Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 252 insertions, 0 deletions

diff --git a/drivers/net/ethernet/sfc/vfdi.h b/drivers/net/ethernet/sfc/vfdi.h
new file mode 100644
index 000000000..480b872eb
--- /dev/null
+++ b/drivers/net/ethernet/sfc/vfdi.h
@@ -0,0 +1,252 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/****************************************************************************
+ * Driver for Solarflare network controllers and boards
+ * Copyright 2010-2012 Solarflare Communications Inc.
+ */
+#ifndef _VFDI_H
+#define _VFDI_H
+
+/**
+ * DOC: Virtual Function Driver Interface
+ *
+ * This file contains software structures used to form a two way
+ * communication channel between the VF driver and the PF driver,
+ * named Virtual Function Driver Interface (VFDI).
+ *
+ * For the purposes of VFDI, a page is a memory region with size and
+ * alignment of 4K.  All addresses are DMA addresses to be used within
+ * the domain of the relevant VF.
+ *
+ * The only hardware-defined channels for a VF driver to communicate
+ * with the PF driver are the event mailboxes (%FR_CZ_USR_EV
+ * registers).  Writing to these registers generates an event with
+ * EV_CODE = EV_CODE_USR_EV, USER_QID set to the index of the mailbox
+ * and USER_EV_REG_VALUE set to the value written.  The PF driver may
+ * direct or disable delivery of these events by setting
+ * %FR_CZ_USR_EV_CFG.
+ *
+ * The PF driver can send arbitrary events to arbitrary event queues.
+ * However, for consistency, VFDI events from the PF are defined to
+ * follow the same form and be sent to the first event queue assigned
+ * to the VF while that queue is enabled by the VF driver.
+ *
+ * The general form of the variable bits of VFDI events is:
+ *
+ *       0             16                       24   31
+ *      | DATA        | TYPE                   | SEQ   |
+ *
+ * SEQ is a sequence number which should be incremented by 1 (modulo
+ * 256) for each event.  The sequence numbers used in each direction
+ * are independent.
+ *
+ * The VF submits requests of type &struct vfdi_req by sending the
+ * address of the request (ADDR) in a series of 4 events:
+ *
+ *       0             16                       24   31
+ *      | ADDR[0:15]  | VFDI_EV_TYPE_REQ_WORD0 | SEQ   |
+ *      | ADDR[16:31] | VFDI_EV_TYPE_REQ_WORD1 | SEQ+1 |
+ *      | ADDR[32:47] | VFDI_EV_TYPE_REQ_WORD2 | SEQ+2 |
+ *      | ADDR[48:63] | VFDI_EV_TYPE_REQ_WORD3 | SEQ+3 |
+ *
+ * The address must be page-aligned.  After receiving such a valid
+ * series of events, the PF driver will attempt to read the request
+ * and write a response to the same address.  In case of an invalid
+ * sequence of events or a DMA error, there will be no response.
+ *
+ * The VF driver may request that the PF driver writes status
+ * information into its domain asynchronously.  After writing the
+ * status, the PF driver will send an event of the form:
+ *
+ *       0             16                       24   31
+ *      | reserved    | VFDI_EV_TYPE_STATUS    | SEQ   |
+ *
+ * In case the VF must be reset for any reason, the PF driver will
+ * send an event of the form:
+ *
+ *       0             16                       24   31
+ *      | reserved    | VFDI_EV_TYPE_RESET     | SEQ   |
+ *
+ * It is then the responsibility of the VF driver to request
+ * reinitialisation of its queues.
+ */
+#define VFDI_EV_SEQ_LBN 24
+#define VFDI_EV_SEQ_WIDTH 8
+#define VFDI_EV_TYPE_LBN 16
+#define VFDI_EV_TYPE_WIDTH 8
+#define VFDI_EV_TYPE_REQ_WORD0 0
+#define VFDI_EV_TYPE_REQ_WORD1 1
+#define VFDI_EV_TYPE_REQ_WORD2 2
+#define VFDI_EV_TYPE_REQ_WORD3 3
+#define VFDI_EV_TYPE_STATUS 4
+#define VFDI_EV_TYPE_RESET 5
+#define VFDI_EV_DATA_LBN 0
+#define VFDI_EV_DATA_WIDTH 16
+
+struct vfdi_endpoint {
+	u8 mac_addr[ETH_ALEN];
+	__be16 tci;
+};
+
+/**
+ * enum vfdi_op - VFDI operation enumeration
+ * @VFDI_OP_RESPONSE: Indicates a response to the request.
+ * @VFDI_OP_INIT_EVQ: Initialize SRAM entries and initialize an EVQ.
+ * @VFDI_OP_INIT_RXQ: Initialize SRAM entries and initialize an RXQ.
+ * @VFDI_OP_INIT_TXQ: Initialize SRAM entries and initialize a TXQ.
+ * @VFDI_OP_FINI_ALL_QUEUES: Flush all queues, finalize all queues, then
+ *	finalize the SRAM entries.
+ * @VFDI_OP_INSERT_FILTER: Insert a MAC filter targeting the given RXQ.
+ * @VFDI_OP_REMOVE_ALL_FILTERS: Remove all filters.
+ * @VFDI_OP_SET_STATUS_PAGE: Set the DMA page(s) used for status updates
+ *	from PF and write the initial status.
+ * @VFDI_OP_CLEAR_STATUS_PAGE: Clear the DMA page(s) used for status
+ *	updates from PF.
+ */
+enum vfdi_op {
+	VFDI_OP_RESPONSE = 0,
+	VFDI_OP_INIT_EVQ = 1,
+	VFDI_OP_INIT_RXQ = 2,
+	VFDI_OP_INIT_TXQ = 3,
+	VFDI_OP_FINI_ALL_QUEUES = 4,
+	VFDI_OP_INSERT_FILTER = 5,
+	VFDI_OP_REMOVE_ALL_FILTERS = 6,
+	VFDI_OP_SET_STATUS_PAGE = 7,
+	VFDI_OP_CLEAR_STATUS_PAGE = 8,
+	VFDI_OP_LIMIT,
+};
+
+/* Response codes for VFDI operations. Other values may be used in future. */
+#define VFDI_RC_SUCCESS		0
+#define VFDI_RC_ENOMEM		(-12)
+#define VFDI_RC_EINVAL		(-22)
+#define VFDI_RC_EOPNOTSUPP	(-95)
+#define VFDI_RC_ETIMEDOUT	(-110)
+
+/**
+ * struct vfdi_req - Request from VF driver to PF driver
+ * @op: Operation code or response indicator, taken from &enum vfdi_op.
+ * @rc: Response code.  Set to 0 on success or a negative error code on failure.
+ * @u.init_evq.index: Index of event queue to create.
+ * @u.init_evq.buf_count: Number of 4k buffers backing event queue.
+ * @u.init_evq.addr: Array of length %u.init_evq.buf_count containing DMA
+ *	address of each page backing the event queue.
+ * @u.init_rxq.index: Index of receive queue to create.
+ * @u.init_rxq.buf_count: Number of 4k buffers backing receive queue.
+ * @u.init_rxq.evq: Instance of event queue to target receive events at.
+ * @u.init_rxq.label: Label used in receive events.
+ * @u.init_rxq.flags: Unused.
+ * @u.init_rxq.addr: Array of length %u.init_rxq.buf_count containing DMA
+ *	address of each page backing the receive queue.
+ * @u.init_txq.index: Index of transmit queue to create.
+ * @u.init_txq.buf_count: Number of 4k buffers backing transmit queue.
+ * @u.init_txq.evq: Instance of event queue to target transmit completion
+ *	events at.
+ * @u.init_txq.label: Label used in transmit completion events.
+ * @u.init_txq.flags: Checksum offload flags.
+ * @u.init_txq.addr: Array of length %u.init_txq.buf_count containing DMA
+ *	address of each page backing the transmit queue.
+ * @u.mac_filter.rxq: Insert MAC filter at VF local address/VLAN targeting
+ *	all traffic at this receive queue.
+ * @u.mac_filter.flags: MAC filter flags.
+ * @u.set_status_page.dma_addr: Base address for the &struct vfdi_status.
+ *	This address must be page-aligned and the PF may write up to a
+ *	whole page (allowing for extension of the structure).
+ * @u.set_status_page.peer_page_count: Number of additional pages the VF
+ *	has provided into which peer addresses may be DMAd.
+ * @u.set_status_page.peer_page_addr: Array of DMA addresses of pages.
+ *	If the number of peers exceeds 256, then the VF must provide
+ *	additional pages in this array. The PF will then DMA up to
+ *	512 vfdi_endpoint structures into each page.  These addresses
+ *	must be page-aligned.
+ */
+struct vfdi_req {
+	u32 op;
+	u32 reserved1;
+	s32 rc;
+	u32 reserved2;
+	union {
+		struct {
+			u32 index;
+			u32 buf_count;
+			u64 addr[];
+		} init_evq;
+		struct {
+			u32 index;
+			u32 buf_count;
+			u32 evq;
+			u32 label;
+			u32 flags;
+#define VFDI_RXQ_FLAG_SCATTER_EN 1
+			u32 reserved;
+			u64 addr[];
+		} init_rxq;
+		struct {
+			u32 index;
+			u32 buf_count;
+			u32 evq;
+			u32 label;
+			u32 flags;
+#define VFDI_TXQ_FLAG_IP_CSUM_DIS 1
+#define VFDI_TXQ_FLAG_TCPUDP_CSUM_DIS 2
+			u32 reserved;
+			u64 addr[];
+		} init_txq;
+		struct {
+			u32 rxq;
+			u32 flags;
+#define VFDI_MAC_FILTER_FLAG_RSS 1
+#define VFDI_MAC_FILTER_FLAG_SCATTER 2
+		} mac_filter;
+		struct {
+			u64 dma_addr;
+			u64 peer_page_count;
+			u64 peer_page_addr[];
+		} set_status_page;
+	} u;
+};
+
+/**
+ * struct vfdi_status - Status provided by PF driver to VF driver
+ * @generation_start: A generation count DMA'd to VF *before* the
+ *	rest of the structure.
+ * @generation_end: A generation count DMA'd to VF *after* the
+ *	rest of the structure.
+ * @version: Version of this structure; currently set to 1.  Later
+ *	versions must either be layout-compatible or only be sent to VFs
+ *	that specifically request them.
+ * @length: Total length of this structure including embedded tables
+ * @vi_scale: log2 the number of VIs available on this VF. This quantity
+ *	is used by the hardware for register decoding.
+ * @max_tx_channels: The maximum number of transmit queues the VF can use.
+ * @rss_rxq_count: The number of receive queues present in the shared RSS
+ *	indirection table.
+ * @peer_count: Total number of peers in the complete peer list. If larger
+ *	than ARRAY_SIZE(%peers), then the VF must provide sufficient
+ *	additional pages each of which is filled with vfdi_endpoint structures.
+ * @local: The MAC address and outer VLAN tag of *this* VF
+ * @peers: Table of peer addresses.  The @tci fields in these structures
+ *	are currently unused and must be ignored.  Additional peers are
+ *	written into any additional pages provided by the VF.
+ * @timer_quantum_ns: Timer quantum (nominal period between timer ticks)
+ *	for interrupt moderation timers, in nanoseconds. This member is only
+ *	present if @length is sufficiently large.
+ */
+struct vfdi_status {
+	u32 generation_start;
+	u32 generation_end;
+	u32 version;
+	u32 length;
+	u8 vi_scale;
+	u8 max_tx_channels;
+	u8 rss_rxq_count;
+	u8 reserved1;
+	u16 peer_count;
+	u16 reserved2;
+	struct vfdi_endpoint local;
+	struct vfdi_endpoint peers[256];
+
+	/* Members below here extend version 1 of this structure */
+	u32 timer_quantum_ns;
+};
+
+#endif