Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 438 insertions, 0 deletions

diff --git a/drivers/net/ethernet/microchip/encx24j600_hw.h b/drivers/net/ethernet/microchip/encx24j600_hw.h
new file mode 100644
index 000000000..34c5a2898
--- /dev/null
+++ b/drivers/net/ethernet/microchip/encx24j600_hw.h
@@ -0,0 +1,438 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * encx24j600_hw.h: Register definitions
+ *
+ */
+
+#ifndef _ENCX24J600_HW_H
+#define _ENCX24J600_HW_H
+
+struct encx24j600_context {
+	struct spi_device *spi;
+	struct regmap *regmap;
+	struct regmap *phymap;
+	struct mutex mutex; /* mutex to protect access to regmap */
+	int bank;
+};
+
+int devm_regmap_init_encx24j600(struct device *dev,
+				struct encx24j600_context *ctx);
+
+/* Single-byte instructions */
+#define BANK_SELECT(bank) (0xC0 | ((bank & (BANK_MASK >> BANK_SHIFT)) << 1))
+#define B0SEL 0xC0		/* Bank 0 Select */
+#define B1SEL 0xC2		/* Bank 1 Select */
+#define B2SEL 0xC4		/* Bank 2 Select */
+#define B3SEL 0xC6		/* Bank 3 Select */
+#define SETETHRST 0xCA		/* System Reset */
+#define FCDISABLE 0xE0		/* Flow Control Disable */
+#define FCSINGLE 0xE2		/* Flow Control Single */
+#define FCMULTIPLE 0xE4		/* Flow Control Multiple */
+#define FCCLEAR 0xE6		/* Flow Control Clear */
+#define SETPKTDEC 0xCC		/* Decrement Packet Counter */
+#define DMASTOP 0xD2		/* DMA Stop */
+#define DMACKSUM 0xD8		/* DMA Start Checksum */
+#define DMACKSUMS 0xDA		/* DMA Start Checksum with Seed */
+#define DMACOPY 0xDC		/* DMA Start Copy */
+#define DMACOPYS 0xDE		/* DMA Start Copy and Checksum with Seed */
+#define SETTXRTS 0xD4		/* Request Packet Transmission */
+#define ENABLERX 0xE8		/* Enable RX */
+#define DISABLERX 0xEA		/* Disable RX */
+#define SETEIE 0xEC		/* Enable Interrupts */
+#define CLREIE 0xEE		/* Disable Interrupts */
+
+/* Two byte instructions */
+#define RBSEL 0xC8		/* Read Bank Select */
+
+/* Three byte instructions */
+#define WGPRDPT 0x60		/* Write EGPRDPT */
+#define RGPRDPT 0x62		/* Read EGPRDPT */
+#define WRXRDPT 0x64		/* Write ERXRDPT */
+#define RRXRDPT 0x66		/* Read ERXRDPT */
+#define WUDARDPT 0x68		/* Write EUDARDPT */
+#define RUDARDPT 0x6A		/* Read EUDARDPT */
+#define WGPWRPT 0x6C		/* Write EGPWRPT */
+#define RGPWRPT 0x6E		/* Read EGPWRPT */
+#define WRXWRPT 0x70		/* Write ERXWRPT */
+#define RRXWRPT 0x72		/* Read ERXWRPT */
+#define WUDAWRPT 0x74		/* Write EUDAWRPT */
+#define RUDAWRPT 0x76		/* Read EUDAWRPT */
+
+/* n byte instructions */
+#define RCRCODE 0x00
+#define WCRCODE 0x40
+#define BFSCODE 0x80
+#define BFCCODE 0xA0
+#define RCR(addr) (RCRCODE | (addr & ADDR_MASK)) /* Read Control Register */
+#define WCR(addr) (WCRCODE | (addr & ADDR_MASK)) /* Write Control Register */
+#define RCRU 0x20		/* Read Control Register Unbanked */
+#define WCRU 0x22		/* Write Control Register Unbanked */
+#define BFS(addr) (BFSCODE | (addr & ADDR_MASK)) /* Bit Field Set */
+#define BFC(addr) (BFCCODE | (addr & ADDR_MASK)) /* Bit Field Clear */
+#define BFSU 0x24		/* Bit Field Set Unbanked */
+#define BFCU 0x26		/* Bit Field Clear Unbanked */
+#define RGPDATA 0x28		/* Read EGPDATA */
+#define WGPDATA 0x2A		/* Write EGPDATA */
+#define RRXDATA 0x2C		/* Read ERXDATA */
+#define WRXDATA 0x2E		/* Write ERXDATA */
+#define RUDADATA 0x30		/* Read EUDADATA */
+#define WUDADATA 0x32		/* Write EUDADATA */
+
+#define SFR_REG_COUNT	0xA0
+
+/* ENC424J600 Control Registers
+ * Control register definitions are a combination of address
+ * and bank number
+ * - Register address (bits 0-4)
+ * - Bank number (bits 5-6)
+ */
+#define ADDR_MASK 0x1F
+#define BANK_MASK 0x60
+#define BANK_SHIFT 5
+
+/* All-bank registers */
+#define EUDAST 0x16
+#define EUDAND 0x18
+#define ESTAT 0x1A
+#define EIR 0x1C
+#define ECON1 0x1E
+
+/* Bank 0 registers */
+#define ETXST (0x00 | 0x00)
+#define ETXLEN (0x02 | 0x00)
+#define ERXST (0x04 | 0x00)
+#define ERXTAIL (0x06 | 0x00)
+#define ERXHEAD (0x08 | 0x00)
+#define EDMAST (0x0A | 0x00)
+#define EDMALEN (0x0C | 0x00)
+#define EDMADST (0x0E | 0x00)
+#define EDMACS (0x10 | 0x00)
+#define ETXSTAT (0x12 | 0x00)
+#define ETXWIRE (0x14 | 0x00)
+
+/* Bank 1 registers */
+#define EHT1 (0x00 | 0x20)
+#define EHT2 (0x02 | 0x20)
+#define EHT3 (0x04 | 0x20)
+#define EHT4 (0x06 | 0x20)
+#define EPMM1 (0x08 | 0x20)
+#define EPMM2 (0x0A | 0x20)
+#define EPMM3 (0x0C | 0x20)
+#define EPMM4 (0x0E | 0x20)
+#define EPMCS (0x10 | 0x20)
+#define EPMO (0x12 | 0x20)
+#define ERXFCON (0x14 | 0x20)
+
+/* Bank 2 registers */
+#define MACON1 (0x00 | 0x40)
+#define MACON2 (0x02 | 0x40)
+#define MABBIPG (0x04 | 0x40)
+#define MAIPG (0x06 | 0x40)
+#define MACLCON (0x08 | 0x40)
+#define MAMXFL (0x0A | 0x40)
+#define MICMD (0x12 | 0x40)
+#define MIREGADR (0x14 | 0x40)
+
+/* Bank 3 registers */
+#define MAADR3 (0x00 | 0x60)
+#define MAADR2 (0x02 | 0x60)
+#define MAADR1 (0x04 | 0x60)
+#define MIWR (0x06 | 0x60)
+#define MIRD (0x08 | 0x60)
+#define MISTAT (0x0A | 0x60)
+#define EPAUS (0x0C | 0x60)
+#define ECON2 (0x0E | 0x60)
+#define ERXWM (0x10 | 0x60)
+#define EIE (0x12 | 0x60)
+#define EIDLED (0x14 | 0x60)
+
+/* Unbanked registers */
+#define EGPDATA (0x00 | 0x80)
+#define ERXDATA (0x02 | 0x80)
+#define EUDADATA (0x04 | 0x80)
+#define EGPRDPT (0x06 | 0x80)
+#define EGPWRPT (0x08 | 0x80)
+#define ERXRDPT (0x0A | 0x80)
+#define ERXWRPT (0x0C | 0x80)
+#define EUDARDPT (0x0E | 0x80)
+#define EUDAWRPT (0x10 | 0x80)
+
+
+/* Register bit definitions */
+/* ESTAT */
+#define INT (1 << 15)
+#define FCIDLE (1 << 14)
+#define RXBUSY (1 << 13)
+#define CLKRDY (1 << 12)
+#define PHYDPX (1 << 10)
+#define PHYLNK (1 << 8)
+
+/* EIR */
+#define CRYPTEN (1 << 15)
+#define MODEXIF (1 << 14)
+#define HASHIF (1 << 13)
+#define AESIF (1 << 12)
+#define LINKIF (1 << 11)
+#define PKTIF (1 << 6)
+#define DMAIF (1 << 5)
+#define TXIF (1 << 3)
+#define TXABTIF (1 << 2)
+#define RXABTIF (1 << 1)
+#define PCFULIF (1 << 0)
+
+/* ECON1 */
+#define MODEXST (1 << 15)
+#define HASHEN (1 << 14)
+#define HASHOP (1 << 13)
+#define HASHLST (1 << 12)
+#define AESST (1 << 11)
+#define AESOP1 (1 << 10)
+#define AESOP0 (1 << 9)
+#define PKTDEC (1 << 8)
+#define FCOP1 (1 << 7)
+#define FCOP0 (1 << 6)
+#define DMAST (1 << 5)
+#define DMACPY (1 << 4)
+#define DMACSSD (1 << 3)
+#define DMANOCS (1 << 2)
+#define TXRTS (1 << 1)
+#define RXEN (1 << 0)
+
+/* ETXSTAT */
+#define LATECOL (1 << 10)
+#define MAXCOL (1 << 9)
+#define EXDEFER (1 << 8)
+#define ETXSTATL_DEFER (1 << 7)
+#define CRCBAD (1 << 4)
+#define COLCNT_MASK 0xF
+
+/* ERXFCON */
+#define HTEN (1 << 15)
+#define MPEN (1 << 14)
+#define NOTPM (1 << 12)
+#define PMEN3 (1 << 11)
+#define PMEN2 (1 << 10)
+#define PMEN1 (1 << 9)
+#define PMEN0 (1 << 8)
+#define CRCEEN (1 << 7)
+#define CRCEN (1 << 6)
+#define RUNTEEN (1 << 5)
+#define RUNTEN (1 << 4)
+#define UCEN (1 << 3)
+#define NOTMEEN (1 << 2)
+#define MCEN (1 << 1)
+#define BCEN (1 << 0)
+
+/* MACON1 */
+#define LOOPBK (1 << 4)
+#define RXPAUS (1 << 2)
+#define PASSALL (1 << 1)
+
+/* MACON2 */
+#define MACON2_DEFER (1 << 14)
+#define BPEN (1 << 13)
+#define NOBKOFF (1 << 12)
+#define PADCFG2 (1 << 7)
+#define PADCFG1 (1 << 6)
+#define PADCFG0 (1 << 5)
+#define TXCRCEN (1 << 4)
+#define PHDREN (1 << 3)
+#define HFRMEN (1 << 2)
+#define MACON2_RSV1 (1 << 1)
+#define FULDPX (1 << 0)
+
+/* MAIPG */
+/* value of the high byte is given by the reserved bits,
+ * value of the low byte is recomended setting of the
+ * IPG parameter.
+ */
+#define MAIPGH_VAL 0x0C
+#define MAIPGL_VAL 0x12
+
+/* MIREGADRH */
+#define MIREGADR_VAL (1 << 8)
+
+/* MIREGADRL */
+#define PHREG_MASK 0x1F
+
+/* MICMD */
+#define MIISCAN (1 << 1)
+#define MIIRD (1 << 0)
+
+/* MISTAT */
+#define NVALID (1 << 2)
+#define SCAN (1 << 1)
+#define BUSY (1 << 0)
+
+/* ECON2 */
+#define ETHEN (1 << 15)
+#define STRCH (1 << 14)
+#define TXMAC (1 << 13)
+#define SHA1MD5 (1 << 12)
+#define COCON3 (1 << 11)
+#define COCON2 (1 << 10)
+#define COCON1 (1 << 9)
+#define COCON0 (1 << 8)
+#define AUTOFC (1 << 7)
+#define TXRST (1 << 6)
+#define RXRST (1 << 5)
+#define ETHRST (1 << 4)
+#define MODLEN1 (1 << 3)
+#define MODLEN0 (1 << 2)
+#define AESLEN1 (1 << 1)
+#define AESLEN0 (1 << 0)
+
+/* EIE */
+#define INTIE (1 << 15)
+#define MODEXIE (1 << 14)
+#define HASHIE (1 << 13)
+#define AESIE (1 << 12)
+#define LINKIE (1 << 11)
+#define PKTIE (1 << 6)
+#define DMAIE (1 << 5)
+#define TXIE (1 << 3)
+#define TXABTIE (1 << 2)
+#define RXABTIE (1 << 1)
+#define PCFULIE (1 << 0)
+
+/* EIDLED */
+#define LACFG3 (1 << 15)
+#define LACFG2 (1 << 14)
+#define LACFG1 (1 << 13)
+#define LACFG0 (1 << 12)
+#define LBCFG3 (1 << 11)
+#define LBCFG2 (1 << 10)
+#define LBCFG1 (1 << 9)
+#define LBCFG0 (1 << 8)
+#define DEVID_SHIFT 5
+#define DEVID_MASK (0x7 << DEVID_SHIFT)
+#define REVID_SHIFT 0
+#define REVID_MASK (0x1F << REVID_SHIFT)
+
+/* PHY registers */
+#define PHCON1 0x00
+#define PHSTAT1 0x01
+#define PHANA 0x04
+#define PHANLPA 0x05
+#define PHANE 0x06
+#define PHCON2 0x11
+#define PHSTAT2 0x1B
+#define PHSTAT3 0x1F
+
+/* PHCON1 */
+#define PRST (1 << 15)
+#define PLOOPBK (1 << 14)
+#define SPD100 (1 << 13)
+#define ANEN (1 << 12)
+#define PSLEEP (1 << 11)
+#define RENEG (1 << 9)
+#define PFULDPX (1 << 8)
+
+/* PHSTAT1 */
+#define FULL100 (1 << 14)
+#define HALF100 (1 << 13)
+#define FULL10 (1 << 12)
+#define HALF10 (1 << 11)
+#define ANDONE (1 << 5)
+#define LRFAULT (1 << 4)
+#define ANABLE (1 << 3)
+#define LLSTAT (1 << 2)
+#define EXTREGS (1 << 0)
+
+/* PHSTAT2 */
+#define PLRITY (1 << 4)
+
+/* PHSTAT3 */
+#define PHY3SPD100 (1 << 3)
+#define PHY3DPX (1 << 4)
+#define SPDDPX_SHIFT 2
+#define SPDDPX_MASK (0x7 << SPDDPX_SHIFT)
+
+/* PHANA */
+/* Default value for PHY initialization*/
+#define PHANA_DEFAULT 0x05E1
+
+/* PHANE */
+#define PDFLT (1 << 4)
+#define LPARCD (1 << 1)
+#define LPANABL (1 << 0)
+
+#define EUDAST_TEST_VAL 0x1234
+
+#define TSV_SIZE 7
+
+#define ENCX24J600_DEV_ID 0x1
+
+/* Configuration */
+
+/* Led is on when the link is present and driven low
+ * temporarily when packet is TX'd or RX'd
+ */
+#define LED_A_SETTINGS 0xC
+
+/* Led is on if the link is in 100 Mbps mode */
+#define LED_B_SETTINGS 0x8
+
+/* maximum ethernet frame length
+ * Currently not used as a limit anywhere
+ * (we're using the "huge frame enable" feature of
+ * enc424j600).
+ */
+#define MAX_FRAMELEN 1518
+
+/* Size in bytes of the receive buffer in enc424j600.
+ * Must be word aligned (even).
+ */
+#define RX_BUFFER_SIZE (15 * MAX_FRAMELEN)
+
+/* Start of the general purpose area in sram */
+#define SRAM_GP_START 0x0
+
+/* SRAM size */
+#define SRAM_SIZE 0x6000
+
+/* Start of the receive buffer */
+#define ERXST_VAL (SRAM_SIZE - RX_BUFFER_SIZE)
+
+#define RSV_RXLONGEVDROPEV	16
+#define RSV_CARRIEREV		18
+#define RSV_CRCERROR		20
+#define RSV_LENCHECKERR		21
+#define RSV_LENOUTOFRANGE	22
+#define RSV_RXOK		23
+#define RSV_RXMULTICAST		24
+#define RSV_RXBROADCAST		25
+#define RSV_DRIBBLENIBBLE	26
+#define RSV_RXCONTROLFRAME	27
+#define RSV_RXPAUSEFRAME	28
+#define RSV_RXUNKNOWNOPCODE	29
+#define RSV_RXTYPEVLAN		30
+
+#define RSV_RUNTFILTERMATCH	31
+#define RSV_NOTMEFILTERMATCH	32
+#define RSV_HASHFILTERMATCH	33
+#define RSV_MAGICPKTFILTERMATCH	34
+#define RSV_PTRNMTCHFILTERMATCH	35
+#define RSV_UNICASTFILTERMATCH	36
+
+#define RSV_SIZE		8
+#define RSV_BITMASK(x)		(1 << ((x) - 16))
+#define RSV_GETBIT(x, y)	(((x) & RSV_BITMASK(y)) ? 1 : 0)
+
+struct rsv {
+	u16 next_packet;
+	u16 len;
+	u32 rxstat;
+};
+
+/* Put RX buffer at 0 as suggested by the Errata datasheet */
+
+#define RXSTART_INIT		ERXST_VAL
+#define RXEND_INIT		0x5FFF
+
+int regmap_encx24j600_spi_write(void *context, u8 reg, const u8 *data,
+				size_t count);
+int regmap_encx24j600_spi_read(void *context, u8 reg, u8 *data, size_t count);
+
+
+#endif