Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

8 files changed, 2722 insertions, 0 deletions

diff --git a/drivers/net/pcs/Kconfig b/drivers/net/pcs/Kconfig
new file mode 100644
index 000000000..6e7e6c346
--- /dev/null
+++ b/drivers/net/pcs/Kconfig
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# PCS Layer Configuration
+#
+
+menu "PCS device drivers"
+
+config PCS_XPCS
+	tristate
+	select PHYLINK
+	help
+	  This module provides helper functions for Synopsys DesignWare XPCS
+	  controllers.
+
+config PCS_LYNX
+	tristate
+	help
+	  This module provides helpers to phylink for managing the Lynx PCS
+	  which is part of the Layerscape and QorIQ Ethernet SERDES.
+
+config PCS_RZN1_MIIC
+	tristate "Renesas RZ/N1 MII converter"
+	depends on OF && (ARCH_RZN1 || COMPILE_TEST)
+	help
+	  This module provides a driver for the MII converter that is available
+	  on RZ/N1 SoCs. This PCS converts MII to RMII/RGMII or can be set in
+	  pass-through mode for MII.
+
+config PCS_ALTERA_TSE
+	tristate
+	help
+	  This module provides helper functions for the Altera Triple Speed
+	  Ethernet SGMII PCS, that can be found on the Intel Socfpga family.
+
+endmenu
diff --git a/drivers/net/pcs/Makefile b/drivers/net/pcs/Makefile
new file mode 100644
index 000000000..4c780d8f2
--- /dev/null
+++ b/drivers/net/pcs/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+# Makefile for Linux PCS drivers
+
+pcs_xpcs-$(CONFIG_PCS_XPCS)	:= pcs-xpcs.o pcs-xpcs-nxp.o
+
+obj-$(CONFIG_PCS_XPCS)		+= pcs_xpcs.o
+obj-$(CONFIG_PCS_LYNX)		+= pcs-lynx.o
+obj-$(CONFIG_PCS_RZN1_MIIC)	+= pcs-rzn1-miic.o
+obj-$(CONFIG_PCS_ALTERA_TSE)	+= pcs-altera-tse.o
diff --git a/drivers/net/pcs/pcs-altera-tse.c b/drivers/net/pcs/pcs-altera-tse.c
new file mode 100644
index 000000000..97a7cabff
--- /dev/null
+++ b/drivers/net/pcs/pcs-altera-tse.c
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022 Bootlin
+ *
+ * Maxime Chevallier <maxime.chevallier@bootlin.com>
+ */
+
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+#include <linux/phylink.h>
+#include <linux/pcs-altera-tse.h>
+
+/* SGMII PCS register addresses
+ */
+#define SGMII_PCS_SCRATCH	0x10
+#define SGMII_PCS_REV		0x11
+#define SGMII_PCS_LINK_TIMER_0	0x12
+#define   SGMII_PCS_LINK_TIMER_REG(x)		(0x12 + (x))
+#define SGMII_PCS_LINK_TIMER_1	0x13
+#define SGMII_PCS_IF_MODE	0x14
+#define   PCS_IF_MODE_SGMII_ENA		BIT(0)
+#define   PCS_IF_MODE_USE_SGMII_AN	BIT(1)
+#define   PCS_IF_MODE_SGMI_SPEED_MASK	GENMASK(3, 2)
+#define   PCS_IF_MODE_SGMI_SPEED_10	(0 << 2)
+#define   PCS_IF_MODE_SGMI_SPEED_100	(1 << 2)
+#define   PCS_IF_MODE_SGMI_SPEED_1000	(2 << 2)
+#define   PCS_IF_MODE_SGMI_HALF_DUPLEX	BIT(4)
+#define   PCS_IF_MODE_SGMI_PHY_AN	BIT(5)
+#define SGMII_PCS_DIS_READ_TO	0x15
+#define SGMII_PCS_READ_TO	0x16
+#define SGMII_PCS_SW_RESET_TIMEOUT 100 /* usecs */
+
+struct altera_tse_pcs {
+	struct phylink_pcs pcs;
+	void __iomem *base;
+	int reg_width;
+};
+
+static struct altera_tse_pcs *phylink_pcs_to_tse_pcs(struct phylink_pcs *pcs)
+{
+	return container_of(pcs, struct altera_tse_pcs, pcs);
+}
+
+static u16 tse_pcs_read(struct altera_tse_pcs *tse_pcs, int regnum)
+{
+	if (tse_pcs->reg_width == 4)
+		return readl(tse_pcs->base + regnum * 4);
+	else
+		return readw(tse_pcs->base + regnum * 2);
+}
+
+static void tse_pcs_write(struct altera_tse_pcs *tse_pcs, int regnum,
+			  u16 value)
+{
+	if (tse_pcs->reg_width == 4)
+		writel(value, tse_pcs->base + regnum * 4);
+	else
+		writew(value, tse_pcs->base + regnum * 2);
+}
+
+static int tse_pcs_reset(struct altera_tse_pcs *tse_pcs)
+{
+	int i = 0;
+	u16 bmcr;
+
+	/* Reset PCS block */
+	bmcr = tse_pcs_read(tse_pcs, MII_BMCR);
+	bmcr |= BMCR_RESET;
+	tse_pcs_write(tse_pcs, MII_BMCR, bmcr);
+
+	for (i = 0; i < SGMII_PCS_SW_RESET_TIMEOUT; i++) {
+		if (!(tse_pcs_read(tse_pcs, MII_BMCR) & BMCR_RESET))
+			return 0;
+		udelay(1);
+	}
+
+	return -ETIMEDOUT;
+}
+
+static int alt_tse_pcs_validate(struct phylink_pcs *pcs,
+				unsigned long *supported,
+				const struct phylink_link_state *state)
+{
+	if (state->interface == PHY_INTERFACE_MODE_SGMII ||
+	    state->interface == PHY_INTERFACE_MODE_1000BASEX)
+		return 1;
+
+	return -EINVAL;
+}
+
+static int alt_tse_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
+			      phy_interface_t interface,
+			      const unsigned long *advertising,
+			      bool permit_pause_to_mac)
+{
+	struct altera_tse_pcs *tse_pcs = phylink_pcs_to_tse_pcs(pcs);
+	u32 ctrl, if_mode;
+
+	ctrl = tse_pcs_read(tse_pcs, MII_BMCR);
+	if_mode = tse_pcs_read(tse_pcs, SGMII_PCS_IF_MODE);
+
+	/* Set link timer to 1.6ms, as per the MegaCore Function User Guide */
+	tse_pcs_write(tse_pcs, SGMII_PCS_LINK_TIMER_0, 0x0D40);
+	tse_pcs_write(tse_pcs, SGMII_PCS_LINK_TIMER_1, 0x03);
+
+	if (interface == PHY_INTERFACE_MODE_SGMII) {
+		if_mode |= PCS_IF_MODE_USE_SGMII_AN | PCS_IF_MODE_SGMII_ENA;
+	} else if (interface == PHY_INTERFACE_MODE_1000BASEX) {
+		if_mode &= ~(PCS_IF_MODE_USE_SGMII_AN | PCS_IF_MODE_SGMII_ENA);
+		if_mode |= PCS_IF_MODE_SGMI_SPEED_1000;
+	}
+
+	ctrl |= (BMCR_SPEED1000 | BMCR_FULLDPLX | BMCR_ANENABLE);
+
+	tse_pcs_write(tse_pcs, MII_BMCR, ctrl);
+	tse_pcs_write(tse_pcs, SGMII_PCS_IF_MODE, if_mode);
+
+	return tse_pcs_reset(tse_pcs);
+}
+
+static void alt_tse_pcs_get_state(struct phylink_pcs *pcs,
+				  struct phylink_link_state *state)
+{
+	struct altera_tse_pcs *tse_pcs = phylink_pcs_to_tse_pcs(pcs);
+	u16 bmsr, lpa;
+
+	bmsr = tse_pcs_read(tse_pcs, MII_BMSR);
+	lpa = tse_pcs_read(tse_pcs, MII_LPA);
+
+	phylink_mii_c22_pcs_decode_state(state, bmsr, lpa);
+}
+
+static void alt_tse_pcs_an_restart(struct phylink_pcs *pcs)
+{
+	struct altera_tse_pcs *tse_pcs = phylink_pcs_to_tse_pcs(pcs);
+	u16 bmcr;
+
+	bmcr = tse_pcs_read(tse_pcs, MII_BMCR);
+	bmcr |= BMCR_ANRESTART;
+	tse_pcs_write(tse_pcs, MII_BMCR, bmcr);
+
+	/* This PCS seems to require a soft reset to re-sync the AN logic */
+	tse_pcs_reset(tse_pcs);
+}
+
+static const struct phylink_pcs_ops alt_tse_pcs_ops = {
+	.pcs_validate = alt_tse_pcs_validate,
+	.pcs_get_state = alt_tse_pcs_get_state,
+	.pcs_config = alt_tse_pcs_config,
+	.pcs_an_restart = alt_tse_pcs_an_restart,
+};
+
+struct phylink_pcs *alt_tse_pcs_create(struct net_device *ndev,
+				       void __iomem *pcs_base, int reg_width)
+{
+	struct altera_tse_pcs *tse_pcs;
+
+	if (reg_width != 4 && reg_width != 2)
+		return ERR_PTR(-EINVAL);
+
+	tse_pcs = devm_kzalloc(&ndev->dev, sizeof(*tse_pcs), GFP_KERNEL);
+	if (!tse_pcs)
+		return ERR_PTR(-ENOMEM);
+
+	tse_pcs->pcs.ops = &alt_tse_pcs_ops;
+	tse_pcs->base = pcs_base;
+	tse_pcs->reg_width = reg_width;
+
+	return &tse_pcs->pcs;
+}
+EXPORT_SYMBOL_GPL(alt_tse_pcs_create);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Altera TSE PCS driver");
+MODULE_AUTHOR("Maxime Chevallier <maxime.chevallier@bootlin.com>");
diff --git a/drivers/net/pcs/pcs-lynx.c b/drivers/net/pcs/pcs-lynx.c
new file mode 100644
index 000000000..7d5fc7f54
--- /dev/null
+++ b/drivers/net/pcs/pcs-lynx.c
@@ -0,0 +1,346 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/* Copyright 2020 NXP
+ * Lynx PCS MDIO helpers
+ */
+
+#include <linux/mdio.h>
+#include <linux/phylink.h>
+#include <linux/pcs-lynx.h>
+
+#define SGMII_CLOCK_PERIOD_NS		8 /* PCS is clocked at 125 MHz */
+#define LINK_TIMER_VAL(ns)		((u32)((ns) / SGMII_CLOCK_PERIOD_NS))
+
+#define SGMII_AN_LINK_TIMER_NS		1600000 /* defined by SGMII spec */
+#define IEEE8023_LINK_TIMER_NS		10000000
+
+#define LINK_TIMER_LO			0x12
+#define LINK_TIMER_HI			0x13
+#define IF_MODE				0x14
+#define IF_MODE_SGMII_EN		BIT(0)
+#define IF_MODE_USE_SGMII_AN		BIT(1)
+#define IF_MODE_SPEED(x)		(((x) << 2) & GENMASK(3, 2))
+#define IF_MODE_SPEED_MSK		GENMASK(3, 2)
+#define IF_MODE_HALF_DUPLEX		BIT(4)
+
+struct lynx_pcs {
+	struct phylink_pcs pcs;
+	struct mdio_device *mdio;
+};
+
+enum sgmii_speed {
+	SGMII_SPEED_10		= 0,
+	SGMII_SPEED_100		= 1,
+	SGMII_SPEED_1000	= 2,
+	SGMII_SPEED_2500	= 2,
+};
+
+#define phylink_pcs_to_lynx(pl_pcs) container_of((pl_pcs), struct lynx_pcs, pcs)
+#define lynx_to_phylink_pcs(lynx) (&(lynx)->pcs)
+
+struct mdio_device *lynx_get_mdio_device(struct phylink_pcs *pcs)
+{
+	struct lynx_pcs *lynx = phylink_pcs_to_lynx(pcs);
+
+	return lynx->mdio;
+}
+EXPORT_SYMBOL(lynx_get_mdio_device);
+
+static void lynx_pcs_get_state_usxgmii(struct mdio_device *pcs,
+				       struct phylink_link_state *state)
+{
+	struct mii_bus *bus = pcs->bus;
+	int addr = pcs->addr;
+	int status, lpa;
+
+	status = mdiobus_c45_read(bus, addr, MDIO_MMD_VEND2, MII_BMSR);
+	if (status < 0)
+		return;
+
+	state->link = !!(status & MDIO_STAT1_LSTATUS);
+	state->an_complete = !!(status & MDIO_AN_STAT1_COMPLETE);
+	if (!state->link || !state->an_complete)
+		return;
+
+	lpa = mdiobus_c45_read(bus, addr, MDIO_MMD_VEND2, MII_LPA);
+	if (lpa < 0)
+		return;
+
+	phylink_decode_usxgmii_word(state, lpa);
+}
+
+static void lynx_pcs_get_state_2500basex(struct mdio_device *pcs,
+					 struct phylink_link_state *state)
+{
+	int bmsr, lpa;
+
+	bmsr = mdiodev_read(pcs, MII_BMSR);
+	lpa = mdiodev_read(pcs, MII_LPA);
+	if (bmsr < 0 || lpa < 0) {
+		state->link = false;
+		return;
+	}
+
+	state->link = !!(bmsr & BMSR_LSTATUS);
+	state->an_complete = !!(bmsr & BMSR_ANEGCOMPLETE);
+	if (!state->link)
+		return;
+
+	state->speed = SPEED_2500;
+	state->pause |= MLO_PAUSE_TX | MLO_PAUSE_RX;
+	state->duplex = DUPLEX_FULL;
+}
+
+static void lynx_pcs_get_state(struct phylink_pcs *pcs,
+			       struct phylink_link_state *state)
+{
+	struct lynx_pcs *lynx = phylink_pcs_to_lynx(pcs);
+
+	switch (state->interface) {
+	case PHY_INTERFACE_MODE_1000BASEX:
+	case PHY_INTERFACE_MODE_SGMII:
+	case PHY_INTERFACE_MODE_QSGMII:
+		phylink_mii_c22_pcs_get_state(lynx->mdio, state);
+		break;
+	case PHY_INTERFACE_MODE_2500BASEX:
+		lynx_pcs_get_state_2500basex(lynx->mdio, state);
+		break;
+	case PHY_INTERFACE_MODE_USXGMII:
+		lynx_pcs_get_state_usxgmii(lynx->mdio, state);
+		break;
+	case PHY_INTERFACE_MODE_10GBASER:
+		phylink_mii_c45_pcs_get_state(lynx->mdio, state);
+		break;
+	default:
+		break;
+	}
+
+	dev_dbg(&lynx->mdio->dev,
+		"mode=%s/%s/%s link=%u an_enabled=%u an_complete=%u\n",
+		phy_modes(state->interface),
+		phy_speed_to_str(state->speed),
+		phy_duplex_to_str(state->duplex),
+		state->link, state->an_enabled, state->an_complete);
+}
+
+static int lynx_pcs_config_giga(struct mdio_device *pcs, unsigned int mode,
+				phy_interface_t interface,
+				const unsigned long *advertising)
+{
+	u32 link_timer;
+	u16 if_mode;
+	int err;
+
+	if (interface == PHY_INTERFACE_MODE_1000BASEX) {
+		link_timer = LINK_TIMER_VAL(IEEE8023_LINK_TIMER_NS);
+		mdiodev_write(pcs, LINK_TIMER_LO, link_timer & 0xffff);
+		mdiodev_write(pcs, LINK_TIMER_HI, link_timer >> 16);
+
+		if_mode = 0;
+	} else {
+		if_mode = IF_MODE_SGMII_EN;
+		if (mode == MLO_AN_INBAND) {
+			if_mode |= IF_MODE_USE_SGMII_AN;
+
+			/* Adjust link timer for SGMII */
+			link_timer = LINK_TIMER_VAL(SGMII_AN_LINK_TIMER_NS);
+			mdiodev_write(pcs, LINK_TIMER_LO, link_timer & 0xffff);
+			mdiodev_write(pcs, LINK_TIMER_HI, link_timer >> 16);
+		}
+	}
+
+	err = mdiodev_modify(pcs, IF_MODE,
+			     IF_MODE_SGMII_EN | IF_MODE_USE_SGMII_AN,
+			     if_mode);
+	if (err)
+		return err;
+
+	return phylink_mii_c22_pcs_config(pcs, mode, interface, advertising);
+}
+
+static int lynx_pcs_config_usxgmii(struct mdio_device *pcs, unsigned int mode,
+				   const unsigned long *advertising)
+{
+	struct mii_bus *bus = pcs->bus;
+	int addr = pcs->addr;
+
+	if (!phylink_autoneg_inband(mode)) {
+		dev_err(&pcs->dev, "USXGMII only supports in-band AN for now\n");
+		return -EOPNOTSUPP;
+	}
+
+	/* Configure device ability for the USXGMII Replicator */
+	return mdiobus_c45_write(bus, addr, MDIO_MMD_VEND2, MII_ADVERTISE,
+				 MDIO_USXGMII_10G | MDIO_USXGMII_LINK |
+				 MDIO_USXGMII_FULL_DUPLEX |
+				 ADVERTISE_SGMII | ADVERTISE_LPACK);
+}
+
+static int lynx_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
+			   phy_interface_t ifmode,
+			   const unsigned long *advertising,
+			   bool permit)
+{
+	struct lynx_pcs *lynx = phylink_pcs_to_lynx(pcs);
+
+	switch (ifmode) {
+	case PHY_INTERFACE_MODE_1000BASEX:
+	case PHY_INTERFACE_MODE_SGMII:
+	case PHY_INTERFACE_MODE_QSGMII:
+		return lynx_pcs_config_giga(lynx->mdio, mode, ifmode,
+					    advertising);
+	case PHY_INTERFACE_MODE_2500BASEX:
+		if (phylink_autoneg_inband(mode)) {
+			dev_err(&lynx->mdio->dev,
+				"AN not supported on 3.125GHz SerDes lane\n");
+			return -EOPNOTSUPP;
+		}
+		break;
+	case PHY_INTERFACE_MODE_USXGMII:
+		return lynx_pcs_config_usxgmii(lynx->mdio, mode, advertising);
+	case PHY_INTERFACE_MODE_10GBASER:
+		/* Nothing to do here for 10GBASER */
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+static void lynx_pcs_an_restart(struct phylink_pcs *pcs)
+{
+	struct lynx_pcs *lynx = phylink_pcs_to_lynx(pcs);
+
+	phylink_mii_c22_pcs_an_restart(lynx->mdio);
+}
+
+static void lynx_pcs_link_up_sgmii(struct mdio_device *pcs, unsigned int mode,
+				   int speed, int duplex)
+{
+	u16 if_mode = 0, sgmii_speed;
+
+	/* The PCS needs to be configured manually only
+	 * when not operating on in-band mode
+	 */
+	if (mode == MLO_AN_INBAND)
+		return;
+
+	if (duplex == DUPLEX_HALF)
+		if_mode |= IF_MODE_HALF_DUPLEX;
+
+	switch (speed) {
+	case SPEED_1000:
+		sgmii_speed = SGMII_SPEED_1000;
+		break;
+	case SPEED_100:
+		sgmii_speed = SGMII_SPEED_100;
+		break;
+	case SPEED_10:
+		sgmii_speed = SGMII_SPEED_10;
+		break;
+	case SPEED_UNKNOWN:
+		/* Silently don't do anything */
+		return;
+	default:
+		dev_err(&pcs->dev, "Invalid PCS speed %d\n", speed);
+		return;
+	}
+	if_mode |= IF_MODE_SPEED(sgmii_speed);
+
+	mdiodev_modify(pcs, IF_MODE,
+		       IF_MODE_HALF_DUPLEX | IF_MODE_SPEED_MSK,
+		       if_mode);
+}
+
+/* 2500Base-X is SerDes protocol 7 on Felix and 6 on ENETC. It is a SerDes lane
+ * clocked at 3.125 GHz which encodes symbols with 8b/10b and does not have
+ * auto-negotiation of any link parameters. Electrically it is compatible with
+ * a single lane of XAUI.
+ * The hardware reference manual wants to call this mode SGMII, but it isn't
+ * really, since the fundamental features of SGMII:
+ * - Downgrading the link speed by duplicating symbols
+ * - Auto-negotiation
+ * are not there.
+ * The speed is configured at 1000 in the IF_MODE because the clock frequency
+ * is actually given by a PLL configured in the Reset Configuration Word (RCW).
+ * Since there is no difference between fixed speed SGMII w/o AN and 802.3z w/o
+ * AN, we call this PHY interface type 2500Base-X. In case a PHY negotiates a
+ * lower link speed on line side, the system-side interface remains fixed at
+ * 2500 Mbps and we do rate adaptation through pause frames.
+ */
+static void lynx_pcs_link_up_2500basex(struct mdio_device *pcs,
+				       unsigned int mode,
+				       int speed, int duplex)
+{
+	u16 if_mode = 0;
+
+	if (mode == MLO_AN_INBAND) {
+		dev_err(&pcs->dev, "AN not supported for 2500BaseX\n");
+		return;
+	}
+
+	if (duplex == DUPLEX_HALF)
+		if_mode |= IF_MODE_HALF_DUPLEX;
+	if_mode |= IF_MODE_SPEED(SGMII_SPEED_2500);
+
+	mdiodev_modify(pcs, IF_MODE,
+		       IF_MODE_HALF_DUPLEX | IF_MODE_SPEED_MSK,
+		       if_mode);
+}
+
+static void lynx_pcs_link_up(struct phylink_pcs *pcs, unsigned int mode,
+			     phy_interface_t interface,
+			     int speed, int duplex)
+{
+	struct lynx_pcs *lynx = phylink_pcs_to_lynx(pcs);
+
+	switch (interface) {
+	case PHY_INTERFACE_MODE_SGMII:
+	case PHY_INTERFACE_MODE_QSGMII:
+		lynx_pcs_link_up_sgmii(lynx->mdio, mode, speed, duplex);
+		break;
+	case PHY_INTERFACE_MODE_2500BASEX:
+		lynx_pcs_link_up_2500basex(lynx->mdio, mode, speed, duplex);
+		break;
+	case PHY_INTERFACE_MODE_USXGMII:
+		/* At the moment, only in-band AN is supported for USXGMII
+		 * so nothing to do in link_up
+		 */
+		break;
+	default:
+		break;
+	}
+}
+
+static const struct phylink_pcs_ops lynx_pcs_phylink_ops = {
+	.pcs_get_state = lynx_pcs_get_state,
+	.pcs_config = lynx_pcs_config,
+	.pcs_an_restart = lynx_pcs_an_restart,
+	.pcs_link_up = lynx_pcs_link_up,
+};
+
+struct phylink_pcs *lynx_pcs_create(struct mdio_device *mdio)
+{
+	struct lynx_pcs *lynx;
+
+	lynx = kzalloc(sizeof(*lynx), GFP_KERNEL);
+	if (!lynx)
+		return NULL;
+
+	lynx->mdio = mdio;
+	lynx->pcs.ops = &lynx_pcs_phylink_ops;
+	lynx->pcs.poll = true;
+
+	return lynx_to_phylink_pcs(lynx);
+}
+EXPORT_SYMBOL(lynx_pcs_create);
+
+void lynx_pcs_destroy(struct phylink_pcs *pcs)
+{
+	struct lynx_pcs *lynx = phylink_pcs_to_lynx(pcs);
+
+	kfree(lynx);
+}
+EXPORT_SYMBOL(lynx_pcs_destroy);
+
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/net/pcs/pcs-rzn1-miic.c b/drivers/net/pcs/pcs-rzn1-miic.c
new file mode 100644
index 000000000..847ab37f1
--- /dev/null
+++ b/drivers/net/pcs/pcs-rzn1-miic.c
@@ -0,0 +1,537 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022 Schneider Electric
+ *
+ * Clément Léger <clement.leger@bootlin.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/mdio.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/pcs-rzn1-miic.h>
+#include <linux/phylink.h>
+#include <linux/pm_runtime.h>
+#include <dt-bindings/net/pcs-rzn1-miic.h>
+
+#define MIIC_PRCMD			0x0
+#define MIIC_ESID_CODE			0x4
+
+#define MIIC_MODCTRL			0x20
+#define MIIC_MODCTRL_SW_MODE		GENMASK(4, 0)
+
+#define MIIC_CONVCTRL(port)		(0x100 + (port) * 4)
+
+#define MIIC_CONVCTRL_CONV_SPEED	GENMASK(1, 0)
+#define CONV_MODE_10MBPS		0
+#define CONV_MODE_100MBPS		1
+#define CONV_MODE_1000MBPS		2
+
+#define MIIC_CONVCTRL_CONV_MODE		GENMASK(3, 2)
+#define CONV_MODE_MII			0
+#define CONV_MODE_RMII			1
+#define CONV_MODE_RGMII			2
+
+#define MIIC_CONVCTRL_FULLD		BIT(8)
+#define MIIC_CONVCTRL_RGMII_LINK	BIT(12)
+#define MIIC_CONVCTRL_RGMII_DUPLEX	BIT(13)
+#define MIIC_CONVCTRL_RGMII_SPEED	GENMASK(15, 14)
+
+#define MIIC_CONVRST			0x114
+#define MIIC_CONVRST_PHYIF_RST(port)	BIT(port)
+#define MIIC_CONVRST_PHYIF_RST_MASK	GENMASK(4, 0)
+
+#define MIIC_SWCTRL			0x304
+#define MIIC_SWDUPC			0x308
+
+#define MIIC_MAX_NR_PORTS		5
+
+#define MIIC_MODCTRL_CONF_CONV_NUM	6
+#define MIIC_MODCTRL_CONF_NONE		-1
+
+/**
+ * struct modctrl_match - Matching table entry for  convctrl configuration
+ *			  See section 8.2.1 of manual.
+ * @mode_cfg: Configuration value for convctrl
+ * @conv: Configuration of ethernet port muxes. First index is SWITCH_PORTIN,
+ *	  then index 1 - 5 are CONV1 - CONV5.
+ */
+struct modctrl_match {
+	u32 mode_cfg;
+	u8 conv[MIIC_MODCTRL_CONF_CONV_NUM];
+};
+
+static struct modctrl_match modctrl_match_table[] = {
+	{0x0, {MIIC_RTOS_PORT, MIIC_GMAC1_PORT, MIIC_SWITCH_PORTD,
+	       MIIC_SWITCH_PORTC, MIIC_SERCOS_PORTB, MIIC_SERCOS_PORTA}},
+	{0x1, {MIIC_RTOS_PORT, MIIC_GMAC1_PORT, MIIC_SWITCH_PORTD,
+	       MIIC_SWITCH_PORTC, MIIC_ETHERCAT_PORTB, MIIC_ETHERCAT_PORTA}},
+	{0x2, {MIIC_RTOS_PORT, MIIC_GMAC1_PORT, MIIC_SWITCH_PORTD,
+	       MIIC_ETHERCAT_PORTC, MIIC_ETHERCAT_PORTB, MIIC_ETHERCAT_PORTA}},
+	{0x3, {MIIC_RTOS_PORT, MIIC_GMAC1_PORT, MIIC_SWITCH_PORTD,
+	       MIIC_SWITCH_PORTC, MIIC_SWITCH_PORTB, MIIC_SWITCH_PORTA}},
+
+	{0x8, {MIIC_RTOS_PORT, MIIC_GMAC1_PORT, MIIC_SWITCH_PORTD,
+	       MIIC_SWITCH_PORTC, MIIC_SERCOS_PORTB, MIIC_SERCOS_PORTA}},
+	{0x9, {MIIC_RTOS_PORT, MIIC_GMAC1_PORT, MIIC_SWITCH_PORTD,
+	       MIIC_SWITCH_PORTC, MIIC_ETHERCAT_PORTB, MIIC_ETHERCAT_PORTA}},
+	{0xA, {MIIC_RTOS_PORT, MIIC_GMAC1_PORT, MIIC_SWITCH_PORTD,
+	       MIIC_ETHERCAT_PORTC, MIIC_ETHERCAT_PORTB, MIIC_ETHERCAT_PORTA}},
+	{0xB, {MIIC_RTOS_PORT, MIIC_GMAC1_PORT, MIIC_SWITCH_PORTD,
+	       MIIC_SWITCH_PORTC, MIIC_SWITCH_PORTB, MIIC_SWITCH_PORTA}},
+
+	{0x10, {MIIC_GMAC2_PORT, MIIC_GMAC1_PORT, MIIC_SWITCH_PORTD,
+		MIIC_SWITCH_PORTC, MIIC_SERCOS_PORTB, MIIC_SERCOS_PORTA}},
+	{0x11, {MIIC_GMAC2_PORT, MIIC_GMAC1_PORT, MIIC_SWITCH_PORTD,
+		MIIC_SWITCH_PORTC, MIIC_ETHERCAT_PORTB, MIIC_ETHERCAT_PORTA}},
+	{0x12, {MIIC_GMAC2_PORT, MIIC_GMAC1_PORT, MIIC_SWITCH_PORTD,
+		MIIC_ETHERCAT_PORTC, MIIC_ETHERCAT_PORTB, MIIC_ETHERCAT_PORTA}},
+	{0x13, {MIIC_GMAC2_PORT, MIIC_GMAC1_PORT, MIIC_SWITCH_PORTD,
+		MIIC_SWITCH_PORTC, MIIC_SWITCH_PORTB, MIIC_SWITCH_PORTA}}
+};
+
+static const char * const conf_to_string[] = {
+	[MIIC_GMAC1_PORT]	= "GMAC1_PORT",
+	[MIIC_GMAC2_PORT]	= "GMAC2_PORT",
+	[MIIC_RTOS_PORT]	= "RTOS_PORT",
+	[MIIC_SERCOS_PORTA]	= "SERCOS_PORTA",
+	[MIIC_SERCOS_PORTB]	= "SERCOS_PORTB",
+	[MIIC_ETHERCAT_PORTA]	= "ETHERCAT_PORTA",
+	[MIIC_ETHERCAT_PORTB]	= "ETHERCAT_PORTB",
+	[MIIC_ETHERCAT_PORTC]	= "ETHERCAT_PORTC",
+	[MIIC_SWITCH_PORTA]	= "SWITCH_PORTA",
+	[MIIC_SWITCH_PORTB]	= "SWITCH_PORTB",
+	[MIIC_SWITCH_PORTC]	= "SWITCH_PORTC",
+	[MIIC_SWITCH_PORTD]	= "SWITCH_PORTD",
+	[MIIC_HSR_PORTA]	= "HSR_PORTA",
+	[MIIC_HSR_PORTB]	= "HSR_PORTB",
+};
+
+static const char *index_to_string[MIIC_MODCTRL_CONF_CONV_NUM] = {
+	"SWITCH_PORTIN",
+	"CONV1",
+	"CONV2",
+	"CONV3",
+	"CONV4",
+	"CONV5",
+};
+
+/**
+ * struct miic - MII converter structure
+ * @base: base address of the MII converter
+ * @dev: Device associated to the MII converter
+ * @clks: Clocks used for this device
+ * @nclk: Number of clocks
+ * @lock: Lock used for read-modify-write access
+ */
+struct miic {
+	void __iomem *base;
+	struct device *dev;
+	struct clk_bulk_data *clks;
+	int nclk;
+	spinlock_t lock;
+};
+
+/**
+ * struct miic_port - Per port MII converter struct
+ * @miic: backiling to MII converter structure
+ * @pcs: PCS structure associated to the port
+ * @port: port number
+ * @interface: interface mode of the port
+ */
+struct miic_port {
+	struct miic *miic;
+	struct phylink_pcs pcs;
+	int port;
+	phy_interface_t interface;
+};
+
+static struct miic_port *phylink_pcs_to_miic_port(struct phylink_pcs *pcs)
+{
+	return container_of(pcs, struct miic_port, pcs);
+}
+
+static void miic_reg_writel(struct miic *miic, int offset, u32 value)
+{
+	writel(value, miic->base + offset);
+}
+
+static u32 miic_reg_readl(struct miic *miic, int offset)
+{
+	return readl(miic->base + offset);
+}
+
+static void miic_reg_rmw(struct miic *miic, int offset, u32 mask, u32 val)
+{
+	u32 reg;
+
+	spin_lock(&miic->lock);
+
+	reg = miic_reg_readl(miic, offset);
+	reg &= ~mask;
+	reg |= val;
+	miic_reg_writel(miic, offset, reg);
+
+	spin_unlock(&miic->lock);
+}
+
+static void miic_converter_enable(struct miic *miic, int port, int enable)
+{
+	u32 val = 0;
+
+	if (enable)
+		val = MIIC_CONVRST_PHYIF_RST(port);
+
+	miic_reg_rmw(miic, MIIC_CONVRST, MIIC_CONVRST_PHYIF_RST(port), val);
+}
+
+static int miic_config(struct phylink_pcs *pcs, unsigned int mode,
+		       phy_interface_t interface,
+		       const unsigned long *advertising, bool permit)
+{
+	struct miic_port *miic_port = phylink_pcs_to_miic_port(pcs);
+	struct miic *miic = miic_port->miic;
+	u32 speed, conv_mode, val, mask;
+	int port = miic_port->port;
+
+	switch (interface) {
+	case PHY_INTERFACE_MODE_RMII:
+		conv_mode = CONV_MODE_RMII;
+		speed = CONV_MODE_100MBPS;
+		break;
+	case PHY_INTERFACE_MODE_RGMII:
+	case PHY_INTERFACE_MODE_RGMII_ID:
+	case PHY_INTERFACE_MODE_RGMII_TXID:
+	case PHY_INTERFACE_MODE_RGMII_RXID:
+		conv_mode = CONV_MODE_RGMII;
+		speed = CONV_MODE_1000MBPS;
+		break;
+	case PHY_INTERFACE_MODE_MII:
+		conv_mode = CONV_MODE_MII;
+		/* When in MII mode, speed should be set to 0 (which is actually
+		 * CONV_MODE_10MBPS)
+		 */
+		speed = CONV_MODE_10MBPS;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	val = FIELD_PREP(MIIC_CONVCTRL_CONV_MODE, conv_mode);
+	mask = MIIC_CONVCTRL_CONV_MODE;
+
+	/* Update speed only if we are going to change the interface because
+	 * the link might already be up and it would break it if the speed is
+	 * changed.
+	 */
+	if (interface != miic_port->interface) {
+		val |= FIELD_PREP(MIIC_CONVCTRL_CONV_SPEED, speed);
+		mask |= MIIC_CONVCTRL_CONV_SPEED;
+		miic_port->interface = interface;
+	}
+
+	miic_reg_rmw(miic, MIIC_CONVCTRL(port), mask, val);
+	miic_converter_enable(miic_port->miic, miic_port->port, 1);
+
+	return 0;
+}
+
+static void miic_link_up(struct phylink_pcs *pcs, unsigned int mode,
+			 phy_interface_t interface, int speed, int duplex)
+{
+	struct miic_port *miic_port = phylink_pcs_to_miic_port(pcs);
+	struct miic *miic = miic_port->miic;
+	u32 conv_speed = 0, val = 0;
+	int port = miic_port->port;
+
+	if (duplex == DUPLEX_FULL)
+		val |= MIIC_CONVCTRL_FULLD;
+
+	/* No speed in MII through-mode */
+	if (interface != PHY_INTERFACE_MODE_MII) {
+		switch (speed) {
+		case SPEED_1000:
+			conv_speed = CONV_MODE_1000MBPS;
+			break;
+		case SPEED_100:
+			conv_speed = CONV_MODE_100MBPS;
+			break;
+		case SPEED_10:
+			conv_speed = CONV_MODE_10MBPS;
+			break;
+		default:
+			return;
+		}
+	}
+
+	val |= FIELD_PREP(MIIC_CONVCTRL_CONV_SPEED, conv_speed);
+
+	miic_reg_rmw(miic, MIIC_CONVCTRL(port),
+		     (MIIC_CONVCTRL_CONV_SPEED | MIIC_CONVCTRL_FULLD), val);
+}
+
+static int miic_validate(struct phylink_pcs *pcs, unsigned long *supported,
+			 const struct phylink_link_state *state)
+{
+	if (phy_interface_mode_is_rgmii(state->interface) ||
+	    state->interface == PHY_INTERFACE_MODE_RMII ||
+	    state->interface == PHY_INTERFACE_MODE_MII)
+		return 1;
+
+	return -EINVAL;
+}
+
+static const struct phylink_pcs_ops miic_phylink_ops = {
+	.pcs_validate = miic_validate,
+	.pcs_config = miic_config,
+	.pcs_link_up = miic_link_up,
+};
+
+struct phylink_pcs *miic_create(struct device *dev, struct device_node *np)
+{
+	struct platform_device *pdev;
+	struct miic_port *miic_port;
+	struct device_node *pcs_np;
+	struct miic *miic;
+	u32 port;
+
+	if (!of_device_is_available(np))
+		return ERR_PTR(-ENODEV);
+
+	if (of_property_read_u32(np, "reg", &port))
+		return ERR_PTR(-EINVAL);
+
+	if (port > MIIC_MAX_NR_PORTS || port < 1)
+		return ERR_PTR(-EINVAL);
+
+	/* The PCS pdev is attached to the parent node */
+	pcs_np = of_get_parent(np);
+	if (!pcs_np)
+		return ERR_PTR(-ENODEV);
+
+	if (!of_device_is_available(pcs_np)) {
+		of_node_put(pcs_np);
+		return ERR_PTR(-ENODEV);
+	}
+
+	pdev = of_find_device_by_node(pcs_np);
+	of_node_put(pcs_np);
+	if (!pdev || !platform_get_drvdata(pdev)) {
+		if (pdev)
+			put_device(&pdev->dev);
+		return ERR_PTR(-EPROBE_DEFER);
+	}
+
+	miic_port = kzalloc(sizeof(*miic_port), GFP_KERNEL);
+	if (!miic_port) {
+		put_device(&pdev->dev);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	miic = platform_get_drvdata(pdev);
+	device_link_add(dev, miic->dev, DL_FLAG_AUTOREMOVE_CONSUMER);
+	put_device(&pdev->dev);
+
+	miic_port->miic = miic;
+	miic_port->port = port - 1;
+	miic_port->pcs.ops = &miic_phylink_ops;
+
+	return &miic_port->pcs;
+}
+EXPORT_SYMBOL(miic_create);
+
+void miic_destroy(struct phylink_pcs *pcs)
+{
+	struct miic_port *miic_port = phylink_pcs_to_miic_port(pcs);
+
+	miic_converter_enable(miic_port->miic, miic_port->port, 0);
+	kfree(miic_port);
+}
+EXPORT_SYMBOL(miic_destroy);
+
+static int miic_init_hw(struct miic *miic, u32 cfg_mode)
+{
+	int port;
+
+	/* Unlock write access to accessory registers (cf datasheet). If this
+	 * is going to be used in conjunction with the Cortex-M3, this sequence
+	 * will have to be moved in register write
+	 */
+	miic_reg_writel(miic, MIIC_PRCMD, 0x00A5);
+	miic_reg_writel(miic, MIIC_PRCMD, 0x0001);
+	miic_reg_writel(miic, MIIC_PRCMD, 0xFFFE);
+	miic_reg_writel(miic, MIIC_PRCMD, 0x0001);
+
+	miic_reg_writel(miic, MIIC_MODCTRL,
+			FIELD_PREP(MIIC_MODCTRL_SW_MODE, cfg_mode));
+
+	for (port = 0; port < MIIC_MAX_NR_PORTS; port++) {
+		miic_converter_enable(miic, port, 0);
+		/* Disable speed/duplex control from these registers, datasheet
+		 * says switch registers should be used to setup switch port
+		 * speed and duplex.
+		 */
+		miic_reg_writel(miic, MIIC_SWCTRL, 0x0);
+		miic_reg_writel(miic, MIIC_SWDUPC, 0x0);
+	}
+
+	return 0;
+}
+
+static bool miic_modctrl_match(s8 table_val[MIIC_MODCTRL_CONF_CONV_NUM],
+			       s8 dt_val[MIIC_MODCTRL_CONF_CONV_NUM])
+{
+	int i;
+
+	for (i = 0; i < MIIC_MODCTRL_CONF_CONV_NUM; i++) {
+		if (dt_val[i] == MIIC_MODCTRL_CONF_NONE)
+			continue;
+
+		if (dt_val[i] != table_val[i])
+			return false;
+	}
+
+	return true;
+}
+
+static void miic_dump_conf(struct device *dev,
+			   s8 conf[MIIC_MODCTRL_CONF_CONV_NUM])
+{
+	const char *conf_name;
+	int i;
+
+	for (i = 0; i < MIIC_MODCTRL_CONF_CONV_NUM; i++) {
+		if (conf[i] != MIIC_MODCTRL_CONF_NONE)
+			conf_name = conf_to_string[conf[i]];
+		else
+			conf_name = "NONE";
+
+		dev_err(dev, "%s: %s\n", index_to_string[i], conf_name);
+	}
+}
+
+static int miic_match_dt_conf(struct device *dev,
+			      s8 dt_val[MIIC_MODCTRL_CONF_CONV_NUM],
+			      u32 *mode_cfg)
+{
+	struct modctrl_match *table_entry;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(modctrl_match_table); i++) {
+		table_entry = &modctrl_match_table[i];
+
+		if (miic_modctrl_match(table_entry->conv, dt_val)) {
+			*mode_cfg = table_entry->mode_cfg;
+			return 0;
+		}
+	}
+
+	dev_err(dev, "Failed to apply requested configuration\n");
+	miic_dump_conf(dev, dt_val);
+
+	return -EINVAL;
+}
+
+static int miic_parse_dt(struct device *dev, u32 *mode_cfg)
+{
+	s8 dt_val[MIIC_MODCTRL_CONF_CONV_NUM];
+	struct device_node *np = dev->of_node;
+	struct device_node *conv;
+	u32 conf;
+	int port;
+
+	memset(dt_val, MIIC_MODCTRL_CONF_NONE, sizeof(dt_val));
+
+	if (of_property_read_u32(np, "renesas,miic-switch-portin", &conf) == 0)
+		dt_val[0] = conf;
+
+	for_each_child_of_node(np, conv) {
+		if (of_property_read_u32(conv, "reg", &port))
+			continue;
+
+		if (!of_device_is_available(conv))
+			continue;
+
+		if (of_property_read_u32(conv, "renesas,miic-input", &conf) == 0)
+			dt_val[port] = conf;
+	}
+
+	return miic_match_dt_conf(dev, dt_val, mode_cfg);
+}
+
+static int miic_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct miic *miic;
+	u32 mode_cfg;
+	int ret;
+
+	ret = miic_parse_dt(dev, &mode_cfg);
+	if (ret < 0)
+		return ret;
+
+	miic = devm_kzalloc(dev, sizeof(*miic), GFP_KERNEL);
+	if (!miic)
+		return -ENOMEM;
+
+	spin_lock_init(&miic->lock);
+	miic->dev = dev;
+	miic->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(miic->base))
+		return PTR_ERR(miic->base);
+
+	ret = devm_pm_runtime_enable(dev);
+	if (ret < 0)
+		return ret;
+
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret < 0)
+		return ret;
+
+	ret = miic_init_hw(miic, mode_cfg);
+	if (ret)
+		goto disable_runtime_pm;
+
+	/* miic_create() relies on that fact that data are attached to the
+	 * platform device to determine if the driver is ready so this needs to
+	 * be the last thing to be done after everything is initialized
+	 * properly.
+	 */
+	platform_set_drvdata(pdev, miic);
+
+	return 0;
+
+disable_runtime_pm:
+	pm_runtime_put(dev);
+
+	return ret;
+}
+
+static int miic_remove(struct platform_device *pdev)
+{
+	pm_runtime_put(&pdev->dev);
+
+	return 0;
+}
+
+static const struct of_device_id miic_of_mtable[] = {
+	{ .compatible = "renesas,rzn1-miic" },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, miic_of_mtable);
+
+static struct platform_driver miic_driver = {
+	.driver = {
+		.name	 = "rzn1_miic",
+		.suppress_bind_attrs = true,
+		.of_match_table = miic_of_mtable,
+	},
+	.probe = miic_probe,
+	.remove = miic_remove,
+};
+module_platform_driver(miic_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Renesas MII converter PCS driver");
+MODULE_AUTHOR("Clément Léger <clement.leger@bootlin.com>");
diff --git a/drivers/net/pcs/pcs-xpcs-nxp.c b/drivers/net/pcs/pcs-xpcs-nxp.c
new file mode 100644
index 000000000..d16fc58cd
--- /dev/null
+++ b/drivers/net/pcs/pcs-xpcs-nxp.c
@@ -0,0 +1,185 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright 2021 NXP
+ */
+#include <linux/pcs/pcs-xpcs.h>
+#include "pcs-xpcs.h"
+
+/* LANE_DRIVER1_0 register */
+#define SJA1110_LANE_DRIVER1_0		0x8038
+#define SJA1110_TXDRV(x)		(((x) << 12) & GENMASK(14, 12))
+
+/* LANE_DRIVER2_0 register */
+#define SJA1110_LANE_DRIVER2_0		0x803a
+#define SJA1110_TXDRVTRIM_LSB(x)	((x) & GENMASK_ULL(15, 0))
+
+/* LANE_DRIVER2_1 register */
+#define SJA1110_LANE_DRIVER2_1		0x803b
+#define SJA1110_LANE_DRIVER2_1_RSV	BIT(9)
+#define SJA1110_TXDRVTRIM_MSB(x)	(((x) & GENMASK_ULL(23, 16)) >> 16)
+
+/* LANE_TRIM register */
+#define SJA1110_LANE_TRIM		0x8040
+#define SJA1110_TXTEN			BIT(11)
+#define SJA1110_TXRTRIM(x)		(((x) << 8) & GENMASK(10, 8))
+#define SJA1110_TXPLL_BWSEL		BIT(7)
+#define SJA1110_RXTEN			BIT(6)
+#define SJA1110_RXRTRIM(x)		(((x) << 3) & GENMASK(5, 3))
+#define SJA1110_CDR_GAIN		BIT(2)
+#define SJA1110_ACCOUPLE_RXVCM_EN	BIT(0)
+
+/* LANE_DATAPATH_1 register */
+#define SJA1110_LANE_DATAPATH_1		0x8037
+
+/* POWERDOWN_ENABLE register */
+#define SJA1110_POWERDOWN_ENABLE	0x8041
+#define SJA1110_TXPLL_PD		BIT(12)
+#define SJA1110_TXPD			BIT(11)
+#define SJA1110_RXPKDETEN		BIT(10)
+#define SJA1110_RXCH_PD			BIT(9)
+#define SJA1110_RXBIAS_PD		BIT(8)
+#define SJA1110_RESET_SER_EN		BIT(7)
+#define SJA1110_RESET_SER		BIT(6)
+#define SJA1110_RESET_DES		BIT(5)
+#define SJA1110_RCVEN			BIT(4)
+
+/* RXPLL_CTRL0 register */
+#define SJA1110_RXPLL_CTRL0		0x8065
+#define SJA1110_RXPLL_FBDIV(x)		(((x) << 2) & GENMASK(9, 2))
+
+/* RXPLL_CTRL1 register */
+#define SJA1110_RXPLL_CTRL1		0x8066
+#define SJA1110_RXPLL_REFDIV(x)		((x) & GENMASK(4, 0))
+
+/* TXPLL_CTRL0 register */
+#define SJA1110_TXPLL_CTRL0		0x806d
+#define SJA1110_TXPLL_FBDIV(x)		((x) & GENMASK(11, 0))
+
+/* TXPLL_CTRL1 register */
+#define SJA1110_TXPLL_CTRL1		0x806e
+#define SJA1110_TXPLL_REFDIV(x)		((x) & GENMASK(5, 0))
+
+/* RX_DATA_DETECT register */
+#define SJA1110_RX_DATA_DETECT		0x8045
+
+/* RX_CDR_CTLE register */
+#define SJA1110_RX_CDR_CTLE		0x8042
+
+/* In NXP SJA1105, the PCS is integrated with a PMA that has the TX lane
+ * polarity inverted by default (PLUS is MINUS, MINUS is PLUS). To obtain
+ * normal non-inverted behavior, the TX lane polarity must be inverted in the
+ * PCS, via the DIGITAL_CONTROL_2 register.
+ */
+int nxp_sja1105_sgmii_pma_config(struct dw_xpcs *xpcs)
+{
+	return xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_DIG_CTRL2,
+			  DW_VR_MII_DIG_CTRL2_TX_POL_INV);
+}
+
+static int nxp_sja1110_pma_config(struct dw_xpcs *xpcs,
+				  u16 txpll_fbdiv, u16 txpll_refdiv,
+				  u16 rxpll_fbdiv, u16 rxpll_refdiv,
+				  u16 rx_cdr_ctle)
+{
+	u16 val;
+	int ret;
+
+	/* Program TX PLL feedback divider and reference divider settings for
+	 * correct oscillation frequency.
+	 */
+	ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_TXPLL_CTRL0,
+			 SJA1110_TXPLL_FBDIV(txpll_fbdiv));
+	if (ret < 0)
+		return ret;
+
+	ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_TXPLL_CTRL1,
+			 SJA1110_TXPLL_REFDIV(txpll_refdiv));
+	if (ret < 0)
+		return ret;
+
+	/* Program transmitter amplitude and disable amplitude trimming */
+	ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_LANE_DRIVER1_0,
+			 SJA1110_TXDRV(0x5));
+	if (ret < 0)
+		return ret;
+
+	val = SJA1110_TXDRVTRIM_LSB(0xffffffull);
+
+	ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_LANE_DRIVER2_0, val);
+	if (ret < 0)
+		return ret;
+
+	val = SJA1110_TXDRVTRIM_MSB(0xffffffull) | SJA1110_LANE_DRIVER2_1_RSV;
+
+	ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_LANE_DRIVER2_1, val);
+	if (ret < 0)
+		return ret;
+
+	/* Enable input and output resistor terminations for low BER. */
+	val = SJA1110_ACCOUPLE_RXVCM_EN | SJA1110_CDR_GAIN |
+	      SJA1110_RXRTRIM(4) | SJA1110_RXTEN | SJA1110_TXPLL_BWSEL |
+	      SJA1110_TXRTRIM(3) | SJA1110_TXTEN;
+
+	ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_LANE_TRIM, val);
+	if (ret < 0)
+		return ret;
+
+	/* Select PCS as transmitter data source. */
+	ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_LANE_DATAPATH_1, 0);
+	if (ret < 0)
+		return ret;
+
+	/* Program RX PLL feedback divider and reference divider for correct
+	 * oscillation frequency.
+	 */
+	ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_RXPLL_CTRL0,
+			 SJA1110_RXPLL_FBDIV(rxpll_fbdiv));
+	if (ret < 0)
+		return ret;
+
+	ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_RXPLL_CTRL1,
+			 SJA1110_RXPLL_REFDIV(rxpll_refdiv));
+	if (ret < 0)
+		return ret;
+
+	/* Program threshold for receiver signal detector.
+	 * Enable control of RXPLL by receiver signal detector to disable RXPLL
+	 * when an input signal is not present.
+	 */
+	ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_RX_DATA_DETECT, 0x0005);
+	if (ret < 0)
+		return ret;
+
+	/* Enable TX and RX PLLs and circuits.
+	 * Release reset of PMA to enable data flow to/from PCS.
+	 */
+	ret = xpcs_read(xpcs, MDIO_MMD_VEND2, SJA1110_POWERDOWN_ENABLE);
+	if (ret < 0)
+		return ret;
+
+	val = ret & ~(SJA1110_TXPLL_PD | SJA1110_TXPD | SJA1110_RXCH_PD |
+		      SJA1110_RXBIAS_PD | SJA1110_RESET_SER_EN |
+		      SJA1110_RESET_SER | SJA1110_RESET_DES);
+	val |= SJA1110_RXPKDETEN | SJA1110_RCVEN;
+
+	ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_POWERDOWN_ENABLE, val);
+	if (ret < 0)
+		return ret;
+
+	/* Program continuous-time linear equalizer (CTLE) settings. */
+	ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_RX_CDR_CTLE,
+			 rx_cdr_ctle);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+int nxp_sja1110_sgmii_pma_config(struct dw_xpcs *xpcs)
+{
+	return nxp_sja1110_pma_config(xpcs, 0x19, 0x1, 0x19, 0x1, 0x212a);
+}
+
+int nxp_sja1110_2500basex_pma_config(struct dw_xpcs *xpcs)
+{
+	return nxp_sja1110_pma_config(xpcs, 0x7d, 0x2, 0x7d, 0x2, 0x732a);
+}
diff --git a/drivers/net/pcs/pcs-xpcs.c b/drivers/net/pcs/pcs-xpcs.c
new file mode 100644
index 000000000..3f882bce3
--- /dev/null
+++ b/drivers/net/pcs/pcs-xpcs.c
@@ -0,0 +1,1321 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020 Synopsys, Inc. and/or its affiliates.
+ * Synopsys DesignWare XPCS helpers
+ *
+ * Author: Jose Abreu <Jose.Abreu@synopsys.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/pcs/pcs-xpcs.h>
+#include <linux/mdio.h>
+#include <linux/phylink.h>
+#include <linux/workqueue.h>
+#include "pcs-xpcs.h"
+
+#define phylink_pcs_to_xpcs(pl_pcs) \
+	container_of((pl_pcs), struct dw_xpcs, pcs)
+
+static const int xpcs_usxgmii_features[] = {
+	ETHTOOL_LINK_MODE_Pause_BIT,
+	ETHTOOL_LINK_MODE_Asym_Pause_BIT,
+	ETHTOOL_LINK_MODE_Autoneg_BIT,
+	ETHTOOL_LINK_MODE_1000baseKX_Full_BIT,
+	ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT,
+	ETHTOOL_LINK_MODE_10000baseKR_Full_BIT,
+	ETHTOOL_LINK_MODE_2500baseX_Full_BIT,
+	__ETHTOOL_LINK_MODE_MASK_NBITS,
+};
+
+static const int xpcs_10gkr_features[] = {
+	ETHTOOL_LINK_MODE_Pause_BIT,
+	ETHTOOL_LINK_MODE_Asym_Pause_BIT,
+	ETHTOOL_LINK_MODE_10000baseKR_Full_BIT,
+	__ETHTOOL_LINK_MODE_MASK_NBITS,
+};
+
+static const int xpcs_xlgmii_features[] = {
+	ETHTOOL_LINK_MODE_Pause_BIT,
+	ETHTOOL_LINK_MODE_Asym_Pause_BIT,
+	ETHTOOL_LINK_MODE_25000baseCR_Full_BIT,
+	ETHTOOL_LINK_MODE_25000baseKR_Full_BIT,
+	ETHTOOL_LINK_MODE_25000baseSR_Full_BIT,
+	ETHTOOL_LINK_MODE_40000baseKR4_Full_BIT,
+	ETHTOOL_LINK_MODE_40000baseCR4_Full_BIT,
+	ETHTOOL_LINK_MODE_40000baseSR4_Full_BIT,
+	ETHTOOL_LINK_MODE_40000baseLR4_Full_BIT,
+	ETHTOOL_LINK_MODE_50000baseCR2_Full_BIT,
+	ETHTOOL_LINK_MODE_50000baseKR2_Full_BIT,
+	ETHTOOL_LINK_MODE_50000baseSR2_Full_BIT,
+	ETHTOOL_LINK_MODE_50000baseKR_Full_BIT,
+	ETHTOOL_LINK_MODE_50000baseSR_Full_BIT,
+	ETHTOOL_LINK_MODE_50000baseCR_Full_BIT,
+	ETHTOOL_LINK_MODE_50000baseLR_ER_FR_Full_BIT,
+	ETHTOOL_LINK_MODE_50000baseDR_Full_BIT,
+	ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT,
+	ETHTOOL_LINK_MODE_100000baseSR4_Full_BIT,
+	ETHTOOL_LINK_MODE_100000baseCR4_Full_BIT,
+	ETHTOOL_LINK_MODE_100000baseLR4_ER4_Full_BIT,
+	ETHTOOL_LINK_MODE_100000baseKR2_Full_BIT,
+	ETHTOOL_LINK_MODE_100000baseSR2_Full_BIT,
+	ETHTOOL_LINK_MODE_100000baseCR2_Full_BIT,
+	ETHTOOL_LINK_MODE_100000baseLR2_ER2_FR2_Full_BIT,
+	ETHTOOL_LINK_MODE_100000baseDR2_Full_BIT,
+	__ETHTOOL_LINK_MODE_MASK_NBITS,
+};
+
+static const int xpcs_sgmii_features[] = {
+	ETHTOOL_LINK_MODE_Pause_BIT,
+	ETHTOOL_LINK_MODE_Asym_Pause_BIT,
+	ETHTOOL_LINK_MODE_Autoneg_BIT,
+	ETHTOOL_LINK_MODE_10baseT_Half_BIT,
+	ETHTOOL_LINK_MODE_10baseT_Full_BIT,
+	ETHTOOL_LINK_MODE_100baseT_Half_BIT,
+	ETHTOOL_LINK_MODE_100baseT_Full_BIT,
+	ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
+	ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+	__ETHTOOL_LINK_MODE_MASK_NBITS,
+};
+
+static const int xpcs_1000basex_features[] = {
+	ETHTOOL_LINK_MODE_Pause_BIT,
+	ETHTOOL_LINK_MODE_Asym_Pause_BIT,
+	ETHTOOL_LINK_MODE_Autoneg_BIT,
+	ETHTOOL_LINK_MODE_1000baseX_Full_BIT,
+	__ETHTOOL_LINK_MODE_MASK_NBITS,
+};
+
+static const int xpcs_2500basex_features[] = {
+	ETHTOOL_LINK_MODE_Pause_BIT,
+	ETHTOOL_LINK_MODE_Asym_Pause_BIT,
+	ETHTOOL_LINK_MODE_Autoneg_BIT,
+	ETHTOOL_LINK_MODE_2500baseX_Full_BIT,
+	ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
+	__ETHTOOL_LINK_MODE_MASK_NBITS,
+};
+
+static const phy_interface_t xpcs_usxgmii_interfaces[] = {
+	PHY_INTERFACE_MODE_USXGMII,
+};
+
+static const phy_interface_t xpcs_10gkr_interfaces[] = {
+	PHY_INTERFACE_MODE_10GKR,
+};
+
+static const phy_interface_t xpcs_xlgmii_interfaces[] = {
+	PHY_INTERFACE_MODE_XLGMII,
+};
+
+static const phy_interface_t xpcs_sgmii_interfaces[] = {
+	PHY_INTERFACE_MODE_SGMII,
+};
+
+static const phy_interface_t xpcs_1000basex_interfaces[] = {
+	PHY_INTERFACE_MODE_1000BASEX,
+};
+
+static const phy_interface_t xpcs_2500basex_interfaces[] = {
+	PHY_INTERFACE_MODE_2500BASEX,
+	PHY_INTERFACE_MODE_MAX,
+};
+
+enum {
+	DW_XPCS_USXGMII,
+	DW_XPCS_10GKR,
+	DW_XPCS_XLGMII,
+	DW_XPCS_SGMII,
+	DW_XPCS_1000BASEX,
+	DW_XPCS_2500BASEX,
+	DW_XPCS_INTERFACE_MAX,
+};
+
+struct xpcs_compat {
+	const int *supported;
+	const phy_interface_t *interface;
+	int num_interfaces;
+	int an_mode;
+	int (*pma_config)(struct dw_xpcs *xpcs);
+};
+
+struct xpcs_id {
+	u32 id;
+	u32 mask;
+	const struct xpcs_compat *compat;
+};
+
+static const struct xpcs_compat *xpcs_find_compat(const struct xpcs_id *id,
+						  phy_interface_t interface)
+{
+	int i, j;
+
+	for (i = 0; i < DW_XPCS_INTERFACE_MAX; i++) {
+		const struct xpcs_compat *compat = &id->compat[i];
+
+		for (j = 0; j < compat->num_interfaces; j++)
+			if (compat->interface[j] == interface)
+				return compat;
+	}
+
+	return NULL;
+}
+
+int xpcs_get_an_mode(struct dw_xpcs *xpcs, phy_interface_t interface)
+{
+	const struct xpcs_compat *compat;
+
+	compat = xpcs_find_compat(xpcs->id, interface);
+	if (!compat)
+		return -ENODEV;
+
+	return compat->an_mode;
+}
+EXPORT_SYMBOL_GPL(xpcs_get_an_mode);
+
+static bool __xpcs_linkmode_supported(const struct xpcs_compat *compat,
+				      enum ethtool_link_mode_bit_indices linkmode)
+{
+	int i;
+
+	for (i = 0; compat->supported[i] != __ETHTOOL_LINK_MODE_MASK_NBITS; i++)
+		if (compat->supported[i] == linkmode)
+			return true;
+
+	return false;
+}
+
+#define xpcs_linkmode_supported(compat, mode) \
+	__xpcs_linkmode_supported(compat, ETHTOOL_LINK_MODE_ ## mode ## _BIT)
+
+int xpcs_read(struct dw_xpcs *xpcs, int dev, u32 reg)
+{
+	struct mii_bus *bus = xpcs->mdiodev->bus;
+	int addr = xpcs->mdiodev->addr;
+
+	return mdiobus_c45_read(bus, addr, dev, reg);
+}
+
+int xpcs_write(struct dw_xpcs *xpcs, int dev, u32 reg, u16 val)
+{
+	struct mii_bus *bus = xpcs->mdiodev->bus;
+	int addr = xpcs->mdiodev->addr;
+
+	return mdiobus_c45_write(bus, addr, dev, reg, val);
+}
+
+static int xpcs_modify_changed(struct dw_xpcs *xpcs, int dev, u32 reg,
+			       u16 mask, u16 set)
+{
+	u32 reg_addr = mdiobus_c45_addr(dev, reg);
+
+	return mdiodev_modify_changed(xpcs->mdiodev, reg_addr, mask, set);
+}
+
+static int xpcs_read_vendor(struct dw_xpcs *xpcs, int dev, u32 reg)
+{
+	return xpcs_read(xpcs, dev, DW_VENDOR | reg);
+}
+
+static int xpcs_write_vendor(struct dw_xpcs *xpcs, int dev, int reg,
+			     u16 val)
+{
+	return xpcs_write(xpcs, dev, DW_VENDOR | reg, val);
+}
+
+static int xpcs_read_vpcs(struct dw_xpcs *xpcs, int reg)
+{
+	return xpcs_read_vendor(xpcs, MDIO_MMD_PCS, reg);
+}
+
+static int xpcs_write_vpcs(struct dw_xpcs *xpcs, int reg, u16 val)
+{
+	return xpcs_write_vendor(xpcs, MDIO_MMD_PCS, reg, val);
+}
+
+static int xpcs_poll_reset(struct dw_xpcs *xpcs, int dev)
+{
+	/* Poll until the reset bit clears (50ms per retry == 0.6 sec) */
+	unsigned int retries = 12;
+	int ret;
+
+	do {
+		msleep(50);
+		ret = xpcs_read(xpcs, dev, MDIO_CTRL1);
+		if (ret < 0)
+			return ret;
+	} while (ret & MDIO_CTRL1_RESET && --retries);
+
+	return (ret & MDIO_CTRL1_RESET) ? -ETIMEDOUT : 0;
+}
+
+static int xpcs_soft_reset(struct dw_xpcs *xpcs,
+			   const struct xpcs_compat *compat)
+{
+	int ret, dev;
+
+	switch (compat->an_mode) {
+	case DW_AN_C73:
+		dev = MDIO_MMD_PCS;
+		break;
+	case DW_AN_C37_SGMII:
+	case DW_2500BASEX:
+	case DW_AN_C37_1000BASEX:
+		dev = MDIO_MMD_VEND2;
+		break;
+	default:
+		return -1;
+	}
+
+	ret = xpcs_write(xpcs, dev, MDIO_CTRL1, MDIO_CTRL1_RESET);
+	if (ret < 0)
+		return ret;
+
+	return xpcs_poll_reset(xpcs, dev);
+}
+
+#define xpcs_warn(__xpcs, __state, __args...) \
+({ \
+	if ((__state)->link) \
+		dev_warn(&(__xpcs)->mdiodev->dev, ##__args); \
+})
+
+static int xpcs_read_fault_c73(struct dw_xpcs *xpcs,
+			       struct phylink_link_state *state)
+{
+	int ret;
+
+	ret = xpcs_read(xpcs, MDIO_MMD_PCS, MDIO_STAT1);
+	if (ret < 0)
+		return ret;
+
+	if (ret & MDIO_STAT1_FAULT) {
+		xpcs_warn(xpcs, state, "Link fault condition detected!\n");
+		return -EFAULT;
+	}
+
+	ret = xpcs_read(xpcs, MDIO_MMD_PCS, MDIO_STAT2);
+	if (ret < 0)
+		return ret;
+
+	if (ret & MDIO_STAT2_RXFAULT)
+		xpcs_warn(xpcs, state, "Receiver fault detected!\n");
+	if (ret & MDIO_STAT2_TXFAULT)
+		xpcs_warn(xpcs, state, "Transmitter fault detected!\n");
+
+	ret = xpcs_read_vendor(xpcs, MDIO_MMD_PCS, DW_VR_XS_PCS_DIG_STS);
+	if (ret < 0)
+		return ret;
+
+	if (ret & DW_RXFIFO_ERR) {
+		xpcs_warn(xpcs, state, "FIFO fault condition detected!\n");
+		return -EFAULT;
+	}
+
+	ret = xpcs_read(xpcs, MDIO_MMD_PCS, MDIO_PCS_10GBRT_STAT1);
+	if (ret < 0)
+		return ret;
+
+	if (!(ret & MDIO_PCS_10GBRT_STAT1_BLKLK))
+		xpcs_warn(xpcs, state, "Link is not locked!\n");
+
+	ret = xpcs_read(xpcs, MDIO_MMD_PCS, MDIO_PCS_10GBRT_STAT2);
+	if (ret < 0)
+		return ret;
+
+	if (ret & MDIO_PCS_10GBRT_STAT2_ERR) {
+		xpcs_warn(xpcs, state, "Link has errors!\n");
+		return -EFAULT;
+	}
+
+	return 0;
+}
+
+static int xpcs_read_link_c73(struct dw_xpcs *xpcs)
+{
+	bool link = true;
+	int ret;
+
+	ret = xpcs_read(xpcs, MDIO_MMD_PCS, MDIO_STAT1);
+	if (ret < 0)
+		return ret;
+
+	if (!(ret & MDIO_STAT1_LSTATUS))
+		link = false;
+
+	return link;
+}
+
+static int xpcs_get_max_usxgmii_speed(const unsigned long *supported)
+{
+	int max = SPEED_UNKNOWN;
+
+	if (phylink_test(supported, 1000baseKX_Full))
+		max = SPEED_1000;
+	if (phylink_test(supported, 2500baseX_Full))
+		max = SPEED_2500;
+	if (phylink_test(supported, 10000baseKX4_Full))
+		max = SPEED_10000;
+	if (phylink_test(supported, 10000baseKR_Full))
+		max = SPEED_10000;
+
+	return max;
+}
+
+static void xpcs_config_usxgmii(struct dw_xpcs *xpcs, int speed)
+{
+	int ret, speed_sel;
+
+	switch (speed) {
+	case SPEED_10:
+		speed_sel = DW_USXGMII_10;
+		break;
+	case SPEED_100:
+		speed_sel = DW_USXGMII_100;
+		break;
+	case SPEED_1000:
+		speed_sel = DW_USXGMII_1000;
+		break;
+	case SPEED_2500:
+		speed_sel = DW_USXGMII_2500;
+		break;
+	case SPEED_5000:
+		speed_sel = DW_USXGMII_5000;
+		break;
+	case SPEED_10000:
+		speed_sel = DW_USXGMII_10000;
+		break;
+	default:
+		/* Nothing to do here */
+		return;
+	}
+
+	ret = xpcs_read_vpcs(xpcs, MDIO_CTRL1);
+	if (ret < 0)
+		goto out;
+
+	ret = xpcs_write_vpcs(xpcs, MDIO_CTRL1, ret | DW_USXGMII_EN);
+	if (ret < 0)
+		goto out;
+
+	ret = xpcs_read(xpcs, MDIO_MMD_VEND2, MDIO_CTRL1);
+	if (ret < 0)
+		goto out;
+
+	ret &= ~DW_USXGMII_SS_MASK;
+	ret |= speed_sel | DW_USXGMII_FULL;
+
+	ret = xpcs_write(xpcs, MDIO_MMD_VEND2, MDIO_CTRL1, ret);
+	if (ret < 0)
+		goto out;
+
+	ret = xpcs_read_vpcs(xpcs, MDIO_CTRL1);
+	if (ret < 0)
+		goto out;
+
+	ret = xpcs_write_vpcs(xpcs, MDIO_CTRL1, ret | DW_USXGMII_RST);
+	if (ret < 0)
+		goto out;
+
+	return;
+
+out:
+	pr_err("%s: XPCS access returned %pe\n", __func__, ERR_PTR(ret));
+}
+
+static int _xpcs_config_aneg_c73(struct dw_xpcs *xpcs,
+				 const struct xpcs_compat *compat)
+{
+	int ret, adv;
+
+	/* By default, in USXGMII mode XPCS operates at 10G baud and
+	 * replicates data to achieve lower speeds. Hereby, in this
+	 * default configuration we need to advertise all supported
+	 * modes and not only the ones we want to use.
+	 */
+
+	/* SR_AN_ADV3 */
+	adv = 0;
+	if (xpcs_linkmode_supported(compat, 2500baseX_Full))
+		adv |= DW_C73_2500KX;
+
+	/* TODO: 5000baseKR */
+
+	ret = xpcs_write(xpcs, MDIO_MMD_AN, DW_SR_AN_ADV3, adv);
+	if (ret < 0)
+		return ret;
+
+	/* SR_AN_ADV2 */
+	adv = 0;
+	if (xpcs_linkmode_supported(compat, 1000baseKX_Full))
+		adv |= DW_C73_1000KX;
+	if (xpcs_linkmode_supported(compat, 10000baseKX4_Full))
+		adv |= DW_C73_10000KX4;
+	if (xpcs_linkmode_supported(compat, 10000baseKR_Full))
+		adv |= DW_C73_10000KR;
+
+	ret = xpcs_write(xpcs, MDIO_MMD_AN, DW_SR_AN_ADV2, adv);
+	if (ret < 0)
+		return ret;
+
+	/* SR_AN_ADV1 */
+	adv = DW_C73_AN_ADV_SF;
+	if (xpcs_linkmode_supported(compat, Pause))
+		adv |= DW_C73_PAUSE;
+	if (xpcs_linkmode_supported(compat, Asym_Pause))
+		adv |= DW_C73_ASYM_PAUSE;
+
+	return xpcs_write(xpcs, MDIO_MMD_AN, DW_SR_AN_ADV1, adv);
+}
+
+static int xpcs_config_aneg_c73(struct dw_xpcs *xpcs,
+				const struct xpcs_compat *compat)
+{
+	int ret;
+
+	ret = _xpcs_config_aneg_c73(xpcs, compat);
+	if (ret < 0)
+		return ret;
+
+	ret = xpcs_read(xpcs, MDIO_MMD_AN, MDIO_CTRL1);
+	if (ret < 0)
+		return ret;
+
+	ret |= MDIO_AN_CTRL1_ENABLE | MDIO_AN_CTRL1_RESTART;
+
+	return xpcs_write(xpcs, MDIO_MMD_AN, MDIO_CTRL1, ret);
+}
+
+static int xpcs_aneg_done_c73(struct dw_xpcs *xpcs,
+			      struct phylink_link_state *state,
+			      const struct xpcs_compat *compat)
+{
+	int ret;
+
+	ret = xpcs_read(xpcs, MDIO_MMD_AN, MDIO_STAT1);
+	if (ret < 0)
+		return ret;
+
+	if (ret & MDIO_AN_STAT1_COMPLETE) {
+		ret = xpcs_read(xpcs, MDIO_MMD_AN, DW_SR_AN_LP_ABL1);
+		if (ret < 0)
+			return ret;
+
+		/* Check if Aneg outcome is valid */
+		if (!(ret & DW_C73_AN_ADV_SF)) {
+			xpcs_config_aneg_c73(xpcs, compat);
+			return 0;
+		}
+
+		return 1;
+	}
+
+	return 0;
+}
+
+static int xpcs_read_lpa_c73(struct dw_xpcs *xpcs,
+			     struct phylink_link_state *state)
+{
+	int ret;
+
+	ret = xpcs_read(xpcs, MDIO_MMD_AN, MDIO_STAT1);
+	if (ret < 0)
+		return ret;
+
+	if (!(ret & MDIO_AN_STAT1_LPABLE)) {
+		phylink_clear(state->lp_advertising, Autoneg);
+		return 0;
+	}
+
+	phylink_set(state->lp_advertising, Autoneg);
+
+	/* Clause 73 outcome */
+	ret = xpcs_read(xpcs, MDIO_MMD_AN, DW_SR_AN_LP_ABL3);
+	if (ret < 0)
+		return ret;
+
+	if (ret & DW_C73_2500KX)
+		phylink_set(state->lp_advertising, 2500baseX_Full);
+
+	ret = xpcs_read(xpcs, MDIO_MMD_AN, DW_SR_AN_LP_ABL2);
+	if (ret < 0)
+		return ret;
+
+	if (ret & DW_C73_1000KX)
+		phylink_set(state->lp_advertising, 1000baseKX_Full);
+	if (ret & DW_C73_10000KX4)
+		phylink_set(state->lp_advertising, 10000baseKX4_Full);
+	if (ret & DW_C73_10000KR)
+		phylink_set(state->lp_advertising, 10000baseKR_Full);
+
+	ret = xpcs_read(xpcs, MDIO_MMD_AN, DW_SR_AN_LP_ABL1);
+	if (ret < 0)
+		return ret;
+
+	if (ret & DW_C73_PAUSE)
+		phylink_set(state->lp_advertising, Pause);
+	if (ret & DW_C73_ASYM_PAUSE)
+		phylink_set(state->lp_advertising, Asym_Pause);
+
+	linkmode_and(state->lp_advertising, state->lp_advertising,
+		     state->advertising);
+	return 0;
+}
+
+static void xpcs_resolve_lpa_c73(struct dw_xpcs *xpcs,
+				 struct phylink_link_state *state)
+{
+	int max_speed = xpcs_get_max_usxgmii_speed(state->lp_advertising);
+
+	state->pause = MLO_PAUSE_TX | MLO_PAUSE_RX;
+	state->speed = max_speed;
+	state->duplex = DUPLEX_FULL;
+}
+
+static int xpcs_get_max_xlgmii_speed(struct dw_xpcs *xpcs,
+				     struct phylink_link_state *state)
+{
+	unsigned long *adv = state->advertising;
+	int speed = SPEED_UNKNOWN;
+	int bit;
+
+	for_each_set_bit(bit, adv, __ETHTOOL_LINK_MODE_MASK_NBITS) {
+		int new_speed = SPEED_UNKNOWN;
+
+		switch (bit) {
+		case ETHTOOL_LINK_MODE_25000baseCR_Full_BIT:
+		case ETHTOOL_LINK_MODE_25000baseKR_Full_BIT:
+		case ETHTOOL_LINK_MODE_25000baseSR_Full_BIT:
+			new_speed = SPEED_25000;
+			break;
+		case ETHTOOL_LINK_MODE_40000baseKR4_Full_BIT:
+		case ETHTOOL_LINK_MODE_40000baseCR4_Full_BIT:
+		case ETHTOOL_LINK_MODE_40000baseSR4_Full_BIT:
+		case ETHTOOL_LINK_MODE_40000baseLR4_Full_BIT:
+			new_speed = SPEED_40000;
+			break;
+		case ETHTOOL_LINK_MODE_50000baseCR2_Full_BIT:
+		case ETHTOOL_LINK_MODE_50000baseKR2_Full_BIT:
+		case ETHTOOL_LINK_MODE_50000baseSR2_Full_BIT:
+		case ETHTOOL_LINK_MODE_50000baseKR_Full_BIT:
+		case ETHTOOL_LINK_MODE_50000baseSR_Full_BIT:
+		case ETHTOOL_LINK_MODE_50000baseCR_Full_BIT:
+		case ETHTOOL_LINK_MODE_50000baseLR_ER_FR_Full_BIT:
+		case ETHTOOL_LINK_MODE_50000baseDR_Full_BIT:
+			new_speed = SPEED_50000;
+			break;
+		case ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT:
+		case ETHTOOL_LINK_MODE_100000baseSR4_Full_BIT:
+		case ETHTOOL_LINK_MODE_100000baseCR4_Full_BIT:
+		case ETHTOOL_LINK_MODE_100000baseLR4_ER4_Full_BIT:
+		case ETHTOOL_LINK_MODE_100000baseKR2_Full_BIT:
+		case ETHTOOL_LINK_MODE_100000baseSR2_Full_BIT:
+		case ETHTOOL_LINK_MODE_100000baseCR2_Full_BIT:
+		case ETHTOOL_LINK_MODE_100000baseLR2_ER2_FR2_Full_BIT:
+		case ETHTOOL_LINK_MODE_100000baseDR2_Full_BIT:
+			new_speed = SPEED_100000;
+			break;
+		default:
+			continue;
+		}
+
+		if (new_speed > speed)
+			speed = new_speed;
+	}
+
+	return speed;
+}
+
+static void xpcs_resolve_pma(struct dw_xpcs *xpcs,
+			     struct phylink_link_state *state)
+{
+	state->pause = MLO_PAUSE_TX | MLO_PAUSE_RX;
+	state->duplex = DUPLEX_FULL;
+
+	switch (state->interface) {
+	case PHY_INTERFACE_MODE_10GKR:
+		state->speed = SPEED_10000;
+		break;
+	case PHY_INTERFACE_MODE_XLGMII:
+		state->speed = xpcs_get_max_xlgmii_speed(xpcs, state);
+		break;
+	default:
+		state->speed = SPEED_UNKNOWN;
+		break;
+	}
+}
+
+static int xpcs_validate(struct phylink_pcs *pcs, unsigned long *supported,
+			 const struct phylink_link_state *state)
+{
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(xpcs_supported) = { 0, };
+	const struct xpcs_compat *compat;
+	struct dw_xpcs *xpcs;
+	int i;
+
+	xpcs = phylink_pcs_to_xpcs(pcs);
+	compat = xpcs_find_compat(xpcs->id, state->interface);
+
+	/* Populate the supported link modes for this PHY interface type.
+	 * FIXME: what about the port modes and autoneg bit? This masks
+	 * all those away.
+	 */
+	if (compat)
+		for (i = 0; compat->supported[i] != __ETHTOOL_LINK_MODE_MASK_NBITS; i++)
+			set_bit(compat->supported[i], xpcs_supported);
+
+	linkmode_and(supported, supported, xpcs_supported);
+
+	return 0;
+}
+
+void xpcs_get_interfaces(struct dw_xpcs *xpcs, unsigned long *interfaces)
+{
+	int i, j;
+
+	for (i = 0; i < DW_XPCS_INTERFACE_MAX; i++) {
+		const struct xpcs_compat *compat = &xpcs->id->compat[i];
+
+		for (j = 0; j < compat->num_interfaces; j++)
+			if (compat->interface[j] < PHY_INTERFACE_MODE_MAX)
+				__set_bit(compat->interface[j], interfaces);
+	}
+}
+EXPORT_SYMBOL_GPL(xpcs_get_interfaces);
+
+int xpcs_config_eee(struct dw_xpcs *xpcs, int mult_fact_100ns, int enable)
+{
+	int ret;
+
+	ret = xpcs_read(xpcs, MDIO_MMD_VEND2, DW_VR_MII_EEE_MCTRL0);
+	if (ret < 0)
+		return ret;
+
+	if (enable) {
+	/* Enable EEE */
+		ret = DW_VR_MII_EEE_LTX_EN | DW_VR_MII_EEE_LRX_EN |
+		      DW_VR_MII_EEE_TX_QUIET_EN | DW_VR_MII_EEE_RX_QUIET_EN |
+		      DW_VR_MII_EEE_TX_EN_CTRL | DW_VR_MII_EEE_RX_EN_CTRL |
+		      mult_fact_100ns << DW_VR_MII_EEE_MULT_FACT_100NS_SHIFT;
+	} else {
+		ret &= ~(DW_VR_MII_EEE_LTX_EN | DW_VR_MII_EEE_LRX_EN |
+		       DW_VR_MII_EEE_TX_QUIET_EN | DW_VR_MII_EEE_RX_QUIET_EN |
+		       DW_VR_MII_EEE_TX_EN_CTRL | DW_VR_MII_EEE_RX_EN_CTRL |
+		       DW_VR_MII_EEE_MULT_FACT_100NS);
+	}
+
+	ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_EEE_MCTRL0, ret);
+	if (ret < 0)
+		return ret;
+
+	ret = xpcs_read(xpcs, MDIO_MMD_VEND2, DW_VR_MII_EEE_MCTRL1);
+	if (ret < 0)
+		return ret;
+
+	if (enable)
+		ret |= DW_VR_MII_EEE_TRN_LPI;
+	else
+		ret &= ~DW_VR_MII_EEE_TRN_LPI;
+
+	return xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_EEE_MCTRL1, ret);
+}
+EXPORT_SYMBOL_GPL(xpcs_config_eee);
+
+static int xpcs_config_aneg_c37_sgmii(struct dw_xpcs *xpcs, unsigned int mode)
+{
+	int ret, mdio_ctrl;
+
+	/* For AN for C37 SGMII mode, the settings are :-
+	 * 1) VR_MII_MMD_CTRL Bit(12) [AN_ENABLE] = 0b (Disable SGMII AN in case
+	      it is already enabled)
+	 * 2) VR_MII_AN_CTRL Bit(2:1)[PCS_MODE] = 10b (SGMII AN)
+	 * 3) VR_MII_AN_CTRL Bit(3) [TX_CONFIG] = 0b (MAC side SGMII)
+	 *    DW xPCS used with DW EQoS MAC is always MAC side SGMII.
+	 * 4) VR_MII_DIG_CTRL1 Bit(9) [MAC_AUTO_SW] = 1b (Automatic
+	 *    speed/duplex mode change by HW after SGMII AN complete)
+	 * 5) VR_MII_MMD_CTRL Bit(12) [AN_ENABLE] = 1b (Enable SGMII AN)
+	 *
+	 * Note: Since it is MAC side SGMII, there is no need to set
+	 *	 SR_MII_AN_ADV. MAC side SGMII receives AN Tx Config from
+	 *	 PHY about the link state change after C28 AN is completed
+	 *	 between PHY and Link Partner. There is also no need to
+	 *	 trigger AN restart for MAC-side SGMII.
+	 */
+	mdio_ctrl = xpcs_read(xpcs, MDIO_MMD_VEND2, DW_VR_MII_MMD_CTRL);
+	if (mdio_ctrl < 0)
+		return mdio_ctrl;
+
+	if (mdio_ctrl & AN_CL37_EN) {
+		ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_MMD_CTRL,
+				 mdio_ctrl & ~AN_CL37_EN);
+		if (ret < 0)
+			return ret;
+	}
+
+	ret = xpcs_read(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_CTRL);
+	if (ret < 0)
+		return ret;
+
+	ret &= ~(DW_VR_MII_PCS_MODE_MASK | DW_VR_MII_TX_CONFIG_MASK);
+	ret |= (DW_VR_MII_PCS_MODE_C37_SGMII <<
+		DW_VR_MII_AN_CTRL_PCS_MODE_SHIFT &
+		DW_VR_MII_PCS_MODE_MASK);
+	ret |= (DW_VR_MII_TX_CONFIG_MAC_SIDE_SGMII <<
+		DW_VR_MII_AN_CTRL_TX_CONFIG_SHIFT &
+		DW_VR_MII_TX_CONFIG_MASK);
+	ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_CTRL, ret);
+	if (ret < 0)
+		return ret;
+
+	ret = xpcs_read(xpcs, MDIO_MMD_VEND2, DW_VR_MII_DIG_CTRL1);
+	if (ret < 0)
+		return ret;
+
+	if (phylink_autoneg_inband(mode))
+		ret |= DW_VR_MII_DIG_CTRL1_MAC_AUTO_SW;
+	else
+		ret &= ~DW_VR_MII_DIG_CTRL1_MAC_AUTO_SW;
+
+	ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_DIG_CTRL1, ret);
+	if (ret < 0)
+		return ret;
+
+	if (phylink_autoneg_inband(mode))
+		ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_MMD_CTRL,
+				 mdio_ctrl | AN_CL37_EN);
+
+	return ret;
+}
+
+static int xpcs_config_aneg_c37_1000basex(struct dw_xpcs *xpcs, unsigned int mode,
+					  const unsigned long *advertising)
+{
+	phy_interface_t interface = PHY_INTERFACE_MODE_1000BASEX;
+	int ret, mdio_ctrl, adv;
+	bool changed = 0;
+
+	/* According to Chap 7.12, to set 1000BASE-X C37 AN, AN must
+	 * be disabled first:-
+	 * 1) VR_MII_MMD_CTRL Bit(12)[AN_ENABLE] = 0b
+	 * 2) VR_MII_AN_CTRL Bit(2:1)[PCS_MODE] = 00b (1000BASE-X C37)
+	 */
+	mdio_ctrl = xpcs_read(xpcs, MDIO_MMD_VEND2, DW_VR_MII_MMD_CTRL);
+	if (mdio_ctrl < 0)
+		return mdio_ctrl;
+
+	if (mdio_ctrl & AN_CL37_EN) {
+		ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_MMD_CTRL,
+				 mdio_ctrl & ~AN_CL37_EN);
+		if (ret < 0)
+			return ret;
+	}
+
+	ret = xpcs_read(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_CTRL);
+	if (ret < 0)
+		return ret;
+
+	ret &= ~DW_VR_MII_PCS_MODE_MASK;
+	ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_CTRL, ret);
+	if (ret < 0)
+		return ret;
+
+	/* Check for advertising changes and update the C45 MII ADV
+	 * register accordingly.
+	 */
+	adv = phylink_mii_c22_pcs_encode_advertisement(interface,
+						       advertising);
+	if (adv >= 0) {
+		ret = xpcs_modify_changed(xpcs, MDIO_MMD_VEND2,
+					  MII_ADVERTISE, 0xffff, adv);
+		if (ret < 0)
+			return ret;
+
+		changed = ret;
+	}
+
+	/* Clear CL37 AN complete status */
+	ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_INTR_STS, 0);
+	if (ret < 0)
+		return ret;
+
+	if (phylink_autoneg_inband(mode) &&
+	    linkmode_test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, advertising)) {
+		ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_MMD_CTRL,
+				 mdio_ctrl | AN_CL37_EN);
+		if (ret < 0)
+			return ret;
+	}
+
+	return changed;
+}
+
+static int xpcs_config_2500basex(struct dw_xpcs *xpcs)
+{
+	int ret;
+
+	ret = xpcs_read(xpcs, MDIO_MMD_VEND2, DW_VR_MII_DIG_CTRL1);
+	if (ret < 0)
+		return ret;
+	ret |= DW_VR_MII_DIG_CTRL1_2G5_EN;
+	ret &= ~DW_VR_MII_DIG_CTRL1_MAC_AUTO_SW;
+	ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_DIG_CTRL1, ret);
+	if (ret < 0)
+		return ret;
+
+	ret = xpcs_read(xpcs, MDIO_MMD_VEND2, DW_VR_MII_MMD_CTRL);
+	if (ret < 0)
+		return ret;
+	ret &= ~AN_CL37_EN;
+	ret |= SGMII_SPEED_SS6;
+	ret &= ~SGMII_SPEED_SS13;
+	return xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_MMD_CTRL, ret);
+}
+
+int xpcs_do_config(struct dw_xpcs *xpcs, phy_interface_t interface,
+		   unsigned int mode, const unsigned long *advertising)
+{
+	const struct xpcs_compat *compat;
+	int ret;
+
+	compat = xpcs_find_compat(xpcs->id, interface);
+	if (!compat)
+		return -ENODEV;
+
+	switch (compat->an_mode) {
+	case DW_AN_C73:
+		if (test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, advertising)) {
+			ret = xpcs_config_aneg_c73(xpcs, compat);
+			if (ret)
+				return ret;
+		}
+		break;
+	case DW_AN_C37_SGMII:
+		ret = xpcs_config_aneg_c37_sgmii(xpcs, mode);
+		if (ret)
+			return ret;
+		break;
+	case DW_AN_C37_1000BASEX:
+		ret = xpcs_config_aneg_c37_1000basex(xpcs, mode,
+						     advertising);
+		if (ret)
+			return ret;
+		break;
+	case DW_2500BASEX:
+		ret = xpcs_config_2500basex(xpcs);
+		if (ret)
+			return ret;
+		break;
+	default:
+		return -1;
+	}
+
+	if (compat->pma_config) {
+		ret = compat->pma_config(xpcs);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(xpcs_do_config);
+
+static int xpcs_config(struct phylink_pcs *pcs, unsigned int mode,
+		       phy_interface_t interface,
+		       const unsigned long *advertising,
+		       bool permit_pause_to_mac)
+{
+	struct dw_xpcs *xpcs = phylink_pcs_to_xpcs(pcs);
+
+	return xpcs_do_config(xpcs, interface, mode, advertising);
+}
+
+static int xpcs_get_state_c73(struct dw_xpcs *xpcs,
+			      struct phylink_link_state *state,
+			      const struct xpcs_compat *compat)
+{
+	int ret;
+
+	/* Link needs to be read first ... */
+	state->link = xpcs_read_link_c73(xpcs) > 0 ? 1 : 0;
+
+	/* ... and then we check the faults. */
+	ret = xpcs_read_fault_c73(xpcs, state);
+	if (ret) {
+		ret = xpcs_soft_reset(xpcs, compat);
+		if (ret)
+			return ret;
+
+		state->link = 0;
+
+		return xpcs_do_config(xpcs, state->interface, MLO_AN_INBAND, NULL);
+	}
+
+	if (state->an_enabled && xpcs_aneg_done_c73(xpcs, state, compat)) {
+		state->an_complete = true;
+		xpcs_read_lpa_c73(xpcs, state);
+		xpcs_resolve_lpa_c73(xpcs, state);
+	} else if (state->an_enabled) {
+		state->link = 0;
+	} else if (state->link) {
+		xpcs_resolve_pma(xpcs, state);
+	}
+
+	return 0;
+}
+
+static int xpcs_get_state_c37_sgmii(struct dw_xpcs *xpcs,
+				    struct phylink_link_state *state)
+{
+	int ret;
+
+	/* Reset link_state */
+	state->link = false;
+	state->speed = SPEED_UNKNOWN;
+	state->duplex = DUPLEX_UNKNOWN;
+	state->pause = 0;
+
+	/* For C37 SGMII mode, we check DW_VR_MII_AN_INTR_STS for link
+	 * status, speed and duplex.
+	 */
+	ret = xpcs_read(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_INTR_STS);
+	if (ret < 0)
+		return ret;
+
+	if (ret & DW_VR_MII_C37_ANSGM_SP_LNKSTS) {
+		int speed_value;
+
+		state->link = true;
+
+		speed_value = (ret & DW_VR_MII_AN_STS_C37_ANSGM_SP) >>
+			      DW_VR_MII_AN_STS_C37_ANSGM_SP_SHIFT;
+		if (speed_value == DW_VR_MII_C37_ANSGM_SP_1000)
+			state->speed = SPEED_1000;
+		else if (speed_value == DW_VR_MII_C37_ANSGM_SP_100)
+			state->speed = SPEED_100;
+		else
+			state->speed = SPEED_10;
+
+		if (ret & DW_VR_MII_AN_STS_C37_ANSGM_FD)
+			state->duplex = DUPLEX_FULL;
+		else
+			state->duplex = DUPLEX_HALF;
+	}
+
+	return 0;
+}
+
+static int xpcs_get_state_c37_1000basex(struct dw_xpcs *xpcs,
+					struct phylink_link_state *state)
+{
+	int lpa, bmsr;
+
+	if (state->an_enabled) {
+		/* Reset link state */
+		state->link = false;
+
+		lpa = xpcs_read(xpcs, MDIO_MMD_VEND2, MII_LPA);
+		if (lpa < 0 || lpa & LPA_RFAULT)
+			return lpa;
+
+		bmsr = xpcs_read(xpcs, MDIO_MMD_VEND2, MII_BMSR);
+		if (bmsr < 0)
+			return bmsr;
+
+		phylink_mii_c22_pcs_decode_state(state, bmsr, lpa);
+	}
+
+	return 0;
+}
+
+static void xpcs_get_state(struct phylink_pcs *pcs,
+			   struct phylink_link_state *state)
+{
+	struct dw_xpcs *xpcs = phylink_pcs_to_xpcs(pcs);
+	const struct xpcs_compat *compat;
+	int ret;
+
+	compat = xpcs_find_compat(xpcs->id, state->interface);
+	if (!compat)
+		return;
+
+	switch (compat->an_mode) {
+	case DW_AN_C73:
+		ret = xpcs_get_state_c73(xpcs, state, compat);
+		if (ret) {
+			pr_err("xpcs_get_state_c73 returned %pe\n",
+			       ERR_PTR(ret));
+			return;
+		}
+		break;
+	case DW_AN_C37_SGMII:
+		ret = xpcs_get_state_c37_sgmii(xpcs, state);
+		if (ret) {
+			pr_err("xpcs_get_state_c37_sgmii returned %pe\n",
+			       ERR_PTR(ret));
+		}
+		break;
+	case DW_AN_C37_1000BASEX:
+		ret = xpcs_get_state_c37_1000basex(xpcs, state);
+		if (ret) {
+			pr_err("xpcs_get_state_c37_1000basex returned %pe\n",
+			       ERR_PTR(ret));
+		}
+		break;
+	default:
+		return;
+	}
+}
+
+static void xpcs_link_up_sgmii(struct dw_xpcs *xpcs, unsigned int mode,
+			       int speed, int duplex)
+{
+	int val, ret;
+
+	if (phylink_autoneg_inband(mode))
+		return;
+
+	val = mii_bmcr_encode_fixed(speed, duplex);
+	ret = xpcs_write(xpcs, MDIO_MMD_VEND2, MDIO_CTRL1, val);
+	if (ret)
+		pr_err("%s: xpcs_write returned %pe\n", __func__, ERR_PTR(ret));
+}
+
+static void xpcs_link_up_1000basex(struct dw_xpcs *xpcs, unsigned int mode,
+				   int speed, int duplex)
+{
+	int val, ret;
+
+	if (phylink_autoneg_inband(mode))
+		return;
+
+	switch (speed) {
+	case SPEED_1000:
+		val = BMCR_SPEED1000;
+		break;
+	case SPEED_100:
+	case SPEED_10:
+	default:
+		pr_err("%s: speed = %d\n", __func__, speed);
+		return;
+	}
+
+	if (duplex == DUPLEX_FULL)
+		val |= BMCR_FULLDPLX;
+	else
+		pr_err("%s: half duplex not supported\n", __func__);
+
+	ret = xpcs_write(xpcs, MDIO_MMD_VEND2, MDIO_CTRL1, val);
+	if (ret)
+		pr_err("%s: xpcs_write returned %pe\n", __func__, ERR_PTR(ret));
+}
+
+void xpcs_link_up(struct phylink_pcs *pcs, unsigned int mode,
+		  phy_interface_t interface, int speed, int duplex)
+{
+	struct dw_xpcs *xpcs = phylink_pcs_to_xpcs(pcs);
+
+	if (interface == PHY_INTERFACE_MODE_USXGMII)
+		return xpcs_config_usxgmii(xpcs, speed);
+	if (interface == PHY_INTERFACE_MODE_SGMII)
+		return xpcs_link_up_sgmii(xpcs, mode, speed, duplex);
+	if (interface == PHY_INTERFACE_MODE_1000BASEX)
+		return xpcs_link_up_1000basex(xpcs, mode, speed, duplex);
+}
+EXPORT_SYMBOL_GPL(xpcs_link_up);
+
+static void xpcs_an_restart(struct phylink_pcs *pcs)
+{
+	struct dw_xpcs *xpcs = phylink_pcs_to_xpcs(pcs);
+	int ret;
+
+	ret = xpcs_read(xpcs, MDIO_MMD_VEND2, MDIO_CTRL1);
+	if (ret >= 0) {
+		ret |= BMCR_ANRESTART;
+		xpcs_write(xpcs, MDIO_MMD_VEND2, MDIO_CTRL1, ret);
+	}
+}
+
+static u32 xpcs_get_id(struct dw_xpcs *xpcs)
+{
+	int ret;
+	u32 id;
+
+	/* First, search C73 PCS using PCS MMD */
+	ret = xpcs_read(xpcs, MDIO_MMD_PCS, MII_PHYSID1);
+	if (ret < 0)
+		return 0xffffffff;
+
+	id = ret << 16;
+
+	ret = xpcs_read(xpcs, MDIO_MMD_PCS, MII_PHYSID2);
+	if (ret < 0)
+		return 0xffffffff;
+
+	/* If Device IDs are not all zeros or all ones,
+	 * we found C73 AN-type device
+	 */
+	if ((id | ret) && (id | ret) != 0xffffffff)
+		return id | ret;
+
+	/* Next, search C37 PCS using Vendor-Specific MII MMD */
+	ret = xpcs_read(xpcs, MDIO_MMD_VEND2, MII_PHYSID1);
+	if (ret < 0)
+		return 0xffffffff;
+
+	id = ret << 16;
+
+	ret = xpcs_read(xpcs, MDIO_MMD_VEND2, MII_PHYSID2);
+	if (ret < 0)
+		return 0xffffffff;
+
+	/* If Device IDs are not all zeros, we found C37 AN-type device */
+	if (id | ret)
+		return id | ret;
+
+	return 0xffffffff;
+}
+
+static const struct xpcs_compat synopsys_xpcs_compat[DW_XPCS_INTERFACE_MAX] = {
+	[DW_XPCS_USXGMII] = {
+		.supported = xpcs_usxgmii_features,
+		.interface = xpcs_usxgmii_interfaces,
+		.num_interfaces = ARRAY_SIZE(xpcs_usxgmii_interfaces),
+		.an_mode = DW_AN_C73,
+	},
+	[DW_XPCS_10GKR] = {
+		.supported = xpcs_10gkr_features,
+		.interface = xpcs_10gkr_interfaces,
+		.num_interfaces = ARRAY_SIZE(xpcs_10gkr_interfaces),
+		.an_mode = DW_AN_C73,
+	},
+	[DW_XPCS_XLGMII] = {
+		.supported = xpcs_xlgmii_features,
+		.interface = xpcs_xlgmii_interfaces,
+		.num_interfaces = ARRAY_SIZE(xpcs_xlgmii_interfaces),
+		.an_mode = DW_AN_C73,
+	},
+	[DW_XPCS_SGMII] = {
+		.supported = xpcs_sgmii_features,
+		.interface = xpcs_sgmii_interfaces,
+		.num_interfaces = ARRAY_SIZE(xpcs_sgmii_interfaces),
+		.an_mode = DW_AN_C37_SGMII,
+	},
+	[DW_XPCS_1000BASEX] = {
+		.supported = xpcs_1000basex_features,
+		.interface = xpcs_1000basex_interfaces,
+		.num_interfaces = ARRAY_SIZE(xpcs_1000basex_interfaces),
+		.an_mode = DW_AN_C37_1000BASEX,
+	},
+	[DW_XPCS_2500BASEX] = {
+		.supported = xpcs_2500basex_features,
+		.interface = xpcs_2500basex_interfaces,
+		.num_interfaces = ARRAY_SIZE(xpcs_2500basex_features),
+		.an_mode = DW_2500BASEX,
+	},
+};
+
+static const struct xpcs_compat nxp_sja1105_xpcs_compat[DW_XPCS_INTERFACE_MAX] = {
+	[DW_XPCS_SGMII] = {
+		.supported = xpcs_sgmii_features,
+		.interface = xpcs_sgmii_interfaces,
+		.num_interfaces = ARRAY_SIZE(xpcs_sgmii_interfaces),
+		.an_mode = DW_AN_C37_SGMII,
+		.pma_config = nxp_sja1105_sgmii_pma_config,
+	},
+};
+
+static const struct xpcs_compat nxp_sja1110_xpcs_compat[DW_XPCS_INTERFACE_MAX] = {
+	[DW_XPCS_SGMII] = {
+		.supported = xpcs_sgmii_features,
+		.interface = xpcs_sgmii_interfaces,
+		.num_interfaces = ARRAY_SIZE(xpcs_sgmii_interfaces),
+		.an_mode = DW_AN_C37_SGMII,
+		.pma_config = nxp_sja1110_sgmii_pma_config,
+	},
+	[DW_XPCS_2500BASEX] = {
+		.supported = xpcs_2500basex_features,
+		.interface = xpcs_2500basex_interfaces,
+		.num_interfaces = ARRAY_SIZE(xpcs_2500basex_interfaces),
+		.an_mode = DW_2500BASEX,
+		.pma_config = nxp_sja1110_2500basex_pma_config,
+	},
+};
+
+static const struct xpcs_id xpcs_id_list[] = {
+	{
+		.id = SYNOPSYS_XPCS_ID,
+		.mask = SYNOPSYS_XPCS_MASK,
+		.compat = synopsys_xpcs_compat,
+	}, {
+		.id = NXP_SJA1105_XPCS_ID,
+		.mask = SYNOPSYS_XPCS_MASK,
+		.compat = nxp_sja1105_xpcs_compat,
+	}, {
+		.id = NXP_SJA1110_XPCS_ID,
+		.mask = SYNOPSYS_XPCS_MASK,
+		.compat = nxp_sja1110_xpcs_compat,
+	},
+};
+
+static const struct phylink_pcs_ops xpcs_phylink_ops = {
+	.pcs_validate = xpcs_validate,
+	.pcs_config = xpcs_config,
+	.pcs_get_state = xpcs_get_state,
+	.pcs_an_restart = xpcs_an_restart,
+	.pcs_link_up = xpcs_link_up,
+};
+
+struct dw_xpcs *xpcs_create(struct mdio_device *mdiodev,
+			    phy_interface_t interface)
+{
+	struct dw_xpcs *xpcs;
+	u32 xpcs_id;
+	int i, ret;
+
+	xpcs = kzalloc(sizeof(*xpcs), GFP_KERNEL);
+	if (!xpcs)
+		return ERR_PTR(-ENOMEM);
+
+	xpcs->mdiodev = mdiodev;
+
+	xpcs_id = xpcs_get_id(xpcs);
+
+	for (i = 0; i < ARRAY_SIZE(xpcs_id_list); i++) {
+		const struct xpcs_id *entry = &xpcs_id_list[i];
+		const struct xpcs_compat *compat;
+
+		if ((xpcs_id & entry->mask) != entry->id)
+			continue;
+
+		xpcs->id = entry;
+
+		compat = xpcs_find_compat(entry, interface);
+		if (!compat) {
+			ret = -ENODEV;
+			goto out;
+		}
+
+		xpcs->pcs.ops = &xpcs_phylink_ops;
+		xpcs->pcs.poll = true;
+
+		ret = xpcs_soft_reset(xpcs, compat);
+		if (ret)
+			goto out;
+
+		return xpcs;
+	}
+
+	ret = -ENODEV;
+
+out:
+	kfree(xpcs);
+
+	return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(xpcs_create);
+
+void xpcs_destroy(struct dw_xpcs *xpcs)
+{
+	kfree(xpcs);
+}
+EXPORT_SYMBOL_GPL(xpcs_destroy);
+
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/pcs/pcs-xpcs.h b/drivers/net/pcs/pcs-xpcs.h
new file mode 100644
index 000000000..770df5032
--- /dev/null
+++ b/drivers/net/pcs/pcs-xpcs.h
@@ -0,0 +1,114 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2020 Synopsys, Inc. and/or its affiliates.
+ * Synopsys DesignWare XPCS helpers
+ *
+ * Author: Jose Abreu <Jose.Abreu@synopsys.com>
+ */
+
+#define SYNOPSYS_XPCS_ID		0x7996ced0
+#define SYNOPSYS_XPCS_MASK		0xffffffff
+
+/* Vendor regs access */
+#define DW_VENDOR			BIT(15)
+
+/* VR_XS_PCS */
+#define DW_USXGMII_RST			BIT(10)
+#define DW_USXGMII_EN			BIT(9)
+#define DW_VR_XS_PCS_DIG_STS		0x0010
+#define DW_RXFIFO_ERR			GENMASK(6, 5)
+
+/* SR_MII */
+#define DW_USXGMII_FULL			BIT(8)
+#define DW_USXGMII_SS_MASK		(BIT(13) | BIT(6) | BIT(5))
+#define DW_USXGMII_10000		(BIT(13) | BIT(6))
+#define DW_USXGMII_5000			(BIT(13) | BIT(5))
+#define DW_USXGMII_2500			(BIT(5))
+#define DW_USXGMII_1000			(BIT(6))
+#define DW_USXGMII_100			(BIT(13))
+#define DW_USXGMII_10			(0)
+
+/* SR_AN */
+#define DW_SR_AN_ADV1			0x10
+#define DW_SR_AN_ADV2			0x11
+#define DW_SR_AN_ADV3			0x12
+#define DW_SR_AN_LP_ABL1		0x13
+#define DW_SR_AN_LP_ABL2		0x14
+#define DW_SR_AN_LP_ABL3		0x15
+
+/* Clause 73 Defines */
+/* AN_LP_ABL1 */
+#define DW_C73_PAUSE			BIT(10)
+#define DW_C73_ASYM_PAUSE		BIT(11)
+#define DW_C73_AN_ADV_SF		0x1
+/* AN_LP_ABL2 */
+#define DW_C73_1000KX			BIT(5)
+#define DW_C73_10000KX4			BIT(6)
+#define DW_C73_10000KR			BIT(7)
+/* AN_LP_ABL3 */
+#define DW_C73_2500KX			BIT(0)
+#define DW_C73_5000KR			BIT(1)
+
+/* Clause 37 Defines */
+/* VR MII MMD registers offsets */
+#define DW_VR_MII_MMD_CTRL		0x0000
+#define DW_VR_MII_DIG_CTRL1		0x8000
+#define DW_VR_MII_AN_CTRL		0x8001
+#define DW_VR_MII_AN_INTR_STS		0x8002
+/* Enable 2.5G Mode */
+#define DW_VR_MII_DIG_CTRL1_2G5_EN	BIT(2)
+/* EEE Mode Control Register */
+#define DW_VR_MII_EEE_MCTRL0		0x8006
+#define DW_VR_MII_EEE_MCTRL1		0x800b
+#define DW_VR_MII_DIG_CTRL2		0x80e1
+
+/* VR_MII_DIG_CTRL1 */
+#define DW_VR_MII_DIG_CTRL1_MAC_AUTO_SW		BIT(9)
+
+/* VR_MII_DIG_CTRL2 */
+#define DW_VR_MII_DIG_CTRL2_TX_POL_INV		BIT(4)
+#define DW_VR_MII_DIG_CTRL2_RX_POL_INV		BIT(0)
+
+/* VR_MII_AN_CTRL */
+#define DW_VR_MII_AN_CTRL_TX_CONFIG_SHIFT	3
+#define DW_VR_MII_TX_CONFIG_MASK		BIT(3)
+#define DW_VR_MII_TX_CONFIG_PHY_SIDE_SGMII	0x1
+#define DW_VR_MII_TX_CONFIG_MAC_SIDE_SGMII	0x0
+#define DW_VR_MII_AN_CTRL_PCS_MODE_SHIFT	1
+#define DW_VR_MII_PCS_MODE_MASK			GENMASK(2, 1)
+#define DW_VR_MII_PCS_MODE_C37_1000BASEX	0x0
+#define DW_VR_MII_PCS_MODE_C37_SGMII		0x2
+
+/* VR_MII_AN_INTR_STS */
+#define DW_VR_MII_AN_STS_C37_ANSGM_FD		BIT(1)
+#define DW_VR_MII_AN_STS_C37_ANSGM_SP_SHIFT	2
+#define DW_VR_MII_AN_STS_C37_ANSGM_SP		GENMASK(3, 2)
+#define DW_VR_MII_C37_ANSGM_SP_10		0x0
+#define DW_VR_MII_C37_ANSGM_SP_100		0x1
+#define DW_VR_MII_C37_ANSGM_SP_1000		0x2
+#define DW_VR_MII_C37_ANSGM_SP_LNKSTS		BIT(4)
+
+/* SR MII MMD Control defines */
+#define AN_CL37_EN			BIT(12)	/* Enable Clause 37 auto-nego */
+#define SGMII_SPEED_SS13		BIT(13)	/* SGMII speed along with SS6 */
+#define SGMII_SPEED_SS6			BIT(6)	/* SGMII speed along with SS13 */
+
+/* VR MII EEE Control 0 defines */
+#define DW_VR_MII_EEE_LTX_EN			BIT(0)  /* LPI Tx Enable */
+#define DW_VR_MII_EEE_LRX_EN			BIT(1)  /* LPI Rx Enable */
+#define DW_VR_MII_EEE_TX_QUIET_EN		BIT(2)  /* Tx Quiet Enable */
+#define DW_VR_MII_EEE_RX_QUIET_EN		BIT(3)  /* Rx Quiet Enable */
+#define DW_VR_MII_EEE_TX_EN_CTRL		BIT(4)  /* Tx Control Enable */
+#define DW_VR_MII_EEE_RX_EN_CTRL		BIT(7)  /* Rx Control Enable */
+
+#define DW_VR_MII_EEE_MULT_FACT_100NS_SHIFT	8
+#define DW_VR_MII_EEE_MULT_FACT_100NS		GENMASK(11, 8)
+
+/* VR MII EEE Control 1 defines */
+#define DW_VR_MII_EEE_TRN_LPI		BIT(0)	/* Transparent Mode Enable */
+
+int xpcs_read(struct dw_xpcs *xpcs, int dev, u32 reg);
+int xpcs_write(struct dw_xpcs *xpcs, int dev, u32 reg, u16 val);
+int nxp_sja1105_sgmii_pma_config(struct dw_xpcs *xpcs);
+int nxp_sja1110_sgmii_pma_config(struct dw_xpcs *xpcs);
+int nxp_sja1110_2500basex_pma_config(struct dw_xpcs *xpcs);