Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 513 insertions, 0 deletions

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c
new file mode 100644
index 000000000..80efdeeb0
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-dwc-qos-eth.c
@@ -0,0 +1,513 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Synopsys DWC Ethernet Quality-of-Service v4.10a linux driver
+ *
+ * Copyright (C) 2016 Joao Pinto <jpinto@synopsys.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/ethtool.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_net.h>
+#include <linux/mfd/syscon.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/stmmac.h>
+
+#include "stmmac_platform.h"
+#include "dwmac4.h"
+
+struct tegra_eqos {
+	struct device *dev;
+	void __iomem *regs;
+
+	struct reset_control *rst;
+	struct clk *clk_master;
+	struct clk *clk_slave;
+	struct clk *clk_tx;
+	struct clk *clk_rx;
+
+	struct gpio_desc *reset;
+};
+
+static int dwc_eth_dwmac_config_dt(struct platform_device *pdev,
+				   struct plat_stmmacenet_data *plat_dat)
+{
+	struct device *dev = &pdev->dev;
+	u32 burst_map = 0;
+	u32 bit_index = 0;
+	u32 a_index = 0;
+
+	if (!plat_dat->axi) {
+		plat_dat->axi = kzalloc(sizeof(struct stmmac_axi), GFP_KERNEL);
+
+		if (!plat_dat->axi)
+			return -ENOMEM;
+	}
+
+	plat_dat->axi->axi_lpi_en = device_property_read_bool(dev,
+							      "snps,en-lpi");
+	if (device_property_read_u32(dev, "snps,write-requests",
+				     &plat_dat->axi->axi_wr_osr_lmt)) {
+		/**
+		 * Since the register has a reset value of 1, if property
+		 * is missing, default to 1.
+		 */
+		plat_dat->axi->axi_wr_osr_lmt = 1;
+	} else {
+		/**
+		 * If property exists, to keep the behavior from dwc_eth_qos,
+		 * subtract one after parsing.
+		 */
+		plat_dat->axi->axi_wr_osr_lmt--;
+	}
+
+	if (device_property_read_u32(dev, "snps,read-requests",
+				     &plat_dat->axi->axi_rd_osr_lmt)) {
+		/**
+		 * Since the register has a reset value of 1, if property
+		 * is missing, default to 1.
+		 */
+		plat_dat->axi->axi_rd_osr_lmt = 1;
+	} else {
+		/**
+		 * If property exists, to keep the behavior from dwc_eth_qos,
+		 * subtract one after parsing.
+		 */
+		plat_dat->axi->axi_rd_osr_lmt--;
+	}
+	device_property_read_u32(dev, "snps,burst-map", &burst_map);
+
+	/* converts burst-map bitmask to burst array */
+	for (bit_index = 0; bit_index < 7; bit_index++) {
+		if (burst_map & (1 << bit_index)) {
+			switch (bit_index) {
+			case 0:
+			plat_dat->axi->axi_blen[a_index] = 4; break;
+			case 1:
+			plat_dat->axi->axi_blen[a_index] = 8; break;
+			case 2:
+			plat_dat->axi->axi_blen[a_index] = 16; break;
+			case 3:
+			plat_dat->axi->axi_blen[a_index] = 32; break;
+			case 4:
+			plat_dat->axi->axi_blen[a_index] = 64; break;
+			case 5:
+			plat_dat->axi->axi_blen[a_index] = 128; break;
+			case 6:
+			plat_dat->axi->axi_blen[a_index] = 256; break;
+			default:
+			break;
+			}
+			a_index++;
+		}
+	}
+
+	/* dwc-qos needs GMAC4, AAL, TSO and PMT */
+	plat_dat->has_gmac4 = 1;
+	plat_dat->dma_cfg->aal = 1;
+	plat_dat->tso_en = 1;
+	plat_dat->pmt = 1;
+
+	return 0;
+}
+
+static int dwc_qos_probe(struct platform_device *pdev,
+			 struct plat_stmmacenet_data *plat_dat,
+			 struct stmmac_resources *stmmac_res)
+{
+	int err;
+
+	plat_dat->stmmac_clk = devm_clk_get(&pdev->dev, "apb_pclk");
+	if (IS_ERR(plat_dat->stmmac_clk)) {
+		dev_err(&pdev->dev, "apb_pclk clock not found.\n");
+		return PTR_ERR(plat_dat->stmmac_clk);
+	}
+
+	err = clk_prepare_enable(plat_dat->stmmac_clk);
+	if (err < 0) {
+		dev_err(&pdev->dev, "failed to enable apb_pclk clock: %d\n",
+			err);
+		return err;
+	}
+
+	plat_dat->pclk = devm_clk_get(&pdev->dev, "phy_ref_clk");
+	if (IS_ERR(plat_dat->pclk)) {
+		dev_err(&pdev->dev, "phy_ref_clk clock not found.\n");
+		err = PTR_ERR(plat_dat->pclk);
+		goto disable;
+	}
+
+	err = clk_prepare_enable(plat_dat->pclk);
+	if (err < 0) {
+		dev_err(&pdev->dev, "failed to enable phy_ref clock: %d\n",
+			err);
+		goto disable;
+	}
+
+	return 0;
+
+disable:
+	clk_disable_unprepare(plat_dat->stmmac_clk);
+	return err;
+}
+
+static int dwc_qos_remove(struct platform_device *pdev)
+{
+	struct net_device *ndev = platform_get_drvdata(pdev);
+	struct stmmac_priv *priv = netdev_priv(ndev);
+
+	clk_disable_unprepare(priv->plat->pclk);
+	clk_disable_unprepare(priv->plat->stmmac_clk);
+
+	return 0;
+}
+
+#define SDMEMCOMPPADCTRL 0x8800
+#define  SDMEMCOMPPADCTRL_PAD_E_INPUT_OR_E_PWRD BIT(31)
+
+#define AUTO_CAL_CONFIG 0x8804
+#define  AUTO_CAL_CONFIG_START BIT(31)
+#define  AUTO_CAL_CONFIG_ENABLE BIT(29)
+
+#define AUTO_CAL_STATUS 0x880c
+#define  AUTO_CAL_STATUS_ACTIVE BIT(31)
+
+static void tegra_eqos_fix_speed(void *priv, unsigned int speed)
+{
+	struct tegra_eqos *eqos = priv;
+	unsigned long rate = 125000000;
+	bool needs_calibration = false;
+	u32 value;
+	int err;
+
+	switch (speed) {
+	case SPEED_1000:
+		needs_calibration = true;
+		rate = 125000000;
+		break;
+
+	case SPEED_100:
+		needs_calibration = true;
+		rate = 25000000;
+		break;
+
+	case SPEED_10:
+		rate = 2500000;
+		break;
+
+	default:
+		dev_err(eqos->dev, "invalid speed %u\n", speed);
+		break;
+	}
+
+	if (needs_calibration) {
+		/* calibrate */
+		value = readl(eqos->regs + SDMEMCOMPPADCTRL);
+		value |= SDMEMCOMPPADCTRL_PAD_E_INPUT_OR_E_PWRD;
+		writel(value, eqos->regs + SDMEMCOMPPADCTRL);
+
+		udelay(1);
+
+		value = readl(eqos->regs + AUTO_CAL_CONFIG);
+		value |= AUTO_CAL_CONFIG_START | AUTO_CAL_CONFIG_ENABLE;
+		writel(value, eqos->regs + AUTO_CAL_CONFIG);
+
+		err = readl_poll_timeout_atomic(eqos->regs + AUTO_CAL_STATUS,
+						value,
+						value & AUTO_CAL_STATUS_ACTIVE,
+						1, 10);
+		if (err < 0) {
+			dev_err(eqos->dev, "calibration did not start\n");
+			goto failed;
+		}
+
+		err = readl_poll_timeout_atomic(eqos->regs + AUTO_CAL_STATUS,
+						value,
+						(value & AUTO_CAL_STATUS_ACTIVE) == 0,
+						20, 200);
+		if (err < 0) {
+			dev_err(eqos->dev, "calibration didn't finish\n");
+			goto failed;
+		}
+
+	failed:
+		value = readl(eqos->regs + SDMEMCOMPPADCTRL);
+		value &= ~SDMEMCOMPPADCTRL_PAD_E_INPUT_OR_E_PWRD;
+		writel(value, eqos->regs + SDMEMCOMPPADCTRL);
+	} else {
+		value = readl(eqos->regs + AUTO_CAL_CONFIG);
+		value &= ~AUTO_CAL_CONFIG_ENABLE;
+		writel(value, eqos->regs + AUTO_CAL_CONFIG);
+	}
+
+	err = clk_set_rate(eqos->clk_tx, rate);
+	if (err < 0)
+		dev_err(eqos->dev, "failed to set TX rate: %d\n", err);
+}
+
+static int tegra_eqos_init(struct platform_device *pdev, void *priv)
+{
+	struct tegra_eqos *eqos = priv;
+	unsigned long rate;
+	u32 value;
+
+	rate = clk_get_rate(eqos->clk_slave);
+
+	value = (rate / 1000000) - 1;
+	writel(value, eqos->regs + GMAC_1US_TIC_COUNTER);
+
+	return 0;
+}
+
+static int tegra_eqos_probe(struct platform_device *pdev,
+			    struct plat_stmmacenet_data *data,
+			    struct stmmac_resources *res)
+{
+	struct device *dev = &pdev->dev;
+	struct tegra_eqos *eqos;
+	int err;
+
+	eqos = devm_kzalloc(&pdev->dev, sizeof(*eqos), GFP_KERNEL);
+	if (!eqos)
+		return -ENOMEM;
+
+	eqos->dev = &pdev->dev;
+	eqos->regs = res->addr;
+
+	if (!is_of_node(dev->fwnode))
+		goto bypass_clk_reset_gpio;
+
+	eqos->clk_master = devm_clk_get(&pdev->dev, "master_bus");
+	if (IS_ERR(eqos->clk_master)) {
+		err = PTR_ERR(eqos->clk_master);
+		goto error;
+	}
+
+	err = clk_prepare_enable(eqos->clk_master);
+	if (err < 0)
+		goto error;
+
+	eqos->clk_slave = devm_clk_get(&pdev->dev, "slave_bus");
+	if (IS_ERR(eqos->clk_slave)) {
+		err = PTR_ERR(eqos->clk_slave);
+		goto disable_master;
+	}
+
+	data->stmmac_clk = eqos->clk_slave;
+
+	err = clk_prepare_enable(eqos->clk_slave);
+	if (err < 0)
+		goto disable_master;
+
+	eqos->clk_rx = devm_clk_get(&pdev->dev, "rx");
+	if (IS_ERR(eqos->clk_rx)) {
+		err = PTR_ERR(eqos->clk_rx);
+		goto disable_slave;
+	}
+
+	err = clk_prepare_enable(eqos->clk_rx);
+	if (err < 0)
+		goto disable_slave;
+
+	eqos->clk_tx = devm_clk_get(&pdev->dev, "tx");
+	if (IS_ERR(eqos->clk_tx)) {
+		err = PTR_ERR(eqos->clk_tx);
+		goto disable_rx;
+	}
+
+	err = clk_prepare_enable(eqos->clk_tx);
+	if (err < 0)
+		goto disable_rx;
+
+	eqos->reset = devm_gpiod_get(&pdev->dev, "phy-reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(eqos->reset)) {
+		err = PTR_ERR(eqos->reset);
+		goto disable_tx;
+	}
+
+	usleep_range(2000, 4000);
+	gpiod_set_value(eqos->reset, 0);
+
+	/* MDIO bus was already reset just above */
+	data->mdio_bus_data->needs_reset = false;
+
+	eqos->rst = devm_reset_control_get(&pdev->dev, "eqos");
+	if (IS_ERR(eqos->rst)) {
+		err = PTR_ERR(eqos->rst);
+		goto reset_phy;
+	}
+
+	err = reset_control_assert(eqos->rst);
+	if (err < 0)
+		goto reset_phy;
+
+	usleep_range(2000, 4000);
+
+	err = reset_control_deassert(eqos->rst);
+	if (err < 0)
+		goto reset_phy;
+
+	usleep_range(2000, 4000);
+
+bypass_clk_reset_gpio:
+	data->fix_mac_speed = tegra_eqos_fix_speed;
+	data->init = tegra_eqos_init;
+	data->bsp_priv = eqos;
+	data->sph_disable = 1;
+
+	err = tegra_eqos_init(pdev, eqos);
+	if (err < 0)
+		goto reset;
+
+	return 0;
+reset:
+	reset_control_assert(eqos->rst);
+reset_phy:
+	gpiod_set_value(eqos->reset, 1);
+disable_tx:
+	clk_disable_unprepare(eqos->clk_tx);
+disable_rx:
+	clk_disable_unprepare(eqos->clk_rx);
+disable_slave:
+	clk_disable_unprepare(eqos->clk_slave);
+disable_master:
+	clk_disable_unprepare(eqos->clk_master);
+error:
+	return err;
+}
+
+static int tegra_eqos_remove(struct platform_device *pdev)
+{
+	struct tegra_eqos *eqos = get_stmmac_bsp_priv(&pdev->dev);
+
+	reset_control_assert(eqos->rst);
+	gpiod_set_value(eqos->reset, 1);
+	clk_disable_unprepare(eqos->clk_tx);
+	clk_disable_unprepare(eqos->clk_rx);
+	clk_disable_unprepare(eqos->clk_slave);
+	clk_disable_unprepare(eqos->clk_master);
+
+	return 0;
+}
+
+struct dwc_eth_dwmac_data {
+	int (*probe)(struct platform_device *pdev,
+		     struct plat_stmmacenet_data *data,
+		     struct stmmac_resources *res);
+	int (*remove)(struct platform_device *pdev);
+};
+
+static const struct dwc_eth_dwmac_data dwc_qos_data = {
+	.probe = dwc_qos_probe,
+	.remove = dwc_qos_remove,
+};
+
+static const struct dwc_eth_dwmac_data tegra_eqos_data = {
+	.probe = tegra_eqos_probe,
+	.remove = tegra_eqos_remove,
+};
+
+static int dwc_eth_dwmac_probe(struct platform_device *pdev)
+{
+	const struct dwc_eth_dwmac_data *data;
+	struct plat_stmmacenet_data *plat_dat;
+	struct stmmac_resources stmmac_res;
+	int ret;
+
+	data = device_get_match_data(&pdev->dev);
+
+	memset(&stmmac_res, 0, sizeof(struct stmmac_resources));
+
+	/**
+	 * Since stmmac_platform supports name IRQ only, basic platform
+	 * resource initialization is done in the glue logic.
+	 */
+	stmmac_res.irq = platform_get_irq(pdev, 0);
+	if (stmmac_res.irq < 0)
+		return stmmac_res.irq;
+	stmmac_res.wol_irq = stmmac_res.irq;
+
+	stmmac_res.addr = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(stmmac_res.addr))
+		return PTR_ERR(stmmac_res.addr);
+
+	plat_dat = stmmac_probe_config_dt(pdev, stmmac_res.mac);
+	if (IS_ERR(plat_dat))
+		return PTR_ERR(plat_dat);
+
+	ret = data->probe(pdev, plat_dat, &stmmac_res);
+	if (ret < 0) {
+		dev_err_probe(&pdev->dev, ret, "failed to probe subdriver\n");
+
+		goto remove_config;
+	}
+
+	ret = dwc_eth_dwmac_config_dt(pdev, plat_dat);
+	if (ret)
+		goto remove;
+
+	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
+	if (ret)
+		goto remove;
+
+	return ret;
+
+remove:
+	data->remove(pdev);
+remove_config:
+	stmmac_remove_config_dt(pdev, plat_dat);
+
+	return ret;
+}
+
+static int dwc_eth_dwmac_remove(struct platform_device *pdev)
+{
+	struct net_device *ndev = platform_get_drvdata(pdev);
+	struct stmmac_priv *priv = netdev_priv(ndev);
+	const struct dwc_eth_dwmac_data *data;
+	int err;
+
+	data = device_get_match_data(&pdev->dev);
+
+	err = stmmac_dvr_remove(&pdev->dev);
+	if (err < 0)
+		dev_err(&pdev->dev, "failed to remove platform: %d\n", err);
+
+	err = data->remove(pdev);
+	if (err < 0)
+		dev_err(&pdev->dev, "failed to remove subdriver: %d\n", err);
+
+	stmmac_remove_config_dt(pdev, priv->plat);
+
+	return err;
+}
+
+static const struct of_device_id dwc_eth_dwmac_match[] = {
+	{ .compatible = "snps,dwc-qos-ethernet-4.10", .data = &dwc_qos_data },
+	{ .compatible = "nvidia,tegra186-eqos", .data = &tegra_eqos_data },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, dwc_eth_dwmac_match);
+
+static struct platform_driver dwc_eth_dwmac_driver = {
+	.probe  = dwc_eth_dwmac_probe,
+	.remove = dwc_eth_dwmac_remove,
+	.driver = {
+		.name           = "dwc-eth-dwmac",
+		.pm             = &stmmac_pltfr_pm_ops,
+		.of_match_table = dwc_eth_dwmac_match,
+	},
+};
+module_platform_driver(dwc_eth_dwmac_driver);
+
+MODULE_AUTHOR("Joao Pinto <jpinto@synopsys.com>");
+MODULE_DESCRIPTION("Synopsys DWC Ethernet Quality-of-Service v4.10a driver");
+MODULE_LICENSE("GPL v2");