Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 781 insertions, 0 deletions

diff --git a/drivers/net/usb/asix_common.c b/drivers/net/usb/asix_common.c
new file mode 100644
index 000000000..72ffc89b4
--- /dev/null
+++ b/drivers/net/usb/asix_common.c
@@ -0,0 +1,781 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ASIX AX8817X based USB 2.0 Ethernet Devices
+ * Copyright (C) 2003-2006 David Hollis <dhollis@davehollis.com>
+ * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
+ * Copyright (C) 2006 James Painter <jamie.painter@iname.com>
+ * Copyright (c) 2002-2003 TiVo Inc.
+ */
+
+#include "asix.h"
+
+#define AX_HOST_EN_RETRIES	30
+
+int __must_check asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+			       u16 size, void *data, int in_pm)
+{
+	int ret;
+	int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16);
+
+	BUG_ON(!dev);
+
+	if (!in_pm)
+		fn = usbnet_read_cmd;
+	else
+		fn = usbnet_read_cmd_nopm;
+
+	ret = fn(dev, cmd, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		 value, index, data, size);
+
+	if (unlikely(ret < size)) {
+		ret = ret < 0 ? ret : -ENODATA;
+
+		netdev_warn(dev->net, "Failed to read reg index 0x%04x: %d\n",
+			    index, ret);
+	}
+
+	return ret;
+}
+
+int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+		   u16 size, void *data, int in_pm)
+{
+	int ret;
+	int (*fn)(struct usbnet *, u8, u8, u16, u16, const void *, u16);
+
+	BUG_ON(!dev);
+
+	if (!in_pm)
+		fn = usbnet_write_cmd;
+	else
+		fn = usbnet_write_cmd_nopm;
+
+	ret = fn(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+		 value, index, data, size);
+
+	if (unlikely(ret < 0))
+		netdev_warn(dev->net, "Failed to write reg index 0x%04x: %d\n",
+			    index, ret);
+
+	return ret;
+}
+
+void asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+			  u16 size, void *data)
+{
+	usbnet_write_cmd_async(dev, cmd,
+			       USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			       value, index, data, size);
+}
+
+static int asix_set_sw_mii(struct usbnet *dev, int in_pm)
+{
+	int ret;
+
+	ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL, in_pm);
+
+	if (ret < 0)
+		netdev_err(dev->net, "Failed to enable software MII access\n");
+	return ret;
+}
+
+static int asix_set_hw_mii(struct usbnet *dev, int in_pm)
+{
+	int ret;
+
+	ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL, in_pm);
+	if (ret < 0)
+		netdev_err(dev->net, "Failed to enable hardware MII access\n");
+	return ret;
+}
+
+static int asix_check_host_enable(struct usbnet *dev, int in_pm)
+{
+	int i, ret;
+	u8 smsr;
+
+	for (i = 0; i < AX_HOST_EN_RETRIES; ++i) {
+		ret = asix_set_sw_mii(dev, in_pm);
+		if (ret == -ENODEV || ret == -ETIMEDOUT)
+			break;
+		usleep_range(1000, 1100);
+		ret = asix_read_cmd(dev, AX_CMD_STATMNGSTS_REG,
+				    0, 0, 1, &smsr, in_pm);
+		if (ret == -ENODEV)
+			break;
+		else if (ret < 0)
+			continue;
+		else if (smsr & AX_HOST_EN)
+			break;
+	}
+
+	return i >= AX_HOST_EN_RETRIES ? -ETIMEDOUT : ret;
+}
+
+static void reset_asix_rx_fixup_info(struct asix_rx_fixup_info *rx)
+{
+	/* Reset the variables that have a lifetime outside of
+	 * asix_rx_fixup_internal() so that future processing starts from a
+	 * known set of initial conditions.
+	 */
+
+	if (rx->ax_skb) {
+		/* Discard any incomplete Ethernet frame in the netdev buffer */
+		kfree_skb(rx->ax_skb);
+		rx->ax_skb = NULL;
+	}
+
+	/* Assume the Data header 32-bit word is at the start of the current
+	 * or next URB socket buffer so reset all the state variables.
+	 */
+	rx->remaining = 0;
+	rx->split_head = false;
+	rx->header = 0;
+}
+
+int asix_rx_fixup_internal(struct usbnet *dev, struct sk_buff *skb,
+			   struct asix_rx_fixup_info *rx)
+{
+	int offset = 0;
+	u16 size;
+
+	/* When an Ethernet frame spans multiple URB socket buffers,
+	 * do a sanity test for the Data header synchronisation.
+	 * Attempt to detect the situation of the previous socket buffer having
+	 * been truncated or a socket buffer was missing. These situations
+	 * cause a discontinuity in the data stream and therefore need to avoid
+	 * appending bad data to the end of the current netdev socket buffer.
+	 * Also avoid unnecessarily discarding a good current netdev socket
+	 * buffer.
+	 */
+	if (rx->remaining && (rx->remaining + sizeof(u32) <= skb->len)) {
+		offset = ((rx->remaining + 1) & 0xfffe);
+		rx->header = get_unaligned_le32(skb->data + offset);
+		offset = 0;
+
+		size = (u16)(rx->header & 0x7ff);
+		if (size != ((~rx->header >> 16) & 0x7ff)) {
+			netdev_err(dev->net, "asix_rx_fixup() Data Header synchronisation was lost, remaining %d\n",
+				   rx->remaining);
+			reset_asix_rx_fixup_info(rx);
+		}
+	}
+
+	while (offset + sizeof(u16) <= skb->len) {
+		u16 copy_length;
+
+		if (!rx->remaining) {
+			if (skb->len - offset == sizeof(u16)) {
+				rx->header = get_unaligned_le16(
+						skb->data + offset);
+				rx->split_head = true;
+				offset += sizeof(u16);
+				break;
+			}
+
+			if (rx->split_head == true) {
+				rx->header |= (get_unaligned_le16(
+						skb->data + offset) << 16);
+				rx->split_head = false;
+				offset += sizeof(u16);
+			} else {
+				rx->header = get_unaligned_le32(skb->data +
+								offset);
+				offset += sizeof(u32);
+			}
+
+			/* take frame length from Data header 32-bit word */
+			size = (u16)(rx->header & 0x7ff);
+			if (size != ((~rx->header >> 16) & 0x7ff)) {
+				netdev_err(dev->net, "asix_rx_fixup() Bad Header Length 0x%x, offset %d\n",
+					   rx->header, offset);
+				reset_asix_rx_fixup_info(rx);
+				return 0;
+			}
+			if (size > dev->net->mtu + ETH_HLEN + VLAN_HLEN) {
+				netdev_dbg(dev->net, "asix_rx_fixup() Bad RX Length %d\n",
+					   size);
+				reset_asix_rx_fixup_info(rx);
+				return 0;
+			}
+
+			/* Sometimes may fail to get a netdev socket buffer but
+			 * continue to process the URB socket buffer so that
+			 * synchronisation of the Ethernet frame Data header
+			 * word is maintained.
+			 */
+			rx->ax_skb = netdev_alloc_skb_ip_align(dev->net, size);
+
+			rx->remaining = size;
+		}
+
+		if (rx->remaining > skb->len - offset) {
+			copy_length = skb->len - offset;
+			rx->remaining -= copy_length;
+		} else {
+			copy_length = rx->remaining;
+			rx->remaining = 0;
+		}
+
+		if (rx->ax_skb) {
+			skb_put_data(rx->ax_skb, skb->data + offset,
+				     copy_length);
+			if (!rx->remaining) {
+				usbnet_skb_return(dev, rx->ax_skb);
+				rx->ax_skb = NULL;
+			}
+		}
+
+		offset += (copy_length + 1) & 0xfffe;
+	}
+
+	if (skb->len != offset) {
+		netdev_err(dev->net, "asix_rx_fixup() Bad SKB Length %d, %d\n",
+			   skb->len, offset);
+		reset_asix_rx_fixup_info(rx);
+		return 0;
+	}
+
+	return 1;
+}
+
+int asix_rx_fixup_common(struct usbnet *dev, struct sk_buff *skb)
+{
+	struct asix_common_private *dp = dev->driver_priv;
+	struct asix_rx_fixup_info *rx = &dp->rx_fixup_info;
+
+	return asix_rx_fixup_internal(dev, skb, rx);
+}
+
+void asix_rx_fixup_common_free(struct asix_common_private *dp)
+{
+	struct asix_rx_fixup_info *rx;
+
+	if (!dp)
+		return;
+
+	rx = &dp->rx_fixup_info;
+
+	if (rx->ax_skb) {
+		kfree_skb(rx->ax_skb);
+		rx->ax_skb = NULL;
+	}
+}
+
+struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
+			      gfp_t flags)
+{
+	int padlen;
+	int headroom = skb_headroom(skb);
+	int tailroom = skb_tailroom(skb);
+	u32 packet_len;
+	u32 padbytes = 0xffff0000;
+	void *ptr;
+
+	padlen = ((skb->len + 4) & (dev->maxpacket - 1)) ? 0 : 4;
+
+	/* We need to push 4 bytes in front of frame (packet_len)
+	 * and maybe add 4 bytes after the end (if padlen is 4)
+	 *
+	 * Avoid skb_copy_expand() expensive call, using following rules :
+	 * - We are allowed to push 4 bytes in headroom if skb_header_cloned()
+	 *   is false (and if we have 4 bytes of headroom)
+	 * - We are allowed to put 4 bytes at tail if skb_cloned()
+	 *   is false (and if we have 4 bytes of tailroom)
+	 *
+	 * TCP packets for example are cloned, but __skb_header_release()
+	 * was called in tcp stack, allowing us to use headroom for our needs.
+	 */
+	if (!skb_header_cloned(skb) &&
+	    !(padlen && skb_cloned(skb)) &&
+	    headroom + tailroom >= 4 + padlen) {
+		/* following should not happen, but better be safe */
+		if (headroom < 4 ||
+		    tailroom < padlen) {
+			skb->data = memmove(skb->head + 4, skb->data, skb->len);
+			skb_set_tail_pointer(skb, skb->len);
+		}
+	} else {
+		struct sk_buff *skb2;
+
+		skb2 = skb_copy_expand(skb, 4, padlen, flags);
+		dev_kfree_skb_any(skb);
+		skb = skb2;
+		if (!skb)
+			return NULL;
+	}
+
+	packet_len = ((skb->len ^ 0x0000ffff) << 16) + skb->len;
+	ptr = skb_push(skb, 4);
+	put_unaligned_le32(packet_len, ptr);
+
+	if (padlen) {
+		put_unaligned_le32(padbytes, skb_tail_pointer(skb));
+		skb_put(skb, sizeof(padbytes));
+	}
+
+	usbnet_set_skb_tx_stats(skb, 1, 0);
+	return skb;
+}
+
+int asix_read_phy_addr(struct usbnet *dev, bool internal)
+{
+	int ret, offset;
+	u8 buf[2];
+
+	ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf, 0);
+	if (ret < 0)
+		goto error;
+
+	if (ret < 2) {
+		ret = -EIO;
+		goto error;
+	}
+
+	offset = (internal ? 1 : 0);
+	ret = buf[offset];
+
+	netdev_dbg(dev->net, "%s PHY address 0x%x\n",
+		   internal ? "internal" : "external", ret);
+
+	return ret;
+
+error:
+	netdev_err(dev->net, "Error reading PHY_ID register: %02x\n", ret);
+
+	return ret;
+}
+
+int asix_sw_reset(struct usbnet *dev, u8 flags, int in_pm)
+{
+	int ret;
+
+	ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL, in_pm);
+	if (ret < 0)
+		netdev_err(dev->net, "Failed to send software reset: %02x\n", ret);
+
+	return ret;
+}
+
+u16 asix_read_rx_ctl(struct usbnet *dev, int in_pm)
+{
+	__le16 v;
+	int ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL, 0, 0, 2, &v, in_pm);
+
+	if (ret < 0) {
+		netdev_err(dev->net, "Error reading RX_CTL register: %02x\n", ret);
+		goto out;
+	}
+	ret = le16_to_cpu(v);
+out:
+	return ret;
+}
+
+int asix_write_rx_ctl(struct usbnet *dev, u16 mode, int in_pm)
+{
+	int ret;
+
+	netdev_dbg(dev->net, "asix_write_rx_ctl() - mode = 0x%04x\n", mode);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL, in_pm);
+	if (ret < 0)
+		netdev_err(dev->net, "Failed to write RX_CTL mode to 0x%04x: %02x\n",
+			   mode, ret);
+
+	return ret;
+}
+
+u16 asix_read_medium_status(struct usbnet *dev, int in_pm)
+{
+	__le16 v;
+	int ret = asix_read_cmd(dev, AX_CMD_READ_MEDIUM_STATUS,
+				0, 0, 2, &v, in_pm);
+
+	if (ret < 0) {
+		netdev_err(dev->net, "Error reading Medium Status register: %02x\n",
+			   ret);
+		return ret;	/* TODO: callers not checking for error ret */
+	}
+
+	return le16_to_cpu(v);
+
+}
+
+int asix_write_medium_mode(struct usbnet *dev, u16 mode, int in_pm)
+{
+	int ret;
+
+	netdev_dbg(dev->net, "asix_write_medium_mode() - mode = 0x%04x\n", mode);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE,
+			     mode, 0, 0, NULL, in_pm);
+	if (ret < 0)
+		netdev_err(dev->net, "Failed to write Medium Mode mode to 0x%04x: %02x\n",
+			   mode, ret);
+
+	return ret;
+}
+
+/* set MAC link settings according to information from phylib */
+void asix_adjust_link(struct net_device *netdev)
+{
+	struct phy_device *phydev = netdev->phydev;
+	struct usbnet *dev = netdev_priv(netdev);
+	u16 mode = 0;
+
+	if (phydev->link) {
+		mode = AX88772_MEDIUM_DEFAULT;
+
+		if (phydev->duplex == DUPLEX_HALF)
+			mode &= ~AX_MEDIUM_FD;
+
+		if (phydev->speed != SPEED_100)
+			mode &= ~AX_MEDIUM_PS;
+	}
+
+	asix_write_medium_mode(dev, mode, 0);
+	phy_print_status(phydev);
+	usbnet_link_change(dev, phydev->link, 0);
+}
+
+int asix_write_gpio(struct usbnet *dev, u16 value, int sleep, int in_pm)
+{
+	int ret;
+
+	netdev_dbg(dev->net, "asix_write_gpio() - value = 0x%04x\n", value);
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, value, 0, 0, NULL, in_pm);
+	if (ret < 0)
+		netdev_err(dev->net, "Failed to write GPIO value 0x%04x: %02x\n",
+			   value, ret);
+
+	if (sleep)
+		msleep(sleep);
+
+	return ret;
+}
+
+/*
+ * AX88772 & AX88178 have a 16-bit RX_CTL value
+ */
+void asix_set_multicast(struct net_device *net)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct asix_data *data = (struct asix_data *)&dev->data;
+	u16 rx_ctl = AX_DEFAULT_RX_CTL;
+
+	if (net->flags & IFF_PROMISC) {
+		rx_ctl |= AX_RX_CTL_PRO;
+	} else if (net->flags & IFF_ALLMULTI ||
+		   netdev_mc_count(net) > AX_MAX_MCAST) {
+		rx_ctl |= AX_RX_CTL_AMALL;
+	} else if (netdev_mc_empty(net)) {
+		/* just broadcast and directed */
+	} else {
+		/* We use the 20 byte dev->data
+		 * for our 8 byte filter buffer
+		 * to avoid allocating memory that
+		 * is tricky to free later */
+		struct netdev_hw_addr *ha;
+		u32 crc_bits;
+
+		memset(data->multi_filter, 0, AX_MCAST_FILTER_SIZE);
+
+		/* Build the multicast hash filter. */
+		netdev_for_each_mc_addr(ha, net) {
+			crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26;
+			data->multi_filter[crc_bits >> 3] |=
+			    1 << (crc_bits & 7);
+		}
+
+		asix_write_cmd_async(dev, AX_CMD_WRITE_MULTI_FILTER, 0, 0,
+				   AX_MCAST_FILTER_SIZE, data->multi_filter);
+
+		rx_ctl |= AX_RX_CTL_AM;
+	}
+
+	asix_write_cmd_async(dev, AX_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL);
+}
+
+static int __asix_mdio_read(struct net_device *netdev, int phy_id, int loc,
+			    bool in_pm)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	__le16 res;
+	int ret;
+
+	mutex_lock(&dev->phy_mutex);
+
+	ret = asix_check_host_enable(dev, in_pm);
+	if (ret == -ENODEV || ret == -ETIMEDOUT) {
+		mutex_unlock(&dev->phy_mutex);
+		return ret;
+	}
+
+	ret = asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id, (__u16)loc, 2,
+			    &res, in_pm);
+	if (ret < 0)
+		goto out;
+
+	ret = asix_set_hw_mii(dev, in_pm);
+out:
+	mutex_unlock(&dev->phy_mutex);
+
+	netdev_dbg(dev->net, "asix_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n",
+			phy_id, loc, le16_to_cpu(res));
+
+	return ret < 0 ? ret : le16_to_cpu(res);
+}
+
+int asix_mdio_read(struct net_device *netdev, int phy_id, int loc)
+{
+	return __asix_mdio_read(netdev, phy_id, loc, false);
+}
+
+static int __asix_mdio_write(struct net_device *netdev, int phy_id, int loc,
+			     int val, bool in_pm)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	__le16 res = cpu_to_le16(val);
+	int ret;
+
+	netdev_dbg(dev->net, "asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n",
+			phy_id, loc, val);
+
+	mutex_lock(&dev->phy_mutex);
+
+	ret = asix_check_host_enable(dev, in_pm);
+	if (ret == -ENODEV)
+		goto out;
+
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2,
+			     &res, in_pm);
+	if (ret < 0)
+		goto out;
+
+	ret = asix_set_hw_mii(dev, in_pm);
+out:
+	mutex_unlock(&dev->phy_mutex);
+
+	return ret < 0 ? ret : 0;
+}
+
+void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val)
+{
+	__asix_mdio_write(netdev, phy_id, loc, val, false);
+}
+
+/* MDIO read and write wrappers for phylib */
+int asix_mdio_bus_read(struct mii_bus *bus, int phy_id, int regnum)
+{
+	struct usbnet *priv = bus->priv;
+
+	return __asix_mdio_read(priv->net, phy_id, regnum, false);
+}
+
+int asix_mdio_bus_write(struct mii_bus *bus, int phy_id, int regnum, u16 val)
+{
+	struct usbnet *priv = bus->priv;
+
+	return __asix_mdio_write(priv->net, phy_id, regnum, val, false);
+}
+
+int asix_mdio_read_nopm(struct net_device *netdev, int phy_id, int loc)
+{
+	return __asix_mdio_read(netdev, phy_id, loc, true);
+}
+
+void
+asix_mdio_write_nopm(struct net_device *netdev, int phy_id, int loc, int val)
+{
+	__asix_mdio_write(netdev, phy_id, loc, val, true);
+}
+
+void asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
+{
+	struct usbnet *dev = netdev_priv(net);
+	u8 opt;
+
+	if (asix_read_cmd(dev, AX_CMD_READ_MONITOR_MODE,
+			  0, 0, 1, &opt, 0) < 0) {
+		wolinfo->supported = 0;
+		wolinfo->wolopts = 0;
+		return;
+	}
+	wolinfo->supported = WAKE_PHY | WAKE_MAGIC;
+	wolinfo->wolopts = 0;
+	if (opt & AX_MONITOR_LINK)
+		wolinfo->wolopts |= WAKE_PHY;
+	if (opt & AX_MONITOR_MAGIC)
+		wolinfo->wolopts |= WAKE_MAGIC;
+}
+
+int asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
+{
+	struct usbnet *dev = netdev_priv(net);
+	u8 opt = 0;
+
+	if (wolinfo->wolopts & ~(WAKE_PHY | WAKE_MAGIC))
+		return -EINVAL;
+
+	if (wolinfo->wolopts & WAKE_PHY)
+		opt |= AX_MONITOR_LINK;
+	if (wolinfo->wolopts & WAKE_MAGIC)
+		opt |= AX_MONITOR_MAGIC;
+
+	if (asix_write_cmd(dev, AX_CMD_WRITE_MONITOR_MODE,
+			      opt, 0, 0, NULL, 0) < 0)
+		return -EINVAL;
+
+	return 0;
+}
+
+int asix_get_eeprom_len(struct net_device *net)
+{
+	return AX_EEPROM_LEN;
+}
+
+int asix_get_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
+		    u8 *data)
+{
+	struct usbnet *dev = netdev_priv(net);
+	u16 *eeprom_buff;
+	int first_word, last_word;
+	int i;
+
+	if (eeprom->len == 0)
+		return -EINVAL;
+
+	eeprom->magic = AX_EEPROM_MAGIC;
+
+	first_word = eeprom->offset >> 1;
+	last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+
+	eeprom_buff = kmalloc_array(last_word - first_word + 1, sizeof(u16),
+				    GFP_KERNEL);
+	if (!eeprom_buff)
+		return -ENOMEM;
+
+	/* ax8817x returns 2 bytes from eeprom on read */
+	for (i = first_word; i <= last_word; i++) {
+		if (asix_read_cmd(dev, AX_CMD_READ_EEPROM, i, 0, 2,
+				  &eeprom_buff[i - first_word], 0) < 0) {
+			kfree(eeprom_buff);
+			return -EIO;
+		}
+	}
+
+	memcpy(data, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len);
+	kfree(eeprom_buff);
+	return 0;
+}
+
+int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
+		    u8 *data)
+{
+	struct usbnet *dev = netdev_priv(net);
+	u16 *eeprom_buff;
+	int first_word, last_word;
+	int i;
+	int ret;
+
+	netdev_dbg(net, "write EEPROM len %d, offset %d, magic 0x%x\n",
+		   eeprom->len, eeprom->offset, eeprom->magic);
+
+	if (eeprom->len == 0)
+		return -EINVAL;
+
+	if (eeprom->magic != AX_EEPROM_MAGIC)
+		return -EINVAL;
+
+	first_word = eeprom->offset >> 1;
+	last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+
+	eeprom_buff = kmalloc_array(last_word - first_word + 1, sizeof(u16),
+				    GFP_KERNEL);
+	if (!eeprom_buff)
+		return -ENOMEM;
+
+	/* align data to 16 bit boundaries, read the missing data from
+	   the EEPROM */
+	if (eeprom->offset & 1) {
+		ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, first_word, 0, 2,
+				    &eeprom_buff[0], 0);
+		if (ret < 0) {
+			netdev_err(net, "Failed to read EEPROM at offset 0x%02x.\n", first_word);
+			goto free;
+		}
+	}
+
+	if ((eeprom->offset + eeprom->len) & 1) {
+		ret = asix_read_cmd(dev, AX_CMD_READ_EEPROM, last_word, 0, 2,
+				    &eeprom_buff[last_word - first_word], 0);
+		if (ret < 0) {
+			netdev_err(net, "Failed to read EEPROM at offset 0x%02x.\n", last_word);
+			goto free;
+		}
+	}
+
+	memcpy((u8 *)eeprom_buff + (eeprom->offset & 1), data, eeprom->len);
+
+	/* write data to EEPROM */
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_ENABLE, 0x0000, 0, 0, NULL, 0);
+	if (ret < 0) {
+		netdev_err(net, "Failed to enable EEPROM write\n");
+		goto free;
+	}
+	msleep(20);
+
+	for (i = first_word; i <= last_word; i++) {
+		netdev_dbg(net, "write to EEPROM at offset 0x%02x, data 0x%04x\n",
+			   i, eeprom_buff[i - first_word]);
+		ret = asix_write_cmd(dev, AX_CMD_WRITE_EEPROM, i,
+				     eeprom_buff[i - first_word], 0, NULL, 0);
+		if (ret < 0) {
+			netdev_err(net, "Failed to write EEPROM at offset 0x%02x.\n",
+				   i);
+			goto free;
+		}
+		msleep(20);
+	}
+
+	ret = asix_write_cmd(dev, AX_CMD_WRITE_DISABLE, 0x0000, 0, 0, NULL, 0);
+	if (ret < 0) {
+		netdev_err(net, "Failed to disable EEPROM write\n");
+		goto free;
+	}
+
+	ret = 0;
+free:
+	kfree(eeprom_buff);
+	return ret;
+}
+
+void asix_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info)
+{
+	/* Inherit standard device info */
+	usbnet_get_drvinfo(net, info);
+	strscpy(info->driver, DRIVER_NAME, sizeof(info->driver));
+	strscpy(info->version, DRIVER_VERSION, sizeof(info->version));
+}
+
+int asix_set_mac_address(struct net_device *net, void *p)
+{
+	struct usbnet *dev = netdev_priv(net);
+	struct asix_data *data = (struct asix_data *)&dev->data;
+	struct sockaddr *addr = p;
+
+	if (netif_running(net))
+		return -EBUSY;
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EADDRNOTAVAIL;
+
+	eth_hw_addr_set(net, addr->sa_data);
+
+	/* We use the 20 byte dev->data
+	 * for our 6 byte mac buffer
+	 * to avoid allocating memory that
+	 * is tricky to free later */
+	memcpy(data->mac_addr, addr->sa_data, ETH_ALEN);
+	asix_write_cmd_async(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN,
+							data->mac_addr);
+
+	return 0;
+}