmds_start + 4 * i));
+	for (n = 1, i = 0; i < 4; i++) {
+		risc = cx_read(ch->cmds_start + 4 * (i + 11));
+		pr_cont("  risc%d: ", i);
+		if (--n)
+			pr_cont("0x%08x [ arg #%d ]\n", risc, n);
+		else
+			n = cx88_risc_decode(risc);
+	}
+	for (i = 0; i < 16; i += n) {
+		risc = cx_read(ch->ctrl_start + 4 * i);
+		dprintk0("  iq %x: ", i);
+		n = cx88_risc_decode(risc);
+		for (j = 1; j < n; j++) {
+			risc = cx_read(ch->ctrl_start + 4 * (i + j));
+			pr_cont("  iq %x: 0x%08x [ arg #%d ]\n",
+				i + j, risc, j);
+		}
+	}
+
+	dprintk0("fifo: 0x%08x -> 0x%x\n",
+		 ch->fifo_start, ch->fifo_start + ch->fifo_size);
+	dprintk0("ctrl: 0x%08x -> 0x%x\n",
+		 ch->ctrl_start, ch->ctrl_start + 6 * 16);
+	dprintk0("  ptr1_reg: 0x%08x\n", cx_read(ch->ptr1_reg));
+	dprintk0("  ptr2_reg: 0x%08x\n", cx_read(ch->ptr2_reg));
+	dprintk0("  cnt1_reg: 0x%08x\n", cx_read(ch->cnt1_reg));
+	dprintk0("  cnt2_reg: 0x%08x\n", cx_read(ch->cnt2_reg));
+}
+EXPORT_SYMBOL(cx88_sram_channel_dump);
+
+static const char *cx88_pci_irqs[32] = {
+	"vid", "aud", "ts", "vip", "hst", "5", "6", "tm1",
+	"src_dma", "dst_dma", "risc_rd_err", "risc_wr_err",
+	"brdg_err", "src_dma_err", "dst_dma_err", "ipb_dma_err",
+	"i2c", "i2c_rack", "ir_smp", "gpio0", "gpio1"
+};
+
+void cx88_print_irqbits(const char *tag, const char *strings[],
+			int len, u32 bits, u32 mask)
+{
+	unsigned int i;
+
+	dprintk0("%s [0x%x]", tag, bits);
+	for (i = 0; i < len; i++) {
+		if (!(bits & (1 << i)))
+			continue;
+		if (strings[i])
+			pr_cont(" %s", strings[i]);
+		else
+			pr_cont(" %d", i);
+		if (!(mask & (1 << i)))
+			continue;
+		pr_cont("*");
+	}
+	pr_cont("\n");
+}
+EXPORT_SYMBOL(cx88_print_irqbits);
+
+/* ------------------------------------------------------------------ */
+
+int cx88_core_irq(struct cx88_core *core, u32 status)
+{
+	int handled = 0;
+
+	if (status & PCI_INT_IR_SMPINT) {
+		cx88_ir_irq(core);
+		handled++;
+	}
+	if (!handled)
+		cx88_print_irqbits("irq pci",
+				   cx88_pci_irqs, ARRAY_SIZE(cx88_pci_irqs),
+				   status, core->pci_irqmask);
+	return handled;
+}
+EXPORT_SYMBOL(cx88_core_irq);
+
+void cx88_wakeup(struct cx88_core *core,
+		 struct cx88_dmaqueue *q, u32 count)
+{
+	struct cx88_buffer *buf;
+
+	buf = list_entry(q->active.next,
+			 struct cx88_buffer, list);
+	buf->vb.vb2_buf.timestamp = ktime_get_ns();
+	buf->vb.field = core->field;
+	buf->vb.sequence = q->count++;
+	list_del(&buf->list);
+	vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE);
+}
+EXPORT_SYMBOL(cx88_wakeup);
+
+void cx88_shutdown(struct cx88_core *core)
+{
+	/* disable RISC controller + IRQs */
+	cx_write(MO_DEV_CNTRL2, 0);
+
+	/* stop dma transfers */
+	cx_write(MO_VID_DMACNTRL, 0x0);
+	cx_write(MO_AUD_DMACNTRL, 0x0);
+	cx_write(MO_TS_DMACNTRL, 0x0);
+	cx_write(MO_VIP_DMACNTRL, 0x0);
+	cx_write(MO_GPHST_DMACNTRL, 0x0);
+
+	/* stop interrupts */
+	cx_write(MO_PCI_INTMSK, 0x0);
+	cx_write(MO_VID_INTMSK, 0x0);
+	cx_write(MO_AUD_INTMSK, 0x0);
+	cx_write(MO_TS_INTMSK, 0x0);
+	cx_write(MO_VIP_INTMSK, 0x0);
+	cx_write(MO_GPHST_INTMSK, 0x0);
+
+	/* stop capturing */
+	cx_write(VID_CAPTURE_CONTROL, 0);
+}
+EXPORT_SYMBOL(cx88_shutdown);
+
+int cx88_reset(struct cx88_core *core)
+{
+	dprintk(1, "");
+	cx88_shutdown(core);
+
+	/* clear irq status */
+	cx_write(MO_VID_INTSTAT, 0xFFFFFFFF); // Clear PIV int
+	cx_write(MO_PCI_INTSTAT, 0xFFFFFFFF); // Clear PCI int
+	cx_write(MO_INT1_STAT,   0xFFFFFFFF); // Clear RISC int
+
+	/* wait a bit */
+	msleep(100);
+
+	/* init sram */
+	cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH21],
+				720 * 4, 0);
+	cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH22], 128, 0);
+	cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH23], 128, 0);
+	cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH24], 128, 0);
+	cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH25], 128, 0);
+	cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH26], 128, 0);
+	cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH28],
+				188 * 4, 0);
+	cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH27], 128, 0);
+
+	/* misc init ... */
+	cx_write(MO_INPUT_FORMAT, ((1 << 13) |   // agc enable
+				   (1 << 12) |   // agc gain
+				   (1 << 11) |   // adaptibe agc
+				   (0 << 10) |   // chroma agc
+				   (0 <<  9) |   // ckillen
+				   (7)));
+
+	/* setup image format */
+	cx_andor(MO_COLOR_CTRL, 0x4000, 0x4000);
+
+	/* setup FIFO Thresholds */
+	cx_write(MO_PDMA_STHRSH,   0x0807);
+	cx_write(MO_PDMA_DTHRSH,   0x0807);
+
+	/* fixes flashing of image */
+	cx_write(MO_AGC_SYNC_TIP1, 0x0380000F);
+	cx_write(MO_AGC_BACK_VBI,  0x00E00555);
+
+	cx_write(MO_VID_INTSTAT,   0xFFFFFFFF); // Clear PIV int
+	cx_write(MO_PCI_INTSTAT,   0xFFFFFFFF); // Clear PCI int
+	cx_write(MO_INT1_STAT,     0xFFFFFFFF); // Clear RISC int
+
+	/* Reset on-board parts */
+	cx_write(MO_SRST_IO, 0);
+	usleep_range(10000, 20000);
+	cx_write(MO_SRST_IO, 1);
+
+	return 0;
+}
+EXPORT_SYMBOL(cx88_reset);
+
+/* ------------------------------------------------------------------ */
+
+static inline unsigned int norm_swidth(v4l2_std_id norm)
+{
+	if (norm & (V4L2_STD_NTSC | V4L2_STD_PAL_M))
+		return 754;
+
+	if (norm & V4L2_STD_PAL_Nc)
+		return 745;
+
+	return 922;
+}
+
+static inline unsigned int norm_hdelay(v4l2_std_id norm)
+{
+	if (norm & (V4L2_STD_NTSC | V4L2_STD_PAL_M))
+		return 135;
+
+	if (norm & V4L2_STD_PAL_Nc)
+		return 149;
+
+	return 186;
+}
+
+static inline unsigned int norm_vdelay(v4l2_std_id norm)
+{
+	return (norm & V4L2_STD_625_50) ? 0x24 : 0x18;
+}
+
+static inline unsigned int norm_fsc8(v4l2_std_id norm)
+{
+	if (norm & V4L2_STD_PAL_M)
+		return 28604892;      // 3.575611 MHz
+
+	if (norm & V4L2_STD_PAL_Nc)
+		return 28656448;      // 3.582056 MHz
+
+	if (norm & V4L2_STD_NTSC) // All NTSC/M and variants
+		return 28636360;      // 3.57954545 MHz +/- 10 Hz
+
+	/*
+	 * SECAM have also different sub carrier for chroma,
+	 * but step_db and step_dr, at cx88_set_tvnorm already handles that.
+	 *
+	 * The same FSC applies to PAL/BGDKIH, PAL/60, NTSC/4.43 and PAL/N
+	 */
+
+	return 35468950;      // 4.43361875 MHz +/- 5 Hz
+}
+
+static inline unsigned int norm_htotal(v4l2_std_id norm)
+{
+	unsigned int fsc4 = norm_fsc8(norm) / 2;
+
+	/* returns 4*FSC / vtotal / frames per seconds */
+	return (norm & V4L2_STD_625_50) ?
+				((fsc4 + 312) / 625 + 12) / 25 :
+				((fsc4 + 262) / 525 * 1001 + 15000) / 30000;
+}
+
+static inline unsigned int norm_vbipack(v4l2_std_id norm)
+{
+	return (norm & V4L2_STD_625_50) ? 511 : 400;
+}
+
+int cx88_set_scale(struct cx88_core *core, unsigned int width,
+		   unsigned int height, enum v4l2_field field)
+{
+	unsigned int swidth  = norm_swidth(core->tvnorm);
+	unsigned int sheight = norm_maxh(core->tvnorm);
+	u32 value;
+
+	dprintk(1, "set_scale: %dx%d [%s%s,%s]\n", width, height,
+		V4L2_FIELD_HAS_TOP(field)    ? "T" : "",
+		V4L2_FIELD_HAS_BOTTOM(field) ? "B" : "",
+		v4l2_norm_to_name(core->tvnorm));
+	if (!V4L2_FIELD_HAS_BOTH(field))
+		height *= 2;
+
+	// recalc H delay and scale registers
+	value = (width * norm_hdelay(core->tvnorm)) / swidth;
+	value &= 0x3fe;
+	cx_write(MO_HDELAY_EVEN,  value);
+	cx_write(MO_HDELAY_ODD,   value);
+	dprintk(1, "set_scale: hdelay  0x%04x (width %d)\n", value, swidth);
+
+	value = (swidth * 4096 / width) - 4096;
+	cx_write(MO_HSCALE_EVEN,  value);
+	cx_write(MO_HSCALE_ODD,   value);
+	dprintk(1, "set_scale: hscale  0x%04x\n", value);
+
+	cx_write(MO_HACTIVE_EVEN, width);
+	cx_write(MO_HACTIVE_ODD,  width);
+	dprintk(1, "set_scale: hactive 0x%04x\n", width);
+
+	// recalc V scale Register (delay is constant)
+	cx_write(MO_VDELAY_EVEN, norm_vdelay(core->tvnorm));
+	cx_write(MO_VDELAY_ODD,  norm_vdelay(core->tvnorm));
+	dprintk(1, "set_scale: vdelay  0x%04x\n", norm_vdelay(core->tvnorm));
+
+	value = (0x10000 - (sheight * 512 / height - 512)) & 0x1fff;
+	cx_write(MO_VSCALE_EVEN,  value);
+	cx_write(MO_VSCALE_ODD,   value);
+	dprintk(1, "set_scale: vscale  0x%04x\n", value);
+
+	cx_write(MO_VACTIVE_EVEN, sheight);
+	cx_write(MO_VACTIVE_ODD,  sheight);
+	dprintk(1, "set_scale: vactive 0x%04x\n", sheight);
+
+	// setup filters
+	value = 0;
+	value |= (1 << 19);        // CFILT (default)
+	if (core->tvnorm & V4L2_STD_SECAM) {
+		value |= (1 << 15);
+		value |= (1 << 16);
+	}
+	if (INPUT(core->input).type == CX88_VMUX_SVIDEO)
+		value |= (1 << 13) | (1 << 5);
+	if (field == V4L2_FIELD_INTERLACED)
+		value |= (1 << 3); // VINT (interlaced vertical scaling)
+	if (width < 385)
+		value |= (1 << 0); // 3-tap interpolation
+	if (width < 193)
+		value |= (1 << 1); // 5-tap interpolation
+	if (nocomb)
+		value |= (3 << 5); // disable comb filter
+
+	cx_andor(MO_FILTER_EVEN,  0x7ffc7f, value); /* preserve PEAKEN, PSEL */
+	cx_andor(MO_FILTER_ODD,   0x7ffc7f, value);
+	dprintk(1, "set_scale: filter  0x%04x\n", value);
+
+	return 0;
+}
+EXPORT_SYMBOL(cx88_set_scale);
+
+static const u32 xtal = 28636363;
+
+static int set_pll(struct cx88_core *core, int prescale, u32 ofreq)
+{
+	static const u32 pre[] = { 0, 0, 0, 3, 2, 1 };
+	u64 pll;
+	u32 reg;
+	int i;
+
+	if (prescale < 2)
+		prescale = 2;
+	if (prescale > 5)
+		prescale = 5;
+
+	pll = ofreq * 8 * prescale * (u64)(1 << 20);
+	do_div(pll, xtal);
+	reg = (pll & 0x3ffffff) | (pre[prescale] << 26);
+	if (((reg >> 20) & 0x3f) < 14) {
+		pr_err("pll out of range\n");
+		return -1;
+	}
+
+	dprintk(1, "set_pll:    MO_PLL_REG       0x%08x [old=0x%08x,freq=%d]\n",
+		reg, cx_read(MO_PLL_REG), ofreq);
+	cx_write(MO_PLL_REG, reg);
+	for (i = 0; i < 100; i++) {
+		reg = cx_read(MO_DEVICE_STATUS);
+		if (reg & (1 << 2)) {
+			dprintk(1, "pll locked [pre=%d,ofreq=%d]\n",
+				prescale, ofreq);
+			return 0;
+		}
+		dprintk(1, "pll not locked yet, waiting ...\n");
+		usleep_range(10000, 20000);
+	}
+	dprintk(1, "pll NOT locked [pre=%d,ofreq=%d]\n", prescale, ofreq);
+	return -1;
+}
+
+int cx88_start_audio_dma(struct cx88_core *core)
+{
+	/* constant 128 made buzz in analog Nicam-stereo for bigger fifo_size */
+	int bpl = cx88_sram_channels[SRAM_CH25].fifo_size / 4;
+
+	int rds_bpl = cx88_sram_channels[SRAM_CH27].fifo_size / AUD_RDS_LINES;
+
+	/* If downstream RISC is enabled, bail out; ALSA is managing DMA */
+	if (cx_read(MO_AUD_DMACNTRL) & 0x10)
+		return 0;
+
+	/* setup fifo + format */
+	cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH25], bpl, 0);
+	cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH26], bpl, 0);
+	cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH27],
+				rds_bpl, 0);
+
+	cx_write(MO_AUDD_LNGTH, bpl); /* fifo bpl size */
+	cx_write(MO_AUDR_LNGTH, rds_bpl); /* fifo bpl size */
+
+	/* enable Up, Down and Audio RDS fifo */
+	cx_write(MO_AUD_DMACNTRL, 0x0007);
+
+	return 0;
+}
+
+int cx88_stop_audio_dma(struct cx88_core *core)
+{
+	/* If downstream RISC is enabled, bail out; ALSA is managing DMA */
+	if (cx_read(MO_AUD_DMACNTRL) & 0x10)
+		return 0;
+
+	/* stop dma */
+	cx_write(MO_AUD_DMACNTRL, 0x0000);
+
+	return 0;
+}
+
+static int set_tvaudio(struct cx88_core *core)
+{
+	v4l2_std_id norm = core->tvnorm;
+
+	if (INPUT(core->input).type != CX88_VMUX_TELEVISION &&
+	    INPUT(core->input).type != CX88_VMUX_CABLE)
+		return 0;
+
+	if (V4L2_STD_PAL_BG & norm) {
+		core->tvaudio = WW_BG;
+
+	} else if (V4L2_STD_PAL_DK & norm) {
+		core->tvaudio = WW_DK;
+
+	} else if (V4L2_STD_PAL_I & norm) {
+		core->tvaudio = WW_I;
+
+	} else if (V4L2_STD_SECAM_L & norm) {
+		core->tvaudio = WW_L;
+
+	} else if ((V4L2_STD_SECAM_B | V4L2_STD_SECAM_G | V4L2_STD_SECAM_H) &
+		   norm) {
+		core->tvaudio = WW_BG;
+
+	} else if (V4L2_STD_SECAM_DK & norm) {
+		core->tvaudio = WW_DK;
+
+	} else if ((V4L2_STD_NTSC_M | V4L2_STD_PAL_M | V4L2_STD_PAL_Nc) &
+		   norm) {
+		core->tvaudio = WW_BTSC;
+
+	} else if (V4L2_STD_NTSC_M_JP & norm) {
+		core->tvaudio = WW_EIAJ;
+
+	} else {
+		pr_info("tvaudio support needs work for this tv norm [%s], sorry\n",
+			v4l2_norm_to_name(core->tvnorm));
+		core->tvaudio = WW_NONE;
+		return 0;
+	}
+
+	cx_andor(MO_AFECFG_IO, 0x1f, 0x0);
+	cx88_set_tvaudio(core);
+	/* cx88_set_stereo(dev,V4L2_TUNER_MODE_STEREO); */
+
+/*
+ * This should be needed only on cx88-alsa. It seems that some cx88 chips have
+ * bugs and does require DMA enabled for it to work.
+ */
+	cx88_start_audio_dma(core);
+	return 0;
+}
+
+int cx88_set_tvnorm(struct cx88_core *core, v4l2_std_id norm)
+{
+	u32 fsc8;
+	u32 adc_clock;
+	u32 vdec_clock;
+	u32 step_db, step_dr;
+	u64 tmp64;
+	u32 bdelay, agcdelay, htotal;
+	u32 cxiformat, cxoformat;
+
+	if (norm == core->tvnorm)
+		return 0;
+	if (core->v4ldev && (vb2_is_busy(&core->v4ldev->vb2_vidq) ||
+			     vb2_is_busy(&core->v4ldev->vb2_vbiq)))
+		return -EBUSY;
+	if (core->dvbdev && vb2_is_busy(&core->dvbdev->vb2_mpegq))
+		return -EBUSY;
+	core->tvnorm = norm;
+	fsc8       = norm_fsc8(norm);
+	adc_clock  = xtal;
+	vdec_clock = fsc8;
+	step_db    = fsc8;
+	step_dr    = fsc8;
+
+	if (norm & V4L2_STD_NTSC_M_JP) {
+		cxiformat = VideoFormatNTSCJapan;
+		cxoformat = 0x181f0008;
+	} else if (norm & V4L2_STD_NTSC_443) {
+		cxiformat = VideoFormatNTSC443;
+		cxoformat = 0x181f0008;
+	} else if (norm & V4L2_STD_PAL_M) {
+		cxiformat = VideoFormatPALM;
+		cxoformat = 0x1c1f0008;
+	} else if (norm & V4L2_STD_PAL_N) {
+		cxiformat = VideoFormatPALN;
+		cxoformat = 0x1c1f0008;
+	} else if (norm & V4L2_STD_PAL_Nc) {
+		cxiformat = VideoFormatPALNC;
+		cxoformat = 0x1c1f0008;
+	} else if (norm & V4L2_STD_PAL_60) {
+		cxiformat = VideoFormatPAL60;
+		cxoformat = 0x181f0008;
+	} else if (norm & V4L2_STD_NTSC) {
+		cxiformat = VideoFormatNTSC;
+		cxoformat = 0x181f0008;
+	} else if (norm & V4L2_STD_SECAM) {
+		step_db = 4250000 * 8;
+		step_dr = 4406250 * 8;
+
+		cxiformat = VideoFormatSECAM;
+		cxoformat = 0x181f0008;
+	} else { /* PAL */
+		cxiformat = VideoFormatPAL;
+		cxoformat = 0x181f0008;
+	}
+
+	dprintk(1, "set_tvnorm: \"%s\" fsc8=%d adc=%d vdec=%d db/dr=%d/%d\n",
+		v4l2_norm_to_name(core->tvnorm), fsc8, adc_clock, vdec_clock,
+		step_db, step_dr);
+	set_pll(core, 2, vdec_clock);
+
+	dprintk(1, "set_tvnorm: MO_INPUT_FORMAT  0x%08x [old=0x%08x]\n",
+		cxiformat, cx_read(MO_INPUT_FORMAT) & 0x0f);
+	/*
+	 * Chroma AGC must be disabled if SECAM is used, we enable it
+	 * by default on PAL and NTSC
+	 */
+	cx_andor(MO_INPUT_FORMAT, 0x40f,
+		 norm & V4L2_STD_SECAM ? cxiformat : cxiformat | 0x400);
+
+	// FIXME: as-is from DScaler
+	dprintk(1, "set_tvnorm: MO_OUTPUT_FORMAT 0x%08x [old=0x%08x]\n",
+		cxoformat, cx_read(MO_OUTPUT_FORMAT));
+	cx_write(MO_OUTPUT_FORMAT, cxoformat);
+
+	// MO_SCONV_REG = adc clock / video dec clock * 2^17
+	tmp64  = adc_clock * (u64)(1 << 17);
+	do_div(tmp64, vdec_clock);
+	dprintk(1, "set_tvnorm: MO_SCONV_REG     0x%08x [old=0x%08x]\n",
+		(u32)tmp64, cx_read(MO_SCONV_REG));
+	cx_write(MO_SCONV_REG, (u32)tmp64);
+
+	// MO_SUB_STEP = 8 * fsc / video dec clock * 2^22
+	tmp64  = step_db * (u64)(1 << 22);
+	do_div(tmp64, vdec_clock);
+	dprintk(1, "set_tvnorm: MO_SUB_STEP      0x%08x [old=0x%08x]\n",
+		(u32)tmp64, cx_read(MO_SUB_STEP));
+	cx_write(MO_SUB_STEP, (u32)tmp64);
+
+	// MO_SUB_STEP_DR = 8 * 4406250 / video dec clock * 2^22
+	tmp64  = step_dr * (u64)(1 << 22);
+	do_div(tmp64, vdec_clock);
+	dprintk(1, "set_tvnorm: MO_SUB_STEP_DR   0x%08x [old=0x%08x]\n",
+		(u32)tmp64, cx_read(MO_SUB_STEP_DR));
+	cx_write(MO_SUB_STEP_DR, (u32)tmp64);
+
+	// bdelay + agcdelay
+	bdelay   = vdec_clock * 65 / 20000000 + 21;
+	agcdelay = vdec_clock * 68 / 20000000 + 15;
+	dprintk(1,
+		"set_tvnorm: MO_AGC_BURST     0x%08x [old=0x%08x,bdelay=%d,agcdelay=%d]\n",
+		(bdelay << 8) | agcdelay, cx_read(MO_AGC_BURST),
+		bdelay, agcdelay);
+	cx_write(MO_AGC_BURST, (bdelay << 8) | agcdelay);
+
+	// htotal
+	tmp64 = norm_htotal(norm) * (u64)vdec_clock;
+	do_div(tmp64, fsc8);
+	htotal = (u32)tmp64;
+	dprintk(1,
+		"set_tvnorm: MO_HTOTAL        0x%08x [old=0x%08x,htotal=%d]\n",
+		htotal, cx_read(MO_HTOTAL), (u32)tmp64);
+	cx_andor(MO_HTOTAL, 0x07ff, htotal);
+
+	// vbi stuff, set vbi offset to 10 (for 20 Clk*2 pixels), this makes
+	// the effective vbi offset ~244 samples, the same as the Bt8x8
+	cx_write(MO_VBI_PACKET, (10 << 11) | norm_vbipack(norm));
+
+	// this is needed as well to set all tvnorm parameter
+	cx88_set_scale(core, 320, 240, V4L2_FIELD_INTERLACED);
+
+	// audio
+	set_tvaudio(core);
+
+	// tell i2c chips
+	call_all(core, video, s_std, norm);
+
+	/*
+	 * The chroma_agc control should be inaccessible
+	 * if the video format is SECAM
+	 */
+	v4l2_ctrl_grab(core->chroma_agc, cxiformat == VideoFormatSECAM);
+
+	// done
+	return 0;
+}
+EXPORT_SYMBOL(cx88_set_tvnorm);
+
+/* ------------------------------------------------------------------ */
+
+void cx88_vdev_init(struct cx88_core *core,
+		    struct pci_dev *pci,
+		    struct video_device *vfd,
+		    const struct video_device *template_,
+		    const char *type)
+{
+	*vfd = *template_;
+
+	/*
+	 * The dev pointer of v4l2_device is NULL, instead we set the
+	 * video_device dev_parent pointer to the correct PCI bus device.
+	 * This driver is a rare example where there is one v4l2_device,
+	 * but the video nodes have different parent (PCI) devices.
+	 */
+	vfd->v4l2_dev = &core->v4l2_dev;
+	vfd->dev_parent = &pci->dev;
+	vfd->release = video_device_release_empty;
+	vfd->lock = &core->lock;
+	snprintf(vfd->name, sizeof(vfd->name), "%s %s (%s)",
+		 core->name, type, core->board.name);
+}
+EXPORT_SYMBOL(cx88_vdev_init);
+
+struct cx88_core *cx88_core_get(struct pci_dev *pci)
+{
+	struct cx88_core *core;
+
+	mutex_lock(&devlist);
+	list_for_each_entry(core, &cx88_devlist, devlist) {
+		if (pci->bus->number != core->pci_bus)
+			continue;
+		if (PCI_SLOT(pci->devfn) != core->pci_slot)
+			continue;
+
+		if (cx88_get_resources(core, pci) != 0) {
+			mutex_unlock(&devlist);
+			return NULL;
+		}
+		refcount_inc(&core->refcount);
+		mutex_unlock(&devlist);
+		return core;
+	}
+
+	core = cx88_core_create(pci, cx88_devcount);
+	if (core) {
+		cx88_devcount++;
+		list_add_tail(&core->devlist, &cx88_devlist);
+	}
+
+	mutex_unlock(&devlist);
+	return core;
+}
+EXPORT_SYMBOL(cx88_core_get);
+
+void cx88_core_put(struct cx88_core *core, struct pci_dev *pci)
+{
+	release_mem_region(pci_resource_start(pci, 0),
+			   pci_resource_len(pci, 0));
+
+	if (!refcount_dec_and_test(&core->refcount))
+		return;
+
+	mutex_lock(&devlist);
+	cx88_ir_fini(core);
+	if (core->i2c_rc == 0) {
+		i2c_unregister_device(core->i2c_rtc);
+		i2c_del_adapter(&core->i2c_adap);
+	}
+	list_del(&core->devlist);
+	iounmap(core->lmmio);
+	cx88_devcount--;
+	mutex_unlock(&devlist);
+	v4l2_ctrl_handler_free(&core->video_hdl);
+	v4l2_ctrl_handler_free(&core->audio_hdl);
+	v4l2_device_unregister(&core->v4l2_dev);
+	kfree(core);
+}
+EXPORT_SYMBOL(cx88_core_put);
diff --git a/drivers/media/pci/cx88/cx88-dsp.c b/drivers/media/pci/cx88/cx88-dsp.c
new file mode 100644
index 000000000..e378f3b21
--- /dev/null
+++ b/drivers/media/pci/cx88/cx88-dsp.c
@@ -0,0 +1,323 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Stereo and SAP detection for cx88
+ *
+ *  Copyright (c) 2009 Marton Balint <cus@fazekas.hu>
+ */
+
+#include "cx88.h"
+#include "cx88-reg.h"
+
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/jiffies.h>
+#include <asm/div64.h>
+
+#define INT_PI			((s32)(3.141592653589 * 32768.0))
+
+#define compat_remainder(a, b) \
+	 ((float)(((s32)((a) * 100)) % ((s32)((b) * 100))) / 100.0)
+
+#define baseband_freq(carrier, srate, tone) ((s32)( \
+	 (compat_remainder(carrier + tone, srate)) / srate * 2 * INT_PI))
+
+/*
+ * We calculate the baseband frequencies of the carrier and the pilot tones
+ * based on the sampling rate of the audio rds fifo.
+ */
+
+#define FREQ_A2_CARRIER         baseband_freq(54687.5, 2689.36, 0.0)
+#define FREQ_A2_DUAL            baseband_freq(54687.5, 2689.36, 274.1)
+#define FREQ_A2_STEREO          baseband_freq(54687.5, 2689.36, 117.5)
+
+/*
+ * The frequencies below are from the reference driver. They probably need
+ * further adjustments, because they are not tested at all. You may even need
+ * to play a bit with the registers of the chip to select the proper signal
+ * for the input of the audio rds fifo, and measure it's sampling rate to
+ * calculate the proper baseband frequencies...
+ */
+
+#define FREQ_A2M_CARRIER	((s32)(2.114516 * 32768.0))
+#define FREQ_A2M_DUAL		((s32)(2.754916 * 32768.0))
+#define FREQ_A2M_STEREO		((s32)(2.462326 * 32768.0))
+
+#define FREQ_EIAJ_CARRIER	((s32)(1.963495 * 32768.0)) /* 5pi/8  */
+#define FREQ_EIAJ_DUAL		((s32)(2.562118 * 32768.0))
+#define FREQ_EIAJ_STEREO	((s32)(2.601053 * 32768.0))
+
+#define FREQ_BTSC_DUAL		((s32)(1.963495 * 32768.0)) /* 5pi/8  */
+#define FREQ_BTSC_DUAL_REF	((s32)(1.374446 * 32768.0)) /* 7pi/16 */
+
+#define FREQ_BTSC_SAP		((s32)(2.471532 * 32768.0))
+#define FREQ_BTSC_SAP_REF	((s32)(1.730072 * 32768.0))
+
+/* The spectrum of the signal should be empty between these frequencies. */
+#define FREQ_NOISE_START	((s32)(0.100000 * 32768.0))
+#define FREQ_NOISE_END		((s32)(1.200000 * 32768.0))
+
+static unsigned int dsp_debug;
+module_param(dsp_debug, int, 0644);
+MODULE_PARM_DESC(dsp_debug, "enable audio dsp debug messages");
+
+#define dprintk(level, fmt, arg...) do {				\
+	if (dsp_debug >= level)						\
+		printk(KERN_DEBUG pr_fmt("%s: dsp:" fmt),		\
+			__func__, ##arg);				\
+} while (0)
+
+static s32 int_cos(u32 x)
+{
+	u32 t2, t4, t6, t8;
+	s32 ret;
+	u16 period = x / INT_PI;
+
+	if (period % 2)
+		return -int_cos(x - INT_PI);
+	x = x % INT_PI;
+	if (x > INT_PI / 2)
+		return -int_cos(INT_PI / 2 - (x % (INT_PI / 2)));
+	/*
+	 * Now x is between 0 and INT_PI/2.
+	 * To calculate cos(x) we use it's Taylor polinom.
+	 */
+	t2 = x * x / 32768 / 2;
+	t4 = t2 * x / 32768 * x / 32768 / 3 / 4;
+	t6 = t4 * x / 32768 * x / 32768 / 5 / 6;
+	t8 = t6 * x / 32768 * x / 32768 / 7 / 8;
+	ret = 32768 - t2 + t4 - t6 + t8;
+	return ret;
+}
+
+static u32 int_goertzel(s16 x[], u32 N, u32 freq)
+{
+	/*
+	 * We use the Goertzel algorithm to determine the power of the
+	 * given frequency in the signal
+	 */
+	s32 s_prev = 0;
+	s32 s_prev2 = 0;
+	s32 coeff = 2 * int_cos(freq);
+	u32 i;
+
+	u64 tmp;
+	u32 divisor;
+
+	for (i = 0; i < N; i++) {
+		s32 s = x[i] + ((s64)coeff * s_prev / 32768) - s_prev2;
+
+		s_prev2 = s_prev;
+		s_prev = s;
+	}
+
+	tmp = (s64)s_prev2 * s_prev2 + (s64)s_prev * s_prev -
+		      (s64)coeff * s_prev2 * s_prev / 32768;
+
+	/*
+	 * XXX: N must be low enough so that N*N fits in s32.
+	 * Else we need two divisions.
+	 */
+	divisor = N * N;
+	do_div(tmp, divisor);
+
+	return (u32)tmp;
+}
+
+static u32 freq_magnitude(s16 x[], u32 N, u32 freq)
+{
+	u32 sum = int_goertzel(x, N, freq);
+
+	return (u32)int_sqrt(sum);
+}
+
+static u32 noise_magnitude(s16 x[], u32 N, u32 freq_start, u32 freq_end)
+{
+	int i;
+	u32 sum = 0;
+	u32 freq_step;
+	int samples = 5;
+
+	if (N > 192) {
+		/* The last 192 samples are enough for noise detection */
+		x += (N - 192);
+		N = 192;
+	}
+
+	freq_step = (freq_end - freq_start) / (samples - 1);
+
+	for (i = 0; i < samples; i++) {
+		sum += int_goertzel(x, N, freq_start);
+		freq_start += freq_step;
+	}
+
+	return (u32)int_sqrt(sum / samples);
+}
+
+static s32 detect_a2_a2m_eiaj(struct cx88_core *core, s16 x[], u32 N)
+{
+	s32 carrier, stereo, dual, noise;
+	s32 carrier_freq, stereo_freq, dual_freq;
+	s32 ret;
+
+	switch (core->tvaudio) {
+	case WW_BG:
+	case WW_DK:
+		carrier_freq = FREQ_A2_CARRIER;
+		stereo_freq = FREQ_A2_STEREO;
+		dual_freq = FREQ_A2_DUAL;
+		break;
+	case WW_M:
+		carrier_freq = FREQ_A2M_CARRIER;
+		stereo_freq = FREQ_A2M_STEREO;
+		dual_freq = FREQ_A2M_DUAL;
+		break;
+	case WW_EIAJ:
+		carrier_freq = FREQ_EIAJ_CARRIER;
+		stereo_freq = FREQ_EIAJ_STEREO;
+		dual_freq = FREQ_EIAJ_DUAL;
+		break;
+	default:
+		pr_warn("unsupported audio mode %d for %s\n",
+			core->tvaudio, __func__);
+		return UNSET;
+	}
+
+	carrier = freq_magnitude(x, N, carrier_freq);
+	stereo  = freq_magnitude(x, N, stereo_freq);
+	dual    = freq_magnitude(x, N, dual_freq);
+	noise   = noise_magnitude(x, N, FREQ_NOISE_START, FREQ_NOISE_END);
+
+	dprintk(1,
+		"detect a2/a2m/eiaj: carrier=%d, stereo=%d, dual=%d, noise=%d\n",
+		carrier, stereo, dual, noise);
+
+	if (stereo > dual)
+		ret = V4L2_TUNER_SUB_STEREO;
+	else
+		ret = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
+
+	if (core->tvaudio == WW_EIAJ) {
+		/* EIAJ checks may need adjustments */
+		if ((carrier > max(stereo, dual) * 2) &&
+		    (carrier < max(stereo, dual) * 6) &&
+		    (carrier > 20 && carrier < 200) &&
+		    (max(stereo, dual) > min(stereo, dual))) {
+			/*
+			 * For EIAJ the carrier is always present,
+			 * so we probably don't need noise detection
+			 */
+			return ret;
+		}
+	} else {
+		if ((carrier > max(stereo, dual) * 2) &&
+		    (carrier < max(stereo, dual) * 8) &&
+		    (carrier > 20 && carrier < 200) &&
+		    (noise < 10) &&
+		    (max(stereo, dual) > min(stereo, dual) * 2)) {
+			return ret;
+		}
+	}
+	return V4L2_TUNER_SUB_MONO;
+}
+
+static s32 detect_btsc(struct cx88_core *core, s16 x[], u32 N)
+{
+	s32 sap_ref = freq_magnitude(x, N, FREQ_BTSC_SAP_REF);
+	s32 sap = freq_magnitude(x, N, FREQ_BTSC_SAP);
+	s32 dual_ref = freq_magnitude(x, N, FREQ_BTSC_DUAL_REF);
+	s32 dual = freq_magnitude(x, N, FREQ_BTSC_DUAL);
+
+	dprintk(1, "detect btsc: dual_ref=%d, dual=%d, sap_ref=%d, sap=%d\n",
+		dual_ref, dual, sap_ref, sap);
+	/* FIXME: Currently not supported */
+	return UNSET;
+}
+
+static s16 *read_rds_samples(struct cx88_core *core, u32 *N)
+{
+	const struct sram_channel *srch = &cx88_sram_channels[SRAM_CH27];
+	s16 *samples;
+
+	unsigned int i;
+	unsigned int bpl = srch->fifo_size / AUD_RDS_LINES;
+	unsigned int spl = bpl / 4;
+	unsigned int sample_count = spl * (AUD_RDS_LINES - 1);
+
+	u32 current_address = cx_read(srch->ptr1_reg);
+	u32 offset = (current_address - srch->fifo_start + bpl);
+
+	dprintk(1,
+		"read RDS samples: current_address=%08x (offset=%08x), sample_count=%d, aud_intstat=%08x\n",
+		current_address,
+		current_address - srch->fifo_start, sample_count,
+		cx_read(MO_AUD_INTSTAT));
+	samples = kmalloc_array(sample_count, sizeof(*samples), GFP_KERNEL);
+	if (!samples)
+		return NULL;
+
+	*N = sample_count;
+
+	for (i = 0; i < sample_count; i++)  {
+		offset = offset % (AUD_RDS_LINES * bpl);
+		samples[i] = cx_read(srch->fifo_start + offset);
+		offset += 4;
+	}
+
+	dprintk(2, "RDS samples dump: %*ph\n", sample_count, samples);
+
+	return samples;
+}
+
+s32 cx88_dsp_detect_stereo_sap(struct cx88_core *core)
+{
+	s16 *samples;
+	u32 N = 0;
+	s32 ret = UNSET;
+
+	/* If audio RDS fifo is disabled, we can't read the samples */
+	if (!(cx_read(MO_AUD_DMACNTRL) & 0x04))
+		return ret;
+	if (!(cx_read(AUD_CTL) & EN_FMRADIO_EN_RDS))
+		return ret;
+
+	/* Wait at least 500 ms after an audio standard change */
+	if (time_before(jiffies, core->last_change + msecs_to_jiffies(500)))
+		return ret;
+
+	samples = read_rds_samples(core, &N);
+
+	if (!samples)
+		return ret;
+
+	switch (core->tvaudio) {
+	case WW_BG:
+	case WW_DK:
+	case WW_EIAJ:
+	case WW_M:
+		ret = detect_a2_a2m_eiaj(core, samples, N);
+		break;
+	case WW_BTSC:
+		ret = detect_btsc(core, samples, N);
+		break;
+	case WW_NONE:
+	case WW_I:
+	case WW_L:
+	case WW_I2SPT:
+	case WW_FM:
+	case WW_I2SADC:
+		break;
+	}
+
+	kfree(samples);
+
+	if (ret != UNSET)
+		dprintk(1, "stereo/sap detection result:%s%s%s\n",
+			(ret & V4L2_TUNER_SUB_MONO) ? " mono" : "",
+			(ret & V4L2_TUNER_SUB_STEREO) ? " stereo" : "",
+			(ret & V4L2_TUNER_SUB_LANG2) ? " dual" : "");
+
+	return ret;
+}
+EXPORT_SYMBOL(cx88_dsp_detect_stereo_sap);
+
diff --git a/drivers/media/pci/cx88/cx88-dvb.c b/drivers/media/pci/cx88/cx88-dvb.c
new file mode 100644
index 000000000..2087f2491
--- /dev/null
+++ b/drivers/media/pci/cx88/cx88-dvb.c
@@ -0,0 +1,1844 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * device driver for Conexant 2388x based TV cards
+ * MPEG Transport Stream (DVB) routines
+ *
+ * (c) 2004, 2005 Chris Pascoe <c.pascoe@itee.uq.edu.au>
+ * (c) 2004 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
+ */
+
+#include "cx88.h"
+#include "dvb-pll.h"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/fs.h>
+#include <linux/kthread.h>
+#include <linux/file.h>
+#include <linux/suspend.h>
+
+#include <media/v4l2-common.h>
+
+#include "mt352.h"
+#include "mt352_priv.h"
+#include "cx88-vp3054-i2c.h"
+#include "zl10353.h"
+#include "cx22702.h"
+#include "or51132.h"
+#include "lgdt330x.h"
+#include "s5h1409.h"
+#include "xc4000.h"
+#include "xc5000.h"
+#include "nxt200x.h"
+#include "cx24123.h"
+#include "isl6421.h"
+#include "tuner-simple.h"
+#include "tda9887.h"
+#include "s5h1411.h"
+#include "stv0299.h"
+#include "z0194a.h"
+#include "stv0288.h"
+#include "stb6000.h"
+#include "cx24116.h"
+#include "stv0900.h"
+#include "stb6100.h"
+#include "stb6100_proc.h"
+#include "mb86a16.h"
+#include "ts2020.h"
+#include "ds3000.h"
+
+MODULE_DESCRIPTION("driver for cx2388x based DVB cards");
+MODULE_AUTHOR("Chris Pascoe <c.pascoe@itee.uq.edu.au>");
+MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(CX88_VERSION);
+
+static unsigned int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "enable debug messages [dvb]");
+
+static unsigned int dvb_buf_tscnt = 32;
+module_param(dvb_buf_tscnt, int, 0644);
+MODULE_PARM_DESC(dvb_buf_tscnt, "DVB Buffer TS count [dvb]");
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+#define dprintk(level, fmt, arg...) do {				\
+	if (debug >= level)						\
+		printk(KERN_DEBUG pr_fmt("%s: dvb:" fmt),		\
+			__func__, ##arg);				\
+} while (0)
+
+/* ------------------------------------------------------------------ */
+
+static int queue_setup(struct vb2_queue *q,
+		       unsigned int *num_buffers, unsigned int *num_planes,
+		       unsigned int sizes[], struct device *alloc_devs[])
+{
+	struct cx8802_dev *dev = q->drv_priv;
+
+	*num_planes = 1;
+	dev->ts_packet_size  = 188 * 4;
+	dev->ts_packet_count = dvb_buf_tscnt;
+	sizes[0] = dev->ts_packet_size * dev->ts_packet_count;
+	*num_buffers = dvb_buf_tscnt;
+	return 0;
+}
+
+static int buffer_prepare(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct cx8802_dev *dev = vb->vb2_queue->drv_priv;
+	struct cx88_buffer *buf = container_of(vbuf, struct cx88_buffer, vb);
+
+	return cx8802_buf_prepare(vb->vb2_queue, dev, buf);
+}
+
+static void buffer_finish(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct cx8802_dev *dev = vb->vb2_queue->drv_priv;
+	struct cx88_buffer *buf = container_of(vbuf, struct cx88_buffer, vb);
+	struct cx88_riscmem *risc = &buf->risc;
+
+	if (risc->cpu)
+		dma_free_coherent(&dev->pci->dev, risc->size, risc->cpu,
+				  risc->dma);
+	memset(risc, 0, sizeof(*risc));
+}
+
+static void buffer_queue(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct cx8802_dev *dev = vb->vb2_queue->drv_priv;
+	struct cx88_buffer    *buf = container_of(vbuf, struct cx88_buffer, vb);
+
+	cx8802_buf_queue(dev, buf);
+}
+
+static int start_streaming(struct vb2_queue *q, unsigned int count)
+{
+	struct cx8802_dev *dev = q->drv_priv;
+	struct cx88_dmaqueue *dmaq = &dev->mpegq;
+	struct cx88_buffer *buf;
+
+	buf = list_entry(dmaq->active.next, struct cx88_buffer, list);
+	cx8802_start_dma(dev, dmaq, buf);
+	return 0;
+}
+
+static void stop_streaming(struct vb2_queue *q)
+{
+	struct cx8802_dev *dev = q->drv_priv;
+	struct cx88_dmaqueue *dmaq = &dev->mpegq;
+	unsigned long flags;
+
+	cx8802_cancel_buffers(dev);
+
+	spin_lock_irqsave(&dev->slock, flags);
+	while (!list_empty(&dmaq->active)) {
+		struct cx88_buffer *buf = list_entry(dmaq->active.next,
+			struct cx88_buffer, list);
+
+		list_del(&buf->list);
+		vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+	}
+	spin_unlock_irqrestore(&dev->slock, flags);
+}
+
+static const struct vb2_ops dvb_qops = {
+	.queue_setup    = queue_setup,
+	.buf_prepare  = buffer_prepare,
+	.buf_finish = buffer_finish,
+	.buf_queue    = buffer_queue,
+	.wait_prepare = vb2_ops_wait_prepare,
+	.wait_finish = vb2_ops_wait_finish,
+	.start_streaming = start_streaming,
+	.stop_streaming = stop_streaming,
+};
+
+/* ------------------------------------------------------------------ */
+
+static int cx88_dvb_bus_ctrl(struct dvb_frontend *fe, int acquire)
+{
+	struct cx8802_dev *dev = fe->dvb->priv;
+	struct cx8802_driver *drv = NULL;
+	int ret = 0;
+	int fe_id;
+
+	fe_id = vb2_dvb_find_frontend(&dev->frontends, fe);
+	if (!fe_id) {
+		pr_err("%s() No frontend found\n", __func__);
+		return -EINVAL;
+	}
+
+	mutex_lock(&dev->core->lock);
+	drv = cx8802_get_driver(dev, CX88_MPEG_DVB);
+	if (drv) {
+		if (acquire) {
+			dev->frontends.active_fe_id = fe_id;
+			ret = drv->request_acquire(drv);
+		} else {
+			ret = drv->request_release(drv);
+			dev->frontends.active_fe_id = 0;
+		}
+	}
+	mutex_unlock(&dev->core->lock);
+
+	return ret;
+}
+
+static void cx88_dvb_gate_ctrl(struct cx88_core  *core, int open)
+{
+	struct vb2_dvb_frontends *f;
+	struct vb2_dvb_frontend *fe;
+
+	if (!core->dvbdev)
+		return;
+
+	f = &core->dvbdev->frontends;
+
+	if (!f)
+		return;
+
+	if (f->gate <= 1) /* undefined or fe0 */
+		fe = vb2_dvb_get_frontend(f, 1);
+	else
+		fe = vb2_dvb_get_frontend(f, f->gate);
+
+	if (fe && fe->dvb.frontend && fe->dvb.frontend->ops.i2c_gate_ctrl)
+		fe->dvb.frontend->ops.i2c_gate_ctrl(fe->dvb.frontend, open);
+}
+
+/* ------------------------------------------------------------------ */
+
+static int dvico_fusionhdtv_demod_init(struct dvb_frontend *fe)
+{
+	static const u8 clock_config[]  = { CLOCK_CTL,  0x38, 0x39 };
+	static const u8 reset[]         = { RESET,      0x80 };
+	static const u8 adc_ctl_1_cfg[] = { ADC_CTL_1,  0x40 };
+	static const u8 agc_cfg[]       = { AGC_TARGET, 0x24, 0x20 };
+	static const u8 gpp_ctl_cfg[]   = { GPP_CTL,    0x33 };
+	static const u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 };
+
+	mt352_write(fe, clock_config,   sizeof(clock_config));
+	udelay(200);
+	mt352_write(fe, reset,          sizeof(reset));
+	mt352_write(fe, adc_ctl_1_cfg,  sizeof(adc_ctl_1_cfg));
+
+	mt352_write(fe, agc_cfg,        sizeof(agc_cfg));
+	mt352_write(fe, gpp_ctl_cfg,    sizeof(gpp_ctl_cfg));
+	mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
+	return 0;
+}
+
+static int dvico_dual_demod_init(struct dvb_frontend *fe)
+{
+	static const u8 clock_config[]  = { CLOCK_CTL,  0x38, 0x38 };
+	static const u8 reset[]         = { RESET,      0x80 };
+	static const u8 adc_ctl_1_cfg[] = { ADC_CTL_1,  0x40 };
+	static const u8 agc_cfg[]       = { AGC_TARGET, 0x28, 0x20 };
+	static const u8 gpp_ctl_cfg[]   = { GPP_CTL,    0x33 };
+	static const u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 };
+
+	mt352_write(fe, clock_config,   sizeof(clock_config));
+	udelay(200);
+	mt352_write(fe, reset,          sizeof(reset));
+	mt352_write(fe, adc_ctl_1_cfg,  sizeof(adc_ctl_1_cfg));
+
+	mt352_write(fe, agc_cfg,        sizeof(agc_cfg));
+	mt352_write(fe, gpp_ctl_cfg,    sizeof(gpp_ctl_cfg));
+	mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
+
+	return 0;
+}
+
+static int dntv_live_dvbt_demod_init(struct dvb_frontend *fe)
+{
+	static const u8 clock_config[]  = { 0x89, 0x38, 0x39 };
+	static const u8 reset[]         = { 0x50, 0x80 };
+	static const u8 adc_ctl_1_cfg[] = { 0x8E, 0x40 };
+	static const u8 agc_cfg[]       = { 0x67, 0x10, 0x23, 0x00, 0xFF, 0xFF,
+				       0x00, 0xFF, 0x00, 0x40, 0x40 };
+	static const u8 dntv_extra[]     = { 0xB5, 0x7A };
+	static const u8 capt_range_cfg[] = { 0x75, 0x32 };
+
+	mt352_write(fe, clock_config,   sizeof(clock_config));
+	udelay(2000);
+	mt352_write(fe, reset,          sizeof(reset));
+	mt352_write(fe, adc_ctl_1_cfg,  sizeof(adc_ctl_1_cfg));
+
+	mt352_write(fe, agc_cfg,        sizeof(agc_cfg));
+	udelay(2000);
+	mt352_write(fe, dntv_extra,     sizeof(dntv_extra));
+	mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
+
+	return 0;
+}
+
+static const struct mt352_config dvico_fusionhdtv = {
+	.demod_address = 0x0f,
+	.demod_init    = dvico_fusionhdtv_demod_init,
+};
+
+static const struct mt352_config dntv_live_dvbt_config = {
+	.demod_address = 0x0f,
+	.demod_init    = dntv_live_dvbt_demod_init,
+};
+
+static const struct mt352_config dvico_fusionhdtv_dual = {
+	.demod_address = 0x0f,
+	.demod_init    = dvico_dual_demod_init,
+};
+
+static const struct zl10353_config cx88_terratec_cinergy_ht_pci_mkii_config = {
+	.demod_address = (0x1e >> 1),
+	.no_tuner      = 1,
+	.if2           = 45600,
+};
+
+static const struct mb86a16_config twinhan_vp1027 = {
+	.demod_address  = 0x08,
+};
+
+#if IS_ENABLED(CONFIG_VIDEO_CX88_VP3054)
+static int dntv_live_dvbt_pro_demod_init(struct dvb_frontend *fe)
+{
+	static const u8 clock_config[]  = { 0x89, 0x38, 0x38 };
+	static const u8 reset[]         = { 0x50, 0x80 };
+	static const u8 adc_ctl_1_cfg[] = { 0x8E, 0x40 };
+	static const u8 agc_cfg[]       = { 0x67, 0x10, 0x20, 0x00, 0xFF, 0xFF,
+				       0x00, 0xFF, 0x00, 0x40, 0x40 };
+	static const u8 dntv_extra[]     = { 0xB5, 0x7A };
+	static const u8 capt_range_cfg[] = { 0x75, 0x32 };
+
+	mt352_write(fe, clock_config,   sizeof(clock_config));
+	udelay(2000);
+	mt352_write(fe, reset,          sizeof(reset));
+	mt352_write(fe, adc_ctl_1_cfg,  sizeof(adc_ctl_1_cfg));
+
+	mt352_write(fe, agc_cfg,        sizeof(agc_cfg));
+	udelay(2000);
+	mt352_write(fe, dntv_extra,     sizeof(dntv_extra));
+	mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
+
+	return 0;
+}
+
+static const struct mt352_config dntv_live_dvbt_pro_config = {
+	.demod_address = 0x0f,
+	.no_tuner      = 1,
+	.demod_init    = dntv_live_dvbt_pro_demod_init,
+};
+#endif
+
+static const struct zl10353_config dvico_fusionhdtv_hybrid = {
+	.demod_address = 0x0f,
+	.no_tuner      = 1,
+};
+
+static const struct zl10353_config dvico_fusionhdtv_xc3028 = {
+	.demod_address = 0x0f,
+	.if2           = 45600,
+	.no_tuner      = 1,
+};
+
+static const struct mt352_config dvico_fusionhdtv_mt352_xc3028 = {
+	.demod_address = 0x0f,
+	.if2 = 4560,
+	.no_tuner = 1,
+	.demod_init = dvico_fusionhdtv_demod_init,
+};
+
+static const struct zl10353_config dvico_fusionhdtv_plus_v1_1 = {
+	.demod_address = 0x0f,
+};
+
+static const struct cx22702_config connexant_refboard_config = {
+	.demod_address = 0x43,
+	.output_mode   = CX22702_SERIAL_OUTPUT,
+};
+
+static const struct cx22702_config hauppauge_hvr_config = {
+	.demod_address = 0x63,
+	.output_mode   = CX22702_SERIAL_OUTPUT,
+};
+
+static int or51132_set_ts_param(struct dvb_frontend *fe, int is_punctured)
+{
+	struct cx8802_dev *dev = fe->dvb->priv;
+
+	dev->ts_gen_cntrl = is_punctured ? 0x04 : 0x00;
+	return 0;
+}
+
+static const struct or51132_config pchdtv_hd3000 = {
+	.demod_address = 0x15,
+	.set_ts_params = or51132_set_ts_param,
+};
+
+static int lgdt330x_pll_rf_set(struct dvb_frontend *fe, int index)
+{
+	struct cx8802_dev *dev = fe->dvb->priv;
+	struct cx88_core *core = dev->core;
+
+	dprintk(1, "%s: index = %d\n", __func__, index);
+	if (index == 0)
+		cx_clear(MO_GP0_IO, 8);
+	else
+		cx_set(MO_GP0_IO, 8);
+	return 0;
+}
+
+static int lgdt330x_set_ts_param(struct dvb_frontend *fe, int is_punctured)
+{
+	struct cx8802_dev *dev = fe->dvb->priv;
+
+	if (is_punctured)
+		dev->ts_gen_cntrl |= 0x04;
+	else
+		dev->ts_gen_cntrl &= ~0x04;
+	return 0;
+}
+
+static struct lgdt330x_config fusionhdtv_3_gold = {
+	.demod_chip    = LGDT3302,
+	.serial_mpeg   = 0x04, /* TPSERIAL for 3302 in TOP_CONTROL */
+	.set_ts_params = lgdt330x_set_ts_param,
+};
+
+static const struct lgdt330x_config fusionhdtv_5_gold = {
+	.demod_chip    = LGDT3303,
+	.serial_mpeg   = 0x40, /* TPSERIAL for 3303 in TOP_CONTROL */
+	.set_ts_params = lgdt330x_set_ts_param,
+};
+
+static const struct lgdt330x_config pchdtv_hd5500 = {
+	.demod_chip    = LGDT3303,
+	.serial_mpeg   = 0x40, /* TPSERIAL for 3303 in TOP_CONTROL */
+	.set_ts_params = lgdt330x_set_ts_param,
+};
+
+static int nxt200x_set_ts_param(struct dvb_frontend *fe, int is_punctured)
+{
+	struct cx8802_dev *dev = fe->dvb->priv;
+
+	dev->ts_gen_cntrl = is_punctured ? 0x04 : 0x00;
+	return 0;
+}
+
+static const struct nxt200x_config ati_hdtvwonder = {
+	.demod_address = 0x0a,
+	.set_ts_params = nxt200x_set_ts_param,
+};
+
+static int cx24123_set_ts_param(struct dvb_frontend *fe,
+				int is_punctured)
+{
+	struct cx8802_dev *dev = fe->dvb->priv;
+
+	dev->ts_gen_cntrl = 0x02;
+	return 0;
+}
+
+static int kworld_dvbs_100_set_voltage(struct dvb_frontend *fe,
+				       enum fe_sec_voltage voltage)
+{
+	struct cx8802_dev *dev = fe->dvb->priv;
+	struct cx88_core *core = dev->core;
+
+	if (voltage == SEC_VOLTAGE_OFF)
+		cx_write(MO_GP0_IO, 0x000006fb);
+	else
+		cx_write(MO_GP0_IO, 0x000006f9);
+
+	if (core->prev_set_voltage)
+		return core->prev_set_voltage(fe, voltage);
+	return 0;
+}
+
+static int geniatech_dvbs_set_voltage(struct dvb_frontend *fe,
+				      enum fe_sec_voltage voltage)
+{
+	struct cx8802_dev *dev = fe->dvb->priv;
+	struct cx88_core *core = dev->core;
+
+	if (voltage == SEC_VOLTAGE_OFF) {
+		dprintk(1, "LNB Voltage OFF\n");
+		cx_write(MO_GP0_IO, 0x0000efff);
+	}
+
+	if (core->prev_set_voltage)
+		return core->prev_set_voltage(fe, voltage);
+	return 0;
+}
+
+static int tevii_dvbs_set_voltage(struct dvb_frontend *fe,
+				  enum fe_sec_voltage voltage)
+{
+	struct cx8802_dev *dev = fe->dvb->priv;
+	struct cx88_core *core = dev->core;
+
+	cx_set(MO_GP0_IO, 0x6040);
+	switch (voltage) {
+	case SEC_VOLTAGE_13:
+		cx_clear(MO_GP0_IO, 0x20);
+		break;
+	case SEC_VOLTAGE_18:
+		cx_set(MO_GP0_IO, 0x20);
+		break;
+	case SEC_VOLTAGE_OFF:
+		cx_clear(MO_GP0_IO, 0x20);
+		break;
+	}
+
+	if (core->prev_set_voltage)
+		return core->prev_set_voltage(fe, voltage);
+	return 0;
+}
+
+static int vp1027_set_voltage(struct dvb_frontend *fe,
+			      enum fe_sec_voltage voltage)
+{
+	struct cx8802_dev *dev = fe->dvb->priv;
+	struct cx88_core *core = dev->core;
+
+	switch (voltage) {
+	case SEC_VOLTAGE_13:
+		dprintk(1, "LNB SEC Voltage=13\n");
+		cx_write(MO_GP0_IO, 0x00001220);
+		break;
+	case SEC_VOLTAGE_18:
+		dprintk(1, "LNB SEC Voltage=18\n");
+		cx_write(MO_GP0_IO, 0x00001222);
+		break;
+	case SEC_VOLTAGE_OFF:
+		dprintk(1, "LNB Voltage OFF\n");
+		cx_write(MO_GP0_IO, 0x00001230);
+		break;
+	}
+
+	if (core->prev_set_voltage)
+		return core->prev_set_voltage(fe, voltage);
+	return 0;
+}
+
+static const struct cx24123_config geniatech_dvbs_config = {
+	.demod_address = 0x55,
+	.set_ts_params = cx24123_set_ts_param,
+};
+
+static const struct cx24123_config hauppauge_novas_config = {
+	.demod_address = 0x55,
+	.set_ts_params = cx24123_set_ts_param,
+};
+
+static const struct cx24123_config kworld_dvbs_100_config = {
+	.demod_address = 0x15,
+	.set_ts_params = cx24123_set_ts_param,
+	.lnb_polarity  = 1,
+};
+
+static const struct s5h1409_config pinnacle_pctv_hd_800i_config = {
+	.demod_address = 0x32 >> 1,
+	.output_mode   = S5H1409_PARALLEL_OUTPUT,
+	.gpio	       = S5H1409_GPIO_ON,
+	.qam_if	       = 44000,
+	.inversion     = S5H1409_INVERSION_OFF,
+	.status_mode   = S5H1409_DEMODLOCKING,
+	.mpeg_timing   = S5H1409_MPEGTIMING_NONCONTINUOUS_NONINVERTING_CLOCK,
+};
+
+static const struct s5h1409_config dvico_hdtv5_pci_nano_config = {
+	.demod_address = 0x32 >> 1,
+	.output_mode   = S5H1409_SERIAL_OUTPUT,
+	.gpio          = S5H1409_GPIO_OFF,
+	.inversion     = S5H1409_INVERSION_OFF,
+	.status_mode   = S5H1409_DEMODLOCKING,
+	.mpeg_timing   = S5H1409_MPEGTIMING_CONTINUOUS_NONINVERTING_CLOCK,
+};
+
+static const struct s5h1409_config kworld_atsc_120_config = {
+	.demod_address = 0x32 >> 1,
+	.output_mode   = S5H1409_SERIAL_OUTPUT,
+	.gpio	       = S5H1409_GPIO_OFF,
+	.inversion     = S5H1409_INVERSION_OFF,
+	.status_mode   = S5H1409_DEMODLOCKING,
+	.mpeg_timing   = S5H1409_MPEGTIMING_CONTINUOUS_NONINVERTING_CLOCK,
+};
+
+static const struct xc5000_config pinnacle_pctv_hd_800i_tuner_config = {
+	.i2c_address	= 0x64,
+	.if_khz		= 5380,
+};
+
+static const struct zl10353_config cx88_pinnacle_hybrid_pctv = {
+	.demod_address = (0x1e >> 1),
+	.no_tuner      = 1,
+	.if2           = 45600,
+};
+
+static const struct zl10353_config cx88_geniatech_x8000_mt = {
+	.demod_address = (0x1e >> 1),
+	.no_tuner = 1,
+	.disable_i2c_gate_ctrl = 1,
+};
+
+static const struct s5h1411_config dvico_fusionhdtv7_config = {
+	.output_mode   = S5H1411_SERIAL_OUTPUT,
+	.gpio          = S5H1411_GPIO_ON,
+	.mpeg_timing   = S5H1411_MPEGTIMING_CONTINUOUS_NONINVERTING_CLOCK,
+	.qam_if        = S5H1411_IF_44000,
+	.vsb_if        = S5H1411_IF_44000,
+	.inversion     = S5H1411_INVERSION_OFF,
+	.status_mode   = S5H1411_DEMODLOCKING
+};
+
+static const struct xc5000_config dvico_fusionhdtv7_tuner_config = {
+	.i2c_address    = 0xc2 >> 1,
+	.if_khz         = 5380,
+};
+
+static int attach_xc3028(u8 addr, struct cx8802_dev *dev)
+{
+	struct dvb_frontend *fe;
+	struct vb2_dvb_frontend *fe0 = NULL;
+	struct xc2028_ctrl ctl;
+	struct xc2028_config cfg = {
+		.i2c_adap  = &dev->core->i2c_adap,
+		.i2c_addr  = addr,
+		.ctrl      = &ctl,
+	};
+
+	/* Get the first frontend */
+	fe0 = vb2_dvb_get_frontend(&dev->frontends, 1);
+	if (!fe0)
+		return -EINVAL;
+
+	if (!fe0->dvb.frontend) {
+		pr_err("dvb frontend not attached. Can't attach xc3028\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Some xc3028 devices may be hidden by an I2C gate. This is known
+	 * to happen with some s5h1409-based devices.
+	 * Now that I2C gate is open, sets up xc3028 configuration
+	 */
+	cx88_setup_xc3028(dev->core, &ctl);
+
+	fe = dvb_attach(xc2028_attach, fe0->dvb.frontend, &cfg);
+	if (!fe) {
+		pr_err("xc3028 attach failed\n");
+		dvb_frontend_detach(fe0->dvb.frontend);
+		dvb_unregister_frontend(fe0->dvb.frontend);
+		fe0->dvb.frontend = NULL;
+		return -EINVAL;
+	}
+
+	pr_info("xc3028 attached\n");
+
+	return 0;
+}
+
+static int attach_xc4000(struct cx8802_dev *dev, struct xc4000_config *cfg)
+{
+	struct dvb_frontend *fe;
+	struct vb2_dvb_frontend *fe0 = NULL;
+
+	/* Get the first frontend */
+	fe0 = vb2_dvb_get_frontend(&dev->frontends, 1);
+	if (!fe0)
+		return -EINVAL;
+
+	if (!fe0->dvb.frontend) {
+		pr_err("dvb frontend not attached. Can't attach xc4000\n");
+		return -EINVAL;
+	}
+
+	fe = dvb_attach(xc4000_attach, fe0->dvb.frontend, &dev->core->i2c_adap,
+			cfg);
+	if (!fe) {
+		pr_err("xc4000 attach failed\n");
+		dvb_frontend_detach(fe0->dvb.frontend);
+		dvb_unregister_frontend(fe0->dvb.frontend);
+		fe0->dvb.frontend = NULL;
+		return -EINVAL;
+	}
+
+	pr_info("xc4000 attached\n");
+
+	return 0;
+}
+
+static int cx24116_set_ts_param(struct dvb_frontend *fe,
+				int is_punctured)
+{
+	struct cx8802_dev *dev = fe->dvb->priv;
+
+	dev->ts_gen_cntrl = 0x2;
+
+	return 0;
+}
+
+static int stv0900_set_ts_param(struct dvb_frontend *fe,
+				int is_punctured)
+{
+	struct cx8802_dev *dev = fe->dvb->priv;
+
+	dev->ts_gen_cntrl = 0;
+
+	return 0;
+}
+
+static int cx24116_reset_device(struct dvb_frontend *fe)
+{
+	struct cx8802_dev *dev = fe->dvb->priv;
+	struct cx88_core *core = dev->core;
+
+	/* Reset the part */
+	/* Put the cx24116 into reset */
+	cx_write(MO_SRST_IO, 0);
+	usleep_range(10000, 20000);
+	/* Take the cx24116 out of reset */
+	cx_write(MO_SRST_IO, 1);
+	usleep_range(10000, 20000);
+
+	return 0;
+}
+
+static const struct cx24116_config hauppauge_hvr4000_config = {
+	.demod_address          = 0x05,
+	.set_ts_params          = cx24116_set_ts_param,
+	.reset_device           = cx24116_reset_device,
+};
+
+static const struct cx24116_config tevii_s460_config = {
+	.demod_address = 0x55,
+	.set_ts_params = cx24116_set_ts_param,
+	.reset_device  = cx24116_reset_device,
+};
+
+static int ds3000_set_ts_param(struct dvb_frontend *fe,
+			       int is_punctured)
+{
+	struct cx8802_dev *dev = fe->dvb->priv;
+
+	dev->ts_gen_cntrl = 4;
+
+	return 0;
+}
+
+static struct ds3000_config tevii_ds3000_config = {
+	.demod_address = 0x68,
+	.set_ts_params = ds3000_set_ts_param,
+};
+
+static struct ts2020_config tevii_ts2020_config  = {
+	.tuner_address = 0x60,
+	.clk_out_div = 1,
+};
+
+static const struct stv0900_config prof_7301_stv0900_config = {
+	.demod_address = 0x6a,
+/*	demod_mode = 0,*/
+	.xtal = 27000000,
+	.clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */
+	.diseqc_mode = 2,/* 2/3 PWM */
+	.tun1_maddress = 0,/* 0x60 */
+	.tun1_adc = 0,/* 2 Vpp */
+	.path1_mode = 3,
+	.set_ts_params = stv0900_set_ts_param,
+};
+
+static const struct stb6100_config prof_7301_stb6100_config = {
+	.tuner_address = 0x60,
+	.refclock = 27000000,
+};
+
+static const struct stv0299_config tevii_tuner_sharp_config = {
+	.demod_address = 0x68,
+	.inittab = sharp_z0194a_inittab,
+	.mclk = 88000000UL,
+	.invert = 1,
+	.skip_reinit = 0,
+	.lock_output = 1,
+	.volt13_op0_op1 = STV0299_VOLT13_OP1,
+	.min_delay_ms = 100,
+	.set_symbol_rate = sharp_z0194a_set_symbol_rate,
+	.set_ts_params = cx24116_set_ts_param,
+};
+
+static const struct stv0288_config tevii_tuner_earda_config = {
+	.demod_address = 0x68,
+	.min_delay_ms = 100,
+	.set_ts_params = cx24116_set_ts_param,
+};
+
+static int cx8802_alloc_frontends(struct cx8802_dev *dev)
+{
+	struct cx88_core *core = dev->core;
+	struct vb2_dvb_frontend *fe = NULL;
+	int i;
+
+	mutex_init(&dev->frontends.lock);
+	INIT_LIST_HEAD(&dev->frontends.felist);
+
+	if (!core->board.num_frontends)
+		return -ENODEV;
+
+	pr_info("%s: allocating %d frontend(s)\n", __func__,
+		core->board.num_frontends);
+	for (i = 1; i <= core->board.num_frontends; i++) {
+		fe = vb2_dvb_alloc_frontend(&dev->frontends, i);
+		if (!fe) {
+			pr_err("%s() failed to alloc\n", __func__);
+			vb2_dvb_dealloc_frontends(&dev->frontends);
+			return -ENOMEM;
+		}
+	}
+	return 0;
+}
+
+static const u8 samsung_smt_7020_inittab[] = {
+	     0x01, 0x15,
+	     0x02, 0x00,
+	     0x03, 0x00,
+	     0x04, 0x7D,
+	     0x05, 0x0F,
+	     0x06, 0x02,
+	     0x07, 0x00,
+	     0x08, 0x60,
+
+	     0x0A, 0xC2,
+	     0x0B, 0x00,
+	     0x0C, 0x01,
+	     0x0D, 0x81,
+	     0x0E, 0x44,
+	     0x0F, 0x09,
+	     0x10, 0x3C,
+	     0x11, 0x84,
+	     0x12, 0xDA,
+	     0x13, 0x99,
+	     0x14, 0x8D,
+	     0x15, 0xCE,
+	     0x16, 0xE8,
+	     0x17, 0x43,
+	     0x18, 0x1C,
+	     0x19, 0x1B,
+	     0x1A, 0x1D,
+
+	     0x1C, 0x12,
+	     0x1D, 0x00,
+	     0x1E, 0x00,
+	     0x1F, 0x00,
+	     0x20, 0x00,
+	     0x21, 0x00,
+	     0x22, 0x00,
+	     0x23, 0x00,
+
+	     0x28, 0x02,
+	     0x29, 0x28,
+	     0x2A, 0x14,
+	     0x2B, 0x0F,
+	     0x2C, 0x09,
+	     0x2D, 0x05,
+
+	     0x31, 0x1F,
+	     0x32, 0x19,
+	     0x33, 0xFC,
+	     0x34, 0x13,
+	     0xff, 0xff,
+};
+
+static int samsung_smt_7020_tuner_set_params(struct dvb_frontend *fe)
+{
+	struct dtv_frontend_properties *c = &fe->dtv_property_cache;
+	struct cx8802_dev *dev = fe->dvb->priv;
+	u8 buf[4];
+	u32 div;
+	struct i2c_msg msg = {
+		.addr = 0x61,
+		.flags = 0,
+		.buf = buf,
+		.len = sizeof(buf) };
+
+	div = c->frequency / 125;
+
+	buf[0] = (div >> 8) & 0x7f;
+	buf[1] = div & 0xff;
+	buf[2] = 0x84;  /* 0xC4 */
+	buf[3] = 0x00;
+
+	if (c->frequency < 1500000)
+		buf[3] |= 0x10;
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1);
+
+	if (i2c_transfer(&dev->core->i2c_adap, &msg, 1) != 1)
+		return -EIO;
+
+	return 0;
+}
+
+static int samsung_smt_7020_set_tone(struct dvb_frontend *fe,
+				     enum fe_sec_tone_mode tone)
+{
+	struct cx8802_dev *dev = fe->dvb->priv;
+	struct cx88_core *core = dev->core;
+
+	cx_set(MO_GP0_IO, 0x0800);
+
+	switch (tone) {
+	case SEC_TONE_ON:
+		cx_set(MO_GP0_IO, 0x08);
+		break;
+	case SEC_TONE_OFF:
+		cx_clear(MO_GP0_IO, 0x08);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int samsung_smt_7020_set_voltage(struct dvb_frontend *fe,
+					enum fe_sec_voltage voltage)
+{
+	struct cx8802_dev *dev = fe->dvb->priv;
+	struct cx88_core *core = dev->core;
+
+	u8 data;
+	struct i2c_msg msg = {
+		.addr = 8,
+		.flags = 0,
+		.buf = &data,
+		.len = sizeof(data) };
+
+	cx_set(MO_GP0_IO, 0x8000);
+
+	switch (voltage) {
+	case SEC_VOLTAGE_OFF:
+		break;
+	case SEC_VOLTAGE_13:
+		data = ISL6421_EN1 | ISL6421_LLC1;
+		cx_clear(MO_GP0_IO, 0x80);
+		break;
+	case SEC_VOLTAGE_18:
+		data = ISL6421_EN1 | ISL6421_LLC1 | ISL6421_VSEL1;
+		cx_clear(MO_GP0_IO, 0x80);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return (i2c_transfer(&dev->core->i2c_adap, &msg, 1) == 1) ? 0 : -EIO;
+}
+
+static int samsung_smt_7020_stv0299_set_symbol_rate(struct dvb_frontend *fe,
+						    u32 srate, u32 ratio)
+{
+	u8 aclk = 0;
+	u8 bclk = 0;
+
+	if (srate < 1500000) {
+		aclk = 0xb7;
+		bclk = 0x47;
+	} else if (srate < 3000000) {
+		aclk = 0xb7;
+		bclk = 0x4b;
+	} else if (srate < 7000000) {
+		aclk = 0xb7;
+		bclk = 0x4f;
+	} else if (srate < 14000000) {
+		aclk = 0xb7;
+		bclk = 0x53;
+	} else if (srate < 30000000) {
+		aclk = 0xb6;
+		bclk = 0x53;
+	} else if (srate < 45000000) {
+		aclk = 0xb4;
+		bclk = 0x51;
+	}
+
+	stv0299_writereg(fe, 0x13, aclk);
+	stv0299_writereg(fe, 0x14, bclk);
+	stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
+	stv0299_writereg(fe, 0x20, (ratio >>  8) & 0xff);
+	stv0299_writereg(fe, 0x21, ratio & 0xf0);
+
+	return 0;
+}
+
+static const struct stv0299_config samsung_stv0299_config = {
+	.demod_address = 0x68,
+	.inittab = samsung_smt_7020_inittab,
+	.mclk = 88000000UL,
+	.invert = 0,
+	.skip_reinit = 0,
+	.lock_output = STV0299_LOCKOUTPUT_LK,
+	.volt13_op0_op1 = STV0299_VOLT13_OP1,
+	.min_delay_ms = 100,
+	.set_symbol_rate = samsung_smt_7020_stv0299_set_symbol_rate,
+};
+
+static int dvb_register(struct cx8802_dev *dev)
+{
+	struct cx88_core *core = dev->core;
+	struct vb2_dvb_frontend *fe0, *fe1 = NULL;
+	int mfe_shared = 0; /* bus not shared by default */
+	int res = -EINVAL;
+
+	if (core->i2c_rc != 0) {
+		pr_err("no i2c-bus available, cannot attach dvb drivers\n");
+		goto frontend_detach;
+	}
+
+	/* Get the first frontend */
+	fe0 = vb2_dvb_get_frontend(&dev->frontends, 1);
+	if (!fe0)
+		goto frontend_detach;
+
+	/* multi-frontend gate control is undefined or defaults to fe0 */
+	dev->frontends.gate = 0;
+
+	/* Sets the gate control callback to be used by i2c command calls */
+	core->gate_ctrl = cx88_dvb_gate_ctrl;
+
+	/* init frontend(s) */
+	switch (core->boardnr) {
+	case CX88_BOARD_HAUPPAUGE_DVB_T1:
+		fe0->dvb.frontend = dvb_attach(cx22702_attach,
+					       &connexant_refboard_config,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend,
+					0x61, &core->i2c_adap,
+					DVB_PLL_THOMSON_DTT759X))
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1:
+	case CX88_BOARD_CONEXANT_DVB_T1:
+	case CX88_BOARD_KWORLD_DVB_T_CX22702:
+	case CX88_BOARD_WINFAST_DTV1000:
+		fe0->dvb.frontend = dvb_attach(cx22702_attach,
+					       &connexant_refboard_config,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend,
+					0x60, &core->i2c_adap,
+					DVB_PLL_THOMSON_DTT7579))
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_WINFAST_DTV2000H:
+	case CX88_BOARD_HAUPPAUGE_HVR1100:
+	case CX88_BOARD_HAUPPAUGE_HVR1100LP:
+	case CX88_BOARD_HAUPPAUGE_HVR1300:
+		fe0->dvb.frontend = dvb_attach(cx22702_attach,
+					       &hauppauge_hvr_config,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
+					&core->i2c_adap, 0x61,
+					TUNER_PHILIPS_FMD1216ME_MK3))
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_WINFAST_DTV2000H_J:
+		fe0->dvb.frontend = dvb_attach(cx22702_attach,
+					       &hauppauge_hvr_config,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
+					&core->i2c_adap, 0x61,
+					TUNER_PHILIPS_FMD1216MEX_MK3))
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_HAUPPAUGE_HVR3000:
+		/* MFE frontend 1 */
+		mfe_shared = 1;
+		dev->frontends.gate = 2;
+		/* DVB-S init */
+		fe0->dvb.frontend = dvb_attach(cx24123_attach,
+					       &hauppauge_novas_config,
+					       &dev->core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(isl6421_attach,
+					fe0->dvb.frontend,
+					&dev->core->i2c_adap,
+					0x08, ISL6421_DCL, 0x00, false))
+				goto frontend_detach;
+		}
+		/* MFE frontend 2 */
+		fe1 = vb2_dvb_get_frontend(&dev->frontends, 2);
+		if (!fe1)
+			goto frontend_detach;
+		/* DVB-T init */
+		fe1->dvb.frontend = dvb_attach(cx22702_attach,
+					       &hauppauge_hvr_config,
+					       &dev->core->i2c_adap);
+		if (fe1->dvb.frontend) {
+			fe1->dvb.frontend->id = 1;
+			if (!dvb_attach(simple_tuner_attach,
+					fe1->dvb.frontend,
+					&dev->core->i2c_adap,
+					0x61, TUNER_PHILIPS_FMD1216ME_MK3))
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS:
+		fe0->dvb.frontend = dvb_attach(mt352_attach,
+					       &dvico_fusionhdtv,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend,
+					0x60, NULL, DVB_PLL_THOMSON_DTT7579))
+				goto frontend_detach;
+			break;
+		}
+		/* ZL10353 replaces MT352 on later cards */
+		fe0->dvb.frontend = dvb_attach(zl10353_attach,
+					       &dvico_fusionhdtv_plus_v1_1,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend,
+					0x60, NULL, DVB_PLL_THOMSON_DTT7579))
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL:
+		/*
+		 * The tin box says DEE1601, but it seems to be DTT7579
+		 * compatible, with a slightly different MT352 AGC gain.
+		 */
+		fe0->dvb.frontend = dvb_attach(mt352_attach,
+					       &dvico_fusionhdtv_dual,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend,
+					0x61, NULL, DVB_PLL_THOMSON_DTT7579))
+				goto frontend_detach;
+			break;
+		}
+		/* ZL10353 replaces MT352 on later cards */
+		fe0->dvb.frontend = dvb_attach(zl10353_attach,
+					       &dvico_fusionhdtv_plus_v1_1,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend,
+					0x61, NULL, DVB_PLL_THOMSON_DTT7579))
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T1:
+		fe0->dvb.frontend = dvb_attach(mt352_attach,
+					       &dvico_fusionhdtv,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend,
+					0x61, NULL, DVB_PLL_LG_Z201))
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_KWORLD_DVB_T:
+	case CX88_BOARD_DNTV_LIVE_DVB_T:
+	case CX88_BOARD_ADSTECH_DVB_T_PCI:
+		fe0->dvb.frontend = dvb_attach(mt352_attach,
+					       &dntv_live_dvbt_config,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend,
+					0x61, NULL, DVB_PLL_UNKNOWN_1))
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_DNTV_LIVE_DVB_T_PRO:
+#if IS_ENABLED(CONFIG_VIDEO_CX88_VP3054)
+		/* MT352 is on a secondary I2C bus made from some GPIO lines */
+		fe0->dvb.frontend = dvb_attach(mt352_attach,
+					       &dntv_live_dvbt_pro_config,
+					       &dev->vp3054->adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
+					&core->i2c_adap, 0x61,
+					TUNER_PHILIPS_FMD1216ME_MK3))
+				goto frontend_detach;
+		}
+#else
+		pr_err("built without vp3054 support\n");
+#endif
+		break;
+	case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_HYBRID:
+		fe0->dvb.frontend = dvb_attach(zl10353_attach,
+					       &dvico_fusionhdtv_hybrid,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
+					&core->i2c_adap, 0x61,
+					TUNER_THOMSON_FE6600))
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO:
+		fe0->dvb.frontend = dvb_attach(zl10353_attach,
+					       &dvico_fusionhdtv_xc3028,
+					       &core->i2c_adap);
+		if (!fe0->dvb.frontend)
+			fe0->dvb.frontend = dvb_attach(mt352_attach,
+						&dvico_fusionhdtv_mt352_xc3028,
+						&core->i2c_adap);
+		/*
+		 * On this board, the demod provides the I2C bus pullup.
+		 * We must not permit gate_ctrl to be performed, or
+		 * the xc3028 cannot communicate on the bus.
+		 */
+		if (fe0->dvb.frontend)
+			fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL;
+		if (attach_xc3028(0x61, dev) < 0)
+			goto frontend_detach;
+		break;
+	case CX88_BOARD_PCHDTV_HD3000:
+		fe0->dvb.frontend = dvb_attach(or51132_attach, &pchdtv_hd3000,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
+					&core->i2c_adap, 0x61,
+					TUNER_THOMSON_DTT761X))
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q:
+		dev->ts_gen_cntrl = 0x08;
+
+		/* Do a hardware reset of chip before using it. */
+		cx_clear(MO_GP0_IO, 1);
+		msleep(100);
+		cx_set(MO_GP0_IO, 1);
+		msleep(200);
+
+		/* Select RF connector callback */
+		fusionhdtv_3_gold.pll_rf_set = lgdt330x_pll_rf_set;
+		fe0->dvb.frontend = dvb_attach(lgdt330x_attach,
+					       &fusionhdtv_3_gold,
+					       0x0e,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
+					&core->i2c_adap, 0x61,
+					TUNER_MICROTUNE_4042FI5))
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T:
+		dev->ts_gen_cntrl = 0x08;
+
+		/* Do a hardware reset of chip before using it. */
+		cx_clear(MO_GP0_IO, 1);
+		msleep(100);
+		cx_set(MO_GP0_IO, 9);
+		msleep(200);
+		fe0->dvb.frontend = dvb_attach(lgdt330x_attach,
+					       &fusionhdtv_3_gold,
+					       0x0e,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
+					&core->i2c_adap, 0x61,
+					TUNER_THOMSON_DTT761X))
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD:
+		dev->ts_gen_cntrl = 0x08;
+
+		/* Do a hardware reset of chip before using it. */
+		cx_clear(MO_GP0_IO, 1);
+		msleep(100);
+		cx_set(MO_GP0_IO, 1);
+		msleep(200);
+		fe0->dvb.frontend = dvb_attach(lgdt330x_attach,
+					       &fusionhdtv_5_gold,
+					       0x0e,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
+					&core->i2c_adap, 0x61,
+					TUNER_LG_TDVS_H06XF))
+				goto frontend_detach;
+			if (!dvb_attach(tda9887_attach, fe0->dvb.frontend,
+					&core->i2c_adap, 0x43))
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_PCHDTV_HD5500:
+		dev->ts_gen_cntrl = 0x08;
+
+		/* Do a hardware reset of chip before using it. */
+		cx_clear(MO_GP0_IO, 1);
+		msleep(100);
+		cx_set(MO_GP0_IO, 1);
+		msleep(200);
+		fe0->dvb.frontend = dvb_attach(lgdt330x_attach,
+					       &pchdtv_hd5500,
+					       0x59,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
+					&core->i2c_adap, 0x61,
+					TUNER_LG_TDVS_H06XF))
+				goto frontend_detach;
+			if (!dvb_attach(tda9887_attach, fe0->dvb.frontend,
+					&core->i2c_adap, 0x43))
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_ATI_HDTVWONDER:
+		fe0->dvb.frontend = dvb_attach(nxt200x_attach,
+					       &ati_hdtvwonder,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
+					&core->i2c_adap, 0x61,
+					TUNER_PHILIPS_TUV1236D))
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1:
+	case CX88_BOARD_HAUPPAUGE_NOVASE2_S1:
+		fe0->dvb.frontend = dvb_attach(cx24123_attach,
+					       &hauppauge_novas_config,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			bool override_tone;
+
+			if (core->model == 92001)
+				override_tone = true;
+			else
+				override_tone = false;
+
+			if (!dvb_attach(isl6421_attach, fe0->dvb.frontend,
+					&core->i2c_adap, 0x08, ISL6421_DCL,
+					0x00, override_tone))
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_KWORLD_DVBS_100:
+		fe0->dvb.frontend = dvb_attach(cx24123_attach,
+					       &kworld_dvbs_100_config,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage;
+			fe0->dvb.frontend->ops.set_voltage = kworld_dvbs_100_set_voltage;
+		}
+		break;
+	case CX88_BOARD_GENIATECH_DVBS:
+		fe0->dvb.frontend = dvb_attach(cx24123_attach,
+					       &geniatech_dvbs_config,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage;
+			fe0->dvb.frontend->ops.set_voltage = geniatech_dvbs_set_voltage;
+		}
+		break;
+	case CX88_BOARD_PINNACLE_PCTV_HD_800i:
+		fe0->dvb.frontend = dvb_attach(s5h1409_attach,
+					       &pinnacle_pctv_hd_800i_config,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(xc5000_attach, fe0->dvb.frontend,
+					&core->i2c_adap,
+					&pinnacle_pctv_hd_800i_tuner_config))
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
+		fe0->dvb.frontend = dvb_attach(s5h1409_attach,
+					       &dvico_hdtv5_pci_nano_config,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			struct dvb_frontend *fe;
+			struct xc2028_config cfg = {
+				.i2c_adap  = &core->i2c_adap,
+				.i2c_addr  = 0x61,
+			};
+			static struct xc2028_ctrl ctl = {
+				.fname       = XC2028_DEFAULT_FIRMWARE,
+				.max_len     = 64,
+				.scode_table = XC3028_FE_OREN538,
+			};
+
+			fe = dvb_attach(xc2028_attach,
+					fe0->dvb.frontend, &cfg);
+			if (fe && fe->ops.tuner_ops.set_config)
+				fe->ops.tuner_ops.set_config(fe, &ctl);
+		}
+		break;
+	case CX88_BOARD_NOTONLYTV_LV3H:
+	case CX88_BOARD_PINNACLE_HYBRID_PCTV:
+	case CX88_BOARD_WINFAST_DTV1800H:
+		fe0->dvb.frontend = dvb_attach(zl10353_attach,
+					       &cx88_pinnacle_hybrid_pctv,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL;
+			if (attach_xc3028(0x61, dev) < 0)
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_WINFAST_DTV1800H_XC4000:
+	case CX88_BOARD_WINFAST_DTV2000H_PLUS:
+		fe0->dvb.frontend = dvb_attach(zl10353_attach,
+					       &cx88_pinnacle_hybrid_pctv,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			struct xc4000_config cfg = {
+				.i2c_address	  = 0x61,
+				.default_pm	  = 0,
+				.dvb_amplitude	  = 134,
+				.set_smoothedcvbs = 1,
+				.if_khz		  = 4560
+			};
+			fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL;
+			if (attach_xc4000(dev, &cfg) < 0)
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_GENIATECH_X8000_MT:
+		dev->ts_gen_cntrl = 0x00;
+
+		fe0->dvb.frontend = dvb_attach(zl10353_attach,
+					       &cx88_geniatech_x8000_mt,
+					       &core->i2c_adap);
+		if (attach_xc3028(0x61, dev) < 0)
+			goto frontend_detach;
+		break;
+	case CX88_BOARD_KWORLD_ATSC_120:
+		fe0->dvb.frontend = dvb_attach(s5h1409_attach,
+					       &kworld_atsc_120_config,
+					       &core->i2c_adap);
+		if (attach_xc3028(0x61, dev) < 0)
+			goto frontend_detach;
+		break;
+	case CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD:
+		fe0->dvb.frontend = dvb_attach(s5h1411_attach,
+					       &dvico_fusionhdtv7_config,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(xc5000_attach, fe0->dvb.frontend,
+					&core->i2c_adap,
+					&dvico_fusionhdtv7_tuner_config))
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_HAUPPAUGE_HVR4000:
+		/* MFE frontend 1 */
+		mfe_shared = 1;
+		dev->frontends.gate = 2;
+		/* DVB-S/S2 Init */
+		fe0->dvb.frontend = dvb_attach(cx24116_attach,
+					       &hauppauge_hvr4000_config,
+					       &dev->core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(isl6421_attach,
+					fe0->dvb.frontend,
+					&dev->core->i2c_adap,
+					0x08, ISL6421_DCL, 0x00, false))
+				goto frontend_detach;
+		}
+		/* MFE frontend 2 */
+		fe1 = vb2_dvb_get_frontend(&dev->frontends, 2);
+		if (!fe1)
+			goto frontend_detach;
+		/* DVB-T Init */
+		fe1->dvb.frontend = dvb_attach(cx22702_attach,
+					       &hauppauge_hvr_config,
+					       &dev->core->i2c_adap);
+		if (fe1->dvb.frontend) {
+			fe1->dvb.frontend->id = 1;
+			if (!dvb_attach(simple_tuner_attach,
+					fe1->dvb.frontend,
+					&dev->core->i2c_adap,
+					0x61, TUNER_PHILIPS_FMD1216ME_MK3))
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_HAUPPAUGE_HVR4000LITE:
+		fe0->dvb.frontend = dvb_attach(cx24116_attach,
+					       &hauppauge_hvr4000_config,
+					       &dev->core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(isl6421_attach,
+					fe0->dvb.frontend,
+					&dev->core->i2c_adap,
+					0x08, ISL6421_DCL, 0x00, false))
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_PROF_6200:
+	case CX88_BOARD_TBS_8910:
+	case CX88_BOARD_TEVII_S420:
+		fe0->dvb.frontend = dvb_attach(stv0299_attach,
+						&tevii_tuner_sharp_config,
+						&core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x60,
+					&core->i2c_adap, DVB_PLL_OPERA1))
+				goto frontend_detach;
+			core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage;
+			fe0->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage;
+
+		} else {
+			fe0->dvb.frontend = dvb_attach(stv0288_attach,
+							    &tevii_tuner_earda_config,
+							    &core->i2c_adap);
+			if (fe0->dvb.frontend) {
+				if (!dvb_attach(stb6000_attach,
+						fe0->dvb.frontend, 0x61,
+						&core->i2c_adap))
+					goto frontend_detach;
+				core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage;
+				fe0->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage;
+			}
+		}
+		break;
+	case CX88_BOARD_TEVII_S460:
+		fe0->dvb.frontend = dvb_attach(cx24116_attach,
+					       &tevii_s460_config,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend)
+			fe0->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage;
+		break;
+	case CX88_BOARD_TEVII_S464:
+		fe0->dvb.frontend = dvb_attach(ds3000_attach,
+						&tevii_ds3000_config,
+						&core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			dvb_attach(ts2020_attach, fe0->dvb.frontend,
+				   &tevii_ts2020_config, &core->i2c_adap);
+			fe0->dvb.frontend->ops.set_voltage =
+							tevii_dvbs_set_voltage;
+		}
+		break;
+	case CX88_BOARD_OMICOM_SS4_PCI:
+	case CX88_BOARD_TBS_8920:
+	case CX88_BOARD_PROF_7300:
+	case CX88_BOARD_SATTRADE_ST4200:
+		fe0->dvb.frontend = dvb_attach(cx24116_attach,
+					       &hauppauge_hvr4000_config,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend)
+			fe0->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage;
+		break;
+	case CX88_BOARD_TERRATEC_CINERGY_HT_PCI_MKII:
+		fe0->dvb.frontend = dvb_attach(zl10353_attach,
+					       &cx88_terratec_cinergy_ht_pci_mkii_config,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL;
+			if (attach_xc3028(0x61, dev) < 0)
+				goto frontend_detach;
+		}
+		break;
+	case CX88_BOARD_PROF_7301:{
+		struct dvb_tuner_ops *tuner_ops = NULL;
+
+		fe0->dvb.frontend = dvb_attach(stv0900_attach,
+					       &prof_7301_stv0900_config,
+					       &core->i2c_adap, 0);
+		if (fe0->dvb.frontend) {
+			if (!dvb_attach(stb6100_attach, fe0->dvb.frontend,
+					&prof_7301_stb6100_config,
+					&core->i2c_adap))
+				goto frontend_detach;
+
+			tuner_ops = &fe0->dvb.frontend->ops.tuner_ops;
+			tuner_ops->set_frequency = stb6100_set_freq;
+			tuner_ops->get_frequency = stb6100_get_freq;
+			tuner_ops->set_bandwidth = stb6100_set_bandw;
+			tuner_ops->get_bandwidth = stb6100_get_bandw;
+
+			core->prev_set_voltage =
+					fe0->dvb.frontend->ops.set_voltage;
+			fe0->dvb.frontend->ops.set_voltage =
+					tevii_dvbs_set_voltage;
+		}
+		break;
+		}
+	case CX88_BOARD_SAMSUNG_SMT_7020:
+		dev->ts_gen_cntrl = 0x08;
+
+		cx_set(MO_GP0_IO, 0x0101);
+
+		cx_clear(MO_GP0_IO, 0x01);
+		msleep(100);
+		cx_set(MO_GP0_IO, 0x01);
+		msleep(200);
+
+		fe0->dvb.frontend = dvb_attach(stv0299_attach,
+					       &samsung_stv0299_config,
+					       &dev->core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			fe0->dvb.frontend->ops.tuner_ops.set_params =
+				samsung_smt_7020_tuner_set_params;
+			fe0->dvb.frontend->tuner_priv =
+				&dev->core->i2c_adap;
+			fe0->dvb.frontend->ops.set_voltage =
+				samsung_smt_7020_set_voltage;
+			fe0->dvb.frontend->ops.set_tone =
+				samsung_smt_7020_set_tone;
+		}
+
+		break;
+	case CX88_BOARD_TWINHAN_VP1027_DVBS:
+		dev->ts_gen_cntrl = 0x00;
+		fe0->dvb.frontend = dvb_attach(mb86a16_attach,
+					       &twinhan_vp1027,
+					       &core->i2c_adap);
+		if (fe0->dvb.frontend) {
+			core->prev_set_voltage =
+					fe0->dvb.frontend->ops.set_voltage;
+			fe0->dvb.frontend->ops.set_voltage =
+					vp1027_set_voltage;
+		}
+		break;
+
+	default:
+		pr_err("The frontend of your DVB/ATSC card isn't supported yet\n");
+		break;
+	}
+
+	if ((NULL == fe0->dvb.frontend) || (fe1 && NULL == fe1->dvb.frontend)) {
+		pr_err("frontend initialization failed\n");
+		goto frontend_detach;
+	}
+	/* define general-purpose callback pointer */
+	fe0->dvb.frontend->callback = cx88_tuner_callback;
+
+	/* Ensure all frontends negotiate bus access */
+	fe0->dvb.frontend->ops.ts_bus_ctrl = cx88_dvb_bus_ctrl;
+	if (fe1)
+		fe1->dvb.frontend->ops.ts_bus_ctrl = cx88_dvb_bus_ctrl;
+
+	/* Put the tuner in standby to keep it quiet */
+	call_all(core, tuner, standby);
+
+	/* register everything */
+	res = vb2_dvb_register_bus(&dev->frontends, THIS_MODULE, dev,
+				   &dev->pci->dev, NULL, adapter_nr,
+				   mfe_shared);
+	if (res)
+		goto frontend_detach;
+	return res;
+
+frontend_detach:
+	core->gate_ctrl = NULL;
+	vb2_dvb_dealloc_frontends(&dev->frontends);
+	return res;
+}
+
+/* ----------------------------------------------------------- */
+
+/* CX8802 MPEG -> mini driver - We have been given the hardware */
+static int cx8802_dvb_advise_acquire(struct cx8802_driver *drv)
+{
+	struct cx88_core *core = drv->core;
+	int err = 0;
+
+	dprintk(1, "%s\n", __func__);
+
+	switch (core->boardnr) {
+	case CX88_BOARD_HAUPPAUGE_HVR1300:
+		/* We arrive here with either the cx23416 or the cx22702
+		 * on the bus. Take the bus from the cx23416 and enable the
+		 * cx22702 demod
+		 */
+		/* Toggle reset on cx22702 leaving i2c active */
+		cx_set(MO_GP0_IO, 0x00000080);
+		udelay(1000);
+		cx_clear(MO_GP0_IO, 0x00000080);
+		udelay(50);
+		cx_set(MO_GP0_IO, 0x00000080);
+		udelay(1000);
+		/* enable the cx22702 pins */
+		cx_clear(MO_GP0_IO, 0x00000004);
+		udelay(1000);
+		break;
+
+	case CX88_BOARD_HAUPPAUGE_HVR3000:
+	case CX88_BOARD_HAUPPAUGE_HVR4000:
+		/* Toggle reset on cx22702 leaving i2c active */
+		cx_set(MO_GP0_IO, 0x00000080);
+		udelay(1000);
+		cx_clear(MO_GP0_IO, 0x00000080);
+		udelay(50);
+		cx_set(MO_GP0_IO, 0x00000080);
+		udelay(1000);
+		switch (core->dvbdev->frontends.active_fe_id) {
+		case 1: /* DVB-S/S2 Enabled */
+			/* tri-state the cx22702 pins */
+			cx_set(MO_GP0_IO, 0x00000004);
+			/* Take the cx24116/cx24123 out of reset */
+			cx_write(MO_SRST_IO, 1);
+			core->dvbdev->ts_gen_cntrl = 0x02; /* Parallel IO */
+			break;
+		case 2: /* DVB-T Enabled */
+			/* Put the cx24116/cx24123 into reset */
+			cx_write(MO_SRST_IO, 0);
+			/* enable the cx22702 pins */
+			cx_clear(MO_GP0_IO, 0x00000004);
+			core->dvbdev->ts_gen_cntrl = 0x0c; /* Serial IO */
+			break;
+		}
+		udelay(1000);
+		break;
+
+	case CX88_BOARD_WINFAST_DTV2000H_PLUS:
+		/* set RF input to AIR for DVB-T (GPIO 16) */
+		cx_write(MO_GP2_IO, 0x0101);
+		break;
+
+	default:
+		err = -ENODEV;
+	}
+	return err;
+}
+
+/* CX8802 MPEG -> mini driver - We no longer have the hardware */
+static int cx8802_dvb_advise_release(struct cx8802_driver *drv)
+{
+	struct cx88_core *core = drv->core;
+	int err = 0;
+
+	dprintk(1, "%s\n", __func__);
+
+	switch (core->boardnr) {
+	case CX88_BOARD_HAUPPAUGE_HVR1300:
+		/* Do Nothing, leave the cx22702 on the bus. */
+		break;
+	case CX88_BOARD_HAUPPAUGE_HVR3000:
+	case CX88_BOARD_HAUPPAUGE_HVR4000:
+		break;
+	default:
+		err = -ENODEV;
+	}
+	return err;
+}
+
+static int cx8802_dvb_probe(struct cx8802_driver *drv)
+{
+	struct cx88_core *core = drv->core;
+	struct cx8802_dev *dev = drv->core->dvbdev;
+	int err;
+	struct vb2_dvb_frontend *fe;
+	int i;
+
+	dprintk(1, "%s\n", __func__);
+	dprintk(1, " ->being probed by Card=%d Name=%s, PCI %02x:%02x\n",
+		core->boardnr,
+		core->name,
+		core->pci_bus,
+		core->pci_slot);
+
+	err = -ENODEV;
+	if (!(core->board.mpeg & CX88_MPEG_DVB))
+		goto fail_core;
+
+	/* If vp3054 isn't enabled, a stub will just return 0 */
+	err = vp3054_i2c_probe(dev);
+	if (err != 0)
+		goto fail_core;
+
+	/* dvb stuff */
+	pr_info("cx2388x based DVB/ATSC card\n");
+	dev->ts_gen_cntrl = 0x0c;
+
+	err = cx8802_alloc_frontends(dev);
+	if (err)
+		goto fail_core;
+
+	for (i = 1; i <= core->board.num_frontends; i++) {
+		struct vb2_queue *q;
+
+		fe = vb2_dvb_get_frontend(&core->dvbdev->frontends, i);
+		if (!fe) {
+			pr_err("%s() failed to get frontend(%d)\n",
+			       __func__, i);
+			err = -ENODEV;
+			goto fail_probe;
+		}
+		q = &fe->dvb.dvbq;
+		q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+		q->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF | VB2_READ;
+		q->gfp_flags = GFP_DMA32;
+		q->min_buffers_needed = 2;
+		q->drv_priv = dev;
+		q->buf_struct_size = sizeof(struct cx88_buffer);
+		q->ops = &dvb_qops;
+		q->mem_ops = &vb2_dma_sg_memops;
+		q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+		q->lock = &core->lock;
+		q->dev = &dev->pci->dev;
+
+		err = vb2_queue_init(q);
+		if (err < 0)
+			goto fail_probe;
+
+		/* init struct vb2_dvb */
+		fe->dvb.name = dev->core->name;
+	}
+
+	err = dvb_register(dev);
+	if (err)
+		/* frontends/adapter de-allocated in dvb_register */
+		pr_err("dvb_register failed (err = %d)\n", err);
+	return err;
+fail_probe:
+	vb2_dvb_dealloc_frontends(&core->dvbdev->frontends);
+fail_core:
+	return err;
+}
+
+static int cx8802_dvb_remove(struct cx8802_driver *drv)
+{
+	struct cx88_core *core = drv->core;
+	struct cx8802_dev *dev = drv->core->dvbdev;
+
+	dprintk(1, "%s\n", __func__);
+
+	vb2_dvb_unregister_bus(&dev->frontends);
+
+	vp3054_i2c_remove(dev);
+
+	core->gate_ctrl = NULL;
+
+	return 0;
+}
+
+static struct cx8802_driver cx8802_dvb_driver = {
+	.type_id        = CX88_MPEG_DVB,
+	.hw_access      = CX8802_DRVCTL_SHARED,
+	.probe          = cx8802_dvb_probe,
+	.remove         = cx8802_dvb_remove,
+	.advise_acquire = cx8802_dvb_advise_acquire,
+	.advise_release = cx8802_dvb_advise_release,
+};
+
+static int __init dvb_init(void)
+{
+	pr_info("cx2388x dvb driver version %s loaded\n", CX88_VERSION);
+	return cx8802_register_driver(&cx8802_dvb_driver);
+}
+
+static void __exit dvb_fini(void)
+{
+	cx8802_unregister_driver(&cx8802_dvb_driver);
+}
+
+module_init(dvb_init);
+module_exit(dvb_fini);
diff --git a/drivers/media/pci/cx88/cx88-i2c.c b/drivers/media/pci/cx88/cx88-i2c.c
new file mode 100644
index 000000000..7fc64aef1
--- /dev/null
+++ b/drivers/media/pci/cx88/cx88-i2c.c
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+/*
+ *
+ * cx88-i2c.c  --  all the i2c code is here
+ *
+ * Copyright (C) 1996,97,98 Ralph  Metzler (rjkm@thp.uni-koeln.de)
+ *			   & Marcus Metzler (mocm@thp.uni-koeln.de)
+ * (c) 2002 Yurij Sysoev <yurij@naturesoft.net>
+ * (c) 1999-2003 Gerd Knorr <kraxel@bytesex.org>
+ * (c) 2005 Mauro Carvalho Chehab <mchehab@kernel.org>
+ *	- Multituner support and i2c address binding
+ */
+
+#include "cx88.h"
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+
+#include <media/v4l2-common.h>
+
+static unsigned int i2c_debug;
+module_param(i2c_debug, int, 0644);
+MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]");
+
+static unsigned int i2c_scan;
+module_param(i2c_scan, int, 0444);
+MODULE_PARM_DESC(i2c_scan, "scan i2c bus at insmod time");
+
+static unsigned int i2c_udelay = 5;
+module_param(i2c_udelay, int, 0644);
+MODULE_PARM_DESC(i2c_udelay,
+		 "i2c delay at insmod time, in usecs (should be 5 or higher). Lower value means higher bus speed.");
+
+#define dprintk(level, fmt, arg...) do {				\
+	if (i2c_debug >= level)						\
+		printk(KERN_DEBUG pr_fmt("%s: i2c:" fmt),		\
+			__func__, ##arg);				\
+} while (0)
+
+/* ----------------------------------------------------------------------- */
+
+static void cx8800_bit_setscl(void *data, int state)
+{
+	struct cx88_core *core = data;
+
+	if (state)
+		core->i2c_state |= 0x02;
+	else
+		core->i2c_state &= ~0x02;
+	cx_write(MO_I2C, core->i2c_state);
+	cx_read(MO_I2C);
+}
+
+static void cx8800_bit_setsda(void *data, int state)
+{
+	struct cx88_core *core = data;
+
+	if (state)
+		core->i2c_state |= 0x01;
+	else
+		core->i2c_state &= ~0x01;
+	cx_write(MO_I2C, core->i2c_state);
+	cx_read(MO_I2C);
+}
+
+static int cx8800_bit_getscl(void *data)
+{
+	struct cx88_core *core = data;
+	u32 state;
+
+	state = cx_read(MO_I2C);
+	return state & 0x02 ? 1 : 0;
+}
+
+static int cx8800_bit_getsda(void *data)
+{
+	struct cx88_core *core = data;
+	u32 state;
+
+	state = cx_read(MO_I2C);
+	return state & 0x01;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static const struct i2c_algo_bit_data cx8800_i2c_algo_template = {
+	.setsda  = cx8800_bit_setsda,
+	.setscl  = cx8800_bit_setscl,
+	.getsda  = cx8800_bit_getsda,
+	.getscl  = cx8800_bit_getscl,
+	.udelay  = 16,
+	.timeout = 200,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static const char * const i2c_devs[128] = {
+	[0x1c >> 1] = "lgdt330x",
+	[0x86 >> 1] = "tda9887/cx22702",
+	[0xa0 >> 1] = "eeprom",
+	[0xc0 >> 1] = "tuner (analog)",
+	[0xc2 >> 1] = "tuner (analog/dvb)",
+	[0xc8 >> 1] = "xc5000",
+};
+
+static void do_i2c_scan(const char *name, struct i2c_client *c)
+{
+	unsigned char buf;
+	int i, rc;
+
+	for (i = 0; i < ARRAY_SIZE(i2c_devs); i++) {
+		c->addr = i;
+		rc = i2c_master_recv(c, &buf, 0);
+		if (rc < 0)
+			continue;
+		pr_info("i2c scan: found device @ 0x%x  [%s]\n",
+			i << 1, i2c_devs[i] ? i2c_devs[i] : "???");
+	}
+}
+
+/* init + register i2c adapter */
+int cx88_i2c_init(struct cx88_core *core, struct pci_dev *pci)
+{
+	/* Prevents usage of invalid delay values */
+	if (i2c_udelay < 5)
+		i2c_udelay = 5;
+
+	core->i2c_algo = cx8800_i2c_algo_template;
+
+	core->i2c_adap.dev.parent = &pci->dev;
+	strscpy(core->i2c_adap.name, core->name, sizeof(core->i2c_adap.name));
+	core->i2c_adap.owner = THIS_MODULE;
+	core->i2c_algo.udelay = i2c_udelay;
+	core->i2c_algo.data = core;
+	i2c_set_adapdata(&core->i2c_adap, &core->v4l2_dev);
+	core->i2c_adap.algo_data = &core->i2c_algo;
+	core->i2c_client.adapter = &core->i2c_adap;
+	strscpy(core->i2c_client.name, "cx88xx internal", I2C_NAME_SIZE);
+
+	cx8800_bit_setscl(core, 1);
+	cx8800_bit_setsda(core, 1);
+
+	core->i2c_rc = i2c_bit_add_bus(&core->i2c_adap);
+	if (core->i2c_rc == 0) {
+		static u8 tuner_data[] = {
+			0x0b, 0xdc, 0x86, 0x52 };
+		static struct i2c_msg tuner_msg = {
+			.flags = 0,
+			.addr = 0xc2 >> 1,
+			.buf = tuner_data,
+			.len = 4
+		};
+
+		dprintk(1, "i2c register ok\n");
+		switch (core->boardnr) {
+		case CX88_BOARD_HAUPPAUGE_HVR1300:
+		case CX88_BOARD_HAUPPAUGE_HVR3000:
+		case CX88_BOARD_HAUPPAUGE_HVR4000:
+			pr_info("i2c init: enabling analog demod on HVR1300/3000/4000 tuner\n");
+			i2c_transfer(core->i2c_client.adapter, &tuner_msg, 1);
+			break;
+		default:
+			break;
+		}
+		if (i2c_scan)
+			do_i2c_scan(core->name, &core->i2c_client);
+	} else
+		pr_err("i2c register FAILED\n");
+
+	return core->i2c_rc;
+}
diff --git a/drivers/media/pci/cx88/cx88-input.c b/drivers/media/pci/cx88/cx88-input.c
new file mode 100644
index 000000000..a04a1d33f
--- /dev/null
+++ b/drivers/media/pci/cx88/cx88-input.c
@@ -0,0 +1,651 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *
+ * Device driver for GPIO attached remote control interfaces
+ * on Conexant 2388x based TV/DVB cards.
+ *
+ * Copyright (c) 2003 Pavel Machek
+ * Copyright (c) 2004 Gerd Knorr
+ * Copyright (c) 2004, 2005 Chris Pascoe
+ */
+
+#include "cx88.h"
+
+#include <linux/init.h>
+#include <linux/hrtimer.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+
+#include <media/rc-core.h>
+
+#define MODULE_NAME "cx88xx"
+
+/* ---------------------------------------------------------------------- */
+
+struct cx88_IR {
+	struct cx88_core *core;
+	struct rc_dev *dev;
+
+	int users;
+
+	char name[32];
+	char phys[32];
+
+	/* sample from gpio pin 16 */
+	u32 sampling;
+
+	/* poll external decoder */
+	int polling;
+	struct hrtimer timer;
+	u32 gpio_addr;
+	u32 last_gpio;
+	u32 mask_keycode;
+	u32 mask_keydown;
+	u32 mask_keyup;
+};
+
+static unsigned int ir_samplerate = 4;
+module_param(ir_samplerate, uint, 0444);
+MODULE_PARM_DESC(ir_samplerate, "IR samplerate in kHz, 1 - 20, default 4");
+
+static int ir_debug;
+module_param(ir_debug, int, 0644);	/* debug level [IR] */
+MODULE_PARM_DESC(ir_debug, "enable debug messages [IR]");
+
+#define ir_dprintk(fmt, arg...)	do {					\
+	if (ir_debug)							\
+		printk(KERN_DEBUG "%s IR: " fmt, ir->core->name, ##arg);\
+} while (0)
+
+#define dprintk(fmt, arg...) do {					\
+	if (ir_debug)							\
+		printk(KERN_DEBUG "cx88 IR: " fmt, ##arg);		\
+} while (0)
+
+/* ---------------------------------------------------------------------- */
+
+static void cx88_ir_handle_key(struct cx88_IR *ir)
+{
+	struct cx88_core *core = ir->core;
+	u32 gpio, data, auxgpio;
+
+	/* read gpio value */
+	gpio = cx_read(ir->gpio_addr);
+	switch (core->boardnr) {
+	case CX88_BOARD_NPGTECH_REALTV_TOP10FM:
+		/*
+		 * This board apparently uses a combination of 2 GPIO
+		 * to represent the keys. Additionally, the second GPIO
+		 * can be used for parity.
+		 *
+		 * Example:
+		 *
+		 * for key "5"
+		 *	gpio = 0x758, auxgpio = 0xe5 or 0xf5
+		 * for key "Power"
+		 *	gpio = 0x758, auxgpio = 0xed or 0xfd
+		 */
+
+		auxgpio = cx_read(MO_GP1_IO);
+		/* Take out the parity part */
+		gpio = (gpio & 0x7fd) + (auxgpio & 0xef);
+		break;
+	case CX88_BOARD_WINFAST_DTV1000:
+	case CX88_BOARD_WINFAST_DTV1800H:
+	case CX88_BOARD_WINFAST_DTV1800H_XC4000:
+	case CX88_BOARD_WINFAST_DTV2000H_PLUS:
+	case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL:
+	case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL_6F36:
+	case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL_6F43:
+		gpio = (gpio & 0x6ff) | ((cx_read(MO_GP1_IO) << 8) & 0x900);
+		auxgpio = gpio;
+		break;
+	default:
+		auxgpio = gpio;
+	}
+	if (ir->polling) {
+		if (ir->last_gpio == auxgpio)
+			return;
+		ir->last_gpio = auxgpio;
+	}
+
+	/* extract data */
+	data = ir_extract_bits(gpio, ir->mask_keycode);
+	ir_dprintk("irq gpio=0x%x code=%d | %s%s%s\n",
+		   gpio, data,
+		   ir->polling ? "poll" : "irq",
+		   (gpio & ir->mask_keydown) ? " down" : "",
+		   (gpio & ir->mask_keyup) ? " up" : "");
+
+	if (ir->core->boardnr == CX88_BOARD_NORWOOD_MICRO) {
+		u32 gpio_key = cx_read(MO_GP0_IO);
+
+		data = (data << 4) | ((gpio_key & 0xf0) >> 4);
+
+		rc_keydown(ir->dev, RC_PROTO_UNKNOWN, data, 0);
+
+	} else if (ir->core->boardnr == CX88_BOARD_PROLINK_PLAYTVPVR ||
+		   ir->core->boardnr == CX88_BOARD_PIXELVIEW_PLAYTV_ULTRA_PRO) {
+		/* bit cleared on keydown, NEC scancode, 0xAAAACC, A = 0x866b */
+		u16 addr;
+		u8 cmd;
+		u32 scancode;
+
+		addr = (data >> 8) & 0xffff;
+		cmd  = (data >> 0) & 0x00ff;
+		scancode = RC_SCANCODE_NECX(addr, cmd);
+
+		if (0 == (gpio & ir->mask_keyup))
+			rc_keydown_notimeout(ir->dev, RC_PROTO_NECX, scancode,
+					     0);
+		else
+			rc_keyup(ir->dev);
+
+	} else if (ir->mask_keydown) {
+		/* bit set on keydown */
+		if (gpio & ir->mask_keydown)
+			rc_keydown_notimeout(ir->dev, RC_PROTO_UNKNOWN, data,
+					     0);
+		else
+			rc_keyup(ir->dev);
+
+	} else if (ir->mask_keyup) {
+		/* bit cleared on keydown */
+		if (0 == (gpio & ir->mask_keyup))
+			rc_keydown_notimeout(ir->dev, RC_PROTO_UNKNOWN, data,
+					     0);
+		else
+			rc_keyup(ir->dev);
+
+	} else {
+		/* can't distinguish keydown/up :-/ */
+		rc_keydown_notimeout(ir->dev, RC_PROTO_UNKNOWN, data, 0);
+		rc_keyup(ir->dev);
+	}
+}
+
+static enum hrtimer_restart cx88_ir_work(struct hrtimer *timer)
+{
+	u64 missed;
+	struct cx88_IR *ir = container_of(timer, struct cx88_IR, timer);
+
+	cx88_ir_handle_key(ir);
+	missed = hrtimer_forward_now(&ir->timer,
+				     ktime_set(0, ir->polling * 1000000));
+	if (missed > 1)
+		ir_dprintk("Missed ticks %llu\n", missed - 1);
+
+	return HRTIMER_RESTART;
+}
+
+static int __cx88_ir_start(void *priv)
+{
+	struct cx88_core *core = priv;
+	struct cx88_IR *ir;
+
+	if (!core || !core->ir)
+		return -EINVAL;
+
+	ir = core->ir;
+
+	if (ir->polling) {
+		hrtimer_init(&ir->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+		ir->timer.function = cx88_ir_work;
+		hrtimer_start(&ir->timer,
+			      ktime_set(0, ir->polling * 1000000),
+			      HRTIMER_MODE_REL);
+	}
+	if (ir->sampling) {
+		core->pci_irqmask |= PCI_INT_IR_SMPINT;
+		cx_write(MO_DDS_IO, 0x33F286 * ir_samplerate); /* samplerate */
+		cx_write(MO_DDSCFG_IO, 0x5); /* enable */
+	}
+	return 0;
+}
+
+static void __cx88_ir_stop(void *priv)
+{
+	struct cx88_core *core = priv;
+	struct cx88_IR *ir;
+
+	if (!core || !core->ir)
+		return;
+
+	ir = core->ir;
+	if (ir->sampling) {
+		cx_write(MO_DDSCFG_IO, 0x0);
+		core->pci_irqmask &= ~PCI_INT_IR_SMPINT;
+	}
+
+	if (ir->polling)
+		hrtimer_cancel(&ir->timer);
+}
+
+int cx88_ir_start(struct cx88_core *core)
+{
+	if (core->ir->users)
+		return __cx88_ir_start(core);
+
+	return 0;
+}
+EXPORT_SYMBOL(cx88_ir_start);
+
+void cx88_ir_stop(struct cx88_core *core)
+{
+	if (core->ir->users)
+		__cx88_ir_stop(core);
+}
+EXPORT_SYMBOL(cx88_ir_stop);
+
+static int cx88_ir_open(struct rc_dev *rc)
+{
+	struct cx88_core *core = rc->priv;
+
+	core->ir->users++;
+	return __cx88_ir_start(core);
+}
+
+static void cx88_ir_close(struct rc_dev *rc)
+{
+	struct cx88_core *core = rc->priv;
+
+	core->ir->users--;
+	if (!core->ir->users)
+		__cx88_ir_stop(core);
+}
+
+/* ---------------------------------------------------------------------- */
+
+int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
+{
+	struct cx88_IR *ir;
+	struct rc_dev *dev;
+	char *ir_codes = NULL;
+	u64 rc_proto = RC_PROTO_BIT_OTHER;
+	int err = -ENOMEM;
+	u32 hardware_mask = 0;	/* For devices with a hardware mask, when
+				 * used with a full-code IR table
+				 */
+
+	ir = kzalloc(sizeof(*ir), GFP_KERNEL);
+	dev = rc_allocate_device(RC_DRIVER_IR_RAW);
+	if (!ir || !dev)
+		goto err_out_free;
+
+	ir->dev = dev;
+
+	/* detect & configure */
+	switch (core->boardnr) {
+	case CX88_BOARD_DNTV_LIVE_DVB_T:
+	case CX88_BOARD_KWORLD_DVB_T:
+	case CX88_BOARD_KWORLD_DVB_T_CX22702:
+		ir_codes = RC_MAP_DNTV_LIVE_DVB_T;
+		ir->gpio_addr = MO_GP1_IO;
+		ir->mask_keycode = 0x1f;
+		ir->mask_keyup = 0x60;
+		ir->polling = 50; /* ms */
+		break;
+	case CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1:
+		ir_codes = RC_MAP_CINERGY_1400;
+		ir->sampling = 0xeb04; /* address */
+		break;
+	case CX88_BOARD_HAUPPAUGE:
+	case CX88_BOARD_HAUPPAUGE_DVB_T1:
+	case CX88_BOARD_HAUPPAUGE_NOVASE2_S1:
+	case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1:
+	case CX88_BOARD_HAUPPAUGE_HVR1100:
+	case CX88_BOARD_HAUPPAUGE_HVR3000:
+	case CX88_BOARD_HAUPPAUGE_HVR4000:
+	case CX88_BOARD_HAUPPAUGE_HVR4000LITE:
+	case CX88_BOARD_PCHDTV_HD3000:
+	case CX88_BOARD_PCHDTV_HD5500:
+	case CX88_BOARD_HAUPPAUGE_IRONLY:
+		ir_codes = RC_MAP_HAUPPAUGE;
+		ir->sampling = 1;
+		break;
+	case CX88_BOARD_WINFAST_DTV2000H:
+	case CX88_BOARD_WINFAST_DTV2000H_J:
+	case CX88_BOARD_WINFAST_DTV1800H:
+	case CX88_BOARD_WINFAST_DTV1800H_XC4000:
+	case CX88_BOARD_WINFAST_DTV2000H_PLUS:
+		ir_codes = RC_MAP_WINFAST;
+		ir->gpio_addr = MO_GP0_IO;
+		ir->mask_keycode = 0x8f8;
+		ir->mask_keyup = 0x100;
+		ir->polling = 50; /* ms */
+		break;
+	case CX88_BOARD_WINFAST2000XP_EXPERT:
+	case CX88_BOARD_WINFAST_DTV1000:
+	case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL:
+	case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL_6F36:
+	case CX88_BOARD_WINFAST_TV2000_XP_GLOBAL_6F43:
+		ir_codes = RC_MAP_WINFAST;
+		ir->gpio_addr = MO_GP0_IO;
+		ir->mask_keycode = 0x8f8;
+		ir->mask_keyup = 0x100;
+		ir->polling = 1; /* ms */
+		break;
+	case CX88_BOARD_IODATA_GVBCTV7E:
+		ir_codes = RC_MAP_IODATA_BCTV7E;
+		ir->gpio_addr = MO_GP0_IO;
+		ir->mask_keycode = 0xfd;
+		ir->mask_keydown = 0x02;
+		ir->polling = 5; /* ms */
+		break;
+	case CX88_BOARD_PROLINK_PLAYTVPVR:
+	case CX88_BOARD_PIXELVIEW_PLAYTV_ULTRA_PRO:
+		/*
+		 * It seems that this hardware is paired with NEC extended
+		 * address 0x866b. So, unfortunately, its usage with other
+		 * IR's with different address won't work. Still, there are
+		 * other IR's from the same manufacturer that works, like the
+		 * 002-T mini RC, provided with newer PV hardware
+		 */
+		ir_codes = RC_MAP_PIXELVIEW_MK12;
+		rc_proto = RC_PROTO_BIT_NECX;
+		ir->gpio_addr = MO_GP1_IO;
+		ir->mask_keyup = 0x80;
+		ir->polling = 10; /* ms */
+		hardware_mask = 0x3f;	/* Hardware returns only 6 bits from command part */
+		break;
+	case CX88_BOARD_PROLINK_PV_8000GT:
+	case CX88_BOARD_PROLINK_PV_GLOBAL_XTREME:
+		ir_codes = RC_MAP_PIXELVIEW_NEW;
+		ir->gpio_addr = MO_GP1_IO;
+		ir->mask_keycode = 0x3f;
+		ir->mask_keyup = 0x80;
+		ir->polling = 1; /* ms */
+		break;
+	case CX88_BOARD_KWORLD_LTV883:
+		ir_codes = RC_MAP_PIXELVIEW;
+		ir->gpio_addr = MO_GP1_IO;
+		ir->mask_keycode = 0x1f;
+		ir->mask_keyup = 0x60;
+		ir->polling = 1; /* ms */
+		break;
+	case CX88_BOARD_ADSTECH_DVB_T_PCI:
+		ir_codes = RC_MAP_ADSTECH_DVB_T_PCI;
+		ir->gpio_addr = MO_GP1_IO;
+		ir->mask_keycode = 0xbf;
+		ir->mask_keyup = 0x40;
+		ir->polling = 50; /* ms */
+		break;
+	case CX88_BOARD_MSI_TVANYWHERE_MASTER:
+		ir_codes = RC_MAP_MSI_TVANYWHERE;
+		ir->gpio_addr = MO_GP1_IO;
+		ir->mask_keycode = 0x1f;
+		ir->mask_keyup = 0x40;
+		ir->polling = 1; /* ms */
+		break;
+	case CX88_BOARD_AVERTV_303:
+	case CX88_BOARD_AVERTV_STUDIO_303:
+		ir_codes         = RC_MAP_AVERTV_303;
+		ir->gpio_addr    = MO_GP2_IO;
+		ir->mask_keycode = 0xfb;
+		ir->mask_keydown = 0x02;
+		ir->polling      = 50; /* ms */
+		break;
+	case CX88_BOARD_OMICOM_SS4_PCI:
+	case CX88_BOARD_SATTRADE_ST4200:
+	case CX88_BOARD_TBS_8920:
+	case CX88_BOARD_TBS_8910:
+	case CX88_BOARD_PROF_7300:
+	case CX88_BOARD_PROF_7301:
+	case CX88_BOARD_PROF_6200:
+		ir_codes = RC_MAP_TBS_NEC;
+		ir->sampling = 0xff00; /* address */
+		break;
+	case CX88_BOARD_TEVII_S464:
+	case CX88_BOARD_TEVII_S460:
+	case CX88_BOARD_TEVII_S420:
+		ir_codes = RC_MAP_TEVII_NEC;
+		ir->sampling = 0xff00; /* address */
+		break;
+	case CX88_BOARD_DNTV_LIVE_DVB_T_PRO:
+		ir_codes         = RC_MAP_DNTV_LIVE_DVBT_PRO;
+		ir->sampling     = 0xff00; /* address */
+		break;
+	case CX88_BOARD_NORWOOD_MICRO:
+		ir_codes         = RC_MAP_NORWOOD;
+		ir->gpio_addr    = MO_GP1_IO;
+		ir->mask_keycode = 0x0e;
+		ir->mask_keyup   = 0x80;
+		ir->polling      = 50; /* ms */
+		break;
+	case CX88_BOARD_NPGTECH_REALTV_TOP10FM:
+		ir_codes         = RC_MAP_NPGTECH;
+		ir->gpio_addr    = MO_GP0_IO;
+		ir->mask_keycode = 0xfa;
+		ir->polling      = 50; /* ms */
+		break;
+	case CX88_BOARD_PINNACLE_PCTV_HD_800i:
+		ir_codes         = RC_MAP_PINNACLE_PCTV_HD;
+		ir->sampling     = 1;
+		break;
+	case CX88_BOARD_POWERCOLOR_REAL_ANGEL:
+		ir_codes         = RC_MAP_POWERCOLOR_REAL_ANGEL;
+		ir->gpio_addr    = MO_GP2_IO;
+		ir->mask_keycode = 0x7e;
+		ir->polling      = 100; /* ms */
+		break;
+	case CX88_BOARD_TWINHAN_VP1027_DVBS:
+		ir_codes         = RC_MAP_TWINHAN_VP1027_DVBS;
+		ir->sampling     = 0xff00; /* address */
+		break;
+	}
+
+	if (!ir_codes) {
+		err = -ENODEV;
+		goto err_out_free;
+	}
+
+	/*
+	 * The usage of mask_keycode were very convenient, due to several
+	 * reasons. Among others, the scancode tables were using the scancode
+	 * as the index elements. So, the less bits it was used, the smaller
+	 * the table were stored. After the input changes, the better is to use
+	 * the full scancodes, since it allows replacing the IR remote by
+	 * another one. Unfortunately, there are still some hardware, like
+	 * Pixelview Ultra Pro, where only part of the scancode is sent via
+	 * GPIO. So, there's no way to get the full scancode. Due to that,
+	 * hardware_mask were introduced here: it represents those hardware
+	 * that has such limits.
+	 */
+	if (hardware_mask && !ir->mask_keycode)
+		ir->mask_keycode = hardware_mask;
+
+	/* init input device */
+	snprintf(ir->name, sizeof(ir->name), "cx88 IR (%s)", core->board.name);
+	snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0", pci_name(pci));
+
+	dev->device_name = ir->name;
+	dev->input_phys = ir->phys;
+	dev->input_id.bustype = BUS_PCI;
+	dev->input_id.version = 1;
+	if (pci->subsystem_vendor) {
+		dev->input_id.vendor = pci->subsystem_vendor;
+		dev->input_id.product = pci->subsystem_device;
+	} else {
+		dev->input_id.vendor = pci->vendor;
+		dev->input_id.product = pci->device;
+	}
+	dev->dev.parent = &pci->dev;
+	dev->map_name = ir_codes;
+	dev->driver_name = MODULE_NAME;
+	dev->priv = core;
+	dev->open = cx88_ir_open;
+	dev->close = cx88_ir_close;
+	dev->scancode_mask = hardware_mask;
+
+	if (ir->sampling) {
+		dev->timeout = MS_TO_US(10); /* 10 ms */
+	} else {
+		dev->driver_type = RC_DRIVER_SCANCODE;
+		dev->allowed_protocols = rc_proto;
+	}
+
+	ir->core = core;
+	core->ir = ir;
+
+	/* all done */
+	err = rc_register_device(dev);
+	if (err)
+		goto err_out_free;
+
+	return 0;
+
+err_out_free:
+	rc_free_device(dev);
+	core->ir = NULL;
+	kfree(ir);
+	return err;
+}
+
+int cx88_ir_fini(struct cx88_core *core)
+{
+	struct cx88_IR *ir = core->ir;
+
+	/* skip detach on non attached boards */
+	if (!ir)
+		return 0;
+
+	cx88_ir_stop(core);
+	rc_unregister_device(ir->dev);
+	kfree(ir);
+
+	/* done */
+	core->ir = NULL;
+	return 0;
+}
+
+/* ---------------------------------------------------------------------- */
+
+void cx88_ir_irq(struct cx88_core *core)
+{
+	struct cx88_IR *ir = core->ir;
+	u32 samples;
+	unsigned int todo, bits;
+	struct ir_raw_event ev = {};
+
+	if (!ir || !ir->sampling)
+		return;
+
+	/*
+	 * Samples are stored in a 32 bit register, oldest sample in
+	 * the msb. A set bit represents space and an unset bit
+	 * represents a pulse.
+	 */
+	samples = cx_read(MO_SAMPLE_IO);
+
+	if (samples == 0xff && ir->dev->idle)
+		return;
+
+	for (todo = 32; todo > 0; todo -= bits) {
+		ev.pulse = samples & 0x80000000 ? false : true;
+		bits = min(todo, 32U - fls(ev.pulse ? samples : ~samples));
+		ev.duration = (bits * (USEC_PER_SEC / 1000)) / ir_samplerate;
+		ir_raw_event_store_with_filter(ir->dev, &ev);
+		samples <<= bits;
+	}
+	ir_raw_event_handle(ir->dev);
+}
+
+static int get_key_pvr2000(struct IR_i2c *ir, enum rc_proto *protocol,
+			   u32 *scancode, u8 *toggle)
+{
+	int flags, code;
+
+	/* poll IR chip */
+	flags = i2c_smbus_read_byte_data(ir->c, 0x10);
+	if (flags < 0) {
+		dprintk("read error\n");
+		return 0;
+	}
+	/* key pressed ? */
+	if (0 == (flags & 0x80))
+		return 0;
+
+	/* read actual key code */
+	code = i2c_smbus_read_byte_data(ir->c, 0x00);
+	if (code < 0) {
+		dprintk("read error\n");
+		return 0;
+	}
+
+	dprintk("IR Key/Flags: (0x%02x/0x%02x)\n",
+		code & 0xff, flags & 0xff);
+
+	*protocol = RC_PROTO_UNKNOWN;
+	*scancode = code & 0xff;
+	*toggle = 0;
+	return 1;
+}
+
+void cx88_i2c_init_ir(struct cx88_core *core)
+{
+	struct i2c_board_info info;
+	static const unsigned short default_addr_list[] = {
+		0x18, 0x33, 0x6b, 0x71,
+		I2C_CLIENT_END
+	};
+	static const unsigned short pvr2000_addr_list[] = {
+		0x18, 0x1a,
+		I2C_CLIENT_END
+	};
+	const unsigned short *addr_list = default_addr_list;
+	const unsigned short *addrp;
+	/* Instantiate the IR receiver device, if present */
+	if (core->i2c_rc != 0)
+		return;
+
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	strscpy(info.type, "ir_video", I2C_NAME_SIZE);
+
+	switch (core->boardnr) {
+	case CX88_BOARD_LEADTEK_PVR2000:
+		addr_list = pvr2000_addr_list;
+		core->init_data.name = "cx88 Leadtek PVR 2000 remote";
+		core->init_data.type = RC_PROTO_BIT_UNKNOWN;
+		core->init_data.get_key = get_key_pvr2000;
+		core->init_data.ir_codes = RC_MAP_EMPTY;
+		break;
+	}
+
+	/*
+	 * We can't call i2c_new_scanned_device() because it uses
+	 * quick writes for probing and at least some RC receiver
+	 * devices only reply to reads.
+	 * Also, Hauppauge XVR needs to be specified, as address 0x71
+	 * conflicts with another remote type used with saa7134
+	 */
+	for (addrp = addr_list; *addrp != I2C_CLIENT_END; addrp++) {
+		info.platform_data = NULL;
+		memset(&core->init_data, 0, sizeof(core->init_data));
+
+		if (*addrp == 0x71) {
+			/* Hauppauge Z8F0811 */
+			strscpy(info.type, "ir_z8f0811_haup", I2C_NAME_SIZE);
+			core->init_data.name = core->board.name;
+			core->init_data.ir_codes = RC_MAP_HAUPPAUGE;
+			core->init_data.type = RC_PROTO_BIT_RC5 |
+				RC_PROTO_BIT_RC6_MCE | RC_PROTO_BIT_RC6_6A_32;
+			core->init_data.internal_get_key_func = IR_KBD_GET_KEY_HAUP_XVR;
+
+			info.platform_data = &core->init_data;
+		}
+		if (i2c_smbus_xfer(&core->i2c_adap, *addrp, 0,
+				   I2C_SMBUS_READ, 0,
+				   I2C_SMBUS_QUICK, NULL) >= 0) {
+			info.addr = *addrp;
+			i2c_new_client_device(&core->i2c_adap, &info);
+			break;
+		}
+	}
+}
+
+/* ---------------------------------------------------------------------- */
+
+MODULE_AUTHOR("Gerd Knorr, Pavel Machek, Chris Pascoe");
+MODULE_DESCRIPTION("input driver for cx88 GPIO-based IR remote controls");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/pci/cx88/cx88-mpeg.c b/drivers/media/pci/cx88/cx88-mpeg.c
new file mode 100644
index 000000000..2c1d5137a
--- /dev/null
+++ b/drivers/media/pci/cx88/cx88-mpeg.c
@@ -0,0 +1,807 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *
+ *  Support for the mpeg transport stream transfers
+ *  PCI function #2 of the cx2388x.
+ *
+ *    (c) 2004 Jelle Foks <jelle@foks.us>
+ *    (c) 2004 Chris Pascoe <c.pascoe@itee.uq.edu.au>
+ *    (c) 2004 Gerd Knorr <kraxel@bytesex.org>
+ */
+
+#include "cx88.h"
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+
+/* ------------------------------------------------------------------ */
+
+MODULE_DESCRIPTION("mpeg driver for cx2388x based TV cards");
+MODULE_AUTHOR("Jelle Foks <jelle@foks.us>");
+MODULE_AUTHOR("Chris Pascoe <c.pascoe@itee.uq.edu.au>");
+MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(CX88_VERSION);
+
+static unsigned int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "enable debug messages [mpeg]");
+
+#define dprintk(level, fmt, arg...) do {				\
+	if (debug + 1 > level)						\
+		printk(KERN_DEBUG pr_fmt("%s: mpeg:" fmt),		\
+			__func__, ##arg);				\
+} while (0)
+
+#if defined(CONFIG_MODULES) && defined(MODULE)
+static void request_module_async(struct work_struct *work)
+{
+	struct cx8802_dev *dev = container_of(work, struct cx8802_dev,
+					      request_module_wk);
+
+	if (dev->core->board.mpeg & CX88_MPEG_DVB)
+		request_module("cx88-dvb");
+	if (dev->core->board.mpeg & CX88_MPEG_BLACKBIRD)
+		request_module("cx88-blackbird");
+}
+
+static void request_modules(struct cx8802_dev *dev)
+{
+	INIT_WORK(&dev->request_module_wk, request_module_async);
+	schedule_work(&dev->request_module_wk);
+}
+
+static void flush_request_modules(struct cx8802_dev *dev)
+{
+	flush_work(&dev->request_module_wk);
+}
+#else
+#define request_modules(dev)
+#define flush_request_modules(dev)
+#endif /* CONFIG_MODULES */
+
+static LIST_HEAD(cx8802_devlist);
+static DEFINE_MUTEX(cx8802_mutex);
+/* ------------------------------------------------------------------ */
+
+int cx8802_start_dma(struct cx8802_dev    *dev,
+		     struct cx88_dmaqueue *q,
+		     struct cx88_buffer   *buf)
+{
+	struct cx88_core *core = dev->core;
+
+	dprintk(1, "w: %d, h: %d, f: %d\n",
+		core->width, core->height, core->field);
+
+	/* setup fifo + format */
+	cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH28],
+				dev->ts_packet_size, buf->risc.dma);
+
+	/* write TS length to chip */
+	cx_write(MO_TS_LNGTH, dev->ts_packet_size);
+
+	/*
+	 * FIXME: this needs a review.
+	 * also: move to cx88-blackbird + cx88-dvb source files?
+	 */
+
+	dprintk(1, "core->active_type_id = 0x%08x\n", core->active_type_id);
+
+	if ((core->active_type_id == CX88_MPEG_DVB) &&
+	    (core->board.mpeg & CX88_MPEG_DVB)) {
+		dprintk(1, "cx8802_start_dma doing .dvb\n");
+		/* negedge driven & software reset */
+		cx_write(TS_GEN_CNTRL, 0x0040 | dev->ts_gen_cntrl);
+		udelay(100);
+		cx_write(MO_PINMUX_IO, 0x00);
+		cx_write(TS_HW_SOP_CNTRL, 0x47 << 16 | 188 << 4 | 0x01);
+		switch (core->boardnr) {
+		case CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q:
+		case CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T:
+		case CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD:
+		case CX88_BOARD_PCHDTV_HD5500:
+			cx_write(TS_SOP_STAT, 1 << 13);
+			break;
+		case CX88_BOARD_SAMSUNG_SMT_7020:
+			cx_write(TS_SOP_STAT, 0x00);
+			break;
+		case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1:
+		case CX88_BOARD_HAUPPAUGE_NOVASE2_S1:
+			/* Enable MPEG parallel IO and video signal pins */
+			cx_write(MO_PINMUX_IO, 0x88);
+			udelay(100);
+			break;
+		case CX88_BOARD_HAUPPAUGE_HVR1300:
+			/* Enable MPEG parallel IO and video signal pins */
+			cx_write(MO_PINMUX_IO, 0x88);
+			cx_write(TS_SOP_STAT, 0);
+			cx_write(TS_VALERR_CNTRL, 0);
+			break;
+		case CX88_BOARD_PINNACLE_PCTV_HD_800i:
+			/* Enable MPEG parallel IO and video signal pins */
+			cx_write(MO_PINMUX_IO, 0x88);
+			cx_write(TS_HW_SOP_CNTRL, (0x47 << 16) | (188 << 4));
+			dev->ts_gen_cntrl = 5;
+			cx_write(TS_SOP_STAT, 0);
+			cx_write(TS_VALERR_CNTRL, 0);
+			udelay(100);
+			break;
+		default:
+			cx_write(TS_SOP_STAT, 0x00);
+			break;
+		}
+		cx_write(TS_GEN_CNTRL, dev->ts_gen_cntrl);
+		udelay(100);
+	} else if ((core->active_type_id == CX88_MPEG_BLACKBIRD) &&
+		(core->board.mpeg & CX88_MPEG_BLACKBIRD)) {
+		dprintk(1, "cx8802_start_dma doing .blackbird\n");
+		cx_write(MO_PINMUX_IO, 0x88); /* enable MPEG parallel IO */
+
+		/* punctured clock TS & posedge driven & software reset */
+		cx_write(TS_GEN_CNTRL, 0x46);
+		udelay(100);
+
+		cx_write(TS_HW_SOP_CNTRL, 0x408); /* mpeg start byte */
+		cx_write(TS_VALERR_CNTRL, 0x2000);
+
+		/* punctured clock TS & posedge driven */
+		cx_write(TS_GEN_CNTRL, 0x06);
+		udelay(100);
+	} else {
+		pr_err("%s() Failed. Unsupported value in .mpeg (0x%08x)\n",
+		       __func__, core->board.mpeg);
+		return -EINVAL;
+	}
+
+	/* reset counter */
+	cx_write(MO_TS_GPCNTRL, GP_COUNT_CONTROL_RESET);
+	q->count = 0;
+
+	/* clear interrupt status register */
+	cx_write(MO_TS_INTSTAT,  0x1f1111);
+
+	/* enable irqs */
+	dprintk(1, "setting the interrupt mask\n");
+	cx_set(MO_PCI_INTMSK, core->pci_irqmask | PCI_INT_TSINT);
+	cx_set(MO_TS_INTMSK,  0x1f0011);
+
+	/* start dma */
+	cx_set(MO_DEV_CNTRL2, (1 << 5));
+	cx_set(MO_TS_DMACNTRL, 0x11);
+	return 0;
+}
+EXPORT_SYMBOL(cx8802_start_dma);
+
+static int cx8802_stop_dma(struct cx8802_dev *dev)
+{
+	struct cx88_core *core = dev->core;
+
+	dprintk(1, "\n");
+
+	/* stop dma */
+	cx_clear(MO_TS_DMACNTRL, 0x11);
+
+	/* disable irqs */
+	cx_clear(MO_PCI_INTMSK, PCI_INT_TSINT);
+	cx_clear(MO_TS_INTMSK, 0x1f0011);
+
+	/* Reset the controller */
+	cx_write(TS_GEN_CNTRL, 0xcd);
+	return 0;
+}
+
+static int cx8802_restart_queue(struct cx8802_dev    *dev,
+				struct cx88_dmaqueue *q)
+{
+	struct cx88_buffer *buf;
+
+	dprintk(1, "\n");
+	if (list_empty(&q->active))
+		return 0;
+
+	buf = list_entry(q->active.next, struct cx88_buffer, list);
+	dprintk(2, "restart_queue [%p/%d]: restart dma\n",
+		buf, buf->vb.vb2_buf.index);
+	cx8802_start_dma(dev, q, buf);
+	return 0;
+}
+
+/* ------------------------------------------------------------------ */
+
+int cx8802_buf_prepare(struct vb2_queue *q, struct cx8802_dev *dev,
+		       struct cx88_buffer *buf)
+{
+	int size = dev->ts_packet_size * dev->ts_packet_count;
+	struct sg_table *sgt = vb2_dma_sg_plane_desc(&buf->vb.vb2_buf, 0);
+	struct cx88_riscmem *risc = &buf->risc;
+	int rc;
+
+	if (vb2_plane_size(&buf->vb.vb2_buf, 0) < size)
+		return -EINVAL;
+	vb2_set_plane_payload(&buf->vb.vb2_buf, 0, size);
+
+	rc = cx88_risc_databuffer(dev->pci, risc, sgt->sgl,
+				  dev->ts_packet_size, dev->ts_packet_count, 0);
+	if (rc) {
+		if (risc->cpu)
+			dma_free_coherent(&dev->pci->dev, risc->size,
+					  risc->cpu, risc->dma);
+		memset(risc, 0, sizeof(*risc));
+		return rc;
+	}
+	return 0;
+}
+EXPORT_SYMBOL(cx8802_buf_prepare);
+
+void cx8802_buf_queue(struct cx8802_dev *dev, struct cx88_buffer *buf)
+{
+	struct cx88_buffer    *prev;
+	struct cx88_dmaqueue  *cx88q = &dev->mpegq;
+
+	dprintk(1, "\n");
+	/* add jump to start */
+	buf->risc.cpu[1] = cpu_to_le32(buf->risc.dma + 8);
+	buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_CNT_INC);
+	buf->risc.jmp[1] = cpu_to_le32(buf->risc.dma + 8);
+
+	if (list_empty(&cx88q->active)) {
+		dprintk(1, "queue is empty - first active\n");
+		list_add_tail(&buf->list, &cx88q->active);
+		dprintk(1, "[%p/%d] %s - first active\n",
+			buf, buf->vb.vb2_buf.index, __func__);
+
+	} else {
+		buf->risc.cpu[0] |= cpu_to_le32(RISC_IRQ1);
+		dprintk(1, "queue is not empty - append to active\n");
+		prev = list_entry(cx88q->active.prev, struct cx88_buffer, list);
+		list_add_tail(&buf->list, &cx88q->active);
+		prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma);
+		dprintk(1, "[%p/%d] %s - append to active\n",
+			buf, buf->vb.vb2_buf.index, __func__);
+	}
+}
+EXPORT_SYMBOL(cx8802_buf_queue);
+
+/* ----------------------------------------------------------- */
+
+static void do_cancel_buffers(struct cx8802_dev *dev)
+{
+	struct cx88_dmaqueue *q = &dev->mpegq;
+	struct cx88_buffer *buf;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev->slock, flags);
+	while (!list_empty(&q->active)) {
+		buf = list_entry(q->active.next, struct cx88_buffer, list);
+		list_del(&buf->list);
+		vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+	}
+	spin_unlock_irqrestore(&dev->slock, flags);
+}
+
+void cx8802_cancel_buffers(struct cx8802_dev *dev)
+{
+	dprintk(1, "\n");
+	cx8802_stop_dma(dev);
+	do_cancel_buffers(dev);
+}
+EXPORT_SYMBOL(cx8802_cancel_buffers);
+
+static const char *cx88_mpeg_irqs[32] = {
+	"ts_risci1", NULL, NULL, NULL,
+	"ts_risci2", NULL, NULL, NULL,
+	"ts_oflow",  NULL, NULL, NULL,
+	"ts_sync",   NULL, NULL, NULL,
+	"opc_err", "par_err", "rip_err", "pci_abort",
+	"ts_err?",
+};
+
+static void cx8802_mpeg_irq(struct cx8802_dev *dev)
+{
+	struct cx88_core *core = dev->core;
+	u32 status, mask, count;
+
+	dprintk(1, "\n");
+	status = cx_read(MO_TS_INTSTAT);
+	mask   = cx_read(MO_TS_INTMSK);
+	if (0 == (status & mask))
+		return;
+
+	cx_write(MO_TS_INTSTAT, status);
+
+	if (debug || (status & mask & ~0xff))
+		cx88_print_irqbits("irq mpeg ",
+				   cx88_mpeg_irqs, ARRAY_SIZE(cx88_mpeg_irqs),
+				   status, mask);
+
+	/* risc op code error */
+	if (status & (1 << 16)) {
+		pr_warn("mpeg risc op code error\n");
+		cx_clear(MO_TS_DMACNTRL, 0x11);
+		cx88_sram_channel_dump(dev->core,
+				       &cx88_sram_channels[SRAM_CH28]);
+	}
+
+	/* risc1 y */
+	if (status & 0x01) {
+		dprintk(1, "wake up\n");
+		spin_lock(&dev->slock);
+		count = cx_read(MO_TS_GPCNT);
+		cx88_wakeup(dev->core, &dev->mpegq, count);
+		spin_unlock(&dev->slock);
+	}
+
+	/* other general errors */
+	if (status & 0x1f0100) {
+		dprintk(0, "general errors: 0x%08x\n", status & 0x1f0100);
+		spin_lock(&dev->slock);
+		cx8802_stop_dma(dev);
+		spin_unlock(&dev->slock);
+	}
+}
+
+#define MAX_IRQ_LOOP 10
+
+static irqreturn_t cx8802_irq(int irq, void *dev_id)
+{
+	struct cx8802_dev *dev = dev_id;
+	struct cx88_core *core = dev->core;
+	u32 status;
+	int loop, handled = 0;
+
+	for (loop = 0; loop < MAX_IRQ_LOOP; loop++) {
+		status = cx_read(MO_PCI_INTSTAT) &
+			(core->pci_irqmask | PCI_INT_TSINT);
+		if (status == 0)
+			goto out;
+		dprintk(1, "cx8802_irq\n");
+		dprintk(1, "    loop: %d/%d\n", loop, MAX_IRQ_LOOP);
+		dprintk(1, "    status: %d\n", status);
+		handled = 1;
+		cx_write(MO_PCI_INTSTAT, status);
+
+		if (status & core->pci_irqmask)
+			cx88_core_irq(core, status);
+		if (status & PCI_INT_TSINT)
+			cx8802_mpeg_irq(dev);
+	}
+	if (loop == MAX_IRQ_LOOP) {
+		dprintk(0, "clearing mask\n");
+		pr_warn("irq loop -- clearing mask\n");
+		cx_write(MO_PCI_INTMSK, 0);
+	}
+
+ out:
+	return IRQ_RETVAL(handled);
+}
+
+static int cx8802_init_common(struct cx8802_dev *dev)
+{
+	struct cx88_core *core = dev->core;
+	int err;
+
+	/* pci init */
+	if (pci_enable_device(dev->pci))
+		return -EIO;
+	pci_set_master(dev->pci);
+	err = dma_set_mask(&dev->pci->dev, DMA_BIT_MASK(32));
+	if (err) {
+		pr_err("Oops: no 32bit PCI DMA ???\n");
+		return -EIO;
+	}
+
+	dev->pci_rev = dev->pci->revision;
+	pci_read_config_byte(dev->pci, PCI_LATENCY_TIMER,  &dev->pci_lat);
+	pr_info("found at %s, rev: %d, irq: %d, latency: %d, mmio: 0x%llx\n",
+		pci_name(dev->pci), dev->pci_rev, dev->pci->irq,
+		dev->pci_lat,
+		(unsigned long long)pci_resource_start(dev->pci, 0));
+
+	/* initialize driver struct */
+	spin_lock_init(&dev->slock);
+
+	/* init dma queue */
+	INIT_LIST_HEAD(&dev->mpegq.active);
+
+	/* get irq */
+	err = request_irq(dev->pci->irq, cx8802_irq,
+			  IRQF_SHARED, dev->core->name, dev);
+	if (err < 0) {
+		pr_err("can't get IRQ %d\n", dev->pci->irq);
+		return err;
+	}
+	cx_set(MO_PCI_INTMSK, core->pci_irqmask);
+
+	/* everything worked */
+	pci_set_drvdata(dev->pci, dev);
+	return 0;
+}
+
+static void cx8802_fini_common(struct cx8802_dev *dev)
+{
+	dprintk(2, "\n");
+	cx8802_stop_dma(dev);
+	pci_disable_device(dev->pci);
+
+	/* unregister stuff */
+	free_irq(dev->pci->irq, dev);
+}
+
+/* ----------------------------------------------------------- */
+
+static int cx8802_suspend_common(struct pci_dev *pci_dev, pm_message_t state)
+{
+	struct cx8802_dev *dev = pci_get_drvdata(pci_dev);
+	unsigned long flags;
+
+	/* stop mpeg dma */
+	spin_lock_irqsave(&dev->slock, flags);
+	if (!list_empty(&dev->mpegq.active)) {
+		dprintk(2, "suspend\n");
+		pr_info("suspend mpeg\n");
+		cx8802_stop_dma(dev);
+	}
+	spin_unlock_irqrestore(&dev->slock, flags);
+
+	/* FIXME -- shutdown device */
+	cx88_shutdown(dev->core);
+
+	pci_save_state(pci_dev);
+	if (pci_set_power_state(pci_dev,
+				pci_choose_state(pci_dev, state)) != 0) {
+		pci_disable_device(pci_dev);
+		dev->state.disabled = 1;
+	}
+	return 0;
+}
+
+static int cx8802_resume_common(struct pci_dev *pci_dev)
+{
+	struct cx8802_dev *dev = pci_get_drvdata(pci_dev);
+	unsigned long flags;
+	int err;
+
+	if (dev->state.disabled) {
+		err = pci_enable_device(pci_dev);
+		if (err) {
+			pr_err("can't enable device\n");
+			return err;
+		}
+		dev->state.disabled = 0;
+	}
+	err = pci_set_power_state(pci_dev, PCI_D0);
+	if (err) {
+		pr_err("can't enable device\n");
+		pci_disable_device(pci_dev);
+		dev->state.disabled = 1;
+
+		return err;
+	}
+	pci_restore_state(pci_dev);
+
+	/* FIXME: re-initialize hardware */
+	cx88_reset(dev->core);
+
+	/* restart video+vbi capture */
+	spin_lock_irqsave(&dev->slock, flags);
+	if (!list_empty(&dev->mpegq.active)) {
+		pr_info("resume mpeg\n");
+		cx8802_restart_queue(dev, &dev->mpegq);
+	}
+	spin_unlock_irqrestore(&dev->slock, flags);
+
+	return 0;
+}
+
+struct cx8802_driver *cx8802_get_driver(struct cx8802_dev *dev,
+					enum cx88_board_type btype)
+{
+	struct cx8802_driver *d;
+
+	list_for_each_entry(d, &dev->drvlist, drvlist)
+		if (d->type_id == btype)
+			return d;
+
+	return NULL;
+}
+EXPORT_SYMBOL(cx8802_get_driver);
+
+/* Driver asked for hardware access. */
+static int cx8802_request_acquire(struct cx8802_driver *drv)
+{
+	struct cx88_core *core = drv->core;
+	unsigned int	i;
+
+	/* Fail a request for hardware if the device is busy. */
+	if (core->active_type_id != CX88_BOARD_NONE &&
+	    core->active_type_id != drv->type_id)
+		return -EBUSY;
+
+	if (drv->type_id == CX88_MPEG_DVB) {
+		/* When switching to DVB, always set the input to the tuner */
+		core->last_analog_input = core->input;
+		core->input = 0;
+		for (i = 0;
+		     i < ARRAY_SIZE(core->board.input);
+		     i++) {
+			if (core->board.input[i].type == CX88_VMUX_DVB) {
+				core->input = i;
+				break;
+			}
+		}
+	}
+
+	if (drv->advise_acquire) {
+		core->active_ref++;
+		if (core->active_type_id == CX88_BOARD_NONE) {
+			core->active_type_id = drv->type_id;
+			drv->advise_acquire(drv);
+		}
+
+		dprintk(1, "Post acquire GPIO=%x\n", cx_read(MO_GP0_IO));
+	}
+
+	return 0;
+}
+
+/* Driver asked to release hardware. */
+static int cx8802_request_release(struct cx8802_driver *drv)
+{
+	struct cx88_core *core = drv->core;
+
+	if (drv->advise_release && --core->active_ref == 0) {
+		if (drv->type_id == CX88_MPEG_DVB) {
+			/*
+			 * If the DVB driver is releasing, reset the input
+			 * state to the last configured analog input
+			 */
+			core->input = core->last_analog_input;
+		}
+
+		drv->advise_release(drv);
+		core->active_type_id = CX88_BOARD_NONE;
+		dprintk(1, "Post release GPIO=%x\n", cx_read(MO_GP0_IO));
+	}
+
+	return 0;
+}
+
+static int cx8802_check_driver(struct cx8802_driver *drv)
+{
+	if (!drv)
+		return -ENODEV;
+
+	if ((drv->type_id != CX88_MPEG_DVB) &&
+	    (drv->type_id != CX88_MPEG_BLACKBIRD))
+		return -EINVAL;
+
+	if ((drv->hw_access != CX8802_DRVCTL_SHARED) &&
+	    (drv->hw_access != CX8802_DRVCTL_EXCLUSIVE))
+		return -EINVAL;
+
+	if ((!drv->probe) ||
+	    (!drv->remove) ||
+	    (!drv->advise_acquire) ||
+	    (!drv->advise_release))
+		return -EINVAL;
+
+	return 0;
+}
+
+int cx8802_register_driver(struct cx8802_driver *drv)
+{
+	struct cx8802_dev *dev;
+	struct cx8802_driver *driver;
+	int err, i = 0;
+
+	pr_info("registering cx8802 driver, type: %s access: %s\n",
+		drv->type_id == CX88_MPEG_DVB ? "dvb" : "blackbird",
+		drv->hw_access == CX8802_DRVCTL_SHARED ?
+				  "shared" : "exclusive");
+
+	err = cx8802_check_driver(drv);
+	if (err) {
+		pr_err("cx8802_driver is invalid\n");
+		return err;
+	}
+
+	mutex_lock(&cx8802_mutex);
+
+	list_for_each_entry(dev, &cx8802_devlist, devlist) {
+		pr_info("subsystem: %04x:%04x, board: %s [card=%d]\n",
+			dev->pci->subsystem_vendor,
+			dev->pci->subsystem_device, dev->core->board.name,
+			dev->core->boardnr);
+
+		/* Bring up a new struct for each driver instance */
+		driver = kzalloc(sizeof(*drv), GFP_KERNEL);
+		if (!driver) {
+			err = -ENOMEM;
+			goto out;
+		}
+
+		/* Snapshot of the driver registration data */
+		drv->core = dev->core;
+		drv->suspend = cx8802_suspend_common;
+		drv->resume = cx8802_resume_common;
+		drv->request_acquire = cx8802_request_acquire;
+		drv->request_release = cx8802_request_release;
+		memcpy(driver, drv, sizeof(*driver));
+
+		mutex_lock(&drv->core->lock);
+		err = drv->probe(driver);
+		if (err == 0) {
+			i++;
+			list_add_tail(&driver->drvlist, &dev->drvlist);
+		} else {
+			pr_err("cx8802 probe failed, err = %d\n", err);
+		}
+		mutex_unlock(&drv->core->lock);
+	}
+
+	err = i ? 0 : -ENODEV;
+out:
+	mutex_unlock(&cx8802_mutex);
+	return err;
+}
+EXPORT_SYMBOL(cx8802_register_driver);
+
+int cx8802_unregister_driver(struct cx8802_driver *drv)
+{
+	struct cx8802_dev *dev;
+	struct cx8802_driver *d, *dtmp;
+	int err = 0;
+
+	pr_info("unregistering cx8802 driver, type: %s access: %s\n",
+		drv->type_id == CX88_MPEG_DVB ? "dvb" : "blackbird",
+		drv->hw_access == CX8802_DRVCTL_SHARED ?
+				  "shared" : "exclusive");
+
+	mutex_lock(&cx8802_mutex);
+
+	list_for_each_entry(dev, &cx8802_devlist, devlist) {
+		pr_info("subsystem: %04x:%04x, board: %s [card=%d]\n",
+			dev->pci->subsystem_vendor,
+			dev->pci->subsystem_device, dev->core->board.name,
+			dev->core->boardnr);
+
+		mutex_lock(&dev->core->lock);
+
+		list_for_each_entry_safe(d, dtmp, &dev->drvlist, drvlist) {
+			/* only unregister the correct driver type */
+			if (d->type_id != drv->type_id)
+				continue;
+
+			err = d->remove(d);
+			if (err == 0) {
+				list_del(&d->drvlist);
+				kfree(d);
+			} else
+				pr_err("cx8802 driver remove failed (%d)\n",
+				       err);
+		}
+
+		mutex_unlock(&dev->core->lock);
+	}
+
+	mutex_unlock(&cx8802_mutex);
+
+	return err;
+}
+EXPORT_SYMBOL(cx8802_unregister_driver);
+
+/* ----------------------------------------------------------- */
+static int cx8802_probe(struct pci_dev *pci_dev,
+			const struct pci_device_id *pci_id)
+{
+	struct cx8802_dev *dev;
+	struct cx88_core  *core;
+	int err;
+
+	/* general setup */
+	core = cx88_core_get(pci_dev);
+	if (!core)
+		return -EINVAL;
+
+	pr_info("cx2388x 8802 Driver Manager\n");
+
+	err = -ENODEV;
+	if (!core->board.mpeg)
+		goto fail_core;
+
+	err = -ENOMEM;
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		goto fail_core;
+	dev->pci = pci_dev;
+	dev->core = core;
+
+	/* Maintain a reference so cx88-video can query the 8802 device. */
+	core->dvbdev = dev;
+
+	err = cx8802_init_common(dev);
+	if (err != 0)
+		goto fail_dev;
+
+	INIT_LIST_HEAD(&dev->drvlist);
+	mutex_lock(&cx8802_mutex);
+	list_add_tail(&dev->devlist, &cx8802_devlist);
+	mutex_unlock(&cx8802_mutex);
+
+	/* now autoload cx88-dvb or cx88-blackbird */
+	request_modules(dev);
+	return 0;
+
+ fail_dev:
+	kfree(dev);
+ fail_core:
+	core->dvbdev = NULL;
+	cx88_core_put(core, pci_dev);
+	return err;
+}
+
+static void cx8802_remove(struct pci_dev *pci_dev)
+{
+	struct cx8802_dev *dev;
+
+	dev = pci_get_drvdata(pci_dev);
+
+	dprintk(1, "%s\n", __func__);
+
+	flush_request_modules(dev);
+
+	mutex_lock(&dev->core->lock);
+
+	if (!list_empty(&dev->drvlist)) {
+		struct cx8802_driver *drv, *tmp;
+		int err;
+
+		pr_warn("Trying to remove cx8802 driver while cx8802 sub-drivers still loaded?!\n");
+
+		list_for_each_entry_safe(drv, tmp, &dev->drvlist, drvlist) {
+			err = drv->remove(drv);
+			if (err == 0) {
+				list_del(&drv->drvlist);
+			} else
+				pr_err("cx8802 driver remove failed (%d)\n",
+				       err);
+			kfree(drv);
+		}
+	}
+
+	mutex_unlock(&dev->core->lock);
+
+	/* Destroy any 8802 reference. */
+	dev->core->dvbdev = NULL;
+
+	/* common */
+	cx8802_fini_common(dev);
+	cx88_core_put(dev->core, dev->pci);
+	kfree(dev);
+}
+
+static const struct pci_device_id cx8802_pci_tbl[] = {
+	{
+		.vendor       = 0x14f1,
+		.device       = 0x8802,
+		.subvendor    = PCI_ANY_ID,
+		.subdevice    = PCI_ANY_ID,
+	}, {
+		/* --- end of list --- */
+	}
+};
+MODULE_DEVICE_TABLE(pci, cx8802_pci_tbl);
+
+static struct pci_driver cx8802_pci_driver = {
+	.name     = "cx88-mpeg driver manager",
+	.id_table = cx8802_pci_tbl,
+	.probe    = cx8802_probe,
+	.remove   = cx8802_remove,
+};
+
+module_pci_driver(cx8802_pci_driver);
diff --git a/drivers/media/pci/cx88/cx88-reg.h b/drivers/media/pci/cx88/cx88-reg.h
new file mode 100644
index 000000000..866f85f86
--- /dev/null
+++ b/drivers/media/pci/cx88/cx88-reg.h
@@ -0,0 +1,816 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * cx88x-hw.h - CX2388x register offsets
+ *
+ * Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de)
+ *		  2001 Michael Eskin
+ *		  2002 Yurij Sysoev <yurij@naturesoft.net>
+ *		  2003 Gerd Knorr <kraxel@bytesex.org>
+ */
+
+#ifndef _CX88_REG_H_
+#define _CX88_REG_H_
+
+/*
+ * PCI IDs and config space
+ */
+
+#ifndef PCI_VENDOR_ID_CONEXANT
+# define PCI_VENDOR_ID_CONEXANT		0x14F1
+#endif
+#ifndef PCI_DEVICE_ID_CX2300_VID
+# define PCI_DEVICE_ID_CX2300_VID	0x8800
+#endif
+
+#define CX88X_DEVCTRL 0x40
+#define CX88X_EN_TBFX 0x02
+#define CX88X_EN_VSFX 0x04
+
+/*
+ * PCI controller registers
+ */
+
+/* Command and Status Register */
+#define F0_CMD_STAT_MM      0x2f0004
+#define F1_CMD_STAT_MM      0x2f0104
+#define F2_CMD_STAT_MM      0x2f0204
+#define F3_CMD_STAT_MM      0x2f0304
+#define F4_CMD_STAT_MM      0x2f0404
+
+/* Device Control #1 */
+#define F0_DEV_CNTRL1_MM    0x2f0040
+#define F1_DEV_CNTRL1_MM    0x2f0140
+#define F2_DEV_CNTRL1_MM    0x2f0240
+#define F3_DEV_CNTRL1_MM    0x2f0340
+#define F4_DEV_CNTRL1_MM    0x2f0440
+
+/* Device Control #1 */
+#define F0_BAR0_MM          0x2f0010
+#define F1_BAR0_MM          0x2f0110
+#define F2_BAR0_MM          0x2f0210
+#define F3_BAR0_MM          0x2f0310
+#define F4_BAR0_MM          0x2f0410
+
+/*
+ * DMA Controller registers
+ */
+
+#define MO_PDMA_STHRSH      0x200000 // Source threshold
+#define MO_PDMA_STADRS      0x200004 // Source target address
+#define MO_PDMA_SIADRS      0x200008 // Source internal address
+#define MO_PDMA_SCNTRL      0x20000C // Source control
+#define MO_PDMA_DTHRSH      0x200010 // Destination threshold
+#define MO_PDMA_DTADRS      0x200014 // Destination target address
+#define MO_PDMA_DIADRS      0x200018 // Destination internal address
+#define MO_PDMA_DCNTRL      0x20001C // Destination control
+#define MO_LD_SSID          0x200030 // Load subsystem ID
+#define MO_DEV_CNTRL2       0x200034 // Device control
+#define MO_PCI_INTMSK       0x200040 // PCI interrupt mask
+#define MO_PCI_INTSTAT      0x200044 // PCI interrupt status
+#define MO_PCI_INTMSTAT     0x200048 // PCI interrupt masked status
+#define MO_VID_INTMSK       0x200050 // Video interrupt mask
+#define MO_VID_INTSTAT      0x200054 // Video interrupt status
+#define MO_VID_INTMSTAT     0x200058 // Video interrupt masked status
+#define MO_VID_INTSSTAT     0x20005C // Video interrupt set status
+#define MO_AUD_INTMSK       0x200060 // Audio interrupt mask
+#define MO_AUD_INTSTAT      0x200064 // Audio interrupt status
+#define MO_AUD_INTMSTAT     0x200068 // Audio interrupt masked status
+#define MO_AUD_INTSSTAT     0x20006C // Audio interrupt set status
+#define MO_TS_INTMSK        0x200070 // Transport stream interrupt mask
+#define MO_TS_INTSTAT       0x200074 // Transport stream interrupt status
+#define MO_TS_INTMSTAT      0x200078 // Transport stream interrupt mask status
+#define MO_TS_INTSSTAT      0x20007C // Transport stream interrupt set status
+#define MO_VIP_INTMSK       0x200080 // VIP interrupt mask
+#define MO_VIP_INTSTAT      0x200084 // VIP interrupt status
+#define MO_VIP_INTMSTAT     0x200088 // VIP interrupt masked status
+#define MO_VIP_INTSSTAT     0x20008C // VIP interrupt set status
+#define MO_GPHST_INTMSK     0x200090 // Host interrupt mask
+#define MO_GPHST_INTSTAT    0x200094 // Host interrupt status
+#define MO_GPHST_INTMSTAT   0x200098 // Host interrupt masked status
+#define MO_GPHST_INTSSTAT   0x20009C // Host interrupt set status
+
+// DMA Channels 1-6 belong to SPIPE
+#define MO_DMA7_PTR1        0x300018 // {24}RW* DMA Current Ptr : Ch#7
+#define MO_DMA8_PTR1        0x30001C // {24}RW* DMA Current Ptr : Ch#8
+
+// DMA Channels 9-20 belong to SPIPE
+#define MO_DMA21_PTR1       0x300080 // {24}R0* DMA Current Ptr : Ch#21
+#define MO_DMA22_PTR1       0x300084 // {24}R0* DMA Current Ptr : Ch#22
+#define MO_DMA23_PTR1       0x300088 // {24}R0* DMA Current Ptr : Ch#23
+#define MO_DMA24_PTR1       0x30008C // {24}R0* DMA Current Ptr : Ch#24
+#define MO_DMA25_PTR1       0x300090 // {24}R0* DMA Current Ptr : Ch#25
+#define MO_DMA26_PTR1       0x300094 // {24}R0* DMA Current Ptr : Ch#26
+#define MO_DMA27_PTR1       0x300098 // {24}R0* DMA Current Ptr : Ch#27
+#define MO_DMA28_PTR1       0x30009C // {24}R0* DMA Current Ptr : Ch#28
+#define MO_DMA29_PTR1       0x3000A0 // {24}R0* DMA Current Ptr : Ch#29
+#define MO_DMA30_PTR1       0x3000A4 // {24}R0* DMA Current Ptr : Ch#30
+#define MO_DMA31_PTR1       0x3000A8 // {24}R0* DMA Current Ptr : Ch#31
+#define MO_DMA32_PTR1       0x3000AC // {24}R0* DMA Current Ptr : Ch#32
+
+#define MO_DMA21_PTR2       0x3000C0 // {24}RW* DMA Tab Ptr : Ch#21
+#define MO_DMA22_PTR2       0x3000C4 // {24}RW* DMA Tab Ptr : Ch#22
+#define MO_DMA23_PTR2       0x3000C8 // {24}RW* DMA Tab Ptr : Ch#23
+#define MO_DMA24_PTR2       0x3000CC // {24}RW* DMA Tab Ptr : Ch#24
+#define MO_DMA25_PTR2       0x3000D0 // {24}RW* DMA Tab Ptr : Ch#25
+#define MO_DMA26_PTR2       0x3000D4 // {24}RW* DMA Tab Ptr : Ch#26
+#define MO_DMA27_PTR2       0x3000D8 // {24}RW* DMA Tab Ptr : Ch#27
+#define MO_DMA28_PTR2       0x3000DC // {24}RW* DMA Tab Ptr : Ch#28
+#define MO_DMA29_PTR2       0x3000E0 // {24}RW* DMA Tab Ptr : Ch#29
+#define MO_DMA30_PTR2       0x3000E4 // {24}RW* DMA Tab Ptr : Ch#30
+#define MO_DMA31_PTR2       0x3000E8 // {24}RW* DMA Tab Ptr : Ch#31
+#define MO_DMA32_PTR2       0x3000EC // {24}RW* DMA Tab Ptr : Ch#32
+
+#define MO_DMA21_CNT1       0x300100 // {11}RW* DMA Buffer Size : Ch#21
+#define MO_DMA22_CNT1       0x300104 // {11}RW* DMA Buffer Size : Ch#22
+#define MO_DMA23_CNT1       0x300108 // {11}RW* DMA Buffer Size : Ch#23
+#define MO_DMA24_CNT1       0x30010C // {11}RW* DMA Buffer Size : Ch#24
+#define MO_DMA25_CNT1       0x300110 // {11}RW* DMA Buffer Size : Ch#25
+#define MO_DMA26_CNT1       0x300114 // {11}RW* DMA Buffer Size : Ch#26
+#define MO_DMA27_CNT1       0x300118 // {11}RW* DMA Buffer Size : Ch#27
+#define MO_DMA28_CNT1       0x30011C // {11}RW* DMA Buffer Size : Ch#28
+#define MO_DMA29_CNT1       0x300120 // {11}RW* DMA Buffer Size : Ch#29
+#define MO_DMA30_CNT1       0x300124 // {11}RW* DMA Buffer Size : Ch#30
+#define MO_DMA31_CNT1       0x300128 // {11}RW* DMA Buffer Size : Ch#31
+#define MO_DMA32_CNT1       0x30012C // {11}RW* DMA Buffer Size : Ch#32
+
+#define MO_DMA21_CNT2       0x300140 // {11}RW* DMA Table Size : Ch#21
+#define MO_DMA22_CNT2       0x300144 // {11}RW* DMA Table Size : Ch#22
+#define MO_DMA23_CNT2       0x300148 // {11}RW* DMA Table Size : Ch#23
+#define MO_DMA24_CNT2       0x30014C // {11}RW* DMA Table Size : Ch#24
+#define MO_DMA25_CNT2       0x300150 // {11}RW* DMA Table Size : Ch#25
+#define MO_DMA26_CNT2       0x300154 // {11}RW* DMA Table Size : Ch#26
+#define MO_DMA27_CNT2       0x300158 // {11}RW* DMA Table Size : Ch#27
+#define MO_DMA28_CNT2       0x30015C // {11}RW* DMA Table Size : Ch#28
+#define MO_DMA29_CNT2       0x300160 // {11}RW* DMA Table Size : Ch#29
+#define MO_DMA30_CNT2       0x300164 // {11}RW* DMA Table Size : Ch#30
+#define MO_DMA31_CNT2       0x300168 // {11}RW* DMA Table Size : Ch#31
+#define MO_DMA32_CNT2       0x30016C // {11}RW* DMA Table Size : Ch#32
+
+/*
+ * Video registers
+ */
+
+#define MO_VIDY_DMA         0x310000 // {64}RWp Video Y
+#define MO_VIDU_DMA         0x310008 // {64}RWp Video U
+#define MO_VIDV_DMA         0x310010 // {64}RWp Video V
+#define MO_VBI_DMA          0x310018 // {64}RWp VBI (Vertical blanking interval)
+
+#define MO_DEVICE_STATUS    0x310100
+#define MO_INPUT_FORMAT     0x310104
+#define MO_AGC_BURST        0x31010c
+#define MO_CONTR_BRIGHT     0x310110
+#define MO_UV_SATURATION    0x310114
+#define MO_HUE              0x310118
+#define MO_HTOTAL           0x310120
+#define MO_HDELAY_EVEN      0x310124
+#define MO_HDELAY_ODD       0x310128
+#define MO_VDELAY_ODD       0x31012c
+#define MO_VDELAY_EVEN      0x310130
+#define MO_HACTIVE_EVEN     0x31013c
+#define MO_HACTIVE_ODD      0x310140
+#define MO_VACTIVE_EVEN     0x310144
+#define MO_VACTIVE_ODD      0x310148
+#define MO_HSCALE_EVEN      0x31014c
+#define MO_HSCALE_ODD       0x310150
+#define MO_VSCALE_EVEN      0x310154
+#define MO_FILTER_EVEN      0x31015c
+#define MO_VSCALE_ODD       0x310158
+#define MO_FILTER_ODD       0x310160
+#define MO_OUTPUT_FORMAT    0x310164
+
+#define MO_PLL_REG          0x310168 // PLL register
+#define MO_PLL_ADJ_CTRL     0x31016c // PLL adjust control register
+#define MO_SCONV_REG        0x310170 // sample rate conversion register
+#define MO_SCONV_FIFO       0x310174 // sample rate conversion fifo
+#define MO_SUB_STEP         0x310178 // subcarrier step size
+#define MO_SUB_STEP_DR      0x31017c // subcarrier step size for DR line
+
+#define MO_CAPTURE_CTRL     0x310180 // capture control
+#define MO_COLOR_CTRL       0x310184
+#define MO_VBI_PACKET       0x310188 // vbi packet size / delay
+#define MO_FIELD_COUNT      0x310190 // field counter
+#define MO_VIP_CONFIG       0x310194
+#define MO_VBOS_CONTROL	    0x3101a8
+
+#define MO_AGC_BACK_VBI     0x310200
+#define MO_AGC_SYNC_TIP1    0x310208
+
+#define MO_VIDY_GPCNT       0x31C020 // {16}RO Video Y general purpose counter
+#define MO_VIDU_GPCNT       0x31C024 // {16}RO Video U general purpose counter
+#define MO_VIDV_GPCNT       0x31C028 // {16}RO Video V general purpose counter
+#define MO_VBI_GPCNT        0x31C02C // {16}RO VBI general purpose counter
+#define MO_VIDY_GPCNTRL     0x31C030 // {2}WO Video Y general purpose control
+#define MO_VIDU_GPCNTRL     0x31C034 // {2}WO Video U general purpose control
+#define MO_VIDV_GPCNTRL     0x31C038 // {2}WO Video V general purpose control
+#define MO_VBI_GPCNTRL      0x31C03C // {2}WO VBI general purpose counter
+#define MO_VID_DMACNTRL     0x31C040 // {8}RW Video DMA control
+#define MO_VID_XFR_STAT     0x31C044 // {1}RO Video transfer status
+
+/*
+ * audio registers
+ */
+
+#define MO_AUDD_DMA         0x320000 // {64}RWp Audio downstream
+#define MO_AUDU_DMA         0x320008 // {64}RWp Audio upstream
+#define MO_AUDR_DMA         0x320010 // {64}RWp Audio RDS (downstream)
+#define MO_AUDD_GPCNT       0x32C020 // {16}RO Audio down general purpose counter
+#define MO_AUDU_GPCNT       0x32C024 // {16}RO Audio up general purpose counter
+#define MO_AUDR_GPCNT       0x32C028 // {16}RO Audio RDS general purpose counter
+#define MO_AUDD_GPCNTRL     0x32C030 // {2}WO Audio down general purpose control
+#define MO_AUDU_GPCNTRL     0x32C034 // {2}WO Audio up general purpose control
+#define MO_AUDR_GPCNTRL     0x32C038 // {2}WO Audio RDS general purpose control
+#define MO_AUD_DMACNTRL     0x32C040 // {6}RW Audio DMA control
+#define MO_AUD_XFR_STAT     0x32C044 // {1}RO Audio transfer status
+#define MO_AUDD_LNGTH       0x32C048 // {12}RW Audio down line length
+#define MO_AUDR_LNGTH       0x32C04C // {12}RW Audio RDS line length
+
+#define AUD_INIT                 0x320100
+#define AUD_INIT_LD              0x320104
+#define AUD_SOFT_RESET           0x320108
+#define AUD_I2SINPUTCNTL         0x320120
+#define AUD_BAUDRATE             0x320124
+#define AUD_I2SOUTPUTCNTL        0x320128
+#define AAGC_HYST                0x320134
+#define AAGC_GAIN                0x320138
+#define AAGC_DEF                 0x32013c
+#define AUD_IIR1_0_SEL           0x320150
+#define AUD_IIR1_0_SHIFT         0x320154
+#define AUD_IIR1_1_SEL           0x320158
+#define AUD_IIR1_1_SHIFT         0x32015c
+#define AUD_IIR1_2_SEL           0x320160
+#define AUD_IIR1_2_SHIFT         0x320164
+#define AUD_IIR1_3_SEL           0x320168
+#define AUD_IIR1_3_SHIFT         0x32016c
+#define AUD_IIR1_4_SEL           0x320170
+#define AUD_IIR1_4_SHIFT         0x32017c
+#define AUD_IIR1_5_SEL           0x320180
+#define AUD_IIR1_5_SHIFT         0x320184
+#define AUD_IIR2_0_SEL           0x320190
+#define AUD_IIR2_0_SHIFT         0x320194
+#define AUD_IIR2_1_SEL           0x320198
+#define AUD_IIR2_1_SHIFT         0x32019c
+#define AUD_IIR2_2_SEL           0x3201a0
+#define AUD_IIR2_2_SHIFT         0x3201a4
+#define AUD_IIR2_3_SEL           0x3201a8
+#define AUD_IIR2_3_SHIFT         0x3201ac
+#define AUD_IIR3_0_SEL           0x3201c0
+#define AUD_IIR3_0_SHIFT         0x3201c4
+#define AUD_IIR3_1_SEL           0x3201c8
+#define AUD_IIR3_1_SHIFT         0x3201cc
+#define AUD_IIR3_2_SEL           0x3201d0
+#define AUD_IIR3_2_SHIFT         0x3201d4
+#define AUD_IIR4_0_SEL           0x3201e0
+#define AUD_IIR4_0_SHIFT         0x3201e4
+#define AUD_IIR4_1_SEL           0x3201e8
+#define AUD_IIR4_1_SHIFT         0x3201ec
+#define AUD_IIR4_2_SEL           0x3201f0
+#define AUD_IIR4_2_SHIFT         0x3201f4
+#define AUD_IIR4_0_CA0           0x320200
+#define AUD_IIR4_0_CA1           0x320204
+#define AUD_IIR4_0_CA2           0x320208
+#define AUD_IIR4_0_CB0           0x32020c
+#define AUD_IIR4_0_CB1           0x320210
+#define AUD_IIR4_1_CA0           0x320214
+#define AUD_IIR4_1_CA1           0x320218
+#define AUD_IIR4_1_CA2           0x32021c
+#define AUD_IIR4_1_CB0           0x320220
+#define AUD_IIR4_1_CB1           0x320224
+#define AUD_IIR4_2_CA0           0x320228
+#define AUD_IIR4_2_CA1           0x32022c
+#define AUD_IIR4_2_CA2           0x320230
+#define AUD_IIR4_2_CB0           0x320234
+#define AUD_IIR4_2_CB1           0x320238
+#define AUD_HP_MD_IIR4_1         0x320250
+#define AUD_HP_PROG_IIR4_1       0x320254
+#define AUD_FM_MODE_ENABLE       0x320258
+#define AUD_POLY0_DDS_CONSTANT   0x320270
+#define AUD_DN0_FREQ             0x320274
+#define AUD_DN1_FREQ             0x320278
+#define AUD_DN1_FREQ_SHIFT       0x32027c
+#define AUD_DN1_AFC              0x320280
+#define AUD_DN1_SRC_SEL          0x320284
+#define AUD_DN1_SHFT             0x320288
+#define AUD_DN2_FREQ             0x32028c
+#define AUD_DN2_FREQ_SHIFT       0x320290
+#define AUD_DN2_AFC              0x320294
+#define AUD_DN2_SRC_SEL          0x320298
+#define AUD_DN2_SHFT             0x32029c
+#define AUD_CRDC0_SRC_SEL        0x320300
+#define AUD_CRDC0_SHIFT          0x320304
+#define AUD_CORDIC_SHIFT_0       0x320308
+#define AUD_CRDC1_SRC_SEL        0x32030c
+#define AUD_CRDC1_SHIFT          0x320310
+#define AUD_CORDIC_SHIFT_1       0x320314
+#define AUD_DCOC_0_SRC           0x320320
+#define AUD_DCOC0_SHIFT          0x320324
+#define AUD_DCOC_0_SHIFT_IN0     0x320328
+#define AUD_DCOC_0_SHIFT_IN1     0x32032c
+#define AUD_DCOC_1_SRC           0x320330
+#define AUD_DCOC1_SHIFT          0x320334
+#define AUD_DCOC_1_SHIFT_IN0     0x320338
+#define AUD_DCOC_1_SHIFT_IN1     0x32033c
+#define AUD_DCOC_2_SRC           0x320340
+#define AUD_DCOC2_SHIFT          0x320344
+#define AUD_DCOC_2_SHIFT_IN0     0x320348
+#define AUD_DCOC_2_SHIFT_IN1     0x32034c
+#define AUD_DCOC_PASS_IN         0x320350
+#define AUD_PDET_SRC             0x320370
+#define AUD_PDET_SHIFT           0x320374
+#define AUD_PILOT_BQD_1_K0       0x320380
+#define AUD_PILOT_BQD_1_K1       0x320384
+#define AUD_PILOT_BQD_1_K2       0x320388
+#define AUD_PILOT_BQD_1_K3       0x32038c
+#define AUD_PILOT_BQD_1_K4       0x320390
+#define AUD_PILOT_BQD_2_K0       0x320394
+#define AUD_PILOT_BQD_2_K1       0x320398
+#define AUD_PILOT_BQD_2_K2       0x32039c
+#define AUD_PILOT_BQD_2_K3       0x3203a0
+#define AUD_PILOT_BQD_2_K4       0x3203a4
+#define AUD_THR_FR               0x3203c0
+#define AUD_X_PROG               0x3203c4
+#define AUD_Y_PROG               0x3203c8
+#define AUD_HARMONIC_MULT        0x3203cc
+#define AUD_C1_UP_THR            0x3203d0
+#define AUD_C1_LO_THR            0x3203d4
+#define AUD_C2_UP_THR            0x3203d8
+#define AUD_C2_LO_THR            0x3203dc
+#define AUD_PLL_EN               0x320400
+#define AUD_PLL_SRC              0x320404
+#define AUD_PLL_SHIFT            0x320408
+#define AUD_PLL_IF_SEL           0x32040c
+#define AUD_PLL_IF_SHIFT         0x320410
+#define AUD_BIQUAD_PLL_K0        0x320414
+#define AUD_BIQUAD_PLL_K1        0x320418
+#define AUD_BIQUAD_PLL_K2        0x32041c
+#define AUD_BIQUAD_PLL_K3        0x320420
+#define AUD_BIQUAD_PLL_K4        0x320424
+#define AUD_DEEMPH0_SRC_SEL      0x320440
+#define AUD_DEEMPH0_SHIFT        0x320444
+#define AUD_DEEMPH0_G0           0x320448
+#define AUD_DEEMPH0_A0           0x32044c
+#define AUD_DEEMPH0_B0           0x320450
+#define AUD_DEEMPH0_A1           0x320454
+#define AUD_DEEMPH0_B1           0x320458
+#define AUD_DEEMPH1_SRC_SEL      0x32045c
+#define AUD_DEEMPH1_SHIFT        0x320460
+#define AUD_DEEMPH1_G0           0x320464
+#define AUD_DEEMPH1_A0           0x320468
+#define AUD_DEEMPH1_B0           0x32046c
+#define AUD_DEEMPH1_A1           0x320470
+#define AUD_DEEMPH1_B1           0x320474
+#define AUD_OUT0_SEL             0x320490
+#define AUD_OUT0_SHIFT           0x320494
+#define AUD_OUT1_SEL             0x320498
+#define AUD_OUT1_SHIFT           0x32049c
+#define AUD_RDSI_SEL             0x3204a0
+#define AUD_RDSI_SHIFT           0x3204a4
+#define AUD_RDSQ_SEL             0x3204a8
+#define AUD_RDSQ_SHIFT           0x3204ac
+#define AUD_DBX_IN_GAIN          0x320500
+#define AUD_DBX_WBE_GAIN         0x320504
+#define AUD_DBX_SE_GAIN          0x320508
+#define AUD_DBX_RMS_WBE          0x32050c
+#define AUD_DBX_RMS_SE           0x320510
+#define AUD_DBX_SE_BYPASS        0x320514
+#define AUD_FAWDETCTL            0x320530
+#define AUD_FAWDETWINCTL         0x320534
+#define AUD_DEEMPHGAIN_R         0x320538
+#define AUD_DEEMPHNUMER1_R       0x32053c
+#define AUD_DEEMPHNUMER2_R       0x320540
+#define AUD_DEEMPHDENOM1_R       0x320544
+#define AUD_DEEMPHDENOM2_R       0x320548
+#define AUD_ERRLOGPERIOD_R       0x32054c
+#define AUD_ERRINTRPTTHSHLD1_R   0x320550
+#define AUD_ERRINTRPTTHSHLD2_R   0x320554
+#define AUD_ERRINTRPTTHSHLD3_R   0x320558
+#define AUD_NICAM_STATUS1        0x32055c
+#define AUD_NICAM_STATUS2        0x320560
+#define AUD_ERRLOG1              0x320564
+#define AUD_ERRLOG2              0x320568
+#define AUD_ERRLOG3              0x32056c
+#define AUD_DAC_BYPASS_L         0x320580
+#define AUD_DAC_BYPASS_R         0x320584
+#define AUD_DAC_BYPASS_CTL       0x320588
+#define AUD_CTL                  0x32058c
+#define AUD_STATUS               0x320590
+#define AUD_VOL_CTL              0x320594
+#define AUD_BAL_CTL              0x320598
+#define AUD_START_TIMER          0x3205b0
+#define AUD_MODE_CHG_TIMER       0x3205b4
+#define AUD_POLYPH80SCALEFAC     0x3205b8
+#define AUD_DMD_RA_DDS           0x3205bc
+#define AUD_I2S_RA_DDS           0x3205c0
+#define AUD_RATE_THRES_DMD       0x3205d0
+#define AUD_RATE_THRES_I2S       0x3205d4
+#define AUD_RATE_ADJ1            0x3205d8
+#define AUD_RATE_ADJ2            0x3205dc
+#define AUD_RATE_ADJ3            0x3205e0
+#define AUD_RATE_ADJ4            0x3205e4
+#define AUD_RATE_ADJ5            0x3205e8
+#define AUD_APB_IN_RATE_ADJ      0x3205ec
+#define AUD_I2SCNTL              0x3205ec
+#define AUD_PHASE_FIX_CTL        0x3205f0
+#define AUD_PLL_PRESCALE         0x320600
+#define AUD_PLL_DDS              0x320604
+#define AUD_PLL_INT              0x320608
+#define AUD_PLL_FRAC             0x32060c
+#define AUD_PLL_JTAG             0x320620
+#define AUD_PLL_SPMP             0x320624
+#define AUD_AFE_12DB_EN          0x320628
+
+// Audio QAM Register Addresses
+#define AUD_PDF_DDS_CNST_BYTE2   0x320d01
+#define AUD_PDF_DDS_CNST_BYTE1   0x320d02
+#define AUD_PDF_DDS_CNST_BYTE0   0x320d03
+#define AUD_PHACC_FREQ_8MSB      0x320d2a
+#define AUD_PHACC_FREQ_8LSB      0x320d2b
+#define AUD_QAM_MODE             0x320d04
+
+/*
+ * transport stream registers
+ */
+
+#define MO_TS_DMA           0x330000 // {64}RWp Transport stream downstream
+#define MO_TS_GPCNT         0x33C020 // {16}RO TS general purpose counter
+#define MO_TS_GPCNTRL       0x33C030 // {2}WO TS general purpose control
+#define MO_TS_DMACNTRL      0x33C040 // {6}RW TS DMA control
+#define MO_TS_XFR_STAT      0x33C044 // {1}RO TS transfer status
+#define MO_TS_LNGTH         0x33C048 // {12}RW TS line length
+
+#define TS_HW_SOP_CNTRL     0x33C04C
+#define TS_GEN_CNTRL        0x33C050
+#define TS_BD_PKT_STAT      0x33C054
+#define TS_SOP_STAT         0x33C058
+#define TS_FIFO_OVFL_STAT   0x33C05C
+#define TS_VALERR_CNTRL     0x33C060
+
+/*
+ * VIP registers
+ */
+
+#define MO_VIPD_DMA         0x340000 // {64}RWp VIP downstream
+#define MO_VIPU_DMA         0x340008 // {64}RWp VIP upstream
+#define MO_VIPD_GPCNT       0x34C020 // {16}RO VIP down general purpose counter
+#define MO_VIPU_GPCNT       0x34C024 // {16}RO VIP up general purpose counter
+#define MO_VIPD_GPCNTRL     0x34C030 // {2}WO VIP down general purpose control
+#define MO_VIPU_GPCNTRL     0x34C034 // {2}WO VIP up general purpose control
+#define MO_VIP_DMACNTRL     0x34C040 // {6}RW VIP DMA control
+#define MO_VIP_XFR_STAT     0x34C044 // {1}RO VIP transfer status
+#define MO_VIP_CFG          0x340048 // VIP configuration
+#define MO_VIPU_CNTRL       0x34004C // VIP upstream control #1
+#define MO_VIPD_CNTRL       0x340050 // VIP downstream control #2
+#define MO_VIPD_LNGTH       0x340054 // VIP downstream line length
+#define MO_VIP_BRSTLN       0x340058 // VIP burst length
+#define MO_VIP_INTCNTRL     0x34C05C // VIP Interrupt Control
+#define MO_VIP_XFTERM       0x340060 // VIP transfer terminate
+
+/*
+ * misc registers
+ */
+
+#define MO_M2M_DMA          0x350000 // {64}RWp Mem2Mem DMA Bfr
+#define MO_GP0_IO           0x350010 // {32}RW* GPIOoutput enablesdata I/O
+#define MO_GP1_IO           0x350014 // {32}RW* GPIOoutput enablesdata I/O
+#define MO_GP2_IO           0x350018 // {32}RW* GPIOoutput enablesdata I/O
+#define MO_GP3_IO           0x35001C // {32}RW* GPIO Mode/Ctrloutput enables
+#define MO_GPIO             0x350020 // {32}RW* GPIO I2C Ctrldata I/O
+#define MO_GPOE             0x350024 // {32}RW  GPIO I2C Ctrloutput enables
+#define MO_GP_ISM           0x350028 // {16}WO  GPIO Intr Sens/Pol
+
+#define MO_PLL_B            0x35C008 // {32}RW* PLL Control for ASB bus clks
+#define MO_M2M_CNT          0x35C024 // {32}RW  Mem2Mem DMA Cnt
+#define MO_M2M_XSUM         0x35C028 // {32}RO  M2M XOR-Checksum
+#define MO_CRC              0x35C02C // {16}RW  CRC16 init/result
+#define MO_CRC_D            0x35C030 // {32}WO  CRC16 new data in
+#define MO_TM_CNT_LDW       0x35C034 // {32}RO  Timer : Counter low dword
+#define MO_TM_CNT_UW        0x35C038 // {16}RO  Timer : Counter high word
+#define MO_TM_LMT_LDW       0x35C03C // {32}RW  Timer : Limit low dword
+#define MO_TM_LMT_UW        0x35C040 // {32}RW  Timer : Limit high word
+#define MO_PINMUX_IO        0x35C044 // {8}RW  Pin Mux Control
+#define MO_TSTSEL_IO        0x35C048 // {2}RW  Pin Mux Control
+#define MO_AFECFG_IO        0x35C04C // AFE configuration reg
+#define MO_DDS_IO           0x35C050 // DDS Increment reg
+#define MO_DDSCFG_IO        0x35C054 // DDS Configuration reg
+#define MO_SAMPLE_IO        0x35C058 // IRIn sample reg
+#define MO_SRST_IO          0x35C05C // Output system reset reg
+
+#define MO_INT1_MSK         0x35C060 // DMA RISC interrupt mask
+#define MO_INT1_STAT        0x35C064 // DMA RISC interrupt status
+#define MO_INT1_MSTAT       0x35C068 // DMA RISC interrupt masked status
+
+/*
+ * i2c bus registers
+ */
+
+#define MO_I2C              0x368000 // I2C data/control
+#define MO_I2C_DIV          (0xf<<4)
+#define MO_I2C_SYNC         (1<<3)
+#define MO_I2C_W3B          (1<<2)
+#define MO_I2C_SCL          (1<<1)
+#define MO_I2C_SDA          (1<<0)
+
+
+/*
+ * general purpose host registers
+ *
+ * FIXME: tyops?  s/0x35/0x38/ ??
+ */
+
+#define MO_GPHSTD_DMA       0x350000 // {64}RWp Host downstream
+#define MO_GPHSTU_DMA       0x350008 // {64}RWp Host upstream
+#define MO_GPHSTU_CNTRL     0x380048 // Host upstream control #1
+#define MO_GPHSTD_CNTRL     0x38004C // Host downstream control #2
+#define MO_GPHSTD_LNGTH     0x380050 // Host downstream line length
+#define MO_GPHST_WSC        0x380054 // Host wait state control
+#define MO_GPHST_XFR        0x380058 // Host transfer control
+#define MO_GPHST_WDTH       0x38005C // Host interface width
+#define MO_GPHST_HDSHK      0x380060 // Host peripheral handshake
+#define MO_GPHST_MUX16      0x380064 // Host muxed 16-bit transfer parameters
+#define MO_GPHST_MODE       0x380068 // Host mode select
+
+#define MO_GPHSTD_GPCNT     0x35C020 // Host down general purpose counter
+#define MO_GPHSTU_GPCNT     0x35C024 // Host up general purpose counter
+#define MO_GPHSTD_GPCNTRL   0x38C030 // Host down general purpose control
+#define MO_GPHSTU_GPCNTRL   0x38C034 // Host up general purpose control
+#define MO_GPHST_DMACNTRL   0x38C040 // Host DMA control
+#define MO_GPHST_XFR_STAT   0x38C044 // Host transfer status
+#define MO_GPHST_SOFT_RST   0x38C06C // Host software reset
+
+/*
+ * RISC instructions
+ */
+
+#define RISC_SYNC		 0x80000000
+#define RISC_SYNC_ODD		 0x80000000
+#define RISC_SYNC_EVEN		 0x80000200
+#define RISC_RESYNC		 0x80008000
+#define RISC_RESYNC_ODD		 0x80008000
+#define RISC_RESYNC_EVEN	 0x80008200
+#define RISC_WRITE		 0x10000000
+#define RISC_WRITEC		 0x50000000
+#define RISC_READ		 0x90000000
+#define RISC_READC		 0xA0000000
+#define RISC_JUMP		 0x70000000
+#define RISC_SKIP		 0x20000000
+#define RISC_WRITERM		 0xB0000000
+#define RISC_WRITECM		 0xC0000000
+#define RISC_WRITECR		 0xD0000000
+#define RISC_IMM		 0x00000001
+
+#define RISC_SOL		 0x08000000
+#define RISC_EOL		 0x04000000
+
+#define RISC_IRQ2		 0x02000000
+#define RISC_IRQ1		 0x01000000
+
+#define RISC_CNT_NONE		 0x00000000
+#define RISC_CNT_INC		 0x00010000
+#define RISC_CNT_RSVR		 0x00020000
+#define RISC_CNT_RESET		 0x00030000
+#define RISC_JMP_SRP		 0x01
+
+/*
+ * various constants
+ */
+
+// DMA
+/* Interrupt mask/status */
+#define PCI_INT_VIDINT		(1 <<  0)
+#define PCI_INT_AUDINT		(1 <<  1)
+#define PCI_INT_TSINT		(1 <<  2)
+#define PCI_INT_VIPINT		(1 <<  3)
+#define PCI_INT_HSTINT		(1 <<  4)
+#define PCI_INT_TM1INT		(1 <<  5)
+#define PCI_INT_SRCDMAINT	(1 <<  6)
+#define PCI_INT_DSTDMAINT	(1 <<  7)
+#define PCI_INT_RISC_RD_BERRINT	(1 << 10)
+#define PCI_INT_RISC_WR_BERRINT	(1 << 11)
+#define PCI_INT_BRDG_BERRINT	(1 << 12)
+#define PCI_INT_SRC_DMA_BERRINT	(1 << 13)
+#define PCI_INT_DST_DMA_BERRINT	(1 << 14)
+#define PCI_INT_IPB_DMA_BERRINT	(1 << 15)
+#define PCI_INT_I2CDONE		(1 << 16)
+#define PCI_INT_I2CRACK		(1 << 17)
+#define PCI_INT_IR_SMPINT	(1 << 18)
+#define PCI_INT_GPIO_INT0	(1 << 19)
+#define PCI_INT_GPIO_INT1	(1 << 20)
+
+#define SEL_BTSC     0x01
+#define SEL_EIAJ     0x02
+#define SEL_A2       0x04
+#define SEL_SAP      0x08
+#define SEL_NICAM    0x10
+#define SEL_FMRADIO  0x20
+
+// AUD_CTL
+#define AUD_INT_DN_RISCI1	(1 <<  0)
+#define AUD_INT_UP_RISCI1	(1 <<  1)
+#define AUD_INT_RDS_DN_RISCI1	(1 <<  2)
+#define AUD_INT_DN_RISCI2	(1 <<  4) /* yes, 3 is skipped */
+#define AUD_INT_UP_RISCI2	(1 <<  5)
+#define AUD_INT_RDS_DN_RISCI2	(1 <<  6)
+#define AUD_INT_DN_SYNC		(1 << 12)
+#define AUD_INT_UP_SYNC		(1 << 13)
+#define AUD_INT_RDS_DN_SYNC	(1 << 14)
+#define AUD_INT_OPC_ERR		(1 << 16)
+#define AUD_INT_BER_IRQ		(1 << 20)
+#define AUD_INT_MCHG_IRQ	(1 << 21)
+
+#define EN_BTSC_FORCE_MONO      0
+#define EN_BTSC_FORCE_STEREO    1
+#define EN_BTSC_FORCE_SAP       2
+#define EN_BTSC_AUTO_STEREO     3
+#define EN_BTSC_AUTO_SAP        4
+
+#define EN_A2_FORCE_MONO1       8
+#define EN_A2_FORCE_MONO2       9
+#define EN_A2_FORCE_STEREO      10
+#define EN_A2_AUTO_MONO2        11
+#define EN_A2_AUTO_STEREO       12
+
+#define EN_EIAJ_FORCE_MONO1     16
+#define EN_EIAJ_FORCE_MONO2     17
+#define EN_EIAJ_FORCE_STEREO    18
+#define EN_EIAJ_AUTO_MONO2      19
+#define EN_EIAJ_AUTO_STEREO     20
+
+#define EN_NICAM_FORCE_MONO1    32
+#define EN_NICAM_FORCE_MONO2    33
+#define EN_NICAM_FORCE_STEREO   34
+#define EN_NICAM_AUTO_MONO2     35
+#define EN_NICAM_AUTO_STEREO    36
+
+#define EN_FMRADIO_FORCE_MONO   24
+#define EN_FMRADIO_FORCE_STEREO 25
+#define EN_FMRADIO_AUTO_STEREO  26
+
+#define EN_NICAM_AUTO_FALLBACK  0x00000040
+#define EN_FMRADIO_EN_RDS       0x00000200
+#define EN_NICAM_TRY_AGAIN_BIT  0x00000400
+#define EN_DAC_ENABLE           0x00001000
+#define EN_I2SOUT_ENABLE        0x00002000
+#define EN_I2SIN_STR2DAC        0x00004000
+#define EN_I2SIN_ENABLE         0x00008000
+
+#define EN_DMTRX_SUMDIFF        (0 << 7)
+#define EN_DMTRX_SUMR           (1 << 7)
+#define EN_DMTRX_LR             (2 << 7)
+#define EN_DMTRX_MONO           (3 << 7)
+#define EN_DMTRX_BYPASS         (1 << 11)
+
+// Video
+#define VID_CAPTURE_CONTROL		0x310180
+
+#define CX23880_CAP_CTL_CAPTURE_VBI_ODD  (1<<3)
+#define CX23880_CAP_CTL_CAPTURE_VBI_EVEN (1<<2)
+#define CX23880_CAP_CTL_CAPTURE_ODD      (1<<1)
+#define CX23880_CAP_CTL_CAPTURE_EVEN     (1<<0)
+
+#define VideoInputMux0		 0x0
+#define VideoInputMux1		 0x1
+#define VideoInputMux2		 0x2
+#define VideoInputMux3		 0x3
+#define VideoInputTuner		 0x0
+#define VideoInputComposite	 0x1
+#define VideoInputSVideo	 0x2
+#define VideoInputOther		 0x3
+
+#define Xtal0		 0x1
+#define Xtal1		 0x2
+#define XtalAuto	 0x3
+
+#define VideoFormatAuto		 0x0
+#define VideoFormatNTSC		 0x1
+#define VideoFormatNTSCJapan	 0x2
+#define VideoFormatNTSC443	 0x3
+#define VideoFormatPAL		 0x4
+#define VideoFormatPALB		 0x4
+#define VideoFormatPALD		 0x4
+#define VideoFormatPALG		 0x4
+#define VideoFormatPALH		 0x4
+#define VideoFormatPALI		 0x4
+#define VideoFormatPALBDGHI	 0x4
+#define VideoFormatPALM		 0x5
+#define VideoFormatPALN		 0x6
+#define VideoFormatPALNC	 0x7
+#define VideoFormatPAL60	 0x8
+#define VideoFormatSECAM	 0x9
+
+#define VideoFormatAuto27MHz		 0x10
+#define VideoFormatNTSC27MHz		 0x11
+#define VideoFormatNTSCJapan27MHz	 0x12
+#define VideoFormatNTSC44327MHz		 0x13
+#define VideoFormatPAL27MHz		 0x14
+#define VideoFormatPALB27MHz		 0x14
+#define VideoFormatPALD27MHz		 0x14
+#define VideoFormatPALG27MHz		 0x14
+#define VideoFormatPALH27MHz		 0x14
+#define VideoFormatPALI27MHz		 0x14
+#define VideoFormatPALBDGHI27MHz	 0x14
+#define VideoFormatPALM27MHz		 0x15
+#define VideoFormatPALN27MHz		 0x16
+#define VideoFormatPALNC27MHz		 0x17
+#define VideoFormatPAL6027MHz		 0x18
+#define VideoFormatSECAM27MHz		 0x19
+
+#define NominalUSECAM	 0x87
+#define NominalVSECAM	 0x85
+#define NominalUNTSC	 0xFE
+#define NominalVNTSC	 0xB4
+
+#define NominalContrast  0xD8
+
+#define HFilterAutoFormat	 0x0
+#define HFilterCIF		 0x1
+#define HFilterQCIF		 0x2
+#define HFilterICON		 0x3
+
+#define VFilter2TapInterpolate  0
+#define VFilter3TapInterpolate  1
+#define VFilter4TapInterpolate  2
+#define VFilter5TapInterpolate  3
+#define VFilter2TapNoInterpolate  4
+#define VFilter3TapNoInterpolate  5
+#define VFilter4TapNoInterpolate  6
+#define VFilter5TapNoInterpolate  7
+
+#define ColorFormatRGB32	 0x0000
+#define ColorFormatRGB24	 0x0011
+#define ColorFormatRGB16	 0x0022
+#define ColorFormatRGB15	 0x0033
+#define ColorFormatYUY2		 0x0044
+#define ColorFormatBTYUV	 0x0055
+#define ColorFormatY8		 0x0066
+#define ColorFormatRGB8		 0x0077
+#define ColorFormatPL422	 0x0088
+#define ColorFormatPL411	 0x0099
+#define ColorFormatYUV12	 0x00AA
+#define ColorFormatYUV9		 0x00BB
+#define ColorFormatRAW		 0x00EE
+#define ColorFormatBSWAP         0x0300
+#define ColorFormatWSWAP         0x0c00
+#define ColorFormatEvenMask      0x050f
+#define ColorFormatOddMask       0x0af0
+#define ColorFormatGamma         0x1000
+
+#define Interlaced		 0x1
+#define NonInterlaced		 0x0
+
+#define FieldEven		 0x1
+#define FieldOdd		 0x0
+
+#define TGReadWriteMode		 0x0
+#define TGEnableMode		 0x1
+
+#define DV_CbAlign		 0x0
+#define DV_Y0Align		 0x1
+#define DV_CrAlign		 0x2
+#define DV_Y1Align		 0x3
+
+#define DVF_Analog		 0x0
+#define DVF_CCIR656		 0x1
+#define DVF_ByteStream		 0x2
+#define DVF_ExtVSYNC		 0x4
+#define DVF_ExtField		 0x5
+
+#define CHANNEL_VID_Y		 0x1
+#define CHANNEL_VID_U		 0x2
+#define CHANNEL_VID_V		 0x3
+#define CHANNEL_VID_VBI		 0x4
+#define CHANNEL_AUD_DN		 0x5
+#define CHANNEL_AUD_UP		 0x6
+#define CHANNEL_AUD_RDS_DN	 0x7
+#define CHANNEL_MPEG_DN		 0x8
+#define CHANNEL_VIP_DN		 0x9
+#define CHANNEL_VIP_UP		 0xA
+#define CHANNEL_HOST_DN		 0xB
+#define CHANNEL_HOST_UP		 0xC
+#define CHANNEL_FIRST		 0x1
+#define CHANNEL_LAST		 0xC
+
+#define GP_COUNT_CONTROL_NONE		 0x0
+#define GP_COUNT_CONTROL_INC		 0x1
+#define GP_COUNT_CONTROL_RESERVED	 0x2
+#define GP_COUNT_CONTROL_RESET		 0x3
+
+#define PLL_PRESCALE_BY_2  2
+#define PLL_PRESCALE_BY_3  3
+#define PLL_PRESCALE_BY_4  4
+#define PLL_PRESCALE_BY_5  5
+
+#define HLNotchFilter4xFsc	 0
+#define HLNotchFilterSquare	 1
+#define HLNotchFilter135NTSC	 2
+#define HLNotchFilter135PAL	 3
+
+#define NTSC_8x_SUB_CARRIER  28.63636E6
+#define PAL_8x_SUB_CARRIER  35.46895E6
+
+// Default analog settings
+#define DEFAULT_HUE_NTSC			0x00
+#define DEFAULT_BRIGHTNESS_NTSC			0x00
+#define DEFAULT_CONTRAST_NTSC			0x39
+#define DEFAULT_SAT_U_NTSC			0x7F
+#define DEFAULT_SAT_V_NTSC			0x5A
+
+#endif /* _CX88_REG_H_ */
diff --git a/drivers/media/pci/cx88/cx88-tvaudio.c b/drivers/media/pci/cx88/cx88-tvaudio.c
new file mode 100644
index 000000000..9d25d77fb
--- /dev/null
+++ b/drivers/media/pci/cx88/cx88-tvaudio.c
@@ -0,0 +1,1046 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * cx88x-audio.c - Conexant CX23880/23881 audio downstream driver driver
+ *
+ *  (c) 2001 Michael Eskin, Tom Zakrajsek [Windows version]
+ *  (c) 2002 Yurij Sysoev <yurij@naturesoft.net>
+ *  (c) 2003 Gerd Knorr <kraxel@bytesex.org>
+ *
+ * -----------------------------------------------------------------------
+ *
+ * Lot of voodoo here.  Even the data sheet doesn't help to
+ * understand what is going on here, the documentation for the audio
+ * part of the cx2388x chip is *very* bad.
+ *
+ * Some of this comes from party done linux driver sources I got from
+ * [undocumented].
+ *
+ * Some comes from the dscaler sources, one of the dscaler driver guy works
+ * for Conexant ...
+ *
+ * -----------------------------------------------------------------------
+ */
+
+#include "cx88.h"
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/freezer.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/poll.h>
+#include <linux/signal.h>
+#include <linux/ioport.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kthread.h>
+
+static unsigned int audio_debug;
+module_param(audio_debug, int, 0644);
+MODULE_PARM_DESC(audio_debug, "enable debug messages [audio]");
+
+static unsigned int always_analog;
+module_param(always_analog, int, 0644);
+MODULE_PARM_DESC(always_analog, "force analog audio out");
+
+static unsigned int radio_deemphasis;
+module_param(radio_deemphasis, int, 0644);
+MODULE_PARM_DESC(radio_deemphasis,
+		 "Radio deemphasis time constant, 0=None, 1=50us (elsewhere), 2=75us (USA)");
+
+#define dprintk(fmt, arg...) do {				\
+	if (audio_debug)						\
+		printk(KERN_DEBUG pr_fmt("%s: tvaudio:" fmt),		\
+			__func__, ##arg);				\
+} while (0)
+/* ----------------------------------------------------------- */
+
+static const char * const aud_ctl_names[64] = {
+	[EN_BTSC_FORCE_MONO] = "BTSC_FORCE_MONO",
+	[EN_BTSC_FORCE_STEREO] = "BTSC_FORCE_STEREO",
+	[EN_BTSC_FORCE_SAP] = "BTSC_FORCE_SAP",
+	[EN_BTSC_AUTO_STEREO] = "BTSC_AUTO_STEREO",
+	[EN_BTSC_AUTO_SAP] = "BTSC_AUTO_SAP",
+	[EN_A2_FORCE_MONO1] = "A2_FORCE_MONO1",
+	[EN_A2_FORCE_MONO2] = "A2_FORCE_MONO2",
+	[EN_A2_FORCE_STEREO] = "A2_FORCE_STEREO",
+	[EN_A2_AUTO_MONO2] = "A2_AUTO_MONO2",
+	[EN_A2_AUTO_STEREO] = "A2_AUTO_STEREO",
+	[EN_EIAJ_FORCE_MONO1] = "EIAJ_FORCE_MONO1",
+	[EN_EIAJ_FORCE_MONO2] = "EIAJ_FORCE_MONO2",
+	[EN_EIAJ_FORCE_STEREO] = "EIAJ_FORCE_STEREO",
+	[EN_EIAJ_AUTO_MONO2] = "EIAJ_AUTO_MONO2",
+	[EN_EIAJ_AUTO_STEREO] = "EIAJ_AUTO_STEREO",
+	[EN_NICAM_FORCE_MONO1] = "NICAM_FORCE_MONO1",
+	[EN_NICAM_FORCE_MONO2] = "NICAM_FORCE_MONO2",
+	[EN_NICAM_FORCE_STEREO] = "NICAM_FORCE_STEREO",
+	[EN_NICAM_AUTO_MONO2] = "NICAM_AUTO_MONO2",
+	[EN_NICAM_AUTO_STEREO] = "NICAM_AUTO_STEREO",
+	[EN_FMRADIO_FORCE_MONO] = "FMRADIO_FORCE_MONO",
+	[EN_FMRADIO_FORCE_STEREO] = "FMRADIO_FORCE_STEREO",
+	[EN_FMRADIO_AUTO_STEREO] = "FMRADIO_AUTO_STEREO",
+};
+
+struct rlist {
+	u32 reg;
+	u32 val;
+};
+
+static void set_audio_registers(struct cx88_core *core, const struct rlist *l)
+{
+	int i;
+
+	for (i = 0; l[i].reg; i++) {
+		switch (l[i].reg) {
+		case AUD_PDF_DDS_CNST_BYTE2:
+		case AUD_PDF_DDS_CNST_BYTE1:
+		case AUD_PDF_DDS_CNST_BYTE0:
+		case AUD_QAM_MODE:
+		case AUD_PHACC_FREQ_8MSB:
+		case AUD_PHACC_FREQ_8LSB:
+			cx_writeb(l[i].reg, l[i].val);
+			break;
+		default:
+			cx_write(l[i].reg, l[i].val);
+			break;
+		}
+	}
+}
+
+static void set_audio_start(struct cx88_core *core, u32 mode)
+{
+	/* mute */
+	cx_write(AUD_VOL_CTL, (1 << 6));
+
+	/* start programming */
+	cx_write(AUD_INIT, mode);
+	cx_write(AUD_INIT_LD, 0x0001);
+	cx_write(AUD_SOFT_RESET, 0x0001);
+}
+
+static void set_audio_finish(struct cx88_core *core, u32 ctl)
+{
+	u32 volume;
+
+	/* restart dma; This avoids buzz in NICAM and is good in others  */
+	cx88_stop_audio_dma(core);
+	cx_write(AUD_RATE_THRES_DMD, 0x000000C0);
+	cx88_start_audio_dma(core);
+
+	if (core->board.mpeg & CX88_MPEG_BLACKBIRD) {
+		cx_write(AUD_I2SINPUTCNTL, 4);
+		cx_write(AUD_BAUDRATE, 1);
+		/*
+		 * 'pass-thru mode': this enables the i2s
+		 * output to the mpeg encoder
+		 */
+		cx_set(AUD_CTL, EN_I2SOUT_ENABLE);
+		cx_write(AUD_I2SOUTPUTCNTL, 1);
+		cx_write(AUD_I2SCNTL, 0);
+		/* cx_write(AUD_APB_IN_RATE_ADJ, 0); */
+	}
+	if ((always_analog) || (!(core->board.mpeg & CX88_MPEG_BLACKBIRD))) {
+		ctl |= EN_DAC_ENABLE;
+		cx_write(AUD_CTL, ctl);
+	}
+
+	/* finish programming */
+	cx_write(AUD_SOFT_RESET, 0x0000);
+
+	/* unmute */
+	volume = cx_sread(SHADOW_AUD_VOL_CTL);
+	cx_swrite(SHADOW_AUD_VOL_CTL, AUD_VOL_CTL, volume);
+
+	core->last_change = jiffies;
+}
+
+/* ----------------------------------------------------------- */
+
+static void set_audio_standard_BTSC(struct cx88_core *core, unsigned int sap,
+				    u32 mode)
+{
+	static const struct rlist btsc[] = {
+		{AUD_AFE_12DB_EN, 0x00000001},
+		{AUD_OUT1_SEL, 0x00000013},
+		{AUD_OUT1_SHIFT, 0x00000000},
+		{AUD_POLY0_DDS_CONSTANT, 0x0012010c},
+		{AUD_DMD_RA_DDS, 0x00c3e7aa},
+		{AUD_DBX_IN_GAIN, 0x00004734},
+		{AUD_DBX_WBE_GAIN, 0x00004640},
+		{AUD_DBX_SE_GAIN, 0x00008d31},
+		{AUD_DCOC_0_SRC, 0x0000001a},
+		{AUD_IIR1_4_SEL, 0x00000021},
+		{AUD_DCOC_PASS_IN, 0x00000003},
+		{AUD_DCOC_0_SHIFT_IN0, 0x0000000a},
+		{AUD_DCOC_0_SHIFT_IN1, 0x00000008},
+		{AUD_DCOC_1_SHIFT_IN0, 0x0000000a},
+		{AUD_DCOC_1_SHIFT_IN1, 0x00000008},
+		{AUD_DN0_FREQ, 0x0000283b},
+		{AUD_DN2_SRC_SEL, 0x00000008},
+		{AUD_DN2_FREQ, 0x00003000},
+		{AUD_DN2_AFC, 0x00000002},
+		{AUD_DN2_SHFT, 0x00000000},
+		{AUD_IIR2_2_SEL, 0x00000020},
+		{AUD_IIR2_2_SHIFT, 0x00000000},
+		{AUD_IIR2_3_SEL, 0x0000001f},
+		{AUD_IIR2_3_SHIFT, 0x00000000},
+		{AUD_CRDC1_SRC_SEL, 0x000003ce},
+		{AUD_CRDC1_SHIFT, 0x00000000},
+		{AUD_CORDIC_SHIFT_1, 0x00000007},
+		{AUD_DCOC_1_SRC, 0x0000001b},
+		{AUD_DCOC1_SHIFT, 0x00000000},
+		{AUD_RDSI_SEL, 0x00000008},
+		{AUD_RDSQ_SEL, 0x00000008},
+		{AUD_RDSI_SHIFT, 0x00000000},
+		{AUD_RDSQ_SHIFT, 0x00000000},
+		{AUD_POLYPH80SCALEFAC, 0x00000003},
+		{ /* end of list */ },
+	};
+	static const struct rlist btsc_sap[] = {
+		{AUD_AFE_12DB_EN, 0x00000001},
+		{AUD_DBX_IN_GAIN, 0x00007200},
+		{AUD_DBX_WBE_GAIN, 0x00006200},
+		{AUD_DBX_SE_GAIN, 0x00006200},
+		{AUD_IIR1_1_SEL, 0x00000000},
+		{AUD_IIR1_3_SEL, 0x00000001},
+		{AUD_DN1_SRC_SEL, 0x00000007},
+		{AUD_IIR1_4_SHIFT, 0x00000006},
+		{AUD_IIR2_1_SHIFT, 0x00000000},
+		{AUD_IIR2_2_SHIFT, 0x00000000},
+		{AUD_IIR3_0_SHIFT, 0x00000000},
+		{AUD_IIR3_1_SHIFT, 0x00000000},
+		{AUD_IIR3_0_SEL, 0x0000000d},
+		{AUD_IIR3_1_SEL, 0x0000000e},
+		{AUD_DEEMPH1_SRC_SEL, 0x00000014},
+		{AUD_DEEMPH1_SHIFT, 0x00000000},
+		{AUD_DEEMPH1_G0, 0x00004000},
+		{AUD_DEEMPH1_A0, 0x00000000},
+		{AUD_DEEMPH1_B0, 0x00000000},
+		{AUD_DEEMPH1_A1, 0x00000000},
+		{AUD_DEEMPH1_B1, 0x00000000},
+		{AUD_OUT0_SEL, 0x0000003f},
+		{AUD_OUT1_SEL, 0x0000003f},
+		{AUD_DN1_AFC, 0x00000002},
+		{AUD_DCOC_0_SHIFT_IN0, 0x0000000a},
+		{AUD_DCOC_0_SHIFT_IN1, 0x00000008},
+		{AUD_DCOC_1_SHIFT_IN0, 0x0000000a},
+		{AUD_DCOC_1_SHIFT_IN1, 0x00000008},
+		{AUD_IIR1_0_SEL, 0x0000001d},
+		{AUD_IIR1_2_SEL, 0x0000001e},
+		{AUD_IIR2_1_SEL, 0x00000002},
+		{AUD_IIR2_2_SEL, 0x00000004},
+		{AUD_IIR3_2_SEL, 0x0000000f},
+		{AUD_DCOC2_SHIFT, 0x00000001},
+		{AUD_IIR3_2_SHIFT, 0x00000001},
+		{AUD_DEEMPH0_SRC_SEL, 0x00000014},
+		{AUD_CORDIC_SHIFT_1, 0x00000006},
+		{AUD_POLY0_DDS_CONSTANT, 0x000e4db2},
+		{AUD_DMD_RA_DDS, 0x00f696e6},
+		{AUD_IIR2_3_SEL, 0x00000025},
+		{AUD_IIR1_4_SEL, 0x00000021},
+		{AUD_DN1_FREQ, 0x0000c965},
+		{AUD_DCOC_PASS_IN, 0x00000003},
+		{AUD_DCOC_0_SRC, 0x0000001a},
+		{AUD_DCOC_1_SRC, 0x0000001b},
+		{AUD_DCOC1_SHIFT, 0x00000000},
+		{AUD_RDSI_SEL, 0x00000009},
+		{AUD_RDSQ_SEL, 0x00000009},
+		{AUD_RDSI_SHIFT, 0x00000000},
+		{AUD_RDSQ_SHIFT, 0x00000000},
+		{AUD_POLYPH80SCALEFAC, 0x00000003},
+		{ /* end of list */ },
+	};
+
+	mode |= EN_FMRADIO_EN_RDS;
+
+	if (sap) {
+		dprintk("%s SAP (status: unknown)\n", __func__);
+		set_audio_start(core, SEL_SAP);
+		set_audio_registers(core, btsc_sap);
+		set_audio_finish(core, mode);
+	} else {
+		dprintk("%s (status: known-good)\n", __func__);
+		set_audio_start(core, SEL_BTSC);
+		set_audio_registers(core, btsc);
+		set_audio_finish(core, mode);
+	}
+}
+
+static void set_audio_standard_NICAM(struct cx88_core *core, u32 mode)
+{
+	static const struct rlist nicam_l[] = {
+		{AUD_AFE_12DB_EN, 0x00000001},
+		{AUD_RATE_ADJ1, 0x00000060},
+		{AUD_RATE_ADJ2, 0x000000F9},
+		{AUD_RATE_ADJ3, 0x000001CC},
+		{AUD_RATE_ADJ4, 0x000002B3},
+		{AUD_RATE_ADJ5, 0x00000726},
+		{AUD_DEEMPHDENOM1_R, 0x0000F3D0},
+		{AUD_DEEMPHDENOM2_R, 0x00000000},
+		{AUD_ERRLOGPERIOD_R, 0x00000064},
+		{AUD_ERRINTRPTTHSHLD1_R, 0x00000FFF},
+		{AUD_ERRINTRPTTHSHLD2_R, 0x0000001F},
+		{AUD_ERRINTRPTTHSHLD3_R, 0x0000000F},
+		{AUD_POLYPH80SCALEFAC, 0x00000003},
+		{AUD_DMD_RA_DDS, 0x00C00000},
+		{AUD_PLL_INT, 0x0000001E},
+		{AUD_PLL_DDS, 0x00000000},
+		{AUD_PLL_FRAC, 0x0000E542},
+		{AUD_START_TIMER, 0x00000000},
+		{AUD_DEEMPHNUMER1_R, 0x000353DE},
+		{AUD_DEEMPHNUMER2_R, 0x000001B1},
+		{AUD_PDF_DDS_CNST_BYTE2, 0x06},
+		{AUD_PDF_DDS_CNST_BYTE1, 0x82},
+		{AUD_PDF_DDS_CNST_BYTE0, 0x12},
+		{AUD_QAM_MODE, 0x05},
+		{AUD_PHACC_FREQ_8MSB, 0x34},
+		{AUD_PHACC_FREQ_8LSB, 0x4C},
+		{AUD_DEEMPHGAIN_R, 0x00006680},
+		{AUD_RATE_THRES_DMD, 0x000000C0},
+		{ /* end of list */ },
+	};
+
+	static const struct rlist nicam_bgdki_common[] = {
+		{AUD_AFE_12DB_EN, 0x00000001},
+		{AUD_RATE_ADJ1, 0x00000010},
+		{AUD_RATE_ADJ2, 0x00000040},
+		{AUD_RATE_ADJ3, 0x00000100},
+		{AUD_RATE_ADJ4, 0x00000400},
+		{AUD_RATE_ADJ5, 0x00001000},
+		{AUD_ERRLOGPERIOD_R, 0x00000fff},
+		{AUD_ERRINTRPTTHSHLD1_R, 0x000003ff},
+		{AUD_ERRINTRPTTHSHLD2_R, 0x000000ff},
+		{AUD_ERRINTRPTTHSHLD3_R, 0x0000003f},
+		{AUD_POLYPH80SCALEFAC, 0x00000003},
+		{AUD_DEEMPHGAIN_R, 0x000023c2},
+		{AUD_DEEMPHNUMER1_R, 0x0002a7bc},
+		{AUD_DEEMPHNUMER2_R, 0x0003023e},
+		{AUD_DEEMPHDENOM1_R, 0x0000f3d0},
+		{AUD_DEEMPHDENOM2_R, 0x00000000},
+		{AUD_PDF_DDS_CNST_BYTE2, 0x06},
+		{AUD_PDF_DDS_CNST_BYTE1, 0x82},
+		{AUD_QAM_MODE, 0x05},
+		{ /* end of list */ },
+	};
+
+	static const struct rlist nicam_i[] = {
+		{AUD_PDF_DDS_CNST_BYTE0, 0x12},
+		{AUD_PHACC_FREQ_8MSB, 0x3a},
+		{AUD_PHACC_FREQ_8LSB, 0x93},
+		{ /* end of list */ },
+	};
+
+	static const struct rlist nicam_default[] = {
+		{AUD_PDF_DDS_CNST_BYTE0, 0x16},
+		{AUD_PHACC_FREQ_8MSB, 0x34},
+		{AUD_PHACC_FREQ_8LSB, 0x4c},
+		{ /* end of list */ },
+	};
+
+	set_audio_start(core, SEL_NICAM);
+	switch (core->tvaudio) {
+	case WW_L:
+		dprintk("%s SECAM-L NICAM (status: devel)\n", __func__);
+		set_audio_registers(core, nicam_l);
+		break;
+	case WW_I:
+		dprintk("%s PAL-I NICAM (status: known-good)\n", __func__);
+		set_audio_registers(core, nicam_bgdki_common);
+		set_audio_registers(core, nicam_i);
+		break;
+	case WW_NONE:
+	case WW_BTSC:
+	case WW_BG:
+	case WW_DK:
+	case WW_EIAJ:
+	case WW_I2SPT:
+	case WW_FM:
+	case WW_I2SADC:
+	case WW_M:
+		dprintk("%s PAL-BGDK NICAM (status: known-good)\n", __func__);
+		set_audio_registers(core, nicam_bgdki_common);
+		set_audio_registers(core, nicam_default);
+		break;
+	}
+
+	mode |= EN_DMTRX_LR | EN_DMTRX_BYPASS;
+	set_audio_finish(core, mode);
+}
+
+static void set_audio_standard_A2(struct cx88_core *core, u32 mode)
+{
+	static const struct rlist a2_bgdk_common[] = {
+		{AUD_ERRLOGPERIOD_R, 0x00000064},
+		{AUD_ERRINTRPTTHSHLD1_R, 0x00000fff},
+		{AUD_ERRINTRPTTHSHLD2_R, 0x0000001f},
+		{AUD_ERRINTRPTTHSHLD3_R, 0x0000000f},
+		{AUD_PDF_DDS_CNST_BYTE2, 0x06},
+		{AUD_PDF_DDS_CNST_BYTE1, 0x82},
+		{AUD_PDF_DDS_CNST_BYTE0, 0x12},
+		{AUD_QAM_MODE, 0x05},
+		{AUD_PHACC_FREQ_8MSB, 0x34},
+		{AUD_PHACC_FREQ_8LSB, 0x4c},
+		{AUD_RATE_ADJ1, 0x00000100},
+		{AUD_RATE_ADJ2, 0x00000200},
+		{AUD_RATE_ADJ3, 0x00000300},
+		{AUD_RATE_ADJ4, 0x00000400},
+		{AUD_RATE_ADJ5, 0x00000500},
+		{AUD_THR_FR, 0x00000000},
+		{AAGC_HYST, 0x0000001a},
+		{AUD_PILOT_BQD_1_K0, 0x0000755b},
+		{AUD_PILOT_BQD_1_K1, 0x00551340},
+		{AUD_PILOT_BQD_1_K2, 0x006d30be},
+		{AUD_PILOT_BQD_1_K3, 0xffd394af},
+		{AUD_PILOT_BQD_1_K4, 0x00400000},
+		{AUD_PILOT_BQD_2_K0, 0x00040000},
+		{AUD_PILOT_BQD_2_K1, 0x002a4841},
+		{AUD_PILOT_BQD_2_K2, 0x00400000},
+		{AUD_PILOT_BQD_2_K3, 0x00000000},
+		{AUD_PILOT_BQD_2_K4, 0x00000000},
+		{AUD_MODE_CHG_TIMER, 0x00000040},
+		{AUD_AFE_12DB_EN, 0x00000001},
+		{AUD_CORDIC_SHIFT_0, 0x00000007},
+		{AUD_CORDIC_SHIFT_1, 0x00000007},
+		{AUD_DEEMPH0_G0, 0x00000380},
+		{AUD_DEEMPH1_G0, 0x00000380},
+		{AUD_DCOC_0_SRC, 0x0000001a},
+		{AUD_DCOC0_SHIFT, 0x00000000},
+		{AUD_DCOC_0_SHIFT_IN0, 0x0000000a},
+		{AUD_DCOC_0_SHIFT_IN1, 0x00000008},
+		{AUD_DCOC_PASS_IN, 0x00000003},
+		{AUD_IIR3_0_SEL, 0x00000021},
+		{AUD_DN2_AFC, 0x00000002},
+		{AUD_DCOC_1_SRC, 0x0000001b},
+		{AUD_DCOC1_SHIFT, 0x00000000},
+		{AUD_DCOC_1_SHIFT_IN0, 0x0000000a},
+		{AUD_DCOC_1_SHIFT_IN1, 0x00000008},
+		{AUD_IIR3_1_SEL, 0x00000023},
+		{AUD_RDSI_SEL, 0x00000017},
+		{AUD_RDSI_SHIFT, 0x00000000},
+		{AUD_RDSQ_SEL, 0x00000017},
+		{AUD_RDSQ_SHIFT, 0x00000000},
+		{AUD_PLL_INT, 0x0000001e},
+		{AUD_PLL_DDS, 0x00000000},
+		{AUD_PLL_FRAC, 0x0000e542},
+		{AUD_POLYPH80SCALEFAC, 0x00000001},
+		{AUD_START_TIMER, 0x00000000},
+		{ /* end of list */ },
+	};
+
+	static const struct rlist a2_bg[] = {
+		{AUD_DMD_RA_DDS, 0x002a4f2f},
+		{AUD_C1_UP_THR, 0x00007000},
+		{AUD_C1_LO_THR, 0x00005400},
+		{AUD_C2_UP_THR, 0x00005400},
+		{AUD_C2_LO_THR, 0x00003000},
+		{ /* end of list */ },
+	};
+
+	static const struct rlist a2_dk[] = {
+		{AUD_DMD_RA_DDS, 0x002a4f2f},
+		{AUD_C1_UP_THR, 0x00007000},
+		{AUD_C1_LO_THR, 0x00005400},
+		{AUD_C2_UP_THR, 0x00005400},
+		{AUD_C2_LO_THR, 0x00003000},
+		{AUD_DN0_FREQ, 0x00003a1c},
+		{AUD_DN2_FREQ, 0x0000d2e0},
+		{ /* end of list */ },
+	};
+
+	static const struct rlist a1_i[] = {
+		{AUD_ERRLOGPERIOD_R, 0x00000064},
+		{AUD_ERRINTRPTTHSHLD1_R, 0x00000fff},
+		{AUD_ERRINTRPTTHSHLD2_R, 0x0000001f},
+		{AUD_ERRINTRPTTHSHLD3_R, 0x0000000f},
+		{AUD_PDF_DDS_CNST_BYTE2, 0x06},
+		{AUD_PDF_DDS_CNST_BYTE1, 0x82},
+		{AUD_PDF_DDS_CNST_BYTE0, 0x12},
+		{AUD_QAM_MODE, 0x05},
+		{AUD_PHACC_FREQ_8MSB, 0x3a},
+		{AUD_PHACC_FREQ_8LSB, 0x93},
+		{AUD_DMD_RA_DDS, 0x002a4f2f},
+		{AUD_PLL_INT, 0x0000001e},
+		{AUD_PLL_DDS, 0x00000004},
+		{AUD_PLL_FRAC, 0x0000e542},
+		{AUD_RATE_ADJ1, 0x00000100},
+		{AUD_RATE_ADJ2, 0x00000200},
+		{AUD_RATE_ADJ3, 0x00000300},
+		{AUD_RATE_ADJ4, 0x00000400},
+		{AUD_RATE_ADJ5, 0x00000500},
+		{AUD_THR_FR, 0x00000000},
+		{AUD_PILOT_BQD_1_K0, 0x0000755b},
+		{AUD_PILOT_BQD_1_K1, 0x00551340},
+		{AUD_PILOT_BQD_1_K2, 0x006d30be},
+		{AUD_PILOT_BQD_1_K3, 0xffd394af},
+		{AUD_PILOT_BQD_1_K4, 0x00400000},
+		{AUD_PILOT_BQD_2_K0, 0x00040000},
+		{AUD_PILOT_BQD_2_K1, 0x002a4841},
+		{AUD_PILOT_BQD_2_K2, 0x00400000},
+		{AUD_PILOT_BQD_2_K3, 0x00000000},
+		{AUD_PILOT_BQD_2_K4, 0x00000000},
+		{AUD_MODE_CHG_TIMER, 0x00000060},
+		{AUD_AFE_12DB_EN, 0x00000001},
+		{AAGC_HYST, 0x0000000a},
+		{AUD_CORDIC_SHIFT_0, 0x00000007},
+		{AUD_CORDIC_SHIFT_1, 0x00000007},
+		{AUD_C1_UP_THR, 0x00007000},
+		{AUD_C1_LO_THR, 0x00005400},
+		{AUD_C2_UP_THR, 0x00005400},
+		{AUD_C2_LO_THR, 0x00003000},
+		{AUD_DCOC_0_SRC, 0x0000001a},
+		{AUD_DCOC0_SHIFT, 0x00000000},
+		{AUD_DCOC_0_SHIFT_IN0, 0x0000000a},
+		{AUD_DCOC_0_SHIFT_IN1, 0x00000008},
+		{AUD_DCOC_PASS_IN, 0x00000003},
+		{AUD_IIR3_0_SEL, 0x00000021},
+		{AUD_DN2_AFC, 0x00000002},
+		{AUD_DCOC_1_SRC, 0x0000001b},
+		{AUD_DCOC1_SHIFT, 0x00000000},
+		{AUD_DCOC_1_SHIFT_IN0, 0x0000000a},
+		{AUD_DCOC_1_SHIFT_IN1, 0x00000008},
+		{AUD_IIR3_1_SEL, 0x00000023},
+		{AUD_DN0_FREQ, 0x000035a3},
+		{AUD_DN2_FREQ, 0x000029c7},
+		{AUD_CRDC0_SRC_SEL, 0x00000511},
+		{AUD_IIR1_0_SEL, 0x00000001},
+		{AUD_IIR1_1_SEL, 0x00000000},
+		{AUD_IIR3_2_SEL, 0x00000003},
+		{AUD_IIR3_2_SHIFT, 0x00000000},
+		{AUD_IIR3_0_SEL, 0x00000002},
+		{AUD_IIR2_0_SEL, 0x00000021},
+		{AUD_IIR2_0_SHIFT, 0x00000002},
+		{AUD_DEEMPH0_SRC_SEL, 0x0000000b},
+		{AUD_DEEMPH1_SRC_SEL, 0x0000000b},
+		{AUD_POLYPH80SCALEFAC, 0x00000001},
+		{AUD_START_TIMER, 0x00000000},
+		{ /* end of list */ },
+	};
+
+	static const struct rlist am_l[] = {
+		{AUD_ERRLOGPERIOD_R, 0x00000064},
+		{AUD_ERRINTRPTTHSHLD1_R, 0x00000FFF},
+		{AUD_ERRINTRPTTHSHLD2_R, 0x0000001F},
+		{AUD_ERRINTRPTTHSHLD3_R, 0x0000000F},
+		{AUD_PDF_DDS_CNST_BYTE2, 0x48},
+		{AUD_PDF_DDS_CNST_BYTE1, 0x3D},
+		{AUD_QAM_MODE, 0x00},
+		{AUD_PDF_DDS_CNST_BYTE0, 0xf5},
+		{AUD_PHACC_FREQ_8MSB, 0x3a},
+		{AUD_PHACC_FREQ_8LSB, 0x4a},
+		{AUD_DEEMPHGAIN_R, 0x00006680},
+		{AUD_DEEMPHNUMER1_R, 0x000353DE},
+		{AUD_DEEMPHNUMER2_R, 0x000001B1},
+		{AUD_DEEMPHDENOM1_R, 0x0000F3D0},
+		{AUD_DEEMPHDENOM2_R, 0x00000000},
+		{AUD_FM_MODE_ENABLE, 0x00000007},
+		{AUD_POLYPH80SCALEFAC, 0x00000003},
+		{AUD_AFE_12DB_EN, 0x00000001},
+		{AAGC_GAIN, 0x00000000},
+		{AAGC_HYST, 0x00000018},
+		{AAGC_DEF, 0x00000020},
+		{AUD_DN0_FREQ, 0x00000000},
+		{AUD_POLY0_DDS_CONSTANT, 0x000E4DB2},
+		{AUD_DCOC_0_SRC, 0x00000021},
+		{AUD_IIR1_0_SEL, 0x00000000},
+		{AUD_IIR1_0_SHIFT, 0x00000007},
+		{AUD_IIR1_1_SEL, 0x00000002},
+		{AUD_IIR1_1_SHIFT, 0x00000000},
+		{AUD_DCOC_1_SRC, 0x00000003},
+		{AUD_DCOC1_SHIFT, 0x00000000},
+		{AUD_DCOC_PASS_IN, 0x00000000},
+		{AUD_IIR1_2_SEL, 0x00000023},
+		{AUD_IIR1_2_SHIFT, 0x00000000},
+		{AUD_IIR1_3_SEL, 0x00000004},
+		{AUD_IIR1_3_SHIFT, 0x00000007},
+		{AUD_IIR1_4_SEL, 0x00000005},
+		{AUD_IIR1_4_SHIFT, 0x00000007},
+		{AUD_IIR3_0_SEL, 0x00000007},
+		{AUD_IIR3_0_SHIFT, 0x00000000},
+		{AUD_DEEMPH0_SRC_SEL, 0x00000011},
+		{AUD_DEEMPH0_SHIFT, 0x00000000},
+		{AUD_DEEMPH0_G0, 0x00007000},
+		{AUD_DEEMPH0_A0, 0x00000000},
+		{AUD_DEEMPH0_B0, 0x00000000},
+		{AUD_DEEMPH0_A1, 0x00000000},
+		{AUD_DEEMPH0_B1, 0x00000000},
+		{AUD_DEEMPH1_SRC_SEL, 0x00000011},
+		{AUD_DEEMPH1_SHIFT, 0x00000000},
+		{AUD_DEEMPH1_G0, 0x00007000},
+		{AUD_DEEMPH1_A0, 0x00000000},
+		{AUD_DEEMPH1_B0, 0x00000000},
+		{AUD_DEEMPH1_A1, 0x00000000},
+		{AUD_DEEMPH1_B1, 0x00000000},
+		{AUD_OUT0_SEL, 0x0000003F},
+		{AUD_OUT1_SEL, 0x0000003F},
+		{AUD_DMD_RA_DDS, 0x00F5C285},
+		{AUD_PLL_INT, 0x0000001E},
+		{AUD_PLL_DDS, 0x00000000},
+		{AUD_PLL_FRAC, 0x0000E542},
+		{AUD_RATE_ADJ1, 0x00000100},
+		{AUD_RATE_ADJ2, 0x00000200},
+		{AUD_RATE_ADJ3, 0x00000300},
+		{AUD_RATE_ADJ4, 0x00000400},
+		{AUD_RATE_ADJ5, 0x00000500},
+		{AUD_RATE_THRES_DMD, 0x000000C0},
+		{ /* end of list */ },
+	};
+
+	static const struct rlist a2_deemph50[] = {
+		{AUD_DEEMPH0_G0, 0x00000380},
+		{AUD_DEEMPH1_G0, 0x00000380},
+		{AUD_DEEMPHGAIN_R, 0x000011e1},
+		{AUD_DEEMPHNUMER1_R, 0x0002a7bc},
+		{AUD_DEEMPHNUMER2_R, 0x0003023c},
+		{ /* end of list */ },
+	};
+
+	set_audio_start(core, SEL_A2);
+	switch (core->tvaudio) {
+	case WW_BG:
+		dprintk("%s PAL-BG A1/2 (status: known-good)\n", __func__);
+		set_audio_registers(core, a2_bgdk_common);
+		set_audio_registers(core, a2_bg);
+		set_audio_registers(core, a2_deemph50);
+		break;
+	case WW_DK:
+		dprintk("%s PAL-DK A1/2 (status: known-good)\n", __func__);
+		set_audio_registers(core, a2_bgdk_common);
+		set_audio_registers(core, a2_dk);
+		set_audio_registers(core, a2_deemph50);
+		break;
+	case WW_I:
+		dprintk("%s PAL-I A1 (status: known-good)\n", __func__);
+		set_audio_registers(core, a1_i);
+		set_audio_registers(core, a2_deemph50);
+		break;
+	case WW_L:
+		dprintk("%s AM-L (status: devel)\n", __func__);
+		set_audio_registers(core, am_l);
+		break;
+	case WW_NONE:
+	case WW_BTSC:
+	case WW_EIAJ:
+	case WW_I2SPT:
+	case WW_FM:
+	case WW_I2SADC:
+	case WW_M:
+		dprintk("%s Warning: wrong value\n", __func__);
+		return;
+	}
+
+	mode |= EN_FMRADIO_EN_RDS | EN_DMTRX_SUMDIFF;
+	set_audio_finish(core, mode);
+}
+
+static void set_audio_standard_EIAJ(struct cx88_core *core)
+{
+	static const struct rlist eiaj[] = {
+		/* TODO: eiaj register settings are not there yet ... */
+
+		{ /* end of list */ },
+	};
+	dprintk("%s (status: unknown)\n", __func__);
+
+	set_audio_start(core, SEL_EIAJ);
+	set_audio_registers(core, eiaj);
+	set_audio_finish(core, EN_EIAJ_AUTO_STEREO);
+}
+
+static void set_audio_standard_FM(struct cx88_core *core,
+				  enum cx88_deemph_type deemph)
+{
+	static const struct rlist fm_deemph_50[] = {
+		{AUD_DEEMPH0_G0, 0x0C45},
+		{AUD_DEEMPH0_A0, 0x6262},
+		{AUD_DEEMPH0_B0, 0x1C29},
+		{AUD_DEEMPH0_A1, 0x3FC66},
+		{AUD_DEEMPH0_B1, 0x399A},
+
+		{AUD_DEEMPH1_G0, 0x0D80},
+		{AUD_DEEMPH1_A0, 0x6262},
+		{AUD_DEEMPH1_B0, 0x1C29},
+		{AUD_DEEMPH1_A1, 0x3FC66},
+		{AUD_DEEMPH1_B1, 0x399A},
+
+		{AUD_POLYPH80SCALEFAC, 0x0003},
+		{ /* end of list */ },
+	};
+	static const struct rlist fm_deemph_75[] = {
+		{AUD_DEEMPH0_G0, 0x091B},
+		{AUD_DEEMPH0_A0, 0x6B68},
+		{AUD_DEEMPH0_B0, 0x11EC},
+		{AUD_DEEMPH0_A1, 0x3FC66},
+		{AUD_DEEMPH0_B1, 0x399A},
+
+		{AUD_DEEMPH1_G0, 0x0AA0},
+		{AUD_DEEMPH1_A0, 0x6B68},
+		{AUD_DEEMPH1_B0, 0x11EC},
+		{AUD_DEEMPH1_A1, 0x3FC66},
+		{AUD_DEEMPH1_B1, 0x399A},
+
+		{AUD_POLYPH80SCALEFAC, 0x0003},
+		{ /* end of list */ },
+	};
+
+	/*
+	 * It is enough to leave default values?
+	 *
+	 * No, it's not!  The deemphasis registers are reset to the 75us
+	 * values by default.  Analyzing the spectrum of the decoded audio
+	 * reveals that "no deemphasis" is the same as 75 us, while the 50 us
+	 * setting results in less deemphasis.
+	 */
+	static const struct rlist fm_no_deemph[] = {
+		{AUD_POLYPH80SCALEFAC, 0x0003},
+		{ /* end of list */ },
+	};
+
+	dprintk("%s (status: unknown)\n", __func__);
+	set_audio_start(core, SEL_FMRADIO);
+
+	switch (deemph) {
+	default:
+	case FM_NO_DEEMPH:
+		set_audio_registers(core, fm_no_deemph);
+		break;
+
+	case FM_DEEMPH_50:
+		set_audio_registers(core, fm_deemph_50);
+		break;
+
+	case FM_DEEMPH_75:
+		set_audio_registers(core, fm_deemph_75);
+		break;
+	}
+
+	set_audio_finish(core, EN_FMRADIO_AUTO_STEREO);
+}
+
+/* ----------------------------------------------------------- */
+
+static int cx88_detect_nicam(struct cx88_core *core)
+{
+	int i, j = 0;
+
+	dprintk("start nicam autodetect.\n");
+
+	for (i = 0; i < 6; i++) {
+		/* if bit1=1 then nicam is detected */
+		j += ((cx_read(AUD_NICAM_STATUS2) & 0x02) >> 1);
+
+		if (j == 1) {
+			dprintk("nicam is detected.\n");
+			return 1;
+		}
+
+		/* wait a little bit for next reading status */
+		usleep_range(10000, 20000);
+	}
+
+	dprintk("nicam is not detected.\n");
+	return 0;
+}
+
+void cx88_set_tvaudio(struct cx88_core *core)
+{
+	switch (core->tvaudio) {
+	case WW_BTSC:
+		set_audio_standard_BTSC(core, 0, EN_BTSC_AUTO_STEREO);
+		break;
+	case WW_BG:
+	case WW_DK:
+	case WW_M:
+	case WW_I:
+	case WW_L:
+		/* prepare all dsp registers */
+		set_audio_standard_A2(core, EN_A2_FORCE_MONO1);
+
+		/*
+		 * set nicam mode - otherwise
+		 * AUD_NICAM_STATUS2 contains wrong values
+		 */
+		set_audio_standard_NICAM(core, EN_NICAM_AUTO_STEREO);
+		if (cx88_detect_nicam(core) == 0) {
+			/* fall back to fm / am mono */
+			set_audio_standard_A2(core, EN_A2_FORCE_MONO1);
+			core->audiomode_current = V4L2_TUNER_MODE_MONO;
+			core->use_nicam = 0;
+		} else {
+			core->use_nicam = 1;
+		}
+		break;
+	case WW_EIAJ:
+		set_audio_standard_EIAJ(core);
+		break;
+	case WW_FM:
+		set_audio_standard_FM(core, radio_deemphasis);
+		break;
+	case WW_I2SADC:
+		set_audio_start(core, 0x01);
+		/*
+		 * Slave/Philips/Autobaud
+		 * NB on Nova-S bit1 NPhilipsSony appears to be inverted:
+		 *	0= Sony, 1=Philips
+		 */
+		cx_write(AUD_I2SINPUTCNTL, core->board.i2sinputcntl);
+		/* Switch to "I2S ADC mode" */
+		cx_write(AUD_I2SCNTL, 0x1);
+		set_audio_finish(core, EN_I2SIN_ENABLE);
+		break;
+	case WW_NONE:
+	case WW_I2SPT:
+		pr_info("unknown tv audio mode [%d]\n", core->tvaudio);
+		break;
+	}
+}
+EXPORT_SYMBOL(cx88_set_tvaudio);
+
+void cx88_newstation(struct cx88_core *core)
+{
+	core->audiomode_manual = UNSET;
+	core->last_change = jiffies;
+}
+EXPORT_SYMBOL(cx88_newstation);
+
+void cx88_get_stereo(struct cx88_core *core, struct v4l2_tuner *t)
+{
+	static const char * const m[] = { "stereo", "dual mono",
+					  "mono",   "sap" };
+	static const char * const p[] = { "no pilot", "pilot c1",
+					  "pilot c2", "?" };
+	u32 reg, mode, pilot;
+
+	reg = cx_read(AUD_STATUS);
+	mode = reg & 0x03;
+	pilot = (reg >> 2) & 0x03;
+
+	if (core->astat != reg)
+		dprintk("AUD_STATUS: 0x%x [%s/%s] ctl=%s\n",
+			reg, m[mode], p[pilot],
+			aud_ctl_names[cx_read(AUD_CTL) & 63]);
+	core->astat = reg;
+
+	t->capability = V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_SAP |
+	    V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2;
+	t->rxsubchans = UNSET;
+	t->audmode = V4L2_TUNER_MODE_MONO;
+
+	switch (mode) {
+	case 0:
+		t->audmode = V4L2_TUNER_MODE_STEREO;
+		break;
+	case 1:
+		t->audmode = V4L2_TUNER_MODE_LANG2;
+		break;
+	case 2:
+		t->audmode = V4L2_TUNER_MODE_MONO;
+		break;
+	case 3:
+		t->audmode = V4L2_TUNER_MODE_SAP;
+		break;
+	}
+
+	switch (core->tvaudio) {
+	case WW_BTSC:
+	case WW_BG:
+	case WW_DK:
+	case WW_M:
+	case WW_EIAJ:
+		if (!core->use_nicam) {
+			t->rxsubchans = cx88_dsp_detect_stereo_sap(core);
+			break;
+		}
+		break;
+	case WW_NONE:
+	case WW_I:
+	case WW_L:
+	case WW_I2SPT:
+	case WW_FM:
+	case WW_I2SADC:
+		/* nothing */
+		break;
+	}
+
+	/* If software stereo detection is not supported... */
+	if (t->rxsubchans == UNSET) {
+		t->rxsubchans = V4L2_TUNER_SUB_MONO;
+		/*
+		 * If the hardware itself detected stereo, also return
+		 * stereo as an available subchannel
+		 */
+		if (t->audmode == V4L2_TUNER_MODE_STEREO)
+			t->rxsubchans |= V4L2_TUNER_SUB_STEREO;
+	}
+}
+EXPORT_SYMBOL(cx88_get_stereo);
+
+
+void cx88_set_stereo(struct cx88_core *core, u32 mode, int manual)
+{
+	u32 ctl = UNSET;
+	u32 mask = UNSET;
+
+	if (manual) {
+		core->audiomode_manual = mode;
+	} else {
+		if (core->audiomode_manual != UNSET)
+			return;
+	}
+	core->audiomode_current = mode;
+
+	switch (core->tvaudio) {
+	case WW_BTSC:
+		switch (mode) {
+		case V4L2_TUNER_MODE_MONO:
+			set_audio_standard_BTSC(core, 0, EN_BTSC_FORCE_MONO);
+			break;
+		case V4L2_TUNER_MODE_LANG1:
+			set_audio_standard_BTSC(core, 0, EN_BTSC_AUTO_STEREO);
+			break;
+		case V4L2_TUNER_MODE_LANG2:
+			set_audio_standard_BTSC(core, 1, EN_BTSC_FORCE_SAP);
+			break;
+		case V4L2_TUNER_MODE_STEREO:
+		case V4L2_TUNER_MODE_LANG1_LANG2:
+			set_audio_standard_BTSC(core, 0, EN_BTSC_FORCE_STEREO);
+			break;
+		}
+		break;
+	case WW_BG:
+	case WW_DK:
+	case WW_M:
+	case WW_I:
+	case WW_L:
+		if (core->use_nicam == 1) {
+			switch (mode) {
+			case V4L2_TUNER_MODE_MONO:
+			case V4L2_TUNER_MODE_LANG1:
+				set_audio_standard_NICAM(core,
+							 EN_NICAM_FORCE_MONO1);
+				break;
+			case V4L2_TUNER_MODE_LANG2:
+				set_audio_standard_NICAM(core,
+							 EN_NICAM_FORCE_MONO2);
+				break;
+			case V4L2_TUNER_MODE_STEREO:
+			case V4L2_TUNER_MODE_LANG1_LANG2:
+				set_audio_standard_NICAM(core,
+							 EN_NICAM_FORCE_STEREO);
+				break;
+			}
+		} else {
+			if ((core->tvaudio == WW_I) ||
+			    (core->tvaudio == WW_L)) {
+				/* fall back to fm / am mono */
+				set_audio_standard_A2(core, EN_A2_FORCE_MONO1);
+			} else {
+				/* TODO: Add A2 autodection */
+				mask = 0x3f;
+				switch (mode) {
+				case V4L2_TUNER_MODE_MONO:
+				case V4L2_TUNER_MODE_LANG1:
+					ctl = EN_A2_FORCE_MONO1;
+					break;
+				case V4L2_TUNER_MODE_LANG2:
+					ctl = EN_A2_FORCE_MONO2;
+					break;
+				case V4L2_TUNER_MODE_STEREO:
+				case V4L2_TUNER_MODE_LANG1_LANG2:
+					ctl = EN_A2_FORCE_STEREO;
+					break;
+				}
+			}
+		}
+		break;
+	case WW_FM:
+		switch (mode) {
+		case V4L2_TUNER_MODE_MONO:
+			ctl = EN_FMRADIO_FORCE_MONO;
+			mask = 0x3f;
+			break;
+		case V4L2_TUNER_MODE_STEREO:
+			ctl = EN_FMRADIO_AUTO_STEREO;
+			mask = 0x3f;
+			break;
+		}
+		break;
+	case WW_I2SADC:
+	case WW_NONE:
+	case WW_EIAJ:
+	case WW_I2SPT:
+		/* DO NOTHING */
+		break;
+	}
+
+	if (ctl != UNSET) {
+		dprintk("cx88_set_stereo: mask 0x%x, ctl 0x%x [status=0x%x,ctl=0x%x,vol=0x%x]\n",
+			mask, ctl, cx_read(AUD_STATUS),
+			cx_read(AUD_CTL), cx_sread(SHADOW_AUD_VOL_CTL));
+		cx_andor(AUD_CTL, mask, ctl);
+	}
+}
+EXPORT_SYMBOL(cx88_set_stereo);
+
+int cx88_audio_thread(void *data)
+{
+	struct cx88_core *core = data;
+	struct v4l2_tuner t;
+	u32 mode = 0;
+
+	dprintk("cx88: tvaudio thread started\n");
+	set_freezable();
+	for (;;) {
+		msleep_interruptible(1000);
+		if (kthread_should_stop())
+			break;
+		try_to_freeze();
+
+		switch (core->tvaudio) {
+		case WW_BG:
+		case WW_DK:
+		case WW_M:
+		case WW_I:
+		case WW_L:
+			if (core->use_nicam)
+				goto hw_autodetect;
+
+			/* just monitor the audio status for now ... */
+			memset(&t, 0, sizeof(t));
+			cx88_get_stereo(core, &t);
+
+			if (core->audiomode_manual != UNSET)
+				/* manually set, don't do anything. */
+				continue;
+
+			/* monitor signal and set stereo if available */
+			if (t.rxsubchans & V4L2_TUNER_SUB_STEREO)
+				mode = V4L2_TUNER_MODE_STEREO;
+			else
+				mode = V4L2_TUNER_MODE_MONO;
+			if (mode == core->audiomode_current)
+				continue;
+			/* automatically switch to best available mode */
+			cx88_set_stereo(core, mode, 0);
+			break;
+		case WW_NONE:
+		case WW_BTSC:
+		case WW_EIAJ:
+		case WW_I2SPT:
+		case WW_FM:
+		case WW_I2SADC:
+hw_autodetect:
+			/*
+			 * stereo autodetection is supported by hardware so
+			 * we don't need to do it manually. Do nothing.
+			 */
+			break;
+		}
+	}
+
+	dprintk("cx88: tvaudio thread exiting\n");
+	return 0;
+}
+EXPORT_SYMBOL(cx88_audio_thread);
diff --git a/drivers/media/pci/cx88/cx88-vbi.c b/drivers/media/pci/cx88/cx88-vbi.c
new file mode 100644
index 000000000..469aeaa72
--- /dev/null
+++ b/drivers/media/pci/cx88/cx88-vbi.c
@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ */
+
+#include "cx88.h"
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+
+static unsigned int vbi_debug;
+module_param(vbi_debug, int, 0644);
+MODULE_PARM_DESC(vbi_debug, "enable debug messages [vbi]");
+
+#define dprintk(level, fmt, arg...) do {			\
+	if (vbi_debug >= level)					\
+		printk(KERN_DEBUG pr_fmt("%s: vbi:" fmt),	\
+			__func__, ##arg);			\
+} while (0)
+
+/* ------------------------------------------------------------------ */
+
+int cx8800_vbi_fmt(struct file *file, void *priv,
+		   struct v4l2_format *f)
+{
+	struct cx8800_dev *dev = video_drvdata(file);
+
+	f->fmt.vbi.samples_per_line = VBI_LINE_LENGTH;
+	f->fmt.vbi.sample_format = V4L2_PIX_FMT_GREY;
+	f->fmt.vbi.offset = 244;
+
+	if (dev->core->tvnorm & V4L2_STD_525_60) {
+		/* ntsc */
+		f->fmt.vbi.sampling_rate = 28636363;
+		f->fmt.vbi.start[0] = 10;
+		f->fmt.vbi.start[1] = 273;
+		f->fmt.vbi.count[0] = VBI_LINE_NTSC_COUNT;
+		f->fmt.vbi.count[1] = VBI_LINE_NTSC_COUNT;
+
+	} else if (dev->core->tvnorm & V4L2_STD_625_50) {
+		/* pal */
+		f->fmt.vbi.sampling_rate = 35468950;
+		f->fmt.vbi.start[0] = V4L2_VBI_ITU_625_F1_START + 5;
+		f->fmt.vbi.start[1] = V4L2_VBI_ITU_625_F2_START + 5;
+		f->fmt.vbi.count[0] = VBI_LINE_PAL_COUNT;
+		f->fmt.vbi.count[1] = VBI_LINE_PAL_COUNT;
+	}
+	return 0;
+}
+
+static int cx8800_start_vbi_dma(struct cx8800_dev    *dev,
+				struct cx88_dmaqueue *q,
+				struct cx88_buffer   *buf)
+{
+	struct cx88_core *core = dev->core;
+
+	/* setup fifo + format */
+	cx88_sram_channel_setup(dev->core, &cx88_sram_channels[SRAM_CH24],
+				VBI_LINE_LENGTH, buf->risc.dma);
+
+	cx_write(MO_VBOS_CONTROL, (1 << 18) |  /* comb filter delay fixup */
+				  (1 << 15) |  /* enable vbi capture */
+				  (1 << 11));
+
+	/* reset counter */
+	cx_write(MO_VBI_GPCNTRL, GP_COUNT_CONTROL_RESET);
+	q->count = 0;
+
+	/* enable irqs */
+	cx_set(MO_PCI_INTMSK, core->pci_irqmask | PCI_INT_VIDINT);
+	cx_set(MO_VID_INTMSK, 0x0f0088);
+
+	/* enable capture */
+	cx_set(VID_CAPTURE_CONTROL, 0x18);
+
+	/* start dma */
+	cx_set(MO_DEV_CNTRL2, (1 << 5));
+	cx_set(MO_VID_DMACNTRL, 0x88);
+
+	return 0;
+}
+
+void cx8800_stop_vbi_dma(struct cx8800_dev *dev)
+{
+	struct cx88_core *core = dev->core;
+
+	/* stop dma */
+	cx_clear(MO_VID_DMACNTRL, 0x88);
+
+	/* disable capture */
+	cx_clear(VID_CAPTURE_CONTROL, 0x18);
+
+	/* disable irqs */
+	cx_clear(MO_PCI_INTMSK, PCI_INT_VIDINT);
+	cx_clear(MO_VID_INTMSK, 0x0f0088);
+}
+
+int cx8800_restart_vbi_queue(struct cx8800_dev    *dev,
+			     struct cx88_dmaqueue *q)
+{
+	struct cx88_buffer *buf;
+
+	if (list_empty(&q->active))
+		return 0;
+
+	buf = list_entry(q->active.next, struct cx88_buffer, list);
+	dprintk(2, "restart_queue [%p/%d]: restart dma\n",
+		buf, buf->vb.vb2_buf.index);
+	cx8800_start_vbi_dma(dev, q, buf);
+	return 0;
+}
+
+/* ------------------------------------------------------------------ */
+
+static int queue_setup(struct vb2_queue *q,
+		       unsigned int *num_buffers, unsigned int *num_planes,
+		       unsigned int sizes[], struct device *alloc_devs[])
+{
+	struct cx8800_dev *dev = q->drv_priv;
+
+	*num_planes = 1;
+	if (dev->core->tvnorm & V4L2_STD_525_60)
+		sizes[0] = VBI_LINE_NTSC_COUNT * VBI_LINE_LENGTH * 2;
+	else
+		sizes[0] = VBI_LINE_PAL_COUNT * VBI_LINE_LENGTH * 2;
+	return 0;
+}
+
+static int buffer_prepare(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct cx8800_dev *dev = vb->vb2_queue->drv_priv;
+	struct cx88_buffer *buf = container_of(vbuf, struct cx88_buffer, vb);
+	struct sg_table *sgt = vb2_dma_sg_plane_desc(vb, 0);
+	unsigned int lines;
+	unsigned int size;
+
+	if (dev->core->tvnorm & V4L2_STD_525_60)
+		lines = VBI_LINE_NTSC_COUNT;
+	else
+		lines = VBI_LINE_PAL_COUNT;
+	size = lines * VBI_LINE_LENGTH * 2;
+	if (vb2_plane_size(vb, 0) < size)
+		return -EINVAL;
+	vb2_set_plane_payload(vb, 0, size);
+
+	return cx88_risc_buffer(dev->pci, &buf->risc, sgt->sgl,
+				0, VBI_LINE_LENGTH * lines,
+				VBI_LINE_LENGTH, 0,
+				lines);
+}
+
+static void buffer_finish(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct cx8800_dev *dev = vb->vb2_queue->drv_priv;
+	struct cx88_buffer *buf = container_of(vbuf, struct cx88_buffer, vb);
+	struct cx88_riscmem *risc = &buf->risc;
+
+	if (risc->cpu)
+		dma_free_coherent(&dev->pci->dev, risc->size, risc->cpu,
+				  risc->dma);
+	memset(risc, 0, sizeof(*risc));
+}
+
+static void buffer_queue(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct cx8800_dev *dev = vb->vb2_queue->drv_priv;
+	struct cx88_buffer    *buf = container_of(vbuf, struct cx88_buffer, vb);
+	struct cx88_buffer    *prev;
+	struct cx88_dmaqueue  *q    = &dev->vbiq;
+
+	/* add jump to start */
+	buf->risc.cpu[1] = cpu_to_le32(buf->risc.dma + 8);
+	buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_CNT_INC);
+	buf->risc.jmp[1] = cpu_to_le32(buf->risc.dma + 8);
+
+	if (list_empty(&q->active)) {
+		list_add_tail(&buf->list, &q->active);
+		dprintk(2, "[%p/%d] vbi_queue - first active\n",
+			buf, buf->vb.vb2_buf.index);
+
+	} else {
+		buf->risc.cpu[0] |= cpu_to_le32(RISC_IRQ1);
+		prev = list_entry(q->active.prev, struct cx88_buffer, list);
+		list_add_tail(&buf->list, &q->active);
+		prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma);
+		dprintk(2, "[%p/%d] buffer_queue - append to active\n",
+			buf, buf->vb.vb2_buf.index);
+	}
+}
+
+static int start_streaming(struct vb2_queue *q, unsigned int count)
+{
+	struct cx8800_dev *dev = q->drv_priv;
+	struct cx88_dmaqueue *dmaq = &dev->vbiq;
+	struct cx88_buffer *buf = list_entry(dmaq->active.next,
+			struct cx88_buffer, list);
+
+	cx8800_start_vbi_dma(dev, dmaq, buf);
+	return 0;
+}
+
+static void stop_streaming(struct vb2_queue *q)
+{
+	struct cx8800_dev *dev = q->drv_priv;
+	struct cx88_core *core = dev->core;
+	struct cx88_dmaqueue *dmaq = &dev->vbiq;
+	unsigned long flags;
+
+	cx_clear(MO_VID_DMACNTRL, 0x11);
+	cx_clear(VID_CAPTURE_CONTROL, 0x06);
+	cx8800_stop_vbi_dma(dev);
+	spin_lock_irqsave(&dev->slock, flags);
+	while (!list_empty(&dmaq->active)) {
+		struct cx88_buffer *buf = list_entry(dmaq->active.next,
+			struct cx88_buffer, list);
+
+		list_del(&buf->list);
+		vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+	}
+	spin_unlock_irqrestore(&dev->slock, flags);
+}
+
+const struct vb2_ops cx8800_vbi_qops = {
+	.queue_setup    = queue_setup,
+	.buf_prepare  = buffer_prepare,
+	.buf_finish = buffer_finish,
+	.buf_queue    = buffer_queue,
+	.wait_prepare = vb2_ops_wait_prepare,
+	.wait_finish = vb2_ops_wait_finish,
+	.start_streaming = start_streaming,
+	.stop_streaming = stop_streaming,
+};
diff --git a/drivers/media/pci/cx88/cx88-video.c b/drivers/media/pci/cx88/cx88-video.c
new file mode 100644
index 000000000..c0ef03ed7
--- /dev/null
+++ b/drivers/media/pci/cx88/cx88-video.c
@@ -0,0 +1,1635 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *
+ * device driver for Conexant 2388x based TV cards
+ * video4linux video interface
+ *
+ * (c) 2003-04 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
+ *
+ * (c) 2005-2006 Mauro Carvalho Chehab <mchehab@kernel.org>
+ *	- Multituner support
+ *	- video_ioctl2 conversion
+ *	- PAL/M fixes
+ */
+
+#include "cx88.h"
+
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/kmod.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/kthread.h>
+#include <asm/div64.h>
+
+#include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-event.h>
+#include <media/i2c/wm8775.h>
+
+MODULE_DESCRIPTION("v4l2 driver module for cx2388x based TV cards");
+MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION(CX88_VERSION);
+
+/* ------------------------------------------------------------------ */
+
+static unsigned int video_nr[] = {[0 ... (CX88_MAXBOARDS - 1)] = UNSET };
+static unsigned int vbi_nr[]   = {[0 ... (CX88_MAXBOARDS - 1)] = UNSET };
+static unsigned int radio_nr[] = {[0 ... (CX88_MAXBOARDS - 1)] = UNSET };
+
+module_param_array(video_nr, int, NULL, 0444);
+module_param_array(vbi_nr,   int, NULL, 0444);
+module_param_array(radio_nr, int, NULL, 0444);
+
+MODULE_PARM_DESC(video_nr, "video device numbers");
+MODULE_PARM_DESC(vbi_nr, "vbi device numbers");
+MODULE_PARM_DESC(radio_nr, "radio device numbers");
+
+static unsigned int video_debug;
+module_param(video_debug, int, 0644);
+MODULE_PARM_DESC(video_debug, "enable debug messages [video]");
+
+static unsigned int irq_debug;
+module_param(irq_debug, int, 0644);
+MODULE_PARM_DESC(irq_debug, "enable debug messages [IRQ handler]");
+
+#define dprintk(level, fmt, arg...) do {			\
+	if (video_debug >= level)				\
+		printk(KERN_DEBUG pr_fmt("%s: video:" fmt),	\
+			__func__, ##arg);			\
+} while (0)
+
+/* ------------------------------------------------------------------- */
+/* static data                                                         */
+
+static const struct cx8800_fmt formats[] = {
+	{
+		.fourcc   = V4L2_PIX_FMT_GREY,
+		.cxformat = ColorFormatY8,
+		.depth    = 8,
+		.flags    = FORMAT_FLAGS_PACKED,
+	}, {
+		.fourcc   = V4L2_PIX_FMT_RGB555,
+		.cxformat = ColorFormatRGB15,
+		.depth    = 16,
+		.flags    = FORMAT_FLAGS_PACKED,
+	}, {
+		.fourcc   = V4L2_PIX_FMT_RGB555X,
+		.cxformat = ColorFormatRGB15 | ColorFormatBSWAP,
+		.depth    = 16,
+		.flags    = FORMAT_FLAGS_PACKED,
+	}, {
+		.fourcc   = V4L2_PIX_FMT_RGB565,
+		.cxformat = ColorFormatRGB16,
+		.depth    = 16,
+		.flags    = FORMAT_FLAGS_PACKED,
+	}, {
+		.fourcc   = V4L2_PIX_FMT_RGB565X,
+		.cxformat = ColorFormatRGB16 | ColorFormatBSWAP,
+		.depth    = 16,
+		.flags    = FORMAT_FLAGS_PACKED,
+	}, {
+		.fourcc   = V4L2_PIX_FMT_BGR24,
+		.cxformat = ColorFormatRGB24,
+		.depth    = 24,
+		.flags    = FORMAT_FLAGS_PACKED,
+	}, {
+		.fourcc   = V4L2_PIX_FMT_BGR32,
+		.cxformat = ColorFormatRGB32,
+		.depth    = 32,
+		.flags    = FORMAT_FLAGS_PACKED,
+	}, {
+		.fourcc   = V4L2_PIX_FMT_RGB32,
+		.cxformat = ColorFormatRGB32 | ColorFormatBSWAP |
+			    ColorFormatWSWAP,
+		.depth    = 32,
+		.flags    = FORMAT_FLAGS_PACKED,
+	}, {
+		.fourcc   = V4L2_PIX_FMT_YUYV,
+		.cxformat = ColorFormatYUY2,
+		.depth    = 16,
+		.flags    = FORMAT_FLAGS_PACKED,
+	}, {
+		.fourcc   = V4L2_PIX_FMT_UYVY,
+		.cxformat = ColorFormatYUY2 | ColorFormatBSWAP,
+		.depth    = 16,
+		.flags    = FORMAT_FLAGS_PACKED,
+	},
+};
+
+static const struct cx8800_fmt *format_by_fourcc(unsigned int fourcc)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(formats); i++)
+		if (formats[i].fourcc == fourcc)
+			return formats + i;
+	return NULL;
+}
+
+/* ------------------------------------------------------------------- */
+
+struct cx88_ctrl {
+	/* control information */
+	u32 id;
+	s32 minimum;
+	s32 maximum;
+	u32 step;
+	s32 default_value;
+
+	/* control register information */
+	u32 off;
+	u32 reg;
+	u32 sreg;
+	u32 mask;
+	u32 shift;
+};
+
+static const struct cx88_ctrl cx8800_vid_ctls[] = {
+	/* --- video --- */
+	{
+		.id            = V4L2_CID_BRIGHTNESS,
+		.minimum       = 0x00,
+		.maximum       = 0xff,
+		.step          = 1,
+		.default_value = 0x7f,
+		.off           = 128,
+		.reg           = MO_CONTR_BRIGHT,
+		.mask          = 0x00ff,
+		.shift         = 0,
+	}, {
+		.id            = V4L2_CID_CONTRAST,
+		.minimum       = 0,
+		.maximum       = 0xff,
+		.step          = 1,
+		.default_value = 0x3f,
+		.off           = 0,
+		.reg           = MO_CONTR_BRIGHT,
+		.mask          = 0xff00,
+		.shift         = 8,
+	}, {
+		.id            = V4L2_CID_HUE,
+		.minimum       = 0,
+		.maximum       = 0xff,
+		.step          = 1,
+		.default_value = 0x7f,
+		.off           = 128,
+		.reg           = MO_HUE,
+		.mask          = 0x00ff,
+		.shift         = 0,
+	}, {
+		/* strictly, this only describes only U saturation.
+		 * V saturation is handled specially through code.
+		 */
+		.id            = V4L2_CID_SATURATION,
+		.minimum       = 0,
+		.maximum       = 0xff,
+		.step          = 1,
+		.default_value = 0x7f,
+		.off           = 0,
+		.reg           = MO_UV_SATURATION,
+		.mask          = 0x00ff,
+		.shift         = 0,
+	}, {
+		.id            = V4L2_CID_SHARPNESS,
+		.minimum       = 0,
+		.maximum       = 4,
+		.step          = 1,
+		.default_value = 0x0,
+		.off           = 0,
+		/*
+		 * NOTE: the value is converted and written to both even
+		 * and odd registers in the code
+		 */
+		.reg           = MO_FILTER_ODD,
+		.mask          = 7 << 7,
+		.shift         = 7,
+	}, {
+		.id            = V4L2_CID_CHROMA_AGC,
+		.minimum       = 0,
+		.maximum       = 1,
+		.default_value = 0x1,
+		.reg           = MO_INPUT_FORMAT,
+		.mask          = 1 << 10,
+		.shift         = 10,
+	}, {
+		.id            = V4L2_CID_COLOR_KILLER,
+		.minimum       = 0,
+		.maximum       = 1,
+		.default_value = 0x1,
+		.reg           = MO_INPUT_FORMAT,
+		.mask          = 1 << 9,
+		.shift         = 9,
+	}, {
+		.id            = V4L2_CID_BAND_STOP_FILTER,
+		.minimum       = 0,
+		.maximum       = 1,
+		.step          = 1,
+		.default_value = 0x0,
+		.off           = 0,
+		.reg           = MO_HTOTAL,
+		.mask          = 3 << 11,
+		.shift         = 11,
+	}
+};
+
+static const struct cx88_ctrl cx8800_aud_ctls[] = {
+	{
+		/* --- audio --- */
+		.id            = V4L2_CID_AUDIO_MUTE,
+		.minimum       = 0,
+		.maximum       = 1,
+		.default_value = 1,
+		.reg           = AUD_VOL_CTL,
+		.sreg          = SHADOW_AUD_VOL_CTL,
+		.mask          = (1 << 6),
+		.shift         = 6,
+	}, {
+		.id            = V4L2_CID_AUDIO_VOLUME,
+		.minimum       = 0,
+		.maximum       = 0x3f,
+		.step          = 1,
+		.default_value = 0x3f,
+		.reg           = AUD_VOL_CTL,
+		.sreg          = SHADOW_AUD_VOL_CTL,
+		.mask          = 0x3f,
+		.shift         = 0,
+	}, {
+		.id            = V4L2_CID_AUDIO_BALANCE,
+		.minimum       = 0,
+		.maximum       = 0x7f,
+		.step          = 1,
+		.default_value = 0x40,
+		.reg           = AUD_BAL_CTL,
+		.sreg          = SHADOW_AUD_BAL_CTL,
+		.mask          = 0x7f,
+		.shift         = 0,
+	}
+};
+
+enum {
+	CX8800_VID_CTLS = ARRAY_SIZE(cx8800_vid_ctls),
+	CX8800_AUD_CTLS = ARRAY_SIZE(cx8800_aud_ctls),
+};
+
+/* ------------------------------------------------------------------ */
+
+int cx88_video_mux(struct cx88_core *core, unsigned int input)
+{
+	/* struct cx88_core *core = dev->core; */
+
+	dprintk(1, "video_mux: %d [vmux=%d,gpio=0x%x,0x%x,0x%x,0x%x]\n",
+		input, INPUT(input).vmux,
+		INPUT(input).gpio0, INPUT(input).gpio1,
+		INPUT(input).gpio2, INPUT(input).gpio3);
+	core->input = input;
+	cx_andor(MO_INPUT_FORMAT, 0x03 << 14, INPUT(input).vmux << 14);
+	cx_write(MO_GP3_IO, INPUT(input).gpio3);
+	cx_write(MO_GP0_IO, INPUT(input).gpio0);
+	cx_write(MO_GP1_IO, INPUT(input).gpio1);
+	cx_write(MO_GP2_IO, INPUT(input).gpio2);
+
+	switch (INPUT(input).type) {
+	case CX88_VMUX_SVIDEO:
+		cx_set(MO_AFECFG_IO,    0x00000001);
+		cx_set(MO_INPUT_FORMAT, 0x00010010);
+		cx_set(MO_FILTER_EVEN,  0x00002020);
+		cx_set(MO_FILTER_ODD,   0x00002020);
+		break;
+	default:
+		cx_clear(MO_AFECFG_IO,    0x00000001);
+		cx_clear(MO_INPUT_FORMAT, 0x00010010);
+		cx_clear(MO_FILTER_EVEN,  0x00002020);
+		cx_clear(MO_FILTER_ODD,   0x00002020);
+		break;
+	}
+
+	/*
+	 * if there are audioroutes defined, we have an external
+	 * ADC to deal with audio
+	 */
+	if (INPUT(input).audioroute) {
+		/*
+		 * The wm8775 module has the "2" route hardwired into
+		 * the initialization. Some boards may use different
+		 * routes for different inputs. HVR-1300 surely does
+		 */
+		if (core->sd_wm8775) {
+			call_all(core, audio, s_routing,
+				 INPUT(input).audioroute, 0, 0);
+		}
+		/*
+		 * cx2388's C-ADC is connected to the tuner only.
+		 * When used with S-Video, that ADC is busy dealing with
+		 * chroma, so an external must be used for baseband audio
+		 */
+		if (INPUT(input).type != CX88_VMUX_TELEVISION &&
+		    INPUT(input).type != CX88_VMUX_CABLE) {
+			/* "I2S ADC mode" */
+			core->tvaudio = WW_I2SADC;
+			cx88_set_tvaudio(core);
+		} else {
+			/* Normal mode */
+			cx_write(AUD_I2SCNTL, 0x0);
+			cx_clear(AUD_CTL, EN_I2SIN_ENABLE);
+		}
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(cx88_video_mux);
+
+/* ------------------------------------------------------------------ */
+
+static int start_video_dma(struct cx8800_dev    *dev,
+			   struct cx88_dmaqueue *q,
+			   struct cx88_buffer   *buf)
+{
+	struct cx88_core *core = dev->core;
+
+	/* setup fifo + format */
+	cx88_sram_channel_setup(core, &cx88_sram_channels[SRAM_CH21],
+				buf->bpl, buf->risc.dma);
+	cx88_set_scale(core, core->width, core->height, core->field);
+	cx_write(MO_COLOR_CTRL, dev->fmt->cxformat | ColorFormatGamma);
+
+	/* reset counter */
+	cx_write(MO_VIDY_GPCNTRL, GP_COUNT_CONTROL_RESET);
+	q->count = 0;
+
+	/* enable irqs */
+	cx_set(MO_PCI_INTMSK, core->pci_irqmask | PCI_INT_VIDINT);
+
+	/*
+	 * Enables corresponding bits at PCI_INT_STAT:
+	 *	bits 0 to 4: video, audio, transport stream, VIP, Host
+	 *	bit 7: timer
+	 *	bits 8 and 9: DMA complete for: SRC, DST
+	 *	bits 10 and 11: BERR signal asserted for RISC: RD, WR
+	 *	bits 12 to 15: BERR signal asserted for: BRDG, SRC, DST, IPB
+	 */
+	cx_set(MO_VID_INTMSK, 0x0f0011);
+
+	/* enable capture */
+	cx_set(VID_CAPTURE_CONTROL, 0x06);
+
+	/* start dma */
+	cx_set(MO_DEV_CNTRL2, (1 << 5));
+	cx_set(MO_VID_DMACNTRL, 0x11); /* Planar Y and packed FIFO and RISC enable */
+
+	return 0;
+}
+
+static int __maybe_unused stop_video_dma(struct cx8800_dev    *dev)
+{
+	struct cx88_core *core = dev->core;
+
+	/* stop dma */
+	cx_clear(MO_VID_DMACNTRL, 0x11);
+
+	/* disable capture */
+	cx_clear(VID_CAPTURE_CONTROL, 0x06);
+
+	/* disable irqs */
+	cx_clear(MO_PCI_INTMSK, PCI_INT_VIDINT);
+	cx_clear(MO_VID_INTMSK, 0x0f0011);
+	return 0;
+}
+
+static int __maybe_unused restart_video_queue(struct cx8800_dev *dev,
+					      struct cx88_dmaqueue *q)
+{
+	struct cx88_buffer *buf;
+
+	if (!list_empty(&q->active)) {
+		buf = list_entry(q->active.next, struct cx88_buffer, list);
+		dprintk(2, "restart_queue [%p/%d]: restart dma\n",
+			buf, buf->vb.vb2_buf.index);
+		start_video_dma(dev, q, buf);
+	}
+	return 0;
+}
+
+/* ------------------------------------------------------------------ */
+
+static int queue_setup(struct vb2_queue *q,
+		       unsigned int *num_buffers, unsigned int *num_planes,
+		       unsigned int sizes[], struct device *alloc_devs[])
+{
+	struct cx8800_dev *dev = q->drv_priv;
+	struct cx88_core *core = dev->core;
+
+	*num_planes = 1;
+	sizes[0] = (dev->fmt->depth * core->width * core->height) >> 3;
+	return 0;
+}
+
+static int buffer_prepare(struct vb2_buffer *vb)
+{
+	int ret;
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct cx8800_dev *dev = vb->vb2_queue->drv_priv;
+	struct cx88_core *core = dev->core;
+	struct cx88_buffer *buf = container_of(vbuf, struct cx88_buffer, vb);
+	struct sg_table *sgt = vb2_dma_sg_plane_desc(vb, 0);
+
+	buf->bpl = core->width * dev->fmt->depth >> 3;
+
+	if (vb2_plane_size(vb, 0) < core->height * buf->bpl)
+		return -EINVAL;
+	vb2_set_plane_payload(vb, 0, core->height * buf->bpl);
+
+	switch (core->field) {
+	case V4L2_FIELD_TOP:
+		ret = cx88_risc_buffer(dev->pci, &buf->risc,
+				       sgt->sgl, 0, UNSET,
+				       buf->bpl, 0, core->height);
+		break;
+	case V4L2_FIELD_BOTTOM:
+		ret = cx88_risc_buffer(dev->pci, &buf->risc,
+				       sgt->sgl, UNSET, 0,
+				       buf->bpl, 0, core->height);
+		break;
+	case V4L2_FIELD_SEQ_TB:
+		ret = cx88_risc_buffer(dev->pci, &buf->risc,
+				       sgt->sgl,
+				       0, buf->bpl * (core->height >> 1),
+				       buf->bpl, 0,
+				       core->height >> 1);
+		break;
+	case V4L2_FIELD_SEQ_BT:
+		ret = cx88_risc_buffer(dev->pci, &buf->risc,
+				       sgt->sgl,
+				       buf->bpl * (core->height >> 1), 0,
+				       buf->bpl, 0,
+				       core->height >> 1);
+		break;
+	case V4L2_FIELD_INTERLACED:
+	default:
+		ret = cx88_risc_buffer(dev->pci, &buf->risc,
+				       sgt->sgl, 0, buf->bpl,
+				       buf->bpl, buf->bpl,
+				       core->height >> 1);
+		break;
+	}
+	dprintk(2,
+		"[%p/%d] %s - %dx%d %dbpp 0x%08x - dma=0x%08lx\n",
+		buf, buf->vb.vb2_buf.index, __func__,
+		core->width, core->height, dev->fmt->depth, dev->fmt->fourcc,
+		(unsigned long)buf->risc.dma);
+	return ret;
+}
+
+static void buffer_finish(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct cx8800_dev *dev = vb->vb2_queue->drv_priv;
+	struct cx88_buffer *buf = container_of(vbuf, struct cx88_buffer, vb);
+	struct cx88_riscmem *risc = &buf->risc;
+
+	if (risc->cpu)
+		dma_free_coherent(&dev->pci->dev, risc->size, risc->cpu,
+				  risc->dma);
+	memset(risc, 0, sizeof(*risc));
+}
+
+static void buffer_queue(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct cx8800_dev *dev = vb->vb2_queue->drv_priv;
+	struct cx88_buffer    *buf = container_of(vbuf, struct cx88_buffer, vb);
+	struct cx88_buffer    *prev;
+	struct cx88_dmaqueue  *q    = &dev->vidq;
+
+	/* add jump to start */
+	buf->risc.cpu[1] = cpu_to_le32(buf->risc.dma + 8);
+	buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_CNT_INC);
+	buf->risc.jmp[1] = cpu_to_le32(buf->risc.dma + 8);
+
+	if (list_empty(&q->active)) {
+		list_add_tail(&buf->list, &q->active);
+		dprintk(2, "[%p/%d] buffer_queue - first active\n",
+			buf, buf->vb.vb2_buf.index);
+
+	} else {
+		buf->risc.cpu[0] |= cpu_to_le32(RISC_IRQ1);
+		prev = list_entry(q->active.prev, struct cx88_buffer, list);
+		list_add_tail(&buf->list, &q->active);
+		prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma);
+		dprintk(2, "[%p/%d] buffer_queue - append to active\n",
+			buf, buf->vb.vb2_buf.index);
+	}
+}
+
+static int start_streaming(struct vb2_queue *q, unsigned int count)
+{
+	struct cx8800_dev *dev = q->drv_priv;
+	struct cx88_dmaqueue *dmaq = &dev->vidq;
+	struct cx88_buffer *buf = list_entry(dmaq->active.next,
+			struct cx88_buffer, list);
+
+	start_video_dma(dev, dmaq, buf);
+	return 0;
+}
+
+static void stop_streaming(struct vb2_queue *q)
+{
+	struct cx8800_dev *dev = q->drv_priv;
+	struct cx88_core *core = dev->core;
+	struct cx88_dmaqueue *dmaq = &dev->vidq;
+	unsigned long flags;
+
+	cx_clear(MO_VID_DMACNTRL, 0x11);
+	cx_clear(VID_CAPTURE_CONTROL, 0x06);
+	spin_lock_irqsave(&dev->slock, flags);
+	while (!list_empty(&dmaq->active)) {
+		struct cx88_buffer *buf = list_entry(dmaq->active.next,
+			struct cx88_buffer, list);
+
+		list_del(&buf->list);
+		vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+	}
+	spin_unlock_irqrestore(&dev->slock, flags);
+}
+
+static const struct vb2_ops cx8800_video_qops = {
+	.queue_setup    = queue_setup,
+	.buf_prepare  = buffer_prepare,
+	.buf_finish = buffer_finish,
+	.buf_queue    = buffer_queue,
+	.wait_prepare = vb2_ops_wait_prepare,
+	.wait_finish = vb2_ops_wait_finish,
+	.start_streaming = start_streaming,
+	.stop_streaming = stop_streaming,
+};
+
+/* ------------------------------------------------------------------ */
+
+static int radio_open(struct file *file)
+{
+	struct cx8800_dev *dev = video_drvdata(file);
+	struct cx88_core *core = dev->core;
+	int ret = v4l2_fh_open(file);
+
+	if (ret)
+		return ret;
+
+	cx_write(MO_GP3_IO, core->board.radio.gpio3);
+	cx_write(MO_GP0_IO, core->board.radio.gpio0);
+	cx_write(MO_GP1_IO, core->board.radio.gpio1);
+	cx_write(MO_GP2_IO, core->board.radio.gpio2);
+	if (core->board.radio.audioroute) {
+		if (core->sd_wm8775) {
+			call_all(core, audio, s_routing,
+				 core->board.radio.audioroute, 0, 0);
+		}
+		/* "I2S ADC mode" */
+		core->tvaudio = WW_I2SADC;
+		cx88_set_tvaudio(core);
+	} else {
+		/* FM Mode */
+		core->tvaudio = WW_FM;
+		cx88_set_tvaudio(core);
+		cx88_set_stereo(core, V4L2_TUNER_MODE_STEREO, 1);
+	}
+	call_all(core, tuner, s_radio);
+	return 0;
+}
+
+/* ------------------------------------------------------------------ */
+/* VIDEO CTRL IOCTLS                                                  */
+
+static int cx8800_s_vid_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct cx88_core *core =
+		container_of(ctrl->handler, struct cx88_core, video_hdl);
+	const struct cx88_ctrl *cc = ctrl->priv;
+	u32 value, mask;
+
+	mask = cc->mask;
+	switch (ctrl->id) {
+	case V4L2_CID_SATURATION:
+		/* special v_sat handling */
+
+		value = ((ctrl->val - cc->off) << cc->shift) & cc->mask;
+
+		if (core->tvnorm & V4L2_STD_SECAM) {
+			/* For SECAM, both U and V sat should be equal */
+			value = value << 8 | value;
+		} else {
+			/* Keeps U Saturation proportional to V Sat */
+			value = (value * 0x5a) / 0x7f << 8 | value;
+		}
+		mask = 0xffff;
+		break;
+	case V4L2_CID_SHARPNESS:
+		/* 0b000, 0b100, 0b101, 0b110, or 0b111 */
+		value = (ctrl->val < 1 ? 0 : ((ctrl->val + 3) << 7));
+		/* needs to be set for both fields */
+		cx_andor(MO_FILTER_EVEN, mask, value);
+		break;
+	case V4L2_CID_CHROMA_AGC:
+		value = ((ctrl->val - cc->off) << cc->shift) & cc->mask;
+		break;
+	default:
+		value = ((ctrl->val - cc->off) << cc->shift) & cc->mask;
+		break;
+	}
+	dprintk(1,
+		"set_control id=0x%X(%s) ctrl=0x%02x, reg=0x%02x val=0x%02x (mask 0x%02x)%s\n",
+		ctrl->id, ctrl->name, ctrl->val, cc->reg, value,
+		mask, cc->sreg ? " [shadowed]" : "");
+	if (cc->sreg)
+		cx_sandor(cc->sreg, cc->reg, mask, value);
+	else
+		cx_andor(cc->reg, mask, value);
+	return 0;
+}
+
+static int cx8800_s_aud_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct cx88_core *core =
+		container_of(ctrl->handler, struct cx88_core, audio_hdl);
+	const struct cx88_ctrl *cc = ctrl->priv;
+	u32 value, mask;
+
+	/* Pass changes onto any WM8775 */
+	if (core->sd_wm8775) {
+		switch (ctrl->id) {
+		case V4L2_CID_AUDIO_MUTE:
+			wm8775_s_ctrl(core, ctrl->id, ctrl->val);
+			break;
+		case V4L2_CID_AUDIO_VOLUME:
+			wm8775_s_ctrl(core, ctrl->id, (ctrl->val) ?
+						(0x90 + ctrl->val) << 8 : 0);
+			break;
+		case V4L2_CID_AUDIO_BALANCE:
+			wm8775_s_ctrl(core, ctrl->id, ctrl->val << 9);
+			break;
+		default:
+			break;
+		}
+	}
+
+	mask = cc->mask;
+	switch (ctrl->id) {
+	case V4L2_CID_AUDIO_BALANCE:
+		value = (ctrl->val < 0x40) ?
+			(0x7f - ctrl->val) : (ctrl->val - 0x40);
+		break;
+	case V4L2_CID_AUDIO_VOLUME:
+		value = 0x3f - (ctrl->val & 0x3f);
+		break;
+	default:
+		value = ((ctrl->val - cc->off) << cc->shift) & cc->mask;
+		break;
+	}
+	dprintk(1,
+		"set_control id=0x%X(%s) ctrl=0x%02x, reg=0x%02x val=0x%02x (mask 0x%02x)%s\n",
+		ctrl->id, ctrl->name, ctrl->val, cc->reg, value,
+		mask, cc->sreg ? " [shadowed]" : "");
+	if (cc->sreg)
+		cx_sandor(cc->sreg, cc->reg, mask, value);
+	else
+		cx_andor(cc->reg, mask, value);
+	return 0;
+}
+
+/* ------------------------------------------------------------------ */
+/* VIDEO IOCTLS                                                       */
+
+static int vidioc_g_fmt_vid_cap(struct file *file, void *priv,
+				struct v4l2_format *f)
+{
+	struct cx8800_dev *dev = video_drvdata(file);
+	struct cx88_core *core = dev->core;
+
+	f->fmt.pix.width        = core->width;
+	f->fmt.pix.height       = core->height;
+	f->fmt.pix.field        = core->field;
+	f->fmt.pix.pixelformat  = dev->fmt->fourcc;
+	f->fmt.pix.bytesperline =
+		(f->fmt.pix.width * dev->fmt->depth) >> 3;
+	f->fmt.pix.sizeimage =
+		f->fmt.pix.height * f->fmt.pix.bytesperline;
+	f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
+	return 0;
+}
+
+static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
+				  struct v4l2_format *f)
+{
+	struct cx8800_dev *dev = video_drvdata(file);
+	struct cx88_core *core = dev->core;
+	const struct cx8800_fmt *fmt;
+	enum v4l2_field   field;
+	unsigned int      maxw, maxh;
+
+	fmt = format_by_fourcc(f->fmt.pix.pixelformat);
+	if (!fmt)
+		return -EINVAL;
+
+	maxw = norm_maxw(core->tvnorm);
+	maxh = norm_maxh(core->tvnorm);
+
+	field = f->fmt.pix.field;
+
+	switch (field) {
+	case V4L2_FIELD_TOP:
+	case V4L2_FIELD_BOTTOM:
+	case V4L2_FIELD_INTERLACED:
+	case V4L2_FIELD_SEQ_BT:
+	case V4L2_FIELD_SEQ_TB:
+		break;
+	default:
+		field = (f->fmt.pix.height > maxh / 2)
+			? V4L2_FIELD_INTERLACED
+			: V4L2_FIELD_BOTTOM;
+		break;
+	}
+	if (V4L2_FIELD_HAS_T_OR_B(field))
+		maxh /= 2;
+
+	v4l_bound_align_image(&f->fmt.pix.width, 48, maxw, 2,
+			      &f->fmt.pix.height, 32, maxh, 0, 0);
+	f->fmt.pix.field = field;
+	f->fmt.pix.bytesperline =
+		(f->fmt.pix.width * fmt->depth) >> 3;
+	f->fmt.pix.sizeimage =
+		f->fmt.pix.height * f->fmt.pix.bytesperline;
+	f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
+
+	return 0;
+}
+
+static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
+				struct v4l2_format *f)
+{
+	struct cx8800_dev *dev = video_drvdata(file);
+	struct cx88_core *core = dev->core;
+	int err = vidioc_try_fmt_vid_cap(file, priv, f);
+
+	if (err != 0)
+		return err;
+	if (vb2_is_busy(&dev->vb2_vidq) || vb2_is_busy(&dev->vb2_vbiq))
+		return -EBUSY;
+	if (core->dvbdev && vb2_is_busy(&core->dvbdev->vb2_mpegq))
+		return -EBUSY;
+	dev->fmt = format_by_fourcc(f->fmt.pix.pixelformat);
+	core->width = f->fmt.pix.width;
+	core->height = f->fmt.pix.height;
+	core->field = f->fmt.pix.field;
+	return 0;
+}
+
+int cx88_querycap(struct file *file, struct cx88_core *core,
+		  struct v4l2_capability *cap)
+{
+	strscpy(cap->card, core->board.name, sizeof(cap->card));
+	cap->capabilities = V4L2_CAP_READWRITE | V4L2_CAP_STREAMING |
+			    V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VBI_CAPTURE |
+			    V4L2_CAP_DEVICE_CAPS;
+	if (core->board.tuner_type != UNSET)
+		cap->capabilities |= V4L2_CAP_TUNER;
+	if (core->board.radio.type == CX88_RADIO)
+		cap->capabilities |= V4L2_CAP_RADIO;
+	return 0;
+}
+EXPORT_SYMBOL(cx88_querycap);
+
+static int vidioc_querycap(struct file *file, void  *priv,
+			   struct v4l2_capability *cap)
+{
+	struct cx8800_dev *dev = video_drvdata(file);
+	struct cx88_core *core = dev->core;
+
+	strscpy(cap->driver, "cx8800", sizeof(cap->driver));
+	return cx88_querycap(file, core, cap);
+}
+
+static int vidioc_enum_fmt_vid_cap(struct file *file, void  *priv,
+				   struct v4l2_fmtdesc *f)
+{
+	if (unlikely(f->index >= ARRAY_SIZE(formats)))
+		return -EINVAL;
+
+	f->pixelformat = formats[f->index].fourcc;
+
+	return 0;
+}
+
+static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *tvnorm)
+{
+	struct cx8800_dev *dev = video_drvdata(file);
+	struct cx88_core *core = dev->core;
+
+	*tvnorm = core->tvnorm;
+	return 0;
+}
+
+static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id tvnorms)
+{
+	struct cx8800_dev *dev = video_drvdata(file);
+	struct cx88_core *core = dev->core;
+
+	return cx88_set_tvnorm(core, tvnorms);
+}
+
+/* only one input in this sample driver */
+int cx88_enum_input(struct cx88_core  *core, struct v4l2_input *i)
+{
+	static const char * const iname[] = {
+		[CX88_VMUX_COMPOSITE1] = "Composite1",
+		[CX88_VMUX_COMPOSITE2] = "Composite2",
+		[CX88_VMUX_COMPOSITE3] = "Composite3",
+		[CX88_VMUX_COMPOSITE4] = "Composite4",
+		[CX88_VMUX_SVIDEO] = "S-Video",
+		[CX88_VMUX_TELEVISION] = "Television",
+		[CX88_VMUX_CABLE] = "Cable TV",
+		[CX88_VMUX_DVB] = "DVB",
+		[CX88_VMUX_DEBUG] = "for debug only",
+	};
+	unsigned int n = i->index;
+
+	if (n >= 4)
+		return -EINVAL;
+	if (!INPUT(n).type)
+		return -EINVAL;
+	i->type  = V4L2_INPUT_TYPE_CAMERA;
+	strscpy(i->name, iname[INPUT(n).type], sizeof(i->name));
+	if ((INPUT(n).type == CX88_VMUX_TELEVISION) ||
+	    (INPUT(n).type == CX88_VMUX_CABLE))
+		i->type = V4L2_INPUT_TYPE_TUNER;
+
+	i->std = CX88_NORMS;
+	return 0;
+}
+EXPORT_SYMBOL(cx88_enum_input);
+
+static int vidioc_enum_input(struct file *file, void *priv,
+			     struct v4l2_input *i)
+{
+	struct cx8800_dev *dev = video_drvdata(file);
+	struct cx88_core *core = dev->core;
+
+	return cx88_enum_input(core, i);
+}
+
+static int vidioc_g_input(struct file *file, void *priv, unsigned int *i)
+{
+	struct cx8800_dev *dev = video_drvdata(file);
+	struct cx88_core *core = dev->core;
+
+	*i = core->input;
+	return 0;
+}
+
+static int vidioc_s_input(struct file *file, void *priv, unsigned int i)
+{
+	struct cx8800_dev *dev = video_drvdata(file);
+	struct cx88_core *core = dev->core;
+
+	if (i >= 4)
+		return -EINVAL;
+	if (!INPUT(i).type)
+		return -EINVAL;
+
+	cx88_newstation(core);
+	cx88_video_mux(core, i);
+	return 0;
+}
+
+static int vidioc_g_tuner(struct file *file, void *priv,
+			  struct v4l2_tuner *t)
+{
+	struct cx8800_dev *dev = video_drvdata(file);
+	struct cx88_core *core = dev->core;
+	u32 reg;
+
+	if (unlikely(core->board.tuner_type == UNSET))
+		return -EINVAL;
+	if (t->index != 0)
+		return -EINVAL;
+
+	strscpy(t->name, "Television", sizeof(t->name));
+	t->capability = V4L2_TUNER_CAP_NORM;
+	t->rangehigh  = 0xffffffffUL;
+	call_all(core, tuner, g_tuner, t);
+
+	cx88_get_stereo(core, t);
+	reg = cx_read(MO_DEVICE_STATUS);
+	t->signal = (reg & (1 << 5)) ? 0xffff : 0x0000;
+	return 0;
+}
+
+static int vidioc_s_tuner(struct file *file, void *priv,
+			  const struct v4l2_tuner *t)
+{
+	struct cx8800_dev *dev = video_drvdata(file);
+	struct cx88_core *core = dev->core;
+
+	if (core->board.tuner_type == UNSET)
+		return -EINVAL;
+	if (t->index != 0)
+		return -EINVAL;
+
+	cx88_set_stereo(core, t->audmode, 1);
+	return 0;
+}
+
+static int vidioc_g_frequency(struct file *file, void *priv,
+			      struct v4l2_frequency *f)
+{
+	struct cx8800_dev *dev = video_drvdata(file);
+	struct cx88_core *core = dev->core;
+
+	if (unlikely(core->board.tuner_type == UNSET))
+		return -EINVAL;
+	if (f->tuner)
+		return -EINVAL;
+
+	f->frequency = core->freq;
+
+	call_all(core, tuner, g_frequency, f);
+
+	return 0;
+}
+
+int cx88_set_freq(struct cx88_core  *core,
+		  const struct v4l2_frequency *f)
+{
+	struct v4l2_frequency new_freq = *f;
+
+	if (unlikely(core->board.tuner_type == UNSET))
+		return -EINVAL;
+	if (unlikely(f->tuner != 0))
+		return -EINVAL;
+
+	cx88_newstation(core);
+	call_all(core, tuner, s_frequency, f);
+	call_all(core, tuner, g_frequency, &new_freq);
+	core->freq = new_freq.frequency;
+
+	/* When changing channels it is required to reset TVAUDIO */
+	usleep_range(10000, 20000);
+	cx88_set_tvaudio(core);
+
+	return 0;
+}
+EXPORT_SYMBOL(cx88_set_freq);
+
+static int vidioc_s_frequency(struct file *file, void *priv,
+			      const struct v4l2_frequency *f)
+{
+	struct cx8800_dev *dev = video_drvdata(file);
+	struct cx88_core *core = dev->core;
+
+	return cx88_set_freq(core, f);
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int vidioc_g_register(struct file *file, void *fh,
+			     struct v4l2_dbg_register *reg)
+{
+	struct cx8800_dev *dev = video_drvdata(file);
+	struct cx88_core *core = dev->core;
+
+	/* cx2388x has a 24-bit register space */
+	reg->val = cx_read(reg->reg & 0xfffffc);
+	reg->size = 4;
+	return 0;
+}
+
+static int vidioc_s_register(struct file *file, void *fh,
+			     const struct v4l2_dbg_register *reg)
+{
+	struct cx8800_dev *dev = video_drvdata(file);
+	struct cx88_core *core = dev->core;
+
+	cx_write(reg->reg & 0xfffffc, reg->val);
+	return 0;
+}
+#endif
+
+/* ----------------------------------------------------------- */
+/* RADIO ESPECIFIC IOCTLS                                      */
+/* ----------------------------------------------------------- */
+
+static int radio_g_tuner(struct file *file, void *priv,
+			 struct v4l2_tuner *t)
+{
+	struct cx8800_dev *dev = video_drvdata(file);
+	struct cx88_core *core = dev->core;
+
+	if (unlikely(t->index > 0))
+		return -EINVAL;
+
+	strscpy(t->name, "Radio", sizeof(t->name));
+
+	call_all(core, tuner, g_tuner, t);
+	return 0;
+}
+
+static int radio_s_tuner(struct file *file, void *priv,
+			 const struct v4l2_tuner *t)
+{
+	struct cx8800_dev *dev = video_drvdata(file);
+	struct cx88_core *core = dev->core;
+
+	if (t->index != 0)
+		return -EINVAL;
+
+	call_all(core, tuner, s_tuner, t);
+	return 0;
+}
+
+/* ----------------------------------------------------------- */
+
+static const char *cx88_vid_irqs[32] = {
+	"y_risci1", "u_risci1", "v_risci1", "vbi_risc1",
+	"y_risci2", "u_risci2", "v_risci2", "vbi_risc2",
+	"y_oflow",  "u_oflow",  "v_oflow",  "vbi_oflow",
+	"y_sync",   "u_sync",   "v_sync",   "vbi_sync",
+	"opc_err",  "par_err",  "rip_err",  "pci_abort",
+};
+
+static void cx8800_vid_irq(struct cx8800_dev *dev)
+{
+	struct cx88_core *core = dev->core;
+	u32 status, mask, count;
+
+	status = cx_read(MO_VID_INTSTAT);
+	mask   = cx_read(MO_VID_INTMSK);
+	if (0 == (status & mask))
+		return;
+	cx_write(MO_VID_INTSTAT, status);
+	if (irq_debug  ||  (status & mask & ~0xff))
+		cx88_print_irqbits("irq vid",
+				   cx88_vid_irqs, ARRAY_SIZE(cx88_vid_irqs),
+				   status, mask);
+
+	/* risc op code error */
+	if (status & (1 << 16)) {
+		pr_warn("video risc op code error\n");
+		cx_clear(MO_VID_DMACNTRL, 0x11);
+		cx_clear(VID_CAPTURE_CONTROL, 0x06);
+		cx88_sram_channel_dump(core, &cx88_sram_channels[SRAM_CH21]);
+	}
+
+	/* risc1 y */
+	if (status & 0x01) {
+		spin_lock(&dev->slock);
+		count = cx_read(MO_VIDY_GPCNT);
+		cx88_wakeup(core, &dev->vidq, count);
+		spin_unlock(&dev->slock);
+	}
+
+	/* risc1 vbi */
+	if (status & 0x08) {
+		spin_lock(&dev->slock);
+		count = cx_read(MO_VBI_GPCNT);
+		cx88_wakeup(core, &dev->vbiq, count);
+		spin_unlock(&dev->slock);
+	}
+}
+
+static irqreturn_t cx8800_irq(int irq, void *dev_id)
+{
+	struct cx8800_dev *dev = dev_id;
+	struct cx88_core *core = dev->core;
+	u32 status;
+	int loop, handled = 0;
+
+	for (loop = 0; loop < 10; loop++) {
+		status = cx_read(MO_PCI_INTSTAT) &
+			(core->pci_irqmask | PCI_INT_VIDINT);
+		if (status == 0)
+			goto out;
+		cx_write(MO_PCI_INTSTAT, status);
+		handled = 1;
+
+		if (status & core->pci_irqmask)
+			cx88_core_irq(core, status);
+		if (status & PCI_INT_VIDINT)
+			cx8800_vid_irq(dev);
+	}
+	if (loop == 10) {
+		pr_warn("irq loop -- clearing mask\n");
+		cx_write(MO_PCI_INTMSK, 0);
+	}
+
+ out:
+	return IRQ_RETVAL(handled);
+}
+
+/* ----------------------------------------------------------- */
+/* exported stuff                                              */
+
+static const struct v4l2_file_operations video_fops = {
+	.owner	       = THIS_MODULE,
+	.open	       = v4l2_fh_open,
+	.release       = vb2_fop_release,
+	.read	       = vb2_fop_read,
+	.poll          = vb2_fop_poll,
+	.mmap	       = vb2_fop_mmap,
+	.unlocked_ioctl = video_ioctl2,
+};
+
+static const struct v4l2_ioctl_ops video_ioctl_ops = {
+	.vidioc_querycap      = vidioc_querycap,
+	.vidioc_enum_fmt_vid_cap  = vidioc_enum_fmt_vid_cap,
+	.vidioc_g_fmt_vid_cap     = vidioc_g_fmt_vid_cap,
+	.vidioc_try_fmt_vid_cap   = vidioc_try_fmt_vid_cap,
+	.vidioc_s_fmt_vid_cap     = vidioc_s_fmt_vid_cap,
+	.vidioc_reqbufs       = vb2_ioctl_reqbufs,
+	.vidioc_querybuf      = vb2_ioctl_querybuf,
+	.vidioc_qbuf          = vb2_ioctl_qbuf,
+	.vidioc_dqbuf         = vb2_ioctl_dqbuf,
+	.vidioc_g_std         = vidioc_g_std,
+	.vidioc_s_std         = vidioc_s_std,
+	.vidioc_enum_input    = vidioc_enum_input,
+	.vidioc_g_input       = vidioc_g_input,
+	.vidioc_s_input       = vidioc_s_input,
+	.vidioc_streamon      = vb2_ioctl_streamon,
+	.vidioc_streamoff     = vb2_ioctl_streamoff,
+	.vidioc_g_tuner       = vidioc_g_tuner,
+	.vidioc_s_tuner       = vidioc_s_tuner,
+	.vidioc_g_frequency   = vidioc_g_frequency,
+	.vidioc_s_frequency   = vidioc_s_frequency,
+	.vidioc_subscribe_event      = v4l2_ctrl_subscribe_event,
+	.vidioc_unsubscribe_event    = v4l2_event_unsubscribe,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.vidioc_g_register    = vidioc_g_register,
+	.vidioc_s_register    = vidioc_s_register,
+#endif
+};
+
+static const struct video_device cx8800_video_template = {
+	.name                 = "cx8800-video",
+	.fops                 = &video_fops,
+	.ioctl_ops	      = &video_ioctl_ops,
+	.tvnorms              = CX88_NORMS,
+};
+
+static const struct v4l2_ioctl_ops vbi_ioctl_ops = {
+	.vidioc_querycap      = vidioc_querycap,
+	.vidioc_g_fmt_vbi_cap     = cx8800_vbi_fmt,
+	.vidioc_try_fmt_vbi_cap   = cx8800_vbi_fmt,
+	.vidioc_s_fmt_vbi_cap     = cx8800_vbi_fmt,
+	.vidioc_reqbufs       = vb2_ioctl_reqbufs,
+	.vidioc_querybuf      = vb2_ioctl_querybuf,
+	.vidioc_qbuf          = vb2_ioctl_qbuf,
+	.vidioc_dqbuf         = vb2_ioctl_dqbuf,
+	.vidioc_g_std         = vidioc_g_std,
+	.vidioc_s_std         = vidioc_s_std,
+	.vidioc_enum_input    = vidioc_enum_input,
+	.vidioc_g_input       = vidioc_g_input,
+	.vidioc_s_input       = vidioc_s_input,
+	.vidioc_streamon      = vb2_ioctl_streamon,
+	.vidioc_streamoff     = vb2_ioctl_streamoff,
+	.vidioc_g_tuner       = vidioc_g_tuner,
+	.vidioc_s_tuner       = vidioc_s_tuner,
+	.vidioc_g_frequency   = vidioc_g_frequency,
+	.vidioc_s_frequency   = vidioc_s_frequency,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.vidioc_g_register    = vidioc_g_register,
+	.vidioc_s_register    = vidioc_s_register,
+#endif
+};
+
+static const struct video_device cx8800_vbi_template = {
+	.name                 = "cx8800-vbi",
+	.fops                 = &video_fops,
+	.ioctl_ops	      = &vbi_ioctl_ops,
+	.tvnorms              = CX88_NORMS,
+};
+
+static const struct v4l2_file_operations radio_fops = {
+	.owner         = THIS_MODULE,
+	.open          = radio_open,
+	.poll          = v4l2_ctrl_poll,
+	.release       = v4l2_fh_release,
+	.unlocked_ioctl = video_ioctl2,
+};
+
+static const struct v4l2_ioctl_ops radio_ioctl_ops = {
+	.vidioc_querycap      = vidioc_querycap,
+	.vidioc_g_tuner       = radio_g_tuner,
+	.vidioc_s_tuner       = radio_s_tuner,
+	.vidioc_g_frequency   = vidioc_g_frequency,
+	.vidioc_s_frequency   = vidioc_s_frequency,
+	.vidioc_subscribe_event      = v4l2_ctrl_subscribe_event,
+	.vidioc_unsubscribe_event    = v4l2_event_unsubscribe,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.vidioc_g_register    = vidioc_g_register,
+	.vidioc_s_register    = vidioc_s_register,
+#endif
+};
+
+static const struct video_device cx8800_radio_template = {
+	.name                 = "cx8800-radio",
+	.fops                 = &radio_fops,
+	.ioctl_ops	      = &radio_ioctl_ops,
+};
+
+static const struct v4l2_ctrl_ops cx8800_ctrl_vid_ops = {
+	.s_ctrl = cx8800_s_vid_ctrl,
+};
+
+static const struct v4l2_ctrl_ops cx8800_ctrl_aud_ops = {
+	.s_ctrl = cx8800_s_aud_ctrl,
+};
+
+/* ----------------------------------------------------------- */
+
+static void cx8800_unregister_video(struct cx8800_dev *dev)
+{
+	video_unregister_device(&dev->radio_dev);
+	video_unregister_device(&dev->vbi_dev);
+	video_unregister_device(&dev->video_dev);
+}
+
+static int cx8800_initdev(struct pci_dev *pci_dev,
+			  const struct pci_device_id *pci_id)
+{
+	struct cx8800_dev *dev;
+	struct cx88_core *core;
+	struct vb2_queue *q;
+	int err;
+	int i;
+
+	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
+	/* pci init */
+	dev->pci = pci_dev;
+	if (pci_enable_device(pci_dev)) {
+		err = -EIO;
+		goto fail_free;
+	}
+	core = cx88_core_get(dev->pci);
+	if (!core) {
+		err = -EINVAL;
+		goto fail_disable;
+	}
+	dev->core = core;
+
+	/* print pci info */
+	dev->pci_rev = pci_dev->revision;
+	pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER,  &dev->pci_lat);
+	pr_info("found at %s, rev: %d, irq: %d, latency: %d, mmio: 0x%llx\n",
+		pci_name(pci_dev), dev->pci_rev, pci_dev->irq,
+		dev->pci_lat,
+		(unsigned long long)pci_resource_start(pci_dev, 0));
+
+	pci_set_master(pci_dev);
+	err = dma_set_mask(&pci_dev->dev, DMA_BIT_MASK(32));
+	if (err) {
+		pr_err("Oops: no 32bit PCI DMA ???\n");
+		goto fail_core;
+	}
+
+	/* initialize driver struct */
+	spin_lock_init(&dev->slock);
+
+	/* init video dma queues */
+	INIT_LIST_HEAD(&dev->vidq.active);
+
+	/* init vbi dma queues */
+	INIT_LIST_HEAD(&dev->vbiq.active);
+
+	/* get irq */
+	err = request_irq(pci_dev->irq, cx8800_irq,
+			  IRQF_SHARED, core->name, dev);
+	if (err < 0) {
+		pr_err("can't get IRQ %d\n", pci_dev->irq);
+		goto fail_core;
+	}
+	cx_set(MO_PCI_INTMSK, core->pci_irqmask);
+
+	for (i = 0; i < CX8800_AUD_CTLS; i++) {
+		const struct cx88_ctrl *cc = &cx8800_aud_ctls[i];
+		struct v4l2_ctrl *vc;
+
+		vc = v4l2_ctrl_new_std(&core->audio_hdl, &cx8800_ctrl_aud_ops,
+				       cc->id, cc->minimum, cc->maximum,
+				       cc->step, cc->default_value);
+		if (!vc) {
+			err = core->audio_hdl.error;
+			goto fail_irq;
+		}
+		vc->priv = (void *)cc;
+	}
+
+	for (i = 0; i < CX8800_VID_CTLS; i++) {
+		const struct cx88_ctrl *cc = &cx8800_vid_ctls[i];
+		struct v4l2_ctrl *vc;
+
+		vc = v4l2_ctrl_new_std(&core->video_hdl, &cx8800_ctrl_vid_ops,
+				       cc->id, cc->minimum, cc->maximum,
+				       cc->step, cc->default_value);
+		if (!vc) {
+			err = core->video_hdl.error;
+			goto fail_irq;
+		}
+		vc->priv = (void *)cc;
+		if (vc->id == V4L2_CID_CHROMA_AGC)
+			core->chroma_agc = vc;
+	}
+	v4l2_ctrl_add_handler(&core->video_hdl, &core->audio_hdl, NULL, false);
+
+	/* load and configure helper modules */
+
+	if (core->board.audio_chip == CX88_AUDIO_WM8775) {
+		struct i2c_board_info wm8775_info = {
+			.type = "wm8775",
+			.addr = 0x36 >> 1,
+			.platform_data = &core->wm8775_data,
+		};
+		struct v4l2_subdev *sd;
+
+		if (core->boardnr == CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1)
+			core->wm8775_data.is_nova_s = true;
+		else
+			core->wm8775_data.is_nova_s = false;
+
+		sd = v4l2_i2c_new_subdev_board(&core->v4l2_dev, &core->i2c_adap,
+					       &wm8775_info, NULL);
+		if (sd) {
+			core->sd_wm8775 = sd;
+			sd->grp_id = WM8775_GID;
+		}
+	}
+
+	if (core->board.audio_chip == CX88_AUDIO_TVAUDIO) {
+		/*
+		 * This probes for a tda9874 as is used on some
+		 * Pixelview Ultra boards.
+		 */
+		v4l2_i2c_new_subdev(&core->v4l2_dev, &core->i2c_adap,
+				    "tvaudio", 0, I2C_ADDRS(0xb0 >> 1));
+	}
+
+	switch (core->boardnr) {
+	case CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD:
+	case CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD: {
+		static const struct i2c_board_info rtc_info = {
+			I2C_BOARD_INFO("isl1208", 0x6f)
+		};
+
+		request_module("rtc-isl1208");
+		core->i2c_rtc = i2c_new_client_device(&core->i2c_adap, &rtc_info);
+	}
+		fallthrough;
+	case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
+	case CX88_BOARD_NOTONLYTV_LV3H:
+		request_module("ir-kbd-i2c");
+	}
+
+	/* Sets device info at pci_dev */
+	pci_set_drvdata(pci_dev, dev);
+
+	dev->fmt = format_by_fourcc(V4L2_PIX_FMT_BGR24);
+
+	/* Maintain a reference so cx88-blackbird can query the 8800 device. */
+	core->v4ldev = dev;
+
+	/* initial device configuration */
+	mutex_lock(&core->lock);
+	cx88_set_tvnorm(core, V4L2_STD_NTSC_M);
+	v4l2_ctrl_handler_setup(&core->video_hdl);
+	v4l2_ctrl_handler_setup(&core->audio_hdl);
+	cx88_video_mux(core, 0);
+
+	q = &dev->vb2_vidq;
+	q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+	q->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF | VB2_READ;
+	q->gfp_flags = GFP_DMA32;
+	q->min_buffers_needed = 2;
+	q->drv_priv = dev;
+	q->buf_struct_size = sizeof(struct cx88_buffer);
+	q->ops = &cx8800_video_qops;
+	q->mem_ops = &vb2_dma_sg_memops;
+	q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+	q->lock = &core->lock;
+	q->dev = &dev->pci->dev;
+
+	err = vb2_queue_init(q);
+	if (err < 0)
+		goto fail_unreg;
+
+	q = &dev->vb2_vbiq;
+	q->type = V4L2_BUF_TYPE_VBI_CAPTURE;
+	q->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF | VB2_READ;
+	q->gfp_flags = GFP_DMA32;
+	q->min_buffers_needed = 2;
+	q->drv_priv = dev;
+	q->buf_struct_size = sizeof(struct cx88_buffer);
+	q->ops = &cx8800_vbi_qops;
+	q->mem_ops = &vb2_dma_sg_memops;
+	q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+	q->lock = &core->lock;
+	q->dev = &dev->pci->dev;
+
+	err = vb2_queue_init(q);
+	if (err < 0)
+		goto fail_unreg;
+
+	/* register v4l devices */
+	cx88_vdev_init(core, dev->pci, &dev->video_dev,
+		       &cx8800_video_template, "video");
+	video_set_drvdata(&dev->video_dev, dev);
+	dev->video_dev.ctrl_handler = &core->video_hdl;
+	dev->video_dev.queue = &dev->vb2_vidq;
+	dev->video_dev.device_caps = V4L2_CAP_READWRITE | V4L2_CAP_STREAMING |
+				     V4L2_CAP_VIDEO_CAPTURE;
+	if (core->board.tuner_type != UNSET)
+		dev->video_dev.device_caps |= V4L2_CAP_TUNER;
+	err = video_register_device(&dev->video_dev, VFL_TYPE_VIDEO,
+				    video_nr[core->nr]);
+	if (err < 0) {
+		pr_err("can't register video device\n");
+		goto fail_unreg;
+	}
+	pr_info("registered device %s [v4l2]\n",
+		video_device_node_name(&dev->video_dev));
+
+	cx88_vdev_init(core, dev->pci, &dev->vbi_dev,
+		       &cx8800_vbi_template, "vbi");
+	video_set_drvdata(&dev->vbi_dev, dev);
+	dev->vbi_dev.queue = &dev->vb2_vbiq;
+	dev->vbi_dev.device_caps = V4L2_CAP_READWRITE | V4L2_CAP_STREAMING |
+				   V4L2_CAP_VBI_CAPTURE;
+	if (core->board.tuner_type != UNSET)
+		dev->vbi_dev.device_caps |= V4L2_CAP_TUNER;
+	err = video_register_device(&dev->vbi_dev, VFL_TYPE_VBI,
+				    vbi_nr[core->nr]);
+	if (err < 0) {
+		pr_err("can't register vbi device\n");
+		goto fail_unreg;
+	}
+	pr_info("registered device %s\n",
+		video_device_node_name(&dev->vbi_dev));
+
+	if (core->board.radio.type == CX88_RADIO) {
+		cx88_vdev_init(core, dev->pci, &dev->radio_dev,
+			       &cx8800_radio_template, "radio");
+		video_set_drvdata(&dev->radio_dev, dev);
+		dev->radio_dev.ctrl_handler = &core->audio_hdl;
+		dev->radio_dev.device_caps = V4L2_CAP_RADIO | V4L2_CAP_TUNER;
+		err = video_register_device(&dev->radio_dev, VFL_TYPE_RADIO,
+					    radio_nr[core->nr]);
+		if (err < 0) {
+			pr_err("can't register radio device\n");
+			goto fail_unreg;
+		}
+		pr_info("registered device %s\n",
+			video_device_node_name(&dev->radio_dev));
+	}
+
+	/* start tvaudio thread */
+	if (core->board.tuner_type != UNSET) {
+		core->kthread = kthread_run(cx88_audio_thread,
+					    core, "cx88 tvaudio");
+		if (IS_ERR(core->kthread)) {
+			err = PTR_ERR(core->kthread);
+			pr_err("failed to create cx88 audio thread, err=%d\n",
+			       err);
+		}
+	}
+	mutex_unlock(&core->lock);
+
+	return 0;
+
+fail_unreg:
+	cx8800_unregister_video(dev);
+	mutex_unlock(&core->lock);
+fail_irq:
+	free_irq(pci_dev->irq, dev);
+fail_core:
+	core->v4ldev = NULL;
+	cx88_core_put(core, dev->pci);
+fail_disable:
+	pci_disable_device(pci_dev);
+fail_free:
+	kfree(dev);
+	return err;
+}
+
+static void cx8800_finidev(struct pci_dev *pci_dev)
+{
+	struct cx8800_dev *dev = pci_get_drvdata(pci_dev);
+	struct cx88_core *core = dev->core;
+
+	/* stop thread */
+	if (core->kthread) {
+		kthread_stop(core->kthread);
+		core->kthread = NULL;
+	}
+
+	if (core->ir)
+		cx88_ir_stop(core);
+
+	cx88_shutdown(core); /* FIXME */
+
+	/* unregister stuff */
+
+	free_irq(pci_dev->irq, dev);
+	cx8800_unregister_video(dev);
+	pci_disable_device(pci_dev);
+
+	core->v4ldev = NULL;
+
+	/* free memory */
+	cx88_core_put(core, dev->pci);
+	kfree(dev);
+}
+
+static int __maybe_unused cx8800_suspend(struct device *dev_d)
+{
+	struct cx8800_dev *dev = dev_get_drvdata(dev_d);
+	struct cx88_core *core = dev->core;
+	unsigned long flags;
+
+	/* stop video+vbi capture */
+	spin_lock_irqsave(&dev->slock, flags);
+	if (!list_empty(&dev->vidq.active)) {
+		pr_info("suspend video\n");
+		stop_video_dma(dev);
+	}
+	if (!list_empty(&dev->vbiq.active)) {
+		pr_info("suspend vbi\n");
+		cx8800_stop_vbi_dma(dev);
+	}
+	spin_unlock_irqrestore(&dev->slock, flags);
+
+	if (core->ir)
+		cx88_ir_stop(core);
+	/* FIXME -- shutdown device */
+	cx88_shutdown(core);
+
+	dev->state.disabled = 1;
+	return 0;
+}
+
+static int __maybe_unused cx8800_resume(struct device *dev_d)
+{
+	struct cx8800_dev *dev = dev_get_drvdata(dev_d);
+	struct cx88_core *core = dev->core;
+	unsigned long flags;
+
+	dev->state.disabled = 0;
+
+	/* FIXME: re-initialize hardware */
+	cx88_reset(core);
+	if (core->ir)
+		cx88_ir_start(core);
+
+	cx_set(MO_PCI_INTMSK, core->pci_irqmask);
+
+	/* restart video+vbi capture */
+	spin_lock_irqsave(&dev->slock, flags);
+	if (!list_empty(&dev->vidq.active)) {
+		pr_info("resume video\n");
+		restart_video_queue(dev, &dev->vidq);
+	}
+	if (!list_empty(&dev->vbiq.active)) {
+		pr_info("resume vbi\n");
+		cx8800_restart_vbi_queue(dev, &dev->vbiq);
+	}
+	spin_unlock_irqrestore(&dev->slock, flags);
+
+	return 0;
+}
+
+/* ----------------------------------------------------------- */
+
+static const struct pci_device_id cx8800_pci_tbl[] = {
+	{
+		.vendor       = 0x14f1,
+		.device       = 0x8800,
+		.subvendor    = PCI_ANY_ID,
+		.subdevice    = PCI_ANY_ID,
+	}, {
+		/* --- end of list --- */
+	}
+};
+MODULE_DEVICE_TABLE(pci, cx8800_pci_tbl);
+
+static SIMPLE_DEV_PM_OPS(cx8800_pm_ops, cx8800_suspend, cx8800_resume);
+
+static struct pci_driver cx8800_pci_driver = {
+	.name      = "cx8800",
+	.id_table  = cx8800_pci_tbl,
+	.probe     = cx8800_initdev,
+	.remove    = cx8800_finidev,
+	.driver.pm = &cx8800_pm_ops,
+};
+
+module_pci_driver(cx8800_pci_driver);
diff --git a/drivers/media/pci/cx88/cx88-vp3054-i2c.c b/drivers/media/pci/cx88/cx88-vp3054-i2c.c
new file mode 100644
index 000000000..ac7f76dc5
--- /dev/null
+++ b/drivers/media/pci/cx88/cx88-vp3054-i2c.c
@@ -0,0 +1,141 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * cx88-vp3054-i2c.c -- support for the secondary I2C bus of the
+ *			DNTV Live! DVB-T Pro (VP-3054), wired as:
+ *			GPIO[0] -> SCL, GPIO[1] -> SDA
+ *
+ * (c) 2005 Chris Pascoe <c.pascoe@itee.uq.edu.au>
+ */
+
+#include "cx88.h"
+#include "cx88-vp3054-i2c.h"
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+MODULE_DESCRIPTION("driver for cx2388x VP3054 design");
+MODULE_AUTHOR("Chris Pascoe <c.pascoe@itee.uq.edu.au>");
+MODULE_LICENSE("GPL");
+
+/* ----------------------------------------------------------------------- */
+
+static void vp3054_bit_setscl(void *data, int state)
+{
+	struct cx8802_dev *dev = data;
+	struct cx88_core *core = dev->core;
+	struct vp3054_i2c_state *vp3054_i2c = dev->vp3054;
+
+	if (state) {
+		vp3054_i2c->state |=  0x0001;	/* SCL high */
+		vp3054_i2c->state &= ~0x0100;	/* external pullup */
+	} else {
+		vp3054_i2c->state &= ~0x0001;	/* SCL low */
+		vp3054_i2c->state |=  0x0100;	/* drive pin */
+	}
+	cx_write(MO_GP0_IO, 0x010000 | vp3054_i2c->state);
+	cx_read(MO_GP0_IO);
+}
+
+static void vp3054_bit_setsda(void *data, int state)
+{
+	struct cx8802_dev *dev = data;
+	struct cx88_core *core = dev->core;
+	struct vp3054_i2c_state *vp3054_i2c = dev->vp3054;
+
+	if (state) {
+		vp3054_i2c->state |=  0x0002;	/* SDA high */
+		vp3054_i2c->state &= ~0x0200;	/* tristate pin */
+	} else {
+		vp3054_i2c->state &= ~0x0002;	/* SDA low */
+		vp3054_i2c->state |=  0x0200;	/* drive pin */
+	}
+	cx_write(MO_GP0_IO, 0x020000 | vp3054_i2c->state);
+	cx_read(MO_GP0_IO);
+}
+
+static int vp3054_bit_getscl(void *data)
+{
+	struct cx8802_dev *dev = data;
+	struct cx88_core *core = dev->core;
+	u32 state;
+
+	state = cx_read(MO_GP0_IO);
+	return (state & 0x01) ? 1 : 0;
+}
+
+static int vp3054_bit_getsda(void *data)
+{
+	struct cx8802_dev *dev = data;
+	struct cx88_core *core = dev->core;
+	u32 state;
+
+	state = cx_read(MO_GP0_IO);
+	return (state & 0x02) ? 1 : 0;
+}
+
+/* ----------------------------------------------------------------------- */
+
+static const struct i2c_algo_bit_data vp3054_i2c_algo_template = {
+	.setsda  = vp3054_bit_setsda,
+	.setscl  = vp3054_bit_setscl,
+	.getsda  = vp3054_bit_getsda,
+	.getscl  = vp3054_bit_getscl,
+	.udelay  = 16,
+	.timeout = 200,
+};
+
+/* ----------------------------------------------------------------------- */
+
+int vp3054_i2c_probe(struct cx8802_dev *dev)
+{
+	struct cx88_core *core = dev->core;
+	struct vp3054_i2c_state *vp3054_i2c;
+	int rc;
+
+	if (core->boardnr != CX88_BOARD_DNTV_LIVE_DVB_T_PRO)
+		return 0;
+
+	vp3054_i2c = kzalloc(sizeof(*vp3054_i2c), GFP_KERNEL);
+	if (!vp3054_i2c)
+		return -ENOMEM;
+	dev->vp3054 = vp3054_i2c;
+
+	vp3054_i2c->algo = vp3054_i2c_algo_template;
+
+	vp3054_i2c->adap.dev.parent = &dev->pci->dev;
+	strscpy(vp3054_i2c->adap.name, core->name,
+		sizeof(vp3054_i2c->adap.name));
+	vp3054_i2c->adap.owner = THIS_MODULE;
+	vp3054_i2c->algo.data = dev;
+	i2c_set_adapdata(&vp3054_i2c->adap, dev);
+	vp3054_i2c->adap.algo_data = &vp3054_i2c->algo;
+
+	vp3054_bit_setscl(dev, 1);
+	vp3054_bit_setsda(dev, 1);
+
+	rc = i2c_bit_add_bus(&vp3054_i2c->adap);
+	if (rc != 0) {
+		pr_err("vp3054_i2c register FAILED\n");
+
+		kfree(dev->vp3054);
+		dev->vp3054 = NULL;
+	}
+
+	return rc;
+}
+EXPORT_SYMBOL(vp3054_i2c_probe);
+
+void vp3054_i2c_remove(struct cx8802_dev *dev)
+{
+	struct vp3054_i2c_state *vp3054_i2c = dev->vp3054;
+
+	if (!vp3054_i2c ||
+	    dev->core->boardnr != CX88_BOARD_DNTV_LIVE_DVB_T_PRO)
+		return;
+
+	i2c_del_adapter(&vp3054_i2c->adap);
+	kfree(vp3054_i2c);
+}
+EXPORT_SYMBOL(vp3054_i2c_remove);
diff --git a/drivers/media/pci/cx88/cx88-vp3054-i2c.h b/drivers/media/pci/cx88/cx88-vp3054-i2c.h
new file mode 100644
index 000000000..ead3d0d63
--- /dev/null
+++ b/drivers/media/pci/cx88/cx88-vp3054-i2c.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * cx88-vp3054-i2c.h  --  support for the secondary I2C bus of the
+ *			  DNTV Live! DVB-T Pro (VP-3054), wired as:
+ *			  GPIO[0] -> SCL, GPIO[1] -> SDA
+ *
+ * (c) 2005 Chris Pascoe <c.pascoe@itee.uq.edu.au>
+ */
+
+/* ----------------------------------------------------------------------- */
+struct vp3054_i2c_state {
+	struct i2c_adapter         adap;
+	struct i2c_algo_bit_data   algo;
+	u32                        state;
+};
+
+/* ----------------------------------------------------------------------- */
+#if IS_ENABLED(CONFIG_VIDEO_CX88_VP3054)
+int  vp3054_i2c_probe(struct cx8802_dev *dev);
+void vp3054_i2c_remove(struct cx8802_dev *dev);
+#else
+static inline int  vp3054_i2c_probe(struct cx8802_dev *dev)
+{ return 0; }
+static inline void vp3054_i2c_remove(struct cx8802_dev *dev)
+{ }
+#endif
diff --git a/drivers/media/pci/cx88/cx88.h b/drivers/media/pci/cx88/cx88.h
new file mode 100644
index 000000000..2ff3226a5
--- /dev/null
+++ b/drivers/media/pci/cx88/cx88.h
@@ -0,0 +1,731 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * v4l2 device driver for cx2388x based TV cards
+ *
+ * (c) 2003,04 Gerd Knorr <kraxel@bytesex.org> [SUSE Labs]
+ */
+
+#ifndef CX88_H
+#define CX88_H
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/pci.h>
+#include <linux/i2c.h>
+#include <linux/i2c-algo-bit.h>
+#include <linux/videodev2.h>
+#include <linux/kdev_t.h>
+#include <linux/refcount.h>
+
+#include <media/v4l2-device.h>
+#include <media/v4l2-fh.h>
+#include <media/tuner.h>
+#include <media/tveeprom.h>
+#include <media/videobuf2-dma-sg.h>
+#include <media/drv-intf/cx2341x.h>
+#include <media/videobuf2-dvb.h>
+#include <media/i2c/ir-kbd-i2c.h>
+#include <media/i2c/wm8775.h>
+
+#include "cx88-reg.h"
+#include "xc2028.h"
+
+#include <linux/mutex.h>
+
+#define CX88_VERSION "1.0.0"
+
+#define UNSET (-1U)
+
+#define CX88_MAXBOARDS 8
+
+/* Max number of inputs by card */
+#define MAX_CX88_INPUT 8
+
+/* ----------------------------------------------------------- */
+/* defines and enums                                           */
+
+/* Currently unsupported by the driver: PAL/H, NTSC/Kr, SECAM/LC */
+#define CX88_NORMS (V4L2_STD_ALL		\
+		    & ~V4L2_STD_PAL_H		\
+		    & ~V4L2_STD_NTSC_M_KR	\
+		    & ~V4L2_STD_SECAM_LC)
+
+#define FORMAT_FLAGS_PACKED       0x01
+#define FORMAT_FLAGS_PLANAR       0x02
+
+#define VBI_LINE_PAL_COUNT              18
+#define VBI_LINE_NTSC_COUNT             12
+#define VBI_LINE_LENGTH           2048
+
+#define AUD_RDS_LINES		     4
+
+/* need "shadow" registers for some write-only ones ... */
+#define SHADOW_AUD_VOL_CTL           1
+#define SHADOW_AUD_BAL_CTL           2
+#define SHADOW_MAX                   3
+
+/* FM Radio deemphasis type */
+enum cx88_deemph_type {
+	FM_NO_DEEMPH = 0,
+	FM_DEEMPH_50,
+	FM_DEEMPH_75
+};
+
+enum cx88_board_type {
+	CX88_BOARD_NONE = 0,
+	CX88_MPEG_DVB,
+	CX88_MPEG_BLACKBIRD
+};
+
+enum cx8802_board_access {
+	CX8802_DRVCTL_SHARED    = 1,
+	CX8802_DRVCTL_EXCLUSIVE = 2,
+};
+
+/* ----------------------------------------------------------- */
+/* tv norms                                                    */
+
+static inline unsigned int norm_maxw(v4l2_std_id norm)
+{
+	return 720;
+}
+
+static inline unsigned int norm_maxh(v4l2_std_id norm)
+{
+	return (norm & V4L2_STD_525_60) ? 480 : 576;
+}
+
+/* ----------------------------------------------------------- */
+/* static data                                                 */
+
+struct cx8800_fmt {
+	u32   fourcc;          /* v4l2 format id */
+	int   depth;
+	int   flags;
+	u32   cxformat;
+};
+
+/* ----------------------------------------------------------- */
+/* SRAM memory management data (see cx88-core.c)               */
+
+#define SRAM_CH21 0   /* video */
+#define SRAM_CH22 1
+#define SRAM_CH23 2
+#define SRAM_CH24 3   /* vbi   */
+#define SRAM_CH25 4   /* audio */
+#define SRAM_CH26 5
+#define SRAM_CH28 6   /* mpeg */
+#define SRAM_CH27 7   /* audio rds */
+/* more */
+
+struct sram_channel {
+	const char *name;
+	u32  cmds_start;
+	u32  ctrl_start;
+	u32  cdt;
+	u32  fifo_start;
+	u32  fifo_size;
+	u32  ptr1_reg;
+	u32  ptr2_reg;
+	u32  cnt1_reg;
+	u32  cnt2_reg;
+};
+
+extern const struct sram_channel cx88_sram_channels[];
+
+/* ----------------------------------------------------------- */
+/* card configuration                                          */
+
+#define CX88_BOARD_NOAUTO               UNSET
+#define CX88_BOARD_UNKNOWN                  0
+#define CX88_BOARD_HAUPPAUGE                1
+#define CX88_BOARD_GDI                      2
+#define CX88_BOARD_PIXELVIEW                3
+#define CX88_BOARD_ATI_WONDER_PRO           4
+#define CX88_BOARD_WINFAST2000XP_EXPERT     5
+#define CX88_BOARD_AVERTV_STUDIO_303        6
+#define CX88_BOARD_MSI_TVANYWHERE_MASTER    7
+#define CX88_BOARD_WINFAST_DV2000           8
+#define CX88_BOARD_LEADTEK_PVR2000          9
+#define CX88_BOARD_IODATA_GVVCP3PCI        10
+#define CX88_BOARD_PROLINK_PLAYTVPVR       11
+#define CX88_BOARD_ASUS_PVR_416            12
+#define CX88_BOARD_MSI_TVANYWHERE          13
+#define CX88_BOARD_KWORLD_DVB_T            14
+#define CX88_BOARD_DVICO_FUSIONHDTV_DVB_T1 15
+#define CX88_BOARD_KWORLD_LTV883           16
+#define CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q  17
+#define CX88_BOARD_HAUPPAUGE_DVB_T1        18
+#define CX88_BOARD_CONEXANT_DVB_T1         19
+#define CX88_BOARD_PROVIDEO_PV259          20
+#define CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS 21
+#define CX88_BOARD_PCHDTV_HD3000           22
+#define CX88_BOARD_DNTV_LIVE_DVB_T         23
+#define CX88_BOARD_HAUPPAUGE_ROSLYN        24
+#define CX88_BOARD_DIGITALLOGIC_MEC        25
+#define CX88_BOARD_IODATA_GVBCTV7E         26
+#define CX88_BOARD_PIXELVIEW_PLAYTV_ULTRA_PRO 27
+#define CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T  28
+#define CX88_BOARD_ADSTECH_DVB_T_PCI          29
+#define CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1  30
+#define CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD 31
+#define CX88_BOARD_AVERMEDIA_ULTRATV_MC_550 32
+#define CX88_BOARD_KWORLD_VSTREAM_EXPERT_DVD 33
+#define CX88_BOARD_ATI_HDTVWONDER          34
+#define CX88_BOARD_WINFAST_DTV1000         35
+#define CX88_BOARD_AVERTV_303              36
+#define CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1  37
+#define CX88_BOARD_HAUPPAUGE_NOVASE2_S1    38
+#define CX88_BOARD_KWORLD_DVBS_100         39
+#define CX88_BOARD_HAUPPAUGE_HVR1100       40
+#define CX88_BOARD_HAUPPAUGE_HVR1100LP     41
+#define CX88_BOARD_DNTV_LIVE_DVB_T_PRO     42
+#define CX88_BOARD_KWORLD_DVB_T_CX22702    43
+#define CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL 44
+#define CX88_BOARD_KWORLD_HARDWARE_MPEG_TV_XPERT 45
+#define CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_HYBRID 46
+#define CX88_BOARD_PCHDTV_HD5500           47
+#define CX88_BOARD_KWORLD_MCE200_DELUXE    48
+#define CX88_BOARD_PIXELVIEW_PLAYTV_P7000  49
+#define CX88_BOARD_NPGTECH_REALTV_TOP10FM  50
+#define CX88_BOARD_WINFAST_DTV2000H        51
+#define CX88_BOARD_GENIATECH_DVBS          52
+#define CX88_BOARD_HAUPPAUGE_HVR3000       53
+#define CX88_BOARD_NORWOOD_MICRO           54
+#define CX88_BOARD_TE_DTV_250_OEM_SWANN    55
+#define CX88_BOARD_HAUPPAUGE_HVR1300       56
+#define CX88_BOARD_ADSTECH_PTV_390         57
+#define CX88_BOARD_PINNACLE_PCTV_HD_800i   58
+#define CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO 59
+#define CX88_BOARD_PINNACLE_HYBRID_PCTV    60
+#define CX88_BOARD_WINFAST_TV2000_XP_GLOBAL 61
+#define CX88_BOARD_POWERCOLOR_REAL_ANGEL   62
+#define CX88_BOARD_GENIATECH_X8000_MT      63
+#define CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO 64
+#define CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD 65
+#define CX88_BOARD_PROLINK_PV_8000GT       66
+#define CX88_BOARD_KWORLD_ATSC_120         67
+#define CX88_BOARD_HAUPPAUGE_HVR4000       68
+#define CX88_BOARD_HAUPPAUGE_HVR4000LITE   69
+#define CX88_BOARD_TEVII_S460              70
+#define CX88_BOARD_OMICOM_SS4_PCI          71
+#define CX88_BOARD_TBS_8920                72
+#define CX88_BOARD_TEVII_S420              73
+#define CX88_BOARD_PROLINK_PV_GLOBAL_XTREME 74
+#define CX88_BOARD_PROF_7300               75
+#define CX88_BOARD_SATTRADE_ST4200         76
+#define CX88_BOARD_TBS_8910                77
+#define CX88_BOARD_PROF_6200               78
+#define CX88_BOARD_TERRATEC_CINERGY_HT_PCI_MKII 79
+#define CX88_BOARD_HAUPPAUGE_IRONLY        80
+#define CX88_BOARD_WINFAST_DTV1800H        81
+#define CX88_BOARD_WINFAST_DTV2000H_J      82
+#define CX88_BOARD_PROF_7301               83
+#define CX88_BOARD_SAMSUNG_SMT_7020        84
+#define CX88_BOARD_TWINHAN_VP1027_DVBS     85
+#define CX88_BOARD_TEVII_S464              86
+#define CX88_BOARD_WINFAST_DTV2000H_PLUS   87
+#define CX88_BOARD_WINFAST_DTV1800H_XC4000 88
+#define CX88_BOARD_WINFAST_TV2000_XP_GLOBAL_6F36 89
+#define CX88_BOARD_WINFAST_TV2000_XP_GLOBAL_6F43 90
+#define CX88_BOARD_NOTONLYTV_LV3H          91
+
+enum cx88_itype {
+	CX88_VMUX_COMPOSITE1 = 1,
+	CX88_VMUX_COMPOSITE2,
+	CX88_VMUX_COMPOSITE3,
+	CX88_VMUX_COMPOSITE4,
+	CX88_VMUX_SVIDEO,
+	CX88_VMUX_TELEVISION,
+	CX88_VMUX_CABLE,
+	CX88_VMUX_DVB,
+	CX88_VMUX_DEBUG,
+	CX88_RADIO,
+};
+
+struct cx88_input {
+	enum cx88_itype type;
+	u32             gpio0, gpio1, gpio2, gpio3;
+	unsigned int    vmux:2;
+	unsigned int    audioroute:4;
+};
+
+enum cx88_audio_chip {
+	CX88_AUDIO_WM8775 = 1,
+	CX88_AUDIO_TVAUDIO,
+};
+
+struct cx88_board {
+	const char              *name;
+	unsigned int            tuner_type;
+	unsigned int		radio_type;
+	unsigned char		tuner_addr;
+	unsigned char		radio_addr;
+	int                     tda9887_conf;
+	struct cx88_input       input[MAX_CX88_INPUT];
+	struct cx88_input       radio;
+	enum cx88_board_type    mpeg;
+	enum cx88_audio_chip	audio_chip;
+	int			num_frontends;
+
+	/* Used for I2S devices */
+	int			i2sinputcntl;
+};
+
+struct cx88_subid {
+	u16     subvendor;
+	u16     subdevice;
+	u32     card;
+};
+
+enum cx88_tvaudio {
+	WW_NONE = 1,
+	WW_BTSC,
+	WW_BG,
+	WW_DK,
+	WW_I,
+	WW_L,
+	WW_EIAJ,
+	WW_I2SPT,
+	WW_FM,
+	WW_I2SADC,
+	WW_M
+};
+
+#define INPUT(nr) (core->board.input[nr])
+
+/* ----------------------------------------------------------- */
+/* device / file handle status                                 */
+
+#define RESOURCE_OVERLAY       1
+#define RESOURCE_VIDEO         2
+#define RESOURCE_VBI           4
+
+#define BUFFER_TIMEOUT     msecs_to_jiffies(2000)
+
+struct cx88_riscmem {
+	unsigned int   size;
+	__le32         *cpu;
+	__le32         *jmp;
+	dma_addr_t     dma;
+};
+
+/* buffer for one video frame */
+struct cx88_buffer {
+	/* common v4l buffer stuff -- must be first */
+	struct vb2_v4l2_buffer vb;
+	struct list_head       list;
+
+	/* cx88 specific */
+	unsigned int           bpl;
+	struct cx88_riscmem    risc;
+};
+
+struct cx88_dmaqueue {
+	struct list_head       active;
+	u32                    count;
+};
+
+struct cx8800_dev;
+struct cx8802_dev;
+
+struct cx88_core {
+	struct list_head           devlist;
+	refcount_t		   refcount;
+
+	/* board name */
+	int                        nr;
+	char                       name[32];
+	u32			   model;
+
+	/* pci stuff */
+	int                        pci_bus;
+	int                        pci_slot;
+	u32                        __iomem *lmmio;
+	u8                         __iomem *bmmio;
+	u32                        shadow[SHADOW_MAX];
+	int                        pci_irqmask;
+
+	/* i2c i/o */
+	struct i2c_adapter         i2c_adap;
+	struct i2c_algo_bit_data   i2c_algo;
+	struct i2c_client          i2c_client;
+	u32                        i2c_state, i2c_rc;
+
+	/* config info -- analog */
+	struct v4l2_device	   v4l2_dev;
+	struct v4l2_ctrl_handler   video_hdl;
+	struct v4l2_ctrl	   *chroma_agc;
+	struct v4l2_ctrl_handler   audio_hdl;
+	struct v4l2_subdev	   *sd_wm8775;
+	struct i2c_client	   *i2c_rtc;
+	unsigned int               boardnr;
+	struct cx88_board	   board;
+
+	/* Supported V4L _STD_ tuner formats */
+	unsigned int               tuner_formats;
+
+	/* config info -- dvb */
+#if IS_ENABLED(CONFIG_VIDEO_CX88_DVB)
+	int	(*prev_set_voltage)(struct dvb_frontend *fe,
+				    enum fe_sec_voltage voltage);
+#endif
+	void	(*gate_ctrl)(struct cx88_core *core, int open);
+
+	/* state info */
+	struct task_struct         *kthread;
+	v4l2_std_id                tvnorm;
+	unsigned int		   width, height;
+	unsigned int		   field;
+	enum cx88_tvaudio          tvaudio;
+	u32                        audiomode_manual;
+	u32                        audiomode_current;
+	u32                        input;
+	u32                        last_analog_input;
+	u32                        astat;
+	u32			   use_nicam;
+	unsigned long		   last_change;
+
+	/* IR remote control state */
+	struct cx88_IR             *ir;
+
+	/* I2C remote data */
+	struct IR_i2c_init_data    init_data;
+	struct wm8775_platform_data wm8775_data;
+
+	struct mutex               lock;
+	/* various v4l controls */
+	u32                        freq;
+
+	/*
+	 * cx88-video needs to access cx8802 for hybrid tuner pll access and
+	 * for vb2_is_busy() checks.
+	 */
+	struct cx8802_dev          *dvbdev;
+	/* cx88-blackbird needs to access cx8800 for vb2_is_busy() checks */
+	struct cx8800_dev          *v4ldev;
+	enum cx88_board_type       active_type_id;
+	int			   active_ref;
+	int			   active_fe_id;
+};
+
+static inline struct cx88_core *to_core(struct v4l2_device *v4l2_dev)
+{
+	return container_of(v4l2_dev, struct cx88_core, v4l2_dev);
+}
+
+#define call_hw(core, grpid, o, f, args...) \
+	do {							\
+		if (!core->i2c_rc) {				\
+			if (core->gate_ctrl)			\
+				core->gate_ctrl(core, 1);	\
+			v4l2_device_call_all(&core->v4l2_dev,	\
+					     grpid, o, f, ##args); \
+			if (core->gate_ctrl)			\
+				core->gate_ctrl(core, 0);	\
+		}						\
+	} while (0)
+
+#define call_all(core, o, f, args...) call_hw(core, 0, o, f, ##args)
+
+#define WM8775_GID      (1 << 0)
+
+#define wm8775_s_ctrl(core, id, val) \
+	do {								\
+		struct v4l2_ctrl *ctrl_ =				\
+			v4l2_ctrl_find(core->sd_wm8775->ctrl_handler, id);\
+		if (ctrl_ && !core->i2c_rc) {				\
+			if (core->gate_ctrl)				\
+				core->gate_ctrl(core, 1);		\
+			v4l2_ctrl_s_ctrl(ctrl_, val);			\
+			if (core->gate_ctrl)				\
+				core->gate_ctrl(core, 0);		\
+		}							\
+	} while (0)
+
+#define wm8775_g_ctrl(core, id) \
+	({								\
+		struct v4l2_ctrl *ctrl_ =				\
+			v4l2_ctrl_find(core->sd_wm8775->ctrl_handler, id);\
+		s32 val = 0;						\
+		if (ctrl_ && !core->i2c_rc) {				\
+			if (core->gate_ctrl)				\
+				core->gate_ctrl(core, 1);		\
+			val = v4l2_ctrl_g_ctrl(ctrl_);			\
+			if (core->gate_ctrl)				\
+				core->gate_ctrl(core, 0);		\
+		}							\
+		val;							\
+	})
+
+/* ----------------------------------------------------------- */
+/* function 0: video stuff                                     */
+
+struct cx8800_suspend_state {
+	int                        disabled;
+};
+
+struct cx8800_dev {
+	struct cx88_core           *core;
+	spinlock_t                 slock;
+
+	/* various device info */
+	unsigned int               resources;
+	struct video_device        video_dev;
+	struct video_device        vbi_dev;
+	struct video_device        radio_dev;
+
+	/* pci i/o */
+	struct pci_dev             *pci;
+	unsigned char              pci_rev, pci_lat;
+
+	const struct cx8800_fmt    *fmt;
+
+	/* capture queues */
+	struct cx88_dmaqueue       vidq;
+	struct vb2_queue           vb2_vidq;
+	struct cx88_dmaqueue       vbiq;
+	struct vb2_queue           vb2_vbiq;
+
+	/* various v4l controls */
+
+	/* other global state info */
+	struct cx8800_suspend_state state;
+};
+
+/* ----------------------------------------------------------- */
+/* function 1: audio/alsa stuff                                */
+/* =============> moved to cx88-alsa.c <====================== */
+
+/* ----------------------------------------------------------- */
+/* function 2: mpeg stuff                                      */
+
+struct cx8802_suspend_state {
+	int                        disabled;
+};
+
+struct cx8802_driver {
+	struct cx88_core *core;
+
+	/* List of drivers attached to device */
+	struct list_head drvlist;
+
+	/* Type of driver and access required */
+	enum cx88_board_type type_id;
+	enum cx8802_board_access hw_access;
+
+	/* MPEG 8802 internal only */
+	int (*suspend)(struct pci_dev *pci_dev, pm_message_t state);
+	int (*resume)(struct pci_dev *pci_dev);
+
+	/* Callers to the following functions must hold core->lock */
+
+	/* MPEG 8802 -> mini driver - Driver probe and configuration */
+	int (*probe)(struct cx8802_driver *drv);
+	int (*remove)(struct cx8802_driver *drv);
+
+	/* MPEG 8802 -> mini driver - Access for hardware control */
+	int (*advise_acquire)(struct cx8802_driver *drv);
+	int (*advise_release)(struct cx8802_driver *drv);
+
+	/* MPEG 8802 <- mini driver - Access for hardware control */
+	int (*request_acquire)(struct cx8802_driver *drv);
+	int (*request_release)(struct cx8802_driver *drv);
+};
+
+struct cx8802_dev {
+	struct cx88_core           *core;
+	spinlock_t                 slock;
+
+	/* pci i/o */
+	struct pci_dev             *pci;
+	unsigned char              pci_rev, pci_lat;
+
+	/* dma queues */
+	struct cx88_dmaqueue       mpegq;
+	struct vb2_queue           vb2_mpegq;
+	u32                        ts_packet_size;
+	u32                        ts_packet_count;
+
+	/* other global state info */
+	struct cx8802_suspend_state state;
+
+	/* for blackbird only */
+	struct list_head           devlist;
+#if IS_ENABLED(CONFIG_VIDEO_CX88_BLACKBIRD)
+	struct video_device        mpeg_dev;
+	u32                        mailbox;
+
+	/* mpeg params */
+	struct cx2341x_handler     cxhdl;
+
+#endif
+
+#if IS_ENABLED(CONFIG_VIDEO_CX88_DVB)
+	/* for dvb only */
+	struct vb2_dvb_frontends frontends;
+#endif
+
+#if IS_ENABLED(CONFIG_VIDEO_CX88_VP3054)
+	/* For VP3045 secondary I2C bus support */
+	struct vp3054_i2c_state	   *vp3054;
+#endif
+	/* for switching modulation types */
+	unsigned char              ts_gen_cntrl;
+
+	/* List of attached drivers; must hold core->lock to access */
+	struct list_head	   drvlist;
+
+	struct work_struct	   request_module_wk;
+};
+
+/* ----------------------------------------------------------- */
+
+#define cx_read(reg)             readl(core->lmmio + ((reg) >> 2))
+#define cx_write(reg, value)     writel((value), core->lmmio + ((reg) >> 2))
+#define cx_writeb(reg, value)    writeb((value), core->bmmio + (reg))
+
+#define cx_andor(reg, mask, value) \
+	writel((readl(core->lmmio + ((reg) >> 2)) & ~(mask)) |\
+	((value) & (mask)), core->lmmio + ((reg) >> 2))
+#define cx_set(reg, bit)         cx_andor((reg), (bit), (bit))
+#define cx_clear(reg, bit)       cx_andor((reg), (bit), 0)
+
+#define cx_wait(d) { if (need_resched()) schedule(); else udelay(d); }
+
+/* shadow registers */
+#define cx_sread(sreg)		    (core->shadow[sreg])
+#define cx_swrite(sreg, reg, value) \
+	(core->shadow[sreg] = value, \
+	writel(core->shadow[sreg], core->lmmio + ((reg) >> 2)))
+#define cx_sandor(sreg, reg, mask, value) \
+	(core->shadow[sreg] = (core->shadow[sreg] & ~(mask)) | \
+			       ((value) & (mask)), \
+				writel(core->shadow[sreg], \
+				       core->lmmio + ((reg) >> 2)))
+
+/* ----------------------------------------------------------- */
+/* cx88-core.c                                                 */
+
+extern unsigned int cx88_core_debug;
+
+void cx88_print_irqbits(const char *tag, const char *strings[],
+			int len, u32 bits, u32 mask);
+
+int cx88_core_irq(struct cx88_core *core, u32 status);
+void cx88_wakeup(struct cx88_core *core,
+		 struct cx88_dmaqueue *q, u32 count);
+void cx88_shutdown(struct cx88_core *core);
+int cx88_reset(struct cx88_core *core);
+
+extern int
+cx88_risc_buffer(struct pci_dev *pci, struct cx88_riscmem *risc,
+		 struct scatterlist *sglist,
+		 unsigned int top_offset, unsigned int bottom_offset,
+		 unsigned int bpl, unsigned int padding, unsigned int lines);
+extern int
+cx88_risc_databuffer(struct pci_dev *pci, struct cx88_riscmem *risc,
+		     struct scatterlist *sglist, unsigned int bpl,
+		     unsigned int lines, unsigned int lpi);
+
+void cx88_risc_disasm(struct cx88_core *core,
+		      struct cx88_riscmem *risc);
+int cx88_sram_channel_setup(struct cx88_core *core,
+			    const struct sram_channel *ch,
+			    unsigned int bpl, u32 risc);
+void cx88_sram_channel_dump(struct cx88_core *core,
+			    const struct sram_channel *ch);
+
+int cx88_set_scale(struct cx88_core *core, unsigned int width,
+		   unsigned int height, enum v4l2_field field);
+int cx88_set_tvnorm(struct cx88_core *core, v4l2_std_id norm);
+
+void cx88_vdev_init(struct cx88_core *core,
+		    struct pci_dev *pci,
+		    struct video_device *vfd,
+		    const struct video_device *template_,
+		    const char *type);
+struct cx88_core *cx88_core_get(struct pci_dev *pci);
+void cx88_core_put(struct cx88_core *core,
+		   struct pci_dev *pci);
+
+int cx88_start_audio_dma(struct cx88_core *core);
+int cx88_stop_audio_dma(struct cx88_core *core);
+
+/* ----------------------------------------------------------- */
+/* cx88-vbi.c                                                  */
+
+/* Can be used as g_vbi_fmt, try_vbi_fmt and s_vbi_fmt */
+int cx8800_vbi_fmt(struct file *file, void *priv,
+		   struct v4l2_format *f);
+
+void cx8800_stop_vbi_dma(struct cx8800_dev *dev);
+int cx8800_restart_vbi_queue(struct cx8800_dev *dev, struct cx88_dmaqueue *q);
+
+extern const struct vb2_ops cx8800_vbi_qops;
+
+/* ----------------------------------------------------------- */
+/* cx88-i2c.c                                                  */
+
+int cx88_i2c_init(struct cx88_core *core, struct pci_dev *pci);
+
+/* ----------------------------------------------------------- */
+/* cx88-cards.c                                                */
+
+int cx88_tuner_callback(void *dev, int component, int command, int arg);
+int cx88_get_resources(const struct cx88_core *core,
+		       struct pci_dev *pci);
+struct cx88_core *cx88_core_create(struct pci_dev *pci, int nr);
+void cx88_setup_xc3028(struct cx88_core *core, struct xc2028_ctrl *ctl);
+
+/* ----------------------------------------------------------- */
+/* cx88-tvaudio.c                                              */
+
+void cx88_set_tvaudio(struct cx88_core *core);
+void cx88_newstation(struct cx88_core *core);
+void cx88_get_stereo(struct cx88_core *core, struct v4l2_tuner *t);
+void cx88_set_stereo(struct cx88_core *core, u32 mode, int manual);
+int cx88_audio_thread(void *data);
+
+int cx8802_register_driver(struct cx8802_driver *drv);
+int cx8802_unregister_driver(struct cx8802_driver *drv);
+
+/* Caller must hold core->lock */
+struct cx8802_driver *cx8802_get_driver(struct cx8802_dev *dev,
+					enum cx88_board_type btype);
+
+/* ----------------------------------------------------------- */
+/* cx88-dsp.c                                                  */
+
+s32 cx88_dsp_detect_stereo_sap(struct cx88_core *core);
+
+/* ----------------------------------------------------------- */
+/* cx88-input.c                                                */
+
+int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci);
+int cx88_ir_fini(struct cx88_core *core);
+void cx88_ir_irq(struct cx88_core *core);
+int cx88_ir_start(struct cx88_core *core);
+void cx88_ir_stop(struct cx88_core *core);
+void cx88_i2c_init_ir(struct cx88_core *core);
+
+/* ----------------------------------------------------------- */
+/* cx88-mpeg.c                                                 */
+
+int cx8802_buf_prepare(struct vb2_queue *q, struct cx8802_dev *dev,
+		       struct cx88_buffer *buf);
+void cx8802_buf_queue(struct cx8802_dev *dev, struct cx88_buffer *buf);
+void cx8802_cancel_buffers(struct cx8802_dev *dev);
+int cx8802_start_dma(struct cx8802_dev    *dev,
+		     struct cx88_dmaqueue *q,
+		     struct cx88_buffer   *buf);
+
+/* ----------------------------------------------------------- */
+/* cx88-video.c*/
+int cx88_enum_input(struct cx88_core *core, struct v4l2_input *i);
+int cx88_set_freq(struct cx88_core  *core, const struct v4l2_frequency *f);
+int cx88_video_mux(struct cx88_core *core, unsigned int input);
+int cx88_querycap(struct file *file, struct cx88_core *core,
+		  struct v4l2_capability *cap);
+
+#endif