diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-07 18:49:45 +0000 |
commit | 2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch) | |
tree | 848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/net/ethernet/realtek/8139too.c | |
parent | Initial commit. (diff) | |
download | linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip |
Adding upstream version 6.1.76.upstream/6.1.76upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/net/ethernet/realtek/8139too.c')
-rw-r--r-- | drivers/net/ethernet/realtek/8139too.c | 2678 |
1 files changed, 2678 insertions, 0 deletions
diff --git a/drivers/net/ethernet/realtek/8139too.c b/drivers/net/ethernet/realtek/8139too.c new file mode 100644 index 000000000..469e2e229 --- /dev/null +++ b/drivers/net/ethernet/realtek/8139too.c @@ -0,0 +1,2678 @@ +/* + + 8139too.c: A RealTek RTL-8139 Fast Ethernet driver for Linux. + + Maintained by Jeff Garzik <jgarzik@pobox.com> + Copyright 2000-2002 Jeff Garzik + + Much code comes from Donald Becker's rtl8139.c driver, + versions 1.13 and older. This driver was originally based + on rtl8139.c version 1.07. Header of rtl8139.c version 1.13: + + -----<snip>----- + + Written 1997-2001 by Donald Becker. + This software may be used and distributed according to the + terms of the GNU General Public License (GPL), incorporated + herein by reference. Drivers based on or derived from this + code fall under the GPL and must retain the authorship, + copyright and license notice. This file is not a complete + program and may only be used when the entire operating + system is licensed under the GPL. + + This driver is for boards based on the RTL8129 and RTL8139 + PCI ethernet chips. + + The author may be reached as becker@scyld.com, or C/O Scyld + Computing Corporation 410 Severn Ave., Suite 210 Annapolis + MD 21403 + + Support and updates available at + http://www.scyld.com/network/rtl8139.html + + Twister-tuning table provided by Kinston + <shangh@realtek.com.tw>. + + -----<snip>----- + + This software may be used and distributed according to the terms + of the GNU General Public License, incorporated herein by reference. + + Contributors: + + Donald Becker - he wrote the original driver, kudos to him! + (but please don't e-mail him for support, this isn't his driver) + + Tigran Aivazian - bug fixes, skbuff free cleanup + + Martin Mares - suggestions for PCI cleanup + + David S. Miller - PCI DMA and softnet updates + + Ernst Gill - fixes ported from BSD driver + + Daniel Kobras - identified specific locations of + posted MMIO write bugginess + + Gerard Sharp - bug fix, testing and feedback + + David Ford - Rx ring wrap fix + + Dan DeMaggio - swapped RTL8139 cards with me, and allowed me + to find and fix a crucial bug on older chipsets. + + Donald Becker/Chris Butterworth/Marcus Westergren - + Noticed various Rx packet size-related buglets. + + Santiago Garcia Mantinan - testing and feedback + + Jens David - 2.2.x kernel backports + + Martin Dennett - incredibly helpful insight on undocumented + features of the 8139 chips + + Jean-Jacques Michel - bug fix + + Tobias Ringström - Rx interrupt status checking suggestion + + Andrew Morton - Clear blocked signals, avoid + buffer overrun setting current->comm. + + Kalle Olavi Niemitalo - Wake-on-LAN ioctls + + Robert Kuebel - Save kernel thread from dying on any signal. + + Submitting bug reports: + + "rtl8139-diag -mmmaaavvveefN" output + enable RTL8139_DEBUG below, and look at 'dmesg' or kernel log + +*/ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#define DRV_NAME "8139too" +#define DRV_VERSION "0.9.28" + + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/compiler.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/rtnetlink.h> +#include <linux/delay.h> +#include <linux/ethtool.h> +#include <linux/mii.h> +#include <linux/completion.h> +#include <linux/crc32.h> +#include <linux/io.h> +#include <linux/uaccess.h> +#include <linux/gfp.h> +#include <linux/if_vlan.h> +#include <asm/irq.h> + +#define RTL8139_DRIVER_NAME DRV_NAME " Fast Ethernet driver " DRV_VERSION + +/* Default Message level */ +#define RTL8139_DEF_MSG_ENABLE (NETIF_MSG_DRV | \ + NETIF_MSG_PROBE | \ + NETIF_MSG_LINK) + + +/* define to 1, 2 or 3 to enable copious debugging info */ +#define RTL8139_DEBUG 0 + +/* define to 1 to disable lightweight runtime debugging checks */ +#undef RTL8139_NDEBUG + + +#ifdef RTL8139_NDEBUG +# define assert(expr) do {} while (0) +#else +# define assert(expr) \ + if (unlikely(!(expr))) { \ + pr_err("Assertion failed! %s,%s,%s,line=%d\n", \ + #expr, __FILE__, __func__, __LINE__); \ + } +#endif + + +/* A few user-configurable values. */ +/* media options */ +#define MAX_UNITS 8 +static int media[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; +static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1}; + +/* Whether to use MMIO or PIO. Default to MMIO. */ +#ifdef CONFIG_8139TOO_PIO +static bool use_io = true; +#else +static bool use_io = false; +#endif + +/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast). + The RTL chips use a 64 element hash table based on the Ethernet CRC. */ +static int multicast_filter_limit = 32; + +/* bitmapped message enable number */ +static int debug = -1; + +/* + * Receive ring size + * Warning: 64K ring has hardware issues and may lock up. + */ +#if defined(CONFIG_SH_DREAMCAST) +#define RX_BUF_IDX 0 /* 8K ring */ +#else +#define RX_BUF_IDX 2 /* 32K ring */ +#endif +#define RX_BUF_LEN (8192 << RX_BUF_IDX) +#define RX_BUF_PAD 16 +#define RX_BUF_WRAP_PAD 2048 /* spare padding to handle lack of packet wrap */ + +#if RX_BUF_LEN == 65536 +#define RX_BUF_TOT_LEN RX_BUF_LEN +#else +#define RX_BUF_TOT_LEN (RX_BUF_LEN + RX_BUF_PAD + RX_BUF_WRAP_PAD) +#endif + +/* Number of Tx descriptor registers. */ +#define NUM_TX_DESC 4 + +/* max supported ethernet frame size -- must be at least (dev->mtu+18+4).*/ +#define MAX_ETH_FRAME_SIZE 1792 + +/* max supported payload size */ +#define MAX_ETH_DATA_SIZE (MAX_ETH_FRAME_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN) + +/* Size of the Tx bounce buffers -- must be at least (dev->mtu+18+4). */ +#define TX_BUF_SIZE MAX_ETH_FRAME_SIZE +#define TX_BUF_TOT_LEN (TX_BUF_SIZE * NUM_TX_DESC) + +/* PCI Tuning Parameters + Threshold is bytes transferred to chip before transmission starts. */ +#define TX_FIFO_THRESH 256 /* In bytes, rounded down to 32 byte units. */ + +/* The following settings are log_2(bytes)-4: 0 == 16 bytes .. 6==1024, 7==end of packet. */ +#define RX_FIFO_THRESH 7 /* Rx buffer level before first PCI xfer. */ +#define RX_DMA_BURST 7 /* Maximum PCI burst, '6' is 1024 */ +#define TX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */ +#define TX_RETRY 8 /* 0-15. retries = 16 + (TX_RETRY * 16) */ + +/* Operational parameters that usually are not changed. */ +/* Time in jiffies before concluding the transmitter is hung. */ +#define TX_TIMEOUT (6*HZ) + + +enum { + HAS_MII_XCVR = 0x010000, + HAS_CHIP_XCVR = 0x020000, + HAS_LNK_CHNG = 0x040000, +}; + +#define RTL_NUM_STATS 4 /* number of ETHTOOL_GSTATS u64's */ +#define RTL_REGS_VER 1 /* version of reg. data in ETHTOOL_GREGS */ +#define RTL_MIN_IO_SIZE 0x80 +#define RTL8139B_IO_SIZE 256 + +#define RTL8129_CAPS HAS_MII_XCVR +#define RTL8139_CAPS (HAS_CHIP_XCVR|HAS_LNK_CHNG) + +typedef enum { + RTL8139 = 0, + RTL8129, +} board_t; + + +/* indexed by board_t, above */ +static const struct { + const char *name; + u32 hw_flags; +} board_info[] = { + { "RealTek RTL8139", RTL8139_CAPS }, + { "RealTek RTL8129", RTL8129_CAPS }, +}; + + +static const struct pci_device_id rtl8139_pci_tbl[] = { + {0x10ec, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, + {0x10ec, 0x8138, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, + {0x1113, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, + {0x1500, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, + {0x4033, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, + {0x1186, 0x1300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, + {0x1186, 0x1340, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, + {0x13d1, 0xab06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, + {0x1259, 0xa117, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, + {0x1259, 0xa11e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, + {0x14ea, 0xab06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, + {0x14ea, 0xab07, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, + {0x11db, 0x1234, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, + {0x1432, 0x9130, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, + {0x02ac, 0x1012, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, + {0x018a, 0x0106, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, + {0x126c, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, + {0x1743, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, + {0x021b, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, + {0x16ec, 0xab06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, + +#ifdef CONFIG_SH_SECUREEDGE5410 + /* Bogus 8139 silicon reports 8129 without external PROM :-( */ + {0x10ec, 0x8129, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 }, +#endif +#ifdef CONFIG_8139TOO_8129 + {0x10ec, 0x8129, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8129 }, +#endif + + /* some crazy cards report invalid vendor ids like + * 0x0001 here. The other ids are valid and constant, + * so we simply don't match on the main vendor id. + */ + {PCI_ANY_ID, 0x8139, 0x10ec, 0x8139, 0, 0, RTL8139 }, + {PCI_ANY_ID, 0x8139, 0x1186, 0x1300, 0, 0, RTL8139 }, + {PCI_ANY_ID, 0x8139, 0x13d1, 0xab06, 0, 0, RTL8139 }, + + {0,} +}; +MODULE_DEVICE_TABLE (pci, rtl8139_pci_tbl); + +static struct { + const char str[ETH_GSTRING_LEN]; +} ethtool_stats_keys[] = { + { "early_rx" }, + { "tx_buf_mapped" }, + { "tx_timeouts" }, + { "rx_lost_in_ring" }, +}; + +/* The rest of these values should never change. */ + +/* Symbolic offsets to registers. */ +enum RTL8139_registers { + MAC0 = 0, /* Ethernet hardware address. */ + MAR0 = 8, /* Multicast filter. */ + TxStatus0 = 0x10, /* Transmit status (Four 32bit registers). */ + TxAddr0 = 0x20, /* Tx descriptors (also four 32bit). */ + RxBuf = 0x30, + ChipCmd = 0x37, + RxBufPtr = 0x38, + RxBufAddr = 0x3A, + IntrMask = 0x3C, + IntrStatus = 0x3E, + TxConfig = 0x40, + RxConfig = 0x44, + Timer = 0x48, /* A general-purpose counter. */ + RxMissed = 0x4C, /* 24 bits valid, write clears. */ + Cfg9346 = 0x50, + Config0 = 0x51, + Config1 = 0x52, + TimerInt = 0x54, + MediaStatus = 0x58, + Config3 = 0x59, + Config4 = 0x5A, /* absent on RTL-8139A */ + HltClk = 0x5B, + MultiIntr = 0x5C, + TxSummary = 0x60, + BasicModeCtrl = 0x62, + BasicModeStatus = 0x64, + NWayAdvert = 0x66, + NWayLPAR = 0x68, + NWayExpansion = 0x6A, + /* Undocumented registers, but required for proper operation. */ + FIFOTMS = 0x70, /* FIFO Control and test. */ + CSCR = 0x74, /* Chip Status and Configuration Register. */ + PARA78 = 0x78, + FlashReg = 0xD4, /* Communication with Flash ROM, four bytes. */ + PARA7c = 0x7c, /* Magic transceiver parameter register. */ + Config5 = 0xD8, /* absent on RTL-8139A */ +}; + +enum ClearBitMasks { + MultiIntrClear = 0xF000, + ChipCmdClear = 0xE2, + Config1Clear = (1<<7)|(1<<6)|(1<<3)|(1<<2)|(1<<1), +}; + +enum ChipCmdBits { + CmdReset = 0x10, + CmdRxEnb = 0x08, + CmdTxEnb = 0x04, + RxBufEmpty = 0x01, +}; + +/* Interrupt register bits, using my own meaningful names. */ +enum IntrStatusBits { + PCIErr = 0x8000, + PCSTimeout = 0x4000, + RxFIFOOver = 0x40, + RxUnderrun = 0x20, + RxOverflow = 0x10, + TxErr = 0x08, + TxOK = 0x04, + RxErr = 0x02, + RxOK = 0x01, + + RxAckBits = RxFIFOOver | RxOverflow | RxOK, +}; + +enum TxStatusBits { + TxHostOwns = 0x2000, + TxUnderrun = 0x4000, + TxStatOK = 0x8000, + TxOutOfWindow = 0x20000000, + TxAborted = 0x40000000, + TxCarrierLost = 0x80000000, +}; +enum RxStatusBits { + RxMulticast = 0x8000, + RxPhysical = 0x4000, + RxBroadcast = 0x2000, + RxBadSymbol = 0x0020, + RxRunt = 0x0010, + RxTooLong = 0x0008, + RxCRCErr = 0x0004, + RxBadAlign = 0x0002, + RxStatusOK = 0x0001, +}; + +/* Bits in RxConfig. */ +enum rx_mode_bits { + AcceptErr = 0x20, + AcceptRunt = 0x10, + AcceptBroadcast = 0x08, + AcceptMulticast = 0x04, + AcceptMyPhys = 0x02, + AcceptAllPhys = 0x01, +}; + +/* Bits in TxConfig. */ +enum tx_config_bits { + /* Interframe Gap Time. Only TxIFG96 doesn't violate IEEE 802.3 */ + TxIFGShift = 24, + TxIFG84 = (0 << TxIFGShift), /* 8.4us / 840ns (10 / 100Mbps) */ + TxIFG88 = (1 << TxIFGShift), /* 8.8us / 880ns (10 / 100Mbps) */ + TxIFG92 = (2 << TxIFGShift), /* 9.2us / 920ns (10 / 100Mbps) */ + TxIFG96 = (3 << TxIFGShift), /* 9.6us / 960ns (10 / 100Mbps) */ + + TxLoopBack = (1 << 18) | (1 << 17), /* enable loopback test mode */ + TxCRC = (1 << 16), /* DISABLE Tx pkt CRC append */ + TxClearAbt = (1 << 0), /* Clear abort (WO) */ + TxDMAShift = 8, /* DMA burst value (0-7) is shifted X many bits */ + TxRetryShift = 4, /* TXRR value (0-15) is shifted X many bits */ + + TxVersionMask = 0x7C800000, /* mask out version bits 30-26, 23 */ +}; + +/* Bits in Config1 */ +enum Config1Bits { + Cfg1_PM_Enable = 0x01, + Cfg1_VPD_Enable = 0x02, + Cfg1_PIO = 0x04, + Cfg1_MMIO = 0x08, + LWAKE = 0x10, /* not on 8139, 8139A */ + Cfg1_Driver_Load = 0x20, + Cfg1_LED0 = 0x40, + Cfg1_LED1 = 0x80, + SLEEP = (1 << 1), /* only on 8139, 8139A */ + PWRDN = (1 << 0), /* only on 8139, 8139A */ +}; + +/* Bits in Config3 */ +enum Config3Bits { + Cfg3_FBtBEn = (1 << 0), /* 1 = Fast Back to Back */ + Cfg3_FuncRegEn = (1 << 1), /* 1 = enable CardBus Function registers */ + Cfg3_CLKRUN_En = (1 << 2), /* 1 = enable CLKRUN */ + Cfg3_CardB_En = (1 << 3), /* 1 = enable CardBus registers */ + Cfg3_LinkUp = (1 << 4), /* 1 = wake up on link up */ + Cfg3_Magic = (1 << 5), /* 1 = wake up on Magic Packet (tm) */ + Cfg3_PARM_En = (1 << 6), /* 0 = software can set twister parameters */ + Cfg3_GNTSel = (1 << 7), /* 1 = delay 1 clock from PCI GNT signal */ +}; + +/* Bits in Config4 */ +enum Config4Bits { + LWPTN = (1 << 2), /* not on 8139, 8139A */ +}; + +/* Bits in Config5 */ +enum Config5Bits { + Cfg5_PME_STS = (1 << 0), /* 1 = PCI reset resets PME_Status */ + Cfg5_LANWake = (1 << 1), /* 1 = enable LANWake signal */ + Cfg5_LDPS = (1 << 2), /* 0 = save power when link is down */ + Cfg5_FIFOAddrPtr= (1 << 3), /* Realtek internal SRAM testing */ + Cfg5_UWF = (1 << 4), /* 1 = accept unicast wakeup frame */ + Cfg5_MWF = (1 << 5), /* 1 = accept multicast wakeup frame */ + Cfg5_BWF = (1 << 6), /* 1 = accept broadcast wakeup frame */ +}; + +enum RxConfigBits { + /* rx fifo threshold */ + RxCfgFIFOShift = 13, + RxCfgFIFONone = (7 << RxCfgFIFOShift), + + /* Max DMA burst */ + RxCfgDMAShift = 8, + RxCfgDMAUnlimited = (7 << RxCfgDMAShift), + + /* rx ring buffer length */ + RxCfgRcv8K = 0, + RxCfgRcv16K = (1 << 11), + RxCfgRcv32K = (1 << 12), + RxCfgRcv64K = (1 << 11) | (1 << 12), + + /* Disable packet wrap at end of Rx buffer. (not possible with 64k) */ + RxNoWrap = (1 << 7), +}; + +/* Twister tuning parameters from RealTek. + Completely undocumented, but required to tune bad links on some boards. */ +enum CSCRBits { + CSCR_LinkOKBit = 0x0400, + CSCR_LinkChangeBit = 0x0800, + CSCR_LinkStatusBits = 0x0f000, + CSCR_LinkDownOffCmd = 0x003c0, + CSCR_LinkDownCmd = 0x0f3c0, +}; + +enum Cfg9346Bits { + Cfg9346_Lock = 0x00, + Cfg9346_Unlock = 0xC0, +}; + +typedef enum { + CH_8139 = 0, + CH_8139_K, + CH_8139A, + CH_8139A_G, + CH_8139B, + CH_8130, + CH_8139C, + CH_8100, + CH_8100B_8139D, + CH_8101, +} chip_t; + +enum chip_flags { + HasHltClk = (1 << 0), + HasLWake = (1 << 1), +}; + +#define HW_REVID(b30, b29, b28, b27, b26, b23, b22) \ + (b30<<30 | b29<<29 | b28<<28 | b27<<27 | b26<<26 | b23<<23 | b22<<22) +#define HW_REVID_MASK HW_REVID(1, 1, 1, 1, 1, 1, 1) + +/* directly indexed by chip_t, above */ +static const struct { + const char *name; + u32 version; /* from RTL8139C/RTL8139D docs */ + u32 flags; +} rtl_chip_info[] = { + { "RTL-8139", + HW_REVID(1, 0, 0, 0, 0, 0, 0), + HasHltClk, + }, + + { "RTL-8139 rev K", + HW_REVID(1, 1, 0, 0, 0, 0, 0), + HasHltClk, + }, + + { "RTL-8139A", + HW_REVID(1, 1, 1, 0, 0, 0, 0), + HasHltClk, /* XXX undocumented? */ + }, + + { "RTL-8139A rev G", + HW_REVID(1, 1, 1, 0, 0, 1, 0), + HasHltClk, /* XXX undocumented? */ + }, + + { "RTL-8139B", + HW_REVID(1, 1, 1, 1, 0, 0, 0), + HasLWake, + }, + + { "RTL-8130", + HW_REVID(1, 1, 1, 1, 1, 0, 0), + HasLWake, + }, + + { "RTL-8139C", + HW_REVID(1, 1, 1, 0, 1, 0, 0), + HasLWake, + }, + + { "RTL-8100", + HW_REVID(1, 1, 1, 1, 0, 1, 0), + HasLWake, + }, + + { "RTL-8100B/8139D", + HW_REVID(1, 1, 1, 0, 1, 0, 1), + HasHltClk /* XXX undocumented? */ + | HasLWake, + }, + + { "RTL-8101", + HW_REVID(1, 1, 1, 0, 1, 1, 1), + HasLWake, + }, +}; + +struct rtl_extra_stats { + unsigned long early_rx; + unsigned long tx_buf_mapped; + unsigned long tx_timeouts; + unsigned long rx_lost_in_ring; +}; + +struct rtl8139_stats { + u64 packets; + u64 bytes; + struct u64_stats_sync syncp; +}; + +struct rtl8139_private { + void __iomem *mmio_addr; + int drv_flags; + struct pci_dev *pci_dev; + u32 msg_enable; + struct napi_struct napi; + struct net_device *dev; + + unsigned char *rx_ring; + unsigned int cur_rx; /* RX buf index of next pkt */ + struct rtl8139_stats rx_stats; + dma_addr_t rx_ring_dma; + + unsigned int tx_flag; + unsigned long cur_tx; + unsigned long dirty_tx; + struct rtl8139_stats tx_stats; + unsigned char *tx_buf[NUM_TX_DESC]; /* Tx bounce buffers */ + unsigned char *tx_bufs; /* Tx bounce buffer region. */ + dma_addr_t tx_bufs_dma; + + signed char phys[4]; /* MII device addresses. */ + + /* Twister tune state. */ + char twistie, twist_row, twist_col; + + unsigned int watchdog_fired : 1; + unsigned int default_port : 4; /* Last dev->if_port value. */ + unsigned int have_thread : 1; + + spinlock_t lock; + spinlock_t rx_lock; + + chip_t chipset; + u32 rx_config; + struct rtl_extra_stats xstats; + + struct delayed_work thread; + + struct mii_if_info mii; + unsigned int regs_len; + unsigned long fifo_copy_timeout; +}; + +MODULE_AUTHOR ("Jeff Garzik <jgarzik@pobox.com>"); +MODULE_DESCRIPTION ("RealTek RTL-8139 Fast Ethernet driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +module_param(use_io, bool, 0); +MODULE_PARM_DESC(use_io, "Force use of I/O access mode. 0=MMIO 1=PIO"); +module_param(multicast_filter_limit, int, 0); +module_param_array(media, int, NULL, 0); +module_param_array(full_duplex, int, NULL, 0); +module_param(debug, int, 0); +MODULE_PARM_DESC (debug, "8139too bitmapped message enable number"); +MODULE_PARM_DESC (multicast_filter_limit, "8139too maximum number of filtered multicast addresses"); +MODULE_PARM_DESC (media, "8139too: Bits 4+9: force full duplex, bit 5: 100Mbps"); +MODULE_PARM_DESC (full_duplex, "8139too: Force full duplex for board(s) (1)"); + +static int read_eeprom (void __iomem *ioaddr, int location, int addr_len); +static int rtl8139_open (struct net_device *dev); +static int mdio_read (struct net_device *dev, int phy_id, int location); +static void mdio_write (struct net_device *dev, int phy_id, int location, + int val); +static void rtl8139_start_thread(struct rtl8139_private *tp); +static void rtl8139_tx_timeout (struct net_device *dev, unsigned int txqueue); +static void rtl8139_init_ring (struct net_device *dev); +static netdev_tx_t rtl8139_start_xmit (struct sk_buff *skb, + struct net_device *dev); +#ifdef CONFIG_NET_POLL_CONTROLLER +static void rtl8139_poll_controller(struct net_device *dev); +#endif +static int rtl8139_set_mac_address(struct net_device *dev, void *p); +static int rtl8139_poll(struct napi_struct *napi, int budget); +static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance); +static int rtl8139_close (struct net_device *dev); +static int netdev_ioctl (struct net_device *dev, struct ifreq *rq, int cmd); +static void rtl8139_get_stats64(struct net_device *dev, + struct rtnl_link_stats64 *stats); +static void rtl8139_set_rx_mode (struct net_device *dev); +static void __set_rx_mode (struct net_device *dev); +static void rtl8139_hw_start (struct net_device *dev); +static void rtl8139_thread (struct work_struct *work); +static void rtl8139_tx_timeout_task(struct work_struct *work); +static const struct ethtool_ops rtl8139_ethtool_ops; + +/* write MMIO register, with flush */ +/* Flush avoids rtl8139 bug w/ posted MMIO writes */ +#define RTL_W8_F(reg, val8) do { iowrite8 ((val8), ioaddr + (reg)); ioread8 (ioaddr + (reg)); } while (0) +#define RTL_W16_F(reg, val16) do { iowrite16 ((val16), ioaddr + (reg)); ioread16 (ioaddr + (reg)); } while (0) +#define RTL_W32_F(reg, val32) do { iowrite32 ((val32), ioaddr + (reg)); ioread32 (ioaddr + (reg)); } while (0) + +/* write MMIO register */ +#define RTL_W8(reg, val8) iowrite8 ((val8), ioaddr + (reg)) +#define RTL_W16(reg, val16) iowrite16 ((val16), ioaddr + (reg)) +#define RTL_W32(reg, val32) iowrite32 ((val32), ioaddr + (reg)) + +/* read MMIO register */ +#define RTL_R8(reg) ioread8 (ioaddr + (reg)) +#define RTL_R16(reg) ioread16 (ioaddr + (reg)) +#define RTL_R32(reg) ioread32 (ioaddr + (reg)) + + +static const u16 rtl8139_intr_mask = + PCIErr | PCSTimeout | RxUnderrun | RxOverflow | RxFIFOOver | + TxErr | TxOK | RxErr | RxOK; + +static const u16 rtl8139_norx_intr_mask = + PCIErr | PCSTimeout | RxUnderrun | + TxErr | TxOK | RxErr ; + +#if RX_BUF_IDX == 0 +static const unsigned int rtl8139_rx_config = + RxCfgRcv8K | RxNoWrap | + (RX_FIFO_THRESH << RxCfgFIFOShift) | + (RX_DMA_BURST << RxCfgDMAShift); +#elif RX_BUF_IDX == 1 +static const unsigned int rtl8139_rx_config = + RxCfgRcv16K | RxNoWrap | + (RX_FIFO_THRESH << RxCfgFIFOShift) | + (RX_DMA_BURST << RxCfgDMAShift); +#elif RX_BUF_IDX == 2 +static const unsigned int rtl8139_rx_config = + RxCfgRcv32K | RxNoWrap | + (RX_FIFO_THRESH << RxCfgFIFOShift) | + (RX_DMA_BURST << RxCfgDMAShift); +#elif RX_BUF_IDX == 3 +static const unsigned int rtl8139_rx_config = + RxCfgRcv64K | + (RX_FIFO_THRESH << RxCfgFIFOShift) | + (RX_DMA_BURST << RxCfgDMAShift); +#else +#error "Invalid configuration for 8139_RXBUF_IDX" +#endif + +static const unsigned int rtl8139_tx_config = + TxIFG96 | (TX_DMA_BURST << TxDMAShift) | (TX_RETRY << TxRetryShift); + +static void __rtl8139_cleanup_dev (struct net_device *dev) +{ + struct rtl8139_private *tp = netdev_priv(dev); + struct pci_dev *pdev; + + assert (dev != NULL); + assert (tp->pci_dev != NULL); + pdev = tp->pci_dev; + + if (tp->mmio_addr) + pci_iounmap (pdev, tp->mmio_addr); + + /* it's ok to call this even if we have no regions to free */ + pci_release_regions (pdev); + + free_netdev(dev); +} + + +static void rtl8139_chip_reset (void __iomem *ioaddr) +{ + int i; + + /* Soft reset the chip. */ + RTL_W8 (ChipCmd, CmdReset); + + /* Check that the chip has finished the reset. */ + for (i = 1000; i > 0; i--) { + barrier(); + if ((RTL_R8 (ChipCmd) & CmdReset) == 0) + break; + udelay (10); + } +} + + +static struct net_device *rtl8139_init_board(struct pci_dev *pdev) +{ + struct device *d = &pdev->dev; + void __iomem *ioaddr; + struct net_device *dev; + struct rtl8139_private *tp; + u8 tmp8; + int rc, disable_dev_on_err = 0; + unsigned int i, bar; + unsigned long io_len; + u32 version; + static const struct { + unsigned long mask; + char *type; + } res[] = { + { IORESOURCE_IO, "PIO" }, + { IORESOURCE_MEM, "MMIO" } + }; + + assert (pdev != NULL); + + /* dev and priv zeroed in alloc_etherdev */ + dev = alloc_etherdev (sizeof (*tp)); + if (dev == NULL) + return ERR_PTR(-ENOMEM); + + SET_NETDEV_DEV(dev, &pdev->dev); + + tp = netdev_priv(dev); + tp->pci_dev = pdev; + + /* enable device (incl. PCI PM wakeup and hotplug setup) */ + rc = pci_enable_device (pdev); + if (rc) + goto err_out; + + disable_dev_on_err = 1; + rc = pci_request_regions (pdev, DRV_NAME); + if (rc) + goto err_out; + + pci_set_master (pdev); + + u64_stats_init(&tp->rx_stats.syncp); + u64_stats_init(&tp->tx_stats.syncp); + +retry: + /* PIO bar register comes first. */ + bar = !use_io; + + io_len = pci_resource_len(pdev, bar); + + dev_dbg(d, "%s region size = 0x%02lX\n", res[bar].type, io_len); + + if (!(pci_resource_flags(pdev, bar) & res[bar].mask)) { + dev_err(d, "region #%d not a %s resource, aborting\n", bar, + res[bar].type); + rc = -ENODEV; + goto err_out; + } + if (io_len < RTL_MIN_IO_SIZE) { + dev_err(d, "Invalid PCI %s region size(s), aborting\n", + res[bar].type); + rc = -ENODEV; + goto err_out; + } + + ioaddr = pci_iomap(pdev, bar, 0); + if (!ioaddr) { + dev_err(d, "cannot map %s\n", res[bar].type); + if (!use_io) { + use_io = true; + goto retry; + } + rc = -ENODEV; + goto err_out; + } + tp->regs_len = io_len; + tp->mmio_addr = ioaddr; + + /* Bring old chips out of low-power mode. */ + RTL_W8 (HltClk, 'R'); + + /* check for missing/broken hardware */ + if (RTL_R32 (TxConfig) == 0xFFFFFFFF) { + dev_err(&pdev->dev, "Chip not responding, ignoring board\n"); + rc = -EIO; + goto err_out; + } + + /* identify chip attached to board */ + version = RTL_R32 (TxConfig) & HW_REVID_MASK; + for (i = 0; i < ARRAY_SIZE (rtl_chip_info); i++) + if (version == rtl_chip_info[i].version) { + tp->chipset = i; + goto match; + } + + /* if unknown chip, assume array element #0, original RTL-8139 in this case */ + i = 0; + dev_dbg(&pdev->dev, "unknown chip version, assuming RTL-8139\n"); + dev_dbg(&pdev->dev, "TxConfig = 0x%x\n", RTL_R32 (TxConfig)); + tp->chipset = 0; + +match: + pr_debug("chipset id (%d) == index %d, '%s'\n", + version, i, rtl_chip_info[i].name); + + if (tp->chipset >= CH_8139B) { + u8 new_tmp8 = tmp8 = RTL_R8 (Config1); + pr_debug("PCI PM wakeup\n"); + if ((rtl_chip_info[tp->chipset].flags & HasLWake) && + (tmp8 & LWAKE)) + new_tmp8 &= ~LWAKE; + new_tmp8 |= Cfg1_PM_Enable; + if (new_tmp8 != tmp8) { + RTL_W8 (Cfg9346, Cfg9346_Unlock); + RTL_W8 (Config1, tmp8); + RTL_W8 (Cfg9346, Cfg9346_Lock); + } + if (rtl_chip_info[tp->chipset].flags & HasLWake) { + tmp8 = RTL_R8 (Config4); + if (tmp8 & LWPTN) { + RTL_W8 (Cfg9346, Cfg9346_Unlock); + RTL_W8 (Config4, tmp8 & ~LWPTN); + RTL_W8 (Cfg9346, Cfg9346_Lock); + } + } + } else { + pr_debug("Old chip wakeup\n"); + tmp8 = RTL_R8 (Config1); + tmp8 &= ~(SLEEP | PWRDN); + RTL_W8 (Config1, tmp8); + } + + rtl8139_chip_reset (ioaddr); + + return dev; + +err_out: + __rtl8139_cleanup_dev (dev); + if (disable_dev_on_err) + pci_disable_device (pdev); + return ERR_PTR(rc); +} + +static int rtl8139_set_features(struct net_device *dev, netdev_features_t features) +{ + struct rtl8139_private *tp = netdev_priv(dev); + unsigned long flags; + netdev_features_t changed = features ^ dev->features; + void __iomem *ioaddr = tp->mmio_addr; + + if (!(changed & (NETIF_F_RXALL))) + return 0; + + spin_lock_irqsave(&tp->lock, flags); + + if (changed & NETIF_F_RXALL) { + int rx_mode = tp->rx_config; + if (features & NETIF_F_RXALL) + rx_mode |= (AcceptErr | AcceptRunt); + else + rx_mode &= ~(AcceptErr | AcceptRunt); + tp->rx_config = rtl8139_rx_config | rx_mode; + RTL_W32_F(RxConfig, tp->rx_config); + } + + spin_unlock_irqrestore(&tp->lock, flags); + + return 0; +} + +static const struct net_device_ops rtl8139_netdev_ops = { + .ndo_open = rtl8139_open, + .ndo_stop = rtl8139_close, + .ndo_get_stats64 = rtl8139_get_stats64, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = rtl8139_set_mac_address, + .ndo_start_xmit = rtl8139_start_xmit, + .ndo_set_rx_mode = rtl8139_set_rx_mode, + .ndo_eth_ioctl = netdev_ioctl, + .ndo_tx_timeout = rtl8139_tx_timeout, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = rtl8139_poll_controller, +#endif + .ndo_set_features = rtl8139_set_features, +}; + +static int rtl8139_init_one(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct net_device *dev = NULL; + struct rtl8139_private *tp; + __le16 addr[ETH_ALEN / 2]; + int i, addr_len, option; + void __iomem *ioaddr; + static int board_idx = -1; + + assert (pdev != NULL); + assert (ent != NULL); + + board_idx++; + + /* when we're built into the kernel, the driver version message + * is only printed if at least one 8139 board has been found + */ +#ifndef MODULE + { + static int printed_version; + if (!printed_version++) + pr_info(RTL8139_DRIVER_NAME "\n"); + } +#endif + + if (pdev->vendor == PCI_VENDOR_ID_REALTEK && + pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pdev->revision >= 0x20) { + dev_info(&pdev->dev, + "This (id %04x:%04x rev %02x) is an enhanced 8139C+ chip, use 8139cp\n", + pdev->vendor, pdev->device, pdev->revision); + return -ENODEV; + } + + if (pdev->vendor == PCI_VENDOR_ID_REALTEK && + pdev->device == PCI_DEVICE_ID_REALTEK_8139 && + pdev->subsystem_vendor == PCI_VENDOR_ID_ATHEROS && + pdev->subsystem_device == PCI_DEVICE_ID_REALTEK_8139) { + pr_info("OQO Model 2 detected. Forcing PIO\n"); + use_io = true; + } + + dev = rtl8139_init_board (pdev); + if (IS_ERR(dev)) + return PTR_ERR(dev); + + assert (dev != NULL); + tp = netdev_priv(dev); + tp->dev = dev; + + ioaddr = tp->mmio_addr; + assert (ioaddr != NULL); + + addr_len = read_eeprom (ioaddr, 0, 8) == 0x8129 ? 8 : 6; + for (i = 0; i < 3; i++) + addr[i] = cpu_to_le16(read_eeprom (ioaddr, i + 7, addr_len)); + eth_hw_addr_set(dev, (u8 *)addr); + + /* The Rtl8139-specific entries in the device structure. */ + dev->netdev_ops = &rtl8139_netdev_ops; + dev->ethtool_ops = &rtl8139_ethtool_ops; + dev->watchdog_timeo = TX_TIMEOUT; + netif_napi_add(dev, &tp->napi, rtl8139_poll); + + /* note: the hardware is not capable of sg/csum/highdma, however + * through the use of skb_copy_and_csum_dev we enable these + * features + */ + dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA; + dev->vlan_features = dev->features; + + dev->hw_features |= NETIF_F_RXALL; + dev->hw_features |= NETIF_F_RXFCS; + + /* MTU range: 68 - 1770 */ + dev->min_mtu = ETH_MIN_MTU; + dev->max_mtu = MAX_ETH_DATA_SIZE; + + /* tp zeroed and aligned in alloc_etherdev */ + tp = netdev_priv(dev); + + /* note: tp->chipset set in rtl8139_init_board */ + tp->drv_flags = board_info[ent->driver_data].hw_flags; + tp->mmio_addr = ioaddr; + tp->msg_enable = + (debug < 0 ? RTL8139_DEF_MSG_ENABLE : ((1 << debug) - 1)); + spin_lock_init (&tp->lock); + spin_lock_init (&tp->rx_lock); + INIT_DELAYED_WORK(&tp->thread, rtl8139_thread); + tp->mii.dev = dev; + tp->mii.mdio_read = mdio_read; + tp->mii.mdio_write = mdio_write; + tp->mii.phy_id_mask = 0x3f; + tp->mii.reg_num_mask = 0x1f; + + /* dev is fully set up and ready to use now */ + pr_debug("about to register device named %s (%p)...\n", + dev->name, dev); + i = register_netdev (dev); + if (i) goto err_out; + + pci_set_drvdata (pdev, dev); + + netdev_info(dev, "%s at 0x%p, %pM, IRQ %d\n", + board_info[ent->driver_data].name, + ioaddr, dev->dev_addr, pdev->irq); + + netdev_dbg(dev, "Identified 8139 chip type '%s'\n", + rtl_chip_info[tp->chipset].name); + + /* Find the connected MII xcvrs. + Doing this in open() would allow detecting external xcvrs later, but + takes too much time. */ +#ifdef CONFIG_8139TOO_8129 + if (tp->drv_flags & HAS_MII_XCVR) { + int phy, phy_idx = 0; + for (phy = 0; phy < 32 && phy_idx < sizeof(tp->phys); phy++) { + int mii_status = mdio_read(dev, phy, 1); + if (mii_status != 0xffff && mii_status != 0x0000) { + u16 advertising = mdio_read(dev, phy, 4); + tp->phys[phy_idx++] = phy; + netdev_info(dev, "MII transceiver %d status 0x%04x advertising %04x\n", + phy, mii_status, advertising); + } + } + if (phy_idx == 0) { + netdev_info(dev, "No MII transceivers found! Assuming SYM transceiver\n"); + tp->phys[0] = 32; + } + } else +#endif + tp->phys[0] = 32; + tp->mii.phy_id = tp->phys[0]; + + /* The lower four bits are the media type. */ + option = (board_idx >= MAX_UNITS) ? 0 : media[board_idx]; + if (option > 0) { + tp->mii.full_duplex = (option & 0x210) ? 1 : 0; + tp->default_port = option & 0xFF; + if (tp->default_port) + tp->mii.force_media = 1; + } + if (board_idx < MAX_UNITS && full_duplex[board_idx] > 0) + tp->mii.full_duplex = full_duplex[board_idx]; + if (tp->mii.full_duplex) { + netdev_info(dev, "Media type forced to Full Duplex\n"); + /* Changing the MII-advertised media because might prevent + re-connection. */ + tp->mii.force_media = 1; + } + if (tp->default_port) { + netdev_info(dev, " Forcing %dMbps %s-duplex operation\n", + (option & 0x20 ? 100 : 10), + (option & 0x10 ? "full" : "half")); + mdio_write(dev, tp->phys[0], 0, + ((option & 0x20) ? 0x2000 : 0) | /* 100Mbps? */ + ((option & 0x10) ? 0x0100 : 0)); /* Full duplex? */ + } + + /* Put the chip into low-power mode. */ + if (rtl_chip_info[tp->chipset].flags & HasHltClk) + RTL_W8 (HltClk, 'H'); /* 'R' would leave the clock running. */ + + return 0; + +err_out: + __rtl8139_cleanup_dev (dev); + pci_disable_device (pdev); + return i; +} + + +static void rtl8139_remove_one(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata (pdev); + struct rtl8139_private *tp = netdev_priv(dev); + + assert (dev != NULL); + + cancel_delayed_work_sync(&tp->thread); + + unregister_netdev (dev); + + __rtl8139_cleanup_dev (dev); + pci_disable_device (pdev); +} + + +/* Serial EEPROM section. */ + +/* EEPROM_Ctrl bits. */ +#define EE_SHIFT_CLK 0x04 /* EEPROM shift clock. */ +#define EE_CS 0x08 /* EEPROM chip select. */ +#define EE_DATA_WRITE 0x02 /* EEPROM chip data in. */ +#define EE_WRITE_0 0x00 +#define EE_WRITE_1 0x02 +#define EE_DATA_READ 0x01 /* EEPROM chip data out. */ +#define EE_ENB (0x80 | EE_CS) + +/* Delay between EEPROM clock transitions. + No extra delay is needed with 33Mhz PCI, but 66Mhz may change this. + */ + +#define eeprom_delay() (void)RTL_R8(Cfg9346) + +/* The EEPROM commands include the alway-set leading bit. */ +#define EE_WRITE_CMD (5) +#define EE_READ_CMD (6) +#define EE_ERASE_CMD (7) + +static int read_eeprom(void __iomem *ioaddr, int location, int addr_len) +{ + int i; + unsigned retval = 0; + int read_cmd = location | (EE_READ_CMD << addr_len); + + RTL_W8 (Cfg9346, EE_ENB & ~EE_CS); + RTL_W8 (Cfg9346, EE_ENB); + eeprom_delay (); + + /* Shift the read command bits out. */ + for (i = 4 + addr_len; i >= 0; i--) { + int dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0; + RTL_W8 (Cfg9346, EE_ENB | dataval); + eeprom_delay (); + RTL_W8 (Cfg9346, EE_ENB | dataval | EE_SHIFT_CLK); + eeprom_delay (); + } + RTL_W8 (Cfg9346, EE_ENB); + eeprom_delay (); + + for (i = 16; i > 0; i--) { + RTL_W8 (Cfg9346, EE_ENB | EE_SHIFT_CLK); + eeprom_delay (); + retval = + (retval << 1) | ((RTL_R8 (Cfg9346) & EE_DATA_READ) ? 1 : + 0); + RTL_W8 (Cfg9346, EE_ENB); + eeprom_delay (); + } + + /* Terminate the EEPROM access. */ + RTL_W8(Cfg9346, 0); + eeprom_delay (); + + return retval; +} + +/* MII serial management: mostly bogus for now. */ +/* Read and write the MII management registers using software-generated + serial MDIO protocol. + The maximum data clock rate is 2.5 Mhz. The minimum timing is usually + met by back-to-back PCI I/O cycles, but we insert a delay to avoid + "overclocking" issues. */ +#define MDIO_DIR 0x80 +#define MDIO_DATA_OUT 0x04 +#define MDIO_DATA_IN 0x02 +#define MDIO_CLK 0x01 +#define MDIO_WRITE0 (MDIO_DIR) +#define MDIO_WRITE1 (MDIO_DIR | MDIO_DATA_OUT) + +#define mdio_delay() RTL_R8(Config4) + + +static const char mii_2_8139_map[8] = { + BasicModeCtrl, + BasicModeStatus, + 0, + 0, + NWayAdvert, + NWayLPAR, + NWayExpansion, + 0 +}; + + +#ifdef CONFIG_8139TOO_8129 +/* Syncronize the MII management interface by shifting 32 one bits out. */ +static void mdio_sync (void __iomem *ioaddr) +{ + int i; + + for (i = 32; i >= 0; i--) { + RTL_W8 (Config4, MDIO_WRITE1); + mdio_delay (); + RTL_W8 (Config4, MDIO_WRITE1 | MDIO_CLK); + mdio_delay (); + } +} +#endif + +static int mdio_read (struct net_device *dev, int phy_id, int location) +{ + struct rtl8139_private *tp = netdev_priv(dev); + int retval = 0; +#ifdef CONFIG_8139TOO_8129 + void __iomem *ioaddr = tp->mmio_addr; + int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location; + int i; +#endif + + if (phy_id > 31) { /* Really a 8139. Use internal registers. */ + void __iomem *ioaddr = tp->mmio_addr; + return location < 8 && mii_2_8139_map[location] ? + RTL_R16 (mii_2_8139_map[location]) : 0; + } + +#ifdef CONFIG_8139TOO_8129 + mdio_sync (ioaddr); + /* Shift the read command bits out. */ + for (i = 15; i >= 0; i--) { + int dataval = (mii_cmd & (1 << i)) ? MDIO_DATA_OUT : 0; + + RTL_W8 (Config4, MDIO_DIR | dataval); + mdio_delay (); + RTL_W8 (Config4, MDIO_DIR | dataval | MDIO_CLK); + mdio_delay (); + } + + /* Read the two transition, 16 data, and wire-idle bits. */ + for (i = 19; i > 0; i--) { + RTL_W8 (Config4, 0); + mdio_delay (); + retval = (retval << 1) | ((RTL_R8 (Config4) & MDIO_DATA_IN) ? 1 : 0); + RTL_W8 (Config4, MDIO_CLK); + mdio_delay (); + } +#endif + + return (retval >> 1) & 0xffff; +} + + +static void mdio_write (struct net_device *dev, int phy_id, int location, + int value) +{ + struct rtl8139_private *tp = netdev_priv(dev); +#ifdef CONFIG_8139TOO_8129 + void __iomem *ioaddr = tp->mmio_addr; + int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (location << 18) | value; + int i; +#endif + + if (phy_id > 31) { /* Really a 8139. Use internal registers. */ + void __iomem *ioaddr = tp->mmio_addr; + if (location == 0) { + RTL_W8 (Cfg9346, Cfg9346_Unlock); + RTL_W16 (BasicModeCtrl, value); + RTL_W8 (Cfg9346, Cfg9346_Lock); + } else if (location < 8 && mii_2_8139_map[location]) + RTL_W16 (mii_2_8139_map[location], value); + return; + } + +#ifdef CONFIG_8139TOO_8129 + mdio_sync (ioaddr); + + /* Shift the command bits out. */ + for (i = 31; i >= 0; i--) { + int dataval = + (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0; + RTL_W8 (Config4, dataval); + mdio_delay (); + RTL_W8 (Config4, dataval | MDIO_CLK); + mdio_delay (); + } + /* Clear out extra bits. */ + for (i = 2; i > 0; i--) { + RTL_W8 (Config4, 0); + mdio_delay (); + RTL_W8 (Config4, MDIO_CLK); + mdio_delay (); + } +#endif +} + + +static int rtl8139_open (struct net_device *dev) +{ + struct rtl8139_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + const int irq = tp->pci_dev->irq; + int retval; + + retval = request_irq(irq, rtl8139_interrupt, IRQF_SHARED, dev->name, dev); + if (retval) + return retval; + + tp->tx_bufs = dma_alloc_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN, + &tp->tx_bufs_dma, GFP_KERNEL); + tp->rx_ring = dma_alloc_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN, + &tp->rx_ring_dma, GFP_KERNEL); + if (tp->tx_bufs == NULL || tp->rx_ring == NULL) { + free_irq(irq, dev); + + if (tp->tx_bufs) + dma_free_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN, + tp->tx_bufs, tp->tx_bufs_dma); + if (tp->rx_ring) + dma_free_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN, + tp->rx_ring, tp->rx_ring_dma); + + return -ENOMEM; + + } + + napi_enable(&tp->napi); + + tp->mii.full_duplex = tp->mii.force_media; + tp->tx_flag = (TX_FIFO_THRESH << 11) & 0x003f0000; + + rtl8139_init_ring (dev); + rtl8139_hw_start (dev); + netif_start_queue (dev); + + netif_dbg(tp, ifup, dev, + "%s() ioaddr %#llx IRQ %d GP Pins %02x %s-duplex\n", + __func__, + (unsigned long long)pci_resource_start (tp->pci_dev, 1), + irq, RTL_R8 (MediaStatus), + tp->mii.full_duplex ? "full" : "half"); + + rtl8139_start_thread(tp); + + return 0; +} + + +static void rtl_check_media (struct net_device *dev, unsigned int init_media) +{ + struct rtl8139_private *tp = netdev_priv(dev); + + if (tp->phys[0] >= 0) { + mii_check_media(&tp->mii, netif_msg_link(tp), init_media); + } +} + +/* Start the hardware at open or resume. */ +static void rtl8139_hw_start (struct net_device *dev) +{ + struct rtl8139_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + u32 i; + u8 tmp; + + /* Bring old chips out of low-power mode. */ + if (rtl_chip_info[tp->chipset].flags & HasHltClk) + RTL_W8 (HltClk, 'R'); + + rtl8139_chip_reset (ioaddr); + + /* unlock Config[01234] and BMCR register writes */ + RTL_W8_F (Cfg9346, Cfg9346_Unlock); + /* Restore our idea of the MAC address. */ + RTL_W32_F (MAC0 + 0, le32_to_cpu (*(__le32 *) (dev->dev_addr + 0))); + RTL_W32_F (MAC0 + 4, le16_to_cpu (*(__le16 *) (dev->dev_addr + 4))); + + tp->cur_rx = 0; + + /* init Rx ring buffer DMA address */ + RTL_W32_F (RxBuf, tp->rx_ring_dma); + + /* Must enable Tx/Rx before setting transfer thresholds! */ + RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb); + + tp->rx_config = rtl8139_rx_config | AcceptBroadcast | AcceptMyPhys; + RTL_W32 (RxConfig, tp->rx_config); + RTL_W32 (TxConfig, rtl8139_tx_config); + + rtl_check_media (dev, 1); + + if (tp->chipset >= CH_8139B) { + /* Disable magic packet scanning, which is enabled + * when PM is enabled in Config1. It can be reenabled + * via ETHTOOL_SWOL if desired. */ + RTL_W8 (Config3, RTL_R8 (Config3) & ~Cfg3_Magic); + } + + netdev_dbg(dev, "init buffer addresses\n"); + + /* Lock Config[01234] and BMCR register writes */ + RTL_W8 (Cfg9346, Cfg9346_Lock); + + /* init Tx buffer DMA addresses */ + for (i = 0; i < NUM_TX_DESC; i++) + RTL_W32_F (TxAddr0 + (i * 4), tp->tx_bufs_dma + (tp->tx_buf[i] - tp->tx_bufs)); + + RTL_W32 (RxMissed, 0); + + rtl8139_set_rx_mode (dev); + + /* no early-rx interrupts */ + RTL_W16 (MultiIntr, RTL_R16 (MultiIntr) & MultiIntrClear); + + /* make sure RxTx has started */ + tmp = RTL_R8 (ChipCmd); + if ((!(tmp & CmdRxEnb)) || (!(tmp & CmdTxEnb))) + RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb); + + /* Enable all known interrupts by setting the interrupt mask. */ + RTL_W16 (IntrMask, rtl8139_intr_mask); +} + + +/* Initialize the Rx and Tx rings, along with various 'dev' bits. */ +static void rtl8139_init_ring (struct net_device *dev) +{ + struct rtl8139_private *tp = netdev_priv(dev); + int i; + + tp->cur_rx = 0; + tp->cur_tx = 0; + tp->dirty_tx = 0; + + for (i = 0; i < NUM_TX_DESC; i++) + tp->tx_buf[i] = &tp->tx_bufs[i * TX_BUF_SIZE]; +} + + +/* This must be global for CONFIG_8139TOO_TUNE_TWISTER case */ +static int next_tick = 3 * HZ; + +#ifndef CONFIG_8139TOO_TUNE_TWISTER +static inline void rtl8139_tune_twister (struct net_device *dev, + struct rtl8139_private *tp) {} +#else +enum TwisterParamVals { + PARA78_default = 0x78fa8388, + PARA7c_default = 0xcb38de43, /* param[0][3] */ + PARA7c_xxx = 0xcb38de43, +}; + +static const unsigned long param[4][4] = { + {0xcb39de43, 0xcb39ce43, 0xfb38de03, 0xcb38de43}, + {0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83}, + {0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83}, + {0xbb39de43, 0xbb39ce43, 0xbb39ce83, 0xbb39ce83} +}; + +static void rtl8139_tune_twister (struct net_device *dev, + struct rtl8139_private *tp) +{ + int linkcase; + void __iomem *ioaddr = tp->mmio_addr; + + /* This is a complicated state machine to configure the "twister" for + impedance/echos based on the cable length. + All of this is magic and undocumented. + */ + switch (tp->twistie) { + case 1: + if (RTL_R16 (CSCR) & CSCR_LinkOKBit) { + /* We have link beat, let us tune the twister. */ + RTL_W16 (CSCR, CSCR_LinkDownOffCmd); + tp->twistie = 2; /* Change to state 2. */ + next_tick = HZ / 10; + } else { + /* Just put in some reasonable defaults for when beat returns. */ + RTL_W16 (CSCR, CSCR_LinkDownCmd); + RTL_W32 (FIFOTMS, 0x20); /* Turn on cable test mode. */ + RTL_W32 (PARA78, PARA78_default); + RTL_W32 (PARA7c, PARA7c_default); + tp->twistie = 0; /* Bail from future actions. */ + } + break; + case 2: + /* Read how long it took to hear the echo. */ + linkcase = RTL_R16 (CSCR) & CSCR_LinkStatusBits; + if (linkcase == 0x7000) + tp->twist_row = 3; + else if (linkcase == 0x3000) + tp->twist_row = 2; + else if (linkcase == 0x1000) + tp->twist_row = 1; + else + tp->twist_row = 0; + tp->twist_col = 0; + tp->twistie = 3; /* Change to state 2. */ + next_tick = HZ / 10; + break; + case 3: + /* Put out four tuning parameters, one per 100msec. */ + if (tp->twist_col == 0) + RTL_W16 (FIFOTMS, 0); + RTL_W32 (PARA7c, param[(int) tp->twist_row] + [(int) tp->twist_col]); + next_tick = HZ / 10; + if (++tp->twist_col >= 4) { + /* For short cables we are done. + For long cables (row == 3) check for mistune. */ + tp->twistie = + (tp->twist_row == 3) ? 4 : 0; + } + break; + case 4: + /* Special case for long cables: check for mistune. */ + if ((RTL_R16 (CSCR) & + CSCR_LinkStatusBits) == 0x7000) { + tp->twistie = 0; + break; + } else { + RTL_W32 (PARA7c, 0xfb38de03); + tp->twistie = 5; + next_tick = HZ / 10; + } + break; + case 5: + /* Retune for shorter cable (column 2). */ + RTL_W32 (FIFOTMS, 0x20); + RTL_W32 (PARA78, PARA78_default); + RTL_W32 (PARA7c, PARA7c_default); + RTL_W32 (FIFOTMS, 0x00); + tp->twist_row = 2; + tp->twist_col = 0; + tp->twistie = 3; + next_tick = HZ / 10; + break; + + default: + /* do nothing */ + break; + } +} +#endif /* CONFIG_8139TOO_TUNE_TWISTER */ + +static inline void rtl8139_thread_iter (struct net_device *dev, + struct rtl8139_private *tp, + void __iomem *ioaddr) +{ + int mii_lpa; + + mii_lpa = mdio_read (dev, tp->phys[0], MII_LPA); + + if (!tp->mii.force_media && mii_lpa != 0xffff) { + int duplex = ((mii_lpa & LPA_100FULL) || + (mii_lpa & 0x01C0) == 0x0040); + if (tp->mii.full_duplex != duplex) { + tp->mii.full_duplex = duplex; + + if (mii_lpa) { + netdev_info(dev, "Setting %s-duplex based on MII #%d link partner ability of %04x\n", + tp->mii.full_duplex ? "full" : "half", + tp->phys[0], mii_lpa); + } else { + netdev_info(dev, "media is unconnected, link down, or incompatible connection\n"); + } +#if 0 + RTL_W8 (Cfg9346, Cfg9346_Unlock); + RTL_W8 (Config1, tp->mii.full_duplex ? 0x60 : 0x20); + RTL_W8 (Cfg9346, Cfg9346_Lock); +#endif + } + } + + next_tick = HZ * 60; + + rtl8139_tune_twister (dev, tp); + + netdev_dbg(dev, "Media selection tick, Link partner %04x\n", + RTL_R16(NWayLPAR)); + netdev_dbg(dev, "Other registers are IntMask %04x IntStatus %04x\n", + RTL_R16(IntrMask), RTL_R16(IntrStatus)); + netdev_dbg(dev, "Chip config %02x %02x\n", + RTL_R8(Config0), RTL_R8(Config1)); +} + +static void rtl8139_thread (struct work_struct *work) +{ + struct rtl8139_private *tp = + container_of(work, struct rtl8139_private, thread.work); + struct net_device *dev = tp->mii.dev; + unsigned long thr_delay = next_tick; + + rtnl_lock(); + + if (!netif_running(dev)) + goto out_unlock; + + if (tp->watchdog_fired) { + tp->watchdog_fired = 0; + rtl8139_tx_timeout_task(work); + } else + rtl8139_thread_iter(dev, tp, tp->mmio_addr); + + if (tp->have_thread) + schedule_delayed_work(&tp->thread, thr_delay); +out_unlock: + rtnl_unlock (); +} + +static void rtl8139_start_thread(struct rtl8139_private *tp) +{ + tp->twistie = 0; + if (tp->chipset == CH_8139_K) + tp->twistie = 1; + else if (tp->drv_flags & HAS_LNK_CHNG) + return; + + tp->have_thread = 1; + tp->watchdog_fired = 0; + + schedule_delayed_work(&tp->thread, next_tick); +} + +static inline void rtl8139_tx_clear (struct rtl8139_private *tp) +{ + tp->cur_tx = 0; + tp->dirty_tx = 0; + + /* XXX account for unsent Tx packets in tp->stats.tx_dropped */ +} + +static void rtl8139_tx_timeout_task (struct work_struct *work) +{ + struct rtl8139_private *tp = + container_of(work, struct rtl8139_private, thread.work); + struct net_device *dev = tp->mii.dev; + void __iomem *ioaddr = tp->mmio_addr; + int i; + u8 tmp8; + + napi_disable(&tp->napi); + netif_stop_queue(dev); + synchronize_rcu(); + + netdev_dbg(dev, "Transmit timeout, status %02x %04x %04x media %02x\n", + RTL_R8(ChipCmd), RTL_R16(IntrStatus), + RTL_R16(IntrMask), RTL_R8(MediaStatus)); + /* Emit info to figure out what went wrong. */ + netdev_dbg(dev, "Tx queue start entry %ld dirty entry %ld\n", + tp->cur_tx, tp->dirty_tx); + for (i = 0; i < NUM_TX_DESC; i++) + netdev_dbg(dev, "Tx descriptor %d is %08x%s\n", + i, RTL_R32(TxStatus0 + (i * 4)), + i == tp->dirty_tx % NUM_TX_DESC ? + " (queue head)" : ""); + + tp->xstats.tx_timeouts++; + + /* disable Tx ASAP, if not already */ + tmp8 = RTL_R8 (ChipCmd); + if (tmp8 & CmdTxEnb) + RTL_W8 (ChipCmd, CmdRxEnb); + + spin_lock_bh(&tp->rx_lock); + /* Disable interrupts by clearing the interrupt mask. */ + RTL_W16 (IntrMask, 0x0000); + + /* Stop a shared interrupt from scavenging while we are. */ + spin_lock_irq(&tp->lock); + rtl8139_tx_clear (tp); + spin_unlock_irq(&tp->lock); + + /* ...and finally, reset everything */ + napi_enable(&tp->napi); + rtl8139_hw_start(dev); + netif_wake_queue(dev); + + spin_unlock_bh(&tp->rx_lock); +} + +static void rtl8139_tx_timeout(struct net_device *dev, unsigned int txqueue) +{ + struct rtl8139_private *tp = netdev_priv(dev); + + tp->watchdog_fired = 1; + if (!tp->have_thread) { + INIT_DELAYED_WORK(&tp->thread, rtl8139_thread); + schedule_delayed_work(&tp->thread, next_tick); + } +} + +static netdev_tx_t rtl8139_start_xmit (struct sk_buff *skb, + struct net_device *dev) +{ + struct rtl8139_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + unsigned int entry; + unsigned int len = skb->len; + unsigned long flags; + + /* Calculate the next Tx descriptor entry. */ + entry = tp->cur_tx % NUM_TX_DESC; + + /* Note: the chip doesn't have auto-pad! */ + if (likely(len < TX_BUF_SIZE)) { + if (len < ETH_ZLEN) + memset(tp->tx_buf[entry], 0, ETH_ZLEN); + skb_copy_and_csum_dev(skb, tp->tx_buf[entry]); + dev_kfree_skb_any(skb); + } else { + dev_kfree_skb_any(skb); + dev->stats.tx_dropped++; + return NETDEV_TX_OK; + } + + spin_lock_irqsave(&tp->lock, flags); + /* + * Writing to TxStatus triggers a DMA transfer of the data + * copied to tp->tx_buf[entry] above. Use a memory barrier + * to make sure that the device sees the updated data. + */ + wmb(); + RTL_W32_F (TxStatus0 + (entry * sizeof (u32)), + tp->tx_flag | max(len, (unsigned int)ETH_ZLEN)); + + tp->cur_tx++; + + if ((tp->cur_tx - NUM_TX_DESC) == tp->dirty_tx) + netif_stop_queue (dev); + spin_unlock_irqrestore(&tp->lock, flags); + + netif_dbg(tp, tx_queued, dev, "Queued Tx packet size %u to slot %d\n", + len, entry); + + return NETDEV_TX_OK; +} + + +static void rtl8139_tx_interrupt (struct net_device *dev, + struct rtl8139_private *tp, + void __iomem *ioaddr) +{ + unsigned long dirty_tx, tx_left; + + assert (dev != NULL); + assert (ioaddr != NULL); + + dirty_tx = tp->dirty_tx; + tx_left = tp->cur_tx - dirty_tx; + while (tx_left > 0) { + int entry = dirty_tx % NUM_TX_DESC; + int txstatus; + + txstatus = RTL_R32 (TxStatus0 + (entry * sizeof (u32))); + + if (!(txstatus & (TxStatOK | TxUnderrun | TxAborted))) + break; /* It still hasn't been Txed */ + + /* Note: TxCarrierLost is always asserted at 100mbps. */ + if (txstatus & (TxOutOfWindow | TxAborted)) { + /* There was an major error, log it. */ + netif_dbg(tp, tx_err, dev, "Transmit error, Tx status %08x\n", + txstatus); + dev->stats.tx_errors++; + if (txstatus & TxAborted) { + dev->stats.tx_aborted_errors++; + RTL_W32 (TxConfig, TxClearAbt); + RTL_W16 (IntrStatus, TxErr); + wmb(); + } + if (txstatus & TxCarrierLost) + dev->stats.tx_carrier_errors++; + if (txstatus & TxOutOfWindow) + dev->stats.tx_window_errors++; + } else { + if (txstatus & TxUnderrun) { + /* Add 64 to the Tx FIFO threshold. */ + if (tp->tx_flag < 0x00300000) + tp->tx_flag += 0x00020000; + dev->stats.tx_fifo_errors++; + } + dev->stats.collisions += (txstatus >> 24) & 15; + u64_stats_update_begin(&tp->tx_stats.syncp); + tp->tx_stats.packets++; + tp->tx_stats.bytes += txstatus & 0x7ff; + u64_stats_update_end(&tp->tx_stats.syncp); + } + + dirty_tx++; + tx_left--; + } + +#ifndef RTL8139_NDEBUG + if (tp->cur_tx - dirty_tx > NUM_TX_DESC) { + netdev_err(dev, "Out-of-sync dirty pointer, %ld vs. %ld\n", + dirty_tx, tp->cur_tx); + dirty_tx += NUM_TX_DESC; + } +#endif /* RTL8139_NDEBUG */ + + /* only wake the queue if we did work, and the queue is stopped */ + if (tp->dirty_tx != dirty_tx) { + tp->dirty_tx = dirty_tx; + mb(); + netif_wake_queue (dev); + } +} + + +/* TODO: clean this up! Rx reset need not be this intensive */ +static void rtl8139_rx_err (u32 rx_status, struct net_device *dev, + struct rtl8139_private *tp, void __iomem *ioaddr) +{ + u8 tmp8; +#ifdef CONFIG_8139_OLD_RX_RESET + int tmp_work; +#endif + + netif_dbg(tp, rx_err, dev, "Ethernet frame had errors, status %08x\n", + rx_status); + dev->stats.rx_errors++; + if (!(rx_status & RxStatusOK)) { + if (rx_status & RxTooLong) { + netdev_dbg(dev, "Oversized Ethernet frame, status %04x!\n", + rx_status); + /* A.C.: The chip hangs here. */ + } + if (rx_status & (RxBadSymbol | RxBadAlign)) + dev->stats.rx_frame_errors++; + if (rx_status & (RxRunt | RxTooLong)) + dev->stats.rx_length_errors++; + if (rx_status & RxCRCErr) + dev->stats.rx_crc_errors++; + } else { + tp->xstats.rx_lost_in_ring++; + } + +#ifndef CONFIG_8139_OLD_RX_RESET + tmp8 = RTL_R8 (ChipCmd); + RTL_W8 (ChipCmd, tmp8 & ~CmdRxEnb); + RTL_W8 (ChipCmd, tmp8); + RTL_W32 (RxConfig, tp->rx_config); + tp->cur_rx = 0; +#else + /* Reset the receiver, based on RealTek recommendation. (Bug?) */ + + /* disable receive */ + RTL_W8_F (ChipCmd, CmdTxEnb); + tmp_work = 200; + while (--tmp_work > 0) { + udelay(1); + tmp8 = RTL_R8 (ChipCmd); + if (!(tmp8 & CmdRxEnb)) + break; + } + if (tmp_work <= 0) + netdev_warn(dev, "rx stop wait too long\n"); + /* restart receive */ + tmp_work = 200; + while (--tmp_work > 0) { + RTL_W8_F (ChipCmd, CmdRxEnb | CmdTxEnb); + udelay(1); + tmp8 = RTL_R8 (ChipCmd); + if ((tmp8 & CmdRxEnb) && (tmp8 & CmdTxEnb)) + break; + } + if (tmp_work <= 0) + netdev_warn(dev, "tx/rx enable wait too long\n"); + + /* and reinitialize all rx related registers */ + RTL_W8_F (Cfg9346, Cfg9346_Unlock); + /* Must enable Tx/Rx before setting transfer thresholds! */ + RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb); + + tp->rx_config = rtl8139_rx_config | AcceptBroadcast | AcceptMyPhys; + RTL_W32 (RxConfig, tp->rx_config); + tp->cur_rx = 0; + + netdev_dbg(dev, "init buffer addresses\n"); + + /* Lock Config[01234] and BMCR register writes */ + RTL_W8 (Cfg9346, Cfg9346_Lock); + + /* init Rx ring buffer DMA address */ + RTL_W32_F (RxBuf, tp->rx_ring_dma); + + /* A.C.: Reset the multicast list. */ + __set_rx_mode (dev); +#endif +} + +#if RX_BUF_IDX == 3 +static inline void wrap_copy(struct sk_buff *skb, const unsigned char *ring, + u32 offset, unsigned int size) +{ + u32 left = RX_BUF_LEN - offset; + + if (size > left) { + skb_copy_to_linear_data(skb, ring + offset, left); + skb_copy_to_linear_data_offset(skb, left, ring, size - left); + } else + skb_copy_to_linear_data(skb, ring + offset, size); +} +#endif + +static void rtl8139_isr_ack(struct rtl8139_private *tp) +{ + void __iomem *ioaddr = tp->mmio_addr; + u16 status; + + status = RTL_R16 (IntrStatus) & RxAckBits; + + /* Clear out errors and receive interrupts */ + if (likely(status != 0)) { + if (unlikely(status & (RxFIFOOver | RxOverflow))) { + tp->dev->stats.rx_errors++; + if (status & RxFIFOOver) + tp->dev->stats.rx_fifo_errors++; + } + RTL_W16_F (IntrStatus, RxAckBits); + } +} + +static int rtl8139_rx(struct net_device *dev, struct rtl8139_private *tp, + int budget) +{ + void __iomem *ioaddr = tp->mmio_addr; + int received = 0; + unsigned char *rx_ring = tp->rx_ring; + unsigned int cur_rx = tp->cur_rx; + unsigned int rx_size = 0; + + netdev_dbg(dev, "In %s(), current %04x BufAddr %04x, free to %04x, Cmd %02x\n", + __func__, (u16)cur_rx, + RTL_R16(RxBufAddr), RTL_R16(RxBufPtr), RTL_R8(ChipCmd)); + + while (netif_running(dev) && received < budget && + (RTL_R8 (ChipCmd) & RxBufEmpty) == 0) { + u32 ring_offset = cur_rx % RX_BUF_LEN; + u32 rx_status; + unsigned int pkt_size; + struct sk_buff *skb; + + rmb(); + + /* read size+status of next frame from DMA ring buffer */ + rx_status = le32_to_cpu (*(__le32 *) (rx_ring + ring_offset)); + rx_size = rx_status >> 16; + if (likely(!(dev->features & NETIF_F_RXFCS))) + pkt_size = rx_size - 4; + else + pkt_size = rx_size; + + netif_dbg(tp, rx_status, dev, "%s() status %04x, size %04x, cur %04x\n", + __func__, rx_status, rx_size, cur_rx); +#if RTL8139_DEBUG > 2 + print_hex_dump(KERN_DEBUG, "Frame contents: ", + DUMP_PREFIX_OFFSET, 16, 1, + &rx_ring[ring_offset], 70, true); +#endif + + /* Packet copy from FIFO still in progress. + * Theoretically, this should never happen + * since EarlyRx is disabled. + */ + if (unlikely(rx_size == 0xfff0)) { + if (!tp->fifo_copy_timeout) + tp->fifo_copy_timeout = jiffies + 2; + else if (time_after(jiffies, tp->fifo_copy_timeout)) { + netdev_dbg(dev, "hung FIFO. Reset\n"); + rx_size = 0; + goto no_early_rx; + } + netif_dbg(tp, intr, dev, "fifo copy in progress\n"); + tp->xstats.early_rx++; + break; + } + +no_early_rx: + tp->fifo_copy_timeout = 0; + + /* If Rx err or invalid rx_size/rx_status received + * (which happens if we get lost in the ring), + * Rx process gets reset, so we abort any further + * Rx processing. + */ + if (unlikely((rx_size > (MAX_ETH_FRAME_SIZE+4)) || + (rx_size < 8) || + (!(rx_status & RxStatusOK)))) { + if ((dev->features & NETIF_F_RXALL) && + (rx_size <= (MAX_ETH_FRAME_SIZE + 4)) && + (rx_size >= 8) && + (!(rx_status & RxStatusOK))) { + /* Length is at least mostly OK, but pkt has + * error. I'm hoping we can handle some of these + * errors without resetting the chip. --Ben + */ + dev->stats.rx_errors++; + if (rx_status & RxCRCErr) { + dev->stats.rx_crc_errors++; + goto keep_pkt; + } + if (rx_status & RxRunt) { + dev->stats.rx_length_errors++; + goto keep_pkt; + } + } + rtl8139_rx_err (rx_status, dev, tp, ioaddr); + received = -1; + goto out; + } + +keep_pkt: + /* Malloc up new buffer, compatible with net-2e. */ + /* Omit the four octet CRC from the length. */ + + skb = napi_alloc_skb(&tp->napi, pkt_size); + if (likely(skb)) { +#if RX_BUF_IDX == 3 + wrap_copy(skb, rx_ring, ring_offset+4, pkt_size); +#else + skb_copy_to_linear_data (skb, &rx_ring[ring_offset + 4], pkt_size); +#endif + skb_put (skb, pkt_size); + + skb->protocol = eth_type_trans (skb, dev); + + u64_stats_update_begin(&tp->rx_stats.syncp); + tp->rx_stats.packets++; + tp->rx_stats.bytes += pkt_size; + u64_stats_update_end(&tp->rx_stats.syncp); + + netif_receive_skb (skb); + } else { + dev->stats.rx_dropped++; + } + received++; + + cur_rx = (cur_rx + rx_size + 4 + 3) & ~3; + RTL_W16 (RxBufPtr, (u16) (cur_rx - 16)); + + rtl8139_isr_ack(tp); + } + + if (unlikely(!received || rx_size == 0xfff0)) + rtl8139_isr_ack(tp); + + netdev_dbg(dev, "Done %s(), current %04x BufAddr %04x, free to %04x, Cmd %02x\n", + __func__, cur_rx, + RTL_R16(RxBufAddr), RTL_R16(RxBufPtr), RTL_R8(ChipCmd)); + + tp->cur_rx = cur_rx; + + /* + * The receive buffer should be mostly empty. + * Tell NAPI to reenable the Rx irq. + */ + if (tp->fifo_copy_timeout) + received = budget; + +out: + return received; +} + + +static void rtl8139_weird_interrupt (struct net_device *dev, + struct rtl8139_private *tp, + void __iomem *ioaddr, + int status, int link_changed) +{ + netdev_dbg(dev, "Abnormal interrupt, status %08x\n", status); + + assert (dev != NULL); + assert (tp != NULL); + assert (ioaddr != NULL); + + /* Update the error count. */ + dev->stats.rx_missed_errors += RTL_R32 (RxMissed); + RTL_W32 (RxMissed, 0); + + if ((status & RxUnderrun) && link_changed && + (tp->drv_flags & HAS_LNK_CHNG)) { + rtl_check_media(dev, 0); + status &= ~RxUnderrun; + } + + if (status & (RxUnderrun | RxErr)) + dev->stats.rx_errors++; + + if (status & PCSTimeout) + dev->stats.rx_length_errors++; + if (status & RxUnderrun) + dev->stats.rx_fifo_errors++; + if (status & PCIErr) { + u16 pci_cmd_status; + pci_read_config_word (tp->pci_dev, PCI_STATUS, &pci_cmd_status); + pci_write_config_word (tp->pci_dev, PCI_STATUS, pci_cmd_status); + + netdev_err(dev, "PCI Bus error %04x\n", pci_cmd_status); + } +} + +static int rtl8139_poll(struct napi_struct *napi, int budget) +{ + struct rtl8139_private *tp = container_of(napi, struct rtl8139_private, napi); + struct net_device *dev = tp->dev; + void __iomem *ioaddr = tp->mmio_addr; + int work_done; + + spin_lock(&tp->rx_lock); + work_done = 0; + if (likely(RTL_R16(IntrStatus) & RxAckBits)) + work_done += rtl8139_rx(dev, tp, budget); + + if (work_done < budget) { + unsigned long flags; + + spin_lock_irqsave(&tp->lock, flags); + if (napi_complete_done(napi, work_done)) + RTL_W16_F(IntrMask, rtl8139_intr_mask); + spin_unlock_irqrestore(&tp->lock, flags); + } + spin_unlock(&tp->rx_lock); + + return work_done; +} + +/* The interrupt handler does all of the Rx thread work and cleans up + after the Tx thread. */ +static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance) +{ + struct net_device *dev = (struct net_device *) dev_instance; + struct rtl8139_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + u16 status, ackstat; + int link_changed = 0; /* avoid bogus "uninit" warning */ + int handled = 0; + + spin_lock (&tp->lock); + status = RTL_R16 (IntrStatus); + + /* shared irq? */ + if (unlikely((status & rtl8139_intr_mask) == 0)) + goto out; + + handled = 1; + + /* h/w no longer present (hotplug?) or major error, bail */ + if (unlikely(status == 0xFFFF)) + goto out; + + /* close possible race's with dev_close */ + if (unlikely(!netif_running(dev))) { + RTL_W16 (IntrMask, 0); + goto out; + } + + /* Acknowledge all of the current interrupt sources ASAP, but + an first get an additional status bit from CSCR. */ + if (unlikely(status & RxUnderrun)) + link_changed = RTL_R16 (CSCR) & CSCR_LinkChangeBit; + + ackstat = status & ~(RxAckBits | TxErr); + if (ackstat) + RTL_W16 (IntrStatus, ackstat); + + /* Receive packets are processed by poll routine. + If not running start it now. */ + if (status & RxAckBits){ + if (napi_schedule_prep(&tp->napi)) { + RTL_W16_F (IntrMask, rtl8139_norx_intr_mask); + __napi_schedule(&tp->napi); + } + } + + /* Check uncommon events with one test. */ + if (unlikely(status & (PCIErr | PCSTimeout | RxUnderrun | RxErr))) + rtl8139_weird_interrupt (dev, tp, ioaddr, + status, link_changed); + + if (status & (TxOK | TxErr)) { + rtl8139_tx_interrupt (dev, tp, ioaddr); + if (status & TxErr) + RTL_W16 (IntrStatus, TxErr); + } + out: + spin_unlock (&tp->lock); + + netdev_dbg(dev, "exiting interrupt, intr_status=%#4.4x\n", + RTL_R16(IntrStatus)); + return IRQ_RETVAL(handled); +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +/* + * Polling receive - used by netconsole and other diagnostic tools + * to allow network i/o with interrupts disabled. + */ +static void rtl8139_poll_controller(struct net_device *dev) +{ + struct rtl8139_private *tp = netdev_priv(dev); + const int irq = tp->pci_dev->irq; + + disable_irq_nosync(irq); + rtl8139_interrupt(irq, dev); + enable_irq(irq); +} +#endif + +static int rtl8139_set_mac_address(struct net_device *dev, void *p) +{ + struct rtl8139_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + struct sockaddr *addr = p; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + eth_hw_addr_set(dev, addr->sa_data); + + spin_lock_irq(&tp->lock); + + RTL_W8_F(Cfg9346, Cfg9346_Unlock); + RTL_W32_F(MAC0 + 0, cpu_to_le32 (*(u32 *) (dev->dev_addr + 0))); + RTL_W32_F(MAC0 + 4, cpu_to_le32 (*(u32 *) (dev->dev_addr + 4))); + RTL_W8_F(Cfg9346, Cfg9346_Lock); + + spin_unlock_irq(&tp->lock); + + return 0; +} + +static int rtl8139_close (struct net_device *dev) +{ + struct rtl8139_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + unsigned long flags; + + netif_stop_queue(dev); + napi_disable(&tp->napi); + + netif_dbg(tp, ifdown, dev, "Shutting down ethercard, status was 0x%04x\n", + RTL_R16(IntrStatus)); + + spin_lock_irqsave (&tp->lock, flags); + + /* Stop the chip's Tx and Rx DMA processes. */ + RTL_W8 (ChipCmd, 0); + + /* Disable interrupts by clearing the interrupt mask. */ + RTL_W16 (IntrMask, 0); + + /* Update the error counts. */ + dev->stats.rx_missed_errors += RTL_R32 (RxMissed); + RTL_W32 (RxMissed, 0); + + spin_unlock_irqrestore (&tp->lock, flags); + + free_irq(tp->pci_dev->irq, dev); + + rtl8139_tx_clear (tp); + + dma_free_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN, + tp->rx_ring, tp->rx_ring_dma); + dma_free_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN, + tp->tx_bufs, tp->tx_bufs_dma); + tp->rx_ring = NULL; + tp->tx_bufs = NULL; + + /* Green! Put the chip in low-power mode. */ + RTL_W8 (Cfg9346, Cfg9346_Unlock); + + if (rtl_chip_info[tp->chipset].flags & HasHltClk) + RTL_W8 (HltClk, 'H'); /* 'R' would leave the clock running. */ + + return 0; +} + + +/* Get the ethtool Wake-on-LAN settings. Assumes that wol points to + kernel memory, *wol has been initialized as {ETHTOOL_GWOL}, and + other threads or interrupts aren't messing with the 8139. */ +static void rtl8139_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct rtl8139_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + + spin_lock_irq(&tp->lock); + if (rtl_chip_info[tp->chipset].flags & HasLWake) { + u8 cfg3 = RTL_R8 (Config3); + u8 cfg5 = RTL_R8 (Config5); + + wol->supported = WAKE_PHY | WAKE_MAGIC + | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST; + + wol->wolopts = 0; + if (cfg3 & Cfg3_LinkUp) + wol->wolopts |= WAKE_PHY; + if (cfg3 & Cfg3_Magic) + wol->wolopts |= WAKE_MAGIC; + /* (KON)FIXME: See how netdev_set_wol() handles the + following constants. */ + if (cfg5 & Cfg5_UWF) + wol->wolopts |= WAKE_UCAST; + if (cfg5 & Cfg5_MWF) + wol->wolopts |= WAKE_MCAST; + if (cfg5 & Cfg5_BWF) + wol->wolopts |= WAKE_BCAST; + } + spin_unlock_irq(&tp->lock); +} + + +/* Set the ethtool Wake-on-LAN settings. Return 0 or -errno. Assumes + that wol points to kernel memory and other threads or interrupts + aren't messing with the 8139. */ +static int rtl8139_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct rtl8139_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + u32 support; + u8 cfg3, cfg5; + + support = ((rtl_chip_info[tp->chipset].flags & HasLWake) + ? (WAKE_PHY | WAKE_MAGIC + | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST) + : 0); + if (wol->wolopts & ~support) + return -EINVAL; + + spin_lock_irq(&tp->lock); + cfg3 = RTL_R8 (Config3) & ~(Cfg3_LinkUp | Cfg3_Magic); + if (wol->wolopts & WAKE_PHY) + cfg3 |= Cfg3_LinkUp; + if (wol->wolopts & WAKE_MAGIC) + cfg3 |= Cfg3_Magic; + RTL_W8 (Cfg9346, Cfg9346_Unlock); + RTL_W8 (Config3, cfg3); + RTL_W8 (Cfg9346, Cfg9346_Lock); + + cfg5 = RTL_R8 (Config5) & ~(Cfg5_UWF | Cfg5_MWF | Cfg5_BWF); + /* (KON)FIXME: These are untested. We may have to set the + CRC0, Wakeup0 and LSBCRC0 registers too, but I have no + documentation. */ + if (wol->wolopts & WAKE_UCAST) + cfg5 |= Cfg5_UWF; + if (wol->wolopts & WAKE_MCAST) + cfg5 |= Cfg5_MWF; + if (wol->wolopts & WAKE_BCAST) + cfg5 |= Cfg5_BWF; + RTL_W8 (Config5, cfg5); /* need not unlock via Cfg9346 */ + spin_unlock_irq(&tp->lock); + + return 0; +} + +static void rtl8139_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) +{ + struct rtl8139_private *tp = netdev_priv(dev); + strscpy(info->driver, DRV_NAME, sizeof(info->driver)); + strscpy(info->version, DRV_VERSION, sizeof(info->version)); + strscpy(info->bus_info, pci_name(tp->pci_dev), sizeof(info->bus_info)); +} + +static int rtl8139_get_link_ksettings(struct net_device *dev, + struct ethtool_link_ksettings *cmd) +{ + struct rtl8139_private *tp = netdev_priv(dev); + spin_lock_irq(&tp->lock); + mii_ethtool_get_link_ksettings(&tp->mii, cmd); + spin_unlock_irq(&tp->lock); + return 0; +} + +static int rtl8139_set_link_ksettings(struct net_device *dev, + const struct ethtool_link_ksettings *cmd) +{ + struct rtl8139_private *tp = netdev_priv(dev); + int rc; + spin_lock_irq(&tp->lock); + rc = mii_ethtool_set_link_ksettings(&tp->mii, cmd); + spin_unlock_irq(&tp->lock); + return rc; +} + +static int rtl8139_nway_reset(struct net_device *dev) +{ + struct rtl8139_private *tp = netdev_priv(dev); + return mii_nway_restart(&tp->mii); +} + +static u32 rtl8139_get_link(struct net_device *dev) +{ + struct rtl8139_private *tp = netdev_priv(dev); + return mii_link_ok(&tp->mii); +} + +static u32 rtl8139_get_msglevel(struct net_device *dev) +{ + struct rtl8139_private *tp = netdev_priv(dev); + return tp->msg_enable; +} + +static void rtl8139_set_msglevel(struct net_device *dev, u32 datum) +{ + struct rtl8139_private *tp = netdev_priv(dev); + tp->msg_enable = datum; +} + +static int rtl8139_get_regs_len(struct net_device *dev) +{ + struct rtl8139_private *tp; + /* TODO: we are too slack to do reg dumping for pio, for now */ + if (use_io) + return 0; + tp = netdev_priv(dev); + return tp->regs_len; +} + +static void rtl8139_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *regbuf) +{ + struct rtl8139_private *tp; + + /* TODO: we are too slack to do reg dumping for pio, for now */ + if (use_io) + return; + tp = netdev_priv(dev); + + regs->version = RTL_REGS_VER; + + spin_lock_irq(&tp->lock); + memcpy_fromio(regbuf, tp->mmio_addr, regs->len); + spin_unlock_irq(&tp->lock); +} + +static int rtl8139_get_sset_count(struct net_device *dev, int sset) +{ + switch (sset) { + case ETH_SS_STATS: + return RTL_NUM_STATS; + default: + return -EOPNOTSUPP; + } +} + +static void rtl8139_get_ethtool_stats(struct net_device *dev, struct ethtool_stats *stats, u64 *data) +{ + struct rtl8139_private *tp = netdev_priv(dev); + + data[0] = tp->xstats.early_rx; + data[1] = tp->xstats.tx_buf_mapped; + data[2] = tp->xstats.tx_timeouts; + data[3] = tp->xstats.rx_lost_in_ring; +} + +static void rtl8139_get_strings(struct net_device *dev, u32 stringset, u8 *data) +{ + memcpy(data, ethtool_stats_keys, sizeof(ethtool_stats_keys)); +} + +static const struct ethtool_ops rtl8139_ethtool_ops = { + .get_drvinfo = rtl8139_get_drvinfo, + .get_regs_len = rtl8139_get_regs_len, + .get_regs = rtl8139_get_regs, + .nway_reset = rtl8139_nway_reset, + .get_link = rtl8139_get_link, + .get_msglevel = rtl8139_get_msglevel, + .set_msglevel = rtl8139_set_msglevel, + .get_wol = rtl8139_get_wol, + .set_wol = rtl8139_set_wol, + .get_strings = rtl8139_get_strings, + .get_sset_count = rtl8139_get_sset_count, + .get_ethtool_stats = rtl8139_get_ethtool_stats, + .get_link_ksettings = rtl8139_get_link_ksettings, + .set_link_ksettings = rtl8139_set_link_ksettings, +}; + +static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct rtl8139_private *tp = netdev_priv(dev); + int rc; + + if (!netif_running(dev)) + return -EINVAL; + + spin_lock_irq(&tp->lock); + rc = generic_mii_ioctl(&tp->mii, if_mii(rq), cmd, NULL); + spin_unlock_irq(&tp->lock); + + return rc; +} + + +static void +rtl8139_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *stats) +{ + struct rtl8139_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + unsigned long flags; + unsigned int start; + + if (netif_running(dev)) { + spin_lock_irqsave (&tp->lock, flags); + dev->stats.rx_missed_errors += RTL_R32 (RxMissed); + RTL_W32 (RxMissed, 0); + spin_unlock_irqrestore (&tp->lock, flags); + } + + netdev_stats_to_stats64(stats, &dev->stats); + + do { + start = u64_stats_fetch_begin_irq(&tp->rx_stats.syncp); + stats->rx_packets = tp->rx_stats.packets; + stats->rx_bytes = tp->rx_stats.bytes; + } while (u64_stats_fetch_retry_irq(&tp->rx_stats.syncp, start)); + + do { + start = u64_stats_fetch_begin_irq(&tp->tx_stats.syncp); + stats->tx_packets = tp->tx_stats.packets; + stats->tx_bytes = tp->tx_stats.bytes; + } while (u64_stats_fetch_retry_irq(&tp->tx_stats.syncp, start)); +} + +/* Set or clear the multicast filter for this adaptor. + This routine is not state sensitive and need not be SMP locked. */ + +static void __set_rx_mode (struct net_device *dev) +{ + struct rtl8139_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + u32 mc_filter[2]; /* Multicast hash filter */ + int rx_mode; + u32 tmp; + + netdev_dbg(dev, "rtl8139_set_rx_mode(%04x) done -- Rx config %08x\n", + dev->flags, RTL_R32(RxConfig)); + + /* Note: do not reorder, GCC is clever about common statements. */ + if (dev->flags & IFF_PROMISC) { + rx_mode = + AcceptBroadcast | AcceptMulticast | AcceptMyPhys | + AcceptAllPhys; + mc_filter[1] = mc_filter[0] = 0xffffffff; + } else if ((netdev_mc_count(dev) > multicast_filter_limit) || + (dev->flags & IFF_ALLMULTI)) { + /* Too many to filter perfectly -- accept all multicasts. */ + rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys; + mc_filter[1] = mc_filter[0] = 0xffffffff; + } else { + struct netdev_hw_addr *ha; + rx_mode = AcceptBroadcast | AcceptMyPhys; + mc_filter[1] = mc_filter[0] = 0; + netdev_for_each_mc_addr(ha, dev) { + int bit_nr = ether_crc(ETH_ALEN, ha->addr) >> 26; + + mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31); + rx_mode |= AcceptMulticast; + } + } + + if (dev->features & NETIF_F_RXALL) + rx_mode |= (AcceptErr | AcceptRunt); + + /* We can safely update without stopping the chip. */ + tmp = rtl8139_rx_config | rx_mode; + if (tp->rx_config != tmp) { + RTL_W32_F (RxConfig, tmp); + tp->rx_config = tmp; + } + RTL_W32_F (MAR0 + 0, mc_filter[0]); + RTL_W32_F (MAR0 + 4, mc_filter[1]); +} + +static void rtl8139_set_rx_mode (struct net_device *dev) +{ + unsigned long flags; + struct rtl8139_private *tp = netdev_priv(dev); + + spin_lock_irqsave (&tp->lock, flags); + __set_rx_mode(dev); + spin_unlock_irqrestore (&tp->lock, flags); +} + +static int __maybe_unused rtl8139_suspend(struct device *device) +{ + struct net_device *dev = dev_get_drvdata(device); + struct rtl8139_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + unsigned long flags; + + if (!netif_running (dev)) + return 0; + + netif_device_detach (dev); + + spin_lock_irqsave (&tp->lock, flags); + + /* Disable interrupts, stop Tx and Rx. */ + RTL_W16 (IntrMask, 0); + RTL_W8 (ChipCmd, 0); + + /* Update the error counts. */ + dev->stats.rx_missed_errors += RTL_R32 (RxMissed); + RTL_W32 (RxMissed, 0); + + spin_unlock_irqrestore (&tp->lock, flags); + + return 0; +} + +static int __maybe_unused rtl8139_resume(struct device *device) +{ + struct net_device *dev = dev_get_drvdata(device); + + if (!netif_running (dev)) + return 0; + + rtl8139_init_ring (dev); + rtl8139_hw_start (dev); + netif_device_attach (dev); + return 0; +} + +static SIMPLE_DEV_PM_OPS(rtl8139_pm_ops, rtl8139_suspend, rtl8139_resume); + +static struct pci_driver rtl8139_pci_driver = { + .name = DRV_NAME, + .id_table = rtl8139_pci_tbl, + .probe = rtl8139_init_one, + .remove = rtl8139_remove_one, + .driver.pm = &rtl8139_pm_ops, +}; + + +static int __init rtl8139_init_module (void) +{ + /* when we're a module, we always print a version message, + * even if no 8139 board is found. + */ +#ifdef MODULE + pr_info(RTL8139_DRIVER_NAME "\n"); +#endif + + return pci_register_driver(&rtl8139_pci_driver); +} + + +static void __exit rtl8139_cleanup_module (void) +{ + pci_unregister_driver (&rtl8139_pci_driver); +} + + +module_init(rtl8139_init_module); +module_exit(rtl8139_cleanup_module); |