summaryrefslogtreecommitdiffstats
path: root/drivers/mfd/ucb1x00-core.c
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
commit2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch)
tree848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/mfd/ucb1x00-core.c
parentInitial commit. (diff)
downloadlinux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz
linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip
Adding upstream version 6.1.76.upstream/6.1.76upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/mfd/ucb1x00-core.c')
-rw-r--r--drivers/mfd/ucb1x00-core.c779
1 files changed, 779 insertions, 0 deletions
diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c
new file mode 100644
index 000000000..b690796d2
--- /dev/null
+++ b/drivers/mfd/ucb1x00-core.c
@@ -0,0 +1,779 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * linux/drivers/mfd/ucb1x00-core.c
+ *
+ * Copyright (C) 2001 Russell King, All Rights Reserved.
+ *
+ * The UCB1x00 core driver provides basic services for handling IO,
+ * the ADC, interrupts, and accessing registers. It is designed
+ * such that everything goes through this layer, thereby providing
+ * a consistent locking methodology, as well as allowing the drivers
+ * to be used on other non-MCP-enabled hardware platforms.
+ *
+ * Note that all locks are private to this file. Nothing else may
+ * touch them.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/mfd/ucb1x00.h>
+#include <linux/pm.h>
+#include <linux/gpio/driver.h>
+
+static DEFINE_MUTEX(ucb1x00_mutex);
+static LIST_HEAD(ucb1x00_drivers);
+static LIST_HEAD(ucb1x00_devices);
+
+/**
+ * ucb1x00_io_set_dir - set IO direction
+ * @ucb: UCB1x00 structure describing chip
+ * @in: bitfield of IO pins to be set as inputs
+ * @out: bitfield of IO pins to be set as outputs
+ *
+ * Set the IO direction of the ten general purpose IO pins on
+ * the UCB1x00 chip. The @in bitfield has priority over the
+ * @out bitfield, in that if you specify a pin as both input
+ * and output, it will end up as an input.
+ *
+ * ucb1x00_enable must have been called to enable the comms
+ * before using this function.
+ *
+ * This function takes a spinlock, disabling interrupts.
+ */
+void ucb1x00_io_set_dir(struct ucb1x00 *ucb, unsigned int in, unsigned int out)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ucb->io_lock, flags);
+ ucb->io_dir |= out;
+ ucb->io_dir &= ~in;
+
+ ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
+ spin_unlock_irqrestore(&ucb->io_lock, flags);
+}
+
+/**
+ * ucb1x00_io_write - set or clear IO outputs
+ * @ucb: UCB1x00 structure describing chip
+ * @set: bitfield of IO pins to set to logic '1'
+ * @clear: bitfield of IO pins to set to logic '0'
+ *
+ * Set the IO output state of the specified IO pins. The value
+ * is retained if the pins are subsequently configured as inputs.
+ * The @clear bitfield has priority over the @set bitfield -
+ * outputs will be cleared.
+ *
+ * ucb1x00_enable must have been called to enable the comms
+ * before using this function.
+ *
+ * This function takes a spinlock, disabling interrupts.
+ */
+void ucb1x00_io_write(struct ucb1x00 *ucb, unsigned int set, unsigned int clear)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ucb->io_lock, flags);
+ ucb->io_out |= set;
+ ucb->io_out &= ~clear;
+
+ ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
+ spin_unlock_irqrestore(&ucb->io_lock, flags);
+}
+
+/**
+ * ucb1x00_io_read - read the current state of the IO pins
+ * @ucb: UCB1x00 structure describing chip
+ *
+ * Return a bitfield describing the logic state of the ten
+ * general purpose IO pins.
+ *
+ * ucb1x00_enable must have been called to enable the comms
+ * before using this function.
+ *
+ * This function does not take any mutexes or spinlocks.
+ */
+unsigned int ucb1x00_io_read(struct ucb1x00 *ucb)
+{
+ return ucb1x00_reg_read(ucb, UCB_IO_DATA);
+}
+
+static void ucb1x00_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct ucb1x00 *ucb = gpiochip_get_data(chip);
+ unsigned long flags;
+
+ spin_lock_irqsave(&ucb->io_lock, flags);
+ if (value)
+ ucb->io_out |= 1 << offset;
+ else
+ ucb->io_out &= ~(1 << offset);
+
+ ucb1x00_enable(ucb);
+ ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
+ ucb1x00_disable(ucb);
+ spin_unlock_irqrestore(&ucb->io_lock, flags);
+}
+
+static int ucb1x00_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct ucb1x00 *ucb = gpiochip_get_data(chip);
+ unsigned val;
+
+ ucb1x00_enable(ucb);
+ val = ucb1x00_reg_read(ucb, UCB_IO_DATA);
+ ucb1x00_disable(ucb);
+
+ return !!(val & (1 << offset));
+}
+
+static int ucb1x00_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct ucb1x00 *ucb = gpiochip_get_data(chip);
+ unsigned long flags;
+
+ spin_lock_irqsave(&ucb->io_lock, flags);
+ ucb->io_dir &= ~(1 << offset);
+ ucb1x00_enable(ucb);
+ ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
+ ucb1x00_disable(ucb);
+ spin_unlock_irqrestore(&ucb->io_lock, flags);
+
+ return 0;
+}
+
+static int ucb1x00_gpio_direction_output(struct gpio_chip *chip, unsigned offset
+ , int value)
+{
+ struct ucb1x00 *ucb = gpiochip_get_data(chip);
+ unsigned long flags;
+ unsigned old, mask = 1 << offset;
+
+ spin_lock_irqsave(&ucb->io_lock, flags);
+ old = ucb->io_out;
+ if (value)
+ ucb->io_out |= mask;
+ else
+ ucb->io_out &= ~mask;
+
+ ucb1x00_enable(ucb);
+ if (old != ucb->io_out)
+ ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
+
+ if (!(ucb->io_dir & mask)) {
+ ucb->io_dir |= mask;
+ ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
+ }
+ ucb1x00_disable(ucb);
+ spin_unlock_irqrestore(&ucb->io_lock, flags);
+
+ return 0;
+}
+
+static int ucb1x00_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ struct ucb1x00 *ucb = gpiochip_get_data(chip);
+
+ return ucb->irq_base > 0 ? ucb->irq_base + offset : -ENXIO;
+}
+
+/*
+ * UCB1300 data sheet says we must:
+ * 1. enable ADC => 5us (including reference startup time)
+ * 2. select input => 51*tsibclk => 4.3us
+ * 3. start conversion => 102*tsibclk => 8.5us
+ * (tsibclk = 1/11981000)
+ * Period between SIB 128-bit frames = 10.7us
+ */
+
+/**
+ * ucb1x00_adc_enable - enable the ADC converter
+ * @ucb: UCB1x00 structure describing chip
+ *
+ * Enable the ucb1x00 and ADC converter on the UCB1x00 for use.
+ * Any code wishing to use the ADC converter must call this
+ * function prior to using it.
+ *
+ * This function takes the ADC mutex to prevent two or more
+ * concurrent uses, and therefore may sleep. As a result, it
+ * can only be called from process context, not interrupt
+ * context.
+ *
+ * You should release the ADC as soon as possible using
+ * ucb1x00_adc_disable.
+ */
+void ucb1x00_adc_enable(struct ucb1x00 *ucb)
+{
+ mutex_lock(&ucb->adc_mutex);
+
+ ucb->adc_cr |= UCB_ADC_ENA;
+
+ ucb1x00_enable(ucb);
+ ucb1x00_reg_write(ucb, UCB_ADC_CR, ucb->adc_cr);
+}
+
+/**
+ * ucb1x00_adc_read - read the specified ADC channel
+ * @ucb: UCB1x00 structure describing chip
+ * @adc_channel: ADC channel mask
+ * @sync: wait for syncronisation pulse.
+ *
+ * Start an ADC conversion and wait for the result. Note that
+ * synchronised ADC conversions (via the ADCSYNC pin) must wait
+ * until the trigger is asserted and the conversion is finished.
+ *
+ * This function currently spins waiting for the conversion to
+ * complete (2 frames max without sync).
+ *
+ * If called for a synchronised ADC conversion, it may sleep
+ * with the ADC mutex held.
+ */
+unsigned int ucb1x00_adc_read(struct ucb1x00 *ucb, int adc_channel, int sync)
+{
+ unsigned int val;
+
+ if (sync)
+ adc_channel |= UCB_ADC_SYNC_ENA;
+
+ ucb1x00_reg_write(ucb, UCB_ADC_CR, ucb->adc_cr | adc_channel);
+ ucb1x00_reg_write(ucb, UCB_ADC_CR, ucb->adc_cr | adc_channel | UCB_ADC_START);
+
+ for (;;) {
+ val = ucb1x00_reg_read(ucb, UCB_ADC_DATA);
+ if (val & UCB_ADC_DAT_VAL)
+ break;
+ /* yield to other processes */
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(1);
+ }
+
+ return UCB_ADC_DAT(val);
+}
+
+/**
+ * ucb1x00_adc_disable - disable the ADC converter
+ * @ucb: UCB1x00 structure describing chip
+ *
+ * Disable the ADC converter and release the ADC mutex.
+ */
+void ucb1x00_adc_disable(struct ucb1x00 *ucb)
+{
+ ucb->adc_cr &= ~UCB_ADC_ENA;
+ ucb1x00_reg_write(ucb, UCB_ADC_CR, ucb->adc_cr);
+ ucb1x00_disable(ucb);
+
+ mutex_unlock(&ucb->adc_mutex);
+}
+
+/*
+ * UCB1x00 Interrupt handling.
+ *
+ * The UCB1x00 can generate interrupts when the SIBCLK is stopped.
+ * Since we need to read an internal register, we must re-enable
+ * SIBCLK to talk to the chip. We leave the clock running until
+ * we have finished processing all interrupts from the chip.
+ */
+static void ucb1x00_irq(struct irq_desc *desc)
+{
+ struct ucb1x00 *ucb = irq_desc_get_handler_data(desc);
+ unsigned int isr, i;
+
+ ucb1x00_enable(ucb);
+ isr = ucb1x00_reg_read(ucb, UCB_IE_STATUS);
+ ucb1x00_reg_write(ucb, UCB_IE_CLEAR, isr);
+ ucb1x00_reg_write(ucb, UCB_IE_CLEAR, 0);
+
+ for (i = 0; i < 16 && isr; i++, isr >>= 1)
+ if (isr & 1)
+ generic_handle_irq(ucb->irq_base + i);
+ ucb1x00_disable(ucb);
+}
+
+static void ucb1x00_irq_update(struct ucb1x00 *ucb, unsigned mask)
+{
+ ucb1x00_enable(ucb);
+ if (ucb->irq_ris_enbl & mask)
+ ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl &
+ ucb->irq_mask);
+ if (ucb->irq_fal_enbl & mask)
+ ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl &
+ ucb->irq_mask);
+ ucb1x00_disable(ucb);
+}
+
+static void ucb1x00_irq_noop(struct irq_data *data)
+{
+}
+
+static void ucb1x00_irq_mask(struct irq_data *data)
+{
+ struct ucb1x00 *ucb = irq_data_get_irq_chip_data(data);
+ unsigned mask = 1 << (data->irq - ucb->irq_base);
+
+ raw_spin_lock(&ucb->irq_lock);
+ ucb->irq_mask &= ~mask;
+ ucb1x00_irq_update(ucb, mask);
+ raw_spin_unlock(&ucb->irq_lock);
+}
+
+static void ucb1x00_irq_unmask(struct irq_data *data)
+{
+ struct ucb1x00 *ucb = irq_data_get_irq_chip_data(data);
+ unsigned mask = 1 << (data->irq - ucb->irq_base);
+
+ raw_spin_lock(&ucb->irq_lock);
+ ucb->irq_mask |= mask;
+ ucb1x00_irq_update(ucb, mask);
+ raw_spin_unlock(&ucb->irq_lock);
+}
+
+static int ucb1x00_irq_set_type(struct irq_data *data, unsigned int type)
+{
+ struct ucb1x00 *ucb = irq_data_get_irq_chip_data(data);
+ unsigned mask = 1 << (data->irq - ucb->irq_base);
+
+ raw_spin_lock(&ucb->irq_lock);
+ if (type & IRQ_TYPE_EDGE_RISING)
+ ucb->irq_ris_enbl |= mask;
+ else
+ ucb->irq_ris_enbl &= ~mask;
+
+ if (type & IRQ_TYPE_EDGE_FALLING)
+ ucb->irq_fal_enbl |= mask;
+ else
+ ucb->irq_fal_enbl &= ~mask;
+ if (ucb->irq_mask & mask) {
+ ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl &
+ ucb->irq_mask);
+ ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl &
+ ucb->irq_mask);
+ }
+ raw_spin_unlock(&ucb->irq_lock);
+
+ return 0;
+}
+
+static int ucb1x00_irq_set_wake(struct irq_data *data, unsigned int on)
+{
+ struct ucb1x00 *ucb = irq_data_get_irq_chip_data(data);
+ struct ucb1x00_plat_data *pdata = ucb->mcp->attached_device.platform_data;
+ unsigned mask = 1 << (data->irq - ucb->irq_base);
+
+ if (!pdata || !pdata->can_wakeup)
+ return -EINVAL;
+
+ raw_spin_lock(&ucb->irq_lock);
+ if (on)
+ ucb->irq_wake |= mask;
+ else
+ ucb->irq_wake &= ~mask;
+ raw_spin_unlock(&ucb->irq_lock);
+
+ return 0;
+}
+
+static struct irq_chip ucb1x00_irqchip = {
+ .name = "ucb1x00",
+ .irq_ack = ucb1x00_irq_noop,
+ .irq_mask = ucb1x00_irq_mask,
+ .irq_unmask = ucb1x00_irq_unmask,
+ .irq_set_type = ucb1x00_irq_set_type,
+ .irq_set_wake = ucb1x00_irq_set_wake,
+};
+
+static int ucb1x00_add_dev(struct ucb1x00 *ucb, struct ucb1x00_driver *drv)
+{
+ struct ucb1x00_dev *dev;
+ int ret;
+
+ dev = kmalloc(sizeof(struct ucb1x00_dev), GFP_KERNEL);
+ if (!dev)
+ return -ENOMEM;
+
+ dev->ucb = ucb;
+ dev->drv = drv;
+
+ ret = drv->add(dev);
+ if (ret) {
+ kfree(dev);
+ return ret;
+ }
+
+ list_add_tail(&dev->dev_node, &ucb->devs);
+ list_add_tail(&dev->drv_node, &drv->devs);
+
+ return ret;
+}
+
+static void ucb1x00_remove_dev(struct ucb1x00_dev *dev)
+{
+ dev->drv->remove(dev);
+ list_del(&dev->dev_node);
+ list_del(&dev->drv_node);
+ kfree(dev);
+}
+
+/*
+ * Try to probe our interrupt, rather than relying on lots of
+ * hard-coded machine dependencies. For reference, the expected
+ * IRQ mappings are:
+ *
+ * Machine Default IRQ
+ * adsbitsy IRQ_GPCIN4
+ * cerf IRQ_GPIO_UCB1200_IRQ
+ * flexanet IRQ_GPIO_GUI
+ * freebird IRQ_GPIO_FREEBIRD_UCB1300_IRQ
+ * graphicsclient ADS_EXT_IRQ(8)
+ * graphicsmaster ADS_EXT_IRQ(8)
+ * lart LART_IRQ_UCB1200
+ * omnimeter IRQ_GPIO23
+ * pfs168 IRQ_GPIO_UCB1300_IRQ
+ * simpad IRQ_GPIO_UCB1300_IRQ
+ * shannon SHANNON_IRQ_GPIO_IRQ_CODEC
+ * yopy IRQ_GPIO_UCB1200_IRQ
+ */
+static int ucb1x00_detect_irq(struct ucb1x00 *ucb)
+{
+ unsigned long mask;
+
+ mask = probe_irq_on();
+
+ /*
+ * Enable the ADC interrupt.
+ */
+ ucb1x00_reg_write(ucb, UCB_IE_RIS, UCB_IE_ADC);
+ ucb1x00_reg_write(ucb, UCB_IE_FAL, UCB_IE_ADC);
+ ucb1x00_reg_write(ucb, UCB_IE_CLEAR, 0xffff);
+ ucb1x00_reg_write(ucb, UCB_IE_CLEAR, 0);
+
+ /*
+ * Cause an ADC interrupt.
+ */
+ ucb1x00_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA);
+ ucb1x00_reg_write(ucb, UCB_ADC_CR, UCB_ADC_ENA | UCB_ADC_START);
+
+ /*
+ * Wait for the conversion to complete.
+ */
+ while ((ucb1x00_reg_read(ucb, UCB_ADC_DATA) & UCB_ADC_DAT_VAL) == 0);
+ ucb1x00_reg_write(ucb, UCB_ADC_CR, 0);
+
+ /*
+ * Disable and clear interrupt.
+ */
+ ucb1x00_reg_write(ucb, UCB_IE_RIS, 0);
+ ucb1x00_reg_write(ucb, UCB_IE_FAL, 0);
+ ucb1x00_reg_write(ucb, UCB_IE_CLEAR, 0xffff);
+ ucb1x00_reg_write(ucb, UCB_IE_CLEAR, 0);
+
+ /*
+ * Read triggered interrupt.
+ */
+ return probe_irq_off(mask);
+}
+
+static void ucb1x00_release(struct device *dev)
+{
+ struct ucb1x00 *ucb = classdev_to_ucb1x00(dev);
+ kfree(ucb);
+}
+
+static struct class ucb1x00_class = {
+ .name = "ucb1x00",
+ .dev_release = ucb1x00_release,
+};
+
+static int ucb1x00_probe(struct mcp *mcp)
+{
+ struct ucb1x00_plat_data *pdata = mcp->attached_device.platform_data;
+ struct ucb1x00_driver *drv;
+ struct ucb1x00 *ucb;
+ unsigned id, i, irq_base;
+ int ret = -ENODEV;
+
+ /* Tell the platform to deassert the UCB1x00 reset */
+ if (pdata && pdata->reset)
+ pdata->reset(UCB_RST_PROBE);
+
+ mcp_enable(mcp);
+ id = mcp_reg_read(mcp, UCB_ID);
+ mcp_disable(mcp);
+
+ if (id != UCB_ID_1200 && id != UCB_ID_1300 && id != UCB_ID_TC35143) {
+ printk(KERN_WARNING "UCB1x00 ID not found: %04x\n", id);
+ goto out;
+ }
+
+ ucb = kzalloc(sizeof(struct ucb1x00), GFP_KERNEL);
+ ret = -ENOMEM;
+ if (!ucb)
+ goto out;
+
+ device_initialize(&ucb->dev);
+ ucb->dev.class = &ucb1x00_class;
+ ucb->dev.parent = &mcp->attached_device;
+ dev_set_name(&ucb->dev, "ucb1x00");
+
+ raw_spin_lock_init(&ucb->irq_lock);
+ spin_lock_init(&ucb->io_lock);
+ mutex_init(&ucb->adc_mutex);
+
+ ucb->id = id;
+ ucb->mcp = mcp;
+
+ ret = device_add(&ucb->dev);
+ if (ret)
+ goto err_dev_add;
+
+ ucb1x00_enable(ucb);
+ ucb->irq = ucb1x00_detect_irq(ucb);
+ ucb1x00_disable(ucb);
+ if (!ucb->irq) {
+ dev_err(&ucb->dev, "IRQ probe failed\n");
+ ret = -ENODEV;
+ goto err_no_irq;
+ }
+
+ ucb->gpio.base = -1;
+ irq_base = pdata ? pdata->irq_base : 0;
+ ucb->irq_base = irq_alloc_descs(-1, irq_base, 16, -1);
+ if (ucb->irq_base < 0) {
+ dev_err(&ucb->dev, "unable to allocate 16 irqs: %d\n",
+ ucb->irq_base);
+ ret = ucb->irq_base;
+ goto err_irq_alloc;
+ }
+
+ for (i = 0; i < 16; i++) {
+ unsigned irq = ucb->irq_base + i;
+
+ irq_set_chip_and_handler(irq, &ucb1x00_irqchip, handle_edge_irq);
+ irq_set_chip_data(irq, ucb);
+ irq_clear_status_flags(irq, IRQ_NOREQUEST);
+ }
+
+ irq_set_irq_type(ucb->irq, IRQ_TYPE_EDGE_RISING);
+ irq_set_chained_handler_and_data(ucb->irq, ucb1x00_irq, ucb);
+
+ if (pdata && pdata->gpio_base) {
+ ucb->gpio.label = dev_name(&ucb->dev);
+ ucb->gpio.parent = &ucb->dev;
+ ucb->gpio.owner = THIS_MODULE;
+ ucb->gpio.base = pdata->gpio_base;
+ ucb->gpio.ngpio = 10;
+ ucb->gpio.set = ucb1x00_gpio_set;
+ ucb->gpio.get = ucb1x00_gpio_get;
+ ucb->gpio.direction_input = ucb1x00_gpio_direction_input;
+ ucb->gpio.direction_output = ucb1x00_gpio_direction_output;
+ ucb->gpio.to_irq = ucb1x00_to_irq;
+ ret = gpiochip_add_data(&ucb->gpio, ucb);
+ if (ret)
+ goto err_gpio_add;
+ } else
+ dev_info(&ucb->dev, "gpio_base not set so no gpiolib support");
+
+ mcp_set_drvdata(mcp, ucb);
+
+ if (pdata)
+ device_set_wakeup_capable(&ucb->dev, pdata->can_wakeup);
+
+ INIT_LIST_HEAD(&ucb->devs);
+ mutex_lock(&ucb1x00_mutex);
+ list_add_tail(&ucb->node, &ucb1x00_devices);
+ list_for_each_entry(drv, &ucb1x00_drivers, node) {
+ ucb1x00_add_dev(ucb, drv);
+ }
+ mutex_unlock(&ucb1x00_mutex);
+
+ return ret;
+
+ err_gpio_add:
+ irq_set_chained_handler(ucb->irq, NULL);
+ err_irq_alloc:
+ if (ucb->irq_base > 0)
+ irq_free_descs(ucb->irq_base, 16);
+ err_no_irq:
+ device_del(&ucb->dev);
+ err_dev_add:
+ put_device(&ucb->dev);
+ out:
+ if (pdata && pdata->reset)
+ pdata->reset(UCB_RST_PROBE_FAIL);
+ return ret;
+}
+
+static void ucb1x00_remove(struct mcp *mcp)
+{
+ struct ucb1x00_plat_data *pdata = mcp->attached_device.platform_data;
+ struct ucb1x00 *ucb = mcp_get_drvdata(mcp);
+ struct list_head *l, *n;
+
+ mutex_lock(&ucb1x00_mutex);
+ list_del(&ucb->node);
+ list_for_each_safe(l, n, &ucb->devs) {
+ struct ucb1x00_dev *dev = list_entry(l, struct ucb1x00_dev, dev_node);
+ ucb1x00_remove_dev(dev);
+ }
+ mutex_unlock(&ucb1x00_mutex);
+
+ if (ucb->gpio.base != -1)
+ gpiochip_remove(&ucb->gpio);
+
+ irq_set_chained_handler(ucb->irq, NULL);
+ irq_free_descs(ucb->irq_base, 16);
+ device_unregister(&ucb->dev);
+
+ if (pdata && pdata->reset)
+ pdata->reset(UCB_RST_REMOVE);
+}
+
+int ucb1x00_register_driver(struct ucb1x00_driver *drv)
+{
+ struct ucb1x00 *ucb;
+
+ INIT_LIST_HEAD(&drv->devs);
+ mutex_lock(&ucb1x00_mutex);
+ list_add_tail(&drv->node, &ucb1x00_drivers);
+ list_for_each_entry(ucb, &ucb1x00_devices, node) {
+ ucb1x00_add_dev(ucb, drv);
+ }
+ mutex_unlock(&ucb1x00_mutex);
+ return 0;
+}
+
+void ucb1x00_unregister_driver(struct ucb1x00_driver *drv)
+{
+ struct list_head *n, *l;
+
+ mutex_lock(&ucb1x00_mutex);
+ list_del(&drv->node);
+ list_for_each_safe(l, n, &drv->devs) {
+ struct ucb1x00_dev *dev = list_entry(l, struct ucb1x00_dev, drv_node);
+ ucb1x00_remove_dev(dev);
+ }
+ mutex_unlock(&ucb1x00_mutex);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int ucb1x00_suspend(struct device *dev)
+{
+ struct ucb1x00_plat_data *pdata = dev_get_platdata(dev);
+ struct ucb1x00 *ucb = dev_get_drvdata(dev);
+ struct ucb1x00_dev *udev;
+
+ mutex_lock(&ucb1x00_mutex);
+ list_for_each_entry(udev, &ucb->devs, dev_node) {
+ if (udev->drv->suspend)
+ udev->drv->suspend(udev);
+ }
+ mutex_unlock(&ucb1x00_mutex);
+
+ if (ucb->irq_wake) {
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&ucb->irq_lock, flags);
+ ucb1x00_enable(ucb);
+ ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl &
+ ucb->irq_wake);
+ ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl &
+ ucb->irq_wake);
+ ucb1x00_disable(ucb);
+ raw_spin_unlock_irqrestore(&ucb->irq_lock, flags);
+
+ enable_irq_wake(ucb->irq);
+ } else if (pdata && pdata->reset)
+ pdata->reset(UCB_RST_SUSPEND);
+
+ return 0;
+}
+
+static int ucb1x00_resume(struct device *dev)
+{
+ struct ucb1x00_plat_data *pdata = dev_get_platdata(dev);
+ struct ucb1x00 *ucb = dev_get_drvdata(dev);
+ struct ucb1x00_dev *udev;
+
+ if (!ucb->irq_wake && pdata && pdata->reset)
+ pdata->reset(UCB_RST_RESUME);
+
+ ucb1x00_enable(ucb);
+ ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out);
+ ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir);
+
+ if (ucb->irq_wake) {
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&ucb->irq_lock, flags);
+ ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl &
+ ucb->irq_mask);
+ ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl &
+ ucb->irq_mask);
+ raw_spin_unlock_irqrestore(&ucb->irq_lock, flags);
+
+ disable_irq_wake(ucb->irq);
+ }
+ ucb1x00_disable(ucb);
+
+ mutex_lock(&ucb1x00_mutex);
+ list_for_each_entry(udev, &ucb->devs, dev_node) {
+ if (udev->drv->resume)
+ udev->drv->resume(udev);
+ }
+ mutex_unlock(&ucb1x00_mutex);
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(ucb1x00_pm_ops, ucb1x00_suspend, ucb1x00_resume);
+
+static struct mcp_driver ucb1x00_driver = {
+ .drv = {
+ .name = "ucb1x00",
+ .owner = THIS_MODULE,
+ .pm = &ucb1x00_pm_ops,
+ },
+ .probe = ucb1x00_probe,
+ .remove = ucb1x00_remove,
+};
+
+static int __init ucb1x00_init(void)
+{
+ int ret = class_register(&ucb1x00_class);
+ if (ret == 0) {
+ ret = mcp_driver_register(&ucb1x00_driver);
+ if (ret)
+ class_unregister(&ucb1x00_class);
+ }
+ return ret;
+}
+
+static void __exit ucb1x00_exit(void)
+{
+ mcp_driver_unregister(&ucb1x00_driver);
+ class_unregister(&ucb1x00_class);
+}
+
+module_init(ucb1x00_init);
+module_exit(ucb1x00_exit);
+
+EXPORT_SYMBOL(ucb1x00_io_set_dir);
+EXPORT_SYMBOL(ucb1x00_io_write);
+EXPORT_SYMBOL(ucb1x00_io_read);
+
+EXPORT_SYMBOL(ucb1x00_adc_enable);
+EXPORT_SYMBOL(ucb1x00_adc_read);
+EXPORT_SYMBOL(ucb1x00_adc_disable);
+
+EXPORT_SYMBOL(ucb1x00_register_driver);
+EXPORT_SYMBOL(ucb1x00_unregister_driver);
+
+MODULE_ALIAS("mcp:ucb1x00");
+MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
+MODULE_DESCRIPTION("UCB1x00 core driver");
+MODULE_LICENSE("GPL");