Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 698 insertions, 0 deletions

diff --git a/drivers/net/usb/cdc_mbim.c b/drivers/net/usb/cdc_mbim.c
new file mode 100644
index 000000000..cd4083e0b
--- /dev/null
+++ b/drivers/net/usb/cdc_mbim.c
@@ -0,0 +1,698 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2012  Smith Micro Software, Inc.
+ * Copyright (c) 2012  Bjørn Mork <bjorn@mork.no>
+ *
+ * This driver is based on and reuse most of cdc_ncm, which is
+ * Copyright (C) ST-Ericsson 2010-2012
+ */
+
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
+#include <linux/ip.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/usb/cdc.h>
+#include <linux/usb/usbnet.h>
+#include <linux/usb/cdc-wdm.h>
+#include <linux/usb/cdc_ncm.h>
+#include <net/ipv6.h>
+#include <net/addrconf.h>
+#include <net/ipv6_stubs.h>
+#include <net/ndisc.h>
+
+/* alternative VLAN for IP session 0 if not untagged */
+#define MBIM_IPS0_VID	4094
+
+/* driver specific data - must match cdc_ncm usage */
+struct cdc_mbim_state {
+	struct cdc_ncm_ctx *ctx;
+	atomic_t pmcount;
+	struct usb_driver *subdriver;
+	unsigned long _unused;
+	unsigned long flags;
+};
+
+/* flags for the cdc_mbim_state.flags field */
+enum cdc_mbim_flags {
+	FLAG_IPS0_VLAN = 1 << 0,	/* IP session 0 is tagged  */
+};
+
+/* using a counter to merge subdriver requests with our own into a combined state */
+static int cdc_mbim_manage_power(struct usbnet *dev, int on)
+{
+	struct cdc_mbim_state *info = (void *)&dev->data;
+	int rv = 0;
+
+	dev_dbg(&dev->intf->dev, "%s() pmcount=%d, on=%d\n", __func__, atomic_read(&info->pmcount), on);
+
+	if ((on && atomic_add_return(1, &info->pmcount) == 1) || (!on && atomic_dec_and_test(&info->pmcount))) {
+		/* need autopm_get/put here to ensure the usbcore sees the new value */
+		rv = usb_autopm_get_interface(dev->intf);
+		dev->intf->needs_remote_wakeup = on;
+		if (!rv)
+			usb_autopm_put_interface(dev->intf);
+	}
+	return 0;
+}
+
+static int cdc_mbim_wdm_manage_power(struct usb_interface *intf, int status)
+{
+	struct usbnet *dev = usb_get_intfdata(intf);
+
+	/* can be called while disconnecting */
+	if (!dev)
+		return 0;
+
+	return cdc_mbim_manage_power(dev, status);
+}
+
+static int cdc_mbim_rx_add_vid(struct net_device *netdev, __be16 proto, u16 vid)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	struct cdc_mbim_state *info = (void *)&dev->data;
+
+	/* creation of this VLAN is a request to tag IP session 0 */
+	if (vid == MBIM_IPS0_VID)
+		info->flags |= FLAG_IPS0_VLAN;
+	else
+		if (vid >= 512)	/* we don't map these to MBIM session */
+			return -EINVAL;
+	return 0;
+}
+
+static int cdc_mbim_rx_kill_vid(struct net_device *netdev, __be16 proto, u16 vid)
+{
+	struct usbnet *dev = netdev_priv(netdev);
+	struct cdc_mbim_state *info = (void *)&dev->data;
+
+	/* this is a request for an untagged IP session 0 */
+	if (vid == MBIM_IPS0_VID)
+		info->flags &= ~FLAG_IPS0_VLAN;
+	return 0;
+}
+
+static const struct net_device_ops cdc_mbim_netdev_ops = {
+	.ndo_open             = usbnet_open,
+	.ndo_stop             = usbnet_stop,
+	.ndo_start_xmit       = usbnet_start_xmit,
+	.ndo_tx_timeout       = usbnet_tx_timeout,
+	.ndo_get_stats64      = dev_get_tstats64,
+	.ndo_change_mtu       = cdc_ncm_change_mtu,
+	.ndo_set_mac_address  = eth_mac_addr,
+	.ndo_validate_addr    = eth_validate_addr,
+	.ndo_vlan_rx_add_vid  = cdc_mbim_rx_add_vid,
+	.ndo_vlan_rx_kill_vid = cdc_mbim_rx_kill_vid,
+};
+
+/* Change the control interface altsetting and update the .driver_info
+ * pointer if the matching entry after changing class codes points to
+ * a different struct
+ */
+static int cdc_mbim_set_ctrlalt(struct usbnet *dev, struct usb_interface *intf, u8 alt)
+{
+	struct usb_driver *driver = to_usb_driver(intf->dev.driver);
+	const struct usb_device_id *id;
+	struct driver_info *info;
+	int ret;
+
+	ret = usb_set_interface(dev->udev,
+				intf->cur_altsetting->desc.bInterfaceNumber,
+				alt);
+	if (ret)
+		return ret;
+
+	id = usb_match_id(intf, driver->id_table);
+	if (!id)
+		return -ENODEV;
+
+	info = (struct driver_info *)id->driver_info;
+	if (info != dev->driver_info) {
+		dev_dbg(&intf->dev, "driver_info updated to '%s'\n",
+			info->description);
+		dev->driver_info = info;
+	}
+	return 0;
+}
+
+static int cdc_mbim_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+	struct cdc_ncm_ctx *ctx;
+	struct usb_driver *subdriver = ERR_PTR(-ENODEV);
+	int ret = -ENODEV;
+	u8 data_altsetting = 1;
+	struct cdc_mbim_state *info = (void *)&dev->data;
+
+	/* should we change control altsetting on a NCM/MBIM function? */
+	if (cdc_ncm_select_altsetting(intf) == CDC_NCM_COMM_ALTSETTING_MBIM) {
+		data_altsetting = CDC_NCM_DATA_ALTSETTING_MBIM;
+		ret = cdc_mbim_set_ctrlalt(dev, intf, CDC_NCM_COMM_ALTSETTING_MBIM);
+		if (ret)
+			goto err;
+		ret = -ENODEV;
+	}
+
+	/* we will hit this for NCM/MBIM functions if prefer_mbim is false */
+	if (!cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting))
+		goto err;
+
+	ret = cdc_ncm_bind_common(dev, intf, data_altsetting, dev->driver_info->data);
+	if (ret)
+		goto err;
+
+	ctx = info->ctx;
+
+	/* The MBIM descriptor and the status endpoint are required */
+	if (ctx->mbim_desc && dev->status)
+		subdriver = usb_cdc_wdm_register(ctx->control,
+						 &dev->status->desc,
+						 le16_to_cpu(ctx->mbim_desc->wMaxControlMessage),
+						 WWAN_PORT_MBIM,
+						 cdc_mbim_wdm_manage_power);
+	if (IS_ERR(subdriver)) {
+		ret = PTR_ERR(subdriver);
+		cdc_ncm_unbind(dev, intf);
+		goto err;
+	}
+
+	/* can't let usbnet use the interrupt endpoint */
+	dev->status = NULL;
+	info->subdriver = subdriver;
+
+	/* MBIM cannot do ARP */
+	dev->net->flags |= IFF_NOARP;
+
+	/* no need to put the VLAN tci in the packet headers */
+	dev->net->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_FILTER;
+
+	/* monitor VLAN additions and removals */
+	dev->net->netdev_ops = &cdc_mbim_netdev_ops;
+err:
+	return ret;
+}
+
+static void cdc_mbim_unbind(struct usbnet *dev, struct usb_interface *intf)
+{
+	struct cdc_mbim_state *info = (void *)&dev->data;
+	struct cdc_ncm_ctx *ctx = info->ctx;
+
+	/* disconnect subdriver from control interface */
+	if (info->subdriver && info->subdriver->disconnect)
+		info->subdriver->disconnect(ctx->control);
+	info->subdriver = NULL;
+
+	/* let NCM unbind clean up both control and data interface */
+	cdc_ncm_unbind(dev, intf);
+}
+
+/* verify that the ethernet protocol is IPv4 or IPv6 */
+static bool is_ip_proto(__be16 proto)
+{
+	switch (proto) {
+	case htons(ETH_P_IP):
+	case htons(ETH_P_IPV6):
+		return true;
+	}
+	return false;
+}
+
+static struct sk_buff *cdc_mbim_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
+{
+	struct sk_buff *skb_out;
+	struct cdc_mbim_state *info = (void *)&dev->data;
+	struct cdc_ncm_ctx *ctx = info->ctx;
+	__le32 sign = cpu_to_le32(USB_CDC_MBIM_NDP16_IPS_SIGN);
+	u16 tci = 0;
+	bool is_ip;
+	u8 *c;
+
+	if (!ctx)
+		goto error;
+
+	if (skb) {
+		if (skb->len <= ETH_HLEN)
+			goto error;
+
+		/* Some applications using e.g. packet sockets will
+		 * bypass the VLAN acceleration and create tagged
+		 * ethernet frames directly.  We primarily look for
+		 * the accelerated out-of-band tag, but fall back if
+		 * required
+		 */
+		skb_reset_mac_header(skb);
+		if (vlan_get_tag(skb, &tci) < 0 && skb->len > VLAN_ETH_HLEN &&
+		    __vlan_get_tag(skb, &tci) == 0) {
+			is_ip = is_ip_proto(vlan_eth_hdr(skb)->h_vlan_encapsulated_proto);
+			skb_pull(skb, VLAN_ETH_HLEN);
+		} else {
+			is_ip = is_ip_proto(eth_hdr(skb)->h_proto);
+			skb_pull(skb, ETH_HLEN);
+		}
+
+		/* Is IP session <0> tagged too? */
+		if (info->flags & FLAG_IPS0_VLAN) {
+			/* drop all untagged packets */
+			if (!tci)
+				goto error;
+			/* map MBIM_IPS0_VID to IPS<0> */
+			if (tci == MBIM_IPS0_VID)
+				tci = 0;
+		}
+
+		/* mapping VLANs to MBIM sessions:
+		 *   no tag     => IPS session <0> if !FLAG_IPS0_VLAN
+		 *   1 - 255    => IPS session <vlanid>
+		 *   256 - 511  => DSS session <vlanid - 256>
+		 *   512 - 4093 => unsupported, drop
+		 *   4094       => IPS session <0> if FLAG_IPS0_VLAN
+		 */
+
+		switch (tci & 0x0f00) {
+		case 0x0000: /* VLAN ID 0 - 255 */
+			if (!is_ip)
+				goto error;
+			c = (u8 *)&sign;
+			c[3] = tci;
+			break;
+		case 0x0100: /* VLAN ID 256 - 511 */
+			if (is_ip)
+				goto error;
+			sign = cpu_to_le32(USB_CDC_MBIM_NDP16_DSS_SIGN);
+			c = (u8 *)&sign;
+			c[3] = tci;
+			break;
+		default:
+			netif_err(dev, tx_err, dev->net,
+				  "unsupported tci=0x%04x\n", tci);
+			goto error;
+		}
+	}
+
+	spin_lock_bh(&ctx->mtx);
+	skb_out = cdc_ncm_fill_tx_frame(dev, skb, sign);
+	spin_unlock_bh(&ctx->mtx);
+	return skb_out;
+
+error:
+	if (skb)
+		dev_kfree_skb_any(skb);
+
+	return NULL;
+}
+
+/* Some devices are known to send Neighbor Solicitation messages and
+ * require Neighbor Advertisement replies.  The IPv6 core will not
+ * respond since IFF_NOARP is set, so we must handle them ourselves.
+ */
+static void do_neigh_solicit(struct usbnet *dev, u8 *buf, u16 tci)
+{
+	struct ipv6hdr *iph = (void *)buf;
+	struct nd_msg *msg = (void *)(iph + 1);
+	struct net_device *netdev;
+	struct inet6_dev *in6_dev;
+	bool is_router;
+
+	/* we'll only respond to requests from unicast addresses to
+	 * our solicited node addresses.
+	 */
+	if (!ipv6_addr_is_solict_mult(&iph->daddr) ||
+	    !(ipv6_addr_type(&iph->saddr) & IPV6_ADDR_UNICAST))
+		return;
+
+	/* need to send the NA on the VLAN dev, if any */
+	rcu_read_lock();
+	if (tci) {
+		netdev = __vlan_find_dev_deep_rcu(dev->net, htons(ETH_P_8021Q),
+						  tci);
+		if (!netdev) {
+			rcu_read_unlock();
+			return;
+		}
+	} else {
+		netdev = dev->net;
+	}
+	dev_hold(netdev);
+	rcu_read_unlock();
+
+	in6_dev = in6_dev_get(netdev);
+	if (!in6_dev)
+		goto out;
+	is_router = !!in6_dev->cnf.forwarding;
+	in6_dev_put(in6_dev);
+
+	/* ipv6_stub != NULL if in6_dev_get returned an inet6_dev */
+	ipv6_stub->ndisc_send_na(netdev, &iph->saddr, &msg->target,
+				 is_router /* router */,
+				 true /* solicited */,
+				 false /* override */,
+				 true /* inc_opt */);
+out:
+	dev_put(netdev);
+}
+
+static bool is_neigh_solicit(u8 *buf, size_t len)
+{
+	struct ipv6hdr *iph = (void *)buf;
+	struct nd_msg *msg = (void *)(iph + 1);
+
+	return (len >= sizeof(struct ipv6hdr) + sizeof(struct nd_msg) &&
+		iph->nexthdr == IPPROTO_ICMPV6 &&
+		msg->icmph.icmp6_code == 0 &&
+		msg->icmph.icmp6_type == NDISC_NEIGHBOUR_SOLICITATION);
+}
+
+
+static struct sk_buff *cdc_mbim_process_dgram(struct usbnet *dev, u8 *buf, size_t len, u16 tci)
+{
+	__be16 proto = htons(ETH_P_802_3);
+	struct sk_buff *skb = NULL;
+
+	if (tci < 256 || tci == MBIM_IPS0_VID) { /* IPS session? */
+		if (len < sizeof(struct iphdr))
+			goto err;
+
+		switch (*buf & 0xf0) {
+		case 0x40:
+			proto = htons(ETH_P_IP);
+			break;
+		case 0x60:
+			if (is_neigh_solicit(buf, len))
+				do_neigh_solicit(dev, buf, tci);
+			proto = htons(ETH_P_IPV6);
+			break;
+		default:
+			goto err;
+		}
+	}
+
+	skb = netdev_alloc_skb_ip_align(dev->net,  len + ETH_HLEN);
+	if (!skb)
+		goto err;
+
+	/* add an ethernet header */
+	skb_put(skb, ETH_HLEN);
+	skb_reset_mac_header(skb);
+	eth_hdr(skb)->h_proto = proto;
+	eth_zero_addr(eth_hdr(skb)->h_source);
+	memcpy(eth_hdr(skb)->h_dest, dev->net->dev_addr, ETH_ALEN);
+
+	/* add datagram */
+	skb_put_data(skb, buf, len);
+
+	/* map MBIM session to VLAN */
+	if (tci)
+		__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), tci);
+err:
+	return skb;
+}
+
+static int cdc_mbim_rx_fixup(struct usbnet *dev, struct sk_buff *skb_in)
+{
+	struct sk_buff *skb;
+	struct cdc_mbim_state *info = (void *)&dev->data;
+	struct cdc_ncm_ctx *ctx = info->ctx;
+	int len;
+	int nframes;
+	int x;
+	int offset;
+	struct usb_cdc_ncm_ndp16 *ndp16;
+	struct usb_cdc_ncm_dpe16 *dpe16;
+	int ndpoffset;
+	int loopcount = 50; /* arbitrary max preventing infinite loop */
+	u32 payload = 0;
+	u8 *c;
+	u16 tci;
+
+	ndpoffset = cdc_ncm_rx_verify_nth16(ctx, skb_in);
+	if (ndpoffset < 0)
+		goto error;
+
+next_ndp:
+	nframes = cdc_ncm_rx_verify_ndp16(skb_in, ndpoffset);
+	if (nframes < 0)
+		goto error;
+
+	ndp16 = (struct usb_cdc_ncm_ndp16 *)(skb_in->data + ndpoffset);
+
+	switch (ndp16->dwSignature & cpu_to_le32(0x00ffffff)) {
+	case cpu_to_le32(USB_CDC_MBIM_NDP16_IPS_SIGN):
+		c = (u8 *)&ndp16->dwSignature;
+		tci = c[3];
+		/* tag IPS<0> packets too if MBIM_IPS0_VID exists */
+		if (!tci && info->flags & FLAG_IPS0_VLAN)
+			tci = MBIM_IPS0_VID;
+		break;
+	case cpu_to_le32(USB_CDC_MBIM_NDP16_DSS_SIGN):
+		c = (u8 *)&ndp16->dwSignature;
+		tci = c[3] + 256;
+		break;
+	default:
+		netif_dbg(dev, rx_err, dev->net,
+			  "unsupported NDP signature <0x%08x>\n",
+			  le32_to_cpu(ndp16->dwSignature));
+		goto err_ndp;
+
+	}
+
+	dpe16 = ndp16->dpe16;
+	for (x = 0; x < nframes; x++, dpe16++) {
+		offset = le16_to_cpu(dpe16->wDatagramIndex);
+		len = le16_to_cpu(dpe16->wDatagramLength);
+
+		/*
+		 * CDC NCM ch. 3.7
+		 * All entries after first NULL entry are to be ignored
+		 */
+		if ((offset == 0) || (len == 0)) {
+			if (!x)
+				goto err_ndp; /* empty NTB */
+			break;
+		}
+
+		/* sanity checking */
+		if (((offset + len) > skb_in->len) || (len > ctx->rx_max)) {
+			netif_dbg(dev, rx_err, dev->net,
+				  "invalid frame detected (ignored) offset[%u]=%u, length=%u, skb=%p\n",
+				  x, offset, len, skb_in);
+			if (!x)
+				goto err_ndp;
+			break;
+		} else {
+			skb = cdc_mbim_process_dgram(dev, skb_in->data + offset, len, tci);
+			if (!skb)
+				goto error;
+			usbnet_skb_return(dev, skb);
+			payload += len;	/* count payload bytes in this NTB */
+		}
+	}
+err_ndp:
+	/* are there more NDPs to process? */
+	ndpoffset = le16_to_cpu(ndp16->wNextNdpIndex);
+	if (ndpoffset && loopcount--)
+		goto next_ndp;
+
+	/* update stats */
+	ctx->rx_overhead += skb_in->len - payload;
+	ctx->rx_ntbs++;
+
+	return 1;
+error:
+	return 0;
+}
+
+static int cdc_mbim_suspend(struct usb_interface *intf, pm_message_t message)
+{
+	int ret = -ENODEV;
+	struct usbnet *dev = usb_get_intfdata(intf);
+	struct cdc_mbim_state *info = (void *)&dev->data;
+	struct cdc_ncm_ctx *ctx = info->ctx;
+
+	if (!ctx)
+		goto error;
+
+	/*
+	 * Both usbnet_suspend() and subdriver->suspend() MUST return 0
+	 * in system sleep context, otherwise, the resume callback has
+	 * to recover device from previous suspend failure.
+	 */
+	ret = usbnet_suspend(intf, message);
+	if (ret < 0)
+		goto error;
+
+	if (intf == ctx->control && info->subdriver && info->subdriver->suspend)
+		ret = info->subdriver->suspend(intf, message);
+	if (ret < 0)
+		usbnet_resume(intf);
+
+error:
+	return ret;
+}
+
+static int cdc_mbim_resume(struct usb_interface *intf)
+{
+	int  ret = 0;
+	struct usbnet *dev = usb_get_intfdata(intf);
+	struct cdc_mbim_state *info = (void *)&dev->data;
+	struct cdc_ncm_ctx *ctx = info->ctx;
+	bool callsub = (intf == ctx->control && info->subdriver && info->subdriver->resume);
+
+	if (callsub)
+		ret = info->subdriver->resume(intf);
+	if (ret < 0)
+		goto err;
+	ret = usbnet_resume(intf);
+	if (ret < 0 && callsub)
+		info->subdriver->suspend(intf, PMSG_SUSPEND);
+err:
+	return ret;
+}
+
+static const struct driver_info cdc_mbim_info = {
+	.description = "CDC MBIM",
+	.flags = FLAG_NO_SETINT | FLAG_MULTI_PACKET | FLAG_WWAN,
+	.bind = cdc_mbim_bind,
+	.unbind = cdc_mbim_unbind,
+	.manage_power = cdc_mbim_manage_power,
+	.rx_fixup = cdc_mbim_rx_fixup,
+	.tx_fixup = cdc_mbim_tx_fixup,
+};
+
+/* MBIM and NCM devices should not need a ZLP after NTBs with
+ * dwNtbOutMaxSize length. Nevertheless, a number of devices from
+ * different vendor IDs will fail unless we send ZLPs, forcing us
+ * to make this the default.
+ *
+ * This default may cause a performance penalty for spec conforming
+ * devices wanting to take advantage of optimizations possible without
+ * ZLPs.  A whitelist is added in an attempt to avoid this for devices
+ * known to conform to the MBIM specification.
+ *
+ * All known devices supporting NCM compatibility mode are also
+ * conforming to the NCM and MBIM specifications. For this reason, the
+ * NCM subclass entry is also in the ZLP whitelist.
+ */
+static const struct driver_info cdc_mbim_info_zlp = {
+	.description = "CDC MBIM",
+	.flags = FLAG_NO_SETINT | FLAG_MULTI_PACKET | FLAG_WWAN | FLAG_SEND_ZLP,
+	.bind = cdc_mbim_bind,
+	.unbind = cdc_mbim_unbind,
+	.manage_power = cdc_mbim_manage_power,
+	.rx_fixup = cdc_mbim_rx_fixup,
+	.tx_fixup = cdc_mbim_tx_fixup,
+};
+
+/* The spefication explicitly allows NDPs to be placed anywhere in the
+ * frame, but some devices fail unless the NDP is placed after the IP
+ * packets.  Using the CDC_NCM_FLAG_NDP_TO_END flags to force this
+ * behaviour.
+ *
+ * Note: The current implementation of this feature restricts each NTB
+ * to a single NDP, implying that multiplexed sessions cannot share an
+ * NTB. This might affect performance for multiplexed sessions.
+ */
+static const struct driver_info cdc_mbim_info_ndp_to_end = {
+	.description = "CDC MBIM",
+	.flags = FLAG_NO_SETINT | FLAG_MULTI_PACKET | FLAG_WWAN,
+	.bind = cdc_mbim_bind,
+	.unbind = cdc_mbim_unbind,
+	.manage_power = cdc_mbim_manage_power,
+	.rx_fixup = cdc_mbim_rx_fixup,
+	.tx_fixup = cdc_mbim_tx_fixup,
+	.data = CDC_NCM_FLAG_NDP_TO_END,
+};
+
+/* Some modems (e.g. Telit LE922A6) do not work properly with altsetting
+ * toggle done in cdc_ncm_bind_common. CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE
+ * flag is used to avoid this procedure.
+ */
+static const struct driver_info cdc_mbim_info_avoid_altsetting_toggle = {
+	.description = "CDC MBIM",
+	.flags = FLAG_NO_SETINT | FLAG_MULTI_PACKET | FLAG_WWAN | FLAG_SEND_ZLP,
+	.bind = cdc_mbim_bind,
+	.unbind = cdc_mbim_unbind,
+	.manage_power = cdc_mbim_manage_power,
+	.rx_fixup = cdc_mbim_rx_fixup,
+	.tx_fixup = cdc_mbim_tx_fixup,
+	.data = CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE,
+};
+
+static const struct usb_device_id mbim_devs[] = {
+	/* This duplicate NCM entry is intentional. MBIM devices can
+	 * be disguised as NCM by default, and this is necessary to
+	 * allow us to bind the correct driver_info to such devices.
+	 *
+	 * bind() will sort out this for us, selecting the correct
+	 * entry and reject the other
+	 */
+	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_NCM, USB_CDC_PROTO_NONE),
+	  .driver_info = (unsigned long)&cdc_mbim_info,
+	},
+	/* ZLP conformance whitelist: All Ericsson MBIM devices */
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x0bdb, USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
+	  .driver_info = (unsigned long)&cdc_mbim_info,
+	},
+
+	/* Some Huawei devices, ME906s-158 (12d1:15c1) and E3372
+	 * (12d1:157d), are known to fail unless the NDP is placed
+	 * after the IP packets.  Applying the quirk to all Huawei
+	 * devices is broader than necessary, but harmless.
+	 */
+	{ USB_VENDOR_AND_INTERFACE_INFO(0x12d1, USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
+	  .driver_info = (unsigned long)&cdc_mbim_info_ndp_to_end,
+	},
+
+	/* The HP lt4132 (03f0:a31d) is a rebranded Huawei ME906s-158,
+	 * therefore it too requires the above "NDP to end" quirk.
+	 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0xa31d, USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
+	  .driver_info = (unsigned long)&cdc_mbim_info_ndp_to_end,
+	},
+
+	/* Telit LE922A6 in MBIM composition */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1bc7, 0x1041, USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
+	  .driver_info = (unsigned long)&cdc_mbim_info_avoid_altsetting_toggle,
+	},
+
+	/* Telit LN920 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1bc7, 0x1061, USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
+	  .driver_info = (unsigned long)&cdc_mbim_info_avoid_altsetting_toggle,
+	},
+
+	/* Telit FN990 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1bc7, 0x1071, USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
+	  .driver_info = (unsigned long)&cdc_mbim_info_avoid_altsetting_toggle,
+	},
+
+	/* Telit FE990 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1bc7, 0x1081, USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
+	  .driver_info = (unsigned long)&cdc_mbim_info_avoid_altsetting_toggle,
+	},
+
+	/* default entry */
+	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
+	  .driver_info = (unsigned long)&cdc_mbim_info_zlp,
+	},
+	{
+	},
+};
+MODULE_DEVICE_TABLE(usb, mbim_devs);
+
+static struct usb_driver cdc_mbim_driver = {
+	.name = "cdc_mbim",
+	.id_table = mbim_devs,
+	.probe = usbnet_probe,
+	.disconnect = usbnet_disconnect,
+	.suspend = cdc_mbim_suspend,
+	.resume = cdc_mbim_resume,
+	.reset_resume =	cdc_mbim_resume,
+	.supports_autosuspend = 1,
+	.disable_hub_initiated_lpm = 1,
+};
+module_usb_driver(cdc_mbim_driver);
+
+MODULE_AUTHOR("Greg Suarez <gsuarez@smithmicro.com>");
+MODULE_AUTHOR("Bjørn Mork <bjorn@mork.no>");
+MODULE_DESCRIPTION("USB CDC MBIM host driver");
+MODULE_LICENSE("GPL");